Date post: | 24-Oct-2014 |
Category: |
Documents |
Upload: | vijin-mayyil |
View: | 617 times |
Download: | 12 times |
Project Report 2006 Dept. of BBM
S.E.S COLLEGE S R E E K A N D A P U R A M
PROJECT REPORT ON
An overall study on the Kanhirode Weavers Co-operative Production And Sales Society Ltd. kannur
DECLARATION
This is to certify that the project report entitled “An over all study about
the Kanhirode Weavers Co-operative P & S Society Ltd., Kannur”, submitted
Taliparamba Arts & Science College,Kanhirangad 1
Project Report 2006 Dept. of BBM
to Kannur University in partial fulfillment of the requirement for the award of the
Degree of Bachelor of Business Management (BBM) is a record of original
work done by me during my period of study in Taliparamba Arts & Science
College, Kanhirangad, under the guidance of Mr. Ajai Abraham Thomas,
MBA.
Place: KANHIRANGAD SANOOP . V
Date: Reg No: 78950
Taliparamba Arts & Science College,Kanhirangad 2
Project Report 2006 Dept. of BBM
ACKNOWLEDGEMENT
I am grateful to Mr. V.V. Kunhikrishnan, M.A, B.Ed, Ph.D, Principal
Taliparamba Arts & Science College, Kanhirangad, for permitting me to take up
this project work.
I wish to express my sincere thanks to Mr. P.V. Kamalakshan, M Com,
B.Ed, MBA, Head of the Department of Business Management for the help, co-
operation and advice extended to me throughout the study.
I wish to express to my sincere thanks to Mr. Ajai Abraham Thomas,
MBA, and faculty guide for the continuous and valuable information rendered to
me in completing my study with in the allotted time.
I thank Mr. Bhaskaran, the secretary of Kanhirode Weavers co-operative
P & S Society Ltd., for giving permission for conducting the project work in their
esteemed organization.
I express my deep sense of thank to Mr. Biju, Quality Handling officer and
Mr. Gireesh Kumar, Production Manger, for their continuous help and motivation
which help to me complete my study successfully.
Last but not least I thank my bellowed loving friends and all those helped
me in completing the study.
Taliparamba Arts & Science College,Kanhirangad 3
Project Report 2006 Dept. of BBM
CONTENTS
CHAPTER HEADING PAGE NO.
1 INTRODUCTION 5
2 AREA WISE ANALYSIS OF HANDLOOM IN KERALA
10
3 RESEARCH METHODOLOGY 16
Objectives of the study
Research methodology
Limitations of the study
4 COMPANY PROFILE 18
5 DEPARTMENTS IN THE SOCIETY 37
6 PRODUCTION DEPARTMENT 40
7 MARKETING DEPARTMENT 43
8 PERSONNEL DEPARTMENT 62
9 FINANCE DEPARTMENT 72
10 PURCHASE DEPARTMENT 79
11 QUALITY CONTROL DEPARTMENT 86
12 FINDINGS AND SUGGESTIONS 93
13 CONCLUSION 96
Taliparamba Arts & Science College,Kanhirangad 4
Project Report 2006 Dept. of BBM
CHAPTER I
INTRODUCTION
Taliparamba Arts & Science College,Kanhirangad 5
Project Report 2006 Dept. of BBM
INTRODUCTION
The handloom was devised about 2000 Years ago and was brought to
England by the Romans. The process consisted of interlacing one set of threads
of yarn (the warp) with another (the weft). The warp threads are stretched
lengthwise in the weaving loom. The wefts, the cross-threads, are woven into the
warp to make the cloth.
Weaving remained unchanged for hundreds of years until John Kay
devised the flying shuttle. This enabled a weaves to knock the shuttle across the
loom and back again using one hand only. The speed of weaving was doubled,
and a single weaver could make cloths of any width, whereas previously two men
hand sat together at a loom to make broad cloth. By 1800 it was estimated that
there were 250000 handlooms in Britain.
Kerala, the greenish land lies between the western ghat and Arabian Sea,
about 15000 square miles with varying scenic beauty. Kerala is known as the
epitome of India. Historically Kerala has long been a land of racial mixture and
co-existence.
The milestone in Kerala’s history is that by first Christian church, First
Muslim mosque and first synagogue were established in Kerala. A number of
historically important Hindu Temples can be seen in Kerala.
Tolaracne and cosmopolitan out look are the characteristics of a “Keralite”.
This may be attributed to the religious and trade contract, which existed for
centuries with out side India. Handicraft handloom weaving, ivory works, Weaving
of coir are well known heritage of Kerala.Kerala handloom industry carries a vital
role in states economy as well as in the field of employment.
Taliparamba Arts & Science College,Kanhirangad 6
Project Report 2006 Dept. of BBM
A very large number of looms are located in rural areas. The rhythm of
handloom can be heard in almost every village in Kerala. There are men and
women weavers for whom weaving is a way of life. In early days majority of
handloom weavers followed the hereditary line. The main communities engaged
in weaving are saliyas and devangas. With the available information it is clear
that the saliyas and devangas migrated from the near by princely states.
Earlier they were producing cloth for their own consumption and for the
need of their village. Increase in production and improvement in transport
facilities removed the hindrances of time and easy the exchange of commodities.
The skill of weaving has been passed from parents to children.
During 15th century, British, French and Portuguese people visited Kerala.
The things like spices, ivory and beauty of handloom fabrics attracted them. They
began to purchase large quantities and exported to their countries.
Germany has established a mission called ‘Basal mission’ in 1829. This mission
paved the way of changing form home production to factory system. Apart from
this, French people started to give training in weaving. The imported versatile
loom and introduced principle designs from hooks.
After the British captured India they took up and nourished handloom
industries fro the purposes. At the end of 18 th century the monopoly came to an
end. Since 19th century with the advent of Industrial revolution, The English
people gave up all. They started mechanical production in their land during this
period of foreigners the weavers of Kerala learned al techniques and they
paralleled the way for the production of furnishing fabrics according to the new
style of demand.
During the dawn of 20th century, the Sree Narayana movement influenced
Kerala society by and large prompting the caste-based culture to change towards
Taliparamba Arts & Science College,Kanhirangad 7
Project Report 2006 Dept. of BBM
secular and modern industrious culture. So that many people from traditional
Thiyya/Ezhava community had take up their employment in handloom industry to
do away with the to day tapping to respond with the advice of Sree Narayana
Guru. These changes also have its own mark in making the present shape of
Kerala handloom industry. It has resulted in the production of various types for
artistic handloom goods in Kerala.
The women all over India for their fineness of count and natural colours,
texture and gold borders praise the ‘Kerala Kasavu Sarees’. Kerala is also known
for its unbleached cotton handloom crepe popularly known as ‘Kora’ cloth this
has entered in the foreign market and occupied a proud place in the garment
industry.
The secret of furnishing fabrics from Malabar is the excellent structure and
texture of the cloth, unique colour combination, wide width (98” - 120” ) and
craftsman ship. When we look back to the history of Kerala, it can be seen that in
1498 vascode Gama, the Portuguese navigator visited Calicut in Malabar. So it is
well known that 15th century handloom cloths of excellent qualities were exported
to Asian and European countries.
Balaramapuram, in Thiruvananthapuram district is the most historically
important place for handloom fabrics. The weavers belong to saliyas were
migrated from Nagar Coil and Thirunalveli in Tamil Nadu during the time of
Balarama Varma before 250 Years. Here they produced super fine ‘Mundum
Neriyathu’, for the need of royal family. Still they are existence and carry
important part of the total production. The technique of producing superfine
fabrics spreaded from them to the local weavers in Balaramapuram and
surrounding places. Initially they were producing ‘Mundu’ for men with 0.4cm of
width of “Kara” (cross border) with black yarn. Before 100 years the jeri from
Surat takes to Balaramapuram and “Kasavu Sarees” production was started.
Taliparamba Arts & Science College,Kanhirangad 8
Project Report 2006 Dept. of BBM
Koothampalli in Thrissur district is also well known for handloom fabric.
Here Devangas immigrated from Karnataka are engaged in weaving. The
‘Kasavu Sarees’, which are being produced here, is mostly with half fine jeri. The
middle class people would like to purchase this sarees because of its cheapness.
The price of a saree can be reduced from 5000 to 1000 by using half fine jeri
instead of pure jeri.
Chendamangalam, in the Eranakulam district is also an important
handloom center in Kerala. Here they have been producing the double and
‘Mudnu’ and ‘Neriyathu’. The distinction of these fabrics is in its structure in the
plain structure, they have producing a special effect in weft direction.
Taliparamba Arts & Science College,Kanhirangad 9
Project Report 2006 Dept. of BBM
CHAPTER II
AREA WISE ANALYSIS OF HANDLOOM IN KERALA
Taliparamba Arts & Science College,Kanhirangad 10
Project Report 2006 Dept. of BBM
AREA WISE ANALYSIS OF
HANDLOOM IN KERALA
Kerala has 14 districts from Thiruvananthapruam to Kasargod. The
handloom industry is spread allover the state. But the handloom industry is
concentrated in certain places. The southern Kerala is famous for its superfine
products, like sarees, dhothies and ‘Set Mundu’ etc. The middle Kerala also
engaged with such products. Btu while going to northern side called Malabar the
main production changed to coarser verities like furnishing items, spreads, towels
etc. The common production in Kerala is ‘Thorthu’ (bathing towel) and ‘Lungies’.
Almost two lakhs of weavers are earning their livelihood from handloom 75% of
the mare in the co-operative line. Almost five lakhs families are depending upon
handloom industry.
A district wise analysis gives us a clear out idea about the places where
handlooms are concentrated and the places, which are important for traditional
verities.
1. THIRUVANANTHAPURAM:
The capital city has its own historical importance. And in the map of
handloom also it has an important place. There are 349 societies and 44700
weavers are working with their looms. The main products of district are fine
cotton textures; during with special design Balaramapuram is very famous for its
fine grey sarees with Kasavu (Jeri). The other products here are set mundu
‘mundum neriyathum’- (Traditional dress for a malayalee lady) ‘Mundu’ (dhothi for
men), Earezha thorthu (bathing towel) ‘Melmundu’ etc. Other places where
handloom concentrations are Parassala the south most of Kerala where weavers
are involved in weaving of sarees, dhothis, etc. Cheravinkeezhu, Kulathur are the
other places where handloom density places. Here also the productions are as
explained above be range of counts is 60s – 120s. The jeri used here is superfine
one.
Taliparamba Arts & Science College,Kanhirangad 11
Project Report 2006 Dept. of BBM
2. KOLLAM:
The very old city has few handloom production places. Her almost 80 co-
operative societies with 10271 registered weavers with their looms. In this district
almost all varieties produced in Kerala are produced in small scale. In olden days
the Kollam was an important port in south India. So the effect of exporting items
are effected the weaves in Kollam district Lungies, Furnishing items, Erazha
Thorthu, Sarees, Dhothies are the main products. Terry towels, Jacquard durries
we also produced.
Kollam, Karunagappally, chathannur, are the main places related to
handloom in the district. The products from these places are mainly for domestic
market. Therefore colours, fashions etc of these products suit the domestic
market.
3. PATHANAMTHITTA:
There are seven co-operative societies and 165 registered looms are here.
With these 281 weavers are earning their livelihood. In this district the main
products are lungies and dhothies.
4. ALAPPUZHA:
Alappuzha is very famous for its coir products. Coir weaving also done
with the hands only. But its is considering as another wing. The main products in
these centers are mainly dhoties, sarees, lungies, erazha thorthu, etc. There are
25 co-operative societies with looms and 2309 weavers in this district.
5. KOTTAYAM:
In Kottayam district the main products are Earezha Thorthu, Panimundu,
and Lungies. They are also producing bed sheets and sarees. There are 16
societies with looms and 1853 weaves are here. Kidangoor, Karingannoor, are
main centers.
Taliparamba Arts & Science College,Kanhirangad 12
Project Report 2006 Dept. of BBM
6. IDUKKI:
In this district there are 11 societies and 414 weavers with their looms. The
main products are sarees, lungies etc.
7. ERANAKULAM:
‘Chennamangalam Sarees’ is famous in Kerala. This fine grey sarees are
the product of Eranakulam District. The main products are super fine double
dhothies, synthetic and silk sarees, matching set etc. In Paravoor 120s fine
double dhothies are produced. In east Eranakulam, earzha thorthu, and cheaper
variety bed sheets are produced. There are 30 societies and 8494 weavers with
their looms.
8. THRISSUR:
The cultural capital of Kerala has an important role in the tradition of
Kerala. Here a traditional variety named ‘Koothampally Saree’ is produced.
Koothampally is a place situated in Thrissur. The productions are set mundu,
woven with half fine jeri., Dhothies, Lungies are also produced in this district.
There are 30 societies in Thrissur and 6052 weavers.
9. PALAKKAD:
In this district is handloom weaving is very popular Chittur, Pudunagaram,
Kollengode, Peruvemba, Karimpuzha are some of the handloom concentrated
place situated in the district. Here main products are sarees, dhothies, lungies
etc. here silk sarees production also started recently. There are 45 societies and
11236 weavers depending on the handloom weavers with their looms.
Taliparamba Arts & Science College,Kanhirangad 13
Project Report 2006 Dept. of BBM
10. MALAPURAM:
A number of Muslim weavers are here. The main places are Tiroor, etc.
The main products are furnishing items, which influenced from Calicut and
sarees, lungie. There are 13 societies and 2774 weavers.
11. KOZHIKODE:
The district from Malapuram to Kasaragod known as Malabar. The
famous “Malabar loom” came from this place only. The other famous of this place
is, in olden days famous “calico cloth” came from Calicut only. In olden days
foreigners established some companies. Some of them remaining now also.
“Common wealth Trust” which is situated in Calicut is one such company. The
main products are mainly meant for export. Furnishing, Jacquard products, Bed
sheet, Tablemats, coarser varieties etc. The products are mainly coming from
Malabar loom.
The products from Kozhikode have an excellent value in domestic market
also. The main centers are Kozhikode, Qualandi, Vatakara, Chombal, and
Maniyur etc. There are 41 societies (most of them are industrial societies) are in
this district.
12. WYANAD:
There is not that much important in this high range. There are only four
societies in this district and 136 weavers. The products will be a part of Calicut
and Kannur.
13. KANNUR:
Kannur is called as “the Manchester of Kerala”. The famous Kannur sports
shirting, varieties like crepe is the donation of this district. The weavers are
mainly working industrial societies.
Taliparamba Arts & Science College,Kanhirangad 14
Project Report 2006 Dept. of BBM
For export of handloom products Kerala mainly depending upon the products
from Kannur. The main products are shirting, made-ups, Jacquard, Furnishing,
Turkish towels, Sateen sheets, Crepe such export oriented and Lungies, Earzha
thorthu etc for domestic purpose. The products are coaser varieties Kannur
Mundu are a popular variety.
The main centers are Kannur, Azhikode, Chirakkal, Kanhirode, Irinav,
Morazha, Mayyil, Panoor, Kuthuparambu, Kalyassery, and Pappinissery etc.
There are 73 societies established in this district and with about 50 exporters in
private sector together have, 13667 weavers working this field.
14. KASARAGOD:
Kasaragod is the north most district in Kerala. Here sarees are produced
and export varieties also produced here. Kasaragod, Mancheswaram are main
centers. 11 societies are here and 3401 weavers working in there societies.
Kasaragod sarees are very famous in Kerala. Now a days there is a very
good demand for the silk sarees woven with different colours pattern and
ornamented sarees.
Taliparamba Arts & Science College,Kanhirangad 15
Project Report 2006 Dept. of BBM
CHAPTER III
RESEARCH METHODOLOGY
Taliparamba Arts & Science College,Kanhirangad 16
Project Report 2006 Dept. of BBM
RESEARCH METHODOLOGY
OBJECTIVE OF THE STUDY:
To know about the administration and management of KWCS.
To know about the production processes carried out in the KWCS.
To know about the personnel policies of the KWCS.
To known about the marketing strategies of the KWCS.
To know about the quality control measures used by KWCS.
To known about the financial policy of the KWCS.
RESEARCH METHODOLOGY:
Primary data is collected through personal interview with manager,
secretary, and other staff of the society.
Interactions with various departmental heads and supervisors.
Secondary data is collected from company’s annual reports and other
published materials.
LIMITATION OF THE STUDY:
A detailed study could not be made due to time constraints.
A comparative study with a similar concern was not made.
Taliparamba Arts & Science College,Kanhirangad 17
Project Report 2006 Dept. of BBM
CHAPTER IV
COMPANY PROFILE
Taliparamba Arts & Science College,Kanhirangad 18
Project Report 2006 Dept. of BBM
COMPANY PROFILE
The Kanhirode weavers co-operative P & S society is one of the main
handloom manufacturing unit in Kerala. This society is registered as a co-
operative society under the Act of VI of 1932 (Madras) on 16-9-1952 and started
its function on 05-10-1952. At that item it’s paid up share capital was only 10,130
Rupees. It is also known as “weaveco”.
The main object of the society is to provide regular employment to poor
workers at a reasonable wages and there by improving the standard of living and
economic conditions of the weavers.
In the initial period, the company ahs only 200 members and they
produced “Thorth” and “Pudava”. They sold these products in their locality by the
weavers. Later bullock cart have used to carry these goods.
The society is engaged for manufacturing various kinds of cotton fabrics.
Which is suitable for export market as well as local market. The 1964-65’s was
the period, which gave the society a hope to shine in the textile world and they
started to produce shirting, lower count lungies. Which were sold different parts of
the country through agents.
During 1973-74, the society started to producing crepe fabrics which
attached orders of merchant exporters. Then again started production of
furnishing fabrics suitable for export market and the products to merchant
exporters.
The Kanhirode weavers co-operative society is an ISO 9001-2000 certified
company. It is the first ISO certified handloom co-operative society in the state.
The society has very good market for its products.
Taliparamba Arts & Science College,Kanhirangad 19
Project Report 2006 Dept. of BBM
The society’s address shall be Kanhirode village, Kanhirode post in the
Taluk of Taliparamba, in the cannanore district. Its operation shall be confined to
Kanhirode and Kuttiatoor Amsam in Taliparamba Taluk, Munderi and
Anjarakandy Amsams in Kannur and Koodali in Tellichery Taluk.
The company having workforce of 500 workers and 300 working looms
with various width capacity from 48-90 inches. It includes five looms for silk. They
are also having 30 stitching machines and two dehumidification rooms to keep
the geniuses of fabrics.
Majority of the society employees are females. There by ensuring the
economic freedom of the major households in around the locality.
The company mainly producing different items like lungies, shirting, saten
and printed bed sheet, bed spread, Dhothies, Towels, Thorth etc. for local market
and furnishing fabrics, jacquard items, shritings, crepe, bed sheet, table cover,
Napkin, Cushion covers etc for export markets. For the last 8 years the company
engaged in direct exporting. The earn 75% of profit from international markets.
They produced goods on the basis for customers requirement.
For the diversification of products, the company had established a silk
weaving centre, and a jute development center, quality dyeing unit etc. the
society had availed financial assistance from central and state government for the
following purposes.
1. Working capital for handloom development centre.
2. Silk weaving unit.
3. Quality draining unit.
4. Project package scheme.
5. Jute development centre.
Taliparamba Arts & Science College,Kanhirangad 20
Project Report 2006 Dept. of BBM
The important requirements for any business activities are land, labour,
capital and organization. This company ahs permanent building and adequate
workforce, storage places and other working environment requirements as per
the factory act of Land. The company also has adequate equipments for
manufacturing as well as other documentation requirements like computer and
other accessories. Al these facilities are very helpful in the success of this
society.
The society has a better working environment. The workers enjoy the best
working atmosphere. Like space, machinery, wages etc. fabrics and made-ups
manufacturing is not hazardous to the personnel involved in it. How ever the
company strictly supported to all mandatory requirements of safety like fire
extinguishers, first aid facilities.
LOCATION OF KWCS.
Kannur, “city of Looms and lores” lies in northern part of Kerala. The
kanhirode weavers co-operative P & S society Ltd. is located at Kudukkimotta.
This place is 15KM away from Kannur and it is near to the Mattannur.
VARIOUS FECILITIES AVAILABLE IN THE KWCS.
Cabinet dyeing machine with capacity of 250 Kg.
Dyeing chamber with capacity of 500 Kg.
300 working looms with up to 90 inches.
10 numbers silk weaving loom width up to 90 inches.
Dehumidification rooms for moisture control of fabrics.
In house stitching unit with 30 numbers juki machines.
VISION OF KWCS
Taliparamba Arts & Science College,Kanhirangad 21
Project Report 2006 Dept. of BBM
A complete range of handloom fabrics inheriting age-old tradition of classic
warp weft combinations importing modern chrematistics of convenience without
compromising up on the core values of quality.
The fabric range has been created through adequate research and
expertise that will enable Indian textile to acquire a competitive edge in global
market.
AWARDS GOT BY KWCS:
1. The first ISO 9001-2000 certified primary handloom co-operative society in
the state.
2. The contribution of the society in the field of craftsmanship was well
appreciated and awarded with GOLD MEDAL for the BEST
PERFORMACNE by the ministry of textiles, Govt. of India during 1993-94.
3. The Govt. of India had selected this society for participation in international
Trade Fair at Frankfurt, Germany during 1995 and 2004.
Taliparamba Arts & Science College,Kanhirangad 22
Project Report 2006 Dept. of BBM
MEMBERSHIP
The liability of the members of the society shall be limited to the share
capital subscribed by them.
The capital of the society shall for the present be Rs 4000000/- made up of
40000 shares of Rs 100/- each. The value of each share shall be paid either in
one lumsum on allotment, or installment, when paid in installment Rs 25/- shall
be paid at the time of taking share and the balance in five months commencing
from the months subsequent to that in which share was taken. In the case of
weaver members, installment maybe collected, as stipulated in bylaw 16 CA. The
monthly installments shall be paid on before 15th day of the months to which it
relates.
Application for admission as members and for allotment of shares shall be
made to the secretary in the form, if any, prescribed by the society for the
purpose. The Board of Directors who shall be disposed of by the Board of
Directors who shall have power to grant admission or to refuse it without
assigning reasons shall dispose of every such application.
Every member shall take at least one share, but no member shall take
more than 50 shares. But this application is not applicable for the share
participation by the Government of Kerala. In very member except govt. of Kerala
shall pay on entrance fee or Rs 5/- for each share taken by him, at the time of
taking the share, provided that the total payment of entrance fee by any member
of all the shares held by him shall not exceed Rs. 5/-.
No member shall be permitted to withdraw any of the shares held by him
in the society with in three years after the date when he took such shares. But a
member may with draw shares with the consent of the board of directors after
such period, provided, firstly that he has given at least six months notice of
Taliparamba Arts & Science College,Kanhirangad 23
Project Report 2006 Dept. of BBM
withdrawal, secondly that the total amount of share capital that is permitted to be
withdrawn in any one year does not exceed 10 percentage of the aggregate paid
up share capital of the society, as it was on June 30 th proceeding, thirdly that
there are no debits due to the society and fourthly, that there are no debts due to
the society in regard to which he has stood surety. When a member withdraws
shares under this bylaw, he shall be paid back the share capital actually paid by
him with the dividend declared if any.
The Govt. of Kerala shall have the right to withdraw the share participation
in the society at any time with out assigning any reason thereof.
A past member shall be liable as provided in bylaw 3 for the debts due by
the society, as they existed on the date when he ceased to be member, for a
period of two years from such date.
The estate of a deceased member shall be liable as provided in the bylaw
3 for the debts due by the society, as they existed on the date of his decease for
a period of two yeas after his decease.
No member shall be permitted to transfer his share or shares or create a
charge in respect of the same in favour of another member or person except with
the previous sanction of the Board of Directors.
Taliparamba Arts & Science College,Kanhirangad 24
Project Report 2006 Dept. of BBM
MANAGEMENT OF THE SOCIETY
Subject to such resolutions as the general body may from time to time
pass the Executive Management of the affairs of the society shall vest in a Board
of Directors. The Board of Directors shall consists of not more than a members of
whom 7 members shall be elected as stipulated in bylaw No. 20 and the two
members shall be nominated by the District industries officer from his staff and
their term of office shall be subject to the direction of the District Industries
Officer.
The members of the board of directors shall be elected as per the rule 35
of Kerala co-operative rules for a period of five years from among the members
for the period of the members of the Board the year shall begins from the date of
assumption of the office. A retiring member of the Board shall be eligible for re-
election. After the member of the Board of Director are elected they shall elected
from among themselves a president and a vice-president.
All the members of the Board of Directors shall vacate their offices on
completion on their term of five years unless the period is extended by the
Registrar under sub-rule (2) of Rule 39 of the Kerala Co-operative Rules. All the
members of the board of directors shall be elected at one and the same time for
the specified period of five years. Any interim vacancy or vacancies, which has
not been filled, may be filled up by the election as per rule 35 of Kerala co-
operative rules for the unexpired portion of the original period. The proceedings
of the board of directors shall not be invalidated on account of any vacancy or
vacancies of the board that remain unfilled.
Any member of the board of directors may at any time resign from his
office by sending a letter of resignation to the secretary of the society but such
resignation shall take effect only from the date of the society but such resignation
Taliparamba Arts & Science College,Kanhirangad 25
Project Report 2006 Dept. of BBM
shall take effect only from the date on which it is accepted by the board of
directors. The board shall appoint a full time paid secretary from among suitable
qualified persons approved by the general manager. District industries officer,
Kannur. The secretary shall not have a seat in the board.
The board of directors shall meet once a fortnight or oftener, if necessary
to conduct the affairs of the society. The president or in his absent. Vice-
president shall preside over the meeting of the board. In the absence of the both
a chairman shall be elected from among the members present. The quorum for
the directors meeting is four. All the questions before the board of directors shall
be decided by a majority of votes. Should there be an equality of votes the
president or other presiding members shall have a casting vote. No member of
the board of directors shall be present at any meeting of the board of directors
shall be present at a meeting of the board when any matter in which he is
personally interested 15 being discussed. In case of urgency where there may
not be sufficient time to convene a meeting of the Board of Directors and in all
case in which such a procedure may from time the secretary may obtain the
orders of the Board of Directors by circulation of papers among members present
at the headquarters of the society such division arrived at by circulation shall be
placed before the next meting of the board of directors for their rectification. It
should a difference of opinion arise in the course of such circulation the member
shall not be decided by the circulation but shall be placed before a meeting of the
Board of Directors.
Any member of the Board of Directors who commits default in respect of a
loan taken by him from the society shall ipso facto be considered disqualified to
continue as an office bearer. But if the default has been for a period of 3 months
or less, the defaulter may reinstated by the General body on his showing good
cause for the default. In no circumstances a defaulter continue to hold office as a
member of the board of directors if his default has continued for more than three
months.
Taliparamba Arts & Science College,Kanhirangad 26
Project Report 2006 Dept. of BBM
Receipt shall be issued for all moneys paid to the society. For moneys
paid by members the receipts shall be signed by the president or the secretary,
or the manager who ever is selected by the board of directors to discharge his
function. In the case of borrowing from non-members or from other society the
receipt of the bond shall be executed by at least four members of the board of
directors of whom the president shall be one.
The board of Directors shall have power to prescribe from time to time the
scale of office establishment and to inure such expenditure as may be necessary
for the management of the society with reference to the scale and with in budget
allotment sanctioned by the general body for each year which will be subjected to
the approval of the Dy. Registrar. It shall be competent to the secretary to insure
the peti contingent expenditure subject to a maximum of Re. 1/- for any time. The
board of directors shall be competent to fix the amount and nature of the security
if any, to be given by the office establishment, as prescribed by the Registrar.
The services of the members of the Board of Directors shall be gratuitous
except as provided under bylaw 50. They shall be eligible for sitting fee for
attending the board, sub-committee meeting and the president shall be eligible
for a daily allowance for attending the office. The board of directors shall also
eligible for Traveling allowance for the journey performed in connection with the
affairs of the society. The rate of sitting fees, daily allowances and Traveling
allowances should be fixed by the committee and approved by the registrar.
Taliparamba Arts & Science College,Kanhirangad 27
Project Report 2006 Dept. of BBM
BOARD OF DIRECTORS OF KWCS
1. Sri. Kala Balan : President
2. Sri. K. K. Narayanan : Vice-President
3. Sri. K. Rameshan : Director
4. Sri. M. Pavithran : Director
5. Sri. V. M. Rajan : Director
6. Sri. P.P. Kumaran : Director
7. Sri. P. P. Kumaran : Director
8. Smt. P. Sumithra : Director
Taliparamba Arts & Science College,Kanhirangad 28
Project Report 2006 Dept. of BBM
COMPANY ADDRESS
Name of the Company: The Kanhirode Weavers co-operative
P & S Society Ltd., No. L.L.44
Registered Office: Kanhirode (P.O),
Koodali (Via)
Kannur Dist.,
Kerala – 670592
India
Telephone: 0497-2857259
0497-2857865
Fax: 0497-2858546
E-Mail: [email protected]
Website: www.weaveco.com
Bankers: Kannur Dist. Co-operative Bank.
SBI
SBT
Auditors: Dept. Co-operative society,
Asst. Registrar office, Kannur.
Taliparamba Arts & Science College,Kanhirangad 29
Project Report 2006 Dept. of BBM
PRODUCT PROFILE
The Kanhirode Weavers co-operative P&S society Ltd. produced different
types of handloom products for local market and international market. They are
as follows.
For Local Market:
Lungies
Shirtings
Satin and printed bed sheet
Dhothies
Towels
Thorth
Saree
International Market:
Furnishing Fabrics
Jacquard items.
Shirtings.
Crepe
Bed sheet
Bed spreads
Table cloth
Napkins
Cushion covers
Curtains
Sofa cases
Sofa covers
Floor mats
Bolster
Taliparamba Arts & Science College,Kanhirangad 30
Project Report 2006 Dept. of BBM
ACTIVITY CHART OF KWCS
Taliparamba Arts & Science College,Kanhirangad 31
Buyers order Yarn Purchasing Boiling
Inspection
Vertical warping Bobbin winding Dyeing
Beaming
Sewing
Drawing & Denting Pirn winding
Cutting Weaving
Inspection
Button holing & buttoning Pressing
Finishing & Packing
Inspection
Billing Stock entry Pricing
Dispatch
Project Report 2006 Dept. of BBM
ORGANISATION STRUCTURE
Taliparamba Arts & Science College,Kanhirangad 32
Board of Directors
President
Secretary /CE
Management Representative
Manager Export & Administration
Weaving Master
Dyeing Master
Business Manager
Production Manager
Q.A Supervisor
Quality controller
Store Keeper finishing works
Accountant Accounts Assistant
Project Report 2006 Dept. of BBM
AUTHORITY AND RESPONSIBILITY
1. President:
He is responsible to:
To take policy divisions of the company.
To make investment division, long term financial commitments and
diversification plan of the company in consultation with board of directors.
2. Chief Executive/Secretary:
He is responsible to:
Define and document the company’s quality policy and objectives.
Provide adequate resources for implementing QM.
Discharge the duties of purchase manager.
Over all operations of the company.
Allocation of various resources to the different departments.
Assessing the training needs of the HOD’s and initiates training programs.
New customer development.
Attend the fair ad develop new markets and new customers.
Procure orders for the company.
Handling customers complaint.
Define company’s long-term business plans.
3. Management Representative:
Establish, implement, maintain and monitor quality system.
Control the distribution of QM, SOP, WI and TAD.
Plan and arrange internal quality audit.
Co-ordinate the activities concerned with the external agencies.
Responsible to reporting to the top mgt on the performance quality
management.
Taliparamba Arts & Science College,Kanhirangad 33
Project Report 2006 Dept. of BBM
4. Manager-Raw material purchase:
Establish and document specification for raw materials and accessories.
Assess the availability of raw materials and accessories as per the
requirements.
Purchase the raw material through purchase orders.
Development the new raw-material suppliers.
Acts as a factory manager.
Maintain inspection status of raw materials and accessories in the store.
Production, planning and control activities.
Responsibility for issues of materials, stock updating, and material
reconciliation for yam, dyes and chemicals.
5. Weaving Master:
Plan and execute the production activities at the weaving production units.
Allocation of work to various workmen.
Ensure the product characteristics during production.
Assess the training needs of the work force in weaving dept.
Initiate the corrective action in the dyeing and weaving dept.
Preserve the approved samples/customer samples with proper
identification.
Acts as custodian of grey and dyed yarns.
Maintenance of weaving machines.
6. Quality Assurance supervisor (QAS):
Ensure inspection of yarn, dyes and chemicals accessories, and fabrics,
made up and garments at all stages.
Maintain inspection status of raw materials in process and finished goods.
Taliparamba Arts & Science College,Kanhirangad 34
Project Report 2006 Dept. of BBM
Arrange proper handling, storage and presentation of raw materials and
accessories.
Prepare suppliers evaluation record.
7. Production Manager:
Develop new samples as per the requirements communicated by CE.
Develop designs from the existing samples.
Prepare costing details of samples.
Ensure the all required accessories are available in the unit before made-
ups the production started.
Initiate the corrective action and preventive action as necessary.
Help the CE in the mater of matter of marketing activities.
Responsible for verification of yarn, dyes and chemicals.
8. Dyeing Master:
Production, planning and control in the dyeing dept.
Maintenance of the dyeing machines.
Prepare the recipe as per the shades required.
Maintain the master shade card.
Approve dyed yarn before issued to further processing.
Safe keeping of dyes and chemicals in procurements.
9. Manager Export & Administration:
Handle all export/import and banking formalities.
Liaise with clearing agents regarding the shipments of merchandise.
Communicate with customers.
General administration of the company.
Carry out stock verification activities.
10. Business Manager:
Taliparamba Arts & Science College,Kanhirangad 35
Project Report 2006 Dept. of BBM
Assist secretary to procure orders.
Assist the secretary to co-ordinate with buying houses and buying
agents.
Assist the secretary to handle customers complaints.
Taliparamba Arts & Science College,Kanhirangad 36
Project Report 2006 Dept. of BBM
CHAPTER V
DEPARTMENTS IN THE SOCIETY
DEPARTMENTS IN THE SOCIETY
Taliparamba Arts & Science College,Kanhirangad 37
Project Report 2006 Dept. of BBM
The Kanhirode weavers co-operative society is one of the famous
handloom products manufacturing society in Kerala. This society working under
the co-operative societies act. The overall control of the society is the secretary of
the society controls came under the board of directors and all day-to-day
activities.
This society has different departments for functioning different specialized
activities. The main departments in this society are production department,
Finance departments, Marketing departments, Personnel department, Quality
control department and purchasing department.
Weaving and dyeing are the main production process in the society. They
produce different types of handloom products for local market and international
markets. The foreign countries have heavy demand in handloom products so
they mainly concentrated in export marketing.
Production is the main activity in the society. The production department
functioning very well in this society. They are designing and producing quality
products as per the requirements of the parties for local market and international
market. They utilise the equipments, labours and other facilities in the society in a
maximum manner and to make uninterrupted production of goods.
The finance department of in the society, prepare various financial
statements like trading ale, P & L ale, Balance sheet etc. This society has its own
finance department under a financial manager.
The marketing department concerned with the marketing of the goods
produced by the society. It is one of the important functions in an organization.
The efficient marketing department helps to achieve the organizational
objectives. It is very important in handloom manufacturing
Taliparamba Arts & Science College,Kanhirangad 38
Project Report 2006 Dept. of BBM
Industries. The problem of marketing is greatly affecting the industries in India,
especially in Kerala. Many cotton mills and cotton textile industries are closed
due to the inefficient management of the marketing area.
Personnel department is concerned with the obtaining and maintaining of
a satisfied and satisfactory work force in an organization. It is an extension of
general management. The primary objective of this department is to satisfying
employees and achieving organizational objectives. This society provides various
welfare measures to its employees for motivating them.
The quality control department plays an important role in an organization.
This society has an efficient quality control department headed by the quality
assurance supervision (QAS). This department checking raw materials, work-in-
progress and finished goods and to ensure the quality. It conducts various tests
for ensuring quality.
The main raw materials used in the production like yarns, dyes, and the
purchasing department purchases chemical. This department purchase material
on the basis of quantity of production. They mainly purchased materials from
National Handloom Development Corporation (NHDC). It may be either on cash
or on credit basis.
Taliparamba Arts & Science College,Kanhirangad 39
Project Report 2006 Dept. of BBM
CHAPTER VI
PRODUCTION DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 40
Project Report 2006 Dept. of BBM
PRODUCTION DEPARTMENT
Among all the functional areas at management, production is considered
to be crucial in any industrial organization. Production is the process by which
raw materials and other inputs are converted into finished goods. It means
generation of goods or services to satisfy customer’s needs. The other word
synonymously used with production is manufacturing. Manufacturing is
understood to refers to the process of producing only tangible goods. Where as
production include creation of both tangible goods as well as intangible service.
Production management refers to the application of management
principles to the production function in a factory. In other words production
management involves application of planning, organizing, directing and
controlling of to the production process.
The application of management to the field of production has been the
result of at least three developments. First is the development of factory system
of production. Until the emergence of the concept of manufacturing, there was no
such thing as management as we know it. It is true that people operated business
of one type or another, but for the most part these people were owners of the
business and did not regard themselves as managers as well. The second
essentially stems form the first, viz, the development of the large-scale
organization with many owners and the necessity to hire people to operate the
business. The third reason stems from the work of many of the pioneers of
scientific management who were able to demonstrate the value from a
performance and profit point of view, of some of the techniques they were
developing.
The production department is normally under a production manager. He
assists the production functions. The production manager is the co-ordination link
between production department and the society.Production department must
work in coordination with planning as that both of the production target and as
estimated by the objectives are achieved.
Taliparamba Arts & Science College,Kanhirangad 41
Project Report 2006 Dept. of BBM
The production department maintenance the progress of different departments in
the society. The production manager has to the responsibility to the co-ordinate
the availability of raw-materials, machines, labours etc. and also fore cast any
possible delays which could affect the production. The efficient working of the
production department can prevent delays before they arise and there by
ensuring maximum utilization of production capacity.
The inspection department in factory has a major responsibility in as much
as it has to estimate loses due to low quality material purchasing, control in time
all detective production and ensure quality of raw materials, work in progress and
finished goods. A good inspection department is very helpful for achieving
production quality.
PRODUCTION SYSTEM IN KWCS LTD.
The kanhirode weavers co-operative P & S society produces different
types of handloom products for local market and international market. They
produce products on the basis of orders. This society has its own production
factory with inches looms. There are 345 workers are engaged in production
process. They produce pure cotton products with different colours and designs on
the basis of order received from parties.
The main raw materials used in the production are;
Yarns
Dyes
Chemicals
Accessories
Taliparamba Arts & Science College,Kanhirangad 42
Project Report 2006 Dept. of BBM
They purchase these raw materials from Government agencies, National
Handloom Development corporation (NHDC) and also purchase materials from
private firms. At the time of purchase materials from NHDC, they provide different
subsidies. The purchase of raw materials either on cash or on credit basis. The
purchase department does this.
Taliparamba Arts & Science College,Kanhirangad 43
Project Report 2006 Dept. of BBM
PRODUCTION CAPACITY
SCOURING
IN HOUSE 6000 Bundles/Month
BLEACHING & DYEING
IN HOUSE 6000 Bundles/Month
WEAVING
Width Monthly In house capacity Monthly outsource
100 Inches 500 Mts 2000 Mts
90 Inches 500 Mts 2000 Mts
72 Inches 1000 Mts 2000 Mts
60 Inches 3000 Mts 3000 Mts
54 Inches 1000 Mts 2000 Mts
48 Inches 2000 Mts 2000 Mts
36 to 42 Inches 2000 Mts 2000 Mts
JACQUARD
60 Inches 1000 Mts 3000 Mts
STITCHING
IN HOUSE 4 machines
OUT SOURCE 25 machines
Taliparamba Arts & Science College,Kanhirangad 44
Project Report 2006 Dept. of BBM
PRODUCTION PROCESS CHART
Taliparamba Arts & Science College,Kanhirangad 45
BOILING
DYEING
WINDING
WARPING
WEAVING
QUALITY INSPECTION
CUTTING & SWEING
Project Report 2006 Dept. of BBM
PRODUCTION PROCESSES IN KWCS
The main production processes in Kanhirode Weavers Co-operative
society Ltd. are as given below.
Boiling
Dyeing
Winding
Warping
Weaving
Quality inspection
Cutting & Sewing
1. Boiling
Boiling is the first step in the production process. It is done for removing
the impurities present in the yarn used for bleaching and dyeing. Fro the boiling
process they use wood as fuel. The processed yarn is bleached using bleaching
powder/and hydrogen peroxide according to the requirements.
2. Dyeing
Dyeing is the process of impregnating the fiber, yarn or fabric with the
dyestuff. Dyeing can be done on the yarn, fiber or fabric. It is the method by
which colour is applied to the fabric. Usually they are dyeing the material on the
yarn stage.
3. Winding
Winding converts the package of the yarn the hank yarn is wounded on
the pirn (small bobbin used in handloom weaving) for preparing the weft. It is
done manually, especially of ladies are engaged in this work.
Taliparamba Arts & Science College,Kanhirangad 46
Project Report 2006 Dept. of BBM
4. Warping
Warping is the preparatory stage for weaving. Which prepares the yarn for
weaving. Cones of yarn are created on to a machine and winding about 500 to
700 threads produce a sheet of yarn on beam together.
5. Weaving
Weaving is interlacing of vertical yarn (warp) and horizontal yarn (weft).
Depending on the type of the weave, warp yarn sheet is divided and lifted. Weft
yarn is carried across in a pirm held in a shuttle. This is the basis weaving
process. The shuttle is thrown from one end of the warp sheet to another end by
hand.
6. Quality Inspection
Quality of the products is thoroughly checked by trained and qualified
employees. The inspection is carried out various stages such as purchase of raw
materials, during manufacturing process and final stage to assess the status of
the product for acceptance or other wise.
7. Cutting & Sweing
The made-ups are then stitched at the society. Styles are followed in
precision with great care given to detailing in each and made-ups items. This unit
has a workforce of 45 workers.
Taliparamba Arts & Science College,Kanhirangad 47
Project Report 2006 Dept. of BBM
CHAPTER VII
MARKETING DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 48
Project Report 2006 Dept. of BBM
MARKETING DEPARTMENT
The success of every business organization depends on providing right
product at right time in right quantity to the customers. Marketing deals with all
activities, which create, promote and distribute products in accordance with the
customers demand.
Marketing management is another important functional department in the
society. It is concerned with decisions and policies relating to the marketing
activities in the business. The concept to market has three inter related aspects
place; which pre supposes a convenient meeting place for the buyers and sellers.
Area aspect; which limits the market to a convenient area, the demand aspects
which implies customer demand. Marketing is the process of discovering and
translating the consumer needs and wants into products and services. And they
in turn making it possible for more and more consumers to enjoy more and more
of those products and services.
This society produced products mainly for exporting. In the society more
than 75% of the products are exported.
The KWCS Ltd produces different types of handloom products for local
market and international market.
For Local Market
Lungies
Shirting
Satin & Printed bed sheets
Dhothies
Towels
Thorth
Saree etc.
Taliparamba Arts & Science College,Kanhirangad 49
Project Report 2006 Dept. of BBM
For International Market
Furnishing Fabrics
Jacquard Items
Shirtings
Crepe
Apron
Bed sheet
Bed spreads
Table cloth
Napkins
Cushion covers
Curtains
Sofa cases
Sofa covers
Floor mats
Balster
Terry towels
Other made-ups etc.
This society mainly exported to UK and USA. And other countries are
Australia, France, Germany, Italy, Dubai, Hong Kong, Europe etc. They produce
and export these. Products on the basis of orders from foreigners. After receiving
the orders from parties and produced with high quality and then exported.
They started exporting in 1960 to 1970. At that item they exported in small
quantities. Later the major portion of productions is selling through exporting.
They export more than 75% of the total production and earn more profit.
For catching foreign customers they conduct exhibitions in foreign
countries.
Taliparamba Arts & Science College,Kanhirangad 50
Project Report 2006 Dept. of BBM
They export their products through ships and airways. Mostly they use
ship because of less transportation cost. They adopt two types of marketing in
exporting. They are,
1. Merchant Exporters
2. Direct Exporting
1. Merchant Exporters.
These are the middlemen for party and the company. The collect orders
from parties and the society receive orders from these merchant exporters.
According to these orders the society produced products.
2. Direct Exporting
In this type of export, the society directly conducts with the foreign
customers and collects orders from these parties. Then produce products on the
requirements of customers and export these products directly. This company
started direct exporting in the year 1998 on wards. Now a day they gave more
importance to direct exporting.
They earn 75% of profit in international market and earn 25% profit in
domestic market.
The 25% of products are sold in local market through dealers (deports)
and exhibitions etc. During the festival season they conduct exhibitions in various
places. They have six depots; they are in Kudukkimotta, Kanhirode, Taliparamba,
Kuttiyattoor, Kambil and Iritty.
The prices of the products are fixed on the basis of cost of production and
certain percentage of profit. They also provide 20% discounts or rebate for its
products.
MARKETING CHANNELS
Taliparamba Arts & Science College,Kanhirangad 51
Project Report 2006 Dept. of BBM
For International Market:
For Local Market:
Following are main products for local market.
1. Bed Sheet
The Bed sheet is one of the main products in local market. There are three
types of bed sheet are manufactured by the society. They are plane, printed and
check. From these printed bed sheet is of more demand in the market compared
to other two’s. The cost of printed bed sheet is high because printing charge will
be insured in it.
2. Lungies
It is of high demand in the local market the read in lungies are 60, 72, 80
and 100.
3. Shirtings
Taliparamba Arts & Science College,Kanhirangad 52
Company Merchant Exporters
Customers
Company Dealer (Deport) Customers
Project Report 2006 Dept. of BBM
The demand for shirting is very high because it is made pure cotton. The
brand name used by the society in selling the shirting items are a “weaveco”. The
company is planning to concentrate on the market of ready-made shirts.
4. Dhothies
Dhothies are two types; they are double dhothi and Kavi dhothi.
In Marketing, they function of buying implies buying raw materials by
manufacturers for use in production of buying goods by middlemen or sale to
consumers and not buying of goods by consumers for final consumption. Buying
refers to the purchase of the right type of goods in right quantity, at the right time
from the right source at the right place.
Selling is another important function of marketing. Selling include,
1. Product planning and development, forecasting consumer needs etc.
2. Searching for new uses of the product.
3. Creation, maintenance, and extension demand for goods through such
means as advertising, personal selling, sales promotion etc.
4. Negotiation with the buyers as to the terms of sale made of delivery, terms
of payment etc.
5. Entering into final contract with buyers and effecting transfer of ownership
and possession of goods to the buyers.
This company sells its products through local market and international
market. The sales turnover and export sales turnover of the company are given
below;
Taliparamba Arts & Science College,Kanhirangad 53
Project Report 2006 Dept. of BBM
SALES TURNOVER FOR THE LAST 4 YEARS.
2001-2002 Rs. 39672917
2002-2003 Rs. 37981807
2003-2004 Rs. 47115928
2004-2005 Rs. 42524980
Taliparamba Arts & Science College,Kanhirangad 54
Project Report 2006 Dept. of BBM
SALES TURNOVER CHART FOR THE LAST 4 YEARS
EXPORT SALES TURNOVER FOR THE LAST 5 YEARS.
Taliparamba Arts & Science College,Kanhirangad 55
Project Report 2006 Dept. of BBM
2000-2001 Rs. 25502166
2001-2002 Rs. 32557209
2002-2003 Rs. 26660562
2003-2004 Rs. 34262702
2004-2005 Rs. 28502695
Taliparamba Arts & Science College,Kanhirangad 56
Project Report 2006 Dept. of BBM
EXPORT SALES TURNOVER CHART FOR THE LAST 5
YEARS
Taliparamba Arts & Science College,Kanhirangad 57
Project Report 2006 Dept. of BBM
Production and consumption are linked through transportation.
Transportation is an important function of marketing. The speed and reliability of
transportation encourages the function of storage. The manufactures need
transportation for carrying machinery and raw materials to the factory. Then
finished goods have to be transported to the middlemen and finally delivered to
the consumers, at all these stages transportation is very essential. The
transportation for marketing involves the selection a particular model of transport
depending upon the speed and economy.
They mainly use road transport for carrying raw materials. For exporting
they use airways and waterways. They exported mainly through ships be cause
of less transportation cost.
Storage is an essential function at marketing. Warehousing facilitates
storage. Storage refers to the holding and preservation of gods between the time
of their production and consumption. Warehouses are large storage hours
contracted for the purpose of storing and preserving goods.
This society has its own warehouse for storing materials and finished
goods. The yarn bales received area stored off the floor count wise. The dyes
and chemicals are stored in a separate room to avoid exposure to air and
probable deterioration. It is issued on a “First-in-First out” basis. The yarn during
the wet procession is stored off the floor using bamboo stick or polythene rodes.
The processed yarn is stored safely in the designated area. The trims and
accessories are stored in the bin or racks. Packing materials are stored size wise
in a separate place. The weaving supervisor ensures proper storage of
intermediate products such as ball warp, bobbins, warp beam, and pirns at the
proper storage of pattern, cut components and finished made-ups or garments.
The export in charge ensures proper storage of final pack ages with clear
identification such as order number, package number, buyer’s name, destination
etc. The items are stored for more than one year, and it is re-Inspected to find out
the probable deterioration and to ascertaining the usability in future.
Taliparamba Arts & Science College,Kanhirangad 58
Project Report 2006 Dept. of BBM
Standardization and grading of products is essential function in marketing.
Natural raw materials require standardizations and grading in the process of
selling. Manufactured goods are standardized and graded in the process of
production itself. Standardizations refer to the establishment of certain standards
for commodity on the basis of its physical properties or quality. Standardized
goods have some quality from who ever they are bought. Standardization and
grading facilitates selling by description and sample. Cost of advertising and
sales promoting will be less standardized goods.
Package
Packaging is the out of designing and creating proper packages for
different products. A package is wrapper or container in which a product is
concluding for the purpose of sale. The main advantages of packaging are;
1. Packaging protects the goods from deterioration, expose etc during
transport, storage and use.
2. It helps to identify the product by the brand name and re collect the name
while purchasing.
3. Packaging indicates nature, weight, content etc of the product. This
provides an assurance to the customer about quality, weight etc.
4. Packaging attracts the attention of the buyers and acts as an advertisement.
5. Packaging facilities handling and use of product. This method o fusing the
product is sometimes indicated on the package.
6. Packaging helps branding as the brand name can be printed.
Taliparamba Arts & Science College,Kanhirangad 59
Project Report 2006 Dept. of BBM
STANDARD PACKING INSTRUCTIONS OF KWCS
Fabrics:
1. Roll the fabrics in paper width 61’ length and 1’ diameter.
2. Cover the fabrics in polyethylene sheet.
3. Cover the fabrics in far paper (Craft paper).
4. Pack each roll in polyethylene bags.
5. Strap two rolls tightened.
6. Cover the rolls with water paper and far paper and gunny fabrics.
7. Mark bale number. Party Name, address etc.
8. Add silica gel into bale pieces while packing.
Made-ups/cushion covers:
1. Put each pieces in polyethylene bags.
2. 10 pieces into master bags.
3. 4 Master bags into 7 ply cartons.
4. Make the cartons with number and party’s name.
5. Ad silica gel in master bags and in cartons.
Sofa case and other made-ups:
1. Bundle 5 or 10 pieces required together to one polyethylene bag.
2. 2 master bags into 7 ply cartons.
3. Mark the carton with number and party’s name.
4. Add silica gel in each master bag.
Brand Name
Branding is a marketing technique. In the society the brand name is used
in all products. Their brand name is “WEAVECO”. The products of the society
are very familiar and attractive in local market and international market.
Taliparamba Arts & Science College,Kanhirangad 60
Project Report 2006 Dept. of BBM
Advertisement
Advertising is one of the major promotional tool in marketing. Advertising is
the any paid form of non-personal presentation and promotion of ideas, goods
and services by an identified sponsor. The advertising increases the demand of
the products.
They mainly used advertisement medias are newspapers, magazines and
other published materials. The publications of co-operative and other
organizations, souvenir published during festival seasons and other cultural
events are the main media of advertisement of the society. They are selling
products directly or through middlemen.
Taliparamba Arts & Science College,Kanhirangad 61
Project Report 2006 Dept. of BBM
CHAPTER VIII
PERSONNEL DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 62
Project Report 2006 Dept. of BBM
PERSONNEL DEPARTMENT
The success of modern business organization is heavily dependent upon
the contribution made by employees as they perform the various tasks to which
they are assigned. Organizations tend to be successful when employees are
satisfied and productive in performing their tasks.
The term ‘personnel’ refers to body of persons employed in an
organization, factory, office etc. personnel management, therefore means
management of people employed in an organization. In this sense, personnel
management is related to the staffing function of management.
The basic objectives of a personnel department is to assist the
management to produce and distribute goods and service by creating, retaining a
workforce with the ability and motivation to accomplish the objectives of the
organization.
The importance of personnel management is increasingly realized in these
days, especially, in business and industry. The problems in spite of increasing
automation, the future of mankind depends on the effective utilization of human
resources. That is whey in modern industry a separate department is developed
for managing the human resources.
The personnel department is responsible for the execution of policies
regarding selection, employment, transfer and discharge of workers and payment
of wages to them. Different departments to the personnel department send
requisitions for placement of workers. The personnel department then initiates
actions in selecting personnel either locally or advertisement in newspapers.
Personnel management is an extension of general management that
promotes and stimulates every employee to make all contribution to the purpose
Taliparamba Arts & Science College,Kanhirangad 63
Project Report 2006 Dept. of BBM
of the business. The main object of human resource department is the
accomplishment of the objectives of an enterprise. It is making an uninterrupted
supply of labour force in the organization & motivates the workforce of the
organization.
In Kanhirode Weavers co-operative society, there is a separate
specialized department for managing human resources. This department is co-
coordinated by the chief executive/secretary.
The over all control of the society is carried by board of directors. The
shareholders elect the board of directors. The boards of directors are selecting
one of the directors as a president or a vice-president.
The board of directors recruits all the office and administrative staffs. The
board of directors shall consists of not more than a members of whom 7
members are elected and at least five shall be weavers members and the
remaining two shall be nominated by the district industries officer from his staff.
The secretary shall be responsible for the executive administration of the
society Subject to the control of the president. The secretary shall be the ex-
officio treasurer and shall have the custody of all the properties of the society.
The president has a general control over all the affairs of the society.
No person shall be eligible for the post mentioned below unless he
possesses the qualifications noted against him or her.
1. Secretary or manager : SSLC (Eligible for college course and a course of
training undergone in any of the co-operative industries)
2. Clerk A: Pass in IV form
3. Attenders A: Pass in II form
4. Peons : Literate knowing read and write.
Taliparamba Arts & Science College,Kanhirangad 64
Project Report 2006 Dept. of BBM
At the present 370 employees are working in the society. Which include
office staff, dyeing workers, weavers, winding workers, packing, sales, designing
and stitching workers. Majority of the society employees are womens. There by
ensuring the economic freedom of major household in around the locality.
Number of Employees in KWCS
Working Area No. of Workers
Office 15
Dyeing 16
Weaving 230
Winding 79
Packing 9
Sales 7
Designing 2
Stitching 12
All the employees working in the organization to undertake the specified
duties are competent to undertake the job on the basis of education, training,
skills and experience.
This society provides appropriate training to the employees as per the
requirements. The Chief Executive or Secretary maintains the records of
employees.
The head of the department conduct periodical meeting to create
awareness, relevance and importance of their activities towards the achievement
of quality objectives.
Wage Structure:
For staff : Salary + D A
For workers : Piece rate + D A
Taliparamba Arts & Science College,Kanhirangad 65
Project Report 2006 Dept. of BBM
Benefits to Workers
Apart from the actual wages, the society provides the following benefits to
its workers.
Contributory provident Fund 12%
Bonus 8.33-20%
Casual leave wages 5%
Medical Allowances 5% (Approximate slab system-
Maximum 6%)
Loom maintenance/Allowances 3%
Gratuity 5%
Festival Holidays wages 5% (13 days Avg. wags)
And the society also provides maternity benefits.
Incentive schemes
Apart from the above benefits, the society had implemented its own
welfare fund scheme and Employee State Insurance (ESI) scheme for the
benefits of the workers and employees.
Towards the fund, the society shall collect from workers @ Rs 4/- per
month and society shall be paying Rs 16/- per month per worker. Both these
contributions were deposited in the bank A/c. The interest accrued are also
credited in the same A/c. 10% of the Net profit of the society are also credited to
this A/c. Out of these, the society provide 6% production incentives to
workers.Out of these benefits, the society provides various financial assistance to
its workers. They are as follows.
1) Financial assistance to meet the educational expenses of workers
children.
Taliparamba Arts & Science College,Kanhirangad 66
Project Report 2006 Dept. of BBM
Pre Degree/Diploma - Rs. 500/ Year
Graduation - Rs 750/ Year
Post Graduation - Rs 1000/ Year
Medical/Engineering - Rs 2000/ Year
2) Financial assistance to meet the funeral, when the workers, or their family
members die.
3) Retirement Benefits:
When a worker retire from service, after, completing 20 years of ser vice
and after attaining the age of 55 years, then the workers are entitled to get
a lump sum amount of Rs. 5000/- from the fund.
4) The society also provides medical assistance to its employees.
Bonus
The society gives bonus to its workers and employees in festival time. The
management in a discussion determines the rate of bonus payable with trade
union representatives. In the last year, the society provide 20% bonus to its
employees.
Leaves
Every employee of the society shall be entitled to casual leave not
exceeding 15 days in a year. Every employee of the society shall be entitled to
sick leave on any reasonable ground up to 18 days of every 12 months of his
service.
The secretary shall be authority competent section casual leave to other
employee of the society and the president shall be the authority competent to
sanction of causal leave to the secretary and privilege leave to all the employees
including the secretary. No employee of the society shall canvassing or otherwise
use his influence in any way in the election of office bearers of the institution in
which they are employed.
Taliparamba Arts & Science College,Kanhirangad 67
Project Report 2006 Dept. of BBM
Promotion
Promotion is the upward reassignment in an organizational hierarchy
accompanied by increased responsibility, enhanced status and usually with
increased income.
In Kanhirode Weavers Co-operative Society, the promotion of the
employees is base don seniority.
Time Schedule
Office Time : 9 AM to 5.30 PM
Working Time : 8.30 AM to 6 PM
In this schedule includes one-hour lunch break and half hour tea break.
Trade Union
Trade union is a continuous association of wage earners for the purpose
of maintaining and improving the conditions of their working life. In the company,
employee-employer relationship is very cordial. The trade union influence
industrial democracy, morale and productivity. The workers and staff of the
company formed their own unions to protect their interest.
In this society there are mainly two trade unions. They are;
1. Kerala Co-operative Employees union (KCEU)
2. Handloom Workers Union (HWU)
These two trade unions are affiliated to CITU. Since there is only one trade
union. So there is no scope for interunion revelry.
Taliparamba Arts & Science College,Kanhirangad 68
Project Report 2006 Dept. of BBM
FUNCTIONS OF PERSONNEL DEPARTMENT
The personnel department performs various functions in an organization.
The personnel function is concerned with the procurement, development,
compensation, integration and maintenance of the personnel of an organization
towards the accomplishment of the organizations major goals and policies.
The important functions of personnel department are as follows.
1) Procurement of personnel
This includes manpower planning, recruitment, selection, vocational
guidance, and placement of the right people for various jobs in the organization.
2) Development of personnel.
This is concerned with the increase of workers skill through education and
training, necessary for efficient job performance, it is concerned with forming
sound promotion policy, determination of the basis of promotion and making
performance appraisal also came under the personnel department function.
3) Compensation
Compensation to the employees in the form of wages, salaries, and bonus
assumes great significance, as remuneration is probably the best motivation for
workers to perform the jobs assigned to them. Implementation of incentive and
premium bonus plans and policies.
4) Integration
The personnel department has to reconcile or integrate individual and
organizational objectives through sound industrial relations. The measures for
Taliparamba Arts & Science College,Kanhirangad 69
Project Report 2006 Dept. of BBM
promoting industrial relations include industrial discipline, maintenance of
industrial peace, securing co-operation between trade union and management,
workers participation in management, collective bargaining, grievances and
suggestion systems.
5) Maintenance
Maintenance refers to the keeping of the workforce in a highly satisfied
and motivated condition. It is very essential for the smooth running of the
organization.
6) Records and Researches
The personnel department keeps the detailed record of the employees of
the organization. The information collected and recorded includes information’s
relating to selection, employment, induction, education and training of each
employee. It also covers information regarding labour turnover, absenteeism,
grievances, suggestions, complaints, accidence etc. recording is essential for
every management because it assists the management in decision-making.
Research is also an important function of personnel department. Research
is needed to improve the methods of selection, job analysis, merit rating, training
etc. new motivation technique may also be experimented up on.
Taliparamba Arts & Science College,Kanhirangad 70
Project Report 2006 Dept. of BBM
TRAINING PLAN
Sl. No.
Scope Participants Conducted by
Method Period
1Safety (Fire
Fighting)Selected
employeesExternal agency
Classes with demonstration
-
2On the job
trainingIdentified
employeesIn-house training
Demonstration Continuous
3Induction Training
New recruitsIn-house training
Classes3 moths
from date of joining.
4Safety (First
Aid)Selected
employeesExternal agency
Classes -
5Technical Training
Technical staff
External agency
Practical training
As per the availability of training
6Skill up
gradation programme
Selected operators
Agency notified by Govt. of Kerala
On the job training
AS per the Govt.
sanctions.
7IQA
TrainingSelected
employeesExternal agency
ClassesAs notice by the agency.
Taliparamba Arts & Science College,Kanhirangad 71
Project Report 2006 Dept. of BBM
CHAPTER IX
FINANCE DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 72
Project Report 2006 Dept. of BBM
FINANCE DEPARTMENT
Finance is an integral part of modern economic life and occupies
important plays in all economic activities. Economic growth depends on the
adequate and timely finance. Finance is required to bring a business into
existence, to keep it alive and see it growing.
Finance is the life blood of business. Finance refers to money, cash or
fund available for the operations of the business, without finance a business
cannot function. The management of all business cannot function. The
management of all activities related to finance requires considerable expertise
and specialized knowledge of banks, financial institutions, the different sources of
finance and ways to profitably utilise these funds. Financial management will
there fore, include planning, organizing, directing and controlling financial
activities in an organization.
Financing is a very important factor in every business. Therefore its
management requires special attention. As finance or money is important for any
activity especially in business. One has to procure it from available sources.
Finance collected from various sources and it cannot be kept idle. It has to be
invested in profitable venture.
Now a days the importance of financial management has increased
because of the commitment of the management to various parties interested in
the organization.
Financial management performs various functions. They are financial
planning, procurement of funds, utilization of funds, disposal of surplus, financial
control etc.
The KWCS has well efficient finance department. The secretary of this
society heads this department. They collect fund from various societies. Such as
Taliparamba Arts & Science College,Kanhirangad 73
Project Report 2006 Dept. of BBM
members share, Govt. share etc. They will get 1.20 crores cash credit from
NABARD.
The organization chart of finance department is given below.
They prepared daybook, general ledger, personal ledger, stock register
etc. the final accounts are audited by statutory auditor. They follow concurrent
audit for verifying the accounts. The Govt pays the cost of audit.
Following are the systematic representation of accounting procedure of
KWCS Ltd.
Taliparamba Arts & Science College,Kanhirangad 74
Secretary
Manager
Accountant
Journals
Sub ledger
Main ledger
Trial balance
P & L Account
Balance Sheet
Project Report 2006 Dept. of BBM
Source of Capital
The various sources of capital are as follows.
1. Thrift deposit
2. Fixed deposit
3. Recurring deposit
4. Home safe deposit
5. Insurance deposit
Taliparamba Arts & Science College,Kanhirangad 75
Project Report 2006 Dept. of BBM
FINANCIAL MANAGEMENT IN THE SOCIETY
The financial management performs various functions in the society. The
main and important functions performed by the society are as follows.
1. Financial planning:
The objective of financial management is to make necessary funds
available for investment for the purpose of achieving organizational objectives.
Financial planning is the first step in the direction. Planning is to deciding in
advance. What is to be done in future? Financial planning there fore involves
management divisions regarding the financial plans.
The primary task of financial manager is to formulate financial plans
suitable for the firm’s size and requirements. The financial planning involves long
range plans for plant expansion. Replacement of machinery and equipments and
a lot of other expenditures causing large cash drains.
2. Procurement of funds:
The second responsibility of financial manager is to procure the necessary
funds to satisfy the needs of the organization. It is decided to realize the needed
funds by assuring shares and debentures. The finance manager has to arrange
for the issue of prospectus and take other steps necessary for the purpose.
Where it is proposed to borrow money from financial institutions or banks, the
finance manager will negotiate with the concerned authorities.
3. Utilization of funds:
After procuring the funds the finance manager take steps to allocate funds
among different assets according to their respective needs. The finance manager
should carefully manage the optimum utilization of funds, avoiding wastage etc.
Taliparamba Arts & Science College,Kanhirangad 76
Project Report 2006 Dept. of BBM
He has to ensure that creditors due are maintained and shareholders get a fair
return on the capital untested by them.
4. Disposal of surplus:
Another function of financial management is disposal of surplus arising
from the investment of funds. It is the finance manager job to allocate the earning
after enterprise as between different claims. A part of earning may be rationed for
financing expansion of business. The balance of powerful maybe distributed to
the owners as dividend as a return on their capital.
5. Financial Control:
This is another important function of financial management. The financial
managers are responsible for controlling the uses of funds placed at his disposal.
He will ensure that funds re being utilized effectively in accordance with the pre-
determined plans. Control funds involve development of standard of performance
and comparison of actual performance with standard.
6. Analysis and evaluation of finance function:
It involves financial reporting, financial statement analysis, fund flow
statement, cash flow statement and cash and capital budgeting.
Taliparamba Arts & Science College,Kanhirangad 77
Project Report 2006 Dept. of BBM
THE BALANCE SHEET OF KWCS LTD AS ON 31.03.2006
LIABILITY AMOUNT ASSETS AMOUNT
Share capital 2191535.00 Cash in hand &
bank
1316525.22
Deposits 495529.59 Investments 1861520.40
Reserve fund 3586653.11 Adj. Heads due
to society
22158539.68
Other funds 7586617.23
Govt. Loan 167500.00 Fixed assets 15025433.98
Grant 33451262.11 Looms & other
accessories
12370727.00
Dividend due 439431.74 Closing stock 11559405.80
Borrowing 3403258.17
Grade charges
due
2398178.10
Establishment &
Cont. due (Audit
cost)
40283.25
Reserves 24839491.94
Net profit
2003-2004
1427821.88
2004-2005
507613.581935435.46
Net profit 509976.38
Total 81045152.08 81045152.08
Taliparamba Arts & Science College,Kanhirangad 78
Project Report 2006 Dept. of BBM
CHAPTER X
PURCHASE DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 79
Project Report 2006 Dept. of BBM
PURCHASE DEPARTMENT
Purchasing is one of the important activity in a business organization. In
narrow sense purchasing means merely the act of buying the required items. But
in modern management this term is used in a boarder sense. It includes a
number of activities beyond the simple buying they are;
1. Research and development required for proper selection of material.
2. Methods and procedures required for purchasing.
3. Follow up to insure proper delivery.
4. Co-ordination of activities of related department like receiving, store
keeping, inspecting and accounting.
In modern management purchasing is substituted b the term procurement.
It is a broader term and includes all the activities performed by purchasing
department and additional functions like supervision, inventory management etc.
In large scale organization there will be a separate department ie,
purchasing department headed by purchasing manager. In small scale the
manager or storekeeper may carry organization the duty of purchasing.
Purchased department plays a very important role in an organization
because purchasing has its effect on every vital factor concerning manufacture,
quality, cost, efficiency and prompt delivery of goods to the consumers. Its
function is to procure material, suppliers, services, machines and tools at most
favorable terms constant with maintains the desired standard of quality.
For an organization, purchase is a window to the outside world. The
primary function of purchasing is that of being sensitive to the external supply
market situation and also of feedback this information to the other functions of the
organizations.
Taliparamba Arts & Science College,Kanhirangad 80
Project Report 2006 Dept. of BBM
Purchasing is the most important function of material management. The primary
objectives of purchase department are to purchase right quality material at the
right time at the right place, from right sources with at least cost.
In this society, the secretary,/chief executive has the over all responsibility
for all purchasing activity in this society. They purchase raw materials, and
accessories in accordance with the order of quantity produced.
The purchase department purchase different types of raw material and
accessories for producing products they are;
Raw materials:
Yarn
Dyes
Chemicals
Accessories:
Carton
Celica jel
Labels
Zip runner
Poly bags
Rope
Buttons
Sewing threads
Lace
Elastic
Tape etc.
Taliparamba Arts & Science College,Kanhirangad 81
Project Report 2006 Dept. of BBM
They mainly purchased raw material like yarn, dyes and chemicals from
national handloom development corporation (NHDC) and other private parties. At
that time of purchasing yarn, they will get Govt. subsidy, hank yarn subsidy and
handling charge subsidy.
All the purchases made from approved supplies based on their ability to
supply and past performance. All the purchase are made after assessing the
availability of stock in the society. In case of emergency time they purchase
material from other than approved supplies.
They maintain a minimum of yarn, dyes and chemicals. The head of the
department verify the stock position level periodically. The stock is reached at the
minimum re-order level, they will made new purchase. This society has a very
good quality control department. This department ensures the quality of
purchased materials.
Made OF Payment
The payment is made through cash, DD, or cheque.
The payment is made at the time of delivery to goods or with in the credit
period allowed by the superior.
Taliparamba Arts & Science College,Kanhirangad 82
Project Report 2006 Dept. of BBM
FUNCTIONS OF PURCHASE DEPARTMENT
The functions of purchase department is to decide what to purchase,
when to purchase, where to purchase, how much to purchase, at what price to
purchase and make availability of the product as per the request of the
production department of the organization. The main functions are to take
decision relating to;
1. What to purchase
2. When to purchase
3. Where to purchase
4. How much to purchase
5. What price to purchase
PURCHASING PROCESSES IN KWCS
To perform these functions the purchase department must perform certain
procedures the procedure for purchasing of raw material in the society are as
follows.
1. Receiving of purchase requisition:
A purchase requisition is a request for purchase of a product. The
production department or production supervisor normally gives it. He will give a
request to the purchase department for the goods required for production. The
purchase requisition is generally prepared three copies. The first one is sent to
purchasing department, the second one is sent to the storekeeper or the
department, which initiates the requisition, and the third one is sent to the
authorizing executives.
2. Exploring the sources of supply and selecting the suppliers.
Taliparamba Arts & Science College,Kanhirangad 83
Project Report 2006 Dept. of BBM
A source of supply of materials must be selected after the receipt of the
purchase requisition. The purchase department usually maintains for every group
of materials a list of suppliers name and addresses. After receiving the purchase
requisition, the purchase manager must explore the source of supply and choose
the supplier. He must identity the source of product and where it is available.
Quotation may be invited from these suppliers by issuing tenders to them. On
receipt of quotation from suppliers, a comparative statement of various quotations
received should be prepared and the desirable suppliers should be selected. He
must ensure that the items as per the request of the production departments.
While selecting the suppliers to whom the order is the purchase manager is keep
in mind the following cases.
Manufacturing capability.
Reliability of the suppler.
Financial conditions of the suppliers.
Price quoted.
Quantity of purchase.
Terms of delivery
Terms of payment
Specification to which the products are manufactured.
3. Purchaser Order
After identifying the sources of materials and selection of suppliers, then
he must take the necessary action requires for the purchase of the item. He must
enter a contract for the supply the item. He must ensure the quality of the product
also. He must specify the date and time of delivery of goods.
The purchase order is the written document between the buyer and the
supplier. The supplier is bound to supply materials according to the terms and
conditions of the purchase order and the purchaser is require to accept deliveryof
material and make the payment for material as agreed upon. In the society
Taliparamba Arts & Science College,Kanhirangad 84
Project Report 2006 Dept. of BBM
normally fire copies are prepared and kept by different departments and persons.
They are, the original copy is send to the suppliers, one copy is send to the
receiving department ,one copy is send to finance department, one copy is send
to production department and the last copy is retained by the purchase
department for future reference.
4. Receiving and Inspecting Materials.
After receiving the goods, the purchase manager must make arrangement
for storage and he must ensure the products are as per standards. He must
inspect the items by physical examination or laboratory examination required and
ensure that the items as per the order.
5. Checking and passing of bill for payment
When the invoice is received form the suppliers, it is send to the stores
accounting section to check both the authentically as well as the arithmetical
accuracy. After the physical or laboratory examination of the goods, the purchase
manager must check the bills, he matched with goods specified in the bill and
received goods. The arithmetical accuracy of the invoice is also checked and
verified. After the verification of invoice, the stores accounting section certifies
and passes the invoice for payment. On the basis of invoice. On the basis of
invoice, the cashier can make payment. Payment made according to the terms
and conditions agreed between the parties.
Taliparamba Arts & Science College,Kanhirangad 85
Project Report 2006 Dept. of BBM
CHAPTER XI
QUALITY CONTROL DEPARTMENT
Taliparamba Arts & Science College,Kanhirangad 86
Project Report 2006 Dept. of BBM
QAUALITY CONTROL DEPARTMENT
One of the major achievements of industrial revolution is mass production
of uni9form quality. The industrialist maintained their quality in production and all
other aspects.
The need for quality is felt in our country than anywhere. For too long
consumers have been the victims of poor quality goods. They are subject to
various exploitations such as low quality, low weight, and different quality in same
package etc.
The quality is important due to the following reasons.
1. By using quality raw materials qualified employees, plant & machinery etc
are lead to increase in the productivity.
2. Better quality reduces the cost of repairs and rework. So cost of production
can be reduced.
3. Quality of the products results in sustained profit.
4. Satisfied customers are important assets of a company. Customer loyalty
can be attained only through maintenance of required quality.
5. Goodwill of the company depends on the quality of the products. So good
quality helps to increase goodwill.
Quality control does not begin after the goods are produced. In stead it
begins log before the actual production. The following diagram can show the
quality control.
Taliparamba Arts & Science College,Kanhirangad 87
Project Report 2006 Dept. of BBM
The Kanhirode Weavers Co-operative society is a ISO 9001-2000 certified
company. The scope of ISO 9001-2000 certification covers manufacture and
supply of home textiles. Such as fabrics, made-ups and other textile articles for
direct export and other merchant exporter.
For the purpose of implementing ISO 9001-2000 Quality management
system (QMS) in M/s Kanhirode Weavers Co-operative society has established
and documented a quality management system to continually improve the
effectiveness as per the requirements of this international standard.
This society has a good quality control section or verifying the incoming
goods and final inspection of finished goods. The overall responsibility of the
quality control department is quality assurance officer (QAO). He ensure the
quality of raw materials, work-in-progress and finished goods. A quality controller
is also work-under the Quality Assurance Officer.
For improving quality, they conduct quantity plan and inspection, Test plan
for measuring and at analyzing the quality of the products.
Taliparamba Arts & Science College,Kanhirangad 88
Input Conversion Output
Raw materials components/parts Work-in-progress Goods & Service
Acceptance test
Control Charts
Acceptance Test
Quality of input Quality of WIPQuality of Output
Project Report 2006 Dept. of BBM
THE STRUCTURE OF QUALITY CONTROL DEPARTMENT .
The quality Management System (QMS) in the society are as follows.
Levels
I
II
III
IV
V
QM - Quantity Manual
OP - Operating Procedure.
TAD - Technical and allied Documents
WI - Work Instructions.
Taliparamba Arts & Science College,Kanhirangad 89
Q.A Officer
Quality controller
QM
OP
TAD
WI
FORAMT & RECORDS
Project Report 2006 Dept. of BBM
QUALITY MANAGEMENT SYSTEM PLANNING.
Management representative is over all responsible to ensure that planning
of quality management system is carried out to meet the company’s stated quality
requirements of the products and as well as quality requirements of the products
and as well as quality objectives. The management representative is also
responsible to ensure the dynamism of quality management during the planning
and implementation of the system.
QUALITY OBJECTIVES OF KWCS
The company has formulated the quality objectives keeping in line with the
started quality policy and the quality parameters of the product. The objectives
are measurable in quantitative terms. The company formulated quality objectives
are as follows.
1. To maintain 95% first time acceptance in the dyeing department.
2. To maintain 95% first time acceptance in the made-ups department.
3. To provide in house test facilities to test colour fastness to washing,
rubbing and colour matching cabinet.
4. To achieve 95% on time delivery indirect export on the continuous basis
5. Start commercial production in dyeing by using modern facilities.
The actions plans are reviewed once in six months for ascertaining the
degree of conformance and the management provides the necessary resources
as required for achieving these objectives.
Taliparamba Arts & Science College,Kanhirangad 90
Project Report 2006 Dept. of BBM
INTERNAL AUDIT
The internal audit are planned and conducted at least three times in a
year. It covers all the departments of the company. The audit is intended to find
out,
Adequacy of the quality management system as per the international
standard.
Compliance of the system in the company and,
Effectiveness of the quality management system for continual improvement.
The audits are planner taking into consideration.
The importance of the activity of the stated quality objectives and companies
scope of activity.
The summery of the previous audit, which shows the area of immediate
attention and improvement.
The qualified internal who is independent of the area being audited
conducts audits. The management representative follow up the audit reports and
ensures timely corrective actions on the deficiencies found during the internal
audit.
The follow up audits are conducted to see the effectiveness of the
corrective action taken and also to verify the reports of action taken and also to
verify the report of action taken.
Taliparamba Arts & Science College,Kanhirangad 91
Project Report 2006 Dept. of BBM
QUALITY POLICY
The Kanhirode Weavers Co-operative society is committed to be a quality
driven organization with a philosophy “Together Forge Ahead” in the area of
manufacturing and supplying of home textiles such as fabrics, made ups and
other textile articles for exports and domestic market.
They Aim At
Providing home textile to the requirements of the customers at an economical
price and meeting on time delivery schedules to the satisfaction of the customers.
Promoting term work and respecting human values and ethics providing
resources for continual improvement through technology up gradation and
development of human resources.
Taliparamba Arts & Science College,Kanhirangad 92
Project Report 2006 Dept. of BBM
CHAPTER XII
FINDINGS AND SUGGESTIONS
Taliparamba Arts & Science College,Kanhirangad 93
Project Report 2006 Dept. of BBM
FINDINGS AND SUGGESTIONS
Findings:
1. They mainly concentrate in International markets and less importance to
local markets.
2. They must give more importance to the quality of the product and also try to
reduce the cost of production.
3. Production is done one the basis of customers order.
4. Productions are 100% export quality.
5. This society provides employment opportunity for a lot of people in that
locality.
6. Every worker of the society is a shareholder of this society.
7. There is a proper grievance handling system in the society.
8. During the festival season this society provide special packages for its
customers like discount, rebate etc.
9. Labour problems are very less in this society.
10. Trade unions have freedom to function effectively.
11. The co-operation of workers and management are very high in this society.
Taliparamba Arts & Science College,Kanhirangad 94
Project Report 2006 Dept. of BBM
Suggestions:
1. The society should have more promotional activities like advertisement,
sales promotion, personal selling, etc to increase sales.
2. The society shall utilise its 100% production capacity.
3. Pricing should be flexible according to the demand.
4. The society shall concentrate more on local market.
5. Production speed should be increased and must give importance to quality
factor also.
6. Latest technology should be used in production. It will helps to reduce the
labour cost and to increase production.
7. More training should be provide to its employees.
8. Diversified product can create more sales. Innovations in product design,
size, colour etc should be essential while meeting foreign orders.
9. Develop a good image for product and create brand loyalty among
consumers.
Taliparamba Arts & Science College,Kanhirangad 95
Project Report 2006 Dept. of BBM
CHAPTER XIII
CONCLUSION
Taliparamba Arts & Science College,Kanhirangad 96
Project Report 2006 Dept. of BBM
CONCLUSION
The Kanhirode Weavers Co-operative P & S society Ltd was the first ISO
9001-2000 certified handloom society in Kerala. They produce high quality
products to the local market and international market. This society’s products are
very familiar in national and international market. But the attractiveness of silk
and other synthetic products affected the society. The globalization and
liberalization also affected the society in the selling of its products.
Now they are contributing their share in the international market by selling
their products to units or companies who are exporting in the country.
Globalization and liberalization affects the society and other industries in the
country. Globalization and liberalization affects the society and other industries in
the country. But the society must take it as a challenge and produce quality
products in a most competitive price, as per the international standards. The
society engaged in direct exporting for their products because the handloom
products have heavy demand in foreign countries.
They must know the pulses of the international market, which is very easy
in the era of computerization. Handloom is the most attractive and eco friendly
products used by Indians from the early civilization. Handloom is becoming more
and more important in foreign market.
The society has to face heavy competition from the part of large-scale
private handloom industries. The cost of production is high in Kerala than other
states. This is due to high wages to the workers, low productivity of workers, high
transportation cost, high raw material cost etc. so the society cannot make a
reasonable profit. But the modernization and sophistication will help the society to
reduce cost and to compete in the foreign market. Not only that the society must
know have the pulse of the international market to exit profitable in the handloom
sector.
Taliparamba Arts & Science College,Kanhirangad 97
Project Report 2006 Dept. of BBM
BIBLIOGRAPHY
1. Philip Kotler - Marketing Management - Pearson Education
2. K. Aswathappa & K. Shridhara Bhat - Production and operation
Management - Himalaya Publications House.
3. www.weaveco.com
Taliparamba Arts & Science College,Kanhirangad 98
Project Report 2006 Dept. of BBM
ABBREVIATION
1. KWCS – KANHIRODE WEAVERS CO-OPERATIVE SOCIETY
2. P & S – PURCHASE AND SALES
3. Q A – QUALITY ASSURANCE
4. C E – CHIEF EXECUTIVE
5. LTD – LIMITED
6. CO-OP – CO-OPERATIVE
7. HOD – HEAD OF THE DEPARTMENT
8. WIP – WORK IN PROGRESS
Taliparamba Arts & Science College,Kanhirangad 99