SCE Guide Trainer Packages SCE Guide Trainer Packages

SCE Guide Trainer PackagesSiemens Automation Cooperates with Education (SCE)

SCE Guide Trainer Packages

Restricted / © Siemens AG 2014. All Rights Reserved. siemens.it/sce

Siemens Automation Cooperates with Education (SCE)

The Siemens SCE program offers a system for sustainable educational support which is unique worldwide.

As a technology leader, we support educational and R&D institutions with our excellent industrial know-how and a specific range of services. We support secondary and tertiary education, as well as initial non commercial training departments inrange of services. We support secondary and tertiary education, as well as initial non commercial training departments in the field of automation and drive technology.

Through cooperative partnerships, we help educators to plan their classes in a targeted, practice-oriented manner and in compliance with the curriculum.

Overview of SCE services• SCE Curriculums for classes

• SCE Trainer Packages for practice oriented education• SCE Trainer Packages for practice-oriented education

• SCE Courses for providing up-to-date technical knowledge

• SCE Support for your projects/technical books

• Complete Didactic Solutions from our partners

Restricted / © Siemens AG 2014. All Rights Reserved.

Version 05/2014Page 2 Industry Sector

• SCE Contact Partner for individual support SCE homepage siemens.it/sce

Overview / List / Graphic / Cabinet

SCE Trainer Packages for Trainers and Educators

SCE Trainer Packages are specially compiled hardware and software packages at special prices for up-to-date educational content in automation and drive technology.

> 80 Trainer Packages for practice-oriented education• Innovative hardware/software components incl. complete accessories

• Completely and functionally coordinated with one another in terms of content

Low cost original industrial components for classes• Low-cost original industrial components for classes

• Perfectly coordinated with SCE teaching material and aligned withteaching curriculums/content

• Innovative trends taken into account

SCE Trainer Packages siemens.it/sce


Version 05/2014Page 3 Industry SectorOverview / List / Graphic / Cabinet

TIA Portal siemens.com/tia-portal/details

Why do we provide SCE Trainer Packages?

Assembling individual products requires a lot of know-how and is time-consuming. We therefore mapped the relevant configurations from practical educational use in SCE packages for you.

Who are these Trainer Packages for?• For research, development and educational institutes

• For partners such as didactic OEM companies which integrate these SCE Trainer Packages into a didactic solutionSCE Trainer Packages into a didactic solution.

• For industrial and corporate initial training – with the exception of three STEP 7 Trainer Packages (see page 128).

What sho ld be considered hen sing Trainer Packages?What should be considered when using Trainer Packages? The products listed may be subject to European/German and/or

US export regulations.

The notes on the Trainer Packages must also be observed.



gTo the notes Here


Trainer Packages – OverviewNEW

SIMATIC Software STEP 7• Overview STEP 7 and SIMATIC HMI• Single-user license V13• 12-Classroom license V13• 12-Classroom upgrade-license V13

SIMATIC PLCs and Peripheries• S7-1513 PN / S7-1516 PN/DP• S7-1516F PN/DP• S7-314C-2PN/DP / S7-314C-2PN/DP (Upgrade)• S7-315F-2PN/DP

HMI (Human Machine Interface)• Overview STEP 7 and HMI• WinCC Advanced V13 / WinCC flexible 2008• WinCC Advanced V13 / WinCC flexible 2008 • Software for students

NEW

******

**pg

• Software for students V13• PID Control with SIMATIC standard• PID Control with SIMATIC modular • CFC 12-Classroom license• CFC Software for students • IE Softnet 12-Classroom license

• S7-300 Safety I/O• ET 200S PLC IM151-8 F PN/DP • ET 200S PN• ET 200S Safety I/O• S7-315T Technology• SIMATIC Embedded PLC• Soft-SPS WinAC F RTX 2010

• SIMATIC HMI TP700 /TP1500 COMFORT PANEL• WinCC V7 6er License• Upgrade WinCC V7 6er License• WinCC/Web Navigator V7 6er License• Upgrade WinCC/Web Navigator V7 6er License• WinCC/Web Navigator V7 ASIA 6er

* *

Quick Start into Automation• SIMIT SCE Simulation

Micro Automation• LOGO! 12/24V / LOGO! 230V / USB-Cable

Process Automation• Process control system PCS 7 3er License/Upgrade• Process control system PCS 7 6er License • Process control system PCS 7 AS RTX Box

SIMATIC NET• SINEMA Network Monitoring Software • CP343-1 Advanced• Switch X208• Security Switch• IWLAN• FASTCONNECT Accessories Kit

Drive Technologies• SINAMICS G120 Standard drive• LOGO! 12/24V / LOGO! 230V / USB-Cable

• LOGO! 12/24V / LOGO! 230V (ETHERNET)• Basic Panels KTP400 for LOGO!• S7-1200 PLC• Basic Panels KTP700 for S7-1200• Upgrade STEP 7 V13 Basic for S7-1200 Package

Sensor Technologies• SIMATIC VS120 Vision Sensor• SIMATIC VS130-2 Code Reader

SIMATIC RF 200/300 RFID System

FASTCONNECT Accessories Kit• Development Kit

• SINAMICS G120 Standard drive• SINAMICS S120 Servo drive• SIMOTION D410 add on for S120

Energy Efficiency *

Additional• Industrial Controls• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations**

**



• SIMATIC RF 200/300 RFID System• SIWAREX weighing systems

Energy Efficiency *


TIA Portal siemens.com/tia-portal/detailsNew / updated Packages Packages in preparation**

SCE List Trainer Packages including Order Number




Trainer Packages – GraphicNEW

SIMATIC Software (STEP 7)

ET 200S- CPU- IM 151-3PN

S7-1513 PNS7-1516 PN/DPS7-1516 FPN/DPS7-314C PN/DPS7-315FController

CP343 1Ad

S7-314CS7-300T

SIMATIC EmbeddedControllerWin AC

HMI

WinCC Prof.WinCC Advanced

SIMATIC PLCs/Peripheries

NEW

TP700TP1500

***** *

Process automationSIMATIC PCS 7

- IM 151-3PNPROFINET +CP343-1Adv.Controller ControllerWin AC

PROFINET

• SINEMA• CP343-1 Advanced• Switch X208• Security Switch SIMATIC RF300/200

SIMATIC VS 120Form Check

PROFIBUS

Quickstart into

SIMATIC NET

Micro Automation• LOGO!

S7 1200 PLC

Security Switch• IWLAN• FASTCONNECT Kit• Development Kit

SIMATIC RF300/200 SIMATIC VS130-21D/2D Code Reading

Drive TechnologiesSINAMICS

Qautomation• SIMIT SCE Simulation

Sensor Technologies

Weighing systems SIWAREX

E Effi i

Additional• Industrial Controls

*



• S7-1200 PLC• Panels KTP400/700

Energy Efficiency *


• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations

TIA Portal siemens.com/tia-portal/detailsNew / updated Packages Packages in preparation**

**

Solution Partner Workshop cabinet with SCE Trainer Packages




Energy Efficiency

• Overview

• Basic Information

• Trainer Packages



Training curriculums siemens.com/sce/modules

Energy Efficiency Basic Information

► Quick start into automation

► Engineering Software

► Energy EfficiencyDefinition of Energy Management in the Industry

Energy Management helps companies to continuously and systematically measure, analyze and improve the usage of energy Within this optimizing process Economical technical as well as legal aspects need

PLC d

► Process Automation

► Operator control & monitoring

► Micro Automation

automationthe usage of energy. Within this optimizing process. Economical, technical as well as legal aspects need to be taken into consideration.

► Sensor Technologies

► Industrial Communication

► PLCs and Peripheries

Energy Services

Services for optimization of the

Energy Management System

Technical System to measure, Energy Efficiency means the

Energy Efficiency

► Additional

► Drive Technologiesp

entire value chain from energy production till the consumer.

y ,analyze, document and visualization of the energy profile as well as monitoring and control of the energy usage in factories and buildings

gy yreduction of energy, without the reduction of the usage of the factory and the equipment.



and buildings.


Energy Efficiency Trainer Packages Overview

In PreparationIn Preparation

SW Sentron *powermanager

Sentron PAC 4200 * ProfiEnergy*



► Energy Efficiency

* PLC d




automation

Sizer *Selection of Energy Efficient Motors




► Additional

► Drive Technologies



New / updated Packages Packages in preparation**

Engineering Software

• Overview

• Overview STEP 7 and SIMATIC HMI

• Single-user license

• 12-Classroom License

• 12-Classroom upgrade-license

• PID Control with SIMATIC standard

• PID Control with SIMATIC modular

• Software for students

• CFC 12-Classroom License

• CFC Software for students

• IE Softnet 12-Classroom License



So t et C ass oo ce se



Trainer Packages Overview structure STEP 7 and SIMATIC HMI

SIMATIC Software- STEP 7 as the BasisEngineering tools for STEP 7- S7-PLCSIM Simulation of S7-300-HW

Touch- or Operator-PanelTP700 without buttonsPROFIBUS and PROFINET connection

- S7-SCL similar to Pascal- S7-GRAPH for sequence control with

IEC 61131-3 / DIN 1131-3

SIMATIC HMI software -Human Machine Interface

ETHERNET connection for Engineering Human Machine Interface

WinCC with- Advanced level- Smart Option for Panel / PC- Smart Access

OPC Interface

USB-Adapter PROFIBUS

PROFINET

- OPC-Interface

Software Engineering Tool for STEP 7- SIMATIC CFC- PID Control with SIMATIC- SIMATIC NET SOFTWARE

USB-Adapter6GK1571-0BA00-0AA0S7 RS485, PC USB

ET 200S PN IM 151-3PNIncludes 2 RJ45 PortsPackage with PROFINET

S7- ControllerPackages with PROFINETand PROFIBUS

ETHERNET connection for Engineering



including 5 m cableg

For PROFIBUS only interfacehas to b ordered separately


SIMATIC STEP 7 Professional – Software for Training1er License



► Energy EfficiencyTIA PORTAL1 x Combo-license for interchangeable usage of: SIMATIC STEP 7 Professional V13 *

STEP 7 Professional V13 * (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIMor: SIMATIC STEP 7 Professional 2010 SR3

STEP V SP3 (KOP FUP AWL) S GRAPH V 3 SP S SCL V 3 SP6 S PLCSIM V 4 SP

PLC d




automation

Check HW Compatibility for TIA Portal More

STEP 7 V5.5 SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP51 x Combo-license for interchangeable usage

of: SIMATIC STEP 7 Safety Advanced V13 *or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1

1 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2 (with Firmare V4 6)




SW functional identical to the industrial version

for TIA Portal More1 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2 (with Firmare V4.6)

Licenses only for STEP 7 Professional 2010 SR31 x SIMATIC S7-IMAP V3.0 SP31 x SIMATIC S7-Technology V4.2 SP3

► Additional

► Drive TechnologiesSystem requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1

Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!

Technical note: Authorization on USB Stick (1 Stick)Core product for vocational W ld C I d i l C l

* V13: also 64 BIT Windows 8.1 Professional, Enterprise



Technical note: Authorization on USB-Stick (1 Stick)

Order number: 6ES7822-1AA03-4YA5


World Cup Industrial ControlMore: www.siemens.com/worldskills


SIMATIC STEP 7 Professional – Software for Training12er Classroom License

12 x Combo-license for freely interchangeable usage of: SIMATIC STEP 7 Professional V13 *


STEP V SP3 (KOP FUP AWL) S GRAPH V 3 SP S SCL V 3 SP6 S PLCSIM V 4 SP

TIA PORTAL




STEP 7 V5.5 SP3 (KOP, FUP, AWL) S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP512 x Combo-license for freely interchangeable usage

of: SIMATIC STEP 7 Safety Advanced V13 * or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1

12 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2 (with Firmare V4 6)Check HW Compatibility for TIA Portal More PLC d




automation

12 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2,CU250S-2 (with Firmare V4.6) Licenses only for STEP 7 Professional 2010 SR312 x SIMATIC S7-IMAP V3.0 SP312 x SIMATIC S7-Technology V4.2 SP3

3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16) Student License


for TIA Portal More




System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, 32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1

Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!

Technical note: Authorization on USB Stick (1 Stick + 3 Sticks with 20 Software for Students)


► Additional




Technical note: Authorization on USB-Stick (1 Stick + 3 Sticks with 20 Software for Students)

Order number: 6ES7822-1BA03-4YA5 Upgrade von STEP 7 Prof. < 2010 et . <V12: 6ES7822-1AA03-4YE5



SIMATIC STEP 7 Professional Software for studentsSingle License – limited to 365 days

20 x Combo-license for interchangeable usage of: SIMATIC STEP 7 Professional V13 *


STEP 7 V5 5SP3 (KOP FUP AWL) S7 GRAPH V5 3 SP7 S7 SCL V5 3 SP6 S7 PLCSIM V5 4 SP5

TIA PORTALStudent License




STEP 7 V5. 5SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5

20 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2; CU250S-2 (with Firmare V4.6) Software functional identical to the industrial version, but is limited to 365 days through authorization

Package with: Check HW Compatibility for TIA Portal More PLC d




automation

5 * DVDs SIMATIC STEP 7 Professional 2010 SR3 , 5 * DVDs SIMATIC STEP 7 Professional V13 * 5 * DVDs SIMATIC STEP 7 Professional V13 * , PLCSIM, 5 * DVDs SIMATIC STEP 7 Basic V13 * 5 * DVDs SINAMICS Startdrive V13 *


for TIA Portal More




System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3


Technical note: Authorization on USB Stick (1 Stick)


► Additional





Order number: 6ES7822-1AC03-4YA5



SIMATIC S7 PID Control with SIMATIC Standard and Modular

Standard control 6ES7860-2AA00-4YX06 x SIMATIC S7, STANDARD PID CONTROL V5.2 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION, E-SW,

SW AND DOCU ON CD, LICENSE KEY ON USB-STICK6ES7830-2AA22-0YX0

1 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-2AA21-0YX05 x STANARD PID CONTROL V5 2 SINGLE LICENSE FOR 1 INSTALLATION R SW WITHOUT SW AND DOCU 6ES7860 2AA21 0YX1




5 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-2AA21-0YX11 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-4AA01-0YX05 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW+DOCU 6ES7860-4AA01-0YX1

6 x MODULAR PID CONTROL V5.1 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION E-SW, 6ES7830-1AA11-0YX0Modular control 6ES7860-1AA00-4YX0

PLC d




automation

, , ,SW AND DOCU ON CD

6ES7830 1AA11 0YX0

1 x MODULAR PID CONTROL, V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-1AA10-0YX05 x MOD.PID CTRL, FB V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-1AA10-0YX11 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU. ON CD 6ES7860-4AA01-0YX05 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-4AA01-0YX1






Technical note: None available

► Additional





Order number: Standard: 6ES7860-2AA00-4YX0 Modular: 6ES7860-1AA00-4YX0


SIMATIC S7 PID Control with SIMATIC Standard and Modular

Details

Standard-control consisting of:6 x parameterization setting software Version 5.26 x function block Version 5.2Integration continuous PID controller impulse controller step controller into the STEP 7

Details




Integration continuous PID controller, impulse controller, step controller into the STEP 7 application program starting from PLC SIMATIC S7-313.

Modular control consisting of:6 x Start-up-tool Version 5.16 x function block Version 5 1 PLC d




automation

6 x function block Version 5.1Extended features when used with the Standard-Module starting from PLC SIMATIC S7-313.

Each package contains additionally6 x PID Self-Tuner V5.1 for Online-parameterization and Online-adaption




p pwhile the application is running.

► Additional




SIMATIC CFC 12er Classroom License

12 x SIMATIC CFC V8.0

3 x 20 Software for Students SIMATIC CFC V8.0SW limited to 365 days through authorization20 li USB ti k

Student License




20 licenses per USB-stick.

C




automation

SW functional identical to the industrial version ► Sensor

Technologies





Technical note: Authorization on USB-Stick (1pieces)

► Additional




Technical note: Authorization on USB Stick (1pieces)

Order number: 6ES7658-1EX08-0YS5

SIMATIC CFC software for students Single license – limited to 365 days

20 x SIMATIC CFC V8.0SW limited to 365 days through authorization20 licenses per USB-stick.

Student License




C




automation

SW functional identical to the industrial version ► Sensor

Technologies





Technical note: Authorization on USB-Stick (1pieces)

► Additional




Technical note: Authorization on USB Stick (1pieces)

Order number: 6ES7658-1EX08-0YS6


SIMATIC NET Software IE Softnet 12er Classroom License

12 X 6GK1704-1CW12-0AA0 SIMATIC NET IE SOFTNET-S7 V12SIMATIC NET SOFTNET-IE S7 V12 SW F. S7-,S5-COMP.-COMM.,OPC; PG/OP-COMM.,CONF. SW, MAX 64 CONN; SINGLE LIC. F.1 INSTALLATION; R-SW, SW + ELECTR. MAN ON DVD; LICENSE KEY ON USB-STICK; CLASS A; 2-LANGUAGES (G,E); FOR 32/64BIT WIN 7 PROF/ULT

TIA PORTAL




FOR 32/64BIT: WIN 7 PROF/ULT, WINDOWS SERVER 2008 R2, SERVER 2012 FOR CP1612

Check HW Compatibility for TIA Portal More PLC d




automation


for TIA Portal More




System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1



also 64 BIT Windows 8.1 Professional, Enterprise

► Additional





Order number: 6GK1950-0BB01



Quick start into automation

• Overview

• SIMIT SCE Simulation




SIMIT SCE Simulation



► Energy Efficiency1. Create/change/test (Dongle-user/single-user license) of virtual process models (plants) in PC with SIMIT2. Test of STEP 7 program with SIMIT (campus – license) through MPI or ETHERNET/PROFINET

with a SIMATIC S7-300/400 PLC or with S7-PLCSIM (starting from Version 5.4 SP3) on the PC

I/O li it

PLC d




automationI/O limits:64 binary inputs E 0.0-E 7.7 64 binary outputs A 0.0-A 7.7 8 analog inputs EW 64-EW 788 analog outputs AW 64-AW 78400 components and controls per project




SIMIT Models fordownload Here

► Additional

► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3NET Framework Version 3.5 SP1(included in delivery SIMIT 7.0)STEP 7 Professional 2010




Technical note: Hardware USB-Dongle

Order number: See next page


SIMIT SCE Simulation License variations

SIMIT SCE V7.0 CL Campus license with one DongleOrder number: 9AP1414-2AA80

SIMIT SCE V7.0 3CL Campus license with three Dongle ► Quick start into automation



Order number: 9AP1414-2AA82

SIMIT SCE V7.0 CL Upgrade from SIMIT SCE V5.0 to Campus license with one DongleOrder number: 9AP1414-2AA81

S SC C f PLC d




automation

SIMIT SCE V7.0 3CL Upgrade from 9AP1414-2AA80 to 9AP1414-2AA82(additional deliverer of two dongles to a existing Campus license with one Dongle)Order number: 9AP1414-2AA83

SIMIT SCE V7.0 2EL two single licenses (two dongles, without possibility to generate Student model!)Order number: 9AP1414-2AA86




System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3NET Framework Version 3.5 SP1 (included in delivery SIMIT 7.0)STEP 7 Professional 2010

Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research

Order number: 9AP1414 2AA86

► Additional




g g pinstitutions and non commercial training departments!

Technical note: Hardware USB-Dongle


SIMIT SCE Simulation Use cases Campus Licenses

Educator at school „X“ Free exchange of archived SIMIT-Models Educator at school „Y“




Educator (Dongle owner):• Create, adapt, export and share models• Create own models• Export and hand-over own models• Generation of the executable simulation model for

PLC d




automation

the students with password for the unlimited use at the own campus




Test of a STEP 7 application program

Students

Executable Simulation modelwith unlimited users

Test of a STEP 7 application program

Students

► Additional




pp p g


SIMIT SCE Simulation Use cases Campus Licenses

Networked environment (UDP)

Students

Educator:► Quick start into

automation



Students

PLC d




automation

* Password:

Distributed none networked environment► Sensor

Technologies



Password:

Students

Educator:

► Additional




*The lifetime of executable simulation models is limited to 6 month and can be renewed through the owner of the Dongle as often as needed..


SIMIT SCE Simulation Student Projects with two different licenses

School-Dongle A “School-Campus”

Educator:

7 digit license key SIMIT SCE for Students► Quick start into

automation



SIMIT SCE for Students

1. Installation Run-Time Software and input of 7 digit license key from School-Dongle A and School-Dongle B

Generation of student projectpostfix = simit4S

PLC d




automation

2. SIMIT-Project with postfix simit4S Usage withpassword for 6 month without Dongle.

preceives password for students




* The life-span of the executable simulation model is limited to 6 month and can be continuously renewed by the owner of the dongle.

School-Dongle B “Additional School-Campus”

Educator:

7 digit license key

► Additional




Micro Automation

• Overview

• LOGO! 12/24V and 230V / USB-cable

• LOGO! 12/24V and 230V / ETHERNET-Interface

• Basic Panel KTP400 for LOGO! 1er

• Basic Panel KTP400 for LOGO! 6er

• Basic Panel KTP700 for S7-1200

• Upgrade STEP 7 V13 Basic for S7-1200 Package

• S7-1200

pg g




LOGO! 12/24V or 230V



► Energy EfficiencyLOGO! 12/24V 5x LOGO! 12/24 RC 6ED1052-1MD00-0BA65x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA11x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0

C




automation

LOGO! 230V 5x LOGO! 230 RC 6ED1052-1FB00-0BA65x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA11x LOGO! PC cable (USB) 6ED1057 1AA01 0BA0




1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0

LOGO! PC-cable 4x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0

► Additional

► Drive TechnologiesSystem requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, WIN7, MAC OS X, LINUX





Order number: 12/24V : 6ED1057-3SA00-0YA1 Cable-Set: 6ED1057-3SA00-0YC0 230V : 6ED1057-3SA00-0YB1


LOGO! 12/24V or 230V with ETHERNET-Interface

LOGO! 12/24V 6x LOGO! 12/24 RCE 6ED1052-1MD00-0BA76x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1




LOGO! 230V6x LOGO! 230 RCE 6ED1052-1FB00-0BA76x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1

PLC d




automation

Recommended accessory: 6AV2132-0AF00-0AA0Trainer Package: SIMATIC Basic Panel KTP400

Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M

Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit ► Sensor

Technologies



System requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, MAC OS X, LINUX


Technical note: Ethernet-cable required

► Additional




Order number: 12/24V : 6ED1057-3SA10-0YA1230V : 6ED1057-3SA10-0YB1


SIMATIC Basic Panel KTP400 for LOGO! 1er ETHERNET Version …0BA7

1 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,4" WIDESCREEN-TFT-DISPLAY,65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROMWINCC BASIC V13 / STEP 7 BASIC V13.

6AV2123-2DB03-0AX0




1 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STARAND LINE TOPOGRAPHIES;LED-DIAGNOSIS,IP20,24 V DC POWER SUPPLY,INCL. MANUAL

6GK5005-0BA00-1AB2

2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CAT 6 CROSSED TP CABLE 4X2 6XV1870 3RH60 PLC d




automation

2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M

6XV1870-3RH60

1 X SIMATIC WINCC BASIC V13 ENGINEERING-SW, FLOATING LICENSE SW AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS

6AV2100-0AA03-0AA5► Sensor

Technologies



System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)

Sales note:

Technical note:

For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!Authorization for WINCC BASIC on USB-Stick

► Additional



Version 05/2014Page 31 Industry SectorÜbersicht / Liste / Grafik / Koffer

TIA Portal siemens.de/tia-portal/detailsOrder number: 6AV2132-2DB03-0AA1

SIMATIC Basic Panel KTP400 for LOGO! 6er ETHERNET Version …0BA7

6 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,4" WIDESCREEN-TFT-DISPLAY,65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROMWINCC BASIC V13 / STEP 7 BASIC V13.

6AV2123-2DB03-0AX0




6 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STARAND LINE TOPOGRAPHIES;LED-DIAGNOSIS,IP20,24 V DC POWER SUPPLY,INCL. MANUAL

6GK5005-0BA00-1AB2





automation

12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M

6XV1870-3RH60

6 X SIMATIC WINCC BASIC V13 ENGINEERING-SW, FLOATING LICENSE SW AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS

6AV2100-0AA03-0AA5► Sensor

Technologies



System requirements: WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT)

Sales note:

Technical note:

For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!Authorization for WINCC BASIC on USB-Stick

► Additional




TIA Portal siemens.de/tia-portal/detailsOrder number: 6AV2132-2DB03-0AA0

SIMATIC Basic Panel KTP400 for LOGO! ETHERNET Version …0BA7




PLC d




automation

SIMATIC KTP400 BASIC COLOR PN 6AV2123-2DB03-0AX0

ETHERNET-Cable6XV1870-3RH60

SIMATIC WINCC BASIC V13 ENGINEERING-SW6AV2100-0AA03-0AA5

SCALANCE XB005 6GK5005-0BA00-1AB2 ► Sensor

Technologies



Package 6AV2123-2DB03-0AA1 contains 1 x

Package 6AV2123-2DB03-0AA0

Package 6AV2123-2DB03-0AA1 contains 2 x

Package 6AV2123-2DB03-0AA0

► Additional




TIA Portal siemens.de/tia-portal/details

Package 6AV2123 2DB03 0AA0 contains 6 x

Package 6AV2123 2DB03 0AA0 contains 12 x

SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC

6 X Alternative:SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 0,5A; 2 AI 0 - 10V DC, POWER SUPPLY: AC 85 - 264 V AC @ 47 - 63 HZ, PROGRAM/DATA MEMORY: 75 KB Firmware 4.0

6ES7214-1BG40-0XB0AC –Pack. 6ES7214-1BE30-4AB3




6 X Alternative:SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB Firmware 4.0

6ES7214-1AG40-0XB0DC -Pack: 6ES7214-1AE30-4AB3

6 X SIMATIC S7, STEP 7 BASIC V13 SINGLE LICENSE, E-SW, SW AND DOCU. ON DVD, CLASS A, 2 LANGUAGES (GE,EN), REFERENCE-HW:S7-1200

6ES7822-0AA03-0YA5

PLC d




automation

S t i t WINDOWS 7 (32 BIT 64 BIT) WINDOWS 8 SP1 (64 BIT)

6 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M

6XV1870-3RH60

6 X SIMATIC S7-1200, SIMULATOR MODULE, 8 CHANNEL SIMULATOR DC INPUT SWITCHES 6ES7274-1XF30-0XA0

6 X SIMATIC S7-1200, ANALOG OUTPUT SB 1232, 1 AO, +/- 10VDC (12 BIT RES.) OR 0 - 20 MA 6ES7232-4HA30-0XB0 ► Sensor Technologies



System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)


Technical note: Authorization for STEP 7 BASIC on USB-Stick

Order number: AC/DC/RLY DC/DC/DC

6x

TIA PORTAL► Additional




Order number: AC/DC/RLY DC/DC/DC6ES7214-1BE30-4AB3 6ES7214-1AE30-4AB3



SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC

Packages contains 6 times




PLC d




automation

Compact PLC6ES7214-1BG40-0XB0alternatively:6ES7214-1AG40-0XB0

SIMULATOR MODUL, 8 INPUT SWITCHES, DC INPUT 6ES7274-1XF30-0XA0

ANALOG OUTPUT, SB 1232, 1 AO, +/-10VDCOR 0 - 20 MA (11 BIT RESOULUTION)6ES7232-4HA30-0XB0




► Additional




STEP 7 BASIC V136ES7822-0AA03-0YA5

ETHERNET-CABLE6XV1870-3RH60



SIMATIC Basic Panel KTP700 for S7-1200 6er ETHERNET

6 X SIMATIC HMI, KTP700 BASIC,BASIC PANEL,KEY AND TOUCH OPERATION,7" TFT DISPLAY, 65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13,CONTAINS OPEN SOURCE SW WHICHIS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD

6AV2123-2GB03-0AX0




6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STAR-AND LINE TOPOGRAPHIES;LED-DIAGNOSIS, IP20,24 V DC POWER SUPPLY,INCL. MANUAL

6GK5005-0BA00-1AB2

PLC d




automation


6XV1870-3RH60

For engineering SIMATIC STEP 7 /WinCC V13 is absolutely necessary. Upgrade (slide 38)





Sales note:

Technical note:

For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!

Engineering Software required

► Additional




Order number: 6AV2123-2GB03-0AA0



SIMATIC Basic Panel KTP700 for S7-1200 6er ETHERNET

Package contains 6 times Contains 12 times




PLC d




automation




ETHERNET-cable6XV1870-3RH60

SIMATIC KTP700 BASIC COLOR PN 6AV2123-2GB03-0AX0

SCALANCE XB005 6GK5005-0BA00-1AB2

For engineering SIMATIC STEP 7 /WinCC V13 is absolutely necessary. Upgrade (slide 38)

► Additional





SIMATIC STEP 7 Basic V13 – Software for TrainingUpgrade

6 x STEP 7 Basic V13 Upgrade Version V10.5/ V11 /V12 to V13SIMATIC STEP 7 BASIC V13TRAINER PACK UPGRADE V13,ENGINEERING-SOFTWARE; UPGRADE FOR 6 V10.5/V11/V12 SINGLEFLOATING-> V13 FLOATING; SOFTWARE AND DOCU ON DVD;

TIA PORTAL




FLOATING > V13 FLOATING; SOFTWARE AND DOCU. ON DVD;LICENSE-KEYS ON USB; 6 LANGUAGES(GE,EN,IT,FR,SP,CH)FOR CONFIGURATION OF SIMATIC S7-1200, SIMATIC BASIC PANELS

6 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2 , CU250S-2 (with Firmware V4.6)PLC d




automation

Package with: : 2 * DVDs SIMATIC STEP 7 Basic V13, 2 * DVDs SINAMICS Startdrive V13

For Hardware Package S7-1200 (slide 34) and Basic Panel KTP400 (slide 31) and Basic Panel KTP700 (slide 36) ► Sensor Technologies





Technical note: Authorization on USB Stick

► Additional




Technical note: Authorization on USB-Stick

Order number: 6ES7822-0AA03-4YE5



Operator control & monitoring

• Overview

• Overview STEP 7 and HMI

• WinCC Advanced V13 / WinCC flexible 2008 SP3

• WinCC Advanced V13 / WinCC flexible 2008 SP 3Software for students

SIMATIC HMI TP700 / TP1500 COMFORT PANEL

• WinCC V7 SP 3 6er License

• Upgrade WinCC V7 SP 3 6er License

• SIMATIC HMI TP700 / TP1500 COMFORT PANEL

• WinCC/Web Navigator V7 SP 3 6er License

• Upgrade WinCC/Web Navigator V7 SP 3 6er License

• WinCC/Web Navigator V7 SP 3 6er License (ASIA)




Trainer Packages Overview structure STEP 7 and HMI

SIMATIC Software- STEP 7 as the BasisEngineering tools for STEP 7- S7-PLCSIM Simulation of S7-300-HW

Touch- or Operator-PanelTP700 with buttonPROFIBUS and PROFINET connection

- S7-SCL similar to Pascal- S7-GRAPH for sequence control with

IEC 61131-3 / DIN 1131-3

SIMATIC HMI software -Human Machine Interface

ETHERNET connection for Engineering Human Machine Interface

WinCC with- Advanced level- Smart Option for Panel / PC- Smart Access

OPC Interface

USB-Adapter PROFIBUS

PROFINET

- OPC-Interface

Software Engineering Tool for STEP 7- SIMATIC CFC- PID Control with SIMATIC- SIMATIC NET SOFTWARE

USB-Adapter6GK1571-0BA00-0AA0S7 RS485, PC USB

ET 200S PN IM 151-3PNIncludes 2 RJ45 PortsPackage with PROFINET

S7-300ControllerPackages with PROFINETand PROFIBUS

ETHERNET connection for Engineering



IE SOFTNET including 5 m cableg

For PROFIBUS only interfacehas to b ordered separately


SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP36er Classroom License



► Energy EfficiencyTIA PORTAL6 x Combo-license for freely interchangeable usage Engineering SWof: SIMATIC WinCC Advanced V13 *or: SIMATIC WinCC flexible 2008 SP3

6 O ti d R ti ft (D t il lid 41)

PLC d




automation6 x Options- and Runtimesoftware (Details slide 41)

Additionally included in the Full package: 6AV2102-0AA03-0AS5:2 x 20 SIMATIC WinCC Advanced V13 * / WinCC flexible 2008 SP3 for Students (Details slide 42)Software functional identical to the industrial version, but is limited to 365 days through authorization

Student License





Core product for vocational World Cup Industrial ControlMore: www.siemens.com/worldskills


for TIA Portal More

► Additional

► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1


T h i l t A th i ti USB Sti k (1 Sti k) U d t 2008 SP3 2008 V11 d V12 t Ad d V13



Technical note: Authorization on USB-Stick (1 Stick) Upgrade to 2008 SP3 2008;V11 and V12 to Advanced V13

Order number: 6AV2102-0AA03-0AS5 6AV6613-1XA01-3CS0 6AV2102-4AA03-0AS5



SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP3Option and Runtime Software

WinCC Advanced V13

WinCC RT Advanced (128 Power Tags)WinCC Recipes for RT AdvancedWinCC Logging for RT Advanced

TIA PORTAL




WinCC flexible 2008 SP3

WinCC Logging for RT AdvancedWinCC Sm@rtServer for RT AdvancedWinCC Sm@rtServer for SIMATIC Panel

PLC d




automation

WinCC flexible 2008 SP3WinCC flexible 2008 SP3 Runtime (128 Power Tags)WinCC flexible/Sm@rtAccess for PanelsWinCC flexible/Sm@rtAccess for PCWinCC flexible/Sm@rtService for Panels




WinCC flexible/Sm@rtService for PCWinCC flexible/OPC-Server for PCWinCC flexible/Archives for PCWinCC flexible/Recipes for PC

► Additional





SIMATIC HMI WinCC Advanced V13/ WinCC flexible 2008 SP3 Single License for Students – limited to 365 days

TIA PORTAL20 x Combo-license for interchangeable usage the Engineering SW of : SIMATIC WinCC Advanced V13 *or: SIMATIC WinCC flexible 2008 SP3

Li li it d t 365 d th h th i ti

Student License




Licences limited to 365 days through authorization

Runtime Licences:20 x SIMATIC WinCC RT Advanced V13 * -128 PowerTags20 x SIMATIC WinCC flexible 2008 Runtime SP3 - 128 PowerTags

Software functional identical to the industrial version, but is limited to 365 days through authorization Check HW Compatibility for TIA Portal More

Student License

PLC d




automation

Package with:10 * DVDs WinCC Advanced V13 and 10 * DVDs SIMATIC WinCC flexible 2008 SP3


for TIA Portal More




System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1


T h i l t A th i ti USB Sti k


► Additional





Order number: 6AV2102-0AA03-0AS7



SIMATIC HMI TP700 / TP1500 COMFORT, COMFORT PANELwith PROFINET and MPI/PROFIBUS DP INTERFACE

alternative:1 x 7“ SIMATIC HMI TP700 COMFORT, Touch Panel with 6AV2124-0GC01-0AX0

PROFINET and MPI/PROFIBUS DP INTERFACE (Panel with integrated Switch for 2 x RJ 45 ports)

lt ti

TIA PORTAL




alternativ:1 x 15“ SIMATIC HMI TP1500 COMFORT, Touch Panel mit 6AV2124-0QC02-0AX0

PROFINET and MPI/PROFIBUS DP INTERFACE (Panel with integrated Switch for 2 x RJ 45 ports)

Additionally the package contains Check HW Compatibility for TIA Portal More C




automation

• 1 x Engineering- Options- and Runtimesoftware SW and LicenseSIMATIC WinCC Advanced V13 (Details slide 42)

• 1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6,CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60


for TIA Portal More




The TP 700 can only be programmed and configured with SIMATIC WinCC Comfort, Advanced, Professional V11 and V12 (TIA Portal) System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1. Windows 8.1

32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1,


Technical note: Authorization on USB Stick (1 Stick)

► Additional





Order number: 6AV2133-4AF00-0AA0 (with TP700) 6AV2133-4BF00-0AA0 (with TP1500)



SIMATIC WinCC V7 SP3Classroom License

WinCC V7 – Trainer Package 6x WinCC V7.0 SP3, Complete version with RC2048 Variables

WinCC and WinCC/Web Navigator V7 – Upgrade 6 Wi CC RC d V6 0 > V7 0 SP3 V6 2 > V7 0 SP3




6 x WinCC RC upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3,Complete version RC 2048 variables

6 x WinCC/WebNavigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7 SP3

PLC d




automation







► Additional





Order number: 6AV6381-1BP07-0AX5 Upgrade: 6AV6381-1BP07-0AX3


SIMATIC WinCC/Web Navigator V7 SP3 – DiagnosticsClassroom License

WinCC/Web Navigator V7 – Trainer Package6 x WinCC V7.0 SP3, Complete version RC 2048 variables6 x WinCC/Web Navigator Diagnostics Server V7.0 SP36 x WinCC/Web Navigator Diagnostics Client V7.0 SP3 ► Quick start into

automation



WINCC and WinCC/Web Navigator V7 – Upgrade6 x WinCC RC Upgrade, V6.0 -> V7.0 SP1, V6.2 -> V7.0 SP3

version RC 2048 variables 6 x WinCC/Web Navigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3

PLC d




automation







► Additional





Order number: 6AV6371-1DH07-0AX5 Upgrade: 6AV6381-1BP07-0AX3


SIMATIC WinCC/Web Navigator V7 SP 3 ASIA – DiagnosticsClassroom License

WinCC/Web Navigator V7 – ASIA Version 6 x WinCC V7.0 SP3, Complete version RC 2048 variables6 x WinCC/Web Navigator Diagnostics Server V7.0 SP36 x WinCC/Web Navigator Diagnostics Client V7.0 SP3 ► Quick start into

automation



PLC d




automation






Technical note: License Key on USB Stick

► Additional




Technical note: License Key on USB-Stick

Order number: 6AV6371-1DH07-0AV5


Process Automation

• Overview• Process control system SIMATIC PCS 7 –

3er Software License/Upgrade3er Software License/Upgrade

• Process control system SIMATIC PCS 7 – 6er Software License

• Process control system SIMATIC PCS 7 AS RTX Box – Hardware




Process control system SIMATIC PCS 7 3er License/Upgrade



► Energy Efficiency1 x DVD: PCS 7 Software V8.0 SP11 x Paper: Certificate of License (A5E00276662)1 x Stick: License Key USB Stick with 3 * FLOATING LICENSES

PLC d




automation

Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1 available

6ES7658 4XX08 0YT8




6ES7658-4XX08-0YT8SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1SOFTWARE MEDIA WITHOUT LICENSE6ES7650-4XX08-0YT8SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0SOFTWARE MEDIA WITHOUT LICENSE

► Additional

► Drive TechnologiesSystem requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1





Order number: 6ES7650-0XX08-0YS5 Upgrade: 6ES7650-0XX17-0YE5 from V6.X to V7.16ES7650-0XX08-0YE5 from V7.1 auf V8.0


Process control system SIMATIC PCS 7 6er License

Equivalent to 2 x SIMATIC PCS 7 – 3er License

(content on page 52)




Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1 available

6ES7658 4XX08 0YT8 PLC d




automation

6ES7658-4XX08-0YT8SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1SOFTWARE MEDIA WITHOUT LICENSE6ES7650-4XX08-0YT8SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0SOFTWARE MEDIA WITHOUT LICENSE ► Sensor

Technologies



System requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1


Technical note: License Key on USB Stick

► Additional





Order number: 6ES7650-0XX17-2YS5


Process control system SIMATIC PCS 7 AS RTX BoxHardware

• 1 x SIMATIC PCS 7 AS RTX Box 427C

• 1 x ET 200M – Station with 7DE(144), 3DA(64), 1AE(8), 1AA(8) Assemblies

• 1 x SITOP power supply 20A with Front Connector and Communication Bus ► Quick start into automation



Content: see next page

Note:• PCS 7 Licences additional required (Details slide 49)• Trainer Package adjusted on PCS 7 training curriculms

C




automation




System requirements: WINDOWS XP Prof. SP3 (32 BIT), WINDOWS Server 2003 SR2, Server 2008 SR2 , WINDOWS 7 Ultimate SP1



► Additional





Order number: 6ES7654-0UE13-0XS0


Process control system SIMATIC PCS 7 AS RTX Box Hardware (1)

Details

1 x SIMATIC PCS 7 AS RTX AUTOMATION SYSTEM BASED ON IPC427C, CORE2 DUO 1.2 GHZ, 800 MHZ FSB, 3MB SLC, 2 GB DDR3 1066 SODIMM RAM, 4 GB COMPACT-FLASH CHANGEABLE, CP5611 ONBOARD, WINDOWS EMBEDDED STANDARD 2009, WINAC RTX 2010 SOFTWARE CONTROLLER, RUNTIME LICENSE AS PO100 PREINSTALLED FOR PCS 7 OPERATING, APPLICABLE EX PCS 7 V7.1 SP2 OR HIGHER

6ES7654-0UE13-0XX0

Details




HIGHER

1 x SIMATIC,STAND.SECTIONAL RAIL WIDTH 35MM, LENGTH 483MM FOR 19 IN.CABINETS 6ES5710-8MA11

1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M

6XV1870-3RH60

1 x SIMATIC NET, CONN. CABLE 830-2 F. PROFIBUS, PREASSEMBLED CABLE WITH 2 SUB-D-CONNECTORS 6XV1830-2AH50PLC d




automation

9-POLE, SWITCHABLE TERMINATING RESISTORS, 5 M

1 x SITOP PSU100M 20A STABILIZED POWER SUPPLY INPUT: 120-230 V AC 110-220 V DC OUTPUT: 24 V/20 A DC

6EP1336-3BA10

2 x SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN 6ES7321-1BL00-0AA0

1 x SIMATIC S7/PCS7, SM 321 DIGITAL INPUT MODULE, 16 DI, 24V DC, 1 X 40 PIN, CAPABLE OF 6ES7321-7TH00-0AB0► Sensor

Technologies



, , , , ,DIAGNOSTICS, FOR CONTACTS (CONNECTED/ UNCONNECTED), NAMUR SENSOR, 3/4-WIRE-BERO, WITH FLUTTER MONITORING, PULSE LENGTHENING, WIRE BREAK DETECTION, IM153-2 INTERFACE MOD. REQUIRED

6ES7321 7TH00 0AB0

4 x SIMATIC S7-300, DIGITAL INPUT SM 321, GALVANICALLY ISOLATED, 16 DI, DC 24V, 1 X 20 PIN, PROCESS INTERRUPT, DIAGNOSTICS, FIT FOR ISOCHRONE MODE

6ES7321-7BH01-0AB0

► Additional




1 x SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)

6ES7322-1BL00-0AA0


Process control system SIMATIC PCS 7 AS RTX Box Hardware (2)

Details

2 x SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF DIAGNOSTICS, WIRE BREAK DETECTION TO 0 AND 1 SIGNAL, 1 X 40-PIN, INTERFACE MODULE IM 153-X HF NECESSARY

6ES7322-8BH10-0AB0

1 x SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL, 6ES7331-7HF01-0AB0

Details




CURRENT, VOLTAGE, INTERRUPTS, DIAGNOSTICS,1 X 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE

1 x SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

6ES7332-5HF00-0AB0

5 x SIMATIC S7 300 FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS 20 PIN 6ES7392 1AJ00 0AA0 PLC d




automation

5 x SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN 6ES7392-1AJ00-0AA0

7 x SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN 6ES7392-1AM00-0AA0

1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE I/O SUBMODULES FOR INSERT/REMOVE

6ES7153-2BA02-0XB0

1 x SIMATIC DP RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195-1GG30-0XA0




1 x SIMATIC DP, RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195 1GG30 0XA0

1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR. OF 1 PS A.1 IM153 FUNCTION:INSERT/REMOVE-MODULE WHILE OPERATING MODE RUN INCL. COVER FOR BUS UNIT

6ES7195-7HA00-0XA0

6 x SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON DARY

6ES7195-7HB00-0XA0

► Additional




SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT


PLCs and Peripheries

• Overview• S7-1513 PN

• S7-314C 2PN/DP

• S7-1516 PN/DP

• S7-1516F PN/DP

• S7-314C 2PN/DP (Upgrade TIA Portal)

• S7-315F-2PN/DP

• SIMATIC ET 200S CPU IM 151-8 F PN/DP

S7-300 Safety

ET 200S Safety

• ET 200S PN

• S7-315T Technology

• SIMATIC Embedded SPS

ET 200S Safety

S7-300 Safety



• Soft-SPS WinAC F RTX 2010



SIMATIC S7-1513 PN

► Quick start intoautomation


► Energy Efficiency1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC

6EP1333-4BA00

1 X SIMATIC S7-1500, CPU 1513-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 300 KB FOR PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 40 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

6ES7513-1AL00-0AB0

PLC d




automationPERFORMANCE, SIMATIC MEMORY CARD NECESSARY1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;

INPUT DELAY 0.05... 20MS; INPUT TYPE 3 (IEC 61131); DIAGNOSIS, PROCESSALARMS6ES7521-1BL00-0AB0

1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS IN GROUPS OF 8, 4 A PER GROUP; DIAGNOSIS; SUBSTITUTE VALUE

6ES7522-1BL00-0AB0

1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS FUSES OR RELAYS

6ES7590-1AE80-0AA0




DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS2 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES, INCL. 4

JUMPERS, AND CABLE STRAP6ES7592-1AM00-0XB0

1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0

1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M

6XV1870-3RH60

► Additional

► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3


Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary




Order number: 6ES7513-1AL00-4AB0



SIMATIC S7-1513 PN




1x SIMATIC S7-1500, Rail 480 MM

1x ETHERNET-Cable1x CPU 1513-1 PN

1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V / 0 5A

1x DIGITAL-INPUT MODULEDI 32 X DC24V PLC d




automation

DQ 32 X DC24V / 0,5ADI 32 X DC24V




1x Memory Card 2x Front Connector1x Power Supply

When analog or PROFIBUS Periphery is needed –we recommend 6ES7516-3AN00-4AB1

(package with SIMATIC S7-1516 PN/DP)

► Additional




24 MB2x Front Connector

40-PolleInput AC 120/230V; Output.: DC 24V, 8A

For engineering SIMATIC STEP 7 Professional V12 SP1 is absolutely necessary


SIMATIC S7-1516 PN/DPAvailable until 31th December 2014

1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA001 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM ,

5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, 3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

6ES7516-3AN00-0AB0

1 X SIMATIC S7-1500 DIGITAL INPUT MODULE DI32 X DC24V 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB0

Available until 31th December, 2014




1 X SIMATIC S7 1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521 1BL00 0AB01 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL00-0AB01 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION,

ACCURACY 0.3 %; 8 CHANNELS 6ES7531-7KF00-0AB0

1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION,ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;

6ES7532-5HD00-0AB0

1 X SIMATIC S7-1500 MOUNTING RAIL 482 MM (APPR 19 INCH) INCL GROUNDING ELEMENT INTEGRATED 6ES7590-1AE80-0AA0 PLC d




automation

1 X SIMATIC S7 1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS

6ES7590 1AE80 0AA0

1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA04 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB01 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,

PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M6XV1870-3RH60

1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz (Details slide 14) 6ES7822-1AA03-4YA5► Sensor

Technologies



System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1



g ( )

► Additional





Order number: 6ES7516-3AN00-4AB3



SIMATIC S7-1516 PN/DPAvailable until 31th December 2014Available until 31th December, 2014




1x Power Supply Input AC: 120/230V; Output DC: 24V 8A

1x CPU 1516 PN/DP

1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V/0 5A

1x DIGITAL-INPUT MODULEDI 32 X DC24V

1x ANALOG-OUTPUT MODULEAQ 4 X U/I ST

1x ANALOG-INPUT MODULEAI 8 X U/I/RTD/TC PLC d




automation

Output DC: 24V, 8ADQ 32 X DC24V/0,5ADI 32 X DC24V AQ 4 X U/I STAI 8 X U/I/RTD/TC




1x Memory Card 24 MB

4x Front Connector40-Pole

1x SIMATIC S7-1500, Rail 480 MM

1x ETHERNET-Cable

SIMATIC STEP 7 Professional –Software for Training 1er Lizenz

► Additional





SIMATIC S7-1516F PN/DP

1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA001 X SIMATIC S7-1500F, CPU 1516F-3 PN/DP, WITH WORKING MEMORY 1,5 MB FOR PROGRAM , 5 MB FOR

DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, 3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY

6ES7516-3FN00-0AB0

1 X SIMATIC S7 1500 DIGITAL INPUT MODULE DI32 X DC24V 32 CHANNELS IN GROUPS OF 16; 6ES7521 1BL00 0AB0► Quick start into

automation



1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB01 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL00-0AB0

1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 8 CHANNELS

6ES7531-7KF00-0AB0

1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;

6ES7532-5HD00-0AB0

PLC d




automation

1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS

6ES7590-1AE80-0AA0

1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA04 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB01 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,

PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M6XV1870-3RH60 ► Sensor

Technologies



System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, Windows 8.132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1


Technical note: SIMATIC STEP 7 Professional V13 necessary

► Additional




Technical note: SIMATIC STEP 7 Professional V13 necessary

Order number: 6ES7516-3FN00-4AB1



SIMATIC S7-1516F PN/DP




1x Power Supply Input AC: 120/230V; Output DC: 24V 8A

1x CPU 1516F PN/DP

1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V/0 5A

1x DIGITAL-INPUT MODULEDI 32 X DC24V

1x ANALOG-OUTPUT MODULEAQ 4 X U/I ST

1x ANALOG-INPUT MODULEAI 8 X U/I/RTD/TC PLC d




automation

Output DC: 24V, 8ADQ 32 X DC24V/0,5ADI 32 X DC24V AQ 4 X U/I STAI 8 X U/I/RTD/TC




1x Memory 4x Front 1x SIMATIC S7 1500

1x ETHERNET

For engineering SIMATIC STEP 7 Professional and Safety Advanced

V13 is absolutely necessary

► Additional




yCard 24 MBConnector

40-PoleS7-1500, Rail 480 MM

Cable


SIMATIC S7-314C-2 PN/DP

1 X SIMATIC S7-300, CPU 314C-2 PN/DP COMP.CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 192 KBYTE

6ES7314-6EH04-0AB0

1 X SIMATIC S7-300 PS307 IN:120/230 V AC OUT: 24 V DC/5 A 6ES7307-1EA01-0AA0

2 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0► Quick start into

automation



2 X SIMATIC S7 300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40 POLE 6ES7392-1AM00-0AA0

1 X SIMATIC S7-300, SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8 INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED

6ES7374-2XH01-0AA0

1 X SIMATIC S7-300, RAIL L=480MM 6ES7390-1AE80-0AA0

1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0PLC d




automation


Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit

1 X SIMATIC S7, PC ADAPTER USB A2 FOR CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M) 6GK1571-0BA00-0AA0




System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3


Technical note: STEP 7 V5 5 V11 or V12 required

► Additional




Technical note: STEP 7 V5.5, V11 or V12 required

Order number: 6ES7314-6EH04-4AB3



SIMATIC S7-314C-2 PN/DP




1x Power Supply PS 307, AC 120/230V; DC 24V, 5A

1x Micro Memory Card 512 KByte

1x CPU314C-2 PN/DP with 192 KByte

SIMULATOR MODULE SM 374

PLC d




automation

memory




2x FRONT CONNECTOR

1x Rail L=480mmPC Adapter USB

► Additional




CONNECTORfor SM, 40-Pole


USB


SIMATIC S7-314C-2 PN/DP Upgrade Package for TIA Portal

Available until 31th December 2014

1 X SIMATIC S7-300, CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, INTEGRATED 24V DC POWER SUPPLY, FRONT CONNECTOR (2 X 40-POLE) AND MICRO MEMORY CARD REQUIRED

6ES7314-6EH04-0AB0

Available until 31th December, 2014




1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0

1 X SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1 X 40-POLE

6ES7323-1BL00-0AA0

3 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0





automation


6XV1870-3RH60


Technologies



System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1 , WINDOWS XP Professional SP3



► Additional





Order number: 6ES7314-6EH04-4AB4



SIMATIC S7-314C-2 PN/DP Upgrade Package for TIA Portal

Available until 31th December, 2014Available until 31th December, 2014




1x Micro MemoryCard

3x FRONT CONNECTOR

1x CPU314C-2 PN/DP ith 192 KB t

ETHERNET-cable6XV1870-3RH60

1x Digital Modul SM 323 16 DI and 16 DO PLC d




automation

Card 512 KByte

CONNECTORfor SM, 40-Pole

with 192 KBytememory

6XV1870 3RH60SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40 POLE




► Additional





SIMATIC S7-315F-2 PN/DP – PROFINET

1 x Rail L=480mm 6ES7390-1AE80-0AA0

1 x Power Supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0

1 x CPU315F-2 PN/DP with 512 KByte, Working Memory 6ES7315-2FJ14-0AB0► Quick start into

automation



1 x Micro Memory Card 512 KByte 6ES7953-8LJ30-0AA0

1 x Digital Module Input/Output SM 323, 16 DE and 16 DA, C 24V, 0,5A, 40 POLIG 6ES7323-1BL00-0AA0

1 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0

1 x Analog Module Input/Output SM 334, 4 AE/2 AA, 20-Pole 6ES7334-0CE01-0AA0

1 F t C t f SM 20 P l 6ES7392 1AJ00 0AA0 PLC d




automation

1 x Front Connector for SM, 20-Pole 6ES7392-1AJ00-0AA0

1 x Distributed Safety V5.4, Floating License 6ES7833-1FC02-0YA5Complementary to:

Trainer Package F-Technology S7-300 – PROFINET6ES7326-2FS00-4AB1



Technologies





Technical note: STEP 7 V5 5 V11 or V12 requiredCore product for vocational W ld C I d i l C l

► Additional





Order number: 6ES7315-2FH14-4AB1




SIMATIC S7-315F-2 PN/DP – PROFINET




1x Rail L = 480mm1x Power Supply PS 307, AC 120/230V; DC 24V, 5A

1x CPU315F-2 PN/DP with 512 KByte Memory


PLC d




automation




1x Front Connector for SM, 40-Pole

1x Digital Module SM 323, 16 DI and 16 DO, DC 24V,0,5A, 40-Pole

1x Analog Module SM 334,4 AE/2 AA, 20-Pole


1x Distributed Safety V5.4,Floating License

► Additional








SIMATIC S7-300 F-Technology Safety In-/Output Module

1 x F-Digital Input SM 326, 24 DE 6ES7326-1BK02-0AB0

1 x F-Digital Output SM 326, 8 DA; DC 24V, 2A 6ES7326-2BF41-0AB0

1 x Separator Module 6ES7195-7KF00-0XA0

C f S S► Quick start into

automation



2 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0

PLC d




automation

Complementary to:Trainer Package

CPU315F-2 PN/DP – PROFINET6ES7315-2FH14-4AB1

Complementary to:Trainer Package

S7-mEC - modular Embedded6ES7677-1FD00-4AB1




System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3


Technical note: Safety CPU required

► Additional




Technical note: Safety-CPU required

Order number: 6ES7326-2FS00-4AB1



SIMATIC S7-300 F-Technology




PLC d




automation

1x F-Digital Input SM 326,24 DE

1x F-Digital Output SM 326,

8 DA DC 24V 2A

1x Separator Module2x Front Connector for SM, 40-Pole




24 DE 8 DA; DC 24V, 2A

► Additional





SIMATIC ET 200S PLC IM 151-8 F PN/DP


1 X IM151-8 F-CPU PN/DP192 KB PN-Interface with 3 RJ45 Ports 6ES7151-8FB01-0AB01 X DP-MASTER INTERFACE 6ES7138-4HA00-0AB02 X POWERMODUL PM-E, DC 24V/8A RO FOR ELECTRONIC MODULE W. DIAGNOSIS 6ES7138-4CA80-0AB020 X (5 X 4) DI HIGH FEATURE DC 24V 6ES7131-4BD01-0AB0 ► Quick start into

automation



Complementary to:TP F-Technik ET 200S PN -

PROFINET


20 X (5 X 4) DO HIGH FEATURE DC 24V/0,5A, 6ES7132-4BD00-0AB01 X 6ES7138-4GA50-0AB04 X (2 X 2) AI U HIGH FEATURE 6ES7134-4LB02-0AB02 X AO U HIGH FEATURE 6ES7135-4LB02-0AB01 X COUNT 24V/100KHZ, 6ES7138-4DA04-0AB015 X (3 X 5) 5 UNIVERSAL TERMINALMODULE TM E15S26 A1 6ES7193 4CA40 0AA0

ELEKTRONIC MODULE, 4SI IO-LINK, 4 POINT TO POINT INTERFACES

PLC d




automation

6ES7138-4FS01-4AB115 X (3 X 5) 5 UNIVERSAL-TERMINALMODULE TM-E15S26-A1 6ES7193-4CA40-0AA02 X TERMINALMODUL TM-P15S23-A0 6ES7193-4CD20-0AA01 X MICRO MEMORY CARD 512 KBYTE, 6ES7953-8LJ30-0AA01 X STAND.SECTIONAL RAIL . 483MM (19"), 6ES5710-8MA111 X S7 DISTRIBUTED SAFETY V5.4 6ES7833-1FC02-0YA5 ► Sensor

Technologies






► Additional





Order number : 6ES7151-8FB00-4AB1



SIMATIC ET 200S PLC IM 151 F PN/DP






1x Standard Section Rail 35mm, L=483mm for 19"-Schränke

15 (3 X 5) UNIVERSAL TERMINALMODULE TM-E15S26-A12 X TERMINALMODUL TM-P15S23-A0

PLC d




automation

1 IM151 8 F CPU PN/DP 1 DP M t I t f 1 I/O Li k M t




2 X POWERMODUL PM-E, 20 (5 X 4) DI HIGH FEATURE DC 24V20 (5 X 4) DO STANDARD DC 24V/0,5A,2 DO RELAY(SWITCH) 4 (2 X 2) AI U HIGH FEATURE 2 AO U HIGH FEATURE

1 x IM151-8 F-CPU PN/DP 1x DP-Master Interface 1 x I/O-Link Master


Recommended accessory: 6GK1950-0BB00

Recommended accessory: 6EP1332-2BA20 SITOP PSU100S STABILIZED POWER SUPPLY INPUT: AC 120/230 V OUTPUT: DC 24 V/2,5 AAlternativ: 6EP1333-2BA20SITOP PSU100S STABILIZED POWER SUPPLY INPUT: AC 120/230 V OUTPUT: DC 24 V/5 A

► Additional




1 X COUNT 24V/100KHZ


Trainer Package: FASTCONNECT Accessories Kit


SIMATIC ET 200S PN – PROFINET

1 x ET 200S, Digital Input, 2DI HF, DC 24V, 5ST. (Total 10 DE) 6ES7131-4BB01-0AB0

1 x ET 200S, Digital Output, 2DO HF,DC24V, 0,5A, 5ST. (Total 10 DA) 6ES7132-4BB01-0AB0

2 x ET 200S, Power Module. PM-E, DC 24-48V 6ES7138-4CA50-0AB0

S S S ( ) S C► Quick start into

automation



2 x ET 200S, Terminal Module, TM-E15S24-A1 5ST. (Total 10) 6ES7193-4CA20-0AA0

2 x ET 200S, Terminal Module, TM-P15S23-A0 6ES7193-4CD20-0AA0

1 x ET 200S, Interface Module IM151-3 PN HF 2 Bus Interfacing about RJ45 6ES7151-3BA23-0AB0

1 x Micro Memory Card 64 KByte 6ES7953-8LF30-0AA0

1 x Stand Sectional Rail 35mm L 483mm for 19" Cabinets 6ES5710 8MA11 PLC d




automation

Complementary to: Trainer Package F-Technology ET 200S PN - PROFINET

6ES7138-4FS00-4AB1

Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMB-LED WITH 2 RJ45 CONNECTORS, LENGTH 6 M


1 x Stand Sectional Rail 35mm, L=483mm for 19"-Cabinets 6ES5710-8MA11







► Additional





Order number: 6ES7151-3BA20-4AB1



SIMATIC ET 200S PN





1x ET 200S, Digital Input, 2DI HF, DC 24V, 5ST. (Total 10 DE)

1x ET 200S, Digital Output, 2DO HF,DC24V, 0,5A, 5ST. (Total 10 DA)

1x Stand Sectional Rail 35mm,L=483mm for 19"-Cabinets

PLC d




automation




2x ET 200S, Power Module.PM-E, DC 24-48V

2x ET 200S, Terminal Module, TM-E15S24-A1 5ST. (Total 10)

2x ET 200S, Terminal Module, TM-P15S23-A0

1x ET 200S, Interfacing Module IM151-3 PN HF two bus connections at RJ45

Recommended accessory: 6XV1870-3RH60 Recommended accessory: 6GK1950-0BB00

► Additional




ySIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M

yTrainer Package:FASTCONNECT Accessories Kit



SIMATIC ET 200S F-Technology Safety In-/Output Module

1 x ET 200S, F-Digital Input, 4/8 F-DI, DC 24V 6ES7138-4FA04-0AB0

1 x ET 200S, F-Digital Output, 4 F-DO, DC 24V/2A 6ES7138-4FB03-0AB0

1 x ET 200S, F-Relay Output 1 F-RO DC 2 Closer 24V/5A AC24V..230/5A 6ES7138-4FR00-0AA0

S S S CG► Quick start into

automation



3 x ET 200S, Terminal Module, TM-E30S44-01 6ES7193-4CG20-0AA0

PLC d




automation

Complementary to: Trainer PackageET 200S PN - PROFINET6ES7151-3BA20-4AB1

Complementary to: Trainer PackageET 200S CPU IM 151 PN/DP

6ES7151-8FB00-4AB1► Sensor

Technologies





Technical note: Safety CPU required

► Additional




Technical note: Safety-CPU required

Order number: 6ES7138-4FS01-4AB1



SIMATIC ET 200S F-Technology




PLC d




automation

1x ET 200S, F-Digital Input,

1x ET 200S, F-Digital Output,4 F DO DC 24V/2A

3x ET 200S, Terminal Module,TM E30S44 01

1x ET 200S, 1 Relaisausgang 1 F RO DC (2 S hli ß )




4/8 F-DI, DC 24V 4 F-DO, DC 24V/2A TM-E30S44-011 F-RO DC (2 Schließer)24V/5A AC24V..230/5A

► Additional





SIMATIC S7-315T Technology-PLC Motion Control

1 x Rail L=480mm 6ES7390-1AE80-0AA01 x power supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA01 x 315T-3 PN/DP with 384 KByte main memory 6ES7315-7TJ10-0AB0 2 x Front connector for CPU, 40-Pole 6ES7392-1AM00-0AA0 ► Quick start into

automation



1 x Micro Memory Card 8 MByte 6ES7953-8LP31-0AA01 x Digital Module SM 323, 16 DE and 16 DA, DC 24V, 0,5A, 40-Pole 6ES7323-1BL00-0AA01 x SIMATIC S7-300, Interface Module IM174 6ES7174-0AA10-0AA0

for connecting analog drives and Step Drives via isochronous PROFIBUS 1 x Front Connector for IM, 40-Pole- 6ES7392-1AM00-0AA0

PLC d




automation

,1 x SIMATIC NET, connection cable 830-2 for PROFIBUS, 6XV1830-2AH30

preassembled cable, two Sub-D-connectors 9-Pole, switchable terminating resistors, 3m1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60

PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M1 x SIMATIC S7, S7-Technology V4.2, SP3 Optional Package for STEP 7, Floating License 6ES7864-1CC42-0YA5




System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3


Technical note: STEP 7 V5 5 required

► Additional




Technical note: STEP 7 V5.5 required

Order number: 6ES7315-7TJ10-0AB1



SIMATIC S7-315T Technology-PLC Motion Control




1x Power Supply PS 307, AC 120/230V; DC 24V, 5A

1x 315T-3 PN/DPwith 384 KByteWorking Memory

1x Rail L=480mm

1x Micro Memory Card 8 MByte

PLC d




automation





1x Digital Module SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40-Pole

1x SIMATIC S7-300, Interface Module IM174, Connection for analogDrives and Step Drivesvia isochronous PROFIBUS

1x SIMATIC S7, S7-Technology V4.2 SP3 Options Package at STEP 7, Floating License

1x ETHERNETCable ► Additional




via isochronous PROFIBUS Floating License



SIMATIC S7-mEC – Modular Embedded

1 X EC31-RTX F, 1 GB RAM, 4 GB FLASH DISK WITH PREINSTALLED SW: WINDOWS XP EMBEDDED; SIMATIC WINAC RTX F, SIMATIC SOFTNET-S7/ LEAN, INTERFACES: 1. IF: 2X PROFINET, 2. IF: 1X FAST ETHERNET, 3. IF: 2 X USB, MMC SLOT, DOCUMENTATION ON CD/DVD, RESTORE CD/DVD

6ES7677-1FD10-0FB0

1 X EXTENSION MODULE FOR UP TO 3 ADDITIONAL PCI-104 CARDS, (USING OF PC/104 PLUS CARDS WITH ADDITIONAL ADAPTER POSSIBLE)

6ES7677-1DD40-1AA0

1 X EXTENSION MODULE FOR ADDITIONAL CONNECTORS 2 X USB 1 X ETHERNET GB 1 X COM 1 X DVI I 1 X SLOT CF 1 X SLOT 6ES7677 1DD50 2AA0► Quick start into

automation



1 X EXTENSION MODULE FOR ADDITIONAL CONNECTORS 2 X USB, 1 X ETHERNET GB, 1 X COM, 1 X DVI-I, 1 X SLOT CF 1 X SLOT SD/MMC

6ES7677-1DD50-2AA0

1 X SIMATIC S7-300, RAIL L=2000MM 6ES7390-1BC00-0AA01 X POWER SUPPLY PS307 INPUT: 120/230V AC OUTPUT: DC 24 V DC/10 A 6ES7307-1KA02-0AA01 X DIGITAL MODULE SM 323, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A 6ES7323-1BL00-0AA01 X ANALOG MODULE SM 334, 4 AI/2 AO, 1 X 20 POLE 6ES7334-0CE01-0AA0

PLC d




automation

1 X SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP 8 INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED

6ES7374-2XH01-0AA0

1 X FRONT CONNECTOR WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA01 X FRONT CONNECTOR WITH SCREW CONTACTS, 20-POLE 6ES7392-1AJ00-0AA01 X WINAC ODK V4.2, SINGLE LICENSE FOR 1 INSTALL., E-SW, SW AND DOCU ON CD 6ES7806-1CC03-0BA01 X F PROGRAMMING TOOL DISTRIBUTED SAFETY V5.4, FLOATING LICENSE FOR 1 USER 6ES7833-1FC02-0YA5




System requirements:

Sales note:

32 BIT: Windows 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3

For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!

Technical note: STEP 7 V5 5 V11 or V12 required Complementary to: Trainer Package

► Additional





Order number: 6ES7677-1FD00-4AB1

p y gF-Technology S7-300 –

PROFINET 6ES7326-2FS00-4AB1



SIMATIC S7-mEC – Modular Embedded

SIMATIC S7-mECCombines the advantages of S7-Controller with a PC-based control PC-based control solution. You can automate a variety of tasks on a hardware solution will be integrated. S7-mEC is characterized by its modular construction method in the S7-300-design and with S7-300 modules. HW base is the latest PC technology.




1x Power Supply PS 307, AC 120/230V; DC 24V 10A

1x EC31-RTX F 1x Analog Module SM 334,4 AE/2 AA 20 Pole

1x Digital Module SM 323, 16 DI and 16 DO DC 24V

1 x Simulator ModuleSM 374 PLC d




automation

AC 120/230V; DC 24V, 10A 4 AE/2 AA, 20-Pole16 DI and 16 DO, DC 24V,0,5A, 40-Pole

SM 374




1x Rail L = 2000mm1x Front Connector for SM, 40-Pole



1x WINAC ODK V4.2, Single License

Recommended accessory: 6XV1870-3RH60 Recommended accessory: 6GK1950-

► Additional




SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M

0BB00Trainer Package:FASTCONNECT Accessories Kit



SIMATIC WinAC RTX F 2010 PC-based Control

1x WinAC Basis RTX F 2010 (6ES7671-1RC08-0YA0)

1x CP 5622 PCI EXPRESS X1-CARD FOR CONNECTING A PG OR PCWITH PCI EXPRESS-BUS TO PROFIBUS OR MPI (6GK1562-2AA00)

Single License for 1 Installation► Quick start into

automation



Single License for 1 Installation

Runtime-SW, SW and

Documentation on DVD

SW-Class A, 3-speaking (D,E,F)

Reference-Hardware: SIMATIC PC, SIMATIC S7-mECPLC d




automation

Reference Hardware: SIMATIC PC, SIMATIC S7 mEC




System requirements: 32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3, INTERVALZERO RTX



► Additional





Order number: 6ES7671-1RC08-0YS0



Industrial Communication

• Overview

• SINEMA Network Monitoring Software

• CP343-1 Advanced

• Switch X208

• Security Switch

• FASTCONNECT Accessories Kit

• IWLAN

• Development Kit




SINEMA V12 – Network Monitoring Software



► Energy Efficiency6 X SINEMA SERVER BASIC-50 V12 6GK1781-1BA12-0AA0SINEMA SERVER 50 V12 NETWORK MONITORING SOFTWARE FOR 50 IP DEVICES VIA WEB BROWSER AUTOM. RECOGNITION+DISPLAY OF IE/PNIO/WLAN DEVICES+ TOPOLOGY IN NET. HMI INTEGRATION VIA OPC/HTTP(S). REPORTING, STATISTICS + ALARMS SERVER OVERVIEW + ADAPTABLE PROFILES, SW, MANUAL (DVD) + SINGLE LICENSE (USB) CLASS A LANGUAGES (G E FR CH) WIN XP+SP3 WIN 7+SP1

TIA PORTAL

PLC d




automationMANUAL (DVD) + SINGLE LICENSE (USB) CLASS A, LANGUAGES (G,E,FR,CH); WIN XP+SP3 WIN 7+SP1 (32/64 BIT) + WIN SERVER 2008 R2+SP1






for TIA Portal More

► Additional

► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3









SIMATIC CP343-1 Advanced

1 x SIMATIC CP 343-1 Advanced 6GK7343-1GX31-0XE0SIMATIC NET CP 343-1 ADVANCED; FOR CONNECTING SIMATIC S7-300 CPU TO IND. ETHERNET; PROFINET I/O CONTROLLER AND/OR IO-DEVICE; RT AND IRT MRP, PROFINET CBA; TCP/IP; ISO,UDP,S7-COM,S5-KOMP. COM., (SEND/RECEIVE) W. FETCH/WRITE WITH AND WITHOUT RFC 1006, MULTICAST DIAGNOSIS EXTENSION, SNMP DHCP FTP CLIENT/SERVER E MAIL GIGABIT SS1X RJ45 (10/100/1000) PROFINET SS 2X




SNMP, DHCP, FTP CLIENT/SERVER, E-MAIL, GIGABIT-SS1X RJ45 (10/100/1000) PROFINET-SS 2X RJ45(10/100MBIT) PROFINET CBA; SECURITY (FIREWALL/VPN); PROFIENERGY

C




automation






System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3



► Additional





Order number: 6GK1950-0AA07



Switch Technologies – Scalance X208 / SIMATIC NET

1 x SCALANCE X208 6GK5208-0BA10-2AA3SIMATIC NET, SCALANCE X208, MANAGED IE SWITCH, 8 X 10/100MBIT/S RJ45 PORTS, LED DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY, PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, INCL ELECTRONIC MANUAL ON CD




INCL. ELECTRONIC MANUAL ON CD

1 x SIMATIC NET, C-PLUG 6GK1900-0AB00SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE, FOR STORAGE OF CONFIGURATION OR USER DATA, APPLICATION IN SIMATIC NET PRODUCTS WITH C-PLUG SLOT

C




automation








Technical note: None availableCore product for vocational W ld C I d i l C l

► Additional









Industrial Security Switch Technologies – SCALANCE S623

2 x SIMATIC NET SCALANCE S 623 6GK5623-0BA10-2AA3SCALANCE S 623 MODULE FOR PROTECTION OF UNITS AND NETWORKS IN AUTOMATION TECHNOLOGY AND FOR PROTECTION OF INDUSTRIAL COMMUNICATION VIA VPN AND FIREWALL; ADDITIONAL DMZ-PORT FOR CONNECTING AN ADDITIONAL NETWORK ADDITIONAL FUNCTIONS: ADDRESS CONVERSION ► Quick start into

automation



1 x SOFTNET SECURITY CLIENT V4 + HF1 6GK1704-1VW04-0AA0SIMATIC NET INDUSTR. ETHERNET SOFTNET SECURITY CLIENT V4+HF1 SW FOR CONFIGURING SAFE IP BASED VPN-CONNECTIONS FROM PC/PG TO NETWORK SEGMENTS, WHICH ARE FUSED BY SCALANCE S, SINGLE LICENSE F.1 INSTALLATION R-SW, SW + ELECTR. MAN. ON CD SW 2-LANGUAGES (G,E); MANUAL 5-LANG. (G, E, F, I, S) FOR WINDOWS 7 ULTIMATE, PROFESSIONAL, AND 32BIT WINDOWS XP PRO+SP3

C




automation

2 x SIMATIC NET, C-PLUG 6GK1900-0AB00SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE, FOR STORAGE OF CONFIGURATION OR USER DATA









► Additional








SIMATIC NET – IWLAN

1 x 6GK1782-0AA00-6AA0SINEMA E STANDARD ENGINEERING SOFTWARE FOR PLANNING + AUTOPLACEMENT + CONFIGURATIONSIMULATION + OPTIMIZATION + SITE SURVEY OF WLAN SOFTWARE + MANUAL ON CD SINGLE LICENSE ON USB1 x 6GK5788-2AA60-6AA0 (ROW Version) or 6GK5788-2AA60-6AB0 (USA Version)SIMATIC NET IWLAN DUAL ACCESS POINT SCALANCE W788 2RR 2 RADIO INTERFACES IEEE 802 11 B/G/A/H INDUSTRIAL




SIMATIC NET, IWLAN DUAL ACCESS POINT SCALANCE W788-2RR, 2 RADIO INTERFACES, IEEE 802.11 B/G/A/H, INDUSTRIAL WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), 2.4/5 GHZ, UP TO 54MBIT/S, WPA2/802.11I/11E, 2XANT 795-4MR, IP67 HYBRID PLUG CONNECTOR, MANUAL ON CD2 x 6GK5747-1AA60-6AA0 (ROW Version) or 6GK5747-1AA60-6AB0 (USA Version)SIMATIC NET, IWLAN RR ETHERNET CLIENT MODULE SCALANCE W747-1RR, 1 RADIO INTERFACE, IEEE 802.11B/G/A/H, INDUSTRIAL WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), INCLUDES 2XANT 795-4MR, IP67 HYBRID PLUG CONNECTOR 3 SIMATIC NET C PLUG 6GK1900 0AB00 C




automation

3 x SIMATIC NET, C-PLUG 6GK1900-0AB001 x 6GK1907-0DC10-6AA3SIMATIC NET, IE POWER M12 CABLE CONN. PRO - SOCKET FOR CONNECT. OF SCALANCE W-700/X208PRO FOR 24VDC VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PIECES 20 M 6XV1812-8A SIMATIC NET ENERGY CABLE, 2X0,75





System requirements: 32 BIT: Windows Vista Business SP1, Ultimate SP1, WINDOWS XP Professional SP3

Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments


FASTCONNECT Accessories Kit

► Additional





Order number: 6GK1950-0BB04 (ROW-Version) 6GK1950-0BB05 (USA-Version)



FASTCONNECT Accessories Kit

1 X 6GK1901-1GA00 FASTCONNECT STRIPPING TOOL

2 X 6GK1901-1BB10-2AB0 SIMATIC NET IE FC RJ45 PLUG 180 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2, 180 DGR CABLE OUTLET 1 PACK = 10 PCS

4 X 6GK1901 1BB20 2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2 RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL► Quick start into

automation



4 X 6GK1901-1BB20-2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2 90 DGR CABLE OUTLET 1 PACK = 1 PCS

1 X 6GK1901-0DB20-6AA8 SIMATIC NET IE FC M12 PLUG PRO M12 PLUG CONNECTOR WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD, WITH AXIAL CABLE OUTLET (D CODED)1 PACKAGE = 8 PCS FOR SCALANCE X208 PRO AND ET 200 PRO PN

G C C CO O SOC O CO C O O SC C / O O C PLC d




automation

1 X 6GK1907-0DC10-6AA3 M12 CABLE CONN. PRO - SOCKET FOR CONNECTION OF SCALANCE W-700/X208PRO FOR 24V DC VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PCS

1 X 50 M - 6XV1870-2B FLEXIBLE CABLE, GP 2X2 TP INSTALLATION CABLE WITH FLEXIBLE STRAND, PROFINET TYP B, 4WIRE

2 X 6XV1870-3RH60 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M




System requirements: None



► Additional





Order number : 6GK1950-0BB00


Development Kit – PROFINET & PROFISAFE

1 x SIMATIC NET, DK-ERTEC 200 PN IO 6GK1953-0BA00 DVELOPMENT PACKAGE FOR PN IO DEVICE BASED ON ERTEC 200 INCL 10 ERTEC 200,EVALUATION BOARD EB 200,TEST APPLICATION SOFTWARE IE FC PLUG




TEST-APPLICATION SOFTWARE,IE FC PLUG, CABLE, STRIPPING TOOL, CP 1616, DK-16XX PN IO, DOKU, V2.0 RT AND IRT FUNCTIONALITY

O S S S PLC d




automation

More in Internet Here

1 x PROFISAFE-STARTERKIT V3.4 6ES7195-3BF02-0YA0(FOR V1-MODE AND V2-MODE PROFISAFE-DEVICES)





Technical note: Support by ComDeC - Communication Development & Certification www.siemens.com/comdec

More in Internet Here

► Additional




Technical note: Support by ComDeC Communication, Development & Certification www.siemens.com/comdec

Order number: 6ES7195-3BT02-0YA0


Development Kit – PROFIsafe-Starterkit Hardware

CP1616• A PCI-card for the usage inside the PC as PROFINET IO Controller (test partner) • The Evaluation Board 200 (EB 200) (for DK-ERTEC 200 PN IO V3.2)• A testing environment for PROFINET IO Devices for custom based applications. ► Quick start into

automation



ERTEC ASICs• For the development of custom based Hardware are included 10x ERTEC 200 (- for DK-ERTEC 200 PN IO V3.2)

PROFINET cabling/ -plugs• For the configuration of a PROFINET cable are per Development Kit two FASTCONNECT plugs, one PROFINET cable, as well as one

PLC d




automation

Stripping Tool included.

Power Supply• Every Development Kit contains one Universal AC adaptor to power the Evaluation Boards.

Documentation► Sensor

Technologies



Documentation• Comprehensive range of documentation in English and German language is included on the CD.

Software• DK-ERTEC 200 PN IO V3.2 • PROFINET Device Stack including application examples in source code to port to the included Evaluation Board;

DK 16xx PN IO;

► Additional




• DK-16xx PN IO;• Firmware to engineer the test partner of the CP1616 to use with Linux or WINDOWS XP, or to port to other PC-based operating systems


Development Kit – PROFIsafe-Starterkit DetailsDetails

• Current PROFIsafe-specifications with current PROFIsafe-certificates

• PROFIsafe-driver-Software (as core components of the development kit) Example-GSD-File for STEP 7 (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) E l P j t f S7 319F (f PROFIBUS DP/PA d l t kit DK ERTEC 200 PN IO)




Example-Project for S7-319F (for PROFIBUS DP/PA development kit DK-ERTEC 200 PN IO)

• GSD-Tools (i.e. GSD Editor and CRC-calculation-Tool)

• iParServer-Software and Tutorial (FB24)

• Tool-Calling-Interface-Example and TutorialPLC d




automation

g p

• F-Programming-Guidelines

• Layer stack (V1SL and PN IO)

• Example-Firmware (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) P j t f l f li ti d l t t i t (f PROFIBUS DP/PA d l t kit d DK




Project for example for application development system environment (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) Slow-Motion-Monitor (for PROFIBUS: PG-PC and CP5613, for PROFINET: PG-CP1616)

• Extensive documentation

► Additional




Sensor Technologies

• Overview

• SIMATIC VS120 Vision Sensor

• SIMATIC VS130-2 Codeleser

• SIMATIC RF300 RFID System• SIMATIC RF200 RFID System

• SIWAREX weighing systems




SIMATIC Vision Sensor (VS120) – Form Check



► Energy Efficiency1 x SIMATIC VS120 evaluation device 6GF1018-2AA10

1 x SIMATIC Vision Sensor VS120, documentation package 6GF7021-1AA10

1 x Lens 12mm 6GF9001-1BL01 x Sensor Head white Light C/CS-Mount 6GF2002-8CB

PLC d




automationx Sensor Head white Light C/CS-Mount 6GF2002-8CB

1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA

1 x SIMATIC VS, communications cable, 10m 6GF9002-8CB

1 x SIMATIC VS, Sensor-Cable, 2,5m 6GF9002-8CD

1 x Light red, diffuse 6GF9004-8BA




1 x Light red, diffuse 6GF9004 8BA

1 x Light Cable 6GF9002-8CE

1 x Intermediate Ring 6GF9001-1BU

Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CROSSED

Recommended accessory: 6GK1950-0BB00Trainer Package:

► Additional



Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM (MS, SUN) STEP 7 V5.4 + SP 5 is required


Trainer Package:FASTCONNECT Accessories Kit



STEP 7 V5.4 SP 5 is required

Order number: 6GF9010-1AA00-0AA0


SIMATIC Vision Sensor (VS120) – Form CheckContentContent




1x Light red, diffuse6GF9004-8BA

1x Sensor Head C/CS-Mount6GF2002-8CB

PLC d




automation




1x Lens 12mm6GF9001-1BL01

1x SIMATIC VS120 Evaluation device 6GF1018-2AA10

Recommended accessory: 6XV1870-3RH60 Recommended accessory:

► Additional





6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit


SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)

1 x SIMATIC VS130-2 evaluation device 6GF1018-3BA

1 x SIMATIC Vision Sensor VS130-2, documentation packages 6GF7031-1BA

1 x Lens 15mm 6GF9001-1BG01

S C/CS G C► Quick start into

automation



1 x Sensor Head White Light C/CS-Mount 6GF2002-8CB

1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA

1 x SIMATIC VS, Communications-Cable, 10m 6GF9002-8CB

1 x SIMATIC VS, Sensor Cable, 2,5m 6GF9002-8CD

1 x Light red diffuse 6GF9004 8BA

Barcode(1D-Code)

Data Matrix Code(2D-Code)

PLC d




automation

1 x Light red, diffuse 6GF9004-8BA

1 x Light Cable 6GF9002-8CE

1 x Intermediate Ring 6GF9001-1BU

Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CROSSED

Recommended accessory: 6GK1950-0BB00Trainer Package:





Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM ( MS, SUN ) STEP 7 V5.4 + SP 5 is required


Trainer Package:FASTCONNECT Accessories Kit

► Additional




STEP 7 V5.4 SP 5 is required

Order number: 6GF9010-1AB00-0AA0


SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)ContentContent




1x Light red, diffuse6GF9004-8BA

1x Sensor Head C/CS-Mount6GF2002-8CB

PLC d




automation




Recommended accessory: 6XV1870-3RH60 Recommended accessory:

1x Lens 15mm6GF9001-1BG01

1x SIMATIC VS120Evaluation device 6GF1018-2AA10

► Additional




ySIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M

y6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit


SIMATIC RFID – RF200

2 SIMATIC RF200 READER RF240R; RS422-INTERFACE (3964R); WITH INTEGRATED ANTENNA 6GT2821-4AC10

1 RFID COMMUNICATION MODULE RF180C FOR PN; 2 READERS CONNECTABLE; WITHOUT CONNECTING BLOCK FOR PROFINET

6GT2002-0JD00

1 RFID PROFINET- / ETHERNET- CONNECTING BLOCK PUSH-PULL RJ45 FOR RF180C, RF182C 6GT2002-2JD00 ► Quick start intoautomation



1 POWER PLUG PRO, 5-POLE PUSH PULL POWER PLUG FOR ON-SITE MOUNTING (PACKAGING UNIT: 1 PLUG) 6GK1907-0AB10-6AA0

1 IE FC RJ45 PLUG PRO; IP65; FAST CONNECT; IE; RJ45 PUSH PULL PLUG FOR ON-SITE MOUNTING TO IE FC TP CABLE 2X2; (PACKAGING UNIT 1 PLUG)

6GK1901-1BB20-6AA0

2 SIMATIC RF, MV CONNECT. CABLE, PREASSEMBLED, BETWEEN ASM 456, RF160C, RF170C, RF18XC AND READER OR EXTENSION CABLE FOR ASM 456, RF160C, RF170C, RF18XC WITH RF, MV, MOBY PUR, CMG, LENGTH 2 M

6GT2891-4FH20

1 RFID SYSTEMS SOFTWARE & DOCUMENTATION ON DVD, FB/FC FOR SIMATIC, RFID PC LIBRARIES, RFID TOOLS 6GT2080-2AA20 PLC d




automation

& , , , 6GT2080 2AA20

5 MOBY D / RF300 ISO / RF200 TRANSPONDER MDS D400 ISO-CARD, 2000 BYTE (NETTO) 6GT2600-4AD00

5 MOBY D / RF300 ISO MOBILE DATA STORAGE MDS D460, ACCORDING TO ISO 15693; 2000 BYTE FRAM; 6GT2600-4AB00

5 MOBY D / RF300 ISO SPACER FOR MDS D160 / MDS D460; DIAMETER 20 MM; HEIGHT 15 MM 6GT2690-0AG00

5 RF200 / RF300 ISO TRANSPONDER MDS D423; TRANSPONDER IN AND ON METAL ACCORDING;2000 BYTE FRAM 6GT2600-4AA00► Sensor

Technologies






; ; 6GT2600 4AA00

► Additional





Order number: 6GT2096-3AA00-0AA0


SIMATIC RFID – RF200ContentContent




2 x RF200 READER RF240R

1 x COMMUNICATION MODULE RF180C

1 x PROFINET/ETHERNET CONNECTING BLOCK

1 x POWER PLUG PRO 1 x PUSH PULL PLUG

PLC d




automation

2 x Terminal Cable5 x TRANSPONDER 5 x MOBILER 5 x SPACER 5 x TRANSPONDER► Sensor

Technologies



1 RFID S f d

MDS D400 ISO-CARD DATA STORAGE

► Additional




1x RFID- Software and documentation

SIMATIC RFID – RF300

1 RFID COMMUNICATION MODULE RF180C FOR PROFINET; 2 READERS CONNECTABLE 6GT2002-0JD00

1 RFID PROFINET-/ETHERNET- CONNECTING BLOCK 6GT2002-2JD00

2 RF300/600 CONN. CABLE PREASSEMBLED, LENGTH: 2 M 6GT2891-4FH20 ► Quick start intoautomation



1 RFID SYSTEMS SOFTWARE PACKAGE AND DOCUMENTATION ON CD 6GT2080-2AA20

1 RF300 READER RF340R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-2AB10

1 POWER PLUG PRO, 5-POLE PUSH PULL 6GK1907-0AB10-6AA0

1 RF300 READER RF310R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-1AB10PLC d




automation

5 TRANSPONDER RF340T 8 KBYTE FRAM 6GT2800-4BB00

10 TRANSPONDER RF360T EPOXY-CARD, 8 KBYTE FRAM 6GT2800-4AC00

20 MOBY D / RF300 ISO MOBILE DATA MEMORY MDS D124 , 112 BYTE EEPROM 6GT2600-0AC10► Sensor

Technologies






► Additional





Order number: 6GT2096-1AA00-0AA0


SIMATIC RFID – RF300ContentContent




SIMATIC RF180C

SIMATIC RF180C

1x PROFINET CommunicationModule RF180C with RJ45

1x Software and documentation

1x Power Supply Cable for RF180C

PLC d




automation

Tank monitoring by RFID Nameplates, documentation of process data

Module RF180C with RJ45 Connector Terminal Block in IP67

2x Terminal Cable between Reader RF340R and Connect Module RF180C




1x SIMATIC RF340RReader 75x75x41

20x MDS D124Mobile data memory

10x SIMATIC RF360TTransponder

5x SIMATIC RF340TTransponder

1x SIMATIC RF310RReader 55x75x30

► Additional




Reader 75x75x41 Mobile data memory112 Byte EEPROM

Transponder 8kByte Memory

Transponder 8kByte Memory

Reader 55x75x30


SIMATIC SIWAREX Weighing Systems

1 x SIWAREX FTA- Project engineering package FTA- Connecting cable (RS232C)- Documentation on CD ► Quick start into

automation



1 x SIWAREX U- Project engineering package U- Connecting cable (RS232C)- Documentation on CD

1 x Load cell series BB, nominal load 10kg1 x base plate with overload protection

SIWAREX U SIWAREX FTAWägezelle Baureihe BB

PLC d




automation

1 x base plate with overload protection1 x Elastomer bearing1 x License agreement




System requirements: None



► Additional





Order number: 7MH4901-0AA10


Drive Technologies

• SINAMICS G120 Standard drive 400V with and without Filter

• Overview

• SINAMICS S120 Servo drive

• SIMOTION D410 add on for S120

230V 400V




SINAMICS G120 standard drive 3 AC 400V-Network Overview

Recomendation




G120-Trainer Package 3AC 400V – 0.55kW PROFINET

CIRCUIT-BREAKER

Recomendation

PLC d




automationSoftware in Package STARTER

PC-CONVERTER CONNECTION KIT




Power Module PM240 – 0.55kWwith /without EMV-Filter A

Asynchronous motori.e.. 1Le!rate output: 0,75kW, 4-Pole, rotational speed 1370 rpm

Control Unit PROFINET CU240E-2 PN-F with OPERATOR PANEL (IOP)

► Additional


S7-300Controller

Power line



Not part of the package



SINAMICS G120 standard drive 3 AC 400V-Network

Alternativ: without Filter

Alterntiv: with Filter1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITH BUILT IN CL. A FILTER WITH BUILT IN

BRAKING CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR FIRMWARE-VERSION V4.6

6SL3210-1PE12-3AL1TP 6SL3200-3AX00-0AL0




1 SINAMICS G120 CONTROL UNIT CU240E-2 PN-F E-TYPE SAFETY INTEGRATED STO, SS1, SLS, PROFINET 6DI, 3DO, 2AI, 2AO, MAX 3F-DI PTC/KTY INTERFACE USB- AND SD/MMC-INTERFACE PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE

6SL3244-0BB13-1FA0

Alternativ: without Filter1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITHOUT FILTER WITH BUILT IN BRAKING

CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR FIRMWARE-VERSION V4.6

6SL3210-1PE12-3UL1 TP SL3200-3AX00-0UL0

PLC d




automation

PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE1 SINAMICS G120 INTELLIGENT OPERATOR PANEL (IOP) 6SL3255-0AA00-4JA01 SINAMICS G120 SHIELD CONNECTION KIT 3 INCL. SCREENING PLATE AND FIXING ELEMENTS 6SL3264-1EA00-0HB01 SINAMICS G120 PC-INVERTER CONNECTION KIT-2 3M USB-CABLE FOR CONTROL UNITS CU230P-2,

CU240B-2, CU240E-2 + SINAMICS G120C6SL3255-0AA00-2CA0

SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download► Sensor

Technologies





Technical note: Consider subsequent slideCore product for vocational W ld C I d i l C l

► Additional




Technical note: Consider subsequent slide

Order number: 6SL3200-3AX00-0AL0 6SL3200-3AX00-0UL0




SINAMICS G120 standard drive 3 AC 400V-Networkoptional Hardware

Recomendation

SIMOTICS GP LOW-VOLTAGE MOTORLOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE,SELF-VENTIL.,IP55 TEMP. CL. 155(F) ACC.TO 130(B)ALUMINIUM HOUSING PREMIUM EFFICIENCY IE2, 2POLE * FS80M * 0,75KW (50HZ)3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTIONWITH 1 PTC THERMISTORS FOR SHUTDOWN TERMINAL BOX AT TOP

1LE1003-0DA22-2AB4

Recomendation




WITH 1 PTC THERMISTORS FOR SHUTDOWN TERMINAL BOX AT TOP

SINAMICS LINE REACTOR380-480V 3AC 47-63HZ I_LN = 4,0A STANDALONE

6SL3203-0CE13-2AA0

MEMORY CARD SINAMICS 3,3V FLASH, 4MBYTE 6ES7954-8LC01-0AA0

CIRCUIT BREAKER SZ S00 3RV2011 1EA10 PLC d




automation

CIRCUIT-BREAKER SZ S00 3RV2011-1EA10CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 2.8...4A, N-RELEASE 52A, SCREW CONNECTION, STANDARD SW. CAPACITY

ETHERNET CABLE 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2 PREASSEMBLED WITH 2 RJ45 CONNECTORS LENGTH 6 M




CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 MTIA PORTAL

► Additional




When selecting please ask the local Siemens technical sales department


SINAMICS G120 standard drive 3 AC 400V-Networkoptional Software

Recomendation

STARTER 6SL3072-0AA00-0AG0STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.3

STARTDRIVE 6SL3072-4AD02-1XG0 SOFTWARE ON DVD STARTDRIVE ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13

Recomendation




SOFTWARE ON DVD: STARTDRIVE ENGINEERING- AND COMMISSIONG TOOL FOR SINAMICS VERSION V13

SIZER 6SL3070-0AA00-0AG0SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL

DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0PLC d




automation

ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CDWITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE

DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7




DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.DOCUMENTATION

TIA PORTAL

SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download

► Additional







SINAMICS G120 – Information

Recommended catalog

SINAMICS G120: Siemens D31Asynchronous motors: Siemens D81.1 ► Quick start into

automation



Asynchronous motors: Siemens D81.1

Useful information for download

SINAMICS G120C (Catalogs and reference books ) PLC d




automation

SINAMICS G120C (Catalogs and reference books…)www.siemens.com/sinamics-g120C

Energy conservation with SINAMICS G120 www.siemens.com/energysaving ► Sensor

Technologies



TIA PORTAL

SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download

► Additional





SINAMICS S120 servo drive 1 AC 230V-NetworkOverview

S120-Package 1AC 230V – 0,37kW PROFINET

CIRCUIT-BREAKER

Asynchronous motor Accessory 1

Overview




Power Module

Network supply1 AC 230V 50Hz commutation choke

Software in Package DCC SINAMICSSIZERCAD CREATORStarter

S t

yi.e. LA7070-4 with rated output: 0,25 kW , 4-pole, rotational speed 1350 rpm 50Hz with/without speed actual value encoder with Sensor-Module SMC30

Accessory 1

PLC d




automation

Control UnitPROFINETCU310 PNCompact Flash Card

Power Module PM340 - 0.37kWwith integrated filter

Basic Operator PanelS7-300 Power lineServo motor

Servo motor i.e. 1FK7022 with moment of a torque 0.85 NM, rotational speed 6000 rpm incremental encoder with DRIVE-CliQ

Accessory 2

Accessory 3




Basic Operator PanelController Sensor-Cable-Drive-CLIQ

Terminal Module TM31Add on Board for SINAMICS CONVERTORS with digital and analog Input and Outputs

External Power Supply24V-Power supply forCU310 andS120 Power module

Servo motor i.e. 1FK7022 with moment of a torque 0.85 NM, rotational speed 6000 rpm absolute encoder with DRIVE-CliQ

Accessory 3

► Additional





Additional Safety Module TM 54 F4 failsafe digital outputs 10 failsafe digital inputs


SINAMICS S120 servo drive 1 AC 230V-Network

Drive System1 CONTROL UNIT CU310-2 PN 6SL3040-1LA01-0AA01 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION, CURRENT SOFTWARE

VERSION V4.066SL3054-0EGD0-0AA0




1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA01 BASIC OPERATOR PANEL BOP20 6SL3055-0AA00-4BA01 SINAMICS S120 POWER MODULE PM340; INPUT: 1AC 200-240V, 50/60HZ, OUTPUT: 3AC 2,3A (0,37KW) 6SL3210-1SB12-3AA0

1 AC COMMUNICATION CHOKE 200V-240V 1AC 3,4A 6SE6400-3CC00-4AB31 SINAMICS SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0

PLC d




automation

Software1 STARTER COMMISSIONING TOOL FOR SINAMICS 6SL3072-0AA00-0AG01 DCC SINAMICS 6AU1810-1HA22-1XA01 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0







► Additional





Order number: 6SL3080-8AB00-0AA0


SINAMICS S120 servo drive 1 AC 230V Network 1) Asynchrous motor with/without position value measuring

Recommended Motors

LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA7Rated output: 0 25 kW rotational speed 1350 rpm 50Hz

1LA7070-4AB10-Z Z = A23 + H57

Position- or Moment control with relative distance measurement impulse generator at the Motor (with positioning at the reference point)

Recommended Motors




Rated output: 0,25 kW , rotational speed 1350 rpm 50Hz Size 71M with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per rev

Z = A23 + H57

SIGNAL CABLE: Between Sensor-Module SMC30 and CU310PN, DRIVE-CLIQ cable IP20/IP20 length: 0,95 m

6SL3060-4AA10-0AA0

PLC d




automation

Sensor Module SMC30:For incremental encoder: HTL, for other encoder

6SL3055-0AA00-5CA2

SIGNAL CABLE:Between Sensor-Module SMC30 and speed actual value encoder, Motion Connect 700, Signal A/B/R, length 2 m

6SX7002-0AN00-1AC0► Sensor

Technologies



Speed control - without actual speed encoder at the motor

LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA9rated output: 0,25 kW , rotational speed 1350 rpm 50Hz, size 71M with foot-mounting B3 degree of protection IP55,Add-on Z = A23 motor protection with KTY 84-130

1LA9070-4AB10-Z Z = A23

► Additional






SINAMICS S120 servo drive 1 AC 230V Network 2a) Relative distance measurement with positioning at the reference point

Recommended Motors

SERVOMOTOR 1FK7022 0,85 Nm, 6000 RPMNATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT WITH DRIVE-CLIQ INTERFACE, SMOOTH SHAFT, TOLERANCE N

1FK7022-5AK21-1DG0

POWER CABLE 6FX5002-5CG01-1AC0

Recommended Motors




PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m6FX5002 5CG01 1AC0

SIGNAL CABLEPREASSEMBLED; DRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m

6FX5002-2DC10-1AC0

PLC d




automation

SERVOMOTOR 1FK7032 1,1 Nm, 3000 RPMNATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT WITH DRIVE-CLIQ INTERFACE; SMOOTH SHAFT, TOLERANCE N

1FK7032-5AF21-1DG0




POWER CABLEPREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m

6FX5002-5CG01-1AC0

SIGNAL CABLEDRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m

6FX5002-2DC10-1AC0► Additional






SINAMICS S120 servo drive 1 AC 230V Network 2b) Relative distance measurement with positioning at the reference point

Recommended Motors

SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPMNATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR. DEGREE OF PROTECTION IP64; PAINT FINISH RAL7016

1FK7011-5AK21-1JG3

Recommended Motors




POWER CABLEPREASSEMBLED 4X1,5+(2X1,5) C; CONNECTOR SIZE 0.5 (1FK7 AH20 TO POWER MODULES AND AC/AC DRIVES) UL/CSA DESINA, MOTION-CONNECT 500 DMAX=10,8 MM, LENGTH (M) =2

6FX5002-5DA30-1AC5

SINAMICS S120 SENSOR MODULE SMC20 6SL3055-0AA00-5BA2 PLC d




automation

SINAMICS S120 SENSOR MODULE SMC20INCREMENTAL ENCODER: SIN/COS 1VPP ABSOLUTE ENCODER: ENDAT WITHOUT DRIVE-CLIQ CABLE 30 MM WIDTH

6SL3055 0AA00 5BA2

SIGNAL CABLE PREASSAMBLED (ABSOLUTE ENCODER IN THE MOTOR AH20) 3X2X0,14+4X0,14+2X0,5+4X0,22C WITH

6FX5002-2EQ20-1AC0 ► Sensor Technologies



( ) , , , ,M17 CONNECTOR UL/CSA DESINA MOTION CONNECT 500 DMAX = 9,9MM LENGTH (M)=2

SINAMICS DRIVE-CLIQ CABLE IP20 LENGTH (M)= 0,95 6SL3060-4AA10-0AA0► Additional






SINAMICS S120 servo drive 1 AC 230V Network 3a) Absolute distance measurement with singular initial positioning

at the reference pointRecommended Motors

SYNCHRONOUS SERVOMOTOR, 1FK7022, 0.85 NM, 6000 RPM,NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR.

1FK7022-5AK21-1DG0

POWER CABLE 6FX5002-5CG01-1AC0

Recommended Motors




PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2

6FX5002 5CG01 1AC0

SIGNAL CABLE PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 2

6FX5002-2DC10-1AC0

PLC d




automation

SYNCHRONOUS SERVOMOTOR, 1FK7022, 1.1 NM, 3000 RPM,NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR

1FK7032-5AF21-1DG0




POWER CABLEPREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2

6FX5002-5CG01-1AC0

SIGNAL CABLEPREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 2

6FX5002-2DC10-1AC0

► Additional




LENGTH (M) = 2



SINAMICS S120 servo drive 1 AC 230V Network 3b) With absolute distance measurement with singular initial positioning

at the reference pointRecommended Motors

SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPMNatural cooling, model IM B5 absolute value transmitter EnDat 16 S/Rvia Sensor module SMC20; smooth shaft, Tolerance N

1FK7011-5AK21-1JG3

Recommended Motors




POWER CABLECustomized 4X1.5+ C, size connector 0.5 MOTION-CONNECT 500; length 2 m

6FX5002-5DA30-1AC0

SENSOR MODULEC SMC20 6SL3055-0AA00-5BA2PLC d




automation

For absolute value transmitter EnDat 16 S/R

SIGNAL CABLE 1Between Sensor-Module SMC20 and absolute value transmitter EnDat 16 S/RMOTION CONNECT 500 with length 2 m

6FX5002-2EQ20-1AC0




SIGNAL CABLE 2Between Sensor-Module SMC20 and CU310PNSINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M

6SL3060-4AA10-0AA0► Additional






SINAMICS S120 servo drive 1 AC 230V Network optional Hardware

Recomendation

CIRCUIT-BREAKER: 230/400V 6KA, 1POLE, C, 10A, T=70mm

5SY6110-7

POWER SUPPLY:SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT: DC 24V / 5A

6EP1333-3BA00

Recomendation




POWER SUPPLY: LOGO!-POWER 24V ; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A

6EP1332-1SH52

CABLE:SIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; length = 6m

6XV1870-3RH60

DOCUMENTATION: SINAMICS S120 on CD ROM 6SL3097 2CA00 0YG5 PLC d




automation

DOCUMENTATION: SINAMICS S120 on CD-ROM 6SL3097-2CA00-0YG5TERMINAL MODULE TM31 EXTENSION:FOR SINAMICS CONVERTORS S120 12 DI, 2 DA, 2 AE, 2 AA

6SL3055-0AA00-3AA1

TERMINAL MODULE TM54F SAFETY I/O EXTENSION :FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS

6SL3055-0AA00-3BA0► Sensor

Technologies



SIGNAL CABLE: SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M

6SL3060-4AA10-0AA0

► Additional






SINAMICS S120 servo drive 1 AC 230V Network Software optional

Recomendation



Recomendation




SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL

DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CDWITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE

PLC d




automation

DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.DOCUMENTATION ► Sensor

Technologies



► Additional





SINAMICS S120 servo drive 3 AC 400V Network Overview

S120-package 3AC 400V – 1.5kW PROFINET

CIRCUIT-BREAKER SIZE

Asynchronous motor Accessory A

Overview




Network supply3 AC 400V 50Hz with power switch, EMV-Filter, commutation choke

Software in Package DCC SINAMICSSIZERCAD CREATOR Starter

S t

yi.e. 1LA7096-4power 1,5 kW, 4-pole, 1420 rpm, with / without speed actual value encoder via Sensor-Module SMC30

Accessory A

PLC d




automation

Control UnitPROFINETCU310 PNCompact Flash Card

Power Module PM340 – 1,5 kW

Basic Operator PanelS7-300 Power line

Servo motor

Servo motor i.e. 1FK7042with torque 3,0 Nm3000 U/minincremental encoder with DRIVE-CliQ,

Accessory B

Accessory C




PanelController Sensor-Cable-Drive-CLIQ

Terminal Module TM31ADD ON BOARD FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS

External Power Supply24V-Power supply forCU310 andS120 Power module

Servo motor i.e. 1FK7042with torque 3,0 Nm3000 U/minabsolute encoderwith DRIVE-CliQ,

Accessory C

► Additional





Additional Safety Module TM 54 F4 failsafe digital outputs 10 failsafe digital inputs


SINAMICS S120 servo drive 3 AC 400V-Network

Drive system1 CONTROL UNIT CU310 PN 6SL3040-1LA01-0AA01 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION,

ACTUAL FIRMWARE RELEASE V4.066SL3054-0EG00-1BA0

1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA0► Quick start into

automation



1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA01 BASIC OPERATOR PANEL (BOP20) 6SL3055-0AA00-4BA01 CONVERTER POWER MODULE PM340 WITHOUT NETFILTER 1,5 kW; 4,1A 6SL3210-1SE14-1UA01 EMC FILTER 380V-480V 3AC 6A FOOTPRINT FSA - CLASS A 6SE6400-2FA00-6AD01 AC COMMUNICATION CHOKE 200V-480V 3AC 4,8A BASE LAYER FASA -3,2 MH 6SE6400-3CC00-6AD31 SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0S ft PLC d




automation

Software1 STARTER COMMISSIONING TOOL 6SL3072-0AA00-0AG01 DCC SINAMICS 6AU1810-1HA22-1XA01 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0




Systemvoraussetzung: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3

Sales note: For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research institutions and non-commercial training departments!


► Additional





Order number: 6SL3080-8AE00-0AA0


SINAMICS S120 Servo drive 3 AC 400V Network A) Asynchronous-Motor with/without position measuring of actual position

Recomendation

Standard low voltage induction motor Type 1LA7Rated output: 1,5 kW, rotational speed 1420 rpm 50Hz

1LA7096-4AA60-Z Z = A23+H75

Position- or Moment control with relative distance measurement impulse generator at the Motor (with positioning at the reference point)

Recomendation




p p pSize: 90L with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per reverse

SIGNAL CABLE :Between Sensor-Module SMC30 and CU310PN, SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M

6SL3060-4AA10-0AA0

Sensor Module SMC30: 6SL3055 0AA00 5CA2 PLC d




automation

Sensor Module SMC30:For incremental encoder: HTL, for other encoder

6SL3055-0AA00-5CA2

SIGNAL CABLE :Between Sensor-Module SMC30 and rotation speed encoder, Motion Connect 700, Signal A/B/R with length 2 m

6SX7002-0AN00-1AC0




Standard low voltage induction motor Type 1LA9Rated output: 1,5 kW , rotational speed 1420 rpm 50Hz Size: 71M with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130

1LA9096-4AA60-ZZ = A23

Speed control – without actual speed encoder at the motor

► Additional






SINAMICS S120 Servo drive 3 AC 400V Network B) With relative distance measurement (positioning at the reference point)

Recomendation

SIMOTICS S-1FK7

SYNCHRONOUS MOTOR 1FK7-CT PN=0,82 KW; UZK=600V

M0=3NM (100K); NN=3000RPM; NATURAL AIR COOLING,

1FK7042-2AF71-1QG0

Recomendation




FRAME SIZE IMB 5 (IM V1, IM V3) FLANGE 1 POWER CONNECTOR ROTATABLE

ABSOLUTE ENCODER SINGLETURN 20 BIT WITH DRIVE-CLIQ

INTERFACE (ENCODER AS20DQI) PLAIN SHAFT, TOLERANCE N;

W/O HOLDING BRAKE PROTECTION CLASS IP64;;

PLC d




automation

POWER CABLE

CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M

6FX5002-5CG01-1AC0► Sensor

Technologies



SIGNAL CABLE

CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M6FX5002-2DC10-1AC0

► Additional






SINAMICS S120 Servo drive 3 AC 400V Network C) With absolute distance measurement (without positioning at the reference point)

Recomendation

SIMOTICS S-1FK7

SYNCHRONOUS MOTOR 1FK7-CT

PN=0,82 KW; UZK=600V M0=3NM (100K); NN=3000RPM;

1FK7042-2AF71-1FG0

Recomendation




NATURAL AIR COOLING, FRAME SIZE IMB 5 (IM V1, IM V3);

FLANGE; 1 POWER CONNECTOR ROTATABLE;

ABSOLUTE ENCODER 22 BIT + 12 BIT MULTITURN, WITH

DRIVE-CLIQ INTERFACE (ENCODER AM22DQ)

PLC d




automation

PLAIN SHAFT, TOLERANCE N; W/O HOLDING BRAKE

PROTECTION CLASS IP64

POWER CABLE

CUSTOMIZED 4X1 5 C SIZE CONNECTOR 1 MOTION CONNECT 500; LENGTH 2 M

6FX5002-5CG01-1AC0 ► Sensor Technologies



CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M

SIGNAL CABLE

CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M6FX5002-2DC10-1AC0 ► Additional






SINAMICS S120 Servo drive 3 AC 400V Network Hardware optional

Recomendation

CIRCUIT-BREAKER S00CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 5.5...8A

3RV2011-1HA10

POWER SUPPLY SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT : DC 24V / 5A

6EP1333-3BA00

Recomendation




POWER SUPPLY LOGO!-POWER 24V; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A

6EP1332-1SH52

CABLESIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; LENGTH = 6m

6XV1870-3RH60

DOCUMENTATION 6SL3097 2CA00 0YG5 PLC d




automation

DOCUMENTATION SINAMICS S120 ON CD

6SL3097-2CA00-0YG5

TERMINAL MODULE TM31 I/O-EXTENSIONFOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS; 12 DI, 2 DA, 2 AE, 2 AA

6SL3055-0AA00-3AA1

TERMINAL MODULE TM54F Safety I/O-EXTENSION : FOR SINAMICS CONVERTORS WITH FAIL SAFE IN AND OUTPUTS

6SL3055-0AA00-3BA0► Sensor

Technologies



FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS

SIGNAL CABLESINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M

6SL3060-4AA10-0AA0► Additional






SINAMICS S120 Servo drive 3 AC 400V Network Software optional

Recomendation



Recomendation




SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL

DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CD WITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE

PLC d




automation

DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR. DOCUMENTATION




► Additional





SIMOTION D410-2 add on for SINAMICS S120 1- and 3- phase

SIMOTION D410-2 is a single-axis system, which can be used in combination with SINAMICS S120 AC/AC Power Module.

SIMOTION D410-2 is the entry level controller in the SIMOTION D family. ► Quick start into automation



SIMOTION D410 is the ideal controller, if Motion Control for a single-axis and PLC functionality is demanded in a small form factor.

PROFINET IO with IRT (with D410-2 PN/DP) enables various connectivity with HMI and distributed I/Os.

PLC d




automation




► Additional




SIMOTION D410 add on for SINAMICS S120

1 SIMOTION DRIVE BASED CONTROL UNIT D410-2 DP/PN SINGLE-AXIS CONTROLLER WITH PROFINET VARIANT

6AU1410-2AD00-0AA0

1 SIMOTION DRIVE-BASED 1 GB COMPACT FLASH CARD D410-2; SINAMICS DRIVE SOFTWARE V4.X AND SIMOTION KERNEL FOR SIMOTION D410-2

6AU1400-1PA22-0AA0► Quick start into

automation



1 SIMOTION ENGINEERING SYSTEM SCOUT STANDALONE V4.3 FULL LICENSE DVD INCL. STARTER, RUNTIME, TECHN., DRIVES BASIC, DOCUMENTATION FREE OF CHARGE UTILITIES

6AU1810-1CA43-1XA0

1 SIMOTION ENGINEERING SYSTEM DCC SIMOTION V2.2 SP1 FULL LICENSE DCC FOR SIMOTION V4.1 SP1 AND FOR SINAMICS V2.5 OPTION FOR SCOUT V4.3 AND FOR STARTER V4.1 DELIVERY ON DATA CARRIER DVD INCL. FLOATING LICENSE

6AU1810-1JA22-1XA0

PLC d




automation

1 SIMOTION IT COMPREHENSIVE IT FUNCTIONS WITH JAVA VIRTUAL MACHINE: RUNTIME ENVIRONMENT FOR JAVA APPLICATIONS ON SIMOTION LICENSE (COL) INCLUDES FOLLOWING LICENCES:

SIMOTION IT DIAG: 6AU1820-8BA20-0AB0 SIMOTION IT OPC XML-DA: 6AU1820-8BB20-0AB0

6AU1820-8BD20-0AB0




System requirements: 64 BIT: Windows 7 Professional, Ultimate SP132 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3

Sales note:

Technical note:

For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research institutions and non-commercial training departments!

Consider subsequent slide

► Additional




q

Order number: 6SL3080-8LA00-0AA0


SIMOTION D410 add on for SINAMICS S120optional Software and Hardware

Recomendation

SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60SIMOTION ENGINEERING SYSTEM SCOUT STAND ALONE SOFTWARE CARE SERVICE 6AU1810-0CA00-0XL0SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE CLIQ CABLE ADD ON BOARD

Recomendation




SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS 6SL3055-0AA00-3AA1

SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M 6SL3060-4AA10-0AA0

PLC d




automation




► Additional






Additional

• Overview• Industrial Controls

T i P k P h i R k• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations




AdditionalAbstract of the comprehensive accessories Industrial Controls



► Energy EfficiencyContactors and Contactor Assemblieshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8210239?tree=catalogtree

PLC d




automationCommanding and Signaling Deviceshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8229999?tree=catalogtree

Terminal Blockshttp://w3.siemens.com/powerdistribution/global/EN/lv/product-portfolio/alpha/terminal-blocks/Pages/terminal-blocks.aspx




https://eb.automation.siemens.com/mall/en/de/Catalog/Products/10046635?tree=CatalogTree

Protection Equipmenthttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10007268?tree=catalogtree

► Additional


Safety Systemshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10121593?tree=catalogtree

SENTRON P t ti S it hi M i d M it i D i



SENTRON Protection, Switching, Measuring and Monitoring Deviceshttps://eb.automation.siemens.com/mall/en/de/Catalog/Products/10005570?tree=CatalogTree

AdditionalPurchasing Remarks of SCE Trainer Packages

For the purchasing of SCE Trainer Packages, a special supplementary license agreement is required.The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for software products. For trainer packages, the “Supplementary License Agreement for SIMATIC Software for Class-Room use at research-, development- and education institutions„ has to be signed and send for release of the delivery to ► Quick start into

automation



use at research , development and education institutions„ has to be signed and send for release of the delivery to I IA AS S EUR&AFR SCE. You will find these at: http://intranet.siemens.com/sce

Release for deliveryTrainer packages are released trough Siemens AG department I IA AS S EUR&AFR SCEContact Partner: Christian Callegari Fax: +49 (0)911-895-133992 und christian callegari@siemens com PLC d




automation

Contact Partner: Christian Callegari Fax: +49 (0)911-895-133992 und [email protected]

ExceptionThe following Trainer packages are not intended for vocational in-house training Departments.SIMATIC S7-1516 PN/DP 6ES7516-3AN00-4AB3 SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Package) 6ES7822 1BA03 4YA5




SIMATIC STEP 7 Trainer Package V12 SP1 (12 Package) 6ES7822-1BA03-4YA5Upgrade SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Upgrade Package) 6ES7822-1AA03-4YE5SIMATIC S7 Software for students 6ES7822-1AC03-4YA5Student License ► Additional





AdditionalGeneral Regulations for SCE Trainer Packages

General Regulations• Prices, if listed, valid as of release 05/2014. The prices are in Euros ex works excluding packaging.• The sales tax (VAT) is not included in the prices. This is calculated separately according to the legal regulations

for each valid set► Quick start into

automation



for each valid set.• We reserve the right to change the price and will charge the price valid at shipping.• You will always find current prices upon request from your Siemens point of contact.• The listed products could be subject to European/German and/or US-Export regulations.• The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for PLC d




automation

The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for software products.

• The information provided in this SCE Guide Trainer Packages only contains general descriptions which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. ► Sensor

Technologies



Additional Information• Benefits of SCE www.siemens.com/sce• More Information about the Trainer Packages www.siemens.com/sce/tp• Training curriculums: www.siemens.com/sce/modules

► Additional




• Complete didactic solutions from Partners: www.siemens.com/sce/partner



Thank you for your attention!

Roberto Guidi

Industry Sector IA AS SCE

E-Mail: [email protected]



siemens.it/sce

Date post:	11-Sep-2021
Category:	Documents
Upload:	others
View:	15 times
Download:	0 times

SCE Guide Trainer Packages SCE Guide Trainer Packages

Documents