+ All Categories
Home > Documents > Schlage L-Series Locks Anti-Ligature SolutionsLigature ......Pd tO iProduct Overview FAQs 2...

Schlage L-Series Locks Anti-Ligature SolutionsLigature ......Pd tO iProduct Overview FAQs 2...

Date post: 13-Oct-2020
Category:
Author: others
View: 0 times
Download: 0 times
Share this document with a friend
Embed Size (px)
of 25 /25
Schlage L-Series Locks Anti Ligature Solutions Schlage L-Series Locks Anti Ligature Solutions Anti-Ligature Solutions Anti-Ligature Solutions Training Presentation September 1, 2011 © 2011 Ingersoll Rand
Transcript
  • Schlage L-Series Locks Anti Ligature SolutionsSchlage L-Series Locks Anti Ligature SolutionsAnti-Ligature SolutionsAnti-Ligature SolutionsTraining Presentation

    September 1, 2011© 2011 Ingersoll Rand

  • Agendag

    IntroductionStatistics

    P d t O iProduct OverviewFAQs

    Anti-Ligature Solution Company Confidential – for internal use only2

  • Introduction

    • Suicide is the 11th leading cause of death in the United States, g ,with over 31,000 people taking their life annually. 1,500 suicides occur while in hospitals1; it is also the leading cause of death while incarcerated4. Ligature strangulation (hanging) is g g ( g g)the primary means used to end one’s life in these environments.

    S hl ff l t l ti ifi ll d i d• Schlage now offers a complete solution specifically designed to reduced the risk of injury or death due to hanging for use in psychiatric wards, mental health facilities, and detention

    t A ti li t k b l th bt d li dcenters. Anti-ligature knobs, levers, thumbturns, and cylinder rings combined with IVES anti-ligature door hinges offer substantial patient protection along with differentiation from

    Anti-Ligature Solution Company Confidential – for internal use only3

    competitors.

  • IntroductionStatistics

    P d t O iProduct OverviewFAQs

    Anti-Ligature Solution Company Confidential – for internal use only4

  • Suicide Statistics

    • US General Statistics• US General Statistics– 11th leading cause of death (homicide is 13th)2

    – 3rd leading cause of death for 15-24 year olds2

    – 32,637 suicides, over 800k attempts in 20052

    • Hospital Statistics– ~1500 suicides in inpatient hospital units annually3p p y– Doors/door hardware involved in 28% of all suicides3

    • Jail Statistics• Suicide is leading cause of death in jails (29%)4• Suicide is leading cause of death in jails (29%)

    • Juvenile Confinement Statistics• Includes detention centers, training schools, ranches, camps 5

    5

    Anti-Ligature Solution Company Confidential – for internal use only5

    • Door/door hardware involved in over 21% of suicides 5

  • Facility Statisticsy

    • 5 795 hospitals (includes 444 psychiatric hospitals)6• 5,795 hospitals (includes 444 psychiatric hospitals)6• 3,375 state or county jails7• 2 939 juvenile detention centers82,939 juvenile detention centers• 179 federal prisons9

    Anti-Ligature Solution Company Confidential – for internal use only6

  • IntroductionStatistics

    P d t O iProduct OverviewFAQs

    Anti-Ligature Solution Company Confidential – for internal use only7

  • SK1 and SL1:Anti-Ligature Knob & Leverg

    • Door hardware specifically designed to reduce the ability• Door hardware specifically designed to reduce the ability to injure through hanging (ligature strangulation).

    • Available as knob (SK1) or lever (SL1). Thumbturn and ( ) ( )cylinder also specially designed as anti-ligature.

    • For L series Mortise Locks only; available as option or retrofitretrofit.

    Anti-Ligature Solution Company Confidential – for internal use only8

  • 5 Facets of Anti-Ligature SafetyI

    Recessed T i

    g y

    Trim

    IIV

    Increased Safety

    Slope on non-vertical

    Surfaces

    Internal Clutch in

    Lever

    Safety

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    Anti-Ligature Solution Company Confidential – for internal use only9

  • I. Recessed Trim

    • Rose and thumbturn are recessed to reduce• Rose and thumbturn are recessed to reduce apparent gap between trim, minimizing opportunity for securing a ligature.

    Minimal seam

    IRecessed

    Trim

    Minimal seam in door trim

    Increased Safety

    II20° Slope on non-vertical

    Surfaces

    VInternal

    Clutch in Lever

    y

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    Anti-Ligature Solution Company Confidential – for internal use only10

  • II. Slope on Surfacesp

    • All non vertical surfaces angled to decrease• All non-vertical surfaces angled to decrease opportunity for attachment to trim.

    No flat surfaces

    IRecessed

    Trim

    Cylinde

    Thumbtu

    No flat surfacesto attach ligature

    Increased Safety

    IISlope on

    non-vertical

    Surfaces

    VInternal

    Clutch in Lever

    erurnK

    noLevy

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    obver

    Anti-Ligature Solution Company Confidential – for internal use only11

  • III. Concealed Hardware

    • All mounting hardware concealed or recessed• All mounting hardware concealed or recessed, eliminating opportunity to secure a ligature.

    IRecessed

    Trim

    No exposed hardware

    Increased Safety

    IISlope on

    non-vertical Surfaces

    VInternal

    Clutch in Lever Hardware recessed

    y

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    Anti-Ligature Solution Company Confidential – for internal use only12

    SL1 Lever Shown

  • IV. Thumbturn and Cylindery

    • ADA compliant thumbturn has a sloped surface and• ADA compliant thumbturn has a sloped surface and positive stops to prevent over-rotation and presentation of horizontal surface (possible ligature point). Cylinder ring has sloped trim, again minimizing attachment opportunity.

    Positive stops -turn never goes horizontal

    IRecessed

    Trim Sloped Surface

    Increased Safety

    IISlope on

    non-vertical Surfaces

    VInternal

    Clutch in Lever

    p

    y

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    Anti-Ligature Solution Company Confidential – for internal use only13

  • V. Internal Clutch (Lever only)( y)

    • SL1 lever free rotates if excessive force applied• SL1 lever free-rotates if excessive force applied. Mechanism self-contained so compatible with all L locks. Resets by moving handle back to normal position. Not applicable to SK1 due to round shape of knob.

    IRecessed

    Trim

    Increased Safety

    IISlope on

    non-vertical Surfaces

    VInternal

    Clutch in Lever

    y

    IIIConcealed Mounting Hardware

    IVThumbturn & Cylinder

    Anti-Ligature Solution Company Confidential – for internal use only14

  • Part Overview – SK1 KnobThumbturn

    Cylinder

    Inside Knob

    Outside Knob

    Anti-Ligature Solution Company Confidential – for internal use only15

  • Part Overview – SL1 LeverThumbturn

    Cylinder

    Inside Lever

    Outside Knob

    Anti-Ligature Solution Company Confidential – for internal use only16

  • Simple Installationp

    • Follows standard L Series door prep; simply replace• Follows standard L-Series door prep; simply replace handle/thumbturn/cylinder with anti-ligature version.

    Anti-Ligature Solution Company Confidential – for internal use only17

  • Anti-Microbial Optionp

    • Anti Microbial option is a coating applied at• Anti-Microbial option is a coating applied at the factory that lasts the lifetime of the product

    • Silver-ion based finish inhibits cell viability by limiting y y gability to absorb oxygen, process food, or reproduce

    • Effective against bacteria, mold, fungus, mildew, algae.• Coating supplier EPA registered, FDA listed under

    21CFR 175.300• Available for both SK1 knob and SL1 leverAvailable for both SK1 knob and SL1 lever• Add ‘AM’ to finish suffix (i.e., 630AM)

    Anti-Ligature Solution Company Confidential – for internal use only18

  • Anti-Ligature Hingeg g

    • Complements anti ligature knob & lever by minimizing• Complements anti-ligature knob & lever by minimizing door hardware attachment point.

    • Order through IVES - specify HT (hospital tip) as hinge g p y ( p p) goption (available on all IVES butte and pin and barrel continuous hinges)

    Angled “hospital tip” minimizes attachment

    Traditional hingewith flat tip presents li t tt h t minimizes attachment opportunityligature attachmentopportunity

    Anti-Ligature Solution Company Confidential – for internal use only19

  • IntroductionStatistics

    P d t O iProduct OverviewFAQs

    Anti-Ligature Solution Company Confidential – for internal use only20

  • FAQs

    • What is the difference between an anti-ligature knob and anti-ligature lever?What is the difference between an anti ligature knob and anti ligature lever?Both the Schlage SK1 anti-ligature knob and SL1 anti-ligature lever offer increased patient protection by minimizing apparent attachment points on the door hardware. Deciding between the two solutions is a matter of preference, although only the SL1 lever is ADA compliantlever is ADA compliant.

    • Is this different than the Schlage Prison Knob from several years ago? Yes – the SK1 knob differs from the XPO knob of the past in that it is significantly p g yeasier to grip, twist, and pull. This allows for increased ease of use, and a wider variety of applications.

    • When will the product be available?• When will the product be available? The SK1 anti-ligature knob, thumbturn and cylinder are currently available. The SL1 anti-ligature knob is available to order now, with product delivery starting in May 2011.

    Anti-Ligature Solution Company Confidential – for internal use only21

  • FAQs

    • What are the normal lead times for the product?What are the normal lead times for the product? You can expect a lead time of 6 weeks for the Anti-Ligature knob or lever.

    • Can I mix-and-match anti-ligature knobs and levers with each other or with other L-series knobs and levers?You can mix the anti-ligature knob and lever, but you cannot mix an anti-ligature knob or lever with a traditional knob or lever.

    • What claims can be made about the product? As you can imagine, careful consideration needs to be given before claiming any product performance characteristics. Anything that is published in the public lit t i d b l l f Pl d t d hliterature is approved by legal for your use. Please do not expand or paraphrase beyond what you see in print.

    Anti-Ligature Solution Company Confidential – for internal use only22

  • FAQs

    • Is there a cylindrical lock or Falcon version available? No - the trim is only offered on the L-Series mortise lock.

    • Are there any other restrictions with the Schlage Anti-Ligature Trim? This trim is not available with "L" cylinder option (Lock Less Cylinder), LLL (lock less case), Lock less components, standard ADA thumbturn (L583-363), tactile or knurlingknurling.

    Anti-Ligature Solution Company Confidential – for internal use only23

  • A diAppendix

    Anti-Ligature Solution Company Confidential – for internal use only24

  • Sources

    1 Center for Disease Control and Prevention1 Center for Disease Control and Prevention2 suicide.org3 The Joint Commission Journal on Quality and Patient Safety, Impatient

    Suicide and Suicide Attempts in Veterans Affairs Hospitals, August 2008Suicide and Suicide Attempts in Veterans Affairs Hospitals, August 20084 US Dept of Justice, Bureau of Justice Statistics, Mortality in Local Jails 2000-

    20075 Juvenile Suicide in Confinement: A National Survey, National Center on y,

    Institutions and Alternatives6 American Hospital Association, 2009 Data7 Sourcebook of Criminal Justice Statistics 2003 (data from 1999)8 Office of Juvenile Justice and Delinquency Prevention (data from 1999)9 Federal Bureau of Prisons, www.bop.gov

    Anti-Ligature Solution Company Confidential – for internal use only25


Recommended