sane midge Kane˙idg Self-Drilling Screws1 SELF-DRILLING ......Kanebridge Self-Drilling Screws ** *...

sane midge

1 SELF-DRILLING SCREWS

-..;"1,-•

......."....- ,Ao40

,....----•"°"%atirl''' .,'•"".. , ...4440.0

Kane�idgeSELF-DRILLING SCREWS

Tel (800) 222-9221

Fax (201) 337-2301

[email protected]

www.kanebridge.com

2000+ Self-Drilling ScrewsIn Stock. Everyday.

C

M

Y

CM

MY

CY

CMY

K

SDS-FINAL.pdf 1 11/3/16 9:33 AM

admin

Typewritten Text

Table of Contents

FWAHL

SmallO

http://www.aboveboardelectronics.com/design-guide/order-form.php?comments=From+Kanebridge+Self-Drilling+Screws+Products2017

http://www.above-board-electronics.com/

KANEBRIDGE SELF-DRILLING SCREWS

NEW CATEGORIES

• Flat Phil w/Mach Scr Thread, St! Zinc • Hex Washer Unslot w/ #1 Point, SU Zinc • Modified Truss Six-Lobe, St! Zinc • Pan Six-Lobe, 410 SS • Round Washer w/Square Recess, SU Zinc • Serrated Unslot H/W w/Mach Scr Thrd, St! Zinc • Serrated Unslot H/W w/Mach Scr Thrd, 18-8 • Wafer Square-Phillips Recess, St! Z Yellow

Kanebridge gives all distributors

same-day access to the largest

inventory of Self-Drilling screws in the industry.

Our selection continues to grow because of the new product

requests and recommendations

you, our loyal customers, have

provided.

New sizes of Self-Drilling screws added in the last 12 months

9 All New Categories added since September 2015

Now more than ever, we are likely to have the drill screw with

the size, head style, material and

finish that your customer needs.

41 Stainless Steel Self-Drilling Product Lines

Self-Drilling ScrewsOver 1,800 Items for Same-Day Shipment

MIDWEST Service Center

1125 Gateway DriveElgin, IL 60123

Over 2,000 Varieties

This booklet lists our most current se-lection of Self-Drilling screws. This includes Steel and Stainless items in a variety of finishes, including Black Oxide.

For each item, we list the size, carton quantity and unit weight. That carton quantity is the minimum order amount for each item. There is no dollar mini-mum requirement to place an order with Kanebridge.

Here to Serve You

Our Customer Service Department can be contacted 7:30 AM - 8:00 PM Eastern, Monday thru Friday. Our e-commerce site, FasNet™, is available 24/7.

Kanebridge Corporation

T: (888) 222-9221 • F: (201) 337-2301 • E-Mail: [email protected] • www.kanebridge.com

Elgin IL • Bell CA • Oakland NJ

WESTERN Service Center

5316 Lindbergh LaneBell, CA 90201

EASTERN Service Center

153 Bauer DriveOakland, NJ 07436

KANEBRIDGE SELF-DRILLINGSCREWS

NEW CATEGORIES• Flat Phil w/Mach Scr Thread, Stl Zinc• Hex Washer Unslot w/ #1 Point, Stl Zinc• Modified Truss Six-Lobe, Stl Zinc• Pan Six-Lobe, 410 SS• Round Washer w/Square Recess, Stl Zinc• Serrated Unslot H/W w/Mach Scr Thrd, Stl Zinc• Serrated Unslot H/W w/Mach Scr Thrd, 18-8• Wafer Square-Phillips Recess, Stl Z Yellow

184New sizes of Self-Drilling screws added in the last 12 months

9All New Categories added since September 2015

41Stainless Steel Self-Drilling Product Lines

Kanebridge gives all distributors same-day access to the largest inventory of Self-Drilling screws in the industry.

Our selection continues to grow because of the new product requests and recommendations you, our loyal customers, have provided.

Now more than ever, we are likely to have the drill screw with the size, head style, material and finish that your customer needs.

Kanebridge Self-Drilling Screws

18-8 Stainless

410 Stainless

Steel Zinc

Steel Zinc Green

Steel Zinc Black

Steel Black Oxide

KANEBRIDGE CORPORATION New Jersey . Illinois . California

Kanebridge Self-Drilling Screws

18-8 Stainless 410 Stainless Steel Zinc Steel Zinc Green Steel Zinc Black Steel Black Oxide

Kanebridge Self-Drilling Screws ** * *Pages are extracted from our latest Kanebridge Source Book.

STAINLESS (all 112/113 pt. unless noted)

125

126

126

STEEL ZINC—Combination Recess 297

297

Phillips

Flat 410

Flat Undercut 410

Flat 18-8

Hex Washer, Spaced Thread

Pan, Spaced Thread

STEEL ZINC & CERAMIC GREEN—Phillips Recess Flat Undercut 18-8 126 Bugle, Spaced Thread, Zinc 297

Flat, #4 pt w/wings (MS thread) 410 126 Flat, Spaced Thread, Zinc 297

Flat U-cut (MS thread) 18-8 126 Flat Undercut, Zinc

Flat U-cut (MS thread) 410 127 Spaced Thread 298

Hex Washer 18-8 127 Machine Screw Thread 298

Modified Truss 410 127 Flat, Machine Screw Thread w/Wings, #4 Point, Zinc 298

Modified Truss 18-8 127 Flat U-Cut, Machine Screw Thread w/Wings, #3 Point, Znc 298

Oval 410 127 Flat, Spaced Thread, Green Ceramic 298

Oval 18-8 127 Hex Washer, Zinc 299

Oval U-cut 18-8 128 Modified Truss, Zinc 299

Pan 18-8 128 Oval, Zinc 299

Pan 18-8, Black Oxide 128 Oval Undercut, Zinc 299

Pan 410 128 Pan Spaced Thread, Zinc 299

Wafer, Spaced thread 18-8 129 Pan Machine Screw Thread, Zinc 300

Wafer, M/S thread 410 129 Serrated Pan, Spaced Thread, Zinc 300

Wafer, M/S thread 18-8 129 Special Pan Framing Screw, Zinc 300

Special Pan Framing Screw (Black Phos) 300

Slotted Round Washer, Zinc 301

Hex Washer 410 129 Trim Head, Zinc 301

Hex Washer 18-8 129 Wafer Spaced Thread, Zinc 301

Wafer Machine Screw Thread, Zinc 301

Ilislotted Ilex washer Wafer Spaced Thread w/Drill Pt., Ceramic Green 301

Spaced Thread 18-8 129 Wafer High-Low Thread w/Spade Pt., Ceramic Green 301

Spaced Thread, #2 & #3 pt 410 130 Wafer High-Low Thread w/Sharp Pt., Ceramic Green 301

Spaced Thread, #2 & #3 pt 410 Black Ox 130

Machine Thread, #2 & #3 pt 18-8 130 STEEL ZINC—Six-Lobe Recess Machine Thread, #2 pt 410 130 Flat 302

Machine Thread, #4 pt 410 130 Modified Truss 302

Machine Thread, #4 pt w/Wings 410 130 Pan 302

Machine Thread, #5 pt 410 130 Truss 302

Spaced Thread, #4 pt 410 130 Wafer Spaced Thread 302

Spaced Thread, #5 pt 410 131 Wafer, Machine Screw Thread 303

Serrated Hex Washer, #2 & 3 pt 18-8 131

Spaced Thread w/Neo EPDM Washer,

#2 & #3 pt 18-8 131

STEEL ZINC—Square Recess 303 Flat

#2 &#3 pt 410 131 Modified Truss 303

Pan 303

Sigobe Trim Head 304

Pan 18-8 131 Round Washer 304

Wafer 18-8 131 Wafer, Machine Screw Thread, #4 Point w/Wings 304

Flat 18-8 132

STEEL ZINC—Slotted Square Recess Hex Washer, Zinc 304

Flat 18-8 132 Serrated Hex Washer, Zinc

Flat 410 132 Spaced Thread-Standard Head 304

Pan 410 132 Spaced Thread-7/16" Across Flats 305

Pan 18-8 132 Machine Screw Thread 305

Hex Washer w/Neo-EPDM washers, Zinc 305

STAINLESS (all #2/#3 pt. unless noted)Phillips Flat 410 ........................................................................................................125 Flat Undercut 410 ..........................................................................................126 Flat 18-8 .......................................................................................................126 Flat Undercut 18-8 .........................................................................................126 Flat, #4 pt w/wings (MS thread) 410 ..............................................................126 Flat U-cut (MS thread) 18-8 ............................................................................126 Flat U-cut (MS thread) 410 ............................................................................. 127 Hex Washer 18-8 ........................................................................................... 127 Modified Truss 410 ........................................................................................ 127 Modified Truss 18-8........................................................................................ 127 Oval 410 ..................................................................................................... 127 Oval 18-8 ...................................................................................................... 127 Oval U-cut 18-8 .............................................................................................128 Pan 18-8 .......................................................................................................128 Pan 18-8, Black Oxide ...................................................................................128 Pan 410 ........................................................................................................128 Wafer, Spaced thread 18-8 ............................................................................129 Wafer, M/S thread 410 ................................................................................129 Wafer, M/S thread 18-8 .................................................................................129

Slotted Hex Washer 410 ...........................................................................................129 Hex Washer 18-8 ...........................................................................................129

Unslotted Hex washer Spaced Thread 18-8 .......................................................................................129 Spaced Thread, #2 & #3 pt 410 .....................................................................130 Spaced Thread, #2 & #3 pt 410 Black Ox .......................................................130 Machine Thread, #2 & #3 pt 18-8 ..................................................................130 Machine Thread, #2 pt 410 ...........................................................................130 Machine Thread, #4 pt 410 ...........................................................................130 Machine Thread, #4 pt w/Wings 410 ............................................................130 Machine Thread, #5 pt 410 ...........................................................................130 Spaced Thread, #4 pt 410 .............................................................................130 Spaced Thread, #5 pt 410 ............................................................................. 131 Serrated Hex Washer, #2 & 3 pt 18-8 ............................................................. 131 Spaced Thread w/Neo EPDM Washer, #2 & #3 pt 18-8 .......................................................................................... 131 #2 & #3 pt 410 .......................................................................................... 131

Six-Lobe Pan 18-8 ....................................................................................................... 131 Wafer 18-8 ................................................................................................... 131 Flat 18-8 .......................................................................................................132

Square Recess Flat 18-8 .......................................................................................................132 Flat 410 ........................................................................................................132 Pan 410 ........................................................................................................132 Pan 18-8 .......................................................................................................132

STEEL ZINC—Combination Recess Hex Washer, Spaced Thread ................................................................................297Pan, Spaced Thread .............................................................................................297

STEEL ZINC & CERAMIC GREEN—Phillips RecessBugle, Spaced Thread, Zinc ..................................................................................297Flat, Spaced Thread, Zinc .....................................................................................297Flat Undercut, Zinc Spaced Thread ..............................................................................................298 Machine Screw Thread ..................................................................................298Flat, Machine Screw Thread w/Wings, #4 Point, Zinc .............................................298Flat U-Cut, Machine Screw Thread w/Wings, #3 Point, Znc .........................................298Flat, Spaced Thread, Green Ceramic .....................................................................298Hex Washer, Zinc ................................................................................................299Modified Truss, Zinc .............................................................................................299Oval, Zinc ...........................................................................................................299Oval Undercut, Zinc .............................................................................................299Pan Spaced Thread, Zinc ......................................................................................299Pan Machine Screw Thread, Zinc ..........................................................................300Serrated Pan, Spaced Thread, Zinc .......................................................................300Special Pan Framing Screw, Zinc ..........................................................................300Special Pan Framing Screw (Black Phos) ................................................................300Round Washer, Zinc .............................................................................................301Trim Head, Zinc ...................................................................................................301Wafer Spaced Thread, Zinc ..................................................................................301Wafer Machine Screw Thread, Zinc .......................................................................301Wafer Spaced Thread w/Drill Pt., Ceramic Green ..................................................301Wafer High-Low Thread w/Spade Pt., Ceramic Green ............................................301Wafer High-Low Thread w/Sharp Pt., Ceramic Green .............................................301

STEEL ZINC—Six-Lobe RecessFlat ....................................................................................................................302Modified Truss .....................................................................................................302Pan ....................................................................................................................302Truss ...................................................................................................................302Wafer Spaced Thread ..........................................................................................302Wafer, Machine Screw Thread ..............................................................................303

STEEL ZINC—Square RecessFlat ....................................................................................................................303Modified Truss .....................................................................................................303Pan ....................................................................................................................303Trim Head............................................................................................................304Round Washer .....................................................................................................304Wafer, Machine Screw Thread, #4 Point w/Wings .................................................304

STEEL ZINC—SlottedHex Washer, Zinc ................................................................................................304Serrated Hex Washer, Zinc Spaced Thread--Standard Head ......................................................................304 Spaced Thread--7/16” Across Flats .................................................................305 Machine Screw Thread ..................................................................................305Hex Washer w/Neo-EPDM washers, Zinc ..............................................................305

Kanebridge Self-Drilling Screws— **Pages are extracted from our latest Kanebridge Source Book.**

STEEL ZINC-Unslotted Hex, Spaced Thread 305

Hex Washer, Spaced Thread

#3 points w/Undersized Head 305 #3 points w/High Head 305

Standard Head, #2 & 3 points 306 7/16" Across the Flats, #3 Point 306 #4 point 306

#5 point 306

Hex Washer, Machine Screw Thread

#2 & 3 points 307 #4 point 307

#4 point with Wings 307

#5 point 307

Serrated Hex Washer, Spaced Thread

#2 & #3 points 307 #4 point 308 #3 point w/High Head 308

Serrated Hex Washer, Machine Screw Thread

Standard Head, #2 & 3 points 308

7/16 Across the Flats, #3 point 308 Red Painted Head, 7/16" A.F., #2 point 308

Standard Head, #4 point w/Wings 308

Hex Washer w/Neo-EPDM washers, #2 & #3 Points 309

Hex Washer w/Neo-EPDM washers, #5 Point 309

STAINLESS BLACK OXIDE - 410 Unslotted Hex Washer 402

STEEL BLACK OXIDE Phillips Flat 402

Phillips Hex Washer 402

Phillips Oval 402

Phillips Pan 403

Phillips Modified Truss (Black Phos) 403

Slotted Hex Washer 403

Unslotted Hex Washer 403

Square Recess Pan 403

STEEL BLACK ZINC Phillips Flat, #2 point 422

Phillips Flat Undercut 422

Phillips Pan, #2 & #3 point 423

Hex Washer Unslotted, #2 & #3 point 423

Wafer Phillips w/ MS Threads, #3 point 423

STEEL GREEN ZINC Slotted Hex Washer 430

NEW SINCE AUG '16 Serrated Hex Washer w/#3 Point, 18-8 SS 430

Flat Six-Lobe w/#2 & 3 Points, 410 SS 430

Pan Six-Lobe w/#2 & 3 Points, 410 SS 430

Hex Washer Unslotted w/#1 Point, Steel Zinc 430

Wafer Square-Phillips Spaced Thread w/#3 Point, Steel Zinc Yellow 430

Wafer Phillips, Machine Screw Thread w/#3 Point, Steel Black Oxide 430 Oval Phillips w/Countersunk Finishing Washer SEMS, #2 Point Steel Zinc 430

e-mail: [email protected]

NEW: STEEL HIGH-CORROSION RESISTANT Bugle Phillips (Drywall) 433

Flange (Hex) w/Rubber Washer & #1 Stitch Pt 433

Flange (Hex) w/Rubber Washer & #3 Drill pt. 433

Flat Phillips w/#4 Drill Pt., Machine Screw thread 433 Flat Undercut Phillips w/#3 Drill Pt., Spaced thread 433

Hex Washer Phillips w?Standard Drill Pt., Spaced Thread 433

Hex Washer Slotted w/#3 Drill Pt., Spaced thread 433

Hex Washer Slotted w/#3 Drill Pt., Machine Screw thread 433

Hex Washer Unslotted w/#1 Stitch Pt., Spaced thread 434

Hex Washer Unslotted w/#2 Drill Pt., Spaced thread 434

Hex Washer Unslotted w/#4 Drill Pt., Spaced thread 434

Hex Washer Unslotted w/Standard Drill Pt., Spaced thread 434

Hex Washer Unslotted w/#2 Drill Pt., Machine Screw thread 434



Hex Washer Unslotted w/Standard Drill Pt., Machine Screw thread 435

Hex Washer Unslotted w/Neo-EPDM Washr & Standard Drill Pt., Spaced thread 435 Oval Phillips w/#3 Drill Pt., Spaced thread 435 Pan Phillips w/Standard Drill Pt., Spaced thread 435

Serrated Hex Washer Slotted (Self-Piercing) 435

Items marked with "•" have #2 point; all

others have #3 point

FLAT PHILLIPS SELF DRILLING SCREWS

Manufactured to ASME B18.6.3 & SAE 178 dimensions

Ctn Wght Part # Size Qty Lbs/M Part # Size O608KPF410 6-20X1/2 5,000 1.30 1010KPF410 .0610KPF410 6-20X5/8 5,000 1.83 1012KPF410 O612KPF410 6-20X3/4 5,000 2.38 1014KPF410 O616KPF410 6-20X1 5,000 2.65 1016KPF410 O620KPF410 6.20X11/4 4,000 3.66 1020KPF410 O624KPF410 6.20X112 3,500 3.97 1024KPF410 O628KPF410 6-20X1 3/4 1,500 4.10 1028KPF410 O632KPF410 6-20X2 1,000 4.70 1032KPF410

1040KPF410 O808KPF410 8-18X1/2 5,000 2.67 1048KPF410 .0810KPF410 8-18X518 5,000 3.01 O812KPF410 8-18X3/4 5,000 3.50 1216KPF410 O814KPF410 8-18X718 4,000 3.60 1220KPF410 O816KPF410 8-18X1 4,000 3.88 1224KPF410 O820KPF410 8-18X11/4 5,000 4.90 1232KPF410 O824KPF410 8-18X112 2,500 5.83 1240KPF410 O828KPF410 8-18X13/4 2,000 6.00 1248KPF410 O832KPF410 8-18X2 2,000 7.58 O840KPF410 8-18X212 2,000 9.43 1412KPF410 O848KPF410 8-18X3 800 10.20 1416KPF410

1420KPF410 1424KPF410 1432KPF410 1448KPF410

www.kanebridge.com 125

410 Stainless Steel

Ctn Wght Qty Lbs/M

10-16X5/8 4,000 4.27 10-16X3/4 4,000 4.74 10-16X7/8 3,000 5.00 10-16X1 3,000 5.19 10.16X11/4 3,000 6.85 10.16X112 2,000 7.71 10.16X13/4 1,500 8.90 10-16X2 1,000 12.60 10.16X212 750 12.63 10-16X3 500 1520

12-14X1 2,000 9.70 12-14X11/4 2,000 8S3 12-14X1 1/2 2,000 9.96 12-14X2 1,000 16.40 12-14X212 500 16.19 12-14X3 500 20.00

14-14X3/4 1,500 8.00 14-14X1 2,000 11.68 14-14X1 1/4 1,000 11.50 114-14X1 1/2 1,000 14.00 114-14X2 1,000 18.15 114-14X3 700 26.87

125e-mail: [email protected] www.kanebridge.com

STAINLESS Self-Drilling ScrewsReturn to Table of Contents

•0608KPF410 6-20X1/2 5,000 1.30•0610KPF410 6-20X5/8 5,000 1.83•0612KPF410 6-20X3/4 5,000 2.38•0616KPF410 6-20X1 5,000 2.65•0620KPF410 6-20X1 1/4 4,000 3.66•0624KPF410 6-20X1 1/2 3,500 3.97•0628KPF410 6-20X1 3/4 1,500 4.10•0632KPF410 6-20X2 1,000 4.70 •0808KPF410 8-18X1/2 5,000 2.67•0810KPF410 8-18X5/8 5,000 3.01•0812KPF410 8-18X3/4 5,000 3.50•0814KPF410 8-18X7/8 4,000 3.60•0816KPF410 8-18X1 4,000 3.88•0820KPF410 8-18X1 1/4 5,000 4.90•0824KPF410 8-18X1 1/2 2,500 5.83•0828KPF410 8-18X1 3/4 2,000 6.00•0832KPF410 8-18X2 2,000 7.58•0840KPF410 8-18X2 1/2 2,000 9.43•0848KPF410 8-18X3 800 10.20

1010KPF410 10-16X5/8 4,000 4.271012KPF410 10-16X3/4 4,000 4.741014KPF410 10-16X7/8 3,000 5.001016KPF410 10-16X1 3,000 5.191020KPF410 10-16X1 1/4 3,000 6.851024KPF410 10-16X1 1/2 2,000 7.711028KPF410 10-16X1 3/4 1,500 8.901032KPF410 10-16X2 1,000 12.601040KPF410 10-16X2 1/2 750 12.631048KPF410 10-16X3 500 15.20 1216KPF410 12-14X1 2,000 9.701220KPF410 12-14X1 1/4 2,000 8.831224KPF410 12-14X1 1/2 2,000 9.961232KPF410 12-14X2 1,000 16.401240KPF410 12-14X2 1/2 500 16.191248KPF410 12-14X3 500 20.00 1412KPF410 1/4-14X3/4 1,500 8.001416KPF410 1/4-14X1 2,000 11.681420KPF410 1/4-14X1 1/4 1,000 11.501424KPF410 1/4-14X1 1/2 1,000 14.001432KPF410 1/4-14X2 1,000 18.151448KPF410 1/4-14X3 700 26.87

STEEL ZINC—UnslottedHex, Spaced Thread ............................................................................................305Hex Washer, Spaced Thread #3 points w/Undersized Head .......................................................................305 #3 points w/High Head ..................................................................................305 Standard Head, #2 & 3 points ........................................................................306 7/16” Across the Flats, #3 Point .....................................................................306 #4 point ........................................................................................................306 #5 point ........................................................................................................306Hex Washer, Machine Screw Thread #2 & 3 points ................................................................................................307 #4 point ........................................................................................................307 #4 point with Wings .......................................................................................307 #5 point ........................................................................................................307Serrated Hex Washer, Spaced Thread #2 & #3 points ..............................................................................................307 #4 point ........................................................................................................308 #3 point w/High Head ...................................................................................308Serrated Hex Washer, Machine Screw Thread Standard Head, #2 & 3 points ........................................................................308 7/16 Across the Flats, #3 point .......................................................................308 Red Painted Head, 7/16” A.F., #2 point. .........................................................308 Standard Head, #4 point w/Wings .................................................................308Hex Washer w/Neo-EPDM washers, #2 & #3 Points ...............................................309Hex Washer w/Neo-EPDM washers, #5 Point ........................................................309

STAINLESS BLACK OXIDE - 410Unslotted Hex Washer .........................................................................................402

STEEL BLACK OXIDEPhillips Flat ..........................................................................................................402Phillips Hex Washer..............................................................................................402Phillips Oval ........................................................................................................402Phillips Pan ..........................................................................................................403Phillips Modified Truss (Black Phos) .......................................................................403Slotted Hex Washer .............................................................................................403Unslotted Hex Washer ..........................................................................................403Square Recess Pan ...............................................................................................403

STEEL BLACK ZINCPhillips Flat, #2 point ...........................................................................................422Phillips Flat Undercut ............................................................................................422Phillips Pan, #2 & #3 point ....................................................................................423 Hex Washer Unslotted, #2 & #3 point ...................................................................423 Wafer Phillips w/ MS Threads, #3 point ................................................................423

STEEL GREEN ZINCSlotted Hex Washer .............................................................................................430

NEW SINCE AUG ‘16Serrated Hex Washer w/#3 Point, 18-8 SS ............................................................430Flat Six-Lobe w/#2 & 3 Points, 410 SS ...................................................................430Pan Six-Lobe w/#2 & 3 Points, 410 SS ...................................................................430Hex Washer Unslotted w/#1 Point, Steel Zinc ........................................................430Wafer Square-Phillips Spaced Thread w/#3 Point, Steel Zinc Yellow ........................430Wafer Phillips, Machine Screw Thread w/#3 Point, Steel Black Oxide .....................430Oval Phillips w/Countersunk Finishing Washer SEMS, #2 Point Steel Zinc ................430

NEW: STEEL HIGH-CORROSION RESISTANT Bugle Phillips (Drywall) .........................................................................................433Flange (Hex) w/Rubber Washer & #1 Stitch Pt. ......................................................433Flange (Hex) w/Rubber Washer & #3 Drill pt. .......................................................433Flat Phillips w/#4 Drill Pt., Machine Screw thread ..................................................433Flat Undercut Phillips w/#3 Drill Pt., Spaced thread ................................................433Hex Washer Phillips w?Standard Drill Pt., Spaced Thread .......................................433Hex Washer Slotted w/#3 Drill Pt., Spaced thread .................................................433Hex Washer Slotted w/#3 Drill Pt., Machine Screw thread .....................................433Hex Washer Unslotted w/#1 Stitch Pt., Spaced thread ............................................434Hex Washer Unslotted w/#2 Drill Pt., Spaced thread .............................................434Hex Washer Unslotted w/#4 Drill Pt., Spaced thread .............................................434Hex Washer Unslotted w/Standard Drill Pt., Spaced thread ....................................434Hex Washer Unslotted w/#2 Drill Pt., Machine Screw thread ..................................434Hex Washer Unslotted w/#4 Drill Pt., Machine Screw thread ..................................434Hex Washer Unslotted w/#5 Drill Pt., Machine Screw thread ..................................435Hex Washer Unslotted w/Standard Drill Pt., Machine Screw thread ........................435Hex Washer Unslotted w/Neo-EPDM Washr & Standard Drill Pt., Spaced thread .....435Oval Phillips w/#3 Drill Pt., Spaced thread ............................................................435Pan Phillips w/Standard Drill Pt., Spaced thread ....................................................435

Serrated Hex Washer Slotted (Self-Piercing) ..........................................................435

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Ctn Qty

Wght Lbs/M

0606KPU410 6-20X3/8 5,000 1.08 0608KPU410 6-20X1/2 5,000 1.10

1212KPU410 12-14X3/4 2,500 5.04 1216KPU410 12-14X1 2,500 6.54 1224KPU410 12-14X1 1/2 1,500 9.80

1412KPU410 1/4-14X3/4 2,000 7.00 1416KPU410 114-14X1 1,500 8.74

.0808KPU410 8-18X1/2 5,000 2.60

.0812KPU410 8-18X3/4 5,000 4.05

.0816KPU410 8-18X1 3,500 5.05

18-8 Stainless Steel

Ctn Qty

Wght Lbs/M

18-8 Stainless Steel Items marked with "•"

have #2 point; all others have #3 point

126 Phone: 800-222-9221 Fax: 201-337-2301

I[SOURCE BOOK


others have #3 point 410 Stainless Steel

•1008KPU410 10-16X1/2 4,000 3.66 1012KPU410 10-16X3/4 7,000 4.74 1016KPU410 10-16X1 3,000 5.00 1020KPU410 10-16X1 1/4 2,000 6.26



Ctn Wght Ctn Wght Part # Size Qty Lbs/M Part # Size Qty Lbs/M

.0608KPF188 6-20X1/2 5,000 1.77 1216KPF188 12-14X1 3,000 9.70

.0610KPF188 6-20X5/8 5,000 1.81 1220KPF188 12-14X11/4 3,000 11.45

.0612KPF188 6-20X3/4 5,000 2.15 1224KPF188 12-14X112 2,000 13.20

.0614KPF188 6-20X7/8 5,000 2.50 1232KPF188 12-14X2 1,000 16.40

.0616KPF188 6-20X1 5,000 2.81 1240KPF188 12-14X212 500 17.00 1248KPF188 12-14X3 400 20.50

.0808KPF188 8-18X1/2 5,000 2.67

.0810KPF188 8-18X518 5,000 2.79 1412KPF188 1/4-14X3/4 3,000 7.29 0812KPF188 8-18X3/4 9,000 3.15 1416KPF188 114-14X1 2,000 11.68 .0814KPF188 8-18X7/8 6,000 3.60 1420KPF188 114-14X11/4 1,000 13.47 .0816KPF188 8-18X1 6,000 3.88 1424KPF188 114-14X1 1/2 1,000 15.47 .0820KPF188 8-18X11/4 5,000 5.01 1432KPF188 1/4-14X2 1,000 20.49 .0824KPF188 8-18X112 2,500 6.17 1436KPF188 1/4-14X21/4 1,000 31.40 .0832KPF188 8-18X2 2,000 9.22 1440KPF188 1/4-14X212 1,000 25.00 .0840KPF188 8-18X212 2,000 11.64 1448KPF188 1/4-14X3 700 30.00 .0848KPF188 8-18X3 1,000 14.70 1456KPF188 1/4-14X312 300 32.50

1464KPF188 1/4-14X4 250 36.75 1012KPF188 10-16X3/1 4,000 4.74 1472KPF188 1/4-14X412 250 42.50 1014KPF188 10-16X7A3 4,000 5.30 1480KPF188 1/4-14X5 250 47.60 1016KPF188 10-16X1 5,000 5.96 1020KPF188 10-16X1 1/4 4,000 6.85 1024KPF188 10-16X1 1/2 3,000 8.10 1032KPF188 10-16X2 2,000 12.60 1040KPF188 10.16X212 2,000 19.60 1048KPF188 10-16X3 1,000 17.00

Return to Table of Contents

Item marked with •" has #1 point.

Items marked with "•" have #2 point;

All others have #3 point


Ctn Wght Qty Lbs/M Part # Size Part # Size Part # Size

Ctn Wght Qty Lbs/M Part # Size

O608KPU188 6-20X1/2 5,000 1.37 O612KPU188 6-20X3/1 5,000 2.02

O808KPU188 8-18X12 5,000 2.60 O812KPU188 8-18X3/1 5,000 2.95 O816KPU188 8-18X1 3,500 5.05

O1008KPU188 10-16X1/2 4,000 3.66 1010KPU188 10-16X5/8 4,000 3.38 1012KPU188 10-16X3/4 3,500 4.74 1016KPU188 10-16X1 3,000 5.14 1020KPU188 10-16X1 1/4 2,000 6.38 1024KPU188 10-16X1 1/2 2,000 7.65

-1208KPU188 12-14X1/2 2,500 3.75 1212KPU188 12-14X3/4 2,500 5.36 1216KPU188 12-14X1 2,500 6.90 1224KPU188 12-14X1 1/2 1,500 10.00

1412KPU188 1/4-14X3/4 2,000 7.60 1416KPU188 114-14X1 1,500 9.68 1420KPU188 114-14X1 1/4 500 11.53 1424KPU188 114-14X112 400 13.90

410 Stainless Steel



1240KPFM441W 12-24X212 500 17.80

Ctn Wght Part # Size Qty Lbs/M

1110KPUMS188 10-32X518 1,250 4.40


•1210KPUMS188 12-24X518 1,000 4.80 1211KPUMS188 12-24X11/16 1,250 5.25 1212KPUMS188 12-24X3/4 1,000 5.65 1216KPUMS188 12-24X1 800 6.00

All items have #4 Point

10****130

T UNDERCUT PHILLIPS SELF DRILLING SCREWS




10**SiviD

FLAT UNDERCUT PHILLIPS SELF DRILLING SCREWS


#4 POINT FLAT PHILLIPS WITH WINGS SELF DRILLING SCREWS WITH

MACHINE SCREW THREADS

Manufactured to ASME B18.6.3

FLAT UNDERCUT PHILLIPS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS


126 Phone: 800-222-9221 Fax: 201-337-2301

SOURCE BOOK Return to Table of Contents

•0606KPU410 6-20X3/8 5,000 1.08•0608KPU410 6-20X1/2 5,000 1.10 •0808KPU410 8-18X1/2 5,000 2.60•0812KPU410 8-18X3/4 5,000 4.05•0816KPU410 8-18X1 3,500 5.05 •1008KPU410 10-16X1/2 4,000 3.661012KPU410 10-16X3/4 7,000 4.741016KPU410 10-16X1 3,000 5.001020KPU410 10-16X1 1/4 2,000 6.26

1212KPU410 12-14X3/4 2,500 5.041216KPU410 12-14X1 2,500 6.541224KPU410 12-14X1 1/2 1,500 9.80 1412KPU410 1/4-14X3/4 2,000 7.001416KPU410 1/4-14X1 1,500 8.74

•0608KPF188 6-20X1/2 5,000 1.77•0610KPF188 6-20X5/8 5,000 1.81•0612KPF188 6-20X3/4 5,000 2.15•0614KPF188 6-20X7/8 5,000 2.50•0616KPF188 6-20X1 5,000 2.81 •0808KPF188 8-18X1/2 5,000 2.67•0810KPF188 8-18X5/8 5,000 2.79•0812KPF188 8-18X3/4 9,000 3.15•0814KPF188 8-18X7/8 6,000 3.60•0816KPF188 8-18X1 6,000 3.88•0820KPF188 8-18X1 1/4 5,000 5.01•0824KPF188 8-18X1 1/2 2,500 6.17•0832KPF188 8-18X2 2,000 9.22•0840KPF188 8-18X2 1/2 2,000 11.64•0848KPF188 8-18X3 1,000 14.70 1012KPF188 10-16X3/4 4,000 4.741014KPF188 10-16X7/8 4,000 5.301016KPF188 10-16X1 5,000 5.961020KPF188 10-16X1 1/4 4,000 6.851024KPF188 10-16X1 1/2 3,000 8.101032KPF188 10-16X2 2,000 12.601040KPF188 10-16X2 1/2 2,000 19.601048KPF188 10-16X3 1,000 17.00

1216KPF188 12-14X1 3,000 9.701220KPF188 12-14X1 1/4 3,000 11.451224KPF188 12-14X1 1/2 2,000 13.201232KPF188 12-14X2 1,000 16.401240KPF188 12-14X2 1/2 500 17.001248KPF188 12-14X3 400 20.50 1412KPF188 1/4-14X3/4 3,000 7.291416KPF188 1/4-14X1 2,000 11.681420KPF188 1/4-14X1 1/4 1,000 13.471424KPF188 1/4-14X1 1/2 1,000 15.471432KPF188 1/4-14X2 1,000 20.491436KPF188 1/4-14X2 1/4 1,000 31.401440KPF188 1/4-14X2 1/2 1,000 25.001448KPF188 1/4-14X3 700 30.001456KPF188 1/4-14X3 1/2 300 32.501464KPF188 1/4-14X4 250 36.751472KPF188 1/4-14X4 1/2 250 42.501480KPF188 1/4-14X5 250 47.60

•0608KPU188 6-20X1/2 5,000 1.37•0612KPU188 6-20X3/4 5,000 2.02 •0808KPU188 8-18X1/2 5,000 2.60•0812KPU188 8-18X3/4 5,000 2.95•0816KPU188 8-18X1 3,500 5.05 •1008KPU188 10-16X1/2 4,000 3.661010KPU188 10-16X5/8 4,000 3.381012KPU188 10-16X3/4 3,500 4.741016KPU188 10-16X1 3,000 5.141020KPU188 10-16X1 1/4 2,000 6.381024KPU188 10-16X1 1/2 2,000 7.65

••1208KPU188 12-14X1/2 2,500 3.751212KPU188 12-14X3/4 2,500 5.361216KPU188 12-14X1 2,500 6.901224KPU188 12-14X1 1/2 1,500 10.00 1412KPU188 1/4-14X3/4 2,000 7.601416KPU188 1/4-14X1 1,500 9.681420KPU188 1/4-14X1 1/4 500 11.531424KPU188 1/4-14X1 1/2 400 13.90

1240KPFM441W 12-24X2 1/2 500 17.80

1110KPUMS188 10-32X5/8 1,250 4.40

•1210KPUMS188 12-24X5/8 1,000 4.801211KPUMS188 12-24X11/16 1,250 5.251212KPUMS188 12-24X3/4 1,000 5.651216KPUMS188 12-24X1 800 6.00

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Return to Table of Contents STAINLESS Self-Drilling Screws

410 Stainless Steel 18-8 Stainless Steel Items marked with "•"


All items have #2 point

410 Stainless Steel 18-8 Stainless Steel Items marked with "•"







others have #3 point 410 Stainless Steel 18-8 Stainless Steel

Ctn Wght Ctn Wght Qty Lbs/M Part # Size uty Lbs/M Part # Size


•1210KPUMS410 12-24X5/8 2,500 4.80 0606KPM188 6-20X318 4,000 2.11

1211KPUMS410 12-24X11/16 2,500 5.25 0608KPM188 6-20X12 4,000 1.97 1212KPUMS410 12-24X3/4 2,500 5.65

O808KPM188 8-18X12 2,500 4.03 O812KPM188 8-18X3/4 2,500 4.75 O816KPM188 8-18X1 2,000 5.60 O820KPM188 8-18X1 1/4 1,500 6.80 O824KPM188 8-18X1 1/2 1,000 7.29 O826KPM188 8-18X15/8 1,000 7.40

10-16X1/2 10-16X3/4 10-16X1

3,000 3,000 2,500

3.40 5.51 6.18

10-16X1 1/4 2,000 7.43 10-16X1 1/2 1,500 8.73 10-16X2 1,000 11.27

12-14X1/2 500 7.50 12-14X3/4 500 6.10 12-14X1 500 9.70 12-14X1 14 400 11.45 12-14X1 12 300 13.20

1016KPUMS410 10-24X1 3,000 5.30

Ctn Wght Qty Lbs/M

0808KPW188 8-18X1/2 5,000 3.14

Ctn Wght Qty Lbs/M

.0816KP0410 8-18X1 3,500 4.39

.0820KP0410 8-18X11/4 2,500 5.36

Ctn Wght Part # Size Qty Lbs/M 1020KP0410 10-16X1 1/4 2,000 7.22

Part # Size Part # Size Ctn Wght Qty Lbs/M Part # Size

Ctn Wght (Hy Lbs/M Part # Size

•1008KPM188 1012KPM188 1016KPM188 1020KPM188 1024KPM188 1032KPM188

•1208KPM188 1212KPM188 1216KPM188 1220KPM188 1224KPM188

111111111111111%

FLAT UNDERCUT PHILLIPS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Manufactured to ASME B18.6.3 & SAE J18 dimensions

MODIFIED TRUSS PHILLIPS SELF DRILLING SCREWS

Threads and Points Manufactured to SAE 118 dimensions

HEX WASHER PHILLIPS SELF DRILLING SCREWS

Manufactured to SAE 178 dimensions

OVAL PHILLIPS SELF DRILLING SCREWS

Manufactured to B18.6.3 & SAE J18 dimensions


Threads and Points Manufactured to SAE 178 dimensions


Manufactured to B18.6.3 & SAE 178 dimensions

Ctn Wght Ctn Wght Ctn Wght Ctn Wght Part # Size uty Lbs/M Part # Size oty Lbs/M Part # Size Qty Lbs/M Part # Size lily Lbs/M .0808KPM410 8-18X1/2 2,500 3.29 1012KPM410 10-16X3/4 3,000 4.65 .0608KP0188 6-20X1/2 5,000 1.70 0824KP0188 8-18X112 2,000 6.38 .0812KPM410 8-18X3/4 2,500 4.22 1016KPM410 10-16X1 2,500 5.80 .0610KP0188 6-20X518 5,000 2.07 0832KP0188 8-18X2 1,250 8.32 .0816KPM410 8-18X1 2,000 5.10 1020KPM410 10-16X11/4 2,000 7.38 .0612KP0188 6-20X3/4 5,000 2.37 .0820KPM410 8-18X11/4 1,500 6.02 1024KPM410 10-16X112 1,500 8.50 .0616KP0188 6-20X1 4,500 3.03 1012KP0188 10-16X3/4 3,500 4.71 .0824KPM410 8-18X112 1,000 6.90 .0620KP0188 6-20X11/4 4,000 3.75 1016KP0188 10-16X1 2,500 6.00 .0826KPM410 8-18X15/8 1,000 7.36 1216KPM410 12-14X1 500 7.30 1020KP0188 10-16X11/4 2,000 7.21 .0832KPM410 8-18X2 1,000 9.00 1220KPM410 12-14X11/4 400 9.20 .0808KP0188 8-18X1/2 5,000 2.60 .0840KPM410 8-18X212 1,000 11.00 1224KPM410 12-14X112 300 10.80 .0812KP0188 8-18X3/4 5,000 3.56 1416KP0188 114-14X1 1,500 11.20 .0848KPM410 8-18X3 750 13.00 .0816KP0188 8-18X1 3,500 4.66 .0856KPM410 8-18X312 500 14.75 .0820KP0188 8-18X11/4 2,500 5.38

STAINLESS Self-Drilling Screwe • Unslotted H/W Head w/ #4 & #5 Point-Machine Screw Thread, 410 SS-page 130

• Flat Undercut Phillips w/ #2 & #3 Point-Machine Screw Thread, 18-8 SS-page 126

• Serrated Unslotted H/W Head w/ #2 & #3 Point-Spaced Thread, 18-8 SS-page 131

e-mail: [email protected] www.kanebridge.com 127 127e-mail: [email protected] www.kanebridge.com


1016KPUMS410 10-24X1 3,000 5.30

•1210KPUMS410 12-24X5/8 2,500 4.801211KPUMS410 12-24X11/16 2,500 5.251212KPUMS410 12-24X3/4 2,500 5.65

0808KPW188 8-18X1/2 5,000 3.14

•0808KPM410 8-18X1/2 2,500 3.29•0812KPM410 8-18X3/4 2,500 4.22•0816KPM410 8-18X1 2,000 5.10•0820KPM410 8-18X1 1/4 1,500 6.02•0824KPM410 8-18X1 1/2 1,000 6.90•0826KPM410 8-18X1 5/8 1,000 7.36•0832KPM410 8-18X2 1,000 9.00•0840KPM410 8-18X2 1/2 1,000 11.00•0848KPM410 8-18X3 750 13.00•0856KPM410 8-18X3 1/2 500 14.75

1012KPM410 10-16X3/4 3,000 4.651016KPM410 10-16X1 2,500 5.801020KPM410 10-16X1 1/4 2,000 7.381024KPM410 10-16X1 1/2 1,500 8.50 1216KPM410 12-14X1 500 7.301220KPM410 12-14X1 1/4 400 9.201224KPM410 12-14X1 1/2 300 10.80

•0606KPM188 6-20X3/8 4,000 2.11•0608KPM188 6-20X1/2 4,000 1.97 •0808KPM188 8-18X1/2 2,500 4.03•0812KPM188 8-18X3/4 2,500 4.75•0816KPM188 8-18X1 2,000 5.60•0820KPM188 8-18X1 1/4 1,500 6.80•0824KPM188 8-18X1 1/2 1,000 7.29•0826KPM188 8-18X1 5/8 1,000 7.40

•1008KPM188 10-16X1/2 3,000 3.401012KPM188 10-16X3/4 3,000 5.511016KPM188 10-16X1 2,500 6.181020KPM188 10-16X1 1/4 2,000 7.431024KPM188 10-16X1 1/2 1,500 8.731032KPM188 10-16X2 1,000 11.27 •1208KPM188 12-14X1/2 500 7.501212KPM188 12-14X3/4 500 6.101216KPM188 12-14X1 500 9.701220KPM188 12-14X1 1/4 400 11.451224KPM188 12-14X1 1/2 300 13.20

•0816KPO410 8-18X1 3,500 4.39•0820KPO410 8-18X1 1/4 2,500 5.36

1020KPO410 10-16X1 1/4 2,000 7.22

•0608KPO188 6-20X1/2 5,000 1.70•0610KPO188 6-20X5/8 5,000 2.07•0612KPO188 6-20X3/4 5,000 2.37•0616KPO188 6-20X1 4,500 3.03•0620KPO188 6-20X1 1/4 4,000 3.75 •0808KPO188 8-18X1/2 5,000 2.60•0812KPO188 8-18X3/4 5,000 3.56•0816KPO188 8-18X1 3,500 4.66•0820KPO188 8-18X1 1/4 2,500 5.38

•0824KPO188 8-18X1 1/2 2,000 6.38•0832KPO188 8-18X2 1,250 8.32 1012KPO188 10-16X3/4 3,500 4.711016KPO188 10-16X1 2,500 6.001020KPO188 10-16X1 1/4 2,000 7.21 1416KPO188 1/4-14X1 1,500 11.20

STAINLESS Self-Drilling Screws:• Unslotted H/W Head w/ #4 & #5 Point—Machine Screw Thread, 410 SS—page 130

• Flat Undercut Phillips w/ #2 & #3 Point—Machine Screw Thread, 18-8 SS—page 126

• Serrated Unslotted H/W Head w/ #2 & #3 Point—Spaced Thread, 18-8 SS—page 131

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



1

18-8 Stainless Steel with Black Oxide finish

Items marked with "." have #2 point; all


18-8 Stainless Steel All items have #2 point

Ctn Wght Qty Lbs/M

1008KP0U188 10-16X1/2 5,000 3.60

Part # Size Ctn Wght Qty Lbs/M Part # Size

0808KPP188B 8-18X12

Ctn Wght Qty Lbs/M

5,000 3.10

Part # Size .0816KPP18813 8-18X1

Ctn Wght Illy Lbs/M

6,000 5.00

Part # Size

18-8 Stainless Steel Items marked with "."


410 Stainless Steel Items marked with "•"


OVAL UNDERCUT PHILLIPS SELF DRILLING SCREWS


PAN PHILLIPS SELF DRILLING SCREWS

Manufactured to B18.6.3 specifications





410 Stainless Steel

BUGLE PHILLIPS DRYWALL SCREWS

Fine Thread Self Drilling Point

• Flat Square Recess w/ #2 & #3 Point-

Spaced Thread, 18-8 SS-page 132

• Unslotted HMI Head w/ #2 & #3 Point-

Machine Screw Thread, 18-8 SS-page 130

I[SOURCE BOOK Return to Table of Contents

Ctn Wght Ctn Wght Ctn Wght Ctn Wght Part # Size Qty Lbs/M Part # Size Qty Lbs/M Part # Size

Qty Lbs/M Part # Size Qty Lbs/M

O406KPP188 4-24X3/8 10,000 1.06 1010KPP188 10-16X56 8,000 4.96 0606KPP410 6-20X3/8 10,000 1.75 .1008KPP410 10-16X1/2 4,000 4.57 O408KPP188 4-24X1/2 10,000 1.26 1012KPP188 10-16X34 4,000 5.51 0608KPP410 6-20X1/2 5,000 2.06 1010KPP410 10-16X5/8 4,000 4.94

1014KPP188 10-16X718 4,000 6.15 .0610KPP410 6-20X5/8 5,000 2.34 1012KPP410 10-16X3/4 4,000 5.51 O606KPP188 6-20X3/8 10,000 1.70 1016KPP188 10-16X1 5,000 6.93 0612KPP410 6-20X3/4 10,000 2.77 1016KPP410 10-16X1 5,000 6.93 O608KPP188 6-20X1/2 5,000 2.06 1020KPP188 10.16X11/4 4,000 7.96 0616KPP410 6-20X1 10,000 3.61 1020KPP410 10.16X11/4 4,000 7.96 O610KPP188 6-20X5/8 10,000 2.33 1024KPP188 10.16X112 3,000 9.42 0620KPP410 6.20X11/4 4,500 3.66 1024KPP410 10.16X112 3,000 9.42 O612KPP188 6-20X3/4 10,000 2.77 1028KPP188 10.16X13/4 3,000 11.00 0624KPP410 6.20X112 4,000 4.51 1032KPP410 10-16X2 2,000 11.58 O616KPP188 6-20X1 10,000 3.61 1032KPP188 10-16X2 2,000 12.56 1040KPP410 10.16X212 2,000 13.85 O620KPP188 6.20X11/4 4,500 3.97 1040KPP188 10.16X212 2,000 14.30 0806KPP410 8-18X318 10,000 2.64 O624KPP188 6.20X112 4,000 4.62 1048KPP188 10-16X3 500 17.13 0808KPP410 8-18X1/2 5,000 3.15 1212KPP410 12-14X3/4 3,000 7.50

500 22.10 .081102KK

Pp

Pp441100 8-18X5/8 5,000 3.61 1216KPP410 12-14X1 3,000 9.04 1064KPP188 10-16X4

O805KPP188 8-18X5/16 10,000 2.50 .08

8-18X3/4 5,000 4.00 1220KPP410 12-14X11/4 3,000 10.66 O806KPP188 8-18X3/8 10,000 2.96 •1208KPP188 12-14X1/2 5,000 7.50 0814KPP410 8-18X7/8 6,000 4.70 1224KPP410 12-14X112 2,000 12.20 O808KPP188 8-18X1/2 5,000 3.10 1212KPP188 12-14X34 5,000 8.10 0816KPP410 8-18X1 6,000 5.05 1232KPP410 12-14X2 1,000 15.40 O810KPP188 6-16X5/6 10,000 3.50 1216KPP188 12-14X1 3,000 9.70 0820KPP410 8-18X11/4 5,000 5.83 1240KPP410 12-14X212 500 18.70 O812KPP188 8-18X3/4 9,000 4.05 1220KPP188 12-14X11/4 3,000 11.45 0824KPP410 8-18X112 4,000 6.75 O814KPP188 8-18X7/8 6,000 4.53 1224KPP188 12-14X112 2,000 13.20 0832KPP410 8-18X2 2,000 8.63 1412KPP410 1/4-14X3/4 1,500 10.94 O816KPP188 8-18X1 6,000 5.05 1232KPP188 12-14X2 1,000 16.40 1416KPP410 114-14X1 1,000 13.06 O820KPP188 8-18X11/4 5,000 5.83 1240KPP188 12-14X212 500 19.20 1420KPP410 114-14X11/4 500 15.42 O824KPP188 8-18X112 4,000 7.29 1424KPP410 114-14X112 500 17.31 O828KPP188 8-18X13/4 3,000 8.10 1408KPP188 114-14X1/2 3,000 9.00 1432KPP410 114-14X2 500 21.67 O832KPP188 8-18X2 2,000 9.22 1412KPP188 1/4-14X3/4 3,000 11.50 1440KPP410 114-14X212 400 26.17 O840KPP188 8-18X212 2,000 11.26 1416KPP188 114-14X1 2,000 14.60 O848KPP188 8-18X3 1,000 12.76 1420KPP188 114-14X1 1/4 1,000 15.32

1424KPP188 114-14X1 1/2 1,000 18.10 •1006KPP188 10-16X318 9,000 4.00 1428KPP188 114-14X13/4 1,000 19.75 •1008KPP188 10-16X1/2 8,000 4.40 1432KPP188 114-14X2 1,000 21.40

1440KPP188 114-14X212 400 26.30 1448KPP188 1/4-14X3 700 31.30


0620KPG410 6.20X11/4 4,000 3.88


0626KPG410 6.20X15/8 2,500 4.92

128 Phone: 800-222-9221 Fax: 201-337-2301 128 Phone: 800-222-9221 Fax: 201-337-2301


1008KPOU188 10-16X1/2 5,000 3.60

•0406KPP188 4-24X3/8 10,000 1.06•0408KPP188 4-24X1/2 10,000 1.26 •0606KPP188 6-20X3/8 10,000 1.70•0608KPP188 6-20X1/2 5,000 2.06•0610KPP188 6-20X5/8 10,000 2.33•0612KPP188 6-20X3/4 10,000 2.77•0616KPP188 6-20X1 10,000 3.61•0620KPP188 6-20X1 1/4 4,500 3.97•0624KPP188 6-20X1 1/2 4,000 4.62 •0805KPP188 8-18X5/16 10,000 2.50•0806KPP188 8-18X3/8 10,000 2.96•0808KPP188 8-18X1/2 5,000 3.10•0810KPP188 8-18X5/8 10,000 3.50•0812KPP188 8-18X3/4 9,000 4.05•0814KPP188 8-18X7/8 6,000 4.53•0816KPP188 8-18X1 6,000 5.05•0820KPP188 8-18X1 1/4 5,000 5.83•0824KPP188 8-18X1 1/2 4,000 7.29•0828KPP188 8-18X1 3/4 3,000 8.10•0832KPP188 8-18X2 2,000 9.22•0840KPP188 8-18X2 1/2 2,000 11.26•0848KPP188 8-18X3 1,000 12.76 •1006KPP188 10-16X3/8 9,000 4.00•1008KPP188 10-16X1/2 8,000 4.40

1010KPP188 10-16X5/8 8,000 4.961012KPP188 10-16X3/4 4,000 5.511014KPP188 10-16X7/8 4,000 6.151016KPP188 10-16X1 5,000 6.931020KPP188 10-16X1 1/4 4,000 7.961024KPP188 10-16X1 1/2 3,000 9.421028KPP188 10-16X1 3/4 3,000 11.001032KPP188 10-16X2 2,000 12.561040KPP188 10-16X2 1/2 2,000 14.301048KPP188 10-16X3 500 17.131064KPP188 10-16X4 500 22.10 •1208KPP188 12-14X1/2 5,000 7.501212KPP188 12-14X3/4 5,000 8.101216KPP188 12-14X1 3,000 9.701220KPP188 12-14X1 1/4 3,000 11.451224KPP188 12-14X1 1/2 2,000 13.201232KPP188 12-14X2 1,000 16.401240KPP188 12-14X2 1/2 500 19.20 1408KPP188 1/4-14X1/2 3,000 9.001412KPP188 1/4-14X3/4 3,000 11.501416KPP188 1/4-14X1 2,000 14.601420KPP188 1/4-14X1 1/4 1,000 15.321424KPP188 1/4-14X1 1/2 1,000 18.101428KPP188 1/4-14X1 3/4 1,000 19.751432KPP188 1/4-14X2 1,000 21.401440KPP188 1/4-14X2 1/2 400 26.301448KPP188 1/4-14X3 700 31.30

•0808KPP188B 8-18X1/2 5,000 3.10 •0816KPP188B 8-18X1 6,000 5.00

•0606KPP410 6-20X3/8 10,000 1.75•0608KPP410 6-20X1/2 5,000 2.06•0610KPP410 6-20X5/8 5,000 2.34•0612KPP410 6-20X3/4 10,000 2.77•0616KPP410 6-20X1 10,000 3.61•0620KPP410 6-20X1 1/4 4,500 3.66•0624KPP410 6-20X1 1/2 4,000 4.51 •0806KPP410 8-18X3/8 10,000 2.64•0808KPP410 8-18X1/2 5,000 3.15•0810KPP410 8-18X5/8 5,000 3.61•0812KPP410 8-18X3/4 5,000 4.00•0814KPP410 8-18X7/8 6,000 4.70•0816KPP410 8-18X1 6,000 5.05•0820KPP410 8-18X1 1/4 5,000 5.83•0824KPP410 8-18X1 1/2 4,000 6.75•0832KPP410 8-18X2 2,000 8.63

•1008KPP410 10-16X1/2 4,000 4.571010KPP410 10-16X5/8 4,000 4.941012KPP410 10-16X3/4 4,000 5.511016KPP410 10-16X1 5,000 6.931020KPP410 10-16X1 1/4 4,000 7.961024KPP410 10-16X1 1/2 3,000 9.421032KPP410 10-16X2 2,000 11.581040KPP410 10-16X2 1/2 2,000 13.85 1212KPP410 12-14X3/4 3,000 7.501216KPP410 12-14X1 3,000 9.041220KPP410 12-14X1 1/4 3,000 10.661224KPP410 12-14X1 1/2 2,000 12.201232KPP410 12-14X2 1,000 15.401240KPP410 12-14X2 1/2 500 18.70 1412KPP410 1/4-14X3/4 1,500 10.941416KPP410 1/4-14X1 1,000 13.061420KPP410 1/4-14X1 1/4 500 15.421424KPP410 1/4-14X1 1/2 500 17.311432KPP410 1/4-14X2 500 21.671440KPP410 1/4-14X2 1/2 400 26.17

NEW STAINLESS Self-Drilling Screws:

• Flat Square Recess w/ #2 & #3 Point—

Spaced Thread, 18-8 SS—page 132

• Unslotted H/W Head w/ #2 & #3 Point—

Machine Screw Thread, 18-8 SS—page 130

0620KPG410 6-20X1 1/4 4,000 3.88 0626KPG410 6-20X1 5/8 2,500 4.92

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




Ctn Qty Part # Size


1416KWAFM188 114-20X1 1,000 12.49

410 Stainless Steel

18-8 Stainless Steel 18-8 Stainless Steel All items have #2 point

0812KWAF188 8-18X3/4 2,500 3.74

410 Stainless Steel 18-8 Stainless Steel Items marked with "."



Ctn Wght Qty Lbs/M

O808KSW188 8-18X1/2 5,000 3.30 O812KSW188 8-18X3/4 5,000 3.90

Ctn Wght Qty Lbs/M

•1008KSW188 10-16X1/2 4,000 4.80 1012KSW188 10-16X3/4 3,000 5.69

Part # Size Ctn Wght Qty Lbs/M Part # Size Part # Size

Ctn Wght Qty Part # Size



WAFER PHILLIPS SELF DRILLING SCREWS

Spaced Thread with #2 point


HEX WASHER SLOTTED SELF DRILLING SCREWS


Ctn Wght Part # Size Qty Lbs/M 1412KWAFM410 114-20X3/4 1,000 10.10

All items have #3 poin


1012KWAFM188 10-24X3/4 2,500 1016KWAFM188 10-24X1 2,500 1024KWAFM188 10-24X1 1/2 1,000



Part # Size Ctn Qty

Wght Lbs/M Part # Size

Ctn Qty

Wght Lbs/M

.0606KSW410 6-20X318 5,000 2.08 .1008KSW410 10-16X1/2 4,000 4.80 .1010KSW410 10-16X5/8 3,500 5.52

.0806KSW410 8-18X318 5,000 2.70 1012KSW410 10-16X3/4 3,000 5.86

.0808KSW410 8-18X1/2 5,000 3.15 1016KSW410 10-16X1 2,500 7.14

.0810KSW410 8-18X518 5,000 3.64 1020KSW410 10-16X11/4 2,000 8.28

.0812KSW410 8-18X3/4 5,000 4.09

.0816KSW410 8-18X1 4,000 5.08 1408KSW410 114-14X1/2 2,000 9.43 1412KSW410 114-14X3/4 1,500 11.34 1416KSW410 114-14X1 1,250 13.50


Part # Size Ctn Qty


Ctn (By

Wght Lbs/M

0412KW188 4-24X3/4 5,000 1.90 .14081W/188 114-14X1/2 3,000 10.24 •1410KW188 1/4-14X5/8 3,000 11.23

0606KW188 6-20X3/8 5,000 2.31 1412KW188 1/4-14X3/4 3,000 12.23 0608KW188 6-20X1/2 5,000 2.58 1416KW188 114-14X1 2,000 14.60 0610KW188 6-20X518 5,000 2.93 1420KW188 114-14X1 1/4 1,500 16.84 0612KW188 6-20X3/4 5,000 3.31 1424KW188 114-14X1 1/2 1,250 19.34 0616KW188 6-20X1 5,000 4.00 1428KW188 114-14X1 3/4 1,000 21.34

1432KW188 1/4-14X2 900 24.18 0806KW188 8-18X318 5,000 2.80 1440KW188 1/4-14X212 800 27.40 0808KW188 8-18X1/2 5,000 3.48 1448KW188 1/4-14X3 800 30.00 0810KW188 8-18X518 4,000 3.78 1456KW188 1/4-14X312 400 37.60 0812KW188 8-18X3/4 5,000 4.10 1464KW188 1/4-14X4 500 40.08 0816KW188 8-18X1 4,000 5.01 1480KW188 1/4-14X5 400 55.00 0824KW188 8-18X112 2,500 7.16 1496KW188 1/4-14X6 400 67.00 0828KW188 8-18X13/4 2,000 8.63 0832KW188 8-18X2 2,000 9.22 3112KW188 5/16-12X3/4 1,000 23.00

3116KW188 5/16-12X1 1,000 26.00 •1008KW188 10-16X1/2 4,000 5.06 3120KW188 5/16-12X11/4 350 31.33 1010KW188 10-16X5/8 6,000 5.33 3124KW188 5/16-12X112 600 32.20 1012KW188 10-16X3/4 4,000 6.66 3132KW188 5/16-12X2 300 43.25 1016KW188 10-16X1 3,000 8.05 3140KW188 5/16-12X212 200 44.50 1020KW188 10-16X1 1/4 2,000 8.37 3148KW188 5/16-12X3 200 59.35 1024KW188 10-16X1 1/2 3,000 10.12 3164KW188 5/16-12X4 150 74.65 1028KW188 10.16X13/4 3,000 10.70 1032KW188 10-16X2 1,000 12.72 S712KW188 318-12X34 750 37.50 1040KW188 10.16X212 1,000 14.30 3716KW188 318-12X1 750 41.40 1048KW188 10-16X3 500 17.60 3720KW188 318-12X11/4 300 49.05

3724KW188 318-12X112 300 55.85 •1208KW188 12-14X1/2 5,000 6.60 3732KW188 3/8-12X2 300 68.45 1210KW188 12-14X5/8 5,000 7.30 3740KW188 3/8-12X212 100 53.11 1212KW188 12-14X3/4 3,000 8.06 3748KW188 3/8-12X3 100 70.00 1216KW188 12-14X1 2,000 9.75 1220KW188 12-14X1 1/4 3,000 11.35 1224KW188 12-14X1 1/2 2,000 13.49 1228KW188 12-14X1 3/4 2,000 14.20 1232KW188 12-14X2 2,000 16.00 1240KW188 12-14X212 500 19.75 1248KW188 12-14X3 1,000 23.00 1264KW188 12-14X4 500 31.98

Same-Day Shipping on All Orders

Placed by 5:00 PM.


5.30 6.63 9.38


1016KWAFM410 10-24X1 2,500 1020KWAFM410 10-24X1 1/4 1,500 1024KWAFM410 10-24X1 1/2 1,000

Wght Lbs/M

6.50 7.75 9.28


Machine Screw Thread



Machine Screw Thread




HEX WASHER UNSLOTTED SELF DRILLING SCREWS




0812KWAF188 8-18X3/4 2,500 3.74

1016KWAFM410 10-24X1 2,500 6.501020KWAFM410 10-24X1 1/4 1,500 7.751024KWAFM410 10-24X1 1/2 1,000 9.28

1412KWAFM410 1/4-20X3/4 1,000 10.10

1012KWAFM188 10-24X3/4 2,500 5.301016KWAFM188 10-24X1 2,500 6.631024KWAFM188 10-24X1 1/2 1,000 9.38

1416KWAFM188 1/4-20X1 1,000 12.49

•0606KSW410 6-20X3/8 5,000 2.08 •0806KSW410 8-18X3/8 5,000 2.70•0808KSW410 8-18X1/2 5,000 3.15•0810KSW410 8-18X5/8 5,000 3.64•0812KSW410 8-18X3/4 5,000 4.09•0816KSW410 8-18X1 4,000 5.08

•1008KSW410 10-16X1/2 4,000 4.80•1010KSW410 10-16X5/8 3,500 5.521012KSW410 10-16X3/4 3,000 5.861016KSW410 10-16X1 2,500 7.141020KSW410 10-16X1 1/4 2,000 8.28 1408KSW410 1/4-14X1/2 2,000 9.431412KSW410 1/4-14X3/4 1,500 11.341416KSW410 1/4-14X1 1,250 13.50

•0808KSW188 8-18X1/2 5,000 3.30•0812KSW188 8-18X3/4 5,000 3.90

•1008KSW188 10-16X1/2 4,000 4.801012KSW188 10-16X3/4 3,000 5.69

•0412KW188 4-24X3/4 5,000 1.90 •0606KW188 6-20X3/8 5,000 2.31•0608KW188 6-20X1/2 5,000 2.58•0610KW188 6-20X5/8 5,000 2.93•0612KW188 6-20X3/4 5,000 3.31•0616KW188 6-20X1 5,000 4.00 •0806KW188 8-18X3/8 5,000 2.80•0808KW188 8-18X1/2 5,000 3.48•0810KW188 8-18X5/8 4,000 3.78•0812KW188 8-18X3/4 5,000 4.10•0816KW188 8-18X1 4,000 5.01•0824KW188 8-18X1 1/2 2,500 7.16•0828KW188 8-18X1 3/4 2,000 8.63•0832KW188 8-18X2 2,000 9.22 •1008KW188 10-16X1/2 4,000 5.061010KW188 10-16X5/8 6,000 5.331012KW188 10-16X3/4 4,000 6.661016KW188 10-16X1 3,000 8.051020KW188 10-16X1 1/4 2,000 8.371024KW188 10-16X1 1/2 3,000 10.121028KW188 10-16X1 3/4 3,000 10.701032KW188 10-16X2 1,000 12.721040KW188 10-16X2 1/2 1,000 14.301048KW188 10-16X3 500 17.60 •1208KW188 12-14X1/2 5,000 6.601210KW188 12-14X5/8 5,000 7.301212KW188 12-14X3/4 3,000 8.061216KW188 12-14X1 2,000 9.751220KW188 12-14X1 1/4 3,000 11.351224KW188 12-14X1 1/2 2,000 13.491228KW188 12-14X1 3/4 2,000 14.201232KW188 12-14X2 2,000 16.001240KW188 12-14X2 1/2 500 19.751248KW188 12-14X3 1,000 23.001264KW188 12-14X4 500 31.98

•1408KW188 1/4-14X1/2 3,000 10.24•1410KW188 1/4-14X5/8 3,000 11.231412KW188 1/4-14X3/4 3,000 12.231416KW188 1/4-14X1 2,000 14.601420KW188 1/4-14X1 1/4 1,500 16.841424KW188 1/4-14X1 1/2 1,250 19.341428KW188 1/4-14X1 3/4 1,000 21.341432KW188 1/4-14X2 900 24.181440KW188 1/4-14X2 1/2 800 27.401448KW188 1/4-14X3 800 30.001456KW188 1/4-14X3 1/2 400 37.601464KW188 1/4-14X4 500 40.081480KW188 1/4-14X5 400 55.001496KW188 1/4-14X6 400 67.00 3112KW188 5/16-12X3/4 1,000 23.003116KW188 5/16-12X1 1,000 26.003120KW188 5/16-12X1 1/4 350 31.333124KW188 5/16-12X1 1/2 600 32.203132KW188 5/16-12X2 300 43.253140KW188 5/16-12X2 1/2 200 44.503148KW188 5/16-12X3 200 59.353164KW188 5/16-12X4 150 74.65 •3712KW188 3/8-12X3/4 750 37.503716KW188 3/8-12X1 750 41.403720KW188 3/8-12X1 1/4 300 49.053724KW188 3/8-12X1 1/2 300 55.853732KW188 3/8-12X2 300 68.453740KW188 3/8-12X2 1/2 100 53.113748KW188 3/8-12X3 100 70.00

Same-Day Shipping on All Orders

Placed by 5:00 PM.

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Part # Size Ctn Wght Qty Lbs/M

1220KWMS410 12-24X1 1/4 3,000 11.90

Ctn Wght Qty Lbs/M

2,000 17.50

Part # Size 1232KWMS410 12-24X2

Ctn Wght Illy Lbs/M

900 16.80 Part # Size 1232KWMS5410 12-24X2

18-8 Stainless Steel 410 Stainless



Part # Size Ctn Qty


Ctn City

Wght Lbs/M

0606KW410 6-20X3/8 5,000 2.15 1212KW410 12-14X3/4 3,000 7.40 0608KW410 6-20X112 5,000 256 12141(W410 12-14X7/8 2,000 8.60 0610KW410 6-20X5/8 5,000 2.90 12161(W410 12-14X1 2,000 9.16 0612KW410 6-20X3/4 5,000 325 1220KW410 12-14X1 1/4 3,000 10.80 0616KW410 6-20X1 5,000 350 12241(W410 12-14X1 1/2 1,000 12.30

1232KW410 12-14X2 1,000 15.42 0808KW410 8-18X112 5,000 355 1240KW410 12-14X212 1,000 19.13 0810KW410 8-18X5/8 4,000 3.79 1248KW410 12-14X3 1,000 22.25 0812KW410 8-18X3/4 5,000 4.00 12641(W410 12-14X4 500 28.65 0816KW410 8-18X1 4,000 533 0820KW410 8-18X11/4 3,000 6.19 1412KW410 1/4-14X3/4 2,000 11.92 0824KW410 8-18X112 3,000 725 14141(W410 1/4-14X7/8 1,000 13.00 0832KW410 8-18X2 2,000 9.03 14161(W410 114-14X1 2,000 14.67 0840KW410 8-18X212 1,500 11.00 1420KW410 114-14X1 114 1,500 16.48 0848KW410 8-18X3 500 13.00 14241(W410 114-14X1 12 1,000 18.58

1428KW410 114-14X13/4 1,000 21.23 •1008KW410 10-16X112 4,000 5.03 1432KW410 1/4-14X2 1,000 23.13 1010KW410 10-16X5/8 4,000 551 1440KW410 1/4-10(2 12 800 27.47 1012KW410 10-16X3/4 4,000 556 1448KW410 1/4-14X3 800 31.73 10161(W410 10-16X1 3,000 722 14641(W410 111-14X4 500 40.65 1020KW410 10-16X1 114 2,000 8.60 1480KW410 114-14X5 400 50.60 1024KW410 10-16X1 12 3,000 9.65 14961(W410 114-14X6 400 5950 1032KW410 10-16X2 1,000 12.22 14112KW410 1A1-14X7 100 66.50 1040KW410 10-16X212 1,000 14.42 14128KW410 114-14X8 75 76.00 1048KW410 10-16X3 500 16.75 10641(W410 10-16X4 150 22.00 1080KW410 10-16X5 150 27.00



EW!


Ctn Wght Qty Lbs/M

1214KWMS4410 12-24X7/8 1,500 8.30

Ctn Wght Qty Lbs/M

121410NM4410W 12-24X7/8 2,000 9.00

Black Oxide over 410 Stainless Steel

410 Stainless Steel All items have #2 point




Part # Size Ctn Qty

Wght Lbs/M Part # Size Qty

Ctn Wght Lbs/M

.0808KW41013 8-18X112 5,000 3.20 1412KW41013 1/4-14X3/4 2,000 11.60

.0812KW41013 8-18X3/4 5,000 4.10 1416KW410B 114-14X1 2,000 13.60

•1008KW410B 10-16X112 4,000 4.70 1012KW410B 10-16X3/4 4,000 5.80

Ctn Wght Part # Size Qty Lbs/M 1220KWMS5410 12-24X1 1/4 1,000 10.90 1224KWMS5410 12-24X1 1/2 1,000 13.10


others have #3 point All items have #4 point

410 Stainless Steel

410 Stainless Steel

Ctn Wght Qty Lbs/M Part # Size Part # Size

Ctn Wght Qty Lbs/M Part # Size Part # Size 114110.--




HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads to ASME B18.6.3 dimensions Points to SAE 178 dimensions

#4 POINT HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads to ASME B18.6.3 410 Hardened Stainless Steel

HEX WASHER UNSLOTTED WITH WINGS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads to ASME B18.6.3 dimensions


Heads to ASME B18.6.3 410 Hardened Stainless Steel

#4 POINT HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH SELF TAPPING SCREW THREADS

410 Hardened Stainless Steel


Heads to ASME B18.6.3 dimensions Points to SAE 178 dimensions

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

•1008KWMS188 10-24X112 1,000 4.66 •1208KWMS188 12-24X112 1,000 6.06 1012KWMS188 10-24X3/4 1,000 6.43 1212KWMS188 12-24X3/4 1,000 8.06 10161(WMS188 10-24X1 1,000 8.05 1216KWMS188 12-24X1 1,000 9.75


1224KW4410 12-14X1 1/2 1,000 12.17 12161(W4410 12-14X1 2,000 9.00 1220KW4410 12-14X1 1/4 1,500 10.50



130 Phone: 800-222-9221

Fax: 201-337-2301 130 Phone: 800-222-9221 Fax: 201-337-2301


1220KWMS410 12-24X1 1/4 3,000 11.90 1232KWMS410 12-24X2 2,000 17.50

1214KWM4410W 12-24X7/8 2,000 9.00

•0606KW410 6-20X3/8 5,000 2.15•0608KW410 6-20X1/2 5,000 2.56•0610KW410 6-20X5/8 5,000 2.90•0612KW410 6-20X3/4 5,000 3.25•0616KW410 6-20X1 5,000 3.80 •0808KW410 8-18X1/2 5,000 3.55•0810KW410 8-18X5/8 4,000 3.79•0812KW410 8-18X3/4 5,000 4.00•0816KW410 8-18X1 4,000 5.33•0820KW410 8-18X1 1/4 3,000 6.19•0824KW410 8-18X1 1/2 3,000 7.25•0832KW410 8-18X2 2,000 9.03•0840KW410 8-18X2 1/2 1,500 11.00•0848KW410 8-18X3 500 13.00 •1008KW410 10-16X1/2 4,000 5.031010KW410 10-16X5/8 4,000 5.511012KW410 10-16X3/4 4,000 5.861016KW410 10-16X1 3,000 7.221020KW410 10-16X1 1/4 2,000 8.601024KW410 10-16X1 1/2 3,000 9.651032KW410 10-16X2 1,000 12.221040KW410 10-16X2 1/2 1,000 14.421048KW410 10-16X3 500 16.751064KW410 10-16X4 150 22.001080KW410 10-16X5 150 27.00

1212KW410 12-14X3/4 3,000 7.401214KW410 12-14X7/8 2,000 8.601216KW410 12-14X1 2,000 9.161220KW410 12-14X1 1/4 3,000 10.801224KW410 12-14X1 1/2 1,000 12.301232KW410 12-14X2 1,000 15.421240KW410 12-14X2 1/2 1,000 19.131248KW410 12-14X3 1,000 22.251264KW410 12-14X4 500 28.65 1412KW410 1/4-14X3/4 2,000 11.921414KW410 1/4-14X7/8 1,000 13.001416KW410 1/4-14X1 2,000 14.671420KW410 1/4-14X1 1/4 1,500 16.481424KW410 1/4-14X1 1/2 1,000 18.581428KW410 1/4-14X1 3/4 1,000 21.231432KW410 1/4-14X2 1,000 23.131440KW410 1/4-14X2 1/2 800 27.471448KW410 1/4-14X3 800 31.731464KW410 1/4-14X4 500 40.651480KW410 1/4-14X5 400 50.601496KW410 1/4-14X6 400 59.5014112KW410 1/4-14X7 100 66.5014128KW410 1/4-14X8 75 76.00

•1008KWMS188 10-24X1/2 1,000 4.661012KWMS188 10-24X3/4 1,000 6.431016KWMS188 10-24X1 1,000 8.05

•1208KWMS188 12-24X1/2 1,000 6.061212KWMS188 12-24X3/4 1,000 8.061216KWMS188 12-24X1 1,000 9.75

1214KWMS4410 12-24X7/8 1,500 8.30

1220KWMS5410 12-24X1 1/4 1,000 10.901224KWMS5410 12-24X1 1/2 1,000 13.10

1232KWMS5410 12-24X2 900 16.80

•0808KW410B 8-18X1/2 5,000 3.20•0812KW410B 8-18X3/4 5,000 4.10

•1008KW410B 10-16X1/2 4,000 4.701012KW410B 10-16X3/4 4,000 5.80

1412KW410B 1/4-14X3/4 2,000 11.601416KW410B 1/4-14X1 2,000 13.60

1216KW4410 12-14X1 2,000 9.001220KW4410 12-14X1 1/4 1,500 10.50

1224KW4410 12-14X1 1/2 1,000 12.17

NEW!

NEW!

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO





1220KW5410 12-14X1 1/4 1,500 10.43 1224KW5410 12-14X1 1/2 1,000 12.15 1232KW5410 12-14X2 1,000 15.53

Ctn Qty


Ctn Qty

Wght Lbs/M

.0608KWS188 6-20X12 2,000 2.63 1412KWS188 1/4-14X3/4 600 12.67 1416KWS188 114-14X1 500 14.83

.0808KWS188 8-18X12 2,000 3.48 1420KWS188 114-14X1 1/4 500 17.33 1424KWS188 114-14X1 1/2 400 24.18

•1008KWS188 10-16X1/2 1,500 4.60 ¶141607KWS188 114X1 1,000 17.17

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0808KWN410 8-18X1/2 2,000 4.90 1212KWN410 12-14X3/4 1,250 10.08

.0812KWN410 8-18X3/4 2,000 6.30 1216KWN410 12-14X1 1,000 11.70

.0816KWN410 8-18X1 2,000 6.70 1220KWN410 12-14X1 1/4 1,000 12.88 1224KWN410 12-14X1 1/2 1,000 14.83

1008KWN410 10-16X1/2 2,000 6.50 1232KWN410 12-14X2 800 18.25 1012KWN410 10-16X3/4 1,500 7.58 1248KWN410 12-14X3 500 25.00 1016KWN410 10-16X1 1,500 8.75 1024KWN410 10-16X1 1/2 1,000 11.25 1412KWN410 1/4-14X3/4 1,000 14.25 1032KWN410 10-16X2 1,000 14.25 1416KWN410 114-14X1 800 16.83 1048KWN410 10-16X3 500 19.25 1420KWN410 114-14X1 1/4 750 18.75

1424KWN410 114-14X1 1/2 700 21.00 1448KWN410 1/4-14X3 400 35.25



Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0808K1P188 8-18X12 5,000 3.15 1008KTP188 10-16X1/2 4,000 450

.0812K1P188 8-18X314 4,500 4.20 1010KTP188 10-16X5/8 4,000 5.00

.0816KTP188 8-18X1 2,000 5.00 1012KTP188 10-16X3/4 3,500 533

.0820K1P188 8-18X1 1/4 1,500 5.80 1016KTP188 10-16X1 2,500 6.63

.0824K1P188 8-18X1 1/2 1,000 6.70 1020KTP188 10-16X1 114 1,000 8.00

.0832K1P188 8-18X2 800 8.50 1024KTP188 10.16X112 600 920 1032KTP188 10-16X2 400 11.70

Size Ctn Wght Qty Lbs/M

IItems marked with "✓' have #2 point; all others have #3 point

Items marked with '1" have 7/16" A.F. dimensions

1424KW5410 1432KW5410 1440KW5410 1448KW5410

114-14X112 500 18.60 1/4-14X2 400 23.10 1/4-14X212 400 27.50 1/4-14X3 300 31.70



410 Hardened Stainless Steel

H WASHER UNSLOTT'ED SELF DRILLING SCREWS WITH NEO-EPDM WASHER

Used to create a leak-proof seal Manufactured to B18.6.3 & SAE 178 dimensions

SERRATED HEX WASHER UNSLOTTED SELF DRILLING SCREWS

Manufactured to ASME B18.6.3 & SAE 178 dimensions 18-8 Stainless Steel

PAN SIX-LOBE SELF DRILLING SCREWS



Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

0808KWN188 8-18X1/2 2,000 5.28 1212KWN188 12-14X3/4 1,250 10.00 0816KWN188 8-18X1 1,000 7.28 1216KWN188 12-14X1 1,000 11.75

1012KWN188 10-16X3/4 1,500 7.89 1412KWN188 114-14X314 1,000 15.47 1016KWN188 10-16X1 1,500 9.13 1416KWN188 114-14X1 800 17.60


1024KWTF188 10-16X1 1/2 500 9.38 1012KWTF188 10-16X3/4 2,500 6.63 1016KWTF188 10-16X1 2,500 6.67




others have #3 point 410 Stainless Steel All items have #5 point 410 Stainless Steel


others have #3 point 18-8 Stainless Steel All items have #3 point

HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH NEO-EPDM WASHER

Used to create a leak-proof seal Manufactured to B18.6.3 & SAE 178 dimensions

WAFER SIX-LOBE SELF DRILLING SCREWS WITH SPACED THREADS

Manufactured to SAE 178 dimensions 18-8 Stainless Steel



•0808KWN410 8-18X1/2 2,000 4.90•0812KWN410 8-18X3/4 2,000 6.30•0816KWN410 8-18X1 2,000 6.70

1008KWN410 10-16X1/2 2,000 6.501012KWN410 10-16X3/4 1,500 7.581016KWN410 10-16X1 1,500 8.751024KWN410 10-16X1 1/2 1,000 11.251032KWN410 10-16X2 1,000 14.251048KWN410 10-16X3 500 19.25

1212KWN410 12-14X3/4 1,250 10.081216KWN410 12-14X1 1,000 11.701220KWN410 12-14X1 1/4 1,000 12.881224KWN410 12-14X1 1/2 1,000 14.831232KWN410 12-14X2 800 18.251248KWN410 12-14X3 500 25.00 1412KWN410 1/4-14X3/4 1,000 14.251416KWN410 1/4-14X1 800 16.831420KWN410 1/4-14X1 1/4 750 18.751424KWN410 1/4-14X1 1/2 700 21.001448KWN410 1/4-14X3 400 35.25

•0808KTP188 8-18X1/2 5,000 3.15•0812KTP188 8-18X3/4 4,500 4.20•0816KTP188 8-18X1 2,000 5.00•0820KTP188 8-18X1 1/4 1,500 5.80•0824KTP188 8-18X1 1/2 1,000 6.70•0832KTP188 8-18X2 800 8.50

1008KTP188 10-16X1/2 4,000 4.501010KTP188 10-16X5/8 4,000 5.001012KTP188 10-16X3/4 3,500 5.331016KTP188 10-16X1 2,500 6.631020KTP188 10-16X1 1/4 1,000 8.001024KTP188 10-16X1 1/2 600 9.201032KTP188 10-16X2 400 11.70

1012KWTF188 10-16X3/4 2,500 6.631016KWTF188 10-16X1 2,500 6.67

1024KWTF188 10-16X1 1/2 500 9.38

1220KW5410 12-14X1 1/4 1,500 10.431224KW5410 12-14X1 1/2 1,000 12.151232KW5410 12-14X2 1,000 15.53

1424KW5410 1/4-14X1 1/2 500 18.601432KW5410 1/4-14X2 400 23.101440KW5410 1/4-14X2 1/2 400 27.501448KW5410 1/4-14X3 300 31.70

•0608KWS188 6-20X1/2 2,000 2.63 •0808KWS188 8-18X1/2 2,000 3.48 •1008KWS188 10-16X1/2 1,500 4.60

1412KWS188 1/4-14X3/4 600 12.671416KWS188 1/4-14X1 500 14.831420KWS188 1/4-14X1 1/4 500 17.331424KWS188 1/4-14X1 1/2 400 24.18 ¶141607KWS188 1/4X1 1,000 17.17

•0808KWN188 8-18X1/2 2,000 5.28•0816KWN188 8-18X1 1,000 7.28

1012KWN188 10-16X3/4 1,500 7.891016KWN188 10-16X1 1,500 9.13

1212KWN188 12-14X3/4 1,250 10.001216KWN188 12-14X1 1,000 11.75 1412KWN188 1/4-14X3/4 1,000 15.471416KWN188 1/4-14X1 800 17.60

NEW!

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Part # Size Ctn Qty


Ctn Qty

Wght LbsIM

.0808KQF410 8-18X1/2 5,000 2.28 1012KQF410 10-16X3/4 3,500 3.85 0812KQF410 8-18X3/4 4,500 3.10 1016KQF410 10-16X1 2,500 5.14 .0816KQF410 8-18X1 3,000 3.94 1024KQF410 10.16X112 1,000 6.20 .0820KQF410 8-18X11/4 2,500 4.80 .0824KQF410 8-18X112 2,000 5.86 1416KQF410 114-14X1 1,000 9.92 .0832KQF410 8-18X2 1,000 7.58

410 Stainless Steel



PAN SQUARE RECESS SELF DRILLING SCREWS

Manufactured to SAE 178 dimensions Heads manufactured to ASME B18.6.3

Part # Size Ctn Illy


Ctn Qty

Wght Lbs/M

0606KQP410 6-20X3/8 3,000 1.59 1016KQP410 10-16X1 1,000 6.76 0608KQP410 6-20X1/2 3,000 1.91 1020KQP410 10-16X1 14 1,000 8.10 0612KQP410 6-20X3/4 2,500 2.77 1024KQP410 10-16X1 12 500 9.06 0614KQP410 6-20X7/8 2,500 3.00 1032KQP410 10-16X2 1,000 11.75 0616KQP410 6-20X1 2,500 3.61 1040KQP410 10-16X212 500 13.85

1048KQP410 10-16X3 500 16.75 0806KQP410 8-18X318 2,500 2.57 0808KQP410 8-18X1/2 5,000 3.00 1212KQP410 12-14X3/4 1,000 7.38 0810KQP410 8-18X518 2,000 3.50 1216KQP410 12-14X1 700 9.04 0812KQP410 8-18X3/4 1,500 3.92 1220KQP410 12-14X1 1/4 600 10.63 0816KQP410 8-18X1 1,000 4.88 1224KQP410 12-14X1 1/2 600 12.20 0820KQP410 8-18X11/4 2,500 5.85 1232KQP410 12-14X2 400 15.50 0824KQP410 8-18X112 2,000 6.77 0832KQP410 8-18X2 1,000 8.75 1412KQP410 114-14X3/4 1,000 10.50 0840KQP410 8-18X212 700 10.63 1416KQP410 114-14X1 1,000 13.28

1420KQP410 114-14X1 1/4 500 15.42 •1008KQP410 10-16X1/2 2,500 4.46 1424KQP410 114-14X1 1/2 400 17.31 1012KQP410 10-16X3/4 2,500 5.38 1432KQP410 114-14X2 300 21.50

Wght Lbs/M I Part # Size Qty

Ctn Wght Lbs/M

1012KQF188 10-16X3/4 2,000 4.08 1016KQF188 10-16X1 2,000 5.38 1020KQF188 10.16X11/4 1,000 6.85 1024KQF188 10.16X112 1,000 8.10 1028KQF188 10.16X13/4 1,000 9.47 1032KQF188 10-16X2 1,000 10.63 1040KQF188 10.16X212 1,000 19.60

1216KQF188 12-14X1 1,000 7.20 1220KQF188 12-14X11/4 1,000 8.65 1224KQF188 12-14X112 1,000 10.30

1420KQF188 114-14X11/4 500 12.03 1424KQF188 114-14X112 500 14.17

1.77 1.81 2.19

2.67 3.10 2.98 3.85 4.82 6.17 922

I[ SOURCE BOOK


18-8 Stainless Steel 410 Stainless Steel Items marked with "•"




FLAT SIX-LOBE SELF DRILLING SCREWS

Manufactured to B18.6.3 & SAE J18 dimensions

FLAT SQUARE RECESS SELF DRILLING SCREWS


Part # Size Ctn Qty

.0608K1F188

.0610K1F188

.0612K1F188

6-20X1/2 6-20X5/8 6-20X3/4

5,000 5,000 5,000

.0812K1F188 8-18X3/4 5,000

.0816K1F188 8-18X1 4,000

.0824K1F188 8-18X112 2,500

.0832K1F188 8-18X2 1,500

1012KTF188 10-16X3/4 4,000 1016KTF188 10-16X1 2,500 1020KTF188 10-16X1 14 2,000 1024KTF188 10-16X1 12 2,000 1032KTF188 10-16X2 1,500 1040KTF188 10.16X212 1,500

Ctn Part # Size

Qty .0608KQF188 6-20X1/2 3,000 .0610KQF188 6-20X5/8 3,000 .0612KQF188 6-20X3/4 2,000

.0808KQF188 8-18X1/2 2,500 0810KQF188 8-18X518 2,000 0812KQF188 8-18X3/4 2,000 0816KQF188 8-18X1 2,000 .0820KQF188 8-18X11/4 2,000 .0824KQF188 8-18X1 1/2 1,000 .0832KQF188 8-18X2 1,000

Wght Ctn Wght Lbs/M Part # Size Qty Lbs/M

1.61 1216KTF188 12-14X1 2,000 7.30 1.96 1224KTF188 12-14X1 1/2 1,000 10.50 224 1232KTF188 12-14X2 500 14.00

3.00 1412KTF188 114-14X3/4 1,500 8.00 420 1416KTF188 114-14X1 1,500 9.88 5.97 1420KTF188 114-14X11/4 1,000 11.75 7.83 1424KTF188 114-14X1 1/2 1,000 14.13

1432KTF188 114-14X2 500 18.67 425 1440KTF188 1/4-14X212 500 21.88 5.43 1448KTF188 1/4-14X3 350 27.75 6.63 8.00 3116KTF188 5/16-12X1 500 16.33

10.75 3124KTF188 5/16-12X112 300 23.67 13.17 3128KTF188 5/16-12X13/4 300 28.00

3132KTF188 5/16-12X2 300 31.75

18-8 Stainless Steel Items marked with "•"


T SQUARE RECESS SELF DRILLING SCREWS


132 Phone: 800-222-9221

Fax: 201-337-2301 132 Phone: 800-222-9221 Fax: 201-337-2301


•0608KQF188 6-20X1/2 3,000 1.77•0610KQF188 6-20X5/8 3,000 1.81•0612KQF188 6-20X3/4 2,000 2.19 •0808KQF188 8-18X1/2 2,500 2.67•0810KQF188 8-18X5/8 2,000 3.10•0812KQF188 8-18X3/4 2,000 2.98•0816KQF188 8-18X1 2,000 3.85•0820KQF188 8-18X1 1/4 2,000 4.82•0824KQF188 8-18X1 1/2 1,000 6.17•0832KQF188 8-18X2 1,000 9.22

1012KQF188 10-16X3/4 2,000 4.081016KQF188 10-16X1 2,000 5.381020KQF188 10-16X1 1/4 1,000 6.851024KQF188 10-16X1 1/2 1,000 8.101028KQF188 10-16X1 3/4 1,000 9.471032KQF188 10-16X2 1,000 10.631040KQF188 10-16X2 1/2 1,000 19.60 1216KQF188 12-14X1 1,000 7.201220KQF188 12-14X1 1/4 1,000 8.651224KQF188 12-14X1 1/2 1,000 10.30 1420KQF188 1/4-14X1 1/4 500 12.031424KQF188 1/4-14X1 1/2 500 14.17

•0808KQF410 8-18X1/2 5,000 2.28•0812KQF410 8-18X3/4 4,500 3.10•0816KQF410 8-18X1 3,000 3.94•0820KQF410 8-18X1 1/4 2,500 4.80•0824KQF410 8-18X1 1/2 2,000 5.86•0832KQF410 8-18X2 1,000 7.58

1012KQF410 10-16X3/4 3,500 3.851016KQF410 10-16X1 2,500 5.141024KQF410 10-16X1 1/2 1,000 6.20 1416KQF410 1/4-14X1 1,000 9.92

•0606KQP410 6-20X3/8 3,000 1.59•0608KQP410 6-20X1/2 3,000 1.91•0612KQP410 6-20X3/4 2,500 2.77•0614KQP410 6-20X7/8 2,500 3.00•0616KQP410 6-20X1 2,500 3.61 •0806KQP410 8-18X3/8 2,500 2.57•0808KQP410 8-18X1/2 5,000 3.00•0810KQP410 8-18X5/8 2,000 3.50•0812KQP410 8-18X3/4 1,500 3.92•0816KQP410 8-18X1 1,000 4.88•0820KQP410 8-18X1 1/4 2,500 5.85•0824KQP410 8-18X1 1/2 2,000 6.77•0832KQP410 8-18X2 1,000 8.75•0840KQP410 8-18X2 1/2 700 10.63 •1008KQP410 10-16X1/2 2,500 4.461012KQP410 10-16X3/4 2,500 5.38

1016KQP410 10-16X1 1,000 6.761020KQP410 10-16X1 1/4 1,000 8.101024KQP410 10-16X1 1/2 500 9.061032KQP410 10-16X2 1,000 11.751040KQP410 10-16X2 1/2 500 13.851048KQP410 10-16X3 500 16.75 1212KQP410 12-14X3/4 1,000 7.381216KQP410 12-14X1 700 9.041220KQP410 12-14X1 1/4 600 10.631224KQP410 12-14X1 1/2 600 12.201232KQP410 12-14X2 400 15.50 1412KQP410 1/4-14X3/4 1,000 10.501416KQP410 1/4-14X1 1,000 13.281420KQP410 1/4-14X1 1/4 500 15.421424KQP410 1/4-14X1 1/2 400 17.311432KQP410 1/4-14X2 300 21.50

•0608KTF188 6-20X1/2 5,000 1.61•0610KTF188 6-20X5/8 5,000 1.96•0612KTF188 6-20X3/4 5,000 2.24 •0812KTF188 8-18X3/4 5,000 3.00•0816KTF188 8-18X1 4,000 4.20•0824KTF188 8-18X1 1/2 2,500 5.97•0832KTF188 8-18X2 1,500 7.83 1012KTF188 10-16X3/4 4,000 4.251016KTF188 10-16X1 2,500 5.431020KTF188 10-16X1 1/4 2,000 6.631024KTF188 10-16X1 1/2 2,000 8.001032KTF188 10-16X2 1,500 10.751040KTF188 10-16X2 1/2 1,500 13.17

1216KTF188 12-14X1 2,000 7.301224KTF188 12-14X1 1/2 1,000 10.501232KTF188 12-14X2 500 14.00 1412KTF188 1/4-14X3/4 1,500 8.001416KTF188 1/4-14X1 1,500 9.881420KTF188 1/4-14X1 1/4 1,000 11.751424KTF188 1/4-14X1 1/2 1,000 14.131432KTF188 1/4-14X2 500 18.671440KTF188 1/4-14X2 1/2 500 21.881448KTF188 1/4-14X3 350 27.75 3116KTF188 5/16-12X1 500 16.333124KTF188 5/16-12X1 1/2 300 23.673128KTF188 5/16-12X1 3/4 300 28.003132KTF188 5/16-12X2 300 31.75

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




others have #3 point 18-8 Stainless Steel



others have #3 point 18-8 Stainless Steel



Manufactured to B18.6.3 & SAE J18 dimensions Manufactured to B18.6.3 & SAE 118 dimensions

Ctn Qty


Ctn Qty

Wght !la Part # Size

Ctn Qty


Ctn Qty

Wght Lbs/M

0606KQP188 6-20X3/8 5,000 1.75 •1008KQP188 10-16X12 4,000 4.55 1212KQP188 12-14X34 2,500 7.70 1412KQP188 1/4-14X3/4 1,500 11.50 0608KQP188 6-20X1/2 5,000 2.04 1010KQP188 10-16X513 3,000 4.93 1216KQP188 12-14X1 1,500 9.40 1416KQP188 114-14X1 1,000 13.75

1012KQP188 10-16X34 2,500 5.50 1220KQP188 12-14X1 1/4 600 10.83 1420KQP188 114-14X1 1/4 1,000 15.56 0806KQP188 8-18X3/8 5,000 2.67 1016KQP188 10-16X1 1,000 6.76 1224KQP188 12-14X1 1/2 500 12.53 1424KQP188 114-14X1 1/2 500 18.07 0808KQP188 8-18X1/2 5,000 3.08 1020KQP188 10-16X1 1/4 900 8.50 1232KQP188 12-14X2 400 25.50 1432KQP188 114-14X2 500 22.85 0810KQP188 8-18X5/8 1,500 3.56 1024KQP188 10-16X1 1/2 700 9.23 0812KQP188 8-18X3/4 1,500 4.00 1028KQP188 10.16X13/4 700 11.00 0816KQP188 8-18X1 1,300 5.00 1032KQP188 10-16X2 600 11.70 0820KQP188 8-18X1 1/4 1,250 5.94 1040KQP188 10.16X212 500 14.33 0824KQP188 8-18X1 1/2 1,000 6.93 1048KQP188 10-16X3 400 17.13 0832KQP188 8-18X2 800 9.00 0840KQP188 8-18X212 700 10.82

Check out our Newest Stainless Product Lines at www.kanebridge.com

METRIC MACHINE Screws

-JIS B-1111 Truss Phil, A2 SS

METRIC Nuts

- DIN 934 Hex, A4 SS

THREAD-CUTTING Screws

- Slotted Hex Washer Type-25, 18-8 SS

SELF-DRILLING Screws

- Flat Undercut Phillips, Machine Scr Thrd, 18-8 SS

- Pat Six-Lobe, Spaced Thrd, 410 SS

- Unslot HWH, Mach Scr Thread & #4 Pt., 410 SS

- Unslot HWH, Mach Scr Thread & #5 Pt., 410 SS

- Unslot HWH w/Serrations, Mach Scr Thrd, 18-8 SS

SELF-PIERCING Screws

- Unslot HWH, 410 SS

- Modified Truss Phillips, 18-8 SS

PLASTITE®-Alternative THREAD-ROLLING Screws

- Pan Six-Lobe, Black-Ox/Wax over 18-8 SS

- Truss Phillips, 18-8 SS/Wax

- Flat Phillips, 410 SS/Wax

TAPTITE®-Alternative THREAD-ROLLING Screws

- Truss Phillips, 18-8 SS/Wax

- Truss Phillips, 410 SS/Wax

MACHINE Screws

- Hex Washer Phillips, 18-8 SS

WASHERS

- EPDM Bonded, 18-8 SS



•0606KQP188 6-20X3/8 5,000 1.75•0608KQP188 6-20X1/2 5,000 2.04 •0806KQP188 8-18X3/8 5,000 2.67•0808KQP188 8-18X1/2 5,000 3.08•0810KQP188 8-18X5/8 1,500 3.56•0812KQP188 8-18X3/4 1,500 4.00•0816KQP188 8-18X1 1,300 5.00•0820KQP188 8-18X1 1/4 1,250 5.94•0824KQP188 8-18X1 1/2 1,000 6.93•0832KQP188 8-18X2 800 9.00•0840KQP188 8-18X2 1/2 700 10.82

•1008KQP188 10-16X1/2 4,000 4.551010KQP188 10-16X5/8 3,000 4.931012KQP188 10-16X3/4 2,500 5.501016KQP188 10-16X1 1,000 6.761020KQP188 10-16X1 1/4 900 8.501024KQP188 10-16X1 1/2 700 9.231028KQP188 10-16X1 3/4 700 11.001032KQP188 10-16X2 600 11.701040KQP188 10-16X2 1/2 500 14.331048KQP188 10-16X3 400 17.13

1212KQP188 12-14X3/4 2,500 7.701216KQP188 12-14X1 1,500 9.401220KQP188 12-14X1 1/4 600 10.831224KQP188 12-14X1 1/2 500 12.531232KQP188 12-14X2 400 25.50

1412KQP188 1/4-14X3/4 1,500 11.501416KQP188 1/4-14X1 1,000 13.751420KQP188 1/4-14X1 1/4 1,000 15.561424KQP188 1/4-14X1 1/2 500 18.071432KQP188 1/4-14X2 500 22.85

Check out our Newest Stainless Product Lines at www.kanebridge.comMETRIC MACHINE Screws - JIS B-1111 Truss Phil, A2 SSMETRIC Nuts - DIN 934 Hex, A4 SSTHREAD-CUTTING Screws - Slotted Hex Washer Type-25, 18-8 SSSELF-DRILLING Screws - Flat Undercut Phillips, Machine Scr Thrd, 18-8 SS - Pat Six-Lobe, Spaced Thrd, 410 SS - Unslot HWH, Mach Scr Thread & #4 Pt., 410 SS - Unslot HWH, Mach Scr Thread & #5 Pt., 410 SS - Unslot HWH w/Serrations, Mach Scr Thrd, 18-8 SSSELF-PIERCING Screws - Unslot HWH, 410 SS - Modified Truss Phillips, 18-8 SSPLASTITE®-Alternative THREAD-ROLLING Screws - Pan Six-Lobe, Black-Ox/Wax over 18-8 SS - Truss Phillips, 18-8 SS/Wax - Flat Phillips, 410 SS/WaxTAPTITE®-Alternative THREAD-ROLLING Screws - Truss Phillips, 18-8 SS/Wax - Truss Phillips, 410 SS/WaxMACHINE Screws - Hex Washer Phillips, 18-8 SSWASHERS - EPDM Bonded, 18-8 SS

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



KaPiebrid Same-Day Solutions for Self-Drilling Needs

HARD-TO-FIND ITEMS

Including #4 14 #5 Long Point sizes

HEAD STYLE & RECESS VARIETY

Such as Square Drive, Modified Truss, Phillips Hex Washer & more

VARIOUS MATERIALS & FINISHES

410 1418-8 Stainless; Steel Zinc & Steel Black Oxide

888-222-9221 • 800-222-9221 • 201-337-2300 (Fax): 201-337-2301

www.kanebridge.com

KanebridgeSame-Day Solutions for Self-Drilling Needs

888-222-9221 • 800-222-9221 • 201-337-2300(Fax): 201-337-2301

www.kanebridge.com

HARD-TO-FIND ITEMS

Including #4 & #5 Long Point sizes

HEAD STYLE & RECESS VARIETY

Such as Square Drive, Modified Truss,

Phillips Hex Washer & more

VARIOUS MATERIALS & FINISHES

410 & 18-8 Stainless; Steel Zinc &

Steel Black Oxide


others have #3 point Steel Zinc Plated

HEX WASHER COMBINATION SELF DRILLING SCREWS

Combination Phillips and Slotted Recess Manufactured to ASME B18.6.3 & SAE 178 specifications

Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40) Ctn Wght Ctn Wght

Part # Size Qty Lbs/M Part # Size Qty Lbs/M

.0806KCW 8-18X3/8 10,000 2.63 •1008KCW 10-16X1/2 7,000 4.64

.0808KCW 8-18X1/2 10,000 2.96 1012KCW 10-16X3/4 6,000 558

Steel Zinc Plated 01)1Yrr 11)Th Items marked with "•"


PAN COMBINATION SELF DRILLING SCREWS


Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

Part # Size Ctn Qty

Wght Lbs/M Part # Size Qty

Ctn Wght Lbs/M

.0606KCP 6-20X3/8 10,000 1.70 .0812KCP 8-18X3/4 9,000 4.05

.0608KCP 6-20X1/2 10,000 2.00 .0816KCP 8-18X1 6,000 4.81 .0820KCP 8-18X1 1/4 5,000 5.70

.0806KCP 8-18X3/8 10,000 253

.0808KCP 8-18X1/2 10,000 3.00 1012KCP 10-16X314 7,000 5.45

.0810KCP 8-18X5/8 10,000 3.50 1016KCP 10-16X1 5,000 6.64

Steel Zinc Plated Items marked with "•"


BUGLE PHILLIPS DRYWALL SCREWS

Fine Thread - Self Drilling Point Case Hardness: Rockwell C44 minimum

Part # Size Ctn Qty


Ctn city

Wght Lbs/M

.0612KPGZ 6-20X3/4 10,000 2.48 1020KPGZ 10.16X11/4 2,000 6.00

.0616KPGZ 6-20X1 10,000 3.10 1032KPGZ 1016X2 1,500 9.60

.0618KPGZ 6-20X1 1/8 10,000 3.43 1040KPGZ 10.16X212 1,000 12.20

.0620KPGZ 6.20X11/4 8,000 3.90 1056KPGZ 10.16X312 1,000 17.30

.0626KPGZ 6.20X15/8 5,000 4.80 1064KPGZ 10-16X4 500 19.70

.0630KPGZ 6.20X17/8 4,000 550 1096KPGZ 10-16X6 300 29.10

.0632KPGZ 6-20X2 4,000 5.80

.0812KPGZ 8-18X3/4 3,000 3.10

.0816KPGZ 8-18X1 3,000 4.10

.0820KPGZ 8-18X11/4 2,500 5.00

.0824KPGZ 8-18X112 2,000 5.80

.0826KPGZ 8-18X15/8 2,000 6.30

.0832KPGZ 8-18X2 2,000 8.00

.0838KPGZ 8-18X2 3/8 2,000 9.20

.0840KPGZ 8-18X212 2,000 9.83

.0848KPGZ 8-18X3 1,400 11.63

STEEL ZINC Self-Drilling Screws




Manufactured to ASME B18.6.3 & SAE 178 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)



Size 4-24)(3/8 4-24X1/2 4-24)(518 4-24)(3/4 4-24X1

6-20)13/8 6-20X7/16 6-20X1/2 6-20)(518 6-20)C3/4 6-20X7/8 6-20X1 6-20X1 1/4 6-20X1 1/2 6-20X15/8 6-20X2 6-20X21/4 6-20X212 6-20X3

7-19X7/16 7-19X1/2 7-19)C3/4

8-18X1/2 8-18X5/8 8-18)C3/4 8-18X7/8 8-18X1 8-18X1 1/4 8-18X1 1/2 8-18X15/8 8-18X1 3/4 8-18X1 7/8 8-18X2 8-18X21/4 8-18X212 8-18X2 3/4 8-18X3 8-18X312 8-18X4

10-16X1/2 10-16X5/8 10-16X3/4 10-16X1 10-16X1 114 10-16X1 12 10.16X1 314 10-16X2 10-16X2 10.16X212 10-16X3 10.16X312 10-16X4 10-16X412 10-16X5 10-16X6

Ctn Qty

10,000 10,000 10,000 10,000 10,000

10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000

7,000 5,000 5,000 3,000 2,000 1,500

10,000 10,000 10,000

10,000 10,000 10,000

9,000 8,000 7,000 5,000 4,000 4,000 3,000 3,000 2,000 1,500 1,250 1,250 1,000 1,000

10,000 8,000 8,000 6,000 5,000 4,000 3,000 3,000 1,000 1,500 1,000 1,000

750 750 500 500

Part # Size •1208KPF

12-14X1/2 1210KPF

12-14X5/8 1212KPF

12-14X3/4 1214KPF

12-14X7/8 1216KPF

12-14X1 1220KPF

12-14X1 1/4 1224KPF

12-14X1 1/2 1228KPF

12-14X1 3/4 1232KPF

12-14X2 1236KPF

12-14X21/4 1240KPF

12-14X212 1244KPF

12-14X2 3/4 1248KPF

12-14X3 1256KPF

12-14X312 1264KPF

12-14X4 1272KPF

12-14X412 1280KPF

12-14X5 1296KPF

12-14X6

1410KPF

1/4-14X3/4 1412KPF

1/4-14X3/4 1416KPF

114-14X1 1420KPF

114-14X1 1/4 1424KPF

114-14X1 1/2 1428KPF

114-14X1 3/4 1432KPF

1/4-14X2 1436KPF

1/4-14X21/4 1440KPF

1/4-14X212 1444KPF

1/4-14X2 3/4 1448KPF

1/4-14X3 1456KPF

1/4-14X312 1464KPF

1/4-14X4 1472KPF

1/4-14X412 1480KPF

1/4-14X5 1496KPF

1/4-14X6

3112KPF

5/16-12X3/4 3116KPF

5/16-12X1 3120KPF

5/16-12X1 1/4 3124KPF

5/16-12X1 1/2 3132KPF

5/16-12X2 3140KPF

5/16-12X212 3148KPF

5/16-12X3

3716KPF

318-12X1 3720KPF

318-12X1 1/4 3724KPF

318-12X1 1/2 3732KPF

3/8-12X2 3748KPF

3/8-12X3

Ctn Qty 5,000 4,000 4,000 4,000 4,000 3,000 2,000 1,500 1,000 1,000 1,000 1,000 1,000

750 600 500 500 400

3,000 3,000 3,000 2,000 2,000 1,500 1,000

800 1,000

800 700 600 500 500 500 250

1,000 1,000

750 600 600 600 500

750 600 600 600 400

Part # .0406KPF .0408KPF .0410KPF .0412KPF .0416KPF

(1606KPF (1607KPF (1608KPF .0610KPF .0612KPF .0614KPF .0616KPF .0620KPF .0624KPF .0626KPF .0632KPF .0636KPF .0640KPF .0648KPF

.0707KPF

.0708KPF

.0712KPF

.0808KPF

.0810KPF

.0812KPF

.0814KPF

.0816KPF

.0820KPF

.0824KPF

.0826KPF

.0828KPF

.0830KPF

.0832KPF

.0836KPF

.0840KPF

.0844KPF

.0848KPF

.0856KPF

.0864KPF

•1008KPF 1010KPF 1012KPF 1016KPF 1020KPF 1024KPF 1028KPF 1032KPF 1036KPF 1040KPF 1048KPF 1056KPF 1064KPF 1072KPF 1080KPF 1096KPF

Wght Lbs/M

1.06 126 1.15 137 1.92

1.46 150 1.77 2.00 238 320 3.60 3.66 532 6.03 6.73 6.08 6.70 830

155 1.71 2.70

2.67 3.01 350 3.45 3S8 5.01 730 826 830 9.00 922 8.90

11.64 14.00 14.70 17.40 18.90

3.66 427 4.74 5.96 6S5 8.10

1035 12.60 14.16 19.60 17.00 18.00 21.00 22.40 30.00 3025

Wght Lbs/M

6.76 7.80 8.10 8.30 9.70

11.45 13.20 12.33 16.40 15.00 20.37 19.50 20.42 23.00 28.00 30.63 55.00 40.50

9.00 9.78

11.68 13.47 15.47 19.00 20.49 31.40 25.00 28.00 30.00 41.40 38.00 41.00 50.00 54.00

12.55 15.70 19.33 28.00 36.00 38.25 56.00

24.75 30.33 36.00 47.83 71.75

www.kanebridge.com 297 297e-mail: [email protected] www.kanebridge.com

STEEL ZINC Self-Drilling ScrewsReturn to Table of Contents

•0806KCW 8-18X3/8 10,000 2.63•0808KCW 8-18X1/2 10,000 2.96

•1008KCW 10-16X1/2 7,000 4.641012KCW 10-16X3/4 6,000 5.58

•0606KCP 6-20X3/8 10,000 1.70•0608KCP 6-20X1/2 10,000 2.00 •0806KCP 8-18X3/8 10,000 2.53•0808KCP 8-18X1/2 10,000 3.00•0810KCP 8-18X5/8 10,000 3.50

•0812KCP 8-18X3/4 9,000 4.05•0816KCP 8-18X1 6,000 4.81•0820KCP 8-18X1 1/4 5,000 5.70 1012KCP 10-16X3/4 7,000 5.451016KCP 10-16X1 5,000 6.64

•0612KPGZ 6-20X3/4 10,000 2.48•0616KPGZ 6-20X1 10,000 3.10•0618KPGZ 6-20X1 1/8 10,000 3.43•0620KPGZ 6-20X1 1/4 8,000 3.90•0626KPGZ 6-20X1 5/8 5,000 4.80•0630KPGZ 6-20X1 7/8 4,000 5.50•0632KPGZ 6-20X2 4,000 5.80 •0812KPGZ 8-18X3/4 3,000 3.10•0816KPGZ 8-18X1 3,000 4.10•0820KPGZ 8-18X1 1/4 2,500 5.00•0824KPGZ 8-18X1 1/2 2,000 5.80•0826KPGZ 8-18X1 5/8 2,000 6.30•0832KPGZ 8-18X2 2,000 8.00•0838KPGZ 8-18X2 3/8 2,000 9.20•0840KPGZ 8-18X2 1/2 2,000 9.83•0848KPGZ 8-18X3 1,400 11.63

1020KPGZ 10-16X1 1/4 2,000 6.001032KPGZ 1016X2 1,500 9.601040KPGZ 10-16X2 1/2 1,000 12.201056KPGZ 10-16X3 1/2 1,000 17.301064KPGZ 10-16X4 500 19.701096KPGZ 10-16X6 300 29.10

•0406KPF 4-24X3/8 10,000 1.06•0408KPF 4-24X1/2 10,000 1.26•0410KPF 4-24X5/8 10,000 1.15•0412KPF 4-24X3/4 10,000 1.37•0416KPF 4-24X1 10,000 1.92 •0606KPF 6-20X3/8 10,000 1.46•0607KPF 6-20X7/16 10,000 1.50•0608KPF 6-20X1/2 10,000 1.77•0610KPF 6-20X5/8 10,000 2.00•0612KPF 6-20X3/4 10,000 2.38•0614KPF 6-20X7/8 10,000 3.20•0616KPF 6-20X1 10,000 3.60•0620KPF 6-20X1 1/4 10,000 3.66•0624KPF 6-20X1 1/2 7,000 5.32•0626KPF 6-20X1 5/8 5,000 6.03•0632KPF 6-20X2 5,000 6.73•0636KPF 6-20X2 1/4 3,000 6.08•0640KPF 6-20X2 1/2 2,000 6.70•0648KPF 6-20X3 1,500 8.30 •0707KPF 7-19X7/16 10,000 1.55•0708KPF 7-19X1/2 10,000 1.71•0712KPF 7-19X3/4 10,000 2.70 •0808KPF 8-18X1/2 10,000 2.67•0810KPF 8-18X5/8 10,000 3.01•0812KPF 8-18X3/4 10,000 3.50•0814KPF 8-18X7/8 9,000 3.45•0816KPF 8-18X1 8,000 3.88•0820KPF 8-18X1 1/4 7,000 5.01•0824KPF 8-18X1 1/2 5,000 7.30•0826KPF 8-18X1 5/8 4,000 8.26•0828KPF 8-18X1 3/4 4,000 8.30•0830KPF 8-18X1 7/8 3,000 9.00•0832KPF 8-18X2 3,000 9.22•0836KPF 8-18X2 1/4 2,000 8.90•0840KPF 8-18X2 1/2 1,500 11.64•0844KPF 8-18X2 3/4 1,250 14.00•0848KPF 8-18X3 1,250 14.70•0856KPF 8-18X3 1/2 1,000 17.40•0864KPF 8-18X4 1,000 18.90 •1008KPF 10-16X1/2 10,000 3.661010KPF 10-16X5/8 8,000 4.271012KPF 10-16X3/4 8,000 4.741016KPF 10-16X1 6,000 5.961020KPF 10-16X1 1/4 5,000 6.851024KPF 10-16X1 1/2 4,000 8.101028KPF 10-16X1 3/4 3,000 10.351032KPF 10-16X2 3,000 12.601036KPF 10-16X2 1/4 1,000 14.161040KPF 10-16X2 1/2 1,500 19.601048KPF 10-16X3 1,000 17.001056KPF 10-16X3 1/2 1,000 18.001064KPF 10-16X4 750 21.001072KPF 10-16X4 1/2 750 22.401080KPF 10-16X5 500 30.001096KPF 10-16X6 500 30.25

•1208KPF 12-14X1/2 5,000 6.761210KPF 12-14X5/8 4,000 7.801212KPF 12-14X3/4 4,000 8.101214KPF 12-14X7/8 4,000 8.301216KPF 12-14X1 4,000 9.701220KPF 12-14X1 1/4 3,000 11.451224KPF 12-14X1 1/2 2,000 13.201228KPF 12-14X1 3/4 1,500 12.331232KPF 12-14X2 1,000 16.401236KPF 12-14X2 1/4 1,000 15.001240KPF 12-14X2 1/2 1,000 20.371244KPF 12-14X2 3/4 1,000 19.501248KPF 12-14X3 1,000 20.421256KPF 12-14X3 1/2 750 23.001264KPF 12-14X4 600 28.001272KPF 12-14X4 1/2 500 30.631280KPF 12-14X5 500 55.001296KPF 12-14X6 400 40.50 1410KPF 1/4-14X3/4 3,000 9.001412KPF 1/4-14X3/4 3,000 9.781416KPF 1/4-14X1 3,000 11.681420KPF 1/4-14X1 1/4 2,000 13.471424KPF 1/4-14X1 1/2 2,000 15.471428KPF 1/4-14X1 3/4 1,500 19.001432KPF 1/4-14X2 1,000 20.491436KPF 1/4-14X2 1/4 800 31.401440KPF 1/4-14X2 1/2 1,000 25.001444KPF 1/4-14X2 3/4 800 28.001448KPF 1/4-14X3 700 30.001456KPF 1/4-14X3 1/2 600 41.401464KPF 1/4-14X4 500 38.001472KPF 1/4-14X4 1/2 500 41.001480KPF 1/4-14X5 500 50.001496KPF 1/4-14X6 250 54.00 3112KPF 5/16-12X3/4 1,000 12.553116KPF 5/16-12X1 1,000 15.703120KPF 5/16-12X1 1/4 750 19.333124KPF 5/16-12X1 1/2 600 28.003132KPF 5/16-12X2 600 36.003140KPF 5/16-12X2 1/2 600 38.253148KPF 5/16-12X3 500 56.00 3716KPF 3/8-12X1 750 24.753720KPF 3/8-12X1 1/4 600 30.333724KPF 3/8-12X1 1/2 600 36.003732KPF 3/8-12X2 600 47.833748KPF 3/8-12X3 400 71.75

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



1 All items have #4 point

11111112111W Steel Zinc Plated

Items marked "." have #2 point; all


FLAT PHILLIPS UNDERCUT SELF DRILLING SCREWS


Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0412KPU 4-24X3/4 9,000 1.37 •1208KPU 12-14X1/2 5,000 6.76

.0416KPU 4-24X1 9,000 1.82 1210KPU 12-14X518 5,000 4.40 1211KPU 12-14X11/16 5,000 4.70

.0606KPU 6-20X3/8 10,000 1.46 1212KPU 12-14X3/4 5,000 8.10

.0608KPU 6-20X1/2 10,000 1.77 1216KPU 12-14X1 5,000 9.70

.0610KPU 6-20X5/8 10,000 2.00 1220KPU 12-14X11/4 3,000 11.45

.0612KPU 6-20X3/4 10,000 2.38 1224KPU 12-14X112 3,000 1320

.0616KPU 6-20X1 10,000 2.50 1232KPU 12-14X2 1,000 1333

.0620KPU 6.20X11/4 10,000 3.66 1240KPU 12-14X212 1,000 16.60 0624KPU 6.20X112 7,000 4.04 1248KPU 12-14X3 1,000 20.00

.0806KPU 8-18X318 10,000 1.69 •1408KPU 114-14X1/2 4,000 9.12

.0808KPU 8-18X1/2 10,000 2.60 1412KPU 114-14X3/4 4,000 9.78

.0810KPU 8-18X518 10,000 3.01 1416KPU 114-14X1 3,000 11.60

.0812KPU 8-18X3/4 10,000 4.05 1420KPU 1/4-14X11/4 2,500 13.47

.0816KPU 8-18X1 7,000 5.05 1424KPU 1/4-14X112 2,000 1350

.0820KPU 8-18X11/4 5,000 5.01 1432KPU 114-14X2 1,000 17.88 0824KPU 8-18X112 5,000 5.58 1440KPU 1/4-14X212 1,000 2250 0828KPU 8-18X13/4 4,000 6.50 1448KPU 114-14X3 700 27.00 0832KPU 8-18X2 3,000 7.50 1464KPU 114-14X4 500 36.00 .0840KPU 8-18X212 1,500 9.38 0848KPU 8-18X3 1,250 11.38

•1006KPU 10-16X3/8 10,000 3.00 •1008KPU 10-16X1/2 10,000 3.66 1010KPU 10-16X5/8 8,000 4.27 1012KPU 10-16X3/4 7,000 4.74 1016KPU 10-16X1 6,000 5.96 1020KPU 10.16X11/4 4,000 6.85 1024KPU 10-16X1 1/2 1,000 8.10 1032KPU 10-16X2 1,000 12.60 1040KPU 10.16X212 1,000 12.40 1048KPU 10-16X3 1,000 14.92

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

1056KPFMS4W 10.24X312 700 17.80 1444KPFMS4W 1/4-20X23/4 800 28.00 1064KPFMS4W 10-24X4 600 20.80 1448KPFMS4W 114-20X3 700 3033

1452KPFMS4W 1/4-20X31/4 600 33.00 1232KPFMS4W 12-24X2 1,000 14.75 1456KPFMS4W 1/4-20X312 600 3555 1236KPFMS4W 12-24X21/4 1,000 16.70 1460KPFMS4W 1/4-20X33/4 500 38.17 1240KPFMS4W 12-24X212 1,000 18.60 1244KPFMS4W 12-24X2 3/4 1,000 20.50 1256KPFMS4W 12-24X312 500 23.30 1264KPFMS4W 12-24X4 500 26.70


Ctn Wght Qty Lbs/M

1240KPUMSW 12-24X212 1,000 18.50

Part # Size


others have #3 point Steel Green

Ceramic Coated 0011%*10


Steel Zinc Plated Steel Zinc Plated

Steel Zinc Plated

# 4 POINT FLAT PHILLIPS WITH WINGS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads to ASME B18.6.3 / Screws hardened to SAE 178 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

FLAT PHILLIPS UNDERCUT WITH WINGS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads Manufactured to ASME B18.6.3 dimensions Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

FLAT PHILLIPS UNDERCUT SELF DRILLING SCREWS WITH MACHINE SCREW THREADS


FLAT PHILLIPS WITH WINGS SELF DRILLING SCREWS

Heads to ASME B18.6.3 with Nibs / Screws hardened to SAE 118 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)


Ctn Wght Ctn Wght Part # Size qty Lbs/M Part # Size Qty Lbs/M

.0808KPUMS 832X1/2 10,000 1.90 1212KPUMS 12-24X3/4 5,000 520

.0812KPUMS 832X3/4 10,000 2.90 1216KPUMS 12-24X1 5,000 7.06

.0816KPUMS 832X1 7,000 3.90 1220KPUMS 12-24X11/4 3,000 8.92 1224KPUMS 12-24X1 12 3,000 11.17

1008KPUMS 10-24X1/2 4,000 2.92 1232KPUMS 12-24X2 1,000 15.00 1012KPUMS 10-24X3/4 4,000 3.93 1016KPUMS 10-24X1 3,000 5.58 1412KPUMS 114-20X3/4 4,000 7.80

1416KPUMS 1M-20X1 3,000 10.00 1110KPUMS 10-32X5/8 8,000 3.53 1424KPUMS 1/4-20X112 1,500 13.00

1432KPUMS 114-20X2 1,000 17.80 •1208KPUMS 12-24X1/2 5,000 3.80 1440KPUMS 1/4-20X212 1,000 2250 1210KPUMS 12-24X5/8 5,000 4.45 1448KPUMS 114-20X3 900 27.00 1211KPUMS 12-24X11/16 5,000 4.90

Part # 0820KPFRC 0826KPFRC

Size 8-18X1 1/4 8-18X15/8

Ctn Qty 1,000 1,000

Wght Lbs/M

5.00 6.33


0836KPFRC 8-18X2 1/4 1,000 8.67

Specifications for all Self-Drilling Screws-

Check the Online Kanebridge Fastener Reference Guide

298 Phone: 800-222-9221

Fax: 201-337-2301 298 Phone: 800-222-9221 Fax: 201-337-2301

SOURCE BOOKReturn to Table of Contents

Specifications for all Self-Drilling Screws—

Check the Online Kanebridge Fastener Reference Guide

1240KPUMSW 12-24X2 1/2 1,000 18.50

0820KPFRC 8-18X1 1/4 1,000 5.000826KPFRC 8-18X1 5/8 1,000 6.33

0836KPFRC 8-18X2 1/4 1,000 8.67

•0412KPU 4-24X3/4 9,000 1.37•0416KPU 4-24X1 9,000 1.82 •0606KPU 6-20X3/8 10,000 1.46•0608KPU 6-20X1/2 10,000 1.77•0610KPU 6-20X5/8 10,000 2.00•0612KPU 6-20X3/4 10,000 2.38•0616KPU 6-20X1 10,000 2.50•0620KPU 6-20X1 1/4 10,000 3.66•0624KPU 6-20X1 1/2 7,000 4.04 •0806KPU 8-18X3/8 10,000 1.69•0808KPU 8-18X1/2 10,000 2.60•0810KPU 8-18X5/8 10,000 3.01•0812KPU 8-18X3/4 10,000 4.05•0816KPU 8-18X1 7,000 5.05•0820KPU 8-18X1 1/4 5,000 5.01•0824KPU 8-18X1 1/2 5,000 5.58•0828KPU 8-18X1 3/4 4,000 6.50•0832KPU 8-18X2 3,000 7.50•0840KPU 8-18X2 1/2 1,500 9.38•0848KPU 8-18X3 1,250 11.38 •1006KPU 10-16X3/8 10,000 3.00•1008KPU 10-16X1/2 10,000 3.661010KPU 10-16X5/8 8,000 4.271012KPU 10-16X3/4 7,000 4.741016KPU 10-16X1 6,000 5.961020KPU 10-16X1 1/4 4,000 6.851024KPU 10-16X1 1/2 1,000 8.101032KPU 10-16X2 1,000 12.601040KPU 10-16X2 1/2 1,000 12.401048KPU 10-16X3 1,000 14.92

•1208KPU 12-14X1/2 5,000 6.761210KPU 12-14X5/8 5,000 4.401211KPU 12-14X11/16 5,000 4.701212KPU 12-14X3/4 5,000 8.101216KPU 12-14X1 5,000 9.701220KPU 12-14X1 1/4 3,000 11.451224KPU 12-14X1 1/2 3,000 13.201232KPU 12-14X2 1,000 13.331240KPU 12-14X2 1/2 1,000 16.601248KPU 12-14X3 1,000 20.00 •1408KPU 1/4-14X1/2 4,000 9.121412KPU 1/4-14X3/4 4,000 9.781416KPU 1/4-14X1 3,000 11.601420KPU 1/4-14X1 1/4 2,500 13.471424KPU 1/4-14X1 1/2 2,000 13.501432KPU 1/4-14X2 1,000 17.881440KPU 1/4-14X2 1/2 1,000 22.501448KPU 1/4-14X3 700 27.001464KPU 1/4-14X4 500 36.00

•0808KPUMS 8-32X1/2 10,000 1.90•0812KPUMS 8-32X3/4 10,000 2.90•0816KPUMS 8-32X1 7,000 3.90 1008KPUMS 10-24X1/2 4,000 2.921012KPUMS 10-24X3/4 4,000 3.931016KPUMS 10-24X1 3,000 5.58 1110KPUMS 10-32X5/8 8,000 3.53 •1208KPUMS 12-24X1/2 5,000 3.801210KPUMS 12-24X5/8 5,000 4.451211KPUMS 12-24X11/16 5,000 4.90

1212KPUMS 12-24X3/4 5,000 5.201216KPUMS 12-24X1 5,000 7.061220KPUMS 12-24X1 1/4 3,000 8.921224KPUMS 12-24X1 1/2 3,000 11.171232KPUMS 12-24X2 1,000 15.00 1412KPUMS 1/4-20X3/4 4,000 7.801416KPUMS 1/4-20X1 3,000 10.001424KPUMS 1/4-20X1 1/2 1,500 13.001432KPUMS 1/4-20X2 1,000 17.801440KPUMS 1/4-20X2 1/2 1,000 22.501448KPUMS 1/4-20X3 900 27.00

1056KPFMS4W 10-24X3 1/2 700 17.801064KPFMS4W 10-24X4 600 20.80 1232KPFMS4W 12-24X2 1,000 14.751236KPFMS4W 12-24X2 1/4 1,000 16.701240KPFMS4W 12-24X2 1/2 1,000 18.601244KPFMS4W 12-24X2 3/4 1,000 20.501256KPFMS4W 12-24X3 1/2 500 23.301264KPFMS4W 12-24X4 500 26.70

1444KPFMS4W 1/4-20X2 3/4 800 28.001448KPFMS4W 1/4-20X3 700 30.331452KPFMS4W 1/4-20X3 1/4 600 33.001456KPFMS4W 1/4-20X3 1/2 600 35.551460KPFMS4W 1/4-20X3 3/4 500 38.17

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO







Ctn Wght Qty Lbs/M

10-16X1/2 7,000 5.06 10-16X5/8 7,000 4.75 10-16X3/4 6,000 6.66 10-16X1 4,000 8.05 10-16X1 1/2 3,000 10.12 10-16X2 2,000 11.92

12-14X1 4,000 8.90 12-14X1 1/4 3,000 10.40 12-14X1 1/2 2,000 13.49

1/4-14X3/4 3,000 12.23 114-14X1 2,500 14.60 114-14X1 114 1,500 15.75 114-14X112 1,250 19.34

Size Wght Lbs/M

2.78 3.10 3.63 4.25 4.90 6.25

2.66 3.30 4.27 3.90 4.70 5.83 7.29 8.63

10.63 12.50

Part # •1008KPW •1010KPW 1012KPW 1016KPW 1024KPW 1032KPW

1216KPW 1220KPW 1224KPW

1412KPW 1416KPW 1420KPW 1424KPW

Steel Zinc Plated





Part # .0606KPO .0608KPO O610KP0 O612KP0 O614KP0 O616KP0 O620KP0 O624KP0 .0632KPO

O808KP0 O808KP06 O810KP0 O812KP0 O816KP0 O820KP0 O824KP0 O824KP06 O828KP0 O832KP0 O836KP0 O840KP0 O848KP0

Size 6-20X3/8 6-20X12 6-20X5/8 6-20X34 6-20X7A3 6-20X1 6-20X1 1/4 6-20X1 1/2 6-20X2

8-18X12 8-18X12 #6HD 8-18X518 8-18X34 8-18X1 8-18X1 1/4 8-18X1 1/2 8-18X1 1/2#6HD 8-18X13/4 8-18X2 8-18X2 1/4 8-18X212 8-18X3

Part # 1010KPO 1012KPO 1016KPO 1020KPO 1022KP0 1024KP0 1028KP0 1032KP0 1036KP0 1040KPO

1216KP0 1220KP0 1232KP0

1412KP0 1416KP0 1420KP0 1424KP0 1428KP0 1432KP0 1440KPO

Size 10-16X5/8 10-16X3/4 10-16X1 10-16X1 1/4 10.16X13/8 10-16X1 1/2 10.16X13/4 10-16X2 10-16X2 1/4 10.16X212

12-14X1 12-14X1 1/4 12-14X2

1/4-14X3/4 114-14X1 114-14X1 114 114-14X112 114-14X1314 1/4-14X2 114-14X212

Steel Zinc Plated All items have #2 point

OVAL UNDERCUT PHILLIPS SELF DRILLING SCREWS


Part# Size 0808KPOU 8-18X1/2

Ctn Wght Lbs/M

10,000 2.63

Ctn Wght Part # Size (By Lbs/M 1008KPOU 10-16X12 10,000 3.60

Steel Zinc Plated Items marked "••" have

#1 point; items marked "•" have #2 point; all others have

#3 point



More sizes on next page

www.kanebridge.com

299

Part# .0604KPP .0605KPP .0606KPP .0607KPP .0608KPP .0610KPP .0612KPP .0614KPP .0616KPP .0620KPP .0624KPP .0626KPP .0628KPP .0632KPP .0648KPP

Size 6-20X1/4 6-20X5/16 6-20X318 6-20X7/16 6-20X1/2 6-20X518 6-20X3/4 6-20X7/8 6-20X1 6-20X1 1/4 6-20X1 1/2 6-20X15/8 6-20X13/4 6-20X2 6-20X3

1.43 1.70 1.70 2.05 2.06 2.46 2.77 3.08 3.61 3.66 4.51 4.40 5.00 5.70 7.50

Ctn (By

10,000 10,000 10,000 10,000 9,000 9,000 8,000 8,000 5,000

10,000 10,000 10,000 10,000 7,000 5,000 4,000 4,000 4,000 2,500 2,000 2,000 1,250

Wght Lbs/M

1.55 1.80 1.91 2.53 2.70 2.95 3.66 4.94 5.64

2.67 1.86 3.10 3.61 4.73 5.72 6.60 5.63 7.10 8.10 9.00

10.15 11.78

Ctn Wght Qty Lbs/M

8,000 7,000 5,000 4,000 4,000 4,000 3,000 2,000 2,000 1,500

4,000 3,000 1,500

4,000 3,000 2,000 2,000 1,500 1,000 1,000

4.17 4.74 5.90 7.37 7.80 8.10 9.67

12.56 14.16 19.60

9.70 11.45 16.40

9.80 10.91 13.47 15.47 17.38 19.75 24.25

Ctn Wght Qty Lbs/M

10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 9,000 8,000 5,000 5,000 5,000 1,500

Ctn Wght Part # Size Qty Lbs/M .0206KPP 2X3/8 10,000 0.55 .0208KPP 2X1/2 10,000 0.68

.0404KPP 4-24X1/4 10,000 0.85

.0406KPP 4-24X3/8 10,000 1.06

.0408KPP 4-24X1/2 10,000 1.26

.0410KPP 4-24X5/8 10,000 2.00

.0412KPP 4-24X3/4 10,000 1.90

.0416KPP 4-24X1 9,000 2.30

.0506KPP 5-20X3/8 10,000 1.37

.0508KPP 5-20X1/2 9,000 1.70

.0512KPP 5-20X3/4 8,000 2.20

.0516KPP 5-20X1 7,000 2.81




Manufactured to SAE 178 specifications For attaching metal lath to metal studs between 12-20 gauge thick


Part# 0406KPM 0408KPM

0606KPM 0608KPM 0612KPM 0616KPM 0620KPM 0626KPM 0628KPM 0632KPM 0640KPM 0648KPM

0806KPM 0807KPM 0808KPM 0809KPM 0810KPM 0812KPM 0814KPM 0816KPM 0820KPM 0822KPM 0824KPM 0826KPM 0828KPM 0830KPM 0832KPM 0836KPM 0840KPM 0848KPM 0856KPM 0864KPM

Size 4-24X3/8 4-24X1/2

6-20X3/8 6-20X1/2 6-20X3/4 6-20X1 6-20X1 1 14 6-20X1518 6-20X1314 6-20X2 6-20X212 6-20X3

8-18X318 8-18X7/16 8-18X1/2 8-18X9/16 8-18X518 8-18X3/4 8-18X7/8 8-18X1 8-18X1 1 14 8-18X1318 8-18X1 12 8-18X1518 8-18X1314 8-18X1718 8-18X2 8-18X2 8-18X2 12 8-18X3 8-18X3 12 8-18X4

Part # •1006KPM •1008KPM 1010KPM 1012KPM 1016KPM 1020KPM 1024KPM 1028KPM 1032KPM 1036KPM 1040KPM 1048KPM 1056KPM 1064KPM 1072KPM 1080KPM

•1208KPM 1210KPM 1212KPM 1216KPM 1220KPM 1224KPM 1232KPM 1240KPM 1248KPM 1256KPM 1264KPM

1412KPM 1416KPM 1420KPM 1424KPM 1432KPM 1440KPM 1448KPM 1456KPM 1464KPM

Size 10-16X3/8 10-16X1/2 10-16X5/8 10-16X3/4 10-16X1 10-16X1 1/4 10-16X1 1/2 10-16X1 3/4 10-16X2 10.16X21/4 10.16X212 10-16X3 10.16X312 10-16X4 10.16X412 10-16X5

12-14X1/2 12-14X5/8 12-14X3/4 12-14X1 12-14X1 1/4 12-14X1 1/2 12-14X2 12-14X212 12-14X3 12-14X312 12-14X4

114-14X34 114-14X1 114-14X1 1/4 114-14X112 1/4-14X2 1/4-14X212 1/4-14X3 1/4-14X312 1/4-14X4

Ctn Wght Qty Lbs/M


Ctn Wght Qty Lbs/M

7,000 0.85

7,000 0.96

8,000 8,000 7,000 7,000 5,000 3,000 3,000 2,500 2,000 1,500

6,000 6,000 5,000 5,000 5,000 5,000 5,000 4,000 3,000 3,000 2,000 3,000 3,000 2,000 2,000 2,000 2,000 1,500 1,000

900

2.35 2.96 3.75 3.61 4.81 4.60 6.30 7.00 8.40 9.70

3.45 3.64 4.03 4.10 3.94 4.75 5.22 5.60 6.80 7.06 7.29 7.40 8.50 9.00

10.47 12.00 12.55 14.96 14.88 15.50

5,000 6,000 6,000 6,000 5,000 4,000 3,000 3,000 2,000 2,000 1,500 1,000 1,000 1,000

750 750

5,000 5,000 5,000 3,000 3,000 2,000 1,000 1,000 1,000 1,000

750

3,000 2,000 1,000 1,000 1,000

800 700 600 500

3.80 5.00 4.73 5.51 6.50 9.12

10.42 10.38 15.05 14.14 15.45 16.60 18.80 21.40 24.00 30.00

6.88 5.56 6.00

10.60 9.21

13.86 17.12 18.00 21.50 23.00 26.70

10.98 13.00 15.00 17.33 22.13 26.32 31.00 35.67 40.00

Return to Table of Contents STEEL ZINC Self-Drilling Screws

Part# Size Ctn Qty

0608KPW 6-20X1/2 10,000 0612KPW 6-20X3/4 10,000 0616KPW 6-20X1 10,000 0620KPW 6-20X1 1/4 8,000 0624KPW 6-20X1 1/2 7,000 0632KPW 6-20X2 4,000

0806KPW 8-18X318 10,000 0808KPW 8-18X1/2 10,000 0810KPW 8-18X518 10,000 0812KPW 8-18X3/4 8,000 0816KPW 8-18X1 5,000 0820KPW 8-18X1 1/4 4,000 0824KPW 8-18X1 1/2 3,000 0832KPW 8-18X2 2,000 0840KPW 8-18X212 2,000 0848KPW 8-18X3 1,500



•0608KPW 6-20X1/2 10,000 2.78•0612KPW 6-20X3/4 10,000 3.10•0616KPW 6-20X1 10,000 3.63•0620KPW 6-20X1 1/4 8,000 4.25•0624KPW 6-20X1 1/2 7,000 4.90•0632KPW 6-20X2 4,000 6.25 •0806KPW 8-18X3/8 10,000 2.66•0808KPW 8-18X1/2 10,000 3.30•0810KPW 8-18X5/8 10,000 4.27•0812KPW 8-18X3/4 8,000 3.90•0816KPW 8-18X1 5,000 4.70•0820KPW 8-18X1 1/4 4,000 5.83•0824KPW 8-18X1 1/2 3,000 7.29•0832KPW 8-18X2 2,000 8.63•0840KPW 8-18X2 1/2 2,000 10.63•0848KPW 8-18X3 1,500 12.50

•1008KPW 10-16X1/2 7,000 5.06•1010KPW 10-16X5/8 7,000 4.751012KPW 10-16X3/4 6,000 6.661016KPW 10-16X1 4,000 8.051024KPW 10-16X1 1/2 3,000 10.121032KPW 10-16X2 2,000 11.92 1216KPW 12-14X1 4,000 8.901220KPW 12-14X1 1/4 3,000 10.401224KPW 12-14X1 1/2 2,000 13.49 1412KPW 1/4-14X3/4 3,000 12.231416KPW 1/4-14X1 2,500 14.601420KPW 1/4-14X1 1/4 1,500 15.751424KPW 1/4-14X1 1/2 1,250 19.34

•0406KPM 4-24X3/8 7,000 0.85•0408KPM 4-24X1/2 7,000 0.96 •0606KPM 6-20X3/8 8,000 2.35•0608KPM 6-20X1/2 8,000 2.96•0612KPM 6-20X3/4 7,000 3.75•0616KPM 6-20X1 7,000 3.61•0620KPM 6-20X1 1/4 5,000 4.81•0626KPM 6-20X1 5/8 3,000 4.60•0628KPM 6-20X1 3/4 3,000 6.30•0632KPM 6-20X2 2,500 7.00•0640KPM 6-20X2 1/2 2,000 8.40•0648KPM 6-20X3 1,500 9.70 •0806KPM 8-18X3/8 6,000 3.45•0807KPM 8-18X7/16 6,000 3.64•0808KPM 8-18X1/2 5,000 4.03•0809KPM 8-18X9/16 5,000 4.10•0810KPM 8-18X5/8 5,000 3.94•0812KPM 8-18X3/4 5,000 4.75•0814KPM 8-18X7/8 5,000 5.22•0816KPM 8-18X1 4,000 5.60•0820KPM 8-18X1 1/4 3,000 6.80•0822KPM 8-18X1 3/8 3,000 7.06•0824KPM 8-18X1 1/2 2,000 7.29•0826KPM 8-18X1 5/8 3,000 7.40•0828KPM 8-18X1 3/4 3,000 8.50•0830KPM 8-18X1 7/8 2,000 9.00•0832KPM 8-18X2 2,000 10.47•0836KPM 8-18X2 1/4 2,000 12.00•0840KPM 8-18X2 1/2 2,000 12.55•0848KPM 8-18X3 1,500 14.96•0856KPM 8-18X3 1/2 1,000 14.88•0864KPM 8-18X4 900 15.50

•1006KPM 10-16X3/8 5,000 3.80•1008KPM 10-16X1/2 6,000 5.001010KPM 10-16X5/8 6,000 4.731012KPM 10-16X3/4 6,000 5.511016KPM 10-16X1 5,000 6.501020KPM 10-16X1 1/4 4,000 9.121024KPM 10-16X1 1/2 3,000 10.421028KPM 10-16X1 3/4 3,000 10.381032KPM 10-16X2 2,000 15.051036KPM 10-16X2 1/4 2,000 14.141040KPM 10-16X2 1/2 1,500 15.451048KPM 10-16X3 1,000 16.601056KPM 10-16X3 1/2 1,000 18.801064KPM 10-16X4 1,000 21.401072KPM 10-16X4 1/2 750 24.001080KPM 10-16X5 750 30.00 •1208KPM 12-14X1/2 5,000 6.881210KPM 12-14X5/8 5,000 5.561212KPM 12-14X3/4 5,000 6.001216KPM 12-14X1 3,000 10.601220KPM 12-14X1 1/4 3,000 9.211224KPM 12-14X1 1/2 2,000 13.861232KPM 12-14X2 1,000 17.121240KPM 12-14X2 1/2 1,000 18.001248KPM 12-14X3 1,000 21.501256KPM 12-14X3 1/2 1,000 23.001264KPM 12-14X4 750 26.70 1412KPM 1/4-14X3/4 3,000 10.981416KPM 1/4-14X1 2,000 13.001420KPM 1/4-14X1 1/4 1,000 15.001424KPM 1/4-14X1 1/2 1,000 17.331432KPM 1/4-14X2 1,000 22.131440KPM 1/4-14X2 1/2 800 26.321448KPM 1/4-14X3 700 31.001456KPM 1/4-14X3 1/2 600 35.671464KPM 1/4-14X4 500 40.00

1010KPO 10-16X5/8 8,000 4.171012KPO 10-16X3/4 7,000 4.741016KPO 10-16X1 5,000 5.901020KPO 10-16X1 1/4 4,000 7.371022KPO 10-16X1 3/8 4,000 7.801024KPO 10-16X1 1/2 4,000 8.101028KPO 10-16X1 3/4 3,000 9.671032KPO 10-16X2 2,000 12.561036KPO 10-16X2 1/4 2,000 14.161040KPO 10-16X2 1/2 1,500 19.60 1216KPO 12-14X1 4,000 9.701220KPO 12-14X1 1/4 3,000 11.451232KPO 12-14X2 1,500 16.40 1412KPO 1/4-14X3/4 4,000 9.801416KPO 1/4-14X1 3,000 10.911420KPO 1/4-14X1 1/4 2,000 13.471424KPO 1/4-14X1 1/2 2,000 15.471428KPO 1/4-14X1 3/4 1,500 17.381432KPO 1/4-14X2 1,000 19.751440KPO 1/4-14X2 1/2 1,000 24.25

0808KPOU 8-18X1/2 10,000 2.63

1008KPOU 10-16X1/2 10,000 3.60

•0206KPP 2X3/8 10,000 0.55•0208KPP 2X1/2 10,000 0.68 •0404KPP 4-24X1/4 10,000 0.85•0406KPP 4-24X3/8 10,000 1.06•0408KPP 4-24X1/2 10,000 1.26•0410KPP 4-24X5/8 10,000 2.00•0412KPP 4-24X3/4 10,000 1.90•0416KPP 4-24X1 9,000 2.30 •0506KPP 5-20X3/8 10,000 1.37•0508KPP 5-20X1/2 9,000 1.70•0512KPP 5-20X3/4 8,000 2.20•0516KPP 5-20X1 7,000 2.81

•0604KPP 6-20X1/4 10,000 1.43•0605KPP 6-20X5/16 10,000 1.70•0606KPP 6-20X3/8 10,000 1.70•0607KPP 6-20X7/16 10,000 2.05•0608KPP 6-20X1/2 10,000 2.06•0610KPP 6-20X5/8 10,000 2.46•0612KPP 6-20X3/4 10,000 2.77•0614KPP 6-20X7/8 10,000 3.08•0616KPP 6-20X1 10,000 3.61•0620KPP 6-20X1 1/4 9,000 3.66•0624KPP 6-20X1 1/2 8,000 4.51•0626KPP 6-20X1 5/8 5,000 4.40•0628KPP 6-20X1 3/4 5,000 5.00•0632KPP 6-20X2 5,000 5.70•0648KPP 6-20X3 1,500 7.50

•0606KPO 6-20X3/8 10,000 1.55•0608KPO 6-20X1/2 10,000 1.80•0610KPO 6-20X5/8 10,000 1.91•0612KPO 6-20X3/4 10,000 2.53•0614KPO 6-20X7/8 9,000 2.70•0616KPO 6-20X1 9,000 2.95•0620KPO 6-20X1 1/4 8,000 3.66•0624KPO 6-20X1 1/2 8,000 4.94•0632KPO 6-20X2 5,000 5.64 •0808KPO 8-18X1/2 10,000 2.67•0808KPO6 8-18X1/2 #6HD 10,000 1.86•0810KPO 8-18X5/8 10,000 3.10•0812KPO 8-18X3/4 10,000 3.61•0816KPO 8-18X1 7,000 4.73•0820KPO 8-18X1 1/4 5,000 5.72•0824KPO 8-18X1 1/2 4,000 6.60•0824KPO6 8-18X1 1/2#6HD 4,000 5.63•0828KPO 8-18X1 3/4 4,000 7.10•0832KPO 8-18X2 2,500 8.10•0836KPO 8-18X2 1/4 2,000 9.00•0840KPO 8-18X2 1/2 2,000 10.15•0848KPO 8-18X3 1,250 11.78

More sizes on next page

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




MIT& Steel Zinc Plated

300 Phone: 800-222-9221 Fax: 201-337-2301

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

0707KPP 7-19X7/16 10,000 2.50 •1208KPP 12-14X1/2 5,000 635 0708KPP 7-19X1/2 10,000 2.50 1210KPP 12-14X518 5,000 657 0710KPP 7-19X518 10,000 2.86 1212KPP 12-14X3/4 5,000 8.10

.0712KPP 7-19X3/4 10,000 3.27 1214KPP 12-14X718 5,000 833 1216KPP 12-14X1 3,000 9.70

-0804KPP 8-18X1/4 10,000 2.47 1220KPP 12-14X1 1 14 3,000 11.45 (1805KPP 8-18X5/16 10,000 2.41 1224KPP 12-14X1 12 2,000 1320 0806KPP 8-18X318 10,000 2.96 1226KPP 12-14X1518 2,000 13.00 0807KPP 8-18X7/16 10,000 3.30 1228KPP 12-14X1314 1,000 14.70 (1808KPP 8-18X1/2 10,000 3.10 1232KPP 12-14X2 1,000 16.40 0810KPP 8-18X518 10,000 3.50 1240KPP 12-14X212 1,000 19.80

.0812KPP 8-18X3/4 9,000 4.05 1248KPP 12-14X3 750 23.00

.0814KPP 8-18X7/8 7,000 4.70 1256KPP 12-14X312 750 26.10

.0816KPP 8-18X1 6,000 5.05 1264KPP 12-14X4 750 2930 (1820KPP 8-18X1 1/4 5,000 5.83 1280KPP 12-14X5 500 3558 0824KPP 8-18X1 1/2 4,000 7.29 1296KPP 12-14X6 400 4230 0828KPP 8-18X13/4 3,000 8.10 (1830KPP 8-18X17/8 3,000 8.20 •1408KPP 14-14X1/2 3,000 9.12 0832KPP 8-18X2 2,000 9.22 1412KPP 14-14X3/4 3,000 1150 0836KPP 8-18X2 1/4 2,000 3.88 1414KPP 14-14X7/8 3,000 11.80 (1840KPP 8-18X212 2,000 11.26 1416KPP 14-14X1 2,000 13.70 0848KPP 8-18X3 2,000 12.50 1418KPP 14-14X1 1/8 2,000 13.80 0856KPP 8-18X312 1,000 17.40 1420KPP 14-14X1 1/4 1,000 1532 0864KPP 8-18X4 1,000 18.90 1424KPP 14-14X1 1/2 1,000 18.10

1428KPP 14-14X1 3/4 1,000 18.80 •1006KPP 10-16X3/8 9,000 4.10 1432KPP 14-14X2 1,000 21.40 •1007KPP 10-16X7/16 8,000 4.20 1436KPP 1/4-14X21/4 800 24.00 •1008KPP 10-16X1/2 8,000 4.40 1440KPP 14-14X2 1/2 800 2620 1010KPP 10-16X5/8 8,000 4.96 1448KPP 14-14X3 600 3130 1012KPP 10-16X3/4 7,000 5.51 1456KPP 14-14X3 1/2 600 3530 1016KPP 10-16X1 5,000 6.93 1464KPP 14-14X4 600 38.00 1020KPP 10-16X1 1/4 4,000 7.96 1480KPP 14-14X5 500 50.00 1024KPP 10-16X1 1/2 3,000 9.42 1496KPP 14-14X6 400 66.00 1028KPP 10-16X1 3/4 3,000 11.00 1032KPP 10-16X2 2,000 12.56 1110KPP 5/16-12X5/8 1,000 18.14 1040KPP 10.16X212 2,000 14.30 3112KPP 5/16-12X34 1,000 23.00 1044KPP 10-16X2 3/4 1,000 15.20 1048KPP 10-16X3 1,000 16.28 1056KPP 10.16X312 1,000 18.10 1064KPP 10-16X4 1,000 22.30 1080KPP 10-16X5 500 26.50 1096KPP 10-16X6 400 31.50

Items marked "•" have #2 point; All others

have #3 point

Ctn Wght Ctn Wght Part # Size Qty Lbs/M Part # Size Qty Lbs/M .0606KPPMS 632X3/8 10,000 1.68 1212KPPMS 12-24X3/4 4,000 8.10

1216KPPMS 12-24X1 3,500 9.70 •1008KPPMS 10-24X1/2 6,000 4.40 1224KPPMS 12-24X112 2,500 13.20 1012KPPMS 10-24X3/4 5,000 6.00 1016KPPMS 10-24X1 5,000 7.38 1412KPPMS 114-20X3/4 3,000 11.50 1024KPPMS 10-24X112 3,500 10.00 1416KPPMS 114-20X1 2,500 11.50

1424KPPMS 114-20X 1 1/2 2,000 19.00

254 3.00 350 3.92 4.92

435 4.82 538 6.63

10,000 10,000 10,000 9,000 6,000

8,000 8,000 7,000 5,000

Steel Zinc Framing Screws have #2 point

Framing Screws have #2 point

Steel Black Phosphate Finish

Items marked "•" have #2 point; All others

have #3 point

Part # Size .0806KPPS 8-18X318 .0808KPPS 8-18X1/2 .0810KPPS 8-18X518 .0812KPPS 8-18X3/4 .0816KPPS 8-18X1

•1008KPPS 10-16X1/2 1010KPPS 10-16X5/8 1012KPPS 10-16X3/4 1016KPPS 10-16X1

Ctn Wght Qty Lbs/M

•1408KPPS •1410KPPS 1412KPPS 1416KPPS 1420KPPS 1424KPPS

114-14X1/2 3,000 8.75 1/4-14X5/8 2,000 9.25 1/4-14X3/4 2,000 10.40 114-14X1 2,000 12.58 114-14X1 114 2,000 14.88 114-14X1 12 2,000 25.45


Part # Size Ctn Qty

Wght Lbs/M Part # Size _

Ctn Qty

Wght Lbs/M

0607KFZ 6-20X7/16 5,000 250 0707KFZ 7-19X7/16 10,000 256

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

0607KF 6-20X7/16 5,000 2.74 0707KF 7-19X7/16 10,000 2.58

Steel Zinc Plated

SERRATED PAN PHILLIPS SELF DRILLING SCREWS


SPECIAL PAN PHILLIPS FRAMING SCREW SELF DRILLING SCREWS

Manufactured to SAE 178 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

SPECIAL PAN PH IPS FRAMING SCREW SELF DRILLING SCREWS


Items marked "••" have #1 point; items marked "."


Steel Zinc Plated

PAN PHILLIPS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS




300 Phone: 800-222-9221 Fax: 201-337-2301


•0606KPPMS 6-32X3/8 10,000 1.68 •1008KPPMS 10-24X1/2 6,000 4.401012KPPMS 10-24X3/4 5,000 6.001016KPPMS 10-24X1 5,000 7.381024KPPMS 10-24X1 1/2 3,500 10.00

1212KPPMS 12-24X3/4 4,000 8.101216KPPMS 12-24X1 3,500 9.701224KPPMS 12-24X1 1/2 2,500 13.20 1412KPPMS 1/4-20X3/4 3,000 11.501416KPPMS 1/4-20X1 2,500 11.501424KPPMS 1/4-20X 1 1/2 2,000 19.00

0607KF 6-20X7/16 5,000 2.74

•0806KPPS 8-18X3/8 10,000 2.54•0808KPPS 8-18X1/2 10,000 3.00•0810KPPS 8-18X5/8 10,000 3.50•0812KPPS 8-18X3/4 9,000 3.92•0816KPPS 8-18X1 6,000 4.92 •1008KPPS 10-16X1/2 8,000 4.351010KPPS 10-16X5/8 8,000 4.821012KPPS 10-16X3/4 7,000 5.381016KPPS 10-16X1 5,000 6.63

•1408KPPS 1/4-14X1/2 3,000 8.75•1410KPPS 1/4-14X5/8 2,000 9.251412KPPS 1/4-14X3/4 2,000 10.401416KPPS 1/4-14X1 2,000 12.581420KPPS 1/4-14X1 1/4 2,000 14.881424KPPS 1/4-14X1 1/2 2,000 25.45

0707KF 7-19X7/16 10,000 2.58

NEW!

•0707KPP 7-19X7/16 10,000 2.50•0708KPP 7-19X1/2 10,000 2.50•0710KPP 7-19X5/8 10,000 2.86•0712KPP 7-19X3/4 10,000 3.27 ••0804KPP 8-18X1/4 10,000 2.47•0805KPP 8-18X5/16 10,000 2.41•0806KPP 8-18X3/8 10,000 2.96•0807KPP 8-18X7/16 10,000 3.30•0808KPP 8-18X1/2 10,000 3.10•0810KPP 8-18X5/8 10,000 3.50•0812KPP 8-18X3/4 9,000 4.05•0814KPP 8-18X7/8 7,000 4.70•0816KPP 8-18X1 6,000 5.05•0820KPP 8-18X1 1/4 5,000 5.83•0824KPP 8-18X1 1/2 4,000 7.29•0828KPP 8-18X1 3/4 3,000 8.10•0830KPP 8-18X1 7/8 3,000 8.20•0832KPP 8-18X2 2,000 9.22•0836KPP 8-18X2 1/4 2,000 3.88•0840KPP 8-18X2 1/2 2,000 11.26•0848KPP 8-18X3 2,000 12.50•0856KPP 8-18X3 1/2 1,000 17.40•0864KPP 8-18X4 1,000 18.90 •1006KPP 10-16X3/8 9,000 4.10•1007KPP 10-16X7/16 8,000 4.20•1008KPP 10-16X1/2 8,000 4.401010KPP 10-16X5/8 8,000 4.961012KPP 10-16X3/4 7,000 5.511016KPP 10-16X1 5,000 6.931020KPP 10-16X1 1/4 4,000 7.961024KPP 10-16X1 1/2 3,000 9.421028KPP 10-16X1 3/4 3,000 11.001032KPP 10-16X2 2,000 12.561040KPP 10-16X2 1/2 2,000 14.301044KPP 10-16X2 3/4 1,000 15.201048KPP 10-16X3 1,000 16.281056KPP 10-16X3 1/2 1,000 18.101064KPP 10-16X4 1,000 22.301080KPP 10-16X5 500 26.501096KPP 10-16X6 400 31.50

•1208KPP 12-14X1/2 5,000 6.351210KPP 12-14X5/8 5,000 6.571212KPP 12-14X3/4 5,000 8.101214KPP 12-14X7/8 5,000 8.331216KPP 12-14X1 3,000 9.701220KPP 12-14X1 1/4 3,000 11.451224KPP 12-14X1 1/2 2,000 13.201226KPP 12-14X1 5/8 2,000 13.001228KPP 12-14X1 3/4 1,000 14.701232KPP 12-14X2 1,000 16.401240KPP 12-14X2 1/2 1,000 19.801248KPP 12-14X3 750 23.001256KPP 12-14X3 1/2 750 26.101264KPP 12-14X4 750 29.301280KPP 12-14X5 500 35.581296KPP 12-14X6 400 42.30 •1408KPP 1/4-14X1/2 3,000 9.121412KPP 1/4-14X3/4 3,000 11.501414KPP 1/4-14X7/8 3,000 11.801416KPP 1/4-14X1 2,000 13.701418KPP 1/4-14X1 1/8 2,000 13.801420KPP 1/4-14X1 1/4 1,000 15.321424KPP 1/4-14X1 1/2 1,000 18.101428KPP 1/4-14X1 3/4 1,000 18.801432KPP 1/4-14X2 1,000 21.401436KPP 1/4-14X2 1/4 800 24.001440KPP 1/4-14X2 1/2 800 26.201448KPP 1/4-14X3 600 31.301456KPP 1/4-14X3 1/2 600 35.301464KPP 1/4-14X4 600 38.001480KPP 1/4-14X5 500 50.001496KPP 1/4-14X6 400 66.00 •3110KPP 5/16-12X5/8 1,000 18.143112KPP 5/16-12X3/4 1,000 23.00

0607KFZ 6-20X7/16 5,000 2.50

0707KFZ 7-19X7/16 10,000 2.56

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



'ize Ctn Wght Qty Lbs/M




ROUND WASHER PHILLIPS SELF DRILLING SCREWS


Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0806KPRW 8-18X318 10,000 2.99 •1006KPRW 10-16X3/8 5,000 3.74

.0808KPRW 8-18X1/2 10,000 3.21 •1008KPRW 10-16X1/2 5,000 4.16

.0812KPRW 8-18X3/4 10,000 4.21 1012KPRW 10-16X3/4 5,000 5.10

.0816KPRW 8-18X1 5,000 5.28 1016KPRW 10-16X1 5,000 6.83

.0820KPRW 8-18X11/4 4,000 6.28 1020KPRW 10-16X11/4 3,000 8.03

.0824KPRW 8-18X112 3,000 7.25 1024KPRW 10-16X112 2,500 9.25

.0828KPRW 8-18X13/4 3,000 8.23 1028KPRW 10-16X13/4 2,500 10.48

.0832KPRW 8-18X2 3,000 8.70 1032KPRW 10-16X2 2,000 11.77

.0840KPRW 8-18X212 3,000 12.30 1448KPRW 11414X3 1,000 47.40

1011MOOD

WAFER PHILLIPS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS


Part # Size Ctn Qty


Ctn Wght

1012KWAFMS 10-24X3/4 5,000 5.70 1412KWAFMS 1/4-20X3/4 Qty 2,000 9.30

1016KWAFMS 10-24X1 5,000 6.57 1416KWAFMS 114-20X1 2,000 12.90 1020KWAFMS 10.24X11/4 3,000 7.94 1420KWAFMS 114-20X11/4 1,000 15.37

1023KWAF 10.24X17/16 3,000 9.60 1424KWAFMS 114-20X112 1,000 16.75 1024KWAFMS 10.24X112 1,000 9.70 1428KWAFMS 114-20X13/4 1,000 21.34 1032KWAFMS 10-24X2 2,000 11.90 1432KWAFMS 1/4-20X2 1,000 21.20 1036KWAFMS 10.24X21/4 2,000 15.00 1040KWAFMS 10.24X212 2,000 14.80

10 x 1 7/16 size is a Reamer with Wings.

Steel Zinc Plated


Steel Zinc Plated


others have #3 point Steel Green

Ceramic Coated

PHILLIPS TRIM HEAD SELF DRILLING SCREWS

For attaching base board or trim through drywall into metal studs Case Hardened to Vickers HV 550-800 (Core Hardness: Vickers HV 270-450)

WAFER PHILLIPS SELF DRILLING SCREWS WITH SPACED THREADS

For attaching cement board to 14-20 gauge metal studs Case Hardened to Vickers HV 450-800 (Core Hardness: Vickers HV 290-450)

Si' • Ctn Wght Qty Lbs/M

Ctn Part # Size Qty

Wght Lbs/M

.0808KPFT 8-18X1/2 9,000

1.94 .0810KPFT 8-18X5/8 10,000

2.50

.0812KPFT 8-18X3/4 8,000

3.20 .0814KPFT2 8-18X7/8 7,000

3.28

.0816KPFT 8-16X1 5,000

3.90 .0848KPFT 8-18X3 2,000 11.20

•1008KPFT 10-16X1/2 8,000 2.90 1012KPFT 10-16X3/4 7,000 3.90 1016KPFT 10-16X1 5,000 5.40

Part it Size Ctn City

Wght Lbs/M Part It Size

Ctn (fly

Wght Lbs/M

0820KPFH 8-18X1 1/4 1,000 6.25 0826KPFH 8-18X15/8 1,000 10.00

Steel Green Ceramic Coated

WAFER PHILLIPS HIGH-LOW SELF DRILLING SCREWS WITH SPADE POINT

For attaching cement board to plywood Case Hardened to Vickers HV 450-800 (Core Hardness: Vickers HV 290-450)

4rjrIAtItoi•

.0606KPFT 6-20X3/8 10,000

1.70 .0608KPFT 6-20X1/2 10,000

1.50

.0612KPFT 6-20X3/4 10,000

2.10 .0616KPFT 6-20X1 7,500

2.71

.0624KPFT 6.20X112 5,000 4.20

.0626KPFT 6.20X15/8 5,000 4.30

.0636KPFT 6.20X21/4 3,000 6.31

Part # Size Ctn Wght Qty Part # Size

Ctn Wght Qty Lbs/M

0820KPFSH 8-18X1 1/4 1,000 5.00 0826KPFSH 8-18X15/8 1,000 8.00

Steel Zinc Plated Items marked with "."


Steel Green Ceramic Coated

WAFER PHILLIPS SELF DRILLING SCREWS WITH SPACED THREADS


WAFER PHILLIPS HIGH-LOW WINIBS CEMENT BOARD SCREWS WITH SHARP POINT

For attaching cement board to plywood Case Hardened

I Part # Size Ctn Wght Qty Lbs/M

.0808KWAF 8-18X1/2 5,000 2.37 1216KWAF 12-14X1 3,000 9.70

.0812KWAF 8-18X3/4 5,000 3.50 1220KWAF 12-14X11/4 3,000 11.45

.0816KWAF 8-18X1 5,000 5.60 1224KWAF 12-14X1 12 3,000 13.20

.0820KWAF 8-18X11/4 4,000 5.05 1228KWAF 12-14X13/4 2,500 13.00

.0824KWAF 8-18X112 3,000 6.63 1232KWAF 12-14X2 2,000 16.40

.0832KWAF 8-18X2 2,500 8.23 1240KWAF 12-14X212 1,000 17.83

.0840KWAF 8-18X212 2,000 10.38

.0848KWAF 8-18X3 2,000 12.07

e-mail: [email protected] www.kanebridge.com 301

Ctn Part # Size Qty

0820HWAFSRC 8-15X1 1/4 1,000 0826HWAFSRC 8-15X15/8 1,000

Wght Lbs/M

6.20 7.50

Ctn Wght Part# Size Qty Lbs/M 0836HWAFSRC 8-15X21/4 1,000 10.00



•0806KPRW 8-18X3/8 10,000 2.99•0808KPRW 8-18X1/2 10,000 3.21•0812KPRW 8-18X3/4 10,000 4.21•0816KPRW 8-18X1 5,000 5.28•0820KPRW 8-18X1 1/4 4,000 6.28•0824KPRW 8-18X1 1/2 3,000 7.25•0828KPRW 8-18X1 3/4 3,000 8.23•0832KPRW 8-18X2 3,000 8.70•0840KPRW 8-18X2 1/2 3,000 12.30

•1006KPRW 10-16X3/8 5,000 3.74•1008KPRW 10-16X1/2 5,000 4.161012KPRW 10-16X3/4 5,000 5.101016KPRW 10-16X1 5,000 6.831020KPRW 10-16X1 1/4 3,000 8.031024KPRW 10-16X1 1/2 2,500 9.251028KPRW 10-16X1 3/4 2,500 10.481032KPRW 10-16X2 2,000 11.77 1448KPRW 1/4-14X3 1,000 47.40

•0606KPFT 6-20X3/8 10,000 1.70•0608KPFT 6-20X1/2 10,000 1.50•0612KPFT 6-20X3/4 10,000 2.10•0616KPFT 6-20X1 7,500 2.71•0624KPFT 6-20X1 1/2 5,000 4.20•0626KPFT 6-20X1 5/8 5,000 4.30•0636KPFT 6-20X2 1/4 3,000 6.31

•0808KPFT 8-18X1/2 9,000 1.94•0810KPFT 8-18X5/8 10,000 2.50•0812KPFT 8-18X3/4 8,000 3.20•0814KPFT2 8-18X7/8 7,000 3.28•0816KPFT 8-16X1 5,000 3.90•0848KPFT 8-18X3 2,000 11.20 •1008KPFT 10-16X1/2 8,000 2.901012KPFT 10-16X3/4 7,000 3.901016KPFT 10-16X1 5,000 5.40

•0808KWAF 8-18X1/2 5,000 2.37•0812KWAF 8-18X3/4 5,000 3.50•0816KWAF 8-18X1 5,000 5.60•0820KWAF 8-18X1 1/4 4,000 5.05•0824KWAF 8-18X1 1/2 3,000 6.63•0832KWAF 8-18X2 2,500 8.23•0840KWAF 8-18X2 1/2 2,000 10.38•0848KWAF 8-18X3 2,000 12.07

1216KWAF 12-14X1 3,000 9.701220KWAF 12-14X1 1/4 3,000 11.451224KWAF 12-14X1 1/2 3,000 13.201228KWAF 12-14X1 3/4 2,500 13.001232KWAF 12-14X2 2,000 16.401240KWAF 12-14X2 1/2 1,000 17.83

0820HWAFSRC 8-15X1 1/4 1,000 6.200826HWAFSRC 8-15X1 5/8 1,000 7.50

0836HWAFSRC 8-15X2 1/4 1,000 10.00

1012KWAFMS 10-24X3/4 5,000 5.701016KWAFMS 10-24X1 5,000 6.571020KWAFMS 10-24X1 1/4 3,000 7.94•• 1023KWAF 10-24X1 7/16 3,000 9.601024KWAFMS 10-24X1 1/2 1,000 9.701032KWAFMS 10-24X2 2,000 11.901036KWAFMS 10-24X2 1/4 2,000 15.001040KWAFMS 10-24X2 1/2 2,000 14.80

1412KWAFMS 1/4-20X3/4 2,000 9.301416KWAFMS 1/4-20X1 2,000 12.901420KWAFMS 1/4-20X1 1/4 1,000 15.371424KWAFMS 1/4-20X1 1/2 1,000 16.751428KWAFMS 1/4-20X1 3/4 1,000 21.341432KWAFMS 1/4-20X2 1,000 21.20

0820KPFH 8-18X1 1/4 1,000 6.25 0826KPFH 8-18X1 5/8 1,000 10.00

0820KPFSH 8-18X1 1/4 1,000 5.00 0826KPFSH 8-18X1 5/8 1,000 8.00

•• 10 x 1 7/16 size is a Reamer with Wings.

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO





MODIFIED TRUSS SIX-LOBE SELF DRILLING SCREWS



Part # .06061(1M .06081(1M O612KTM .06161(1M

(18061(1M (18081(1M .08101(1M O812KTM .08161(1M (18201(1M .08241(TM (18261(1M (18281(1M (18321(1M (18401(1M (18481(1M (18561(1M

Size 6-20X3/8 6-20X1/2 6-20X3/4 6-20X1

8-18X3/8 8-18X1/2 8-18X5/8 8-18X3/4 8-18X1 8-18X1 1/4 8-18X1 1/2 8-18X15/8 8-18X1 3/4 8-18X2 8-18X212 8-18X3 8-18X312

Ctn Qty

8,000 8,000 7,000 7,000

6,000 5,000 5,000 5,000 4,000 3,000 3,000 3,000 3,000 2,000 2,000 1,500 1,000

Wght Lbs/M

2.10 2.50 3.10 4.10

3.00 3.70 4.10 4.40 5.60 6.50 7.50 7.90 8.80 9.40

11.30 13.00 15.50

Part # 1020KTM 1024KTM 1028KTM 1032KTM 1040KTM 1048KTM 10561(TM 10641(TM

1216KTM 1220KTM 12244(TM 1232KTM

1412KTM 1416KTM 1420KTM 14244(TM 1432KTM 1440KTM 1448KTM

Size 10-16X1 114 10-16X1 12 10.16X1314 10-16X2 10.16X212 10-16X3 10.16X312 10-16X4

12-14X1 12-14X1 1 14 12-14X1 12 12-14X2

1M-14X3/4 1M-14X1 1M-14X1 1/4 1M-14X1 1/2 1M-14X2 1M-14X2 1/2 1M-14X3

•1008KTM 1010KTM 1012KTM 10161(TM

10-16X1/2 10-16X518 10-16X3/4 10-16X1

6,000 6,000 5,000 4,000

3.90 4.30 5.30 6.30

302 Phone: 800-222-9221

Ctn Qty

3,000 3,000 2,000 2,000 1,500 1,000 1,000 1,000

3,000 2,000 2,000 1,000

2,000 2,000 1,500 1,000 1,000

800 700

Wght Lbs/M

7.60 9.00

1030 11.10 13.80 16.10 19.00 2150

730 920

10.80 14.10

10.90 12.60 15.00 1730 22.10 26.10 30.90



(18081(TT .08121(TT .08161M (1820KTT

3.62 4.33 5.28 6.10

.06061M 6-20X3/8 10,000 1.99

8-18X1/2 10,000 8-18X3/4 8,000 8-18X1 6,000 8-18X11/4 6,000

•10081M 10121(TT 10161M 10241M

4.75 6.00 6.98 9.35

8,000 5,000 5,000 3,000

10-16X1/2 10-16X3/4 10-16X1 10-16X1 1/2

1412KTT 1416KTT 14321(TT

1/4-14X3/4 1/4-14X1 114-14X2

3,000 2,000

900

11.05 13.43 22.20

Ctn Wght Qty Lbs/M Part # Siz-



TRUSS SIX-LOBE SELF DRILLING SCREWS






.06061(TP

.0608KTP

.0612KTP

.06161(TP

.0808KTP

.0810KTP

.0812KTP

.08161(TP

.0820KTP

.08241(TP

.0832KTP

•1008KTP 1010KTP 1012KTP 10161(TP 1020KTP 1024KTP 1032KTP

6-20X3/8 6-20X1/2 6-20X3/4 6-20X1

8-18X1/2 8-18X518 8-18X3/4 8-18X1 8-18X1 1 14 8-18X1 12 8-18X2

10-16X1/2 10-16X5/8 10-16X3/4 10-16X1 10-16X1 1/4 10-16X1 1/2 10-16X2

1212KTP 1216KTP 1232KTP

1412KTP 1416KTP 1420KTP 1424KTP 1432KTP 1436KTP 1440KTP 1448KTP 1464KTP

12-14X3/4 12-14X1 12-14X2

1/4-14X3/4 1/4-14X1 1/4-14X1 1/4 1/4-14X1 1/2 114-14X2 114-14X21/4 114-14X212 1/4-14X3 1/4-14X4

10,000 10,000 10,000 10,000

10,000 10,000

9,000 6,000 5,000 4,000 2,000

8,000 8,000 7,000 5,000 4,000 3,000 2,000

1.75 2.06 2.88 3.43

3.10 3.50 4.05 5.05 5.83 3.10 9.22

4.40 4.96 5.51 6.93 8.07 9.20

11.75

7.67 9.30

15.78

10.88 13.00 15.50 17.00 21.80 23.80 26.10 30.63 39.50

5,000 3,000 1,000

3,000 2,000 1,500 1,000 1,000

800 800 600 600



Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

1012KWTF 10-16)C3/4 5,000 5.14 10241(WTF 10-16X1 1/2 1,000 950 1016KWTF 10-16X1 5,000 6.60 1032KWTF 10-16X2 2,000 1236 1020KWIF 10-16X1 1/4 3,000 8.08

Fax: 201-337-2301

WAFER SIX-LOBE SELF DRILLING SCREWS WITH SPACED THREADS


I[SOURCE BOOK

Steel Zinc Plated






Ctn Wght Qty Lbs/M

1.72

1212KTF

12-14X3/4

4,000

5.60

2.00

1216KTF

12-14X1

4,000

630

2.33

1220KTF

12-14X1 1 14 3,000

820

3.00

1224KTF

12-14X1 12 2,000

10.00

3.75 1228KTF

12-14X1314 2,000 1230

4.40 1232KTF

12-14X2 2,000 13.00

5.67 12361(TF

12-14X2 1,500 15.00

1240KTF

12-14X212 1,500 16.80

2.63

1244KTF

12-14X2 3/4 1,500

1820

3.00 1248KTF

12-14X3 1,000 20.00

3.42 12561(TF

12-14X312 750 2330

4.32 12641(TF

12-14X4

600 26.70 5.17 6.07 1412KTF 1M-14X3/4 3,000 728

6.90

1416KTF

1M-14X1

3,000

922

7.80

1420KTF

1M-14X1 1/4 2,000

1130

9.83

1424KTF

1M-14X1 1/2 1,500

1433

11.57 1432KTF

1M-14X2 1,000 18.00

14361(TF

1/4-14X21/4 1,000 14.00

6.03

1440KTF

1M-14X2 1/2 1,000

23.17

7.97

1444KTF

1M-14X2 3/4

900 2550

8.20 1448KTF

1M-14X3 900 28.00

8.00

14561(TF

1M-14X3 1/2

800

3225

9.14 14641(TF

1M-14X4 600 37.00

10.45

1472KTF

1M-14X4 1/2

500

41.00

12.87 1480KTF

1M-14X5 400 4550

15.30 14961(TF

1M-14X6 300 54.75


Part # Size Ctn Qty

.0608KTF 6-20X1/2 10,000

.0610KTF 6-20X5/8 10,000

.0612KTF 6-20X3/4 10,000

.06161(TF 6-20X1 10,000

.0620KTF 6-20X1 1/4 10,000

.06244(TF 6-20X1 1/2 7,000

.0632KTF 6-20X2 5,000

(1808KTF 8-18X1/2 10,000 .0810KTF 8-18X518 10,000 .0812KTF 8-18X3/4 10,000 .08161(TF 8-18X1 8,000 (1820KTF 8-18X1 1/4 7,000 .08244(TF 8-18X1 1/2 5,000 (1828KTF 8-18X13/4 4,000 .0832KTF 8-18X2 3,000 (1840KTF 8-18X212 1,500 (1848KTF 8-18X3 1,250

1012KTF 10-16X3/4 8,000 1016KTF 10-16X1 5,000 1020KTF 10-16X1 1/4 4,000 1024KTF 10-16X1 1/2 4,000 1028KTF 10-16X1 3/4 3,000 1032KTF 10-16X2 3,000 1040KTF 10-16X212 1,500 1048KTF 10-16X3 1,000

302 Phone: 800-222-9221 Fax: 201-337-2301


•0606KTP 6-20X3/8 10,000 1.75•0608KTP 6-20X1/2 10,000 2.06•0612KTP 6-20X3/4 10,000 2.88•0616KTP 6-20X1 10,000 3.43 •0808KTP 8-18X1/2 10,000 3.10•0810KTP 8-18X5/8 10,000 3.50•0812KTP 8-18X3/4 9,000 4.05•0816KTP 8-18X1 6,000 5.05•0820KTP 8-18X1 1/4 5,000 5.83•0824KTP 8-18X1 1/2 4,000 3.10•0832KTP 8-18X2 2,000 9.22 •1008KTP 10-16X1/2 8,000 4.401010KTP 10-16X5/8 8,000 4.961012KTP 10-16X3/4 7,000 5.511016KTP 10-16X1 5,000 6.931020KTP 10-16X1 1/4 4,000 8.071024KTP 10-16X1 1/2 3,000 9.201032KTP 10-16X2 2,000 11.75

1212KTP 12-14X3/4 5,000 7.671216KTP 12-14X1 3,000 9.301232KTP 12-14X2 1,000 15.78 1412KTP 1/4-14X3/4 3,000 10.881416KTP 1/4-14X1 2,000 13.001420KTP 1/4-14X1 1/4 1,500 15.501424KTP 1/4-14X1 1/2 1,000 17.001432KTP 1/4-14X2 1,000 21.801436KTP 1/4-14X2 1/4 800 23.801440KTP 1/4-14X2 1/2 800 26.101448KTP 1/4-14X3 600 30.631464KTP 1/4-14X4 600 39.50

•0606KTT 6-20X3/8 10,000 1.99 •0808KTT 8-18X1/2 10,000 3.62•0812KTT 8-18X3/4 8,000 4.33•0816KTT 8-18X1 6,000 5.28•0820KTT 8-18X1 1/4 6,000 6.10

•1008KTT 10-16X1/2 8,000 4.751012KTT 10-16X3/4 5,000 6.001016KTT 10-16X1 5,000 6.981024KTT 10-16X1 1/2 3,000 9.35 1412KTT 1/4-14X3/4 3,000 11.051416KTT 1/4-14X1 2,000 13.431432KTT 1/4-14X2 900 22.20

1012KWTF 10-16X3/4 5,000 5.141016KWTF 10-16X1 5,000 6.601020KWTF 10-16X1 1/4 3,000 8.08

1024KWTF 10-16X1 1/2 1,000 9.501032KWTF 10-16X2 2,000 12.36

•0608KTF 6-20X1/2 10,000 1.72•0610KTF 6-20X5/8 10,000 2.00•0612KTF 6-20X3/4 10,000 2.33•0616KTF 6-20X1 10,000 3.00•0620KTF 6-20X1 1/4 10,000 3.75•0624KTF 6-20X1 1/2 7,000 4.40•0632KTF 6-20X2 5,000 5.67 •0808KTF 8-18X1/2 10,000 2.63•0810KTF 8-18X5/8 10,000 3.00•0812KTF 8-18X3/4 10,000 3.42•0816KTF 8-18X1 8,000 4.32•0820KTF 8-18X1 1/4 7,000 5.17•0824KTF 8-18X1 1/2 5,000 6.07•0828KTF 8-18X1 3/4 4,000 6.90•0832KTF 8-18X2 3,000 7.80•0840KTF 8-18X2 1/2 1,500 9.83•0848KTF 8-18X3 1,250 11.57 1012KTF 10-16X3/4 8,000 6.031016KTF 10-16X1 5,000 7.971020KTF 10-16X1 1/4 4,000 8.201024KTF 10-16X1 1/2 4,000 8.001028KTF 10-16X1 3/4 3,000 9.141032KTF 10-16X2 3,000 10.451040KTF 10-16X2 1/2 1,500 12.871048KTF 10-16X3 1,000 15.30

1212KTF 12-14X3/4 4,000 5.601216KTF 12-14X1 4,000 6.301220KTF 12-14X1 1/4 3,000 8.201224KTF 12-14X1 1/2 2,000 10.001228KTF 12-14X1 3/4 2,000 12.301232KTF 12-14X2 2,000 13.001236KTF 12-14X2 1/4 1,500 15.001240KTF 12-14X2 1/2 1,500 16.801244KTF 12-14X2 3/4 1,500 18.201248KTF 12-14X3 1,000 20.001256KTF 12-14X3 1/2 750 23.301264KTF 12-14X4 600 26.70 1412KTF 1/4-14X3/4 3,000 7.281416KTF 1/4-14X1 3,000 9.221420KTF 1/4-14X1 1/4 2,000 11.301424KTF 1/4-14X1 1/2 1,500 14.331432KTF 1/4-14X2 1,000 18.001436KTF 1/4-14X2 1/4 1,000 14.001440KTF 1/4-14X2 1/2 1,000 23.171444KTF 1/4-14X2 3/4 900 25.501448KTF 1/4-14X3 900 28.001456KTF 1/4-14X3 1/2 800 32.251464KTF 1/4-14X4 600 37.001472KTF 1/4-14X4 1/2 500 41.001480KTF 1/4-14X5 400 45.501496KTF 1/4-14X6 300 54.75

•0606KTM 6-20X3/8 8,000 2.10•0608KTM 6-20X1/2 8,000 2.50•0612KTM 6-20X3/4 7,000 3.10•0616KTM 6-20X1 7,000 4.10 •0806KTM 8-18X3/8 6,000 3.00•0808KTM 8-18X1/2 5,000 3.70•0810KTM 8-18X5/8 5,000 4.10•0812KTM 8-18X3/4 5,000 4.40•0816KTM 8-18X1 4,000 5.60•0820KTM 8-18X1 1/4 3,000 6.50•0824KTM 8-18X1 1/2 3,000 7.50•0826KTM 8-18X1 5/8 3,000 7.90•0828KTM 8-18X1 3/4 3,000 8.80•0832KTM 8-18X2 2,000 9.40•0840KTM 8-18X2 1/2 2,000 11.30•0848KTM 8-18X3 1,500 13.00•0856KTM 8-18X3 1/2 1,000 15.50 •1008KTM 10-16X1/2 6,000 3.901010KTM 10-16X5/8 6,000 4.301012KTM 10-16X3/4 5,000 5.301016KTM 10-16X1 4,000 6.30

1020KTM 10-16X1 1/4 3,000 7.601024KTM 10-16X1 1/2 3,000 9.001028KTM 10-16X1 3/4 2,000 10.301032KTM 10-16X2 2,000 11.101040KTM 10-16X2 1/2 1,500 13.801048KTM 10-16X3 1,000 16.101056KTM 10-16X3 1/2 1,000 19.001064KTM 10-16X4 1,000 21.50 1216KTM 12-14X1 3,000 7.301220KTM 12-14X1 1/4 2,000 9.201224KTM 12-14X1 1/2 2,000 10.801232KTM 12-14X2 1,000 14.10 1412KTM 1/4-14X3/4 2,000 10.901416KTM 1/4-14X1 2,000 12.601420KTM 1/4-14X1 1/4 1,500 15.001424KTM 1/4-14X1 1/2 1,000 17.301432KTM 1/4-14X2 1,000 22.101440KTM 1/4-14X2 1/2 800 26.101448KTM 1/4-14X3 700 30.90

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



FLAT SQUARE RECESS SELF DRILLING SCREWS


1032KQF

10-16X2 2,000 12.60 1028KQF

10-16X1 3/4 3,000

8.83 1040KQF

10-16X212 2,000 19.60 1048KQF

10-16X3 1,000 17.00 1056KQF

10-16X312 1,000 17.70 1064KQF

10-16X4

750 20.17

1212KQF

12-14X3/4

5,000

8.10 1216KQF

12-14X1

3,000

9.70 1220KQF

12-14X1 1/4 3,000

11.45 1224KQF

12-14X1 1/2 2,000

13.20 1228KQF

12-14X1 3/4 2,000

12.30 1232KQF

12-14X2 1,000 16.40 1240KQF

12-14X212 1,000 20.37 1248KQF

12-14X3

750 20.42 1264KQF

12-14X4

750 22.00

1412KQF 1/4-14X3/4 3,000 9.78 1416KQF

114-14X1 2,000 11.68 1420KQF

114-14X1 1/4 1,000

13.47 1424KQF

114-14X1 1/2 1,000

15.47 1432KQF

1/4-14X2 1,000 20.49 1440KQF

1/4-14X212 1,000 22.30 1448KQF

1/4-14X3

900 27.00

.0606KQF

6-20X3/8

10,000

1.17 .0608KQF

6-20X1/2

10,000

1.45 .0610KQF

6-20X5/8

10,000

1.79 .0612KQF

6-20X3/4

10,000

2.38 .0616KQF

6-20X1

10,000

2.75 .0620KQF

6-20X1 1/4 10,000

3.40 .0624KQF

6-20X1 1/2

7,000

5.25

.0808KQF

8-18X1/2

10,000

2.05 .0810KQF

8-18X5/8

10,000

2.48 .0812KQF

8-18X3/4

9,000

3.50 .0816KQF

8-18X1

6,000

3.88 .0820KQF

8-18X1 1/4

5,000

5.01 .0824KQF

8-18X1 1/2

4,000

7.30 .0828KQF

8-18X1 3/4

3,000

8.30 .0832KQF

8-18X2

2,000

9.22 .0840KQF 8-18X212 2,000 9.43 .0848KQF 8-18X3 2,000 11.25

•1008KQF 10-16X1/2 10,000 3.05 1012KQF

10-16X3/4 7,000

4.74 1016KQF

10-16X1 5,000

5.96 1020KQF

10-16X11/4 4,000 6.85 1024KQF

10-16X112 3,000 8.10


WAFER SIX-LOBE SELF DRILLING SCREWS WITH MACHINE SCREW THREAD


Part # Size 1012KWTFMS 10-24X3/4 5,000 1016KWTFMS 10-24X1 5,000 1020KWTFMS 10-24X1 1/4 3,000

Lbs/M Wght

5.10 1024KWTFMS 10-24X1 1/2 1,000 9.50 6.13 1032KWTFMS 10-24X2 2,000 12.30 8.00


Ctn Qty

Ctn Qty

Steel Zinc Plated



Part # Size Ctn Wght Qty thsAl Part # Size

Ctn Wght Qty Lbs/M

Special #6 & #7 Pan Head

Framing Screw now available in

Steel Zinc or Black Phosphate-

page 300.




MODIFIED TRUSS SQUARE RECESS SELF DRILLING SCREWS

Manufactured to SAE .118 specifications For attaching metal lath to metal studs between 12-20 gauge thick


Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0606KQM 6-20X318 8,000 2.62 •1008KQM 10-16X1/2 6,000 3.83

.0608KQM 6-20X1/2 8,000 2.92 1012KONI 10-16X3/4 6,000 5.00

.0612KQM 6-20X3/4 7,000 3.68 1016KONI 10-16X1 5,000 6.63

.0616KQM 6-20X1 7,000 4.43 1020KONI 10-16X1 1/4 4,000 7.75 1024KONI 10-16X1 1/2 3,000 9.00

.0806KQM 8-18X318 6,000 3.58 1032KONI 10-16X2 2,000 11.67

.0808KQM 8-18X1/2 5,000 4.00 1040KONI 10.16X212 1,500 14.50

.0810KQM 8-18X518 5,000 4.57 1048KONI 10-16X3 1,000 16.75

.0812KQM 8-18X3/4 5,000 5.00 1056KONI 10.16X312 1,000 19.25

.0816KQM 8-18X1 4,000 5.83 1064KONI 10-16X4 1,000 21.80

.0820KQM 8-18X1 1/4 3,000 6.78

.0824KQM 8-18X1 1/2 2,000 7.78 1216KONI 12-14X1 3,000 7.93

.0830KQM 8-18X17/8 2,000 9.00 1224KONI 12-14X1 1/2 2,000 11.20

.0832KQM 8-18X2 2,000 9.63 1232KONI 12-14X2 1,000 14.50

.0840KQM 8-18X212 2,000 12.00

.0848KQM 8-18X3 1,500 13.00 1416KONI 114-14X1 2,000 13.25

.0856KQM 8-18X312 1,000 15.25 1424KONI 114-14X1 1/2 1,000 17.00 1432KONI 1/4-14X2 1,000 22.80 1440KONI 1/4-14X212 800 26.10 1448KONI 1/4-14X3 700 30.75

Steel Zinc Plated




Manufactured to ASME B18.6.3 SAE 118 specifications ase Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0606KQP 6-20X3/8 10,000 1.70 •1208KQP 12-14X1/2 5,000 6.22

.0608KQP 6-20X1/2 10,000 2.06 1210KQP 12-14X518 5,000 6.71

.0610KQP 6-20X5/8 10,000 2.46 1212KQP 12-14X3/4 5,000 8.10

.0612KQP 6-20X3/4 10,000 2.77 1216KQP 12-14X1 3,000 9.70

.0616KQP 6-20X1 10,000 3.61 1220KQP 12-14X11/4 3,000 11.45

.0620KQP 6.20X11/4 9,000 4.06 1224KQP 12-14X112 2,000 13.20 1228KQP 12-14X13/4 1,000 14.13

.0806KQP 8-18X3/8 10,000 2.77 1232KQP 12-14X2 1,000 15.60

.0808KQP 8-18X1/2 10,000 3.10 1240KQP 12-14X212 1,000 19.17

.0810KQP 8-18X5/8 3,000 3.50 1248KQP 12-14X3 750 22.33

.0812KQP 8-18X3/4 3,000 4.05 1256KQP 12-14X312 750 25.50

.0816KQP 8-18X1 2,000 5.05 1264KQP 12-14X4 750 29.00

.0820KQP 8-18X11/4 5,000 5.83

.0824KQP 8-18X112 4,000 7.29 •1408KQP 114-14X1/2 3,000 9.20

.0832KQP 8-18X2 2,000 9.22 1412KQP 1/4-14X3/4 3,000 11.50

.0840KQP 8-18X212 2,000 10.40 1416KQP 114-14X1 2,000 12.70

.0848KQP 8-18X3 2,000 12.40 1420KQP 114-14X11/4 1,000 15.32 1424KQP 114-14X1 1/2 1,000 18.10

•1006KQP 10-16X318 9,000 4.10 1428KQP 114-14X13/4 1,000 19.62 •1008KQP 10-16X1/2 8,000 4.40 1432KQP 114-14X2 1,000 22.00 1010KQP 10-16X518 6,000 4.96 1440KQP 114-14X212 800 26.50 1012KQP 10-16X3/4 5,000 5.51 1448KQP 1/4-14X3 600 31.17 1016KQP 10-16X1 2,000 6.93 1456KQP 1/4-14X312 600 35.60 1020KQP 10-16X11/4 1,000 7.96 1464KQP 1/4-14X4 600 40.00 1024KQP 10-16X1 1/2 1,000 9.42 1032KQP 10-16X2 2,000 12.56 1040KQP 10-16X212 2,000 14.25 1048KQP 10-16X3 1,000 16.75 1056KQP 10-16X312 1,000 19.20 1064KQP 10-16X4 1,000 21.70



1012KWTFMS 10-24X3/4 5,000 5.101016KWTFMS 10-24X1 5,000 6.131020KWTFMS 10-24X1 1/4 3,000 8.00

1024KWTFMS 10-24X1 1/2 1,000 9.501032KWTFMS 10-24X2 2,000 12.30

Special #6 & #7 Pan Head

Framing Screw now available in

Steel Zinc or Black Phosphate—

page 300.

•0606KQF 6-20X3/8 10,000 1.17•0608KQF 6-20X1/2 10,000 1.45•0610KQF 6-20X5/8 10,000 1.79•0612KQF 6-20X3/4 10,000 2.38•0616KQF 6-20X1 10,000 2.75•0620KQF 6-20X1 1/4 10,000 3.40•0624KQF 6-20X1 1/2 7,000 5.25 •0808KQF 8-18X1/2 10,000 2.05•0810KQF 8-18X5/8 10,000 2.48•0812KQF 8-18X3/4 9,000 3.50•0816KQF 8-18X1 6,000 3.88•0820KQF 8-18X1 1/4 5,000 5.01•0824KQF 8-18X1 1/2 4,000 7.30•0828KQF 8-18X1 3/4 3,000 8.30•0832KQF 8-18X2 2,000 9.22•0840KQF 8-18X2 1/2 2,000 9.43•0848KQF 8-18X3 2,000 11.25 •1008KQF 10-16X1/2 10,000 3.051012KQF 10-16X3/4 7,000 4.741016KQF 10-16X1 5,000 5.961020KQF 10-16X1 1/4 4,000 6.851024KQF 10-16X1 1/2 3,000 8.10

1032KQF 10-16X2 2,000 12.601028KQF 10-16X1 3/4 3,000 8.831040KQF 10-16X2 1/2 2,000 19.601048KQF 10-16X3 1,000 17.001056KQF 10-16X3 1/2 1,000 17.701064KQF 10-16X4 750 20.17 1212KQF 12-14X3/4 5,000 8.101216KQF 12-14X1 3,000 9.701220KQF 12-14X1 1/4 3,000 11.451224KQF 12-14X1 1/2 2,000 13.201228KQF 12-14X1 3/4 2,000 12.301232KQF 12-14X2 1,000 16.401240KQF 12-14X2 1/2 1,000 20.371248KQF 12-14X3 750 20.421264KQF 12-14X4 750 22.00 1412KQF 1/4-14X3/4 3,000 9.781416KQF 1/4-14X1 2,000 11.681420KQF 1/4-14X1 1/4 1,000 13.471424KQF 1/4-14X1 1/2 1,000 15.471432KQF 1/4-14X2 1,000 20.491440KQF 1/4-14X2 1/2 1,000 22.301448KQF 1/4-14X3 900 27.00

•0606KQM 6-20X3/8 8,000 2.62•0608KQM 6-20X1/2 8,000 2.92•0612KQM 6-20X3/4 7,000 3.68•0616KQM 6-20X1 7,000 4.43 •0806KQM 8-18X3/8 6,000 3.58•0808KQM 8-18X1/2 5,000 4.00•0810KQM 8-18X5/8 5,000 4.57•0812KQM 8-18X3/4 5,000 5.00•0816KQM 8-18X1 4,000 5.83•0820KQM 8-18X1 1/4 3,000 6.78•0824KQM 8-18X1 1/2 2,000 7.78•0830KQM 8-18X1 7/8 2,000 9.00•0832KQM 8-18X2 2,000 9.63•0840KQM 8-18X2 1/2 2,000 12.00•0848KQM 8-18X3 1,500 13.00•0856KQM 8-18X3 1/2 1,000 15.25

•1008KQM 10-16X1/2 6,000 3.831012KQM 10-16X3/4 6,000 5.001016KQM 10-16X1 5,000 6.631020KQM 10-16X1 1/4 4,000 7.751024KQM 10-16X1 1/2 3,000 9.001032KQM 10-16X2 2,000 11.671040KQM 10-16X2 1/2 1,500 14.501048KQM 10-16X3 1,000 16.751056KQM 10-16X3 1/2 1,000 19.251064KQM 10-16X4 1,000 21.80 1216KQM 12-14X1 3,000 7.931224KQM 12-14X1 1/2 2,000 11.201232KQM 12-14X2 1,000 14.50 1416KQM 1/4-14X1 2,000 13.251424KQM 1/4-14X1 1/2 1,000 17.001432KQM 1/4-14X2 1,000 22.801440KQM 1/4-14X2 1/2 800 26.101448KQM 1/4-14X3 700 30.75

•0606KQP 6-20X3/8 10,000 1.70•0608KQP 6-20X1/2 10,000 2.06•0610KQP 6-20X5/8 10,000 2.46•0612KQP 6-20X3/4 10,000 2.77•0616KQP 6-20X1 10,000 3.61•0620KQP 6-20X1 1/4 9,000 4.06 •0806KQP 8-18X3/8 10,000 2.77•0808KQP 8-18X1/2 10,000 3.10•0810KQP 8-18X5/8 3,000 3.50•0812KQP 8-18X3/4 3,000 4.05•0816KQP 8-18X1 2,000 5.05•0820KQP 8-18X1 1/4 5,000 5.83•0824KQP 8-18X1 1/2 4,000 7.29•0832KQP 8-18X2 2,000 9.22•0840KQP 8-18X2 1/2 2,000 10.40•0848KQP 8-18X3 2,000 12.40 •1006KQP 10-16X3/8 9,000 4.10•1008KQP 10-16X1/2 8,000 4.401010KQP 10-16X5/8 6,000 4.961012KQP 10-16X3/4 5,000 5.511016KQP 10-16X1 2,000 6.931020KQP 10-16X1 1/4 1,000 7.961024KQP 10-16X1 1/2 1,000 9.421032KQP 10-16X2 2,000 12.561040KQP 10-16X2 1/2 2,000 14.251048KQP 10-16X3 1,000 16.751056KQP 10-16X3 1/2 1,000 19.201064KQP 10-16X4 1,000 21.70

•1208KQP 12-14X1/2 5,000 6.221210KQP 12-14X5/8 5,000 6.711212KQP 12-14X3/4 5,000 8.101216KQP 12-14X1 3,000 9.701220KQP 12-14X1 1/4 3,000 11.451224KQP 12-14X1 1/2 2,000 13.201228KQP 12-14X1 3/4 1,000 14.131232KQP 12-14X2 1,000 15.601240KQP 12-14X2 1/2 1,000 19.171248KQP 12-14X3 750 22.331256KQP 12-14X3 1/2 750 25.501264KQP 12-14X4 750 29.00 •1408KQP 1/4-14X1/2 3,000 9.201412KQP 1/4-14X3/4 3,000 11.501416KQP 1/4-14X1 2,000 12.701420KQP 1/4-14X1 1/4 1,000 15.321424KQP 1/4-14X1 1/2 1,000 18.101428KQP 1/4-14X1 3/4 1,000 19.621432KQP 1/4-14X2 1,000 22.001440KQP 1/4-14X2 1/2 800 26.501448KQP 1/4-14X3 600 31.171456KQP 1/4-14X3 1/2 600 35.601464KQP 1/4-14X4 600 40.00

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



lOasmoro Steel Zinc Plated Steel Zinc Plated

Ctn Wght Qty Lbs/M

2,000 10.19

Part # Size 1232KQWAFM4W 12-24X2

Ctn Wght Part # Size City Lbs/M

1216KQWAFM4W 12-24X1 3,000 9.63

304 Phone: 800-222-9221 Fax: 201-337-2301

I[SOURCE BOOK

8-18X212 2,000 9.50 8-18X3 1,000 11.75 8-18X312 1,000 13.50 8-18X4 900 15.17

10-16X12 8,000 2.50 10-16X518 8,000 3.40 10-16X34 7,000 4.05 10-16X1 5,000 5.20

114-14X1/2 4,000 4.40 1/4-14X3/4 3,000 5.80 114-14X1 2,000 7.90




1040KQRW 10.16X212 2,000 16.70







Items marked with 11" are 1/16" Across the Flats Ctn Wght Ctn Wght

Part # Size Qty Lbs/M Part # Size Qty Lbs/M

.0406KSW 4-24X3/8 10,000 1.21 1024KSW 10-16X112 4,000 9.61

.0408KSW 4-24X1/2 10,000 1.28 1028KSW 10-16X13/4 3,000 10.85 1032KSW 10-16X2 2,000 12.08

.0606KSW 6-20X3/8 10,000 2.35 1048KSW 10-16X3 1,000 16.53

.0608KSW 6-20X1/2 10,000 2.50

.0610KSW 6-20X5/8 10,000 2.80 -1208KSW 12-14X1/2 5,000 6.27

.0612KSW 6-20X3/4 10,000 3.31 1212KSW 12-14X3/4 5,000 7.66

.0616KSW 6-20X1 10,000 3.68 1216KSW 12-14X1 4,000 9.26

.0620KSW 6.20X11/4 8,000 4.43 1232KSW 12-14X2 1,000 15.20

.0624KSW 6.20X112 7,000 5.06 -1408KSW 114-14X1/2 4,000 9.73

.0708KSW 7-19X1/2 10,000 2.77 1412KSW 114-14)(314 3,000 11.62 1416KSW 114-14X1 2,500 13.87

.0806KSW 8-18X3/8 10,000 2.66 ¶141607KSW 14X1 2,500 13.32

.0808KSW 8-18X1/2 10,000 3.30 1420KSW 114-14X1 1/4 2,000 16.00

.0810KSW 8-18X5/8 10,000 3.59 1432KSW 114-14X2 1,000 24.18

.0812KSW 8-18X3/4 10,000 3.90 ¶143207KSW 14X2 1,000 22.58

.0816KSW 8-18X1 8,000 4.70 1440KSW 114-14X212 800 27.40

.0820KSW 8-18X11/4 3,000 6.21 1448KSW 114-14X3 600 30.00

.0824KSW 8-18X112 3,000 6.82

.0832KSW 8-18X2 2,000 8.60 3112KSW 5/16-12X3/4 1,000 20.60

.0840KSW 8-18X212 2,000 10.30 3116KSW 5/16-12X1 1,250 24.70

.0848KSW 8-18X3 1,500 12.58 3120KSW 5/16.12X11/4 700 28.75 3124KSW 5/16.12X112 600 32.63

•1006KSW 10-16X318 9,000 3.65 3132KSW 5/16-12X2 1,000 34.00 •1008KSW 10-16X1/2 8,000 4.80 3148KSW 5/16-12X3 400 56.00 •1010KSW 10-16X518 7,000 5.06 1012KSW 10-16X3/4 6,000 5.69 3716KSW 318-12X1 750 39.33 1016KSW 10-16X1 5,000 7.65




.0840KQRW 8-18X212 3,000 1230

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0808KSWS 8-18X1/2 10,000 3.30 1212KSWS 12-14X3/4 5,000 7.25

.0810KSWS 8-18X5/8 9,000 3.56 1216KSWS 12-14X1 4,000 8.79

.0812KSWS 8-18X3/4 8,000 4.06 1412KSWS 114-14)(314 3,000 11.13

•1008KSWS 10-16X1/2 8,000 4.80 1416KSWS 114-14X1 2,500 13.31 1012KSWS 10-16X3/4 6,000 5.69 1016KSWS 10-16X1 5,000 7.03

Ctn Qty Part # Size Part # Size

Wght Lbs/M

Ctn Wght Qty Lbs/M

Steel Zinc Plated

Steel Zinc Plated



.0606KQFT 6-20X3/8 10,000 1.20

.0608KQFT 6-20X1/2 10,000 1.40

.0612KQFT 6-20X3/4 10,000 2.00

.0616KQFT 6-20X1 7,500 2.80

.0626KQFT 6.20X15/8 5,000 4.43

.0636KQFT 6.20X21/4 3,000 6.17

.0808KQFT 8-18X1/2 9,000 2.10

.0812KQFT 8-18X3/4 8,000 2.90

.0816KQFT 8-18X1 5,000 3.70

.0820KQFT 8-18X11/4 3,000 4.75

.0824KQFT 8-18X112 3,000 6.00

.0832KQFT 8-18X2 2,000 7.38

.0840KQFT

.0848KQFT

.0856KQFT

.0864KQFT

•1008KQFT •1010KQFT 1012KQFT 1016KQFT

-1408KQFT 1412KQFT 1416KQFT

Steel Zinc Plated

ROUND WASHER SQUARE RECESS SELF DRILLING SCREWS


WAFER SQUARE RECESS WITH WINGS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS


HEX WASHER SLOTTED WITH SERRATIONS SELF DRILLING SCREWS


MUM*

SQUARE TRIM HEAD SELF DRILLING SCREWS

For attaching base board or trim through drywall into metal studs Case Hardened to Vickers HV 550-800 (Core Hardness: Vickers HV 270-450)

304 Phone: 800-222-9221 Fax: 201-337-2301


•0606KQFT 6-20X3/8 10,000 1.20•0608KQFT 6-20X1/2 10,000 1.40•0612KQFT 6-20X3/4 10,000 2.00•0616KQFT 6-20X1 7,500 2.80•0626KQFT 6-20X1 5/8 5,000 4.43•0636KQFT 6-20X2 1/4 3,000 6.17 •0808KQFT 8-18X1/2 9,000 2.10•0812KQFT 8-18X3/4 8,000 2.90•0816KQFT 8-18X1 5,000 3.70•0820KQFT 8-18X1 1/4 3,000 4.75•0824KQFT 8-18X1 1/2 3,000 6.00•0832KQFT 8-18X2 2,000 7.38

•0840KQFT 8-18X2 1/2 2,000 9.50•0848KQFT 8-18X3 1,000 11.75•0856KQFT 8-18X3 1/2 1,000 13.50•0864KQFT 8-18X4 900 15.17 •1008KQFT 10-16X1/2 8,000 2.50•1010KQFT 10-16X5/8 8,000 3.401012KQFT 10-16X3/4 7,000 4.051016KQFT 10-16X1 5,000 5.20 •1408KQFT 1/4-14X1/2 4,000 4.401412KQFT 1/4-14X3/4 3,000 5.801416KQFT 1/4-14X1 2,000 7.90

1216KQWAFM4W 12-24X1 3,000 9.63 1232KQWAFM4W 12-24X2 2,000 10.19

•0406KSW 4-24X3/8 10,000 1.21•0408KSW 4-24X1/2 10,000 1.28 •0606KSW 6-20X3/8 10,000 2.35•0608KSW 6-20X1/2 10,000 2.50•0610KSW 6-20X5/8 10,000 2.80•0612KSW 6-20X3/4 10,000 3.31•0616KSW 6-20X1 10,000 3.68•0620KSW 6-20X1 1/4 8,000 4.43•0624KSW 6-20X1 1/2 7,000 5.06 •0708KSW 7-19X1/2 10,000 2.77 •0806KSW 8-18X3/8 10,000 2.66•0808KSW 8-18X1/2 10,000 3.30•0810KSW 8-18X5/8 10,000 3.59•0812KSW 8-18X3/4 10,000 3.90•0816KSW 8-18X1 8,000 4.70•0820KSW 8-18X1 1/4 3,000 6.21•0824KSW 8-18X1 1/2 3,000 6.82•0832KSW 8-18X2 2,000 8.60•0840KSW 8-18X2 1/2 2,000 10.30•0848KSW 8-18X3 1,500 12.58 •1006KSW 10-16X3/8 9,000 3.65•1008KSW 10-16X1/2 8,000 4.80•1010KSW 10-16X5/8 7,000 5.061012KSW 10-16X3/4 6,000 5.691016KSW 10-16X1 5,000 7.65

1024KSW 10-16X1 1/2 4,000 9.611028KSW 10-16X1 3/4 3,000 10.851032KSW 10-16X2 2,000 12.081048KSW 10-16X3 1,000 16.53 •1208KSW 12-14X1/2 5,000 6.271212KSW 12-14X3/4 5,000 7.661216KSW 12-14X1 4,000 9.261232KSW 12-14X2 1,000 15.20 •1408KSW 1/4-14X1/2 4,000 9.731412KSW 1/4-14X3/4 3,000 11.621416KSW 1/4-14X1 2,500 13.87¶141607KSW 14X1 2,500 13.321420KSW 1/4-14X1 1/4 2,000 16.001432KSW 1/4-14X2 1,000 24.18¶143207KSW 14X2 1,000 22.581440KSW 1/4-14X2 1/2 800 27.401448KSW 1/4-14X3 600 30.00 3112KSW 5/16-12X3/4 1,000 20.603116KSW 5/16-12X1 1,250 24.703120KSW 5/16-12X1 1/4 700 28.753124KSW 5/16-12X1 1/2 600 32.633132KSW 5/16-12X2 1,000 34.003148KSW 5/16-12X3 400 56.00 3716KSW 3/8-12X1 750 39.33

•0840KQRW 8-18X2 1/2 3,000 12.30 1040KQRW 10-16X2 1/2 2,000 16.70

NEW!

•0808KSWS 8-18X1/2 10,000 3.30•0810KSWS 8-18X5/8 9,000 3.56•0812KSWS 8-18X3/4 8,000 4.06 •1008KSWS 10-16X1/2 8,000 4.801012KSWS 10-16X3/4 6,000 5.691016KSWS 10-16X1 5,000 7.03

1212KSWS 12-14X3/4 5,000 7.251216KSWS 12-14X1 4,000 8.79 1412KSWS 1/4-14X3/4 3,000 11.131416KSWS 1/4-14X1 2,500 13.31

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




Ctn Wght Qty Lbs/M

311207KSWS 311607KSWS 312007KSWS 312407KSWS 312807KSWS 313207KSWS

3,000 15.06 2,000 16.22 2,000 18.68 1,250 20.72

5116-12X314 1,000 18.64 5116-12X1 1,000 22.13 5116-12X11/4 700 25.75 5116-12X112 600 30.00 5116-12X13/4 600 33.63 5116-12X2 600 37.50




Ctn Wght Qty Lbs/M

2,000 7.00

Part # Size 1012KSWN 10-16X3/4

Ctn Wght Qty Lbs/M

Ctn Wght Qty Lbs/M

5,000 5.90

Part # Size Part # Size 1012KWH 10-16X3N

e-mail: [email protected] www.kanebridge.com 305


HEX WASHER SLOTTED WITH SERRATIONS SELF DRILLING SCREWS

Heads are 1/16" Across the Flats Head Height: 1/4" diam.: .172-.190; 5/16" diam.: .208-.229



Steel Zinc Plated

HEX WASHER SLOTTED WITH SERRATIONS ELF DRILLING SCREWS WITH MACHINE SCREW THREADS


Items marked with "II" are 7/16" Across the Flats

Part # Size Ctn Ilty

.0808KSWSMS 8-32X1/2 10,000

.0810KSWSMS 8-32X5/8 9,000

.0812KSWSMS 8-32X3/4 8,000

.1008KSWSMS 10-24X1/2 8,000 1012KSWSMS 10-24X3/4 5,000 1016KSWSMS 10-24X1 5,000

Ctn Wght Part # Size Qty

1412KSWN 1/4-14X3/4 1,000 13.76 1416KSWN 1/4-14X1 1,000 16.15 1420KSWN 1/4-14X1 1/4 1,000 18.20 1424KSWN 1/4-14X1 1/2 1,000 20.40 1432KSWN 1/4-14X2 1,000 25.07

STEEL ZINC Self-Drilling Screws

Part # Size 141207KSWS 1/4-14X3/4 141607KSWS 1/4-14X1 142007KSWS 1/4-14X1 1/4 142407KSWS 1/4-14X112

Items marked with "*" have #2 point; all


#3 point

Lbs/M Part # Size Ctn Wght Qty Lbs/M

Wght

3.29 a80 4.35

4.42 6.00 7.25

1141207KSWSMS 1141607KSWSMS 1142007KSWSMS 1142407KSWSMS

¶311207KSWSMS 1311607KSWSMS 1312407KSWSMS 1312307KSWSMS 1313207KSWSMS

1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2

5/16-18X3/4 5/16-18X1 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2

Part # Size Ctn Qty


Ctn Ilty

Wght Lbs/M

.0808KFI 8-18X1/2 10,000 2.67 •1408KH 1/4-14X1/2 3,000 8.06

.0812KFI 8-18X3/4 8,000 3.33 1412KH 1/4-14X3/4 3,000 9.30

.0816KFI 8-18X1 6,000 4.20 1416KH 1/4-14X1 2,000 12.00 1420KH 1/4-14X11/4 1,500 14.20

•1008KH 10-16X1/2 8,000 3.85 1424KH 1/4-14X112 1,250 16.36 1012KH 10-16X3/4 5,000 5.00 1428KH 1/4-14X13/4 1,000 18.64 1016KFI 10-16X1 5,000 6.19 1432KH 1/4-14X2 900 20.82 1020KH 10.16X11/4 4,000 7.30 1440KFI 114-14X212 800 25.32 1024KH 10.16X112 3,000 8.60 1028KH 10.16X13/4 3,000 9.90 3116KH 5116-12X1 1,000 22.36 1032KH 10-16X2 2,000 11.13 3124KH 5116.12X112 600 30.10

1216KH 12-14X1 4,000 8.08 1224KH 12-14X1 1/2 2,000 11.31

Steel Zinc Plated

Part # Size 1414KW12 1/4-14X7/8

Ctn Wght Qty Lbs/M

2,000 9.70


Items have #3 point

Steel Zinc Plated

3,000 2,000 2,000 1,250

15.12 17.57 20.24 23.12

1,000 1,000

600 600 600

19.32 22.50 30.88 35.38 38.85

Steel Zinc Plated

HEX WASHER SLOTTED SELF DRILLING SCREWS WITH NEo-EPDM WASHER

Used in metal roofing to create a leak-proof seal Screw is Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

OM&

HEX UNSLOTTED SELF DRILLING SCREWS


1 /4" HEX WASHER UNSLOTTED 141/#12 HEAD SELF DRILLING SCREWS

Based on ASME B18.6.3 & SAE 178 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

HEX WASHER UNSLOTTED HIGH HEAD SELF DRILLING SCREWS

Head Height: .125 - .130; Width Across Flats: .305 - .312 Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)



141207KSWS 1/4-14X3/4 3,000 15.06141607KSWS 1/4-14X1 2,000 16.22142007KSWS 1/4-14X1 1/4 2,000 18.68142407KSWS 1/4-14X1 1/2 1,250 20.72

311207KSWS 5/16-12X3/4 1,000 18.64311607KSWS 5/16-12X1 1,000 22.13312007KSWS 5/16-12X1 1/4 700 25.75312407KSWS 5/16-12X1 1/2 600 30.00312807KSWS 5/16-12X1 3/4 600 33.63313207KSWS 5/16-12X2 600 37.50

•0808KSWSMS 8-32X1/2 10,000 3.29•0810KSWSMS 8-32X5/8 9,000 3.80•0812KSWSMS 8-32X3/4 8,000 4.35 •1008KSWSMS 10-24X1/2 8,000 4.421012KSWSMS 10-24X3/4 5,000 6.001016KSWSMS 10-24X1 5,000 7.25

¶141207KSWSMS 1/4-20X3/4 3,000 15.12¶141607KSWSMS 1/4-20X1 2,000 17.57¶142007KSWSMS 1/4-20X1 1/4 2,000 20.24¶142407KSWSMS 1/4-20X1 1/2 1,250 23.12 ¶311207KSWSMS 5/16-18X3/4 1,000 19.32¶311607KSWSMS 5/16-18X1 1,000 22.50¶312407KSWSMS 5/16-18X1 1/2 600 30.88¶312807KSWSMS 5/16-18X1 3/4 600 35.38¶313207KSWSMS 5/16-18X2 600 38.85

1012KSWN 10-16X3/4 2,000 7.00

1412KSWN 1/4-14X3/4 1,000 13.761416KSWN 1/4-14X1 1,000 16.151420KSWN 1/4-14X1 1/4 1,000 18.201424KSWN 1/4-14X1 1/2 1,000 20.401432KSWN 1/4-14X2 1,000 25.07

•0808KH 8-18X1/2 10,000 2.67•0812KH 8-18X3/4 8,000 3.33•0816KH 8-18X1 6,000 4.20 •1008KH 10-16X1/2 8,000 3.851012KH 10-16X3/4 5,000 5.001016KH 10-16X1 5,000 6.191020KH 10-16X1 1/4 4,000 7.301024KH 10-16X1 1/2 3,000 8.601028KH 10-16X1 3/4 3,000 9.901032KH 10-16X2 2,000 11.13 1216KH 12-14X1 4,000 8.081224KH 12-14X1 1/2 2,000 11.31

•1408KH 1/4-14X1/2 3,000 8.061412KH 1/4-14X3/4 3,000 9.301416KH 1/4-14X1 2,000 12.001420KH 1/4-14X1 1/4 1,500 14.201424KH 1/4-14X1 1/2 1,250 16.361428KH 1/4-14X1 3/4 1,000 18.641432KH 1/4-14X2 900 20.821440KH 1/4-14X2 1/2 800 25.32 3116KH 5/16-12X1 1,000 22.363124KH 5/16-12X1 1/2 600 30.10

1414KW12 1/4-14X7/8 2,000 9.70

1012KWH 10-16X3/4 5,000 5.90

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Part # 1432KW4 1440KW4 1456KW4

1k1-14X2 900 22.00 1/4-14X212 800 26.00 1/4-14X312 800 3550

Steel Zinc Plated

1214KW4 1216KW4 1220KW4

1414KW4 1416KW4 1424KW4

12-14X7A3 12-14X1 12-14X1 1/4

1/4-14X7/8 114-14X1 114-14X1 1/2



Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

0406KW 4-24X3/8 10,000 1.10 •1208KW 12-14X1/2 5,000 6.60 0408KW 4-24X1/2 10,000 130 121010N 12-14X5/8 5,000 7.30 0412KW 4-24X3/4 10,000 1.90 1212KW 12-14X3/4 5,000 8.06 0416KW 4-24X1 10,000 223 1214KW 12-14X7/8 4,000 8.90

1216KW 12-14X1 4,000 9.75 0604KW 6-20X1/4 10,000 2.00 122010N 12-14X11/4 3,000 11.35 0606KW 6-20X3/8 10,000 2.47 1224KW 12-14X112 2,000 13.49 0607KW 6-20X7/16 10,000 250 1228KW 12-14X13/4 2,000 14.20 0608KW 6-20X1/2 10,000 2.63 1232KW 12-14X2 2,000 16.00 0610KW 6-20X5/8 10,000 2.80 124010N 12-14X212 1,000 19.80 0612KW 6-20X3/4 10,000 331 124810N 12-14X3 1,000 23.00 0614KW 6-20X7/8 10,000 333 1256KW 12-14X312 600 26.72 0616KW 6-20X1 10,000 3.68 1264KW 12-14X4 500 31.98 0620KW 6.20X11/4 8,000 454 1272KW 12-14X412 500 35.27 0624KW 6.20X112 7,000 5.07 128010N 12-14X5 500 36.20 0632KW 6-20X2 4,000 6.80 1296KW 12-14X6 400 42.50 0648KW 6-20X3 1,500 927

•1406KW 1/4-14X3/8 4,000 8.70 0708KW 7-19X1/2 10,000 2.77 •1408KW 114-14X1/2 3,000 10.24

•1410KW 1/4-14X5/8 3,000 11.23 0804KW 8-18X1/4 10,000 250 1412KW 1/4-14X3/4 3,000 12.23 0805KW 8-18X5/16 10,000 2.65 1414KW 1/4-14X7/8 2,000 12.60 0806KW 8-18X3/8 10,000 2.80 1416KW 114-14X1 2,000 14.60 0808KW 8-18X1/2 10,000 3.48 1420KW 114-14X11/4 1,500 16.84 0809KW 8-18X9/16 9,000 3.94 1424KW 114-14X112 1,250 19.34 0810KW 8-18X5/8 9,000 3.78 1428KW 114-14X13/4 1,000 21.34 0812KW 8-18X3/4 8,000 4.10 1432KW 114-14X2 900 24.18 0814KW 8-18X7/8 6,000 4.99 1436KW 114-14X21/4 900 25.79 0816KW 8-18X1 6,000 5.01 1440KW 114-14X212 800 27.40 0820KW 8-18X11/4 6,000 621 1444KW 114-14X23/4 900 29.11 0824KW 8-18X112 5,000 726 1448KW 1/4-14X3 800 30.00 0826KW 8-18X15/8 5,000 7.60 1456KW 1/4-14X312 800 35.00 0828KW 8-18X13/4 4,000 8.63 1464KW 1/4-14X4 500 40.08 0832KW 8-18X2 3,000 922 1472KW 1/4-14X412 600 45.33 0836KW 8-18X21/4 2,000 9.68 1480KW 1/4-14X5 500 48.41 0840KW 8-18X212 2,000 1030 1496KW 1/4-14X6 400 59.00 0848KW 8-18X3 800 11.00 14128KW 1/4-14X8 250 78.00 0856KW 8-18X312 1,200 1155 0864KW 8-18X4 600 17.33 3112KW 5/16-12X3/4 1,000 23.00

3116KW 5/16-12X1 1,000 26.00 •1006KW 10-16X3/8 8,000 4.80 3120KW 5/16-12X11/4 700 28.80 •1007KW 10-16X7/16 8,000 4.03 3124KW 5/16-12X112 600 32.20 •1008KW 10-16X1/2 8,000 5.06 3128KW 5/16-12X13/4 600 40.70 101010N 10-16X5/8 6,000 5.33 3132KW 5/16-12X2 600 44.80 101210N 10-16X3/4 5,000 6.66 3136KW 5/16-12X21/4 600 45.11 1016KW 10-16X1 5,000 8.05 314010N 5/16-12X212 600 52.00 102010N 10-16X11/4 4,000 8.37 314810N 5/16-12X3 400 56.00 1024KW 10-16X112 3,000 10.12 3164KW 5/16-12X4 500 73.00 102810N 10-16X13/4 3,000 10.70 318010N 5/16-12X5 400 87.60 103210N 10-16X2 2,000 12.72 3196KW 5/16-12X6 300 103.00 104010N 10-16X212 2,000 14.30 1044KW 10-16X23/4 1,000 16.99 3712KW 3/8-12X3/4 750 38.20 104810N 10-16X3 1,000 17.40 3716KW 318-12X1 750 41.40 1056KW 10-16X312 800 19.80 372010N 3/8-12X11/4 600 49.05 1064KW 10-16X4 500 22.00 3724KW 3/8-12X112 600 53.00 107210N 10-16X412 500 24.50 3728KW 3/8-12X13/4 600 55.11 108010N 10-16X5 500 27.00 3732KW 3/8-12X2 600 65.00 1096KW 10-16X6 400 31.73 374010N 3/8-12X212 600 53.11

3748KW 3/8-12X3 400 89.00 3764KW 318-12X4 300 109.10 3780KW 318-12X5 200 133.00 3796KW 318-12X6 100 161.00


Heads are 1/16" Across the Flats Head Height: 1/4" diam: .172-.190


Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

14120710N 141607KW 14240710N

114-14X3/4 114-14X1 114-14X1 1/2

3,000 2,000 1,250

14.38 16.50 21.13

313207KW 5/16-12X2 600 37.85


3116KW4 5/16-12X1 1,000 25.17 3120KW4 5/16-12X11/4 700 29.00


Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

1024KW5 10-16X112 3,000 9.00 1424KW5 114-14X112 1,250 20.23 1432KW5 114-14X2 900 21.63

1216KW5 12-14X1 4,000 8.60 1440KW5 114-14X212 800 27.40 1220KW5 12-14X11/4 3,000 10.50 1448KW5 1/4-14X3 800 31.00 1224KW5 12-14X112 2,000 14.25 1456KW5 1/4-14X312 800 35.75 1232KW5 12-14X2 2,000 17.10 1464KW5 1/4-14X4 500 41.25 1240KW5 12-14X212 1,000 14.56 1480KW5 1/4-14X5 500 50.00 1248KW5 12-14X3 1,000 24.00 1496KW5 1/4-14X6 400 59.20 1256KW5 12-14X312 600 25.65 1264KW5 12-14X4 500 28.75 3116KW5 5/16-12X1 1,000 25.33

3124KW5 5/16-12X112 600 32.90 3132KW5 5/16-12X2 600 38.75 3140KW5 5/16-12X212 600 46.50 3148KW5 5/16-12X3 400 54.50

Steel Zinc Plated All items have #3 point Steel Zinc Plated

Size Ctn Wght Qty Lbs/M

Steel Zinc Plated


9.50 8.83

10.38

5,000 4,000 3,000

2,000 2,000 1,250

15.00 13.14 20.00



*We






306 Phone: 800-222-9221

Fax: 201-337-2301 306 Phone: 800-222-9221 Fax: 201-337-2301


•0406KW 4-24X3/8 10,000 1.10•0408KW 4-24X1/2 10,000 1.30•0412KW 4-24X3/4 10,000 1.90•0416KW 4-24X1 10,000 2.23 •0604KW 6-20X1/4 10,000 2.00•0606KW 6-20X3/8 10,000 2.47•0607KW 6-20X7/16 10,000 2.50•0608KW 6-20X1/2 10,000 2.63•0610KW 6-20X5/8 10,000 2.80•0612KW 6-20X3/4 10,000 3.31•0614KW 6-20X7/8 10,000 3.33•0616KW 6-20X1 10,000 3.68•0620KW 6-20X1 1/4 8,000 4.54•0624KW 6-20X1 1/2 7,000 5.07•0632KW 6-20X2 4,000 6.80•0648KW 6-20X3 1,500 9.27 •0708KW 7-19X1/2 10,000 2.77 •0804KW 8-18X1/4 10,000 2.50•0805KW 8-18X5/16 10,000 2.65•0806KW 8-18X3/8 10,000 2.80•0808KW 8-18X1/2 10,000 3.48•0809KW 8-18X9/16 9,000 3.94•0810KW 8-18X5/8 9,000 3.78•0812KW 8-18X3/4 8,000 4.10•0814KW 8-18X7/8 6,000 4.99•0816KW 8-18X1 6,000 5.01•0820KW 8-18X1 1/4 6,000 6.21•0824KW 8-18X1 1/2 5,000 7.26•0826KW 8-18X1 5/8 5,000 7.60•0828KW 8-18X1 3/4 4,000 8.63•0832KW 8-18X2 3,000 9.22•0836KW 8-18X2 1/4 2,000 9.68•0840KW 8-18X2 1/2 2,000 10.30•0848KW 8-18X3 800 11.00•0856KW 8-18X3 1/2 1,200 11.55•0864KW 8-18X4 600 17.33 •1006KW 10-16X3/8 8,000 4.80•1007KW 10-16X7/16 8,000 4.03•1008KW 10-16X1/2 8,000 5.061010KW 10-16X5/8 6,000 5.331012KW 10-16X3/4 5,000 6.661016KW 10-16X1 5,000 8.051020KW 10-16X1 1/4 4,000 8.371024KW 10-16X1 1/2 3,000 10.121028KW 10-16X1 3/4 3,000 10.701032KW 10-16X2 2,000 12.721040KW 10-16X2 1/2 2,000 14.301044KW 10-16X2 3/4 1,000 16.991048KW 10-16X3 1,000 17.401056KW 10-16X3 1/2 800 19.801064KW 10-16X4 500 22.001072KW 10-16X4 1/2 500 24.501080KW 10-16X5 500 27.001096KW 10-16X6 400 31.73

•1208KW 12-14X1/2 5,000 6.601210KW 12-14X5/8 5,000 7.301212KW 12-14X3/4 5,000 8.061214KW 12-14X7/8 4,000 8.901216KW 12-14X1 4,000 9.751220KW 12-14X1 1/4 3,000 11.351224KW 12-14X1 1/2 2,000 13.491228KW 12-14X1 3/4 2,000 14.201232KW 12-14X2 2,000 16.001240KW 12-14X2 1/2 1,000 19.801248KW 12-14X3 1,000 23.001256KW 12-14X3 1/2 600 26.721264KW 12-14X4 500 31.981272KW 12-14X4 1/2 500 35.271280KW 12-14X5 500 36.201296KW 12-14X6 400 42.50 •1406KW 1/4-14X3/8 4,000 8.70•1408KW 1/4-14X1/2 3,000 10.24•1410KW 1/4-14X5/8 3,000 11.231412KW 1/4-14X3/4 3,000 12.231414KW 1/4-14X7/8 2,000 12.601416KW 1/4-14X1 2,000 14.601420KW 1/4-14X1 1/4 1,500 16.841424KW 1/4-14X1 1/2 1,250 19.341428KW 1/4-14X1 3/4 1,000 21.341432KW 1/4-14X2 900 24.181436KW 1/4-14X2 1/4 900 25.791440KW 1/4-14X2 1/2 800 27.401444KW 1/4-14X2 3/4 900 29.111448KW 1/4-14X3 800 30.001456KW 1/4-14X3 1/2 800 35.001464KW 1/4-14X4 500 40.081472KW 1/4-14X4 1/2 600 45.331480KW 1/4-14X5 500 48.411496KW 1/4-14X6 400 59.0014128KW 1/4-14X8 250 78.00 3112KW 5/16-12X3/4 1,000 23.003116KW 5/16-12X1 1,000 26.003120KW 5/16-12X1 1/4 700 28.803124KW 5/16-12X1 1/2 600 32.203128KW 5/16-12X1 3/4 600 40.703132KW 5/16-12X2 600 44.803136KW 5/16-12X2 1/4 600 45.113140KW 5/16-12X2 1/2 600 52.003148KW 5/16-12X3 400 56.003164KW 5/16-12X4 500 73.003180KW 5/16-12X5 400 87.603196KW 5/16-12X6 300 103.00 3712KW 3/8-12X3/4 750 38.203716KW 3/8-12X1 750 41.403720KW 3/8-12X1 1/4 600 49.053724KW 3/8-12X1 1/2 600 53.003728KW 3/8-12X1 3/4 600 55.113732KW 3/8-12X2 600 65.003740KW 3/8-12X2 1/2 600 53.113748KW 3/8-12X3 400 89.003764KW 3/8-12X4 300 109.103780KW 3/8-12X5 200 133.003796KW 3/8-12X6 100 161.00

141207KW 1/4-14X3/4 3,000 14.38141607KW 1/4-14X1 2,000 16.50142407KW 1/4-14X1 1/2 1,250 21.13

313207KW 5/16-12X2 600 37.85

1214KW4 12-14X7/8 5,000 9.501216KW4 12-14X1 4,000 8.831220KW4 12-14X1 1/4 3,000 10.38 1414KW4 1/4-14X7/8 2,000 15.001416KW4 1/4-14X1 2,000 13.141424KW4 1/4-14X1 1/2 1,250 20.00

1432KW4 1/4-14X2 900 22.001440KW4 1/4-14X2 1/2 800 26.001456KW4 1/4-14X3 1/2 800 35.50 3116KW4 5/16-12X1 1,000 25.173120KW4 5/16-12X1 1/4 700 29.00

1024KW5 10-16X1 1/2 3,000 9.00 1216KW5 12-14X1 4,000 8.601220KW5 12-14X1 1/4 3,000 10.501224KW5 12-14X1 1/2 2,000 14.251232KW5 12-14X2 2,000 17.101240KW5 12-14X2 1/2 1,000 14.561248KW5 12-14X3 1,000 24.001256KW5 12-14X3 1/2 600 25.651264KW5 12-14X4 500 28.75

1424KW5 1/4-14X1 1/2 1,250 20.231432KW5 1/4-14X2 900 21.631440KW5 1/4-14X2 1/2 800 27.401448KW5 1/4-14X3 800 31.001456KW5 1/4-14X3 1/2 800 35.751464KW5 1/4-14X4 500 41.251480KW5 1/4-14X5 500 50.001496KW5 1/4-14X6 400 59.20 3116KW5 5/16-12X1 1,000 25.333124KW5 5/16-12X1 1/2 600 32.903132KW5 5/16-12X2 600 38.753140KW5 5/16-12X2 1/2 600 46.503148KW5 5/16-12X3 400 54.50

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




Ctn Wght Qty Lbs/M

5,000 8.90

Part # Size 1432KWMS4W 114-20X2 900 24.70

www.kanebridge.com 307 e-mail: [email protected]


others have #3 point Steel Zinc Plated Steel Zinc Plated All items have #5 point

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

•1008KWMS 10-24X1/2 1,000 5.28 .1408KWMS 1M-20X1/2 2,000 10.25 1012KWMS 10-24X3/4 5,000 6.66 1412KWMS 1M-20X3/4 2,000 12.33 101610NMS 10-24X1 5,000 8.05 1416KWMS 1/4-20X1 1,500 15.00 1024KWMS 10-24X112 3,000 10.00 1424KWMS 1/4-20X1 12 1,250 19.83

1432KWMS 1/4-20X2 1,000 25.00 1108KWMS 10-32X1/2 4,000 4.86 1464KWMS 1/4-20X4 500 45.25 1112KWMS 10-32X3/4 3,500 6.58 1116KWMS 10-32X1 3,500 7.90 1548KWMS 1/4-28X3 1,000 31.70

1564KWMS 1/4-28X4 700 40.50 1212KWMS 12-24X3/4 3,000 8.06 1580KWMS 1/4-28X5 500 50.70 1216KWMS 12-24X1 3,000 9.64 1596KWMS 1/4-28X6 350 60.00 1220KWMS 12-24X1 114 3,000 11.35 15128KWMS 1/4-28X8 150 78.00 1224KWMS 12-24X112 2,000 13.49

3112KWMS 5/16-18X3/4 700 23.67 3116KWMS 5/16-18X1 700 27.50 3120KWMS 5/16-18X1 1/4 500 31.25 3124KWMS 5/16-18X1 1/2 500 35.70 3132KWMS 5/16-18X2 400 43.80

Part # Size Ctn Qty

Wght Lbs/M Part #

Ctn Qty

Wght Lbs/M

101210NMS5 10-24X3/4 5,000 5.69 141610NMS5 1/4-20X1 1,000 14.47 1424KWMS5 1/4-20X1 1/2 1,000 18.67

121610NMS5 12-24X1 3,000 9.36 1432KWMS5 1/4-20X2 1,000 24.00 1220KWMS5 12-24X1 1/4 3,000 10.50 1440KWMS5 1M-20X2 1/2 500 29.25 1224KWMS5 12-24X1 1/2 2,000 13.50 1448KWMS5 1M-20X3 500 34.50 1232KWMS5 12-24X2 2,000 16.70 1240KWMS5 12-24X212 1,000 20.60 1248KWMS5 12-24X3 1,000 24.63

111411w- Items marked with "1"

have 7/16" A.F. dimensions

Items marked with "*" have #2 point; all others have #3 point

Steel Zinc Plated All items have #4 point Steel Zinc Plated

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

1212KWMS4 12-24X3/4 5,000 8.00 1420KWMS4 1/4-20X1 1/4 1,500 16.63 121410NMS4 12-24X7/8 4,000 9.50 1424KWMS4 1/4-20X1 1/2 1,000 18.90 122010NMS4 12-24X1 1/4 3,000 11.06 1428KWMS4 1/4-20X1 3/4 1,000 21.25

1432KWMS4 1/4-20X2 1,000 23.88


Part # Ctn

Size Qty Wght Lbs/M Part # Size

Ctn Qty

Wght Lbs/M

0608KWS 6-20X1/2 10,000 2.63 1408KWS 1/4-14X1/2 3,000 934 0610KWS 6-20X5/8 10,000 2.80 1410KWS 1/4-14X5/8 3,000 10.86

1412KWS 1/4-14X3/4 3,000 11.83 0806KWS 8-18X3/8 10,000 2.80 ¶141207KWS 1/4-14X3/4 2,500 12.23 0808KWS 8-18X1/2 10,000 348 1416KWS 1/4-14X1 2,000 1334 0809KWS 8-18X9/16 7,000 3.80 ¶141607KWS 1/4-14X1 2,000 14.60 081014KWS 8-18)(5/8 (1/4AF) 5,000 338 1420KWS 1/4-14X1 1/4 1,500 16.20 0812KWS 8-18X3/4 6,000 4.11 1142007KWS 1/4-14X1 1/4 2,000 19.66 081214KWS 8-18X3/4 (1/4AF) 5,000 4.10 1424KWS 1/4-14X112 1,250 18.40 0816KWS 8-18X1 6,000 5.01 ¶142407KWS 1/4-14X112 1,250 21.00 0820KWS 8-18X1 1/4 3,030 5.95 1428KWS 1/4-14X1 3/4 1,000 20.67 0824KWS 8-18X1 1/2 3,000 688 14321(WS 1/4-14X2 1,000 22.75 0832KWS 8-18X2 2,500 8.75 1440KWS 1/4-14X2 12 1,000 27.65

1448KWS 1/4-14X3 1,000 31.75 •1008KWS 10-16X1/2 8,030 4.61 1464KWS 1/4-14X4 500 42.25 1012KWS 10-16X3/4 5,000 5.83 101231KWS 10-16X3/4 (5/16 AF)5,C00 6.66 3112KWS 5/16-12X3/4 1,000 22.20 101631KWS 10-16X1 (5/16AF) 5,000 305 ¶311207KWS 5/16-12X3/4 1,000 18.66 1016KWS 10-16X1 5,000 7.45 3116KWS 5/16-12X1 1,000 2538 1020KWS 10-16X1 1/4 2,500 823 ¶311607KWS 5/16-12X1 1,000 2230 1024KWS 10.16X112 2,000 9.48 3120KWS 5/16-12X1 1/4 700 29.90 1032KWS 10-16X2 2,000 12.00 1312007KWS 5/16-12X1 1/4 700 26.75

3124KWS 5/16-12X1 1/2 600 3150 1208KWS 12-14X1/2 5,000 6.15 ¶312407KWS 5/16-12X1 1/2 600 30.75 1210KWS 12-14X5/8 5,000 6.63 ¶312807KWS 5/16-12X1 3/4 600 34.50 1212KWS 12-14X3/4 5,000 7.43 31321(WS 5/16-12X2 600 40.90 1214KWS 12-14X7/8 4,000 8.30 ¶313207KWS 5/16-12X2 600 38.25 1216KWS 12-14X1 2,000 9.23 1264KWS 12-14X4 500 28.60

Steel Zinc Plated

Size 1214KWMS4W 12-24X7/8







SERRATED HEX WASHER UNSLOTTED SELF DRILLING SCREWS


HEX WASHER UNSLOTTED WITH WING SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads manufactured to ASME B18.6.3 dimensions



1214KWMS4W 12-24X7/8 5,000 8.90

1432KWMS4W 1/4-20X2 900 24.70

•1008KWMS 10-24X1/2 1,000 5.281012KWMS 10-24X3/4 5,000 6.661016KWMS 10-24X1 5,000 8.051024KWMS 10-24X1 1/2 3,000 10.00 1108KWMS 10-32X1/2 4,000 4.861112KWMS 10-32X3/4 3,500 6.581116KWMS 10-32X1 3,500 7.90 1212KWMS 12-24X3/4 3,000 8.061216KWMS 12-24X1 3,000 9.641220KWMS 12-24X1 1/4 3,000 11.351224KWMS 12-24X1 1/2 2,000 13.49

•1408KWMS 1/4-20X1/2 2,000 10.251412KWMS 1/4-20X3/4 2,000 12.331416KWMS 1/4-20X1 1,500 15.001424KWMS 1/4-20X1 1/2 1,250 19.831432KWMS 1/4-20X2 1,000 25.001464KWMS 1/4-20X4 500 45.25 1548KWMS 1/4-28X3 1,000 31.701564KWMS 1/4-28X4 700 40.501580KWMS 1/4-28X5 500 50.701596KWMS 1/4-28X6 350 60.0015128KWMS 1/4-28X8 150 78.00 3112KWMS 5/16-18X3/4 700 23.673116KWMS 5/16-18X1 700 27.503120KWMS 5/16-18X1 1/4 500 31.253124KWMS 5/16-18X1 1/2 500 35.703132KWMS 5/16-18X2 400 43.80

1212KWMS4 12-24X3/4 5,000 8.001214KWMS4 12-24X7/8 4,000 9.501220KWMS4 12-24X1 1/4 3,000 11.06

1420KWMS4 1/4-20X1 1/4 1,500 16.631424KWMS4 1/4-20X1 1/2 1,000 18.901428KWMS4 1/4-20X1 3/4 1,000 21.251432KWMS4 1/4-20X2 1,000 23.88

1012KWMS5 10-24X3/4 5,000 5.69 1216KWMS5 12-24X1 3,000 9.361220KWMS5 12-24X1 1/4 3,000 10.501224KWMS5 12-24X1 1/2 2,000 13.501232KWMS5 12-24X2 2,000 16.701240KWMS5 12-24X2 1/2 1,000 20.601248KWMS5 12-24X3 1,000 24.63

1416KWMS5 1/4-20X1 1,000 14.471424KWMS5 1/4-20X1 1/2 1,000 18.671432KWMS5 1/4-20X2 1,000 24.001440KWMS5 1/4-20X2 1/2 500 29.251448KWMS5 1/4-20X3 500 34.50

•0608KWS 6-20X1/2 10,000 2.63•0610KWS 6-20X5/8 10,000 2.80 •0806KWS 8-18X3/8 10,000 2.80•0808KWS 8-18X1/2 10,000 3.48•0809KWS 8-18X9/16 7,000 3.80•081014KWS 8-18X5/8 (1/4 A/F) 5,000 3.78•0812KWS 8-18X3/4 6,000 4.11•081214KWS 8-18X3/4 (1/4 A/F) 5,000 4.10•0816KWS 8-18X1 6,000 5.01•0820KWS 8-18X1 1/4 3,000 5.95•0824KWS 8-18X1 1/2 3,000 6.88•0832KWS 8-18X2 2,500 8.75 •1008KWS 10-16X1/2 8,000 4.611012KWS 10-16X3/4 5,000 5.83101231KWS 10-16X3/4 (5/16 A/F) 5,000 6.66101631KWS 10-16X1 (5/16 A/F) 5,000 8.051016KWS 10-16X1 5,000 7.451020KWS 10-16X1 1/4 2,500 8.231024KWS 10-16X1 1/2 2,000 9.481032KWS 10-16X2 2,000 12.00 1208KWS 12-14X1/2 5,000 6.151210KWS 12-14X5/8 5,000 6.631212KWS 12-14X3/4 5,000 7.431214KWS 12-14X7/8 4,000 8.301216KWS 12-14X1 2,000 9.231264KWS 12-14X4 500 28.60

1408KWS 1/4-14X1/2 3,000 9.941410KWS 1/4-14X5/8 3,000 10.861412KWS 1/4-14X3/4 3,000 11.83¶141207KWS 1/4-14X3/4 2,500 12.231416KWS 1/4-14X1 2,000 13.94¶141607KWS 1/4-14X1 2,000 14.601420KWS 1/4-14X1 1/4 1,500 16.20¶142007KWS 1/4-14X1 1/4 2,000 19.661424KWS 1/4-14X1 1/2 1,250 18.40¶142407KWS 1/4-14X1 1/2 1,250 21.001428KWS 1/4-14X1 3/4 1,000 20.671432KWS 1/4-14X2 1,000 22.751440KWS 1/4-14X2 1/2 1,000 27.651448KWS 1/4-14X3 1,000 31.751464KWS 1/4-14X4 500 42.25 3112KWS 5/16-12X3/4 1,000 22.20¶311207KWS 5/16-12X3/4 1,000 18.663116KWS 5/16-12X1 1,000 25.38¶311607KWS 5/16-12X1 1,000 22.303120KWS 5/16-12X1 1/4 700 29.90¶312007KWS 5/16-12X1 1/4 700 26.753124KWS 5/16-12X1 1/2 600 33.50¶312407KWS 5/16-12X1 1/2 600 30.75¶312807KWS 5/16-12X1 3/4 600 34.503132KWS 5/16-12X2 600 40.90¶313207KWS 5/16-12X2 600 38.25

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Steel Zinc Plated All items have #4 point Items marked with "."


Steel Zinc Plated


311207KWS4 5/16-12X3/4 1,200 19.45 312407KWS4 5/16-12X112 800 32.20 311607KWS4 5/16-12X1 1,200 26.00 313207KWS4 5/16-12X2 600 39.50 312007KWS4 5/16-12X1 1/4 1,000 28.80

Items have #3 point

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

•141007KWSMS 1/4-20X5/8 3,000 14.50 311207KWSMS 5/16-18X3/4 1,000 19.60 -141207KWSMS 1/4-20X3/4 2,500 12.23 311607KWSMS 5/16-18X1 1,000 23.30 ,141607KWSMS2 114-20X1 2,500 17.38 312007KWSMS 5/16-18X1 1/4 700 27.67 141607KWSMS 1/4-20X1 2,500 14.60 312407KWSMS 5/16-18X1 1/2 600 31.75 •142007KWSMS 1/4-20X11/4 2,000 19.63 312807KWSMS 5/16-18X1 3/4 600 35.78 -142407KWSMS 1/4-20X112 1,250 23.17 313207KWSMS 5/16-18X2 600 39.67

Steel Zinc Plated with Red Painted Head


Steel Zinc Plated



1012KWFIS 10-16X314 5,000 7.48


141207KWSMSR 1/4-20X3/4

Ctn Wght (By Lbs/M

2,500 12.23


Part # Size Ctn Qty


Ctn Qty


Ctn Qty

.0808KWSMS (181010NSMS .0812KWSMS

•1008KWSMS 1010KWSMS 1012KWSMS 1016KWSMS

8-32X1/2 8-32X5/8 8-32X3/4

10-24X1/2 10-24X518 10-24X3/4 10-24X1

10,000 9,000 8,000

8,000 6,000 5,000 5,000

3.54 4.13 4.60

4.85 5.22 6.15 7.50

1112KWSMS

1210KWSMS 1264KWSMS

1412KWSMS 1414KWSMS 1416KWSMS 1424KWSMS

10-32X3/4

12-24X518 12-24X4

1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 12

5,000

5,000 500

3,000 2,000 2,000 1,250

6.15

7.14 33.00

12.08 13.40 14.63 20.20

1424KWSMS4W 1/4-20X1 1/2 1,250

Part # Size Ctn Wght Illy Lbs/M

Wght Lbs/M

20.30

I[SOURCE BOOK

#4 POINT SERRATED HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH SELF TAPPING SCREW THREADS

Heads: 7/16" A.F. & 7/32" Height / Washer Diam.: 19/32" Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)


SERRATED HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads are 7/16" Across the Flats Head Height: 1/4" diam: .172-.190; 5/16" diam: .208-.229


SERRATED HEX WASHER UNSLOTTED HIGH HEAD SELF DRILLING SCREWS

Head Height: .125 - .130; Width Across Flats: .305 - .312 Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

SERRATED HEX WASHER UNSLOT REDPAINTED HEAD SELF DRILLING SCREWS WITH MACHINE SCREW THREADS

Heads are 7/16" Across the Flats / Head Height: .172-.190 Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

Steel Zinc Plated Steel Zinc Plated Items marked with "•"





• 4 POINT SERRATED HEX WASH UNSLOT WITH WINGS SELF DRILLING SCREWS WITH MACHINE SCREW THREADS


Hex Washer Head Sealing Screws with Neo-EPDM Washers are

also available in 18-8 & 410 Stainless-page 131.

308 Phone: 800-222-9221

Fax: 201-337-2301 308 Phone: 800-222-9221 Fax: 201-337-2301


311207KWS4 5/16-12X3/4 1,200 19.45311607KWS4 5/16-12X1 1,200 26.00312007KWS4 5/16-12X1 1/4 1,000 28.80

312407KWS4 5/16-12X1 1/2 800 32.20313207KWS4 5/16-12X2 600 39.50

•0808KWSMS 8-32X1/2 10,000 3.54•0810KWSMS 8-32X5/8 9,000 4.13•0812KWSMS 8-32X3/4 8,000 4.60 •1008KWSMS 10-24X1/2 8,000 4.851010KWSMS 10-24X5/8 6,000 5.221012KWSMS 10-24X3/4 5,000 6.151016KWSMS 10-24X1 5,000 7.50

1112KWSMS 10-32X3/4 5,000 6.15 1210KWSMS 12-24X5/8 5,000 7.141264KWSMS 12-24X4 500 33.00 1412KWSMS 1/4-20X3/4 3,000 12.081414KWSMS 1/4-20X7/8 2,000 13.401416KWSMS 1/4-20X1 2,000 14.631424KWSMS 1/4-20X1 1/2 1,250 20.20

•141007KWSMS 1/4-20X5/8 3,000 14.50•141207KWSMS 1/4-20X3/4 2,500 12.23•141607KWSMS2 1/4-20X1 2,500 17.38 141607KWSMS 1/4-20X1 2,500 14.60•142007KWSMS 1/4-20X1 1/4 2,000 19.63•142407KWSMS 1/4-20X1 1/2 1,250 23.17

311207KWSMS 5/16-18X3/4 1,000 19.60311607KWSMS 5/16-18X1 1,000 23.30312007KWSMS 5/16-18X1 1/4 700 27.67312407KWSMS 5/16-18X1 1/2 600 31.75312807KWSMS 5/16-18X1 3/4 600 35.78313207KWSMS 5/16-18X2 600 39.67

141207KWSMSR 1/4-20X3/4 2,500 12.23

1424KWSMS4W 1/4-20X1 1/2 1,250 20.30

1012KWHS 10-16X3/4 5,000 7.48

Hex Washer Head Sealing Screws with Neo-EPDM Washers are

also available in 18-8 & 410 Stainless—page 131.

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO





others have #3 point halramw- Steel Zinc Plated Steel Zinc Plated All items have #5 point

HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH NEo-EPDM WASHER

#5 POINT HEX WASHER UNSLOTTED SELF DRILLING SCREWS WITH NEo-EPDM WASHER


Screw is Case Hardened (Core Hardness:

to Rockwell C52 - 58 Rockwell C32-40)

Part # Size Ctn Qty


Ctn Qty


Ctn Qty


Ctn City

Wght Lbs/M

0808KWN 8-18X1/2 4,000 4.92 1408KWN 114-14X1/2 1,000 1220KWN5 12-14X1 1/4 1,500 12.17 1232KWN5 12-14X2 1,000 17.00 10.24 .0810KWN 8-18X518 3,000 5.33 1412KWN 114-14X3/4 1,000 15.00 1224KWN5 12-14X1 1/2 1,500 13.80 1248KWN5 12-14X3 750 24.15 0812KWN 8-18X3/4 2,000 7.00 1414KWN 114-14X7/8 1,000 15.75 .0816KWN 8-18X1 2,000 8.00 1416KWN 114-14X1 1,000 17.60 0820KWN 8-18X11/4 2,000 9.00 1420KWN 114-14X1 1/4 1,000 20.00 0824KWN 8-18X1 1/2 2,000 10.00 1424KWN 114-14X1 1/2 1,000 22.50 0832KWN 8-18X2 2,000 12.00 1428KWN 114-14X1 3/4 1,000 23.25

1432KWN 1/4-14X2 1,000 27.33 •1008KWN 10-16X12 2,000 5.06 1440KWN 1/4-14X212 750 33.00 1010KWN 10-16X518 2,000 8.00 1448KWN 1/4-14X3 500 39.00 1012KWN 10-16X34 2,000 8.30 1456KWN 1/4-14X312 500 40.08 1014KWN 10-16X7A3 2,000 7.80 1464KWN 1/4-14X4 300 43.75 1016KWN 10-16X1 2,000 10.67 1480KWN 1/4-14X5 200 53.00 1020KWN 10-16X1 1/4 2,000 12.00 1496KWN 1/4-14X6 100 61.50 1024KWN 10-16X1 1/2 2,000 13.00 1032KWN 10-16X2 1,500 15.33 3112KWN 5/16-12X3/4 1,000 26.30 1040KWN 10.16X212 1,250 16.10 3116KWN 5/16-12X1 1,000 26.00 1048KWN 10-16X3 1,000 18.65 3120KWN 5/16-12X11/4 700 28.80

3124KWN 5/16-12X112 600 37.50 1212KWN 12-14X3/4 2,000 12.33 3132KWN 5/16-12X2 600 45.33 1214KWNR 12-24X7/8 1,500 13.00 3140KWN 5/16-12X212 600 52.83 1216KWN 12-14X1 1,500 14.00 3148KWN 5/16-12X3 300 55.00 1220KWN 12-14X1 1/4 1,500 16.00 1220KWNR 12-24X1 1/4 1,500 16.00 3708KWN 318-12X1/2 1,000 28.00 1224KWN 12-14X1 1/2 1,500 17.50 3712KWN 318X12-3/4 750 38.20 1232KWN 12-14X2 1,000 22.67 3716KWN 318-12X1 750 41.40 1240KWN 12-14X212 750 33.00 3724KWN 318-12X112 600 59.00 1248KWN 12-14X3 750 25.17 1264KWN 12-14X4 500 31.75

Product Specifications for all Kanebridge Self-Drilling Screws are

available in the Online Fastener Specification Guide at

www.kanebridge.com.



•0808KWN 8-18X1/2 4,000 4.92•0810KWN 8-18X5/8 3,000 5.33•0812KWN 8-18X3/4 2,000 7.00•0816KWN 8-18X1 2,000 8.00•0820KWN 8-18X1 1/4 2,000 9.00•0824KWN 8-18X1 1/2 2,000 10.00•0832KWN 8-18X2 2,000 12.00 •1008KWN 10-16X1/2 2,000 5.061010KWN 10-16X5/8 2,000 8.001012KWN 10-16X3/4 2,000 8.301014KWN 10-16X7/8 2,000 7.801016KWN 10-16X1 2,000 10.671020KWN 10-16X1 1/4 2,000 12.001024KWN 10-16X1 1/2 2,000 13.001032KWN 10-16X2 1,500 15.331040KWN 10-16X2 1/2 1,250 16.101048KWN 10-16X3 1,000 18.65 1212KWN 12-14X3/4 2,000 12.331214KWNR 12-24X7/8 1,500 13.001216KWN 12-14X1 1,500 14.001220KWN 12-14X1 1/4 1,500 16.001220KWNR 12-24X1 1/4 1,500 16.001224KWN 12-14X1 1/2 1,500 17.501232KWN 12-14X2 1,000 22.671240KWN 12-14X2 1/2 750 33.001248KWN 12-14X3 750 25.171264KWN 12-14X4 500 31.75

1408KWN 1/4-14X1/2 1,000 10.241412KWN 1/4-14X3/4 1,000 15.001414KWN 1/4-14X7/8 1,000 15.751416KWN 1/4-14X1 1,000 17.601420KWN 1/4-14X1 1/4 1,000 20.001424KWN 1/4-14X1 1/2 1,000 22.501428KWN 1/4-14X1 3/4 1,000 23.251432KWN 1/4-14X2 1,000 27.331440KWN 1/4-14X2 1/2 750 33.001448KWN 1/4-14X3 500 39.001456KWN 1/4-14X3 1/2 500 40.081464KWN 1/4-14X4 300 43.751480KWN 1/4-14X5 200 53.001496KWN 1/4-14X6 100 61.50 3112KWN 5/16-12X3/4 1,000 26.303116KWN 5/16-12X1 1,000 26.003120KWN 5/16-12X1 1/4 700 28.803124KWN 5/16-12X1 1/2 600 37.503132KWN 5/16-12X2 600 45.333140KWN 5/16-12X2 1/2 600 52.833148KWN 5/16-12X3 300 55.00 3708KWN 3/8-12X1/2 1,000 28.003712KWN 3/8X12-3/4 750 38.203716KWN 3/8-12X1 750 41.403724KWN 3/8-12X1 1/2 600 59.00

1220KWN5 12-14X1 1/4 1,500 12.171224KWN5 12-14X1 1/2 1,500 13.80

1232KWN5 12-14X2 1,000 17.001248KWN5 12-14X3 750 24.15

Product Specifications for all Kanebridge Self-Drilling Screws are

available in the Online Fastener Specification Guide at

www.kanebridge.com.

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



402 Phone: 888-222-9221 Fax: 201-337-2301



Ctn Wght Qty Lbs/M


Steel Black Oxide Items marked with "•"


Steel Black Oxide Items marked with "•"


I Part # Size 1016KPWB 10-16X1 4,000 6.60 .0810KPWB 8-18X518 10,000 3.40 1412KW410B 114-14X3/4 2,000 11.60

1416KW410B 114-14X1 2,000 13.60





Part # Size Ctn Qty

.0808KW410B 8-18X1/2 5,000

.0812KW410B 8-18X3/4 5,000

•1008KW410B 10-16X1/2 4,000 1012KW410B 10-16X3/4 4,000

Wght Lbs/M

3.20 4.10

4.70 5.80







I[SOURCE BOOK

Black Oxide over 410 Stainless Steel


Part # Size Ctn City


Ctn Qty

Wght Lbs/M

.0606KPFB 6-20X3/8 10,000 1.46 1016KPFB 10-16X1 6,000 5.96

.0608KPFB 6-20X1/2 10,000 1.77 1020KPFB 10-16X11/4 5,000 6.85 1024KPFB 10-16X112 4,000 8.10

.0808KPFB 8-18X1/2 10,000 2.67

.0812KPFB 8-18X3/4 10,000 3.50 1216KPFB 12-14X1 4,000 9.70

.0816KPFB 8-18X1 8,000 3.79 1412KPFB 114-14X3/4 3,000 9.78

•1008KPFB 10-16X1/2 10,000 3.66 1416KPFB 114-14X1 3,000 11.68 1012KPFB 10-16X3/4 8,000 4.13 1420KPFB 114-14X1 1/4 2,000 13.47

1424KPFB 114-14X1 1/2 2,000 15.47 1432KPFB 114-14X2 1,000 18.50 1440KPFB 114-14X212 1,000 25.00


3.61 4.73 5.72 6.60


1012KPOB 1016KPOB 1020KPOB

10-16X3/4 7,000 5.19 10-16X1 5,000 6.13 10.16X11/4 4,000 8.00


others have #3 point Steel Black Oxide

.0812KPOB 8-18X3/4 10,000

.0816KPOB 8-18X1 7,000

.0820KPOB 8-18X11/4 5,000

.0824KP0B 8-18X112 4,000

402 Phone: 888-222-9221 Fax: 201-337-2301


•0812KPOB 8-18X3/4 10,000 3.61•0816KPOB 8-18X1 7,000 4.73•0820KPOB 8-18X1 1/4 5,000 5.72•0824KPOB 8-18X1 1/2 4,000 6.60

1012KPOB 10-16X3/4 7,000 5.191016KPOB 10-16X1 5,000 6.131020KPOB 10-16X1 1/4 4,000 8.00

•0606KPFB 6-20X3/8 10,000 1.46•0608KPFB 6-20X1/2 10,000 1.77 •0808KPFB 8-18X1/2 10,000 2.67•0812KPFB 8-18X3/4 10,000 3.50•0816KPFB 8-18X1 8,000 3.79 •1008KPFB 10-16X1/2 10,000 3.661012KPFB 10-16X3/4 8,000 4.13

1016KPFB 10-16X1 6,000 5.961020KPFB 10-16X1 1/4 5,000 6.851024KPFB 10-16X1 1/2 4,000 8.10 1216KPFB 12-14X1 4,000 9.70 1412KPFB 1/4-14X3/4 3,000 9.781416KPFB 1/4-14X1 3,000 11.681420KPFB 1/4-14X1 1/4 2,000 13.471424KPFB 1/4-14X1 1/2 2,000 15.471432KPFB 1/4-14X2 1,000 18.501440KPFB 1/4-14X2 1/2 1,000 25.00

•0808KW410B 8-18X1/2 5,000 3.20•0812KW410B 8-18X3/4 5,000 4.10 •1008KW410B 10-16X1/2 4,000 4.701012KW410B 10-16X3/4 4,000 5.80

1412KW410B 1/4-14X3/4 2,000 11.601416KW410B 1/4-14X1 2,000 13.60

•0810KPWB 8-18X5/8 10,000 3.40

1016KPWB 10-16X1 4,000 6.60

NEW! NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO





Ctn Wght Part # Size (fly Lbs/M

.0608KQPB 6-20X1/2 10,000 2.08

.0810KQPB 8-18X518 3,000 3.46

.0812KQPB 8-18X3/4 3,000 4.00

.0816KQPB 8-18X1 2,000 4.85

.0824KQPB 8-18X112 4,000 6.60

Ctn Wght Qty Lbs/M

10-16X1/2 8,000 4.64 10-16X1 2,000 6.86

10.16X11/4 1,000 7.73 10.16X112 1,000 9.25

1224KQPB 12-14X1 1/2 2,000 12.20

Part # •1008KQPB 1016KQPB 1020KQPB 1024KQPB

Size


others have #3 point Steel Black Oxide

Return to Table of Contents STEEL & SS BLACK OXIDE Self-Drilling Screws

Steel Black Oxide Steel Black Oxide Items marked with "."


taimuri. Items marked with "*"


PAN HILLIPS SELF DRILLING SCREWS




n_s 11. Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0408KPPB 4-24X1/2 10,000 1.14 .0832KPPB 8-18X2 2,000 9.22 .0840KPPB 8-18X212 2,000 11.26

(1606KPPB 6-20X3/8 10,000 1.69 .0848KPPB 8-18X3 2,000 11.97 .0608KPPB 6-20X1/2 10,000 2.06 .0610KPPB 6-20X5/8 10,000 2.28 •1008KPPB 10-16X1/2 8,000 4.40 .0612KPPB 6-20X3/4 10,000 2.77 1010KPPB 10-16X5/8 8,000 4.96 .0616KPPB 6-20X1 10,000 3.19 1012KPPB 10-16X3/4 7,000 5.51 .0620KPPB 6.20X11/4 9,000 3.66 1016KPPB 10-16X1 5,000 6.93 .0624KPPB 6.20X112 8,000 4.54 1020KPPB 10.16X11/4 4,000 7.96

1032KPPB 10-16X2 2,000 12.56 .0707KPPB 7-19X7/16 10,000 2.27 1064KPPB 10-16X4 1,000 22.30

.0806KPPB 8-18X3/8 10,000 2.96 1212KPPB 12-14X3/4 5,000 8.10

.0808KPPB 8-18X1/2 10,000 3.10

.0810KPPB 8-18X5/8 10,000 3.50 -1408KPPB 114-14X12 3,000 9.12

.0812KPPB 8-18X3/4 8,000 4.05 1412KPPB 114-14X34 3,000 11.50

.0816KPPB 8-18X1 6,000 5.05 1420KPPB 114-14X1 1/4 1,000 15.50

.0820KPPB 8-18X11/4 5,000 5.90

.0824KPPB 8-18X112 4,000 7.29


.0608KWB 6-20X1/2 10,000 2.63

.0808KWB 8-18X1/2 10,000 3.32

.0810KWB 8-18X518 9,000 3.79 O812KWB 8-18X3/4 8,000 4.16 .08161(WB 8-18X1 6,000 5.01 .0820KWB 8-18X11/4 2,000 6.21 O824KWB 8-18X112 2,000 7.26 O828KWB 8-18X13/4 2,000 8.63

•1006KWB 10-16X3/13 8,000 4.80 •1008KWB 10-16X12 8,000 4.78 1010KWB 10-16X5/8 7,000 5.03 1012I(WB 10-16X34 6,000 5.85 1016I(WB 10-16X1 5,000 8.05 1020I(WB 10-16X1 1/4 1,000 8.37 1024KWB 10-16X1 1/2 1,000 10.12 1028KWB 10.16X13/4 1,000 10.70 1032KWB 10-16X2 1,000 12.72


1210I(WB 1212KWB 1216KWB 1220KWB 1224KWB 1228KWB 1232KWB

•1408KWB -14101(WB 1412KWB 1416KWB 1420KWB 1424KWB 1428KWB 1432KWB

12-14X5/8 5,000 7.30 12-14X3/4 5,000 8.06 12-14X1 4,000 9.75 12-14X1 1/4 3,000 11.35 12-14X112 2,000 6.60 12-14X1 3/4 2,000 14.20 12-14X2 2,000 16.00

114-14X1/2 3,000 10.20 1/4-14X5/8 3,000 11.20 1/4-14X3/4 3,000 12.23 114-14X1 2,000 14.60 114-14X1 1/4 1,500 16.84 114-14X1 1/2 1,250 19.34 114-14X1 3/4 1,000 21.34 1/4-14X2 900 24.18

Part # Size Ctn Wght

Qty Lbs/M

.0606KPMB 6-20X318 8,000 2.54

.0608KPMB 6-20X1/2 8,000 2.88

.0808KPMB 8-18X1/2 5,000 3.80

.0809KPMB 8-18X9/16 5,000 3.90

.0812KPMB 8-18X3/4 5,000 4.75

.0816KPMB 8-18X1 4,000 5.60

.0820KPMB 8-18X11/4 3,000 6.80

.0824KPMB 8-18X112 2,000 7.50

.0826KPMB 8-18X15/8 3,000 7.40

.0828KPMB 8-18X13/4 3,000 8.17

.0830KPMB 8-18X17/8 2,000 9.00

.0832KPMB 8-18X2 2,000 9.00

All Items have #2 point

Part # Size Ctn Wght

Qty Lbs/M

.0840KPMB 8-18X212 2,000 1150

.0848KPMB 8-18X3 1,500 1350

•1008KPMB 10-16X1/2 6,000 4.10 1012KPMB 10-16X3/4 6,000 525 1016KPMB 10-16X1 5,000 6.67 1020KPMB 10.16X11/4 4,000 9.10 1024KPMB 10-16X1 12 3,000 10.40 1032KPMB 10-16X2 2,000 15.00

Steel Black Phosphate




Steel Black Oxide Items marked with "."


- - Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0808KSWB 8-18X1/2 10,000 330 •1008KSWB 10-16X1/2 8,000 4.50

.0816KSWB 8-18X1 8,000 4.65 1012KSWB 10-16X3/4 6,000 5.69


Self-Drilling Screws with

Black Zinc finish

See pages 422-423.


EX WASHER SLOTTED SELF DRILLING SCREWS



STEEL & SS BLACK OXIDE Self-Drilling ScrewsReturn to Table of Contents

•0606KPMB 6-20X3/8 8,000 2.54•0608KPMB 6-20X1/2 8,000 2.88 •0808KPMB 8-18X1/2 5,000 3.80•0809KPMB 8-18X9/16 5,000 3.90•0812KPMB 8-18X3/4 5,000 4.75•0816KPMB 8-18X1 4,000 5.60•0820KPMB 8-18X1 1/4 3,000 6.80•0824KPMB 8-18X1 1/2 2,000 7.50•0826KPMB 8-18X1 5/8 3,000 7.40•0828KPMB 8-18X1 3/4 3,000 8.17•0830KPMB 8-18X1 7/8 2,000 9.00•0832KPMB 8-18X2 2,000 9.00

•0840KPMB 8-18X2 1/2 2,000 11.50•0848KPMB 8-18X3 1,500 13.50 •1008KPMB 10-16X1/2 6,000 4.101012KPMB 10-16X3/4 6,000 5.251016KPMB 10-16X1 5,000 6.671020KPMB 10-16X1 1/4 4,000 9.101024KPMB 10-16X1 1/2 3,000 10.401032KPMB 10-16X2 2,000 15.00

•0808KSWB 8-18X1/2 10,000 3.30•0816KSWB 8-18X1 8,000 4.65

•1008KSWB 10-16X1/2 8,000 4.501012KSWB 10-16X3/4 6,000 5.69

•0608KWB 6-20X1/2 10,000 2.63 •0808KWB 8-18X1/2 10,000 3.32•0810KWB 8-18X5/8 9,000 3.79•0812KWB 8-18X3/4 8,000 4.16•0816KWB 8-18X1 6,000 5.01•0820KWB 8-18X1 1/4 2,000 6.21•0824KWB 8-18X1 1/2 2,000 7.26•0828KWB 8-18X1 3/4 2,000 8.63 •1006KWB 10-16X3/8 8,000 4.80•1008KWB 10-16X1/2 8,000 4.781010KWB 10-16X5/8 7,000 5.031012KWB 10-16X3/4 6,000 5.851016KWB 10-16X1 5,000 8.051020KWB 10-16X1 1/4 1,000 8.371024KWB 10-16X1 1/2 1,000 10.121028KWB 10-16X1 3/4 1,000 10.701032KWB 10-16X2 1,000 12.72

1210KWB 12-14X5/8 5,000 7.301212KWB 12-14X3/4 5,000 8.061216KWB 12-14X1 4,000 9.751220KWB 12-14X1 1/4 3,000 11.351224KWB 12-14X1 1/2 2,000 6.601228KWB 12-14X1 3/4 2,000 14.201232KWB 12-14X2 2,000 16.00 •1408KWB 1/4-14X1/2 3,000 10.20•1410KWB 1/4-14X5/8 3,000 11.201412KWB 1/4-14X3/4 3,000 12.231416KWB 1/4-14X1 2,000 14.601420KWB 1/4-14X1 1/4 1,500 16.841424KWB 1/4-14X1 1/2 1,250 19.341428KWB 1/4-14X1 3/4 1,000 21.341432KWB 1/4-14X2 900 24.18

•0408KPPB 4-24X1/2 10,000 1.14 •0606KPPB 6-20X3/8 10,000 1.69•0608KPPB 6-20X1/2 10,000 2.06•0610KPPB 6-20X5/8 10,000 2.28•0612KPPB 6-20X3/4 10,000 2.77•0616KPPB 6-20X1 10,000 3.19•0620KPPB 6-20X1 1/4 9,000 3.66•0624KPPB 6-20X1 1/2 8,000 4.54 •0707KPPB 7-19X7/16 10,000 2.27 •0806KPPB 8-18X3/8 10,000 2.96•0808KPPB 8-18X1/2 10,000 3.10•0810KPPB 8-18X5/8 10,000 3.50•0812KPPB 8-18X3/4 8,000 4.05•0816KPPB 8-18X1 6,000 5.05•0820KPPB 8-18X1 1/4 5,000 5.90•0824KPPB 8-18X1 1/2 4,000 7.29

•0832KPPB 8-18X2 2,000 9.22•0840KPPB 8-18X2 1/2 2,000 11.26•0848KPPB 8-18X3 2,000 11.97 •1008KPPB 10-16X1/2 8,000 4.401010KPPB 10-16X5/8 8,000 4.961012KPPB 10-16X3/4 7,000 5.511016KPPB 10-16X1 5,000 6.931020KPPB 10-16X1 1/4 4,000 7.961032KPPB 10-16X2 2,000 12.561064KPPB 10-16X4 1,000 22.30 1212KPPB 12-14X3/4 5,000 8.10 •1408KPPB 1/4-14X1/2 3,000 9.121412KPPB 1/4-14X3/4 3,000 11.501420KPPB 1/4-14X1 1/4 1,000 15.50

•0608KQPB 6-20X1/2 10,000 2.08 •0810KQPB 8-18X5/8 3,000 3.46•0812KQPB 8-18X3/4 3,000 4.00•0816KQPB 8-18X1 2,000 4.85•0824KQPB 8-18X1 1/2 4,000 6.60

•1008KQPB 10-16X1/2 8,000 4.641016KQPB 10-16X1 2,000 6.861020KQPB 10-16X1 1/4 1,000 7.731024KQPB 10-16X1 1/2 1,000 9.25 1224KQPB 12-14X1 1/2 2,000 12.20

NEW!

Self-Drilling Screws with

Black Zinc finish—

See pages 422-423.

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Steel Black Zinc



others have #3 point Steel Black Zinc

FLAT PHILLIPS UNDERCUT SELF DRILLING SCREWS



A

A

A-

"NW amt

I[SOURCE BOOK

FLA PHILLIPS SELF DRILLING SCREWS



#2 point

Part # Size Ctn Qty

Wght Lbs/M

Ctn Wght Part # Size Qty Lbs/M Part # Size

Ctn Qty


Ctn Qty

Wght Lbs/M

0848KPFBZ 8-18X3 1,250 11.83 0808KPUBZ 0812KPUBZ

8-18X1P2 8-18X314

10,000 10,000

1.97 2.83

1008KPUBZ 1012KPUBZ

1212KPUBZ

10-16X1/2 10-16X314

12-14X314

10,000 7,000

5,000

3.60 2.86

4.91

Self Drilling

Steel

410 Stainless

184 Stainless

Screws #2, #3, #4 and #5

Drill Points Available 888-222-9221 • 800-222-9221 • 201-337-2300

201-337-2301 (Fax) www.kanebridge.com

422 Phone: 888-222-9221

Fax: 201-337-2301 422 Phone: 888-222-9221 Fax: 201-337-2301


0848KPFBZ 8-18X3 1,250 11.83

0808KPUBZ 8-18X1/2 10,000 1.970812KPUBZ 8-18X3/4 10,000 2.83

1008KPUBZ 10-16X1/2 10,000 3.601012KPUBZ 10-16X3/4 7,000 2.86 1212KPUBZ 12-14X3/4 5,000 4.91

NEW!

Self Drilling

Screws

Steel

410 Stainless

18-8 Stainless

#2, #3, #4 and #5Drill Points Available

888-222-9221 • 800-222-9221 • 201-337-2300201-337-2301 (Fax)

www.kanebridge.com

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Ctn Wght Qty Lbs/M

Ctn Wght Qty Lbs/M

1,000 9.20

Part # Size Part # Size 1024KWAFMSBZ 10.24X112




others have #3 point Steel Black Zinc Steel Black Zinc

SELF DRILLING

Manufactured to ASME B18.6.3 Case Hardened to Rockwell C50 - 56

PAN PHILLIPS SCREWS SELF DRILLING

& SAE 178 specifications Manufactured to ASME B18.6.3 (Core Hardness: Rockwell C32-40) Case Hardened to Rockwell C50 - 56

SCREWS

& SAE 178 specifications (Core Hardness: Rockwell C32-40)

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M Size

Ctn Qty


Ctn Qty

Wght Lbs/M

-0406KPPBZ 4-24X318 lox 1.08 •1008KPPBZ 10-16X12 8,000 4.58 (1806KWBZ 8-18X3/8 10,000 233 1412KWBZ 1/4-14X314 3,000 11.71

.0408KPPBZ 4-24X112 10,000 1.27 1010KPPBZ 10-16X5/8 8,000 430 (1808KWBZ 8-18X12 10,000 325 1416KWBZ 1/4-14X1 2,000 1420

1012KPPBZ 10-16X314 7,000 551 (1812KWBZ 8-18X314 8,000 4.17 1420KWBZ 1/4-14X1 1/4 1,500 1625

(1606KPPBZ 6-20X318 10,000 1.63 1016KPPBZ 10-16X1 5,000 633 -0816KWBZ 8-18X1 6,000 5.13 1424KWBZ 1/4-14X1 1/2 1250 18.67

(1608KPPBZ 6-20X1/2 10,000 2.11 1020KPPBZ 10-16X1 1/4 4,000 8.07 •0820KWBZ 8-18X1 1/4 6,000 6.05 1428KWBZ 1!414X1314 1,000 2134

(1612KPPBZ 6-2004 10,000 2.80 1024KPPBZ 10.16X112 3,000 9.30 -0824KWBZ 8.18X112 5,000 7.26 1432KWBZ 114-14X2 900 24.18

(1616KPPBZ 6-20X1 10,000 3.33 1028KPPBZ 10-16X1 314 3,000 11.00 •1008KWBZ 10-16X1/2 8,000 5.06 3112KWBZ 5/16-12X314 1,000 2278

(1806KPPBZ 8-18X318 10,000 2.78 1212KPPBZ 12-14X314 5,000 8.10 •1012KWBZ 10-16X314 5,000 5.70 3116KWBZ 516-12X1 1,000 26.50

(1808KPPBZ 8-18X12 10,000 3.10 1216KPPBZ 12-14X1 3,000 9.14 1016KWBZ 10-16X1 5,000 6.90 3120KWBZ 5116.12X1114 700 30.05

(1810KPPBZ 8-18X5/8 10,000 3.45 1220KPPBZ 12-14X1 1/4 3,000 11.45 1020KWBZ 10-16X1 1/4 4,000 8.07 3124KWBZ 5116.12X1112 600 3338

(1812KPPBZ 8-18X314 9,000 4.05 1224KPPBZ 12.14X112 2,000 12.43 1024KWBZ 10-16X1 1/2 3,000 9.30

(1816KPPBZ 8-18X1 6,000 5.05 1232KPPBZ 12-14X2 1,000 15.75 .0820KPPBZ 8-18X1 1/4 5,000 5.90 1212KWBZ 12-14X314 5,000 7.50

.0824KPPBZ 8.18X1112 4,000 6.73 1412KPPBZ 114-14X314 3,000 11.50 1216KWBZ 12-14X1 4,000 9.20

.0828KPPBZ 8.18X1314 3,000 7.75 1416KPPBZ 1/4-14X1 2,000 13.70 1420KPPBZ 11414X11/4 1,000 15.52 1424KPPBZ 11414X112 1,000 17.82

Items marked with "•" Steel Black Zinc have #2 point; all Onennos


HEX WASHER UNSLOTTED

Over 2,100

Available for

Same-Day

Shipment

I

.41111111TIP



Return to Table of Contents STEEL BLACK ZINC Self-Drilling Screws


STEEL BLACK ZINC Self-Drilling ScrewsReturn to Table of Contents

•0806KWBZ 8-18X3/8 10,000 2.93•0808KWBZ 8-18X1/2 10,000 3.25•0812KWBZ 8-18X3/4 8,000 4.17•0816KWBZ 8-18X1 6,000 5.13•0820KWBZ 8-18X1 1/4 6,000 6.05•0824KWBZ 8-18X1 1/2 5,000 7.26 •1008KWBZ 10-16X1/2 8,000 5.06•1012KWBZ 10-16X3/4 5,000 5.701016KWBZ 10-16X1 5,000 6.901020KWBZ 10-16X1 1/4 4,000 8.071024KWBZ 10-16X1 1/2 3,000 9.30 1212KWBZ 12-14X3/4 5,000 7.501216KWBZ 12-14X1 4,000 9.20

1412KWBZ 1/4-14X3/4 3,000 11.711416KWBZ 1/4-14X1 2,000 14.201420KWBZ 1/4-14X1 1/4 1,500 16.251424KWBZ 1/4-14X1 1/2 1,250 18.671428KWBZ 1/4-14X1 3/4 1,000 21.341432KWBZ 1/4-14X2 900 24.18 3112KWBZ 5/16-12X3/4 1,000 22.783116KWBZ 5/16-12X1 1,000 26.503120KWBZ 5/16-12X1 1/4 700 30.053124KWBZ 5/16-12X1 1/2 600 33.88

•0406KPPBZ 4-24X3/8 10,000 1.08•0408KPPBZ 4-24X1/2 10,000 1.27 •0606KPPBZ 6-20X3/8 10,000 1.63•0608KPPBZ 6-20X1/2 10,000 2.11•0612KPPBZ 6-20X3/4 10,000 2.80•0616KPPBZ 6-20X1 10,000 3.33 •0806KPPBZ 8-18X3/8 10,000 2.78•0808KPPBZ 8-18X1/2 10,000 3.10•0810KPPBZ 8-18X5/8 10,000 3.45•0812KPPBZ 8-18X3/4 9,000 4.05•0816KPPBZ 8-18X1 6,000 5.05•0820KPPBZ 8-18X1 1/4 5,000 5.90•0824KPPBZ 8-18X1 1/2 4,000 6.73•0828KPPBZ 8-18X1 3/4 3,000 7.75

•1008KPPBZ 10-16X1/2 8,000 4.581010KPPBZ 10-16X5/8 8,000 4.801012KPPBZ 10-16X3/4 7,000 5.511016KPPBZ 10-16X1 5,000 6.931020KPPBZ 10-16X1 1/4 4,000 8.071024KPPBZ 10-16X1 1/2 3,000 9.301028KPPBZ 10-16X1 3/4 3,000 11.00 1212KPPBZ 12-14X3/4 5,000 8.101216KPPBZ 12-14X1 3,000 9.141220KPPBZ 12-14X1 1/4 3,000 11.451224KPPBZ 12-14X1 1/2 2,000 12.431232KPPBZ 12-14X2 1,000 15.75 1412KPPBZ 1/4-14X3/4 3,000 11.501416KPPBZ 1/4-14X1 2,000 13.701420KPPBZ 1/4-14X1 1/4 1,000 15.521424KPPBZ 1/4-14X1 1/2 1,000 17.82

1024KWAFMSBZ 10-24X1 1/2 1,000 9.20

Over 2,100

Available for

Same-Day

Shipment

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



141207KWSM18 14-20X3/4 1,000 12.40 141607KWSM18 114-20X1 1,000 15.00 1020KWXFY 10-16X11/4 2,000 7.80 1012KWXFY 10-16X34 3,000 5.80 1016KWXFY 10-16X1 2,500 6.60

lOnsimos Steel Black Oxide

Ctn WgM Qty Lbs/M


Ctn Wght Qty Lbs/M Part # Size Part # Size Part # Size


others have #3 point 410 Stainless Steel

Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0812K1F410 8-18X3/4 2,000 3.00 1412KTF410 114-14X3/4 1,500 7.70 1416KTF410 114-14X1 1,500 9.50

1016KTF410 10-16X1 2,500 5.50 1424KTF410 114-14X1 1/2 1,000 14.30 1020KTF410 10.16X11/4 2,000 6.40 1432KTF410 114-14X2 500 18.40 1024KTF410 10-16X1 12 2,000 7.70 1032KTF410 10-16X2 1,500 10.10 1040KTF410 10.16X212 1,500 12.80



Part # Size Ctn Qty

.0606K1P410 6-20X3/8 2,500 0608KTP410 6-20X1/2 2,500

0806KTP410 8-18X318 2,000 0808KTP410 8-18X1/2 2,000 0812KTP410 8-18X3/4 2,000

430 Phone: 800-222-9221


Ctn Wght Qty

Ctn Wght Qty Lbs/M Part # Size Part # Size

Ctn Qty Part #

1416KWAFMSB 1/4-20X1 2,000 12.90 1420KWAFMSB 114-20X1 1/4 1,000 15.37

O812KPOWC 8-18X3/4 4,000 4.50 0820KPOWC O816KPOWC 8-18X1 4,000 5.00

Fax: 201-337-2301

Wght Lbs/M I Part # Size

8-18X1 1/4

Ctn Qty 3,000

Wght Lbs/M

6.50



Steel Zinc Plated



OVAL PHILLIPS W/COUNTERSUNK FINISHING WASHER SELF DRILLING SEMS SCREWS

Screw Manufactured to ASME B18.6.3 & SAE 178 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

410 Stainless Steel

Ctn Wght Qty Lbs/M

WgM Ctn Wght

Lbs/M Part # Size Qty Lbs/M

1.70 .1008K1P410

2.10 1012KTP410 1016KTP410

2.60

3.10 1212KTP410 4.10

1412KTP410 1416KTP410

10-16X1/2 1,500 4.40 10-16X3/4 1,000 5.50 10-16X1 1,000 7.10

12-14X3/4 500 7.60

114-14X3/4 500 10.60 114-14X1 500 12.70


Heads are 7/16" Across the Flats Head Height: 1/4" diam: .172-.190

WAFER SQUARE-PHILLIPS SELF DRILLING SCREWS WITH SPACED THREADS






Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

1012KW1

1212KW1

10-16X34

12-14X34

4,000 6.00

3,000 7.60

1414KW1 1/4-14X7/8 2,000 12.80


Ctn Wght Qty Lbs/M

0808KSWG 8-18X1/2 10,000 330

18-8 Stainless Steel Items marked with "."


All Items have #3 point Steel Zinc Yellow


Steel Zinc Plated All Items

have #1 point

I[SOURCE BOOK

Steel Zinc Green Plated All items have #3 point




Manufactured to ASME B18.6.3 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

430 Phone: 800-222-9221 Fax: 201-337-2301


0808KSWG 8-18X1/2 10,000 3.30

141207KWSM18 1/4-20X3/4 1,000 12.40 141607KWSM18 1/4-20X1 1,000 15.00

•0812KTF410 8-18X3/4 2,000 3.00 1016KTF410 10-16X1 2,500 5.501020KTF410 10-16X1 1/4 2,000 6.401024KTF410 10-16X1 1/2 2,000 7.701032KTF410 10-16X2 1,500 10.101040KTF410 10-16X2 1/2 1,500 12.80

1412KTF410 1/4-14X3/4 1,500 7.701416KTF410 1/4-14X1 1,500 9.501424KTF410 1/4-14X1 1/2 1,000 14.301432KTF410 1/4-14X2 500 18.40

•0606KTP410 6-20X3/8 2,500 1.70•0608KTP410 6-20X1/2 2,500 2.10 •0806KTP410 8-18X3/8 2,000 2.60•0808KTP410 8-18X1/2 2,000 3.10•0812KTP410 8-18X3/4 2,000 4.10

•1008KTP410 10-16X1/2 1,500 4.401012KTP410 10-16X3/4 1,000 5.501016KTP410 10-16X1 1,000 7.10 1212KTP410 12-14X3/4 500 7.60 1412KTP410 1/4-14X3/4 500 10.601416KTP410 1/4-14X1 500 12.70

1012KW1 10-16X3/4 4,000 6.00 1212KW1 12-14X3/4 3,000 7.60

1414KW1 1/4-14X7/8 2,000 12.80

1012KWXFY 10-16X3/4 3,000 5.801016KWXFY 10-16X1 2,500 6.60

1020KWXFY 10-16X1 1/4 2,000 7.80

1416KWAFMSB 1/4-20X1 2,000 12.90 1420KWAFMSB 1/4-20X1 1/4 1,000 15.37

•0812KPOWC 8-18X3/4 4,000 4.50•0816KPOWC 8-18X1 4,000 5.00

•0820KPOWC 8-18X1 1/4 3,000 6.50

NEW!

NEW!

NEW! NEW!

NEW!

NEW!

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Type-BSD 5/16 & 3/8 Diameter #3 Point T

A

t

T

V

J78- SELF-DRILLING SCREWS, TYPE BSD *SAE 2013

Nominal Size or Basic Screw

Diameter

Threads Per Inch

T t P Minimum Practical Nominal Screw Lengths,

Formed Points

Minimum Torsional Strength,

lb.- in. (STEEL SCREWS ONLY)

Major Diameter Minor Diameter Protrusion Allowance

Max Min Max Min #1 Pt.* #2 Pt. #3 Pt. 90° Head,

#2 Pt Csk Head,

#2 Pt 90° Head,

#3 Pt Csk Head,

#3 Pt

2* .0860 32 .088 .084 .064 .060 .125 - 1/4 5/16 - - -

4 .1120 24 .114 .110 .086 .082 .163 - 5/16 3/8 - - 14

6 .1380 20 .139 .135 .104 .099 .190 .220 5/16 3/8 3/8 7/16 24

7* .1510 19 .153 .146 .113 .109 .137 .157 5/16 3/8 3/8 7/16 -

8 .1640 18 .166 .161 .122 .116 .118 .211 .251 3/8 7/16 7/16 1/2 42

10 .1900 16 .189 .183 .141 .135 .235 .300 7/16 1/2 1/2 9/16 61

12 .2160 14 .215 .209 .164 .157 .283 .353 1/2 5/8 1/2 5/8 92

1/4 .2500 14 .246 .240 .192 .185 .318 .393 1/2 5/8 1/2 5/8 150

*SAE J78 does not include specifications for #2 or #7 diameter drill screws. Nor does it address the #1 drill point.

COARSE THREAD SELF DRILLING SCREWS - 5/16 & 3/8 DIAMETERS, #3 POINT

Nominal Size or Basic

Screw Diameter Threads Per

Inch

T t A B

Major Diameter Minor Diameter Drill Point Length Drill Point Diameter

Max Min Max Min Max Min Max Min

5/16 .3125 12 .315 .307 .272 .263 .421 .361 .270 .265

3/8 .3750 12 .380 .370 .308 .298 .354 .314 .338 .330

Type-CSD

Reamer with Wings (Type-CSD)

'

P

D

STEEL SELF-DRILLING SCREWS, TYPE CSD SAE J78- 2013

Nominal Size

or Basic Screw Diameter

Threads Per Inch

D P Minimum Practical Nominal Screw Lengths,

i Countersunk Heads, Formed Points

Minimum Torsional

Strength, lb.- in. (STEEL SCREWS

ONLY)

Major Diameter Protrusion Allowance

Max Min #2 Pt #3 Pt 90° Head, #2 Pt 90° Head, #3 Pt Csk Head, #2 Pt Csk Head, #3 Pt

4 .1120 40 .1120 .1072 .130 - 5/16 - 3/8 - 14

6 .1380 32 .1380 .1326 .152 .172 5/16 3/8 3/8 7/16 24

8 .1640 32 .1640 .1586 .162 .202 7/16 1/2 7/16 1/2 48

10 .1900 24 .1900 .1834 .193 .258 1/2 9/16 1/2 9/16 65

12 .2160 24 .2160 .2094 .223 .293 5/8 5/8 5/8 5/8 100

1/4 .2500 20 .2500 .2428 .275 .350 5/8 5/8 5/8 5/8 156

Self-Drilling ScrewS, Type BSD *SAE J78-2013


DiameterThreads Per Inch

T t PMinimum Practical Nominal Screw Lengths,

Formed PointsMinimum Torsional Strength,

lb.- in. (STEEL SCREWS ONLY)

Major Diameter Minor Diameter Protrusion Allowance

Max Min Max Min #1 Pt.* #2 Pt. #3 Pt. 90° Head, #2 Pt

Csk Head, #2 Pt

90° Head, #3 Pt

Csk Head, #3 Pt

2* .0860 32 .088 .084 .064 .060 .125 - 1/4 5/16 - - -4 .1120 24 .114 .110 .086 .082 .163 - 5/16 3/8 - - 146 .1380 20 .139 .135 .104 .099 .190 .220 5/16 3/8 3/8 7/16 247* .1510 19 .153 .146 .113 .109 .137 .157 5/16 3/8 3/8 7/16 -8 .1640 18 .166 .161 .122 .116 .118 .211 .251 3/8 7/16 7/16 1/2 4210 .1900 16 .189 .183 .141 .135 .235 .300 7/16 1/2 1/2 9/16 6112 .2160 14 .215 .209 .164 .157 .283 .353 1/2 5/8 1/2 5/8 921/4 .2500 14 .246 .240 .192 .185 .318 .393 1/2 5/8 1/2 5/8 150

coarSe ThreaD Self Drilling ScrewS - 5/16 & 3/8 DiameTerS, #3 poinT

Nominal Size or Basic Screw Diameter

Threads Per Inch

T t A BMajor Diameter Minor Diameter Drill Point Length Drill Point Diameter

Max Min Max Min Max Min Max Min5/16 .3125 12 .315 .307 .272 .263 .421 .361 .270 .2653/8 .3750 12 .380 .370 .308 .298 .354 .314 .338 .330

P

T tA

T t BType-BSD 5/16 & 3/8 Diameter

#3 Point

*SAE J78 does not include specifications for #2 or #7 diameter drill screws. Nor does it address the #1 drill point.

STeel Self-Drilling ScrewS, Type cSD SAE J78- 2013


Diameter

Threads Per Inch

D PMinimum Practical Nominal Screw Lengths,

Countersunk Heads, Formed Points

Minimum Torsional

Strength, lb.- in. (STEEL SCREWS

ONLY)

Major Diameter Protrusion Allowance

Max Min #2 Pt #3 Pt 90° Head, #2 Pt 90° Head, #3 Pt Csk Head, #2 Pt Csk Head, #3 Pt

4 .1120 40 .1120 .1072 .130 - 5/16 - 3/8 - 146 .1380 32 .1380 .1326 .152 .172 5/16 3/8 3/8 7/16 248 .1640 32 .1640 .1586 .162 .202 7/16 1/2 7/16 1/2 4810 .1900 24 .1900 .1834 .193 .258 1/2 9/16 1/2 9/16 6512 .2160 24 .2160 .2094 .223 .293 5/8 5/8 5/8 5/8 1001/4 .2500 20 .2500 .2428 .275 .350 5/8 5/8 5/8 5/8 156

D

P

D

PType-CSD Reamer with Wings (Type-CSD)

T t

#4 Point

iB

#4 Point #5 Point

iB

A

#4 & #5 POINT SELF DRILLING SCREWS, UNIFIED THREAD PITCH

Diameter & Thread

Pitch

Point Size

T t A B Drilling

Capacity

Performance Info*

Major Thread Diameter

Minor Thread Diameter

Drill Point Length

Drill Point Diameter Steel

Gauge

Shear Strength (lapped steel) (lbs.)

Pullout Strength (lbs.) Max Min Max Min Max Min Max Min Max Min

10-24 #5 .189 .181 .162 .158 .413 .373 .173 .165 .250 .125 - - -

12-24 #4 .216 .207 .172 .168 .523 .495 .202 .190 .312 .145 12 2000 1500

12-24 #5 .216 .207 .172 .168 .640 .603 .202 .190 .500 .250 1/8 2700 2200

1/4 2760 4000

1/4-20 #4 .250 .239 .192 .185 .511 .471 .227 .215 .312 .145 12 1800 -

1/4-20 #5 .250 .239 .192 .185 .629 .569 .228 .222

#5 Point

T t

#4 & #5 POINT SELF DRILLING SCREWS, TAPPING SCREW THREAD

Diameter & Thread

Pitch

L

Point Size

T t A B Drilling Capacity

Length (+0, -.050)



Drill Point Length Drill Point Diameter

Max Min Max Min Max Min Max Min Max Min

12-14 7/8 thru 1.25" #4 .215 .209 .164 .157 ..480 .455 .202 .188 .312 .145

12-14 3/4 thru 4" #5 .215 .209 .164 .157 .630 .605 .202 .188 .500 .250

1/4-14 7/8 thru 3.5" #4 .246 .240 .192 .185 .650 .625 .225 .215 .312 .145

1/4-14 1.5 thru 6" #5 .246 .240 .192 .185 .755 .730 .225 .215 .500 .250

5/16-12 1 thru 1.5" #4 .315 .307 .272 .263 .570 .515 .285 .275 .312 .110

5/16-12 1 thru 3" #5 .315 .307 .244 .236 .590 .555 .275 .285 * *

*There is no industry standard governing the performance of #4 & #5 drill point screws. The manufacturer recommends testing this part in the actual application to determine if it will achieve the desired drilling capacity. As a point of reference, the manufac-turer has successfully drilled a steel screw through a steel plate thickness of 0.236" using a minimum torque of 334 kg/cm.

#4 & #5 poinT Self Drilling ScrewS, UnifieD ThreaD piTch

Diameter & Thread

Pitch

Point Size

T t A BDrilling

Capacity

Performance Info*



Drill Point Length

Drill Point Diameter Steel

Gauge

Shear Strength (lapped steel) (lbs.)

Pullout Strength

(lbs.)Max Min Max Min Max Min Max Min Max Min

10-24 #5 .189 .181 .162 .158 .413 .373 .173 .165 .250 .125 - - -

12-24 #4 .216 .207 .172 .168 .523 .495 .202 .190 .312 .145 12 2000 1500

12-24 #5 .216 .207 .172 .168 .640 .603 .202 .190 .500 .2501/8 2700 22001/4 2760 4000

1/4-20 #4 .250 .239 .192 .185 .511 .471 .227 .215 .312 .145 12 1800 -1/4-20 #5 .250 .239 .192 .185 .629 .569 .228 .222

#4 Point #5 Point

AA

B B

T t T t

LL

#4 & #5 poinT Self Drilling ScrewS, Tapping Screw ThreaD

Diameter & Thread

Pitch

L

Point Size

T t A BDrilling Capacity

Length (+0, -.050)


Minor Thread Diameter Drill Point Length Drill Point Diameter

Max Min Max Min Max Min Max Min Max Min

12-14 7/8 thru 1.25” #4 .215 .209 .164 .157 ..480 .455 .202 .188 .312 .145

12-14 3/4 thru 4” #5 .215 .209 .164 .157 .630 .605 .202 .188 .500 .250

1/4-14 7/8 thru 3.5” #4 .246 .240 .192 .185 .650 .625 .225 .215 .312 .145

1/4-14 1.5 thru 6” #5 .246 .240 .192 .185 .755 .730 .225 .215 .500 .250

5/16-12 1 thru 1.5” #4 .315 .307 .272 .263 .570 .515 .285 .275 .312 .110

5/16-12 1 thru 3” #5 .315 .307 .244 .236 .590 .555 .275 .285 * *

#4 Point #5 Point

*There is no industry standard governing the performance of #4 & #5 drill point screws. The manufacturer recommends testing this part in the actual application to determine if it will achieve the desired drilling capacity. As a point of reference, the manufac-turer has successfully drilled a steel screw through a steel plate thickness of 0.236” using a minimum torque of 334 kg/cm.

Return to Table of Contents I[SOURCE BOOK

Steel 1,000-Hour Silver Ruspert

#1 Point Items marked "••" have

#1 point; items marked "." have #2 point; all others have

#3 point


Part # Size Part # Size Ctn Wght Qty Lbs/M

1414KW1HC 114-14X7/8 2,000 13.50

Ctn WgM Qty Lbs/M

1212KW1HC 12-14X3/4 3,000 7.89







#4 point

HEX WASHER UNSLOTTED-#4 PT. SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE

Heads Manufactured to ASME B18.6.3 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)

Steel Silver Ruspert Finish / 1,000 Hour Salt-Spray Rated

HEX WASHER UNSLOTTED W/# I STITCH PT. SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE

Heads Manufactured to ASME B18.6.3 Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)


HEX WASHER UNSLOTTED-STANDARD PT. SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE



Part # Size Ctn Qty


Ctn Qty

Wght Lbs/M

.0808KWHC 8-18X1/2 10,000 3.22 1212KWHC 12-14X3/4 5,000 7.50 (1812KWHC 8-18X3/4 8,000 4.30 1214KWHC 12-14X7/8 4,000 8.38 .0816KWHC 8-18X1 6,000 5.14 1216KWHC 12-14X1 4,000 9.10

1220KWHC 12-14X11/4 3,000 11.00 .1008KWHC 10-16X12 8,000 4.70 1224KWHC 12-14X112 2,000 12.50 1010KWHC 10-16X5/13 6,000 5.10 1232KWHC 12-14X2 2,000 15.70 -1012KW1HC 10-16X34 4,000 5.90 1240KWHC 12-14X212 1,000 19.30 1012KWHC 10-16X34 5,000 5.92 1248KWHC 12-14X3 1,000 22.67 1016KWHC 10-16X1 5,000 6.90 1264KWHC 12-14X4 500 29.20 1020KWHC 10-16X1 1/4 4,000 8.00 1024KWHC 10-16X1 1/2 3,000 9.30 1412KWHC 1/4-14X3/4 3,000 11.75 1032KWHC 10-16X2 2,000 12.17 1414KWHC 1/4-14X7/8 2,000 12.80 1040KWHC 10.16X212 2,000 14.63 1416KWHC 114-14X1 2,000 14.10

1420KWHC 114-14X1 1/4 1,500 15.80 1424KWHC 114-14X1 1/2 1,250 18.50 1428KWHC 114-14X1 3/4 1,000 21.00 1432KWHC 1/4-14X2 900 23.00 1440KWHC 1/4-14X2 1/2 800 28.00 1448KWHC 1/4-14X3 800 31.70 1464KWHC 1/4-14X4 500 41.20 1480KWHC 1/4-14X5 500 51.50

HEX WASHER UNSLOTTED-#2 PT. SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE




#2 point

HEX WASHER UNSLOTTED-#2 PT. SELF DRILL SCREWS W/MACHINE SCREW THREAD-HIGH CORROSION RESISTANCE



#2 point

1216KW2HC 12-14X1 4,000 9.14 1220KW2HC 12-14X1 1/4 3,000 11.13 1224KW2HC 12-14X1 1/2 2,000 12.70

1416KW2HC 114-14X1 2,000 14.38 1420KW2HC 114-14X1 1/4 1,500 16.50 14327KW2HC 114-14X27/32 800 25.50

1010KWMS2HC 10-24X5/13 6,000 6.63



Heads manufactured to ASME B18.6.3 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)


NEW!

#4 point

Ctn Qty

4,000 3,000

Part # Size 1214KW4HC 12-14X7/8

Ctn Wght Qty Lbs/M

5,000 8.10


1214KWMS4HC 12-24X7A3 1220KWMS4HC 12-24X11/4

es//M I Part # Size 8.50 1418KWMS4HC 114-20X1 1/8

11.10 1424KWMS4HC 114-20X1 1/2 14401(WMS4HC 1/4-20X212

Ctn Wght 11 Lbs/M 1,500 15.60 1,000 18.90

800 29.50

434 Phone: 800-222-9221 Fax: 201-337-2301 434 Phone: 800-222-9221 Fax: 201-337-2301


1212KW1HC 12-14X3/4 3,000 7.89

1414KW1HC 1/4-14X7/8 2,000 13.50

1216KW2HC 12-14X1 4,000 9.141220KW2HC 12-14X1 1/4 3,000 11.131224KW2HC 12-14X1 1/2 2,000 12.70

1416KW2HC 1/4-14X1 2,000 14.381420KW2HC 1/4-14X1 1/4 1,500 16.5014327KW2HC 1/4-14X2 7/32 800 25.50

1214KW4HC 12-14X7/8 5,000 8.10

•0808KWHC 8-18X1/2 10,000 3.22•0812KWHC 8-18X3/4 8,000 4.30•0816KWHC 8-18X1 6,000 5.14 •1008KWHC 10-16X1/2 8,000 4.701010KWHC 10-16X5/8 6,000 5.10••1012KW1HC 10-16X3/4 4,000 5.901012KWHC 10-16X3/4 5,000 5.921016KWHC 10-16X1 5,000 6.901020KWHC 10-16X1 1/4 4,000 8.001024KWHC 10-16X1 1/2 3,000 9.301032KWHC 10-16X2 2,000 12.171040KWHC 10-16X2 1/2 2,000 14.63

1212KWHC 12-14X3/4 5,000 7.501214KWHC 12-14X7/8 4,000 8.381216KWHC 12-14X1 4,000 9.101220KWHC 12-14X1 1/4 3,000 11.001224KWHC 12-14X1 1/2 2,000 12.501232KWHC 12-14X2 2,000 15.701240KWHC 12-14X2 1/2 1,000 19.301248KWHC 12-14X3 1,000 22.671264KWHC 12-14X4 500 29.20 1412KWHC 1/4-14X3/4 3,000 11.751414KWHC 1/4-14X7/8 2,000 12.801416KWHC 1/4-14X1 2,000 14.101420KWHC 1/4-14X1 1/4 1,500 15.801424KWHC 1/4-14X1 1/2 1,250 18.501428KWHC 1/4-14X1 3/4 1,000 21.001432KWHC 1/4-14X2 900 23.001440KWHC 1/4-14X2 1/2 800 28.001448KWHC 1/4-14X3 800 31.701464KWHC 1/4-14X4 500 41.201480KWHC 1/4-14X5 500 51.50

1010KWMS2HC 10-24X5/8 6,000 6.63

1214KWMS4HC 12-24X7/8 4,000 8.501220KWMS4HC 12-24X1 1/4 3,000 11.10

1418KWMS4HC 1/4-20X1 1/8 1,500 15.601424KWMS4HC 1/4-20X1 1/2 1,000 18.901440KWMS4HC 1/4-20X2 1/2 800 29.50

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO




4=10

435 www.kanebridge.com e-mail: [email protected]



Heads manufactured to ASME B18.6.3 specifications Case Hardened to Rockwell C52 - 58 (Core Hardness: Rockwell C32-40)


HIGH CORROSION-RESISTANT FASTENERS


OVAL PHILLIPS SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE




#5 point


Ctn Wght Part # Size Qty Lbs/M Part #


Ctn Wght Qty Lbs/M Size

1220KWMS5HC 12-24X11/4 1224KWMS5HC 12-24X112 1232KWMS5HC 12-24X2 1248KWMS5HC 12-24X3

3,000 11.00 2,000 12.80 2,000 16.83 1,000 24.60

1548KWMS5HC 114-28X3 500 35.67 1564KWMS5HC 114-28X4 500 47.00

1012KPOHC 10-16X314 7,000 4.90 1016KPOHC 10-16X1 5,000 5.90

1020KPOHC 10-16X11/4 4,000 7.70

#3 point Steel 1,000-Hour

Silver Ruspert

2,000 1,500 1,500 1,500 1,000

750 750 500

10.70 12.38 14.04 15.50 19.05 22.45 25.75 32.60

HEX WASHER UNSLOTTED-STANDARD PT. SELF DRILL SCREWS W/MACHINE SCREW THREAD-HIGH CORROSION RESISTANCE


Steel Silver Ruspert Finish / 1,000 Hour Salt-Spray Rated Ctn Wght Qty Lbs/M Part # Size


1214KWMSHC 1216KWMSHC 1220KWMSHC 1224KWMSHC 1232KWMSHC

12-24X7/8 12-24X1 12-24X1 1/4 12-24X1 1/2 12-24X2

1012KWMSHC 10-24X3/4 5,000 5.98 1016KWMSHC 10-24X1 5,000 7.50

8.86 9.60

11.70 13.80 17.38

3,000 3,000 3,000 2,000 1,500

1432KWMSHC 114-20X2 1,000 25.00 1440KWMSHC 114-20X212 800 29.75

NEW! Steel 1,000-Hour -

Silver Ruspert



Part # .0812KWNHC .0816KWNHC .0820KWNHC .0824KWNHC

1012KWNHC 1016KWNHC 1020KWNHC 1024KWNHC

Size 8-18X3/4 8-18X1 8-18X1 1/4 8-18X1 1/2

10-16X3/4 10-16X1 10-16X1 1/4 10-16X1 1/2

Part # Size 1212KWNHC 12-14X3/4 1216KWNHC 12-14X1 1220KWNHC 12-14X11/4 1224KWNHC 12-14X112 1232KWNHC 12-14X2 1240KWNHC 12-14X212 1248KWNHC 12-14X3 1264KWNHC 12-14X4

Ctn Wght Qty Lbs/M

1412KWNHC 114-14X3/4 1,000 15.00 1416KWNHC 114-14X1 1,000 16.75 1420KWNHC 114-14X1 1/4 1,000 19.50 1424KWNHC 114-14X1 1/2 1,000 21.63 1432KWNHC 114-14X2 1,000 26.33 1440KWNHC 114-14X212 750 31.00 1448KWNHC 114-14X3 500 35.50

Ctn Qty

2,000 2,000 2,000 2,000

2,000 2,000 2,000 2,000

Wght Lbs/M

6.00 7.00 8.00 9.33

7.95 9.25

10.60 11.67

HEX WASHER UNSLOTTED W NMEPDM WASHERS SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE




PAN PHILLIPS SELF DRILLING SCREWS-HIGH CORROSION RESISTANCE


Steel Silver Ruspert Finish / 1,000 Hour Salt-Spray Rated Ctn Wght Qty Lbs/M Part # Size


•1008KPPHC 10-16X12 8,000 4.40 1010KPPHC 10-16X518 8,000 4.94

1012KPPHC 10-16X3/4 7,000 5.56 1016KPPHC 10-16X1 5,000 6.70

Part # Size 0808PWSHC 8-15X1/2

Ctn Wght Qty Lbs/M

10,000 3.20


1012PWSHC 10-16X3/4 7,000 5.20

.101231PWSHC 10-16X3/4 7,000 5.73

All heads are 1/4" A.F. unless noted

Items marked "." are 5/16" A.F.

Steel 1,000-Hour - Silver Ruspert

SLOTTED SERRATED HEX WASHER SELF PIERCING SCREWS-HIGH CORROSION RESISTANCE

Case Hardened to Rockwell C45 min. (Core Hardness: C28-38) Fully Threaded / Steel Silver Ruspert Finish / 1,000 Hour Salt-Spray Rated



HIGH CORROSION-RESISTANT FASTENERSReturn to Table of Contents

1220KWMS5HC 12-24X1 1/4 3,000 11.001224KWMS5HC 12-24X1 1/2 2,000 12.801232KWMS5HC 12-24X2 2,000 16.831248KWMS5HC 12-24X3 1,000 24.60

1548KWMS5HC 1/4-28X3 500 35.671564KWMS5HC 1/4-28X4 500 47.00

1012KWMSHC 10-24X3/4 5,000 5.981016KWMSHC 10-24X1 5,000 7.50

1214KWMSHC 12-24X7/8 3,000 8.861216KWMSHC 12-24X1 3,000 9.601220KWMSHC 12-24X1 1/4 3,000 11.701224KWMSHC 12-24X1 1/2 2,000 13.801232KWMSHC 12-24X2 1,500 17.38 1432KWMSHC 1/4-20X2 1,000 25.001440KWMSHC 1/4-20X2 1/2 800 29.75

•0812KWNHC 8-18X3/4 2,000 6.00•0816KWNHC 8-18X1 2,000 7.00•0820KWNHC 8-18X1 1/4 2,000 8.00•0824KWNHC 8-18X1 1/2 2,000 9.33 1012KWNHC 10-16X3/4 2,000 7.951016KWNHC 10-16X1 2,000 9.251020KWNHC 10-16X1 1/4 2,000 10.601024KWNHC 10-16X1 1/2 2,000 11.67

1212KWNHC 12-14X3/4 2,000 10.701216KWNHC 12-14X1 1,500 12.381220KWNHC 12-14X1 1/4 1,500 14.041224KWNHC 12-14X1 1/2 1,500 15.501232KWNHC 12-14X2 1,000 19.051240KWNHC 12-14X2 1/2 750 22.451248KWNHC 12-14X3 750 25.751264KWNHC 12-14X4 500 32.60 1412KWNHC 1/4-14X3/4 1,000 15.001416KWNHC 1/4-14X1 1,000 16.751420KWNHC 1/4-14X1 1/4 1,000 19.501424KWNHC 1/4-14X1 1/2 1,000 21.631432KWNHC 1/4-14X2 1,000 26.331440KWNHC 1/4-14X2 1/2 750 31.001448KWNHC 1/4-14X3 500 35.50

1012KPOHC 10-16X3/4 7,000 4.901016KPOHC 10-16X1 5,000 5.90

1020KPOHC 10-16X1 1/4 4,000 7.70

•1008KPPHC 10-16X1/2 8,000 4.401010KPPHC 10-16X5/8 8,000 4.94

1012KPPHC 10-16X3/4 7,000 5.561016KPPHC 10-16X1 5,000 6.70

0808PWSHC 8-15X1/2 10,000 3.20

1012PWSHC 10-16X3/4 7,000 5.20 •101231PWSHC 10-16X3/4 7,000 5.73

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

FWAHL

WhiteStamp0p3x7

FWAHL

SmallO



Self-Drilling Screws Over 1,800 Items for Same-Day Shipment

Kanebridge Corporation Over 2,000 Varieties




1125 Gateway Drive Elgin, IL 60123


5316 Lindbergh Lane Bell, CA 90201

Here to Serve You

Our Customer Service Department can be contacted 7:30 AM - 8:00 PM Eastern, Monday thru Friday. Our e-commerce site, FasNetTM, is available 24/7.


153 Bauer Drive Oakland, NJ 07436



Self-Drilling ScrewsOver 1,800 Items for Same-Day Shipment


1125 Gateway DriveElgin, IL 60123

Over 2,000 Varieties



Here to Serve You

Our Customer Service Department can be contacted 7:30 AM - 8:00 PM Eastern, Monday thru Friday. Our e-commerce site, FasNet™, is available 24/7.

Kanebridge Corporation




5316 Lindbergh LaneBell, CA 90201


153 Bauer DriveOakland, NJ 07436

KANEBRIDGE SELF-DRILLINGSCREWS

NEW CATEGORIES• Flat Phil w/Mach Scr Thread, Stl Zinc• Hex Washer Unslot w/ #1 Point, Stl Zinc• Modified Truss Six-Lobe, Stl Zinc• Pan Six-Lobe, 410 SS• Round Washer w/Square Recess, Stl Zinc• Serrated Unslot H/W w/Mach Scr Thrd, Stl Zinc• Serrated Unslot H/W w/Mach Scr Thrd, 18-8• Wafer Square-Phillips Recess, Stl Z Yellow

184New sizes of Self-Drilling screws added in the last 12 months

9All New Categories added since September 2015

41Stainless Steel Self-Drilling Product Lines

Kanebridge gives all distributors same-day access to the largest inventory of Self-Drilling screws in the industry.

Our selection continues to grow because of the new product requests and recommendations you, our loyal customers, have provided.

Now more than ever, we are likely to have the drill screw with the size, head style, material and finish that your customer needs.

a •

- a 9=1: 7' •

• . —

_ :".=, • . - . • - • — - STE'

. - • -- -

• - _

- — _ _ • 7--=

- - f r ___ •

2000+ Self-Drilling Screws ga Stack. Euvaiday.

99•61-- —

,dry

- _ 4110

7,-.

• - -

• r

IrKANEBRIDGE CORPORATION

Tel (800) 222-9221

Fax (201) 337-2301

[email protected]

www.kanebridge.com

Kane�idgeSELF-DRILLING SCREWS

Tel (800) 222-9221

Fax (201) 337-2301

[email protected]

www.kanebridge.com

2000+ Self-Drilling ScrewsIn Stock. Everyday.

C

M

Y

CM

MY

CY

CMY

K

SDS-FINAL.pdf 1 11/3/16 9:33 AM

FWAHL

SmallO



Date post:	11-Sep-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

sane midge Kane˙idg Self-Drilling Screws1 SELF-DRILLING ......Kanebridge Self-Drilling Screws ** *...

Documents