+ All Categories
Home > Documents > Scaffold Alarm SPEC SHEET - Safesite Facilities Ltd · 2018-04-03 · Scaffold Alarm Scaffolding...

Scaffold Alarm SPEC SHEET - Safesite Facilities Ltd · 2018-04-03 · Scaffold Alarm Scaffolding...

Date post: 14-Apr-2020
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
3
Scaffold Alarm - SPEC SHEET
Transcript

Scaffold Alarm - SPEC SHEET

SAFE SITE FACILITIES LTD PRODUCT SPECIFICATION SHEETP-02

www.safesitefacil it ies.co.uk

Scaffold Alarm

Scaffolding alarms are becoming a necessity, not only do they protect the

building from theft of expensive materials, but more importantly it’s a useful deterrent

to warn off unwanted intrusions.

This is because scaffolding provides an ideal route into

your property that intruders can take advantage of.

In some instances, insurance companies are declaring

insurance policies invalid while scaffolding is erected

around a property that does not have an alarm fitted.

Specification Height Width Depth

198mm 80mm 108mm

Key Featuresn Siren & strobe upon alarm activation

n Wirelessly linked to our 24/7 monitoring station

n User specific codes for user identification

n Proximity tags for increased security

n Weekly log reports

n Insurance Approved Systems (NCP115)

108 mm

Alarm Side Profile Alarm Front View

198 mm

80 mm

In addition to all the above benefits, we also can arrange for an independent manned response team to respond to any activations that may occur 24/7.

SAFE SITE FACILITIES LTD PRODUCT SPECIFICATION SHEETP-03

www.safesitefacil it ies.co.uk

Scaffold Alarm

Here at SafeSite Facilities we believe that an incorrectly fitted alarm system is

as bad as not having an alarm at all.

Therefore, all our scaffold alarm equipment is of

the highest standard, using only the latest outdoor

Infrared Beam Sensors, it’s never been harder

for an intruder to avoid detection!

All our security systems can be extended at

any time, whether it’s an external keypad or

additional sensors due to scaffold adaptions.

All our alarms are installed and maintained to comply

with industry code of practice standard NCP115.

The upper infrared detection areas stays

parallel to the ground at all times, the lower

detection sensor is directed downwards at

a 45° degree angel. Both sensors must be

breached for alarm to activate.

The maximum distance covered by the infrared

sensors is 12 metres (depending on conditions).

www.safesitefacil it ies.co.uk


Recommended