Assessment Manager: PL Page 1 of 24
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
4732
Accredited to ISO/IEC 17025:2017
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Bureau Veritas
Consumer Products Services (Shenzhen)
4th Floor, Block B
Minlida Industrial Building
4th Zone of Honghualing Industrial Park
Xili Town
Nanshan District
Shenzhen
Guangdong
People’s Republic of China
Contact: Judy Zhu
Tel: +86 00 755 86000151
E-Mail: [email protected]
Website: www.cps.bureauveritas.com
Testing performed by the Organisation at the locations specified below
Locations covered by the organisation and their relevant activities
Laboratory locations:
Location details Activity Location code
Address 1st , 4 & 5th Floor, B Building Minlida Industrial Building 4th Zone of Honghualing Industrial Park Xili Town Nanshan District Shenzhen Guangdong People’s Republic of China
Local Contact Judy Zhu Tel: 0755 -86000151 (Ext 6254)
Testing Textiles/Leather - Chemical Textiles/Leather - Physical Furniture - Furnishing - Flammability Furniture - Strength & Stability Children’s products - Physical Toys - Physical/Mechanical Writing & Marking Instruments Toys - Electrical Safety Personal Protective Equipment
C
Address 1st to 3rd Floor, A Building Minlida Industrial Building 4th Zone of Honghualing Industrial Park Xili Town Nanshan District Shenzhen Guangdong People’s Republic of China
Local Contact Judy Zhu Tel: 0755 -86000151 (Ext 6254)
Testing Toys - Physical/Mechanical Toys - Flammability Toys - Electrical Safety Toys - Chemical Writing & Marking Instruments Textiles/Leather - Chemical Children’s products - Chemical Skin Contact - Chemical Microbiological
D
Address No 96 Guantai Road (Houjie Section) Houjie Town Dongguan City Guangdong Province People’s Republic of China
Local Contact Edwin Ye Tel:+86 769 85935656 (Ext 8066)
Testing Toys - Physical/Mechanical Toys - Flammability Toys - Chemical Children’s products – Chemical Plastic Coatings - Chemical
E
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 2 of 24
DETAIL OF ACCREDITATION
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING
Physical and Mechanical Tests BS EN 71-1:2014 +A1:2018 EN 71-1:2014 +A1:2018
C, D & E
4 – General Requirements 4.1 - Material cleanliness 4.2 - Assembly 4.3 - Flexible plastic sheeting 4.4 – Toy Bags 4.5 - Glass 4.6 – Expanding Materials 4.7 - Edges 4.8 – Point & Metallic wires 4.9 – Protruding Parts 4.10 – Parts moving against each other 4.11 - Mouth-actuated toys and other toys intended to be put in the mouth 4.12 – Balloons 4.13 – Cords of toy kites and other flying toys 4.14 – Enclosures 4.15 – Toys intended to bear the mass of a child, 4.15.1 – Toys propelled by a child or by other means, 4.15.2 – Toy bicycles, 4.15.3 – Rocking horses and similar toys, 4.15.4 – Toys not propelled by a child 4.15.5 – Toys scooters 4.16 - Heavy immobile toys 4.17 - Projectile toys 4.18 - Aquatic toys and inflatable toys (exclude >1.2m toys) 4.19 - Percussion caps specifically designed for use in toys and toys using percussion caps 4.20 – Acoustics Excluding 8.28.2.4 - Toys with earphones and headphones 4.21 – Toys containing a non-electrical heat source 4.22 - Small balls 4.23 - Magnets 4.24 - Yo-yo balls 4.25 - Toys attached to food 4.26 - Toy disguise costumes 4.27 - Flying toys
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 3 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING (cont’d)
Physical and Mechanical Tests (cont’d)
BS EN 71-1:2014 +A1:2018 EN 71-1:2014 +A1:2018
C, D & E
5 - Toys intended for children under 36 months 5.1 - General requirements 5.2 - Soft-filled toys and soft-filled parts of a toy 5.3 - Plastic sheeting 5.4 - Cords, chains and electrical cables in toys 5.5 – Liquid-filled toys 5.6 – Speed limitation of electrically-driven ride-on toys 5.7 - Glass and porcelain 5.8 - Shape and size of certain toys 5.9 - Toys comprising monofilament fibres 5.10 - Small balls 5.11 - Play figures 5.12 - Hemispheric-shaped toys 5.13 - Suction cups 5.14 - Straps intended to be worn fully or partially around the neck 5.15 - Sledges with cords for pulling 6 - Packaging 7 - Warnings, markings and instructions for use
TOYS and TOY PACKAGING
Physical and Mechanical Tests BS EN 71-1:2014 +A1:2018 EN 71-1:2014 +A1:2018
C, D & E
excluding
5.4(a) cords approaching 1.5 mm in thickness,
E
4.20 Acoustics requirement for toys using headphones or earphones, pull-along or push toys
E
Standard Consumer Safety
Specification for Toy Safety
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 4 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING (cont’d)
Physical and Mechanical Tests (cont’d)
Standard Consumer Safety Specification for Toy Safety (cont’d)
D & E
ASTM F963-16
ASTM F963-17
Standard Consumer Safety
Specification for Toy Safety
4.1Material Quality(except for the material test according to the 4.3.1)
D & E Except where stated
4.3.7 , Stuffing materials 4.4 Electrical/Thermal Energy D only 4.5 Sound-Producing Toys 4.6 Small Objects 4.7 Accessible Edges 4.8 Projections 4.9 Accessible Points 4.10 Wires or Rods 4.11 Nails and Fasteners 4.12 Plastic Film 4.13 Folding Mechanisms and
Hinges
4.14 Cords, straps, and elastics 4.15 Stability and Overload
Requirements
4.16 Confined Spaces
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 5 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING (cont’d)
Physical and Mechanical Tests (cont’d)
Standard Consumer Safety Specification for Toy Safety (cont’d)
4.17 Wheels, Tires, and Axles 4.18 Holes, Clearances, and
Accessibility of Mechanisms
4.19 Simulated Protective Devices 4.20.2 Pacifiers - Mechanical test 4.21 Projectile Toys 4.22 Teethers and Teething Toys 4.23 Rattles
4.24 Squeeze Toys 4.25 Battery-Operated Toys
E Only
4.25 Battery-Operated Toys (except 4.25.10 and 4.25.11)
D Only
4.26 Toys intended to be Attached to a Crib or Playpen
4.27 Stuffed and Beanbag-Type Toys
4.28 Stroller and Carriage Toys 4.29 Art Materials (except 4.29.1) 4.30 Toy Gun Marking 4.31 Balloons 4.32 Certain Toys with Nearly
Spherical Ends
4.33 Marbles 4.34 Balls 4.35 Pompoms 4.36 Hemispheric-Shaped Objects 4.37 Yo Yo Elastic Tether Toys D Only 4.38 Magnets 4.39 Jaw Entrapment in Handles
and Steering Wheels
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 6 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING (cont’d)
Physical and Mechanical Tests (cont’d)
Standard Consumer Safety Specification for Toy Safety (cont’d)
4.40 Expanding Materials 4.41 Toy Chests D Only 5 Safety Labeling Requirements 6 Instructional Literature 7 Producer’s Markings 8 Test Methods 8.1 General 8.2 Testing for Hazardous
Substance Content
8.3 Test Methods for determination of heavy element content in toys, toy components and materials
8.4 Test for Cleanliness and Preservative Effectiveness
8.5 Normal Use Testing 8.6 Abuse Testing 8.7 Impact Tests 8.8 Torque Tests for Removal of
Components
8.9 Tension Test for Removal of Components
8.10 Compression Test 8.11 Tests for Tire Removal and
Snap-in Wheel and Axle Assembly Removal
8.12 Flexure Test 8.13 Test for Mouth-Actuated Toys
and Mouth-Actualted projectile D Only
8.14 Projectiles 8.15 Test for Stability of Ride-On
Toys or toy seats D Only
8.16 Pompoms 8.17 Stalled Motor Test for
Battery-Operated Toys D Only
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 7 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING (cont’d)
Physical and Mechanical Tests (cont’d)
Standard Consumer Safety Specification for Toy Safety (cont’d)
8.18 Test s for Battery-powered
ride-on toys D Only
8.19 Test for toys that contain
secondary cells or batteries D Only
8.20 Tests for Toys Which
Produce Noise
8.21 Dynamic Strength Test for Wheeled Ride-on Toys
D Only
8.22 Toys Film Thickness 8.23 Test for Loops and Cords
8.24 Yo Yo Elastic Tether Toy Test Methods
D Only
8.25 Magnet Test Methods
8.26 Test Methods for Locking Mechanisms or Other Means
8.27 Tests for toy chest lids and closures
D Only
8.28 Test for Overload of Ride-On Toys and Toy Seats
D Only
8.29 Stuffing materials evaluation 8.30 Expanding materials
ACTIVITY TOYS Physical/Mechanical Tests EN 71-8:2018 D
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 8 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY PACKAGING
Flammability Tests BS EN 71-2:2011 +A1:2014 EN 71-2:2011 +A1: 2014 Excluding the following: Flammable gases Flammable gels
D & E
Flammability - Vinyl Plastic Film
ASTM F963-16&17
Accredited only for:4.2 and Annex A5
and Annex A6
US 16 CFR 1500.44-2011 Method for determining extremely flammable and flammable solids US 16 CFR 1610-2011 Stand for the flammability of clothing textiles (exclude samples required to be dry cleaned) 16 CFR 1611:2010
D & E
D & E
D & E
D
TOYS and TOY MATERIALS
Chemical Tests
Migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium
BS 5565-3:1995 + A1:2001 ISO 8124-3:2010+A2:2018 (withdrawn) ISO 8124-3:2020
D & E
Phthalate Esters TSOP-020 based on ISO 8124-
6:2018
Amended REACH regulation (EC) No 1907/2006 Annex XVII Item 51 according to EU 2018/2005.
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 9 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS and TOY MATERIALS (cont’d)
Chemical Tests (cont’d) ASTM F963-16 Section 8.3 ASTM F963-17 Section 8.3 Total Elements Screening Method & Soluble Elements Method
D & E
To meet requirements of following:
ASTM F963-16 Section 4.3.5.1 (2) ASTM F963-16 Section 4.3.5.2 (1) (a,b,c,d & e) ASTM F963-16 Section 4.3.5.2 (2) (a, b & c) ASTM F963-17 Section 4.3.5.1 (2) ASTM F963-17 Section 4.3.5.2 (1) (a,b,c,d & e) ASTM F963-17 Section 4.3.5.2 (2) (a, b & c) Using ICP OES & ICP MS spectrophotometry
D & E
Category I, Category II & Category III
Migration of certain elements BS EN 71-3:2013+A3:2018 Except Cr III (withdrawn) EN 71-3:2019
D & E
D & E Toys and school supplies for preschool
Migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium
NOM-252-SSA1-2011 Using ICP-OES and ICP-MS
D & E
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 10 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS LIQUIDS, TEXTILES, POLYMERIC and OTHER MATERIALS
Polynuclear (polycyclic) aromatic hydrocarbons (PAHS)
SOP: CPSD-AN-000090-MTHD To Implement REACH regulations (EC) No 1907/2006 Annex XVII Item 50 and amendment 1272/2013 ZEK 01.4-08 of GS Mark certification; § 30 & 31 of the LFGB; Product Safety Commission (AfPs) - GS specification Using; GC (MS)
D
SOP: CPSD-AN-000090-MTHD
To Implement REACH regulations (EC) No 1907/2006 Annex XVII Item 50 and amendment 1272/2013 AfPS GS 2014:01 PAK of GS Mark certification; AfPS GS 2019:01 PAK of GS Mark certification; § 30 & 31 of the LFGB; ; Using; GC (MS)
E
MONOMERS in TOY MATERIALS
Migration of Bisphenol A
BS EN 71-10:2005 and BS EN 71-11:2005 to implement EU Toys Directive 2009/48/EC Appendix C of Annex II using LC-MS
D
D
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 11 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS, METAL CHILDREN’S JEWELRY, CHILDREN PRODUCTS AND MATERIALS
Total lead content CPSC-CH-E1001-08.3:2012 CPSC-CH-E1002-08.3 2012 CPSC-CH-E1003-09 & 09.1
To meet requirement of following: 16CFR1303 ASTM F963-16 Section 4.3.5.1(1) ASTM F963-16 Section 4.3.5.2(2)(a) And
ASTM F963-17 Section 4.3.5.1(1) ASTM F963-17 Section 4.3.5.2(2)(a)
Using ICP OES spectrophotometry Excluding XRF spectrophotometry
D & E
TOYS AND, METAL CHILDREN’S JEWELRY, CHILDREN PRODUCTS
Soluble Cadmium CPSC-CH-E1004-11
To meet requirement of following: ASTM F963-16 Section 4.3.5.2(2)(c) And ASTM F963-17 Section 4.3.5.2(2)(c)
Using ICP OES spectrophotometry
D & E
PLASTIC COATINGS Phthalate Content IHM TP (SZ) 003 & LOI-T-09.12 to
meet the requirements of CPSC-CH-C1001-09.3 and CPSC-CH-C1001-09.4
D & E
REACH regulation (EC)
No 1907/2006 Annex XVII Items 51 and 52
D & E
EN 14372:2004. Clause 6.3.2 Using solvent extraction and
GC(MS)
Total Cadmium Content in Plastic, Coating, Wet Paint and Other Similar Surface Coating Materials
CPSD-AN-00004-MTHD based on EN 1122 Method B to implement REACH regulation (EC) No 1907/2006 Annex XVII Item 23 Using wet digestion and ICP-AES
D & E
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 12 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS Age Warning Labelling Graphical symbols for age warning
labelling BS EN 71-6:1995 EN 71-6:1994 BS 5665-6:1995
D
WRITING & MARKING INSTRUMENTS
Specification for Caps to reduce the risk of asphyxiation
BS 7272-1:2008 D
Specification for End Closures
to reduce the risk of asphyxiation
BS 7272-2:2008 +A1:2014 D
TOYS Electrical Safety Tests ASTM F963-17 4.25.11 Toys that
Contain Secondary Cells or Secondary Batteries
D
Electrical toys supplied at SELV not exceeding 24V and 3A
BS EN 62115:2005 + A12:2015 Excluding the following Clauses: 16 &19.2.1, and Annex C EN 62115:2005 +A12:2015 Excluding the following Clauses 16 & 19.2.1and Annex C
D
ABNT NBR NM 300-6:2004 Exc. 16 & 19.2.1
D
TOYS Exemptions from classification as a
banned toy or other banned article for use by childrens (Dive stick and similar articles)
16 CFR 1500.86 (a) 7 & 8 C
OUTDOOR FURNITURE- SEATING and TABLES for CAMPING, DOMESTIC and CONTRACT USE
General Safety Requirements Mechanical safety requirements and test methods for seating Mechanical Safety requirements and Test Methods for Tables
BS EN 581-1:2017 EN 581-1:2017 EN 581-2:2015 +AC July 2018 BS EN 581-2:2015 +AC July 2018 BS EN 581-3:2017 EN 581-3:2017 BS EN 581:Part 3:1999 (withdrawn)
C
C
C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 13 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
DOMESTIC FURNITURE - SEATING
Determination of stability BS EN 1022:2018 EN 1022:2018
C
Test method for the determination of strength and durability
BS EN 1728:2012 +AC July 2013 EN 1728:2012 +AC July 2013
C
Mechanical and structural
safety requirements EN 12520:2015 BS EN 12520:2015
C
NON DOMESTIC FURNITURE SEATING
Strength, durability and safety requirments
BS EN 16139:2013 inc Corr July 2013 EN 16139:2013
C
DOMESTIC FURNITURE - TABLES
Test method for the determination of strength, durability and stability
BS EN 1730:2012 BS EN1730:2000 + AMDs 13509 and 13563 (withdrawn) EN 1730:2000 (withdrawn)
C
NON DOMESTIC FURNITURE - STORAGE FURNITURE
Strength and stability of furniture. Methods for determination of stability of non-domestic storage furniture.
BS 4875-8:1998 + AMD 16896 C
Furniture - Non-domestic tables
Furniture - Strength, durability and safety - Requirements for non-domestic tables
BS EN 15372: 2016 EN 15372:2016
C
Furniture - Non-domestic seating
Furniture - Strength, durability and safety - Requirements for non-domestic seating
BS EN 15373: 2007 (withdrawn) EN 15373:2007 (withdrawn)
C
Office furniture - Work tables and desks
Office furniture - Work tables and desks Part 1: Dimensions
BS EN 527-1:2011 EN 527-1:2011
C
Office furniture - Work tables and desks Part 2: Mechanical safety requirements
BS EN 527-2:2016 +A1:2019 EN 527-2:2016 +A1:2019
C
Office furniture - Work tables and desks Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure
BS EN 527-3:2003 EN 527-3:2003 (withdrawn)
C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 14 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
DOMESTIC KITCHEN and BATHROOM STORAGE UNITS
Safety requirements and test methods
EN 14749:2016 BS EN 14749:2016
C
DOMESTIC and NON-DOMESTIC STORAGE
Test methods for the determination of strength, durability and stability
I.S.EN16122:2012 EN 16122:2012
C
FURNITURE-STRENGTH, DURABILITY and SAFETY
Requirements for domestic tables BS EN12521:2015 EN12521:2015
C
DOMESTIC FURNITURE BEDS & MATRESSES
Safety requirements and test methods
BS EN 1725:1998 EN 1725:1998
C
BUNK BEDS and HIGH BEDS for DOMESTIC USE
Safety, strength and durability requirements
EN 747-1 :2012 +A1:2015 BS EN 747-1:2012 +A1:2015
C
Test methods EN 747-2:2012+A1:2015 BS EN 747-2:2012+A1:2015
C
COOKWARE - Domestic cookware for use on top of a stove, cooker or hob
General Requirements BS EN 12983-1:2000 EN 12983-1:2000 For Clauses 6.1 (excluding 6.1.6), 6.2, 7.3, 7.5, 7.6 and 10
C
Materials and articles in contact with food stuffs – ceramic, glass, glass-ceramic or plastic cookware
Materials and articles in contact with food stuffs – Test Method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
BS EN 15284:2007 C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 15 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
CHILDRENS Mechanical & Physical
PRODUCTS Clothing, Cord and Drawstrings EN 14682:2014 C & E Soothers EN 1400 :2013 +A2:2018 C & E Soother Holders EN 12586:2007+ A1:2011 C Drinking Equipment EN 14350-1:2020 C & E Cutlery & Feeding Utensils EN 14372:2004 C & E Cots & Folding cots EN 716-1:2017+AC 2019 C Cribs and Cradles EN 1130:2019 C Playpens EN 12227:2010 C Changing Units:
Safety Requirements Test Methods
EN 12221-1:2008+A1:2013 EN 12221-2:2008+A1:2013
C
Carry Cots & Stands EN 1466:2014+AC:2015 C High Chairs EN 14988:2017 +A1:2020 C Reclined Cradle EN 12790:2009 C Table Mounted Chairs
Chair Mounted Seats
EN 1272:2017 BS EN 16120:2012+A2:2016
C
C Baby Walking frames EN 1273:2005 C Baby Bouncers EN 14036:2003 C Safety Barriers EN 1930: 2011 C Child care articles. Wheeled child
conveyances BS EN 1888:2003+A1+A2+A3:2005 (withdrawn) BS EN 1888-1:2018 EN 1888-1:2018 BS EN 1888-2:2018 EN 1888-2:2018
C
Prams and strollers-Safety requirements
AS/NZS 2088:2013 C
Cots for household use—Safety
requirements AS/NZS 2172:2013 C
Folding cots-Safety requirement AS/NZS 2195:
2010+A1:2013+A2:2015 C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 16 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
CHILDRENS FURNITURE
General Safety Requirement FIRA FRQG C001:2016 Except EN 717
C
Seating - Requirements for
strength, stability and durability FIRA FRQG C002:2016 +A1 2017 C
Table and Desk - Requirement for
strength, stability and durability FIRA FRQG C003:2016 +A1:2017 C
Storage furniture - Requirement for
Strength, stability and durability FIRA FRQG C004:2016 +A1:2017 C
BUNK BEDS Entrapment Hazard Tests S.I 1987 No 1337- The Bunk Beds
(Entrapment Hazards) Safety regulations
C
Requirements 16 CFR 1513 C TEXTILES Formaldehyde BS EN ISO 14184-1:2011
ISO 14184-1:2011 Using UV-VIS spectrophotometry
D
Banned Azo Dyes including PAAB BS EN ISO 14362-1:2017
BS EN ISO 14362-3:2017 using liquid-liquid screening and solid phase column; GC(MS) & HPLC
D
To meet requirements of REACH EU 1907/2006 ANNEX VXII Item 43 and Amd section 11 of Annex to EU 126/2013
Using GC-MS and HPLC-DAD
LEATHER Formaldehyde BS EN ISO 17226-1:2019 ISO
17226-1:2018 using HPLC BS EN ISO 17226-2:2019 ISO 17226-2:2018 using UV-VIS spectrophotometry
D
D
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 17 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
LEATHER, TEXTILES, SYNTHETIC FIBRE
Azo Dyes including 4-AAB in textile and leather
BS EN ISO 14362-1:2017 BS EN ISO 14362-3:2017 § 64 LFGB B82.02.9:2006 To implement REACH EC1907/2006 Annex XVII Item No 43 ISO 17234-1:2015 Using GC(MS) and HPLC-DAD
D
PAAB ISO 17234-2:2011
BS EN ISO 14362-3:2017 Using GC(MS) and HPLC-DAD
D
Formaldehyde content BS EN ISO 17226-1:2019
ISO 17226-1:2018 using HPLC BS EN ISO 17226-2:2019 ISO 17226-2:2018 using UV-VIS spectrophotometry
D
COATED ITEMS Nickel Release BS EN 1811:2011 +A1:2015 EN 1811:2011 +A1:2015 EN 12472:2005 + A1:2009 to implement REACH regulations (EC) No 1907/2006 Annex XVII Item 27 Using ICP-OES
D
UPHOLSTERED FURNITURE (NON DOMESTIC SEATING)
Flammability Tests - Resistance to Ignition
BS 7176: 2007 + A1 2011 (Low Hazard to High Hazard) Excluding; Dry Cleaning Fabrics
C
BS EN 1021-1: 2014
BS EN 1021-2: 2014 BS 5852: 2006 (Section 4: sources 5 & 7)
C
BS EN 1021-1:2006 BS EN 1021-2:2006
C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 18 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
MATTRESS, DIVANS AND BED BASES
Flammability Tests - Resistance to Ignition
BS 7177: 2008 + A1 2011 (Low Hazard to High Hazard) BS 7177: 2008 + A1 2011 (Low Hazard to High Hazard) BS EN 597-1:2015 BS EN 597-2:2015 EN 597-1:2015 EN 597-2:2015 BS 6807:2006 (Section 2: sources5 & 7)
C
BS EN 597-1:1995 BS EN 597-2:1995
C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 19 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
UPHOLSTERED COMPOSITES FOR SEATING INCLUDING; POLYURETHANE FOAM IN SLAB OR CUSHION POLYURETHANE FOAM IN CRUMB FORM LATEX RUBBER FOAM NON-FOAM FILLING MATERIALS SINGLY COMPOSITE FILLINGS FOR FURNITURE OTHER THAN MATTRESS, BED-BASE, CUSHION AND PILLOWS COMPOSITE FILLINGS FOR PILLOWS AND CUSHIONS WITH PRIMARY COVERS
Flammability Tests - Ignitability by smoldering and flaming ignition source
The Furniture and Furnishings (Fire) (Safety) Regulations 1988 (Statutory Instrument 1988 No 1324) with Amendments in 1989 (Statutory Instrument 1989 No 2358) and 1993 (Statutory Instrument 1993 No. 207) and 2010 (Statutory Instrument 2010 No 2205) Schedule 1 Part I using test method BS 5852: Part 2:1982 (Ignition Source 5) Schedule 1 Part II using test method BS 5852: Part 2:1982 (Ignition Source 2) Schedule 1 Part III using test method BS 5852: Part 2:1982 (Ignition Source 2) Schedule 2 Part I using test method BS 5852:Part 2:1982 (Ignition Source 2) Schedule 2 Part II using test method BS 5852:Part 2:1982 (Ignition Source 2) Schedule 2 Part III using test method BS 5852: Part 2:1982 (Ignition Source 2) Schedule 2 Part IV using test method BS 5852:Part 2:1982 (Ignition Source 2) BS 6807:1986 Section 4 Schedule 3 using test method BS 5852:Part 2:1982 (Ignition Source 5)
C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 20 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
UPHOLSTERED COMPOSITES FOR SEATING INCLUDING; POLYURETHANE FOAM IN SLAB OR CUSHION (cont’d) COMPOSITE FILLINGS OF MATTRESSES AND BED-BASES INTERLINER VISIBLE PART OF UPHOLSTERY NON-VISIBLE PART OF UPHOLSTERY VISIBLE COVER STRETCH COVER NON-VISIBLE COVER
Flammability Tests - Ignitability by smoldering and flaming ignition source (cont’d)
The Furniture and Furnishings (Fire) (Safety) Regulations 1988 (Statutory Instrument 1988 No 1324) with Amendments in 1989 (Statutory Instrument 1989 No 2358) and 1993 (Statutory Instrument 1993 No 207) and 2010 (Statutory Instrument 2010 No 2205) (cont’d) Schedule 4 Part I using test method BS 5852:Part 1:1979 (Cigarette test) Schedule 4 Part II using test method BS 5852 Part 1 1979 (Cigarette test) Schedule 5 Part I using test method BS 5852:Part 1:1979 (Ignition Source 1) Schedule 5 Part II using test method BS 5852:Part 1:1979 (Ignition Source 1)
C
Schedule 5 Part III using test
method BS 5852:Part 1:1979 (Ignition Source 1)
Schedule 5 Part II using test
method BS 5852:Part 1:1979 (Ignition Source 1)
Schedule 5 Part III using test
method BS 5852:Part 1:1979 (Ignition Source 1)
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 21 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
DOMESTIC ARTICLES
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
BS EN 12875-1:2005 C
PERSONAL PROTECTIVE EQUIPMENT– BICYCLE HELMETS
Peripheral Vision Positional Stability Retention System Strength Impact test
16 CFR 1203:2018 C
FOOD AND FOOD PRODUCTS
Microbiological Tests Documented In-House Methods: D
Enumeration: Frozen, Chilled, Pre-Cooked Food Products and Confectionary
Aerobic Colony Count CPSD-AN-00035 based on U.S. Food and Drug Administration - Bacteriological Analytical Manual online, 8th Edition, chapter 3
D
TOY COSMETICS, LIQUIDS, PASTES, PUTTIES, GELS AND POWDERS Water Filled Toys
Enumeration: Aerobic Colony Count
Method CPSD-AN-00035 based on U.S. Food and Drug Administration - Bacteriological Analytical Manual online, 8th edition, chapter 3
D
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 22 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOY COSMETICS, LIQUIDS, PASTES, PUTTIES, GELS AND POWDERS
Total Plate Count Method CPSD-AN-00035 TPC Pour Plate Technique based on APHA 23rd Edition 2017 Section 9215B
D
Enumeration of Total Coliforms Method CPSD-AN-00342,
Membrane Filtration technique, based on APHA 23rd Edition 2017 Section 9222B
(as appropriate for the product
category as detailed in relevant pharmacopoeial monographs)
Specifications and methods detailedin the British Pharmacopoeia (BP),the European Pharmacopoeia (EP),and the US Pharmacopoeia (USP),supplemented by in house documented Procedures
Microbiological Examination of Non
Sterile Product Method CPSD_AN-00375 USP, based on United States Pharmacopoeia Edition 41, 2018 NF 36 chapter <61>,<62>
Antimicrobial Effectiveness Testing Method CPSD_AN-00376 based
on United States Pharmacopoeia Edition 41 2018 NF 36 chapter <51>. To meet requirement of following: ASTM F963-17 Section 4.3.6.1- 4 and 8.4.1- 2
D
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 23 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
TOYS AND COSMETICS
Microbiological Examination of Non Sterile Product
Method CPSD_AN-00375 BP/EP, based on British Pharmacopoeia Appendix XVI B, 2018 & European Pharmacopoeia 9th Edition 2018 chapters 2.6.12 and 2.6.13
D
Water Filled Toys, Liquids and Toy Cosmetics
Efficacy of Antimicrobial Preservation
Method CPSD-AN-00293, based on British Pharmacopoeia Appendix XVI C, 2018 and European Pharmacopoeia 9th edition 2018, chapter 5.1.3
D
To meet requirements of following: EC type approval protocol No.2
Microbiological safety of toys containing aqueous media
SCCP’s Notes of Guidance for the
testing of cosmetic Ingredients and Their Safety Evaluation 9th Revision for compliance European Cosmetic Directive 76/768/EC
PROTECTIVE HELMETS
Physical Tests BS EN 13087-1:2000 BS EN 13087-2:2012 BS EN 13087-3:2000 BS EN 13087-4:2012 BS EN 13087-5:2012 BS EN 13087-6:2012 Excluding Flat blade Striker method
C
PERSONAL PROTECTIVE EQUIPMENT – HELMETS for SKIERS & SNOWBOARDERS
Physical Tests BS EN 1077:2007 C
PERSONAL PROTECTIVE EQUIPMENT – HELMETS for SKATEBOARDS & ROLLER SKATES
Physical Tests BS EN 1078:2012 C
4732
Accredited to ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Bureau Veritas Shenzhen Co., Ltd
Issue No: 028 Issue date: 19 November 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: PL Page 24 of 24
Materials/Products
tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
Location
Code
PERSONAL EYE EQUIPMENT
Sunglasses and sunglare filters for general use
BS EN ISO 12312-1:2013 +A1:2015 excluding clauses: 5.3.4.1 Photochromic filters 5.3.4.2 Polarizing filters 5.3.5.3 Antireflective coated sunglasses 5.3.5.4 Enhanced infrared absorption 6 Refractive power 7.5 Resistance to perspiration 8 Resistance to solar radiation 10 Resistance to abrasion 11 Protective requirements BS EN ISO 12311:2013 excluding clauses: 7.5 Calculation of solar IR transmittance 7.6 Measurement of absolute spectral reflectance 7.7 Absolute luminous reflectance 8 Test method for measuring optical properties 9.8 Test method for resistance to solar radiation 9.10 Test for resistance to perspiration of the sunglass Frame
D
Protective gloves against mechanical risks
Physical & Mechanical Testing
BS EN 388 2016+A1 2018 C
Protective gloves- Physical & Mechanical Testing DIN EN 420-2010 /EN 420_2003+A1:2009 (
C
Protective clothing-Hand,arm,chest,abdomen,leg, genital and face protectors for fencers
Marking and Information
EN 13567-2002+A1-2007 For the following clauses: 6 – Marking 7 - Information
C
Protective Gloves
Physical & Mechanical Testing
BS EN ISO 21420:2020 ISO 21420:2020
C
END