SAUDI ELECTRICITY COMPANY Engineering and Generation...

SAUDI ELECTRICITY COMPANY

Engineering and Generation Projects Sector

Approved Vendor List

12 May, 2012 Page 1 of 181

1.This document (Approved Vendor list) has been developed by Generation Project Engineering Sector- Engineering Department.

2.All procurements shall be made by Contractors/Subcontractors according to the approved list.

3.The Contactor shall ensure that all his selected vendors should have valid ISO 9001 QC Certificate for particular facility and equipment while commencing procurement.

4.The procurement outside the approved list shall not be allowed. However, in special cases such as for example (Approved manufacturer decline to quote, requested product not listed in the AVL … ) the EPC Contractor shall send Product PQ request to the concerned Execution Dept, describing the circumstances and enlisting the reasons for not utilizing the SEC approved vendor list. The concerned Execution Dept. shall thoroughly scrutinize the validity of the contactor request. In case of valid reasons and considering impact on the progress, fill the PQ request (form 7.12) and send it to Generation Technical Qualification Division [email protected]

5.Approval / disapproval by COMPANY of prequalification vendor / manufacturers documents shall not relieve the CONTRACTOR from his obligations under the Contract.

6.The manufacturer listings shall be interpreted in the following manner:

6.1Manufacturer listed with the word "None" as a "Limitation". All products from the manufacturer in the given category are acceptable.

6.2Manufacturer listed with a "Limitation": Only the product that meets the "Limitation" is acceptable. If noted as being manufactured "Under License”, only products made under the terms of the license agreement are acceptable.

6.3Manufacturer is listed with a specific "Location”: Only products made in the specific location or area(s) are acceptable.

General Instructions

12 May, 2012 Page 2 of 181

Qualified For 0.6/1 KV Power & Control Cable

Rec No Contractor Name Location Limitations

9963 TEKAB Co. Ltd UAE Cables with copper conductor with armor per Clause 4.3.5 b, c & d (only) of 11-TMSS-10-R1 specification.-TEKAB Co. Ltd. shall conduct type tests for first projects / order for each type at approved laboratory by SEC. -TEKAB Co. Ltd. shall submit type tests certificates for appraisal and approval by SEC. -(10) Years Extended guarantee / warranty certificate.

Qualified For 110 – 132KV, 230KV & 380KV CTS


6513 ABB SWEDEN

6595 ABB ( T& D) USA

6624 AREVA United Kingdom

6693 VA TECH Italy

6845 ALSTOM (T & D) BALTEAU SA (NV) Belgium

7367 HAEFELY-TRENCH ELECTRIC SWITZERLAND

7381 NISSIN Japan

7387 RITZ USA

7395 KUHLMAN ELECTRIC CORPORATION USA

7398 KWK MESWANDLER Germany

7401 PFIFFNER SWITZERLAND

7404 SADTEM France

7407 STE Italy

Qualified For 110 – 132KV, 230KV, 380KV POTENTIAL TRANSFORMERS


6511 ABB SWEDEN





8631 HAEFELY-TRENCH ELECTRIC France

7379 NISSIN Japan

7385 RITZ USA

12 May, 2012 Page 3 of 181

Qualified For 110 KV TO 132 KV PRIMARY: POWER TRANSFORMERS UP TO 250 MVA


8610 SIEMENS Germany

Qualified For 110 KV TO 132 KV REACTORS


6486 ABB SWEDEN

6606 AREVA France

6640 JAPAN AE POWER SYSTEMS CORP. Japan

6684 TMT&D CORP. Japan

6792 ELIN VA TECH Austria

6816 TRAFO-UNION (SIEMENS) Germany

Qualified For 110KV HV CABLES


6489 ABB Germany

6980 RIYADH CABLE Saudi

6982 SAUDI CABLE Saudi

6984 FUJIKARA Japan

Qualified For 13.8 KV, 33KV & 34.5 KV PRIMARY: DIST. TRANSFORMERS UP TO 1 MVA


8623 ABB Saudi

8624 SAUDI TRANSFORMERS CO. Saudi

8625 WESCOSA Saudi UP TO 13.8 kV ONLY

Qualified For 230 KV AIR CORE REACTORS



Qualified For 230 KV OIL IMMERSED REACTORS


6487 ABB SWEDEN


6607 AREVA France




Qualified For 230 KV PRIMARY: POWER TRANSFORMERS UP TO 400 MVA


12 May, 2012 Page 4 of 181


Qualified For 33 & 34.5 KV CTS



6669 SIEMENS USA

7373 GE USA

7389 ABB EJF Czech Republic




7402 SADTEM France

7405 STE Italy

Qualified For 33 & 34.5 KV POTENTIAL TRANSFORMERS








7372 GE USA

7377 NISSIN Japan

7388 ABB EJF Czech Republic

7390 E. PFIFFNER SWITZERLAND

Qualified For 33 KV TO 69 KV OIL IMMERSED REACTORS


6485 ABB SWEDEN

6605 AREVA France





5064 SIEMENS na

12 May, 2012 Page 5 of 181

Qualified For 33KV & 34.5 KV PRIMARY: POWER TRANSFORMERS UP TO 50 MVA


8580 AREVA Germany None

Qualified For 380 KV OIL IMMERSED REACTORS


6488 ABB SWEDEN

6608 AREVA France





Qualified For 380 kV PRIMARY: POWER TRANSFORMERS UP TO 510 MVA



Qualified For 400KV HV CABLES


6490 ABB Germany

6985 FUJIKARA Japan

Qualified For 69 KV POTENTIAL TRANSFORMERS


6510 ABB SWEDEN






7378 NISSIN Japan

7384 RITZ USA


Qualified For 69 KV PRIMARY: POWER TRANSFORMERS UP TO 67 MVA



Qualified For 69KV CTS


6512 ABB SWEDEN

12 May, 2012 Page 6 of 181



6670 SIEMENS USA

6692 VA TECH Italy



7374 GE USA

7380 NISSIN Japan

7386 RITZ USA





7403 SADTEM France

7406 STE Italy

Qualified For AC & DC DIST. PANELS


8838 EAST & WEST FACTORY Saudi

9022 EAST & WEST FACTORY Saudi

9029 SIEMENS Saudi

9028 REMAL Saudi

9027 MUSAID SWITCHGEAR Saudi

9026 MOHAMMAD AL –OJAIMI FACTORY Saudi

9024 EPS LTD. Saudi

9023 ELECTRICAL PANEL BOARD FACTORY/HAWA TRADING

Saudi

9020 ABB/AEIL Saudi

8845 SIEMENS Saudi

8844 REMAL Saudi

8843 MUSAID SWITCHGEAR Saudi

8840 EPS LTD. Saudi

8841 ETA-PCS UAE For :1600A/380V(indoor) :Extended warranty for 10 years.

8837 AL-FANAR ELECTRICAL SYSTEM Saudi UP TO 5000A AC & 250A DC

8836 ABB/AEIL Saudi

12 May, 2012 Page 7 of 181

8842 MOHAMMAD AL –OJAIMI FACTORY Saudi

8839 ELECTRICAL PANEL BOARD FACTORY/HAWA TRADING

Saudi

643 WESCOSA ONLY TYPES SAS 600/2000/5000 AND MUST BE EQUIPPED WITH HINGED REAR DOORS FACTORY: DAMMAM

Qualified For ACOUSTIC INSULATION FOR STEAM TURBINE


6449 INSULTEC USA

6452 INECO USA

6454 OKI Germany

6456 WENDT Germany

6457 REINHOLD & MAHIA (WILLICH) Germany

Qualified For ADJUSTABLE FREQUENCY DRIVE SYSTEM: 1 KV AND ABOVE


6540 SIEMENS AG Germany

6550 GENERAL ELECTRIC USA

6568 SIEMENS ENERGY AND AUTOMATION USA

6726 ABB INDUSTRIE AG TURGI, SWITZERLAND

6727 HILL GRAHAM CONTROLS United Kingdom

6728 ROBICON USA

Qualified For ADJUSTABLE FREQUENCY DRIVE SYSTEM: LESS THAN 1 KV


6549 GENERAL ELECTRIC SALEM, VA

6563 ALLEN-BRADLEY USA

6565 CUTLER-HAMMER USA


6720 ABB INDUSTRY OY HELSINKI, FINLAND

6721 CONTROL TECHNIQUES / EMERSON United Kingdom

6722 TELEMECANIQUE OR SQUARE D/TELEMECANIQUE

RUE ANDRE BLANCHET, FRANCE

6723 TOSHIBA USA


Qualified For Aeration Element


12 May, 2012 Page 8 of 181

9463 Convitec/Supratec Germany

Qualified For AIR COMPRESSORS


5025 GARDNER DENVER na

5219 ATLAS COPCO – PREFERRED Antwerp, Belgium

5220 INGERSOLL RAND USA

5222 SULLAIR na

5224 COOPER/JOY INDUSTRIES USA

5225 DRESSER RAND Singapore

5227 AERZEN NSA CORP. na

5228 SUNDYNE COMPRESSORS USA

5229 KAWASAKI HEAVY IND. LTD. Japan

5230 AC COMPRESSOR USA

5232 UNIVERSAL COMPRESSION USA

Qualified For AIR DRYERS


5221 INGERSOLL RAND USA

5223 SULLAIR na

5234 KEMP na

5235 ATLAS COPCO - PREFERRED Antwerp, Belgium

5236 PNEUMATIC PRODUCTIONS CORPORATION

na

5237 GDI na

5238 DELTECH na

Qualified For ALUMINUM DOORS & WINDOWS


8219 National Aluminium Factory Co. Saudi

8220 Khalid Al-Howaish Est. Saudi

8068 NATIONAL ALUMINUM FACTORY CO. Saudi

8069 KHALID AL-HOWAISH EST. Saudi

Qualified For AMMETER, VOLTMETER, MW, MVAR


6630 AREVA France

7453 CELSA Italy

12 May, 2012 Page 9 of 181

7454 CEWE Spain

Qualified For ANALYZER SHELTERS


9763 Isa Mannai Technical Services Est Saudi

7873 SIEMENS APPLIED AUTOMATION USA

7924 ABB AUTOMATION E.C. Manama, BH

7925 ABB PASTECH USA

7926 EMERSON PROCESS MANAGEMENT GMBH

Wessling, DE

7927 COMPUTER SYSTEM PROTECTION (AL-MANNAI)

Saudi

Qualified For ANALYZER; CHROMATOGRAPH; PROCESS GAS OR LIQUID


7658 ABB AUTOMATION USA


7874 YOKOGAWA ELECTRIC CORP Japan

7881 HAMILTON SUNDSTARND USA

Qualified For ANNUNCIATOR PANEL



6701 WESCOSA Saudi

6711 EPS LTD. Saudi

7011 LS Korea

7046 J-POWER SYSTEM CORP. Japan

7099 NEXANS SWITZERLAND

7111 PIRELLI KABEL AND SYSTEM GMBH Germany

7146 FUJIKURA VISCAS CORP Japan

7151 STEINER Japan

7412 MOHD. AL-OJAIMI LTD. Riyadh

7416 ABB SUBSTATION AUTOMATION OY FINLAND

7417 AMETEK POWER INSTRUMENTS USA

7418 PAN ALARM USA

7419 RONAN ENGINEERING United Kingdom

7421 RTK ENGINEERING LTD. United Kingdom

12 May, 2012 Page 10 of 181

Qualified For ANNUNCIATOR PANEL: SOLID STATE AND PLUG-IN MODULE


7993 RONAN ENGINEERING CO. USA

7994 RONAN ENGINEERING LIMITED United Kingdom

7995 RTK ENGINEERING LTD United Kingdom

7996 AMETEK-ROCHESTAMETEK-ROCHESTER INSTRUMENT SYSTEMS LTDER INSTRUMENT

United Kingdom

7998 PANALARM DIVISION USA

Qualified For Annunciator Panels


10130 AL-FANAR ELECTRICAL SYSTEM Saudi 1-Annunciator System shall be always procured from SEC technically approved manufacturers.2-Extended ten (10) years Guarantee \Warranty shall be applicable for all supplies directory or though contractors.

Qualified For Ash Handling System


9406 Lodge Cottrell Limited United Kingdom

9314 NOL-TEC USA

Qualified For ASPHALT WORKS


8077 ABDUL-SAMED H. HALAWANI EST. Saudi

8078 AL-GHARMOOL EST. Saudi

8079 SAMACO Saudi

Qualified For AUXILIARY BOILER


5151 BABCOCK & WILCOX USA

5152 NEBRASKA na

Qualified For Axil Fans


10097 Zamil Hudson Saudi Fans and its auxiliaries shall be from SEC approved vendors list

Qualified For Bar earthing Copper Conductor "Stranded high conductivity copper"


12 May, 2012 Page 11 of 181

9996 AL-FANAR ELECTRICAL SYSTEM Saudi 1-Subject to technical acceptance & conforming to prevating specifications and test requirements2-Extended ren (10) rears Guarantee/ Warranty shallbe applicable for all supplies directory.

Qualified For Bar Screen Grab


9758 Hyorim Industries Inc. Korea Model : Rake Trash RakeChannel Width 1 - 6 meter ,Bar Pitch 40 - 150 mm Traversing speed 9 m/min Design Hoisting Capacity 2000 kg Debris Hopper Capacity 2m³

Qualified For Bar Screen Gripper


9759 Hyorim Industries Inc. Korea Model: Rake and MonorailChannel Width 1 - 6 m , Bar Pitch 40 - 150 mmGrab Width 1.2 - 2.5 m Design Hoisting Capacity 500 - 3000 kg

Qualified For BARE CONDUCTOR, ACAR / ACSR / AAAC / AW


6937 RIYADH CABLES Saudi


7223 ALCOA USA

7299 MIDAL CABLE LTD. Bahrain

7301 SOUTHWIRE USA

Qualified For BATTERY CHARGER


8710 JESUS MARIA AGUIRRE (JEMA) Spain

6847 CYBEREX USA

6857 C & D USA

6861 EXIDE TECHNOLOGIES USA

6881 SAFT POWER SYSTEMS SAS France

6887 CHLORIDE France

6894 SAFT AB Oskarhamn, Sweden

6897 COM 10 INTERNATIONAL PTY. LTD. Australia

6899 AEES France

6901 BENNING Germany

12 May, 2012 Page 12 of 181

6903 EMISA (ELECTRO MERCANTIL INDUSTRIAL S.A. SPAIN)

Spain

6905 ERSKINE United Kingdom

6906 GUTOR ELECTRONICS LTD. SWITZERLAND

6907 CONSTANT POWER MANUFACTURING CO.

USA

6908 SOLID- STATE CONTROLS INC. USA

6909 THEO-BENNING Germany

Qualified For Battery Charger/Rectifier


8968 BORRI S.P.A Italy -Battery Charger / Rectifier Model RTB.e-Extend warranty shall be applicable to all supplies dirctly or thrugh supplier.-Ten (10) years warranty shall be applicable for first project and reduced yearly for subsequent project awards.

8961 CEG Elettronica Industriale S.p.a Italy 1-Battery Charger/Rectifier Model UBC Series.2. All parts & components shall be procured from CEG group-Italy manufactured. 3. Ten years extended warranty shall be applicable to:- All supplies directly or through supplier.- Design defects & manufactur

9329 HBL Power Systems Ltd, India Battery Charger/Rectifier

Qualified For BATTERY CHARGER: BATTERY CHARGER, 48 VDC


6862 EXIDE TECHNOLOGIES USA



6898 COM 10 INTERNATIONAL PTY. LTD. Australia

6900 AEES France

6902 BENNING France

6904 EMISA (ELECTRO MERCANTIL INDUSTRIAL S.A. SPAIN)

Spain

6910 BRAGA MORO Italy

6911 HAMMER & SIMMONS United Kingdom

6912 T.D.I USA

12 May, 2012 Page 13 of 181

Qualified For BATTERY LEAD ACID


9328 HBL Power Systems Ltd, India Lead Acid batteries

6854 BAE BERLINER BATTERIE FABRIK- G Germany

6855 C & D USA

6858 CEAC France

6859 EXIDE TECHNOLOGIES USA/SPAIN

6863 FIAMM Italy

6865 GOULD (GNB) USA/CANADA

6866 HAWKER LTD. United Kingdom

6868 HOPPECKE Germany

6870 TOVARNA AKUMULATORSKIH BATERIJ

SLOVENIA

6871 TUNGSTONE (HAWKER TUNGSTONE) United Kingdom

6872 VARTA HAWKER Germany

6874 YUASA Japan

6875 ENERSYS, INC.(FORMERLY YUASA) USA

6876 ENERSYS, INC. (FORMERLY YUASA) USA

Qualified For BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)


6856 C & D USA

6864 FIAMM Italy

6867 HAWKER LTD. United Kingdom

6869 HOPPECKE Germany


6877 CHLORIDE (HAWKER CHLORIDE) United Kingdom

6878 EXIDE TECHNOLOGIES (FORMERLY GNB)

USA

6879 SAB Germany


6883 SEC USA

6884 YUASA EXIDE USA

Qualified For BATTERY NICKEL CADMIUM (NICD)


8910 Gulf Batteries Company Ltd. Saudi Nickel Cadmium Batteries Only

12 May, 2012 Page 14 of 181

9309 HBL Power Systems Ltd, India Nickel Cadmium Batteries

6860 EXIDE TECHNOLOGIES USA/SPAIN

6885 ALCAD SWEDEN


6889 EMISA Spain

6890 FRIWO Germany

6891 GNB USA/CANADA

6892 SAFT-NIFE SWEDEN

6893 SAFT AB OSKARHAMN, SWEDEN



Qualified For BLACK START GENERATOR SETS


8072 CUMMINS

8071 CATERPILLAR USA

6526 MHI Japan

Qualified For BLASTING AND COATING SHEET PILES


8239 Global Suhaimi Co. Saudi

8085 GLOBAL SUHAIMI COM. Saudi

Qualified For BLOW DOWN TANK FOR BOILER


8338 GULF STEEL WORKS Saudi

4857 AL-ZAMIL HEAVY INDUSTRIES Saudi

5132 ARABIAN INTERNATIONAL CO. Saudi

5133 ARABIAN TANK & VESSEL Saudi

Qualified For Blow Down Tank for Boiler Main & Secondary Seawater Cooling Water Pipe (Except S



Qualified For BOILER MANUFACTURERS


166 Ansaldo Caldaie S.p.A Italy

8686 IHI Japan

6547 MITSUBISHI HEAVY INDUSTRIES, LTD. (MHI)

Japan

12 May, 2012 Page 15 of 181

6555 BABCOCK & WILCOX USA

6556 Foster Wheeler Global Power Group (FWGPG)

Spain

6557 DOOSAN HEAVY INDUSTRIES AND CONSTRUCTION CO. LTD.

Korea

5069 ALSTOM Germany

5105 Babcock-HITACHI K.K. Japan

Qualified For BOILER CASING



4894 ARABIAN INTERNATIONAL CORPORATION

Saudi

4897 HIDADA LTD. Saudi

Qualified For BOILER CIRCULATING WATER PUMPS


5123 KSB Germany

5168 HAYWARD TYLER UK United Kingdom

Qualified For BOILER DRUM


8679 Kangrim Heavy Industries Co. Ltd. Korea Manufacturing in Korea

8678 ULP Co. Ltd. Korea 1-Manufacturing in Korea.2- ULP Co Ltd Issue Inspection and Test Plan Detailing all of the Manufacturing and Test Activities and Approval by SEC Prior to the Start of Manufacture.

6445 B & W Canada

Qualified For BOILER FABRICATION SHOPS


9271 WUHAN BOILER COMPANY, ALSTOM China All engineering and design activities to be done at ALSTOM Windsor, USA (Formerly Combustion Engineering)

12 May, 2012 Page 16 of 181

9855 Babcock-Hitachi Inc Philippine -As a fabrication shop only for BOILER PRESSURE PARTS- All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS


China - As fabrication shop only for the following components: (Headers, Superheaters, Reheaters, Economizer and Vertical Walls)- All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS- All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

9887 Yantai Hyundai Heavy Industries Co.Ltd China -As fabrication shop only for the following components:(Headers,Superheaters,Reheaters,Economizer and Vertical Walls)-All Engineering and Design work must be reviewed and approved by SEC's accepted OEM-Componets to be fabricated following ASME procedures and shall bear ASME stamp.-All sourced materials shall be as per ASME,ASTM,DIN,BS or JIS-All materials above grade 22 shall be sourced only from West Europe USA or Japan.

12 May, 2012 Page 17 of 181


Vietnam - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

9842 Babcock & Wilcox China - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

4838 ALSTOM POWER SRO Czech Republic -As a fabrication shop only for BOILER PRESSURE PARTS- All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

Qualified For BOILER FANS (ID, FD & GR)


6469 TLT BABCOCK USA

6470 HOWDEN POWER Denmark

6472 FLAKTWOODS AB / ABB SWEDEN

6524 FLAKT SOLYVENT France

6525 BOLDROCCHI Italy

6527 MHI Japan

5103 HITACHI Japan

12 May, 2012 Page 18 of 181

Qualified For Boiler Feed Booster Pump


9392 Hyundai Heavy Industries co., LTD. Korea Model HD, max flow 700 m3/h total head 45 m

Qualified For BOILER FEED PUMPS AND MOTORS for Combined Cycle Power Plant


8406 Hyundai Heavy Industries co., LTD. Korea Model HMR, max flow 700 m3/hr Total head ~ 1800 meters.

9529 Hyosung GoodSprings, Inc.(HGS) Korea

9768 TERMOMECCANICA Italy Models (MES,MESB,D2D or PF )

8439 Flowserve- Coslada Spain Modeles (WXH,CSB,CHTA/DSB,DMX)

5049 MITSUBISHI Japan

5083 KSB, INC Germany

5084 SULZER PUMPS Germany

5088 FLOWSERVE France, United Kingdom & Austria

5095 EBARA Japan

5100 HITACHI Japan

Qualified For BOILER FEED PUMPS AND MOTORS for Steam Power Plant


9993 TERMOMECCANICA Italy Models (MES,MESB,D2D or PF )


9988 EBARA Japan

9985 SULZER PUMPS Germany

9991 Flowserve- Coslada Spain Modeles (WXH,CSB,CHTA/DSB,DMX)


9989 HITACHI Japan

9984 KSB, INC Germany

Qualified For BOILER FEED/FEED/STOP/MAIN STEAM STOP VALVES


10010 Key Valve Technologies (KVT ) Korea Size: up to and including 40" Rating: up to and including 4500 Ibs /PN640/10.000psi

5106 EDWARDS USA

5108 DRESSER (FLOWSERVE) USA

Qualified For BOILER MISC. TRIM VALVES


12 May, 2012 Page 19 of 181


5107 EDWARDS USA

5110 DOUGLAS CHERO SPA Italy

5111 HP Valves Oldenzaal BV Netherlands

5112 VELAN Canada

Qualified For BOILER- REGENERATIVE AIR HEATERS


6471 HOWDEN POWER Denmark

6528 MHI Japan

6531 ALSTOM AIR PREHEADER USA

6532 ALSTOM APER GMBH Germany

5071 ALSTOM France

Qualified For BOILER SAFETY VALVES


5109 DRESSER (FLOWSERVE) USA/Italy

5113 CROSBY USA

Qualified For BOILER STRUCTURAL STEEL


8433 Energya Steel Solutions Saudi



4902 AL ZAMIL HEAVY INDUSTRIES Saudi

4903 AIC Saudi

Qualified For BRIDGE CRANES / HOISTS / MONORAILS


9281 Ace Crane Systems LLC UAE -Up to 100 Ton-For non-hazard area-All equipments shall be from Abus (Germany).

6292 ITALKRANE Italy

6293 SAUDI CRANE Saudi

6294 Kone Saudi


6297 EIC Saudi

6298 ABUS Germany

12 May, 2012 Page 20 of 181

Qualified For BS&W ANALYZERS


7714 THERMO MEASUREMENT LTD. United Kingdom

7748 ROXAR FLOW MEASUREMENT AS STAVANGER, NO

7929 FMC FLUID CONTROL/INVALCO USA

7930 HALLIBURTON ENERGY SERVICES. USA

7931 AGAR CORP USA

Qualified For BUCKSTAYS FOR BOILER



4866 SAUDI METIN Saudi


Saudi


Qualified For BUSDUCT, METAL-ENCLOSED


6571 WESCOSA Saudi

Qualified For CABINET: SHUTDOWN, LOCAL, PNEUMATIC AND ELECTRIC WITH PARTIAL STROKE


6763 DRALLIM INDUSTRIES LTD United Kingdom

6765 BIFFI SPA FIORENZUOLA D'ARDA, IT

Qualified For CABLE ISOLATION EQPT.


7193 POSITRON INDUSTRIES 5101 BUCHAN STREET, MONTREAL, QUEBEC, CANADA

Qualified For CABLE SPLICE & TERMINATION KITS UP TO 132 KV


6499 ABB SWITZERLAND

6959 TAIHAN ELECTRIC WIRE COMPANY Korea



7130 LS CABLES Korea


7184 BRUGG CABLES SWITZERLAND

12 May, 2012 Page 21 of 181

7185 DAITWEILER United Kingdom

7186 ELASTIMOLD USA

7188 G & W USA & CANADA

7189 NEXAN SWITZERLAND

7190 PFISTERER IXOSIL SWITZERLAND

7191 RAYCHEM Germany



6500 ABB Germany

7022 DAINICHI-NIPPON CABLES (MITSUBISHI)

Japan

7029 DEMIRER KABLO/SAUDI CABLE CO. SAUDI CABLE CO. / TURKEY


7068 FURUKAWA ELECTRIC CO. LTD. Japan

7086 BRUGG TELECOM AG SWITZERLAND

7093 FUJIKURA Japan



6501 ABB Germany





Japan


7052 SHOWA CABLE Japan

7057 ALCATEL France




7094 FUJIKURA Japan

7098 NEXANS NORWAY AS NORWAY

7101 NKT Germany


7113 VISCAS FUJIKURA Japan

12 May, 2012 Page 22 of 181

7118 CANADA WIRE Canada

7123 KABEL RHEYDT (AEG) Germany


7134 HITACHI CABLE LTD. Japan

7136 MITSUBISHI CABLE INDUSTRIES LTD Japan

7138 PIRELLI GENERAL United Kingdom

7140 STANDARD TELEFON OG KABELFABRIK A/S

S / NORWAY

Qualified For CABLE TRAY AND ACCESSORIES


9292 Al-AMAL Co Saudi 1-Metalic Cable Tray Systems2-Ten (10) years extended warranty shall be applicable to all supplies dirctly or through supplier.

8107 SEICO Saudi

8108 Electric House Saudi

8109 SHAIRCO Saudi

8914 COOPER B-LINE INC. Saudi 1:Metallic Tray Systems2-Extend warranty shall be applicable to all supplies dirctly or through supplier.Ten (10) years warranty shall be applicable for first project and reduced yearly for subsequent project awards.

6699 WESCOSA Saudi

9720 Thomas & Betts Saudi Arabia Saudi

6719 MP HUSKY CORP. USA

7192 RAYCHEM USA



7311 SAUDI ELECTRIC INDUSTRIES CO. LTD.

Saudi

7315 3M USA

7316 AB WIRE SWEDEN

7317 ABAHSAIN-COPE Saudi

7318 EFCOR USA

7319 MECSS - MID EAST CABLE SUPPORT SOLUTIONS

Saudi

12 May, 2012 Page 23 of 181

7320 O-Z GEDNEY USA

7321 TOLARTOIS France

7322 T.J. COP, INC. USA

7323 B.LINE SYSTEMS, INC. USA

7324 SIECO Saudi

7325 ELECTRIC HOUSE Saudi

7326 SHAIRCO Saudi

Qualified For CABLE, POWER, 5 KV THROUGH 35KV


6986 ALCATEL HALDEN, NORWAY

6987 NEXANS (FORMERLY ALCATEL) Germany

6988 PIRELLI CAVIE SISTEMI SPA Italy

6989 FUJIKURA Japan


6992 JEDDAH CABLE CO. Saudi


6994 THE OKONITE CO. USA

6995 PIRELLI CABLE USA

6996 SAUDI MODERN CO. FOR CABLES, LTD. (RIYADH CABLES)

Saudi

6997 SAUDI CABLE COMPANY Saudi

Qualified For CABLE, POWER, 69 KV THROUGH 132KV



6998 SAUDI CABLE COMPANY Saudi

6999 ALCATEL KABLE AG & CO. (NEXANS) Germany

7000 FUJIKURA, LTD. Japan


7002 SAUDI MODERN CO. FOR METAL CABLES & PLASTIC IND., LTD.

RIYADH, SAUDI ARABIA

Qualified For CABLEBUS


6572 WESCOSA Saudi

6716 UNIBUS, INC. / POWELL-ESCO USA

6717 MDF CABLE BUS SYSTEMS USA

12 May, 2012 Page 24 of 181

6718 MP HUSKY CORP. USA

Qualified For Cables


636 saudi company for cables ind.ltd

Qualified For CAST RESIN INSULATED BUS DUCT


8865 MGC MOSER-GLASER France None

8864 ETA (BETOBAR) FRANCE, BELGIUM

None

Qualified For CATHODIC PROTECTION


9915 Corrosion Control Company AB Sweden

7519 ICP Italy

7520 WILSON WALTON Saudi

Qualified For CCPD/CCVT, 69KV UP TO 380 KV


6509 ABB SWEDEN

6691 VA TECH Italy

7331 ABB HV TECHNOLOGIES SWITZERLAND

7362 HAEFELY-TRENCH ELECTRIC Canada

7371 GE USA

7376 NISSIN Japan

7382 PASSONI & VILLA Italy

7383 RITZ USA

Qualified For CCW Cooler


10092 TSM Tech Co., Ltd. Korea

Qualified For CHECK VALVE (GAUGE GLASSES)


9397 CEPHAS PIPLINE CORPORATION Korea 1- Dual Check Valve2- Combined check valve

6366 CLARK-RELIANCE-JERGUSON GAGE AND VALVE CO

USA

6368 TYCO FLOW CONTROL-PENBERTHY INCORPORATED

USA

6369 SIMCO ENGINEERS United Kingdom

6370 CESARE BONETTI Garbagnate, IT

12 May, 2012 Page 25 of 181

6371 UTSUE Japan

Qualified For CHEMI. RESISTING COATING APPLICATORS


8082 GLOBAL SUHAIMI COM. Saudi

8081 HANI AL ELAIMI EST. Saudi

Qualified For Chemical Injection Skids


10108 A.E.S ARABIA LTD. (AES) Saudi

Qualified For CHIMNEY STACK & LINERS


8237 Mariani Battesta arabia Saudi

8150 SAUDI METAL COATING CO. Ltd. Saudi

8418 HADEK (Protective Pennguard Block) Netherlands For the Plants with : FGD and with Low Temperature Flue Gas Temperature

8318 SOCIETED ACOUSTIQUE INDUSTRIELLE (SAI)

France For GT with : - Maximum Exhaust Temp. 620 C- Maximum Exhaust Stack hight 60 m- Not Acceptable for GT- F Class or Equivalent

9171 Chimneys and Refractories International Saudi Only Construction of Chimneys with maximum height of 180 m.All supplied materials shall be subject to SEC approval.

8083 MARIANI BATTISTA ARABIA Saudi

8706 TechTowers for Power & Telecom,Aarding Thermal Acoustics

Netherlands Only for Gas Turbines

8655 BRADEN Europe B.V Netherlands For Gas Turbine and HRSG only

Qualified For CHLORINATION SYSTEM


8650 Cumberland Electrochemical Ltd United Kingdom For the following systems:1-Panclor land based electrochlorination plant2- Elchlor offshore & shipboard electrochlorination plant

8307 Daiki Ataka Engineering Co., Ltd Japan Model 10WL,Model 15WL,Model 35BL,Model 25BL

4961 DE NORA Italy

4962 JOHNSON MARCH USA

12 May, 2012 Page 26 of 181

Qualified For CHLORINE ANALYZERS AND CHLORINATORS


6520 ABB Sweden / USA

7556 DANIEL (EMERSON) -NATURAL GAS USA

7557 EG&G (URS) USA

7558 ROSEMOUNT (EMERSON) USA

7575 ADVANCE USA

7576 CAPITAL CONTROLS USA

7577 FISCHER & PORTER (ABB) USA

7578 WALLACE & TIEMAN (PENNWALT) USA

7707 ABB INSTRUMENTATION LTD. United Kingdom

7889 YOKOGAWA ELECTRIC CORP. Japan

7894 YOKOGAWA ELECTRIC KOFU PLANT Japan

7909 GLI INTERNATIONAL USA

7913 EMERSON - ROSEMOUNT ANALYTICAL DIVISION

USA


Qualified For CIRCUIT BREAKER, OUTDOOR, 34.5 KV TO 230 KV


6577 ABB POWER T & D CO. USA

6578 SIEMENS POWER T&D USA

5075 ALSTOM USA

Qualified For CIRCUIT SWITCHER, 69 –230 KV


6649 S & C Canada


Qualified For Circulating Water Pumps (CWP)


9995 DMW Japan -Model:VPF-Rate 1600m3/min-Head:32 m

Qualified For CIRCULATING WATER PUMPS AND MOTORS


9389 Hyundai Heavy Industries co., LTD. Korea Model VKNM, flow 73,000 m3/h, Total Head 23 meters.

12 May, 2012 Page 27 of 181

8945 KUBOTA Japan Flow (m3/h): 60,000Head (m) : 22Motor rating (kw) : 3,900

9998 HITACHI Japan

5086 SULZER PUMPS na

5090 FLOWSERVE na

5122 KSB Germany

5155 GOULDS PUMPS USA

5162 JOHNSTON PUMP COMPANY na

5164 EBARA PUMPS Japan

5165 TORISHIMA PUMPS Japan

5166 INGERSOLL RAND PUMPS USA

5167 WORTHINGTON PUMPS na

Qualified For Civil Works including pilling, concrete works, roads, cooling water pipes (erection), v


8060 SAUDI CONDRECO LTD Saudi

8061 SAUDI AL TERAIS TRADING INDUSTRIAL CONTRACTING CO. LTD

Saudi

Qualified For Cladding & Accessories for ST Hall, electrical and control building and Auxiliary buildi



8144 HAIRONVILLE France

8143 SADEC Saudi

8141 HESCO/CENTRIA Saudi

8232 Al-Saad Contracting & Saudi Metin Ltd. Saudi

8233 Arabian International Co. Saudi

8138 Al Saad Contracting & Trading Co Saudi

8142 UNICOIL Saudi

8048 HESCO/CENTRIA Saudi

8049 UNICOIL Saudi

Qualified For CLOSED CIRCUIT COOLING WATER COOLERS


10145 ECODYNE USA

5032 GEA Japan

5039 ALFA LAVAL Sweden

12 May, 2012 Page 28 of 181

5139 MARLEY/BALKE DURR Germany

5140 ALSTOM HEAT EXCHANGE Hungary

Qualified For CLOSED CIRCUIT COOLING WATER PUMPS


9769 TERMOMECCANICA Italy Model : DD

Qualified For CO2 PLANT


6346 AHG Saudi

6347 SIGAS Saudi

6348 AT&V Saudi

Qualified For COMBINED MAIN STOP AND CONTROL VALVE/ACTUATOR


5015 REXROTH USA

Qualified For COMBUSTIBLE GAS MONITORS


7916 GENERAL MONITORS INC USA

7918 DETCON INCORPORATED USA

7932 DETECTOR ELECTRONICS CORPORATED

USA

7933 GENERAL MONITORS IRELAND Galway, IE

Qualified For COMBUSTION TURBINE


5044 General Electric (GE) USA



5068 ALSTOM POWER France

8688 HITACHI Japan

Qualified For Compartment Ventiliation Fans


8422 illinois blower, inc. USA Model (1643)

Qualified For COMPOSITE OPTICAL OH GROUND WIRE (OPGW)


7061 DRAKA NK FINLAND


7095 FUJIKURA Japan

7110 PIRELLI Italy

12 May, 2012 Page 29 of 181

7155 ALCOA FUJIKURA LTD (AFL) United Kingdom


7175 PRYSMIAN TELECOM Spain

7312 CORNING CABLES (BICC) United Kingdom

7313 PHILLIPS FITEL Canada

Qualified For CONDENSATE PUMPS


9936 DMW Japan model: VPFRate: 2000 m3/min.Head: 32 m

Qualified For CONDENSATE PUMPS AND MOTORS


9146 Flowserve- Coslada Spain Models (APKD & QL )

9977 Hyosung GoodSprings, Inc.(HGS) Korea

8957 KUBOTA Japan For :1-Condensate Booster PumpModel No : MV-V(P)/DF-V(P)Flow : 1,500 m3/hrHead : 280 m Motor rating : 880 kw 2-Condenste Extraction Pump Model No: MV-V(P)/DF-V(P)Flow : 1500 m3/hr Head : 190 mMotor rating :540 kw

9390 Hyundai Heavy Industries co., LTD. Korea Model VW, max flow 1800 head 325 meter

5085 SULZER PUMPS na


5096 EBARA Japan

5102 HITACHI Japan

5121 KSB Germany



12 May, 2012 Page 30 of 181

5156 TERMOMECCANICA Italy

8694 TORISHIMA PUMPS Japan

Qualified For CONDENSER VACUUM SYSTEM


5208 SVS Germany

Qualified For CONDENSER, AIR COOLED (ACC)


10079 S&T Corporation Korea •Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

9879 Hamon D'Hondt Middle East Saudi - Engineering and Design must be done at Research-Cottrell Dry Cooling office,Belguim.-All Stainless and Carbon steel headers and pressure parts must be supplied from France.-All installed Fans,Motors and Gearbox shall be supplied from USA,West Europe or Japan.

9798 GEA EGI Contracting Hungary

5033 GEA Energietechnik GmbH South Africa

5136 SPX Cooling Technologies, Inc. (MARLEY)

USA / Belgium / Germany / UK

Qualified For CONDENSER, WET SURFACE



8743 BHI Korea



5070 ALSTOM na

5135 SPX (MARLEY) na

5204 GRAHAM MANUFACTURING USA

5205 TEI na

5206 YUBA na

5207 HOLTEC INTERNATIONAL na

Qualified For CONDUCTIVITY ANALYZERS


12 May, 2012 Page 31 of 181






USA

7934 HORIBA INSTRUMENTS USA

Qualified For CONNECTORS, OVERHEAD LINE COMPRESSION TYPE


7168 INDUSTRIAS ARRUTI Spain

7187 ELASTIMOLD USA

7220 A SALVI & C SPA Italy

7222 ALCOA USA

7226 CAROBENI Italy

7228 FCI (SAAE) France

7231 ISELFA Italy

7237 PFISTERER SWITZERLAND

7241 SICAMEX France

7243 DALEKOVOD CROATIA

7245 BURNDY USA

7246 HOMAC USA

7247 MOSDORFER GMBH Austria

Qualified For CONSTRUCTION OF BUILDINGS & CIVIL WORKS



Saudi

8064 AZZAM TRADING & CONTRACTING EST.

Saudi

8065 SAUDI CYPRIN CONST. CO. LTD. Saudi

8066 UNITED CONSTRUCTION CO. Saudi

Qualified For CONTINUOUS EMISSION MONITORING ANALYZERS


8314 Forbes Marshall India Models:(GCEM4000,GCEM 1000,VCEM 5000,DCEM 2100)

8922 IMR Engineering Company Germany Model - IMR 7500

7885 SERVOMEX UK LTD. United Kingdom

7898 AMETEK PROCESS INSTRUMENTS USA

12 May, 2012 Page 32 of 181

7901 SICK-MAIHAK AG Poppenbütteler Bogen 9b, 22399 Hamburg, DE

7935 ABB ANALYTICAL United Kingdom

7937 EMERSON PROCESS MANAGEMENT USA

7939 KVB ENERTEC (GE) USA

Qualified For CONTROL VALVE


7542 FISHER CO. – PREFERRED USA

7543 MASONELIAN (DRESSER) USA

Qualified For CONTROL VALVES - BALL AND ECCENTRIC PLUG (CHARACTERIZED); VALVE: CONT


10040 Crane Valve Group / Krombach Germany

9402 S&S Valve Korea 1- Ball ValvesModels : ANSI 600 , Size 300 mm 2- Cryogenic ValvesModels : ANSI 600Only for Water & Fluid application

6377 FISHER CONTROLS INCORPORATED USA

6381 FISHER ROSEMOUNT HUNGARY LTD SZEKESFEHERVAR, HU

6385 FISHER ROSEMOUNT S.A. France

6390 FLOWSERVE CORPORATION USA

6395 MASONEILAN DIVISION USA

6404 DRESSER AL-RUSHAID VALVE & INSTRUMENT/ ASHCROFT (MASONEILAN)

Saudi

6408 DRESSER PRODUCTS INDUSTRIES France

6412 NIPPON FISHER CO. LTD. Japan

6415 METSO AUTOMATION OY HELSINKI, FI

Qualified For CONTROL VALVES - BUTTERFLY AND ROTARY PLUG; VALVE: CONTROL; BUTTERF


9050 KSB Amri France Manafactured in France Only

8435 Samshin Limited Korea

12 May, 2012 Page 33 of 181

8459 Crane Valve Group / Krombach Germany 1-Butterfly Valves:- Only for Steam & Water .Models: Double & Triple Eccentric- Size : 6" 136"2- Ball Valves, no Limitation

9148 CEPHAS PIPLINE CORPORATION Korea •Concentric, -Double & Triple and quadruple offset design.•80 mm to 900 mm ANSI CLASS 600,•1000 mm to 4000 mm with Double , Triple and quadruple offset design, ANSI Class 300.


6382 FISHER ROSEMOUNT HUNGARY LTD Szekesfehervar, HU





Saudi


6416 METSO AUTOMATION OY HELSINKI, FI

6417 FISHER CONTROLS INC USA

6419 FLOWSERVE CORPORATION United Kingdom

Qualified For CONTROL VALVES - SEVERE AND NON-GENERAL SERVICE; VALVE: CONTROL; NO


6374 SEVERN GLOCON LTD. United Kingdom Digital positioner to be supplied from other approved vendors






6402 NIIGATA MASONEILAN CO LTD Japan


Saudi


12 May, 2012 Page 34 of 181



6421 MACHINEFABRIEK MOKVELD B.V. GOUDA, NL

Qualified For CONTROL VALVES: AXIAL FLOW


6422 MACHINEFABRIEK MOKVELD B.V. GOUDA, NL

6423 DANIEL VALVE COMPANY USA

6424 DRESSER AL-RUSHAID Saudi

Qualified For CONTROL VALVES; AUTOMATIC RECIRCULATION


6427 SCHROEDAHL ARAPP GMBH & CO. KG REICHSHOF-MITTELAGGER, DE

6428 H. SCHROEDER & CO. GMBH & CO. KG GUMMERSBACH-ELBACH, DE

6429 TYCO VALVES & CONTROL-YARWAY USA

Qualified For CONTROL VALVES; DESUPERHEATING




6430 FISHER CONTROLS USA

Qualified For CONTROL VALVES; GLOBE; VALVE: CONTROL; GLOBE; INCLUDING ACTUATOR, PO



9566 Nihon Koso Co Japan

9398 Samshin Limited Korea Gate Globe Check valves Forged : Size up to 50 mm and ANSIpressure class 600 to 4500

8426 S&S Valve Korea 1. Gate Globe Check Valves Forged : Models : ANSI (600 : 4500) Size up to 50 mm2. Gate Globe Check Valves Casting: Models : ANSI (150:2500) Size 50 mm up to 900mm3. Control Valves Models : ANSI 2500 , Size up to DN 50 Models : ANSI 1500 , Size DN

6372 UTSUE Japan

6373 SEVERN GLOCON LTD. United Kingdom Digital positioner to be supplied from other approved vendors

12 May, 2012 Page 35 of 181

6375 FISHER NIPPON CO. LTD. Japan







6401 NIIGATA MASONEILAN CO LTD Japan


Saudi


6410 DRESSER ITALIA SPA Italy

Qualified For CONTROLGEAR, FIREWATER PUMP MOTOR


8799 FIRETROL, INC. USA None

8983 JOSYLN CLARK USA None

8982 FIRETROL, INC. USA None

8800 JOSYLN CLARK USA None

Qualified For CONTROLGEAR, OUTDOOR, HIGH VOLTAGE, SUBMERSIBLE PUMP


8978 ARABIA ELECTRIC, LTD. Saudi None

8981 WESCOSA Saudi None

8977 ABB ELECTRICAL IND., LTD. (AEIL) Saudi None

8979 HAWA EPBF Saudi None

8980 REMAL Saudi None

Qualified For CONTROLLERS – FIELD


7631 FOXBORO COMPANY (INVENSYS) USA

8002 RONAN ENGINEERING CO. United Kingdom

8005 EMERSON FISHER CONTROLS USA

Qualified For COOLING TOWERS


5031 GEA Japan

5134 SPX (MARLEY) USA

12 May, 2012 Page 36 of 181

5137 MIDWEST TOWERS, INC USA

5138 INTERNATIONAL COOLING TOWER USA

Qualified For COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD


6917 FURSE Saudi

7307 GANSEC SHENGYUEAN WIRE & CABLE CO. LTD.

China

7308 ILJIN CORP./JIWOONG ELECTRIC CO. Korea

7309 LTV COPPERWELD USA

7310 SAUDI ELECTRIC INDUSTRIES CO. LTD.

Saudi

Qualified For DC SWITCHBOARD


9010 ABB Saudi None

9011 SCHNEIDER ELECTRIC Saudi None

9012 GE Saudi None

Qualified For DCS CONTROL DESK


8035 EMERSON USA

8041 IMAGE VISION USA

8042 ENVAS USA

Qualified For DEADTANK SF6 BREAKERS, 230 KV



6612 AREVA USA



7342 GE-HITACHI HVB USA

Qualified For DEADTANK SF6 BREAKERS, 69 KV



6610 AREVA USA




12 May, 2012 Page 37 of 181

Qualified For DEADTANK SF6 BREAKERS,110 - 132 KV


6503 ABB SWITZERLAND


6611 AREVA USA


6660 SIEMENS USA



Qualified For DECENTRALISED PROGRAMMABLE CONTROLLERS (PLC)


7594 ALLEN BRADLEY (ROCKWELL AUTOMATION)

USA

7945 ABB INSTRUMENTATION PERO, IT

8008 SIEMENS-SIMATIC Germany

8009 GENERAL ELECTRIC -FANUC USA

8010 SCHNEIDER ELECTRIC -MODICON France & USA

8011 ALSTOM POWER E.C.S. France & Italy

Qualified For DEMINIRALIZATION & POTABILIZATION SYSTEM



5186 TERMOKIMIK Italy

5188 ONDEO USA

5190 OVIVO (CHRIST) USA/UK

5193 GLEGG USA

Qualified For DEMINIRALIZATION WATER TREATMENT SYSTEM & POTABILIZATION SYSTEM


9377 A.E.S ARABIA LTD. (AES) Saudi Capacity up to : 500m3/hr

9825 Hyorim Industries Inc. Korea - Demin water Plants capacity up to 205 m³/h-Potable Water Process Capacity up to 15 m³/d-Condensate Polishing Plants Capacity up to 680 m³/h

12 May, 2012 Page 38 of 181

9262 Water & Environment Technologies Co. Ltd (WETICO)

Saudi Up to 80 m³/HrConditions:The main equipment for the plant must be supplied from one of the following suppliers: 1-Pumps

a-KSB pumps ( Germany or France)b-Grundfos ( Denmark )c-Flowserve ( Holland or Finland)d-Flygt ( Sweden )e-Tsurumi (Japan)

2- Pressure vessels for the Reverse osmosis membranes from:

a-Bekart ( Spain )b-Codeline ( USA)

3- Vessels: Filter Vessels, Cation vessels, anion vessels and mixed bid Vessels by

a-M/S. Wetico. ( KSA ) b-M/S. Ferrofab ( UAE)

4- RO membranes from:a- Filmtec ( USA )b-Toray (Japan )c-Hydranautics ( USA5- Resin for the Cation, Anion and Mixed bed from:a-Dow Chemicals ( USA)


5185 TERMOKIMIK Italy

5187 ONDEO USA


5192 GLEGG USA

5194 US FILTER NA

5196 GE WATER TECHNOLOGIES (GLEGG) na

5198 WATER AND POWER TECHNOLOGIES na

5200 ECOLOCHEM na

5202 METITO NA

Qualified For DENSITY METER; GAS AND LIQUID





12 May, 2012 Page 39 of 181

7928 KDG INSTRUMENTS LTD / SOLARTRON MOBREY

United Kingdom

Qualified For DESALINATION PLANT


10106 A.E.S ARABIA LTD. (AES) Saudi Capacity uo to :4200 m3/hr

9726 ASTER S.p.A Italy 1: MSF Desalination Plants: Capacity up to 5000 m3/day.2: MED with Thermal Vapour Compression Desalination Plants: Capacity up to 100 m3/hr

6349 BABCOCK HITACHI Japan

6350 DOOSAN Korea


Saudi Up to 350 m³/HrCondtions:The main equipment for the plant must be supplied from one of the following suppliers: 1-Pumps







Qualified For DIESEL DRIVEN GENERATORS


9156 DOOSAN ENGINE Korea Model # 12V32/40

9244 GE USA For Models:V228 ,V250 , L250

8343 MAN Diesel SE garmany

12 May, 2012 Page 40 of 181

8637 Hyundai Heavey Industrial Korea Model HiMSEN- H17/28,Output 0.5 to 0.9 MW- H21/32, Output 1.2-1.8 MW- H25/33 Output 1.4-2.6 MWH32/40, Output 3-10 MW

6749 BALDORGEN USA

6750 DETRIOT DIESELS USA

6752 CUMMINS ENGINE USA

6753 STEWART & STEVENSON USA

6754 ATLAS COPCO AIRPOWER N.V. Antwerp, Belgium

6755 CATERPILLAR USA

6751 WARTSILA POWER CONTRACTING CO. LTD

Finland

Qualified For DIFFERENTIAL PRESSURE GAUGES



7723 MERIAM INSTRUMENTS DIV USA

7763 HONEYWELL, INC. USA

7767 ABB INSTRUMENTATION LTD United Kingdom

7782 DRESSER AL-RUSHAID VALVE & INSTRUMENT/ ASHCROFT

Saudi

7787 DRESSER EUROPE GMBH (INSTRUMENT DIV)

Germany

7792 BARTON INSTRUMENT SYSTEMS LTD. BOGNOR REGIS

7805 DWYER INSTRUMENTS, INC USA

Qualified For DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV



6616 AREVA France

6633 EFACEC PORTUGAL


6650 S & C USA


7347 ALPHA NIDAU SWITZERLAND

7348 HAPAM Netherlands

12 May, 2012 Page 41 of 181

7349 MG/EGIC France

7350 SDCEM France

7351 SOUTHERN STATES USA

Qualified For DISTRIBUTED CONTROL SYSTEM


9926 Yokogawa Electric Asia Pte.Ltd.Singapore Singapore



9820 Invensys Saudi Arabia Co Ltd. Saudi FOXBORO DCS model IIA Series V8.5& 8.6- All equipment, Instruments & components(Controllers, 110 Cards, Processors,Communication cards, Power Supplies etc,)shall be from FOXBORO-USA.- All Panels & Marshalling Cabinets shall beprocured from MIS RITAL- Germany.

8974 Yokogawa-Saudi Arabia Saudi 1. DCS: Models CENTUM- VP.2. All equipment, instruments & components (Controllers, I/O cards, Processors, Communication cards, power supplies etc) shall be from Yokogawa factory-Singapore.3. All Panels & Marshalling Cabinets shall be procured from M/s. RITAL-Germany.

6523 ABB Germany

8034 EMERSON USA

5047 GE USA



5076 ALSTOM France

Qualified For Diverter/ Bypass & Weather Dampers and drive system


9173 Effox-Flextor Canada

9448 Nem Power System Germany

9450 Fellow Japan

9449 Samkwang Power System Korea

12 May, 2012 Page 42 of 181

Qualified For Diverters


9399 Samshin Limited Korea

Qualified For DOSING PUMPS FOR CHEMICALS


4963 JOHNSON MARCH Germany

Qualified For DOSING SYSTEM


6464 COOPERHEAT SAUDI ARABIA Saudi

6466 AL-HOTI Saudi



Qualified For Drum Screen


9938 OVIVO (BRACKETT GREEN) United Kingdom

Qualified For DRUM SCREENS


9765 HUBERT STAVOREN B.V. Netherlands Diameter : 5 – 16 m , Width : 2 – 5 m , Screen mesh ranges : 2 – 10 mmCapacity : 5,000 m³/h - 165,000 m³/hDifferential pressure of 1meter water column Design :In-Out and Out- In type

6441 FMC France

6444 BOUDRY France

Qualified For DUCT SEALING UNITS


7327 AMIANTIT RUBBER IND. (ARIL) Saudi

7328 UM- AL QUWAIN RUBBER INDUSTRIES UAE

Qualified For Dust Analyzer


9756 IMR Engineering Company Germany Model - IMR 200,DR220

Qualified For DYNAMIC SYSTEM MONITORING EQUIPMENTS


7424 DIGSILENT GMBH Germany

7425 POWER TECHNOLOGY INC. (PTI) USA

Qualified For E/I TRANSDUCERS


12 May, 2012 Page 43 of 181



8007 ROCHESTER INSTRUMENT CO. USA

Qualified For Earthing System & Accessories


8727 Galmar Marciniak spolk jawna Poland -Copper-Bonded rods and accessories-Copper and copper-bonded tapes and wires -Copper-clad steel grounding conductor

6944 SAUDI CABLE Saudi EARTHING BONDING CABLE

7041 J-POWER SYSTEM CORP. Japan EARTHING BONDING CABLE

7106 PIRELLI KABEL AND SYSTEM GMBH Germany EARTHING BONDING CABLE

7128 LS CABLES Korea EARTHING BONDING CABLE

7144 FUJIKURA VISCAS CORP Japan EARTHING BONDING CABLE

7152 SAUDI MODERN CO. (RIYADH CABLES)

Saudi EARTHING BONDING CABLE

Qualified For ELECTRICAL TRANSMITTER (INCL. TEMP. TRANSMITTER)


7837 RUEGER (TEMP. TRANSMITTER) Switzerland

7838 TEMP PRO (TEMP. TRANSMITTER) USA

7839 THERMO EST (TEMP. TRANSMITTER) France

7840 SIEMENS AUTOMATION Saudi

Qualified For Electrostatic Precipitator (ESP)


9312 Lodge Cottrell Limited United Kingdom

9382 NOL-TEC USA

8730 IHI Japan

9371 Fisia Babcock Environment Gmbh Germany All Sub-Vendor should be in SEC approved vendor list.

Qualified For Electrostatic Precipitators (ESP)


9410 ALSTOM Sweden AB

Qualified For Emergency Shutdown System (ESD)


12 May, 2012 Page 44 of 181

9323 Yokogawa-Saudi Arabia Saudi 1. ESD: Models Prosafe- RS2. All equipment, instruments & components (Controllers, I/O cards, Processors, Communication cards, power supplies etc) shall be from Yokogawa factory-Japan.3. All Panels & Marshalling Cabinets shall be procured from M/s. RITA

Qualified For ESD PROGRAMMABLE CONTROLLER SYSYTEMS; EMERGENCY SHUTDOWN SYSTE


7948 INDUSTRIAL CONTROL SERVICES LTD.

United Kingdom

7949 INDUSTRIAL CONTROL SERVICES USA

7950 TRICONEX CORPORATION USA

Qualified For Expansion Joints


9843 Dekomte Belgium \ Germany

10055 SEIRIS SA France

Qualified For Fabric Filters (FF)


9411 ALSTOM Sweden-AB

Qualified For Fans


9432 Howden UK Centrifugal and Rotary

Qualified For FAULT RECORDERS


7422 AMETEK USA

7423 QUALITROL HATHAWAY NORTHERN IRELAND

Qualified For FEEDWATER TANK AND DEAERATOR


10075 Daechang HRSG Corporation Korea

10077 DKT Co.Ltd Korea •All Engineering and Design work must be reviewed and approved by SEC's accepted OEM•Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

12 May, 2012 Page 45 of 181

9896 Tech International FZC UAE As fabrication shop only

8742 BHI Korea




4691 HITACHI LTD. Japan

5131 ALSTOM HEAR EXCHANGE Hungary

Qualified For FENCING, DRAINAGE, MIXING BASINS, PIPE TRENCHES



Saudi

8067 ASSAD SAID CORPORATION Saudi

Qualified For FGD


8729 IHI Japan

Qualified For FIELD INSTRUMENTATION FOR BOILER


7599 FISHER ROSEMOUNT Italy / USA

7600 TEMPRO USA

7601 BAILEY (ABB) USA

5066 SIEMENS Saudi

Qualified For Fin Fan Coolers


9953 Hamon D'Hondt Middle East Saudi - Engineering and Design must be done at Research-Cottrell Dry Cooling office,Belguim.-All Stainless and Carbon steel headers and pressure parts must be supplied from France.-All installed Fans,Motors and Gearbox shall be supplied from USA,West Europe or Japan.

Qualified For FIRE DETECTION, FIRE ALARM & FIGHTING SYSTEM


6459 MINIMAX (MAIN EQUIPMENT) Germany

6460 RAJAB & SILSILAH Saudi

6461 SAUDI MINERVA Saudi

6462 SERVICES S.A.S. Saudi

12 May, 2012 Page 46 of 181

Qualified For Fire detection, Fire Alarm & Fighting system (Supply & Erection)


8287 SASEQ Saudi

8289 ENERGY HOUSE TRAD.& CONT.CO.LTD

United Kingdom

8285 Thorn United Kingdom

8284 Gent United Kingdom

8283 Salem Agencies & Services S.A.S. (turnkey supplier)

Saudi

8282 SAUDI MINERVA Saudi

8281 Rajab & Silsilah Saudi

8280 MINIMAX (main equipment) Germany

8279 ENERGY HOUSE TRAD.& CONT.CO.LTD

Saudi

Qualified For FIRE PROTECTION/ THERMAL INSULATION & ACOUSTIC / SUSPENDED CEILING


8091 SHUMAN INTERNATIONAL CO. Saudi

8176 Shuman International Co. Saudi

Qualified For Fire Protection/Thermal Insulation* (Monokote)


8175 Faisal I Naimi Saudi


8173 Shuman International Co. Saudi

Qualified For FIRED HEATERS: BOX TYPE FURNACE


4884 KOREA HEAVY INDUSTRIES AND CONSTRUCTION

KYUNGYAM, KR

4907 FOSTER WHEELER ITALIANA SPA SORSICA, IT

4992 NIIGATA ENGINEERING CO., LTD. Japan

4994 COOPERHEAT UK, LTD. United Kingdom

4995 SITICEM MONTAGGI-E MANUTENZIONI SPA

PISA, IT

4768 MITSUBISHI HEAVY INDUSTRIES, LTD. Japan

Qualified For FIRED HEATERS: DIRECT FIRE FURNACE



KYUNGYAM, KR

12 May, 2012 Page 47 of 181

4905 FOSTER WHEELER ITALIANA SPA Italy

4908 G.C. BROACH COMPANY USA

4910 TAKAHASHI IRON WORKS CO., LTD. Japan


Qualified For FIRED HEATERS: FURNACE, INDIRECT FIRED


4825 KCC PROCESS EQUIPMENT, LTD. SUNBVRY-ON-THAMES


KYUNGYAM, KR

4906 FOSTER WHEELER ITALIANA SPA Italy

4909 G.C. BROACH COMPANY USA


Qualified For FIRST OIL FILLING FOR STEAM TURBINE


5218 SHELL Saudi

Qualified For FITTING: TUBING; FLARED; INCLUDES ADAPTERS, SLEEVES, NUTS, CONNECTORS,


6437 CRAWFORD FITTING CO. (SWAGELOK)

USA

6438 PARKER HANNIFIN CORP. (CPI) United Kingdom

6439 HOKE, INC (GYROLOK) United Kingdom

6440 PARKER HANNIFIN (A-LOK) Am Metallwerk 9, 33659 Bielefeld, DE www.Parker.com

Qualified For FLAME ARRESTORS


6359 TYCO – VAREC USA

7940 L & J TECHNOLOGIES (SHAND AND JURS)

USA

Qualified For FLAME MONITORING SYSTEMS


7846 HONEYWELL, INC USA

7943 HAMWORTHY COMBUSTION ENGINEERING

United Kingdom

7944 ABB INSTRUMENTATION PERO, IT

7946 FIREYE ELECTRONICS USA

7947 FORNEY INTERNATIONAL USA

12 May, 2012 Page 48 of 181

Qualified For FLOW INDICATOR



Qualified For FLOW NOZZLES


7743 EMERSON-DANIEL DIVISION USA

7755 CRANE MANUFACTURING, INC Tulsa, OK

7756 FLUIDIC TECHNIQUES/FTI INDUSTRIES USA

Qualified For FLOW SIGHT GLASSES



7662 ERNST GAGE CO. USA

7663 CLARK-RELIANCE-JACOBY-TARBOX CORP (JERGUSON).

USA

7664 TYCO FLOW CONTROL-PENBERTHY INCORPORATED

USA

Qualified For FLOWMETER, VARIABLE AREA, ROTAMETERS


7647 SOLARTRON MOBREY United Kingdom

7650 KROHNE-MESSTECHNIK GMBH & CO KG

Germany


7661 BROOKS INSTRUMENTS (EMERSON) USA

Qualified For FLOWMETER; ANNUBAR; PITOT TUBE



7722 MERIAM INSTRUMENTS DIV USA

7724 EMERSON-ROSEMOUNT DIVISION USA

Qualified For FLOWMETER; CORIOLIS MASS


7689 FMC ENERGY SYSTEMS/MEASUREMENT SOLUTIONS

USA

7730 FOXBORO COMPANY USA

7757 EMERSON/MICRO MOTION INC. USA

Qualified For FLOWMETER; MAGNETIC



7718 BOPP AND REUTHER MESSTECHNIK Mannheim, DE

12 May, 2012 Page 49 of 181


7727 BROOKS INSTRUMENT BV Veenendaal, NL



Qualified For FLOWMETER; MULTIPATH ULTRASONIC; GAS SERVICE



USA

7737 KROHNE Germany


7745 SICK-ENGINEERING GMBH Germany

7746 INSTROMET INTERNATIONAL NV ESSEN, BE

Qualified For FLOWMETER; POSITIVE DISPLACEMENT; BI-ROT


7674 DANIEL EUROPE LTD. United Kingdom


USA

7710 BARTON INSTRUMENT SYSTEMS LTD. United Kingdom

7717 BOPP AND REUTHER MESSTECHNIK MANNHEIM, DE

7719 BADGER METER, INC USA

7720 BRODIE METER CO., LLC USA

Qualified For FLOWMETER; TURBINE; IN-LINE



USA

7698 DANIEL MEASUREMENT & CONTORL USA



7716 DANIEL MEASUREMENT & CONTROL CHIHUAHUA, MX

Qualified For FLOWMETER; VORTEX; VORTEX SHEDDING







12 May, 2012 Page 50 of 181

Qualified For Flue Gas Desulphurization (wet FGD and dry FGD)


8923 AE&E Germany Sea Water Flue Gas Desulphurization Plant (SWFGD) Only

Qualified For Flue Gas Desulphurization plant (SWFGD)


9412 ALSTOM Norway AS


Qualified For FOLDING DOORS, METAL DOORS & FRAMES


8154 Al Kuhaimi Metal Industries Ltd. Saudi

8087 AL-KUHAIMI METAL INDUSTRIES LTD. Saudi

Qualified For FOLDING SHUTTER DOORS


8156 ASCOT IND. DOORS LTD./KHALID AL HOWAISH

United Kingdom

8089 ASCOT IND. DOORS LTD. KHALID AL-HOWAISH

Saudi

8243 ASCOT IND. DOORS LTD United Kingdom


Qualified For FORM-WOUND BRUSHLESS SYNCHRONOUS MOTORS



6552 GENERAL ELECTRIC PETERBOROUGH, ON, CANADA

5074 ALSTOM NANCY, FRANCE

Qualified For FORM-WOUND INDUCTION MOTORS: 250 HP AND ABOVE


6474 ABB VASTERAS, SWEDEN


6551 GENERAL ELECTRIC CAMPINAS, BRAZIL


6736 HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

6737 LAURENCE, SCOTT & ELECTROMOTORS UK

United Kingdom

6738 TECO - WESTINGHOUSE USA

6739 TMA ELECTRIC CORP. WEST Japan

12 May, 2012 Page 51 of 181

6740 TMA ELECTRIC CORP. EAST Japan

6741 ASIROBICON SPA (ANSALDO) Italy

5073 ALSTOM NANCY, FRANCE

Qualified For FREQUENCY TRANSDUCERS


6715 ALSTOM USA

Qualified For FRP Pipes & fittings, GRP pipes & fittings, Pre-stressed concrete cooling water pipes


8145 SAUDI ARABIAN AMIANTIT Saudi

Qualified For FTIR/NIR ANALYZERS; ANALYZER; NIR SPECTROMETER



7882 HAMILTON SUNDSTARND USA

7936 ABB ANALYTICAL United Kingdom

Qualified For FUEL GAS COMPRESSORS


5045 GE USA

5226 DRESSER RAND Singapore

5231 AC COMPRESSOR USA

5233 UNIVERSAL COMPRESSION USA

5252 MAN na

5253 ROLLS ROYCE na

5254 DRESSER – RAND na

5255 ATLAS COPCO Antwerp, Belgium


Qualified For FUEL GAS TREATMENT


5239 ANDERSON SEPARATOR/CLARK RELIANCE/NATIONAL FILTRATION

USA

5240 BURGESS MANNING na

5241 FLOWTRONEX na

5242 GAS PACKAGERS na

5243 GTS ENERGY na

5244 HANOVER SMITH na

5245 OIL & GAS SYSTEMS na

12 May, 2012 Page 52 of 181

5246 PEERLESS Dalas,USA

5249 TOTAL ENERGY RESOURCES na

5250 TRAN-AM na

5251 UNIVERSAL COMPRESSORS na

Qualified For FUEL OIL EQUIPMENT (HEATERS, FILTERS, CHEMICAL FUEL)


5177 COLFAX CREOSOTING CO USA

5178 CAMPI (HEATERS) Italy

5179 METI (FILTERS) Italy

Qualified For FUEL OIL PUMPS



5098 EBARA Japan

5169 ALL WEILER Germany

5170 IMO USA

5172 LEISTRITZ Germany

5174 CERPELLI Italy


Qualified For Fuel Oil Treatment Plant


9333 ALFA LAVAL Sweden

9334 Westfalia Germany

Qualified For Fuel Skids


10096 ZAMIL STEEL INDUSTRIES PED

9239 Integrated Flow Solutions USA For Following :1. Fuel (Unloading / Transfer) Skids Packages(unloading,transfer,forwarding and heating skids)2. Fuel Gas System Skids Packages for Natural Gas cleaning and conditioning

Qualified For Fuel/Oil Storage Tanks/Water Storage Tanks, etc*


10095 ZAMIL STEEL INDUSTRIES PED Saudi

12 May, 2012 Page 53 of 181

9322 Oksan E & C Korea -Up to 25,000 m3 -Fix Roof tank- Only for Water

8194 Arabian CBI Ltd. Saudi

8197 Arabian Tank & Vessel Saudi

8196 Al Zamil Heavy Industries Saudi


Qualified For GALVANIZED GUY WIRE (GROUNDING)


7234 JOSLYN USA

7303 SOUTHWIRE USA

7306 TREFILEUROPE France

7314 FLORIDA WIRE & CABLE USA

Qualified For Gas Flow & Pressure Analyzer



Qualified For Gas Turbine Cooling Fan



Qualified For Gas Turbine Exhaust Frame Cooling Fan Blowers



Qualified For Gear-Boxes


10016 Hansen Industrial Transmissions nv Belgium Only for auxiliary and BOP systems and up to 180 KW.

Qualified For Generator circuit breaker


8075 ALSTOM Grid France

8074 ABB Switzerland

8076 SIMENES Germany

Qualified For GENERATOR CONDITION MONITOR


7554 E-ONE, GCMX USA

Qualified For GENERATOR COOLER


12 May, 2012 Page 54 of 181

5030 GEA Germany

5035 COLD + HOT Switzerland

Qualified For GENERATOR ROTOR


5081 ALSTOM POWER SWITZERLAND

Qualified For GENERATOR STATOR


5080 ALSTOM POWER POLAND

Qualified For GENERATOR UNIT TRANSFORMERS (GUT)


8569 ELIN Austria Up to 250MVA ,400KV

8568 ABB TURKY Up to 250MVA ,400KV

8562 HITACHI Japan No limitation for capacity and voltage.

8567 SIEMENS Germany No limitation for capacity and voltage.

8566 ALSTOM GRID TURKEY Up to 800MVA ,400KV with OFAF cooling.Up to 510MVA , 400KV , 400KV with ONAN/ONAF cooling only

8565 ABB Germany Up to 250 MVA, 400KV

8563 ABB SWEDEN-ludvika

No limitation for capacity and voltage.

9834 CG Power Systems Belgium NV/ Mechelen Plant

Belgium -250 MVA/ 220 kV- Two/Three windings only.- In case of two LV windings, it shall be radial split windings.

8670 ABB Spain With the presents test facility status the factory is qualified:Up to 250 MVA,400KV only

8668 SMIT TRANSFORMER B.V. Netherlands-Nijmegen

- With present Test Facilities, the factory is approved up to 600 MVA, 400 KV.With ONOF &ONAF cooling.- With installation of 40 MVA Generator and increasing ceiling height to 23 m, it will be revised for 900MVA ,400 KV with ONAN ,ONAF and OFAN cooling on

9837 CG Electric System Hungary zrt. / Tapioszele Plant

Hungary - 120 MVA / 132 KV- Two windings only.

9290 Fortune Electric Co Taiwan 250 MVA/132 KVFor the first order of each rating and type,the design of transformer to be vetted and approved by Hitachi.Compliance of this shall be submitted to SEC for approval & record.

12 May, 2012 Page 55 of 181


Korea Upto 250 MVA & 380 KV with one/two LV windings.HHI shall comply fully with SEC – Generation Sector Specification (SEC - GP - 001 - R 03 (2011) with attached Performance and Guarantee Schedule Layouts and annexs.and shall accept short circuit test on transf

8732 ABB Spain Upto 120MVA, 132 KV only.

Qualified For GENERATOR WATER / SEALING OIL SYSTEM / H2 SYSTEM


5028 ROTAN Germany

Qualified For Generators


9152 ANSALDO ENERGIA S.p.A. Italy Air Cooled Generators Up to 300MVA for60HzModeles; (WY18Z,WY21Z,WY23Z,WX18Z,and WX21Z&WX23Z)

Qualified For GLAND STEAM CONDENSER


5016 SOUTHERN HEAT EXCHANGER USA

5018 ITT INDUSTRIES USA

5020 STRUTHERS INDUSTRIES USA

5021 KRUEGER ENGINEERING & MFG. CO. USA

5022 HERING Germany

Qualified For GLAND STEAM EXHAUSTER


5024 GARDNER DENVER USA

5026 THE NEW YORK BLOWER CO. USA

5027 CHICAGO BLOWER CO. OR EQUIVALENT

USA

Qualified For GRAPHIC DISPLAYS; MAPBOARD AND PROCESS DIAGRAMMATIC


7997 AMETEK-ROCHESTER INSTRUMENT SYSTEMS LTD

United Kingdom

7999 ABB AUTOMATION LTD United Kingdom

8001 RONAN ENGINEERING CO. United Kingdom

8003 RTK ENGINEERING United Kingdom

8004 MAUELL Velbert, DE

12 May, 2012 Page 56 of 181

Qualified For GRAVITOMETERS




Qualified For GROUND WIRE





7224 ALCOA USA

7300 MIDAL CABLE LTD. Bahrain

7302 SOUTHWIRE USA

7304 ECN CG SA Spain

7305 TREFILEUROPE France

Qualified For GTG intake / exhaust systems


9286 ATCO Canada GAS Turbine and HRSG Exhaust System

9859 BIS Gerber Gmbh Germany

9999 Braden Manufacturing LLC USA For Gas Turbine and HRSG only

9905 Northern Technical L.L.C. UAE For:1-Simple Cycle Power Plant2-Supporting acceptance letter shall be provided from Gas Turbine Manufacturer.

9254 Advance Triad - Turbine Services Ltd. Saudi M/S BIS Gerber GmbH-Germany (Filter House Re-Engineering).

Qualified For H2 GAS DRYER


7555 E-ONE, LECTRODRYER USA

Qualified For HARDWARE FITTINGS



7218 A B CHANCE USA

7219 A SALVI & C SPA Italy

7221 ALCOA USA

7225 CAROBENI Italy


12 May, 2012 Page 57 of 181

7230 ISELFA Italy

7233 JOSLYN USA

7235 MOSDORFER GMBH Austria

7236 PFISTERER SWITZERLAND

7239 PREFORMED LINE PRODUCTS (PLP) USA

7240 SICAMEX France


Qualified For Hazardous Area Electrical Auxilliary Devices


9182 GOVAN Australia 1-Lighting & Fixtures: Model Type:Exe,Exd,Ex tD2-Junction & Fixures: Model Type:Exe,Exd,Exd,Ex tD3- Receptacles & Plugs :Model Type:Exd,Ex tD4- Fitting & Accessories: Model Type :Exe,Exd5- Alarm & Signaling auxiliary Devices: Model Type :Exde,Exd,Ex td6- Enclosures & Control auxilliary Devices: Model Type : Exde,Exd,Ex tD

Qualified For HEAT EXCHANGER: SHELL AND TUBE HEAT EXCHANGER; CARBON STEEL OR LOW ALLOY AND MAX. WALL THICKNESS OF 38 MM (1.5 IN.)


9869 BHI Korea


4878 MITSUI BABCOCK United Kingdom


KYUNGNAM, KR

4890 ABB ALSTOM POWER KASSEL, DE

4680 SANTAZ-CENSA S.A. PORRINO-PONTEVEDRA, ES


4920 GULF ENGINEERING CO. FOR HEAT EXCHANGERS

Saudi

4925 BRONSWERK HEAT TRANSFER B.V. NIJKERK-NL

4928 FBM - HUDSON ITALIANA SPA TERNO D'ISOLA, IT

4699 HITACHI ZOSEN Japan


KYOUNGKI-DO, KR

4720 KAWASAKI HEAVY IND., LTD. Japan

4968 BELLELI ENERGY SRL MANTOVA, IT

12 May, 2012 Page 58 of 181

4972 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE

4978 HUGHES-ANDERSON HEAT EXCHANGERS, IN

USA

4981 OHMSTEDE, INC. USA

4985 SHELL AND TUBE INCORPORATED USA

4998 MITSUBISHI HEAVY INDUSTRIES, LTD Japan

5000 AL-GASWA SUPPORT CO., LTD. Saudi

5001 R. E. ENGINEERING ASKAR, BM

5004 INDUSTRIE MECCANICHE DI BAGNOLO Italy

5006 HITACHI, LTD. KASADO WORKS Japan

5007 HYUNDAI HEAVY INDUSTRIES CO,LTD ULSAN KYUNGNAM, KR


5010 NANKAI CHEMICAL ENGNEERING CO., LTD.

Japan

4789 OLMI SVISIO, IT

4798 LARSEN AND TOUBRO LIMITED India

4813 STAHL-UND APPARATEBAU HANS LEFFER G

SAARBRUEZKEN- DVOWEILER, DE

4618 OLYAN DESCON ENGINEERING COMPANY

Saudi

Qualified For HEAT EXCHANGER: SURFACE STEAM CONDENSER SYSTEM: COMPLETE WITH EJE



9865 BHI Korea

4834 TECHNOTHERM CORPORATION USA

Qualified For HEAT EXCHANGERS: AIR COOLED HEAT EXCHANGERS



12 May, 2012 Page 59 of 181

10074 Daekjung Machinery & Engineering Co, Ltd (DKME)

Korea •Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.


10094 ZAMIL STEEL INDUSTRIES PED Saudi

10025 GEA EGI Contracting Hungary

9861 BHI Korea

9715 Zamil Hudson Saudi

10026 ECODYNE USA

8962 Jord International PTY Ltd. Korea




Saudi

4922 BATIGNOLLES TECHNOLOGIES THERMIQUES

NANTES, FR

4924 BRONSWERK HEAT TRANSFER B.V. NIJKERK, NL

4927 FBM - HUDSON ITALIANA SPA TERNO DISOLA, IT

4930 GEA LUFTKUEHLER HERNE, DE

4931 GEA RAINEY CORP. USA

4932 HUDSON PRODUCTS CORPORATION USA


KYOUNGKI-DO, KR

4937 SASAKURA ENGINEERING CO., LTD. Japan



4787 OLMI SUISIO, IT


Saudi

Qualified For HEAT EXCHANGERS: ELECTRICAL HEAT EXCHANGERS


12 May, 2012 Page 60 of 181

4956 ELTRON CHROMALOX United Kingdom

4957 WELLMAN THERMAL SYSTEMS USA

4716 KAWASAKI HEAVY IND., LTD. USA

Qualified For HEAT EXCHANGERS: MULTI-PIPE HEAT EXCHANGERS


8680 KT heavy Industries Co. Ltd. Korea 1-Manufacturng in Korea2-KT Heavy Industries to Provide Extended Warrantee to 5 Years Surface Area (EFF./SHEL ) up to 570 m2


4829 BURGESS-MANNING INC./NITRAM ENERGY

USA


KYUNGYAM, KR


Saudi

4940 BROWN FINTUBE FRANCE SA THONON-LT3-BAINS, FR

4942 BROWN FINTUBE COMPANY USA

4943 JAPAN STEEL WORKS, LTD. Japan

4947 SUNGJIN GEOTEC CO., LTD. ULSAN CITY, KR



Qualified For HEAT EXCHANGERS: PLATE TYPE HEAT EXCHANGERS



4950 ALFA-LAVAL THERMAL AB Maarssen, NL

4951 LINDE A.G. PROCESS ENG. & CONTRACTING

TECHTERTING, DE

4952 ALFA-LAVAL THERMAL, INC. USA

4953 TRANTER INC./TEXAS DIV/DOVER DIVERS

USA

4954 HISAKA WORKS, LTD. Japan

4955 MITSUBISHI HEAVY INDUSTRIES, LTD.GRAHAM APV

Japan

Qualified For HEAT EXCHANGERS: SHELL-AND-TUBE HEAT EXCHANGER: SHELL AND TUBE TYPE; ALL MAT'L OTHER THAN CARBON STEEL & LOW ALLOY, OR WALL THK GREATER THAN 38 MM (1.5 IN)


9864 BHI Korea


12 May, 2012 Page 61 of 181

4872 BELLELI SAUDI HEAVY IND., LIMITED Saudi



KYUNGNAM, KR




Saudi

4926 BRONSWERK HEAT TRANSFER B.V. NIJKERK, NL

4929 FBM - HUDSON ITALIANA SPA TERND D'ISOLA, IT




Korea



4973 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE, IT



4988 HITACHI KASADO JYUKOGYO Japan

5005 INDUSTRIE MECCANICHE DI BAGNOLO Italy

4739 SUMITOMO HEAVY INDUSTRIES, LTD. Japan



Japan

5012 LARSEN AND TOUBRO, LIMITED India

5013 ISHIKAWAJIMA-HSRIMA HEAVY INDUSTRIES CO.

Japan

5014 KOBE STEEL LIMITED Japan


4790 OLMI SVISIO, IT


SAARBRUEZKEN- DVOWEILER, DE

Qualified For HEAT EXCHANGERS: TUBE BUNDLE


9863 BHI Korea

12 May, 2012 Page 62 of 181




Saudi

4923 BATIGNOLLES TECHNOLOGIES THERMIQUES

NANTES, FR




4941 BROWN FINTUBE FRANCE SA THONAN-LES-BAINS, FR



ULSANKYVNGNAM, KR




4970 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE, IT

4974 UNIT SUPERHEATER ENGINEERING, LTD.

United Kingdom


USA



4987 HITACHI KASADO JYUKOGYO Japan

4989 MITSUBISHI HEAVY INDUSTRIES,LTD Japan




4788 OLMI SUISO, IT

Qualified For HEAVY STEEL STRUCTURES FOR ST HALL, PIPE RACKS, ELECTRICAL AND CONTR


9813 Albawardi Steel Industries Saudi for Pipe racks and pipe s;eepers, Process equipment service platforms,Production platform structure,Conveyor structures,Structural steel buildings,Stair stringers,Caged ladders Truss members,Monorail beam,Fabricated greetings,Compression and bearing plates.

12 May, 2012 Page 63 of 181

9802 Mabani Steel L.L.C UAE For:-Gas Turbine Building Structure-Substation Structures

8943 ALFANAR STEEL Saudi For:- Gas Turbine Building Structure- Substation Structures



8055 ZAMIL STEEL BUILDINGS Saudi


Qualified For HFO/CO Booster pumps


8193 Ebara Japan

8188 SULZER PUMPS United Kingdom/USA

8192 PATTERSON USA

8189 Flowserve Germany


8191 VIKING USA

Qualified For HP & LP HEATERS


10076 DKT Co.Ltd Korea •All Engineering and Design work must be reviewed and approved by SEC's accepted OEM•Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.



Korea •Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

12 May, 2012 Page 64 of 181

9705 ZAMIL STEEL INDUSTRIES PED Saudi For HRSG applications for combined cycle

9866 BHI Korea


4996 ALSTOM (ABB TECHNOLOGY) Hungary

4997 MITSUBISHI HEAVY INDUSTRIES, LTD Japan

4999 BALKEDURR Germany

Qualified For HP/ IP PIPES & SUPPORTS



5284 TECHNIP Germany

5285 LISEGA (IP/LP SUPPORTS ONLY) Germany

5286 NORDON France

5287 VALLOUREC -MANNESMANN Germany

Qualified For HP/LP BYPASS VALVES STATION


10146 Nihon Koso Co. Japan

5126 BOPP & REUTHER Germany

5127 CCI USA, Switzerland, Sweden, Austria

5129 TYCO/SEMPELL Germany

5130 VANATOME France

Qualified For HRSG DUCT BURNERS


5146 COEN na

5147 FORNEY na

5148 JOHN ZINK na

Qualified For HRSG FABRICATION SHOPS


12 May, 2012 Page 65 of 181

8926 Yantai Hyundai heavey Industreis China - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

8927 Hyundai Heavey Industries Co. Ltd. (HHI) Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS


Vietnam - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

8656 SUNGJIN GEOTEC COMPANY, LTD. Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

12 May, 2012 Page 66 of 181


Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS- All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

9889 DKT Co.Ltd Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS- All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

9172 S&T Corporation Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS- All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

8741 BHI Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM- Components to be fabricated following ASME procedures and shall bear ASME stamp.- All alloy steel materials shall be sourced only from West Europe, USA or Japan. - Carbon steel material shall be sourced only from SEC approved vendor list.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS

8685 SEDAE ENERTECH Korea - All Engineering and Design work must be reviewed and approved by SEC's accepted OEM-Components to be fabricated following ASME procedures and shall bear ASME stamp.- All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS- All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

12 May, 2012 Page 67 of 181

Qualified For HRSG MANUFACTURERS


10155 Ansaldo Caldaie S.p.A Italy For:1- Horizontal HRSG 2- Vertical HRSG : Only Assisted Circulation

8684 NEM Netherlands

10059 IHI Japan

8683 STF SPA Italy Italy Horizontal HRSG only

8644 CMI Belgium


Japan


Spain


Korea

10061 ALSTOM Germany

5143 DELTAK CORPORATION USA

5144 NOOTER/ERIKSEN USA

5145 Vogt Power International Inc. USA

Qualified For HVAC


9065 SKM Air Conditioning UAE Chillers up to 470 TonPackage Unit up to 146 TonSplit Units 145 TonsAll main equipment (compressor) shall be from USA,West Europe or Japan.

6351 TRANE (MAIN EQUIPMENT) Saudi

6352 YORK (MAIN EQUIPMENT) Saudi

6353 CARRIER (MAIN EQUIPMENT) Saudi

6354 JAMED (TURNKEY SUPPLIER) Saudi

6355 AL-ZAMIL Saudi

Qualified For HYDROGEN GAS MEASURING RACK


7553 E-ONE USA

Qualified For HYDROGEN GENERATION AND STORAGE


9416 Daiki Ataka Engineering Co., Ltd Japan Model No./Capacity (Nm3/h) HS0810 / 10 HS0830 / 30 HS0860 / 60

12 May, 2012 Page 68 of 181

8912 Proton Energy Systems USA H & C Series hydrogen generators

6467 ELECTROLYZE Canada

6468 TELEDYNE USA

Qualified For HYDROGEN SULFIDE MONITORS; GAS


7915 GENERAL MONITORS INC USA

7917 DETCON INCORPORATED USA

Qualified For I/P CONVERTER


6519 ABB Japan

7545 YOKOGAWA Japan

Qualified For INDICATORS - MULTI-POINT, THERMOCOUPLE


7642 YAMATAKE Japan


7864 THERMO ELECTRIC CO., INC USA



United Kingdom

Qualified For INDUSTRIAL BOILERS: FIRE TUBE BOILER AND COMPONENTS




4873 WELLMAN ROBEY, LTD. United Kingdom

4875 MITSUI BABCOCK RENFREW


KYUNGYAM, KR

4887 MITSUI SHIPBUILDING Japan


4742 AALBORG CISERV INTERNATIONAL A/S

Germany

Qualified For INDUSTRIAL BOILERS: PORTABLE AND MOBILE BOILERS



Qualified For INDUSTRIAL BOILERS: WATER TUBE BOILER


12 May, 2012 Page 69 of 181



4874 WELLMAN ROBEY, LTD. United Kingdom

4876 MITSUI BABCOCK RENFREW

4888 MITSUI SHIPBUILDING Japan

4889 ABB ALSTOM POWER KASSEL, DE

4891 STORK ENERGY HENGELO, NL

4892 CERREY, S.A. DE C.V. MON TEXRENY, MX


KYUNGYAM, KR



Germany


Qualified For Industrial Telephne/paging & accissories


9325 Guardian Telecom Inc. Canada 1-Industrial Telephones with Components & accessoriesModel Series: DT, WR, WT, SC, AC, HDE2-Hazardous Area Telephones & Ringers with Components & accessoriesModel Series: EXT, DT-Z, WR-H, WT-H, SC-H, CE, SR3-Page/ Talk system with Components & accessories Model Series: EXP, EXP-TBA, PT, PS,PP, MICAB/MICON, PTTI, PSCU4-Acoustic Booths , Model Series: AB-100, AB-10005-Speakers, Ringers, Beacons, Siren & HornsModel Series: MEDC, DNH, FS6-Telecom Cables,Model Series: POO5, POO6

Qualified For INSTRUMENT FITTINGS


8326 HY-LOK Korea

7538 SWAGELOK, CO. - PREFERRED USA

7540 WHITIEY CO. USA

7541 HOKE, INC USA

Qualified For INSTRUMENT RACK/GENERATOR


12 May, 2012 Page 70 of 181

7551 E-ONE USA

Qualified For INSTRUMENT WIRE AND CABLE


6961 KERPENWERK GMBH AND CO STOLBERG,DE

6962 MIDDLE EAST SPECIALIZED CABLE (MESC)

RIYADH,SA

6963 THERMO ELECTRIC WIRE AND CABLE LLC

USA

6964 BELDEN WIRE & CABLE RICHMOND,US

6965 BELDEN (CANADA) INC. Canada

6966 DEKORON WIRE AND CABLE MOUNT PLEASANT,US

6967 THE OKONITE COMPANY USA

6968 OKAZAKI MANUFACTURING Japan

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: COMPUTERS (FLOW)


7579 DANIEL (EMERSON) USA

7581 OMNI USA

7582 FISHER (EMERSON) USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: CONDUCTIVITY


7546 YOKOGAWA Japan

7563 DKK, ROSEMOUNT (EMERSON) USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: CONTROLLERS, FIELD MOUNT


7544 MASONELIAN (DRESSER) USA


Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: FLAME SUPERVISORY SYSTEM


7588 FIREYE (UTC) USA

7589 FORNEY (UTC) USA


7593 ALLEN BRADLEY (ROCKWELL AUTOMATION)

USA

7595 IRIS (E) CANADA / USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: INDICATORS MANOMETERS


12 May, 2012 Page 71 of 181

7596 DWYER – PREFERRED USA

7597 MERIAM (BERKSHIRE HATHAWAY) USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: INDICATORS PRESS / RECEIVE


7598 ASHCROFT – PREFERRED (EXCEPT IN THE CASE OF PRE-PACKAGED EQUIPMENT)

USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: OXYGEN


7547 YOKOGAWA Japan


7568 ORBISPHERE Switzerland

7569 HACH USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: PH PROBE


7548 YOKOGAWA Japan


Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: SILICA



7570 HACH USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: SODIUM


8303 Thermo Orion/THERMO-SCIENTIFIC USA


7571 ORION – (THERMO FISHER SCIENTIFIC)

USA

Qualified For INSTRUMENTATION ANALYTICAL MEASUREMENTS: VIBRATION MONITORING SYST


9952 SKF CONDITION MONITORING, USA

7572 BENTLY-NEVADA CORPORATION USA

7573 DLI/ AL-BUSAILI, RIYADH, SAUDI ARABIA

Saudi

7574 CSI/ ENGINEERING EQUIPMENT ESTABLISHMENT (EEE)

Saudi

Qualified For Instrumentation Cable.


10038 TEKAB Co. Ltd UAE Without metallic sheath. 11-TMSS-11 specification.

12 May, 2012 Page 72 of 181

Qualified For INSULATED CONDUCTOR: XLPE CABLE –13.8 KV







7012 DUBAI CABLE CO. UAE

Qualified For INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES



7462 ATOFINA CHEMICALS USA

7463 DIELECTRIC SYSTEM INC. USA

7464 FURAKAWA CABLES Japan

7465 INDOPOL LAVERA / FRANCE

Qualified For Insulation and cladding


9468 Binzagr Factory for Insulation Materials Co.Ltd

Saudi, Dammam

Qualified For Intake Strainers



6446 SADC (SAUDI ARABIAN DEVELOPMENT CORPORATION)

Saudi

Qualified For IP & LP HEATERS


8947 Daechang HRSG Corporation Korea •All Engineering and Design work must be reviewed and approved by SEC's accepted OEM•All sizes and wall thickness up to 110 mm•Components to be fabricated following ASME procedures and shall bear ASME stamp.•All sourced materials shall be as per ASME, ASTM, DIN, BS or JIS•All materials above grade 22 shall be sourced only from West Europe, USA or Japan.

Qualified For IP/LP - PIPES



12 May, 2012 Page 73 of 181

5288 THYSSEN – MM Germany

5289 SHAHIG Saudi


5291 SAUDI ARABIAN AMIANTIT Saudi

Qualified For IP/LP – VALVES FOR BOP


9394 HY-LOK Korea SS relief valves size up to 1”


Qualified For ISOLATED PHASE BUS DUCT


9042 HITACHI Country of origin is subject to SEC approval

9041 GE Canada None

9327 EGE Ltd. Czech Republic / Slovakia

Up to 20KA for 36KV at 50°C

9326 Alfa Standard Italy Up to 20KA for 36KV at 50°C

9040 DELTA-UNIBUS USA Country of origin is subject to SEC approval

9043 ALSTOM France None


9197 Simelectro France Model Powerduct IPB Series

8854 ABB None

9245 Elektrobudowa Poland Model Type ELPE with 5 years warranty.

8855 AZZ / CALVERT USA None

8856 DELTA-UNIBUS USA None

8857 GE Canada None

8858 HITACHI None

9038 ABB Country of origin is subject to SEC approval

Qualified For JUNCTION BOXES – ELECTRICAL


9066 Rose Systemtechnik GmbH Germany

7495 CROUSE HINDS CO. USA

7496 HAWA ELECTRIC PANEL Saudi

7497 HOFFMAN USA

7498 HUBBELL WIEGMANN USA

12 May, 2012 Page 74 of 181

7499 REMAL FACTORY Saudi

7500 RITTAL HERBORN

7501 WEIDMULLER United Kingdom

Qualified For JUNCTION BOXES – PNEUMATIC


7502 BEBCO INDUSTRIES na

7503 SITEK na

Qualified For KILOWATT HOUR METER (ENERGY METER)



7451 ELSTER USA

7452 GEC MEASUREMENT United Kingdom

Qualified For KITCHEN FURNITURE & EQUIPMENT


8222 IKEA (Ghassan Ahmed Al Sulaiman) Saudi

8221 Gulf Wagar Saudi

8070 IKEA Saudi

Qualified For LANDSCAPING AND IRRIGATION


8086 RABYA TRADING AND AGRICULITURE Saudi

Qualified For LARGE SCREEN DISPLAY


6725 TOSHIBA Japan

8038 SONY Japan

8039 PANASONIC Japan

8040 BARCO Japan

Qualified For LEVEL GAUGE GLASSES


6367 CLARK-RELIANCE-JERGUSON GAGE AND VALVE CO

USA

7806 SIMCO ENGINEERS LTD United Kingdom

7807 PENBERTHY/TYCO FLOW CONTROL USA

7808 CESARE BONETTI SPA Milano, It

7810 K-TEK CORP USA

Qualified For LEVEL GUAGE- MAGNETIC TYPE


12 May, 2012 Page 75 of 181

7809 CESARE BONETTI SPA Italy

7812 K-TEK CORP USA

Qualified For LEVEL INSTRUMENTS – CAPACITANCE OR RF ADDMITTANCE


7613 ENDRESS & HAUSER INC. USA

7816 MAGNETROL INTERNATIONAL INC. USA

7825 DREXELBROOK ENGINEERING HORSHAM,US

7827 ENDRESS AND HAUSER Germany

Qualified For LEVEL INSTRUMENTS - NUCLEAR RADIATION




7829 THERMO MEASURETECH (TEXAS NUCLEAR)

USA

7830 OHMART/VEGA CORP USA

Qualified For LEVEL INSTRUMENTS - ULTRASONIC




7820 SOLARTRON MOBREY LTD United Kingdom

7824 DREXELBROOK ENGINEERING USA


Qualified For LEVEL MEASUREMENT: CAPACITANCE, ETC.




7603 DREXELBROOK (AMETEK) USA

Qualified For LEVEL MEASUREMENT: CUSTODY TRANSFER/RADAR/DISPLACEMENT



7606 ENRAF BV Netherlands

7607 SAAB (ROSEMOUNT) Sweden / USA

7608 AMETEK USA

Qualified For LEVEL MEASUREMENT: DISPLACEMENT


12 May, 2012 Page 76 of 181



Qualified For LEVEL MEASUREMENT: MAGNETIC FLOW


7622 ROSEMOUNT (EMERSON) – PREFERRED

USA

Qualified For LEVEL MEASUREMENT: PRESSURE


7549 YOKOGAWA Japan


7623 ROSEMOUNT (EMERSON) – PREFERRED

USA


Qualified For LEVEL MEASUREMENT: PROCESS RADAR



7604 OHMART-VEGA USA

Qualified For LEVEL MEASUREMENT: RADIOACTIVE


7605 OHMART-VEGA USA

7609 KAY-RAY (THERMO FISHER SCIENTIFIC)

USA

7610 TEXAS NUCLEAR (ROSEMOUNT) USA

Qualified For LEVEL MEASUREMENT: TARGET METER



7635 HERSEY MEASUREMENT USA

Qualified For LEVEL MEASUREMENT: TDR


7617 MAGNETROL Belgium

7621 ROSEMOUNT – PREFERRED USA

Qualified For LEVEL MEASUREMENT: TEMPERATURE


7550 YOKOGAWA Japan



7636 MOORE INDUSTRIES USA

12 May, 2012 Page 77 of 181

7637 FISHER-ROSEMOUNT – PREFERRED USA

Qualified For LEVEL MEASUREMENT: TURBINE


7580 DANIEL (EMERSON) USA


Qualified For LEVEL MEASUREMENT: ULTRASONIC


7611 ENDREES & HAUSER INC. Germany

7615 KISTLER MORSE USA


7620 MILLITRONICS USA

Qualified For LEVEL SWITCHES - FLOAT AND DISPLACER TYPE


7667 SOR, INC USA

7811 K-TEK CORP USA



Qualified For LIGHT AND MEDIUM STEEL STRUCTURES


8358 AL BABTAIN Saudi Only for Buildings


9051 Aasia Steel Factory Co Ltd Saudi Structural and miscellaneous steel,process skids, and pipe spooling internal alloy cladding.

9226 Al Zamil Metal Works Factory Saudi,Jeddah Storage Tanks including coating and replacement of slall size and up to 50,000m3 as rebuilt; associated pipe,linings,connections for fuel oil,distillate oil,crude oil,gas,chemicals,and water,and structural steel assemblies for support of pipe and conveyance equipment.


8171 Saudi Condreco Ltd. Saudi


8167 SHAMRANY INDUSTRIAL GROUP/BOURNE

Saudi

8169 GEYAD FOR COMMERCE & IMPORT CO. LTD.

Saudi

8164 Al Zamil Heavy Ind. Saudi

12 May, 2012 Page 78 of 181

9369 Kirby Building Systems Kuwait Only for Buildings and warehouses except power block and turbine halls


8168 INT'L BUILDING SYSTEM Factory (IBSF) Saudi

9860 EUROTECH ENGINEERING INTERNATIONAL CO., LTD.

Thailand AS fabrication shop only




8059 SAUDI CONDRECO LTD Saudi

Qualified For LIGHTNING PROTECTION


8185 WALLIS United Kingdom

8187 FURSE United Kingdom

8186 SEICO Saudi

7261 WALLIS United Kingdom

7262 SEICO Saudi


Qualified For LINE TRAP



Qualified For LINE TUNER



Qualified For LINK BOX FOR U/G POWER


6497 ABB SWEDEN



7097 NEXANS France



7141 AARTCO Saudi

7142 AL SHAHRANI EST. Saudi


12 May, 2012 Page 79 of 181

7147 HAYCOLEC SWITCHGEAR PTY Australia

7149 STEINER Germany

Qualified For LIQUID METER PROVERS; METER; PROVER; BI-DIRECTIONAL C/W ACCESSORIES


6443 FMC USA


7692 ALDERLEY SYSTEMS LTD United Kingdom

7694 ALDERLEY FZE UAE


Qualified For LIVE TANK, 110 – 132KV, 230KV & 23KV SF6 BREAKER


6505 ABB SWEDEN

6614 AREVA France


Qualified For LIVE TANK, 69 KV SF6 BREAKER


6504 ABB SWEDEN

6613 AREVA France


7343 ABB SWITCHGEAR AB SWEDEN, LUDUVIKA

Qualified For LOAD BREAK SWITCHES UPTO 34.5 KV


6597 ABB/AEIL Saudi

6615 AREVA France

6648 KONCAR CROATIA


6709 EPS LTD. Saudi

7165 HITACHI Japan

7346 FRITZ DRIESCHER Germany

Qualified For LONG ROD PORCELAIN INSULATORS UP TO 380 KV



7198 PPC INSULATORS Germany

7207 LAPP Germany

12 May, 2012 Page 80 of 181

7210 NGK Japan

Qualified For LOW METER: VENTURI TUBE



7679 SOLARTRON ISA United Kingdom

7681 TECNOMATIC SPA Italy


USA


Qualified For LPOF CABLE –110 KV TO 132 KV


6495 ABB Germany



Japan






7090 FUJIKURA Japan

7103 PIRELLI Italy

7114 ALCATEL CABLE France


7119 DATWYLER United Kingdom


7124 KABEL WERK BRUGG AG SWITZERLAND


7132 NEXAN (CORTALLIOD) SWITZERLAND

Qualified For LPOF CABLE –230 KV


6496 ABB Germany



Japan


12 May, 2012 Page 81 of 181

7054 ALCATEL France




7091 FUJIKURA Japan



Qualified For LPOF CABLE –380 KV





Japan



7055 ALCATEL France



7092 FUJIKURA Japan

7104 PIRELLI Italy






7137 PIRELLI GENERAL United Kingdom

7139 STANDARD TELEFON OG KABELFABRIK A/S

S / NORWAY

Qualified For LUBE OIL SYSTEM


5029 ROTAN Germany

5216 BOLL & KIRCH Germany

5217 OLTECHNIK Germany

Qualified For MAIN & SECONDARY SEAWATER COOLING WATER PIPES (EXCEPT SEAWATER PRE


12 May, 2012 Page 82 of 181



5141 AL-ZAMIL METAL WORKS Saudi

5142 AMIANTIT FIBERGLASS INDUSTRIES LIMITED

Saudi

Qualified For MAIN AND SECONDARY CW VALVES



5116 KSB AMRI Germany

5117 SAPAG INDUSTRIAL VALVES France

5118 ORTON Italy

Qualified For MAIN OIL COOLER


5017 SOUTHERN HEAT EXCHANGER USA

5019 ITT INDUSTRIES USA

5023 HERING Germany

5036 TRANTER PHE (E) USA

5037 GEA ECOFLEX (E) USA

5038 ALFA LAVAL USA

Qualified For MAIN SEAWATER CIRCULATING WATER PUMPS


10050 Hitachi Japan

9160 Hyosung GoodSprings, Inc.(HGS) Korea Manufactured in KoreaModels (VMF 1650-1490,2000-1750 & VMF 2200-1620)Flow up to ;35,000 m3/h


5087 SULZER PUMPS NA

5091 FLOWSERVE Spain/Italy

5097 EBARA Japan


Qualified For Measuring devices sensoers (Orifice,Ventura Tubes,Flow Nozzle,Gas Detectors)


9476 Seiko Flowcontrol Ges.m.b.H. AUSTRIA Only for:1- Orifice Plate2- Flow nozzle3- Venturi inclusive accessories

12 May, 2012 Page 83 of 181

9165 WISE Control Inc. Korea

Qualified For Mechanical Works on BOP


9515 Sejong Saudi Arabia LLC. Korea - Mechanical work:General Mechanical Works.

Qualified For METAL CLAD SWITCHGEAR, INDOOR, LOW-VOLTAGE


8989 ARABIA ELECTRIC Saudi (Under License from Siemens)

8988 ABB ELECTRICAL IND. CO., LTD. (AEIL)

Saudi ABB K-Line (Under License from ABB) , Siemens Type R/RL

9154 HYUNDAI HEAVY INDUSTRIES CO.Ltd Korea

8998 WESCOSA Saudi Type DSII (Under License to Cutler-Hammer)

8987 ABB POWER T & D COMPANY USA K-Line

8990 ARABIAN POINT EIGHT POWER Saudi Based upon Cutler-Hammer DSII breaker assembly

8991 CUTLER-HAMMER, INC. USA Type DSII

8992 ELECTRICAL POWER DISTRIBUTION BOARDS & SWITCHGEAR (EPS)

Saudi Square D Class 6035 (Under License from Square D)

8993 GENERAL ELECTRIC USA Type AKD

8995 POINT EIGHT POWER USA Cutler-Hammer DSII breaker assembly

8996 SIEMENS ENERGY AND AUTOMATION

USA Type R/RL

8997 SQUARE D USA Class 6035 Cutler-Hammer

Qualified For METAL CLAD SWITCHGEARS: 13.8 kV UP TO 34.5 kV


8756 AEL -SIEMENS Germany

8757 AREVA Germany


8754 ABB/AEIL Germany

8999 WESCOSA Saudi

8758 EPS (GROUPE SCHNEIDER) Saudi


8760 S & C USA

8761 SIEMENS USA


8755 ABB-CALOR EMAG Germany

8763 VA TECH France

12 May, 2012 Page 84 of 181

Qualified For METAL-CLAD SWITCHGEAR, INDOOR – 1 TO 13.8 kV



Saudi Square D Class 6055/VAD-3 Under License from Square D/Merlin Gerlin


Korea HMS type, Up to 13.8 KV with rated current up to 3150A @50 C Ambient

8776 SQUARE D / GROUPE SCHNIEDER USA Class 6055/VAD-3

8774 GENERAL ELECTRIC USA Type PowerVac

8772 CUTLER-HAMMER USA Vac-Clad W

8771 ARABIA ELECTRIC, LTD. Saudi Siemens GM/GMI Type Under License from Siemens)

8770 ABB ELECTRICAL IND. CO., LTD. (AEIL) Saudi ABB Advancegear, ABB HKII Under License from ABB)

8768 ABB POWER T & D CO. USA Advancegear HKII

8775 SIEMENS POWER T&D USA GM/GMI Type

Qualified For METAL-CLAD SWITCHGEAR, INDOOR – 1 TO 38 kV


8986 POINT EIGHT POWER USA Point Vac C , Point Vac G

8985 ARABIAN POINT EIGHT POWER Saudi Point Vac C , Point Vac G from Square D

8984 WAHAH ELECTRIC SUPPLY CO. (WESCOSA)

Saudi Based on POWEL VAC

Qualified For METER RUNS; PREFABRICATED GAS METERING


6442 FMC USA



7691 ALDERLEY SYSTEMS LTD United Kingdom


7696 IMTECH SYSTEMS BV DEN BOSCH, NL

Qualified For METER; SMALL VOLUME PROVER





7721 CALIBRON SYSTEMS INCORPORATED USA

Qualified For MINERAL OIL FOR ELECTRICAL APPARATUS


7457 CHEMTRADE/MOBIL OIL CO. LTD. Saudi

12 May, 2012 Page 85 of 181

7458 NYNAS SWEDEN

7459 PETROLUBE Saudi

7460 SAVITA India

7461 SHELL France

Qualified For MISCELLANEOUS AUXILIARY PUMPS CENTRIFUGAL VERTICAL/HORIZONTAL INCLU


8950 KUBOTA Japan For:1-FGD Supplementary Seawater PumpModel No : DF-VFlow :47,310 m3/hrHead :16mMotor rating: 2,800kw2- Absorber Spray PumpModel No :DF-VFlow : 12,800 m3/hrHead : 21-31 mMotor rating :1,000-1,450 kw3-MSF Seawater Supply Pump :Model No :DF-VFlo

9919 ITT Goulds Pumps Co. LTD Korea Model series:31XX,34XX,36XX,37XX and 39XX

8662 Hyosung GoodSprings, Inc.(HGS) Korea Manufactured in Korea.Up to: flow 485.2 m3/h ,and head 87.3 m

9391 Hyundai Heavy Industries co., LTD. Korea Model VK, max flow 7000 m3/hr head 75 meter

8719 Saudi Pump Factory Saudi Models : VS1,VS6,OH2


5099 EBARA Japan

5124 KSB Germany



12 May, 2012 Page 86 of 181

5257 VERGANI / FINDER Italy

5258 GARBARINO Italy

5259 RUTCHIE (ONLY FOR HORIZONTAL) France, Swiss

5260 AURORA PUMPS na

5263 SULZER na


5265 LOWARA na

5267 GROUNDFOS na

Qualified For MISCELLANEOUS PUMPS FILTERS


5268 FILTREX Italy

5269 TECHNOS France

5271 TAPPROGE Germany

Qualified For MOBILE S/S, 110 - 132 /13.8KV


6518 ABB SWEDEN


7466 ABB/ADDA Italy

Qualified For MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS


7456 NEST OY/NAPS FINLAND

Qualified For MOISTURE ANALYZERS



7919 ALPHA MOISTURE SYSTEMS United Kingdom

7920 PANAMETRICS LIMITED SHANNON, IE

7921 PANAMETRICS USA

7922 SHAW MOISTURE METERS (UK) LTD. United Kingdom

7923 AMETEK CANADA INC Canada

Qualified For MONITOR SYSTEMS; TEMPERATURE




United Kingdom


12 May, 2012 Page 87 of 181

7967 ROCKWELL AUTOMATION-ENTEK (IRD)

USA

7968 SKF CONDITION MONITORING/VIBRO-METER,

USA

7969 VIBRO-METER S.A. Fribourg, CH

Qualified For MONITORING



7942 EPRO Germany

Qualified For MOTOR CONTROL CENTERS


8916 ABB Electrical Industries Co Ltd. Saudi, Riyadh - MCC(MNS Series).

9757 Nour Industries Saudi -Siemens Sivacon.- Ten (10) Years extended warranty.

9155 HYUNDAI HEAVY INDUSTRIES CO.Ltd Korea

6759 POWELL (ONLY IF PART OF PACKAGE) na

6760 ALLEN BRADLEY – PREFERRED FOR 480V MCC, 4160V MCC

na

6761 CUTLER-HAMMER – PREFERRED FOR 480V MCC, 4160V MCC

na

Qualified For MOTORS: UP TO 250 HP


6724 TOSHIBA USA

6731 TECO – WESTING HOUSE USA

6732 BARLDOR ELECTRIC MOTORS USA

6733 RELIANCE USA

6734 U.S ELECTRIC USA

6735 BROOK HANSEN (INVENSYS BROOK CROMPTON)

United Kingdom


5060 SIEMENS MORELIA (GUADALAJARA), MEXICO

Qualified For MULTIVARIABLE TRANSMITTERS


7759 EMERSON- ROSEMOUNT DIVISION Wessling, DE


Qualified For MV & LV CABLES


12 May, 2012 Page 88 of 181

8711 LEONI Switzerland 1.Model BETA flam &TRI-DELTA.2-Tow years full warranty (material & labor).3-Five years functional warranty with material replacment.

Qualified For MV cable


9845 Al-Fanar Electrical System Saudi MV Power Cables (36)kv):1-1X630mm2 (CU/XLPE/PVC)2-3X300mm2 (CU/XLPE/PVC)Extend ten (10) years Guarantee/Warranty.

Qualified For MV, LV C&I CABLES


6979 RIYADH CABLE Saudi


6983 MSEC (FOR I&C CABLES ONLY) Saudi

Qualified For MV/LV ELECTRICAL MOTORS FOR BOP


8970 TATUNG Electric Co Taiwan 1-LV Motors :Up to 200HP, 480V2- MV Motors : Up to 1000KW, 6.6 KV


Korea -Up to 7.5 MW-Model HRQ3 series & Model HRN3 series.-From Korea Factory Only

8632 SCHORCH Elektrische Machinen Germany 1-MV Motor:Up to 5 MWModel KA,KR & KW2-LV Motors:-Up to 200 KW-Model DA

8409 Hyosung Corporation Korea 1-Up to 5000KW ,13.8 KV2-Up to 9,000KW , 11KV

6742 TMAE (MV MOTORS) Japan

6743 SIEMENS (LV.MV MOTORS) Saudi

6744 ALSTOM (MV MOTORS) FRANCE, BELGIUM, United Kingdom

Qualified For MV/LV TRANSFORMERS UP TO 4 MVA


12 May, 2012 Page 89 of 181

8576 BEST TURKEY

8575 ABB TURKEY

8574 ALSTOM GRID TURKEY

8573 WESCOSA Saudi

6476 ABB Saudi


Korea

Qualified For NDT (NON-DESTRUCTIVE TESTING)


6463 COOPERHEAT SAUDI ARABIA Saudi

6465 AL-HOTI Saudi

Qualified For NEUTRAL EARTHING RESISTORS, UP TO 33 KV



6918 METAL DEPLOYE France

6919 NATIONAL India

6920 CRESSAL RESISTOR United Kingdom

Qualified For NON SEGREGATED MV BUS DUCT


9049 MGC MOSER-GLASER France None

9048 ETA (BETOBAR) FRANCE, BELGIUM

None

Qualified For NON SEGREGATED PHASE BUS DUCT



Up to 3.5KA for 17.5KV at 50°C

10132 Alfa Standard Italy Up to 3.5KA for 17.5KV at 50°C

9045 SQUARE D Country of origin is subject to SEC approval

8860 AZZ / CALVERT USA Country of origin is subject to SEC approval

9517 Simelectro France Model Transoduct NSPB Series LV

8861 SQUARE D Country of origin is subject to SEC approval

8862 DELTA-UNIBUS - PREFERRED USA Country of origin is subject to SEC approval

8863 POWELL - PREFERRED Country of origin is subject to SEC approval

9046 DELTA-UNIBUS - PREFERRED USA Country of origin is subject to SEC approval

12 May, 2012 Page 90 of 181

9047 POWELL - PREFERRED Country of origin is subject to SEC approval

Qualified For NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES




Saudi




7056 ALCATEL SWEDEN


7107 PIRELLI Italy

7153 ADC MEXICO

7154 ALCOA FUJIKURA LTD (AFL) United Kingdom

7156 B.V.TWENTSCHE KABELFABRIEK Netherlands, NAAKSBERGEN PLANT

7157 BICC United Kingdom


7160 CORNING CABLES United Kingdom

7161 ERICSON SWEDEN

7162 FUJIKURA LTD. Japan


7164 HITACHI Japan


7170 MIDDLE EAST OPTIC FIBER & CABLE MANUFACTURING CO. (MEFC)

Saudi

7171 NKF KABEL B.V. Netherlands

7172 NOKIA FINLAND

7173 OPTOKON Czech Republic

7174 PRYSMIAN TELECOM Spain

7176 RIYADH TELEPHONE CABLES CO. Saudi

7177 SUMITOMO Japan

Qualified For OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING



12 May, 2012 Page 91 of 181

7250 BP SOLAR ARABIA LTD Saudi

7251 DERVAUX France

7252 OBSTA France

7253 P&R TECHNOLOGIES USA

7254 PFISTERER SEFAG AG SWITZERLAND

7255 SHIN SEONG IND CORP. Korea

7256 TANA WIRE MARKER USA

Qualified For OHL COMPOSITE INSULATORS UP TO 230KV


7202 SEDIVER BRAZIL

7208 LAPP Germany

7212 FCI (FURUKAWA COMPOSITE INSULATORS LTD)

HUNGARY, BUDAPEST

7213 MACLEAN POWER SYSTEM USA

7214 NGK LOCKE INC. USA

7215 E.B.REBOSIO S.R.L Italy

Qualified For OHL COMPOSITE INSULATORS UP TO 380KV


7203 SEDIVER BRAZIL

7216 NGK LOCKE INC. USA

7217 PFISTERER SEFAG AG SWITZERLAND

Qualified For OHL GLASS INSULATOR UP TO 380KV


7201 SEDIVER ITALY/BRAZIL

Qualified For OHL PORCELAIN INSULATOR UP TO 380 KV



7200 SEDIVER France

7205 DIELVE Italy

7206 LAPP Germany

7209 NGK Japan

7211 SERAM TECH Germany

Qualified For OIL BURNERS


12 May, 2012 Page 92 of 181

10009 Babcock-Hitachi Dongfang Boiler Co.,Ltd China -As a fabrication shop only.-Material shall be as per ASTM/DIN/BS/JIS

6529 MHI Japan

6533 B & W USA

6534 HAMWORTHY COMBUSTION United Kingdom

6535 OILEM FINLAND

6536 M & S Germany

6537 PILLARD France

5072 ALSTOM France

Qualified For OIL CONDITIONER


5040 KAYDON USA

5041 TORE USA

Qualified For OIL MIST ELIMINATOR


5042 BURGESS-MIURA CO. (E) USA

5043 KOCH-OTTO YORK USA

Qualified For OIL WATER SEPARATORS


5212 ANDERSON na

5213 GREAT LAKES ENVIRONMENTAL na

5214 HIGHLAND TANK na

5215 PS INTERNATIONAL (E) na

Qualified For ORIFICE FITTINGS – RETRACTABLE, SINGLE AND DUAL CHAMBER




USA


Qualified For ORIFICE PLATES AND FLANGES


6278 DANIEL MEASUREMENT & CONTROL USA




12 May, 2012 Page 93 of 181


USA

7690 CRANE MANUFACTURING INC USA

Qualified For OTHER VESSEL / HEATERS / HEAT EXCHANGERS


4958 CAMPI Italy

Qualified For OXYGEN ANALYZERS




7883 GE/PANAMETRICS LTD Shannon, IE

7884 SERVOMEX UK LTD. United Kingdom




7899 TELEDYNE INSTRUMENTS USA

7900 SICK-MAIHAK AG Poppenbütteler bogen 9b, 22399 hamburg, de

7902 EMERSON PROCESS MANAGEMENT- FISHER ROSEMOUNT GMBH & CO.,

Industriestrasse 1, 63594 hasselroth, de

Qualified For PACKAGE SUBSTATION AND LV TRANSFORMERS


8180 Resistel for Transformer neutral grounding resistors

Saudi

8179 SIEMENS Saudi

8177 ABB Saudi

8178 SAUDI TRANSFORMERS Saudi

6484 ABB Saudi

6839 SAUDI TRANSFORMERS CO. Saudi

5063 SIEMENS Saudi

Qualified For PACKAGE UNIT INSTRUMENTATION; FOUNDATION FIELDBUS (FF) POWER SUPPLIE


8012 MTL/RELCOM INC. United Kingdom

8015 MTL/RELCOM INC Demmel, NL

8018 PEPPERL & FUCHS, Mannheim-Schonau, DE

12 May, 2012 Page 94 of 181

Qualified For PACKAGE UNIT INSTRUMENTATION; FOUNDATION FIELDBUS (FF) TERMINATORS




Qualified For PACKAGE UNIT INSTRUMENTATION; FOUNDATION FIELDBUS (FF) WIRING BLOCKS




8019 PEPPERL & FUCHS, Mannheim-Schonau, DE

8020 HAWKE United Kingdom

Qualified For PAD MOUNTED SF6/OIL SWITCH, 34.5 KV


7344 FRITZ DRIESHER KG Germany

Qualified For PANEL INSTRUMENTATION; CONTROLLERS AND INDICATORS – ANALOG


9395 HY-LOK Korea


7659 ABB AUTOMATION United Kingdom



7904 FOXBORO COMPANY(INVENSYS) USA

Qualified For PANEL: HYDRAULIC; SSV/ SSSV; SINGLE-WELL ONSHORE APPLICATIONS


7973 E PRODUCTION SOLUTIONS UAE

7976 COOPER CAMERON United Kingdom

7977 HALLIBURTON ENERGY SERVICES. USA

7978 BAKER OIL TOOLS USA

7980 CAMERON WILLIS USA

Qualified For PANEL: SSV/SSSV; HYD; SELF CONTAINED


7979 BAKER OIL TOOLS USA

7981 COOPER CAMERON SINGAPORE Singapore

7982 CAMERON FRANCE France

7983 BARBER Canada

12 May, 2012 Page 95 of 181

7984 STREAM FLO Canada

Qualified For PANELBOARD, LOW VOLTAGE, EXPLOSIONPROOF


9002 APPLETON USA None

9003 CROUSE HINDS / COOPER USA None

Qualified For PANELBOARD, LOW VOLTAGE, NON-EXPLOSIONPROOF



USA None

9001 WESCOSA Saudi (Under License from Cutler-Hammer)

8817 (EPS) Saudi (Under license from Square D/merlingerlin

8816 ELECTRICAL POWER DISTRIBUTION Square D Models

8815 SQUARE D/SCHNEIDER USA None

8811 GENERAL ELECTRIC USA None

8809 CROUSE HINDS / COOPER INDUSTRIES

USA None

8808 ARABIA ELECTRIC, LTD. Saudi Siemens models (Under License from Siemens)


8810 CUTLER-HAMMER USA None

Qualified For PH ANALYZERS







7911 HORIBA INSTRUMENTS USA


USA

Qualified For PILOT VALVES


6714 AUTOMATIC SWITCH CO. (ASCO) Scherpenzeel, NL

7533 VERSA VALVES USA

Qualified For PILOT WIRE CABLES & ACCESSORIES


12 May, 2012 Page 96 of 181




Saudi





7150 STEINER Germany

7178 DEMIRER KABLO TURKEY

7179 GOLDSTAR CABLE Korea

7180 KERPENWORK Germany

Qualified For PIPE FITTINGS ; BEND: PIPE; RETURN; ALLOY STEEL


5665 BENKAN KIRYU FACTORY Japan

5680 BENKAN CORPORATION Amagasaki-City

5789 BKL FITTINGS LTD. United Kingdom

5801 TECNOFORGE SPA Italy

5816 TECTUBI S.R.L. Italy

5822 TUBACEX TAYLOR ACCESORIOS Spain

5828 WESTFALENWERK GREBE K.G. Germany

5834 ALASKAN COPPER WORKS Seattle, Wa.

5839 TUBE FORGING OF AMERICA Portland, Or

5850 NIPPON BEND CO., LTD. Japan

5864 SUNG KWANG BEND CO., LTD. Korea

5882 TAE KWANG BEND INDUSTRIES CO., LTD.

Korea

5472 DYNAMIC PRODUCTS INCORPORATED Houston, Texas

5540 SPIE ENERTRANS France

5564 BASSI LUIGI Italy

5656 LADISH DIVISION/TRINITY INDUSTRIES Russelville, Ar

Qualified For PIPE FITTINGS ; BEND: PIPE; RETURN; CARBON STEEL




12 May, 2012 Page 97 of 181











Korea

5900 GELDBACH INDUSTRIE AG Germany

5902 TECHNOBEND Italy





Qualified For PIPE FITTINGS ; BEND: PIPE; RETURN; LOW TEMPERATURE CARBON STEEL



5682 BENKAN CORPORATION Japan











Korea

5903 TECHNOBEND Italy



12 May, 2012 Page 98 of 181



Qualified For PIPE FITTINGS ; BOSS: PIPE; WELDING BOSS; ANY METAL


5905 ETS DELCORTE LANGORACCORD Maubeuge, France

5911 I.M.L. (INDUSTRIA MECCANICA LIGURE) S.P.A.

Italy

5929 M.E.G.A., S.P.A. Italy

5941 SCHEEPSWERF EN MACHINEFABRIEK DE

Netherlands

Qualified For PIPE FITTINGS ; BRANCH: PIPE; ELBOW-LET, WELDOLET, THREDILET, SOCKLET, L



Italy



Netherlands

6076 WFI INTERNATIONAL INCORPORATED Houston, TX

6078 PENN MACHINE OF TEXAS/PENNSYLVANIA MACHINE

na

Qualified For PIPE FITTINGS ; BRANCH: PIPE; LATEORALET; ANY METAL; SPECIAL: INTEGRALLY



Italy



Netherlands


Qualified For PIPE FITTINGS ; BUSHING: PIPE; ANY METAL




Italy

5946 MIYOSHI IRON WORKS CO., LTD. Japan

Qualified For PIPE FITTINGS ; CAP: PIPE; BUTT WELD; CARBON STEEL






12 May, 2012 Page 99 of 181


Korea

5958 LINVIC ENG. LTD. United Kingdom

5975 WILHELM SCHULZ EXPORT GMBH Germany


5988 ALLOY PIPING PRODUCTS Shreveport, La

5993 STEEL FORGINGS, INCORPORATED Shreveport, La.

6004 W F I INTERNATIONAL INCORPORATED

Houston, TX

6010 W. GELDBACH GMBH & CO. KG. Germany

6028 RACCORDI FORGIATA Italy

6033 PIPELINE DEVELOPMENT\PLIDCO Westlake, Oh.

6034 CANADOIL FORGE LTD./LTEE Canada



5589 TAYLOR FORGE ENGINEERED SYSTEMS, INC.

Paola, Ks.


Qualified For PIPE FITTINGS ; CAP: PIPE; BUTT WELD; LOW TEMP STEEL









Korea







Paola, Ks.

Qualified For PIPE FITTINGS ; CAP: PIPE; BUTT WELD; STEEL ALLOY


12 May, 2012 Page 100 of 181






Korea



5983 RACCORDI FORGITTA Italy





Houston, TX




Paola, Ks.


Qualified For PIPE FITTINGS ; CAP: PIPE; SOCKET WELD OR THREADED; ALLOY; ANY SIZE



6038 ULMA FORJA Spain

6043 I.M.L. (INDUSTRIA MECCANICA LIGURE) S.P.A

Italy

6046 WFI INTERNATIONAL, INC Houston, TX

6050 IHARA SCIENCE CORPORATION Japan

Qualified For PIPE FITTINGS ; CAP: PIPE; SOCKET WELD OR THREADED; CARBON STEEL; ANY SI





Italy



6054 LINVIC ENG. LTD. Wolverhampton

6057 M.E.G.A. S.P.A Italy

12 May, 2012 Page 101 of 181

Qualified For PIPE FITTINGS ; CAP: PIPE; SOCKET WELD OR THREADED; CARBON; ANY SIZE





Italy



6053 LINVIC ENG. LTD. WOLVERHAMPTON

6056 M.E.G.A. S.P.A Italy

Qualified For PIPE FITTINGS ; COUPLING: PIPE; SOCKET WELD OR THREADED; ALLOY; ANY SIZE




Italy






6075 VOEST-ALPINE STAHLROHR Kindberg, Austria

Qualified For PIPE FITTINGS ; COUPLING: PIPE; SOCKET WELD OR THREADED; CARBON STEEL;




Italy




6061 WFI INTERNATIONAL, INC. Houston, TX


Qualified For PIPE FITTINGS ; CROSS: PIPE; ANY METAL, SIZE, AND CONNECTION


5838 ALASKAN COPPER WORKS Seattle, Washington

6002 STEEL FORGINGS, INCORPORATED Shreveport, Louisiana

12 May, 2012 Page 102 of 181


6291 TUBE FORGING OF AMERICA Portland, Oregon

Qualified For PIPE FITTINGS ; ELBOW: PIPE; BUTT WELD; ALLOY STEEL












Korea


5986 TECTUBI S.R.L. na

5995 STEEL FORGINGS, INCORPORATED. Shreveport, La.


6086 ERNE FITTINGS GMBH & CO Schlins, Austria

6092 ERNE FITTINGS GMBH Muerzzuschlag, Austria

6098 UHLIG ROHRBOGEN GMBH Germany

6101 THAI BENKAN COMPANY LIMITED. Papadeng, Thailand

5340 SUMITOMO METAL INDUSTRIES, LTD. Japan




Qualified For PIPE FITTINGS ; ELBOW: PIPE; BUTT WELD; CARBON STEEL







12 May, 2012 Page 103 of 181






Korea

5904 TECHNOBEND Areno







6103 INTERFIT na

6106 TECCTUBI SRL Podenzano

6107 SHAW ALLOY PIPING Shreveport, Texas

6110 LADISH DIVISION/ TRINITY INDUSTRIES

Russelville, Ar






Qualified For PIPE FITTINGS ; ELBOW: PIPE; BUTT WELD; LOW TEMP STEEL











12 May, 2012 Page 104 of 181


Korea




6088 ERNE FITTINGS GMBH & CO Schlins , Austria



6102 THAI BENKAN COMPANY LIMITED Papadeng, Thailand

6104 INTERFIT Maubeuge, France

6112 TECHTUBI na

6114 CUSTOM ALLOY CORP. Hi Bridge, NJ





Qualified For PIPE FITTINGS ; ELBOW: PIPE; SOCKET WELD OR THREADED; ALLOY




Korea


Italy





na

6115 ULMA FORJA S. COOP. Spain


6129 DYNAMIC PRODUCTS INCORPORATED Houston, TX

Qualified For PIPE FITTINGS ; ELBOW: PIPE; SOCKET WELD OR THREADED; CARBON STEEL




Korea

12 May, 2012 Page 105 of 181


Italy





USA




6138 ETS DELCORTE SA FORGED STEEL Maubeuge, France

Qualified For PIPE FITTINGS ; ELBOW: PIPE; SOCKET WELD; LOW TEMP. STEEL




Korea


Italy





Qualified For PIPE FITTINGS ; FITTINGS: PIPE; CARBON STEEL; CEMENT LINED



6238 INMA STEEL FABRICATOR CO., LIMITED

Saudi

6287 ABDULLAH AL-HAMOUD AL-SHUWAYER HEAVY METAL INDUSTRIES

Saudi

6288 MOHAMMAD AL-MOJIL GROUP STEEL FACTORY

Saudi

6289 CEMENT LINING COMPANY INCORPORATED

Houston, TX

4602 GEYAD FACTORY FOR PRESSURE VESSELS AND STEEL STRUCTURES

Saudi

5345 AMERON SAUDI ARABIA LIMITED Saudi

Qualified For PIPE FITTINGS ; FLANGE: PIPE; ASSEMBLY: SWIVEL RING; CARBON STEEL


5707 BRUECK GMBH Germany

12 May, 2012 Page 106 of 181

5725 N. GALPERTI AND FIGLIO Italy

5737 OFFICINE A. MELESI AND CO. Italy

5764 KOREA FLANGES CO., LTD. Korea

5779 N.K. FORGE CO., LTD. Japan

6055 LINVIC ENG. LTD. Wolverhampton

6151 FORGEROSSI S.A.S. Italy

6160 COFFER CORP./FLANGE DIVISION Houston, TX

Qualified For PIPE FITTINGS ; FLANGE: PIPE; BLIND FLANGE; CARBON STEEL





5748 RING MILL SPA Italy

5754 MCINNES ROLLED RINGS Millington, Tn.







6169 B.D. PROFILES LTD. United Kingdom

6175 ULMA FORJA, S. COOP. Spain

6186 METALFAR PRODOTTI INDUSTRIALI SPA

Italy

6198 RINGROLLERS / DIVISION OF DORBYL LTD.

Srings, S. Africa

6210 NATIONAL FLANGE AND FITTING CO. Houston, TX

6218 TEXAS METAL WORKS INCORPORATED

USA

6221 WELDFIT CORPORATION Houston, TX

Qualified For PIPE FITTINGS ; FLANGE: PIPE; BLIND FLANGE; LOW TEMP STEEL






12 May, 2012 Page 107 of 181










Italy


Srings, S. Africa


Qualified For PIPE FITTINGS ; FLANGE: PIPE; BLIND; ALLOY STEEL




Srings, S. Africa


6225 OFFICINE A. MELESI AND CO Italy

6226 NF & FC Houston, TX


USA

Qualified For PIPE FITTINGS ; FLANGE: PIPE; CLAMP; COMPLETE ASSEMBLY; WITH HUBS; SEAL


6286 VECTOR INTERNATIONAL LTD. United Kingdom

6290 GALPERTI ENGINEERING & FLOW CONTROL SRL

Italy

Qualified For PIPE FITTINGS ; FLANGE: PIPE; LAP-JOINT; ANY STEEL









12 May, 2012 Page 108 of 181



Italy


Srings, S. Africa

Qualified For PIPE FITTINGS ; FLANGE: PIPE; SLIP ON; ALLOY STEEL













Italy


Srings, S. Africa


Qualified For PIPE FITTINGS ; FLANGE: PIPE; SLIP ON; CARBON STEEL













Italy


Srings, S. Africa

12 May, 2012 Page 109 of 181


Qualified For PIPE FITTINGS ; FLANGE: PIPE; SLIP ON; LOW TEMP STEEL














Italy


Srings, S. Africa


Qualified For PIPE FITTINGS ; FLANGE: PIPE; SOCKET WELD; ALLOY STEEL






Italy


Srings, S. Africa

6228 ULMA FORJA S. CORP. Spain


6233 NATIONAL FLANGE Houston, TX

Qualified For PIPE FITTINGS ; FLANGE: PIPE; SOCKET WELD; CARBON STEEL





12 May, 2012 Page 110 of 181


Italy


Srings, S. Africa




Qualified For PIPE FITTINGS ; FLANGE: PIPE; SOCKET WELD; LOW TEMP STEEL






Italy


Srings, S. Africa




Qualified For PIPE FITTINGS ; FLANGE: PIPE; SPECTACLE PLATE; ANY STEEL









Saudi

6239 LA MECCANICA PADANA Italy

6240 MUELLER FLOW TECHNOLOGIES Houston, TX

Qualified For PIPE FITTINGS ; FLANGE: PIPE; SPOOL; PIPE; JOINT/ INSULATING; FOR CATHODIC



5584 RHEINAUER MASCHINEN-UND ARMATURE

Germany

5597 T.D. WILLIAMSON INCORPORATED Tulsa, Ok.

12 May, 2012 Page 111 of 181

Qualified For PIPE FITTINGS ; FLANGE: PIPE; WELD NECK; ALLOY STEEL
















Italy


Srings, S. Africa



USA

Qualified For PIPE FITTINGS ; FLANGE: PIPE; WELD NECK; CARBON STEEL














12 May, 2012 Page 112 of 181



Italy


Srings, S. Africa


Qualified For PIPE FITTINGS ; JOINT: PIPE; EXPANSION; ANY METAL


6140 TOWNSON ENGINEERING LTD United Kingdom

6141 FLEXIDER SPA Italy

6142 IWK REGLER AND KOMPENSATOREN Germany

6143 OFFICINE A. MELESI AND CO Italy

6144 PATHWAY BELLOWS/DOVER CORPORATION

Oakridge, TN

6145 YARWAY/KEYSTONE INTERNATIONAL Blue Bell, Pa

6146 SWECO FAB/ PIPING TECHNOLOGY AND PRODUCTS, INC.

Houston, TX

6147 HYSPAN PRECISION PRODUCTS, INC. Chula, Vista, Calif.

6148 POSIFLEX United Kingdom

6149 KLEBER COLOMB France

6150 STENFLEX Germany

5490 SUNG JIN MACHINERY CO., LTD. Korea

Qualified For PIPE FITTINGS ; NIPPLE: PIPE; ANY METAL




Italy



Netherlands


6236 WILSONS PLC United Kingdom

Qualified For PIPE FITTINGS ; REDUCER: PIPE; BUTT WELD; ALLOY STEEL






12 May, 2012 Page 113 of 181





Korea


Italy



6089 ERNE FITTINGS GMBH & CO Schlin, Austria

6108 SHAW ALLOY PIPING Shreveport, La



6245 SCHULZ EXPORT GMBH Germany


6251 CUSTOM ALLOY CORP. High Bridge, NJ



Paola, Kansas

6260 LADISH COMPANY/TRINITY INDUSTRIES

Russellville, Arkansas




Qualified For PIPE FITTINGS ; REDUCER: PIPE; BUTT WELD; CARBON STEEL








Korea

5901 GELDBACH INDUSTRIE AG Germany


Italy

6031 RACCORDI FORGIATA Nabbiano

12 May, 2012 Page 114 of 181

6090 ERNE FITTINGS GMBH & CO Schlin, Austria

6109 SHAW ALLOY PIPING Shreveport, La






6252 CUSTOM ALLOY CORP. High Bridge NJ



Paola, Ks.




6272 LADISH COMPANY/TRINITY INDUSTRIES

Russelville, Ar

6273 CANADOIL Canada


Qualified For PIPE FITTINGS ; REDUCER: PIPE; BUTT WELD; LOW TEMP STEEL








Korea


Italy


6032 RACCORDI FORGIATA Nabbiano


6105 INTERFIT NA




12 May, 2012 Page 115 of 181


6253 CUSTOM ALLOY CORP. High Bridge, NJ



Palo, Kansas





Qualified For PIPE FITTINGS ; REDUCER: PIPE; SOCKET WELD OR THREADED; ANY METAL




Italy




NA

Qualified For PIPE FITTINGS ; SADDLE: PIPE; FULL ENCIRCLEMENT; STEEL; TWO HALVES; EXTR




6276 DANIEL FLOW PRODUCTS DIVISION Houston, Texas

6277 DANIEL MEASUREMENT & CONTROL Houston, Texas


Qualified For PIPE FITTINGS ; SCRAPER: PIPE; CLOSURE: DOOR ASSEMBLY; ANY METAL


6058 SIRTEC NIGI-SPA Italy

6059 T.D. WILLIAMSON S.A. Belgium

6060 MODCO INDUSTRIES, INC./MODERN SUPPLY

USA

5580 GD ENGINEERING United Kingdom

5582 PIPELINE ENGINEERING LTD. United Kingdom


Paola, Ks.

5596 T.D. WILLIAMSON INCORPORATED Tulsa, Ok.

12 May, 2012 Page 116 of 181

Qualified For PIPE FITTINGS ; SPACER: FLANGE: PIPE SPACER; ANY METAL














Italy



USA

6222 WELDFIT CORPORATION Houston, TX

Qualified For PIPE FITTINGS ; STUB END: PIPE; ALLOY STEEL





Korea



Houston, TX


Qualified For PIPE FITTINGS ; STUB END: PIPE; CARBON STEEL





Korea



12 May, 2012 Page 117 of 181

Qualified For PIPE FITTINGS ; STUB END: PIPE; LOW TEMP STEEL





Korea



Houston, TX


Qualified For PIPE FITTINGS ; TEE: PIPE: PIPE; BUTT WELD; LOW TEMPERATURE













Houston, TX




6113 TECHTUBI NA

6268 THAI BENKAN COMPANY LIMITED Thailand


Italy

6284 RACCORDI FORGIATTI Nibanno




Paola, Ks.


12 May, 2012 Page 118 of 181

Qualified For PIPE FITTINGS ; TEE: PIPE; BUTT WELD; ALLOY STEEL














Houston, TX





Italy

6282 RACCORDI FORGIATTI NA




Paola, Ks.


Qualified For PIPE FITTINGS ; TEE: PIPE; BUTT WELD; CARBON STEEL









12 May, 2012 Page 119 of 181






Houston, TX




6267 THAI BENKAN COMPANY LIMITED Thailand


Italy

6283 RACCORDI FORGIATTI Italy

6285 VECTOR INTERNATIONAL LTD. United Kingdom


5537 MECANICA DE LA PENA S.A. Spain



Paola, Ks.


Qualified For PIPE FITTINGS ; TEE: PIPE; SOCKET WELD OR THREADED; ALLOY



Italy





NA




Qualified For PIPE FITTINGS ; TEE: PIPE; SOCKET WELD OR THREADED; CARBON STEEL (ASME B16.11)



Italy



12 May, 2012 Page 120 of 181



NA




Qualified For PIPE FITTINGS ; TEE: PIPE; SOCKET WELD OR THREADED; LOW TWMP STEEL (ASME B16.11)



Italy





NA




6139 ETS DELCORTE SA FORGED STEEL Maubeuge, France

Qualified For PIPE FITTINGS ; TRAPS: STEAM; MECHANICAL


6299 GESTRA A. G. NA

6302 SPIRAX SARCO LTD. NA

6305 TROUVAY & CAUVIN S.A. France

6308 THREE RIVERS/ ARMSTRONG INTERNATIONAL

NA

6311 CRANE MANUFACTURING, INC. Tulsa, Ok.

6314 WRIGHT AUSTIN HAYWARD INDUSTRIAL PRODUCTS

NA

6317 YARWAY CORPORATION Bluebell, Pa

6320 SPIRAX SARCO INCORPORATED / SUBSIDIARY

NA

6323 THERM-OMEGA-TECH INCORPORATED

NA

6326 MUELLER STEAM SPECIALTY COMPANY

NA

6329 MIYAWAKI INC. NA

6332 TLV INTERNATIONAL INC. NA

12 May, 2012 Page 121 of 181

Qualified For PIPE FITTINGS ; TRAPS: STEAM; THERMODYNAMIC;






NA



NA



NA


NA


NA



Qualified For PIPE FITTINGS ; TRAPS: STEAM; THERMOSTATIC






NA



NA



NA


NA


NA



Qualified For PIPE FITTINGS ; Y-TEE: PIPE; FORGED; ANY METALL; ANY SIZE; SPECIAL: INTERGR


12 May, 2012 Page 122 of 181


Italy



Netherlands

6077 WFI INTERNATIONAL INCORPORATED Houston, TX


NA

Qualified For PIPE FITTINGS; FLANGE: PIPE; ANCHOR; FORGED; ANY STEEL







5762 WFI INTERNATIONAL INC. Houston, TX




Paola, Ks.

Qualified For PIPE: TUBE; STAINLESS STEEL


5694 AVESTA SANDVIK TUBE AB Storfors, Sweden

5700 CAMDEL METALS Camden, Delaware

5602 THE INDIAN SEAMLESS METAL TUBES LTD.

India

5640 SUMITOMO METAL INDUSTRIES LTD. Japan

5644 SCHOELLER-BLECKMANN Ternitz, Austria

5649 ASSOCIATED TUBE INDUSTRIES Markham, Ontario, Canada

Qualified For PIPE: BEND; CARBON STEEL; HOT; 5-D AND LARGERCCC: 010016


5305 KAWASAKI STEEL CORPORATION Japan

5446 NIPPON STEEL CORPORATION Japan

5465 SA FABRICOM Grimbergen, Belgium

5468 MANNESMANN ROHEN, MULHEIM Germany

5469 BABCOCK United Kingdom

5470 WESTER PIJPLEIDINGEN BV Netherlands

12 May, 2012 Page 123 of 181


5485 DAI-ICHI HIGH FREQUENCY CO., LTD. Japan

5486 NIKKI KOJI TSURUMI PLANT Japan

5489 SUNG JIN MACHINERY CO., LTD. Korea

Qualified For PIPE: CARBON STEEL; API 5L GRADE B THRU X-65; ERW AND HFI; 4 INCH AND LARGER; HYDROCARBON SERVICE EXCEPT SOUR GAS



5351 SAUDI STEEL PIPE COMPANY Saudi

5604 ARABIAN PIPES COMPANY (APC) Saudi

5622 SEAH STEEL CORPORATION Korea

5624 NIPPON STEEL CORPORATION HIKARI WORKS

Japan

Qualified For PIPE: CARBON STEEL; API 5L GRADE B THRU X-65; SEAMLESS; 4 INCH AND SMALLER


5414 THE INDIAN SEAMLESS METAL TUBES LTD

India

5424 VALLOUREC AND MANNESMANN TUBES

Germany

5431 ISCOR LTD./TOSA SEAMLESS TUBES Vereeniging, S. Africa


5456 SUMITOMO METAL IND. Japan

5496 U.S. STEEL TUBULAR PRODUCTS-FAIRFIELD WORKS

Fairfield, Al

5625 BENTELER AG Germany

5628 SIDERCA S.A.I.C. / COLD DRAWN DIVISION

Campana, Brazil, South America

5630 KOPPEL STEEL CORPORATION Ambridge, Pa.

Qualified For PIPE: CARBON STEEL; API 5L GRADE X-70; SEAMLESS; 6 INCH AND LARGER



5320 NIPPON KOKAN K.K. Japan



Germany

5429 DALMINE TUBI INDUSTRIALI SRL. Italy

5437 SIDERCA SAIC/ COLD DRAWN DIVISION



12 May, 2012 Page 124 of 181



Fairfield, Al


India

Qualified For PIPE: CARBON STEEL; API 5L, GRADE B THRU X-65; ERW AND HFI; 4 INCH AND LARGER; FOR NON HYDROCARBON SERVICE





5360 UMRAN STEEL PIPE INC. Instanbul, Turkey

5365 CONFAB TUBOS, S.A. Pindomonhangaba, Brazil, South America

5398 ILVA LAMIERE E TUBI SRL Italy



5606 ALESSIO TUBI S.P.A. Italy

5608 BRITISH STEEL PLC United Kingdom

5610 CORINTH PIPEWORKS Corinth, Greece

5612 MANNESMANN HOESCH PRAZISROHR GMBH

Germany

5614 TDI TUBI DALMINE ILVA SRL Italy

5615 PRUDENTIAL STEEL LTD./DOFASCO Canada

5617 HYUNDAI PIPE CO., LTD. Korea

5619 SHINHO STEEL CO., LTD. Korea


Qualified For PIPE: CARBON STEEL; API 5L, GRADE X-70; ERW AND HFI; 4 INCH AND LARGER, FOR NON HYDROCARBON SERVICE








Germany


12 May, 2012 Page 125 of 181


5607 ALESSIO TUBI S.P.A. Italy

5609 BRITISH STEEL PLC United Kingdom

5611 CORINTH PIPEWORKS Greece

5613 MANNESMANN HOESCH PRAZISROHR GMBH

Germany

5616 PRUDENTIAL STEEL LTD./DOFASCO Canada

5618 HYUNDAI PIPE CO., LTD. Korea

5620 SHINHO STEEL CO., LTD. Korea


Qualified For PIPE: CARBON STEEL; GRADE B THRUGH 6; SEAMLESS; 4 INCH AND SMALLER



Germany





Fairfield, Al


India


5629 SIDERCA S.A.I.C. / COLD DRAWN DIVISION


5631 KOPPEL STEEL CORPORATION Ambridge, Pa.

Qualified For PIPE: NON-METALLIC; RTRP EPOXY/ POLYESTER/ VINYL ESTER RESIN; ADHESIVE



Saudi

5501 BONDSTRAND LIMITED Saudi

5503 FUTURE PIPE INDUSTRIES UAE

5505 AMERON BV Netherlands

5507 CENTRON CORPORATION Mineral Wells, TX

5509 SMITH FIBERGLASS PRODUCTS INC. Little Rock, AR

Qualified For PIPE: NON-METALLIC; RTRP EPOXY/ POLYESTER/ VINYL ESTER RESIN; RESTRAINE



Saudi

12 May, 2012 Page 126 of 181

5502 BONDSTRAND LIMITED Saudi

5504 FUTURE PIPE INDUSTRIES UAE

5506 AMERON BV Netherlands

5508 CENTRON CORPORATION Mineral Wells, TX

5510 SMITH FIBERGLASS PRODUCTS INC. Little Rock, AR

5511 AMERON PTE. Singapore

Qualified For PIPE: NON-METALLIC; THERMOPLASTIC, PVC; UPVC; 8 INCH AND SMALLER


5512 ABDULLAH BUSBATE AND PARTNERS COMPANY

Saudi

5513 GULF PLASTIC INDUSTRIES W.L.L. Bahrain

5514 SAUDI PLASTIC PRODUCTS COMPANY LIMITED

Saudi

5515 PASCO FRO PLASTIC INDUSTRIES Saudi

5516 GEORGE FISCHER A.G. Schaffhausen, Switzerland

5517 SEKISUI SINGAPORE PTE LTD. Singapore

5518 PLASCO FOR PLASTIC INDUSTRIES Saudi

Qualified For PIPE: PIPE; HEADER; EXTRUDED OR REINFORCED BRANCHES; ANY APPLICATION




5534 L.P. S.P.A. Italy


Paola, Ks.

5655 LADISH DIVISION/TRINITY INDUSTRIES Arkansas

Qualified For PIPE: PIPE; SCRAPER TRAP; STEEL



Saudi



5578 FAI-OFFICINE DI CARVICO SPA Italy

5579 GD ENGINEERING United Kingdom

5581 PIPELINE ENGINEERING LTD. United Kingdom

5583 RHEINAUER MASCHINEN-UND ARMATURE

Germany


Paola, Ks.

12 May, 2012 Page 127 of 181

5595 T.D. WILLIAMSON INCORPORATED Tulsa Ok.

Qualified For PIPE: SPOOL; FABRICATED; ANY METAL; ANY SIZE; NON-SKID MOUNTED


4673 BABCOCK ENERGY LTD. United Kingdom

5003 R. E. ENGINEERING Bahrain

5298 AL-QAHTANI PIPE COATING TERMINAL Saudi

5409 NIPPON STEEL CORPORATION KIMITSU WORKS

Japan


Rue La Veissiere, France





Saudi

5525 MC DERMOTT UAE

5527 PDM SAUDI ARABIA LIMITED Saudi

5529 SAUDI ARABIAN FABRICATED METALS INDUSTRY

Saudi

5531 FAI – OFFICINE DI CARVICO S.P.A. Italy




5547 OFFENHAUSER COMPANY Houston, TX

5549 HOWE-BAKER ENGINEERS, INC. Tyler, TX


Saudi


Saudi

5553 SHAW NASS MIDDLE EAST Bahrain

5554 ABDULLAH AL-HAMOUD AL-SHUWAYER HEAVY METAL INDUSTRIES

Saudi

5555 AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi


5560 FBM HUDSON Italy

5561 FORTH TOOL & VALVE Fife, Scotland

5562 HYUNDAI HEAVY INDUSTRIES CO., LTD. ULSAN PLANT

Korea

12 May, 2012 Page 128 of 181

Qualified For PIPE: SPOOL; METALLIC; SKID MOUNTED; PIPING SYSTEM




5002 R. E. ENGINEERING Bahrain


Japan





Saudi

5524 MC DERMOTT UAE

5526 PDM SAUDI ARABIA LIMITED Saudi

5528 SAUDI ARABIAN FABRICATED METALS INDUSTRY

Saudi

5530 FAI – OFFICINE DI CARVICO S.P.A. Italy




5546 OFFENHAUSER COMPANY Houston, TX

5548 HOWE-BAKER ENGINEERS, INC. Tyler, TX

5550 HYUNDAI HEAVY INDUSTRIES CO., LTD. ULSAN PLANT

Korea

Qualified For PIPE: STAINLESS STEEL; ASTM; ANY PROCESS; ANY SIZE


5390 ERNDTEBRUCKER EISENWERK GMBH & CO.

Germany

5418 PRODUCTOS TUBULARES Vizcaya, Spain

5493 TUBACEX TUBOS INOXIDABLES S.A. Spain


5633 ERNDTEBRUECKER EISENWERK GMBH & CO

Europe


12 May, 2012 Page 129 of 181

5641 DMV STAINLESS ITALIA Italy

5642 DMV STAINLESS FRANCE Montbard, France

5643 SCHOELLER-BLECKMANN Ternitz, Austria

5646 TRENT TUBE DIV./CRUCIBLE MATERIAL CORP.

Carrollton, Georgia

5647 DAVIS PIPE & METAL FABRICATORS Blountville, Tn.

5648 ASSOCIATED TUBE INDUSTRIES Markham, Ontario, Canada

5651 ALTX INC./TUBACEX Watervliet, Ny.

5652 AVESTA SHEFFIELD PIPE COMPANY Wildwood, Fla.

5653 SANYO SPECIAL STEEL CO., LTD. Japan

5654 STAINLESS STEEL PIPE KOGYO CO., LTD.

Japan

Qualified For PIPE: STEEL API 5L; GRADE B THROUGH X65; SINGLE STRAIGHT SEAM SAW; SIZE 6 INCH AND LARGER




5354 NATIONAL PIPE COMPANY LIMITED Saudi



5374 NIPPON KOKAN K.K Japan

5376 MAN INDUSTRIES LTD. India

5378 SAW PIPES LIMITED India

5380 BERGROHR GMBH SIEGEN Germany

5383 CORUS CONSTRUCTION & INDUSTRIAL

United Kingdom

5384 CORUS TUBES United Kingdom

5385 EISENBAU KRAEMER M.B.H Germany


Germany

5391 EUROPIPE FRANCE S.A. France

5394 EUROPIPE GMBH Germany


5399 BERG STEEL PIPE CORP. Panama City , Florida

5401 NAPA PIPELINE/OREGON STEEL MILLS Napa, Calif.

5404 SAW PIPES USA INCORPORATED USA

12 May, 2012 Page 130 of 181


Japan

5411 OSAKA TOKUSHU KOKAN Japan

Qualified For PIPE: STEEL API 5L; GRADE X-70; SINGLE STRAIGHT SEAM SAW; SIZE 6 INCH AND LARGER






5377 MAN INDUSTRIES LTD. India

5379 SAW PIPES LIMITED India



Germany




5405 SAW PIPES USA INCORPORATED USA


Japan

5598 UMRAN STEEL PIPE INC. Istanbul, Turkey

Qualified For PIPE: STEEL, API 5L GRADE B, THROUGH X-65, SEAMLESS, 6 INCH AND LARGER





5413 THE INDIAN SEAMLESS METAL TUBES LTD

India



Germany

5427 MANNESMANNROEHREN-WERKE AG Germany

5428 DALMINE TUBI INDUSTRIALI SRL. Italy


5433 VOEST-ALPINE STAHLROHR KINDBERG GMBH

Kindberg, Austria



12 May, 2012 Page 131 of 181

5438 MANNESMANN S/A Belo Horozonte, Brazil, South America

5440 ROCKY MOUNTAIN STEEL MILLS/OREGON STEEL MILLS

Pueblo, Colorado

5441 TUBOS DE ACERO DE MEXICO/TAMSA Veracruz, Mexico

5443 NORTH STAR STEEL Youngstown, Oh.



Qualified For PIPE: STEEL; ALL GRADES; LOW TEMPERATURE; SEAMLESS







Germany

5434 VOEST-ALPINE STAHLROHR KINDBERG GMBH

Kindberg, Austria



5439 MANNESMANN S/A Belo Horozonte, Brazil, South America

5442 TUBOS DE ACERO DE MEXICO/TAMSA Veracruz, Mexico

5444 NORTH STAR STEEL Youngstown, Oh.



5492 TUBACEX TUBOS INOXIDABLES S.A. Spain


Fairfield, Al

5498 GULF STATES TUBE / DIVISION OF VISION METALS

USA

Qualified For PIPE: STEEL; API 5L GRADE B THROUGH X-65; SPIRAL WELDED SAW; 14 INCH AND LARGER




5357 SALZGITTER AG Germany


12 May, 2012 Page 132 of 181


5367 NAPA PIPE CORPORATION/OREGON STEEL MILLS

Napa, Calif.

5369 SAW PIPES USA, INCORPORATED USA

5371 TUBESA, S.A. DE C.V. San Luis Potosi, Mexico


Qualified For PIPE: STEEL; API 5L X-70; SPIRAL WELDED SAW; 14 INCH AND LARGERCCC: 010015




5368 NAPA PIPE CORPORATION/OREGON STEEL MILLS

Napa, Calif.

5370 SAW PIPES USA, INCORPORATED USA

5372 TUBESA, S.A. DE C.V. San Luis Potosi, Mexico


Germany

Qualified For PIPE: STEEL; ASTM SINGLE STRAIGHT SEAM SAW; LOW TEMPERATURE; SIZE 6 INCH AND LARGER






Germany



5400 BERG STEEL PIPE CORP. Panama City, Florida



Japan

5412 OSAKA TOKUSHU KOKAN Japan

5491 NIPPON KOKAN K.K. /FUKUYAMA WORKS

Japan

Qualified For PIPE: STEEL; COATED; EXTERNAL; EXTRUDED POLYETHYLENE




12 May, 2012 Page 133 of 181



Qualified For PIPE: STEEL; COATED; EXTERNAL; FUSION BONDED EPOXY





5326 ARABIAN PIPE COATING COMPANY Saudi


Qualified For PIPE: STEEL; COATED; EXTERNAL; WEIGHT CONCRETE




5343 AMERON SAUDI ARABIA LIMITED Saudi

5346 RAYMOND SAUDI ARABIA LIMITED Saudi

Qualified For PIPE: STEEL; COATED; INTERNAL; CEMENT





5344 AMERON SAUDI AsaudiRABIA LIMITED Saudi

5347 RAYMOND SAUDI ARABIA LIMITED Saudi

5348 CEMENT LINING COMPANY INCORPORATED

Houston, TX

Qualified For PIPE: STEEL; COATED; INTERNAL; FUSION BONDED EPOXY





Qualified For PIPE: STEEL; COATED; INTERNAL; PHYNOLIC EPOXY






12 May, 2012 Page 134 of 181


Qualified For PIPE: STEEL; GALVANIZED




Qualified For PIPE: STEEL; LOW ALLOY AND ALLOY (OTHER THAN STAINLESS STEEL); SEAMLES




Rue La Veissiere, France

5557 AVESTA SANDVIK TUBE AB Torshalla, Sweden


5632 ERNDTEBRUECKER EISENWERK GMBH & CO

Germany

5634 TITANIUM INDUSTRIES Fairfiled, NJ

5636 RMI TITANIUM COMPANY Niles, Oh.


Qualified For PIPE: TUBE; STEEL-ALLOY


5692 ACCLES & POLLOCK LTD. United Kingdom


5695 POPPE & POTTHOFF GMBH & CO Germany

5696 STERLING TUBES LTD. United Kingdom

5697 SANDVIK TUBES AB Sandviken

5698 TPS TECHNITUBE Germany

5699 CAMDEL METALS Camden, Delaware

5701 SHINKO METAL PRODUCTS Japan

5702 SUMIKAN STAINLESS TUBE Japan




India

5635 TITANIUM INDUSTRIES Fairfiled, NJ

5637 RMI TITANIUM COMPANY Niles, OH.

Qualified For PLATFORM, GRATINGS, RAILING & STAIRS


12 May, 2012 Page 135 of 181





8103 GAMA Saudi

8102 AIC Saudi

8101 Arabian Tank & Vessel Saudi

8100 MAG Saudi



Saudi


8050 ZAMIL STEEL INDUSTRIES Saudi

Qualified For Portable Analyzer



Qualified For POSITION SWITCH


7525 NAMCO CO. USA

Qualified For POSITION TRANSMITTER


7526 M-SYSTEM USA

Qualified For POSITIONER


7537 FISHER CO. MASONELIAN USA

Qualified For POSITIVE DISPLACEMENT (PUMPS)


5171 IMO USA

5173 LEISTRITZ Germany

5175 CERPELLI Italy

Qualified For Power & Lighting Installations * for warehouse and HFO/CO booster pump station


8184 SSL (Salem Schereder Lighitng) Saudi

8181 AL BABTAIN Saudi

8182 Saudi Co. for Modern Lighting Saudi

12 May, 2012 Page 136 of 181

8183 SAUDI LIGHTING Co Saudi

Qualified For POWER /OR CONTROL CABLE (0.6/1KV)


8442 Alfanar CO. Saudi 1. Subject to the technical acceptance & conforming to prevailing specifications and test requirements.2. Extended ten (10) years Guarantee / Warranty shall be applicable for all supplies directly or through contractors.

8449 BAHRA Saudi LV Power Cables Copper & Aluminium only.

9321 Jordan New Cable Company Jordan Copper/Aluminum Cables Up to 600/1000Volt,and as per SEC Specification 11-TMSS-10

6921 BELDEN USA



Saudi




Qualified For POWER AND LIGHTING INSTALLATIONS



7258 SAUDI CO. FOR MODERN LIGHTING Saudi

7259 SAUDI LIGHTING CO. Saudi

7260 SSL (SALEM SCHEREDER LIGHTING) Saudi

Qualified For POWER CONTROL AND INSTRUMENTATION CABLES


6969 BICC United Kingdom

6970 ROCKBESTOS SUPERNAUT USA

6971 TAMAQUA USA

6972 PIRELLI Italy

6973 OKONITE – PREFERRED USA

6974 FURON/DEKORON USA

6975 ROME USA

6976 SOUTHWIRE – PREFERRED USA

6977 BELDEN – COMMUNICATION CABLE PREFERRED

USA

12 May, 2012 Page 137 of 181

6978 KERITE USA

Qualified For POWER LINE CARRIER EQPT.


6507 ABB SWEDEN/ SWITZERLAND

6618 AREVA France


7368 ABB INFOCOM LTD. France

7369 GENERAL ELECTRIC CO. USA

7370 NERA NORWAY

Qualified For Pressure & Temperature instrument (Gage,Switchs,Thermocouples,Thermo Well)



Qualified For PRESSURE AND DIFFERENTIAL PRESSURE SWITCHES


7619 MAGNETROL Heikensstraat 6, 9240 Zele, Belgium

7665 ITT-MCDONNELL AND MILLER USA

7666 SOR, INC USA

7669 SOR EUROPE United Kingdom

7779 WIKA Echt, NL


7796 CUSTOM CONTROL SENSORS, INC United Kingdom

7798 DRESSER INDUSTRIES, ASHCROFT INSTRUMENT DIV

Saudi

7800 MERCOID CORP USA

7802 UNITED ELECTRIC CONTROLS USA

Qualified For PRESSURE AND DIFFERENTIAL PRESSURE TRANSMITTERS


10089 Endress+Hauser Gmbh+Co.KG Germany

10088 Endress+Hauser Conducta Gmbh+Co.KG Germany

8716 Endress+Hauser Flowtec AG,Switzerland Switzerland





12 May, 2012 Page 138 of 181



7773 SMAR USA

Qualified For PRESSURE GAUGES


9786 RUEGER SA Switzerland

7775 AMETEK, INC. (U.S. GAUGE PMT) 820 Pennsylvania Blvd. Feasterville, PA 19053

7778 WIKA Echt, NL


Saudi

7784 DRESSER INSTRUMENT DIVISION, ASHCROFT

USA


Germany

7789 DWYER INSTRUMENTS, INC. (MAGNEHELIC)

USA

Qualified For PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS FROM 38 MM THRU 76 MM(1.5 THRU 3 IN)


9867 BHI Korea

9801 Tech International FZC UEA

4594 BELLELI SAUDI HEAVY IND. LIMITED Saudi

4621 RAMSIS ENGINEERING Bahrain

4818 CHIYODA PROTECH CORPORATION Japan


Japan


Saudi

4642 ESCHER HOLLAND B.V Netherlands

4649 FBM – HUDSON ITALIANA SPA Italy

4654 GENIUS VOS BV Netherlands

4659 IMS SPA INDUSTRIE MECCANICHE SCARDELLATO SPA

Italy

4664 LINDE A.G. PROCESS ENG.& CONTRACTING

Germany


4677 SANTAZ-CENSA S.A. Porrino-Pontevedra, Spain


12 May, 2012 Page 139 of 181



Korea



Korea



Denmark

4753 DOOSAN MECATEC CO. LTD. Korea



4780 MB FABRICATORS United Kingdom

4785 OLMI Italy


Japan

4800 ATB CALDERERIA SPA Italy

4803 GENERAL WELDING WORKS, INC Houston, TX


Paola, KS

4609 MARITIME INDUSTRIAL SERVICES UAE


Germany


Saudi

Qualified For PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS GREATER THAN 76 MM (3 IN)



9868 BHI Korea


4819 CHIYODA PROTECH CORPORATION Japan

4821 OFFICINE LUIGI-RESTA S.P.A. Italy

4822 IMS INDUSTRIE MECCANICHE SCARDELLATO SPA

Italy


12 May, 2012 Page 140 of 181




4689 HITACHI Japan



Korea



Korea

4730 MARITIME INDUSTRIAL SERVICES. Sharjah, UAE



Japan





4786 OLMI Italy


Japan




Paola, KS


Germany

Qualified For PRESSURE VESSEL: NOT OTHERWISE LISTED (PROCESS DESIGNERS, RECTANGU



4625 AL-SAGHYIR STEAM BOILERS C. Saudi


Saudi

4823 IMS INDUSTRIE MECCANICHE SCARDELLATO SPA

Italy

4824 KCC PROCESS EQUIPMENT, LTD. United Kingdom

4826 HASON STEEL PRODUCTS, INC. Canada

4827 NATCO, DIV. OF NATIONAL TANK CO. USA

12 May, 2012 Page 141 of 181

4828 BURGESS-MANNING INC./NITRAM ENERGY

Wichita Falls, TX

4830 PERRY EQUIPMENT CORPORATION (PECO)

Mineral Wells, TX


4831 TECHNOTHERM CORPORATION Tulsa, OK


Korea



Germany




Saudi


4771 ENPRO SYSTEMS. INC. USA


Paola , KS



Germany

Qualified For PRESSURE VESSEL: CARBON STEEL, MAX. WALL THICKNESS OF 19 MM (0.75 IN).




4624 AL-SAGHYIR STEAM BOILERS C. Saudi


4628 YANBU STEEL CO. Saudi


Saudi

4638 BERGUM IMPIANTI Italy


4644 ROLLE SPA Italy



4597 DEUTCHE BABCOCK UAE


Italy

12 May, 2012 Page 142 of 181

4660 STAHL-UND APPARATEBAU HANS LEFFER GMBH

Germany


Germany



4682 SAUDER CUSTOM FABRICATION, INC. Emporia, Kansas




Korea


4599 FACET IBERIA Spain


Korea


Saudi


Saudi

4606 GULF MARINE MAINTENANCE & OFFSHORE SERVICES(GMMOS)

UAE

4607 MARITIME INDUSTRIAL SERVICES CO., LTD. (MIS) ARABIA

Saudi



Saudi

Qualified For PRESSURE VESSELS: CARBON STEEL AND LOW ALLOY, MAX. WALL THICKNESS OF 38 MM (1.5 IN)






Saudi


4645 ROLLE SPA Italy



4598 DEUTCHE BABCOCK UAE

4661 STAHL-UND APPARATEBAU HANS LEFFER GMBH

Germany

12 May, 2012 Page 143 of 181


Germany



4683 SAUDER CUSTOM FABRICATION, INC. Emporia, KS




Korea


Korea

4727 GULF MARINE MAINTENANCE & OFFSHORE SERVICES (GMMOS)

UAE




Denmark


Japan


Saudi


Italy

4748 WARNER LEWIS INDUS. FILTER GMBH Germany




4770 ENPRO SYSTEMS. INC. USA



4782 WELLMAN ROBEY United Kingdom

4783 OLMI Italy

4791 GENERAL WELDING WORKS, INC. Houston, TX


Japan


Saudi

Qualified For PRESSURE VESSELS: STAINLESS STEEL (SS) AND OTHER HIGH ALLOYS, NON-FER



12 May, 2012 Page 144 of 181


Saudi




Italy


4676 SANTAZ-CENSA S.A. Porrino-Pontevedra,Spain

4684 SAUDER CUSTOM FABRICATION, INC. Emporia, KS





Korea




Japan

4749 WARNER LEWIS INDUS. FILTER GMBH Germany





4784 OLMI Italy


Japan



4802 GENERAL WELDING WORKS, INC Houston, TX


Paola, KS

4808 TAKAHASHI IRON WORKS CO. LTD. Japan


Germany

4815 LINDE A.G. PROCESS ENG. & CONTRACTING

Germany


Saudi

4816 ENPRO SYSTEMS, INC. USA

12 May, 2012 Page 145 of 181

4817 NIPPON SANSO K.K. Japan

Qualified For PROTECTIVE COATINGS / PAINTS / CHEMI. RESISTING COATINGS


8146 Hani Al Elaimi Est. Saudi

8293 OASIS AMERON Ltd. Saudi

8292 JOTUN PAINTS Saudi

8291 HEMPEL PAINTS Saudi

8290 SIGMA PAINTS Saudi

8294 INTERNATIONAL PAINT Saudi

8328 AL-JAZEERA PAINTS Saudi Non

8234 Hani Al Elaimi Est. Saudi


8080 JOTUN Saudi NO

8235 Delta Group Ltd Saudi

8051 SIGMA PAINTS Saudi

8052 HEMPEL PAINTS Saudi

Qualified For PROTECTIVE RELAYS


6516 ABB Germany

6629 AREVA FRANCE / STAFFORD, ENGLAND


6696 VA TECH United Kingdom

7355 MERLIN GERIN France

7375 GE United Kingdom

7444 ELECTRO-SWITCH USA

7445 MR Germany

7446 SEL USA

Qualified For PROTECTIVE RELAYS FOR MOTORS


7447 MULTILIN Canada

Qualified For PUMPS, FIRE WATER


10105 Saudi Pump Factory Saudi Max Capacity: 1135 m³//hr

12 May, 2012 Page 146 of 181



5279 ITT ALLIS CHALMERS PUMP na

5280 FAIRBANKS MORSE na

5281 PATTERSON USA

5282 WORTHINGTON na

Qualified For PURITY ANALYZER


7528 YOKOGAWA PACIFICORP STANDARD Japan

Qualified For RAISED FLOORS


8218 Mohd Mansour Al Rumaih Est. Saudi


Qualified For RECORDERS - MULTI-POINT


7643 YAMATAKE Japan




7990 CHINO Japan

Qualified For RECORDERS: CHART


6522 ABB United Kingdom





7989 CHINO Japan

Qualified For RECORDERS; : CHART – FIELD




7991 CHINO Japan

8000 ABB AUTOMATION LTD United Kingdom

12 May, 2012 Page 147 of 181

Qualified For REGULATOR: AIR-FILTER


7489 EMERSON-FISHER CONTROLS CO. USA

7491 FAIRCHILD INDUSTRIAL PRODUCTS CO.

3920 West Point Blvd. • Winston-Salem, NC 27103

7494 MARSH BELLOFRAM 9 Castle Park Queens Drive, Nottingham, NG2 1AH


8033 IMI NORGREN USA

Qualified For REGULATORS - PRESSURE AND FLOW



7985 MASONEILAN INTERNATIONAL, INC USA

7986 EMERSON-FISHER CONTROLS USA

Qualified For REGULATORS - TEMPERATURE


6521 ABB USA

7987 AMOT CONTROLS CORP United Kingdom

7988 LESLIE CONTROLS COMPANY USA

Qualified For REINFORCING BARS STRAIGHT (12M LONG)



8093 SAUDI METAL COATING CO. Saudi

8209 GULF STEEL COATING Saudi

Qualified For Relay & Control Panal


9886 JAL INTERNATIONAL Saudi 1-Up to 132KV2-Extended warranty in respect of defects due to Desgine,manufacturing,and workmanship for ten years for the first project & susbsequently redused yearly for onwards projects.3-Subject to technical evaluation fo acceptance to each project.

Qualified For RELAY & CONTROL PANEL


9596 Rose Systemtechnik GmbH Germany Only Emergency Push & Start/Stop Push Button

12 May, 2012 Page 148 of 181

9703 Proton Energy Systems USA Stable Flow units

6514 ABB SWEDEN

6575 HAWA ELECTRIC PANEL Saudi

6576 REMAL FACTORY Saudi

6598 ABB/AEIL Saudi

6599 AEL -SIEMENS Saudi



6694 VA TECH RIYADH

6700 WESCOSA Saudi

6710 EPS LTD. Saudi

6712 ETA-PCS UAE Type/design, special, routine tests shall be performed for first project at an independent laboratory in the presence of 3rd party & 3 SEC Engineers. Extended warranty for 10 years.

7010 LS Korea

7408 ACRASTYLE United Kingdom

7409 AL-FANAR ELECTRICAL SYSTEM Saudi UP TO 132kV ONLY, IP41 TYPE TEST IS REQUIRED IN FIRST SUPPLY.

7410 CRUINKSHANK & PARTNERS LTD. United Kingdom

7411 MOHD. AL-OJAIMI LTD. Riyadh

7413 REYROLLE LTD. United Kingdom

7414 SCHNEIDER H.V FACTORY France

7415 TIEPCO Saudi

Qualified For RELAYS - ELECTRO-MAGNETIC


7482 TYCO – POTTER AND BRUMFIELD USA

7483 CUTLER HAMMER United Kingdom

7484 OMRON (WWW.OMRON.COM) ELECTRONIC COMPONENTS 55 COMMERCE DRIVE, SCHAUMBURG, IL 60173 USA

7485 PHOENIX CONTACTS Germany

7486 ALLEN BRADLEY/ROCKWELL AUTOMATION

Belgium

12 May, 2012 Page 149 of 181

Qualified For RELAYS – PNEUMATIC



7490 FAIRCHILD INDUSTRIAL PRODUCTS CO.

3920 WEST POINT BLVD. • WINSTON-SALEM, NC 27103

7492 SIEMENS- MOORE PRODUCTS YEOVIL

7493 MARSH BELLOFRAM 9 CASTLE PARK QUEENS DRIVE, NOTTINGHAM NG2 1AH

Qualified For REMOTE SEALS; CHEMICAL SEAL


7776 AMETEK, INC. (U.S. GAUGE PMT) USA


Saudi


Germany


Qualified For REMOTE TERMINAL UNIT (RTU)


6515 ABB Germany

6626 AREVA France


6695 VA TECH France

7426 FOXBORO COMPANY Australia

7427 GE HARRIS Canada

7429 HARRIS CORPORATION USA

7430 JAL INTERNATIONAL Saudi

7432 MICROSOL LTD. United Kingdom

7434 SAT Austria

7435 SIEMENS (LANDYS) - TELEGYR USA

Qualified For RESISTANCE TEMPERATURE DETECTORS


7858 ABB AUTOMATION PRODUCTS GMBH Germany

7860 MINCO PRODUCTS INC. USA

7862 CONAX BUFFALO CORPORATION USA

12 May, 2012 Page 150 of 181

7863 THERMO ELECTRIC CO., INC USA

7865 THERMO ELECTRIC EUROPE BV OUDE MEER, NL

7867 WATLOW GORDON USA

Qualified For RESTRICTION ORIFICES - UNION TYPE; FLOWMETER; MULTIPHASE


7747 ROXAR FLOW MEASUREMENT AS BERGEN, NO

7749 3-PHASE MEASUREMENTS AS BERGEN, NO

7750 AGAR CORP USA

7751 PIETRO FIORENTINI Italy

Qualified For Revolving raked bar screen


9766 HUBERT STAVOREN B.V. Netherlands For :Automatic and Cable operated bar screen including mobile type:Channel Width: 1 - 6 m , Water depth : 1- 6 mFlow Capacities : 80,000 m3/h , Bar Pitch :20 - 50 mm The Damran model as a mobile type

9760 Hyorim Industries Inc. Korea Channel Width: 1 - 6 m , Bar Pitch :20 - 150 mm Number of raking teeth per screen: 4 - 10 each Rotating speed: 6 - 12 m/min

Qualified For RMU, 15 KV


6506 ABB Saudi

6617 AREVA France

7345 FRITZ DRIESHER KG Germany

7352 EPS/M&G Saudi

7353 GULF REYROLLE LTD Saudi

7354 MERLIN GERIN France

7356 SAUDI LUCY Saudi

7357 SIEMENS AG EVM Germany

7358 THE INTERNATIONAL ELECTRICAL PRODUCTS CO.

Saudi

7359 W. LUCY United Kingdom

Qualified For ROAD MARKINGS & GUARD RAILS


8198 Al-Haramain Industrial Group Co. Saudi

8092 AL-HARAMAIN INDUSTRIAL GROUP Saudi

12 May, 2012 Page 151 of 181

Qualified For ROLLER SHUTTER DOORS


8088 KHALID AL-HOWAISH EST. Saudi


Qualified For ROOF WATER PROOFING SYSTEM


8084 NATIONAL TRADING EST. Saudi

8238 National Trading Est. Saudi

Qualified For Rotary bar screen


9761 Hyorim Industries Inc. Korea Channel Width: 1.5 - 4.5 m , Bar Pitch: 10 - 150 mmPitch of carrying chain: 250 mm

Qualified For RUPTURE DISCS


6364 BS&B SAFETY SYSTEMS, INC USA

6365 FIKE METAL PRODUCTS CORP USA

Qualified For S.A.W HELICAL WELDED CARBON STEEL PIPE FOR PILING


8158 NATIONAL PIPE Co. Ltd. Saudi

8090 NATIONAL PIPE CO. LTD Saudi

Qualified For SAFETY RELIEF VALVES; FLANGED, CONVENTIONAL AND BALANCED BELLOWS


9403 S&S Valve Korea Safety Relief ValvesModels : ANSI (150 : 4500) Only for Water & Fluid application


Saudi

6338 DRESSER INDUSTRIAL VALVE USA

6340 ANDERSON GREENWOOD CROSBY United Kingdom

6344 FARRIS ENGINEERING USA

Qualified For SAFETY RELIEF VALVES; PILOT OPERATED; FOR PROCESSING PLANTS



Saudi

6339 DRESSER INDUSTRIAL VALVE USA

6341 ANDERSON GREENWOOD CROSBY USA

6345 FARRIS ENGINEERING Canada

12 May, 2012 Page 152 of 181

6356 TYCO – SAFETY SYSTEMS UK United Kingdom

Qualified For SAFETY RELIEF VALVES; PILOT OPERATED; FOR STORAGE TANKS AND SPHEROID



6357 TYCO – WHESSOE United Kingdom

6358 TYCO – VAREC USA

Qualified For Sample Handling Systems


9764 Isa Mannai Technical Services Est Saudi

Qualified For SAMPLING SYSTEM


9388 Forbes Marshall India Models: SWAS


8036 DR. LEYE Germany

8037 SENTRY USA

Qualified For Scaffoldings


10090 Binzagr Factory for Insulation Materials Co.Ltd

Saudi

Qualified For SCR



Qualified For SCR AND CO SYSTEMS


8924 Deayoung Catalyst and Environment(CNE) Company

Korea DRC type catalyst

5101 HITACHI na

5149 PEERLESS MFG Dalas,USA

5150 VECTOR na

Qualified For SEA WATER TRAVELLING BAND SCREEN


8973 HUBERT STAVOREN B.V. Netherlands Channel Width : up to 4 m , Capacity: 45,000 m³/h. Channel depths of up to: 15 m Design :Centre Flow (CF) ,Inline Flow (IF),Dual Flow (DF)

12 May, 2012 Page 153 of 181

8738 Hyorim Industries Inc. Korea Channel width : 1.5 - 7 m , Mesh size : 1.0 - 10 mmCapacity: 45,000 m³/h. Channel depths of up to: 15 m Design :Centre Flow ,Inline Flow, Dual Flow

5180 GEIGER Germany

5181 E. BEAUDREY France

5182 FAI OFFICINE Italy


5184 PERRIER SEREM France

Qualified For SEAL OIL GAUGE PANEL


7552 E-ONE USA

Qualified For Seamless Alloy Pipes,Over 18"


9492 Wyman Gordon USA

Qualified For Seawater Intake Pumps (SIP)


9994 DMW Japan -Model:VPF-Rate 1600m3/min-Head:32 m

Qualified For SECURITY SYSTEM


8105 SAS Saudi

8106 Rajab & Silsilah Saudi

7436 SAS Saudi

Qualified For Segregated Phase Bus Ducts



Up to 4.0KA for 1000V at 50°C

10131 Alfa Standard Italy Up to 4.0KA for 1000V at 50°C

9518 Simelectro France Model Transoduct SPB Series (MV,LV)

Qualified For SEQUENCE OF EVENTS RECORDER


7420 RONAN ENGINEERING USA

7428 GE HARRIS Canada

7431 JAL INTERNATIONAL Saudi

7433 MICROSOL LTD. United Kingdom

12 May, 2012 Page 154 of 181

Qualified For SEWAGE TREATMENT PLANT


10107 A.E.S ARABIA LTD. (AES) Saudi Capacity up to :2500 m3/hr

9826 Hyorim Industries Inc. Korea Sewage Tratment Systems up to 4000 m³/d










5211 TECH UNIVERSAL SANDS Saudi

Qualified For SHEATH VOLTAGE LIMITERS (SVL)


6498 ABB SWEDEN

7148 HAYCOLEC SWITCHGEAR PTY Australia

Qualified For SHIELDED CABLE FOR INSTRUMENTATION



Saudi

7181 ALPHA USA

7182 AT & T USA

12 May, 2012 Page 155 of 181

7183 BELDEN USA

Qualified For SHUNT CAPACITOR


6517 ABB USA

7334 COOPER (MCGRAW-ED) USA

7455 NOKIAN FINLAND

Qualified For SHUT DOWN CABINETS - LOCAL, ELECTRO-PNEUMATIC


6708 ELECTROMACH B.V. HENGELO, NL

6762 DRALLIM INDUSTRIES LTD United Kingdom


6768 TOTAL ENGINEERING SERVICES HARVEY,US

Qualified For SINGLE LOOP CONTROLLERS; CONTROLLER: MICROPROCESSOR





7938 EMERSON PROCESS MANAGEMENT United Kingdom

Qualified For SMART ZV CONTROLLER; SMART VALVE CONTROLLER AND SOFTWARE THAT PRO


7970 EMERSON- FISHER CONTROLS INC USA

7971 METSO AUTOMATION OY Helsinki, FI

Qualified For SOLENOID VALVES


6713 AUTOMATIC SWITCH CO. (ASCO) Scherpenzeel, NL

7529 CIRCLE SEAL CONTROLS USA

7530 MAXSEAL (FCX THOMPSON VALVES United Kingdom

7531 PARKER-SKINNER VALVE DIVISION USA

7532 VERSA VALVES USA

7534 HERION Germany

7535 BURKET Germany

7536 FESTO Germany

Qualified For SOOT BLOWER SYSTEM


12 May, 2012 Page 156 of 181


4959 DIAMOND POWER USA

4960 CLYED BARGEMAN United Kingdom


Qualified For SPARE PARTS FOR RMU & EOS


7360 CELLMEC Bahrain

Qualified For SPEED SENSORS (RPM)


7951 WOODWARD GOVERNOR USA



7960 ROCKWELL AUTOMAITON-ENTEK (IRD)

USA

7962 IRD UK LTD United Kingdom

Qualified For Spray Nozzle


9461 Lechler Germany

Qualified For STATIC EXCITATION INCL. TRANSFORMER


6530 MHI Japan


5082 ALSTOM POWER Germany

Qualified For STATIC SWITCH


6846 CYBEREX USA

6849 GUTOR ELECTRONICS LTD. WETTINGEN, SWITZERLAND

6851 POWERWARE USA

6853 SOLID-STATE CONTROLS INC. (AMETEK)

USA

Qualified For STATION POST INSULATOR PORCELAIN, UP TO 132 KV, 230 KV AND 380 KV



7194 LAPP Germany

7195 DIELVE Italy

7196 NGK Japan

12 May, 2012 Page 157 of 181

7197 PPC INSULATORS Austria

7199 SEDIVER France

7204 W.S.I India

Qualified For STATION SERVICE TRANSFORMER (SST)


9187 AREVA Germany No limitation for capacity .132 KV only

9186 ALSTOM GRID Turky No limitation for capacity and voltage.

9185 ABB TURKY No limitation for capacity and voltage.

9184 ABB Germany No limitation for capacity and voltage. Testeng Facilities at 60HZ is not availble.

9183 ABB Sweden-ludvika No Limitation for Capacity and Voltage.


Hungary - 132 KV- Two windings only.

9267 Fortune Electric Company Taiwan 132KVFor the first order of each rating and type,the design of transformer to be vetted and approved by Hitachi.Compliance of this shall be submitted to SEC for approval & record.

9188 BEST TURKY No limitation for capacity , 132 KV only .only of any two winding transformer.

8412 TBEA China Up to 50 MVA,132 KV .


9553 SHIHLIN ELECTRIC & ENGINEERING CORP. (SEEC)

Taiwan Up to 50 MVA/ 132 KV.Two winding transformer.


Belgium - 250 KV- Two/Three windings only.- In case of two LV windings, it shall be radial split windings.

9192 HYUNDAI Korea No limitation for capacity and voltage.

8793 SMIT TRANSFORMER B.V. Netherlands

8455 Toshiba Corporation Japan Up to 50 MVA, 132 KV only.

8445 EMCO Ltd. India Up to 63 MVA and 132 KV of any two winding transformer.

9190 ELIN Austria No limitation for capacity and voltage.

9073 ABB Spain No limitation for capacity and voltage.


Qualified For Steam Conditioning Valve (Attemperators)


10147 Nihon Koso Co. Japan

12 May, 2012 Page 158 of 181

Qualified For STEAM CONDITIONING VALVE (ATTEMPORATORS)


5128 CCI na

5283 EMERSON/FISHER-ROSEMOUNT CON-TEK

na

Qualified For STEAM TURBINE & GENERATOR


8461 ANSALDO ENERGIA S.p.A. Italy Up to 350 MW for HzModels:( MT5/10,MT15,MT20,and RT20/30)

139 General Electric (GE) USA

8959 DOOSAN /SKODA POWER Czech Republic Model MTD40C with a maximum LSB of 27” only

8671 Fuji Electric Co, Ltd Japan Reheat Steam •HMN Series – Three & four cylinder type Output Range 200 MW – 350 MW •KN Series – 2 casing combined HP and IP and separate LP Turbine. Output range 100MW -350MW•SCRH – Single Casing axial Exhaust for Combined Cycle Power Plant. Outpu

6538 TOSHIBA CORPORATION Japan




Japan


Korea - LTSA shall be provided for sub-critical SteamTurbine.

5104 HITACHI Japan

Qualified For STEAM TURBINE NON-RETURN VALVES


5119 ADAMS Germany

5120 KSB Germany

5125 SEMPELL Germany

Qualified For STEEL POLES, TUBULAR UP TO 230 KV




12 May, 2012 Page 159 of 181

7281 PETIT JEAN France

7282 SUMMIT MANUFACTURING USA

7283 TECHNOPALI Italy

7284 VALMONT USA

Qualified For Stop Log Gates


9762 Hyorim Industries Inc. Korea Channel width: 1,000 to 6,000 mmWater depth: 1,000 to 15,000 mmFlow capacities: 45000 m3/h

9767 HUBERT STAVOREN B.V. Netherlands Channel width: 1,000 to 6,000 mm , Water depth: 1 to 15 mFlow capacities: 2,500 m3/h - 80, 000 m3/h

Qualified For Strainer


9543 SMART VALVE COMPANY (SVC) Korea

Qualified For STRUCTURAL STEEL / PRE-ENGINEERED BUILDINGS




8122 ZAMIL STEEL Saudi

8124 SAUDI BUILDING SYSTEM (BUTLER) Saudi

8125 Al Zamil Heavy Ind Saudi


9131 Energya Steel Solutions Saudi All engineering and design works to be done by the EPC contractor

8128 AIC Saudi


4904 AIC Saudi



8047 SAUDI BUILDING SYSTEM Saudi

Qualified For Structural Steel Erection For ST Hall, pipe rack, HV Cable rack, electrical and control b






12 May, 2012 Page 160 of 181


8163 SHAMRANY INDUSTRIAL GROUP/BOURNE

Saudi

8229 SAUDI METIN LTD. Saudi



Qualified For SUBSTATION STEEL STRUCTURE (LATTICED)



7267 AL ZAMIL STEEL Saudi


7272 GEYARD FOR COMMERCE AND IMPORT CO.

Saudi



7279 NAJEM Saudi

Qualified For SUMP PUMPS (SUBMERSIBLE)


5094 FLOWSERVE na



5266 LOWARA na

5275 FLYGT CORPORATION na

5276 WARMAN na

5277 NAGEL na


Qualified For SURGE ARRESTERS, STATION CLASS UP TO 380 KV


6502 ABB Germany

6609 AREVA France





7332 BOWTHORPE United Kingdom

12 May, 2012 Page 161 of 181

7333 COOPER (MCGRAW-ED) USA

7335 ELPRO INTL. LTD India

7336 OHIO BRASS USA

7337 TRIDELTA Germany

7338 ALSTOM T&D France, United Kingdom

7339 AE POWER Japan

Qualified For Suspended Ceilling System


8210 USG MIDDLE EAST LTD. Saudi

Qualified For SWITCHBOARD, INDOOR, LOW VOLTAGE









USA None

9009 WESCOSA Saudi Pow-R-Line models under license from Cutler-Hammer


USA None

8824 EPS Saudi under the licence from merlingerlin/squareD

Qualified For SWITCHGEAR, MANUALLY OPERATED PAD MOUNTED: LOAD INTERRUPTED SWITCHES, CIRCUITBREAKERS AND FUSES - 1 kV THROUGH 15 kV


8767 POWELL-ESCO USA SF-6 Load Break Switches only


Saudi Merlin-Gerin Ringmaster & Genie models (Under License from Merlin-Gerin)

8764 ARABIA ELECTRIC, LTD. Saudi Siemens models. (Under License from Siemens)

8766 G&W ELECTRIC CO. USA SF-6 Load Break Switches only

Qualified For SWITCHGEAR, METAL-ENCLOSED LOW-VOLTAGE, INDOOR


8921 ABB Saudi -LV Switchgear (MNS Series ).

9273 Nour Industries Saudi - Siemens Sivacon.- Ten (10) Years extended warranty.

12 May, 2012 Page 162 of 181

Qualified For SWITCHRACK, OUTDOOR – LOW VOLTAGE


9014 ARABIAN POINT EIGHT POWER Saudi None

9019 JEDDAH ELECTRICAL DISTRIBUTION Saudi None

9018 WESCOSA Saudi None


9016 ELECTROMACH B.V. Netherlands None

9015 CROUSE-HINDS / COOPER USA None

9013 ARABIA ELECTRIC, LTD. Saudi None

Qualified For SYNCHRONOUS GENERATORS



6553 GENERAL ELECTRIC PETERBOROUGH, ON, CANADA

6745 BRUSH United Kingdom

5079 ALSTOM POWER United Kingdom

Qualified For T/L STEEL STRUCTURE (LATTICED) UP TO 380KV



7268 AL ZAMIL STEEL Saudi




7280 AL-SALAM Saudi

Qualified For TANK GAUGING EQUIPMENT – RADAR


7832 ENRAF BV DELFT, NL

7834 SAAB TANK CONTROL GOTEBORG, SE

Qualified For TANK GAUGING EQUIPMENT – SERVO AND FLOAT


6361 L & J TECHNOLOGIES USA

7831 ENRAF BV DELFT, NL

7833 VAREC, INC USA

Qualified For TANK: CONDENSATE / WATER STORAGE


12 May, 2012 Page 163 of 181




4864 ARABIAN TANK & VESSEL Saudi


Qualified For TANK: CYLINDRICAL; STEEL; SHOP ERECTED


8421 Al-Ayash Est. Saudi Up to 10,000 m3(Fix Roof Tank)





Saudi


Korea

4839 ARABIAN CBI TANK Saudi

4841 ARABIAN METAL PRODUCTS ORGANIZATION

Saudi

4842 AL HIDADA COMPANY LIMITED Saudi



Saudi


4847 SAUDI ARABIAN FABRICATED METALS IND.

Saudi

4848 METSCCO STEEL CONSTRUCTION CO. LTD.

Saudi - Engineering , Procurement and construction for fuel tanks.

- Civil work should be from SEC approved subcontractors list.


Saudi

4851 AL-GASWA SUPPORT CO., LTD. Saudi



Saudi



Saudi

12 May, 2012 Page 164 of 181

Qualified For TANK: FLAT BOTTOM; FOR PETROLEUM PRODUCTS OR WATER STORAGE, AND A


8734 PETROL STEEL CO. LTD. Saudi Atmospheric Tanks and associated pipe connections for fuel oil,distillate oil crude oil,gas and water.

9246 Al-Ayash Est. Saudi Up to 10,000 m3(Fix Roof Tank)




Saudi


Korea

4840 ARABIAN CBI TANK Saudi

4843 AL HIDADA COMPANY LIMITED Saudi

4849 METSCCO STEEL CONSTRUCTION CO. LTD.

Saudi - Engineering , Procurement and construction for fuel tanks.

- Civil work should be from SEC approved subcontractors list.

4852 MITSUBISHI HEAVY INDUSTRIES, LTD. MARITIME INDUSTRIAL GROUP

Japan



Saudi

Qualified For TAP POSITION TRANSDUCERS


6627 AREVA STAFFORD, ENGLAND

Qualified For TELE PROTECTION SYSTEM (TPS)


6508 ABB SWEDEN/ SWITZERLAND

6619 AREVA France


Qualified For TEMPERATURE INDICATORS



10005 WIKA Germany



12 May, 2012 Page 165 of 181

7777 AMETEK, INC. (U.S. GAUGE PMT) 820 Pennsylvania Blvd. Feasterville, PA 19053


Saudi


Germany

Qualified For TEMPERATURE SWITCHES – MECHANICAL


7668 SOR, INC USA


7797 CUSTOM CONTROL SENSORS, INC United Kingdom

7799 DRESSER INDUSTRIES, ASHCROFT INSTRUMENT DIV

Saudi

7801 MERCOID CORP USA


Qualified For TEMPERATURE TRANSMITTERS


9491 WIKA Germany







7774 SMAR USA

7841 SIEMENS AUTOMATION Saudi

7842 REUGER Switzerland

7843 THERMO EST France

7844 TEMP PRO USA

Qualified For TERMINAL BLOCK


7448 ENTRELEC France

7449 PHOENIX Germany

7450 WEIDMULLER Germany

Qualified For TEST EQUIPMENT


12 May, 2012 Page 166 of 181

7504 ACTERNA USA

7505 ANDO ELECTRIC CO. LTD Japan

7506 IFR 10200 WEST YORK STREET

7507 PHILIPS United Kingdom

7508 ROHDE & SCHWARZ D-8000 MANCHEN 80, MUHLDORFSTABE 15 POSTFACH 801469

7509 TREND Spain

7510 WANDEL & GOLTERMAN GMBH CO. Germany

7511 HEWLETT PACKARD CO. USA

Qualified For THERMAL FLOWMETERS


7752 FLUID COMPONENTS, INC USA

7753 EMERSON- BROOKS INSTRUMENTS Veenendaal, NL

7754 KURZ INSTRUMENTS USA

Qualified For Thermal Insulation


9778 INSULCO Lebanon

Qualified For THERMAL INSULATION FOR BOP & INSULATION & LAGGING MTL. FOR BOILERS


9147 TechTowers for Power & Telecom ,Aarding Thermal Acoustics

The Neherlands Ony for Gas Turbines

6447 WILLICH Germany

6448 INSULTEC USA

6451 INECO UAE

Qualified For THERMAL INSULATION FOR STEAM TURBINE


8295 OKI Germany

8296 R&M Willich Germany

6450 INSULTEC USA

6453 INECO USA

6455 OKI Germany

6458 R&M WILLICH Germany

12 May, 2012 Page 167 of 181

Qualified For THERMOCOUPLES






7853 THERMO ELECTRIC CO, INC USA

7854 GAY ENGINEERING AND SALES CO. (GAYESCO)

HOUSTON, TX

7855 CONAX BUFFALO CORPORATION USA

7856 OKAZAKI MANUFACTURING CO Chuo-Ku

Qualified For THERMOWELL




7857 OKAZAKI MANUFACTURING CO Chuo-Ku

7859 ABB AUTOMATION PRODUCTS GMBH Germany


7866 THERMO ELECTRIC EUROPE BV OUDE MEER, NL

7868 DRESSER AL-RUSHAID VALVE AND INSTRUMENT

Saudi


Germany

7870 THERMO-COUPLE PRODUCTS COMPANY

USA

Qualified For TIME-DOMAIN-REFLECTOMETRY LEVEL TRANSMITTERS



7835 MAGNETROL INTERNATIONAL NV ZELE, BE

7836 ROSEMOUNT/SAUDI FAL COMPANY Saudi

Qualified For TRANSDUCERS


7437 CEWE INSTRUMENTS AB SWEDEN

7438 ENERDIS France

7439 TILLQUIST SWEDEN

Qualified For TRANSDUCERS - SIGNAL CONVERSION


12 May, 2012 Page 168 of 181


Saudi






8006 MOORE PRODUCTS (SIEMENS) Germany

Qualified For TRANSFER SWITCH, AUTOMATIC, INDOOR, LOW VOLTAGE



8851 RUSSELECTRIC USA None

8846 AUTOMATIC SWITCH CO. (ASCO) USA None


8848 GE ZENITH USA None

8850 LAKE SHORE USA None


8853 Emerson USA None

9030 AUTOMATIC SWITCH CO. (ASCO) USA None


9032 GE ZENITH USA None

9033 KOHLER USA None

9035 RUSSELECTRIC USA None

9034 LAKE SHORE USA None

9037 WESTINGHOUSE USA None

8849 KOHLER USA None

Qualified For TRANSFORMERS: DRY


6561 ALSTOM GRID TURKEY

6574 WESCOSA Saudi

6772 ABB TURKEY

Qualified For TRANSMITTER, PNEUMATIC: DIFFERENTIAL PRESSURE


7638 FISHER (EMERSON) – PREFERRED USA

12 May, 2012 Page 169 of 181

7639 YAMATAKE Japan

Qualified For TRANSMITTER, PNEUMATIC: LEVEL DISPLACEMENT




7640 YAMATAKE Japan

Qualified For TRANSMITTER, PNEUMATIC: PRESSURE




7641 YAMATAKE Japan

Qualified For TRANSMITTER, PNEUMATIC: TARGET METER



Qualified For TRANSMITTER, PNEUMATIC: TEMPERATURE



7644 FISHER-ROSEMOUNT (EMERSON) USA

Qualified For TRANSMITTER, PNEUMATIC: UPS


7645 BEST na

7646 SCI (AMETEK) USA

Qualified For TRANSMITTER; LIQUID LEVEL; DISPLACER




6418 FISHER CONTROLS INC USA




7821 FISHER ROSEMOUNT LTD BUDAPEST, HU

7822 DRESSER PRODUCTS INDUSTRIELS France

7823 DRESSER INDUSTRIES Saudi

Qualified For TRANSMITTERS, ELECTRONIC: DIFFERENTIAL PRESSURE


12 May, 2012 Page 170 of 181


Qualified For Trap


10023 SMART VALVE COMPANY (SVC) Korea

Qualified For TUBE CLEANING SYSTEM INCL. DEBRIS FILTER


9241 Brackett Green Ltd./OVIVO United Kingdom No limitation.

9242 KSB Seawater No limitation.

5705 TAPROGGE Germany

5034 GEA Germany

5270 TECHNOS France

Qualified For TUBE SHEET: ANY METAL





Saudi






Korea




4971 OFFICINE LUIGI-RESTA S.P.A. SCANZORDSCIATE, IT

4975 UNIT SUPERHEATER ENGINEERING, LTD.

United Kingdom


USA




4993 HITACHI, LTD. KASADO WORKS Japan


12 May, 2012 Page 171 of 181



Qualified For TUBING; METALLIC


6431 AVESTA POLARIT STAINLESS TUBE AB FAGERSTA, SE

6432 SANDVIK MATERIALS TECHNOLOGY AB

SANDVIKEN, SE

6433 SANDVIK STEEL CANADA Canada

6434 SANDVIK TUBULAR PRODUCTS USA

6435 HANDY & HARMAN INCORPORATED USA

6436 THE INDIAN SEAMLESS METAL TUBE Pune, IN


5559 AVESTA SANDVIK TUBE AB STORFORS, SE

5645 SCHOELLER-BLECKMANN TERNITZ, AT

5650 ASSOCIATED TUBE INDUSTRIES MARKHAM, CA

Qualified For TURBINE I+C SYSTEM


7522 ALSTOM POWER-CENTRAL France

7523 ABB POWER AUTOMATION Switzerland

7524 SIEMENS-AG Germany

Qualified For TURBINE INTERNAL TUBES (TURBINE ISLAND PIPEWORK)


5703 EHR (MANNESMANN) Germany

5704 ROBA Germany

Qualified For TURBINE ROTOR


5078 ALSTOM POWER Switzerland

Qualified For TURBINE STATOR HP/IP/LP (INNER & OUTER CASING)



Qualified For TURBINE SUPERVISORY INSTRUMENT UNIT



Qualified For ULTRASONIC FLOWMETERS; FLOW METER: ULTRASONIC; LIQUID, GAS AND FLARE


7736 KROHNE Germany

12 May, 2012 Page 172 of 181

7738 GE PANAMETRICS Shannon, IE

7739 ROXAR FLOW MEASUREMENT (PREV. FLUENTA)

Bergen, NO

7740 INSTROMET INTERNATIONAL NV Essen, BE


7744 SICK-ENGINEERING GMBH Germany

Qualified For UNINTERRUPTIBLE POWER SUPPLY SYSTEM


9407 CEG Elettronica Industriale S.p.a Italy 1. UPS Model AC U1 / AC U3 Series.Series.2. All parts & components shall be procured from CEG group-Italy manufactured. 3. Ten years extended warranty shall be applicable to:- All supplies directly or through supplier.- Design defects & manufacturing

9829 BORRI S.P.A Italy - UPS Model E 2011e-Extend warranty shall be applicable to all supplies dirctly or thrugh supplier.-Ten (10) years warranty shall be applicable for first project and reduced yearly for subsequent project awards.

6848 CYBEREX USA

6850 GUTOR ELECTRONICS LTD. WETTINGEN, SWITZERLAND

6852 POWERWARE USA

6913 SOLID-STATE CONTROLS INC. (AMETEK)

USA

6914 ALCATEL / AEG SAFT Germany


Qualified For UNIT AUXILIARY TRANSFORMER (UAT)


8781 AREVA Germany No limitation for capacity and voltage.

8787 EMCO Ltd. India No limitation for capacity and voltage.

8786 ABB Germany No limitation for capacity and voltage.


Korea No limitation for capacity and voltage.

8784 ELIN Austria No limitation for capacity and voltage.

9196 TBEA China Up to 50 MVA,132 KV.

12 May, 2012 Page 173 of 181

8782 ALSTOM GRID TURKEY No limitation for capacity and voltage.


Belgium - Two/Three windings only.- In case of two LV windings, it shall be radial split windings.


Hungary - Two windings only

8780 ABB SWEDEN-ludvika

No limitation for capacity and voltage.


8778 SIEMENS Germany No limitation for capacity and voltage.

8791 Toshiba Corporation Japan

8792 SMIT TRANSFORMER B.V. Netherlands

8783 ABB TURKY .No limitation for capacity and voltage.

9552 Fortune Electric Company Taiwan For the first order of each rating and type,the design of transformer to be vetted and approved by Hitachi.Compliance of this shall be submitted to SEC for approval & record.


9189 BEST TURKEY No limitation for capacity and voltage.only of any two winding transformer.


8908 Alfanar Trading. Saudi Up to 630 KVA,13.8KV. With cooling fins

8713 SHIHLIN ELECTRIC & ENGINEERING CORP. (SEEC)

Taiwan Two winding transformer.

Qualified For UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


6808 CG Power Systm Belgium NV Belgium

6838 ABB (BBC SECHERON) SWITZERLAND, GENEVA

Qualified For VACUUM PUMPS


5272 GRAHAM MANUFACTURING na

5273 NASH USA

5274 NITECH USA

Qualified For VALVE ACTUATORS – ELECTRIC; ELECTRICAL ACTUATORS FOR CONTROL APPLIC


9178 DREHMO GmbH Germany

6767 BIFFI SPA FIORENZUOLA D'ARDA , IT

12 May, 2012 Page 174 of 181

7471 ROTORK CONTROLS, INCORPORATED USA

7473 REXA/KOSO AMERICA USA

7474 E.I.M. COMPANY, INC USA

7475 LIMITORQUE CORP USA

7476 AUMA MULLHEIM, DE

7477 ROTORK CONTROLS LTD United Kingdom

Qualified For VALVE ACTUATORS – ELECTRIC; ELECTRICAL ACTUATORS FOR ESD/WELLHEAD A



7479 ROTORK CONTROLS, INCORPORATED (EH)

USA

7480 CAMERON USA

7481 HALLIBURTON ENERGY SERVICES (LEO)

USA

Qualified For VALVE ACTUATORS; HYDRAULIC AND ELECTRO/HYDRAULIC


6411 DRESSER ITALIA SPA VOGHERA, IT


7467 BETTIS ACTUATORS AND CONTROLS USA

7469 ROTORK FLUID SYSTEMS SRL Italy

7470 ROTORK CONTROLS, INCORPORATED USA

7472 REXA/KOSO AMERICA USA

Qualified For VALVE MANIFOLDS FOR INSTRUMENT-PROCESS INTERFACE


9393 HY-LOK Korea

8022 TYCO-ANDERSON GREENWOOD INSTRUMENTATION

USA

8024 HOKE, INC USA

8026 OLIVER VALVES LIMITED United Kingdom


8032 VESTA-PGI-MANUFACTURING USA

Qualified For VALVE: INSTRUMENT


9546 HY-LOK Korea Stainless Steel Only

7539 SWAGELOK, CO. - PREFERRED USA

12 May, 2012 Page 175 of 181

8021 TYCO-ANDERSON GREENWOOD INSTRUMENTATION

USA

8023 HOKE, INC USA

8025 OLIVER VALVES LIMITED United Kingdom

8027 MERWEDE VALVES Hardinxveld, NL


8031 WHITEY CO. – PREFERRED VALVES USA

Qualified For VALVE; VENT PRESSURE VACUUM



6360 L & J TECHNOLOGIES USA

6362 TYCO – WHESSOE (UK FACTORY) United Kingdom

6363 TYCO – VAREC (USA FACTORY) USA

Qualified For VALVES (Gate, Globe, Check, Ball, Butterfly)


9331 PK valve Korea 1-Gate valve Class 150-25002- Globe valve Class 150-15003-Swing/CH valve Class 300-2500

Qualified For Valves for F.O booster pump station


8202 DSI VALVES USA

8204 STOCKHAM VALVE United Kingdom

8205 Walthon Weir Pacific Spain

8206 RAIMONDI VALVES Italy

8207 AFT (Advanced Flow Technology srl) Italy

8201 NELES-JAMESBURY USA

8203 SAUDI VALVES MANUFACTURER Saudi

Qualified For VARIABLE FREQUENCY DRIVES


6564 ALLEN-BRADLEY na

6566 CUTLER-HAMMER na

6729 SAFTRONICS na

6730 DANFOSS na

Qualified For Vendor approved for TIAK system


8372 Howden U.S.A / England

12 May, 2012 Page 176 of 181

Qualified For VIBRATION DAMPER



7232 ISELFA Italy

7238 PFISTERER SWEDEN


7248 DAMP Italy

7249 SALVI Italy

Qualified For VIBRATION MONITORS - SEISMIC TYPE






7963 MERTIX INSTRUMENT COMPANY USA

Qualified For VIBRATION MONITORS; NON-CONTACTING TYPE




7961 ROCKWELL AUTOMAITON-ENTEK (IRD)

USA

7964 BRUEL & KJAER VIBRO A/S NAERUM, DK

Qualified For VOLTAGE TRANSDUCERS & WATT/VARS TRANSDUCERS



7442 ABB (ASEA INC.) MONTREAL, CANADA

7443 TRANSDATA USA

Qualified For Waste Water System


8739 Hyorim Industries Inc. Korea - Oily waste water systems capacity up to: 150 m³/h - Neutralization systems up to : 150 m³/h - Chemical waste water systems up to : 150 m³/h

Qualified For WATER TREATMENT SYSTEMS (DEMIN)


12 May, 2012 Page 177 of 181









5195 US FILTER na

5197 GE WATER TECHNOLOGIES (GLEGG) na

5199 WATER AND POWER TECHNOLOGIES na

5201 ECOLOCHEM na

5203 METITO na

5209 GRAVER WATER CO. na

5210 HUNGERFORD & TERRY, INC. na

Qualified For WATTHOURS/VARHOURS TRANSDUCERS


7440 MITSUBISHI ELECTRIC Japan

7441 SCIENTIFIC COLUMBUS USA

Qualified For WELLHEAD SHUT DOWN SYSTEMS


7972 E PRODUCTION SOLUTIONS USA

7974 CAC LTD United Kingdom

12 May, 2012 Page 178 of 181

7975 HALLIBURTON ENERGY SERVICES USA

Qualified For WOOD POLES, ANSI CLASS HI – H 3


7285 ATLANTIC WOOD IND. USA


7289 KOPPERS INDUSTRIES USA

7291 STALLWORTH TIMBER USA

7293 STELLA JONES INC. Canada

7295 TAYLOR LUMBER (NORTH PACIFIC GROUP)

USA

7297 CAHABA PRESSURE TREATED FOREST PRODUCT (NORTH PACIFIC GROUP)

USA

Qualified For WOOD POLES, ANSI CLASS I - 4


7286 ATLANTIC WOOD IND. USA


7290 KOPPERS INDUSTRIES USA

7292 STALLWORTH TIMBER USA

7294 STELLA JONES INC. Canada

7296 TAYLOR LUMBER (NORTH PACIFIC GROUP)

USA

7298 CAHABA PRESSURE TREATED FOREST PRODUCT (NORTH PACIFIC GROUP)

USA

Qualified For XLPE CABLE – 230 K V


6493 ABB Germany




Japan







12 May, 2012 Page 179 of 181

7089 FUJIKURA Japan

Qualified For XLPE CABLE –33 & 34.5 KV







7013 DUBAI CABLE CO. UAE


Japan


7030 FUJIKURA CABLES Japan


7047 MKM HUNGARY


Qualified For XLPE CABLE -380 KV


6494 ABB Germany




Japan




7100 NKT Germany


7112 VISCAS FUJIKURA Japan

Qualified For XLPE CABLES – 110 TO 132 KV


6492 ABB Germany




12 May, 2012 Page 180 of 181



Japan








7088 FUJIKURA Japan

Qualified For XLPE CABLES – 36 KV


9405 Bahra Advanced Cable Manufacure Co.Ltd,

Saudi Insulated single/three core aluminum or copper power cables

Qualified For XLPE CABLES – 69 KV


6491 ABB Germany




Japan


7031 FUJIKURA CABLES Japan


7048 MKM HUNGARY

7053 ALCATEL France





Qualified For Y and Basket Strainer


9153 Crane Valve Group / Krombach Germany

12 May, 2012 Page 181 of 181

Date post:	28-Jul-2018
Category:	Documents
Upload:	donhan
View:	261 times
Download:	2 times

SAUDI ELECTRICITY COMPANY Engineering and Generation...

Documents