+ All Categories
Home > Documents > SAMSS - HENCON TRANSVERS HANDLER 4WD4WS...ENGINE TRAVEL MOTOR Deutz TCD2013 L04 2V Make Emission...

SAMSS - HENCON TRANSVERS HANDLER 4WD4WS...ENGINE TRAVEL MOTOR Deutz TCD2013 L04 2V Make Emission...

Date post: 02-Feb-2021
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
4
1
Transcript
  • 1

  • Mobile vehicle with 7.3 tons capacity crane for auxiliary works in underground mines. The vehicle is designed for transportation of mine trolleys, recovery of broken, damaged or stripped trackless units on a open cargo platform in underground mines. TransVers Handler 4WD4WS complies with international safety standards underground conditions. High capacity crane

    TransVers Handler 4WD4WS has a rigid frame and full-time four-wheel drive four-wheel steer system that allows to transport oversized cargo weighing up to 7 tons and ensures high manoeuvrability and cross-country ability.

    • closed operator cabin with dust air filter • two-stage engine air filter • Murphy engine oil-level sight glass instead of dipstick • quick-release couplings for filling of engine and hydraulic oil • autonomous fire suppression system

    Steering control modes: 1. Independent turning of front and rear wheels 2. Counter-steering of front and rear wheels 3. Crab steering

    HENCON TRANSVERS HANDLER 4WD4WS

    2

    mailto:[email protected]

  • ENGINE TRAVEL MOTOR

    Deutz TCD2013 L04 2V Make

    Emission class Linde

    Cargo platform

    EC Step III A and Tier 3

    Max power output

    126 KW @ 2300 rpm

    No. of cylinders

    4

    Swept volume

    4761 cm³

    Max torque

    670 Nm

    Fuel tank

    160 liters

    A closed circuit design, an ideal solution for a long and trouble free lifetime. Dual speed range hydrostatic drive

    between axles emulation. Each drive axle has its separate drive circuit : one hydraulic motor and one pump.

    Make Brevini

    Model

    HMV210

    AXLES

    Model

    Kessler D71

    Axle front

    Driving and steering axle, hydraulic suspension

    Axle rear

    Driving and steering axle, rigid mounted

    BRAKE SYSTEM

    Service brake

    Dual circuit, multi-disc wet type on both axles, hydraulically applied via proportional modulating valve

    Emergency brake

    Hand operated, spring applied hydraulic release

    STEERING

    Control panel with operator’s interface.

    4700x2000mm

    Floor level

    750 mm

    CRANE

    Model PALFINGER PK 19500T

    Capacity

    7000 kg

    Max loading moment

    18.5 ton-meter

    Boom reach

    10 m

    Crane turning angle

    420°

    Model BZ3-340

    Proportional steering control valve Orbitrol.

    TRAVEL PUMPS

    Make

    Linde

    Model

    HPV105

    Type

    Variable displacement axial piston pump

    Voltage

    24 VDC

    Batteries

    12 V, 105 A/h

    Alternator

    100 A

    Operator's cabin

    The machine has a comfortable three seat cabin with good visibility of the working area. The air ventilation system includes a heater and a windscreen demister function. The cabin is equipped with ROPS / FOPS. The machine has a multi-functional display that allows the operator to see all the machine informa- tion. The driver`s seat has a suspension, a safety belt and the seat has 8 parameter adjust- ments.

    TECHNICAL PARAMETERS

    ELECTRICAL EQUIPMENT

    HYDRAULIC PUMP DRIVE GEAR

    HYDROSTATIC DRIVE SYSTEM

    FUNCTIONAL PARAMETERS

  • DIMENSIONS AND MANOEUVRABILITY

    DIMENSIONS AND MANOEUVRABILITY

    Length 10050 mm Max speed 12 km/h

    Width 2000 mm Approach angle 14° Height 2700 mm Departure angle 16°

    Ground clearance 415 mm Break-over angle 7°

    Turning radius outer 7465 mm Operating weight 13000 kg Turning radius inner 3740 mm Capacity 7000 kg

    Wheelbase 5700 mm Tyres 9.00 x 20

    4

    2000

    20

    12

    2579

    380

    2

    18

    5

    9

    17

    313 15 162

    1587

    1885

    13

    11 4

    8

    1

    10110

    148

    35

    74

    100

    46

    3

    60

    2000

    38

    97

    27

    11

    mailto:[email protected]

Recommended