SAUTER EGP100.Measures differential pressure precisely and is easy to fi t.

2

Precision in every detail: for a complete energy-effi cient solution with the SAUTER EGP100.

A versatile range of applications combined with absolute accuracy.

Anyone with a commitment to energy effi ciency thinks in integrated terms. And anyone who wants to be successful at energy effi ciency will also examine every detail of the system. The SAUTER EGP100 incorporates the lengthy experience and quality awareness that we have acquired from devising complete solutions and from developing the instruments required to implement them. This trans-ducer for differential pressure can be used wherever there is a call for pressure monitoring with uncompromising precision. Examples include:• Air-conditioning• Medical technology• Environmental technology• Laboratories and clean rooms

Exceptional requirements? Not a problem.

The accurate measurement of positive, negative or differential pressure in gases has been optimised in the new SAUTER EGP100 so that it can bring all its strengths to bear when monitoring fi lters, ventilation ducts and ventilation sys-tems – even when the air contains dust or is contaminated with chemicals. Ad-ditional benefi ts include control of frequency converters to regulate ventilation and level monitoring for fl uids.

3

A little large at fi rst sight, but on close inspection it’s just right.

Exact measurement using a double-membrane pressure sensor:

this high-calibre sensor will even detect the most minimal air

fl ows or differential pressures. A differential capacitive method

of measurement is used to evaluate the differential pressure and

make it available in the form of a linear electrical signal. Another

advantage of the membrane sensor is that it can be fi tted in any

position.

The zero point can be set at any time thanks to the inte-

grated potentiometer. The SAUTER EGP100 is also supplied

ex works with a calibration certifi cate. The variable fi lter

constant ensures that the output signal remains stable when

measurement is diffi cult.

Opening and positioning is easy. The cover closure with its

hook and the latch on the housing cover ensure simple and

safe handling for fi tting and maintenance. Minimum time

and effort are required, and no additional tools are needed.

IP 65 is included.

Servicing is easy thanks to the automatic cable feed, which

saves time and expense.

The choice is yours. You can mount the SAUTER EGP100 to

a wall or onto a top-hat rail as per the DIN standard: both

are possible.

Sen

sor

Pote

ntio

met

erH

ousi

ng

cove

rC

onne

ctio

nFi

ttin

g

Systems

Components

Services

Facility Management

AU ZU

ABFO

CI CIDO DODI DIAO AOAI AI

1 11

PDPD

1

LL

113

121

13

NN

1

NN

1

Rev.Rev.

121

13

NN

1

NN

1

Rev.Rev.

1

H%H%

1 11

T

1

T

1

H%

2

T

1

H%

1

A-0

-FU

7001

1310

003

W2

EGP100 transducer for di� erential pressure

Type EGP100F301 EGP100F401

Power supply 24 V ~/= 24 V ~/=

Measuring range 0...150 Pa 0...300 Pa

Power consumption 24 V ~ 24 V =

1.0 VA0.4 W

1.0 VA0.4 W

Parts in contact with media PC/ABS blend, MQ, CuSn6, FR4 PC/ABS blend, MQ, CuSn6, FR4

Output signal 0...10 V, load > 10 Ωk 0...10 V, load > 10 Ωk

Time constant, variable 0.05...2 sec. 0.05...2 sec.

Positional infl uence ± 1% FS 150 Pa ± 0.75% FS 300 Pa

Reproducibility 0.2% FS 0.2% FS

Non-linearity 1% FS pressure-linear 1% FS pressure-linear

Zero point stability < 0.3% FS < 0.3% FS

Ambient temperature 0...60 °C 0...60 °C

Type of protection IP 65 IP 65

Example of use

EGP100

EGP100

www.sauter-controls.comSubject to change. © 2009 Fr. Sauter AG