AMCi Industry Leaders in Wireless Monitoring Distributed by: Wireless Tracking and Monitoring Technology Application – Electronic Flow Meter Monitoring EFM monitoring and alarming now from AMCi When sales data is more than you need, let us monitor via satellite and deliver the daily operational and production data you want, at a price that will surprise you! Interfaces easily to most EFM’s* Data you need: • Today’s totalized flow • Previous day’s total volume • SD,DP, Temp, etc. • Current average flow rate • More! Alarms: • Lo flow, no flow, SP, etc. • Delivered by phone call from a live operator, text message, email, pager or fax Web page features: • Last known EFM status • History and conditions of prior days • Site location with other mapping functions • Demand poll for current status at any time • Web page for every EFM • Each site is password protected • Uses your browser, no software to buy • Web page time stamps and verifies alarm delivery with acknowledgments * In some cases custom programming and drivers must be written
Transcript
AMCi Industry Leaders in Wireless Monitoring
Distributed by:
Wireless Tracking and Monitoring Technology
Application – Electronic Flow Meter Monitoring
EFM monitoring and alarming now from AMCi When sales data is more than you need, let us
monitor via satellite and deliver the daily operational and production data you want,
at a price that will surprise you!
Interfaces easily to most EFM’s*
Data you need: • Today’s totalized flow • Previous day’s total volume • SD,DP, Temp, etc. • Current average flow rate • More!
Alarms:
• Lo flow, no flow, SP, etc. • Delivered by phone call from a
live operator, text message, email, pager or fax
Web page features: • Last known EFM status • History and conditions of prior days • Site location with other mapping functions • Demand poll for current status at any time • Web page for every EFM • Each site is password protected • Uses your browser, no software to buy • Web page time stamps and verifies alarm
delivery with acknowledgments * In some cases custom programming and drivers must be written
Wireless Tracking and Monitoring Technology
Sentry Solar Module
A solar + battery power source for the
SatAlarm-Sentry™
Features include: Strong magnetic feet – just set in place for a secure and solid install. No aligning or aiming the solar panel – the small solar panel is sized for a horizontal
install.** Pass-through I/O connectors – simply disconnect the I/O cable from the Sentry and plug it
into the Solar Module. When the module is connected to the Sentry with the included cable, all of the functions will remain the same.
Low Cost – less than the cost of two sets of batteries, this unit can last for 10 years or more.
For those customers who have an excessive amount of message traffic or for those who just want to save money and avoid the possibility of missing an alarm or scheduled message because of drained batteries.
This unit may save the cost of 5 – 10 sets of batteries, saving you hundreds of dollars.
Engineered for maximum output – in most locations the rugged 1-watt solar panel will keep the 4 rechargeable Hawker Cyclon™ batteries fully-charged with a minimum 28-day reserve for the Sentry to draw on.
Compact size – this weatherproof unit is only 10”x6”x3.5” and weighs about 10 lbs.
** In some higher latitudes, the customer may choose to mount the solar module at an angle toward the sun.
Field installed unit
Wireless Tracking and Monitoring Technology
SatAlarm Application – Control Panel Data Acquisition
SatAlarm installation with Murphy S400
Compressor Data via Satellite from $39.95 per month!
Murphy TTDJ, S400, Millennium ……
• Simple install, usually takes only minutes • Two-way satellite communication
o No more worries about cellular coverage • Onboard GPS
o Full featured GPS functions including a “Route to” button that draws a map to the site
• Every unit has its own web site that includes the asset data history
• Alarms, data and warnings are sent directly to the server where they can be forwarded to the field and the office via cell phones, pagers and faxes or viewed on the web site. A 24/7 live operator call center is also available.
• Systems can utilize site power or can be self-powered
Example of detail from a single alarm message
Web site features include: • Password protected log in • Multi screen detail level • Daily reports send pre -
defined register values • Ability to poll individual
registers • Ability to view data by date
range • Full GPS features • Map your entire fleet
location including asset status with the click of a button
• On screen reports
Irrigation Applications
Wireless Tracking and Monitoring Technology
• Wells and Pipelines • Canals, streams, and ponds • Pumps • Remote Control gates and
switches • Flood control • No site power needed • Today’s totalized flow • Previous day’s total volume • Current average flow rate • Interfaces to most EFM’s • More!
Web page features: • Last known status • History and conditions of prior days • Site location with other mapping functions • Demand poll for current status at any time • Web page for every site • Each site is password protected • Uses your browser, no software to buy • Web page time stamps and verifies alarm
delivery with acknowledgments
Alarms: •Low flow, no flow •Fluid level, pressure, etc. •Delivered by phone call from a live operator, text message, email, pager, or fax
AMCi’s SatAlarm Internet web site Quick Start Guide http://www.satalarm.com
Minimum System Requirements
Recommended Monitor Screen Resolution: 1024 x 768 (800 x 600 Minimum)
Internet Browser: Microsoft Internet Explorer 5.0 or
higher. (6.0++ is preferred)
Browser settings must be set to “get a fresh copy of the web page” on each visit. Found in Tools > Internet Options >
Temporary Internet Files > Settings
mi
1. IN THE ADDRESS BOX,ENTER THE FOLLOWING URL ADDRESS:
http:// www.satalarm.com
3. CLICK IN THE “VIEW ALL” AREA
Asset Selection Screen
4
5
ABCDEFG
H
I.JK
K
J
I
H
G F
E D
BA
Login Screen 2. ENTER YOUR USERNAME AND PASSWORD
IN THE LOGIN SPACES > CLICK ON LOGIN
If you have not received your Login information or have splaced it, call Customer Service at 303.279.2002 ext 700
. CLICK ANYWHERE ON THE TEXT OF THE DESIRED ASSET.
Asset List Screen
Click anywhere on the text of the desired asset.
. CLICK ON ITEM DESIRED FOR MORE DETAIL
. Last known status of the inputs.
. Thumbnail map – Typical mapping features
. Hardware / terminal characteristics
. Poll button
. Activity frame begin and end dates.
. Activity Frame. . Asset detail “Refresh” – updates information on
this screen to show new messages, if any. . IE Page refresh – will take you all the way back
to Asset Selection Screen.
C Log out of SatAlarm. . Asset search field. . IE Back button.
See next page for detail instructions
E. Use the SatAlarm page “Refresh” button after resetting time and date (see item G.)
Set the time and date for the period that you wished displayed in the Activity Frame.
Quick Start Guide - Details
D. Using the drop downbox, choose from the listof items that you wish toknow the current status.Results usually returnwithin the time set for thewake up period.
F. This area displays the asset history period defined in the date and time boxes. Data in this area includes: events, scheduled reports, polls, responses & short messages.
C. Displays the current terminal characteristics and terminal data. The terminal characteristics (the waythe terminal b
ehaves) can e reset over the air, in
mos
Contact your distributor or AMCi to perform this action.
bt cases.
B. Click on the Thumbnail Map to access the mapping features of SatAlarm. You can zoom in and out, drag a square to increase detail andeven route from an address using t e route button locatehat the bo
d ttom of the activity
frame.
A.
G. Satalarm Page “Refresh” button refreshes only the asset detail page.
H. Internet Explorer” Refreshbutton takes you back to the Asse
”
t Selection Page.
I. Click here tolog off of your session. This returns you
to the login page.
J. Use this sectioto search for a specific asset byname or b
n
y it’s
number.
K. Use this buttonto go back one screen. Use this to return to Asset List Screen.
Gloss
Displays the last know status from the Sentry. The number ofunctions shown here can be increased based on the
f
application i.e. MPH, Heading, other digitals and analogs
ary of Terms
Secure Login – Allows only the people with the correct Username
)
schedule. (Terminal Characteristics define the time interval)
and Password to view your companies data. Poll the Unit – An action to request that data be sent immediately
from the field to the web site. (Button on the Asset Detail Screen Scheduled Report – A report generated by the Sentry on a pre-determined
Event Report - This is a report that is sent to the web site me a pre determined event occu
every rs in the field. (Terminal
the
tiCharacteristics define behavior) Notification – Associated with Event Reports, this is posted onActivity Frame every time notification of an event occurs. (i.e.
dged - Conformation that the Notification has been delivered.
alarm sent to call center) Acknowle
Important Phone Numbers- Customer Suppo ext 700, 304,605 (After Hours) 970.739.247024/7 Call Center 1.888.385.6837
rt (Business Hours) 303.279.2002
The SID is a microcontroller device designed
specifically to work with the SatAlarm products. It
can communicate with intelligent devices over a serial
interface using protocols such as MODBUS. It can
directly connect to multiple end devices such as
pressure and temperature transmitters. It has 8 12-bit
analog inputs, 8 digital input/outputs, a high current
relay for control applications and an RS-485 serial
port for protocol communications. The SID can be
powered solely from the batteries in a Sentry allowing
it to be used at unpowered sites. It can also be
powered from a local DC power source.
Several standard applications are already written to
run on the SID such as communicating with a Murphy
TTDJ Digital Annunciator to bring back first fault
SatAlarm product interface: • Murphy Control Panels • Altronic Control Panels • Allen Bradley PLC’s • Siemens PLC’s • Totalflow meters & PLC’s • Bristol flow meters • Fisher flow meters and PLC’s • Most other flow meters • CCT’s ProFlo • KimRay flow meters
andPLC’s • Lufkin controllers • Daniels flow meters • Sunwize power modules • Otis gas monitoring systems Applications: • Gas compressor data and
alarms • Flow meter data and alarms • PLC interface and alarms • Electric meter data • Simultaneously read 3 pulses • Interface to ultrasonic sensors • Wastewater applications • Home security applications • Site pressures and
temperatures • H2S and other hazardous gas
metering and alarming • Pipeline leak detection and
monitoring
Wireless Tracking and Monitoring Technology
SatAlarm-Satellite Monitoring Unit (SMU)
AMCi’s lower-cost Satellite Monitoring Unit
(SMU) makes asset monitoring more
productive.Each unit is custom built to the customer’s specifications based on their monitoring requirements, asset configuration, and the power source to be used.
The SMU can be self- or site-powered. It can be autonomous by using either primary lithium batteries only or a solar panel with rechargeable batteries, or both. It can also be site powered from 12 or 24 VDC or 110 VAC. Lithium batteries can be added for back-up in the event of site power failure.
Basic features Include: • 4 digital ports that can be configured to inputs or outputs • 1 8-bit analog input • RS232 serial port • Built in GPS – asset location, speed and heading for mobile
applications. • Two-way communication – Poll the unit for current site conditions
or reprogram the unit to change frequency of reports and their content, change the behavior or set or change alarm parameters.
Advanced features: (with the addition of an AMCi SID) • RS485 serial port • Custom serial protocol applications (i.e. MODBUS, etc.) • Up to 5 analog inputs • Up to 10 digital inputs
SMU™ Applications: • Tank Monitoring – Levels and
alarms • Compressor Monitoring – Alarms
and operational data • Wellhead Monitoring – Shut-in
alarms and pressures • Gas Flow Monitoring – Alarms and
operational data • Generator Monitoring – Location,
operational status, voltage, etc. • Compatible with head switches
and pressure sensors • Irrigation applications • Intrusion and vehicle detection • Remotely monitor and operate
valves and pumps • Monitor several pieces of
equipment at a single site. • Combine digital and analog inputs Additional Capabilities When used with AMCi’s SatAlarm Interface Device (SID) users can: • Communicate with intelligent field
devices and controllers that use serial protocols such as MODBUS
• Monitor and control additional analog and digital ports, including pulse output devices
SatAlarm-Server Web Application SatAlarm-Server is Internet-based and is for users and administrators to see and interact with their Sentry units. • No special software required • Password protected website • Generate & print reports • Export data files • Full mapping features • Last known status • Poll for data and location • Route to mapping features • Unlimited electronic alarm
notifications • Works with AMCi’s 24/7 live-
operator call center • More!
Pole mount unit shown with AMCi’s Solar Module.
Tank Level
Float Switch
Tank Monitoring
Web Interface - Backend
Anderson Controls2050 S. Oneida Street
Denver, CO 80224 Phone 800.699.0290 www.andersoncontrol.com
Kevin Anderson
ACI Logo
Wireless Tracking and Monitoring Technology
SatAlarm Application – Vehicle Detection
Detect the presence of a moving vehicle and even its direction with AMCi’s new vehicle detection system. Report to your own web site whenever a vehicle enters your area of surveillance.
• No site power required! • Installs in minutes. • Two way satellite communication
without any other antennas. • Batteries last for years with normal
use. • Sensor creates an electro-
magnetic field. • Detects moving vehicles, motorcycles
and even bicycles. • Records history of intruders on your
protected web site. • Receive daily reports and/or set for
alarm notification whenever vehicles are present.
• Satellite to the Internet within a minute.
Pipeline Security
Facility Security
Home Security
Well Head Security
Border Crossings
Lease Site Security
Protect your assets while you protect the environment!
Features: • Totally self contained • Two way satellite
communication • No solar or site power
required • Sends data to you
password protected web site
• No external antennas • Sensor can be buried in
the traffic area or simply placed along side
• No additional software to buy
• Uses your existing Internet connection and browser
• Receive daily reports • Receive alarms whenever
vehicles are present • Alarms are in the form of
email, text messages to your cell phone, faxes or a live call from our 24/7 call center
• Every web site includes a full featured map and site location
![Satellite Communication [ IT PRESENTATION-2012 ]](https://static.documents.pub/doc/80x56/577d1df21a28ab4e1e8d58f8/satellite-communication-it-presentation-2012-.jpg)
