Date post: | 24-Dec-2015 |
Category: |
Documents |
Upload: | dennis-clark |
View: | 217 times |
Download: | 3 times |
Scene ShopScene Shop This area has space and equipment to convert the designer’s
plan into the complete scenery with the least effort, by the least number of people, in the least amount of time, with
the least waste of materials. Two factors that influence the organization and set up of a
scene shop Size - of the stage, shop, and theatre company Flow - how materials are received and stored, measured,
marked, cut, constructed, and loaded out of the shop and into the theater/stage.
Best Scene Shop Scenarios: 2Xs the floor space for the largest piece of scenery Each step should have its own storage and specific tools The larger the shop, the more specialized areas are involved
This area has space and equipment to convert the designer’s plan into the complete scenery with the least effort, by the least number of people, in the least amount of time, with
the least waste of materials. Two factors that influence the organization and set up of a
scene shop Size - of the stage, shop, and theatre company Flow - how materials are received and stored, measured,
marked, cut, constructed, and loaded out of the shop and into the theater/stage.
Best Scene Shop Scenarios: 2Xs the floor space for the largest piece of scenery Each step should have its own storage and specific tools The larger the shop, the more specialized areas are involved
Scene ShopScene Shop
Last Safety reminders: Use the proper tool for the proper job Understand your limitation Be smart and stay focused on your task Be aware of your environment Avoid creating hazards:
Nails, screws sticking up Not cleaning up properly (leaving tools out) Blocking the fire exits Overloading power
Last Safety reminders: Use the proper tool for the proper job Understand your limitation Be smart and stay focused on your task Be aware of your environment Avoid creating hazards:
Nails, screws sticking up Not cleaning up properly (leaving tools out) Blocking the fire exits Overloading power
HardwareHardware Hardware:
Hinges - used for things that have to open/close or pivot or fold - doors, windows
Latches - Used to keep moving pieces in an open/closed position (doors, windows)
Casters - Used to roll materials (platforms) can be swival or stationary
Hardware: Hinges - used for things that have to open/close
or pivot or fold - doors, windows
Latches - Used to keep moving pieces in an open/closed position (doors, windows)
Casters - Used to roll materials (platforms) can be swival or stationary
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
FastenersFasteners Fasteners
Nails- Used when objects need to be attached for long duration
Screws - Used where stress on joint may pull out nail
Nuts - Used on platforms; can take a great deal of weight
Bolts - Used on platforms; can take a great deal of weight
Fasteners Nails- Used when objects need to be attached for long duration
Screws - Used where stress on joint may pull out nail
Nuts - Used on platforms; can take a great deal of weight
Bolts - Used on platforms; can take a great deal of weight
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
Marking and Measuring ToolsMarking and Measuring Tools Marking and Measuring Tools
Tape Measurer - can be ‘locked’ into position
Folding Ruler - can be unfolded to what you need to measure
Chalk Line - used to help mark straight lines (usually for cutting)
Combination Square - used to measure 45 and 90 degree lines
Framing Square - used to measure 90 degree lines
Marking and Measuring Tools
Tape Measurer - can be ‘locked’ into position
Folding Ruler - can be unfolded to what you need to measure
Chalk Line - used to help mark straight lines (usually for cutting)
Combination Square - used to measure 45 and 90 degree lines
Framing Square - used to measure 90 degree lines
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
Marking and Measuring Tools Marking and Measuring Tools Speed Square - used to mark straight lines on lumber (90
degree)
T-Square - used to mark cross cuts (best for 90 degree)
Bevel Gauge - adjustable for angles
Spirit Level - used horizontal or vertical to see if something is level
Speed Square - used to mark straight lines on lumber (90 degree)
T-Square - used to mark cross cuts (best for 90 degree)
Bevel Gauge - adjustable for angles
Spirit Level - used horizontal or vertical to see if something is level
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
Cutting ToolsCutting Tools Crosscut Saw - Cuts across the grain
Rip Saw - Cuts with the grain - sometime called a table saw
Keyhole Saw - Used to cut in small areas, curved shapes
Hacksaw - Used to cut metal
Saber/Jig Saw - Used to cut wood with curves; push through
Crosscut Saw - Cuts across the grain
Rip Saw - Cuts with the grain - sometime called a table saw
Keyhole Saw - Used to cut in small areas, curved shapes
Hacksaw - Used to cut metal
Saber/Jig Saw - Used to cut wood with curves; push through
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
Cutting ToolsCutting Tools Miter box and saw - Used to cut angles
End Nips - Used to cut small tight things/take staples out
Tin Shears - Used to cut thin pieces of metal
Matt Knife - Used to cut cardboard type item; not wood
Circular Saw - Used for cross or rip cuts
Miter box and saw - Used to cut angles
End Nips - Used to cut small tight things/take staples out
Tin Shears - Used to cut thin pieces of metal
Matt Knife - Used to cut cardboard type item; not wood
Circular Saw - Used for cross or rip cuts
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
Plaining and Pairing ToolsPlaining and Pairing Tools Wood Chisel- Used to chisel wood
Rat Tail Chisel- Used to file in small places
Wood File - Used for wood finishing (looks like XXXX on surface)
Metal File - Used for metal filing (looks like = = = = on surface) Rasp - First file used - removes large amounts of wood Router - Used for shaping and carving
Smoothing Plane-Designed to work on surface or edge of grain
Sand Paper - Sheets of paper with different grains; smoothing course surfaces
Wood Chisel- Used to chisel wood
Rat Tail Chisel- Used to file in small places
Wood File - Used for wood finishing (looks like XXXX on surface)
Metal File - Used for metal filing (looks like = = = = on surface) Rasp - First file used - removes large amounts of wood Router - Used for shaping and carving
Smoothing Plane-Designed to work on surface or edge of grain
Sand Paper - Sheets of paper with different grains; smoothing course surfaces
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
Boring ToolsBoring ToolsPower Drill - Used to drill holes or push screws through wood (or smaller holes). The amount of torque (or the amount of force needed to rotate or spin things into the wood) used should be high for metal and low for wood.
Power Drill - Used to drill holes or push screws through wood (or smaller holes). The amount of torque (or the amount of force needed to rotate or spin things into the wood) used should be high for metal and low for wood.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
Driving ToolsDriving ToolsClaw Hammer - Used to pound in and pull out
nailsBall Peen Hammer - Used to flatten out metal
without leaving marksTack Hammer - Used to hammer in tacks (duh)
Staple Gun - Handheld; used to drive in stapesPneumatic Staple Gun - Uses air pressure to
drive in staples
Claw Hammer - Used to pound in and pull out nails
Ball Peen Hammer - Used to flatten out metal without leaving marks
Tack Hammer - Used to hammer in tacks (duh)
Staple Gun - Handheld; used to drive in stapesPneumatic Staple Gun - Uses air pressure to
drive in staples
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
Driving ToolsDriving Tools Jaw Wrench - Tightens or loosen nuts/bolts
Flat-Headed Screwdriver - Used to drive in screws with a - slot on the screw head
Phillips Screwdriver - Used to drive in screws with a X slot on the screw head
Socket Wrench - Tightens and loosens nuts from bolts
Jaw Wrench - Tightens or loosen nuts/bolts
Flat-Headed Screwdriver - Used to drive in screws with a - slot on the screw head
Phillips Screwdriver - Used to drive in screws with a X slot on the screw head
Socket Wrench - Tightens and loosens nuts from bolts
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
QuickTime™ and aTIFF (Uncompressed) decompressorare needed to see this picture.