+ All Categories
Home > Documents > Scale Replica Project

Scale Replica Project

Date post: 24-Feb-2016
Category:
Upload: kelvin
View: 46 times
Download: 0 times
Share this document with a friend
Description:
Scale Replica Project. Miss Petrucci’s Grade 6 Accelerated Students January 2012. Liberty Bell by Ashley Ancharski. One desk is 2 feet, so then I divided it in to 3,000,000 liberty bells. Which gave me 1,500,000, so 1,500,000 desks are 3,000,000 Liberty Bells. - PowerPoint PPT Presentation
Popular Tags:
24
Scale Replica Project Miss Petrucci’s Grade 6 Accelerated Students January 2012
Transcript
Page 1: Scale Replica Project

Scale Replica Project

Miss Petrucci’s Grade 6 Accelerated Students

January 2012

Page 2: Scale Replica Project

Liberty Bell by Ashley Ancharski

One desk is 2 feet, so then I divided it in to 3,000,000 liberty bells. Which gave me 1,500,000, so 1,500,000 desks are 3,000,000 Liberty Bells.

Location- Liberty Bell Center, Market Street & 6th street, Philadelphia, Pennsylvania Fact- The crack is 24.5 inches longScale Factor- 1cm/5inMy model is 8 cm tall

Page 3: Scale Replica Project

Alex Layton/Statue of LibertyMillion=305,000,000Scale Factor=11Location=New York CityFact=The Statue of Liberty has four toes.

Page 4: Scale Replica Project

Roman ColiseumBy : Daniel Mulraney

1 millimeter = 1 meterLocation : middle of Rome, Italy

There is 80 entrances.1,000,000 Roman Coliseums would be 48,000,000 meters

high.

Page 5: Scale Replica Project

Mt.Rushmore By: Kylie Patterson

A Million Time’s Height – about 94,697 feet

1in/250 feet Near Keystone South Dakota. George Washington's nose is 20 feet

long.

Page 6: Scale Replica Project

Benjamin Pham The Parthenon

If there were 1,000,000 Parthenon’s stacked on top of each other it would equal to 114,000,000desk sideways. The Parthenon is located in Athens, Greece. The scale factor for the height is 1cm= 25.3 ft. The scale factor for the width is 1cm= 18.3cm.Did you know that…?The Parthenon is named for the Greek term virgin’s apartment.

Page 7: Scale Replica Project

Eiffel Tower-Mia Somershoe A baseball bat is one meter long.

324,000 meters*1 baseball= 324,000 baseball bats

Paris, France 1cm to 11 meters Took 2 years and 5 days to complete.

Page 8: Scale Replica Project

EIFFEL TOWER BY ZIZI COLEMAN

Eiffel Tower

Regular size- 1,063 feet tall

Scaled size- 5.5 inches tall

Paris, France

The tower took 2 years to build

1 foot/193.27 inches

A million Eiffel Towers are 201,326 feet high

Page 9: Scale Replica Project

The north tower

• The North Twin Tower was the tallest building in the world from 1981-1983.

• The North tower was destroyed by Alkida on September 11, 2001.

• The north tower was 1368 feet tall.• It was the tallest of the two towers.• Scales factor: 200 feet=1 inch

Page 10: Scale Replica Project

Scale Factor by Samantha CorsoThe Sphinx is located in Egypt in the Giza Plateau. The nose and parts

of the Sphinx’s face was blown off the Sphinx; This is thought to be the work of certain Turkish troops using it for firing practice with

cannons although it could have been the work of the Napoleon troops during this time in Egypt.

The inside of the Sphinx is beginning to rot, and even though they keep trying to halt the rotting they are not being successful. The

Sphinx is a national landmark in Egypt because Sphinxes represent the temple guardian, and they are located In the Giza Plateau

because it is guarding Chefren’s tomb which is one of the pyramids of Giza. The face of the Sphinx is Chefren’s face itself.

The pyramids of Giza 50 meters high 22 meters long1,000,000 multiplied by 50= meters high 50000000= about miles high22 meters multiplied by 1,000,000 = meters wide = 22000000 about miles wide1 Sphinx is about 6.301 Egyptian pyramids of Giza. Scale

Factor= 2 inches=50meters=25 inches.

Page 11: Scale Replica Project

Saint Louis ArchAbby Haugan

Height-630 feetWidth- 630 feet

Cost-13 million dollarsLocated- Saint Louis, Missouri

Scale factor-

1inch=90 feet

A million saint Louis

Arch's would be

630,000,000 million tall

Interesting FactYou enter the Arch

underground!

Page 12: Scale Replica Project

CAYLA SYDOW- LIBERTY BELLA million Liberty Bells is 2840.9 miles high. That is the length of 526 ME’s.It is located in Philadelphia, Pensilvania U.S.A.3 feet per inch= scale factorReal sized one 15 feet tall and 32 feet long.The Liberty Bell has moved many times in America.

Page 13: Scale Replica Project

Khafre’s pyramid by Justice RossA million of Khafre’s pyramid stack up would be 3727680 tall. Khafre’s pyramid is 706ft The mini one is 3 inches tallAbout 146 mini pyramids can fit in the original one Pyramids were built because the Pharaohs believed that every living body was inhabited by a double, or ka.

Page 14: Scale Replica Project

Nikki Morgan- Easter Island Head

• My clay figure is 4 inches tall • The real model is 69 inches • One million Easter Island Heads on top of each

other will be 13068.1 feet high.• Is located in Easter Island • Every inch is 17.25 feet • The heaviest Easter Island Head is 89 tons

Page 15: Scale Replica Project

Leaning tower of Pisa!!!

• Taylor Molina• Location = Pisa, Italy• Times 1 Million (Leaning tower of Pisa.)• Over 35 times the size of the Eiffel Tower!!• Scale Factor = longer side = 1 in =62.0067

ft.• Shorter side = 1in = 91.64 ft. • Fact = Third oldest structure in Pisa's

Cathedral square

Page 16: Scale Replica Project

Steven Kingkiner Harry Kalas Statue Paid for by fans Scale factor= 20inches to 1 inch

Citizens Bank Park Philadelphia, Pennsylvania99 Inches Tall 33 Inches Wide1 Million Harry Kalas Statues would be 11,600,000 Feet TallI found out that 1 Million Harry Kalas Statues would be the length of the

Volga River

Page 17: Scale Replica Project

LouverBy: Joylin Jeffries

Height- 79ft

Width- 34ft

Interesting fact-The Lover wasn’t originally built with the glass pyramid around it. In 1989 the builders decided it needed a little jazzing up.

Location: The Louvre is located in Paris, France, on the right bank of the Seine River

Million measurements-79,000,000-11,302 Louvers can fit in the brim of the Grand Canyon, length wise.-33 Empire State Buildings can fit into 1 million Louvers.-8,642 Golden Gate bridges can fit into 1 million Louvers-146,920 Netbook screens (length wise) can fit into 1million Louvers

Page 18: Scale Replica Project

Taj MahalLocation- Agra, IndiaFact-• The people who made the Taj Mahal design inside and outside had

their hands cut off after the Taj Mahal was finished being constructed, so the design could not be copied.

Measurements- LxWxH 186ft.x186ft.x213ft. Central dome= 58 ft. in DiameterMillion- On top of each other is= 213,000,000 ft tall Next to each other is= 186,000,000 ft long

Tanish Hariharan

Page 19: Scale Replica Project

Najah hands statue of liberty

•One million divided by 46055= 21 ft high

• 13 cm , 11.61 scale factor • New York • It was a gift from France

Page 20: Scale Replica Project

Riley Hallock = Name

South Twin Tower = Monument25.7 = Million

1 in= 230.46 ft. = SizesNew York City, New York = Location

Ramzi Yousef detonated 1,500 pounds of explosives in the underground garage of the

South Tower. = Fact

Page 21: Scale Replica Project

Washington Monument by Andre Freire

• This is how high my building would be if 1 million were on top of each other555× 1,000,000=555,000,000

• My version would fit in the height 13330 times and 274.7 in the width

• It is located in Washington DC• The Washington Monument has 897 steps in it

Page 22: Scale Replica Project

Eiffel Tower By : Allison Coronado

Multiplied by a million = 1,050,000 ft.The Eiffel tower converted in inches = 12,600Location of the building = Paris, FranceMost interesting fact = The Eiffel Tower was built for the International Exhibition of Paris in 1889 commemorating the centenary of the French Revolution.

Page 23: Scale Replica Project

The Sphinx By Dominick Ciro

The most interesting thing I learned was that the word Sphinx means strangler.

A million Sphinx is about 12,500 feet tall.

About 6 Eiffel towers can fit into a million Sphinx.

About 8 Sphinx can fit into mount Rushmore.

The Sphinx is located in Ancient Egypt, Giza.

The total length of the Sphinx is 66ft and the width is 187ft

The scale factor is 5/15cm and reduced to 1/3 of the Sphinx.

Page 24: Scale Replica Project

LIBERTY BELL By: Kenny BeltranteA million Liberty Bell’s would be 36,000,000 inches high and 144,000,000 inches wide.My scale model of my Liberty Bell is 3 inches high and 6 inches wide and the real Liberty Bell is 36 inches high and 144 inches wide.On my scale model 1 inch of height is equal to 12 inches high on the real Liberty Bell.Also on my scale model 1 inch of width is equal to 24 inches wide on he real Liberty Bell.The location of the Liberty Bell is in Philadelphia, PA.My most interesting fact about the Liberty Bell is that it was made to celebrate the signature of the Declaration of Independence.


Recommended