2 3
B12: B16: B17: B18:
B12, B16, B17, B18.
Ag
ric
ult
ura
l ty
res
• Special reinforced edges between the tyre ribs increase its rigidity and compactness which make the tyres suitable for trans-porting higher loads.
• Good handling owing to directionally curved ribs.
• Thanks to the narrow and relatively thinly distrib-uted ribs, the grip on soft ground, such as soil and clayey earth, is good and the ride is safe on steep slopes as well.
• The shape of the tyre itself contributes to efficient self-cleaning.
• A tyre with thinly arranged but wide ribs for use on softer surfaces, especially on sandy and similar ones.
• The expanded central part of the rib ensures excellent course stability.
• Densely arranged and with slightly broader ribs along the tyre tread that absorb vibrations while travelling.
• Due to the rib width tyre wear is reduced, especially when used on harder sur-faces.
INTRODUCTION
Agricultural tyres:
The company SAVA VELO manufactures tyres for agricultural machinery, garden, implement and industrial tyres. The high qual-ity of products based on a tradition of manufacturing going back 80 years conforms to rigorous domestic and international criteria, the end product being a combination of superb construction and excellent driving characteristics on different surfaces.
Many years of experience in development along with close co-oper-ation with vehicle manufacturers ensure the continual development of new products and improvements in already existing solutions.
Thanks to the advanced technical procedures and manufacturing flexibility we are able to meet the requirements of customers and adapt product specifications to conform to their special needs.
In the future too we will follow a clear development policy and adapt ourselves to meet customer requirements. We are aware of the importance of long-term business relations; therefore we want to remain your reliable partner.
The range of tyres used on drive wheels of smaller agri-cultural machinery such as motor cultivators, mowing machines, various attach-ments, etc.
2 3
B15:
13x5.00-6 2PR B12 TL/TT 119 334 3.50-6 125 125 1.50 20 4.00-6510258 4PR 185 185 2.25 TR13, TR87 90/90
75654 4.00-8 2PR B12 TT 105 425 3.00 109 155 1.50 30 3.50/4.00-854592 4PR 160 230 2.75 TR13, TR87 90/90 51448 4.00-10 2PR B12 TT 109 470 3.00 128 185 1.50 30 4.00-1081029 4PR 185 265 2.75 TR13
80780 4.00-12 2PR B12 TT 109 526 3.00 150 212 1.50 30 4.00-1254664 4PR 212 300 2.75 TR13, TR87 90/90
54872 5.00-12 2PR B12 TT 145 570 4.00 180 257 1.20 30 5.00-12 81014 4PR 265 375 2.25 TR13
63864 3.50-6 2PR B16 TT 96 353 2.50 80 112 1.50 30 4.00-663111 4PR 115 165 3.00 TR13, TR87 90/90
64019 3.50-8 2PR B16 TT 96 395 2.50 93 132 1.50 30 3.50/4.00-881181 4PR 121 185 3.00 TR13, TR87 90/90
72907 5.00-10 2PR B16 TT 129 520 3.00 165 243 1.25 30 5.00-1063865 4PR 243 355 2.25 TR13 68015 5.00-12 2PR B16 TT 135 570 3.00 180 257 1.25 30 5.00-1262242 4PR 265 375 2.25 TR13
78781 4.0-10 2PR B17 TT 111 460 3.50 140 195 1.50 30 4.00-10 4PR 195 272 2.75 TR13
66261 5.0-10 2PR B17 TT 135 510 3.50 180 257 1.25 30 5.00-1065257 4PR 257 365 2.25 TR13 67404 6.50/80-12 2PR B18 TT 165 604 5.00 243 345 1.20 30 5.00-1275213 4PR 355 500 2.40 TR13 3.50-6 2PR B15 TT 96 343 2.50 112 1.50 30 4.00-663110 4PR 165 3.00 TR13, TR87 90/90
63112 3.50-8 2PR B15 TT 96 388 2.50 132 1.50 30 3.50/4.00-863723 4PR 185 3.00 TR13, TR87 90/90
• Features a special directionally ribbed tread pattern with a reinforced centre rib for good handling, especially on soft grounds.
• Used mainly on auxiliary wheels fitted on the front axles of smaller agricultural machinery.
Te
ch
nic
al
spe
cif
ica
tio
ns
Code Tyre dimension
Carcass rigidity
Tread pat-tern desig-
nation TL/TT
Tyre width [mm]
Outer diameter
[mm]
Rim Load [kg]
Inflation pressure
[bar]
Maxi-mum
speed [km/h]
Correspondingtube
ValveDrive wheel
Driven wheel
4 5
B19: G1 GARDEN:
79755 11x7-4 4PR B19 TT 183 270 6.00 425 3.10 30
13x5.00-6 4PR B19 TL/TT 121 320 3.50 185 2.25 20 4.00-6 TR13, TR87 90/90
72236 15x6.00-6 4PR B19 TL/TT 155 355 4.50 257 2.00 20 15x6.00-6508429 6PR 355 3.00 TR13 10PR 475 4.25
70168 16x6.50-8 4PR B19 TL/TT 172 403 5.375 265 2.00 20 16x6.50/7.50-8508382 6PR 335 3.00 TR13
502308 13x5.00-6 2PR G1 TL/TT 122 320 3.50 125 1.50 20 4.00-6504488 4PR 185 3.00 TR13, TR87 90/90
504243 18x8.50-8 2PR G1 TL/TT 214 450 7.00 180 0.80 20 18x8.50/9.50-8508092 325 2.00 TR13
• A relatively smooth tread pattern with narrow ribs on wide profile tyres especially suitable where the terrain must not be damaged (undergrowth and tree roots); also pre-vents plants wrapping around the tyre.
• Slightly longitudinally shaped grooves prevent skidding.• Medium inflation pressures (0.5 to 3 bar) are
recommended to prevent sinking into soft and wet ground.• A wide range of applications: different types of machines
from tedders to mowers, attachments on agricultural machinery as well as auxiliary equipment for transport at railway stations and airports. Used on vehicles for maintaining and cutting grassy surfaces. For use on the drive wheels of smaller vehicles on flat or slightly inclined slopes.
Implement and garden tyres:
Note:TT − TUBE TYPE TYRE − used with a tubeTL − TUBELESS TYRE − used without a tube
Recommended for TL tyre fitting: more attention is advised during the fitting procedure in order not to damage the tyre bead.
• Cube-shaped tread pattern ensures a good grip even on softer surfaces.
• A medium inflation pressure (0.5 bar to 1.5 bar) is recommended to prevent damage to cultivated surfaces; for vehicles where loads are high an inflation pressure of 1.5 to 3 bar is recommended.
• Due to the wide contact surface soil compaction is reduced.
• Possible use on the drive and auxiliary wheels of smaller tractors and machines in parks and sports grounds as well as in farming and forestry.
Imp
lem
en
t a
nd
ga
rde
n t
yre
s
Code Tyre dimension
Carcass rigidity
Tread pattern
designation TL/TT
Tyre width [mm]
Outer diameter
[mm]
Rim Load [kg]
Inflation pressure
[bar]
Maxi-mum speed [km/h]
Correspondingtube
Valve
4 5
B14:
505996 3.50-8 46J B13 TT 92 386 2.50 170 2.5 100 3.50/4.00-8 TR87 90/90, TR13
57143 4.00-8 C 66J B13 TT 108 415 3.00 300 3.5 100 3.50/4.00-8 TR87 90/90, TR13
56774 4.00-8 C 71J (6PR) B13 TT 108 415 3.00 345 4.25 100 3.50/4.00-8 TR87 90/90, TR13 69999 3.50-10 51J B14 TT 92 437 2.50 195 3.25 100 3.50/4.00-860858 59J (4PR) 243 TR87 90/90, TR13
64634 4.00-10 69J (4PR) B14 TT 108 466 3.00 325 3.50 100 3.50/4.00-10 76059 74J (6PR) 375 TR87 90/90, TR13
508369 4.80/4.00-8 70N B61 TL 115 514 2.50-8 335 5.00 140
508795 4.50-10 76N B61 TL 135 495 3.50-10 400 4.25 140
513026 5.00-10 72N B61 TL 149 524 3.50-10 355 3.50 140 508797 79N 525 437 4.25 140
B13:
B61:
• Rough tread pattern ensures a good grip even on dirt roads.
• Tyre tread pattern is self-cleaning.• Construction and compound ensure silent running and a
long service life.
• Tread pattern suitable for asphalt and dirt roads ensures a good grip and absorbs vibrations during rides.
• The rougher part of the lateral contact surface with intermediate grooves drains water.
• The special tread pattern and supporting compound with high lateral stability ensure a comfortable ride and smooth running.
Tyres for trailers:
Ty
res
for
tra
ile
rs
Code Tyre dimension
Loadindex,speedsymbol
Tread pat-tern desig-
nation TL/TT
Tyre width [mm]
Outer diameter
[mm]
Rim Load [kg]
Inflation pressure
[bar]
Maximum speed [km/h]
Correspondingtube
Valve
• Main use of tread pattern B61 is on tarmac roads in dry and also in wet.
• Tyre can be used on light car trailers, which do not exceed speed 140 km/h.
6 7
V-5501:
512107 4.00-6 2PR V-5501 TT 102 343 2.50-6 150 2.10 30 4.00-6512113 4PR 210 2.50 TR13512114 6PR 270 3.50
512116 3.50-8 2PR V-5501 TT 90 373 2.50-8 150 2.10 30 3.50/4.00-8512117 4PR 180 2.50 TR13
512118 4.00/4.00-8 2PR V-5501 TT 101 399 3.75-8 165 2.10 30 3.50/4.00-8512119 4PR 220 2.50 TR13
• Narrow ribbed tread pattern with longitudinal grooves for good directional stability.
• Tyre rigidity and a long service life are due to the tyre construction and compound.
• These tyres are suitable especially for wheelbarrows and different carts as well as auxiliary wheels for various attachments used in farming.
Ty
res
for
wh
ee
lba
rro
ws,
att
ac
hm
en
ts a
nd
ca
rts
Tyres for wheelbarrows, attachments and carts:
Testing
Tests in Sava central laboratory (tyre wear, ozone, physical characteristics of compounds, cord fabrics and bead wire).
Testing according to international standards: E T R T O, ECE, DOT.
Code Tyre dimension
Carcass rigidity
Tread pattern
designation TL/TT
Tyre width [mm]
Outer diameter
[mm]
Rim Load [kg]
Inflation pressure
[bar]
Maxi-mum speed [km/h]
Correspondingtube
Valve
6 7
TR87 - 90/90 V6-02-1TR 13
V2-01-1 7774 TR13 38G/11,5
/ 7785 TR87 33G
V6-02-1 7778 / 41,5G
• 4.00-6• 3.50/4.00-8• 4.00-10• 5.0-10• 4.00-12• 5.00-12
• 15x6.00-6• 16x6.50/7.50-8• 18x8.50/9.50-8• 260x85/3.00-4• 11x6.00-5• 11x7.10-5
E T R T O DIN Additional designation
Ty
re d
esi
gn
ati
on
s, v
alv
es
Valves
List of tubes
Tyre designations
KRANJ
SAVA TRADEWarszawa
SAVA TRADEPraha
SAVA TRADEZagreb
SAVA TRADESplit
SAVA TRADEMünchen SAVA TECH
Budapest
EUROSAVATECHTrieste
SAVA PRINTDerby
]P R E I Z K U S I S O 9 0 0
0000004
SLOVENIAN QUALIT YSLOVENSKA KAKOVOST
CE R
T I FI C A T E I S O 9 0 0 0
Sava d. d. 4502 Kranj, Škofjeloška 6, Slovenijatel.: ++386 04 206 58 81, 206 61 51 fax: ++386 04 206 64 02, 206 64 03e-mail: [email protected]://www.sava.si
SAVA TRADE Vertriebsgesellschaft, m.b.H., Münchentel.: ++ 49 8 954 414 30fax: ++ 49 8 953 289 51
SAVA TRADE, Sp. z.o.o., Warszawatel., fax: ++ 48 22 721 13 62
SAVA TRADE, s.r.o., Prahatel.: ++ 42 0 22 49 41 966, ++ 42 0 22 49 42 567fax: ++ 42 0 22 49 42 559
SAVA TRADE SPLIT, d. o. o. tel.: ++ 385 21 / 837 980fax: ++ 385 21 / 837 590
SAVATECH TRADE, Ltd., Londontel.: ++ 44 020 82 83 35 08fax: ++ 44 020 86 88 00 55
TRADING COMPANIES IN SLOVENIA AND ABROAD:
Pro
duc
tion
: Sav
atec
h, d
.o.o
.; G
rap
hic
des
ign:
Cre
atim
; Pho
to: I
gor
Pus
tovr
h, a
rchi
ve S
ava;
Tra
nsla
ted
by:
Lea
Ter
likar
; Ed
itor:
Ati
na M
ikla
včič
; Pri
nted
by:
Tis
kar
na J
anuš
; Mar
ch 2
004
Agricultural, garden and implement tyres