of 6
7/30/2019 SC VersiJack en 03 13
1/6
Paver & Bearer Support
VersiJack
37 - 1016 mm
7/30/2019 SC VersiJack en 03 13
2/6
Introduction
VersiJack made of 100% recycled polypropylene eliminates need for bedding sandand/or of brick or metal piers for installation of raised pavers or decking. It eliminatesef orescence and prevents algae growth on pavers, facilitates rapid surface drainageand easy accessibility to waterproo ng membranes and concealed services. It alsoprovides a ventilation break that reduces heat and sound transmission to habitablespace below.
VersiJack is a new generation pedestal for paver and bearer support consisting ofwide range of components to cater to create different heights requirements and forprecise height adjustments. The pedestals collectively allow uninterrupted progressiveheight increase from 37 mm to 1016 mm.
VersiJack may be used with a combination of one or more accessories including aslope corrector which can be placed either on top or at the bottom of the pedestal toenable compensation up to 10%. Slope corrector at the bottom enables the pedestalto be perpendicular thus maintaining stability and compressive strength.
VersiJack basic pedestal height can be increased to above 1000 mm using only 3extenders, thus providing signi cant cost savings for pedestal heights above 500 mm.
Benefts
Maximum height of 1016 mm with only 3 extenders Precise increments from 37 - 1016 mm Slope corrector (SC) at the bottom 0-5% or top 0-10% pedestal to be perfectly upright Bearer holder (BH) suitable for bearers from 35-50 mm and 50-80 mm quickly and easily installed Locking ring for xation of adjusted height High compressive strength of up to 15 kN
Made of 100% recycled polypropylene and fully recyclable Resistant to moulds, algae, alkali and bitumen Perfect drainage and ventilation
Spacer tab
Locking ring
Extender
Base
Top
Top Slope CorrectorTop and bottem slope-correctors allowcompensation of up to 10% keeping pedestalsupright on a sloping surface, minimising possibilityof toppling.
Locking RingLocking rings ensure that the individual pedestalare secured at desired heights. They are easilyremoved when not required.
Non-Water RetentionThe base design prevents water pooling andbreeding of pests at the base ange especiallywhen installed on an incline.
Bottom Slope CorrectorVersiJack has optional slope correctors at thetop or bottom of the pedestal. The Bottom SlopeCorrector allows the pedetal to remain upright.
Bearer HolderBearer holders, a useful accessory, keep bearersrmly in place on pedestal tops. Eliminates needfor concrete or metal piers as support for deckinginstallation.
Spacer TabVersiJack has spacer tabs of various thickness(2mm - 10mm) to cater to the different gap sizebetween pavers. They are easily slotted onto thepedestal top.
Top SlopeCorrector
BearerHolder Spacer Tab
SlopeCorrector
0 - 5%
Base Flange designprevents water pooling
LockingRing
7/30/2019 SC VersiJack en 03 13
3/6
Range of products
Pedestals
Accessories
Overview
11 Models VJ-F1 till F11 Height 37-1016 mm8 Models VJ-C4 till C11 Height 125-1024 mm
VJ-125 Base withSlope Correction
Top SlopeCorrection
Bearer Holder
Turning tool adapter is available for fastand easy adjustment of pedestal with orwithout extender
VJ-F137-50 mm
VJ-F250-75 mm
VJ-F374-117 mm
VJ-F4117-201 mm
VJ-C4125-209 mm
VJ-F5197-281 mm
VJ-C5205-289 mm
VJ-F6277-446 mm
VJ-C6285-454 mm
VJ-F7357-526 mm
VJ-C7365-534 mm
VJ-F8437-691 mm
VJ-C8445-699 mm
VJ-F9517-771 mm
VJ-C9525-779 mm
VJ-F10597-936 mm
VJ-C10605-944 mm
VJ-F11677-1016 mm
VJ-C11685-1024 mm
00mm
00mm
00mm
00mm
00mm
00mm
00mm
00mm
00mm
000mm
With Slope Correction VJ-125B for Base* (VJ-117B)
15 kN
2 mm 3 mm 4 mmSpacer Tabs
6 mm 10 mm
7/30/2019 SC VersiJack en 03 13
4/6
Applications
Versatile applications such as:
Pavers & Decking around pools Pavers & Decking for roof terraces or green roofs Balconies, patios and residential property Urban walkways and plaza decks Fountain and water feature elevated areas
Only one bearer holder for bearer of 35-50mm and 50-80 mm
Technical SpecifcationsMaterial 100% Recycled
polypropyleneColour BlackSlope Correction 0 - 10% @ 1% StepMax Compressive Load ~15 kNDiameter Base 189 mm (VJ-F1/F2/F3)
202 mm (VJ-117B)228 mm (VJ-125B)
Spacer Tab Height 25 mmThickness 2/3*/4/6/10 mm
* 3 mm also in height 15 mm available
Easy installations
Positioning of Spacer Tab as per requirements in thickness from2 - 10 mm
7/30/2019 SC VersiJack en 03 13
5/6
Wall Spacer
It is used on pedestals supporting concrete, stone, tileand timber pavers. Its function is to space the paversaway from the wall or upstand to allow for expansionand contraction as well as paver movement due totraf c.
The Wall Spacer has a compressible buffer which doesnot protrude above the nished paved surface when
used with pavers over 12mm thick.Twin paver tabs on the Wall Spacer maintain a constantgap between pavers and keep them centred on thepedestal. The paver tabs are removable when used incorners.
Wall Spacers are quick to install by placing them overthe pedestals when positioning the pavers. They do notdislodge due to expansion or contraction, unlike clip-onspacers.
Made from recycled polypropylene and coloured black,they complement VersiJack and SpiraPave pedestalsto provide the perfect solution for raised paverinstallation.
Advantages:
Fits VersiJack
& Spirapave
as well as otherpedestals. Suitable for all types of pavers. Maintains gaps at the perimeter and between pavers. Buffer will not dislodge due to shrinkage. Buffer is exible with rounded edges to prevent
damage to the waterproo ng membrane. Buffer is not visible above paver surface. Cost-effective and simple installation. Environmentally-friendly.
Wall Spacer
The Wall Spacer is designed for use on pedestals to provide a permanent compressible buffer at the edge ofinstallations where pavers meet the wall or upstand to prevent damage to the waterproo ng membrane andfacilitate drainage.
Overall: 250 mm x 85 mm x 15 mm high Buffer: 78 mm x 15 mm* x 15 mm high *10 mm available
Buffer (10* or 15 mm)
Paver Tab
Paver Tab
Paver Tab Buffer
10 or 15 mm gap between paver and wall
Wall Spacer on Pedestal
7/30/2019 SC VersiJack en 03 13
6/6
S C - V e r s i J a c k - E
N - 0
3 - 1
3
Contact:
BERA B.V. (The Netherlands)t. +31 33 257 0302e. in [email protected]
BERA is the trademark o BERA B.V.o The Netherlands, a companywhich develops stabilization systems,
eco systems and prestigious outdoor livingconcepts.With the companys historical roots & wealth o know-how in landscaping and
architectural felds, they create innovativeand environmentally sustainable solutions,supplied throughout Europe, the Middle-East, South A rica and S-E Asia regions.
w w w . b e r a - b v . c o m
