| Date post: | 19-Oct-2014 |
| Category: |
Technology |
| View: | 3,010 times |
| Download: | 0 times |
SAP QUALITY MANAGEMENT:SAP QUALITY MANAGEMENT:
Acceptance Inspection (simplified)Acceptance Inspection (simplified)
Denys Misyuk
Submitted to Prof. Dr. Georg Fischer
Submitted by Denys Misyuk
Fachochscule Hof, 2009
Introduction : Quality and it’s importanceIntroduction : Quality and it’s importance
QUALITY is degree or standard of excellence, especially a high standard.
One can easily distinguish between low quality and high quality products
and make a decision of purchasing or not purchasing a certain product.
For some companies and even countries quality has became a vital
characteristic feature of their products.
Denys Misyuk
characteristic feature of their products.
And for customer it’s the second important factor on which he/she pays
attention , after the price of course.
The proper combination of price and quality is one of the most important
factors of successful product.
Introduction : Quality and it’s importanceIntroduction : Quality and it’s importance
Vs.Vs.
Denys Misyuk
Vs.Vs.
Introduction : Quality and it’s importanceIntroduction : Quality and it’s importance
SAP system helps us to control quality of the goods produced and maintain it
Denys Misyuk
Acceptance Inspection ( simplified )Acceptance Inspection ( simplified )
Aim:
In this process, you enter the inspection results and inspection activities
recorded during inspection lot processing.
You enter the following data:
� Inspection characteristic values
� Defects data
Denys Misyuk
� Defects data
� Valuation of the inspection characteristics and usage decision for the
inspection lot
�Activities (appraisal costs)
Acceptance Inspection ( simplified )Acceptance Inspection ( simplified )
Process Flow
Creating an Inspection Lot
You create an inspection lot, on the basis of which you perform the acceptance
inspection.
Performing the Inspection
You enter the results of the quality inspection for all operations and inspection
characteristics. If inspection characteristics are rejected, the system
automatically creates defect data records in the background. You can also enter
Denys Misyuk
automatically creates defect data records in the background. You can also enter
the time required for the mechanical inspection.
Making the Usage Decision
You enter the defects data and the time required for the visual inspection. You then
make the usage decision.
RESULT:
The inspection results are saved in the system
Acceptance Inspection ( simplified )Acceptance Inspection ( simplified )
Data used during the ProcessData used during the Process
Denys Misyuk
1. 1. Creating an Inspection LotCreating an Inspection Lot
Go to:
Logistics
Quality Management
Quality Inspection
Denys Misyuk
Quality Inspection
Inspection Lot
Processing
Create
Transaction Code QA01
1. 1. Creating an Inspection LotCreating an Inspection Lot
Initial Screen appears. Input the following data:
Material: QS8X20
Plant: 1000 (Werk Hamburg)
Inspection lot origin: 01
Denys Misyuk
Choose
1. 1. Creating an Inspection LotCreating an Inspection LotMake a note of the inspection lot number (our is 3016)
Enter the following data:
Inspection type: 01 (default)
Insp.lot qty : 1000
Vendor : 1235
(K.F.W. London)
Denys Misyuk
Choose
(K.F.W. London)
Purchasing org. : 1000
(Werk Hamburg)
1. 1. Creating an Inspection LotCreating an Inspection Lot
Denys Misyuk
In the background, the system assigns the inspection specifications
(inspection plan with inspection characteristics) and calculates the sample
size for all inspection characteristics according to the quality level.
Choose
2. 2. Performing the InspectionPerforming the Inspection
Go to Initial Screen
Than call up the transaction as follows:
Quality Management
Quality Inspection
Inspection result
For Operation
Denys Misyuk
For Operation
Record
Transaction code : QE01
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
Input the following data:
Inspection lot: your number, default. In our case 3016
Operation: 010 Visual inspection from the drop-menu
Characteristic Filter : All Characteristic
Inspector: your name
Inspect.start time : input inspection start time, default
Choose
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
You now see a list of inspection characteristics for the visual inspection. In the Status
column, you can see the processing status (possible entries help).
To select all characteristics, choose
Click on the characteristic Damage to Packaging
.
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
The detail screen appears. You can see that all 10 packages need to be inspected
Enter the following data: Nonconf. : 1
.
Choose
In the appearing box enter the description.
The system automatically rejected and closed the
characteristic due to the number of nonconforming
units
2. 2. Performing the InspectionPerforming the InspectionDas Bildelement mit der Beziehungs-ID rId4 wurde in der Datei nicht gefunden.
To call up the entry screen for the characteristic Missing quantity, choose (Next char.).
In the dialog box, you see a description of the inspection method
.
Choose Continue.Denys Misyuk
.
To generate a description of the inspection method, choose Insp.method.
2. 2. Performing the InspectionPerforming the Inspection
Das Bildelement mit der Beziehungs-ID rId3 wurde in der Datei nicht gefunden.
In the Results Screen enter the following data
Nonconf.: 1 (1 package contains to few screws)
No. defs : 1 (1 screw less in the package)
Inspected: 2Choose
Denys Misyuk
.
To call up the entry screen for the characteristic ID property class (strength),
choose (Next char.).
2. 2. Performing the InspectionPerforming the Inspection
To view the ID that meets the standard, choose in the Test Eqpmt line.
drawing of the screw head is displayed.
Denys Misyuk
.
Exit this screen.
2. 2. Performing the InspectionPerforming the Inspection
In The Code field of choose the possible entries help,
and in the Catalogue selection choose code 01
Denys Misyuk
.
Choose
To call up the entry screen for Electroplating, choose
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
.
Choose
Input the following data:
Class 3 Dull finish, yellow brown: 9
Class 7 Bright, yellowish brown : 1Choose
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
Click on the Gewünelänge l (Thread Length L) , you can also see the
demanded values of the examined parameter
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
Input the following data:
Inspection lot: your number, default. In our case 3016
Operation: 020 Mechanical Pruefung/Mechanical insp. from the drop-menu
Characteristic Filter : All Characteristic
Inspector: your name
Inspect.start time : input inspection start time, default
Choose
2. 2. Performing the InspectionPerforming the Inspection
Denys Misyuk
The detail screen appears. Five screws need to be inspected individually . You are
provided with the necessary information at the Specs:Fixed Insp. Scope
Input the actual length of the screws examined and Choose
One of the measured values lies outside the tolerance value, so the system rejects the
characteristic and closes the operation
2. 2. Performing the InspectionPerforming the Inspection
To call up the entry screen for the characteristic Brinell hardness, choose
The detail screen
appears. Five screws
need to be inspected
individually .
You are provided with
the necessary
information at the
Specs:Fixed Insp. Scope
Denys Misyuk
Choose
Specs:Fixed Insp. Scope
Input the actual
measured Brinell
hardness of the screws
examined and
The system closes and accepts the characteristic.
You can choose the Histogram. to display the distribution frequency of the classes
Choose
2. 2. Performing the InspectionPerforming the InspectionFill in the Service Entry Sheet:
Denys Misyuk
Enter the working hours used to perform the mechanical inspection and press
The system calculates the appraisal costs and saves the inspection results.
Go to the overview tree.
3. 3. Making the Usage DecisionMaking the Usage DecisionGo to
Logistics
Quality Management
Quality Inspection
Inspection Lot
Usage Decision
Record
Denys Misyuk
Transaction code QA11
3. 3. Making the Usage DecisionMaking the Usage Decision
Initial screen appears. Enter your Inspection Lot , in our case 3016
Denys Misyuk
Choose
3. 3. Making the Usage DecisionMaking the Usage DecisionA list is displayed with the defects data records that the system automatically created
during results recording
Denys MisyukChoose the Characteristics tab page.
3. 3. Making the Usage DecisionMaking the Usage DecisionYou see a list of all the rejected characteristics.
Denys MisyukTo display all of the inspection characteristics, choose (Other charac. list).
3. 3. Making the Usage DecisionMaking the Usage DecisionYou see now list of all inspection characteristics.
Denys Misyuk
3. 3. Making the Usage DecisionMaking the Usage DecisionActivating the problem Notification .
Choose the Defects tab page
Denys MisyukChoose Activate Notification
3. 3. Making the Usage DecisionMaking the Usage DecisionActivating the problem Notification .
The screen activating quality notifications is displayed
Denys Misyuk
3. 3. Making the Usage DecisionMaking the Usage DecisionActivating the problem Notification
Input the following data:
Denys Misyuk
The system activates the quality message
3. 3. Making the Usage DecisionMaking the Usage DecisionActivating the problem Notification
Defective Quantity.
Choose Defective quantity
In the dialogue box choose Defective qty:Proposal
Denys Misyuk
3. 3. Making the Usage DecisionMaking the Usage DecisionUsage Decision
In the UD-Code field enter the code, using possible entries help drop menu:
Denys Misyuk
the UD-Code is A (Accept).
Choose
3. 3. Making the Usage DecisionMaking the Usage DecisionService Entry Sheet
On the menu bar choose Edit � Confirm Activities
Denys Misyuk
3. 3. Making the Usage DecisionMaking the Usage DecisionService Entry Sheet
You can see the service entry sheet where no services are reported for the
operation 010 visual inspection.
Denys Misyuk
You can change it. Place your cursor on the line 0010 Visual inspection
and choose Enter confirmation .
In the Labour field enter 0,1 and choose twice
3. 3. Making the Usage DecisionMaking the Usage DecisionInspection Lot Completion
Choose
In the dialogue box you are requested to explain your decision of acceptance
of the product with the defects detected .
Denys Misyuk
of the product with the defects detected .
THAT IS ALL !!!THAT IS ALL !!!
4. 4. Q&AQ&A
QUESTIONS ?QUESTIONS ?
Denys Misyuk
COMMENTS ?COMMENTS ?
