SCHEDULE OF · PDF file1 | Page Signature of the bidder Under seal of the firm Brahmaputra...

1 | P a g e Signature of the bidder

Under seal of the firm

Brahmaputra Cracker and Polymer Limited Schedule of Rates

EXECUTION PACKAGE – II FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM)

Rail infrastructure

Job Number: 6907 BIDDING DOCUMENT NO. 6907/125/OT/RITES-EIL/EXECUTION/PKG-II/2011

SCHEDULE OF RATES

NAME OF WORK: EXECUTION PACKAGE – II, FOR RAIL

INFRASTRUCTURE INCLUDING LAYOUT OF

NAPHTHA UNLOADING YARD OF

BRAHMAPUTRA CRACKER AND POLYMER

LIMITED (BCPL) AT LEPETKATA, DIBRUGARH

(ASSAM).

BIDDING DOCUMENT NO. 6907/125/OT/RITES-EIL/EXECUTION/PKG-II/2011



Brahmaputra Cracker and Polymer Limited Schedule of Rates

EXECUTION PACKAGE – II FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM)

Rail infrastructure

Job Number: 6907 BIDDING DOCUMENT NO. 6907/125/OT/RITES-EIL/EXECUTION/PKG-II/2011

TABLE OF CONTENTS

SL. NO.

DESCRIPTION No. of SHEETS

1. SCHEDULE OF RATES-TOP SHEET & TABLE OF CONTENTS 2

2. PREAMBLE TO SCHEDULE OF RATES 1

3. SUMMARY OF PRICE (FORM-SP0) 1

4. SCHEDULE OF RATES (FORM-SP1) 38

5. EXTENDED STAY COMPENSATION (FORM-SP2) 1



Brahmaputra Cracker and Polymer Limited

EXECUTION PACKAGE –II FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD

OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM) Schedule of Rates

Job Number: 6907 Rail infrastructure BIDDING DOCUMENT NO. 6907/125/OT/RITES-EIL/EXECUTION/PKG-II/2011

PREAMBLE TO SCHEDULE OF RATES 1.0 The Schedule of Rates shall be read in conjunction with all other sections of this

Bidding Document. 2.0 The CONTRACTOR is deemed to have studied the drawings, specifications and

details of works to be done within the Time Schedule and should have acquainted himself of the conditions prevailing at site.

3.0 The quantities shown against the various items are only approximate and may vary

to any extent individually subject to conditions given in General Conditions of Contract/Special Conditions of Contract.

4.0 No claim shall be entertained during currency of this Contract towards any items

due to the above including where the CONTRACTOR has quoted low/ high rates. 5.0 EIL/BCPL/RITES reserves the right to interpolate or extrapolate the rates for any

new item of work not covered in Schedule of Rates from the similar items already available in schedule of rates. In case any activity though specifically not covered in schedule of rates descriptions but the same is covered under scope of work/ scope of supply/specification/ drawings etc. no extra claim on this account shall be entertained, since Schedule of Rates is to be read in conjunction with all other documents forming part of the Contract.

6.0 All items of work mentioned in the Schedule of Rates shall be carried out as per the

specifications, drawings and instructions of EIL/BCPL/RITES and the rates are deemed to be inclusive of material, consumable, labour, supervision, tools & tackles and detailing of construction/fabrication drawings, isometric wherever required as called for in the detail specification and conditions of the Contract.

7.0 EIL/BCPL/RITES reserves the right to cancel/ delete/ curtail any item or group of

work if necessary. Such a step shall not be construed as reason for changing the rates.

8.0 Bidders shall quote their prices as percentage variation on total prices. This

percentage variation as quoted by the bidder will apply to all work items during execution.

9.0 Bidder shall indicate only the Increase/Decrease on total estimated value in terms

of percentage upto 2 decimal places in the “Summary of Prices(Form SP-0)” sheet. Bidder shall not change the filled rate/ amount indicated in ‘Schedule of Rates (Form SP-1)’.

10.0 The rate for Extended Stay Compensation shall be filled up by Bidder in Form SP-2.







FORM – SP‘0’ SUMMARY OF PRICE

NAME OF WORK : EXECUTION PACKAGE – II, FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM).


1.0 Total Estimated cost of the work

(In Figures) Rs. 3,07,65,950.84

(In words) Rupees Three Crore Seven Lakh Sixty Five Thousand Nine Hundred Fifty and Paise Eighty Four Only.

2.0 Percentage Increase / Decrease on Total Estimated cost of the work (ie. on 1.0 above), which will be applicable uniformly on all items of Schedule of Rates

(In Figures) _____________ %

(In words) ___________________ percent only (Refer Note-1)

3.0 Total Amount after considering Percentage Increase / Decrease as given above at sl. No. 2.0 (ie. 1.0 + 2.0 or 1.0 – 2.0)

(In Figures) Rs. ____________________

(In words) Rupees _____________________________________________ _____________________________________________ only

Note: 1. Bidder shall indicate the Percentage Increase/Decrease under Sl. No. “2.0” and Total

amount after considering percentage increase/decrease under Sl. No. “3.0” in Price bid only (and not in techno-commercial bid). In case of discrepancy between +/- percentage quoted against Sl. No. "2.0” and total amount quoted against Sl. No. "3.0"; then the percentage quoted against Sl. No. “2.0" will prevail.

2. Bidder shall indicate (+) for increase and (-) for decrease. For no increase/decrease, ‘NIL’ shall be indicated.

3. The percentage should be quoted upto 2 decimal places.







SCHEDULE OF RATES

(FORM - SP 1)





OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM)

Schedule of Rates


SUMMARY OF SCHEDULE OF RATES (SOR)

NAME OF WORK: EXECUTION PACKAGE – II, FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM).


Sl. No.

Description of Schedule. Amount.(Rs.)

1. SCH. ‘A’- Area Development 5301339.05

2 SCH.’B’ – Staff Quarter, Station Building & End Hut etc.

14531554.88

3 SCH. ‘C’ – Road Works 1634937.35

4. SCH. ‘D’ – Bore Well & Tube Well 363023.25

5. SCH.-‘E’ – External & Internal Electrical Works.

SCH.-‘ E1’ - 20 m high Mast Tower 896448.60

SCH.-‘E2’- 100 KVA Out Door Type Sub Station. 5970711.66

SCH.-‘E3’ - Illumination of approach Road. 628697.20

SCH.-‘ E4’ – Electrification of Relay room, battery room, generator room, ASM room, SS room etc.

720920.95

SCH.-‘ E5’ – Electrification of Staff quarter type-II – 10 Nos.

718317.90

TOTAL of SCH. (A+B+C+D+E) = 3,07,65,950.84






Schedule of Rates


Schedule-A, (Area Development). Sl

No

Description of item Unit Qty. Rate Amount (Rs.)

1. Earth work in filling in embankment, guide

bunds, around buried type abutments,

bridge gaps, trolley refuges, rain bunds if

provided, platforms etc. with earth

excavated from outside railway boundary

entirely arranged by the contractor at his

own cost as per RDSO's latest guidelines

and specifications and special condition of

contract including all leads, royalty, lifts,

ascents, descents, crossing of nallahs or

any other obstructions. The rate shall

include all dressing of bank to final profile,

demarcation and setting out of profile, site

clearance, removing of shrubs, roots of

vegetations growth, heavy grass, benching

of existing slope of old bank, all handling/

re-handling, taxes, octroi, and royalty etc.

as a complete job. Cut trees shall be

property of railways and to be deposited

in the railway godown unless specified

otherwise in the Special condition of

contract.

Cum

9430 515.99 4865785.70

2. Extra for mechanical compaction of

earth/blanketing material filled in

embankment with contractor's rollers of

suitable capacity, type and size to

achieve specified density as per

specification, testing as per IS Codes

including cost of water, T & P

consumable material and all labour as

a complete job. The work is to be

executed as per Latest edition of

"Guidelines for Earth Work in Railway

Project" issued by RDSO, Lucknow.

Cum 9430 14.22 134094.60

3. Turfing / planting, including all lead and

lift, and watering as required until

properly rooted, with. Note - Initially

payment of only 40% will be made.

Balance 60% will be paid only after 3

months of maintenance period if the

turfing is properly rooted.

100

sqm.

775 11083.71 85898.75






Schedule of Rates


Sl

No


4. Providing stone pitching hand packed

with surface levelled off to the correct

section with hammer dressing with

directional slope at bank with joints

thoroughly filled with cement mortar 1:3

(1 cement : 3 coarse sand) as per

approved plan/as directed by the

Engineer-In-Charge as may be required

including all labour and materials,

supply, leading, loading, royalty, taxes

and placing in position etc. all

complete with stone boulders of 250

mm to 300 mm thick.

Cum 90 1284.00 115560.00

5. Any other items of work not included in

the above schedule but required to be

executed for successful completion of

work as deemed necessary by the

Engineer and which will be as per N.F.

Rly schedule of Rate,2010. Basic cost -

Rs.100000.00

LS LS Please quote…….

% age At per /

Above / Below.

(Please strike out

whichever not

applicable)

100000.00

Total of Sch. A 5301339.05






Schedule of Rates


Schedule B: (Staff Quarter, Station Building, End Hut etc.)

Sl

No


EARTH WORK :

1 Earth work in excavation as per

approved drawings in foundations for

buildings and bridges to cover dressing

to neat dimension and plumbing sides

etc. and dumping at embankment site

or spoil heap, within railway land,

including 50m lead and 1.5m lift, the

lead to be measured from the centre

of gravity of excavation to centre of

gravity of soil heap: the lift to be

measured from natural ground level

and paid for in layers of 1.5m each, as

per specifications-in.

All kinds of soil.

cum 3346 120.04 401653.84

2 Back Filling, watering and ramming

earth in 15cm layers in floors and

foundations with suitable surplus earth

from foundations including 50m lead

and 1.5m lift.

cum 3141 25.08 78776.28

3 Supplying and filling sand in plinth and

under floors including watering

ramming consolidating and dressing

complete.

cum 750 1315.68 986760.00

CONCRETE WORK :

4 Providing and laying in position cement

concrete of specified proportion

excluding cost of centering and

shuttering - All works upto plinth level :

1:3:6 (1 cement : 3 sand : 6 graded

stone aggregate 20mm nominal size)

cum 172 4698.22 808093.84






Schedule of Rates


Sl

No


5 Providing and laying in position

machine mixed, machine vibrated and

machine batched Design Mix Cement

Concrete M-25 grade (cast-in-situ)

using 20 mm graded crushed stone

aggregate and coarse sand of

approved quality in RCC raft

foundation etc. including finishing,

using admixtures in recommended

proportions (as per IS:9103), if

approved in Mix Design to accelerate,

retard setting of concrete and or

improve workability without impairing

strength and durability complete as per

specifications and direction of

Engineer-In-Charge. Payment for

reinforcement & shuttering shall be

paid extra.

cum 340 6051.34 2057455.60

6 Providing and fixing precast M-15

grade cement concrete in string or

lacing courses, coping, bed plates,

anchor blocks, plain window sills,

shelves, louvers, steps, etc. upto floor

two level, including hoisting and setting

in position with cement mortar 1:3 (1

cement : 3 Coarse sand), cost of

required shuttering, centering

complete- including the cost of

cement. (cast at site)

cum 6 6406.08 38436.48

FORM WORK :

7 Centering & shuttering including

strutting propping etc. and removal of

form for:

a) Foundations, footings, bases of

columns, raft foundation of washable

aprons, pile caps, footings of FOB etc.

sqm 425 177.21 75314.25

b) Suspended floors, roofs, landings,

balconies, FOB slabs, walkway slabs

and access platforms

sqm 1275 272.68 347667.00

c) Lintels, beams, plinth beams, bed

blocks, girders, bressumers and

cantilevers.

sqm 950 233.35 221682.50

d) Columns, pillars, posts and struts

sqm 950 353.10 335445.00






Schedule of Rates


Sl

No


REINFORCEMENT :

8 Supplying reinforcement for RCC work

including straightening, cutting,

bending, placing in position and

binding all complete.

Thermo-Mechanically Treated bars. Kg 25000 61.14 1528500.00

DAMP PROOF COURSE :

9 Providing and laying cement concrete

1:2:4 in damp-proof course (1 cement:

2 sand : 4 graded stone aggregate

12.5 mm nominal size - including

providing, fixing and removal of forms.

25 mm thick sqm 105 719.52 75549.60

BRICK WORK (BELOW PLINTH LEVEL) :

10 Brick work with non-modular(FPS)bricks

of class designation 7.5 in foundation

and plinth in :

Cement mortar 1:6 (1 Cement: 6

coarse sand).

cum 200 3933.78 786756.00

11 Providing and laying each layer of flat

brick soling hand packed and joints

filled with ordinary sand.

With jhama bricks sqm 1000 174.89 174890.00

BRICK WORK (ABOVE PLINTH LEVEL) :

12 Brick work with non-modular (FPS) bricks

of class designation 7.5 in

superstructure beyond plinth level up to

floor two:

Cement mortar 1:6 (1 Cement: 6

Coarse sand).

cum 425 4118.61 1750409.25

13 Half brick masonry with bricks of class

designation 7.5 in superstructure above

plinth level up to floor two level

Cement mortar 1:4 (1 Cement : 4

Coarse sand)

sqm 435 541.79 235678.65

14 Making plinth protection with brick of

class designation 7.5 laid on edge in

cement mortar 1:6 (1 cement: 6 coarse

sand) over 75 mm bed of cement dry

brick aggregate 40 mm nominal size

rammed, consolidated and grouted

with fine sand and the top of bricks

pointed with cement mortar 1: 3 (1

cement : 3 fine sand)

With non - modular bricks sqm 220 674.78 148451.60






Schedule of Rates


Sl

No


WOOD AND PVC WORK & FITTINGS :

15 Providing wood work in frames of doors,

windows, clerestory windows and other

frames and trusses, wrought, framed

and fixed in position :

Sal wood.

cum 7 38115.00 266805.00

16 Providing and fixing panelled/glazed or

panelled and glazed shutters for doors,

windows and clerestory windows

including ISI marked black enamelled

M.S. butt hinges with necessary screws

excluding, panelling/glazing which will

be paid for separately

Kiln seasoned and chemically treated

hollock wood, 30mm thick.

sqm 266 1009.30 268473.80

17 Providing and fixing M.S. sliding door

bolts generally conforming to I.S.:281,

bright satin finish or black stone

enamelled with nuts and screws etc.

complete of size

300 x 16 mm

Each 80 167.62 13409.60

18 Providing and fixing M.S. tower bolts

generally conforming to IS:204 (Part I)

with necessary screws etc. complete of

size

a) 250x10mm

Each 80 60.43 4834.40

b) 200x10mm

Each 96 45.59 4376.64

c) 100x10mm

Each 80 29.14 2331.20

19 Providing and fixing M.S. door handles

with necessary screws etc. complete of

size.

100mm

Each 175 17.73 3102.75






Schedule of Rates


Sl

No


20 Providing and fixing factory made PVC

door frame of size 50x47mm with a wall

thickness of 5mm, made out of

extruded 5mm rigid PVC foam sheet

mitered at corners and joined with

2Nos. of 150mm long brackets of

15x15mm M.S. square tube, the vertical

door profiles to be reinforced with

19x19mm M.S. square tube of 19

gauge, EPDM rubber gasket weather

seal to be provided through out the

frame. The door frame to be fixed to

the wall using M.S. screws of 65/100mm

size complete as per manufacturer’s

specification and direction of Engineer-

in-charge.

Metre 120 500.30 60036.00

21 Providing and fixing to existing door

frames 30mm thick factory made panel

PVC door shutter consisting of frame

made out of M.S. tubes of 19 gauge

thickness and size of 19mmx19mm for

styles and 15x15mm for top and bottom

rails. M.S. frame shall have a coat of

steel primers. M.S. frame covered with

5mm thick heat moulded PVC foam

sheet 'C' channel as per drawing given

in IR Standard specifications complete

in all respect.

sqm 35 3083.61 107926.35

FLOORING :

22 Cement concrete flooring 1:2:4 (1

cement : 2 coarse sand : 4 graded

stone aggregate) finished with a

floating coat of neat cement including

cement slurry, but excluding the cost of

nosing of steps etc.

25mm thick with 12.5mm nominal size

stone aggregate.

sqm 770 227.36 175067.20

STEEL WORK :

23 Structural steel work in single section

including cutting, bending,

straightening, drilling, riveting, bolting,

hoisting, fixing in position, including

applying a priming coat of approved

steel primer, complete - up to 6m

height above G.L.

a) In RSJ, tees, angles and channels. Kg 90 66.98 6028.20

b) In flats, plates, round or square bar. Kg 2800 67.30 188440.00






Schedule of Rates


Sl

No


24 Providing and fixing in position

Collapsible Steel shutters with vertical

channels 20X10X2mm and braced with

flat iron diagonals 20X5mm size with top

and bottom rail of T-iron 40X40X6mm

with 40mm dia, steel pulleys complete

with bolts, nuts, locking arrangement,

stoppers, handles and hold fasts

including applying a priming coat of

approved steel primer.

sqm 15 3448.54 51728.10

25 Providing and fixing 1mm thick M.S.

Sheet door shutter with frame of

40x40x6mm angle iron and 3mm M.S.

Gusset plates at the junctions and

corners, all necessary fittings complete,

including applying a priming coat of

approved steel primer.

Using M.S. Angles 40x40x6mm for

diagonal braces

sqm 9 2507.37 22566.33

FINISHING :

26 12mm cement plaster of mix (inside) :

1:4 (1 cement : 4 coarse sand) sqm 2150 128.26 275759.00

27 Cement plaster to ceiling of mix :

6mm thick 1:3(1 Cement: 3 fine sand). sqm 1100 100.21 110231.00

28 Pointing on brick work with cement

mortar 1:3 (1 cement: 3 fine sand).

Flush/Ruled/Struck or Weathered

pointing.

sqm 1700 73.55 125035.00

29 Cement plaster skirting (upto 30cm

height) with cement mortar 1:3 (1

cement: 3coarse sand) finished with a

floating coat of neat cement:

18mm thick. sqm 280 259.90 72772.00

30 12mm cement plaster finished with a

floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand). sqm 325 160.06 52019.50

31 Colour washing such as green, blue or

buff to give an even shade.

New work (two or more coats) with a

base coat of white washing with lime.

sqm 1700 15.44 26248.00

32 Distempering with oil bound washable

distemper of approved brand and

manufacture to give an even shade.

New work (two or more coats of

distemper) over & including priming

coat with cement primer.

sqm 3250 77.22 250965.00






Schedule of Rates


Sl

No


33 Painting with synthetic enamel paint of

approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over

an under coat of suitable shade with

ordinary paint of approved brand and

manufacture.

sqm 480 80.67 38721.60

34 Painting (two or more coats) on rain

water, soil, waste and vent pipes and

fittings with black anti-corrosive

bitumastic paint approved brand and

manufacture over and including a

priming of ready mixed zinc chromate

yellow primer on new work

100 mm diameter pipes

Metre 50 25.05 1252.50

35 Painting G.I. pipes (New work) and

fittings with two coats of anti-corrosive

bitumastic paint of approved quality

a) 20 mm diameter pipe

Metre 170 4.64 788.80

b) 32 mm diameter pipe

Metre 60 7.08 424.80

c) 40 mm diameter pipe

Metre 250 8.06 2015.00

SANITARY INSTALLATIONS :

36 Providing and fixing white, glazed fire

clay kitchen sink of size

600X450X250mm kitchen sink with C.I.

brackets, C.P. brass chain with rubber

plug, 40mm C.P. brass waste complete,

including painting the fittings and

brackets, cutting and making good the

walls wherever required.

Each 10 3092.89 30928.90

37 Providing and fixing water closet

squatting pan (Indian type W.C pan)

with 100mm sand cast iron P and S

trap, 10 litre low level white P.V.C.

flushing cistern with manually controlled

device (handle lever) conforming to IS :

7231, with all fittings and fixtures

complete including cutting and

making good the walls and floors

wherever required.

White Vitreous China Orissa pattern

W.C. pan of size 580X440-mm with

integral type foot rests.

Each 12 4088.89 49066.68






Schedule of Rates


Sl

No


38 Providing and fixing white vitreous

china flat back or wall corner type

lipped front urinal basin of

430x260x350mm and 340x410x265mm

sizes respectively with automatic

flushing cistern, with standard flush pipe

and C.P. brass spreaders with brass

unions and G.I. clamps complete,

including painting of fittings and

brackets, cutting and making good the

walls and floors wherever required.

One urinal basin with 5ltr. White PVC

automatic flushing cistern.

Each 4 3189.49 12757.96

39 Providing and fixing wash basin with

C.I/M.S. brackets, 15mm C.P. brass pillar

taps, 32mm C.P. brass waste of

standard pattern, including painting of

fittings and brackets, cutting and

making good the walls wherever

required.

White, vitreous china wash basin size

630X450mm with a pair of 15mm C.P.

brass pillar taps.

Each 4 2693.24 10772.96

40 Providing and fixing PVC waste pipe for

sink or wash basin including PVC waste

fittings complete.

Flexible pipe 32mm dia.

Each 16 84.33 1349.28

41 Providing and fixing mirror of 5.5mm

thickness of float glass (of approved

quality) required shape and size with

plastic moulded frame of approved

make and shade with 6mm thick hard

board backing.

Rectangular shape 453x357mm (outer

dimension).

Each 12 1144.94 13739.28

42 Providing and fixing soil, waste and

vent pipes :

100mm dia. Sand cast iron S&S pipe as

per I.S. 1729.

Metre 120 727.29 87274.80

43 Providing and fixing bend of required

degree with access door, insertion

rubber washer 3mm thick, bolts and

nuts complete.

100mm dia. Sand cast iron S&S pipe as

per I.S. 1729.

Each 24 840.31 20167.44






Schedule of Rates


Sl

No


44 Providing lead caulked joints to sand

cast iron/centrifugally cast (spun) iron

pipes and fittings of diameter.

100mm Each 24 271.88 6525.12

45 Providing and fixing M.S. stays and

clamps for sand cast iron/centrifugally

cast (spun) iron pipes of diameter.

100mm Each 32 104.38 3340.16

46 Providing and fixing PTMT towel rail

complete with brackets fixed to

wooden cleats with C.P. brass screws

with concealed fitting arrangement of

approved quality colour and make.

450mm long towel rail with total length

of 495mm, 78mm wide and effective

height of 88mm, weighing not less than

170gms.

Each 12 433.96 5207.52

WATER SUPPLY :

47 Providing and fixing G.I. pipes

complete with G.I. fittings and clamps,

including cutting and making good the

walls etc. internal work-exposed on

wall.

a) 20mm dia nominal bore Metre 120 194.14 23296.80

b) 32mm dia nominal bore Metre 60 317.37 19042.20

c) 40mm dia nominal bore Metre 240 380.41 91298.40

48 Providing and fixing medium grade G.I.

pipes complete with G.I. fittings and

clamps, including cutting and making

good the walls etc. Concealed pipe

including painting with anti-corrosive

bitumastic paint, cutting chase and

making good the wall.

a) 20mm dia nominal bore Metre 185 253.79 46951.15

b) 25mm dia nominal bore Metre 145 312.57 45322.65

c) 32mm dia nominal bore Metre 185 363.99 67338.15

49 Providing and fixing medium grade G.I.

pipes complete with G.I. fittings

trenching and refilling etc. External

work

a) 20mm dia nominal bore

Metre 50 178.22 8911.00

b) 25mm dia nominal bore

Metre 50 240.71 12035.50

c) 40mm dia nominal bore

Metre 80 339.87 27189.60






Schedule of Rates


Sl

No


50 Providing, hoisting, fitting and fixing in

position Polyethylene Vinyl Chloride

water storage tank with cover and

suitable locking arrangement including

making connection of intake, delivery,

outlet and waterflow pipes etc. with all

lead and lift up to all stories

a) 500 ltr. capacity tank

Each 10 4006.39 40063.90

b) 10000 ltr. capacity tank

Each 1 66672.83 66672.83

51 Providing and fixing C.P. brass bib

cock,15mm nominal bore, of approved

quality conforming to IS:8931

Each 34 389.10 13229.40

52 Providing and fixing brass stop cock of

approved quality

15mm nominal bore

Each 22 167.07 3675.54

53 Providing and fixing gun metal gate

valve with C.I. wheel of approved

quality (screwed end)

40mm nominal bore

Each 34 1049.68 35689.12

DRAINAGE AND SEWERAGE :

54 Providing and laying and jointing

glazed stoneware pipes grade 'A' as

per I.S.:651 including bends etc. with

stiff mixture of cement mortar in the

proportion of 1:1(1 cement: 1 fine sand)

including testing of joints etc.

complete.

150mm diameter

Metre 70 344.98 24148.60

55 Providing and laying cement concrete

1:5:10 (1 cement: 5 coarse sand: 10

graded stone aggregate 40mm

nominal size) up to haunches of S.W.

pipes including bed concrete as per

standard design.

150mm diameter S.W. pipe

Metre 70 406.97 28487.90






Schedule of Rates


Sl

No


56 Construction brick masonry chamber

for underground C.I. inspection

chamber and bends with 7.5 class

designation bricks in cement mortar 1:4

(1 cement : 4 coarse sand) C.I. cover

with frame (light duty) 455x610mm

internal dimensions, total weight of

cover with frame not to be less than

38kg (weight of cover 23kg and weight

of frame 15kg) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4


nominal size) foundation concrete

1:5:10 (1 cement : 5 fine sand : 10


nominal size), inside plastering 12mm

thick with cement mortar 1:3 (1 cement

: 3 coarse sand) finished smooth with a

floating coat of neat cement on walls

and bed concrete etc. complete as

per standard design.

Inside dimension 455x610mm and 45cm

deep for single pipe line - with F.P.S.

bricks.

Each 20 4698.62 93972.40

57 Construction of septic tank of 25 user

capacity including all arrangement

and fittings as per drawing No.

CE/R(M)/12/65 including in all respect

with contractor's own labour, materials

and equipments including supply of

cement with all leads, lifts, descent

etc. complete in all respect . The work

will also include excavation and refilling

as required including supply of H.C.I soil

pipe connecting as directed by

Engineer in charge at site.

Each 6 58000.00 348000.00

58 Making soak pit 2.5m diameter 3.0m

deep with 45x45cm dry brick honey

comb shaft with bricks of class

designation 7.5 and S.W. drain pipes

100mm diameter, 1.8m long complete

as per standard design, including

excavation complete.

With F.P.S. bricks

Each 6 16833.33 100999.98

59 Extra for every cm depth above 3.0m

as per site conditions if required.

cm

depth

200 56.11 11222.00






Schedule of Rates


Sl

No


60 Any other items of work not included in






Rs.1000000.00

LS LS Please

quote……. %

age At per /

Above / Below.

(Please strike

out whichever

not applicable)

1000000.00

Total of Sch. B 14531554.88






Schedule of Rates


Schedule-C: (Road Works)

Sl

No


1 Earth work in excavation (box cutting

for road alignment) as per approved

drawings and dumping at

embankment site or spoil heap, within

railway land, including 50m lead and

1.5m lift, the lead to be measured from

the centre of gravity of excavation to

centre of gravity of soil heap: the lift to

be measured from natural ground level

and paid for in layers of 1.5m each, as

per specifications-in.

All kinds of soil. cum 900 109.04 98136.00

2 Preparation of sub grade by

excavating earth up to 22.50 cm

depth, dressing to camber and

consolidating with power road roller of

8 to 12 tonne capacity including

making good the undulations etc. and

disposal of surplus earth with lead up to

50 mtrs.

Sqm 1600 50.57 80912.00

3 Supplying, spreading and consolidating

of GSB layer for 30 cm thick over sub

grade layer including dressing to

proper camber and to its final

dimensions as required to achieve the

required thickness. The rate shall

include the cost of materials with all

leads, lifts, loading, unloading, royalty,

taxes, tools and plants, labour and

materials required. If required blending

of two or more materials available

locally is to be done to attain the

specific grade ratio of grain sizes or

quality as required as per specifications

for road works.

cum 480 470.80 225984.00

4 Providing and laying water bound

macadam with specified stone

aggregate, stone screening and

binding material including screening,

sorting, spreading to template and

consolidation with power road roller of

8 to 10 tonne capacity etc. complete.

a) Sub-base with stone aggregate 90mm

to 45mm including stone screening

13.2mm size in two layers of each

75mm thick.

cum 240 2527.94 606705.60






Schedule of Rates


Sl

No


b) Base course with 63mm to 45mm size

including stone screening 13.2mm size

in single layer of each 75mm thick.

cum 120 1808.47 217016.40

c) Base course with 53mm to 22.4mm size

including stone screening 11.2mm size

in single layer of each 75mm thick.

cum 120 1872.34 224680.80

5 Supplying and filling sand in plinth and

under floors including watering

ramming consolidating and dressing

complete.

cum 25 1315.68 32892.00

6 Cement concrete Grade M15 of

coarse aggregate 40mm nominal size,

in CC pavements (20 cm thick) laid to

required slope and camber in panels

as required including consolidation

finishing and tamping complete.

cum 25 5001.67 125041.75

7 Providing and laying Dry Brick (FPS

bricks of class designation 7.5) edging

laid length wise with half brick depth

including excavation, refilling /

ramming and disposal of surplus earth

lead up to 50 metres.

Metre 120 29.74 3568.80







Rs.20000.00

LS LS Please

quote……. %

age At per /

Above / Below.

(Please strike

out whichever

not applicable)

20000.00

Total of Sch. C 1634937.35






Schedule of Rates


Schedule-D: (BORE WELL & TUBE WELL.)

Sl

No


1 Selection of suitable site for drilling bore

well/tube well by electrical resistivity

method for all diameters.

Each 4 903.04 3612.16

2 Drilling of bore well for specified depth

in all types of soil and rock

mechanically with all contractor's tools,

plants, material and labour up to 75

metres

a) For 150mm dia

Metre 75 228.18 17113.50

b) Extra over 75 mtr. drilling for 150 mm

dia.

Metre 10 273.82 2738.20

3 Supplying, fitting, fixing in position extra

strainer 40 mm dia & 1.83 m long

including drilling.

Brass Strainer mesh type.

Each 4 632.20 2528.80

4 Providing, supplying, lowering and

fixing in bore G.I.B class perforated

casing pipe 6mm thickness up to

specified depth below ground level

with contractor's tools, plants, material

and labour etc. complete. a) 100 mm

internal pipe.

Metre 10 1030.28 10302.80

5 Providing, supplying, lowering and

fixing in bore unperforated MS casing

pipe 6mm thickness up to specified

depth below ground level with

contractor's tools, plants, material and

labour etc. complete. a) 100 mm

internal pipe.

Metre 65 1030.28 66968.20






Schedule of Rates


Sl

No


6 Supplying, fitting, fixing & installing

including boring of 40mm dia hand

tube well assembly India marked II

having total depth of 50m with the

following components as per IS:9301:

(i)Hand pump(single acting) India

mark-II galvanised as per IS:9301-90. (ii)

Brass strainer mesh type made of long

slotted medium B class G.I pipes with 80

mesh brass wire net wrapping around

the perforated pipe and jacked by

26/28 SWG brass perforated sheet.

40mm dia (2 lengths of each 1.83 m

connected with G.I. socket). (iii) C.I

cylinder with G.M. parts India mark -II

65mm dia X 0.45 m long as per IS: 9301-

90. (iv)G.I casing pipe 100mm dia

medium quality ISI marked 18m long (v)

G.I pipe 40mm dia medium quality ISI

marked 28.35m long.(vi) 32mm dia GI

pipe (riser) medium quality ISI marked

17m long

Each 3 62970.53 188911.59

(vii)12mm dia bright bar electro

galvanised connecting rod, 3.0m long

each as per IS: 9301 of length as

required. (viii) all accessories as per

IS:9301-90 such as G.I. reducing socket

100mm X 40mm, C.I. plug cutter 40mm,

base plate, M.S. nuts and bolts etc. The

works also includes priming,

development and testing of the yield

(which should be sufficient enough) for

seven days with all labour, materials,

tools and plants complete. (ix) 40mm

dia G.I. ISI marked medium quality

hanging pipe to the extent of 17m. (x)

all accessories such as C.I. plug cutter

40mm, base plate, M.S. nuts & bolts

etc. as required. The work also includes

priming & development and testing of

the yield (which should be sufficient

enough) for seven days with cost of

labour and materials, all tools and

plants complete in all respect.






Schedule of Rates


Sl

No


7 Extra/Less for sinking including drilling,

supplying, fitting, fixing, & installing of

G.I. casing pipe 100 mm dia medium ISI

marked over 18m.

Metre 10 1084.80 10848.00







Rs.60000.00

LS LS Please

quote……. %

age At per /

Above / Below.

(Please strike

out whichever

not applicable)

60000.00

Total of Sch. D 363023.25






Schedule of Rates


Schedule-E: (External & Internal Electrical works.)

Sch-E-1 (20m high Mast Tower). Sl

No


1 Supply of 20 m High mast shaft in two

sections suitable for 50m/sec Wind

speed, with raising towering system

comprising, head frame, luminaries

carriage suitable to install 2 X 400W

HPMH T luminaries in symmetrical

arrangement, double drum winch,

6mm diameter SS wire rope, trailing

cable, connector, integral power tool

motor, reversing starter for power tool

motor, manual handle junction box,

lightning arrangement.

No. 1 340000.00 340000.00

2 Supply of foundation bolts

manufactured from special steel along

with nuts, washers, anchor plates and

templates

No. 1 11500.00 11500.00

3 Supply of non-integral floodlight

luminaries with two nos. 400W MH T

lamps and control gear boxes. The

supply includes mounting accessories

required to fix lighting fixture with Mast.

No. 12 14500.00 174000.00

4 Supply of twin dome aviation

obstruction lights with 2 Nos 110W GLS

lamps

No. 1 3500.00 3500.00

5 Supply of control panel housing 32A

TPN MCB incomer, single dial timer

contractor circuit for the automatic

control of luminaries, outgoing terminals

and power tool.

No. 1 28500.00 28500.00

Erection Part

6 Design & casting of suitable RCC

foundation for 20m high mast

No. 1 117000.00 117000.00

7 Erection of High Mast with the help of

suitable equipment and wiring of

luminaries with all fittings including twin

dome.

No. 1 57000.00 57000.00

8 Erection of the above panel on suitable

foundation including all materials and

labour (Sl No 5 above)

No. 1 4000.00 4000.00

9 GI pipe earthing with 40mm 2.5m long

pipe. The connections to be made with

25X5 sq mm GI strip.

No. 2 11000.00 22000.00






Schedule of Rates


Sl

No


10 supply of 1100V grade XLPE cable, PVC

outer sheathed cable 3.5 X 35 sq mm

Mtr. 300 308.76 92628.00

11 Laying of above cable Mtr. 300 109.20 32760.00

12 Supply & laying of 100mm dia (G.I pipe)

for track/road crossing as required & as

per the direction of engineer-in-charge

including 1.1KV-11KV cable laying up

to 400 Sqmm in the pipe.

Mtr. 30 452.02 13560.60

Total of Sch. E-1: 896448.60






Schedule of Rates


Sch-E-2. (100 KVA Out Door Type Sub Station).

Sl

No


1 Supply & fixing of Gang operated Air

Break Switch 11 kV grade, 20 Amp 3-

phase.

No. 2 18400.00 36800.00

2 Supply of Transformer (oil cooled), 100

kVA, 11KV /433V outdoor type

distribution transformer, vector group

Dyn11 core or shell type, low loss, high

permeability grain oriented cold rolled

silicon steel lamination. The coils are

electrolytic copper conductor &

vacuum impregnated in silicon varnish.

No. 2 281405.00 562810.00

3 Installation, testing and commissioning

of 11 kV / 433 V transformer indicated

in serial no 2

No. 2 23287.50 46575.00

4 Supply of two pole structure consisting

of Double pole structure of 200 x 100

mm. ISMB section of 12 mts Height with

100 ISMC cross channels suitable for

mounting of 11 kV, G.O.S. lightning

arrester, pin insulators, disc insulators

etc as per required standards

complete with all accessories and

necessary civil works & consisting of

following items

Set

2

158700.00

317400.00 i) 11 kV pin insulator (3 no in each set) -

2 set

ii) 11 kV class disc insulator - 3 nos

iii) ACSR l conductor - 50 mts

iv) Stay set complete with 7 / 8 SWG GI

wire shackle insulator and tension

arrangement - 2 set

v) 11 kV 200 A horn gap fuse fitting

complete with mounting bracket

( 3 no in each set ) - 2 set

vi) 9 kV, 5kA distribution class lightning

arrester complete with mounting

clamps ( 3 no in each set ) - 1 set

vii) Boundary wall & fencing for pole

mounted - 1 no

viii) Fabrication & Painting of DP

structure - 1 no






Schedule of Rates


Sl

No


5 Supply of XLPE insulated & extruded

pvc inner sheathed aluminium

conductor armoured & overall

extruded pvc outer sheathed H.T

power cable 11KV grade conforming

to IS 7048 of size 3x35 sqmm.

Mtr 2500 1107.45 2768625.00

6 Laying of above H.T power cable 11KV

grade directly in ground including

excavation with sand, protection

covering bricks & refilling of trench etc

as required at site.

Mtr 2500 109.20 273000.00

7 Supply of XLPE insulated & extruded

pvc inner sheathed aluminium

conductor armoured & overall

extruded pvc outer sheathed power

cable 1100V grade conforming to IS

7048 of size 3.5x50 sqmm.

Mtr 200 398.45 79690.00

8 Laying of above power cable 1100 V

grade directly in ground including

excavation with sand, protection

covering bricks & refilling of trench etc

as required at site.

Mtr 200 109.20 21840.00

9 Supply. installation & commissioning of

3 HT panel board-

i) 11KV, 800Amp, 250MVA vacuum

circuit breaker - 3 nos.

ii) Digital type metering system such as

energy meter, volt meter, ammeter

etc.

iii) All type of protective devices such

as earth fault overload relay etc.

Supply

Set 1 1358437.50 1358437.50

Erection

Set 1 27641.25 27641.25

10 Supplying & making INDOOR cable

end termination with heat shrinkable

jointing kit complete with all

accessories including lugs suitable for

following size of 3 core, XLPE aluminium

conductor cable of grade as

mentioned

i) 35 sqmm,11KV

Nos. 3 4701.02 14103.06






Schedule of Rates


Sl

No


11 Supplying & making OUTDOOR cable

end termination with heat shrinkable

jointing kit complete with all

accessories including lugs suitable for

following size of 3 core, XLPE aluminium

conductor cable of grade as

mentioned

i) 35 sqmm,11KV Nos. 3 8082.45 24247.35

12 Supplying & making STRAIGHT

THROUGH cable end termination with

heat shrinkable jointing kit complete

with all accessories including lugs

suitable for following size of 3 core, XLPE

aluminium conductor cable of grade

as mentioned

i) 35 sqmm,11KV

Nos. 4 13443.28 53773.12

13 Supply, installation, connection, testing

and commissioning of 40mm dia, 3

metre long G.I. Pipe earth electrodes,

complete with pit and all necessary

materials including excavation of earth

pit, filling with Charcoal and salt, back

filling around the G.I. pipe earth

electrodes including connection to

transformer & control panel with 25x6

mm GI flats with all materials & labour.

Nos. 18 2266.65 40799.70

14 Supply & installation of factory

fabricated & wired metal clad, dust

and vermin proof floor/wall mounted 8

panel board with the following MCCB's

& instrument chamber etc. complete in

all respect. The instrument chamber

shall be separate & shall comprise of

flush type ammeter, voltmeter, selector

switches for ammeter & voltmeter

instrument fuses CT "ON" & "OFF"

indicating light etc. of suitable size as

per relevant drawing of Wagon

Rehabilitation shop, Weigh Bridge,

Shower test, Curved pit testing &

inspection shop, Covered shed for

stacking & Short Blast & paint booth &

NS Yard

No. 1 186688.70 186688.70

a) 315A TPN MCCB= 02

b) 100A TPN MCCB= 02

c) 63A TPN MCCB = 02






Schedule of Rates


Sl

No


15 Supply & installation of factory

fabricated & wired metal clad, dust

and vermin proof floor/wall mounted 3

panel board with the following MCCB'

& instrument chamber etc. complete in

all respect. The instrument chamber

shall be separate & shall comprise of

flush type ammeter, voltmeter, selector

switches for ammeter & voltmeter

instrument fuses CT "ON" & "OFF"

indicating light etc. of suitable size as

per relevant drawing of Wagon

Rehabilitation shop, Weigh Bridge,

Shower test, Curved pit testing &

inspection shop, Covered shed for

stacking & Short Blast & paint booth &

NS Yard

No. 1 115747.50 115747.50

a) 315A TPN MCCB= 03

16 Supply & fixing H.T danger notice board

plate of 250mm X 200mm made of mild

steel at least 2mm thick and vitreous

enameled white on both sides and with

inscription in single red colour on front

side as required

Nos. 4 86.62 346.48

17 Anti climbing device

a) Supply Mtr. 100 337.50 33750.00

b) Erection Mtr. 100 84.37 8437.00

Total of Sch. E-2.: 5970711.66






Schedule of Rates


Sch-E-3. (Illumination of approach Road).

Sl

No


1 Supply of GI tubular pole 9m long

complete with single/ double arm

bracket as per General specification.

No. 20 9600.00 192000.00

2 Foundation & erection of GI pole with

provision of muffing (500mm high &

350mm dia)

No. 20 2000.00 40000.00

3 Supply & fitment of GI single arm

bracket for existing GI/ Tubular pole.

No. 20 1150.00 23000.00

4 Supply & fixing of GI fabricated cable

terminal box, 4-way.

No. 20 725.00 14500.00

5 Supply of outdoor type 2x28w energy

efficient DTFL fitting include FL tube as

per Philips type HGS 120/228 for

luminaire or identical make complete

with lamp TL5 28w HE along with one

spare FL tube.

No. 20 2650.00 53000.00

6 Fixing of outdoor type Street Light

Luminaire /FL fitting with existing pole or

wall surface with supply and fitment of

medium gauge GI bend pipe and

suitable clamping arrangement etc.

No. 20 370.00 7400.00

7 Electrical connection of above street

light fittings points with 1.5 sq.mm

copper flexible single core, M/Strand

wire through flexible pvc conduit from

square terminal box installed in muffing.

No. 20 95.00 1900.00



metre long G.I Pipe earth electrodes,



pit, filling with Charcoal and salt & to

be connected with 4swg GI wire from

earth electrode to each unit to be

earthed.

No. 20 2266.65 45333.00

9 Supply & laying of 100mm dia (G.I pipe)

for track/road crossing as required & as

per the direction of engineer-in-charge

including 1.1KV-11KV cable laying upto

400 Sqmm in the pipe.

mt 40 452.02 18080.80

10 Caution board (Danger Board)

No. 20 86.62 1732.40






Schedule of Rates


Sl

No


11 Supply, testing & commissioning of XLPE

insulated & PVC sheathed aluminium

conductor armoured power cable

1.1kv grade conforming to IS:7098

(part-1) of following size

a) 3.5x25 sq.mm mt 650 254.54 165451.00

12 Laying of different size XLPE aluminium


1100 volt grade directly in ground

including excavation, sand cushioning,

protective covering of brick & refilling

of trench etc. as required at site.

mt 650 102.00 66300

Total of Sch. E-3. : 628697.20






Schedule of Rates


Sch-E-4 (Electrification of Relay room, battery room, generator room, ASM

room, SS room etc.) Sl

No


1 Supply, fixing, testing & commissioning

of AC Ceiling Fan 1200 mm sweep

(conforming to IS 374/79) with five star

marking (*****) complete with double

ball bearing including electronic

regulator, condenser, etc. in the ceiling

of building with suitable hooking

arrangements with flush mounting,

supply, connection from ceiling rose 3

core PVC flexible chord wire as per

standards.

No. 4 1932.00 7728.00

2 Supply, installation, testing,

commissioning & Provision of 2 X 4'-0" X

28w, T-5 fluorescent light fitting indoor

conforming to IS 10322 Part-5, section

2/82 with Electronic ballast, PF

improvement capacitor, starter, rotary

holders, etc., including lamp, supply,

connection from ceiling rose using 3

Core PVC flexible chord wire using

wooden round blocks, M.S. down rod/

M.S. bracket pipe on wall, etc., fixing

arrangement suitable at site locations,

etc. as required for canteen.

No. 40 1958.00 78320.00


of Exhaust Fan 450mm including wall

opening with plastering for housing

exhaust fan with 3 core x1.5 Sq.mm

PVC insulated copper cable. (Make:

Bajaj, Havells, Usha)

No. 4 2981.25 11925.00

4 Supply & wiring for light point fan point

/ exhaust fan point / call bell point with

PVC insulated copper conductor single

core cable of size 1.5 Sq.mm -2 Nos & 1

No of 14 SWG Tinned copper for Earth

Continuity in recessed PVC conduit,

including provision of control switches

terminating on a decolom finish MS

board with testing and commissioning.

The decolom board should have ISI

marking

Point 65 350.75 22798.75






Schedule of Rates


Sl

No


5 Supply and Wiring of 5amp plug points

with 1.5 sq.mm PVC single core,

M/strand copper wire through suitable

size PVC conduit pipe/ casing/

concealed & 1 no 14 SWG tinned

copper conductor for earth continuity

No. 8 165.00 1320.00

6 Supply and Wiring of 15/5amp power

plug points with 4 sq.mm PVC single

core, M/strand copper wire through

suitable size PVC conduit pipe/ casing/

concealed & 1 no 14 SWG tinned


No. 7 550.00 3850.00

7 Supplying and fixing following piano

type socket including connections etc.

as required

i) 3 pin 5/6 amps socket outlet No. 8 24.15 193.20

ii) 15/16 amps switch No. 7 43.70 305.90

iii) 5 pin 15/16 amps socket outlet No. 8 49.45 395.60

8 Supplying and fixing 5 amps to 32

amps, rating, 240 volts, 'B' series, MCB

suitable for lighting and other loads of

the following poles in the existing MCB

DB complete with connections, testing

and commissioning etc. as required

i) Single pole No. 10 98.90 989.00

ii) Supply and fixing three pole and

neutral prewired sheet steel, MCB DB,

415V on surface, recess complete with

loose wire box, terminal blocks, duly

prewired with suitable size FR PVC

Insulated copper conductor up to

terminal blocks, tinned copper bus bar,

neutral link, earth bar, din bar,

detachable gland plate,

interconnections, phosphatized and

powder painted including earthing etc

as required (But without MCB/ RCCB/

Isolator), (4 + 12 way)

No. 4 5559.10 22236.40

9 Supply, testing and commissioning of

XLPE insulated and PVC sheathed

aluminium conductor armoured power

cable 1.1KV grade conforming to

IS:7098 (Part-I) of following size

a) 3.5x16 sq.mm

mt 30 204.90 6147.00

b) 3.5x50 sq.mm

mt 400 398.45 159380.00






Schedule of Rates


Sl

No


10 Laying, transportation of different size

XLPE aluminium conductor armoured

power cable 1100 volt grade directly in

ground including excavation, sand

cushioning, protective covering of brick

& refilling of trench etc. as required at

site.

mt 400 109.20 43680.00

11 Laying, transportation of different size

XLPE aluminium conductor armoured

power cable 1100 volt grade directly in

ground including excavation, sand

cushioning, protective covering of brick

& refilling of trench etc. as required at

site.

a) 3.5x16 sq.mm

Mt. 30 102.00 3060.00

12 Supplying & laying of 100mm dia (Gl

pipe) for track/ road crossing as

required and as per the direction or

Engineer-in-charge including 1.1KV-

11KV cable laying upto 400 Sqmm in

the pipe.

Mtr. 20 452.02 9040.40

13 Wiring of Main/Sub-main with 6mm²,

PVC single core, M/ strand copper wire

through suitable size (ISI marked) PVC

conduit pipe/ casing/ concealed way

as per general specification & 1 no 14

SWG tinned copper conductor for

earth continuity

Mtr. 150 165.00 24750.00

14 Wiring of sub-main with 4mm², PVC

single core, M/ strand copper wire



as per general specification & 1 no 14


earth continuity

Mtr. 300 150.00 45000.00






Schedule of Rates


Sl

No




metre long GI Pipe earth electrodes,




filling around the GI Pipe earth

electrodes and complete including

supply/ leading/ laying/ burring and

concealing of 4 SWG GI wire from earth

electrode to proposed MDB/SDB or

elsewhere and in manner as per

standards.

No. 14 2266.65 31733.10

16 Supply & Laying of 50mm dia (GI pipe)

for track/road crossing as required and

as per the direction of Engineer-in-

charge including 1.1KV-11KV cable

laying upto 400sqmm in the pipe

Mtr. 15 193.68 2905.20


of call bell/buzzer & piano type bell

push suitable for single phase supply

230v, 50 hz supply complete as

required.

No. 2 287.00 574.00

18 Supply of GI pole 9m long complete

with single/double arm bracket as per

General specification.

No. 4 9600.00 38400.00



350mm dia).

No. 4 2000.00 8000.00


bracket for existing GI/ Tubular pole.

No. 4 1150.00 4600.00



No. 4 725.00 2900.00


efficient DTFL fitting with FL tube for

luminaire complete with lamp T-5, 28W

along with one spare FL tube.

No. 4 2650.00 10600.00


Luminaire/ F.L fitting with existing pole

or wall surface with supply & fitment of

medium gauge GI bend pipe &

suitable clamping arrangement etc.

No. 4 370.00 1480.00






Schedule of Rates


Sl

No






square terminal box installed in muffing

with all materials.

No. 4 95.00 380.00

25 Supply and fixing of Direct On Line

Starter in sheet steel metal enclosure,

capacity 2 HP, 230V, 50HZ AC with over

load relay, relay range (Max.) 12A to

20A.

No. 3 756.00 2268.00

26 Supply and fixing of 2 ton split type AC

room cooler 230V, Single Phase, 50 HZ,

AC complete with all accessories i.e.

copper cooling tube etc. operated

through remote system.

No. 3 23000.00 69000.00

27 Supply and fixing of automatic 3 pt.

source supply change over panel

complete for CLS system of capacity

60A, 240V, 50 Hz, as per RDSO

specification no. TI/SPC/PSI/CLS/0020

No. 1 51000.00 51000.00

28 Supply of storage water cooler of

capacity 150 Ltrs, cooling capacity 150

Ltrs/Hr (approx) for operation on 230v,

AC 50 c/s (Make-Blue Star, Voltas, Usha,

Sidwal etc).

No. 1 36946.00 36946.00

29 Transportation, installation, connection,

testing & commissioning of storage

water cooler along with water pipe line

connection etc.

No. 1 2500.00 2500.00

30 Supply & fixing of AC power unit in

enclosure with MCB DP 32A/25A as per

M/S north-west cat, capacity- 16A-25A

No. 1 1200.00 1200.00

31 Anti climbing device

a) Supply Mtr. 20 337.50 6750.00

b) Erection Mtr. 20 84.37 1687.40

32 Supply of Pedestal Fan 400mm sweep No. 2 2145.00 4290.00

33 Supply & fixing of 400 watt metal halide

lamps, make Havells or equivalent.

No. 2 1294.00 2588.00

Total of Sch. E-4.: 720920.95






Schedule of Rates


Sch-E -5. (Electrification of Staff quarter type-II -10 Nos). Sl

No



of AC Ceiling Fan 1200 mm sweep

(confirming to IS 374/79) with five star

marking (*****) complete with double

ball bearing including electronic

regulator, condenser, etc. in the ceiling

of building with suitable hooking

arrangements with flush mounting,

supply, connection from ceiling rose 3

core PVC flexible chord wire as per

standards.

No. 20 1932.00 38640.00

2 Supply, installation, testing,

commissioning & Provision of 2 X 4'-0" X

28w, T-5 fluorescent light fitting indoor

conforming to IS 10322 Part-5, section

2/82 with Electronic ballast, PF

improvement capacitor, starter, rotary

holders, etc., including lamp, supply,

connection from ceiling rose using 3

Core PVC flexible chord wire using

wooden round blocks, M.S. down rod/

M.S. bracket pipe on wall, etc., fixing

arrangement suitable at site locations,

etc. as required for canteen.

No. 80 1958.00 156640.00

3 Supply & wiring for light point /fan point

/ exhaust fan point / call bell point with

PVC insulated copper conductor single

core cable of size 1.5 Sq.mm -2 Nos & 1

No of 14 SWG Tinned copper for Earth

Continuity in recessed PVC conduit,

including provision of control switches

terminating on a decolom finish MS

board with testing and commissioning.

The decolom should have ISI marking

Point 110 350.75 38582.50

4 Supply and Wiring of 5 amp plug points

with 1.5 sq.mm PVC single core,

M/strand copper wire through suitable

size PVC conduit pipe/ casing/

concealed & 1 No 14 SWG tinned


No. 30 165.00 4950.00






Schedule of Rates


Sl

No


5 Supply and Wiring of 15/5amp power

plug points with 4 sq.mm PVC single

core, M/strand copper wire through

suitable size PVC conduit pipe/ casing/

concealed & 1 No 14 SWG tinned


No. 20 550.00 11000.00

6 Supplying and fixing following piano

type socket including connections etc.

as required

i) 3 pin 5/6 amps socket outlet No. 30 24.15 724.50

ii) 15/16 amps switch No. 30 43.70 1311.00

iii) 5 pin 15/16 amps socket outlet

No. 20 49.45 989.00

7 Supply and fixing 5 amps to 32 amps,

rating, 240 volts, ‘B’ series, MCB suitable

for lighting and other loads of the

following poles in the existing MCB DB

complete with connections, testing

and commissioning etc. as required

(i) Single pole

No. 10 98.90 989.00

8 Supply, testing and commissioning of

XLPE insulated and PVC sheathed

aluminium conductor armoured power

cable 1.1 KV grade conforming to IS:

7098 (Part-I) of following size.

(a) 3.5x25 sq.mm mt 450 254.54 114543.00

9 Laying of different size XLPE aluminium


1100 volt grade directly in ground

including excavation, sand cushioning,

protective covering of brick & refilling

of trench etc. as required at site.

mt 450 102.00 45900.00

10 Supplying & laying of 100mm dia (GI

pipe) for track/ road crossing as

required and as per the direction of

Engineer-in-charge including 1.1KV-

11KV cable laying up to 400 Sqmm in

the pipe.

Mtr. 30 452.02 13560.60

11 Wiring of Main/ Sub-main with 6mm²,

PVC single core, M/strand copper wire

through suitable size PVC conduit pipe/

casing/ concealed way as per general

specification & 1 No 14 SWG tinned


Mtr. 60 165.00 9900.00






Schedule of Rates


Sl

No


12 Wiring of sub-main with 4mm², PVC

single core, M/strand copper wire



as per general specification & 1 No 14


earth continuity

Mtr. 250 150.00 37500.00



metre long GI Pipe earth electrodes,




filling around the GI Pipe earth

electrodes and complete including

supply/ leading/ laying/ burring and

concealing of 4 SWG GI wire from earth

electrode to proposed MDB/SDB or

elsewhere and in manner as per

standards.

No. 14 2266.65 31733.10

14 Supply & Laying of 50mm dia (GI pipe)

for track/ road crossing as required and

as per the direction of Engineer-in-

charge including 1.1KV-11KV cable

laying up to 400Sqmm in the pipe

Mtr. 15 193.68 2905.20


of call bell/ buzzer & piano type bell

push suitable for single phase supply

230v, 50 hz supply complete as

required.

No. 10 287.00 2870.00

16 Supply & fixing of 16''x12'' T.W. board

with hylam sheet complete with ISI

mark single phase energy meter 240v

AC, 50 hz ISI no. 13779 IMC no. 1036

+1,5amp to 30 amp for LCD display,

make Anchor or similar type.

No. 10 650.00 6500.00

17 Supply of GI pole 9m long complete

with single arm bracket as per General

specification.

No. 12 9600.00 115200.00



350mm dia).

No. 12 2000.00 24000.00


bracket for existing GI/Tubular pole.

No. 12 1150.00 13800.00



No. 12 725.00 8700.00






Schedule of Rates


Sl

No



efficient DTFL fitting include lamp for

luminaire or identical make complete

with lamp TL5 28w HE along with one

spare FL tube.

No. 12 2650.00 31800.00


Luminaire/ F.L fitting pole with supply &

fitment of medium gauge GI bend

pipe & suitable clamping arrangement

etc.

No. 12 370.00 4440.00





square terminal box installed in muffing.

No. 12 95.00 1140.00

Total of Sch. E-5 718317.90

GRAND TOTAL OF SCH. E= (E-1+ E-2 +E-3 + E-4+ E-5) 8935096.31






Schedule of Rates


FORM-SP2

NAME OF WORK: EXECUTION PACKAGE – II, FOR RAIL INFRASTRUCTURE INCLUDING LAYOUT OF NAPHTHA UNLOADING YARD OF BRAHMAPUTRA CRACKER AND POLYMER LIMITED (BCPL) AT LEPETKATA, DIBRUGARH (ASSAM).

BIDDING DOCUMENT NO.: 6907/125/OT/RITES- EIL/EXECUTION/PKG-II/ 2011

EXTENDED STAY COMPENSATION

SL. NO.

DESCRIPTION RATE IN RUPEES

1. Rate of Extended Stay Compensation per Month beyond the Time Schedule and grace period mentioned in Bidding Document for reasons solely attributable to Owner.

_________________ Per Month

NOTES: 1. Extended Stay Compensation shall be loaded on the quoted prices as per clause no.

47.0 of Special Conditions of Contract. 2. In case no rate for Extended Stay Compensation is stipulated, it will be considered that

Extended Stay Compensation is not required by the Bidder and the rates quoted by them shall be valid till completion of works in all respects.

Date post:	30-Jan-2018
Category:	Documents
Upload:	vuongkien
View:	228 times
Download:	0 times

SCHEDULE OF · PDF file1 | Page Signature of the bidder Under seal of the firm Brahmaputra...

Documents