+ All Categories
Home > Documents > SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features...

SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features...

Date post: 20-Apr-2018
Category:
Upload: ngotuong
View: 224 times
Download: 7 times
Share this document with a friend
107
(April, 2013 to March, 2015) SALIENT FEATURES OF MACHINES TESTED Government of India Ministry of Agriculture and Farmers Welfare (Department of Agriculture, Cooperation and Farmers Welfare) Southern Region Farm Machinery Training and Testing Institute Tractor Nagar, Garladinne- 515 731, District: Anantapur (A.P.) [ISO 9001:2008 COMPLIANT INSTITUTION]
Transcript
Page 1: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

(April, 2013 to March, 2015)

SALIENT FEATURES

OF

MACHINES TESTED

Government of India

Ministry of Agriculture and Farmers Welfare

(Department of Agriculture, Cooperation and Farmers Welfare)

Southern Region Farm Machinery Training and Testing Institute

Tractor Nagar, Garladinne- 515 731, District: Anantapur (A.P.)

[ISO 9001:2008 COMPLIANT INSTITUTION]

Page 2: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

Compiled by

P.K. PANDEY, DIRECTOR

Published by

Government of India

Ministry of Agriculture and Farmers Welfare

(Department of Agriculture, Cooperation and Farmers Welfare)

Southern Region Farm Machinery Training and Testing Institute

Tractor Nagar, Garladinne- 515 731, District: Anantapur (A.P.)

[ISO 9001:2008 COMPLIANT INSTITUTION]

This report is published for the sake of information and information alone. Every

effort has been made to maintain the accuracy, but still can’t be claimed to be flawless.

Therefore readers are requested to refer to the Test Reports for details before arriving at

any final conclusion.

Further it is bring to the notice of readers that this report should not be taken, in any

ways, as endorsing any product. This is merely the summery of the Commercial Test

Report published by this Institute.

Page 3: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

PREFACE

P.K.PANDEY, DIRECTOR

Improved and quality agricultural machinery play a pivotal role in sustainable development of agriculture and enhancement of production and productivity.

In the milieu of Barrier-Free-Trade and Globalization, the identification of quality machinery becomes even more essential than ever before, and this is, precisely where, the necessity of testing of machinery by an Independent agency emerges. Historically, it was in the year 1920 that the University of Nebraska, USA, started the Testing of Tractors with a view to ensure the tractors were performing to the manufacturers’ claim. In India, testing of Tractors and other agricultural machinery began in 1960-61.

The Southern Region Farm Machinery Training and Testing Institute, Anantapur, began its testing activities in the year 1989-90; however, this Institute came to be authorized for Power Tiller Testing around in the year 2007 only. Upto the March, 2015, this Institute has tested 495 machinery including 72 Power Tillers.

In view of the fact that the test report of any machine contains 30 to 40 pages, the operational guidelines on “SUB-MISSION ON AGRICULTURAL MECHANIZATION” came to suggest that testing institutions will bring out one page salient features of the machine tested for easy understanding by the users.It is noted with great pleasure that This Institute has earned the distinction of being the first and the only FMTTI, till date, of Mechanization & Technology Division of the Ministry, to provide the salient features of the machines tested at this institute, in its websites. In compliance with the guidelines, the compiled material is brought out in this report contains the salient features of the machines tested (Commercial Test) during 2013-14 and 2014-15 including those of Power Tillers.

In the compilation of this report assistance of S/Shri Y.Koteswara Rao, Senior Agricultural Engineer; M.S.Md Ali Moula, Senior Technician; C.V.Kiran, Technician; G.Prathap Reddy; M.Shahinabi and N.Naresh is thankfully acknowledged.

I am sure this publication would be useful to the farmers, manufacturers, research organizations, state department of agriculture, extension workers, state agro industries and financial institutions.

P.K.PANDEY DIRECTOR

Page 4: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

C O N T E N T S

SL.

NO. : NAME OF MACHINE/ IMPLEMENT : PAGE NO.

1 : Kranti DI 1515 DF Power Tiller : 1

2 :

Kranti DI 1515 GN Power Tiller :

2

3 :

Shrachi Shaktiman Power Tiller :

3

4 :

Souza RT 125 DI Power Tiller :

4

5 :

OTAKE MJ-3 2ROW PADDY WEEDER :

5

6 :

SHB DI Power Tiller :

6

7 : SOUZA SZ-450 MINI POWER TILLER

(TILLING TYPE)

: 7

8 : SHRACHI 105 POWER WEEDER : 8

9 :

SOUZA 1Z-20 ROTARY WEEDER 800 :

9

10 : KAMCO KMB 200 Power Tiller : 10

11 :

PACE 14 DI Power Tiller :

11

12 : KALINGA SHAKTHI KS – 125 DI Power Tiller : 12

13 :

KAWASHIMA 650 N Power Weeder :

13

Page 5: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

14 : KALINGA SHAKTHI KS – 120 Power Tiller : 14

15 :

KALINGA SHAKTHI KS – 145 Power Tiller :

15

16 : Changzhou GN-151 Power Tiller : 16

17 :

Bharat Heavy Duty Two Bottom M.B. Plough :

17

18 : Briggs 3PT 1000D Light Weight Power Tiller (Tilling Type)

: 18

19 : Mitsubishi Shakti CT 85 Power Tiller [With

VWH Engine]

: 19

20 : VST Shakti 130DI Power Tiller : 20

21 :

Kawashima 850S Power Weeder :

21

22 : Kawashima KT400 Power weeder : 22

23 :

Jay JD-224 Power weeder :

23

24 : RHINO Super RH 12 DI Power tiller : 24

25 :

Kranti IND-180 Power tiller :

25

26 : Kranti IND-230 Power tiller : 26

27 :

VIJAY XG 430 Weeder :

27

28 : Yanmar VP6D Rice Transplanter : 28

29 :

Yanmar VP8DN Rice Transplanter :

29

30 : Pagariya 15DI Power Tiller : 30

Page 6: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

31 :

SOUZA SZC-T 208 Power Weeder-660 :

31

32 : SHAKTIMAN SRP 6/1000 Rotary Plough : 32

33 :

KAMCO Super DI Power Tiller :

33

34 : SHAKTIMAN SRP 5/1000 Rotary Plough : 34

35 :

KRUSHIVATOR 2.00 Mtr. Rotavator :

35

36 : INDRA MARSHAL Power Tiller : 36

37 :

SOUZA KMG 31 B Brush Cutter :

37

38 : VIJAY CG 430GB Brush Cutter : 38

39 : Redlands RP824 Self Propelled Riding Type

Rice Transplanter

: 39

40 : Pragati Seed Cum Fertilizer Drill (Tractor Mounted)

: 40

41 : I Khodal Param-5 Rotavator (Tractor

Mounted)

: 41

42 : Pragati Terracer Blade (Tractor Mounted) : 42

43 :

SHAKTIMAN SRP 2.5/540 Rotary Plough :

43

44 : SHAKTIMAN SRP 3.25/1000 Rotary Plough : 44

45 :

SHAKTIMAN SRP 4/1000 Rotary Plough :

45

46 : I Khodal Param-6 Rotavator (Tractor Mounted)

: 46

47 :

Souza SZ - 15 Power Tiller (Tilling Type) :

47

Page 7: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

48 : Souza SF - 15 Power Tiller (Tilling Type) : 48

49 : I Khodal Param-4 Rotavator (Tractor

Mounted)

: 49

50 : Maijo DFAM DF-15 DIL Power Tiller : 50

51 :

Priya Reaper (Tractor Front Mounted) :

51

52 : ACE RTT 2Z-6300B-SL-Z-E-P Self Propelled Riding Type 6 Row Rice Transplanter

: 52

53 :

Texas Pro Trac 950D Power Weeder :

53

54 : VIJAY 3 WPW Wet Paddy Weeder : 54

55 : ACE RTT 2Z-8238B-SL-Z-E-P Self Propelled

Riding Type 8 Row Rice Transplanter

: 55

56 : VIJAY 2 WPW Wet Paddy Weeder : 56

57 :

Texas Pro Trac 750D Power Weeder :

57

58 : Texas RT 450D Power Weeder : 58

59 :

Texas Hobby 380 TG Power Weeder :

59

60 : Texas Hobby 500 TG Power Weeder : 60

61 :

Texas Alligator 6DP Power Weeder :

61

62 : Texas Lilli 532 TG Power Weeder : 62

63 :

Texas TX 601 TG Power Weeder :

63

64 : Shaktiman STMP-26 Self Propelled Platform For Tree Maintenance

: 64

Page 8: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

65 :

DFAMGC DF-15DLG Power Tiller :

65

66 : Rhino RH 178F Power Weeder : 66

67 :

Shaktiman SMS 540 S Mobile Shredder :

67

68 : GREAVES GS 14 DIL POWER TILLER : 68

69 :

GREAVES GS 14 DLX POWER TILLER :

69

70 : GREAVES GS 15 DIL S POWER TILLER

: 70

71 : RHINO 15 DI POWER TILLER

: 71

72 : ESCORTS NSE RP ROTOPUDDLER : 72

73 : JK-150 ROTAVATOR

: 73

74 : JK-180 ROTAVATOR : 74

75 :

Gousiya Engineering GS-150 ROTAVATOR :

75

76 : FARMAK FMK-150 ROTAVATOR : 76

77 :

FARMAK FMK-180 ROTAVATOR :

77

78 : FARMAK FMK-8 ROW SEED CUM FERTILIZER DRILL

: 78

79 :

BHEEM BMRT5C ROTAVATOR :

79

80 : BHEEM BMRT6C ROTAVATOR : 80

81 :

GREAVES GS 15 DIL POWER TILLER :

81

Page 9: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

82 : ACE APT-15 POWER TILLER : 82

83 : RHINO RH 8 SELF PROPELLED RIDING

TYPE RICE TRANSPLANTER

: 83

84 : VARUSHAPRIYA RGO 60 SD SELF PROPELLED RIDING TYPE RICE TRANSPLANTER

: 84

85 : VARUSHAPRIYA RGO 60 SELF PROPELLED

RIDING TYPE RICE TRANSPLANTER

: 85

86 : VARUSHAPRIYA RR4B SELF PROPELLED WALK BEHIND RICE TRANSPLANTER

: 86

87 :

Shrachi SF 15 DI Power Tiller :

87

88 : Shrachi Sarpanch Power Tiller : 88

89 :

John Deere 3419RT Paddy Rotary Tiller :

89

90 : Bheem Pixel BM 200 Power Weeder : 90

91 :

Bheem Baby BM 170 Power Weeder :

91

92 : Vijay 1 WPW Wet Paddy Weeder : 92

93 :

Bheem BM 33B Brush Cutter :

93

94 : Bheem BM 175 Paddy Weeder : 94

95 : Autoprint Terravate PTV55G Power Tiller

(Tilling Type)

: 95

96 : Autoprint Terraturn PWT55G Power Weeder : 96

97 :

SUN DF-151 DI Power Tiller (Tilling Type) :

97

98 : SUN GN-151 DI Power Tiller : 98

Page 10: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 1 of 98

Make & Model of machine : Kranti DI 1515 DF Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-34/393, April, 2013

Applicant‟s Address : M/s. Indtec Elektro Control,F-6 Focal Point, Phaghwara Road,Hoshiarpur, Punjab – 146 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Compression Ignition Engine

-Make : Changchai, China

-Model : HZS 1100 N

-Max. power, (kW) : 10.1 @ 2000 rpm

2. -Max. power of rotary, (kW) : 8.2 @ 2001 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.4 @ 2100 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 3.9 @ 2085 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2910 (L) x 980 (W) x 1350 (H)

6. Minimum ground clearance, (mm) : 190

7. Operational Mass with rotary tiller, (kg) : 450

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Medium Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 9.2 to 9.4 11.7 to 12.1

3. Av. Puddling index, (%) : -- 80 to 85

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.41 to 2.50 1.53 to 1.55

6. Av. wheel slip/travel reduction, (%) : -4.3 to -6.4 4.9 to 8.1

7. Av. depth of cut/depth of puddle, (cm) : 8.0 to 8.1 18.1 to 18.4

8. Av. working width, (cm) : 62.8 to 63.4 --

9. Av. Area covered, (ha/h) : 0.145 to 0.147 --

10. Av. Fuel consumption - l/h : 1.40 to 1.55 1.30 to 1.40

- l/ha : 9.52 to 10.70 --

Page 11: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 2 of 98

Make & Model of machine : Kranti DI 1515 GN Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-35/394, April, 2013

Applicant‟s Address : M/s. Indtec Elektro Control,F-6 Focal Point, Phaghwara Road,Hoshiarpur, Punjab – 146 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Compression Ignition Engine

-Make : Shifeng

-Model : ZS 1100 N

-Max. power, (kW) : 9.4 @ 2000 rpm

2. -Max. power of rotary, (kW) : 8.6 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.3 @ 2065 rpm at L-1 gear

- Maximum drawbar power, (kW.) : 3.7 @ 2087 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2920 (L) x 980 (W) x 1360 (H)

6. Minimum ground clearance, (mm) : 210

7. Operational Mass with rotary tiller, (kg) : 502

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Medium Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 9.2 to 9.3 11.6 to 12.1

3. Av. Puddling index, (%) : -- 78 to 82

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.47 to 2.57 1.51 to 1.52

6. Av. wheel slip/travel reduction, (%) : -2.2 to -3.9 4.9 to 8.6

7. Av. depth of cut/depth of puddle, (cm) : 8.0 to 8.2 18.8 to 19.4

8. Av. working width, (cm) : 62.0 to 65.0 --

9. Av. Area covered, (ha/h) : 0.143 to 0.153 --

10. Av. Fuel consumption - l/h : 1.28 to 1.37 1.20 to 1.30

- l/ha : 8.37 to 9.58 --

Page 12: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 3 of 98

Make & Model of machine : Sharchi Shaktiman Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-36/395, April, 2013

Applicant‟s Address : M/s Bengal Tools Ltd. [Agro Div],2, Jessore Road, Kolkata – 700 028, West Bengal

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Vertical, Single Cylinder, Compression Ignition Engine

-Make : Delux

-Model : DLH 1105

-Max. power, (kW) : 12.1 @ 2250 rpm

2. -Max. power of rotary, (kW) : 10.9 @ 2247 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.1 @ 2304 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 3.7 @ 2311 rpm at L-3 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2730 (L) x 940 (W) x 1360 (H)

6. Minimum ground clearance, (mm) : 240

7. Operational Mass with rotary tiller, (kg) : 534

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Medium Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 9.2 to 9.4 11.1 to 11.4

3. Av. Puddling index, (%) : -- 84 to 87

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.80 1.65 to 1.67

6. Av. wheel slip/travel reduction, (%) : -5.0 to -5.7 1.5 to 1.9

7. Av. depth of cut/depth of puddle, (cm) : 8.2 to 8.4 17.9 to 18.3

8. Av. working width, (cm) : 69.0 to 69.4 --

9. Av. Area covered, (ha/h) : 0.171 to 0.175 --

10. Av. Fuel consumption - l/h : 1.28 to 1.32 1.43 to 1.45

- l/ha : 7.31 to 7.61 --

Page 13: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 4 of 98

Make & Model of machine : Souza RT 125 DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-37/396, April, 2013

Applicant‟s Address : M/s. Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Towers, 3rd Floor, Above Food World, Puttenehalli Road, Yelahanka, Bangalore – 560 064

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Compression Ignition Engine

-Make : Siam Kubota Corporation Co. Ltd., Thailand

-Model : RT125 Plus+

-Max. power, (kW) : 9.6 @ 2440 rpm

2. -Max. power of rotary, (kW) : 8.0 @ 2441 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 2.9 @ 2490 rpm at L-1 gear

- Maximum drawbar power, (kW.) : 3.7 @ 2461 rpm at L-3 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2915 (L) x 970 (W) x 1255 (H)

6. Minimum ground clearance, (mm) : 200

7. Operational Mass with rotary tiller, (kg) : 462

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Medium Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 9.0 to 9.3 10.1 to 10.7

3. Av. Puddling index, (%) : -- 80 to 84

4. Gear used : L-1 L-1

5. Av. speed of operation, (kmph) : 1.85 to 1.86 1.52 to 1.60

6. Av. wheel slip/travel reduction, (%) : -1.4 to -2.8 -0.11 to 1.70

7. Av. depth of cut/depth of puddle, (cm) : 8.2 to 8.5 19.0 to 20.0

8. Av. working width, (cm) : 64.6 to 65.4 --

9. Av. Area covered, (ha/h) : 0.102 to 0.104 --

10. Av. Fuel consumption - l/h : 1.33 to 1.40 1.20 to 1.30

- l/ha : 12.79 to 13.72 --

Page 14: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 5 of 98

Make & Model of machine : Otake MJ-3 6LS 2 Row Paddy Weeder (Commercial)

Test Report No. and Year of release : Machine-34/397, April, 2013

Applicant's Address : M/s. Varushapriya Agro Tech (P) Ltd., #195, 7th Cross, Ist Stage, Indiranagar, Bangalore,Karnataka – 560 038.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, 2-stroke, single cylinder, Spark Ignition engine

- Make : Rabbit

- Model : EC04EA-2

- Power, (kW) (apa) : 1.47 kW @ 7000 rpm

2. Power Transmission system : Centrifugal clutch → Worm gear (Reduction ratio 1/35)

3. Rotor unit :

- No. of rotor : 02

- No. of tynes in a row : 05

- No. of rows : 06

4.1 -No. of crop divider : 4

4.2 - No. of splash guard : 01

5. Starting method : Manual, Recoil starting system

6. Depth control Mechanism : Tail skid is provided

7. Overall Dimensions (mm) : 1330 (L) x 545 (W) x 915 (H)

8. Operational Mass, (kg) : 16

Field performance:

Sl. No. Parameters Observation

1. Speed of operation, (km/h) : 2.52 to 2.62

2. Type of weeds : Sunterla

3. Width of cut, (cm) : 35.5 to 35.8

4. Area covered, (ha/h) : 0.055 to 0.058

5. Time required, (h/ha) : 17.24 to 18.18

6. Field efficiency, (%) : 60 to 63

7. Weeding efficiency, (%) : 61 to 69

8. Row to row spacing of crop, (cm) : 30

9. Fuel consumption - l/h : 0.53 to 0.58

- l/ha : 9.26 to 10.54

10. Recommended crop : Paddy

Page 15: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 6 of 98

Make & Model of machine : SHB DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-38/398, May, 2013

Applicant‟s Address : M/s. Sukhlall Hanumanmall Baid,159, Nripendra Narayan Road,Po. & Ps. : Coochbehar, Distt.: Coochbehar, West Bengal - 736 101.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changfa

-Model : ZS1110GN

-Max. power, (kW) : 12.9 @ 2190 rpm

2. -Max. power of rotary, (kW) : 10.3 @ 2192 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.5 @ 2244 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 4.4 @ 2241 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2935 (L) x 995 (W) x 1500 (H)

6. Minimum ground clearance, (mm) : 200

7. Operational Mass with rotary tiller, (kg) : 534

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Medium Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 9.1 to 9.3 12.0 to 12.2

3. Av. Puddling index, (%) : -- 85 to 88

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.74 to 2.77 1.69 to 1.70

6. Av. wheel slip/travel reduction, (%) : -1.7 to -3.5 1.3 to 2.1

7. Av. depth of cut/depth of puddle, (cm) : 6.5 to 8.0 18.1 to 18.6

8. Av. working width, (cm) : 60.6 to 61.0 --

9. Av. Area covered, (ha/h) : 0.125 to 0.164 --

10. Av. Fuel consumption - l/h : 1.37 to 1.40 1.28 to 1.30

- l/ha : 8.42 to 10.96 --

Page 16: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 7 of 98

Make & Model of machine : Souza SZ-450 Mini Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-39/399, May, 2013

Applicant‟s Address : M/s. Souza Sifang Agro. Engg. Pvt. Ltd.,402, Kailash Towers, 3rd Floor, Above Food World, Puttenehalli Road, Yelahanka, Bangalore – 560 064

Technical Specification:

This machine, named SOUZA SZ – 450 MINI POWER TILLER (TILLING TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO”.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Horizontal, Water Cooled, IDI, Compression Ignition Engine

-Make : Cameo

-Model : Cameo Plus+

-Max. power, (kW) : 7.3 @ 2385 rpm

2. -Max. power of rotary, (kW) : 6.1 @ 2391 rpm

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2080 (L) x 850 (W) x 1150 (H)

6. Minimum ground clearance, (mm) : 190

7. Operational Mass with rotary tiller, (kg) : 340

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Medium

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 2.0 to 2.6 10.7 to 11.1

3. Av. Puddling index, (%) : -- 84 to 86

4. Gear used : L-1 L-1

5. Av. speed of operation, (kmph) : 1.80 to 1.85 1.75 to 1.76

6. Av. wheel slip/travel reduction, (%) : -3.96 to -4.13 5.90 to 6.01

7. Av. depth of cut/depth of puddle, (cm) : 5.9 to 6.7 18.3

8. Av. working width, (cm) : 41.8 to 42.0 --

9. Av. Area covered, (ha/h) : 0.048 to 0.049 --

10. Av. Fuel consumption - l/h : 0.93 to 0.97 0.83 to 0.85

- l/ha : 19.13 to 20.00 --

Page 17: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 8 of 98

Make & Model of machine : Shrachi 105 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-35/400, May, 2013

Applicant‟s Address : M/s Bengal Tools Ltd. (Agro Div), 2, Jessore Road, Dum Dum, Kolkata – 700 028, West Bengal.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Forced air cooled, 4 stroke, Compression ignition engine

- Make : SHRACHI

- Power, (kW) (apa) : 3.5

2. Transmission system

2.1 Type of clutch : Friction, Wet type

2.2 Gear

2.2.1 Type of drive from crank shaft to intermediary shaft

: Gear, with 2.79 : 1 reduction ratio

2.2.2 Type of drive from intermediary shaft to rotary tiller shaft

: Gear drive, with 4.56:1 reduction ratio

3. No. of rotor blades : 32

4. Starting method : Manual, Recoil starting system

5. Overall Dimensions, (mm) : 1850 (L) x 975 (W) x 1070 (H)

6. Operational Mass, (kg) : 118

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.20 to 1.35

2. Av. Depth of cut, (cm) : 2 to 3

3. Av. Width of cut, (cm) : 100 to 103

4. Av. Area covered, (ha/h) : 0.069 to 0.080

5. Av. Time required for 1 ha, (h) : 12.50 to 14.49

6. Av. Field efficiency, (%) : 57.5 to 62.4

7. Av. Weeding efficiency, (%) : 51 to 57

8. Av. Fuel consumption - l/h : 0.72 to 0.75

- l/ha : 9.13 to 10.87

Page 18: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 9 of 98

Make & Model of machine : Souza 1Z-20 Rotary Weeder 800 (Commercial)

Test Report No. and Year of release : Machine-36/401, May, 2013

Applicant‟s Address : Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Tower, 3rd Floor, Above food world, Puttenehalli Road, Yelahanka, Bangalore - 560 064

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, Over head valve, 4-stroke, single cylinder, Horizontal shaft, Compression Ignition engine

- Make : Zhejiang Sifang Group Corp., China

- Power, (kW) (apa) : 3.41 @ 2600 rpm

2. Transmission system

2.1 Type of clutch : Friction, Dry plate type

2.2 Gear

2.2.1 Type of drive from crankshaft to intermediary shaft

: V-belt and pulley, with 1.93 : 1 reduction ratio

2.2.2 Type of drive from intermediary shaft to rotary tiller shaft

: Gear drive, with 4.375:1 reduction ratio

3. No. of rotor blades : 18

4. Starting method : Manual, Hand cranking system

5. Overall Dimensions, (mm) : 1650 (L) x 820 (W) x 930 (H)

6. Operational Mass, (kg) : 174

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.88 to 1.90

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 79 to 80

4. Av. Area covered, (ha/h) : 0.088 to 0.098

5. Av. Time required for 1 ha, (h) : 10.2 to 11.4

6. Av. Field efficiency, (%) : 58.3 to 65.3

7. Av. Weeding efficiency, (%) : 51 to 59

8. Av. Fuel consumption - l/h : 0.70 to 0.76

- l/ha : 7.36 to 8.07

Page 19: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 10 of 98

Make & Model of machine : Kamco KMB 200 Power Tiller (Batch Test)

Test Report No. and Year of release : PT-41/403, June, 2013

Applicant‟s Address : M/s. Kerala Agro Machinery Corporation Ltd.,

Athani - 683 585, Ernakulam District, Kerala.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single Cylinder, Horizontal, Water Cooled, Indirect Injection, Compression Ignition Engine

-Make : KAMCO

-Model : ER 90

-Max. Power, (kW) : 6.7 @ 2000 rpm

-Rated Power, (kW) : 6.7 @ 2000 rpm

2. -Max. power of rotary shaft, (kW) : 5.7 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 4.1 @ 2050 rpm at L-2 gear

- Maximum drawbar power, (kW) : 4.9 @ 2032 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, multi disc

- Make : KAMCO

3.2 Chain case

- Drive type : Roller

3.3 Gear box

- Type : Sliding mesh

- Make : KAMCO

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1 : 0.80 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2440 (L) x 910 (W) x 1205 (H)

7. Minimum ground clearance, (mm) : 187

8. Operational Mass with rotary tiller, (kg) : 484

Page 20: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 11 of 98

Make & Model of machine : Pace 14 DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-42/404, June, 2013

Applicant‟s Address : M/s Pace Agro Pvt. Ltd., 401, 4th floor, Rattan Esquire, 14/143, Chunni Ganj, Kanpur (U.P) - 208 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Compression Ignition Engine

-Make : The Siam Kubota

-Model : RT 140DI-EM

-Max. power, (kW) : 9.0 @ 2400 rpm

2. -Max. power of rotary, (kW) : 7.3 @ 2400 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.0 @ 2480 rpm at L-1 gear

- Maximum drawbar power, (kW.) : 4.4 @ 2477 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2370 (L) x 880 (W) x 1340 (H)

6. Minimum ground clearance, (mm) : 185

7. Operational Mass with rotary tiller, (kg) : 422

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.8 to 5.2 10.2 to 10.3

3. Av. Puddling index, (%) : -- 82 to 85

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.72 to 2.73 1.98 to 1.99

6. Av. wheel slip/travel reduction, (%) : -1.88 to -2.69 6.4 to 8.2

7. Av. depth of cut/depth of puddle, (cm) : 7.8 to 8.3 19.4 to 20.9

8. Av. working width, (cm) : 60.0 to 62.0 --

9. Av. Area covered, (ha/h) : 0.148 to 0.155 --

10. Av. Fuel consumption - l/h : 1.42 to 1.48 1.29 to 1.33

- l/ha : 9.16 to 10.00 --

Page 21: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 12 of 98

Make & Model of machine : Kalinga Shakthi KS - 125 DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-43/405, June, 2013

Applicant‟s Address : M/s. Samson Agri Power Equipments (P) Ltd., 132, Laxmisagar Chhak, Cuttack Road, Bhubaneswar, Odisha.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, DI, Compression Ignition Engine

-Make : VIKYNO

-Model : RV 125 - 2

-Max. power, (kW) : 8.9 @ 2400 rpm

2. -Max. power of rotary, (kW) : 7.5 @ 2399 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 2.6 @ 2450 rpm at H-1 gear

- Maximum drawbar power, (kW.) : 4.0 @ 2450 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2410 (L) x 830 (W) x 1295 (H)

6. Minimum ground clearance, (mm) : 200

7. Operational Mass with rotary tiller, (kg)

: 396

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.5 to 5.4 10.0 to 10.1

3. Av. Puddling index, (%) : -- 81 to 86

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.85 to 2.87 1.97 to 1.99

6. Av. wheel slip/travel reduction, (%) : -1.67 to -1.94 1.2 to 2.9

7. Av. depth of cut/depth of puddle, (cm) : 8.5 to 9.2 20.3 to 22.0

8. Av. working width, (cm) : 64.0 --

9. Av. Area covered, (ha/h) : 0.138 to 0.157 --

10. Av. Fuel consumption - l/h : 1.15 to 1.17 1.29 to 1.36

- l/ha : 7.39 to 8.48 --

Page 22: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 13 of 98

Make & Model of machine : KAWASHIMA 650 N POWER WEEDER (Commercial)

Test Report No. and Year of release : Machine-37/406, June, 2013

Applicant‟s Address : M/s Swarna Agri –Tech Consultants Engineers, Plot No.96, Kamalapuri colony ph I D.No. 8-3-833/96, Srinagar colony extention Hyderabad (A.P) - 500073

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, 4 stroke, Spark ignition engine

- Make : MITSUBISHI

- Power, (kW) (apa) : 3.3 kW @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Belt Tension type

2.2 Gear

2.2.1 Type of drive from crankshaft to intermediary shaft

: V- belt and pulley, with 1 : 1.59 reduction ratio

2.2.2 Type of drive from intermediary shaft to rotary tiller shaft

: Gear drive, with 12:1 reduction ratio

3. No. of rotor blades : 24

4. Drive wheel (s)

4.1 Material : Pneumatic, traction

4.2 Numbers : two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1450 (L) x 680 (W) x 970 (H)

7. Operational Mass, (kg) : 78

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.13 to 2.25

2. Av. Depth of cut, (cm) : 2.6 to 3.2

3. Av. Width of cut, (cm) : 51.6 to 52.6

4. Av. Area covered, (ha/h) : 0.076 to 0.082

5. Av. Time required for 1 ha, (h) : 12.1 to 13.2

6. Av. Field efficiency, (%) : 69 to 71

7. Av. Weeding efficiency, (%) : 58 to 61

8. Av. Fuel consumption - l/h : 0.47 to 0.52

- l/ha : 5.67 to 6.79

Page 23: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 14 of 98

Make & Model of machine : Kalinga Shakthi KS-120 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-44/407, July, 2013

Applicant‟s Address : M/s. Samson Agri Power Equipments (P) Ltd., 132, Laxmisagar Chhak, Cuttack Road, Bhubaneswar, Odisha.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, DI, Compression Ignition Engine

-Make : VIKYNO

-Model : RV 125 - 2

-Max. power, (kW) : 8.3 @ 2400 rpm

2. -Max. power of rotary, (kW) : 6.7 @ 2401 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 2.5 @ 2470 rpm at L-3 gear

- Maximum drawbar power, (kW.) : 2.9 @ 2470 rpm at L-3 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2440 (L) x 845 (W) x 1185 (H)

6. Minimum ground clearance, (mm) : 200 (at rear axle)

7. Operational Mass with rotary tiller, (kg)

: 368

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.4 to 5.7 10.2 to 10.3

3. Av. Puddling index, (%) : -- 83 to 87

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.93 2.17 to 2.20

6. Av. wheel slip/travel reduction, (%) : -1.06 to -2.19 2.4 to 3.2

7. Av. depth of cut/depth of puddle, (cm) : 8.9 to 9.2 19.4 to 20.0

8. Av. working width, (cm) : 63.4 to 63.8 --

9. Av. Area covered, (ha/h) : 0.172 to 0.175 --

10. Av. Fuel consumption - l/h : 1.13 to 1.17 1.25 to 1.30

- l/ha : 6.45 to 6.68 --

Page 24: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 15 of 98

Make & Model of machine : Kalinga Shakthi KS-145 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-45/408, July, 2013

Applicant‟s Address : M/s. Samson Agri Power Equipments (P) Ltd., 132, Laxmisagar Chhak, Cuttack Road, Bhubaneswar, Odisha.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Water cooled, Horizontal, Single Cylinder, DI, Compression Ignition Engine

-Make : VIKYNO

-Model : RV 145 - 2

-Max. power, (kW) : 9.6 @ 2350 rpm

2. -Max. power of rotary, (kW) : 7.7 @ 2349 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 2.9 @ 2459 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 2.9 @ 2432 rpm at L-3 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2400 (L) x 880 (W) x 1190 (H)

6. Minimum ground clearance, (mm) : 200 (at rear axle)

7. Operational Mass with rotary tiller, (kg)

: 398

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.2 to 5.4 10.0 to 10.4

3. Av. Puddling index, (%) : -- 83 to 88

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.67 to 2.68 1.30 to 1.37

6. Av. wheel slip/travel reduction, (%) : -1.89 to -2.25 1.1 to 1.7

7. Av. depth of cut/depth of puddle, (cm) : 10.2 to 10.7 19.9 to 20.3

8. Av. working width, (cm) : 67.0 to 67.4 --

9. Av. Area covered, (ha/h) : 0.159 to 0.171 --

10. Av. Fuel consumption - l/h : 1.20 to 1.23 1.30 to 1.37

- l/ha : 7.20 to 7.65 --

Page 25: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 16 of 98

Make & Model of machine : Changzhou GN-151 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-46/409, July, 2013

Applicant‟s Address : Associated Agro Machineries, 3/379, Thekkekara Building, Karimba (P.O), Mannarkkad, Palakkad, Kerala - 678 597.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changzhou

-Model : ZS 1105 GN

-Max. power, (kW) : 10.9 @ 1900 rpm

2. -Max. power of rotary, (kW) : 9.5 @ 1900 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.6 @ 2018 rpm at L-1 gear

- Maximum drawbar power, (kW.) : 4.3 @ 2005 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2780 (L) x 990 (W) x 1240 (H)

6. Minimum ground clearance, (mm) : 200 (At rear axle drain plug)

7. Operational Mass with rotary tiller, (kg)

: 494

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.2 to 4.3 10.0 to 10.3

3. Av. Puddling index, (%) : -- 79 to 84

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.55 to 2.56 1.65 to 1.67

6. Av. wheel slip/travel reduction, (%) : -1.5 to -2.66 1.1 to 2.39

7. Av. depth of cut/depth of puddle, (cm) : 8.1 to 8.4 20.4 to 21.2

8. Av. working width, (cm) : 58.2 to 60.0 --

9. Av. Area covered, (ha/h) : 0.138 to 0.147 --

10. Av. Fuel consumption - l/h : 1.20 to 1.27 1.45 to 1.49

- l/ha : 8.30 to 8.94 --

Page 26: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 17 of 98

Make & Model of machine : Bharath Heavy Duty Two Bottom Fixed Mould Board Plough (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-283/410, July, 2013

Applicant‟s Address : M/s. Bharath Foundry & Engg. Works, D-2 Shed, Industrial Estate, T B dam road, Hospet - 583 203,

Karnataka.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 35

2. Size of plough, (mm) : 2 x 280

3. Type of share : Bar point

4. Type of mould board : General purpose

5. No. of Bottom : Two

5.1 Dia. of upper hitch pin hole, (mm) : 26.50

5.2 Dia. of lower hitch pin, (mm) : 27.9

5.3 Width between inner faces of yoke, (mm)

: 57.7

5.4 Width between outer faces of yoke, (mm)

: 84.1

5.5 Mast height, (mm) : 485

5.6 Lower hitch point span, (mm) : 745

6. No. of land side : Two

7. Overall Dimensions, (mm) : 1450 (L) x 1150 (W) x 1080 (H)

8. Operational Mass, (kg) : 212

Field performance:

Sl. No. Parameters Observation

1. Tractor used : Swaraj 735 FE

2. Gear used : L-2

3. Average soil moisture, (%) : 3.5 to 4.1

4. Average Engine speed (rpm):

- No load : 1996 to 2001

- On load : 1910 to 1915

5. Average speed of operation, (km/h) : 3.10 to 3.20

6. Average wheel slippage, (%) : 12.6 to 13.1

7. Average depth of cut, (cm) : 20 to 21

8. Average working width, (cm) : 56.0 to 56.4

9. Area covered, (ha/h) : 0.139 to 0.146

10. Average Time required to cover one hectare, (h) : 6.85 to 7.19

11. Average Field efficiency, (%) : 79.4 to 81.8

12. Average Fuel consumption :

-l/h : 2.60 to 2.70

-l/ha : 18.40 to 18.70

13. Average Implement draft, (kgf) : 710 to 720

Page 27: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 18 of 98

Make & Model of machine : Briggs 3PT 1000D Light Weight Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-47/411, August, 2013

Applicant‟s Address : M/s. Briggs & Stratton India Private Limited, 37/1C, Palladam Road, Pappampatti, Coimbatore, Tamil Nadu - 641 016.

Technical Specification:

1. The machine, named BRIGGS 3PT 1000D LIGHT WEIGHT POWER TILLER (TILLING TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO”, that too, only in broad day-light with sufficient visibility.

2. To deter users from misusing of machine, manufacturer has not provided even a head light.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, 4 Stroke, Vertical, Compression Ignition Engine

-Make : KIPOR

-Model : KM 186 F

-Max. power, (kW) : 5.6 @ 3600 rpm

2. -Max. power of rotary, (kW) : 4.9 @ 3599 rpm

3. Starting method : Manual, Recoiling

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 1820 (L) x 630 (W) x 1150 (H)

6. Minimum ground clearance, (mm) : 130 (At portal housing)

7. Operational Mass with rotary tiller, (kg) : 284

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 2.5 to 3.3 11.5 to 11.8

3. Av. Puddling index, (%) : -- 75.5 to 79.5

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 1.57 to 1.58 1.43 to 1.55

6. Av. wheel slip/travel reduction, (%) : -3.98 to -5.51 6.98 to 7.14

7. Av. depth of cut/depth of puddle, (cm) : 2.3 to 2.5 17.9 to 18.2

8. Av. working width, (cm) : 45.9 to 46.7 --

9. Av. Area covered, (ha/h) : 0.046 to 0.050 --

10. Av. Fuel consumption - l/h : 0.60 to 0.62 0.98 to 1.00

- l/ha : 12.20 to 12.99 --

Page 28: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 19 of 98

Make & Model of machine : Mitsubishi Shakti CT 85 Power Tiller [With VWH

Engine] (Batch Test)

Test Report No. and Year of release : PT-48/412, August, 2013

Applicant‟s Address : M/s. VST Tillers Tractors Ltd., P.B. No. 4801, Mahadevapura Post, Whitefield Road, Bangalore - 48.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : MITSUBISHI SHAKTI -Model : VWH120 -Max. Power, (kW) : 6.3 @ 2200 rpm

-Rated Power, (kW) : 6.3 @ 2200 rpm

2. -Max. power of rotary shaft, (kW) : 5.1 @ 2199 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.1 @ 2315 rpm at L-2 gear

- Maximum drawbar power, (kW) : 3.89 @ 2289 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, friction, multi plate

- Make : Mitsubishi Shakti, CT-85

3.2 Chain case

- Drive type : Single Roller

3.3 Gear box

- Type : Sliding mesh

- Make : Mitsubishi Shakti

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2410 (L) x 850 (W) x 1260 (H)

7. Minimum ground clearance, (mm) : 185 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 412

Page 29: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 20 of 98

Make & Model of machine : VST Shakti 130 DI Power Tiller (Batch Test)

Test Report No. and Year of release : PT-49/413, August, 2013

Applicant‟s Address : M/s. VST Tillers Tractors Ltd., P.B. No. 4801,

Mahadevapura Post, Whitefield Road, Bangalore - 48.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder,

Compression Ignition Engine

-Make : VST SHAKTI -Model : VST 130DI -Max. Power, (kW) : 8.9 @ 2480 rpm

-Rated Power, (kW) : 8.7 @ 2400 rpm

2. -Max. power of rotary shaft, (kW) : 7.5 @ 2477 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.1 @ 2565 rpm at L-3 gear

- Maximum drawbar power, (kW) : 3.8 @ 2505 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, friction, multi plate

- Make : VST Shakti

3.2 Chain case

- Drive type : Single Roller

3.3 Gear box

- Type : Combination of constant and Sliding mesh spur gear

- Make : VST Shakti

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2370 (L) x 880 (W) x 1260 (H)

7. Minimum ground clearance, (mm) : 185 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 402

Page 30: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 21 of 98

Make & Model of machine : Kawashima 850S Power Weeder (Commercial)

Test Report No. and Year of release : Machine-38/414, August, 2013

Applicant‟s Address : M/s Swarna Agri –Tech Consultants Engineers, Plot No.96, Kamalapuri colony Phase – I, D.No. 8-3-833/96, Srinagar colony extension, Hyderabad (A.P) - 500073

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type (apa) : Four Stroke, Air cooled, Single cylinder, Spark Ignition (L-Type engine).

- Make : Mitsubishi

- Power, (kW) : 3.6 @ 1600 rpm

2. Transmission system

2.1 Type of clutch : Belt tension type

2.2 Gear

2.2.1 Type of drive from Crankshaft to intermediary shaft

: V- belt and pulley, with 2.80 : 1 reduction ratio

2.2.2 Method of drive of primary chain case : Chain and sprocket, with 1.08:1 reduction ratio

3. No. of rotor blades : 16

4. Drive wheel (s)

4.1 Material : Pneumatic, traction

4.2 Numbers : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1400 (L) x 670 (W) x 1220 (H)

7. Operational Mass, (kg) : 112

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.98 to 2.10

2. Av. Depth of cut, (cm) : 4

3. Av. Width of cut, (cm) : 55 to 56

4. Av. Area covered, (ha/h) : 0.080 to 0.090

5. Av. Time required for 1 ha, (h) : 11.17 to 12.58

6. Av. Field efficiency, (%) : 72 to 79

7. Av. Weeding efficiency, (%) : 63 to 66

8. Av. Fuel consumption - l/h : 0.92 to 1.05

- l/ha : 10.61 to 12.02

Page 31: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 22 of 98

Make & Model of machine : Kawashima KT 400 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-39/415, August, 2013

Applicant‟s Address : M/s Swarna Agri –Tech Consultants Engineers, Plot No.96, Kamalapuri colony Phase – I, D.No. 8-3-833/96, Srinagar colony extension, Hyderabad (A.P) - 500073

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Two Stroke, Air cooled, Single cylinder, Spark Ignition.

- Make : MITSUBISHI

- Power, (kW) (apa) : 1.25

2. Transmission system

2.1 Type of clutch : Centrifugal clutch (Internal expanding with friction lining)

2.2 Type of drive between crank shaft to intermediary

: Centrifugal clutch with gear drive with 1.65:1 reduction ratio

2.3 Type of drive between intermediary shaft to rotary shaft

: Worm and Wheel Gear, with 6.43 : 1 reduction ratio

3. No. of rotor blades : 16

4. Starting method : Manual, Recoil starting system

5. Overall Dimensions, (mm) : 940 (L) x 460 (W) x 1020 (H)

6. Operational Mass, (kg) : 20

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.47 to 1.50

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 33 to 34

4. Av. Area covered, (ha/h) : 0.035 to 0.037

5. Av. Time required for 1 ha, (h) : 27.25 to 28.99

6. Av. Field efficiency, (%) : 69 to 72

7. Av. Weeding efficiency, (%) : 52 to 56

8. Av. Fuel consumption - l/h : 0.72 to 0.74

- l/ha : 19.62 to 21.39

Page 32: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 23 of 98

Make & Model of machine : JAY JD - 224 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-40/416, September, 2013

Applicant‟s Address : JAY INDUSTRIES, B-54, MIDC Gokul Shirgaon, Kolhapur - 416 234, (Maharashtra).

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Forced air cooled, 4 stroke, Compression ignition engine

- Make : Usha International Ltd.

- Power, (kW) (apa) : 3.4 kW @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Cone type clutch

2.2 Gear

2.2.1 Type of drive from Crankshaft to Intermediary shaft

: V- belt and pulley, with 1 : 2.73 reduction ratio

2.2.2 Type of drive from intermediary shaft to rotary tiller shaft

: Gear drive, with 1:1.077 reduction ratio

3. No. of rotor blades : 24

4. Drive wheel (s)

4.1 - Material of wheel : Pneumatic, Traction

4.2 - Number (s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1720 (L) x 610 (W) x 1190 (H)

7. Operational Mass, (kg) : 172

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.88 to 2.94

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 45 to 47

4. Av. Area covered, (ha/h) : 0.080 to 0.091

5. Av. Time required for 1 ha, (h) : 11.05 to 12.53

6. Av. Field efficiency, (%) : 60 to 67

7. Av. Weeding efficiency, (%) : 96 to 100

8. Av. Fuel consumption - l/h : 0.90 to 0.94

- l/ha : 10.34 to 11.77

Page 33: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 24 of 98

Make & Model of machine : Rhino Super RH 12 DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-50/417, September, 2013

Applicant‟s Address : M/s. Assam Saii Motors Pvt. Ltd., 1/A, Nanda Mallick Lane, Kolkata - 700 006, West Bengal.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : RHINO

-Model : RH 140DI

-Max. power, (kW) : 10.1 @ 2400 rpm

2. -Max. power of rotary, (kW) : 8.5 @ 2400 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.2 @ 2507 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 4.0 @ 2504 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2870 (L) x 950 (W) x 1270 (H)

6. Minimum ground clearance, (mm) : 200 (At portal housing)

7. Operational Mass with rotary tiller, (kg)

: 454

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.0 to 4.3 10.8 to 11.1

3. Av. Puddling index, (%) : -- 80 to 81

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.54 to 2.56 1.58 to 1.59

6. Av. wheel slip/travel reduction, (%) : -2.62 to -3.71 -6.0 to -6.58

7. Av. depth of cut/depth of puddle, (cm) : 5.6 to 6.1 19.0

8. Av. working width, (cm) : 56.0 to 61.0 --

9. Av. Area covered, (ha/h) : 0.092 to 0.097 --

10. Av. Fuel consumption - l/h : 1.57 to 1.60 1.46 to 1.50

- l/ha : 16.29 to 17.17 --

Page 34: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 25 of 98

Make & Model of machine : Kranti IND-180 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-51/418, September, 2013

Applicant‟s Address : Indtec Elektro Control, F-6, Focal Point, Phagwara Road, Hoshiarpur, Punjab-146001

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Kranti

-Model : KT-180

-Max. power, (kW) : 9.9 @ 2200 rpm

2. -Max. power of rotary, (kW) : 8.6 @ 2200 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.1 @ 2248 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 3.1 @ 2248 rpm at L-2 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2950 (L) x 695 (W) x 1360 (H)

6. Minimum ground clearance, (mm) : 180 (At portal housing)

7. Operational Mass with rotary tiller, (kg)

: 492

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 6.8 to 7.8 10.8 to 10.9

3. Av. Puddling index, (%) : -- 80 to 82

4. Gear used : L-1 L-1

5. Av. speed of operation, (kmph) : 2.39 to 2.42 2.35 to 2.37

6. Av. wheel slip/travel reduction, (%) : -0.14 to -2.10 4.94 to 5.33

7. Av. depth of cut/depth of puddle, (cm) : 5.5 16.4 to 17.1

8. Av. working width, (cm) : 56.4 to 56.6 --

9. Av. Area covered, (ha/h) : 0.094 to 0.097 --

10. Av. Fuel consumption - l/h : 1.40 to 1.45 1.13 to 1.15

- l/ha : 14.43 to 15.43 --

Page 35: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 26 of 98

Make & Model of machine : Kranti IND-230 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-52/419, September, 2013

Applicant‟s Address : Indtec Elektro Control, F-6, Focal Point, Phagwara Road, Hoshiarpur, Punjab-146001

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Kranti

-Model : KT-180

-Max. power, (kW) : 9.9 @ 2200 rpm

2. -Max. power of rotary, (kW) : 8.2 @ 2200 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.2 @ 2280 rpm at L-3 gear

- Maximum drawbar power, (kW.) : 3.9 @ 2267 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2830 (L) x 955 (W) x 1360 (H)

6. Minimum ground clearance, (mm) : 200 (At portal housing)

7. Operational Mass with rotary tiller, (kg)

: 490

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 6.9 to 7.8 9.9 to 11.0

3. Av. Puddling index, (%) : -- 82 to 85

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.56 to 2.58 1.39 to 1.46

6. Av. wheel slip/travel reduction, (%) : -3.13 to -3.88 2.49 to 3.22

7. Av. depth of cut/depth of puddle, (cm) : 5.1 to 5.6 17.3 to 19.0

8. Av. working width, (cm) : 56.5 to 57.4 --

9. Av. Area covered, (ha/h) : 0.101 to 0.104 --

10. Av. Fuel consumption - l/h : 1.30 to 1.37 1.21 to 1.25

- l/ha : 12.74 to 13.56 --

Page 36: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 27 of 98

Make & Model of machine : Vijay XG 430 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-41/420, September, 2013

Applicant‟s Address : Vijay Engineering & Machinery Company, C, 1420, Laxmipuri, Kolhapur - 416 002, (Maharashtra).

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, 2 stroke, Spark ignition engine

- Make : VIJAY

- Power, (kW) (apa) : 1.25 kW @ 6500 rpm

2. Transmission system

2.1 Type of drive : Centrifugal clutch with gear drive with 4:1 reduction ratio

3. No. of rotor blades : 24

4. Starting method : Manual, Recoil starting system

5. Overall Dimensions, (mm) : 900 (L) x 470 (W) x 905 (H)

6. Operational Mass, (kg) : 16

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.62 to 1.85

2. Av. Depth of cut, (cm) : 2.1 to 2.3

3. Av. Width of cut, (cm) : 25 to 26

4. Av. Area covered, (ha/h) : 0.0267 to 0.0294

5. Av. Time required for 1 ha, (h) : 34.01 to 37.45

6. Av. Field efficiency, (%) : 60.6 to 64.3

7. Av. Weeding efficiency, (%) : 62 to 65

8. Av. Fuel consumption - l/h : 0.55 to 0.60

- l/ha : 20.41 to 22.10

Page 37: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 28 of 98

Make & Model of machine : Yanmar VP6D Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-42/421, October, 2013

Applicant‟s Address : Yanmar India Pvt. Ltd., K-4, Ocean height, 5th Floor, Sector 18, Noida - 201 301, U.P., India.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Three cylinder, Four stroke, Vertical, Water cooled, compression ignition engine

-Make : Yanmar

-Max. Power, (kW) : 14.8 @ 3200 rpm

2. Safety clutch

- Type : Torque limiter, claw type

- Numbers : Three (each for two rows)

3. Transmission system

- Type : Combination of Hydro Static Transmission and Hydro Mechanical Transmission

- No. of forward Speeds : 01

- No. of reverse speeds : 01

4. Planting Clutch

- Method of operation : Hand operated planting lever is provided on RHS of operator (the same lever is also used for UP/DOWN of planting board assembly)

5. Central planting gear box

-Type : Combination of sliding and constant mesh

6. Steering wheel

- Type : Power operated

7. Planting mechanism

- No. & type of planting arms : Six, Rotary

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (mm) : 120, 150, 170, 200 & 280

8. Seedling feeding mechanism

8.1 Seedling platform assembly

-Type : Inclined, sliding type with eight sections supported by five floats.

- Size, (mm) : 1280 x 285

9. Hydraulic pump

- Type : Gear

- Number of pumps : Two

10. Overall Dimensions, (mm) : 3510 (L) x 4350 (With side markers)/3600 (Without side markers) (W) x2360 (Plating board in lifted position) (H)

11. Operational Mass, (kg) : 846

Field performance: Sl. No. Parameters Observation

1. Quantity of seed required in each tray, (g) : 100 to 110

2. Number of seedling trays per ha. : 164 to 176

3. Av. Depth of transplanting, (cm) : 4

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 8 to 9

6. Av. Spacing between hills : 17

7. Av. Number of hills per sq. m. : 24

8. Av. Speed of operation, (km/h) : 4.94 to 5.16

9. Av. Area covered, (ha/h) : 0.465 to 0.567

10. Av. Time required to cover 1 ha, (h) : 1.76 to 2.15

11. Av. Total transplanting losses in 1 m2, (%) : 0.83 to 2.50

12. Av. Fuel consumption - l/h : 2.93 to 3.10

- l/ha : 5.16 to 6.67

Page 38: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 29 of 98

Make & Model of machine : Yanmar VP8DN Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-43/422, October, 2013

Applicant‟s Address : Yanmar India Pvt. Ltd., K-4, Ocean height, 5th Floor, Sector 18, Noida - 201 301, U.P., India.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Three cylinder, Four stroke, Vertical, Water cooled, compression ignition engine

-Make : Yanmar

-Max. Power, (kW) : 14.8 @ 3200 rpm

2. Safety clutch

- Type : Torque limiter, claw type

- Numbers : Four (each for two rows)

3. Transmission system

- Type : Combination of Hydro Static Transmission and Hydro Mechanical Transmission

- No. of forward Speeds : 01

- No. of reverse speeds : 01

4. Planting Clutch

- Method of operation : Hand operated planting lever is provided on RHS of operator (the

same lever is also used for UP/DOWN of planting board assembly)

5. Central planting gear box

-Type : Combination of sliding and constant mesh

6. Steering wheel

- Type : Power operated

7. Planting mechanism

- No. & type of planting arms : Eight, Rotary

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (mm) : 120, 150, 170, 200 & 280

8. Seedling feeding mechanism

8.1 Seedling platform assembly

-Type : Inclined, sliding type with eight sections supported by five floats.

- Size, (mm) : 1280 x 285

9. Hydraulic pump

- Type : Gear

- Number of pumps : Two

10. Overall Dimensions, (mm) : 3510 (L) x 4350 (With side markers)/3600 (Without side markers) (W) x2360 (Plating board in lifted position) (H)

11. Operational Mass, (kg) : 846

Field performance: Sl. No. Parameters Observation

1. Quantity of seed required in each tray, (g) : 100 to 110

2. Number of seedling trays per ha. : 178 to 186

3. Av. Depth of transplanting, (cm) : 3.5 to 4.6

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 9 to 11

6. Av. Spacing between hills : 17

7. Av. Number of hills per sq. m. : 24

8. Av. Speed of operation, (km/h) : 5.00 to 5.50

9. Av. Area covered, (ha/h) : 0.654 to 0.826

10. Av. Time required to cover 1 ha, (h) : 1.21 to 1.53

11. Av. Total transplanting losses in 1 m2, (%) : 0.83 to 1.67

12. Av. Fuel consumption - l/h : 3.53 to 3.88

- l/ha : 4.27 to 5.93

Page 39: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 30 of 98

Make & Model of machine : Pagariya 15 DI Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-53/423, October, 2013

Applicant‟s Address : Pagariya Auto Pvt. Ltd., Plot No. 3, Pagariya Tower, Adalat Road, Aurangabad - 431 001, Maharashtra.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changfa

-Model : CF 1100 N2A

-Max. power, (kW) : 10.5 @ 2000 rpm

2. -Max. power of rotary, (kW) : 9.3 @ 1999 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.2 @ 2090 rpm at L-3 gear

- Maximum drawbar power, (kW.) : 4.1 @ 2085 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2950 (L) x 1050 (W) x 1240 (H)

6. Minimum ground clearance, (mm) : 180 (At portal housing drain plug)

7. Operational Mass with rotary tiller, (kg)

: 496

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 3.9 to 4.1 11.1 to 11.5

3. Av. Puddling index, (%) : -- 80 to 85

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.65 to 2.69 1.46 to 1.48

6. Av. wheel slip/travel reduction, (%) : -1.05 to -1.82 -3.31 to -5.03

7. Av. depth of cut/depth of puddle, (cm) : 5.4 to 6.2 18.0 to 18.6

8. Av. working width, (cm) : 83.6 to 85.0 --

9. Av. Area covered, (ha/h) : 0.137 to 0.150 --

10. Av. Fuel consumption - l/h : 1.40 to 1.47 1.37 to 1.40

- l/ha : 9.34 to 10.73 --

Page 40: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 31 of 98

Make & Model of machine : Souza SZC-T 208 Power Weeder - 660 (Commercial)

Test Report No. and Year of release : Machine-44/424, October, 2013

Applicant‟s Address : Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Tower, 3rd Floor, Above food world, Puttenehalli Road, Yelahanka, Bangalore - 560 064

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Yongkang Cosmos Machinery Co. Ltd.

- Power, (kW) (apa) : 3.4 kW @ 3000 rpm

2. Transmission system

2.1 Type of clutch : Idler pulley serves the purpose of clutch

2.2 Gear

2.2.1 Type of drive from crankshaft to intermediary shaft

: V-belt and pulley, with 1 : 0.461 reduction ratio

2.2.2 Type of drive from intermediary shaft to rotary tiller shaft

: Gear drive, with 1:0.30 reduction ratio

3. No. of rotor blades : 18

4. Drive wheel (s)

4.1 Type : Pneumatic, traction

4.2 Numbers : Two

5. Starting method : Manual, Recoil starting

6. Overall Dimensions, (mm) : 1840 (L) x 705 (W) x 1400 (H)

7.. Operational Mass, (kg) : 96

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.53 to 1.56

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 55 to 56

4. Av. Area covered, (ha/h) : 0.045 to 0.049

5. Av. Time required for 1 ha, (h) : 20.41 to 22.22

6. Av. Field efficiency, (%) : 53 to 56

7. Av. Weeding efficiency, (%) : 51 to 64

8. Av. Fuel consumption - l/h : 0.58 to 0.61

- l/ha : 12.27 to 13.71

Page 41: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 32 of 98

Make & Model of machine : Shaktiman SRP 6/1000 Rotary Plough (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-284/425, October, 2013

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park,Gondal Road, NH-8B, Vavadi, Rajkot, (Gujarat),

Pin Code - 360 311.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 65 + HP Tractor

2. Rotor

-Type of rotor axle : Vertical

-No. of flanges : 07 Nos.

- Type of flange : Rectangular

2.1 Rotor blades

-Type : Knife

-No. of blades : 14

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 257

3. Type of depth control mechanism : Float

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur gear, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Bevel pinion and crown gear, with 1.77 : 1 reduction ratio

5. Overall Dimensions, (mm) : 980 (L) x 1820 (W) x 1085 (H)

6. Operational Mass, (kg) : 570

Field performance:

Sl. No. Parameters Observation

1. Gear used : L-1

2. Av. Speed of operation, (kmph) : 2.12 to 2.23

3. Av. Soil moisture (%), (cm) : 14.0 to 14.9

4. Av. Bulk density of soil, (g/cc) : 1.40 to 1.52

5. Av. Depth of cut, (cm) : 18

6. Av. Working width, (cm) : 171 to 173

7. Av. Area covered, (ha/h) : 0.245 to 0.263

8. Av. Time required for one hectare, (h) : 3.80 to 4.08

9. Av. Field efficiency, (%) : 67.4 to 70.7

10. Av. Fuel consumption

-l/h : 9.58 to 10.00

-l/ha : 36.59 to 40.80

Page 42: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 33 of 98

Make & Model of machine : Kamco Super DI Power Tiller

(First Batch Test) (Second Sample)

Test Report No. and Year of release : PT-54/426, November, 2013

Applicant‟s Address : Kerala Agro Machinery Corporation Ltd., Athani - 683 585, Ernakulam District, Kerala.

Technical Specification:

The applicant named Kamco Super DI Power Tiller had submitted a test sample, randomly selected by representative of testing authority, in accordance with IS: 4905-1968, for first batch test, in the year

2013. During Two hour Max. Power engine performance test on 03.05.2013, the max. power was observed as 7.89 kW against the declaration of 8.8 kW by the manufacturer. Upon this the firm representative requested on 04.05.2013 to allow to change the engine oil with the conviction that it would improve the performance up to the mark. The same was allowed, Test was again started but still the maximum power was observed as 7.89 kW. Firm representative was again allowed to check injector pressure, tappet clearance, etc, in compliance with his request on 08.05.2013. Engine was again put to the test on 09.05.2013, but still, maximum engine power observed as 7.89 kW. The max. Engine power under Natural ambient condition did not come to conform to the requirements of IS:13539-2008. There upon, the applicant chose to withdraw the sample from Batch test and incomplete report bearing No: PT-40/402 was released in June 2013.

Thereafter applicant again applied for submitting second sample for first batch test on 01.08.2013. Hence this test report.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single Cylinder, Water Cooled, Direct

Injection, Compression Ignition Engine

-Make : KAMCO

-Model : KAMCO DI 120

-Max. Power, (kW) : 9.1 @ 2000 rpm

-Rated Power, (kW) : 9.1 @ 2000 rpm

2. -Max. power of rotary shaft, (kW) : 6.9 @ 2001 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.7 @ 2117 rpm at L-1 gear

- Maximum drawbar power, (kW) : 4.8 @ 2075 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, Multi disc, Friction

- Make : KAMCO

3.2 Chain case

- Drive type : Single Roller

3.3 Gear box

- Type : Sliding mesh gear

- Make : KAMCO

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.25 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2500 (L) x 890 (W) x 1200 (H)

7. Minimum ground clearance, (mm) : 200 (At portal housing)

8. Operational Mass with rotary tiller, (kg) : 502

Page 43: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 34 of 98

Make & Model of machine : Shaktiman SRP 5/1000 Rotary Plough (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-285/427, November, 2013

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park,Gondal Road, NH-8B, Vavadi, Rajkot, (Gujarat),

Pin Code - 360 311.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 60 + HP Tractor

2. Rotor

-Type of rotor axle : Vertical

-No. of flanges : 06 Nos.

- Type of flange : Rectangular

2.1 Rotor blades

-Type : Knife

-No. of blades : 12

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 257

3. Type of depth control mechanism : Float

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur gear, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Bevel pinion and crown gear, with 1.77 : 1 reduction ratio

5. Overall Dimensions, (mm) : 955 (L) x 1550 (W) x 1080 (H)

6. Operational Mass, (kg) : 528

Field performance:

Sl. No. Parameters Observation

1. Gear used : A-1

2. Av. Speed of operation, (kmph) : 1.91 to 2.09

3. Av. Soil moisture (%), (cm) : 14.0 to 14.9

4. Av. Bulk density of soil, (g/cc) : 1.41 to 1.53

5. Av. Depth of cut, (cm) : 18

6. Av. Working width, (cm) : 141 to 146

7. Av. Area covered, (ha/h) : 0.188 to 0.201

8. Av. Time required for one hectare, (h) : 4.98 to 5.32

9. Av. Field efficiency, (%) : 66 to 70

10. Av. Fuel consumption

-l/h : 9.25 to 9.82

-l/ha : 46.07 to 51.87

Page 44: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 35 of 98

Make & Model of machine : Krushivator 2.00 Mtr. Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-286/428, November, 2013

Applicant‟s Address : The Maharashtra Agro-Industries Development Corporation Limited (A Government of Maharashtra

Undertaking), Agro Engineering Works, Plot No. 52, Block No. D2, M.I.D.C. Industrial Area, Chinchwad, Pune-411 019. Head Office - Rajan House, Third Floor, Near Century Bazar, Prabhadevi,Mumbai-400 025.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 55 to 65

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 09 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 48

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 208

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 04 nos of holes

- Range of depth adjustment, (mm) : 23.5 to 66.1

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel and pinion, with 1:0.52 and 1 : 0.80 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1 : 0.593 reduction ratio

5. Overall Dimensions, (mm) : 2080 (L) x 678 (W) x 1013 (H)

6. Operational Mass, (kg) : 388

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-1

2. Av. Speed of operation, (kmph) : 2.71 to 2.85 2.21 to 2.25

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 12.8 to 13.8 11

4. Av. Bulk density of soil, (g/cc) : 1.50 to 1.68 -

5. Av. Depth of cut/depth of puddle, (cm) : 10 to 11 21

6. Av. Working width, (cm) : 180 to 182 -

7. Av. Area covered, (ha/h) : 0.340 to 0.379 -

8. Av. Time required for one hectare, (h) : 2.64 to 2.94 -

9. Av. Field efficiency/puddling Index, (%) : 70 to 75 79 to 87

10. Av. Fuel consumption

-l/h : 5.15 to 5.45 5.75 to 5.87

-l/ha : 14.39 to 14.93 -

Page 45: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 36 of 98

Make & Model of machine : Indra Marshal Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-55/429, December, 2013

Applicant‟s Address : Indra Marshal Power Pvt. Ltd., 13-B, Sec.-A, Sanwer Road, Industrial Area, Indore, Madhya Pradesh - 452 015.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Indra Marshal Power Pvt. Ltd.

-Model : IML 1100

-Max. power, (kW) : 10.8 @ 2000 rpm

2. -Max. power of rotary, (kW) : 8.3 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.4 @ 2071 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 4.7 @ 2052 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2870 (L) x 975 (W) x 1260 (H)

6. Minimum ground clearance, (mm) : 190 (At portal housing drain plug)

7. Operational Mass with rotary tiller, (kg)

: 476

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.1 to 6.2 10.0

3. Av. Puddling index, (%) : -- 84.5 to 85

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.83 to 2.89 1.56 to 1.60

6. Av. wheel slip/travel reduction, (%) : -1.6 to -3.1 -1.16 to -1.26

7. Av. depth of cut/depth of puddle, (cm) : 5.0 to 5.4 16.7 to 17.4

8. Av. working width, (cm) : 56.5 to 57.0 --

9. Av. Area covered, (ha/h) : 0.101 to 0.111 --

10. Av. Fuel consumption - l/h : 1.43 to 1.62 1.33 to 1.37

- l/ha : 13.37 to 15.64 --

Page 46: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 37 of 98

Make & Model of machine : Souza KMG 31 B Brush Cutter (Commercial)

Test Report No. and Year of release : Machine-45/430, December, 2013

Applicant‟s Address : Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Tower, 3rd floor, Above food world, Puttenahalli Road, Yelahanka, Bangalore- 64, (Karnataka) - 560 064 .

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single Cylinder, 4 stroke, Air cooled, Spark Ignition Engine

- Make : KAMA

- Power, (kW) (apa) : 0.9 kW @ 7000 rpm

2. Power Transmission system

2.1 Type of drive gear : Gear drive

3. Starting method : Manual, Recoil starting system

4. Overall Dimensions (mm)

4.1 Length (with triangular blade assembly), (mm) : 1925

4.2 Length (with circular disc assembly), (mm) : 1920

4.3 Length (with nylon rope assembly), (mm) : 1900

4.4 Height without weeds deflector, (mm) : 345

4.5 Height with weeds deflector, (mm) : 370

4.6 Width, (mm) : 620

5. Mass, (kg)

5.1 With circular disc and weeds deflector : 8.50

5.2 With triangular blade and weeds deflector : 8.30

Field performance:

Sl. No. Parameters Observation

Bush cutting Weeds cutting

1. Speed of operation, (km/h) : -- 0.61 to 0.74

2. Average number of bush in 1 m2/No. of weeds in 1 m2

: 45 to 46 43 to 53

3. Average height of bush/weeds, (cm) : 88 to 128 57 to 65

4. Dia of Bush, (mm) : 13 to 16 --

5. No of bush cut in one hour : 2949 to 3317 --

6. Mass of bush cutted (kg/h) / Mass of weed cut, (kg/h)

: 201 to 255 60 to 67

7. Rate of work, (ha/h) : -- 0.018 to 0.028

8. Time required for one hectare, (h) : -- 35.7 to 55.6

9. Fuel consumption - l/h : 0.43 to 0.46 0.42 to 0.43

- l/ha : -- 15.18 to 23.28

Page 47: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 38 of 98

Make & Model of machine : Vijay CG 430 GB Brush Cutter (Commercial)

Test Report No. and Year of release : Machine-46/431, December, 2013

Applicant‟s Address : Vijay Engineering & Machinery Company, C, 1420, Laxmipuri, Kolhapur - 416 002, (Maharashtra).

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single Cylinder, 2 stroke, Spark

Ignition Engine

- Model : Vijay 430

- Power, (kW) (apa) : 1.25 kW @ 6500 rpm

2. Power Transmission system

2.1 Type of drive gear : Gear drive

3. Starting method : Manual, Recoil starting system

4. Overall Dimensions (mm)

4.1 Length (with triangular blade assembly), (mm) : 1890

4.2 Length (with circular disc assembly), (mm) : 1875

4.3 Height without weeds deflector, (mm) : 450

4.4 Height with weeds deflector, (mm) : 475

4.5 Width, (mm) : 650

5. Mass, (kg)

5.1 With circular disc and weeds deflector : 9.50

5.2 With triangular blade and weeds deflector : 9.00

Field performance:

Sl. No. Parameters Observation

Bush cutting Weeds cutting

1. Speed of operation, (km/h) : -- 0.60 to 0.69

2. Average number of bush in 1 m2/No. of weeds in 1 m2

: 37 to 41 25 to 35

3. Average height of bush/weeds, (cm) : 96 to 101 41 to 64

4. Dia of Bush, (mm) : 10 to 12 --

5. No of bush cut in one hour : 1993 to 3015 --

6. Mass of bush cutted (kg/h) / Mass of weed cut, (kg/h)

: 162 to 178 44 to 52

7. Rate of work, (ha/h) : -- 0.021 to 0.029

8. Time required for one hectare, (h) : -- 34.5 to 47.6

9. Fuel consumption - l/h : 0.77 0.75

- l/ha : -- 30.2

Page 48: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 39 of 98

Make & Model of machine : Redlands RP824 Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-47/432, January, 2014

Applicant‟s Address : Ashlyn Antony, Redlands House, Karikath Lane, M.G. Road, Thrissur, Kerala - 680 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Four stroke, Air cooled, direct injection, Vertical compression ignition engine.

-Make : Redlands

-Power, (kW) (apa) : 3.4 at 1680 rpm

2. Clutch

- Type : Friction cone clutch

3. Main Gear Box

- Type : Sliding mesh

- No. of forward Speeds : 05

- No. of reverse speeds : Nil

4. Planting Clutch

-Type : Fork positioned dog clutch

5. Planting gear box

-Type of drive from main gear box to planting gear box

: Bevel and pinion, with 1:1 reduction ratio

- No & type of gear on feed shaft : One, spur, 28 T

6. Planting arm drive

- Type : Chain and sprocket

7. Planting system

- No. & type of planting arms : Eight, Crank

- Spacing between rows, (mm) : 238

- Provision for hill spacing, (cm) : 12, 14, 16 and 19

8. Seedling box Assembly

-Type : Inclined, sliding type

- Size, (mm) : 1955 x 730 (curved) x 0.80

- No. of compartments : 08

- Size of compartment, (mm) : 730 x 220 x 38 (depth)

9. Overall Dimensions, (mm) : 2760 (L) x 2200 (W) x 1290 (H)

10. Operational Mass, (kg) : 350

Field performance:

Sl. No. Parameters Observation

1. Quantity of seed required, (kg) : 12 kg treated seed is required for 1 acre (with 2 to 3 seedling/hill)

2. Number of seedling trays consumed per ha. : 262 to 284

3. Av. Depth of transplanting, (cm) : 3 to 4

4. Av. Spacing between rows, (cm) : 24

5. Av. Number of plants per hill : 5

6. Av. Spacing between hills : 19

7. Av. Number of hills per sq. m. : 20

8. Av. Speed of operation, (km/h) : 1.83 to 1.98

9. Av. Area covered, (ha/h) : 0.179 to 0.208

10. Av. Time required to cover 1 ha, (h) : 4.81 to 5.59

11. Av. Total transplanting losses in 1 m2, (%) : 0.5 to 10.0

12. Av. Fuel consumption - l/h : 0.77 to 0.87

- l/ha : 3.69 to 4.85

Page 49: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 40 of 98

Make & Model of machine : Pragati Seed Cum Fertilizer Drill (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-287/433, January, 2014

Applicant‟s Address : Pragati Agricultural Industry, C.B. Bhoomaraddi compound, Opp: Vishwa Hotel, P.B. Road,

Gadag - 582 101, Karnataka.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 30 to 50

2. Size, (mm) : 203 x 9 (Adjustable)

3. Seed on which test trials were requested to be conducted

: Jawar and Bengal gram

4. Tyne

- No. of tynes : Nine

- Type of tyne : Curved, rigid

- Spacing of tynes : 210 to 240 (adjustable)

- Arrangement of tynes on main frame : All tynes are arranged in a single row

4.1 Furrow openers

-Type : Shoe

-No. of furrow openers : 9

5. Seed cum fertilizer box (Hopper)

-Type : Two No. of boxes are there one for seed and other for fertilizer.

- Capacity with seed/fertilizer, (kg) : 49 kg (seed) and 49 kg (fertilizer)

6. Metering mechanism

6.1 Seed metering mechanism

- Type : A plate with 10 groove to carry the grains, rotates vertically.

- Method of drive : Chain and sprocket

6.2 Fertilizer metering mechanism

-Type : A plate with 10 groove to carry the grains, rotates vertically.

- Method of drive : Chain and sprocket

7. Overall Dimensions, (mm) : 2195 (L) x 1455 (W) x 1395 (H)

8. Operational Mass with Seed and Fertilizer, (kg) : 404

Field performance: Sl. No. Parameters Observation

Jawar Bengal Gram

1. Gear used : A-2

2. Av. Speed of operation, (kmph) : 2.92 to 2.94 2.88 to 2.91

3. Av. Soil moisture (%) : 11.5 to 11.8 9.0

4. Number of seeds in 100 gram sample : 3740 433

5. Bulk density of seed, (g/cc) 0.744 0.763

6. Av. depth of seed, (cm) : 3.36 to 3.57 2.8 to 4.1

7. Av. depth of fertilizer : 4.21 to 4.36 4.25 to 4.45

8. Seed rate, (kg/ha) : 19.87 to 21.17 74.07 to 74.28

9. Fertilizer rate, (kg/ha) : 29.81 to 31.97 30.50 to 31.50

10. Av. Area covered, (ha/h) : 0.387 to 0.432 0.493 to 0.536

11. Av. Time required for one hectare, (h) : 2.31 to 2.58 1.87 to 1.97

12. Av. Field efficiency, (%) : 78 to 82 83 to 92

13. Av. Fuel consumption

-l/h : 3.43 to 3.57 3.41 to 3.60

-l/ha : 7.41 to 8.25 6.72 to 6.73

Page 50: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 41 of 98

Make & Model of machine : I Khodal Param - 5 Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-288/434, January, 2014

Applicant‟s Address : I Khodal Agri Equipments, "Bhoot Ni Vadi", Plot No:3, Near T.C.P.L., Maliyasan Post, Rajkot Taluk and

District, Gujarat - 360 003.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 35 to 50

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 07 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 36

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 234

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 05 nos of holes

- Range of depth adjustment, (mm) : 7.8 to 52.0

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.55 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1780 (L) x 760 (W) x 1010 (H)

6. Operational Mass, (kg) : 472

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : A-2

2. Av. Speed of operation, (kmph) : 2.88 to 2.92 2.78 to 2.87

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.3 to 6.0 9.6 to 10.6

4. Av. Bulk density of soil, (g/cc) : 1.40 to 1.54 -

5. Av. Depth of cut/depth of puddle, (cm) : 8 to 9 17

6. Av. Working width, (cm) : 145 to 147 -

7. Av. Area covered, (ha/h) : 0.304 to 0.330 -

8. Av. Time required for one hectare, (h) : 3.0 to 3.29 -

9. Av. Field efficiency/puddling Index, (%) : 72 to 78 70 to 74

10. Av. Fuel consumption

-l/h : 5.60 to 5.80 4.75 to 4.82

-l/ha : 17.00 to 19.00 -

Page 51: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 42 of 98

Make & Model of machine : Pragati Terracer Blade (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-289/435, January, 2014

Applicant‟s Address : Pragati Agricultural Industry, C.B. Bhoomaraddi compound, Opp: Vishwa Hotel, P.B. Road, Gadag - 582 101, Karnataka.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : Not specified

2. Working width, (mm) : 2130

3. No. of side plates : 02

4. Size of mould board, (mm) : 2130 x 470 (Curved) x 95

5. Size of cutting blade, (mm) : 2130 x 100 x 10.6

6. Overall Dimensions, (mm) : 2150 (L) x 890 (W) x 1030 (H)

7. Operational Mass, (kg) : 198

Field performance:

Sl. No.

Parameters

Observation

1. Tractor used : John Deere - 5310

2. Gear used : A-1

3. Av. Soil moisture (%) : 6.4 to 7.8

4. Avg. Speed of operation (kmph) : 2.00 to 2.13

5. Avg. mass of soil handled by soil board (kgs) for 5 meter.

: 402 to 410

6. Avg. Working width (cm) : 206 to 210

7. Avg. wheel slippage, (%) : 3.36 to 13.86

8. Area covered (ha/h) : 0.182 to 0.218

9. Time required for one hectare (h) : 4.59 to 5.49

10. Field efficiency (%) : 42 to 50

11. Fuel consumption

-l/h : 2.48 to 2.67

-l/ha : 11.38 to 13.89

12. Avg. implement draft (kgf) : 448 to 468

13. Power requirement kW : 2.5 to 2.7

Page 52: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 43 of 98

Make & Model of machine : Shaktiman SRP 2.5/540 Rotary Plough (Tractor

Mounted) (Commercial)

Test Report No. and Year of release : IMP-290/436, February, 2014

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park,Gondal Road, NH-8B, Vavadi, Rajkot, (Gujarat), Pin Code - 360 311.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : Above 35 PTO HP Tractor

2. Rotor

-Type of rotor axle : Vertical

-No. of flanges : 03 Nos.

- Type of flange : Rectangular

2.1 Rotor blades

-Type : Knife

-No. of blades : 06

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 305

3. Type of depth control mechanism : Float

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel pinion and crown gear, with 1.77 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Spur gear, with 1 : 1 reduction ratio

5. Overall Dimensions, (mm) : 970 (L) x 870 (W) x 985 (H)

6. Operational Mass, (kg) : 342

Field performance:

Sl. No. Parameters Observation

1. Gear used : L-1

2. Av. Speed of operation, (kmph) : 2.57 to 2.70

3. Av. Soil moisture (%), (cm) : 13.0 to 14.2

4. Av. Bulk density of soil, (g/cc) : 1.40 to 1.53

5. Av. Depth of cut, (cm) : 19

6. Av. Working width, (cm) : 68.6 to 69.6

7. Av. Area covered, (ha/h) : 0.108 to 0.118

8. Av. Time required for one hectare, (h) : 8.47 to 9.26

9. Av. Field efficiency, (%) : 60 to 64

10. Av. Fuel consumption

-l/h : 7.25 to 7.60

-l/ha : 61.41 to 69.45

Page 53: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 44 of 98

Make & Model of machine : Shaktiman SRP 3.25/1000 Rotary Plough (Tractor

Mounted) (Commercial)

Test Report No. and Year of release : IMP-291/437, February, 2014

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park,Gondal Road, NH-8B, Vavadi, Rajkot, (Gujarat), Pin Code - 360 311.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : Above 35 PTO HP Tractor

2. Rotor

-Type of rotor axle : Vertical

-No. of flanges : 04 Nos.

- Type of flange : Rectangular

2.1 Rotor blades

-Type : Knife

-No. of blades : 08

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 257

3. Type of depth control mechanism : Float

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur gear, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Bevel pinion and crown gear, with 1.77 : 1 reduction ratio

5. Overall Dimensions, (mm) : 980 (L) x 1080 (W) x 1070 (H)

6. Operational Mass, (kg) : 435

Field performance:

Sl. No. Parameters Observation

1. Gear used : L-1

2. Av. Speed of operation, (kmph) : 2.41 to 2.43

3. Av. Soil moisture (%), (cm) : 14.0 to 14.8

4. Av. Bulk density of soil, (g/cc) : 1.41 to 1.51

5. Av. Depth of cut, (cm) : 19 to 20

6. Av. Working width, (cm) : 96 to 97.1

7. Av. Area covered, (ha/h) : 0.149 to 0.152

8. Av. Time required for one hectare, (h) : 6.58 to 6.71

9. Av. Field efficiency, (%) : 64 to 65

10. Av. Fuel consumption

-l/h : 7.50 to 7.67

-l/ha : 49.35 to 51.16

Page 54: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 45 of 98

Make & Model of machine : Shaktiman SRP 4/1000 Rotary Plough (Tractor

Mounted) (Commercial)

Test Report No. and Year of release : IMP-292/438, February, 2014

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park,Gondal Road, NH-8B, Vavadi, Rajkot, (Gujarat), Pin Code - 360 311.

Technical Specification:

Sl. No.

Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : Above 45 PTO HP Tractor

2. Rotor

-Type of rotor axle : Vertical

-No. of flanges : 05 Nos.

- Type of flange : Rectangular

2.1 Rotor blades

-Type : Knife

-No. of blades : 10

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 257

3. Type of depth control mechanism : Float

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur gear, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Bevel pinion and crown gear, with 1.77 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1015 (L) x 1415 (W) x 1085 (H)

6. Operational Mass, (kg) : 478

Field performance:

Sl. No. Parameters Observation

1. Gear used : L-1

2. Av. Speed of operation, (kmph) : 2.35 to 2.41

3. Av. Soil moisture (%), (cm) : 14.2 to 14.8

4. Av. Bulk density of soil, (g/cc) : 1.43 to 1.52

5. Av. Depth of cut, (cm) : 18 to 19

6. Av. Working width, (cm) : 117 to 119

7. Av. Area covered, (ha/h) : 0.169 to 0.192

8. Av. Time required for one hectare, (h) : 5.21 to 5.92

9. Av. Field efficiency, (%) : 60 to 68

10. Av. Fuel consumption

-l/h : 8.25 to 8.77

-l/ha : 45.17 to 48.84

Page 55: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 46 of 98

Make & Model of machine : I Khodal Param - 6 Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-293/439, February, 2014

Applicant‟s Address : I Khodal Agri Equipments, "Bhoot Ni Vadi", Plot No:3, Near T.C.P.L., Maliyasan Post, Rajkot Taluk and

District, Gujarat - 360 003.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 50 to 70

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 08 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 42

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 234

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 05 nos of holes

- Range of depth adjustment, (mm) : 7.6 to 50.0

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.19 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.55 : 1 reduction ratio

5. Overall Dimensions, (mm) : 2080 (L) x 780 (W) x 1015 (H)

6. Operational Mass, (kg) : 520

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : A-2

2. Av. Speed of operation, (kmph) : 2.77 to 2.91 2.61 to 2.75

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.3 to 5.8 10 to 11

4. Av. Bulk density of soil, (g/cc) : 1.45 to 1.51 -

5. Av. Depth of cut/depth of puddle, (cm) : 8 to 9 16

6. Av. Working width, (cm) : 176 to 177 -

7. Av. Area covered, (ha/h) : 0.374 to 0.397 -

8. Av. Time required for one hectare, (h) : 2.52 to 2.67 -

9. Av. Field efficiency/puddling Index, (%) : 75 to 80 80 to 85

10. Av. Fuel consumption

-l/h : 5.94 to 6.15 5.10 to 5.17

-l/ha : 15.09 to 16.40 -

Page 56: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 47 of 98

Make & Model of machine : Souza SZ - 15 Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-56/440, March, 2014

Applicant‟s Address : Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Tower, 3rd Floor, Above food world, Puttenahalli Road, Yelahanka, Bangalore - 560 064.

Technical Specification:

The machine, named SOUZA SZ - 15 POWER TILLER (TILLING TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO”.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Zhejiang Shifeng

-Model : HCZS 1100 NL

-Max. power, (kW) : 10.2 @ 2000 rpm

2. -Max. power of rotary, (kW) : 7.7 @ 2000 rpm

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 3110 (L) x 1030 (W) x 1240 (H)

6. Minimum ground clearance, (mm) : 180 (At portal housing drain plug)

7. Operational Mass with rotary tiller, (kg) : 504

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.0 to 5.8 11

3. Av. Puddling index, (%) : -- 79.0 to 80.0

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.80 to 2.90 1.62 to 1.63

6. Av. wheel slip/travel reduction, (%) : -1.50 to -3.10 1.22 to 1.42

7. Av. depth of cut/depth of puddle, (cm) : 5.0 20

8. Av. working width, (cm) : 77 to 78 --

9. Av. Area covered, (ha/h) : 0.140 to 0.153 --

10. Av. Fuel consumption - l/h : 1.48 to 1.62 1.68 to 1.70

- l/ha : 10.00 to 11.10 --

Page 57: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 48 of 98

Make & Model of machine : Souza SF - 15 Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-57/441, March, 2014

Applicant‟s Address : Souza Sifang Agro. Engg. Pvt. Ltd., 402, Kailash Tower, 3rd Floor, Above food world, Puttenahalli Road, Yelahanka, Bangalore - 560 064.

Technical Specification:

The machine, named SOUZA SF – 15 POWER TILLER (TILLING TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine.

-Make : Zhejiang Sifang Group Corp., China.

-Model : ZS 1100 N

-Max. power, (kW) : 10.3 @ 2000 rpm

2. -Max. power of rotary, (kW) : 8.2 @ 2001 rpm

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2870 (L) x 960 (W) x 1260 (H)

6. Minimum ground clearance, (mm) : 210 (At portal housing drain plug)

7. Operational Mass with rotary tiller, (kg) : 476

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.8 to 6.2 10

3. Av. Puddling index, (%) : -- 78 to 79

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.78 to 2.84 1.38 to 1.45

6. Av. wheel slip/travel reduction, (%) : -0.60 to -3.70 4.02 to 4.90

7. Av. depth of cut/depth of puddle, (cm) : 5 to 6 17 to 19

8. Av. working width, (cm) : 57 to 58 --

9. Av. Area covered, (ha/h) : 0.105 to 0.110 --

10. Av. Fuel consumption - l/h : 1.40 to 1.52 1.60 to 1.66

- l/ha : 13.09 to 14.47 --

Page 58: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 49 of 98

Make & Model of machine : I Khodal Param - 4 Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-294/442, March, 2014

Applicant‟s Address : I Khodal Agri Equipments, "Bhoot Ni Vadi", Plot No:3, Near T.C.P.L., Maliyasan Post, Rajkot Taluk and

District, Gujarat - 360 003.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) : 30 to 40

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 06 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 30

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 234

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 05 nos of holes

- Range of depth adjustment, (mm) : 7.9 to 53.0

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.19 : 1 and 1.77:1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.55 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1430 (L) x 800 (W) x 1050 (H)

6. Operational Mass, (kg) : 424

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-1

2. Av. Speed of operation, (kmph) : 3.44 to 3.49 2.17 to 2.22

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.4 to 6.3 10 to 11

4. Av. Bulk density of soil, (g/cc) : 1.40 to 1.51 -----

5. Av. Depth of cut/depth of puddle, (cm) : 8 19 to 20

6. Av. Working width, (cm) : 115 to 116 ------

7. Av. Area covered, (ha/h) : 0.308 to 0.320 ------

8. Av. Time required for one hectare, (h) : 3.13 to 3.25 -----

9. Av. Field efficiency/puddling Index, (%) : 77 to 80 77 to 83

10. Av. Fuel consumption

-l/h : 4.82 to 5.10 3.86 to 4.30

-l/ha : 15.09 to 16.58 ----

Page 59: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 50 of 98

Make & Model of machine : Maijo DFAM DF-15 DIL Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-58/443, March, 2014

Applicant‟s Address : M/s. George Maijo Industries Pvt. Ltd., 2B, Apex Plaza, 5, Nungambakkam High Road, Chennai - 600 034 (Tamil Nadu).

Technical Specification:

The maximum power was observed as 9.4 kW against the required value of 11.0 kW. This is not meeting the Evaluative (mandatory) parameter applicable for Qualifying Minimum Performance Criteria as per Clause – 4.1 (Table-1) of IS: 13539: 2008 for acceptance of the power tiller for the purpose of subsidies / NABARD financing.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changchai

-Model : HZS 1100 N

-Max. power, (kW) : 9.4 @ 1999 rpm

2. -Max. power of rotary, (kW) : 8.5 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.4 @ 2071 rpm at L-3 gear

- Maximum drawbar power, (kW.) : 4.7 @ 2064 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2960 (L) x 950 (W) x 1205 (H)

6. Minimum ground clearance, (mm) : 170 (At portal housing drain plug)

7. Operational Mass with rotary tiller, (kg)

: 494

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.8 to 6.6 10.0

3. Av. Puddling index, (%) : -- 80 to 83

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.90 to 2.96 1.69 to 1.76

6. Av. wheel slip/travel reduction, (%) : - 2.23 to -3.50 2.53 to 7.06

7. Av. depth of cut/depth of puddle, (cm) : 5.0 to 6.0 19 to 21

8. Av. working width, (cm) : 57.0 to 60.0 --

9. Av. Area covered, (ha/h) : 0.115 to 0.121 --

10. Av. Fuel consumption - l/h : 1.35 to 1.43 1.90 to 2.15

- l/ha : 11.25 to 12.44 --

Page 60: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 51 of 98

Make & Model of machine : Priya Reaper (Tractor Front Mounted) (Commercial)

Test Report No. and Year of release : Machine-48/444, April, 2014

Manufacturer‟s Address : Atul Industries, Mayuranagar Havad Road, Plot No. 10/11 (K), Dharangadhra -363 310, District: Surendranagar, Gujarat.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size (hp) : 35 to 60

2. Number of star wheels : 07

3. Working width, (mm) : 2160

4. Effective cutter bar width, (mm) : 2050

5. Cutter bar stroke length, (mm) : 75

6. Guard spacing, (mm) : 80

7. Stroke per minute : 489

8. No. & Size of belt conveyor, (mm) : 4 and 4330 x 56 x 5 (t)

9. Overall Dimensions, (mm) : 2420 (L) x 840 (W) x 1110 (H)

10. Operational Mass, (kg) : 346

Field performance:

Sl. No. Parameters Observation

1. Tractor used : Mahindra & Mahindra- 575 DI

2. Av. Speed of operation, (km/h) : 2.25 to 2.32

3. Av. Width of cut, (m) : 1.89 to 1.93

4. Av. Stubble height, (mm) : 0.93 to 104

5. Av. Crop mass harvested, (kg/h) : 2750 to 3144

6. Av. Crop mass harvested, (kg/ha) : 14159 to 15079

7. Av. Grain-crop ratio : 0.287 to 0.293

8. Av. Area covered, (ha/h) : 0.192 to 0.211

9. Av. Time required for one hectare, (h) : 4.74 to 5.20

10. Av. Pre harvest loss, (%) : 0.22 to 0.29

11. Av. Post harvest loss, (%) : 0.87 to 1.22

12. Av. Fuel consumption - l/h : 2.10 to 2.25

- l/ha : 10.19 to 10.92

13. Recommended crop : Paddy

Page 61: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 52 of 98

Make & Model of machine : Ace RTT 2Z-6300B-SL-Z-E-P Self Propelled Riding Type 6 Row Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-49/445, April, 2014

Applicant‟s Address : M/s. Action Construction Equipment Ltd., (Agri Equipment Division), Jajru Road,

25th Mile Stone, Mathura Road, Ballabgarh, Faridabad – 121 004, Haryana.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Four stroke, Air cooled, direct injection, Vertical, Compression

ignition engine

-Make : Koop, China

-Power, (kW) (apa) : 3.4 @ 1700 rpm

2. Clutch

- Type : Dry, Friction cone clutch

3. Main Gear Box

- Type : Sliding mesh, spur gear

- No. of forward Speeds : 05

- No. of reverse speeds : Nil

4. Planting Clutch

-Type : Fork positioned dog clutch

5. Planting gear box

-Type of drive from main gear box to planting gear box

: Bevel and pinion, with 1:1 reduction ratio

- No & type of gear on feed shaft : One, spur, 28 T

6. Planting arm drive

- Type : Chain and sprocket

7. Planting system

- No. & type of planting arms : Six, Crank

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (cm) : 12, 14, 16 and 19

8. Seedling box Assembly

-Type : Inclined, sliding type

- Size, (mm) : 1850 x 730 (Curved) x 0.75

- No. of compartments : 06

- Size of compartment, (mm) : 730 x 283 x 38 (depth)

9. Overall Dimensions, (mm) : 2670 (L) x 2190 (W) x 1240 (H)

10. Operational Mass, (kg) : 390

Field performance:

Sl. No. Parameters Observation

1. Quantity of seed required in each sheet, (g) : 100 to 110

2. Number of sheets per ha. : 244 to 266

3. Av. Depth of transplanting, (cm) : 3 to 4

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 9 to 10

6. Av. Spacing between hills : 14

7. Av. Number of hills per sq. m. : 27 to 28

8. Av. Speed of operation, (km/h) : 1.76 to 1.81

9. Av. Area covered, (ha/h) : 0.163 to 0.172

10. Av. Time required to cover 1 ha, (h) : 5.81 to 6.13

11. Av. Total transplanting losses in 1 m2, (%) : 2.19 to 5.00

12. Av. Fuel consumption - l/h : 0.64 to 0.68

- l/ha : 3.72 to 4.17

Page 62: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 53 of 98

Make & Model of machine : Texas Pro Trac 950D Power Weeder (Commercial)

Test Report No. and Year of release : Machine-50/446, April, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Texas

- Power, (kW) (apa) : 3.48 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Cone clutch

2.2 Type of drive between gear box to drive shaft

: Cone clutch, with 1:1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Gear drive, with 3.28 : 1 reduction ratio

3. No. of rotor blades : 20

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : HAORUM

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1670 (L) x 700 (W) x 1130 (H)

7. Operational Mass, (kg) : 136

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.73 to 2.78

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 56 to 57

4. Av. Area covered, (ha/h) : 0.098 to 0.114

5. Av. Time required for 1 ha, (h) : 8.74 to 10.18

6. Av. Field efficiency, (%) : 63 to 73

7. Av. Weeding efficiency, (%) : 63 to 66

8. Av. Fuel consumption - l/h : 0.80 to 0.82

- l/ha : 7.04 to 8.30

Page 63: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 54 of 98

Make & Model of machine : Vijay 3 WPW Wet Paddy Weeder (Commercial)

Test Report No. and Year of release : Machine-51/447, April, 2014

Manufacturer‟s Address : M/s. Southern Agro Engine (P) Ltd., 24 A, III Phase, Industrial Estate, Guindy, Chennai - 600 032.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Vertical, Air cooled, Two- stroke, Single cylinder, Spark ignition engine

- Make : Vijay

- Power, (kW) (apa) : 1.5 @ 6000 ± 50 rpm

2. Power Transmission system

2.1 Type of drive gear : Worm gear, with 34:1 reduction ratio

2.2 Type of clutch : Centrifugal clutch

3. Rotor unit

-No. of rotor (s) : 3

-No. of tynes in a row : 5

-No. of tyne rows in a rotor : 6

4. Depth control Mechanism : Tail skid is provided

5. Overall Dimensions (mm) : 1250 (L) x 810 (W) x 820 (H)

6. Operational Mass, (kg) : 18

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.59 to 1.65

2. Type of weeds : Sunterla

3. Av. Width of cut, (cm) : 54.3 to 54.6

4. Av. Area covered, (ha/h) : 0.053 to 0.057

5. Av. Time required for one hectare, (h) : 17.54 to 18.87

6. Av. Field efficiency, (%) : 61 to 63

7. Av. Weeding efficiency, (%) : 65 to 70

8. Av. Row to row spacing of crop, (cm) : 30

9. Av. Fuel consumption - l/h : 0.63 to 0.70

- l/ha : 11.31 to 11.91

10. Recommended crop : Paddy

Page 64: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 55 of 98

Make & Model of machine : Ace RTT 2Z-8238B-SL-Z-E-P Self Propelled Riding Type 8

Row Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-52/448, May, 2014

Manufacturer Address : M/s. Action Construction Equipment Ltd., (Agri Equipment Division), Jajru Road, 25th Mile Stone, Mathura Road, Ballabgarh, Faridabad – 121 004, Haryana.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Four stroke, Air cooled, direct injection, Vertical, Compression ignition engine

-Make : Koop, China

-Power, (kW) (apa) : 3.4 @ 1700 rpm

2. Clutch

- Type : Dry, Friction cone clutch

3. Main Gear Box

- Type : Sliding mesh, spur gear

- No. of forward Speeds : 03 (One road + two planting speed)

- No. of reverse speeds : Nil

4. Planting Clutch

-Type : Fork positioned dog clutch

5. Planting gear box

-Type of drive from main gear box to planting gear box

: Bevel and pinion, with 1:1 reduction ratio

- No & type of gear on feed shaft : One, spur, 28 T

6. Planting arm drive

- Type : Chain and sprocket

7. Planting system

- No. & type of planting arms : Eight, Crank

- Spacing between rows, (mm) : 238

- Provision for hill spacing, (cm) : 12 and14

8. Seedling box Assembly

-Type : Inclined, sliding type

- Size, (mm) : 1890 x 725 (Curved) x 0.75

- No. of compartments : 08

- Size of each compartment, (mm) : 725 x 220 x 35 (depth)

9. Overall Dimensions, (mm) : 2600 (L) x 2150 (W) x 1980 (H)

10. Operational Mass, (kg) : 370

Field performance:

Sl. No. Parameters Observation

1. Quantity of seed required in each sheet, (g) : 100 to 110

2. Number of sheets per ha. : 268 to 285

3. Av. Depth of transplanting, (cm) : 4

4. Av. Spacing between rows, (cm) : 24

5. Av. Number of plants per hill : 9 to 11

6. Av. Spacing between hills : 12

7. Av. Number of hills per sq. m. : 45

8. Av. Speed of operation, (km/h) : 1.55 to 1.61

9. Av. Area covered, (ha/h) : 0.160 to 0.171

10. Av. Time required to cover 1 ha, (h) : 5.85 to 6.25

11. Av. Total transplanting losses in 1 m2, (%) : 2.22 to 6.67

12. Av. Fuel consumption - l/h : 0.77 to 0.83

- l/ha : 4.49 to 5.04

Page 65: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 56 of 98

Make & Model of machine : Vijay 2 WPW Wet Paddy Weeder (Commercial)

Test Report No. and Year of release : Machine-53/450, May, 2014

Manufacturer Address : M/s. Southern Agro Engine (P) Ltd., 24 A, III Phase, Industrial Estate, Guindy, Chennai - 600 032.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Vertical, Air cooled, Two- stroke, Single cylinder, Spark ignition engine

- Make : Vijay

- Power, (kW) (apa) : 1.5 @ 6000 ± 50 rpm

2. Power Transmission system

2.1 Type of drive gear : Worm gear, with 34:1 reduction ratio

2.2 Type of clutch : Centrifugal clutch

3. Rotor unit

-No. of rotor(s) : 2

-No. of tynes in a row : 1

-No. of tyne rows in a rotor : 4

4. Depth control Mechanism : Float is provided

5. Overall Dimensions (mm) : 1500 (L) x 735 (W) x 990 (H)

6. Operational Mass, (kg) : 16

Field performance:

Sl. No. Parameters Observation

1. Speed of operation, (km/h) : 1.94 to 2.00

2. Type of weeds : Sunterla

3. Width of cut, (cm) : 30.1 to 30.2

4. Area covered, (ha/h) : 0.037 to 0.040

5. Time required, (h/ha) : 25.00 to 27.03

6. Field efficiency, (%) : 63 to 67

7. Weeding efficiency, (%) : 65 to 73

8. Row to row spacing of crop, (cm) : 30

9. Fuel consumption - l/h : 0.85 to 0.90

- l/ha : 21.26 to 24.33

10. Recommended crop : Paddy

Page 66: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 57 of 98

Make & Model of machine : Texas Pro Trac 750D Power Weeder (Commercial)

Test Report No. and Year of release : Machine-54/451, May, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Texas

- Power, (kW) (apa) : 2.80 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Cone clutch

2.2 Type of drive between gear box to drive shaft

: Cone clutch, with 1:1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Gear drive, with 3.28 : 1 reduction ratio

3. No. of rotor blades : 16

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : HAORUM

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1670 (L) x 700 (W) x 1130 (H)

7. Operational Mass, (kg) : 136

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.07 to 2.40

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 36 to 37

4. Av. Area covered, (ha/h) : 0.049 to 0.057

5. Av. Time required for 1 ha, (h) : 17.45 to 20.30

6. Av. Field efficiency, (%) : 64 to 69

7. Av. Weeding efficiency, (%) : 63 to 65

8. Av. Fuel consumption - l/h : 0.69 to 0.70

- l/ha : 12.04 to 14.13

Page 67: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 58 of 98

Make & Model of machine : Texas RT 450 D Power Weeder (Commercial)

Test Report No. and Year of release : Machine-56/453, June, 2014

Applicant Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Texas

- Power, (kW) (apa) : 2.80 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Idler pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: Pulley and belt, with 3.02 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Worm and wheel, with 3.59 : 1 reduction ratio

3. No. of rotor blades : 16

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : HAORUM

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1670 (L) x 700 (W) x 1130 (H)

7. Operational Mass, (kg) : 136

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.08 to 1.25

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 37 to 38

4. Av. Area covered, (ha/h) : 0.024 to 0.030

5. Av. Time required for 1 ha, (h) : 33.78 to 40.98

6. Av. Field efficiency, (%) : 61 to 63

7. Av. Weeding efficiency, (%) : 61 to 64

8. Av. Fuel consumption - l/h : 0.60 to 0.63

- l/ha : 21.98 to 25.00

Page 68: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 59 of 98

Make & Model of machine : Texas Hobby 380 TG Power Weeder (Commercial)

Test Report No. and Year of release : Machine-57/454, June, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Four stroke, Air cooled, Over head valve, Single cylinder, Spark ignition engine

- Make : Texas

- Power, (kW) (apa) : 1.95 @ 3000 rpm

2. Transmission system

2.1 Type of clutch : Tensioner pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: V-belt and Pulley, with 1:1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Worm and wheel, with 4.33 : 1 reduction ratio

3. No. of rotor blades : 16

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : HAORUM

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1670 (L) x 700 (W) x 1130 (H)

7. Operational Mass, (kg) : 136

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.68 to 1.69

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 36 to 37

4. Av. Area covered, (ha/h) : 0.040 to 0.041

5. Av. Time required for 1 ha, (h) : 24.39 to 25.00

6. Av. Field efficiency, (%) : 65 to 67

7. Av. Weeding efficiency, (%) : 53 to 66

8. Av. Fuel consumption - l/h : 0.72 to 0.75

- l/ha : 17.49 to 18.33

Page 69: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 60 of 98

Make & Model of machine : Texas Hobby 500 TG Power Weeder (Commercial)

Test Report No. and Year of release : Machine-58/455, June, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Four stroke, Air cooled, Over head valve, Single cylinder, Spark ignition engine

- Make : Texas

- Power, (kW) (apa) : 2.20 @ 3000 rpm

2. Transmission system

2.1 Type of clutch : Tensioner pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: Belt and Pulley, with 1.14 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Worm and wheel, with 3.75 : 1 reduction ratio

3. No. of rotor blades : 16

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : HAORUM

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1670 (L) x 700 (W) x 1130 (H)

7. Operational Mass, (kg) : 136

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.63 to 1.65

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 47 to 48

4. Av. Area covered, (ha/h) : 0.052 to 0.055

5. Av. Time required for 1 ha, (h) : 18.18 to 19.23

6. Av. Field efficiency, (%) : 67 to 70

7. Av. Weeding efficiency, (%) : 60 to 68

8. Av. Fuel consumption - l/h : 0.77 to 0.80

- l/ha : 14.54 to 15.05

Page 70: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 61 of 98

Make & Model of machine : Texas Alligator 6DP Power Weeder (Commercial)

Test Report No. and Year of release : Machine-59/457, July, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Texas

- Power, (kW) (apa) : 3.48 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Idler pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: Gear drive, with 2.86 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Bevel and pinion, with 4.3 : 1 reduction ratio

3. No. of rotor blades : 32

4. Drive Wheel

-Type : Pneumatic, Traction

-Make (apa) : LB LUNTAI

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1680 (L) x 1000 (W) x 1050 (H)

7. Operational Mass, (kg) : 110

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.72 to 2.89

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 115

4. Av. Area covered, (ha/h) : 0.202 to 0.231

5. Av. Time required for 1 ha, (h) : 4.33 to 4.95

6. Av. Field efficiency, (%) : 64 to 71

7. Av. Weeding efficiency, (%) : 62 to 67

8. Av. Fuel consumption - l/h : 0.71 to 0.74

- l/ha : 3.12 to 3.51

Page 71: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 62 of 98

Make & Model of machine : Texas Lilli 532 TG Power Weeder (Commercial)

Test Report No. and Year of release : Machine-60/458, July, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition

engine

- Make : Texas

- Power, (kW) (apa) : 2.90 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Tensioner pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: V- belt and Pulley, with 4.26 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Chain and sprocket, with 5.71 : 1 reduction ratio

3. No. of rotor blades : 16

4. Transport Wheel

-Make (apa) : TEXAS

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1200 (L) x 580 (W) x 950 (H)

7. Operational Mass, (kg) : 58

Field performance: Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 2.13 to 2.14

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 53 to 54

4. Av. Area covered, (ha/h) : 0.068 to 0.071

5. Av. Time required for 1 ha, (h) : 14.10 to 14.71

6. Av. Field efficiency, (%) : 61 to 62

7. Av. Weeding efficiency, (%) : 52 to 61

8. Av. Fuel consumption - l/h : 0.85 to 0.87

- l/ha : 12.28 to 12.50

Page 72: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 63 of 98

Make & Model of machine : Texas TX 601 TG Power Weeder (Commercial)

Test Report No. and Year of release : Machine-61/459, July, 2014

Applicant‟s Address : Farm and Garden Technologies Pvt. Ltd., (Subsidiary unit of TEXAS A/S. Denmark), 544P Pace City 2, Sector 37, Gurgaon, Haryana - 122 001.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Four stroke, , Air cooled, Over head valve, Single cylinder, Spark ignition engine

- Make : Texas

- Power, (kW) (apa) : 3.48 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Tensioner pulley work as a main clutch

2.2 Type of drive between gear box to drive shaft

: V-belt and Pulley, with 4.42 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Chain and sprocket, with 1.1 : 1 reduction ratio

3. No. of rotor blades : 16

4. Transport Wheel

-Make (apa) : TEXAS

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1325 (L) x 840 (W) x 970 (H)

7. Operational Mass, (kg) : 50

Field performance: Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.86 to 1.89

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 81

4. Av. Area covered, (ha/h) : 0.095 to 0.099

5. Av. Time required for 1 ha, (h) : 10.10 to 10.53

6. Av. Field efficiency, (%) : 63 to 65

7. Av. Weeding efficiency, (%) : 58 to 61

8. Av. Fuel consumption - l/h : 0.95 to 1.05

- l/ha : 9.90 to 10.61

Page 73: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 64 of 98

Make & Model of machine : Shaktiman STMP-26 Self Propelled Platform for

Tree Maintenance (Commercial)

Test Report No. and Year of release : Machine-62/460, July, 2014

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna

Park, Gondal Road, N.H.-8B, Vavadi,

District: Rajkot - 360 004, Gujarat.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Four Stroke, Vertical, Water cooled, Compression ignition engine.

- Make : Kohler

- Model : KDW-702

- Power, (kW) : 10.2 @ 3200 rpm

2. Transmission system : Hydraulic transmission

3. Hydraulic system

3.1 Type of drive : Gear drive

3.2 Hydraulic pump

- Type & Make : Gear & Casappa

-Method of drive : Drive through engine flywheel

-Operating hydraulic pressure, (kgf/cm² )(apa) : 153

-Pressure release setting, (kgf/cm²) (apa) : 180

4. Lifting Assembly

-Minimum height of bucket base from ground level (mm)

: 700

-Maximum lifting height of bucket base, (mm) : 7600

5. Starting method : Self starting

6. Steering type : Hydraulic

7. Overall Dimensions, (mm) : 8000 (L) x 2650 (W) x 7700 (H)

8. Minimum ground clearance, (mm) : 225 (At leg below axle)

9. Operational Mass, (kg) : 2025

Field performance:

Sl. No. Parameters Observation

1. Avg. Dia. of branches, (mm) : 110.9 to 193.6

2. Avg. time taken for cutting ϕ100 mm branch, (sec)

: 5.25 to 6.61

3. Avg. Time taken for cutting per cm2 of cross sectional area, (cm2/sec)

: 14.95 to 15.12

4. Avg. Lifting time, (sec) : 8.56 to 14.54

5. Avg. Lowering time, (sec) : 11.0 to 18.6

6. Avg. Fuel consumption, (l/h) : 2.50 to 2.65

7. Avg. Height of cutting branches from ground level, (m)

: 3.1 to 5.2

8. Type of tree, the machine got tested at : Neem

Page 74: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 65 of 98

Make & Model of machine : DFAMGC DF-15DLG Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-60/461, July, 2014

Applicant‟s Address : M/s. George Maijo Industries Pvt. Ltd., 2 B, Apex Plaza, 5, Nungambakkam High Road, Chennai - 600 034.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changchai

-Model : E HZS 1105 N

-Max. power, (kW) : 10.1 @ 2000 rpm

2. -Max. power of rotary, (kW) : 9.0 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.6 @ 2079

- Maximum drawbar power, (kW.) : 5.3 @ 2064

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2960 (L) x 940 (W) x 1270 (H)

6. Minimum ground clearance, (mm) : 190 (At axle portal housing drain plug)

7. Operational Mass with rotary tiller, (kg) : 496

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.0 to 4.8 10.0

3. Av. Puddling index, (%) : -- 72 to 75

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 3.03 to 3.09 1.72 to 1.79

6. Av. wheel slip/travel reduction, (%) : -5.0 to -8.9 1.78 to 2.30

7. Av. depth of cut/depth of puddle, (cm) : 4.0 20.0

8. Av. working width, (cm) : 57.0 to 58.0 --

9. Av. Area covered, (ha/h) : 0.113 to 0.124 --

10. Av. Fuel consumption - l/h : 1.29 to 1.40 1.41 to 1.45

- l/ha : 10.84 to 12.39 --

Page 75: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 66 of 98

Make & Model of machine : Rhino RH 178F Power Weeder (Commercial)

Test Report No. and Year of release : Machine-63/462, August, 2014

Applicant‟s Address : M/s. Assam Saii Motors Pvt. Ltd., 1A, Nanda Mallick Lane, Kolkata - 700 006, W.B.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Single cylinder, Air cooled, Vertical, 4 stroke, Compression ignition engine

- Make : Rhino

- Power, (kW) (apa) : 3.6 @ 2800 rpm

2. Transmission system

2.1 Type of clutch : Wet type, friction multi plate

2.2 Type of drive between gear box to drive shaft

: Gear drive, with 2.79 :1 reduction ratio

2.3 Type of drive between gear box to rotary shaft

: Bevel gear, with 4.3 : 1 reduction ratio

3. No. of rotor blades : 32

4. Drive Wheel

-Type : Pneumatic

-Make (apa) : Swan, China

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1720 (L) x 1210 (W) x 1050 (H)

7. Operational Mass, (kg) : 120

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.18 to 1.45

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 102 to 105

4. Av. Area covered, (ha/h) : 0.073 to 0.098

5. Av. Time required for 1 ha, (h) : 10.20 to 13.70

6. Av. Field efficiency, (%) : 61 to 65

7. Av. Weeding efficiency, (%) : 54 to 58

8. Av. Fuel consumption - l/h : 0.62 to 0.72

- l/ha : 7.29 to 9.32

Page 76: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 67 of 98

Make & Model of machine : Shaktiman SMS 540 S Mobile Shredder (Tractor Mounted) (Commercial)

Test Report No. and Year of release : Machine-64/463, August, 2014

Applicant‟s Address : Tirth Agro Technology Pvt. Ltd., Near-Hotel Krishna Park, Gondal Road, NH-8B, Vavadi, Rajkot (Gujarat), Pin Code - 360 004.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 40 and above

2. Primary gear box

-Type : Bevel gear

-Type of drive : Bevel pinion and crown wheel, with 1.39 : 1 reduction ratio

3. Secondary gear box

-Type : Spur and bevel gear

-Type of drive : Bevel pinion and crown wheel, with 1.44 : 1 reduction ratio

4. Feeding system

4.1 Conveyor system

-Type : Roller

- No. of blades : 3+3

- Type of drive : Gear drive, with 3.72 : 1 reduction ratio

5. Mobile cutting unit

- Type : Disc

- Speed of disc corresponding to 540 rpm of TO,(rpm):

: 116

6. Trash cutting unit

6.1 Fly wheel

-Type : Circular with palate

-No. of blades 06 (12 Nos. optional)

- Speed corresponding to 540 rpm of PTO, (rpm): : 1406

7. Concave

- Type : Rasp bar

- Clearance between concave plate and flywheel palate, (mm)

: 8 to 16

8. Overall Dimensions, (mm) : Mobile condition - 2280 (L) x 2530 (W) x 3050 (H), Stationary condition – 1700 (L) x 2530 (W) x 1375 (H)

9. Operational Mass, (kg) : Mobile condition – 657 Stationary condition - 621

Field performance:

Sl. No. Parameters Observation

Mobile Condition Stationary Condition

1 Av. Speed of operation, (kmph) : 4.53 to 4.58 -

2 Av. Length of stalk (feed) before operation, (mm) : 1170 to 1360 4000

3 Av. Length of stalk after cutting operation, (mm) : 20 to 50 40 to 70

4 Av. Mass of stalk (feed) before operation, (g/10 m²) : 2567 to 2732 -

5 Av. Through put, (g/10 m²)/(kg/h) : 2230 to 2481 1973 to 2417

6 Av. Stubble height, (mm) : 95 to 105 -

7 Av. Dai. Of trash, (mm) : 11 to 12 70 to 72

8 Av. Area covered, (ha/h)/Feed rate, (kg/h) : 0.361 to 0.399 2073 to 2488

9 Av. Field efficiency, (%) 80 to 87 -

10 Av. Fuel consumption, (l/h) 4.75 to 4.93 8.93 to 9.30

11 Name of crop, the machine got tested at : Cotton stalk Coconut Frond and

Coconut Spathe

Page 77: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 68 of 98

Make & Model of machine : Greaves GS 14 DIL Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-61/464, August, 2014

Applicant‟s Address : M/s. Greaves Cotton Ltd., Farm Equipment Business, Petrol Engine Unit, F-62 & 63, SIPCOT Industrial Complex, Gummidipoondi - 601 201.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Greaves GS 14 DIL Power Tiller was initially tested at this Institute vide test report number PT-10/280, March, 2010. During ICT, though water ingress was observed on LHS of rotor shaft bearing cap; the same was rectified during supplementary test bearing test report number PT-12/294, September, 2010. In the backdrop of this it was deemed fit and proper to conduct 10 hours wetland test even though, field test is not required for batch test.

2. Engine

-Type : 4 stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

-Model : GS 14 DIL

-Max. power, (kW) : 9.8 @ 2000 rpm

3. -Max. power of rotary shaft, (kW) : 7.8 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.2 @ 2046 rpm

- Maximum drawbar power, (kW.) : 4.1 @ 2063 rpm

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2925 (L) x 965 (W) x 1260 (H)

7. Minimum ground clearance, (mm) : 180 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 484

Field performance:

Sl. No. Parameters Observation

1. Type of soil : Light

2. Av. Depth of Standing water, (cm) : 10

3. Av. Puddling Index, (%) : 71

4. Gear used : L-1

5. Av. Speed of operation, (km/h) : 1.82 to 1.90

6. Av. Travel reduction, (%) : 2.85 to 6.80

7. Av. Depth of puddle, (cm) : 18 to 19

8. Av. Fuel consumption, (l/h) : 1.32 to 1.36

Page 78: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 69 of 98

Make & Model of machine : Greaves GS 14 DLX Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-62/465, September, 2014

Applicant‟s Address : M/s. Greaves Cotton Ltd., Farm Equipment Business,

Petrol Engine Unit, F-62 & 63, SIPCOT Industrial Complex, Gummidipoondi - 601 201.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Greaves GS 14 DIL Power Tiller was initially tested at this Institute vide test report number PT-10/280, March, 2010. Subsequently Greaves GS 14 DLX was tested as variant model; vide test report number PT-15/316, March, 2010. This report is pertaining to batch testing of variant model Greaves GS 14 DLX. Field test is not required for batch test.

2. Engine

-Type : 4 stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Changzhou Machinery & Equipment

Imp. & Exp. Co. Ltd.

-Model : GS 14 DIL

-Max. power, (kW) : 11.2 @ 2000 rpm

3. -Max. power of rotary shaft, (kW) : 9.5 @ 1999 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.4 @ 2078 rpm

- Maximum drawbar power, (kW.) : 4.3 @ 2070 rpm

4. Transmission system

4.1 Clutch

- Type : Dry, friction plate

- Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

4.2 Chain case

- Drive type : Double roller, with 1.43 : 1 reduction ratio

4.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

4.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

5. Starting method : Manual, Hand cranking

6. Steering system : Steering clutch levers provided

7. Overall Dimensions, (mm) : 2875(L) x 965 (W) x 1320 (H)

8. Minimum ground clearance, (mm) : 175 (At axle portal housing)

9. Operational Mass with rotary tiller, (kg) : 484

Page 79: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 70 of 98

Make & Model of machine : Greaves GS 15 DIL S Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-63/466, September, 2014

Applicant‟s Address : M/s. Greaves Cotton Ltd., Farm Equipment Business,

Petrol Engine Unit, F-62 & 63, SIPCOT Industrial Complex, Gummidipoondi - 601 201.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Greaves GS 14 DIL Power Tiller was initially tested at CFMTTI, Budni Institute vide test report number PT-76/995, December, 2004, by the name of “Greaves GS 15 DIL”. Ministry had later approved for changing of name as of “Greaves GS 15 DIL S” vide their letter No. 13-64/2002-my (I&P), dated: 14th July, 2008. Hence the Batch Test was accepted to be carried out by the name “Greaves GS 15 DIL S”. Field test is not required for batch test.

2. Engine

-Type : 4 stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

-Model : ZS 1100A2N

-Max. Power, (kW) : 11.3 @ 2050 rpm

3. -Max. power of rotary shaft, (kW) : 9.5 @ 2052 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.3 @ 2168 rpm

- Maximum drawbar power, (kW.) : 4.8 @ 2160 rpm

4. Transmission system

4.1 Clutch

- Type : Dry, friction plate

- Make : Changzhou Dongfeng Agriculture

Machinery Group Co. Ltd., (DFAM)

4.2 Chain case

- Drive type : Double roller, with 1.43 : 1 reduction ratio

4.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make Changzhou Dongfeng Agriculture Machinery Group Co. Ltd., (DFAM)

4.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

5. Starting method : Manual, Hand cranking

6. Steering system : Steering clutch levers provided

7. Overall Dimensions, (mm) : 2940(L) x 1010 (W) x 1310 (H)

8. Minimum ground clearance, (mm) : 170 (At axle portal housing)

9. Operational Mass with rotary tiller, (kg) : 478

Page 80: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 71 of 98

Make & Model of machine : Rhino 15 DI Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-64/467, September, 2014

Applicant‟s Address : M/s. Assam Saii Motors Pvt. Ltd., (Formaly

Shree Ambica Iron Industries), 1A, Nanda

Mallick Lane, Kolkata - 700 006, West Bengal.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : 4 stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Changchai

-Model : HZS 1100N

-Power, (kW) : 9.9 @ 2000 rpm

2. -Power of rotary shaft, (kW) : 8.9 @ 1998 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.3 @ 2073 rpm

- Maximum drawbar power, (kW.) : 4.3 @ 2070 rpm

3. Transmission system

3.1 Clutch

- Type : Dry, friction plate

- Make : CZDFAM

3.2 Chain case

- Drive type : Double roller, with 1.43 : 1 reduction ratio

3.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make CZDFAM

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2980(L) x 965 (W) x 1275 (H)

7. Minimum ground clearance, (mm) : 190 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 482

Page 81: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 72 of 98

Make & Model of machine : Escort NSE RP Rotopuddler (Tractor Mounted)

(Commercial)

Test Report No. and Year of release : IMP-295/468, September, 2014

Applicant‟s Address : Escorts Ltd. Knowledge Management Centre, 15/5 Mathura Road, Faridabad, Haryana - 121 003.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (kW) (apa) : 30.2 47.8

2. Rotor

-Type of rotor axle : Tubular section with pocket welded over it for mounting of blades

-No. of pockets : 62 Nos.

2.1 Rotor blades

-Type : Neither „S‟ type nor „L‟ type

-No. of blades : 62

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 261

3. Depth control mechanism

3.1 Skid

-Type : MS flat

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 03 nos of holes

- Range of depth adjustment, (mm) : Up to 40

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel pinion, with 1 : 0.565 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Chain drive, with 1 : 0.857 reduction ratio

5. Overall Dimensions, (mm) : 3050 (L) x 1070 (W) x 1170 (H)

6. Operational Mass, (kg) : 430

Field performance:

Sl. No. Parameters Observation

Puddling Operation

1. Gear used : L-1 L-2

2. Type of soil : Light

3. Av. Speed of operation, (kmph) 2.80 to 2.96 3.00

4. Av. Depth of standing water, (cm) : 9.0 9.0

5. Av. puddling Index, (%) : 78 83

6. Av. Depth of puddle, (cm) : 17 to 19 17

7. Av. Fuel consumption, (l/h) : 3.90 to 4.10 2.60

Page 82: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 73 of 98

Make & Model of machine : JK-150 Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-296/469, September, 2014

Applicant‟s Address : Sri Sai Lakshmi Industries, Sy. No. 133, Road No.5,

Samathapuri Colony, Nagole, Hyderabad - 500 035.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 35 to 45 Hp

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 06 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 36

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 223

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 06 nos of holes

- Range of depth adjustment, (mm) : 14 to 37

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.06 : 1 & 1.64 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.4 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1740 (L) x 870 (W) x 1070 (H)

6. Operational Mass, (kg) : 410

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-2

2. Av. Speed of operation, (kmph) : 2.68 to 2.74 2.79 to 2.89

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 4.8 to 5.3 10.0

4. Av. Bulk density of soil, (g/cc) : 1.55 to 1.61 -

5. Av. Depth of cut/depth of puddle, (cm) : 7.0 to 9.0 19 to 20

6. Av. Working width, (cm) : 145 to 150 -

7. Av. Area covered, (ha/h) : 0.270 to 0.284 -

8. Av. Time required for one hectare, (h) : 3.52 to 3.70 -

9. Av. Field efficiency/puddling Index, (%) : 67 to 72 73 to 75

10. Av. Fuel consumption, (l/h)

-l/h : 3.28 to 3.45 3.43 to 3.46

-l/ha : 11.55 to 12.36 -

Page 83: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 74 of 98

Make & Model of machine : JK-180 Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-297/470, October, 2014

Applicant‟s Address : Sri Sai Lakshmi Industries, Sy. No. 133, Road No.5, Samathapuri Colony, Nagole, Hyderabad - 500 035.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 45 to 55

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 07 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 42

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 223

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 06 nos of holes

- Range of depth adjustment, (mm) : 12 to 42

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.06 : 1 & 1.64 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.4 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1970 (L) x 900 (W) x 1040 (H)

6. Operational Mass, (kg) : 436

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : A-2 A-2

2. Av. Speed of operation, (kmph) : 2.89 to 3.09 2.96 to 2.97

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 4.8 to 6.0 10.0

4. Av. Bulk density of soil, (g/cc) : 1.49 to 1.61 -

5. Av. Depth of cut/depth of puddle, (cm) : 9 to 10 21 to 22

6. Av. Working width, (cm) : 171 to 174 -

7. Av. Area covered, (ha/h) : 0.351 to 0.371 -

8. Av. Time required for one hectare, (h) : 2.70 to 2.85 -

9. Av. Field efficiency/puddling Index, (%) : 68 to 72 76 to 78

10. Av. Fuel consumption

-l/h : 5.40 to 5.88 5.60 to 5.83

-l/ha : 14.90 to 16.39 -

Page 84: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 75 of 98

Make & Model of machine : Gousiya Engineering GS-150 Rotavator

(Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-298/471, October, 2014

Applicant‟s Address : Gousiya Engineering Works, Plot No. 318, Auto Nagar, Venkateswara Puram, Nandyal - 518 504, Distt. Kurnool, A.P.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 35 to 45

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 06 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 36

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 275

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 06 nos of holes

- Range of depth adjustment, (mm) : 23 to 44

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1 : 1.36 & 2 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.33 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1730 (L) x 1100 (W) x 1080 (H)

6. Operational Mass, (kg) : 410

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-1

2. Av. Speed of operation, (kmph) : 3.47 to 3.66 2.28 to 2.41

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 4.8 to 5.8 9 to 10

4. Av. Bulk density of soil, (g/cc) : 1.47 to 1.51 -

5. Av. Depth of cut/depth of puddle, (cm) : 7 19 to 20

6. Av. Working width, (cm) : 141 to 142 -

7. Av. Area covered, (ha/h) : 0.351 to 0.366 -

8. Av. Time required for one hectare, (h) : 2.73 to 2.85 -

9. Av. Field efficiency/puddling Index, (%) : 70 to 71 75 to 76

10. Av. Fuel consumption

-l/h : 3.46 to 3.68 3.41 to 3.63

-l/ha : 9.45 to 10.49 -

Page 85: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 76 of 98

Make & Model of machine : Farmak FMK-150 Rotavator

(Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-299/472, October, 2014

Applicant‟s Address : V R Agro Equipments, #7-299, Veera Reddy Building, Allagadda - 518 543, Kurnool (Dist.), Andhra Pradesh.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 35 to 45

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 07 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 36

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 231

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 06 nos of holes

- Range of depth adjustment, (mm) : 9 to 23

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1 : 1.06 & 1.77 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.40 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1740 (L) x 840 (W) x 1150 (H)

6. Operational Mass, (kg) : 452

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-2

2. Av. Speed of operation, (kmph) : 2.87 to 2.95 2.61 to 2.78

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 4.8 to 5.5 10

4. Av. Bulk density of soil, (g/cc) : 1.51 to 1.59 -

5. Av. Depth of cut/depth of puddle, (cm) : 6 to 8 19 to 21

6. Av. Working width, (cm) : 145 to 147 -

7. Av. Area covered, (ha/h) : 0.297 to 0.309 -

8. Av. Time required for one hectare, (h) : 3.24 to 3.37 -

9. Av. Field efficiency/puddling Index, (%) : 69 to 73 75 to 77

10. Av. Fuel consumption

-l/h : 4.26 to 4.66 3.88 to 4.05

-l/ha : 14.36 to 15.10 -

Page 86: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 77 of 98

Make & Model of machine : Farmak FMK-180 Rotavator

(Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-300/473, October, 2014

Applicant‟s Address : V R Agro Equipments, #7-299, Veera Reddy Building, Allagadda - 518 543, Kurnool (Dist.), Andhra Pradesh.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 45 to 50

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 08 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 42

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 259

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 06 nos of holes

- Range of depth adjustment, (mm) : 9 to 27

4. Power transmission system

4.1 Primary reduction

-Type of drive : Spur and bevel pinion, with 1.19 : 1 & 1.77 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.40 : 1 reduction ratio

5. Overall Dimensions, (mm) : 2210 (L) x 1020 (W) x 1150 (H)

6. Operational Mass, (kg) : 480

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-1

2. Av. Speed of operation, (kmph) : 3.22 to 3.43 2.33 to 2.60

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.3 10

4. Av. Bulk density of soil, (g/cc) : 1.49 to 1.59 -

5. Av. Depth of cut/depth of puddle, (cm) : 9 to 10 20 to 22

6. Av. Working width, (cm) : 172 -

7. Av. Area covered, (ha/h) : 0.382 to 0.415 -

8. Av. Time required for one hectare, (h) : 2.41 to 2.62 -

9. Av. Field efficiency/puddling Index, (%) : 69 to 73 76 to 78

10. Av. Fuel consumption

-l/h : 5.33 to 5.40 5.10 to 5.62

-l/ha : 12.85 to 14.10 -

Page 87: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 78 of 98

Make & Model of machine : Farmak FMK-8 Row Seed cum Fertilizer Drill (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-301/474, November, 2014

Applicant‟s Address : V R Agro Equipments, #7-299, Veera Reddy Building, Allagadda - 518 543, Kurnool (Dist.), Andhra Pradesh.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 30 to 50

Size, (mm) : 327 x 8 (Adjustable)

Seed on which test trials were requested to be

conducted

: Jawar and Bengal gram

2. Tyne

- No, if tynes : Eight

- Type of tyne : Curved, rigid

- Spacing of tynes : 200 to 350 (adjustable)

- Arrangement of tynes on main frame : All tynes are arranged in a single row

2.1 Furrow openers

-Type : Shovel

-No. of furrow openers : 8

3. Type of seed cum fertilizer box (Hopper)

-Type : Two Nos. of boxes are there, one for seed and other for fertilizer

- Capacity with seed/fertilizer, (kg) : 60 (Jawar), 54 (Bengal gram), 52 (Urea)

4. Metering mechanism

4.1 Seed metering mechanism

- Type : A plate with 10 grooves to carry the grains, rotates vertically

- Method of drive : Chain and sprocket

4.2 Fertilizer metering mechanism

-Type : A plate with 10 grooves to carrythe grains, rotates vertically

- Method of drive : Chain and sprocket

5. Overall Dimensions, (mm) : 2745 (L) x 1370 (W) x 1570 (H)

6. Operational Mass with Jawar and Urea, (kg) : 557

Field performance: Sl. No. Parameters Observation

Jawar Bengal gram

1. Gear used : A-3 A-3

2. Av. Speed of operation, (kmph) : 2.91 to 2.93 2.88 to 2.90

3. Av. Soil moisture (%) : 11.0 to 12.0 11.3 to 11.5

4. Number of seeds in 100 gram sampl : 3178 462

Bulk density of seed, (g/cc) 0.822 0.810

5. Av. depth of seed, (cm) : 5.1 to 5.2 7.8

Av. depth of fertilizer : 4.0 to 4.3 6.3

6. Seed rate, (kg/ha) : 16.02 to 16.70 74.28 to 84.10

Fertilizer rate, (kg/ha) : 111.36 to 115.50 122.00 to 123.50

7. Av. Area covered, (ha/h) : 0.471 to 0.484 0.477 to 0.488

8. Av. Time required for one hectare, (h) : 2.07 to 2.12 2.05 to 2.10

9. Av. Field efficiency, (%) : 70 to 72 70 to 71

10. Av. Fuel consumption

-l/h : 3.28 to 3.44 3.65

-l/ha : 6.95 to 7.12 7.48 to 7.67

Page 88: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 79 of 98

Make & Model of machine : Bheem BMRT5C Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-302/475, November, 2014

Applicant‟s Address : Renaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.),

Palladam Taluk, Coimbatore - 641 658.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 35 to 45

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 06 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 36

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 233

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 07 nos of holes

- Range of depth adjustment, (mm) : 22 to 47

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel pinion, with 1.82 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Chain and sprocket, with 1.27 : 1 reduction ratio

5. Overall Dimensions, (mm) : 1730 (L) x 810 (W) x 1000 (H)

6. Operational Mass, (kg) : 330

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 L-2

2. Av. Speed of operation, (kmph) : 2.80 to 2.82 2.80 to 2.95

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.0 to 5.3 10 to 11

4. Av. Bulk density of soil, (g/cc) : 1.52 to 1.55 -

5. Av. Depth of cut/depth of puddle, (cm) : 6 to 7 19 to 20

6. Av. Working width, (cm) : 148 to 149 -

7. Av. Area covered, (ha/h) : 0.291 to 0.301 -

8. Av. Time required for one hectare, (h) : 3.32 to 3.44 -

9. Av. Field efficiency/puddling Index, (%) : 70 to 72 73 to 77

10. Av. Fuel consumption

-l/h : 3.38 to 3.70 3.36 to 3.41

-l/ha : 11.29 to 12.36 -

Page 89: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 80 of 98

Make & Model of machine : Bheem BMRT6C Rotavator (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-303/476, November, 2014

Applicant‟s Address : Renaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.),

Palladam Taluk, Coimbatore - 641 658.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 40 to 55

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades

-No. of flanges : 07 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : L-Type

-No. of blades : 42

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 233

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 07 nos of holes

- Range of depth adjustment, (mm) : 22 to 53

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel pinion, with 1.82 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Chain and sprocket, with 1.27 : 1 reduction ratio

5. Overall Dimensions, (mm) : 2000 (L) x 810 (W) x 1000 (H)

6. Operational Mass, (kg) : 358

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Gear used : L-2 A-2

2. Av. Speed of operation, (kmph) : 3.56 to 3.74 2.99 to 3.06

3. Av. Soil moisture (%)/Depth of standing water, (cm) : 5.0 to 5.3 10

4. Av. Bulk density of soil, (g/cc) : 1.53 to 1.58 -

5. Av. Depth of cut/depth of puddle, (cm) : 8 to 9 21

6. Av. Working width, (cm) : 174 to 175 -

7. Av. Area covered, (ha/h) : 0.442 to 0.461 -

8. Av. Time required for one hectare, (h) : 2.17 to 2.26 -

9. Av. Field efficiency/puddling Index, (%) : 70 to 72 74 to 75

10. Av. Fuel consumption

-l/h : 5.80 to 6.45 5.56 to 5.68

-l/ha : 12.90 to 14.00 -

Page 90: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 81 of 98

Make & Model of machine : Greaves GS 15 DIL Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-65/477, November, 2014

Applicant‟s Address : M/s. Greaves Cotton Ltd., Farm Equipment Business,

Petrol Engine Unit, F-62 & 63, SIPCOT Industrial Complex, Gummidipoondi - 601 201.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : 4 stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

-Model : ZS 1100A2N

-Max. Power, (kW) : 10.8 @ 2000 rpm

2. -Max. power of rotary shaft, (kW) : 9.4 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.4 @ 2049 rpm

- Maximum drawbar power, (kW.) : 4.0 @ 2038 rpm

3. Transmission system

3.1 Clutch

- Type : Dry, friction plate

- Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

3.2 Chain case

- Drive type : Double roller, with 1.43 : 1 reduction ratio

3.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make : Changzhou Machinery & Equipment Imp. & Exp. Co. Ltd.

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.17 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2940(L) x 960 (W) x 1315 (H)

7. Minimum ground clearance, (mm) : 185 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 480

Page 91: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 82 of 98

Make & Model of machine : ACE APT-15 Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-66/478, December, 2014

Applicant‟s Address : Action Construction Equipment Ltd., Dudhola Link Road, Dudhola, Distt. Palwal - 121 102, Haryana.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Changchai

-Model : HZS 1105 N

-Max. power, (kW) : 10.2 @ 2000 rpm

2. -Max. power of rotary, (kW) : 9.0 @ 2000 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.5 @ 2065 rpm

- Maximum drawbar power, (kW.) : 4.7 @ 2053 rpm

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2930 (L) x 970 (W) x 1260 (H)

6. Minimum ground clearance, (mm) : 175 (At axle portal housing drain plug)

7. Operational Mass with rotary tiller, (kg) : 488

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.8 to 6.8 10.0

3. Av. Puddling index, (%) : -- 71 to 74

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 3.06 to 3.12 1.74 to 1.82

6. Av. wheel slip/travel reduction, (%) : -2.8 to -1.7 2.17 to 3.90

7. Av. depth of cut/depth of puddle, (cm) : 5.0 to 6.0 18.0 to 19.0

8. Av. working width, (cm) : 57.0 to 59.0 --

9. Av. Area covered, (ha/h) : 0.122 to 0.127 --

10. Av. Fuel consumption - l/h : 1.30 to 1.40 1.35 to 1.39

- l/ha : 10.48 to 11.48 --

Page 92: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 83 of 98

Make & Model of machine : Rhino RH 8 Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-65/479, December, 2014

Applicant‟s Address : M/s. Assam Saii Motors Pvt. Ltd., 1A, Nanda Mallick Lane,

Kolkata - 700 006, W.B.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Four stroke, Air cooled, direct injection, Horizontal, Compression ignition engine

-Make : Rhino

-Power, (kW) (apa) : 2.94

2. Clutch

- Type : Friction cone clutch

3. Main Gear Box

- Type : Sliding mesh

- No. of forward Speeds : 02

- No. of reverse speeds : 01

4. Planting Clutch

-Type : Fork positioned dog clutch

5. Planting gear box

-Type of drive from main gear box to planting gear box

: Bevel and pinion, with 1:1 reduction ratio

- No & type of gear on feed shaft : One, spur, 28 T

6. Planting arm drive

- Type : Chain and sprocket

7. Planting system

- No. & type of planting arms : Eight, Crank

- Spacing between rows, (mm) : 238

- Provision for hill spacing, (cm) : 12 and 14

8. Seedling box Assembly

-Type : Inclined, sliding type

- Size, (mm) : 1890 x 740 (Curved) x 0.40

- No. of compartments : 08

- Size of compartment, (mm) : 725 x 220 x 36 (depth)

9. Overall Dimensions, (mm) : 2710 (L) x 2210 (W) x 1220 (H)

10. Operational Mass, (kg) : 318

Field performance:

Sl. No. Parameters Observation

1. Quantity of seed required, (kg) : 12 for open pollinated varieties and 9 for hybrid varieties

2. Number of sheets per ha. : 512 to 532

3. Av. Depth of transplanting, (cm) : 5

4. Av. Spacing between rows, (cm) : 24

5. Av. Number of plants per hill : 6 to 7

6. Av. Spacing between hills : 14

7. Av. Number of hills per sq. m. : 28

8. Av. Speed of operation, (km/h) : 1.30 to 1.35

9. Av. Area covered, (ha/h) : 0.122 to 0.142

10. Av. Time required to cover 1 ha, (h) : 7.04 to 8.20

11. Av. Total transplanting losses in 1 m2, (%) : 2.85 to 3.57

12. Av. Fuel consumption - l/h : 0.45 to 0.53

- l/ha : 3.17 to 4.37

Page 93: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 84 of 98

Make & Model of machine : Varushapriya RGO 60 SD Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-66/480, December, 2014

Applicant‟s Address : Varushapriya Agro Tech Pvt. Ltd., No. 195, 7th Cross, 1st Stage, Indiranagar, Bangalore-560 038, Karnataka.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Three cylinder, Four stroke, Water cooled, Vertical, Compression ignition engine

-Make : Mitsubishi Company Ltd., Japan

-Max. Power, (kW) : 12.4 @ 2300 rpm

2. Safety clutch

- Type : Torque limiter, claw type

- Numbers : Three (each for two rows)

3. Transmission system

- Type : Hydro static transmission

- No. of forward Speeds : 02

- No. of reverse speeds : 01

4. Planting Clutch

-Type : Claw and pawl

5. Central planting gear box

-Type : Combination of sliding and constant mesh

6. Steering wheel

- Type : Power operated

7. Planting mechanism

- No. & type of planting arms : Six, Rotary

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (cm) : 14, 16, 18, 22 and 24

8. Seedling feeding mechanism

8.1 Seedling platform assembly

-Type : Inclined, sliding type with six sections supported by three floats

- Size, (mm) : 1280 x 285

9. Hydraulic pump

- Type : Gear

- Number of pumps : Two

10. Overall Dimensions, (mm) : 3580 (L) x 3570 (With side markers)/2100 (Without side markers) (W) x2035 (Plating board in lifted position) /1290 (Planting board in lowered position)(H)

11. Operational Mass, (kg) : 792

Field performance: Sl. No. Parameters Observation

1. Quantity of seed required in each tray, (g) : 80 to 100

2. Number of seedling trays per ha. : 176 to 182

3. Av. Depth of transplanting, (cm) : 4 to 5

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 5

6. Av. Spacing between hills : 18

7. Av. Number of hills per sq. m. : 24

8. Av. Speed of operation, (km/h) : 4.37 to 4.42

9. Av. Area covered, (ha/h) : 0.442 to 0.489

10. Av. Time required to cover 1 ha, (h) : 2.04 to 2.26

11. Av. Total transplanting losses in 1 m2, (%) : 0.83 to 2.50

12. Av. Fuel consumption - l/h : 2.60 to 3.05

- l/ha : 5.03 to 6.89

Page 94: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 85 of 98

Make & Model of machine : Varushapriya RGO 60 Self Propelled Riding Type Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-67/481, December, 2014

Applicant‟s Address : Varushapriya Agro Tech Pvt. Ltd., No. 195, 7th Cross, 1st Stage, Indiranagar, Bangalore-560 038, Karnataka.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Two cylinder, Four stroke, Air cooled, 'V' type, Spark ignition engine

-Make : Honda

-Max. Power, (kW) : 12.1 @ 3300 rpm

2. Safety clutch

- Type : Torque limiter, claw type

- Numbers : Three (each for two rows)

3. Transmission system

- Type : Hydro static transmission

- No. of forward Speeds : 02

- No. of reverse speeds : 01

4. Planting Clutch

-Type : Claw and pawl

5. Central planting gear box

-Type : Combination of sliding and constant mesh

6. Steering wheel

- Type : Power operated

7. Planting mechanism

- No. & type of planting arms : Six, Rotary

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (cm) : 12, 14, 16, 18 and 20

8. Seedling feeding mechanism

8.1 Seedling platform assembly

-Type : Inclined, sliding type with six sections supported by three floats

- Size, (mm) : 1280 x 285

9. Hydraulic pump

- Type : Gear

- Number of pumps : Two

10. Overall Dimensions, (mm) : 3220 (L) x 3650 (With side markers)/2130 (Without side markers) (W) x 1820 (Plating board in lifted position) /1290 (Planting board in lowered position)(H)

11. Operational Mass, (kg) : 665

Field performance: Sl. No. Parameters Observation

1. Quantity of seed required in each tray, (g) : 80 to 100

2. Number of seedling trays per ha. : 181 to 188

3. Av. Depth of transplanting, (cm) : 5

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 5

6. Av. Spacing between hills : 18

7. Av. Number of hills per sq. m. : 24

8. Av. Speed of operation, (km/h) : 4.14 to 4.43

9. Av. Area covered, (ha/h) : 0.401 to 0.487

10. Av. Time required to cover 1 ha, (h) : 2.05 to 2.49

11. Av. Total transplanting losses in 1 m2, (%) : 0.83 to 2.50

12. Av. Fuel consumption - l/h : 3.95 to 4.23

- l/ha : 8.10 to 10.53

Page 95: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 86 of 98

Make & Model of machine : Varushapriya RR4B Self Propelled Walk Behind Rice Transplanter (Commercial)

Test Report No. and Year of release : Machine-68/482, December, 2014

Applicant‟s Address : Varushapriya Agro Tech Pvt. Ltd., No. 195, 7th Cross, 1st Stage, Indiranagar, Bangalore-560 038, Karnataka.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Single cylinder, Four stroke, Air cooled, Vertical , Spark ignition engine

-Make : Subaru

-Power, (kW) (apa) : 2.7

2. Clutch

- Type : Tensioner pulley work as clutch

3. Main Gear Box

- Type : Sliding and constant mesh

- No. of forward Speeds : 02

- No. of reverse speeds : 01

4. Planting Clutch

-Type : Dog clutch

5. Planting gear box

-Type of drive from main gear box to planting gear box

: Solid shaft, with 1:1 reduction ratio

6. Planting arm drive

- Type : Bevel and pinion

7. Planting system

- No. & type of planting arms : Four, fork

- Spacing between rows, (mm) : 300

- Provision for hill spacing, (cm) : 14, 16, 18 and 22

8. Seedling platform Assembly

-Type : Rectangular, Inclined

- Size of each seedling section, (mm) : 850 x 285

9. Hydraulic system

- Type : Gear

- Number : One

10. Overall Dimensions, (mm) : 2090 (L) x 2450 (W) x 1540 (H)

11. Operational Mass, (kg) : 173

Field performance: Sl. No. Parameters Observation

1. Quantity of seed required in each tray, (g) : 80 to 100

2. Number of seedling trays per ha. : 172 to 182

3. Av. Depth of transplanting, (cm) : 4 to 5

4. Av. Spacing between rows, (cm) : 30

5. Av. Number of plants per hill : 5

6. Av. Spacing between hills : 18

7. Av. Number of hills per sq. m. : 24

8. Av. Speed of operation, (km/h) : 2.23 to 2.27

9. Av. Area covered, (ha/h) : 0.148 to 0.155

10. Av. Time required to cover 1 ha, (h) : 6.45 to 6.76

11. Av. Total transplanting losses in 1 m2, (%) : Nil to 1.67

12. Av. Fuel consumption - l/h : 0.91 to 0.93

- l/ha : 5.87 to 6.27

Page 96: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 87 of 98

Make & Model of machine : SHRACHI SF 15 DI Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-67/483, January, 2015

Applicant‟s Address : Bengal Tools Ltd. (Agro Division),

2, Jessore Road, Dum Dum, Kolkata - 700 028.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : Sifang, China

-Model : ZS1100

-Max. Power, (kW) : 10.8 @ 2052 rpm

-Rated Power, (kW) : 10.7 @ 2000 rpm

2. -Max. power of rotary shaft, (kW) : 9.9 @ 2050 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.5 @ 2048 rpm at L-3 gear

- Maximum drawbar power, (kW.) : 4.5 @ 2040 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, friction plate

- Make : Sifang, China

3.2 Chain case

- Drive type : Double roller, with 1.36 : 1 reduction ratio

3.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make : Sifang, China.

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.08 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2870 (L) x 970 (W) x 1240 (H)

7. Minimum ground clearance, (mm) : 200 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 492

Page 97: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 88 of 98

Make & Model of machine : Shrachi Sarpanch Power Tiller [Commercial (ICT)]

Test Report No. and Year of release : PT-68/484, January, 2015

Applicant‟s Address : Bengal Tools Ltd. (Agro Div.), 2 Jessore Road, Dum Dum, Kolkata - 700 028.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine

-Make : Cameo, China

-Model : Shrachi 12 DI

-Max. power, (kW) : 8.5 @ 2400 rpm

2. -Max. power of rotary, (kW) : 7.1 @ 2400 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.1 @ 2542 rpm at L-2 gear

- Maximum drawbar power, (kW.) : 5.2 @ 2535 rpm at H-1 gear

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2390 (L) x 840 (W) x 1280 (H)

6. Minimum ground clearance, (mm) : 185 (At axle portal housing drain plug)

7. Operational Mass with rotary tiller, (kg) : 416

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 5.3 to 7.3 10.0

3. Av. Puddling index, (%) : -- 72 to 75

4. Gear used : L-1 L-1

5. Av. speed of operation, (kmph) : 2.04 to 2.13 1.78 to 1.84

6. Av. wheel slip/travel reduction, (%) : -0.8 to -1.8 7.40 to 9.70

7. Av. depth of cut/depth of puddle, (cm) : 4.0 to 5.0 18.0 to 19.0

8. Av. working width, (cm) : 58.0 to 59.0 --

9. Av. Area covered, (ha/h) : 0.0799 to 0.0831 --

10. Av. Fuel consumption - l/h : 1.25 to 1.29 1.30 to 1.35

- l/ha : 15.24 to 16.00 --

Page 98: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 89 of 98

Make & Model of machine : John Deere 3419RT Paddy Rotary Tiller

Declared use: Puddling only (Tractor Mounted) (Commercial)

Test Report No. and Year of release : IMP-304/485, January, 2015

Applicant‟s Address : M/s. John Deere India Pvt. Ltd., Off Pune-A. Nagar Road, Sanaswadi, Pune, Maharashtra - 412 208.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Recommended Tractor Size, (hp) (apa) : 45 minimum

2. Rotor

-Type of rotor axle : Tubular section with flanges welded over it for mounting of blades.

-No. of flanges : 09 Nos.

- Type of flange : Circular

2.1 Rotor blades

-Type : C-Type

-No. of blades : 54

- Speed of rotor shaft corresponding to 540 rpm of PTO shaft, (rpm)

: 215

3. Depth control mechanism

3.1 Skid

-Type : Curved shape

- No. of skids : 02

3.2 Adjusting Rack

- Type : MS flat with 04 nos of holes

- Range of depth adjustment, (mm) : 5 to 80

4. Power transmission system

4.1 Primary reduction

-Type of drive : Bevel pinion, with 1.92 : 1 reduction ratio at gear box

4.2 Secondary reduction

- Type of drive : Gear drive, with 1.3 : 1 reduction ratio

5. Overall Dimensions, (mm) : 2020 (L) x 820 (W) x 1010 (H)

6. Operational Mass, (kg) : 344

Field performance:

Sl. No. Parameters Observation

Puddling Operation

1. Gear used : A-2

2. Type of soil : Light

3. Av. Speed of operation, (kmph) : 2.93 to 2.98

4. Av. Depth of standing water, (cm) : 10 to 11

5. Av. puddling Index, (%) : 83 to 85

6. Av. Depth of puddle, (cm) : 22 to 23

7. Av. Fuel consumption, (l/h) : 5.38 to 5.50

Page 99: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 90 of 98

Make & Model of machine : Bheem Pixel BM 200 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-69/486, January, 2015

Applicant‟s Address : Renaaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.), Palladam Taluk, Coimbatore - 641 658.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, 2 Stroke, Horizontal, Spark Ignition Engine

- Make : REN

- Power, (kW) (apa) : 1.4

2. Transmission system

2.1 Type of clutch : Centrifugal clutch (Internal expanding with friction lining)

2.2 Type of drive between crank shaft to rotary shaft

: Worm and Wheel Gear, with 40 : 1 reduction ratio

3. No. of rotor blades : 18

4. Transport wheel

-Material : Rubber coated fiber wheel

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1130 (L) x 645 (W) x 850 (H)

7. Operational Mass, (kg) : 23

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.57 to 1.72

2. Av. Depth of cut, (cm) : 4

3. Av. Width of cut, (cm) : 35 to 37

4. Av. Area covered, (ha/h) : 0.037 to 0.043

5. Av. Time required for 1 ha, (h) : 23.10 to 27.20

6. Av. Field efficiency, (%) : 66 to 68

7. Av. Weeding efficiency, (%) : 64 to 69

8. Av. Fuel consumption - l/h : 0.98 to 1.05

- l/ha : 22.90 to 27.51

Page 100: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 91 of 98

Make & Model of machine : Bheem Baby BM 170 Power Weeder (Commercial)

Test Report No. and Year of release : Machine-70/487, January, 2015

Applicant‟s Address : Renaaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.), Palladam Taluk, Coimbatore - 641 658.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, 2 Stroke, Horizontal, Spark Ignition Engine

- Make : REN

- Power, (kW) (apa) : 1.25

2. Transmission system

2.1 Type of clutch : Centrifugal clutch (Internal expanding with friction lining)

2.2 Type of drive between crank shaft to rotary shaft

: Worm and Wheel Gear, with 40 : 1 reduction ratio

3. No. of rotor blades : 08

4. Transport wheel

-Material : Rubber coated fiber wheel

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1070 (L) x 645 (W) x 995 (H)

7. Operational Mass, (kg) : 18

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.24 to 1.43

2. Av. Depth of cut, (cm) : 3

3. Av. Width of cut, (cm) : 17

4. Av. Area covered, (ha/h) : 0.015 to 0.016

5. Av. Time required for 1 ha, (h) : 61.30 to 68.50

6. Av. Field efficiency, (%) : 63 to 70

7. Av. Weeding efficiency, (%) : 59 to 65

8. Av. Fuel consumption - l/h : 0.82 to 0.90

- l/ha : 50.30 to 57.40

Page 101: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 92 of 98

Make & Model of machine : Vijay 1 WPW Wet Paddy Weeder (Commercial)

Test Report No. and Year of release : Machine-71/488, February, 2015

Applicant's Address : M/s. Southern Agro Engine (P) Ltd., 24 A, III Phase, Industrial Estate, Guindy, Chennai - 600 032.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Horizontal, Air cooled, 2-stroke, single cylinder, Spark Ignition engine

- Make : Vijay

- Power, (kW) (apa) : 1.5 @ 6000 rpm

2. Power Transmission system

2.1 Type of drive gear : Worm gear, with 34:1 reduction ratio

2.2 Type of clutch : Centrifugal clutch

3. Tyne wheel

-No. of tyne wheel : 2

-No. of tynes in a tyne wheel : 04

4. Starting method : Manual, Recoil starting system

5. Depth control Mechanism : Float is provided

6. Overall Dimensions (mm) : 1475 (L) x 750 (W) x 830 (H)

7. Operational Mass, (kg) : 13

Field performance:

Sl. No. Parameters Observation

1. Speed of operation, (km/h) : 1.86 to 1.93

2. Type of weeds : Sunterla

3. Width of cut, (cm) : 21

4. Area covered, (ha/h) : 0.023 to 0.027

5. Time required, (h/ha) : 37.04 to 43.50

6. Field efficiency, (%) : 59 to 66

7. Weeding efficiency, (%) : 60 to 65

8. Row to row spacing of crop, (cm) : 30

9. Fuel consumption - l/h : 0.92 to 0.98

- l/ha : 34.08 to 42.61

10. Recommended crop : Paddy

Page 102: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 93 of 98

Make & Model of machine : Bheem BM 33B Brush Cutter (Commercial)

Test Report No. and Year of release : Machine-72/489, February, 2015

Applicant‟s Address : Renaaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.), Palladam Taluk, Coimbatore - 641 658.

Technical Specification: Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, Single Cylinder, Horizontal, 2 stroke, Spark Ignition Engine

- Make : REN

- Power, (kW) (apa) : 0.9

2. Power Transmission system

2.1 Type of drive gear : Gear drive

3. Starting method : Manual, Recoil starting system

4. Overall Dimensions (mm)

4.1 Length (with triangular blade assembly), (mm)

: 1880

4.2 Length (with circular disc assembly), (mm)

: 1860

4.3 Height without crop deflector, (mm) : 385

4.4 Height with crop deflector, (mm) : 465

4.5 Width, (mm) : 700

5. Mass, (kg)

5.1 With circular disc and crop deflector : 8.1

5.2 With triangular blade and grass deflector

: 7.6

Field performance:

Sl. No. Parameters Observation

Bush cutting Weeds cutting

1. Speed of operation, (km/h) : --- 0.54 to 0.59

2. Average number of bush in 1 m2/No. of weeds in 1 m2

: 27 to 31 48 to 57

3. Average height of bush/weeds, (cm) : 103 to 125 64 to 111

4. Dia of Bush, (mm) : 15 to 16 ---

5. No of bush cut in one hour : 1635 to 1867 ---

6. Mass of bush cutted (kg/h) / Mass of weed cut, (kg/h)

: 117 to 131 89

7. Rate of work, (ha/h) : --- 0.021 to 0.026

8. Time required for one hectare, (h) : --- 38.46 to 47.62

9. Fuel consumption - l/h : 0.90 to 0.98 0.69 to 0.77

- l/ha : --- 27.08 to 36.67

Page 103: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 94 of 98

Make & Model of machine : Bheem BM 175 Paddy Weeder (Commercial)

Test Report No. and Year of release : Machine-73/490, February, 2015

Applicant's Address : Renaaissance Power Products Pvt. Ltd., SF. No. 92-A/2, Door No. 1/138, Karadivavipudur, Karadivavi (P.O.), Palladam Taluk, Coimbatore - 641 658.

Technical Specification: Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Horizontal, Air cooled, 2-stroke, single cylinder, Spark Ignition engine

- Make : REN

- Power, (kW) (apa) : 1.25

2. Power Transmission system

2.1 Type of drive gear : Worm gear, with 40:1 reduction ratio

2.2 Type of clutch : Centrifugal clutch

3. Tyne holder

-No. of tyne holder : 2

-No. of tynes in a tyne holder : 06

4. Starting method : Manual, Recoil starting system

5. Depth control Mechanism : Float is provided

6. Overall Dimensions (mm) : 1370 (L) x 850 (W) x 810 (H)

7. Operational Mass, (kg) : 20

Field performance: Sl. No. Parameters Observation

1. Speed of operation, (km/h) : 1.75 to 1.85

2. Type of weeds : Sunterla

3. Width of cut, (cm) : 40

4. Area covered, (ha/h) : 0.042 to 0.049

5. Time required, (h/ha) : 20.41 to 23.81

6. Field efficiency, (%) : 59 to 66

7. Weeding efficiency, (%) : 67 to 70

8. Row to row spacing of crop, (cm) : 30

9. Fuel consumption - l/h : 0.72 to 0.74

- l/ha : 14.44 to 17.69

10. Recommended crop : Paddy

Page 104: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 95 of 98

Make & Model of machine : Autoprint Terravate PTV55G Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-70/492, February, 2015

Applicant‟s Address : Autoprint Machinery Manufacturers Pvt. Ltd., "Kaanchan" #9, North Huzur Road, Coimbatore-641 018, Tamil Nadu.

Technical Specification:

The machine, named AUTOPRINT TERRAVATE PTV55G POWER TILLER (TILLING

TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The

INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO, THAT TOO, FOR DRY LAND OPERATION ONLY".

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, Air cooled, Inclined, Single Cylinder, Spark Ignition Engine.

-Make : Honda

-Model : GX 200

-Max. power, (kW) (apa) : 3.0 @ 3600 rpm

2. Starting method : Manual, Recoil starting

3. Overall Dimensions, (mm) : 1570 (L) x 570 (W) x 1140 (H)

4. Minimum ground clearance, (mm) : 100 (At axle portal housing drain plug)

5. Operational Mass with rotary tiller, (kg) : 72

Field performance:

Sl. No. Parameters Observation

1. Type of soil : Light

2. Av. soil moisture,(%) : 4.8 to 6.8

3. Gear used : Forward

4. Av. speed of operation, (kmph) : 1.20 to 1.45

5. Av. wheel slip, (%) : -2.60 to -1.60

6. Av. depth of cut, (cm) : 3 to 4

7. Av. working width, (cm) : 40 to 42

8. Av. Area covered, (ha/h) : 0.031 to 0.039

9. Av. Fuel consumption - l/h : 0.86 to 0.95

- l/ha : 22.10 to 30.40

Page 105: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 96 of 98

Make & Model of machine : Autoprint Terraturn PWT55G Power Weeder (Commercial)

Test Report No. and Year of release : Machine-74/493, February, 2015

Applicant‟s Address : Autoprint Machinery Manufacturers Pvt. Ltd., "Kaanchan" # 9, North Huzur Road, Coimbatore-641 018, Tamil Nadu.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

- Type : Air cooled, Single cylinder, Inclined, Spark Ignition Engine

- Make : Honda

- Power, (kW) (apa) : 3.0 @ 3600 rpm

2. Transmission system

2.1 Type of clutch : Cone clutch, centrifugal

2.2 Gear

2.2.1 Type of drive : Gear, with 2.5 : 1 reduction ratio

3. No. of rotor blades : 24

4. Transport wheel

-Material : Pneumatic, traction

-Number(s) : Two

5. Starting method : Manual, Recoil starting system

6. Overall Dimensions, (mm) : 1400 (L) x 925 (W) x 710/1130 (H)

7. Operational Mass, (kg)

- With transport wheel : 70

- With rotor axle : 75

Field performance:

Sl. No. Parameters Observation

1. Av. Speed of operation, (km/h) : 1.25 to 1.36

2. Av. Depth of cut, (cm) : 3 to 4

3. Av. Width of cut, (cm) : 73 to 74

4. Av. Area covered, (ha/h) : 0.060 to 0.063

5. Av. Time required for 1 ha, (h) : 15.20 to 16.58

6. Av. Field efficiency, (%) : 64 to 66

7. Av. Weeding efficiency, (%) : 60 to 62

8. Av. Fuel consumption - l/h : 0.97 to 1.04

- l/ha : 15.40 to 16.58

Page 106: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 97 of 98

Make & Model of machine : SUN DF-151 DI Power Tiller (Tilling Type) [Commercial (ICT)]

Test Report No. and Year of release : PT-71/494, February, 2015

Applicant‟s Address : Rogini Farm Equipments, 18, V C Ramalingam Street, Arcot, Vellore District - 632 503, Tamil Nadu.

Technical Specification:

The machine, named SUN DF-151 DI POWER TILLER (TILLING TYPE) is PROHIBITED by the firm “TO USE IN HAULAGE OPERATION”. The INTENDED USE of this Power Tiller is “TO OPERATE ONLY WITH THE TILLING DEVICE ATTACHED HERETO.

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Single Cylinder, Direct Injection, Compression Ignition Engine.

-Make : Rogini Farm Equipments

-Model : HS1100 BDI

-Max. power, (kW) : 11.0 @ 2040 rpm

2. -Max. power of rotary, (kW) : 9.2 @ 2042 rpm

3. Starting method : Manual, Hand cranking

4. Steering system : Steering clutch levers provided

5. Overall Dimensions, (mm) : 2920 (L) x 970 (W) x 1300 (H)

6. Minimum ground clearance, (mm) : 180 (At axle portal housing)

7. Operational Mass with rotary tiller, (kg) : 462

Field performance:

Sl. No. Parameters Observation

Rotavation Puddling

1. Type of soil : Light Light

2. Av. soil moisture,(%)/ Av. depth of standing water, (cm)

: 4.9 to 6.8 10.0

3. Av. Puddling index, (%) : -- 71 to 75

4. Gear used : L-2 L-1

5. Av. speed of operation, (kmph) : 2.59 to 2.73 1.56 to 1.59

6. Av. wheel slip/travel reduction, (%) : - 2.40 to 2.40 1.90 to 3.20

7. Av. depth of cut/depth of puddle, (cm) : 5.0 19.0

8. Av. working width, (cm) : 57.0 --

9. Av. Area covered, (ha/h) : 0.101 to 0.104 --

10. Av. Fuel consumption - l/h : 1.26 to 1.28 1.28 to 1.31

- l/ha : 12.10 to 12.67 --

Page 107: SALIENT FEATURES OF MACHINES TESTED - FMTTI(SR)srfmtti.dacnet.nic.in/Salient Features 2013-14.pdf ·  · 2016-05-11... M.S.Md Ali Moula, Senior Technician; C.V.Kiran, ... L-2 L-1

TESTED AT : S.R.F.M.T&T.I - ANANTAPUR Page 98 of 98

Make & Model of machine : SUN GN-151 DI Power Tiller (First Batch Test)

Test Report No. and Year of release : PT-72/495, February, 2015

Applicant‟s Address : Rogini Farm Equipments, 18, V C Ramalingam Street, Arcot, Vellore District - 632 503, Tamil Nadu.

Technical Specification:

Sl. No. Parameters Observation/Declaration

1. Engine

-Type : Four stroke, water cooled, Horizontal, Over Head Valve, Single Cylinder, Compression Ignition Engine

-Make : China

-Model : S 1100B DI

-Max. Power, (kW) : 10.5 @ 2040 rpm

-Rated Power, (kW) : 10.4 @ 2000 rpm

2. -Max. power of rotary shaft, (kW) : 9.0 @ 2039 rpm

- Maximum drawbar pull corresponding to 15% wheel slip, (kN)

: 3.6 @ 2088 rpm at L-3 gear

- Maximum drawbar power, (kW) : 4.5 @ 2065 rpm at H-1 gear

3. Transmission system

3.1 Clutch

- Type : Dry, friction

- Make : Shifeng, China

3.2 Chain case

- Drive type : Double roller, with 1.36 : 1 reduction ratio

3.3 Gear box

- Type : Combination of constant and sliding mesh gears

- Make : Shifeng, China

3.4 Rotary Transmission

- Drive type : Chain and sprocket, with 1.08 : 1 reduction ratio

4. Starting method : Manual, Hand cranking

5. Steering system : Steering clutch levers provided

6. Overall Dimensions, (mm) : 2800 (L) x 1035 (W) x 1275 (H)

7. Minimum ground clearance, (mm) : 195 (At axle portal housing)

8. Operational Mass with rotary tiller, (kg) : 476


Recommended