SBCX Remote Commissioning Guid iOMCRV6.20.712c_1.0 1 CARD LAY OUT...........................................................2 2 CONNECT TO SBCX AND SET LOG IN.........................................3 2.1 CONNECT TO SBCX BY SBCX’S OMP1 DEFAULT IP..................................3 2.2 USE ROOT USE TO MODIFY ETH3 IP..............................................3 3 MODIFY DEFAULT HANDLE NUMBER IN LINUX (IMPORTANT)......................3 4 ENTER LINUX TO ENABLE THE VNC FUNCTION（IF YOU WANT TO USE VNC）.......4 5 FIXING THE CHARACTER SET OF THE SBCX AS ZH_CN.GBK......................4 5.1 MODIFY THE CHARACTER SET OF THE OPERATING SYSTEM................................4 5.2 MODIFY THE CONFIGURATION FOR VNC LOGIN SHOW IN ENGLISH..........................4 5.3 MODIFY THE CONFIGURATION FOR TELNET SHOW IN ENGLISH.............................5 6 ADJUST THE TIME ZONE AND SYSTEM TIME...................................5 7 USER AND FOLDER MODE SETTING...........................................6 7.1 CREATE THE GOMCB & ZTE USER.................................................6 7.2 MODIFY THE FOLDER MODE..................................................... 7 8 INSTALLATION SOFTWARE PREPARATION......................................7 9 IP PLAN................................................................7 10 OMM INSTALLATION.......................................................8 10.1 START REMOTESETUP TOOLS.....................................................8 10.2 CONFIGURE THE GLOBAL DATA...................................................8 10.3 CONFIGURE THE OMMHOST......................................................8 10.4 CONFIGURE GSM_OMCR....................................................... 9 10.5 CONFIGURE OMCB........................................................... 9 10.6 START INSTALLATION........................................................10 10.7 OMCR INSTALLATION........................................................10 10.8 OMCB INSTALLATION........................................................12 10.9 OMMHOST INSTALLATION......................................................13 11 CHECKING AFTER INSTALLATION...........................................14 11.1 TEMPORARY LICENSE (NO NEED IF THE LICENSE CENTER IS READY)......................14 11.2 LICENSE CENTER...........................................................15 11.3 SETTING DBORA AUTOLLY START................................................15 11.4 VERIFY ETH PORT STATUS....................................................15 11.4.1 Eth port status in Master SBCX......................................................................................................... 15 11.4.2 Eth port status in slave SBCX............................................................................................................ 17 11.5 VERIFY THE OMMHOST....................................................... 17 11.5.1 Root user start or stop the OmmHost............................................................................................. 18 11.5.2 Check the SBCX board status:........................................................................................................... 18 11.5.3 Verify the gomcr&gomcb process status......................................................................................... 18 11.5.4 Check all OMM processes................................................................................................................. 18 12 OMCB&SDR ROUTE CONFIGURATION..........................................19 13 SETTING THE IBACKUP...................................................20 14 NTP SETTING...........................................................21 14.1 NTP (OMP SYNCHRONIZE WITH THE SBCX).......................................21 14.2 NTP (SBCX SYNCHRONIZE WITH THE MINOS)......................................22 SBCX Commissioning Guide-Frechet (1/35)
Transcript
SBCX Remote Commissioning GuidiOMCRV6.20.712c_1.0
1 CARD LAY OUT...........................................................................................................................................22 CONNECT TO SBCX AND SET LOG IN..................................................................................................3
2.1 CONNECT TO SBCX BY SBCX’S OMP1 DEFAULT IP..........................................................................................32.2 USE ROOT USE TO MODIFY ETH3 IP.....................................................................................................................3
3 MODIFY DEFAULT HANDLE NUMBER IN LINUX (IMPORTANT)..................................................34 ENTER LINUX TO ENABLE THE VNC FUNCTION（IF YOU WANT TO USE VNC）..................45 FIXING THE CHARACTER SET OF THE SBCX AS ZH_CN.GBK.....................................................4
5.1 MODIFY THE CHARACTER SET OF THE OPERATING SYSTEM.................................................................................45.2 MODIFY THE CONFIGURATION FOR VNC LOGIN SHOW IN ENGLISH....................................................................45.3 MODIFY THE CONFIGURATION FOR TELNET SHOW IN ENGLISH...........................................................................5
6 ADJUST THE TIME ZONE AND SYSTEM TIME..................................................................................57 USER AND FOLDER MODE SETTING....................................................................................................6
7.1 CREATE THE GOMCB & ZTE USER.........................................................................................................................67.2 MODIFY THE FOLDER MODE.................................................................................................................................7
8 INSTALLATION SOFTWARE PREPARATION......................................................................................79 IP PLAN.........................................................................................................................................................710 OMM INSTALLATION................................................................................................................................8
10.1 START REMOTESETUP TOOLS................................................................................................................................810.2 CONFIGURE THE GLOBAL DATA............................................................................................................................810.3 CONFIGURE THE OMMHOST.................................................................................................................................810.4 CONFIGURE GSM_OMCR...................................................................................................................................910.5 CONFIGURE OMCB..............................................................................................................................................910.6 START INSTALLATION.........................................................................................................................................1010.7 OMCR INSTALLATION........................................................................................................................................1010.8 OMCB INSTALLATION........................................................................................................................................1210.9 OMMHOST INSTALLATION..................................................................................................................................13
11 CHECKING AFTER INSTALLATION....................................................................................................1411.1 TEMPORARY LICENSE (NO NEED IF THE LICENSE CENTER IS READY)................................................................1411.2 LICENSE CENTER................................................................................................................................................1511.3 SETTING DBORA AUTOLLY START.......................................................................................................................1511.4 VERIFY ETH PORT STATUS.................................................................................................................................15
11.4.1 Eth port status in Master SBCX................................................................................................................1511.4.2 Eth port status in slave SBCX...................................................................................................................17
11.5 VERIFY THE OMMHOST.....................................................................................................................................1711.5.1 Root user start or stop the OmmHost........................................................................................................1811.5.2 Check the SBCX board status:..................................................................................................................1811.5.3 Verify the gomcr&gomcb process status...................................................................................................1811.5.4 Check all OMM processes.........................................................................................................................18
12 OMCB&SDR ROUTE CONFIGURATION.............................................................................................1913 SETTING THE IBACKUP.........................................................................................................................2014 NTP SETTING.............................................................................................................................................21
14.1 NTP (OMP SYNCHRONIZE WITH THE SBCX)....................................................................................................2114.2 NTP (SBCX SYNCHRONIZE WITH THE MINOS)..................................................................................................22
15.1 CONFIRM THAT USE MP VERSION P005 TO DEBUGGING THE OMP....................................................................2215.2 SET AND UPLOAD ZXG10.CFG............................................................................................................................2215.3 STOP CARD LOG PRINT.......................................................................................................................................22
16 MODIFY PERFORMANCE REPORT MODE FROM NFS TO MESSAGE MODE..........................2317 SETTING NFS.............................................................................................................................................25
17.1 SETTING NFS PROCESS......................................................................................................................................2517.2 CHECK NFS BY TELNET TO OMP......................................................................................................................26
18 SYNCHRONIZE DATA (FORM MASTER SBCX TO SLAVE)............................................................2618.1 SYNCHRONIZING DATA (CFG, DB AND VERSION) IN INTEGRATED OMCR VERSION（IBACKUP）...................26
18.1.1 Modify Deploy files...................................................................................................................................2718.1.2 Configure Ibackup script...........................................................................................................................2718.1.3 Irestore data on Slave SBCX.....................................................................................................................27
18.2 STOP OMMHOST OF SLAVE SBCX.....................................................................................................................2818.3 SYNCHRONIZE DATA OF OMCR AND OMCB....................................................................................................2818.4 SYNCHRONIZE RUNNING DATA OF OMCR AND OMCB.....................................................................................2818.5 CHANG OVER TEST.............................................................................................................................................28
1 Card lay outNote: Pls confirm put out the UIMC cards in the shelf which SBCX card in before you commissioning to stop the SBCX reboot every 10 miniutus due to the UMIC itself recover funcation.
SBCX Commissioning Guide-Frechet (2/31)
2 Connect to SBCX and set log in2.1 Connect to SBCX by SBCX’s OMP1 default IP
Use laptop connect to OMP1 (default IP: 129.0.31.100/24) port in SBCX, you can set you loptop IP as: 129.0.31.101/24
2.2 Use root use to modify eth3 IP
We only have to set eth3 IP for remote OMM installation and all others ip will be configured during the installation by remoteSetup tools.#cd /etc/sysconfig/network-scripts#vi ifcfg-eth3DEVICE=eth3BOOTPROTO=noneHWADDR=00:19:c6:41:3a:62IPADDR=10.31.9.195NETMASK=255.255.255.240ONBOOT=yesTYPE=EthernetUSERCTL=noIPV6INIT=noPEERDNS=yesGATEWAY=10.31.9.193~Stop and start eth3#ifconfig eth3 down#ifconfig eth3 upNote: Do not modify the IP, gateway and hosts name by GUI; otherwise the IP may be lost.
3 Modify Default Handle Number in Linux (Important)Log in as the root user to execute the following command:#ulimit -n 4096Log in as the root user to modify the limits.conf file:#vi /etc/security/limits.confAdd the following two lines after the last line of the document:* soft nofile 4096* hard nofile 4096Suggestion: It’s better to copy the above contents into a file in the system instead of typing manually.Check the modified parameters with the ulimit-a command:# ulimit -acore file size (blocks, -c) 0data seg size (kbytes, -d) unlimitedfile size (blocks, -f) unlimitedpending signals (-i) 1024max locked memory (kbytes, -l) 32max memory size (kbytes, -m) unlimitedopen files (-n) 4096pipe size (512 bytes, -p) 8POSIX message queues (bytes, -q) 819200
SBCX Commissioning Guide-Frechet (3/31)
stack size (kbytes, -s) 10240cpu time (seconds, -t) unlimitedmax user processes (-u) 16251virtual memory (kbytes, -v) unlimitedfile locks (-x) unlimitedNote: In the first step, modify the handle limitation in the current system files. In the second step, restart the system to make the modification valid.
4 Enter Linux to enable the VNC function（if you want to use VNC）Enable the VNC in system by gomcr user$ vncserverYou will require a password to access your desktops.Password: gomcr123Verify: gomcr123New 'shbsc1:1 (gomcr)' desktop is localhost.localdomain:1 Creating default startup script /home/gomcr/.vnc/xstartupStarting applications specified in /home/gomcr/.vnc/xstartupLog file is /home/gomcr/.vnc/shbsc1:1.log（the red color “1“is the display serial number after excuting VNC Server）
User gomcr user login，modify vnc Graphical interfaces，then reset vncserver$ vi .vnc/xstartupModify “twm &” to“gnome-session &”$ vncserver -kill :1（“1“is the display serial number after excuting VNC Server）$ vncserverNew 'SHBSC1:1 (gomcr)' desktop is SHBSC1:1Starting applications specified in /home/gomcr/.vnc/xstartupLog file is /home/gomcr/.vnc/shbsc1:1.log (“1“is the display serial number after excuting VNC Server)Notice：Important！Close the VNC server auto startup by root user. Otherwise oracle can’t startup automatically.#chkconfig vncserver off#chkconfig --list vncservervncserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off
5 Fixing the Character Set of the SBCX as zh_CN.gbk
5.1 Modify the character set of the operating system
Modify content of the file /etc/sysconfig/i18n as user root, and the contents in blue are the results after modification.#vi /etc/sysconfig/i18n
Log onto the SBCX by telnet again, and check whether the character set has been modified successfully# locale | grep LANGLANG=zh_CN.gbk
SBCX Commissioning Guide-Frechet (4/31)
5.2 Modify the configuration for VNC login show in English
Use root use to setting VNC, and add more line export LANG="en_US.UTF-8", and modify the twm & as gnome-session &
#vi ~/.vnc/xstartup#!/bin/sh# Uncomment the following two lines for normal desktop:# unset SESSION_MANAGER# exec /etc/X11/xinit/xinitrcexport LANG="en_US.UTF-8"[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresourcesxsetroot -solid greyvncconfig -iconic &xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &gnome-session &
Use vncserver -kill :2 (VNC PID) command to kill all VNC PID( by root use, gomcr user, oracle user if have)，it will be ok when restart VNC.
5.3 Modify the configuration for telnet show in English
Root use to add one line export LANG="en_US.UTF-8" in profile.# vi /etc/profileAdd one line on belowexport LANG="en_US.UTF-8"Save and exit telnet and telnet again, it will be ok.
6 Adjust the Time Zone and system time1. Right click the time area on the right corner; select [Adjust Date & Time]
2. Input the password of root user, default is root123
3. In the [Date/Time Properties] window, select [Time Zone], choose the correct one.For India, it is Asia/Kolkata. Then press [OK]
SBCX Commissioning Guide-Frechet (5/31)
4. Wait for 5 minutes, the time on the right corner will be change to India time.If the time is not correct, change it in [Date/Time Properties][Date & Time].
And reboot the system after you setting fininshed#reboot
7 User and folder mode setting7.1 Create the gomcb & zte user
1. Create the gomcb & zte user in system by root user#groupadd gomcb#useradd gomcb -d /home/gomcb -g gomcb#passwd gomcbChanged password for user gomcb.New UNIX password: gomcb123BAD PASSWORD: it is WAY too shortRetype new UNIX password: gomcb123passwd: all authentication tokens updated successfully.#groupadd zte#useradd zte -d /home/zte -g zte#passwd zteChange password for user gomcb.New UNIX password: zteBAD PASSWORD: it is WAY too shortRetype new UNIX password: ztepasswd: all authentication tokens updated successfully.
SBCX Commissioning Guide-Frechet (6/31)
After create the username& password, try use gomcb user ftp to the server7.2 Modify the folder mode
Confirm below folder get enough power so that the remoteSetup tools and scritps can run for installation.# chmod -R 755 /home/# ls -ldrwxr-xr-x 4 gomcb gomcb 4096 Oct 13 09:25 gomcbdrwxr-xr-x 15 gomcr gomcr 4096 Oct 13 09:31 gomcrdrwx------ 2 root root 16384 Jul 4 2009 lost+founddrwxr-xr-x 16 oracle oinstall 4096 Oct 12 08:44 oracledrwxr-xr-x 4 zte zte 4096 Oct 13 09:26 zte# chmod -R 755 /oracleapp/# ls -ldrwxr-xr-x 4 oracle oinstall 4096 Jul 4 2009 oracleapp
8 Installation software preparationBelow version was required for OMM installation (only for BSNL project)Type Version
We have to make one zip file for OMCR software so that we can install the OMCR main version and patch same time.Unzip file iOMCRV6.20.712c-OMCBV4.00.200m.zipThen unzip iOMCRV6.20.712c-OMCBV4.00.200mP001.zip andiOMCRV6.20.712c-OMCBV4.00.200mP002.zipCopy and replace the file in iOMCRV6.20.712c-OMCBV4.00.200m. At last, zip version iOMCRV6.20.712c-OMCBV4.00.200m again.
9 IP PlanCard Port IP Funcation GatewaySBCX OMC1(ETH3) 10.35.32.194/28 SBCX
OMP1 (ETH6) 129.0.67.2/28 To OMPOMP OMC2 129.0.67.1/28 To SBCX
10 OMM installation10.1 Start remoteSetup tools
Connect you laptop toSBCX by eth3 IP. You loptop can setting IP same subnet with eth3 but confirms that don’t use planning IP for eth3, eth3:1 eth3:3.Run the remoteSetup tools in you laptop. And click the ENTER.
10.2 Configure the global data
Sbcx IP address is same with eth3 which is use for SBCX mantenence. Left card and Right card use different IP.
Click “Next” to continue.10.3 Configure the OmmHost
SBCX Commissioning Guide-Frechet (8/31)
SBCX in slot1 should be configured 1, and left SBCX in slot3 should be configured 3 and right. And there must be no any blanks in host name because of the Linux system doesn’t support blank Character. Click “Next” to continue.
10.4 Configure GSM_OMCR
Click “Next” to continue.10.5 Configure OMCB
SBCX Commissioning Guide-Frechet (9/31)
Click “Next” to continue.10.6 Start installation
Click “Install” to continue.10.7 OMCR installation
SBCX Commissioning Guide-Frechet (10/31)
Click “contiune” if all OMCR upload and script checking success, and correct it then click “retry” if any fault get until all checking item success.
It will take almost 30 minis to install the OMCR; the dbase scripts step will take long time.it wil show as below when OMCR install finish.
SBCX Commissioning Guide-Frechet (11/31)
Click “continue” to start OMCB installation.10.8 OMCB installation
Click “contiune” if all OMCB upload and script checking success, and correct it then click “retry” if any fault get until all checking item success. Pls count to confirm that the check item are same with below chart.especially for last one “Test Oracle _SID user and passoword”, the OMCB installation will be hung up if no this item.
If the last item not there:1. Check that the database and listener whether work normal or not, to configure database and listener
work normal acooding to commissing documents.2. Restore the tnsnames.ora by earily backup one.$ cd /oracleapp/oracle/product/10.2.0/network/admin/$ ls -ltotal 32-rwxr-xr-x 1 oracle oinstall 1826 Oct 11 15:58 tnsnames.ora-rwxr-xr-x 1 oracle oinstall 697 Oct 11 14:41 tnsnames.ora.20121011143833-rwxr-xr-x 1 oracle oinstall 1437 Oct 11 15:52 tnsnames.ora.20121011155155The tnsnames like tnsnames.ora.20121011143833 (time is earlier, and size is smaller) is backup ones which backup by software itself. So you can use it (tnsnames.ora.20121011143833 which the time is earlier and size is smaller) to restore.$cp tnsnames.ora tnsname.ora.bak
SBCX Commissioning Guide-Frechet (12/31)
$cp tnsnames.ora.20121011143833 tnsnames.ora3. Delete installation temp files and install again, below parts must be deleted.
# cd /tmp# rm -rf omminstall/ //* installation temp files.# cd /home/gomcr# rm -rf zxgomcr/# cd /home/gomcb# rm -rf ZXGOMCB/# cd /home/zte# rm -rf OmmHost/
It will take almost 15 minis to install the OMCB; it wil show as below when OMCB install finish.
Click “continue” to start OmmHost installation.10.9 OmmHost installation
SBCX Commissioning Guide-Frechet (13/31)
After all finish, click “Yes” to reboot the SBCX.
We can click “Quit” to finsh the installation after reboot the SBCX. OMCR, OMCB, OmmHost installations have been finished in One SBCX till now, and then you can install another SBCX or debug OMP.
11 Checking after installation11.1Temporary License (no need if the License center is ready)
We use the license center to manage all the NE’s license in BSNL project. But M31 is not ready right now, so we use the temporary license for ISMG. Use gomcr user to change the License location:
$cd /home/gomcr/zxgomcr/ums-svr/deploy$ vi deploy-gsmomcr01.propertieslicense-location=LOCAL
SBCX Commissioning Guide-Frechet (14/31)
Delete the files in /home/gomcr/zxgomcr/ums-svr/temp and then restart the gomcr process.And Use ftp tools upload the temporary license file to SBCX /home/gomcr/zxgomcr/ums-svr/deploy/. If the client is still can’t be start, the temporary license file ums-license.LCS is in the IOMCR version package /gsmomcr/ums-svr/deploy. Delete the files in /home/gomcr/zxgomcr/ums-svr/temp and then restart the gomcr process.
11.2License Center
Change the temporary license to license center after the ISMG connect to License center.Use gomcr user to change the License location:
$vi /home/gomcr/zxgomcr/ums-svr/deploy/deploy-gsmomcr01.properties# 二选一，默认值为 LOCALlicense-location=CENTER-----------//License center
# License代理的远端服务器地址license.server.IP=10.31.2.217----------------//License center IPlicense.server.IP.spare=10.31.2.217----------//License center IP
Delete the files in /home/gomcr/zxgomcr/ums-svr/temp and then restart the gomcr process.And Use ftp tools upload the temporary license file to SBCX /home/gomcr/zxgomcr/ums-svr/deploy/. If the client is still can’t be start, the temporary license file ums-license.LCS is in the IOMCR version package /gsmomcr/ums-svr/deploy. Delete the files in /home/gomcr/zxgomcr/ums-svr/temp and then restart the gomcr process.
11.3Setting dbora autolly start
Set new dbora to make sure the OMCB dbase can be start outolly.#cp /home/gomcr/zxgomcr/ums-svr/tools/rb_split/dbora /etc/init.d#cd /etc/init.d/#chmod 755 dbora# ln -s /etc/init.d/dbora /etc/rc0.d/K10dbora# ln -s /etc/init.d/dbora /etc/rc6.d/K10dbora# ln -s /etc/init.d/dbora /etc/rc5.d/S99dbora# ln -s /etc/init.d/dbora /etc/rc3.d/S99dbora
Reboot SBCX to confirm that the dbase whether can start autolly or not.11.4Verify ETH port status
11.4.1 Eth port status in Master SBCXMaster SBCX: eth0, eth0:1, eth0:2；eth2, eth2:1, eth3, eth3:1, eth3:2；eth4, eth4:1, eth6；lo.
$ ifconfigeth0 Link encap:Ethernet HWaddr 00:19:C6:41:36:ED inet addr:128.0.28.1 Bcast:128.0.28.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)eth0:1 Link encap:Ethernet HWaddr 00:19:C6:41:36:ED inet addr:128.0.29.1 Bcast:128.0.29.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1eth0:2 Link encap:Ethernet HWaddr 00:19:C6:41:36:ED
RX bytes:967938 (945.2 KiB) TX bytes:967938 (945.2 KiB)11.5Verify the OmmHost
11.5.1 Root user start or stop the OmmHost.#cd /home/zte/OmmHost/bin/#nohup ./startsys#./stopsys
11.5.2 Check the SBCX board status:Useroot user telnet to Master Localhost (can telnet to localhost only when OmmHost running)#telnet localhost 1234SBCX->SCSShowMcmInfoSCSMCProc: All 2 CThreads power on successfully.SBCX->SCSShowBrdInfoboard backup mode: 1+1board ms state: master SBCX board work statusSBCX->exit
11.5.3 Verify the gomcr&gomcb process statusUse gomcr use to check the gomcr status$cd /home/gomcr/zxgomcr/ums-svr/tools/backup/log$grep started backup*.logbackup process is started. ----------------//master&slave process start successful$ /home/gomcr/zxgomcr/ums-svr/log$grep 'UMS-PLATFORM'|grep 'started' server-start.logUMS-PLATFORM (MX MicroKernel) [R6.20.711d-B4.00.200m] started.---//UMS start successfulUse gomcb use to check the gomcr status$cd /home/gomcb/ZXGOMCB/ums-svr/tools/backup/log$grep started backup*.logbackup process is started-----------------//master&slave process start successful$cd /home/gomcb/ZXGOMCB/ums-svr/log$ grep 'UMS-PLATFORM'|grep 'started' server-start.logUMS-PLATFORM (MX MicroKernel) [ZXOMCBV4.09.21.08.P03] started.---//UMS start successful
11.5.4 Check all OMM processesNormally, there are 8 processes in Master SBCX and only 6 processes in Slave SBCX, there are no BoostMain processes in Slave SBCX.Master:$ ps -ef|grep javagomcb …com.zte.ums.uep.psl.console.manager.BootMaingomcb …com.zte.ums.uep.psl.backup.RunBackupgomcb …com.zte.ums.uep.psf.ftp.server.FtpServergomcb …com.zte.ums.BoostMain…gomcr …com.zte.ums.uep.psl.console.manager.BootMaingomcr …com.zte.ums.uep.psl.backup.RunBackupgomcr …com.zte.ums.uep.psf.ftp.server.FtpServergomcr …com.zte.ums.BoostMain
12 OMCB&SDR route configurationThe route for OMCB between SBCX and SDR sites is started by OmmHost after we installed OmmHost. So we have to add the route in OmmHost files. There are 3 NetIf configration files. BSNL project used SBCX with PCB NO. 090602. So we only have to modify NetIf01.conf.NetIf00.conf for SBCX with PCB NO.060202NetIf01.conf is SBCX with PCB NO. 090602NetIf02.conf is SBCX with PCB NO. SBCX_2
Note: IP and IPOE site use same RPU IP. So that we can use MR server for all site.
139.67.0.250 139.67.0.254 10.35.32.145 118.67.Y.200 118.67.Y.100# cd /home/zte/OmmHost/bin/conf/# ls -ltotal 28-rwxr--r-- 1 root root 568 Oct 13 09:26 BrdPhyAddr.conf-rwxr--r-- 1 root root 3638 Oct 13 09:26 NetIf00.conf-rwxr--r-- 1 root root 3700 Oct 13 09:26 NetIf01.conf-rwxr--r-- 1 root root 3669 Jan 14 2012 NetIf02.conf-rwxr--r-- 1 root root 1983 Oct 13 09:26 OmmProcConfig.conf-rwxr-xr-- 1 root root 3241 Oct 13 09:30 SysPrnCtrl.conf-rwxr--r-- 1 root root 936 Oct 13 09:26 system.confRoot user to configure the NetIf01.conf.# vi NetIf01.conf#OMCB channel IP1 for IPOE [Channel6]ChannelName= OMCR_SDR_ETH4NetIfName = eth4IP =139.67.0.250NETMASK = 255.255.255.0MacAddr =GateWay = 139.67.0.254 /*IPBB-OMCB IP*/NextSkipIP =118.67.0.0 /* Destination IP: IPOE SDR IP pool*/
SBCX Commissioning Guide-Frechet (19/31)
NextSkipNetMask =255.255.0.0 /*network mask */NeedSetDefaultGateWay = 0 /*’0’, must be 0, because default route is in ETH3 port*/ShareIP = 1
#OMCB channel IP1 for IP[Channel7]
ChannelName= OMCB_SDR_ETH4NetIfName = eth4:1IP =139.67.0.252NETMASK = 255.255.255.0MacAddr =GateWay = 139.67.0.254 /*IPBB-OMCB IP*/NextSkipIP =10.35.8.0 /* Destination IP: IP SDR IP pool*/NextSkipNetMask =255.255.255.0 /*network mask*/NeedSetDefaultGateWay = 0 /*’0’, must be 0, because default route is in ETH3 port*/ShareIP = 1Root use to restart the OmmHost process so that the route in OmmHost can be start.#cd /home/zte/OmmHost/bin/#./stopsys#nohup ./startsys
13 Setting the ibackupCreate the path on Ems by root user#mkdir /home/omc/backup/bsc276#mkdir /home/omc/backup/bsc276/left#mkdir /home/omc/backup/bsc276/right#chmod -R 777 /home/omc/backup/bsc276Create the path SBCX by root user#mkdir /home/gomcr/backup#chmod -R 777 /home/gomcr/backupModify the ibackup scripts by gomcr user$vi /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.conf[global]omchome=/home/gomcr/zxgomcr/ums-svrdbserver=gomcrdbuser=system:oraclebackupdir=/home/gomcr/backupdb=ncfg=nver=nftp=nretain=7
[ftp]servernum=1
SBCX Commissioning Guide-Frechet (20/31)
ftpserver=10.31.2.219:21ftpuser=omc:omcftpdir=/home/omc/backup/bsc271/left-------/left for left slot SBCX and right for right slot SBCX.
ftpserver=ftpuser=Test the script whther work normal or not. Confirm that there are no any error and failure.$perl /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.pl cfg=y db=y ftp=yExport terminated successfully without warnings.Dump db sm data success=18,failure=0Execute gzip sm20121206083820.dmp successExecute tar backup20121206083820-6.20.712c.tar successExecute mv backup20121206083820-6.20.712c.tar successExecute ftp /home/gomcr/backup/backup20121206083820-6.20.712c.tar successDelete log file successDelete backup file success#End executionInvoke cron by gomcr user, no need to add version backup of right slot (only one SBCX backup version is ok due to the version is very big) and make different backup time for left and right SBCX card.exmple:Left slot SBCX card$crontab -e00 1 * * * perl /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.pl cfg=y db=y ftp=y00 2 1 * * perl /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.pl ver=y ftp=yRight slot SBCX card$crontab -e00 3 * * * perl /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.pl cfg=y db=y ftp=y
14 NTP Setting14.1 NTP (OMP synchronize with the SBCX)
Check working port mapping# iptables -t nat -LDNAT tcp -- anywhere anywhere tcp dpt:ftp to::20021 DNAT udp -- anywhere anywhere udp dpt:ntp to::20123$vi /home/gomcr/zxgomcr/ums-svr/deploy/deploy-gsmomcr01.propertiesuserdefined-uep-psl-clocksync.port=20123Check port mapping in iptables.#cat /etc/sysconfig/iptables-A PREROUTING -p tcp -m tcp --dport 21 -j DNAT --to-destination :20021-A PREROUTING -p udp -m udp --dport 123 -j DNAT --to-destination :20123Add the port mapping as the root user if not configured.# /sbin/iptables -t nat -A PREROUTING -p udp --dport 123 -j DNAT --to-destination :20123Save mapping rules so that the system can load mapping rules when it gets started.# iptables-save > /etc/sysconfig/iptablesRestart the iptables to make port active.#service iptables restart
SBCX Commissioning Guide-Frechet (21/31)
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: nat filter [ OK ]
Unloading iptables modules: [ OK ]
Applying iptables firewall rules: [ OK ]
Check IP configuration in deploy files
$ vi /home/gomcr/zxgomcr/ums-svr/deploy/deploy-999split.properties
Confirm that the Minos has already started the NTP.Set cron on SBCX by root user.the IP is the NTP server IP (Minos which the SBCX connect to)#crontab -e30 05 * * * /usr/sbin/ntpdate 10.31.2.219; /sbin/hwclock -wAnd you can manually update the time form the Minos.#ntpdate 10.31.2.219Save the time to BIOS# hwclock -w
15 OMP Debugging15.1 Confirm that use MP version p005 to debugging the OMP.
15.2 Set and upload zxg10.cfg
zxg10.cfg is in the same path with OMP CPU version.Modify zxg10.cfgUSERPRIENABLE = 0CELL ID CFG = 0CBC OMCR USED = 0 //1 means out CBCFRONTEND IP = 129.0.67.2 //SBCX eth6 IPFRONTEND UID = 500 //SBCX gomcr UIDFRONTEND GID = 500 //SBCX gomcr GIDUse ftp tools upload to SBCX /home/gomcr, and then ftp to OMP and put it to OMP$ ftp 129.0.67.1Name (129.0.67.1:gomcr): ztePassword:zteftp> cd /DOC0/CFGftp> bin200 Type set to I, binary mode
SBCX Commissioning Guide-Frechet (22/31)
ftp> put zxg10.cfgftp> dir size date time name 4096 Oct-16-2012 15:29:42 . <DIR> 4096 Oct-16-2012 14:26:08 .. <DIR> 4257 Oct-16-2012 15:29:42 zxg10.cfg
15.3 Stop card log print
Notice: this part no need to do, but you must check it, the default setting is “System PrintLevel:0, but all process is 5, total 1000 processes ), That also means not print, which show as below.And you also can check the path /nfsDev/iBSCX/LOG in SBCX (X is BSC ID), if there are any logs or not, stop log print if any logs there.Telnet to OMP$telnet 129.0.67.1Check settingMPX86_2->OSS_DbgShowLogCfg
start to print log config of local board:LocalLogCfg header info:System PrintLevel:0MagicNbr=2018915346VersionInfo=0[000-049]:[+00]:5555555555[+10]:5555555555[+20]:5555555555[+30]:5555555555[+40]:5555555555[050-099]:[+00]:5555555555[+10]:5555555555[+20]:5555555555[+30]:5555555555[+40]:5555555555[100-149]:[+00]:5555555555[+10]:5555555555[+20]:5555555555[+30]:5555555555[+40]:5555555555[150-199]:[+00]:5555555555[+10]:5555555555[+20]:5555555555[+30]:5555555555[+40]:5555555555[200-249]:[+00]:5555555555[+10]:5555555555[+20]:5555555555[+30]:5555555555[+40]:5555555555
16 Modify performance report mode from NFS to message modeBefore the performance data of the iBSC is reported by NFS mode. If the network quality is not good, it may fail to write to the disk. If the problem is serious, the link on the control plane will be disconnected and the service will be abnormal.For iBSCV6.20.711 series versions and the later versions, the mode to report the performance data is improved, that is, the data is reported in the message sending and receiving mode between OMP and SBCX. The message sending and receiving mode cannot work if OmmHost is not deployed in the server.1. Open ISMG, go to help-about, press “Ctrl+Alt+0” together and input password“xxx” to enable hidden functions.
SBCX Commissioning Guide-Frechet (23/31)
2. Go to configuration management, double click managed element, and then click the icon of folder. Select master configuration set.
3. Go to IBSC FUNCTION – IBSC BSCINFO, modify NFSSWITCH to “0”, then synchonize modied tables to disable NFS in OMP card.
SBCX Commissioning Guide-Frechet (24/31)
4. After synchronized, telnet OMP board to check message mode is enabled or not$ telnet 129.0.67.1login:ztepassword:zteMPX86_2->OmsTxSaveFileShowbNfsLinkOK=FALSE, bOmmHostLinkOK=TRUE, IsMaster=TRUE, DirSuccess=FALSE,IsWriNFSTimer=TRUE, OmcrLinkOK=TRUE, bIsOmpSave=FALSE, bMsgSaveType=TRUE.value = 20 = 0x14bOmmHostLinkOK and bMsgSaveType is for message mode. 5. Check that the performance data whether is reported or not in ISMG performance management after 15 minutes later.
17 Setting NFSThe NFS must be configured even though we use message mode show as chapter 16 “Modify performance report mode from NFS to message mode”, because of the “Front PC communication link broken alarm(18900224)” alarm monitored by NFS mode, it will show 18900224 alarm if NFS not started normally.
17.1 Setting NFS process
As the root user, revise the property of the nfsDev directory into gomcr#chown -R gomcr:gomcr /nfsDevEdit /etc/exports, (default setting, and check)#vi /etc/exportsAdd the following: /nfsDev *(rw,insecure,sync,no_wdelay,all_squash,anonuid=500,anongid=500)Note: Here, anonuid=500 is the uid of the gomcr user, and anongid=500 is group id of the gomcr user, which can be fetched by the /etc/password file. Restarts the nfs service:# /etc/init.d/nfs startStart NFS service: [OK]Stop NFS quotas: [OK]Start NFS deamon process: [OK]Start NFS mountd : [OK]# /usr/sbin/exportfs
SBCX Commissioning Guide-Frechet (25/31)
/nfsDev <world>Revise service configuration so that it starts automatically with the system#chkconfig --level 345 nfs on#chkconfig --list nfsnfs 0:OFF 1: OFF 2: OFF 3:ON 4: ON 5: ON 6: OFFStart nfsdetect process manually by gomcr user.$cd /home/gomcr/zxgomcr/ums-svr/tools/nfsdetect/$./nfsDtctCronInvoke the nfsDtctCron script with Linux’s CRON function to prevent the nfsdetect process from exiting automatically. Add below items to cron by root user.#crontab -eOMCHOME=/home/gomcr/zxgomcr/ums-svr13 * * * * $OMCHOME/tools/nfsdetect/nfsDtctCron28 * * * * $OMCHOME/tools/nfsdetect/nfsDtctCron43 * * * * $OMCHOME/tools/nfsdetect/nfsDtctCron58 * * * * $OMCHOME/tools/nfsdetect/nfsDtctCronCheck nfsdetect process; notice that the nfsDtctCron is start by gomcr user.$ps -ef | grep nfsdetectgomcr 1412 24229 0 12:01 pts/4 00:00:00 grep nfsdetectgomcr 12528 1 0 Jun01 ? 00:16:03 /home/gomcr/ums-svr/tools/nfsdetect/redhat/nfsdetect -log:/home/gomcr/ums-svr/log/nfsdetect
17.2 Check NFS by telnet to OMP
Telnet OMP board to check NFS work or not$ telnet 129.0.67.1login:ztepassword:zteMPX86_2->NfsShowStateNFS SVR IP: 129.0.71.2 //connect to OMCR IP(SBCX’s eth6)NFS SVR State: ONLINE //connectedNFS SVR Mount State: OK //mountedLocal Device Name: /nfsDevNFS SVR Mount State: OKg_NfsSvrMacStat == NFS_SVR_MAC_NORMAL
18 Synchronize data (form Master SBCX to Slave)After the master/slave SBCX rectification, check the consistency of the master/slave SBCX data after both boards work in the master/slave state stably. If the data is not consistent, it is necessary to perform all-table synchronization. It is necessary to perform data consistency check to the OMCR of the integrated OMCR and the independent OMCB at the same time. Use eth0:1 which Ip is 128.0.29.1/9 (left/right) for GOMCB and eth0:2 which Ip is 128.0.30.1/9 for GOMCR backup. All IPs are configured in “$OMCHOME/deploy/deploy-999split.properties” files.Note: 1. Must to execute all steps after ISMG/OMCB installed.2. Must to execute the steps without Ibackup when the space of the /home directory of the master SBCX is full, the slave board is powered down and restarted, or the master SBCX is restarted due to other causes.
SBCX Commissioning Guide-Frechet (26/31)
18.1 Synchronizing Data (cfg, db and version) in Integrated OMCR Version（Ibackup）The purpose of this step is to ensure the data consistency for the configuration, version, database table, etc. in the master/slave boards.Notice: And this operation is used after version installed for first time Synchronizing Data. The resource tree may be lost in ISMG.
18.1.1 Modify Deploy filesGomcr user modify gomcr deploy file.$cd /home/gomcr/zxgomcr/ums-svr/deploy$vi deploy-999split.propertiesums.systemproperty.com.zte.ums.uep.localaddress=10.31.9.197ums.systemproperty.com.zte.ums.bind.socket.client.ip=139.67.0.250ums.services.bind.multi.local.addresses=139.67.0.250,129.0.67.2,128.0.30.1,128.0.30.9Pls check and confirm that red IP are there.Gomcb user modify gomcb deploy file.$cd /home/gomcb/ZXGOMCB/ums-svr/deploy/$vi deploy-999split.propertiesums.systemproperty.com.zte.ums.uep.localaddress=10.31.9.198ums.systemproperty.com.zte.ums.bind.socket.client.ip=139.67.0.252ums.services.bind.multi.local.addresses=139.67.0.252,128.0.29.1,128.0.29.9Delete the files in ums-svr/temp and then restart the gomcr and gomcb process.
ftpserver=128.0.30.9:10021ftpuser=gomcr:gomcr123ftpdir=/home/gomcr/backupNotice: So that the backup data can be sent to Slave SBCX, then you can restore it. Pls change it to Minos inofomation after Minos commissioning.
18.1.3 Irestore data on Slave SBCXIbackup on master SBCX$perl /home/gomcr/zxgomcr/ums-svr/tools/ibackup/ibackup.pl cfg=y db=y ver=y ftp=y
SBCX Commissioning Guide-Frechet (27/31)
Irestore on Slave SBCX$perl $OMCHOME/tools/ibackup/irestore.pl file=/home/gomcr/backup/backup2012
18.2 Stop OmmHost of Slave SBCX
# cd /home/zte/OmmHost/bin/# ./stopsys
18.3 Synchronize data of OMCR and OMCB
Login Master/Slave SBCX and delete below files in of Master/Slave SBCX.# cd /home/gomcr/zxgomcr/ums-svr/tools/backup/rundata/# rm -rf *# cd /home/gomcr/zxgomcr/ums-svr/tools/backup/sqldata/# rm -rf *# cd /home/gomcb/ZXGOMCB/ums-svr/tools/backup/rundata/# rm -rf *# cd /home/gomcb/ZXGOMCB/ums-svr/tools/backup/sqldata# rm -rf *Run script in Master SBCX by gomcr user#su - gomcr$ cd /home/gomcr/zxgomcr/ums-svr/tools/backup$./dbsync-linux.sh oracleRun script in Master SBCX by gomcb user$su - gomcb$ cd /home/gomcb/ZXGOMCB/ums-svr/tools/backup/$./dbsync-linux.sh oracle
18.4 Synchronize running data of OMCR and OMCB
Start OmmHost of Slave SBCX, so that the Ftp server can be started on slave SBCX and the master SBCX can Ftp to slave ones to upload the running data.# cd /home/zte/OmmHost/bin/# nohup ./startsysRun script in Master SBCX.#su - gomcr$ cd /home/gomcr/zxgomcr/ums-svr/tools/backup$ ./dbsync-linux.sh oracle$su - gomcb$ cd /home/gomcb/ZXGOMCB/ums-svr/tools/backup/$./dbsync-linux.sh oracle
18.5 Chang over test
#telnet localhost 1234Confirm that the SBCX is master one.SBCX->SCSShowBrdInfoLogical address info: system: 0 subsystem: 255 module: 100 unit: 65535 board backup mode: 1+1
SBCX Commissioning Guide-Frechet (28/31)
board ms state: master board run mode: act as server,and share board with OMMChange overSBCX->SCS_TestChgOver
$ cp /home/gomcr/zxgomcr/ums-svr/tools/rbbackup /home/gomcrStop all OMCR and OMCB process.$ cd /home/gomcr/ums-svr/bin$./stopall.sh$ Su – gomcb$ cd /home/gomcb/ZXGOMCB/ums-svr/bin$./ close-console-linux.sh$ps –ef|grep javaNotice:第二次安装OmmHost前必须先卸载安装,并删除/tmp目录下rb_backup.dat、rb_backup.var、rb_backup_*.log文件，重新执行主备改造脚本。#cd /home/zte/OmmHost/install/#./uninstall#rm -f /tmp/rb_backup*Create OmmHost Path and use FTP tools upload the OmmHost.zip. And unzip it.#mkdir /home/zte/OmmHost# ls -l-rwxr-xr-x 1 root root 1380008 Nov 8 12:49 OmmHost.zip#unzip OmmHost.zip# ls -ldrwxr-xr-x 3 root root 4096 Nov 26 08:34 bindrwxr-xr-x 5 root root 4096 May 16 2012 eplddrwxr-xr-x 2 root root 4096 Nov 8 12:49 installdrwxr-xr-x 2 root root 4096 May 16 2012 lib-rwxr-xr-x 1 root root 1380008 Nov 8 12:49 OmmHost.zipRoot用户运行主备脚本（注意左右板运行参数不一样，左板--left,右板--right。）#cd /home/zte/OmmHost/install#sh rb_backup.sh --leftOMCR/OMCB Backup Tool--------------------------------------------------------------------------------********************************Backup Process***********************************step 1:File sysctl.conf already configuredrb_backup_root arp success.step 2:
SBCX Commissioning Guide-Frechet (29/31)
please input OmmHost Path[/home/zte/OmmHost by default]:---------------直接回车.... Kernel Check is OK....ERROR: Module epld does not exist in /proc/modulesload ...usb2 and epld share the same irq:177Success: load EPLD driver modulego on . . .epld load success!Please ensure OMM has been installed successfully, and then reboot the system!please input SlotNo:1----------------------注意左右板子槽位，左板 1，右板 3。please input ExePath for OMCR[/home/gomcr by default]: ---------------直接回车please input ExePath for OMCB[/home/gomcb/ZXGOMCB by default]: ---------------直接回车rb_backup_root ommhost success.step 3:please input ip address for eth3:10.31.9.194---------------输入 IP后回车please input ip address for eth3:1 [10.63.208.179 by default]: 10.31.9.197-----------输入 IP后回车please input ip address for eth3:2 [10.63.208.180 by default]: 10.31.9.198-----------输入 IP后回车please input GATEWAY for eth3 [10.63.208.254 by default]: 10.31.9.193-----------输入 IP后回车please input NETMASK for eth3[255.255.255.0 by default]: 255.255.255.240----输入掩码后回车please input ip address for eth4[172.29.6.1 by default]: 139.67.0.250------------输入 IP后回车please input ip address for eth4:1[172.29.6.2 by default]: 139.67.0.252------------输入 IP后回车please input ip address for eth6[172.20.6.1 by default]: 129.0.67.2------------输入 IP后回车please input NETMASK for eth4[255.255.255.0 by default]: 255.255.255.240----输入掩码后回车please input hostname[sbcxD10 by default]: AP_BSC_267_ZTE_SAIFABA---输入主机名后回车Newline appendedrb_backup_root ip success.step 4:please input ORACLE_HOME [/oracleapp/oracle/product/10.2.0 by default]: ------------直接回车Newline appendedrb_backup_root tns success.step 5:Modify deploy-999split.properties successrb_backup_gomcr ip success.step 6:Modify deploy-010muep.properties successModify deploy-default.properties successModify set-switchusername-linux.sh successModify FtpInfo.conf successModify backup-control.properties successModify deploy-gsmomcr01.properties successModify zxgomcr-ibsc-pm-tablecollection.xml successModify ScanFilescope-040gomcr.conf successrb_backup_gomcr bak success.step 7:Modify deploy-default.properties successModify deploy-991muep.properties success
SBCX Commissioning Guide-Frechet (30/31)
Modify deploy-993muep.properties successModify deploy-991muep.properties successModify deploy-010muep.properties successModify deploy-010muep.properties successModify set-switchusername-linux.sh successModify FtpInfo.conf successModify backup-control.properties successModify deploy-999split.properties successModify deploy-020sdrmap.properties successrb_backup_gomcb bak success.Backup process recorded in log file /tmp/rb_backup_2011072010311311129095.log.
