+ All Categories
Home > Documents > SAT COMMUNICATOR Communicator.pdf · SPECIFICATIONS RF Horn Phased Array Module: Horn Array Radiant...

SAT COMMUNICATOR Communicator.pdf · SPECIFICATIONS RF Horn Phased Array Module: Horn Array Radiant...

Date post: 15-Jul-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
2
SAT COMMUNICATOR ON THE MOVE This latest-generation of SatComm integrates the best of 4 axis tracking systems (two mechanical and two electronic controlled) with the best in high-efficiency phased array technology and superlative RF-beam control. Born to fully satisfy the satcom on the move requirements in the most worse operating theatres, it allows a full duplex broadband satellite connectivity both on civil Ka-band satellites and on military Ka-band satellites from any latitude and longitude of the globe and at any surrounding temperature even in the most adverse weather conditions. This terminal is compatible with any type of Modem and being extremely compact it can be installed in very limited spaces on any type of vehicle, both civil and military. Its speed of auto-positioning in the space and precision of pointing ensure a dynamic of connection with the satellite always impeccable even during high speed movements on the most inaccessible terrains of the typical operational scenarios. The RF Radiation panel has been designed to withstand up to 500W of power and does not need any maintenance or radome around the terminal (as typically all the products of the worldwide competition) so the radiation lobes and efficiency remain optimal to any degree of pointing in space both in azimuth and elevation and this feature distinguishes it from all other satcom on the move equipment. BLOS AND LOS Configurable & Installable * IN COOPERATION WITH 4&4 EIGHT
Transcript
Page 1: SAT COMMUNICATOR Communicator.pdf · SPECIFICATIONS RF Horn Phased Array Module: Horn Array Radiant Surface: 25.8 cm x 12.4 cm ... Azimut range 360° unlimited @60 deg/sec max Roll

S A T

COMMUNICATORO N T H E M O V E

This latest-generation of SatComm integrates the best of 4 axis tracking systems (two mechanical and two electronic controlled) with the best in high-efficiency phased array technology and superlative RF-beam control.Born to fully satisfy the satcom on the move requirements in the most worse operating theatres, it allows a full duplex broadband satellite connectivity both on

civil Ka-band satellites and on military Ka-band satellites from any latitude and longitude of the globe and at any surrounding temperature even in the most adverse weather conditions.This terminal is compatible with any type of Modem and being extremely compact it can be installed in very limited spaces on any type of vehicle,

both civil and military.Its speed of auto-positioning in the space and precision of pointing ensure a dynamic of connection with the satellite always impeccable even during high speed movements on the most inaccessible terrains of the typical operational scenarios.The RF Radiation panel has been designed to withstand up to 500W of power and does not need any maintenance or radome around the terminal (as typically all the products of the worldwide competition) so the radiation lobes and efficiency remain optimal to any degree of pointing in space both in azimuth and elevation and this feature distinguishes it from all other satcom on the move equipment.

BLOSA N DL O S

Configurable& Installable

*

IN COOPERATION WITH 4&4 EIGHT

Page 2: SAT COMMUNICATOR Communicator.pdf · SPECIFICATIONS RF Horn Phased Array Module: Horn Array Radiant Surface: 25.8 cm x 12.4 cm ... Azimut range 360° unlimited @60 deg/sec max Roll

TECHNICALSPECIFICATIONS

RF Horn Phased Array Module:Horn Array Radiant Surface:25.8 cm x 12.4 cm

Operative Frequency Range:RX: 18.3 – 21.2 GHzTX: 28.0 – 31.0 GHz

Maximum Power Input: 500WPolarization:Switchable Dual Circular

Azimuth 3dB beamwidth:3.7°±0.2° (RX) – 2.4°±0.2° (TX)

Elevation 3dB beamwidth6.3°±0.3° (RX) – 4.2°±0.2° (TX)

Beam Squint: AbsentVSWR: < 1.5:1Gain:RX: 30.9 dBTX: 33.2 dB

Sidelobes: < -13 dBCross-Polarization: < -20 dBInput ports: WR42 (RX) – WR28 (TX)

Pedestal & Tracking Specifications:Tracking Accuracy:Pointing error <0.2°Pointing resolution 0.1°

Tracking Range & Performances:Elevation range 180° @60 deg/sec maxAzimut range 360° unlimited @60 deg/sec maxRoll range auto/electronic compensation +\- 15° @100 deg/sec max

Pointing Methods:1) open loop via external gyro and GPS source2) Rf closed loop via internal AGC receiver or

external Beacon receiver source or combined internal and external Beacon source

3) open loop combined with external modem lock4) internal Rf closed loop combined with

external modem lockThis Advanced Tracking Pedestal can track any kind of orbit like Geostationary or Inclined or MEO or LEO Satellites and also any kind of free target into the space like, airborne drones, balloons or helicopters.RF outputs TX and RX via standard L-bandModem and BUC agnostic

Modems Compatibility:Via L standard band modems, totally agnostic Via latest generation modems for HTS satellites like i-direct OpenAmip and OpenBmip protocols available

Temperatures:Operating -40 °C / +50 °C Storage -55 °C / +85 °C

Antenna Weight:14.6 Kg without BUC and Modem

* Blos (Beyond Line of Sight extended Ka band via Satellite) Los (Line of Sight Full Duplex extended Ka band Data Link)

Typical BLOS configuration data transfer up to 2Mb UpLink and up to 8Mb DownLink average using satellites like Telenor Thor7 and Inmarsat GX in civilian band or Yahsat1 and Athena Fidus or WGS generation in military band.Typical LOS configuration data transfer up to 15Mb two way full duplex up to 400Miles in line of sight using 1.5 meter dish aperture with auto tracking on ground segment.


Recommended