Date post: | 29-Mar-2015 |
Category: |
Documents |
Upload: | phillip-follen |
View: | 212 times |
Download: | 0 times |
SAMPLE SECTIONS OF 2DK TSHEL2DRAFT VERSION: FOR REVIEW AND DISCUSSION OF INSULATION AND INTERIOR PANELS
EXTERIOR WALL SECTION, WITH INTERIOR INSULATION AND MDF PANEL
Wall studs: 3-5/8” x 1-5/8” x 18gaExterior panel: SmartSide 7/16” engineered wood shear panel*Insulation and vapor barrier: P1000 EPS and radiant barrier panelsRigid interior panel: ¼” MDF FR (no formaldehyde) painted*Note: no grooves in SmartSide panels to be used in 2DK TShel2
EXTERIOR WALL SECTION, SHOWING INTERIOR MDF PANEL
Wall studs: 3-5/8” x 1-5/8” x 18gaInsulation and vapor barrier: P1000 EPS and radiant barrier panelsRigid interior panel: ¼” MDF FR (no formaldehyde) painted
LOWER FLOOR SECTION, SHOWING VINYL FLOORING
Floor joists: 6” x 1-5/8” x 18gaSub-floor: ½” Plywood FR JAS-stampedInsulation and vapor barrier: P1000 EPS and radiant barrier panelsRigid flooring surface: ¼” Plywood FR JAS-stampedFlooring: 1/16” vinyl (for kitchen and bathroom areas)
UPPER FLOOR SECTION, SHOWING CARPET TILES
Floor joists: 6” x 1-5/8” x 18gaSub-floor: ½” Plywood FR JAS-stampedFlooring: Carpet tiles (for living room and bedroom areas)1st floor ceiling (on bottom of section): ¼” MDF panel, painted