Save Energy Program in Indonesia by High Efficiency Centrifugal Chiller

Report about First JCM Project

in Indonesia

Ebara Refrigeration Equipment & Systems Co., Ltd. & Nippon Koei Co., Ltd.

∗ Key Points of the JCM Subsidy project implementation 1) Negotiation with User who is considering chiller replacement => Clients who understand JCM scheme and respond positively and flexibly for promoting the project 2) Keep Construction schedule on time => Work progress shall be executed smoothly from the application, manufacturing, delivery and down to settlement of payment

∗ Key Points of JCM Methodology development 1) Research to confirm chiller sales trend in the target country => Check the chiller market situation 2) Confirm chiller specification in market & service situation in the target country => Confirm Japanese brand ‘s superior chiller performance & better after sales service by us 3) Existence of Local Sales & Service Representative for local care-taking => Because JCM scheme is required monitoring & servicing of the chillers for a certain period of time frequently.

In implementation of the JCM Subsidy Project

2

∗ Usage of high efficiency chiller will enhance GHG Emission

∗ JCM subsidy project will encourage high efficiency chiller usage

∗ For GHG Emission Settled Methodology （ on 17th of Sept., 2014） Settled Monitoring Program and prepared for PDD (Project Design Document)

Created Methodology

3

∗ Chiller capacity is 1250 USRt (eqv. 4395kW) or lower

∗ Chiller’s COP(Coefficient of Performance) shall be 6.0 or higher at JIS Condition

∗ Chiller operating check can be done more than 4 times/year

∗ Refrigerant ODP value shall be ZERO ∗ Subsidy is approved subject to a program that

refrigerant shall be treated by authorized agency regardless of new installation or existing chillers.

Settled Methodology

4

∗ Compressor shall be two stage impeller ∗ With Economizer ∗ With Sub cooler ∗ Automatic Purge Unit with Activated Carbon

Facility Equipped with High Efficiency Chiller and its Features

PT. PRIMATEXCO Factory Office 5

∗ Applied Project PT. PRIMATEXCO INDONESIA

∗ Installation Location Sambong Batang Central Java, Indonesia

∗ Capacity １７５８ｋW Chilled water Temp. １６℃/１１℃ Cooling water Temp ３２℃/３７℃

Project applied to JCM Subsidy

Chiller installed at M/S PT PRIMATEXCO 6

GHG Emission Value by Methodology

Item UnitReference

ChillerProjectChiller

Refrigeration Capacity ｋW 1758 1758Base COP 5.59 ≧　6.0Motor Input ｋW 314.5 ≦ 293Adjust Operating Condition ｋW 246.8 229.5Input kW Reduction ｋW --- -17.3Operating Hours ｈｒ/Year 8760 8760Load Ratio ％ --- 95%

Grid Factor ｔCO2/MWｈ

CO2Reduction /Year ｔCO２/Year --- 117

0.814

7

Apply Process (2013) - 1

The Min itry of Emvironment/GEC Ebara Ref . Equip. & Systems Co., Ltd.

End of May 2013Public offering of Project & brief ing

Attending brief ing and arrange ourproposal

Mid of Jun 2013 Submit our Prposal

Review of proposal

Hearing for proposed project Attending hearing

Adoption judgment aginst proposal

Early July 2013 Preliminary adoption

July to Aug 2013 Document arrangement for Subsidyapplication

End of July 2013 Review of Subsidy application Submit Subsidy application

Order from M/S Primatexco Indonesia

Start Manufacturing

Schedule Ivent

Mid of Jun 2013

Early Sept. 2013

Determing Subsidy

8

Apply Process (2013) - 2

The Min itry of Emvironment/GEC Ebara Ref . Equip. & Systems Co., Ltd.

Deliver the chiller & cooling tower toIndonesia

Start site work & installing chiller &Cooling Tower

Mid od Dec.2013

Apply Intermediate site Inspection Apply Intermediate site Inspection

Mid of Dec. 2013 Submit Intermediate Inspection Report

Early Feb. 2014 Apply Final Inspection Apply Final Inspection

Mid of Feb. 2014 Start up & commissioning of chillers(1week) & shift to normal operation

19th of Feb. Off ic ial Transfer to M/S PT. PrimatexcoIndonesia

End of Feb. 2014 Submit Project Report

End of Mar. 2014to Early April

Finalization of Subsity for the Project

End of Apr. 2014 Subsidy Payment

End of Oct. 2013

Schedule Ivent

9

∗ 17th Sept. 2014 Register Methodology ∗ 25th Sept. 2014 PDD Finalized Issued Public comment same time ∗ 9th Oct. 2014 Validation by TPE at site ∗ End of Oct. 2014 Submitted JCM Registration ∗ 31th Oct. 2014 Registered JCM Registration by

Japan & Indonesia joint committee

JCM REGISTERATION

Site Visit by Indonesian JCM committee Member

10

∗ 2013 4th Application M/S PT. PRIMATEXCO INDONESIA

∗ RTBF050 GHG Reduction: 147 tCO2/Y

∗ 2014 1st Application M/S PT. NIKAWA TEXTILE INDUSTRY RTBF050 GEG Reduction: 188 tCO2/Y

JCM Applied Project at 2014

New Installed Chiller in M/S PT. NIKAWA TEXTILE INDUSTRY 11

∗ Each high efficiency chiller is not expected to reduce GHG Emission so much. However, demand of using number of Chiller is huge, that the great volume of GHG emission can be expected as a result of applying not only Indonesia, but also other South East Asia countries by JCM subsidy Project.

∗ In addition to last year’s installation, two projects adopted Subsidy in 2014 and the 4th application of 2013. We could expect GHG Emission Credit executed by both projects in 2015.

∗ We are planning to apply Subsidy not only for Textile factory in Indonesia, but also for other sectors i.e. shopping moles and many other industries for GHG Emission.

∗ We sincerely appreciate great support & help made to us by the Ministry of Environment Japan and GEC in applying for JCM subsidy projects. “Thank you very much !”

THANK YOU VERY MUCH for YOUR KEEN ATTENTION !!

Conclusion

Ebara Refrigeration Equipment & Systems Co., Ltd. & Nippon Koei Co., Ltd 12