Price Book 74Effective March 4, 2013 Rev. 3/13

Price Book 74Effective March 4, 2013 • Rev. 3/13

Schlage Price Book 74Effective March 4, 2013

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative OfficesIngersoll Rand Security Technology11819 North Pennsylvania StreetCarmel, IN 46032

(800) 847-1864FAX (800) 452-0663

Customer Care

Commercial3899 Hancock ExpresswayColorado Springs, CO 80911

(877) 671-7011FAX (800) 452-0663Order EntryFAX (800) 452-0665

Residential2119 E. Kansas City RoadOlathe, KS 66061

Sales Support(800) 847-1864Tech Support(888) 805-9837

CanadaIngersoll Rand Security Technology1076 Lakeshore Road EastMississauga, Ontario L5E 1E4Canada

(905) 403-1800FAX (905) 278-1413

Internethttp://www.schlage.com

Certifications:Schlage products, as noted in our catalog, are tested by independent laboratories for compliance with UL and ANSI standards. Any field modification or alteration of product will void certification.For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.

Disclaimer:The Schlage Lock Company reserves the right to make changes in designs and specifications, to make addition or improve-ments on its products or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition or alteration to our products by others.

Copyright 2013, Ingersoll RandAll rights reserved, printed in USA

SSC CarolinaCharlotte, NC 28214ssccarolina@irco.com704-549-1999SSC Central Olathe, KS 66061ssccentral@irco.com 913-393-8700SSC ChicagoAddison, IL 60101sscchicago@irco.com877-282-1721SSC FloridaOrlando, FL 32817sscflorida@irco.com407-571-2000SSC Great LakesPittsford, NY 14534sscupstatenewyork@irco.com585-248-1520SSC Metro New YorkElmsford, NY 10523sscmetronewyork@irco.com914-742-2760

SSC MichiganLivonia, MI 48150sscmichigan@irco.com734-655-8181SSC Mid-AtlanticWilmington, DE 19809sscmidatlantic@irco.com800-996-2961SSC MidwestIndianapolis, IN 46250sscindiana@irco.com317-715-4500SSC Mountain StatesGolden, CO 80401ssccolorado@irco.com720-279-5600

Salt Lake City, UT 84115801-401-5400SSC New EnglandNeedham Heights, MA 02494sscnewengland@irco.com781-453-5300SSC North CentralEden Prairie, MN 55346sscnorthcentral@irco.com952-674-4940

SSC Northern CaliforniaPleasanton, CA 94588sscnortherncalifornia@irco.com925-462-4777SSC NorthwestBothell, WA 98011sscnorthwest@irco.com425-686-3615Vancouver, WA 98661360-356-3035SSC SouthNorcross, GA 30071sscsouth@irco.com678-906-2103SSC Southern CaliforniaArcadia, CA 91006sscsoutherncalifornia@irco.com626-359-5555SSC SouthwestTempe, AZ 85281sscarizona@irco.com480-377-6700SSC TexasPlano, TX 75024ssctexas@irco.com972-378-1191

Houston, TX 77086713-683-6400

SSC Western Canada

British ColumbiaRichmond, BC V5G 4K4604-473-5600AlbertaCalgary, AB T1Y 6C1403-287-1190Saskatchewan/ManitobaWinnipeg, MB R2J 4G7204-786-6355OntarioMississauga, ON L5E 1E4905-403-1800 877-590-4734

SSC Eastern CanadaQuebecMontreal, PQ H4S1N8514-385-0005

Atlantic CanadaNova Scotia902-864-0368

CanadaUnited States Commercial

Price Book 74Effective March 4, 2013 • Rev. 3/13

Table of Contents

i

Terms & Conditions Terms-1 Standard Terms. . . . . . . . . . . . . . . . . . . Terms-2 Freight Weight Chart . . . . . . . . . . . . . . Terms-4 Schlage . . . . . . . . . . . . . . . . . . . . . . . . Terms-4 Portable Security . . . . . . . . . . . . . . . . Terms-5 General Terms and Conditions for Sales and Service . . . . . . . . . . . . . . Terms-6 Product Warranties . . . . . . . . . . . . . . . . Terms-8 Commercial Applications . . . . . . . . . . . Terms-8 Residential Applications . . . . . . . . . . . . Terms-8 Distributor Function and Location Policy Terms-9 Cylinder Policies . . . . . . . . . . . . . . . . . . Terms-10 Primus® Sales Policy . . . . . . . . . . . . . . . Terms-10 Everest® Sales Policy . . . . . . . . . . . . . . Terms-11 Everest Small Format Interchangeable Core Key Control Policies . . . . . . . . . . Terms-12 Restricted Keyway Policy . . . . . . . . . . . Terms-12 Construction Core Program Policy . . . Terms-12 Door Labeling Policy . . . . . . . . . . . . . . . Terms-13 Master Key Shipment Policy . . . . . . . . Terms-13 Hardware Finishes . . . . . . . . . . . . . . . . Terms-14Parts Index Index-1Forms & Examples Forms-1 Where to Send Orders . . . . . . . . . . . . . Forms-1 How to Determine Hand of Door . . . . . Forms-1 How to Determine Hand of Parts (Handed Levers) . . . . . . . . . . . . . . . . . . Forms-1 How To Order . . . . . . . . . . . . . . . . . . . . Forms-2 Ordering Examples . . . . . . . . . . . . . . . . Forms-3 Order Forms . . . . . . . . . . . . . . . . . . . . . Forms-4 Using Order Forms . . . . . . . . . . . . . . . . Forms-4 Sequential List of Order Forms . . . . . . Forms-4

COMMERCIALA-Series . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Functions . . . . . . . . . . . . . . . . . . . . . . A-2 Complete Locks . . . . . . . . . . . . . . . . . A-3 Options . . . . . . . . . . . . . . . . . . . . . . . . A-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . A-7AL-Series . . . . . . . . . . . . . . . . . . . . . . . . AL-1 Functions . . . . . . . . . . . . . . . . . . . . . . AL-2 Complete Locks . . . . . . . . . . . . . . . . . AL-3 Options . . . . . . . . . . . . . . . . . . . . . . . . AL-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . AL-8B250-Series . . . . . . . . . . . . . . . . . . . . . . B250-1 Functions . . . . . . . . . . . . . . . . . . . . B250-2 Complete Locks . . . . . . . . . . . . . . . B250-3 Options . . . . . . . . . . . . . . . . . . . . . . B250-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . B250-8B500-Series . . . . . . . . . . . . . . . . . . . . . . B250-1 Functions . . . . . . . . . . . . . . . . . . . . B250-2 Complete Locks . . . . . . . . . . . . . . . B250-3 Options . . . . . . . . . . . . . . . . . . . . . . B250-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . B250-8B600/700/800-Series . . . . . . . . . . . . . . . B600-1 Functions . . . . . . . . . . . . . . . . . . . . . . B600-2 Complete Locks . . . . . . . . . . . . . . . . . B600-3 Options . . . . . . . . . . . . . . . . . . . . . . . . B600-5 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8D-Series Knobs . . . . . . . . . . . . . . . . . . . D-1 Functions . . . . . . . . . . . . . . . . . . . . . . D-2 Complete Locks . . . . . . . . . . . . . . . . . D-4 Options . . . . . . . . . . . . . . . . . . . . . . . . D-5 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . D-8ND-Series Levers . . . . . . . . . . . . . . . . . ND-1 Functions . . . . . . . . . . . . . . . . . . . . . . ND-2 Complete Locks . . . . . . . . . . . . . . . . . ND-5 Options . . . . . . . . . . . . . . . . . . . . . . . . ND-6 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . ND-12H-Series . . . . . . . . . . . . . . . . . . . . . . . . . H-1 Functions . . . . . . . . . . . . . . . . . . . . . . . H-2 Complete Locks . . . . . . . . . . . . . . . . . H-3 Options . . . . . . . . . . . . . . . . . . . . . . . . H-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . H-9L-Series . . . . . . . . . . . . . . . . . . . . . . . . . L-1 Functions . . . . . . . . . . . . . . . . . . . . . . L-2 Complete Locks . . . . . . . . . . . . . . . . . L-8 Options . . . . . . . . . . . . . . . . . . . . . . . . L-20 Distributor Pack Program . . . . . . . . . . L-27 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . L-32S-Series . . . . . . . . . . . . . . . . . . . . . . . . . S-1 Functions . . . . . . . . . . . . . . . . . . . . . . . S-2 Complete Locks . . . . . . . . . . . . . . . . . S-3 Options . . . . . . . . . . . . . . . . . . . . . . . . S-4 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . S-7CS210-Series . . . . . . . . . . . . . . . . . . . . . CS210-1 Functions . . . . . . . . . . . . . . . . . . . . . . CS210-2 Complete Locks . . . . . . . . . . . . . . . . . CS210-3 Options . . . . . . . . . . . . . . . . . . . . . . . . CS210-5 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . CS210-7S200-Series . . . . . . . . . . . . . . . . . . . . . . S200-1 Functions . . . . . . . . . . . . . . . . . . . . . . S200-2 Complete Locks . . . . . . . . . . . . . . . . . S200-3 Options . . . . . . . . . . . . . . . . . . . . . . . . S200-5 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . S200-8Electronics See - Schlage Electronic Security Price Book 24

Table of Contents

Price Book 74Effective March 4, 2013 • Rev. 3/13

ii

CYLINDER/KEYS/PORTABLE SECURITY/ CABINET LOCKSCylinders CYL-1 Schlage Cylinder & Keyway Terminology CYL-2 Multiple Tailpiece Cylinders . . . . . . . . . CYL-3 Bulk Pack Cylinders . . . . . . . . . . . . . . . CYL-4 Primus Cylinders-Sub-Assembled . . . CYL-5 A & H, AL, CL, D, ND, F, FA, PL, S & S200 . . . . . . . . . . . . . . . . . . . . . . . . CYL-6 B500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-14 B100, B250, B400, E/B, F100, H, MD, S200 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-16 B300, BA300, F300, FA300 . . . . . . . . . CYL-20 B600/700/800 . . . . . . . . . . . . . . . . . . . . CYL-22 BC100 . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-26 Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-28 Schlage cylinders for Falcon & Von Duprin . . . . . . . . . . . . . . . . . . . . . . . CYL-38 Rim Cylinders . . . . . . . . . . . . . . . . . . . . CYL-39 Interchangeable Cores . . . . . . . . . . . . . CYL-41 Competitor Retrofit Cylinders . . . . . . . CYL-43 Letter/Mail Box . . . . . . . . . . . . . . . . . . . CYL-47 Special Cylinders . . . . . . . . . . . . . . . . . CYL-48 Pins, Springs & Pinning Components . CYL-49 Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-51 Shells . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-52 Competitive Keying Kit Refills . . . . . . . CYL-53Keys & Keying Keys-1 Keys Ordered Separately . . . . . . . . . . Keys-2 Key Stamping . . . . . . . . . . . . . . . . . . . . Keys-12 Cylinder Stamping. . . . . . . . . . . . . . . . . Keys-13 Construction Core Program . . . . . . . . . Keys-14 Keying Charges . . . . . . . . . . . . . . . . . . . Keys-16 QuicKey Program . . . . . . . . . . . . . . . . . Keys-21 SITEMASTER 200 ® . . . . . . . . . . . . . . . . Keys-23Portable Security PS-1 PL Series Cross Reference . . . . . . . . . . PS-3 Key-In-Knob with Cylinder . . . . . . . . PS-4 Key-In-Knob Less Cylinder . . . . . . . . PS-5 SFIC Less Cylinder . . . . . . . . . . . . . . . . PS-6 Full Size IC Core . . . . . . . . . . . . . . . . . PS-7 Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks . PS-8 Parts and Accessories . . . . . . . . . . . . . PS-9 Flex Security . . . . . . . . . . . . . . . . . . . . . PS-12CL-Series CL-1 Complete Locks . . . . . . . . . . . . . . . . . . CL-2 Options . . . . . . . . . . . . . . . . . . . . . . . . . CL-3 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-4

MISCELLANEOUSTools & Kits Tool-1 Keying Tools & Kits . . . . . . . . . . . . . . . Tool-2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-6 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-8Merchandising Aids Merch-1 Display Mounts . . . . . . . . . . . . . . . . . . Merch-3 Miscellaneous . . . . . . . . . . . . . . . . . . . Merch-4

Price Book 74Effective March 4, 2013 • Rev. 3/13

How to Use the Price Book

iii

1. Standard Orders These orders are for the comprehensive listing of the current product offering shown in this price book.

2. Schlage Innovation Center Orders (RFQ) These orders are for Request For Quote (RFQ) orders which are not covered in the price book and are subject to longer lead times. These orders may not be combined with any Master Keyed or Non-Master Keyed products. Use this process for custom logo requests.

3. Fast Track Orders These orders are for products in the Fast Track price book and qualify for expedited order processing. This program includes Schlage and Ingersoll Rand Security Technologies brand products. Please consult your sales representative for Fast Track program availability in your area.

Your Purchase Order see information required on your order in “Forms & Examples” price book tab.

Schlage Innovations Center Product Request Formms-s100 5/03 RF 07 03 2009

Refer to Fast TrackPrice Book

All orders will be processed based on normal factory lead times. An anticipated ship date will be included with each order acknowledgement.

These products are not in the price book and must be requested for consideration. Instructions are included in the Innovations Center Product Request Process in this section.

See current Fast Track price book. Phone number 1-877-671-7011 or fax number 1-800-288-4242

Com

mer

cial

Pro

duct

s *

1. Master Keyed Orders These orders are subject to standard lead time and process. Please attach the necessary forms if a restricted key system or Primus order.2. Non-Master Keyed Orders These orders are subject to standard lead time and process. If you are ordering a restricted key system or Primus order, please attach the necessary forms.3. Primus Face Sheet Original signed form must accompany any Primus or Primus XP level 3, 4, or 9 order.4. Primus Signature Card Original signed form must accompany any NEW Primus or Primus XP level 3, 4, or 9 order.5. Key System Summary Please fill in all appropriate fields. Contact your local Ingersoll Rand Security Technologies sales office for help.

Master Keyed Order Form ms-i100.01 Rev. 3/01 ms-i100.02 Rev. 3/01 ms-i150 Rev. 2/01Non-Master Keyed Order Form ms-i250 Rev. 2/01 ms-i300 Rev. 2/01Primus Face Sheet ms-e120 7/02

Primus Signature Form ms-e130 Rev 09/07

Key System Summary ms-i200 Rev 5/03 All 4 Pages

Use of order forms other than Schlage order forms can result in an increased lead time. An anticipated ship date will be included with each order acknowledgement.

Use of order forms other than Schlage order forms can result in an increased lead time.

Must submit original forms, copies are not accepted.

Must submit original forms, copies are not accepted.

Please make sure the form identifies the key system as NEW or EXISTING If removeable cores, make sure control keys are ordered. Do not forget to mark the type of keys, stamping information, etc.

1. Standard Order Plan All residential Schlage, and Dexter by Schlage products currently listed in this price book.

Your Purchase Ordersee information required on your order in “Forms & Examples” price book tab.

All orders will be processed based on normal factory lead times. An anticipated ship date will be included with each order acknowledgement.

Key

s R

esid

entia

l Ordering Options Form Name and Number Notes

How to Use the Price Book

Price Book 74Effective March 4, 2013 • Rev. 3/13

iv

Standard ProductsIn each tabbed section of this Price Book you will find a comprehensive listing of our current offering per product series. Products should be ordered via the traditional method by designating the product, design, finish, handing, and options for each line item (refer to “How to Order” in the Forms & Examples section of the price book). All orders will be processed based on normal factory lead times. These lead times vary throughout the year and are affected by production volumes, supplier schedules and quantity demands. An anticipated ship date will be included with each order acknowledgement.

Some of the products listed in these sections require extended lead times. You will find the hourglass symbol (6) associated with products that require extended lead times so that you are aware of this condition prior to placing your order. Products included in this classification are those items that represent a unique combination of product attributes (i.e. finish, trim, function, etc.) that typically require additional manufacturing care and attention. Products marked “6” will routinely exceed normal fac-tory lead times and anticipated ship dates will be indicated with each order acknowledgement.

Schlage Innovation Center Product Request Process

What are Schlage Innovation Center?

Schlage Innovation Products are products that are not in the price book and are formally requested through the Schlage Innovation Center Product Request Process. Examples of these products include:• ProductswhichatonetimewereofferedforsalebySchlagebutarenolongeravailableinthecurrentpricebook.• FinishesnotlistedasstandardforaproductinthePriceBook.• “True”customproducts,whicharenewvariationsoncurrentorpastproducts.• Customlogorequests.

How does the Schlage Innovation Center Request Process work?

• CompleteandfaxtheSchlageInnovationCenterProductRequestFormlocatedinForms&ExamplestoyourIngersollRand Security&SafetyConsultant.Faxnumbersareonthereversesideoftheform.• Uponreceipt,yourIngersollRandSecurity&SafetyConsultantwilldetermineifcurrentPriceBookitemswillsatisfyyour need instead of Custom Products. • IfCustomProductsarenecessary,yourIngersollRandSecurity&SafetyConsultantwillforwardtheformtothefactoryfor consideration as a formal Request for Quotation (RFQ).• Uponreceipt,theRFQCoordinatoratthefactorywillclarifytherequests.Onceclarified,yourrequestisassignedanRFQ number and forwarded to Product Management for consideration. • Within10-workingdays,yourrequestiseitherdeniedoracknowledgedthroughyourIngersollRandSecurity&Safety Consultant. If acknowledged, Schlage agrees to pursue the request and will advise a time to expect a firm quotation of pricing and lead-time. Acknowledgment of the request does not guarantee that Schlage will bid or fulfill this RFQ. It simply means Schlage will give your request further evaluation.• Uponfurtherevaluationofacknowledgedrequestsbyacross-functionalteamdedicatedtothisprocess,adecisionismadeto eitherapproveandbidonyourrequestortodeclinetobid.YouwillbeadvisedbyyourIngersollRandSecurity&Safety Consultant at that time if it is not approved and the reason for declining to bid. • Iftherequestisapproved,youwillbeadvisedofthenon-negotiable net price, lead time and RFQ number, which must be prominently marked on your purchase order for the Custom Product. Custom Product orders may not be mixed with current Price Book items.• OrderssubmittedforCustomProductswithoutavalidRFQnumberwillberejectedbyOrderEntry,andyouwillbereferredto yourIRSecurity&SafetyConsultanttostartthisprocess.

Price Book 74Effective March 4, 2013 • Rev. 3/13

How to Use the Price Book

v

Commercial Master Keyed Orders

In an effort to expedite the process of managing our growing volume of Master Keyed order requests, Master Keyed orders submitted in the following choice of formats will receive factory lead times based on the following criteria:

• OrderssubmittedontheKeySystemSummaryform(MS-I200)andtheMasterKeyedOrderforms(MS-I100andMS-I150)

OR

• OrderssubmittedontheKeySystemSummaryform(MS-I200)andyourpurchaseorderwithinformationspecifiedinthe following sequence:

LeadtimesforMasterKeyedordersinanyotherformatwillbeextendedatleast5additionalworkingdays.Inallcases,allowadditional lead time for clarifications and complex keying requirements. The Master Keyed order forms are located in the Forms & Examples/Keys and Keying sections of the price book. For your convenience you can download the Master Keyed order forms from our web site at http://professional.schlage.com/sales_service/sss_forms.asp

Commercial QuicKey ProgramOur QuicKey Program is designed to help you get the key blanks and Everest® small format interchangeable cores you need with the shortest possible lead time. All standard bow and embossed key blanks, including restricted and Primus® blanks are included in this program. The following guidelines must be adhered to in order to take advantage of this program:

• Allordersmustbeprominentlymarked“QuicKey”onthetopofyourorderand/oruseourQuicKeyOrderFormfoundinthe Forms & Examples section.

• QuicKeyordersmustbecomprisedof100%qualifyingkeyblanksand/orcores(i.e.notcombinedwithordersforany other products).

• WhenorderingPrimusorotherrestrictedkeyblanks,theappropriatefacesheetsandlettersofauthorizationmustaccompany your order.

QuicKeykeyblanksareavailableonlyinboxesof50withexceptionofcontrolkeys.PrimusandEverestkeyblanksorderedviathisprogramwillshipin5-daysandClassicandcompetitivereplacementkeyblankswillshipin10-days.MixedQuicKeyorders will revert to the longer lead time. For complete program details and product availability refer to the QuicKey listing in the Keys & Keying section of the price book.

Residential KeyingResidential Master Key (RMK): RMK is a single key that will grant access to all opening with in the facility (i.e. master key). Additionally, each tenant would need to be provided with a key that will grant them access to their apartment only. The same keying situation would exist in any form of a multi family housing complex.

Residential Construction Keying (RCK): RCK (also referred to as loss ball) by design allows the use of a temporary master keyduringtheconstructionphaseofaproject.Attheendoftheconstructionphase,theuseofthehomeownerkeywilltriggerthe lost ball construction device, thus eliminating the temporary master key used during construction.

Qty Product Design Finish Hand Latch Strike Add’l Details Door Detail Information DHI Key Symbol

MASTER KEYED ORDERS

Schlage Forms (MS-I200, MS-I100, MS-I150)

Non-Schlage Forms

LEAD TIMES

Factory Lead Time

Extended Lead TimeAdditional 5 WorkingDays Minimum

Notes

Price Book 74Effective March 4, 2013 • Rev. 3/13

vi

Terms-1Price Book 74Effective March 4, 2013 • Rev. 3/13

TERMS & CONDITIONSIntroduction

Table of ContentsGeneral Terms and Conditions for Sales and Service Terms-2Standard Schlage Product Terms and Conditions Terms-6Freight Weight Chart Terms-9 Schlage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terms-9 Portable Security . . . . . . . . . . . . . . . . . . . . . . . . Terms-11Product Warranties Terms-12 Commercial Applications . . . . . . . . . . . . . . . . . Terms-12 Residential Applications . . . . . . . . . . . . . . . . . . Terms-13Distributor Function and Location Policy Terms-13Cylinder Policies Terms-14 Schlage Key Systems . . . . . . . . . . . . . . . . . . . . Terms-14 Restricted Keyway Policy . . . . . . . . . . . . . . . . . Terms-15 Construction Core Program Policy . . . . . . . . . . Terms-16 Primus® Sales Policy . . . . . . . . . . . . . . . . . . . . . .Terms-16Door Labeling Policy Terms-18Master Key Shipment Policy Terms-18Hardware Finishes Terms-19How To Order Forms and Examples

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-2

TERMS & CONDITIONS • Complete Locks

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate differ-ent or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER'S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER'S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.

2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configura-tion ID numbers, necessary programming information, special factory instructions, and requested specifica-tions regarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the mini-mum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Ingersoll Rand customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledg-ment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 35% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledg-ment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Ingersoll Rand customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, mark-ing, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time the quote was issued by Company. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date, provided that Customer may take a 2% discount if Customer pays in cash and Company receives said payment within 20 days of the invoice date. For the avoidance of doubt, cash discounts do not apply to credit card payments. Customer will make all payments in United States dollars. Past due invoices will be subject to a late pay-ment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges.

4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot

be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate this Agreement and/or Customer’s ability to distribute Company’s products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables.

6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.

7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Customer will adhere to any MSRP or resale pricing programs of Company, and will not resell Company’s products to a reseller or third-party for a price lower than Customer’s buy program acquisition cost, unless authorized to do so in writing by Company. Failure to comply with this provision will be considered a material breach of this Agreement, and will entitle Company to immediately terminate this Agreement and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contrac-tors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instruc-tions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/or general contractors, examples of which may include, but are not limited to, sup-port activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any noncon-formance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company's facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company's factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “Ex-works, Company's factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company's factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request.

11. SHIPPING & SHIPPING PROGRAMS. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the Ingersoll Rand customer website (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s freight shipping guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submit-ted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a purchase order cannot be combined with any other order to qualify

13-3/1

Ingersoll Rand Company Security Technologies Sector General Terms and Conditions of Sale and Service

Terms-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Complete Locks • TERMS & CONDITIONSfor freight allowances. In addition, Customer may not combine any Company brands or product catego-ries on a single order to meet the applicable net freight allowance, except in the case of: i) FastTrack 24 Hour/5 Day Program, which is available for Schlage, Von Duprin, LCN and Glynn-Johnson products; ii) FastTrack 24 Hour/3 Day Program, which is available for Falcon Locks, Exits and Closers and Ives products. When an order includes products from the brands listed in both (i) and (ii) above, the order will automatically default to the FastTrack 24 Hour/5 Day Program lead times and freight allowance.

12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submit-ted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless other-wise agreed by the parties.

13. PRODUCT CHANGES. Company’s policy is one of ongoing update and revision, accordingly Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.

14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.

15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns, (a) in the event Company approves such a return, a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 35% of the net material on the original invoice; and (b) Only Deliverables that are new, current, standard, non-obsolete, non-specially manufac-tured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be deter-mined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s busi-ness, trade address or other designations. Upon termination of this Agreement, any use of Company’s trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE INGERSOLL RAND CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instruc-tions provided by Company to Customer; (H) have been subjected to improper temperature, humidity,

or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manu-factured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and work-manship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship.

19. LIMITATION OF REMEDIES.CUSTOMER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the forego-ing, liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attribut-able or related to i) any breach of any representation or warranty made by Customer, its officers, direc-tors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect not-withstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any appli-cable worker’s compensation act, disability or other employee benefit act. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (includ-ing the attorneys’ fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be

13-3/2

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-4

interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modi-fied or altered Deliverable.

22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect.

25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.

26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, con-ditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.

27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer’s financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon ter-mination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.

29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of

the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any com-mitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to cre-ate a franchise relationship or business opportunity between the Parties, then Company may terminate this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or busi-ness opportunity agreement.

31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibil-ity for backcharges for the cost of material or labor by Customer or any third party.

32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment process-ing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regula-tions in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its own-ers, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retain-ing business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduc-tion of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowl-edge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Ingersoll Rand customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE. c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement. f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compli-ance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246 and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and

13-3/3

TERMS & CONDITIONS • Complete Locks

Terms-5Price Book 74Effective March 4, 2013 • Rev. 3/13

at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its perfor-mance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforce-able under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such perfor-mance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representa-tive of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation; (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.

DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Ingersoll-Rand Company, Security Technologies Sector Terms and Conditions of Sale and Service, together with any applicable Ingersoll-Rand Country Supplement or Region Supplement, and all of the documents referenced herein or therein.

"Affiliate" means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term "control" (including the terms "controlled by" and "under common control with") means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise.

"Business Day" means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business.

“Company” means Ingersoll-Rand Company, Security Technologies Sector or any subsidiary or affili-ate thereof. Ingersoll-Rand and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement.

“Company Marks” refers to the Marks of Company.

“Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be fur-nished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement.

“Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials.

“Customer” means the purchaser of Deliverables from Company.

“Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service.

“End Users" means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate's/Affiliates' internal use and not for resale, remarketing or distribution or (ii) incorpora-tion into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division.

"IP" means all intellectual property and industrial property rights comprising or relating to/of the fol-lowing: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyright-able, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.

“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks.

“Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement.

"Patents" means all patents (including all reissues, divisionals, provisionals, continuations and continu-ations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (includ-ing inventor's certificates, petty patents and patent utility models).

“Person” means a person or entity.

“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being pur-chased by Customer.

"Trade Secrets" means and includes business or technical information of either party, including pro-cesses, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.

13-3/4

Complete Locks • TERMS & CONDITIONS

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-6

TERMS & CONDITIONS • Standard Schlage Product Terms and Conditions

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. All prices may be subject to discount. Products considered “Specials” (“X” designated part numbers) fall outside ofstandard discount terms. Contact Customer Care for clarification.Minimum Order Size for Channel Discount:All orders less than $500.00 list shall be discounted at book net.Claims and Returns: Claims and Returns:

CommercialThe following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this Price Book.

Due to Schlage error:• Claimsforshortagesand/orincorrectlyfilledordersmustbefiledwith Customer Service within 30-days of receipt of material. • Incorrectorderacknowledgmentsmustbechangedbyemailingrequestto Customer Care territory email box upon receipt of acknowledgment. Refer to inside cover of this book.• InvoiceadjustmentsmustbefaxedtoCreditAdjustments@(317)810-3048 within 30-days of receipt of invoice.• Returnedgoodswillnotbeacceptedwithoutpriorwrittenapprovalfrom Schlage.CreditwillbebasedupontheReturnMaterialAuthorization(RMA) issued by Customer Service or the IngersollRand Security & Safety Consultant and final acceptance by Schlage. Returns must be prominently marked with the RMA number and follow return guidelines on the RMA form. Return freight cost is prepaid by the customer and reimbursed at UPS ground rate.• ProductconsideredbeingdefectiveafterreviewbytheIngersollRand Security & Safety Consultant must be returned to the Schlage Lock Company facility in Security, Colorado accompanied by an RMA. Replacement orders for defective product will be entered by Customer Service at the time of notification.

Due to Customer error:• ItisthepolicyoftheSchlageLockCompany to not accept returns of any materials that are correctly furnished as per the dealer’s purchase order.• Returnofproductduetocustomerordererror or accommodation must be pre-arranged with the IngersollRand Security & Safety Consultant and approved by Business Unit Manager. • Returnsaresubjecttoaminimumrestocking charge of 35% for unopened cases.• Materialsarenotreturnable.• Productmustbereceivedinoriginalfactory condition and certified as such by Schlage Receiving.• Noreturnfreightchargeswillbecredited.

UndernocircumstancesisSchlageliableforincidentalorconsequentialdamages.Charge-backswillnotbeallowed.

Terms-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Standard Schlage Product Terms and Conditions • TERMS & CONDITIONS

Order Changes or Cancellations:

Type of Product •Primus® Keys Normal Factory 6 Extended Factory TypeofChange •QuicKey LeadTimeItems LeadTimeItems1. Change to: • OK within first 2-days • OK within first 10-days from receipt of order . from receipt of order . – Product, creating a different SKU number Not Accepted • If after 2-days, item must • If after 10-days, item must – Keying* be deleted from order be deleted from order (see 3, 25% handling (see 3, 50% handling charge will apply) and charge will apply) and entered as a new order entered as a new order (see 2) . (see 2) .2. Change to: • New order with normal lead-time must be generated for additions . Same terms & conditions will be applied if – Increase quantity of Not Accepted requested so long as the original order has not been existing item(s) shipped . • Additions received after the original order ships must be – Add new item(s) entered as a new order and will stand-alone for lead-

time and terms & conditions .3. Change to: • OK within first 2-days • OK within first 10-days – Delete item(s) from receipt of order . from receipt of order . Not Accepted • If after 2-days, subject to • If after 10-days, subject to – Reduce quantity of handling charge of 25% of handling charge of 50% of existing item(s) the net price of the deleted the net price of the deleted item(s) .** item(s) .** – Cancel order

Notes: 1) ChangeordersmustbeemailedtoyourCustomerCareterritoryemailbox.Pleasestatechangeorderrequestinsubject line.Forquestionscall(877)671-7011. 2) Customer Care will acknowledge receipt of change orders and action taken. 3)Changeordersresultinginhandlingchargesrequirecustomerreviewpriortochangebeingmade.

* Includes any change to key symbol, door identification and/or cylinder pinning. ** Handling charges are billed on the original order.

Commercial

Delivery:

For the following: Non-MasterKeyedorders

MasterKeyedorders orNon-MasterKeyedordersprominentlymarkedonthe order to “Ship Complete”

Expect this delivery:

All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of the nature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are available tospecificchannelsofdistributionfor1and5-daydeliverythroughtheIngersollRand Fast Track Program. The IngersollRand Fast TrackProgramissubjecttoseparatetermsandconditions.

Factory items will individually be assigned ship dates based on current lead times.The entire order will be assigned ship dates grouped byfactorylocation.Itemswithlongestcurrentleadtimesdetermineship date for other items from that location.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-8

TERMS & CONDITIONS • Standard Schlage Product Terms and Conditions

The following specific product terms and conditions supersede the general terms and conditions of sale and service only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this Price Book.

The price list in this price book supersedes and cancels all previous price lists contained in any other price books or versions thereafter. Prices shown are subject to change without notice. All prices are subject to discount. Products considered “Specials” (“X” designated part numbers) fall outside of standard discount terms. Contact customer service for clarification.Service Charges:Servicechargesonpastdueinvoices(exceptvalidlydisputeditems)willbeassessedasfollows:11/2%permonthorthemaximumallow-able by law on past due amounts open as of the last day of each calendar month until the past due amounts are paid.

Changes or Cancellations:Changesorcancellationstoanordermustbeinwritingandmayresultinadditionalchargesforlaborand/ormaterials.Changesmayresultinadelayinthescheduledshipdate.Additionstoorderswillbeenteredasseparatestand-aloneordersandmustqualifyforalltermsofsale, including discounts, on an individual basis. Changes or deletions resulting in an order size of less than our minimum will not be accepted.Ordersfornon-cataloged,specialornonstandarditemsmaynotbecanceled.Factoryordersmaynotbechangedwithin7days.

Claims and Returns:Claimsforshortagesand/orincorrectlyfilledordersmustbefiledwithCustomerServicewithin10daysofreceiptofmaterial.PriceadjustmentsmustalsobemadeinwritingtoCustomerServicewithin30daysfromreceiptofinvoice.NoreturnedgoodswillbeacceptedwithoutwrittenapprovalfromSchlage.CreditwillbebaseduponthewrittenauthorizationoftheIRSchlagerepresentativeandfinal acceptance by Schlage. Such returns must be prominently marked with the return goods authorization number and shipped prepaid. Returns,ifapproved,willbesubjecttoaminimumrestockingchargeof35%forunopenedcasesreceivedinthesameconditionaswhensold by Schlage. Materials are not returnable. Charge-backs will not be allowed.Freight Policy:Customerordersinexcessof$1,000NetwillbeshippedfreightprepaidbySchlagetoasingledestinationpointintheU.S.OrderslessthanthisamountwillshipUPS/RPSprepaidandactualfreightwillbeindicatedonthecustomer’sinvoice.AllgoodsareshippedF.O.B.factory or DSC and become the customer’s property when they pass into the hands of the transportation company. Schlage reserves the righttouseourchoiceofcarrier.Schlagewillshipasrequested,freightcollect,ifthecustomeriswillingtobeartheentireexpenseandsoindicatesontheorder.OtherdeliveryoptionsincludeNextDay,2-day,and3-dayshipping.

Taxes:Prices do not include any present or future Federal, State or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith.

Delivery:Orders will be assigned ship dates and acknowledged accordingly, based on estimates of availability of products. Specific scheduled ship dates are not guaranteed by Schlage because of the nature of product, labor, availability of material or manufacturing conditions that might be beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowl-edged ship dates.

Certifications:Schlageproducts,asnotedinourcatalog,areproducedandtestedbyindependentlaboratoriesforcompliancewithULandANSIstan-dards. Any field modification or alteration of product will void certification.Copyright2008,IngersollRandCompanyAll rights reserved. Printed in U.S.A.

Residential

Terms-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Schlage Freight Weight Chart • TERMS & CONDITIONSTERMS & CONDITIONS • Standard Schlage Product Terms and Conditions

Standard Pack

Lock Case Avg. Wt. Cubic Case Dimensions (inches) Series Functions Quantity perCase Feet Length Width Depth Keyed 20 36 1.4 8.88 15.75 17.88 A Non-keyed 20 28 1.4 8.88 15.75 17.88 Dummy trim 20 8 0.6 4.75 14.38 14.55 Lever designs 20 36 1.7 9 13 25.5 AL Keyed & non-keyed 6 25.9 1.5 16.6 15.2 10.2 Dummy trim 6 9.3 1 13.8 13.6 9.6 B560 20 33.5 1.0 6.5 15.25 18.25 B562 20 41 1.0 6.5 15.25 18.25 B250PD 20 28 1.0 6.5 15.25 18.25 B B252PD 20 37 1.0 6.5 15.25 18.25 B600/700/800 12 36.5 0.6 6.5 12.12 13.75 BA BA360 12 22 0.6 6.5 12.12 13.75 BA362 12 25 0.6 6.5 12.12 13.75 BE BE365 6 33 1.0 9.25 13.5 14.125

D Knobs Keyed & non-keyed 10 31 0.7 8.88 8.75 15.38 Dummy trim 10 17 0.3 4.75 7.75 14.38 ND Levers Keyed & non-keyed 6 34 1.5 17 14 10.6 Dummy trim 6 9.3 1 13.8 13.6 9.6 Keyed knobs (non Orbit) 20 0 1.4 8.88 15.75 17.88 Keyed levers 20 41.6 2 9 12 32 Keyed Orb 20 41.6 1.4 8.88 15.75 17.88 Keyless knobs (non Orbit) 20 30 1.4 8.88 15.75 17.88 Keyless levers 20 41.6 2 9 12 32 F Keyless Orb 20 41.6 1.4 8.88 15.75 17.88 Dummy knobs 20 7.6 0.6 4.75 14.38 14.55 Dummy levers 30 11.4 0.9 4.75 14.5 22.25 F360 & F255E 4 23 1.4 8.5 16 17.25 F362 4 24 1.4 8.5 16 17.25 F393 4 22 1.4 8.5 16 17.25 Keyed knobs 10 18.5 0.7 8.88 8.75 15.38 Keyed levers 16 41 1.7 9 13 25.5 Keyless knobs 10 18.5 0.7 8.88 8.75 15.38 FA Keyless levers 16 36.2 1.7 9 13 25.5 Dummy knobs 10 5 0.3 4.75 7.75 14.38 Dummy levers 20 16 1.0 6.5 15.25 18.25 FA360 4 33 2.1 9 16 26.25 FA362 4 35 2.1 9 16 26.25 FE FE395 6 30.3 1.5 10.6 14 17 FE375 6 25.5 1.5 10.6 14 17 H110 10 40 1.7 21.1 14.5 9.4 H153 10 43 1.7 21.1 14.5 9.4 H H170 20 28 1.9 23.1 16.1 8.9 H172 20 38 1.9 23.1 16.1 8.9

Freight Weight ChartShipping weights shown represent anapproximation of theaverage weight for anylock and are intended only for use in estimating transportation and tariff charges. They aresubjecttovariationsdue to changes in manufacturing or methods of packing.

continued on next page

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-10

TERMS & CONDITIONS • Freight Weight Chart

Key Blanks

Box Avg. Wt. Case Avg. Wt. Case Product Quantity perBox Quantity perCase CubicFeet 5-Pin 50 1.2 1000 23.5 .2 6-Pin Classic 50 1.2 1000 24.6 .2 Everest® 50 1.75 500 17.9 .2 Everest 29™ 50 1.75 500 17.9 .2

Schlage

Standard Pack (continued)

Lock Case Avg. Wt. Cubic Case Dimensions (inches) Series Functions Quantity perCase Feet Length Width Depth JD60 24 35.85 0.93 13.58 12.01 8.46 JD62 24 44.66 0.93 13.58 12.01 8.46 JD80 24 21.04 0.55 10.87 9.73 7.48 JD80 24 25.30 0.58 12.28 10.35 7.87 JH60 4 20.24 0.80 11.81 7.68 13.19 JH62 4 21.34 0.80 11.81 7.68 13.19 JH193 4 16.06 0.80 11.02 15.35 17.91 JH58 4 13.86 0.80 11.81 7.68 13.19 JH59 24 26.77 1.20 16.54 13.39 8.27 JI58 24 30.36 1.56 21.18 17.8 6.38 Dexter JI59 12 33.88 1.10 13.58 12.8 9.84 JI18 24 29.04 1.56 21.18 17.8 6.38 JI19 12 34.32 1.10 13.58 12.8 9.84 JT58 20 27.72 1.83 14.96 13.39 14.17 Keyed Levers 24 43.12 2.24 18.11 13.39 14.17 Non-keyed Levers 24 32.56 2.24 22.44 18.9 6.69 Dummy Trim Levers 50 28.16 1.46 14.41 13.31 11.65 Keyed Knobs 24 31.46 1.23 12.20 10.63 14.57 Non-keyed (J40) Knobs 24 31.02 1.23 12.20 10.63 14.57 Non-keyed (J10) Knobs 24 25.52 1.23 12.20 10.63 14.57 Dummy Trim Knobs 50 17.82 0.98 14.37 14.17 7.09 Keyed Stratus knob 24 29.04 1.23 12.20 10.63 14.57 Non-keyed (J40) Stratus 24 25.96 1.23 12.20 10.63 14.57 Non-keyed (J10) Stratus 24 23.98 1.23 12.20 10.63 14.57 Dummy Trim Stratus knob 50 15.40 0.98 14.37 14.17 7.09 L400 1 1.7 0.1 6.5 5.5 3 L9000 4 35 0.9 11.2 11.8 11.3 S 6 18 1.5 17 14 10.6 S200 6 24.5 1.5 17 14 10.6 CL CL100 20 16.6 0.6 4.75 14.38 14.55 CL200 20 16.6 0.6 4.75 14.38 14.55

Freight Weight ChartShipping weights shown represent anapproximation of theaverage weight for anylock and are intended only for use in estimating transportation and tariff charges. They aresubjecttovariationsdue to changes in manufacturing or methods of packing.

Terms-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Portable Security Case Case Cubic Case Dimensions (inches) Product Description Qty. Wt. Feet Length Width Depth 810223 Cinch Ring Security Chain - 4’ 3” 1 7.49 0.14 2.5 10 10 810230 Cinch Ring Security Chain - 2’ 3” 1 4.29 0.07 4.5 4.25 6.25 KKX16 Security Chain & Padlock - 3’ 5” 1 6.69 0.07 4.5 4.25 6.25 KKY16 Security Chain & Padlock - 5’ 6” 1 9.97 0.14 2.5 10 10 KC215E130 Locking Cable SFIC (Less Cylinder) 6’ x 5/8” 1 3.97 0.16 2.8 10.4 9.5 KC215E220 Locking Cable KNK Cylinder 6’ x 5/8” KD 1 3.93 0.16 2.8 10.4 9.5 KC220E220 Locking Cable KNK Cylinder 6’ x 3/4” KD 1 5.47 0.16 2.8 10.4 9.5 KC215E230 Locking Cable KNK (Less Cylinder) 6’ x 5/8” 1 4.1 0.16 2.8 10.4 9.5 KC220E230 Locking Cable KNK (Less Cylinder) 6’ x 3/4” 1 5.25 0.16 2.8 10.4 9.5 KC215A230 Locking Cable KNK (Less Cylinder) 2’ x 3/4” 1 2.1 0.16 2.8 10.4 9.5 KC215B230 Locking Cable KNK (Less Cylinder ) 4’ x 3/4” 1 4.2 0.16 2.8 10.4 9.5 KC215A130 Locking Cable SFIC (Less Cylinder) 2’ x 3/4” 1 2.1 0.16 2.8 10.4 9.5 KC215B130 Locking Cable SFIC (Less Cylinder) 4’ x 3/4” 1 4.2 0.16 2.8 10.4 9.5 999201 Rekeyable Locking Cable - 6’ x 5/8” (15mm) 5 17.14 1.02 12.75 8 17.25 999218 Locking Key Cable - 5’ x 1/2” (12mm) 5 5.71 0.29 11 5 9 999225 Resettable Combination Cable - 5’ x 3/8” (10mm) 5 6.66 0.31 10 6 9 820406 Heavy Duty Double Loop Steel Cable - 7’ x 5/8” (15mm) 5 15.01 0.84 11.25 12 10.75 820413 Heavy Duty Double Loop Steel Cable - 15’ x 5/8” (15mm) 4 21.12 1.14 13.13 12.25 12.25 999249 Double Loop Flexible Steel Cable - 4’ x 3/8” (10mm) 5 4.49 0.24 11 6.5 5.75 999256 Double Loop Flexible Steel Cable - 7’ x 3/8” (10mm) 5 7.01 0.32 13.75 6 6.75 999263 Double Loop Flexible Steel Cable - 15’ x 3/8” (10mm) 5 12.65 0.67 12.25 9.5 10 999270 Double Loop Flexible Steel Cable - 30’ x 3/8” (10mm) 5 22.81 0.89 10.25 11.5 13 994800 Double Loop Cable (4’ x 3/8”) & Weather Cover Padlock 5 7.75 0.6 11 9 10.5 994862 Double Loop Cable (15’ x 3/8”) & Weather Cover Padlock 5 15.15 0.88 12 10.75 11.75 999232 Extra Large Padlock 5 14.59 0.6 14 8.25 9 851226KA Round Body Solid Steel Padlock - 2” shackle 6 8.69 0.41 10.25 6.5 10.75 994831 Round Body Solid Steel Padlock 2pk Keyed Alike - 2” shackle 4 13.65 0.33 8.5 9.5 7 850465 Dial Combination Padlock 6 2.82 0.16 6 4.5 10.25 850410 Covered Laminated Padlock 2pk Keyed Alike - 1 1/2” (40mm) 6* 7.14 0.28 6.25 8 9.75 855156 Shackle-less Padlock 6 14.11 0.33 8.66 5.9 11.22 KS11A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4” shackle 6 5.08 0.05 2.76 7.76 3.94 KS11D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2” shackle 6 5.52 0.06 2.76 7.76 4.53 KS11F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2” shackle 6 5.52 0.06 2.76 7.76 5.00 KS11G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4” shackle 6 6.18 0.09 2.76 7.76 7.05 KS13A2300 Brass Padlock KNK Cylinder 3/4” shackle, KD 6 6.18 0.05 2.76 7.76 3.94 KS13D2300 Brass Padlock KNK Cylinder 1 1/2” shackle, KD 6 6.18 0.06 2.76 7.76 4.53 KS13F2300 Brass Padlock KNK Cylinder 2” shackle, KD 6 6.62 0.06 2.76 7.76 5.00 KS13G2300 Brass Padlock KNK Cylinder 4” shackle, KD 6 7.28 0.09 2.76 7.76 7.05 KS21A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4” shackle 6 5.52 0.05 2.76 7.76 3.94 KS21D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2” shackle 6 5.52 0.06 2.76 7.76 4.53 KS21F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2” shackle 6 5.52 0.06 2.76 7.76 5.00 KS21G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4” shackle 6 6.62 0.09 2.76 7.76 7.05 KS23A2300 Brass Padlock KNK Cylinder 3/4” shackle, KD 6 6.18 0.09 2.76 7.76 7.05 KS23D2300 Brass Padlock KNK Cylinder 1 1/2” shackle, KD 6 6.62 0.06 2.76 7.76 4.53 KS23F2300 Brass Padlock KNK Cylinder 2” shackle, KD 6 6.62 0.06 2.76 7.76 5.00 KS23G2300 Brass Padlock KNK Cylinder 4” shackle, KD 6 7.28 0.09 2.76 7.76 7.05 KS41A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4” shackle 6 6.18 0.09 2.76 7.76 7.05 KS41D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2” shackle 6 6.18 0.06 2.76 7.76 4.53 KS41F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2” shackle 6 6.62 0.06 2.76 7.76 5.00 KS41G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4” shackle 6 7.73 0.09 2.76 7.76 7.05 KS43A2300 Brass Padlock KNK Cylinder 3/4” shackle, KD 6 6.62 0.09 2.76 7.76 7.05 KS43A3200 Brass Padlock Full Size IC (Less Cylinder) 3/4” shackle 6 6.62 0.09 2.76 7.76 7.05 KS43D2300 Brass Padlock KNK Cylinder 1 1/2” shackle, KD 6 7.28 0.06 2.76 7.76 4.53 KS43D3200 Brass Padlock Full Size IC (Less Cylinder) 1 1/2” shackle 6 7.28 0.06 2.76 7.76 4.53 KS43F2300 Brass Padlock KNK Cylinder 2” shackle, KD 6 7.28 0.06 2.76 7.76 5.00 KS43F3200 Brass Padlock Full Size IC (Less Cylinder) 2” shackle 6 7.28 0.06 2.76 7.76 5.00 KS43G2300 Brass Padlock KNK Cylinder 4” shackle, KD 6 8.39 0.09 2.76 7.76 7.05 KS43G3200 Brass Padlock Full Size IC (Less Cylinder) 4” shackle 6 8.39 0.09 2.76 7.76 7.05 KS72F1200 Steel Padlock SFIC (Less Cylinder) 2” shackle 6 10.6 0.10 3.27 9.29 5.59 KS72F2300 Steel Padlock KNK Cylinder 2” shackle, KD 6 5.08 0.10 3.27 9.29 5.59 KS72F3200 Steel Padlock Full Size IC (Less Cylinder) 2” shackle 6 5.08 0.10 3.27 9.29 5.59 KS72M1200 Steel Padlock SFIC (Less Cylinder) 1” shackle 6 9.93 0.09 3.27 9.29 4.88 KS72M2200 Steel Padlock KNK (Less Cylinder) 1” shackle 6 9.93 0.09 3.27 9.29 4.88 KS72M3200 Steel Padlock Full Size IC (Less Cylinder) 1” shackle 6 9.93 0.09 3.27 9.29 4.88 KS72F2200 Steel Padlock KNK (Less Cylinder) 2” shackle 6 10.6 0.10 3.27 9.29 5.59 KS82M1200 Steel Padlock SFIC (Less Cylinder) 1” shackle 6 7.73 0.07 3.27 8.82 4.29 KS82M2200 Steel Padlock KNK (Less Cylinder) 1” shackle 6 7.73 0.07 3.27 8.82 4.29 KS92M1200 Steel Padlock SFIC (Less Cylinder) 1” shackle 6 9.93 0.07 3.27 8.82 4.29 KS92M2200 Steel Padlock KNK (Less Cylinder) 1” shackle 6 9.93 0.07 3.27 8.82 4.29 KS92M3200 Steel Padlock Full Size IC (Less Cylinder) 1” shackle 6 9.93 0.07 3.27 8.82 4.29 855101 Vehicle Hasp 3 10.04 0.43 10.38 8.5 8.5 855118 Flexible Steel Hasp 6 5.95 0.44 10.43 5.31 13.58 855125 Center Hole Hasp 6 8.82 0.52 9.45 5.31 17.91 855132 90 Degree Hasp 6 8.59 0.45 9.45 5.7 14.37 855149 Steel Bar Hasp - 7 1/4” 6 9.03 0.44 10.43 5.31 13.58 994848 Steel Bar Hasp - 4 1/2” 6 2.7 0.26 10 4.75 9.5

Freight Weight Chart • TERMS & CONDITIONSPortable Security

* Case is 6 each 2-packs.

Sec

urity

Cha

ins

Cab

leS

ecur

ity

Pad

lock

sH

asp

s

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-12

TERMS & CONDITIONS • Complete Locks

Product Warranties: Commercial Applications3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty

SchlageLockCompany,LLC(the“Company”)extendsathreeyearlimitedmechanicalwarrantyandoneyearlimitedelectromechanicalwarrantytotheoriginaluseroftheproductsmanufacturedbytheCompany(the“Products”)againstdefectsinmaterialandworkmanshipfromthedateofpurchase.CertainProducts contain restrictions to this limited warranty, additional warranties, or different warranty periods. Please see below for specific Product warranty information.What The Company Will Do: Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and encumbrances and accompanied by the statement of defects of proof of purchase, the Company will replace the Product.Original User: These warranties only apply to the Original User of Products. These warranties are not transferable.What Is Not Covered: Thefollowingcosts,expensesanddamagesarenotcoveredbytheprovisionsoftheselimitedwarranties:(i)laborcostsincluding,butnotlimitedto,suchcostsfortheremovalandreinstallationofProducts;(ii)shippingandfreightexpensesrequiredtoreturntheProductstotheCompany;or(iii)anyotherincidental,consequential,indirect,specialand/orpunitivedamages,whetherbasedoncontract,warranty,tort(including,butnotlimitedtostrict liabilityornegligence),patentinfringement,orotherwise,evenifadvisedofthepossibilityofsuchdamages.Somestatesdonotallowtheexclusionor limitationofincidentalorconsequentialdamages,sotheaboveexclusionorlimitationmaynotapplytoyou.The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature, humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not disclose to the Company’s satisfaction non-conformance to the warranties. Additionally, the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing.Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maxi-mum liability under these warranties is limited to the purchase price of the Product.NoactionarisingoutofanyclaimedbreachofthesewarrantiesbytheCompanymaybebroughtbytheOriginalUsermorethanone(1)yearafterthecauseofactionhasarisen.How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.SPECIFIC PRODUCT WARRANTY RESTRICTIONS/ADDITIONAL WARRANTIES:ND-Series Levers 10-Year Mechanical Warranty Thelimitedwarrantyisforaperiodofseven(7)yearsforproductshippedpriortoJanuary2012.10-yearforproductsshippedafterJanuary2012.Small Format Interchangeable Core (SFIC) Warranty ThelimitedwarrantyalsoappliestoSchlagelocksandhousingswhenusedwithanothermanufacturer’scores,ortoSchlagecores(i.e,SFIC)whenusedinanothermanufacturer’s locks and housings. The use of unauthorized cylinder cams or other components with the Products shall void these warranties.

Everest 29, Everest 29 Primus, Everest 29 Primus XP, Everest, Everest Primus, and Everest Primus XP Limited Lifetime Key Breakage Warranty Alimitedlifetimewarrantyisprovidedtotheoriginaluseragainstbreakageandissubjecttotherestrictionsoftheselimitedwarranties.Portable Security Limited Lifetime Warranty Alimitedlifetimewarrantyisprovidedtotheoriginaluserandissubjecttotherestrictionsoftheselimitedwarranties.

Exclusions:OilRubbedBronzefinish(613)isdesignedtoimproveovertimeandchangeinappearance,creatingalivingfinishthroughdailyuseandthus, finish discoloration is not applicable to the above warranty.

Product Warranties: Residential ApplicationsLifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty

Subjecttothetermsandconditionsofthiswarranty,Schlageextendsalifetimelimitedmechanicalandfinishwarrantyandaone-yearlimitedelectronics warrantytotheoriginalconsumeruser(“OriginalUser”)ofourSchlagebrandproduct(“Product”)againstdefectsinmaterialandworkmanship,aslongastheOriginal User occupies the residential premises upon which the Product was originally installed.

What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.

What is not covered:Thefollowingcosts,expensesanddamagesarenotcoveredbytheprovisionsofthislimitedWarranty:(i)laborcostsincluding,butnot limitedto,suchcostsastheremovalandreinstallationofProduct;(in)shippingandfreightexpensesrequiredtoreturnProducttoSchlage;and(iii)anyother incidental,consequential,indirect,specialand/orpunitivedamages,whetherbasedoncontract,warranty,tort(including,butnotlimitedto,strictliabilityor negligence),patentinfringement,orotherwise,evenifadvisedofthepossibilityofsuchdamages.Somelocallawsdonotallowtheexclusionorlimitationof incidentalorconsequentialdamages,sotheaboveexclusionorlimitationmaynotapplytoyou.

The provisions of this warranty do not apply to Products:(i)usedincommercialapplications;(ii)usedincommonareaapplications;(iii)usedforpurposesforwhichtheyarenotdesignedorintended;(iv)whichhavebeensubjectedtoalteration,abuse,misuse,negligenceoraccident;(v)whichhavebeenimproperlystored,installed,maintainedoroperated;(vi)whichhavebeenusedinviolationofwritteninstructionsprovidedbySchlage;(vii)whichhavebeensubjectedtoimpropertemperature,humidityorotherenvironmentalconditions;or(viii)which,basedonSchlage’sexamination,donotdisclosetoSchlage’ssatisfactionnon-conformancetothewarranty.Additionally,thiswarrantyDOESNOTCOVERscratches,abrasions,ordeteriorationduetotheuseofpaints,solventsorotherchemicals.

Exclusions:OilRubbedBronzefinish(613)isdesignedtoimproveovertimeandchangeinappearance,creatingalivingfinishthroughdailyuseandthus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connectionwiththeProduct.Schlage’smaximumliabilityhereunderislimitedtotheoriginalpurchasepriceoftheProduct.NoactionarisingoutofanyclaimedbreachofthiswarrantybySchlagemaybebroughtbytheOriginalUsermorethanone(1)yearafterthecauseofactionhasarisen.

How local law applies:Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightsasotherwisepermittedbylaw.IfthisProductis consideredaconsumerproduct,pleasebeadvisedthatsomelocallawsdonotallowlimitationsonincidentalorconsequentialdamagesorhowlonganimplied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty.

Terms-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Product Warranties, Additional Terms & Conditions: Commercial andResidential ApplicationsAdditional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximumliabilityunderthesewarrantiesislimitedtothepurchasepriceoftheProduct.NoactionarisingoutofanyclaimedbreachofthesewarrantiesbytheCompanymaybebroughtbytheOriginalUsermorethanone(1)yearafterthecauseofactionhasarisen.How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.

Note: Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advised that: (1)Somestatesdonotallowlimitationsorincidentalconsequentialdamagesorhowlonganimpliedwarrantylastssothattheabovelimitations maynotfullyapply;and(2)Thiswarrantygivesspecificlegalrightsandausermayhaveotherrightswhichmayvaryfromstatetostate.

For warranty service and shipping instructions contact:

Lifetime Mechanical Warranty and 5-year Finish Warranty

Subjecttothetermsandconditionsofthiswarranty,SchlageLockCompany(“Schlage”)extendsalifetimelimitedmechanicaland5-yearfinishwarrantytotheoriginalconsumeruser(“OriginalUser”)ofDexterbySchlageproducts(“Product”)againstdefectsinmaterialandworkmanship,aslongastheOriginalUser occupies the residential premises upon which the Product was originally installed.What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: Thefollowingcosts,expensesanddamagesarenotcoveredbytheprovisionsofthislimitedWarranty:(i)laborcostsincluding,butnot limitedto,suchcostsastheremovalandreinstallationofProduct;(in)shippingandfreightexpensesrequiredtoreturnProducttoSchlage;and(iii)anyother incidental,consequential,indirect,specialand/orpunitivedamages,whetherbasedoncontract,warranty,tort(including,butnotlimitedto,strictliabilityor negligence),patentinfringement,orotherwise,evenifadvisedofthepossibilityofsuchdamages.Somelocallawsdonotallowtheexclusionorlimitationof incidentalorconsequentialdamages,sotheaboveexclusionorlimitationmaynotapplytoyou.The provisions of this warranty do not apply to Products:(i)usedincommercialapplications;(ii)usedincommonareaapplications;(iii)usedforpurposesforwhichtheyarenotdesignedorintended;(iv)whichhavebeensubjectedtoalteration,abuse,misuse,negligenceoraccident;(v)whichhavebeenimproperlystored,installed,maintainedoroperated;(vi)whichhavebeenusedinviolationofwritteninstructionsprovidedbySchlage;(vii)whichhavebeensubjectedtoimpropertemperature,humidityorotherenvironmentalconditions;or(viii)which,basedonSchlage’sexamination,donotdisclosetoSchlage’ssatisfactionnon-conformancetothewarranty.Additionally,thiswarrantyDOESNOTCOVERscratches,abrasions,ordeteriorationduetotheuseofpaints,solventsorotherchemicals.

Product Warranties and Distribution Policy • TERMS & CONDITIONS

Schlage and Portable Security Commercial Customers

Schlage Customer Care3899HancockExpresswayColoradoSprings,CO80911

(877)671-7011Fax(800)452-0665

Schlage and Portable Security Residential and Retail Customers

SchlageCustomer Care2119EastKansasCityRoadOlathe,KS66061

(800)847-1864(option1)ConsumerFax(800)366-5625

The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on its products without notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage Lock Company is not responsible for any modification, addition or alteration to our products by others.

Distribution Function and Location Policy

The Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned by Schlage.ItisvitaltooursuccessandfortheeffectivemanagementofthedistributionofourproductsthattheSchlagecustomerrelationship,onceit is satisfactorily established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of one or more of Schlage products, a customer should continue to perform that distribution function from the location of its business at the place or places utilized at the time of selection. A customer should not change its Schlage distribution function or establish a different or additional location with-out the prior written consent of Schlage.

Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere to this policy. Schlage also reserves the right to change, in its sole discretion, the number and locations of the distributors authorized to distribute its products in any area. This determination will be based upon, among other considerations, the success or failure in developing the market for Schlage products.

Product Warranties: Residential Applications (Cont.)Guaranteed Fit Program:Schlageproductsaredesignedtofitstandardresidentialdoorpreparationsandretrofitexistingtubularlocks.Note:Mortiselocksandpreparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s perfor-mance,theOriginalUsermaysimplycontactSchlageCustomerServiceat888-805-9837intheU.S.andCanadaor800-506-7866inMexicoforassistance.

Program and warranty claims:IfyouencounteraresidentialdoorpreparationorfitissueundertheGuaranteedFitProgramorhaveaclaimunderthis warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-14

TERMS & CONDITIONS • Schlage Key Systems Sales Policy

Schlage Key Systems Sales PolicyDefinition-

StandardkeywaysareC,CE,E,EF,F,FG,G,H,J,K,L.Allotherkeywaysareconsideredrestricted.Everest,EverestPrimus,ClassicPrimusandallotherrestrictedkeywayproducts(Quad,Reversed,Numbered)manufacturedbytheSchlage Lock Company are offered for sale by policies set forth per product type and security levels through specific channels of distribu-tion. Possession of this price book or any other Schlage price book does not constitute “the right to purchase” these products. Please refer tothesalespolicybelowfortermsandcondition.Thetermkeyway(s)refer(s)tokeyway,keysectionsorsidebitmilling.

Standard Classic (Obverse) Key Sections- no restriction StandardkeywaysareClassic(Obverse)C,CE,E,EF,F,FG,G,H,J,K,L.

Everest and Everest 29 Open (C and S Key Sections)EverestandEverest29Open(C&Skeyways)includenon-PrimusproductswithEverestCandEverest29Skeywaysandkeysections.SchlageonlysellsEverestandEverest29Openproductstocommercialsecurityprofessionals.Commercialsecurityprofessionalspurchasing EverestandEverest29OpenproductsfromSchlagearepermittedtostockandtooriginateorduplicatekeyswithoutsignatureverification.

PurchasersofEverestandEverest29open(C&S)arepermittedtoreselltheproductsinaccordancewiththeirdistributionagreementtoend users and to other commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to:

i)Anyresidentialretailoutlet.ii)Anyindividualorentitypurchasingorsellingproductsthroughanymethodofauction.

EndUserKeyways-Primus/PrimusXPlevels3,4&9,EverestD,EverestB,Everest29T,Everest29R,Quad,Reversed, Numbered.End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or locksmith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter of authori-zation(LOA)orfacesheet(dependinguponthekeysystemtype).

End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every newendusersystem,usingtheserestrictedkeyways,requirespriorapprovalfromthelocalIngersollRandSecurityTechnologiessalesoffice management.

Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage accountasthetimeofthesale,unlessauthorizationhasbeengrantedinwritingbythelocalIngersollRandSecurityTechnologiessalesoffice management where the end user reside.

Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235, Everest 29 R234 & R235.Locksmith/dealerkeysectioncanbesoldtocommerciallocksmiths/dealersonly.

Righttostockandselllocksmiths/dealersrestrictedkeywaysrequirestheappropriatewrittenagreementwithSchlageandapprovalbythelocalIngersollRandSecurityTechnologysaleofficemanagement.PleasecontactyourlocalIngersollRandsaleofficeforacopyofthese contracts and additional information.

Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.

Terms-15Price Book 74Effective March 4, 2013 • Rev. 3/13

Restricted Keyway Policy • TERMS & CONDITIONS

Restricted Keyway PolicyEverest B, Everest 29 RAllEverestandEverest29SFIC(BandRFamilies)keywaysarerestricted.When ordering a new keying system, include the following: •Job(end-user)name,city,stateandzipcode. •LetterofAuthorization(LOA)–Authorizedship-toaddressforkeyblanks,coresandcutkeysonend-user’sofficialstationery. See Forms & Examples for sample letter of authorization. •Numericallydefinedspecificationsforexpansionofallbranchesofthekeysystem.

Thefactorywillassigna“facilitycode”whichwillappearonallkeysandblanksforthisjob.Whenorderingadditionstoanexisting keying system, include the following: •Job(end-user)name,city,stateandzipcode. •FacilitycodepreviouslyassignedbySchlageandstampedonallexistingkeysandblanks. •RegistrynumberofthekeyingsystemasestablishedbySchlage. •Letterofauthorizationonend-user’sofficialstationeryisrequiredwhen: - End-user places order with new dealer. - Order is to be drop shipped to a different ship-to address than originally authorized by the end-user. See Forms & Examples for sample letter of authorization.

Bittinglist(transcript)ordersrequirealetterofauthorizationontheend-user’sofficialstationery.Prevailingpricesapply.

Everest D, Everest 29 TAllEverestDandEverest29Tkeywaysarerestricted.When ordering a new keying system, include the following: •Job(end-user)name,city,stateandzipcode. •LetterofAuthorization(LOA)–Authorizedship-toaddressforallproductsonend-user’sofficialstationery.SeeForms & Examples for sample letter of authorization. •Numericallydefinedspecificationsforexpansionofallbranchesofthekeysystem.

Thefactorywillassigna“facilitycode”whichwillappearonallkeysandblanksforthisjob.Whenorderingadditionstoanexisting keying system, include the following: •Job(end-user)name,city,stateandzipcode. •FacilitycodepreviouslyassignedbySchlageandstampedonallexistingkeysandblanks. •RegistrynumberofthekeyingsystemasestablishedbySchlage. •Letterofauthorizationonend-user’sofficialstationeryisrequiredwhen: - End-user places order with new dealer. - Order is to be drop shipped to a different ship-to address than originally authorized by the end-user. See Forms & Examples for sample letter of authorization.

Quad,Numbered(“Paracentric”)andReverseKeywayFamilyPolicyAletterofauthorizationfromtheend-userisrequiredforallordersforrestrictedkeywayplugs,0-bittedand1-bittedproductsandallkeyblanks.Restrictedkeywayproductsarenotavailablekeyedrandom.Theletterofauthorizationmustindicatethequantity,productandkeyway,andbedatedwithsixmonthofrequestedorder.

Allowable End User Authorizations for Restricted Keyways:Theendusercanauthorizeadealerordistributortoorderandinventoryproductsiftheysochoose.Thisauthorizationrequiresthe submissionofafullycompleted“LetterofAuthorization”or“SignatureCard”,dependingontheproducttyperequirements,bytheenduser to Schlage.

Construction Core Program PolicyFull size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less thehandling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers may not deduct payment for construction cores prior to completion of their authorized return.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-16

TERMS & CONDITIONS • Cylinder PoliciesPrimus®/ Primus XP Sales PolicyPrimusHighSecuritycylinderproductsmanufacturedbytheSchlageLockCompanyareofferedforsalethroughspecificchannelsofdistribution,basedonstockingrequirementsandsecuritylevels.PossessionofthispricebookoranyotherSchlagepricebookdoesnotconstitute“therighttopurchase”Primusproducts.Important:Instockinglevelswherepurchaseagreementsarerequired,afullyexecutedpurchaseagreement,includinginitialminimuminventoryorder,mustbeinplacebeforeanyPrimusproductsmaybequotedorpurchased.ContactyourIngersollRandSecurityTechnologiesConsultantforspecificdetails.ThepricescontainedhereinapplytoPrimusLevels1through9withrespecttotheactualproduct.Availabilityofproductissubject to additional conditions as follows:

PRIMUS/PRIMUS XP LEVEL 1:ForretaillocksmithsandSchlagedealers.Standardnationwidesidebittingbykeyway.StockinglevelrequiresaseparatePrimusagreement.Initialbuy-inrequiredfordistributorsbutnotforparticipatinglocksmiths.Obversekeywaysonly.HP,JPandLPsectionkeys are not available.PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor.StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandaninitialminimuminventorypurchasebythewholesalerandthelocksmith.Obversekeywaysonly.HP,JPandLPsectionkeysarenotavailable.Cylindersarealwaysfurnishedlesskeyblanks(LKB).PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physi-callocationzip-code.DistributionthroughdirectSchlagedealers.StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandaninitialminimuminventorypurchase.Obversekeywaysonly.CylinderscanbeorderedLKB,KD,KAorMK.PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealerbytimezone.DistributionthroughdirectSchlagedealers.StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandan initial minimum inventory purchase. Obverse keyways only.PRIMUS/PRIMUS XP LEVEL 3:Enduserlevelnotstockedbydealers.Keysystemsareassignedasidebittingexclusivewithin2-digitzipcode(Level3G)forordersof60-1,999Primuscylinders.Ordersoffewerthan60Primuscylindersarerandomlyassignedasidebittingfrom asmallnationwidepoolofsidebittings(Level3U).DistributionthroughSchlagedealersandSchlagewholesaledistributors.ObverseandQuadkey-ways only. PRIMUS/PRIMUS XP LEVEL 4: Enduserlevelnotstockedbydealers.Keysystemsareassignedasidebittingexclusivewithinatimezone(Level4Z)forordersof2,000-3,999Primuscylinders.Anationwideexclusivesidebiting(Level4N)isassignedtokeysystemsof4,000ormorePrimuscylinders.Thisexclusivitycanbepurchasedforaseparatefeeforsmallerquantitiesofcylinders.Thispricebookdoesnotcontainthefeeschedule. Contact your IngersollRand Security & Safety Consultant for specific information. Distribution through Schlage dealers and Schlage wholesaledistributors.ObverseandQuadkeywaysonly.PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandaninitialminimuminventorypurchasebytheSchlagewholesalerandthelocksmith.SameasLevel1PLUSabove,butwithEverestSFamilykeywaysonly.PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealer physicallocationzip-code.DistributionthroughdirectSchlagedealers.StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandaninitialminimuminventorypurchase.AllEverest29keysections.CylinderscanbeorderedMK,KA,KDorLKB.PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealerbytimezone.DistributionthroughdirectSchlagedealers.StockinglevelwhichrequiresaseparatePrimuspurchaseagreementandan initialminimuminventorypurchase.EquivalenttoLevel2above,butwithEverestSFamilykeywaysonly.PRIMUS/PRIMUS XP LEVEL 9:Enduserlevelnotstockedbydealers.Keysystemsareassignedvaryingdegreesofgeographically exclusive side bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contact your IngersollRand Security & Safety Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Level9U,9G,9Z,and9NareequivalenttoLevels3U,3G,4Z,and4Nabove,butwithEverestSandTFamilykeyways.Thefollowingsidebitmillingexclusivitycriteriaapplytobothlevels3,4&9: • 1-60cylinders-Randomassignment • 61-1999cylinders-Firsttwodigitsofzip-code • 2000-3999cylinders-Time-ZoneExclusivity(alsoavailablefor$10,000feeforanorganizationwho wouldlikethisexclusivityanddoesn’tmeetcylindersquantityrequirement). • 4000+cylinders-NationWideExclusivity.(alsoavailablefor$40,000feeforanorganizationwhowould likethisexclusivityanddoesn’tmeetcylindersquantityrequirement).

Cla

ssic

Key

way

sE

vere

st® K

eyw

ays

Important Ordering InformationSeeForms&Examples:PrimusandEverest29PrimusOrderingChecklistforachecklistofinformationrequiredtoprocessaPrimusorder.Notethat,forsecurityreasons,allenduserPrimuslevels(Level3,4and9)requireaFacesheet(MS-E120)bearinganoriginalsignature.OpeningordersforenduserPrimuslevelsalsorequireaSignatureCard(MS-E130)bearingoriginalsignatures.Facesheetsandsignaturecardsareusedtoauthenticatetheenduserrequestforproduct,thereforeordersreceivedwithoutthecorrectsupportingdocuments(orwithoutoriginalsignatures)aresubjecttodelaysorcancellations. Blank Facesheets and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronic version of these forms are available at www.schlage.com.The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to our products by others.

Buy-in Requirements-Commercial Locksmiths Levels

Primus XP Everest29PrimusXPLevel1 None N/A N/ALevel1+ $7,500 Level7XP $7,500Level2 25,000 Level8 $25,000

Terms-17Price Book 74Effective March 4, 2013 • Rev. 3/13

Cylinder Policies • TERMS & CONDITIONS

1LEVEL

1+LEVEL

2LEVEL

3LEVEL

4LEVEL

7LEVEL

8LEVEL

9LEVEL

• Strip Mall Shops •

•

Small Businesses • Upscale Homes

• Small Businesses Restaurants

• Doctor's Offices

• Office Buildings • Banks • Private Schools • Healthcare Residences

• • • •

Educational Facilities Healthcare Facilities Large Office Complexes Government Buildings

• Detention Centers • Franchises

T ypical Applications National Non-Exclusive

Stocked by distributors and resold to end users via commercial locksmiths; All Level 1 Locksmiths have the same side bittings.

Dealer Exclusive

Owned and stocked by dealers then resold to end users. Keys bear a unique ID based upon time-zone exclusivity of side-bitting.

End User Exclusive

Exclusivity is based on either random assignment, on the first 2 digits of the zip code, on time zone, or on a nationwide basis, depending on end user commitment.

Dealer Exclusive Owned and stocked by dealers then resold to end users. Keys bear a unique ID based upon time-zone exclusivity of side-bitting.

End User Exclusive Exclusivity is based on either random assignment or on the first 2 digits of the zip code, depending on end user commitment.

End User Exclusive Exclusivity is based on either a time zone or nationwide basis, depending on end user commitment.

Consider Everest Open for Commercial Exclusivity

Dea

ler

Con

trol

led

Syst

ems

End

Use

r Ex

clus

ive

Dea

ler

Con

trol

led

Syst

ems

End

Use

r Ex

clus

ive

XP Dealer Exclusive

Owned and stocked by dealers then resold to end users. Keys bear unique ID based upon three digits zip-code exclusivity of side bitting.

Primus Wholesaler/Locksmith Exclusive

Locksmiths resell wholesaaler’s side bitting to end users; keys bear locksmith ID number.

XP Dealer Exclusive

Owned and stocked by dealers then resold to end users. Keys bear unique ID based upon three digits zip-code exclusivity of side bitting.

Primus Wholesaler/Locksmith Exclusive

Locksmiths resell wholesaaler’s side bitting to end users; keys bear locksmith ID number.

R

R

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-18

TERMS & CONDITIONS Door Labeling Policy,Master Key Shipment Policy, E-Bolt Sales Policy

Door Labeling Policy Non-Master Keyed OrdersDoorlabelingisNOTprovidedunlessthisserviceisspecificallyrequestedinwriting.Ifrequested: • Doornumber(andHeading,ifspecified)isprovidedonkeyedandkeylessproduct. • “To”and“From”descriptionisNOTprovided. • Leadtimeswillbeextendedatleast5additionalworkingdays

Master Keyed OrdersDoor Labeling is provided as standard. • Doornumber(andHeading,ifspecified)isprovidedonkeyedandkeylessproduct. • “To”and“From”descriptionisNOTprovided.

EXCEPTION:DoorlabelingisnotprovidedonordersspecifyingResidentialMasterKeying(RMK)and/orResidentialConstructionKeying(RCK).Ifdoorlabelingisrequired,ContractMasterKeyingand/orContractConstructionKeyingchargeswillapply.

Master Key Shipment PolicyUnlessotherwiserequestedonthepurchaseorder,masterkeysandspecialfunctionkeysfurnishedonmasterkeyedorders(i.e.controlkeys,emergencykeys,constructionkeys,extractortools,lockoutkeys,etc.)arepackedseparatefromthebalanceoftheorderandshippedto the location specified on the order as follows:

Schlage Commercial products (excluding Portable Security) DefaultkeywayisEverest29S123 For other optional keyways, please specify

Schlage Electronics DefaultkeywayisEverest29S123 For other optional keyways, please specify

Portable Security - Kryptonite: defaulttoCkeywayKD For made to order products, please specify the keying and keyway

Schlage Residential: (F, B60, Dexter) Default keyway is C

All goods are shipped F.O.B. factory and become the customer’s property when they pass into the hands of the transportation company. Schlage reserves the right to use our choice of carrier.

Keyway Family of Master Key System

• ClassicRestricted(Numbered,QuadandReverse)• ClassicPrimus(ObverseandQuad)• EverestRestricted(BandDFamily)• Everest29Restricted(RandTFamily)• EverestPrimus(CandDFamily)• Everest29PrimusandPrimusXP(SandTFamily)• ClassicOpen(Obverse)• EverestOpen(CFamily)• Everest29Open(SFamily)

Standard Method of Shipment2-Day Air• Trackingnumberisassignedtoshipment• Recipient’ssignatureisrequiredupondelivery

Schlage Default Keyways

Terms-19Price Book 74Effective March 4, 2013 • Rev. 3/13

Hardware Finishes • TERMS & CONDITIONS

Hardware Finishes:SchlageLockfinishesaredurable,topqualityfinishesobtainedbythecarefulprocessingofsolidbrass,bronze,stainlesssteelorothermaterials.Whererequired,aprotectiveclearcoatingisappliedandcuredunderhightemperature.Itisimportantthatclimaticconditionsandusagebetakenunderconsiderationwhenselectingfinishes.Thisisespeciallytrueinareassubjectedtostrongcorrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity andpreservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organicfinishingapplicationsmayrequiredifferentmethodsofcleaningandcare.Asanexample,non-clearcoatedfinishesshouldnotbecleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap andbuffedlightlywithacleancloth.Thetypeofbasemetalandfinishingtechniquesmustbeconsideredwhenapplyinganycleaningor preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.

Insomeinstances,forcustomerconvenience,themostappropriateBHMAfinishsymbolsareusedtoindicatesimilarityofappearance,regardlessofbasemetaloffinishingprocess.A,AL,CS,D,ND,F,FA,H,S,S200-SeriesandDexterbySchlageleversarezinc-basedmaterialandareplatedtomatchfinishesindicated.L-Serieswillutilizeabrassmaterialfor612and613finishes.Finishesoflatches,strikes,cylinders/cores,andvisiblemountingscrews,thoughsimilarinappearance,maydifferfromthefinishofthetrim.Finishnumbersinthe600-SeriesaretheBHMA(BuildersHardwareManufacturersAssociation)industrystandard.

Commerical Finish Codes and Descriptions:ThenearestoldU.S.equivalentcodedesignationsareshowninparenthesis().

Symbol Description 605(3) BRIGHTBRASS,ClearCoated 606(4) SATINBRASS,ClearCoated609(5) ANTIQUEBRASS,SatinBrass,Blackened, Satin Relieved, Clear Coated 612(10) SATINBRONZE,ClearCoated613*(10B) OILRUBBEDBRONZE,OxidizedSatin Bronze,OilRubbed,NoCoating 619(15) SATINNICKEL,SatinNickelPlated, Clear Coated

* Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.

Symbol Description625(26) BRIGHTCHROMIUMPLATED,NoCoating626(26D) SATINCHROMIUMPLATED,NoCoating629(32) BRIGHTSTAINLESSSTEEL,NoCoating630(32D) SATINSTAINLESSSTEEL,NoCoating643e AGEDBRONZE,ClearCoated

Price Book 74Effective March 4, 2013 • Rev. 3/13

Terms-20

TERMS & CONDITIONS Notes

Numerics21415 � � � � � � � � � �Tool-7820406 � � � � � � � � �PS-13850410 � � � � � � � � �PS-12855101 � � � � � � � � �PS-14855118 � � � � � � � � �PS-14855125 � � � � � � � � �PS-14855132 � � � � � � � � �PS-14855149 � � � � � � � � �PS-14855156 � � � � � � � � �PS-12994800 � � � � � � � � �PS-13994848 � � � � � � � � �PS-14994862 � � � � � � � � �PS-13995418 � � � � � � � � �PS-12996958 � � � � � � � � �PS-11996965 � � � � � � � � �PS-11996972 � � � � � � � � �PS-11997665 � � � � � � � � �PS-11997771 � � � � � � � � �PS-11997795 � � � � � � � � �PS-11997801 � � � � � � � � �PS-11997894 � � � � � � � � �PS-11998136 � � � � � � � � �PS-11998143 � � � � � � � � �PS-11998150 � � � � � � � � �PS-11998167 � � � � � � � � �PS-11998174 � � � � � � � � �PS-11998198 � � � � � � � � �PS-11998228 � � � � � � � � �PS-11998235 � � � � � � � � �PS-11998242 � � � � � � � � �PS-11998273 � � � � � � � � �PS-11998280 � � � � � � � � �PS-11998297 � � � � � � � � �PS-11998327 � � � � � � � � �PS-11998334 � � � � � � � � �PS-11998341 � � � � � � � � �PS-11998358 � � � � � � � � �PS-11998365 � � � � � � � � �PS-11998372 � � � � � � � � �PS-11998389 � � � � � � � � �PS-11998396 � � � � � � � � �PS-11998402 � � � � � � � � �PS-11998419 � � � � � � � � �PS-11998426 � � � � � � � � �PS-11998433 � � � � � � � � �PS-11998440 � � � � � � � � �PS-11999201 � � � � � � � � �PS-13999218 � � � � � � � � �PS-13999225 � � � � � � � � �PS-13999232 � � � � � � � � �PS-12999249 � � � � � � � � �PS-13999256 � � � � � � � � �PS-13999263 � � � � � � � � �PS-13999270 � � � � � � � � �PS-13999461 � � � � � � � � �PS-4, PS-13999478 � � � � � � � � �PS-4, PS-1323446339 � � � � � � �CYL-4223446347 � � � � � � �CYL-4323538077 � � � � � � �CYL-1423538085 � � � � � � �CYL-9, CYL-1446929456 � � � � � � �CYL-43

006-224 � � � � � � � � �CS210-701-001 � � � � � � � � � �A-7, H-901-002 � � � � � � � � � �A-701-008 � � � � � � � � � �A-7, H-901-009 � � � � � � � � � �A-7, H-901-018 � � � � � � � � � �A-7, H-901-026 � � � � � � � � � �A-7, H-901-053 � � � � � � � � � �A-7, H-901-054 � � � � � � � � � �A-7, H-901-055 � � � � � � � � � �A-1101-056 � � � � � � � � � �A-1101-057 � � � � � � � � � �A-1101-058 � � � � � � � � � �A-1101-060 � � � � � � � � � �A-11, H-1301-063 � � � � � � � � � �A-11, H-1301-081 � � � � � � � � � �H-901-126 � � � � � � � � � �AL-802-037 � � � � � � � � � �CYL-2003-000 � � � � � � � � � �ND-1203-030 � � � � � � � � � �ND-1203-031 � � � � � � � � � �ND-1203-032 � � � � � � � � � �ND-1203-042 � � � � � � � � � �ND-1203-044 � � � � � � � � � �ND-1403-055 � � � � � � � � � �ND-1403-066 � � � � � � � � � �ND-14030730-001 � � � � � �CYL-39030730-002 � � � � � �CYL-3903-077 � � � � � � � � � �ND-1404-001 � � � � � � � � � �D-804-002 � � � � � � � � � �D-804-006 � � � � � � � � � �D-804-007 � � � � � � � � � �D-804-020 � � � � � � � � � �D-1204-021 � � � � � � � � � �D-1204-022 � � � � � � � � � �D-1204-023 � � � � � � � � � �D-1204-025 � � � � � � � � � �D-1204-026 � � � � � � � � � �D-1204-030 � � � � � � � � � �D-804-031 � � � � � � � � � �D-804-032 � � � � � � � � � �D-1004-033 � � � � � � � � � �D-804-034 � � � � � � � � � �D-804-060 � � � � � � � � � �AL-806-231 � � � � � � � � � �CS210-707-035 � � � � � � � � � �H-907-057 � � � � � � � � � �H-908-000 � � � � � � � � � �S200-1208-020 � � � � � � � � � �S-7, S200-808-021 � � � � � � � � � �S-708-027 � � � � � � � � � �S-7, S200-808-030 � � � � � � � � � �S-7, S200-808-032 � � � � � � � � � �S200-808-033 � � � � � � � � � �S200-1208-034 � � � � � � � � � �S200-908-035 � � � � � � � � � �S200-909-019 � � � � � � � � � �CYL-609-155 � � � � � � � � � �L-4009-156 � � � � � � � � � �L-4009-157 � � � � � � � � � �L-4009-158 � � � � � � � � � �L-40

09-159 � � � � � � � � � �L-4009-195 � � � � � � � � � �CYL-609-196 � � � � � � � � � �CYL-609-197 � � � � � � � � � �CYL-609-198 � � � � � � � � � �CYL-609-199 � � � � � � � � � �CYL-609-200 � � � � � � � � � �CYL-609-401 � � � � � � � � � �L-3209-402 � � � � � � � � � �L-3209-403 � � � � � � � � � �L-3209-404 � � � � � � � � � �L-3209-409 � � � � � � � � � �CYL-509-410 � � � � � � � � � �CYL-509-411 � � � � � � � � � �CYL-509-412 � � � � � � � � � �CYL-509-416 � � � � � � � � � �CYL-609-418 � � � � � � � � � �CYL-609-446 � � � � � � � � � �L-2909-447 � � � � � � � � � �L-2909-449 � � � � � � � � � �L-2909-451 � � � � � � � � � �L-2909-454 � � � � � � � � � �L-2909-455 � � � � � � � � � �L-2909-456 � � � � � � � � � �L-2909-473 � � � � � � � � � �L-3009-474 � � � � � � � � � �L-3009-475 � � � � � � � � � �L-3009-477 � � � � � � � � � �L-3009-483 � � � � � � � � � �L-3109-484 � � � � � � � � � �L-3009-485 � � � � � � � � � �L-3009-488 � � � � � � � � � �L-3109-493 � � � � � � � � � �L-3109-494 � � � � � � � � � �L-3009-506 � � � � � � � � � �L-3409-508 � � � � � � � � � �L-3209-509 � � � � � � � � � �L-3609-550 � � � � � � � � � �L-3409-551 � � � � � � � � � �L-3409-552 � � � � � � � � � �L-3409-553 � � � � � � � � � �L-3409-554 � � � � � � � � � �L-3409-555 � � � � � � � � � �L-3409-611 � � � � � � � � � �L-3609-632 � � � � � � � � � �L-3309-633 � � � � � � � � � �L-3309-634 � � � � � � � � � �L-3309-635 � � � � � � � � � �L-3309-636 � � � � � � � � � �L-3309-637 � � � � � � � � � �L-3309-638 � � � � � � � � � �L-3309-639 � � � � � � � � � �L-3309-640 � � � � � � � � � �L-3309-641 � � � � � � � � � �L-3309-655 � � � � � � � � � �L-3409-661 � � � � � � � � � �L-20, L-3409-662 � � � � � � � � � �L-20, L-3409-663 � � � � � � � � � �L-20, L-3409-664 � � � � � � � � � �L-20, L-3409-665 � � � � � � � � � �L-20, L-3409-666 � � � � � � � � � �L-20, L-3409-667 � � � � � � � � � �L-20, L-34

Index

Index-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

09-668 � � � � � � � � � �L-20, L-3409-669 � � � � � � � � � �L-20, L-3409-670 � � � � � � � � � �L-20, L-3409-671 � � � � � � � � � �L-20, L-3409-672 � � � � � � � � � �L-20, L-3409-713 � � � � � � � � � �L-20, L-3409-717 � � � � � � � � � �L-3409-751 � � � � � � � � � �CYL-509-752 � � � � � � � � � �CYL-509-753 � � � � � � � � � �CYL-509-754 � � � � � � � � � �CYL-509-756 � � � � � � � � � �CYL-609-757 � � � � � � � � � �CYL-609-764 � � � � � � � � � �CYL-509-765 � � � � � � � � � �CYL-509-766 � � � � � � � � � �CYL-509-767 � � � � � � � � � �CYL-509-774 � � � � � � � � � �ND-12, CYL-4309-833 � � � � � � � � � �CYL-509-834 � � � � � � � � � �CYL-509-835 � � � � � � � � � �CYL-509-836 � � � � � � � � � �CYL-509-900 � � � � � � � � � �L-3609-904 � � � � � � � � � �L-3609-905 � � � � � � � � � �L-3609-907 � � � � � � � � � �L-3609-992 � � � � � � � � � �CYL-5509-993 � � � � � � � � � �CYL-5509-994 � � � � � � � � � �CYL-5509-995 � � � � � � � � � �CYL-5509-996 � � � � � � � � � �CYL-5509-997 � � � � � � � � � �CYL-5509-998 � � � � � � � � � �CYL-5510-001 � � � � � � � � � �A-4, A-8, AL-4,

AL-9, B250-4, B250-7, CS210-5, CS210-9, H-5, H-11, S-4, S-9, S200-5, S200-11

10-004 � � � � � � � � � �A-4, A-8, AL-4, AL-9, B250-4, B250-7, H-5, H-11, S-4, S-9

10-013 � � � � � � � � � �ND-6, ND-13, D-5, D-9

10-016 � � � � � � � � � �ND-6, ND-13, D-5, D-9

10-025 � � � � � � � � � �ND-6, ND-13, A-4, A-8, AL-4, AL-9, B250-4, B250-7, D-5, D-9, S-4, S-9

10-026 � � � � � � � � � �A-4, A-8, AL-4, AL-9, CS210-5, CS210-9, H-5, H-11, S-4, S-9, S200-5, S200-11

10-027 � � � � � � � � � �A-4, A-8, AL-4, AL-9, CS210-5, CS210-9, H-5, H-11, S-4, S-9, S200-5, S200-11

10-042 � � � � � � � � � �ND-13, A-8, AL-9, B250-7, D-9, S-9

10-055 � � � � � � � � � �H-5, H-1110-058 � � � � � � � � � �A-4, A-8, AL-4,

AL-9, CS210-5, CS210-9, H-5, H-11, S200-5, S200-11

10-064 � � � � � � � � � �B500-4, B500-9, B600-5, B600-9, CS210-5, CS210-9, H-5, H-11, S200-5, S200-11

10-072 � � � � � � � � � �L-20, L-3510-073 � � � � � � � � � �L-20, L-3510-075 � � � � � � � � � �L-20, L-3510-078 � � � � � � � � � �L-21, L-3510-079 � � � � � � � � � �L-21, L-3510-087 � � � � � � � � � �B500-4, B500-9,

B600-5, B600-910-091 � � � � � � � � � �L-3510-092 � � � � � � � � � �B500-4, B500-9,

B600-5, B600-9, CS210-5, CS210-9, H-5, H-11, S200-5, S200-11

10-094 � � � � � � � � � �B500-4, B500-9, B600-5, B600-9, CS210-5, CS210-9, S200-5, S200-11

10-095 � � � � � � � � � �B500-4, B500-9, B600-5, B600-9, CS210-5, CS210-9, H-5, H-11, S200-5, S200-11

10-103 � � � � � � � � � �B500-4, B500-9, B600-5, B600-9

10-104 � � � � � � � � � �B500-4, B500-9, B600-5, B600-9

10-108 � � � � � � � � � �B500-4, B500-910-109 � � � � � � � � � �CS210-9, S200-5,

S200-1110-110 � � � � � � � � � �CS210-9, S200-5,

S200-1110-111 � � � � � � � � � �CS210-9, S200-5,

S200-1110-112 � � � � � � � � � �B500-9, B600-9,

CS210-9, S200-1110-121 � � � � � � � � � �CS210-510-122 � � � � � � � � � �CS210-510-123 � � � � � � � � � �CS210-510-124 � � � � � � � � � �CS210-510-250 � � � � � � � � � �H-5, H-1110-251 � � � � � � � � � �CS210-9, H-5,

H-11, S200-5, S200-11

10-252 � � � � � � � � � �H-5, H-1110-253 � � � � � � � � � �CS210-9, H-5,

H-11, S200-5, S200-11

10-255 � � � � � � � � � �H-5, H-11

10-256 � � � � � � � � � �CS210-9, H-5, H-11, S200-5, S200-11

10-257 � � � � � � � � � �CS210-9, H-5, H-11, S200-5, S200-11

10-258 � � � � � � � � � �CS210-9, H-5, H-11, S200-5, S200-11

10-259 � � � � � � � � � �CS210-9, H-5, H-11, S200-5, S200-11

11-068 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-069 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-085 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-088 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-091 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-092 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-096 � � � � � � � � � �A-4, A-8, AL-4, AL-9

11-103 � � � � � � � � � �A-4, A-8, AL-4, AL-9

11-104 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-105 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-110 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-111 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-112 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-113 � � � � � � � � � �A-4, A-8, AL-4, AL-9, H-4, H-10

11-116 � � � � � � � � � �A-4, A-8, AL-4, AL-9

11-118 � � � � � � � � � �A-4, A-8, AL-4, AL-9

12-100 � � � � � � � � � �B250-4, B250-712-103 � � � � � � � � � �B250-4, B250-712-287 � � � � � � � � � �B500-4, B500-812-288 � � � � � � � � � �B500-4, B500-8,

CS210-8, S200-4, S200-10

12-289 � � � � � � � � � �B500-4, B500-8, CS210-8, S200-4, S200-10

12-290 � � � � � � � � � �B500-4, B500-812-291 � � � � � � � � � �B500-4, B500-8,

CS210-8, S200-4, S200-10

12-294 � � � � � � � � � �B500-412-297 � � � � � � � � � �B600-5, B600-812-317 � � � � � � � � � �B600-5, B600-812-339 � � � � � � � � � �CS210-812-617 � � � � � � � � � �B600-8

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-2

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

12-618 � � � � � � � � � �B600-812-625 � � � � � � � � � �B600-812-626 � � � � � � � � � �B500-8, B600-812-627 � � � � � � � � � �B600-912-628 � � � � � � � � � �B600-912-630 � � � � � � � � � �B600-5, B600-812-631 � � � � � � � � � �B600-5, B600-812-632 � � � � � � � � � �B600-5, B600-812-633 � � � � � � � � � �B500-4, B500-8,

B600-5, B600-8, CS210-8, S200-4, S200-10

12-640 � � � � � � � � � �B600-5, B600-812-641 � � � � � � � � � �B600-5, B600-812-642 � � � � � � � � � �B600-5, B600-812-643 � � � � � � � � � �B600-5, B600-812-650 � � � � � � � � � �B600-912-651 � � � � � � � � � �B600-912-652 � � � � � � � � � �B600-912-653 � � � � � � � � � �B600-913-047 � � � � � � � � � �ND-6, ND-1313-048 � � � � � � � � � �ND-6, ND-1314-001 � � � � � � � � � �D-5, D-914-010 � � � � � � � � � �ND-6, ND-13,

D-5, D-914-019 � � � � � � � � � �D-5, D-914-028 � � � � � � � � � �ND-6, ND-13,

D-5, D-914-042 � � � � � � � � � �ND-6, ND-13,

D-5, D-914-047 � � � � � � � � � �ND-6, ND-13,

D-5, D-914-048 � � � � � � � � � �ND-6, ND-13,

D-5, D-916-132 � � � � � � � � � �CS210-8, S-4, S-9,

S200-4, S200-1016-203 � � � � � � � � � �S-4, S-916-204 � � � � � � � � � �CS210-8, S-4, S-9,

S200-4, S200-1016-228 � � � � � � � � � �CS210-8, S200-4,

S200-1016-480 � � � � � � � � � �CS210-8, S200-4,

S200-1016-481 � � � � � � � � � �S200-1016-482 � � � � � � � � � �S200-1016-483 � � � � � � � � � �S200-1016-484 � � � � � � � � � �S200-1019-055 � � � � � � � � � �H-1019-056 � � � � � � � � � �H-1019-057 � � � � � � � � � �H-1019-058 � � � � � � � � � �H-1019-059 � � � � � � � � � �H-1019-060 � � � � � � � � � �H-1019-061 � � � � � � � � � �H-1019-062 � � � � � � � � � �H-1019-063 � � � � � � � � � �H-1019-064 � � � � � � � � � �H-1019-065 � � � � � � � � � �H-1019-066 � � � � � � � � � �H-1019-067 � � � � � � � � � �H-1019-068 � � � � � � � � � �H-1019-069 � � � � � � � � � �H-10

19-070 � � � � � � � � � �H-1020-001 � � � � � � � � � �CYL-28, CYL-3620-002 � � � � � � � � � �CYL-2820-009 � � � � � � � � � �CYL-4620-013 � � � � � � � � � �CYL-2920-021 � � � � � � � � � �CYL-4020-022 � � � � � � � � � �CYL-4020-057 � � � � � � � � � �CYL-4120-059 � � � � � � � � � �CYL-3220-060 � � � � � � � � � �CYL-3320-061 � � � � � � � � � �CYL-3220-062 � � � � � � � � � �CYL-3320-071 � � � � � � � � � �CYL-1620-071-XP � � � � � � �CYL-1620-072 � � � � � � � � � �CYL-1620-072-XP � � � � � � �CYL-1620-079 � � � � � � � � � �CYL-4120-090 � � � � � � � � � �CYL-3320-091 � � � � � � � � � �CYL-3320-188 � � � � � � � � � �CYL-1620-188-XP � � � � � � �CYL-1620-189 � � � � � � � � � �CYL-1620-189-XP � � � � � � �CYL-1620-190 � � � � � � � � � �CYL-1620-190-XP � � � � � � �CYL-1620-191 � � � � � � � � � �CYL-1620-191-XP � � � � � � �CYL-1620-200 � � � � � � � � � �CYL-720-201 � � � � � � � � � �CYL-720-202 � � � � � � � � � �CYL-720-203 � � � � � � � � � �CYL-720-204 � � � � � � � � � �CYL-720-205 � � � � � � � � � �CYL-720-206 � � � � � � � � � �CYL-720-207 � � � � � � � � � �CYL-720-208 � � � � � � � � � �CYL-720-209 � � � � � � � � � �CYL-720-210 � � � � � � � � � �CYL-720-211 � � � � � � � � � �CYL-720-212 � � � � � � � � � �CYL-720-213 � � � � � � � � � �CYL-720-214 � � � � � � � � � �CYL-720-215 � � � � � � � � � �CYL-720-216 � � � � � � � � � �CYL-720-217 � � � � � � � � � �CYL-720-218 � � � � � � � � � �CYL-720-219 � � � � � � � � � �CYL-720-220 � � � � � � � � � �CYL-720-221 � � � � � � � � � �CYL-720-222 � � � � � � � � � �CYL-720-223 � � � � � � � � � �CYL-720-224 � � � � � � � � � �CYL-720-225 � � � � � � � � � �CYL-720-226 � � � � � � � � � �CYL-720-227 � � � � � � � � � �CYL-720-228 � � � � � � � � � �CYL-720-229 � � � � � � � � � �CYL-720-500 � � � � � � � � � �CYL-2820-500-XP � � � � � � �CYL-2820-501 � � � � � � � � � �CYL-2820-501-XP � � � � � � �CYL-2820-505 � � � � � � � � � �CYL-46

20-505-XP � � � � � � �CYL-4620-506 � � � � � � � � � �CYL-2920-506-XP � � � � � � �CYL-2920-508 � � � � � � � � � �CYL-2920-508-XP � � � � � � �CYL-2920-509 � � � � � � � � � �CYL-4020-509-XP � � � � � � �CYL-4020-510 � � � � � � � � � �CYL-4020-510-XP � � � � � � �CYL-4020-515 � � � � � � � � � �CYL-2820-515-XP � � � � � � �CYL-2820-516 � � � � � � � � � �CYL-4020-516-XP � � � � � � �CYL-4020-517 � � � � � � � � � �CYL-2820-517-XP � � � � � � �CYL-2820-518 � � � � � � � � � �CYL-2920-518-XP � � � � � � �CYL-2920-529 � � � � � � � � � �CYL-1820-529-XP � � � � � � �CYL-1820-530 � � � � � � � � � �CYL-1820-530-XP � � � � � � �CYL-1820-531 � � � � � � � � � �CYL-1820-531-XP � � � � � � �CYL-1820-545 � � � � � � � � � �CYL-1620-545-XP � � � � � � �CYL-1620-546 � � � � � � � � � �CYL-1620-546-XP � � � � � � �CYL-1620-587 � � � � � � � � � �CYL-2820-587-XP � � � � � � �CYL-2820-589 � � � � � � � � � �CYL-3020-589-XP � � � � � � �CYL-3020-593 � � � � � � � � � �CYL-2820-593-XP � � � � � � �CYL-2820-700 � � � � � � � � � �CYL-2820-700-XP � � � � � � �CYL-2820-701 � � � � � � � � � �CYL-2820-701-XP � � � � � � �CYL-2820-705 � � � � � � � � � �CYL-4620-705-XP � � � � � � �CYL-4620-706 � � � � � � � � � �CYL-2920-706-XP � � � � � � �CYL-2920-708 � � � � � � � � � �CYL-2920-708-XP � � � � � � �CYL-2920-709 � � � � � � � � � �CYL-4020-709-XP � � � � � � �CYL-4020-710 � � � � � � � � � �CYL-4020-710-XP � � � � � � �CYL-4020-715 � � � � � � � � � �CYL-2820-715-XP � � � � � � �CYL-2820-716 � � � � � � � � � �CYL-4020-716-XP � � � � � � �CYL-4020-717 � � � � � � � � � �CYL-2820-717-XP � � � � � � �CYL-2820-718 � � � � � � � � � �CYL-2920-718-XP � � � � � � �CYL-2920-722 � � � � � � � � � �CYL-3320-722-XP � � � � � � �CYL-3320-729 � � � � � � � � � �CYL-1820-729-XP � � � � � � �CYL-1820-730 � � � � � � � � � �CYL-1820-730-XP � � � � � � �CYL-1820-731 � � � � � � � � � �CYL-18

Index

Index-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

20-731-XP � � � � � � �CYL-1820-740 � � � � � � � � � �CYL-4220-740-XP � � � � � � �CYL-4220-741 � � � � � � � � � �CYL-4220-741-XP � � � � � � �CYL-4220-745 � � � � � � � � � �CYL-1620-745-XP � � � � � � �CYL-1620-746 � � � � � � � � � �CYL-1620-746-XP � � � � � � �CYL-1620-757 � � � � � � � � � �CYL-4120-757-XP � � � � � � �CYL-4120-763 � � � � � � � � � �CYL-3220-763-XP � � � � � � �CYL-3220-766 � � � � � � � � � �CYL-3320-766-XP � � � � � � �CYL-3320-771 � � � � � � � � � �CYL-3220-771-XP � � � � � � �CYL-3220-776 � � � � � � � � � �CYL-3220-776-XP � � � � � � �CYL-3220-782 � � � � � � � � � �CYL-3220-782-XP � � � � � � �CYL-3220-783 � � � � � � � � � �CYL-3220-783-XP � � � � � � �CYL-3220-785 � � � � � � � � � �CYL-1920-787 � � � � � � � � � �CYL-2820-787-XP � � � � � � �CYL-2820-789 � � � � � � � � � �CYL-3020-789-XP � � � � � � �CYL-3020-793 � � � � � � � � � �CYL-2820-793-XP � � � � � � �CYL-2820-798 � � � � � � � � � �CYL-3220-798-XP � � � � � � �CYL-3222-001 � � � � � � � � � �CYL-1822-002 � � � � � � � � � �CYL-1822-003 � � � � � � � � � �CYL-1622-004 � � � � � � � � � �CYL-1622-017 � � � � � � � � � �CYL-1822-018 � � � � � � � � � �CYL-1822-019 � � � � � � � � � �CYL-1822-020 � � � � � � � � � �CYL-1822-061 � � � � � � � � � �CYL-1922-062 � � � � � � � � � �CYL-1922-069 � � � � � � � � � �CYL-1622-081 � � � � � � � � � �CYL-1822-082 � � � � � � � � � �CYL-1822-645 � � � � � � � � � �CYL-1622-646 � � � � � � � � � �CYL-1623-030 � � � � � � � � � �CYL-4223-030-ICX � � � � � �Keys-1423-031 � � � � � � � � � �CYL-4223-037 � � � � � � � � � �CYL-2223-038 � � � � � � � � � �CYL-2223-039 � � � � � � � � � �CYL-2223-040 � � � � � � � � � �CYL-2223-041 � � � � � � � � � �CYL-2223-042 � � � � � � � � � �CYL-2223-045 � � � � � � � � � �CYL-2223-065 � � � � � � � � � �CYL-1124-567 � � � � � � � � � �CYL-3024-567-XP � � � � � � �CYL-3024-569 � � � � � � � � � �CYL-18

24-569-XP � � � � � � �CYL-1824-570 � � � � � � � � � �CYL-1824-570-XP � � � � � � �CYL-1824-767 � � � � � � � � � �CYL-3024-767-XP � � � � � � �CYL-3024-769 � � � � � � � � � �CYL-1824-769-XP � � � � � � �CYL-1824-770 � � � � � � � � � �CYL-1824-770-XP � � � � � � �CYL-1825-019 � � � � � � � � � �CYL-2226-021 � � � � � � � � � �CYL-28, CYL-3626-023 � � � � � � � � � �CYL-30, CYL-3626-064 � � � � � � � � � �CYL-3226-072 � � � � � � � � � �CYL-2926-073 � � � � � � � � � �CYL-2926-091 � � � � � � � � � �CYL-3226-094 � � � � � � � � � �CYL-3226-098 � � � � � � � � � �CYL-3330-001 � � � � � � � � � �CYL-28, CYL-3630-002 � � � � � � � � � �CYL-28, CYL-3630-004 � � � � � � � � � �CYL-30, CYL-3630-005 � � � � � � � � � �CYL-30, CYL-3630-007 � � � � � � � � � �CYL-3230-008 � � � � � � � � � �CYL-3230-010 � � � � � � � � � �CYL-3230-016 � � � � � � � � � �CYL-3230-021 � � � � � � � � � �CYL-28, CYL-3630-022 � � � � � � � � � �CYL-28, CYL-3630-030 � � � � � � � � � �CYL-3230-032 � � � � � � � � � �CYL-3230-120 � � � � � � � � � �CYL-4230-121 � � � � � � � � � �CYL-4230-137 � � � � � � � � � �CYL-3230-138 � � � � � � � � � �CYL-3230-140 � � � � � � � � � �CYL-3233-005 � � � � � � � � � �CYL-8, CYL-5333-005-R1 � � � � � � �CYL-5633-007 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-058 � � � � � � � � � �CYL-5333-059 � � � � � � � � � �CYL-5333-059-149 � � � � � �CYL-5333-059-R1 � � � � � � �CYL-5633-059-R1-149 � � �CYL-5633-060 � � � � � � � � � �CYL-44, CYL-5333-065 � � � � � � � � � �CYL-5333-065-R1 � � � � � � �CYL-5633-080 � � � � � � � � � �CYL-44, CYL-5333-081 � � � � � � � � � �CYL-44, CYL-5333-085 � � � � � � � � � �CYL-5633-086 � � � � � � � � � �CYL-5633-087 � � � � � � � � � �CYL-5633-088 � � � � � � � � � �CYL-5633-089 � � � � � � � � � �CYL-5633-119 � � � � � � � � � �CYL-8, CYL-10,

CYL-11, CYL-13, CYL-16, CYL-24, CYL-39, CYL-44, CYL-53

33-133 � � � � � � � � � �CYL-5333-134 � � � � � � � � � �CYL-9

33-134-118 � � � � � �CYL-3933-136 � � � � � � � � � �CYL-8, CYL-9,

CYL-10, CYL-11, CYL-13, CYL-16, CYL-24, CYL-39, CYL-44, CYL-53

33-137 � � � � � � � � � �CYL-8, CYL-9, CYL-10, CYL-11, CYL-13, CYL-16, CYL-39, CYL-44, CYL-48, CYL-53

33-137-R1 � � � � � � �CYL-5633-138 � � � � � � � � � �CYL-8, CYL-9,

CYL-10, CYL-11, CYL-13, CYL-16, CYL-24, CYL-39, CYL-44, CYL-48, CYL-53

33-139 � � � � � � � � � �CYL-5333-154 � � � � � � � � � �CYL-8, CYL-9,

CYL-10, CYL-11, CYL-13, CYL-16, CYL-25, CYL-39, CYL-44, CYL-53

33-155-118 � � � � � �CYL-3933-159-118 � � � � � �CYL-3933-160 � � � � � � � � � �CYL-5333-162 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-163 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-167 � � � � � � � � � �CYL-2433-216 � � � � � � � � � �CYL-8, CYL-10,

CYL-11, CYL-5333-220-118 � � � � � �CYL-3933-221 � � � � � � � � � �CYL-8, CYL-9,

CYL-10, CYL-11, CYL-13, CYL-16, CYL-25, CYL-39, CYL-44, CYL-53

33-222 � � � � � � � � � �CYL-44, CYL-5333-223 � � � � � � � � � �CYL-44, CYL-5333-224 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-225 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-229-118 � � � � � �CYL-3933-231 � � � � � � � � � �CYL-44, CYL-45,

CYL-5333-232 � � � � � � � � � �CYL-44, CYL-5333-233 � � � � � � � � � �CYL-48, CYL-5333-234 � � � � � � � � � �CYL-48, CYL-5333-235 � � � � � � � � � �CYL-8, CYL-10,

CYL-11, CYL-5333-236 � � � � � � � � � �CYL-5333-406-118 � � � � � �CYL-3933-616 � � � � � � � � � �CYL-48, CYL-5333-806 � � � � � � � � � �CYL-48, CYL-5334-001 � � � � � � � � � �CYL-5034-002 � � � � � � � � � �CYL-5034-003 � � � � � � � � � �CYL-50

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-4

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

34-004 � � � � � � � � � �CYL-5034-005 � � � � � � � � � �CYL-5034-006 � � � � � � � � � �CYL-5034-007 � � � � � � � � � �CYL-5034-034 � � � � � � � � � �CYL-5634-035 � � � � � � � � � �CYL-5634-036 � � � � � � � � � �CYL-5634-037 � � � � � � � � � �CYL-5634-058 � � � � � � � � � �CYL-5034-067 � � � � � � � � � �CYL-5634-068 � � � � � � � � � �CYL-5634-069 � � � � � � � � � �CYL-5634-070 � � � � � � � � � �CYL-5634-071 � � � � � � � � � �CYL-5634-072 � � � � � � � � � �CYL-5634-073 � � � � � � � � � �CYL-5634-074 � � � � � � � � � �CYL-5634-075 � � � � � � � � � �CYL-5634-076 � � � � � � � � � �CYL-5634-077 � � � � � � � � � �CYL-5634-078 � � � � � � � � � �CYL-5634-079 � � � � � � � � � �CYL-5634-101 � � � � � � � � � �CYL-5034-102 � � � � � � � � � �CYL-5034-103 � � � � � � � � � �CYL-5034-202 � � � � � � � � � �CYL-5034-203 � � � � � � � � � �CYL-5034-204 � � � � � � � � � �CYL-5034-205 � � � � � � � � � �CYL-5034-206 � � � � � � � � � �CYL-5034-207 � � � � � � � � � �CYL-5034-208 � � � � � � � � � �CYL-5034-209 � � � � � � � � � �CYL-5034-300 � � � � � � � � � �CYL-5034-301 � � � � � � � � � �CYL-5034-302 � � � � � � � � � �CYL-5034-303 � � � � � � � � � �CYL-5034-304 � � � � � � � � � �CYL-5034-305 � � � � � � � � � �CYL-5034-306 � � � � � � � � � �CYL-5034-307 � � � � � � � � � �CYL-5034-308 � � � � � � � � � �CYL-5034-309 � � � � � � � � � �CYL-5034-401 � � � � � � � � � �CYL-50, Tool-834-800 � � � � � � � � � �CYL-5134-801 � � � � � � � � � �CYL-5134-802 � � � � � � � � � �CYL-5134-803 � � � � � � � � � �CYL-5134-804 � � � � � � � � � �CYL-5134-805 � � � � � � � � � �CYL-5134-806 � � � � � � � � � �CYL-5134-807 � � � � � � � � � �CYL-5134-808 � � � � � � � � � �CYL-5134-809 � � � � � � � � � �CYL-5134-902 � � � � � � � � � �CYL-5134-903 � � � � � � � � � �CYL-5134-904 � � � � � � � � � �CYL-5134-905 � � � � � � � � � �CYL-5134-906 � � � � � � � � � �CYL-5134-907 � � � � � � � � � �CYL-5134-908 � � � � � � � � � �CYL-5134-909 � � � � � � � � � �CYL-51

34-910 � � � � � � � � � �CYL-5134-911 � � � � � � � � � �CYL-5134-912 � � � � � � � � � �CYL-5134-913 � � � � � � � � � �CYL-5134-914 � � � � � � � � � �CYL-5134-915 � � � � � � � � � �CYL-5134-916 � � � � � � � � � �CYL-5134-917 � � � � � � � � � �CYL-5134-918 � � � � � � � � � �CYL-5134-919 � � � � � � � � � �CYL-5134-950 � � � � � � � � � �CYL-5134-952 � � � � � � � � � �CYL-5135-000 � � � � � � � � � �Keys-1035-001 � � � � � � � � � �Keys-1035-002 � � � � � � � � � �Keys-4, Keys-2135-003 � � � � � � � � � �Keys-4, Keys-2135-004 � � � � � � � � � �Keys-8, Keys-2135-004-XP � � � � � � �Keys-935-005 � � � � � � � � � �Keys-8, Keys-2135-005-XP � � � � � � �Keys-935-006 � � � � � � � � � �Keys-835-006-XP � � � � � � �Keys-935-007 � � � � � � � � � �Keys-435-008 � � � � � � � � � �Keys-1035-009 � � � � � � � � � �Keys-4, Keys-2135-012 � � � � � � � � � �Keys-835-012-XP � � � � � � �Keys-935-013 � � � � � � � � � �Keys-835-013-XP � � � � � � �Keys-935-015 � � � � � � � � � �Keys-435-016 � � � � � � � � � �Keys-435-019 � � � � � � � � � �Keys-835-019-XP � � � � � � �Keys-935-021 � � � � � � � � � �Keys-5, Keys-2235-052 � � � � � � � � � �Keys-635-052-XP � � � � � � �Keys-735-053 � � � � � � � � � �Keys-635-053-XP � � � � � � �Keys-735-056 � � � � � � � � � �Keys-2, Keys-2135-057 � � � � � � � � � �Keys-1035-076 � � � � � � � � � �Keys-235-077 � � � � � � � � � �Keys-235-079 � � � � � � � � � �Keys-235-100 � � � � � � � � � �Keys-2, Keys-2135-101 � � � � � � � � � �Keys-2, Keys-2135-102 � � � � � � � � � �Keys-235-104 � � � � � � � � � �Keys-1035-110 � � � � � � � � � �Keys-1035-111 � � � � � � � � � �Keys-1035-115 � � � � � � � � � �Keys-635-115-XP � � � � � � �Keys-735-116 � � � � � � � � � �Keys-635-116-XP � � � � � � �Keys-735-130 � � � � � � � � � �Keys-235-131 � � � � � � � � � �Keys-235-135-C � � � � � � � �Keys-1835-140 � � � � � � � � � �Keys-235-141 � � � � � � � � � �Keys-235-143 � � � � � � � � � �Keys-235-144 � � � � � � � � � �Keys-235-157 � � � � � � � � � �Keys-6, Keys-2135-157-XP � � � � � � �Keys-7

35-158 � � � � � � � � � �Keys-6, Keys-2135-158-XP � � � � � � �Keys-735-159 � � � � � � � � � �Keys-635-159-XP � � � � � � �Keys-735-223 � � � � � � � � � �Keys-1135-224 � � � � � � � � � �Keys-1135-227 � � � � � � � � � �Keys-1135-228 � � � � � � � � � �Keys-1135-229 � � � � � � � � � �Keys-1135-250 � � � � � � � � � �Keys-1035-251 � � � � � � � � � �Keys-1035-310 � � � � � � � � � �Keys-5, Keys-2235-401 � � � � � � � � � �Keys-5, Keys-2236-031 � � � � � � � � � �CL-636-056 � � � � � � � � � �H-9, S200-836-066 � � � � � � � � � �CYL-20, CYL-4136-067 � � � � � � � � � �CYL-2036-068 � � � � � � � � � �CYL-2036-069 � � � � � � � � � �CYL-2036-070 � � � � � � � � � �CYL-2036-071 � � � � � � � � � �CYL-2036-072 � � � � � � � � � �CYL-2036-079 � � � � � � � � � �CYL-3736-080 � � � � � � � � � �L-3936-082 � � � � � � � � � �CYL-3736-083 � � � � � � � � � �CYL-3736-085 � � � � � � � � � �CYL-2036-086 � � � � � � � � � �CYL-17, CYL-19,

CYL-2037-001 � � � � � � � � � �A-9, AL-10, D-10,

H-12, ND-1437-015 � � � � � � � � � �L-20, L-3537-016 � � � � � � � � � �B500-4, B500-9,

B500-10, B600-5, B600-9, B600-10, B250-8

38-017 � � � � � � � � � �B250-838-018 � � � � � � � � � �A-9, D-10, S-1038-031 � � � � � � � � � �B250-8, B500-1038-032 � � � � � � � � � �B250-838-033 � � � � � � � � � �CYL-4638-034 � � � � � � � � � �B500-8, B600-838-064 � � � � � � � � � �D-1038-065 � � � � � � � � � �D-1038-070 � � � � � � � � � �CYL-3138-076 � � � � � � � � � �D-1238-090 � � � � � � � � � �L-4138-091 � � � � � � � � � �L-4138-092 � � � � � � � � � �L-4138-093 � � � � � � � � � �L-4138-094 � � � � � � � � � �L-4138-095 � � � � � � � � � �L-4139-029 � � � � � � � � � �Merch-439-030 � � � � � � � � � �A-8, AL-9, B250-7,

B500-8, B600-8, D-9, ND-13, S-9, S200-10

39-034 � � � � � � � � � �L-4139-042 � � � � � � � � � �L-39, Merch-439-234 � � � � � � � � � �L-4140-015 � � � � � � � � � �Tool-740-017 � � � � � � � � � �Tool-7

Index

Index-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

40-026 � � � � � � � � � �Tool-740-029 � � � � � � � � � �Tool-740-030 � � � � � � � � � �Tool-740-031 � � � � � � � � � �Tool-740-032 � � � � � � � � � �Tool-740-035 � � � � � � � � � �Tool-740-049 � � � � � � � � � �Tool-740-050 � � � � � � � � � �Tool-740-054 � � � � � � � � � �Tool-840-060 � � � � � � � � � �Keys-840-060-XP � � � � � � �Keys-940-061 � � � � � � � � � �Keys-640-061-XP � � � � � � �Keys-740-062 � � � � � � � � � �Keys-640-062-XP � � � � � � �Keys-740-065 � � � � � � � � � �Keys-640-065-XP � � � � � � �Keys-740-066 � � � � � � � � � �Tool-340-070 � � � � � � � � � �Tool-240-071 � � � � � � � � � �Tool-440-074 � � � � � � � � � �Tool-340-075 � � � � � � � � � �Tool-340-090 � � � � � � � � � �Tool-540-094 � � � � � � � � � �Tool-540-097 � � � � � � � � � �Tool-840-099 � � � � � � � � � �Tool-340-100 � � � � � � � � � �CYL-440-104 � � � � � � � � � �Tool-340-112 � � � � � � � � � �Tool-740-116 � � � � � � � � � �Tool-340-119 � � � � � � � � � �Tool-240-128 � � � � � � � � � �Tool-440-129 � � � � � � � � � �Tool-440-132 � � � � � � � � � �Tool-240-133 � � � � � � � � � �Tool-240-134 � � � � � � � � � �Tool-240-147 � � � � � � � � � �Tool-940-148 � � � � � � � � � �Tool-940-149 � � � � � � � � � �Tool-740-152 � � � � � � � � � �Tool-740-153 � � � � � � � � � �Tool-740-154 � � � � � � � � � �Tool-740-155 � � � � � � � � � �Tool-740-157 � � � � � � � � � �Tool-740-158 � � � � � � � � � �Tool-740-159 � � � � � � � � � �Tool-740-160 � � � � � � � � � �Tool-1040-161 � � � � � � � � � �Tool-1040-162 � � � � � � � � � �Tool-1040-163 � � � � � � � � � �Tool-1040-164 � � � � � � � � � �Tool-1040-165 � � � � � � � � � �Tool-1040-166 � � � � � � � � � �Tool-1040-167 � � � � � � � � � �Tool-1040-168 � � � � � � � � � �Tool-1040-169 � � � � � � � � � �Tool-1040-170 � � � � � � � � � �Tool-1040-171 � � � � � � � � � �Tool-440-172 � � � � � � � � � �Tool-440-173 � � � � � � � � � �Tool-440-175 � � � � � � � � � �Tool-740-176 � � � � � � � � � �Tool-7

40-177 � � � � � � � � � �Tool-740-178 � � � � � � � � � �Tool-740-179 � � � � � � � � � �Tool-740-181 � � � � � � � � � �Tool-440-500 � � � � � � � � � �CYL-440-500-XP � � � � � � �CYL-440-700 � � � � � � � � � �CYL-440-700-XP � � � � � � �CYL-441-005 � � � � � � � � � �A-4, A-9, AL-4,

AL-1043-005 � � � � � � � � � �ND-6, ND-13, D-5,

D-1044-070 � � � � � � � � � �Merch-344-104 � � � � � � � � � �Merch-344-105 � � � � � � � � � �Merch-344-106 � � � � � � � � � �Merch-344-107 � � � � � � � � � �Merch-344-108 � � � � � � � � � �Merch-344-109 � � � � � � � � � �Merch-344-110 � � � � � � � � � �Merch-344-111 � � � � � � � � � �Merch-344-112 � � � � � � � � � �Merch-344-113 � � � � � � � � � �Merch-344-115 � � � � � � � � � �Merch-344-119 � � � � � � � � � �Merch-344-120 � � � � � � � � � �Merch-344-121 � � � � � � � � � �Merch-344-132 � � � � � � � � � �Merch-344-133 � � � � � � � � � �Merch-344-157 � � � � � � � � � �Merch-344-161 � � � � � � � � � �Merch-344-162 � � � � � � � � � �Merch-348-000 � � � � � � � � � �Keys-1048-001 � � � � � � � � � �Keys-1048-002 � � � � � � � � � �Keys-448-003 � � � � � � � � � �Keys-448-004 � � � � � � � � � �Keys-848-004-XP � � � � � � �Keys-948-005 � � � � � � � � � �Keys-848-005-XP � � � � � � �Keys-948-006 � � � � � � � � � �Keys-848-006-XP � � � � � � �Keys-948-007 � � � � � � � � � �Keys-448-008 � � � � � � � � � �Keys-1048-009 � � � � � � � � � �Keys-448-012 � � � � � � � � � �Keys-848-012-XP � � � � � � �Keys-948-013 � � � � � � � � � �Keys-448-015 � � � � � � � � � �Keys-448-016 � � � � � � � � � �Keys-448-019 � � � � � � � � � �Keys-848-019-XP � � � � � � �Keys-948-020 � � � � � � � � � �Keys-848-020-XP � � � � � � �Keys-948-021 � � � � � � � � � �Keys-5, Keys-2248-052 � � � � � � � � � �Keys-648-052-XP � � � � � � �Keys-748-053 � � � � � � � � � �Keys-648-053-XP � � � � � � �Keys-748-056 � � � � � � � � � �Keys-348-056-ICX � � � � � �Keys-1448-076 � � � � � � � � � �Keys-3

48-100 � � � � � � � � � �Keys-3, Keys-1748-101 � � � � � � � � � �Keys-348-101-ICX � � � � � �Keys-1448-102 � � � � � � � � � �Keys-348-104 � � � � � � � � � �Keys-1048-113 � � � � � � � � � �Keys-1048-114 � � � � � � � � � �Keys-1048-115 � � � � � � � � � �Keys-648-115-XP � � � � � � �Keys-748-116 � � � � � � � � � �Keys-648-116-XP � � � � � � �Keys-748-130 � � � � � � � � � �Keys-348-131 � � � � � � � � � �Keys-348-140 � � � � � � � � � �Keys-348-141 � � � � � � � � � �Keys-348-143 � � � � � � � � � �Keys-348-144 � � � � � � � � � �Keys-348-157 � � � � � � � � � �Keys-648-157-XP � � � � � � �Keys-748-158 � � � � � � � � � �Keys-648-158-XP � � � � � � �Keys-748-159 � � � � � � � � � �Keys-648-159-XP � � � � � � �Keys-748-171 � � � � � � � � � �Keys-648-171-XP � � � � � � �Keys-748-172 � � � � � � � � � �Keys-648-172-XP � � � � � � �Keys-748-223 � � � � � � � � � �Keys-1148-224 � � � � � � � � � �Keys-1148-227 � � � � � � � � � �Keys-1148-228 � � � � � � � � � �Keys-1148-229 � � � � � � � � � �Keys-1148-310 � � � � � � � � � �Keys-1548-311 � � � � � � � � � �Keys-1548-401 � � � � � � � � � �Keys-5, Keys-2249-002 � � � � � � � � � �Keys-449-003 � � � � � � � � � �Keys-449-004 � � � � � � � � � �Keys-849-004-XP � � � � � � �Keys-949-005 � � � � � � � � � �Keys-849-005-XP � � � � � � �Keys-949-007 � � � � � � � � � �Keys-449-009 � � � � � � � � � �Keys-449-012 � � � � � � � � � �Keys-849-012-XP � � � � � � �Keys-949-015 � � � � � � � � � �Keys-449-016 � � � � � � � � � �Keys-449-020 � � � � � � � � � �Keys-849-020-XP � � � � � � �Keys-949-021 � � � � � � � � � �Keys-549-021 � � � � � � � � � �Keys-2249-022 � � � � � � � � � �Keys-5, Keys-2249-052 � � � � � � � � � �Keys-649-052-XP � � � � � � �Keys-749-053 � � � � � � � � � �Keys-649-053-XP � � � � � � �Keys-749-056 � � � � � � � � � �Keys-349-076 � � � � � � � � � �Keys-349-100 � � � � � � � � � �Keys-3, Keys-1749-101 � � � � � � � � � �Keys-349-102 � � � � � � � � � �Keys-349-115 � � � � � � � � � �Keys-6

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-6

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

49-115-XP � � � � � � �Keys-749-116 � � � � � � � � � �Keys-649-116-XP � � � � � � �Keys-749-130 � � � � � � � � � �Keys-349-131 � � � � � � � � � �Keys-349-140 � � � � � � � � � �Keys-349-141 � � � � � � � � � �Keys-349-143 � � � � � � � � � �Keys-349-144 � � � � � � � � � �Keys-349-157 � � � � � � � � � �Keys-649-157-XP � � � � � � �Keys-749-158 � � � � � � � � � �Keys-649-158-XP � � � � � � �Keys-749-171 � � � � � � � � � �Keys-649-171-XP � � � � � � �Keys-749-172 � � � � � � � � � �Keys-649-172-XP � � � � � � �Keys-749-223 � � � � � � � � � �Keys-1149-224 � � � � � � � � � �Keys-1149-227 � � � � � � � � � �Keys-1149-228 � � � � � � � � � �Keys-1149-229 � � � � � � � � � �Keys-1149-356 � � � � � � � � � �Keys-549-356 � � � � � � � � � �Keys-2249-401 � � � � � � � � � �Keys-5, Keys-2250-001 � � � � � � � � � �Keys-1650-002 � � � � � � � � � �Keys-1350-003 � � � � � � � � � �Keys-1250-110 � � � � � � � � � �Tool-850-120 � � � � � � � � � �Keys-1950-121 � � � � � � � � � �Keys-1950-122 � � � � � � � � � �Keys-1950-123 � � � � � � � � � �Keys-1950-210 � � � � � � � � � �Keys-1650-211 � � � � � � � � � �Keys-1650-212 � � � � � � � � � �Keys-1650-213 � � � � � � � � � �Keys-1650-214 � � � � � � � � � �Keys-2050-215 � � � � � � � � � �Keys-2050-216 � � � � � � � � � �Keys-1350-217 � � � � � � � � � �Keys-1250-219 � � � � � � � � � �Keys-1250-220 � � � � � � � � � �Keys-1250-221 � � � � � � � � � �Keys-1250-223 � � � � � � � � � �Keys-1750-224 � � � � � � � � � �Keys-1750-227 � � � � � � � � � �Keys-2050-228 � � � � � � � � � �Keys-2050-230 � � � � � � � � � �Keys-1850-231 � � � � � � � � � �Keys-14, Keys-1550-232 � � � � � � � � � �Keys-2050-233 � � � � � � � � � �Keys-1250-280 � � � � � � � � � �Keys-2350-281 � � � � � � � � � �Keys-2350-600 � � � � � � � � � �Keys-1951-021 � � � � � � � � � �AL-851-022 � � � � � � � � � �AL-851-023 � � � � � � � � � �AL-851-024 � � � � � � � � � �AL-851-025 � � � � � � � � � �AL-851-026 � � � � � � � � � �AL-851-037 � � � � � � � � � �AL-12

51-038 � � � � � � � � � �AL-1251-039 � � � � � � � � � �AL-1251-040 � � � � � � � � � �AL-1251-041 � � � � � � � � � �AL-1260-000 � � � � � � � � � �Keys-2060-001 � � � � � � � � � �Keys-2061-500 � � � � � � � � � �B500-1261-501 � � � � � � � � � �B500-1261-502 � � � � � � � � � �B500-1261-503 � � � � � � � � � �B500-1261-504 � � � � � � � � � �B500-1261-505 � � � � � � � � � �B500-1261-506 � � � � � � � � � �B500-1261-507 � � � � � � � � � �B500-1261-509 � � � � � � � � � �B500-1061-509 � � � � � � � � � �Keys-1061-510 � � � � � � � � � �B500-10, Keys-1068-001 � � � � � � � � � �S-8, S200-968-002 � � � � � � � � � �S-868-003 � � � � � � � � � �S-868-003 � � � � � � � � � �S200-968-004 � � � � � � � � � �S-8, S200-968-011 � � � � � � � � � �S-868-012 � � � � � � � � � �S-868-013 � � � � � � � � � �S-880-033 � � � � � � � � � �CYL-4380-035 � � � � � � � � � �Keys-1580-036 � � � � � � � � � �CYL-43, Keys-2280-037 � � � � � � � � � �CYL-43, Keys-2280-043 � � � � � � � � � �CYL-4380-101 � � � � � � � � � �CYL-3480-102 � � � � � � � � � �CYL-3480-103 � � � � � � � � � �CYL-3580-104 � � � � � � � � � �CYL-3480-105 � � � � � � � � � �CYL-3580-108 � � � � � � � � � �CYL-3480-109 � � � � � � � � � �CYL-3480-110 � � � � � � � � � �CYL-3480-111 � � � � � � � � � �CYL-3580-112 � � � � � � � � � �CYL-3480-113 � � � � � � � � � �CYL-3580-115 � � � � � � � � � �CYL-3480-116 � � � � � � � � � �CYL-4180-129 � � � � � � � � � �CYL-4180-131 � � � � � � � � � �CYL-3480-132 � � � � � � � � � �CYL-3480-133 � � � � � � � � � �CYL-3580-134 � � � � � � � � � �CYL-3480-135 � � � � � � � � � �CYL-3580-138 � � � � � � � � � �CYL-3480-159 � � � � � � � � � �CYL-4180-301 � � � � � � � � � �CYL-3480-302 � � � � � � � � � �CYL-3480-303 � � � � � � � � � �CYL-3580-304 � � � � � � � � � �CYL-3480-305 � � � � � � � � � �CYL-3580-308 � � � � � � � � � �CYL-3480-329 � � � � � � � � � �CYL-41

AA09894-001-00 � � �CYL-38

A09894-021-00 � � �CYL-38A09897-024-00 � � �CYL-38A100-045 � � � � � � �CYL-44, CYL-55A100-046 � � � � � � �CYL-44, CYL-55A100-047 � � � � � � �CYL-55A100-048 � � � � � � �CYL-44, CYL-55A100-049 � � � � � � �CYL-44, CYL-55A100-050 � � � � � � �CYL-44, CYL-55A100-051 � � � � � � �CYL-48, CYL-55A100-052 � � � � � � �CYL-44A100-053 � � � � � � �AL-11A100-054 � � � � � � �AL-11A12667-003-00 � � �CYL-38A201-330 � � � � � � �A-10A201-370 � � � � � � �A-10, AL-11, H-13A201-377 � � � � � � �A-10A201-399 � � � � � � �A-10, H-13A201-406 � � � � � � �A-10, H-13A201-558 � � � � � � �A-10A201-684 � � � � � � �A-10A201-688 � � � � � � �A-10A201-690 � � � � � � �CYL-44, CYL-55A201-691 � � � � � � �CYL-55A201-698 � � � � � � �CYL-48A201-811 � � � � � � �A-12A201-812 � � � � � � �A-12A201-814 � � � � � � �A-12A201-848 � � � � � � �CYL-8, CYL-55A201-849 � � � � � � �CYL-48A201-934 � � � � � � �CYL-14A301-043 � � � � � � �CYL-45A301-337 � � � � � � �CYL-8, CYL-10,

CYL-14A301-338 � � � � � � �CYL-8, CYL-14,

CYL-45A301-339 � � � � � � �CYL-8, CYL-14A301-386 � � � � � � �A-10, H-13A301-387 � � � � � � �A-10, H-13A301-391 � � � � � � �A-10A301-402 � � � � � � �A-10, AL-11, H-13A301-403 � � � � � � �A-10A301-404 � � � � � � �A-10A301-405 � � � � � � �A-10A301-406 � � � � � � �A-10A301-409 � � � � � � �A-10A301-410 � � � � � � �A-10A500-001 � � � � � � �A-10A500-002 � � � � � � �A-10A501-161 � � � � � � �A-12A501-167 � � � � � � �A-10, AL-11,

D-11A501-171 � � � � � � �AL-13, D-13,

ND-16A501-305 � � � � � � �A-10, AL-11, H-13A501-311 � � � � � � �AL-11A501-498 � � � � � � �A-10A501-499 � � � � � � �A-10A501-565 � � � � � � �A-9, AL-10,

B250-8, B500-10, B600-10, D-10, H-12, ND-14

Index

Index-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

A501-566 � � � � � � �A-9, AL-10, B250-8, B500-10, B600-10, D-10, H-12, ND-14

A501-567 � � � � � � �A-9, AL-10, D-10A501-615 � � � � � � �A-10, AL-11, H-13A501-633 � � � � � � �A-10A501-693 � � � � � � �CYL-8, CYL-14A501-710 � � � � � � �A-10, H-13A501-721 � � � � � � �A-10, AL-11A501-746 � � � � � � �AL-13, D-13A501-766 � � � � � � �A-10A501-767 � � � � � � �A-10A501-768 � � � � � � �A-10A501-769 � � � � � � �A-12A501-770 � � � � � � �A-12A501-783 � � � � � � �CYL-45A501-791 � � � � � � �A-10, AL-11A501-818 � � � � � � �A-12, H-14A501-874 � � � � � � �A-10, AL-11A501-878 � � � � � � �A-9, AL-10,

B500-10, D-10, S-10

A501-901 � � � � � � �A-10, AL-11, H-13A501-941 � � � � � � �A-7, H-9A501-991 � � � � � � �CYL-8, CYL-14A508-399 � � � � � � �A-10, H-13A508-597 � � � � � � �A-10, AL-11, H-13A508-598 � � � � � � �A-11, H-13A508-600 � � � � � � �A-11, H-13A508-605 � � � � � � �A-11, H-13A508-606 � � � � � � �CYL-8, CYL-14A508-614 � � � � � � �CYL-14A508-637 � � � � � � �CYL-44A508-640 � � � � � � �A-11A508-641 � � � � � � �A-11A508-649 � � � � � � �A-12A508-650 � � � � � � �A-12A508-653 � � � � � � �CYL-8, CYL-9,

CYL-10, CYL-11, CYL-13, CYL-16, CYL-24, CYL-39, CYL-44, CYL-45, CYL-54, CYL-55

A508-655 � � � � � � �CYL-8, CYL-9, CYL-10, CYL-11, CYL-13, CYL-16, CYL-24, CYL-39, CYL-44, CYL-45, CYL-54, CYL-55

A590-158 � � � � � � �A-11, AL-11, H-13A590-159 � � � � � � �A-11, AL-11, H-13A590-180 � � � � � � �A-11, AL-11A590-181 � � � � � � �A-11, AL-11, H-13A700-003 � � � � � � �AL-11A700-004 � � � � � � �AL-11A700-014 � � � � � � �AL-11A700-015 � � � � � � �AL-11A700-016 � � � � � � �AL-11A700-017 � � � � � � �A-10, AL-11A700-021 � � � � � � �AL-8

A700-023 � � � � � � �CYL-10, CYL-14A700-028 � � � � � � �AL-12A700-029 � � � � � � �AL-12A700-030 � � � � � � �AL-12A700-031 � � � � � � �CYL-10, CYL-14,

CYL-39A700-032 � � � � � � �AL-13A700-033 � � � � � � �AL-12A700-034 � � � � � � �AL-12A700-036 � � � � � � �AL-11A700-039 � � � � � � �AL-11A700-041 � � � � � � �AL-11A700-043 � � � � � � �AL-12A700-044 � � � � � � �AL-11A700-045 � � � � � � �AL-11A700-046 � � � � � � �AL-11A700-047 � � � � � � �AL-11A700-048 � � � � � � �AL-12A700-049 � � � � � � �AL-12A700-050 � � � � � � �AL-12A700-051 � � � � � � �AL-12A700-052 � � � � � � �AL-8A700-056 � � � � � � �AL-11A700-057 � � � � � � �AL-11A710-001 � � � � � � �AL-11A710-004 � � � � � � �AL-11A710-007 � � � � � � �AL-11A710-008 � � � � � � �AL-11A710-011 � � � � � � �AL-11A710-012 � � � � � � �AL-11A710-020 � � � � � � �AL-11

BB202-267 � � � � � � � �CYL-20, CYL-21B202-269 � � � � � � �CYL-20, CYL-21B202-328 � � � � � � �CYL-41B202-339 � � � � � � �CYL-46B202-369 � � � � � � �CYL-20, CYL-21B202-370 � � � � � � �CYL-20, CYL-21,

CYL-27B202-453 � � � � � � �CYL-20, CYL-21,

CYL-27B202-509 � � � � � � �B250-10B202-517 � � � � � � �AL-13, B250-10,

D-13, ND-16B202-557 � � � � � � �CYL-20, CYL-27B202-558 � � � � � � �CYL-20, CYL-21B202-560 � � � � � � �B250-10B202-580 � � � � � � �CYL-17, CYL-20,

CYL-21B202-671 � � � � � � �B250-6B202-672 � � � � � � �B250-6B202-824 � � � � � � �CYL-18B202-825 � � � � � � �CYL-18B202-957 � � � � � � �CYL-17, CYL-20,

CYL-21B220-001 � � � � � � �CYL-41B220-006 � � � � � � �CYL-55B220-032 � � � � � � �CYL-20, CYL-21,

CYL-27B220-036 � � � � � � �CYL-20B220-043 � � � � � � �B250-10

B220-050 � � � � � � �CYL-35B220-117 � � � � � � �CYL-55B220-122 � � � � � � �CYL-39B220-280 � � � � � � �CYL-55B220-282 � � � � � � �CYL-55B220-284 � � � � � � �CYL-55B220-300 � � � � � � �CYL-39B220-312 � � � � � � �CYL-39B250PD � � � � � � � � �B250-3B252PD � � � � � � � � �B250-3B300-108 � � � � � � �CYL-23B300-111 � � � � � � �CYL-23B300-118 � � � � � � �CYL-23B300-120 � � � � � � �CYL-23B300-130 � � � � � � �CYL-23B300-203 � � � � � � �CYL-23B300-210 � � � � � � �CYL-23B300-211 � � � � � � �CYL-23B302-001 � � � � � � �CYL-23B302-002 � � � � � � �CYL-23B302-020 � � � � � � �CYL-22B302-041 � � � � � � �B500-8B302-043 � � � � � � �CYL-17B302-045 � � � � � � �B500-8B302-220 � � � � � � �CYL-22B302-420 � � � � � � �CYL-22B302-430 � � � � � � �CYL-22B500-304 � � � � � � �CYL-23B500-305 � � � � � � �CYL-23B500-306 � � � � � � �CYL-23B502-191 � � � � � � �CYL-31, CYL-38,

CYL-47B502-200 � � � � � � �CYL-41B502-209 � � � � � � �CYL-41B502-292 � � � � � � �CYL-31B502-310 � � � � � � �CYL-3B502-310-604 � � � �CYL-41B502-380 � � � � � � �CYL-31B502-468 � � � � � � �CYL-31, CYL-48B502-486 � � � � � � �CYL-46B502-711 � � � � � � �B250-6B502-815 � � � � � � �B250-6B502-899 � � � � � � �CYL-3, CYL-41B502-907 � � � � � � �CYL-38, CYL-39B502-942 � � � � � � �CYL-31, CYL-48B502-943 � � � � � � �CYL-31B502-944 � � � � � � �CYL-31B502-945 � � � � � � �CYL-31B502-946 � � � � � � �CYL-46B502-948 � � � � � � �CYL-31, CYL-38,

CYL-39, CYL-47B502-998 � � � � � � �S200-12B502-999 � � � � � � �CYL-20, CYL-21B520-086 � � � � � � �B250-9B520-087 � � � � � � �B250-9B520-153 � � � � � � �CYL-41B520-191 � � � � � � �CYL-47B520-223 � � � � � � �CYL-47B520-235 � � � � � � �CYL-19B520-236 � � � � � � �CYL-20, CYL-21B520-237 � � � � � � �CYL-20, CYL-21B520-240 � � � � � � �CYL-19, CYL-27

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-8

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

B520-242 � � � � � � �CYL-20, CYL-21B520-243 � � � � � � �CYL-20, CYL-21B520-253 � � � � � � �CYL-47B520-254 � � � � � � �CYL-47B520-256 � � � � � � �CYL-47B520-267 � � � � � � �B250-9B520-268 � � � � � � �B250-9B520-269 � � � � � � �B250-9B520-271 � � � � � � �B250-9B520-283 � � � � � � �B500-9, B600-9B520-295 � � � � � � �CYL-47B520-296 � � � � � � �CYL-47B520-298 � � � � � � �B500-11, CYL-18,

CYL-26B520-309 � � � � � � �CYL-47B520-329 � � � � � � �CYL-47B520-360 � � � � � � �CYL-47B520-361 � � � � � � �CYL-41B520-366 � � � � � � �CYL-47B520-367 � � � � � � �CYL-47B520-378 � � � � � � �CYL-33, CYL-35B520-407 � � � � � � �CYL-45B520-408 � � � � � � �CYL-45B520-409 � � � � � � �CYL-45B520-483 � � � � � � �CYL-35B520-484 � � � � � � �CYL-35B520-541 � � � � � � �CYL-17, CYL-19,

CYL-20B520-622 � � � � � � �B500-10, B600-10B520-648 � � � � � � �CYL-17B520-649 � � � � � � �B500-10B520-650 � � � � � � �B500-10B520-651 � � � � � � �CYL-17B520-652 � � � � � � �CYL-17B520-653 � � � � � � �CYL-17B520-662 � � � � � � �B500-11B520-663 � � � � � � �B500-11B520-667 � � � � � � �CYL-17B520-685 � � � � � � �CYL-19B520-690 � � � � � � �CYL-3, CYL-31,

CYL-52, CYL-54B520-691 � � � � � � �CYL-3, CYL-31,

CYL-52, CYL-54B520-692 � � � � � � �CYL-3, CYL-31,

CYL-52, CYL-54B520-693 � � � � � � �CYL-31, CYL-54B520-721 � � � � � � �CYL-3, CYL-52,

CYL-54B520-722 � � � � � � �CYL-3, CYL-52,

CYL-54B520-723 � � � � � � �CYL-3, CYL-52,

CYL-54B520-724 � � � � � � �CYL-3, CYL-52,

CYL-54B520-725 � � � � � � �CYL-3, CYL-52,

CYL-54B520-726 � � � � � � �CYL-3, CYL-52,

CYL-54B520-727 � � � � � � �CYL-3, CYL-54B520-728 � � � � � � �CYL-46B520-729 � � � � � � �CYL-46B520-730 � � � � � � �CYL-47

B520-731 � � � � � � �CYL-47B520-732 � � � � � � �CYL-47B520-733 � � � � � � �CYL-47B520-734 � � � � � � �CYL-47B520-735 � � � � � � �CYL-47B520-736 � � � � � � �CYL-47B520-737 � � � � � � �CYL-47B520-740 � � � � � � �CYL-31, CYL-38B520-741 � � � � � � �CYL-31, CYL-38B520-743 � � � � � � �CYL-31B520-744 � � � � � � �CYL-31B560BD � � � � � � � � �B500-6B560BDF� � � � � � � �B500-6B560GD � � � � � � � �B500-6B560GDF � � � � � � �B500-6B560J � � � � � � � � � �B500-5B560JF � � � � � � � � �B500-5B560P � � � � � � � � � �B500-3B560PF � � � � � � � � �B500-3B560R � � � � � � � � � �B500-5B560RF � � � � � � � � �B500-5B561BD � � � � � � � � �B500-6B561BDF� � � � � � � �B500-6B561GD � � � � � � � �B500-6B561GDF � � � � � � �B500-6B561J � � � � � � � � � �B500-5B561JF � � � � � � � � �B500-5B561P � � � � � � � � � �B500-3B561PF � � � � � � � � �B500-3B561R � � � � � � � � � �B500-5B561RF � � � � � � � � �B500-5B562BD � � � � � � � � �B500-6B562GD � � � � � � � �B500-6B562J � � � � � � � � � �B500-5B562P � � � � � � � � � �B500-3B562R � � � � � � � � � �B500-5B563BD � � � � � � � � �B500-6B563BDF� � � � � � � �B500-6B563GD � � � � � � � �B500-6B563GDF � � � � � � �B500-6B563J � � � � � � � � � �B500-5B563JF � � � � � � � � �B500-5B563P � � � � � � � � � �B500-3B563PF � � � � � � � � �B500-3B563R � � � � � � � � � �B500-5B563RF � � � � � � � � �B500-5B571 � � � � � � � � � � �B500-3B580 � � � � � � � � � � �B500-3B580F � � � � � � � � � �B500-3B581 � � � � � � � � � � �B500-3B581F � � � � � � � � � �B500-3B590-295 � � � � � � �CYL-31B590-298 � � � � � � �CYL-3, CYL-54B590-299 � � � � � � �CYL-3, CYL-54B590-443 � � � � � � �CYL-20B600-015 � � � � � � �CYL-26B600-016 � � � � � � �CYL-26, CYL-27B600-017 � � � � � � �B600-8B600-018 � � � � � � �B500-8, B600-8B600-029 � � � � � � �CYL-17, CYL-19,

CYL-27B600-032 � � � � � � �CYL-19

B600-040 � � � � � � �CYL-17B600-041 � � � � � � �CYL-17, CYL-19B600-045 � � � � � � �CYL-17B600-046 � � � � � � �CYL-17B600-047 � � � � � � �B500-11B600-048 � � � � � � �B500-11B600-053 � � � � � � �B500-11B600-066 � � � � � � �B500-11B600-071 � � � � � � �CYL-17, CYL-19B600-078 � � � � � � �B500-11B600-085 � � � � � � �CYL-17B600-086 � � � � � � �CYL-17B600-090 � � � � � � �CYL-26B600-092 � � � � � � �CYL-17, CYL-26B600-100 � � � � � � �B500-11B600-106 � � � � � � �CYL-17, CYL-27B600-107 � � � � � � �CYL-17, CYL-27,

CYL-41B600-108 � � � � � � �CYL-17, CYL-27B610-014 � � � � � � �CYL-17, CYL-27B610-024 � � � � � � �CYL-26B610-025 � � � � � � �CYL-26B610-027 � � � � � � �CYL-27B610-028 � � � � � � �CYL-17, CYL-27B610-031 � � � � � � �CYL-17, CYL-27B610-032 � � � � � � �CYL-17, CYL-27B610-035 � � � � � � �B600-8B610-040 � � � � � � �CYL-17, CYL-27B610-041 � � � � � � �CYL-17, CYL-26,

CYL-27B610-042 � � � � � � �CYL-26B610-049 � � � � � � �B600-10B610-050 � � � � � � �B600-10B610-051 � � � � � � �B600-10B610-053 � � � � � � �B600-10B610-054 � � � � � � �B600-10B610-055 � � � � � � �B600-10B610-056 � � � � � � �B600-10B610-059 � � � � � � �B600-11B610-061 � � � � � � �B600-11B610-062 � � � � � � �B600-11B610-063 � � � � � � �B600-11B610-064 � � � � � � �B600-11B610-065 � � � � � � �B600-11B610-065 � � � � � � �B600-11B610-066 � � � � � � �B600-10B610-071 � � � � � � �CYL-26B610-082 � � � � � � �CYL-24, CYL-25,

CYL-26B610-083 � � � � � � �CYL-24, CYL-25,

CYL-26B610-084 � � � � � � �CYL-24, CYL-25,

CYL-26B610-085 � � � � � � �CYL-24B610-085 � � � � � � �CYL-24, CYL-25,

CYL-26B610-086 � � � � � � �CYL-24, CYL-25,

CYL-26B610-203 � � � � � � �CYL-17B610-204 � � � � � � �CYL-17B610-205 � � � � � � �CYL-17B610-281 � � � � � � �CYL-17, CYL-27

Index

Index-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

B610-282 � � � � � � �CYL-27

CC100-059 � � � � � � � �D-11C100-062 � � � � � � �D-11C102-522 � � � � � � �D-11C102-524 � � � � � � �D-11C102-540 � � � � � � �D-11C102-541 � � � � � � �D-11C102-542 � � � � � � �D-11C102-570 � � � � � � �D-11C102-572 � � � � � � �D-11C102-837 � � � � � � �D-11C102-840 � � � � � � �D-11C203-034 � � � � � � �D-11C203-311 � � � � � � �A-12, AL-13,

B250-10, B600-11, D-13, ND-16, S-10, S200-12

C203-312 � � � � � � �A-12, AL-13, B250-10, B600-11, D-13, ND-16, S-10

C203-376 � � � � � � �D-11C203-390 � � � � � � �D-11C203-391 � � � � � � �D-11C203-411 � � � � � � �D-11C203-726 � � � � � � �CYL-48, CYL-55C203-733 � � � � � � �D-11C203-736 � � � � � � �AL-13, D-13,

L-42, ND-16 C203-858 � � � � � � �D-11C203-947 � � � � � � �D-11C203-948 � � � � � � �D-11C303-006 � � � � � � �D-11C303-007 � � � � � � �D-13C303-028 � � � � � � �D-13C303-029 � � � � � � �AL-13C303-400 � � � � � � �D-11C303-421 � � � � � � �AL-13C303-437 � � � � � � �CYL-44, CYL-45C303-438 � � � � � � �AL-13C303-439 � � � � � � �D-11, ND-15,C503-008 � � � � � � �A-11, D-11, H-13C503-019 � � � � � � �D-11, ND-15C503-113 � � � � � � �CYL-50C503-115 � � � � � � �CYL-42, CYL-50C503-116 � � � � � � �CYL-50C503-118 � � � � � � �CYL-42, CYL-50C503-308 � � � � � � �AL-11, D-11C503-314 � � � � � � �D-11C503-324 � � � � � � �D-11C503-331 � � � � � � �ND-15C503-334 � � � � � � �D-11C503-335 � � � � � � �D-11C503-339 � � � � � � �D-11C503-346 � � � � � � �CYL-48C503-359 � � � � � � �D-11C503-360 � � � � � � �D-11C503-361 � � � � � � �D-11C503-362 � � � � � � �D-11

C503-368 � � � � � � �D-11C503-371 � � � � � � �D-12C503-400 � � � � � � �D-12C503-403 � � � � � � �D-8C503-737 � � � � � � �D-12C503-746 � � � � � � �D-8C503-767 � � � � � � �CYL-14C503-768 � � � � � � �D-12C503-775 � � � � � � �D-12C503-833 � � � � � � �CYL-50C503-940 � � � � � � �D-8C503-965 � � � � � � �D-12C504-114 � � � � � � �CYL-51C504-116 � � � � � � �CYL-51C603-098 � � � � � � �CYL-26C603-195 � � � � � � �CYL-14C603-256 � � � � � � �A-12, AL-13,

B250-9, B600-10, D-13, ND-16, S-10

C603-262 � � � � � � �D-8C603-500 � � � � � � �D-12C603-524 � � � � � � �CYL-14C603-569 � � � � � � �D-8C603-623 � � � � � � �B250-7C603-827 � � � � � � �CYL-42, CYL-50C603-897 � � � � � � �A-12, AL-13,

B250-9, B500-11, B600-10, D-13, ND-16, S-10, S200-12

C603-936 � � � � � � �CYL-51C603-950 � � � � � � �CYL-50C603-951 � � � � � � �CYL-50C603-952 � � � � � � �CYL-50C603-956 � � � � � � �CYL-42C603-964 � � � � � � �CYL-42C603-967 � � � � � � �CYL-42C604-050 � � � � � � �CYL-48C604-051 � � � � � � �CYL-48C604-052 � � � � � � �CYL-48C604-053 � � � � � � �CYL-48C604-088 � � � � � � �CYL-48C604-088 � � � � � � �CYL-48C604-089 � � � � � � �CYL-48C604-106 � � � � � � �CYL-10, CYL-14C604-107 � � � � � � �CYL-10, CYL-14C604-144 � � � � � � �CYL-14C604-187 � � � � � � �D-12, ND-15C604-188 � � � � � � �D-12, ND-15C604-191 � � � � � � �D-12, ND-15C604-204 � � � � � � �D-12C604-205 � � � � � � �D-12C604-226 � � � � � � �CYL-48C604-234 � � � � � � �CYL-48C604-243 � � � � � � �CYL-9, CYL-10,

CYL-11, CYL-14, CYL-39, CYL-44, CYL-45

C604-268 � � � � � � �CYL-48C604-269 � � � � � � �CYL-48C604-271 � � � � � � �CYL-48

C604-273 � � � � � � �AL-11, D-12C604-307 � � � � � � �A-7, H-9C604-312 � � � � � � �D-12C604-333 � � � � � � �D-8C604-334 � � � � � � �CYL-33C604-340 � � � � � � �ND-15C604-348 � � � � � � �CYL-11, CYL-14C604-354 � � � � � � �AL-11C604-362 � � � � � � �CYL-14C604-368 � � � � � � �CYL-14C604-369 � � � � � � �CYL-14C604-371 � � � � � � �CYL-14C604-372 � � � � � � �CYL-14C604-381 � � � � � � �AL-8C604-395 � � � � � � �AL-13C604-400 � � � � � � �AL-11C604-402 � � � � � � �AL-11C604-419 � � � � � � �CYL-48C604-524 � � � � � � �CYL-9, CYL-10,

CYL-14, CYL-39C607-062 � � � � � � �CYL-45CL10-301 � � � � � � �CL-6, CYL-15CL10-350 � � � � � � �CL-6CL10-352 � � � � � � �CL-6CL10-354 � � � � � � �CL-5, CL-6CL10-355 � � � � � � �CL-5, CL-6CL10-360 � � � � � � �CL-7, CYL-13CL10-360 � � � � � � �CYL-15CL10-361 � � � � � � �CL-7, CYL-15CL10-362 � � � � � � �CL-7, CYL-15CL154PB � � � � � � � �CL-2CL154PB-XP � � � � �CL-2CL174PB � � � � � � � �CL-2CL174PB-XP � � � � �CL-2CL200PB � � � � � � � �CL-2CL254PB � � � � � � � �CL-2CL254PB-XP � � � � �CL-2CL274PB � � � � � � � �CL-2CL274PB-XP � � � � �CL-2CL720-3-1 � � � � � � �CL-7CL720-3-2 � � � � � � �CL-7CL720-3-3 � � � � � � �CL-7CL720-3-4 � � � � � � �CL-7CL720-3-5 � � � � � � �CL-7CL720G � � � � � � � � �CL-4CL721G � � � � � � � � �CL-4CL725-1 � � � � � � � �CL-7CL725G � � � � � � � � �CL-4CL725-SP � � � � � � �CL-7CL728G � � � � � � � � �CL-4CL729G � � � � � � � � �CL-4CL729S-2 � � � � � � �CL-7CL729S-3 � � � � � � �CL-7CL771G � � � � � � � � �CL-4CL774R � � � � � � � � �CL-3CL774R-XP � � � � � �CL-3CL775G � � � � � � � � �CL-4CL775-SP � � � � � � �CL-7CL777R � � � � � � � � �CL-3CL7788-PA-D � � � �CL-7CL874R � � � � � � � � �CL-3CL874R-XP � � � � � �CL-3

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-10

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

CL888R � � � � � � � � �CL-3CL920R � � � � � � � � �CL-3CL974R � � � � � � � � �CL-3CL974R-XP � � � � � �CL-3CL-ETS1 � � � � � � � �CL-7CLTR78 � � � � � � � � �CL-7CS210PD � � � � � � �CS210-4

DD500-000 � � � � � � �AL-8, ND-12

EE205-204� � � � � � � �CYL-20, CYL-21E505-315� � � � � � � �H-14E505-366� � � � � � � �H-14

FF306-139 � � � � � � � �CYL-22F506-237 � � � � � � � �S-10F506-278 � � � � � � � �S-10F506-359 � � � � � � � �B500-11F506-878 � � � � � � � �H-12F605-038 � � � � � � � �CYL-15

GG105-023 � � � � � � �H-13G105-209 � � � � � � �H-13G105-249 � � � � � � �H-13G506-815 � � � � � � �A-9, AL-10, D-10,

H-12, S-10, S200-12

G570-159 � � � � � � �CYL-20, CYL-21G570-160 � � � � � � �CYL-20, CYL-21G570-232 � � � � � � �A-11, H-13

JJ250-028 � � � � � � � �B500-4, B500-11,

B600-5

KK110-020 � � � � � � �L-42K110-480 � � � � � � �CYL-54K110-550 � � � � � � �L-39K110-947 � � � � � � �L-42K510-045 � � � � � � �CYL-50K510-053 � � � � � � �L-35K510-066 � � � � � � �A-4, A-8, AL-4,

AL-9, B250-4, B250-7, B600-9, D-5, D-9, L-35, ND-6, ND-13, S-4, S-9

K510-320 � � � � � � �L-39K510-330 � � � � � � �L-36K510-389 � � � � � � �L-37K510-390 � � � � � � �L-37K510-434 � � � � � � �CYL-50K510-474 � � � � � � �CYL-33K510-680 � � � � � � �CYL-33, CYL-35,

CYL-38

K510-711 � � � � � � �CYL-33, CYL-35K510-730 � � � � � � �CYL-33, CYL-35,

CYL-38, CYL-47K510-842 � � � � � � �L-39KC215A130 � � � � � �PS-6KC215B130 � � � � �PS-6KC215E220 � � � � � �PS-4KS11D1200 � � � � � �PS-6KS11F1200 � � � � � �PS-6KS21D1200 � � � � � �PS-6KS21F1200 � � � � � �PS-6KS23D2200 � � � � � �PS-3, PS-5KS23D2300 � � � � � �PS-4KS23F2200 � � � � � �PS-3, PS-3, PS-5KS23F2300 � � � � � �PS-4KS41D1200 � � � � � �PS-6KS41F1200 � � � � � �PS-6KS43D2200 � � � � � �PS-3KS43D2200 � � � � � �PS-5KS43D2300 � � � � � �PS-4KS43D3200 � � � � � �PS-3, PS-7KS43F2200 � � � � � �PS-3, PS-5KS43F2300 � � � � � �PS-4KS43F3200 � � � � � �PS-3, PS-7KS72F2300 � � � � � �PS-4KZ11A10 � � � � � � � �PS-10KZ11A20 � � � � � � � �PS-10KZ11A40 � � � � � � � �PS-10KZ11D10 � � � � � � � �PS-10KZ11D20 � � � � � � � �PS-10KZ11D40 � � � � � � � �PS-10KZ11F10 � � � � � � � �PS-10KZ11F20 � � � � � � � �PS-10KZ11F40 � � � � � � � �PS-10KZ11G10 � � � � � � � �PS-10KZ11G20 � � � � � � � �PS-10KZ11G40 � � � � � � � �PS-10KZ12A10 � � � � � � � �PS-10KZ12A20 � � � � � � � �PS-10KZ12A40 � � � � � � � �PS-10KZ12D10 � � � � � � � �PS-10KZ12D20 � � � � � � � �PS-10KZ12D40 � � � � � � � �PS-10KZ12F10 � � � � � � � �PS-10KZ12F20 � � � � � � � �PS-10KZ12F40 � � � � � � � �PS-10KZ12G10 � � � � � � � �PS-10KZ12G20 � � � � � � � �PS-10KZ12G40 � � � � � � � �PS-10KZ200AL � � � � � � � �PS-9KZ31CB1 � � � � � � �PS-9KZ31CB2 � � � � � � �PS-9KZ31DA0 � � � � � � � �PS-9KZ32BB0� � � � � � � �CYL-15KZ32CB1 � � � � � � �PS-9KZ32CB2 � � � � � � �PS-9KZ32DA0 � � � � � � � �CYL-13, CYL-15,

PS-9KZ33DC0 � � � � � � �CYL-15KZ34CA0� � � � � � � �CYL-15KZ34ED0 � � � � � � � �CYL-15KZ38BA1 � � � � � � � �CYL-15

KZ38BA2 � � � � � � � �CYL-15KZ390AL � � � � � � � �PS-9, Tool-8

LL0170 � � � � � � � � � � �L-9, L-11, L-13,

L-15L0172 � � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L283-003 � � � � � � � �L-39L283-004 � � � � � � � �L-39L283-006 � � � � � � � �L-39L283-008 � � � � � � � �L-39L283-010 � � � � � � � �L-39L283-029 � � � � � � � �L-39L283-030 � � � � � � � �L-39L283-031 � � � � � � � �L-39L283-039 � � � � � � � �L-38L283-040 � � � � � � � �L-39, L-41L283-049 � � � � � � � �L-39L283-053 � � � � � � � �L-37L283-055 � � � � � � � �L-39L283-056 � � � � � � � �L-36L283-057 � � � � � � � �L-39L283-060 � � � � � � � �L-37L283-061 � � � � � � � �L-37L283-062 � � � � � � � �L-38L283-064 � � � � � � � �L-37L283-065 � � � � � � � �L-37L283-075 � � � � � � � �L-39L283-085 � � � � � � � �L-38L283-086 � � � � � � � �L-38L283-099 � � � � � � � �L-38L283-100 � � � � � � � �L-42L283-101 � � � � � � � �L-42L283-112 � � � � � � � �L-39L283-121 � � � � � � � �L-42L283-122 � � � � � � � �L-42L283-123 � � � � � � � �L-42L283-124 � � � � � � � �L-36L283-126 � � � � � � � �L-38L283-127 � � � � � � � �L-39L283-128 � � � � � � � �L-39L283-131 � � � � � � � �L-38L283-132 � � � � � � � �L-38L283-133 � � � � � � � �L-38L283-134 � � � � � � � �L-38L283-137 � � � � � � � �L-38L283-138 � � � � � � � �L-38L283-139 � � � � � � � �L-38L283-140 � � � � � � � �L-38L283-141 � � � � � � � �L-38L283-142 � � � � � � � �L-38L283-143 � � � � � � � �L-38L283-144 � � � � � � � �L-38L283-145 � � � � � � � �L-38L283-146 � � � � � � � �L-38L283-150 � � � � � � � �L-39L283-170 � � � � � � � �L-38L283-171 � � � � � � � �L-38L283-172 � � � � � � � �L-38L283-173 � � � � � � � �L-38L283-174 � � � � � � � �L-38

Index

Index-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

L283-175 � � � � � � � �L-38L283-176 � � � � � � � �L-38L283-177 � � � � � � � �L-38L283-178 � � � � � � � �L-38L283-180 � � � � � � � �L-38L283-181 � � � � � � � �L-38L283-182 � � � � � � � �L-38L283-198 � � � � � � � �L-37L283-199 � � � � � � � �L-37L283-263 � � � � � � � �L-8, L-26L460P � � � � � � � � � �L-19L462P � � � � � � � � � �L-19L463P � � � � � � � � � �L-19L464P � � � � � � � � � �L-19L480 � � � � � � � � � � �L-19L496P � � � � � � � � � �L-19L583-004 � � � � � � � �L-39L583-015 � � � � � � � �L-39L583-019 � � � � � � � �L-39L583-020 � � � � � � � �L-39L583-021 � � � � � � � �L-39L583-022 � � � � � � � �L-39L583-023 � � � � � � � �L-39L583-024 � � � � � � � �L-39L583-025 � � � � � � � �L-39L583-026 � � � � � � � �L-39L583-027 � � � � � � � �L-39L583-028 � � � � � � � �L-39L583-029 � � � � � � � �L-39L583-030 � � � � � � � �L-39L583-031 � � � � � � � �L-39L583-035 � � � � � � � �L-39L583-038 � � � � � � � �L-39L583-043 � � � � � � � �L-39L583-044 � � � � � � � �L-39L583-045 � � � � � � � �L-39L583-047 � � � � � � � �L-39L583-048 � � � � � � � �L-39L583-049 � � � � � � � �L-39L583-050 � � � � � � � �L-40L583-051 � � � � � � � �L-40L583-053 � � � � � � � �L-40L583-056 � � � � � � � �L-40L583-057 � � � � � � � �L-40L583-058 � � � � � � � �L-40L583-063 � � � � � � � �L-40L583-064 � � � � � � � �L-40L583-065 � � � � � � � �L-40L583-066 � � � � � � � �L-40L583-119 � � � � � � � �L-37L583-120 � � � � � � � �L-37L583-121 � � � � � � � �L-37L583-122 � � � � � � � �L-37L583-123 � � � � � � � �L-37L583-133 � � � � � � � �AL-13, L-37L583-153 � � � � � � � �CYL-31, CYL-38L583-156 � � � � � � � �L-40L583-174 � � � � � � � �L-40L583-187 � � � � � � � �L-33L583-192 � � � � � � � �L-40L583-195 � � � � � � � �CYL-37L583-196 � � � � � � � �L-40L583-197 � � � � � � � �CYL-31

L583-198 � � � � � � � �CYL-31L583-200 � � � � � � � �CYL-33L583-211 � � � � � � � �L-37L583-212 � � � � � � � �L-37L583-213 � � � � � � � �L-37L583-214 � � � � � � � �L-37L583-215 � � � � � � � �L-37L583-216 � � � � � � � �L-37L583-217 � � � � � � � �L-37L583-218 � � � � � � � �L-37L583-219 � � � � � � � �L-37L583-233 � � � � � � � �L-36L583-233-458 � � � �Keys-10L583-245 � � � � � � � �L-36L583-254 � � � � � � � �CYL-31, CYL-38L583-255 � � � � � � � �CYL-33, CYL-35,

CYL-38L583-286 � � � � � � � �L-40L583-290 � � � � � � � �L-40L583-291 � � � � � � � �L-40L583-321 � � � � � � � �L-40L583-322 � � � � � � � �L-40L583-363 � � � � � � � �L-23, L-26, L-27,

L-35, L-38L583-426 � � � � � � � �L-40L583-427 � � � � � � � �L-40L583-446 � � � � � � � �CYL-31L583-447 � � � � � � � �CYL-31L583-454 � � � � � � � �L-40, ND-15L583-468 � � � � � � � �L-40L583-474 � � � � � � � �CYL-3, CYL-31,

CYL-38L583-475 � � � � � � � �CYL-3, CYL-31,

CYL-38L583-476 � � � � � � � �CYL-31, CYL-38,

CYL-47, CYL-48L583-477 � � � � � � � �CYL-31, CYL-38,

CYL-47L583-481 � � � � � � � �L-40L583-485 � � � � � � � �L-40L583-490 � � � � � � � �L-40L583-492 � � � � � � � �L-40L583-494 � � � � � � � �L-40L583-496 � � � � � � � �L-40L583-497 � � � � � � � �L-37L583-498 � � � � � � � �L-37L583-499 � � � � � � � �L-37L583-500 � � � � � � � �L-37L583-501 � � � � � � � �L-37L583-502 � � � � � � � �L-37L583-503 � � � � � � � �L-37L583-504 � � � � � � � �L-37L9010 � � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9010B � � � � � � � � �L-28L9040 � � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9040B � � � � � � � � �L-28L9044 � � � � � � � � � �L-9, L-11, L-13,

L-17L9050LB � � � � � � � �L-28L9050P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17

L9056P � � � � � � � � �L-9, L-11, L-13, L-15, L-17

L9060P � � � � � � � � �L-9, L-11, L-13L9070LB � � � � � � � �L-28L9070P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9071P � � � � � � � � �L-9, L-11, L-13,

L-17L9076P � � � � � � � � �L-9, L-11, L-13,

L-15L9077P � � � � � � � � �L-9, L-11, L-13L9080LB � � � � � � � �L-28L9080P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9080PEL � � � � � � �L-9, L-11, L-13,

L-15, L-17L9080PEU � � � � � � �L-9, L-11, L-13,

L-15, L-17L9082P � � � � � � � � �L-9, L-11, L-13L9082PEL � � � � � � �L-9, L-11, L-13,

L-17L9082PEU � � � � � � �L-9, L-11, L-13,

L-17L9175 � � � � � � � � � �L-9, L-11, L-13,

L-15L9176 � � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9440 � � � � � � � � � �L-9, L-11, L-13,

L-15L9444 � � � � � � � � � �L-9L9453LB � � � � � � � �L-28L9453P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9456LB � � � � � � � �L-28L9456P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9457P � � � � � � � � �L-9, L-11, L-13L9458P � � � � � � � � �L-9, L-11, L-13L9460P � � � � � � � � �L-19L9462P � � � � � � � � �L-19L9463P � � � � � � � � �L-19L9464P � � � � � � � � �L-19L9465LB � � � � � � � �L-28L9465P � � � � � � � � �L-9, L-11, L-13,

L-15L9466P � � � � � � � � �L-9, L-11, L-13L9473LB � � � � � � � �L-28L9473P � � � � � � � � �L-9, L-11, L-13,

L-15L9480P � � � � � � � � �L-9, L-11, L-13,

L-15L9485P � � � � � � � � �L-9, L-11, L-13,

L-15, L-17L9486P � � � � � � � � �L-9, L-11L9496P � � � � � � � � �L-9, L-11, L-15,

L-17

MM204-152 � � � � � � �Keys-15M204-168 � � � � � � �Tool-3M204-198 � � � � � � �Tool-7M204-200 � � � � � � �Tool-3M204-201 � � � � � � �Tool-3

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-12

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

M504-271 � � � � � � �Keys-10, Tool-7M504-306 � � � � � � �Tool-7M504-347 � � � � � � �Tool-7M504-413 � � � � � � �Tool-7M504-424 � � � � � � �Tool-7M504-425 � � � � � � �Tool-7M504-426 � � � � � � �Tool-7M504-427 � � � � � � �Tool-7M504-428 � � � � � � �Tool-7M504-435 � � � � � � �Tool-5M504-439 � � � � � � �Tool-5M504-497 � � � � � � �Tool-9M540-000 � � � � � � �Tool-3, Tool-4M540-051 � � � � � � �Tool-3M540-056 � � � � � � �Tool-3MS-J175 � � � � � � � �Keys-18

NN123-007 � � � � � � �ND-15N123-008 � � � � � � �ND-15N123-009 � � � � � � �ND-15N123-010 � � � � � � �ND-15N123-011 � � � � � � �ND-15N123-012 � � � � � � �ND-15N123-013 � � � � � � �ND-15N123-017 � � � � � � �ND-14N123-020 � � � � � � �ND-16N123-021 � � � � � � �ND-15N123-022 � � � � � � �ND-15N123-024 � � � � � � �ND-15N123-025 � � � � � � �ND-15N123-028 � � � � � � �ND-14N123-032 � � � � � � �ND-15N123-034 � � � � � � �ND-14N123-035 � � � � � � �ND-14N123-040 � � � � � � �ND-16N123-043 � � � � � � �ND-15N123-045 � � � � � � �ND-15N123-054 � � � � � � �ND-15N123-055 � � � � � � �ND-15N123-056 � � � � � � �ND-15N123-057 � � � � � � �ND-15N123-059 � � � � � � �ND-15N123-062 � � � � � � �ND-11N123-064 � � � � � � �ND-14N123-065 � � � � � � �ND-14N123-066 � � � � � � �ND-14N123-067 � � � � � � �ND-14N123-068 � � � � � � �ND-14N123-069 � � � � � � �ND-14N123-097 � � � � � � �ND-15N523-000 � � � � � � �ND-14N523-001 � � � � � � �ND-14N523-002 � � � � � � �ND-12N523-013 � � � � � � �ND-15N523-014 � � � � � � �ND-15N523-015 � � � � � � �ND-15N523-016 � � � � � � �ND-15N523-017 � � � � � � �ND-15N523-018 � � � � � � �ND-15

N523-019 � � � � � � �ND-15N523-020 � � � � � � �ND-15N523-021 � � � � � � �ND-16N523-022 � � � � � � �CYL-11, CYL-14N523-023 � � � � � � �CYL-14N523-025 � � � � � � �ND-15N523-026 � � � � � � �ND-15N523-027 � � � � � � �ND-15N523-028 � � � � � � �ND-15N523-029 � � � � � � �ND-15N523-031 � � � � � � �ND-15N523-033 � � � � � � �ND-15N523-041 � � � � � � �ND-15N523-054 � � � � � � �ND-15N523-055 � � � � � � �ND-15N523-056 � � � � � � �ND-15N523-057 � � � � � � �ND-15N523-063 � � � � � � �ND-15N523-064 � � � � � � �ND-15N523-065 � � � � � � �ND-15N523-066 � � � � � � �ND-15N523-067 � � � � � � �ND-15N523-069 � � � � � � �ND-15N523-091 � � � � � � �ND-12, CYL-43N523-092 � � � � � � �ND-16N523-105 � � � � � � �ND-15N523-108 � � � � � � �Tool-7N523-123 � � � � � � �CYL-11N523-123 � � � � � � �CYL-14N523-124 � � � � � � �ND-14N523-127 � � � � � � �ND-12N523-146 � � � � � � �ND-14N523-147 � � � � � � �ND-14N523-148 � � � � � � �ND-14N523-149 � � � � � � �ND-15N583-133 � � � � � � �ND-16

PP513-023 � � � � � � �Tool-8P513-024 � � � � � � �Tool-8PL1001J � � � � � � � �PS-3PL1002J � � � � � � � �PS-3PL1003J � � � � � � � �PS-3PL2001J � � � � � � � �PS-3PL2002J � � � � � � � �PS-3PL2003J � � � � � � � �PS-3PL3001J � � � � � � � �PS-3PL3002J � � � � � � � �PS-3PL4001J � � � � � � � �PS-3PL4002J � � � � � � � �PS-3PL4003J � � � � � � � �PS-3

QQ330-165 � � � � � � �CYL-39Q330-252 � � � � � � �CYL-39 RR525-256 � � � � � � �B500-11

SS306-105 � � � � � � �S200-12

S306-106 � � � � � � �S200-12S306-135 � � � � � � �CYL-19S306-151 � � � � � � �S200-12S306-180 � � � � � � �S-10S306-182 � � � � � � �S-10S306-183 � � � � � � �S-10S605-064 � � � � � � �S200-12S605-192 � � � � � � �CYL-15S605-228 � � � � � � �CYL-14, CYL-15S605-231 � � � � � � �CYL-12, CYL-14S605-241 � � � � � � �AL-8, S-7, S200-8S605-242 � � � � � � �S-7, S200-8S605-289 � � � � � � �S200-12S605-297 � � � � � � �S200-12SM01-210 � � � � � � �Keys-23SM01-287 � � � � � � �Keys-23

TTR200A � � � � � � � � �CL-7TR201 � � � � � � � � � �CL-7TR202 � � � � � � � � � �CL-7TR203 � � � � � � � � � �CL-7

XXA10-594 � � � � � � �CYL-15XA11-297 � � � � � � �A-6, AL-7XB03-330 � � � � � � �B250-6XB03-418 � � � � � � �CYL-49XB03-427 � � � � � � �B250-6XB04-618 � � � � � � �CYL-49XB09-062 � � � � � � �B250-6XB09-195 � � � � � � �CYL-49XB09-795 � � � � � � �CYL-49XB11-475 � � � � � � �CYL-49XB11-638 � � � � � � �CYL-49XB11-720 � � � � � � �L-26, L-42XB11-789 � � � � � � �CYL-49XB11-790 � � � � � � �CYL-49XB11-825 � � � � � � �CYL-46XB11-916 � � � � � � �B600-11XB11-917 � � � � � � �B600-11XB11-918 � � � � � � �B600-11XB11-919 � � � � � � �B600-11XB11-920 � � � � � � �B600-11XB11-921 � � � � � � �B600-11XB11-922 � � � � � � �B600-11XB11-923 � � � � � � �B600-11XB11-958 � � � � � � �CYL-49XB12-046 � � � � � � �CYL-38, CYL-47XC03-069 � � � � � � �D-13, ND-16XC03-543 � � � � � � �D-7XC03-928 � � � � � � �D-7XC07-960 � � � � � � �D-7XC11-577 � � � � � � �D-7XK10-992 � � � � � � �L-42XL11-422� � � � � � � �L-26XL11-422� � � � � � � �L-42XL11-446� � � � � � � �L-26XL11-463� � � � � � � �L-26XL11-515� � � � � � � �L-42XL11-543� � � � � � � �L-26

Index

Index-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

Index

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-14

XL11-557� � � � � � � �L-26XL11-634� � � � � � � �L-42XL11-635� � � � � � � �L-26XL11-636� � � � � � � �L-42XL11-741� � � � � � � �L-26XL11-743� � � � � � � �L-26XL11-743� � � � � � � �L-42XL11-778� � � � � � � �L-42XL11-806� � � � � � � �Merch-3XL11-820� � � � � � � �L-20XL11-820� � � � � � � �L-42XL11-821� � � � � � � �L-20XL11-821� � � � � � � �L-42XL11-848� � � � � � � �L-42XL11-886� � � � � � � �L-26XL11-895� � � � � � � �CYL-31XL11-897� � � � � � � �L-26XL11-907� � � � � � � �L-26XL12-196� � � � � � � �L-42XN12-001 � � � � � � �ND-11XN12-002 � � � � � � �ND-11XN12-003 � � � � � � �ND-11XN12-004 � � � � � � �ND-11XN12-005 � � � � � � �ND-11XN12-006 � � � � � � �ND-11XN12-007 � � � � � � �ND-11XN12-012 � � � � � � �ND-16XN12-035 � � � � � � �ND-10XN12-035 � � � � � � �ND-12XN12-045 � � � � � � �ND-10, ND-12XN12-292 � � � � � � �ND-14XQ02-309 � � � � � � �D-13, ND-16 XQ02-309 � � � � � � �D-13XQ03-493 � � � � � � �B250-10XQ03-494 � � � � � � �D-13, ND-16XQ06-878 � � � � � � �Keys-12XQ07-351 � � � � � � �A-12, AL-13, ND-16XQ07-351 � � � � � � �B250-10, D-13,

S-10XQ11-804 � � � � � � �CYL-49XQ11-935 � � � � � � �CYL-31XQ11-947 � � � � � � �CYL-38XQ11-948 � � � � � � �CYL-38XQ11-949 � � � � � � �CYL-38

Part Number Page Number Part Number Page Number Part Number Page Number

Bold page numbers reflect pages with pricing

Index-15Price Book 74Effective March 4, 2013 • Rev. 3/13

Bold page numbers reflect pages with pricing

Notes

Notes

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-16

Notes

Index-17Price Book 74Effective March 4, 2013 • Rev. 3/13

Notes

Price Book 74Effective March 4, 2013 • Rev. 3/13

Index-18

Forms-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Introduction FORMS & EXAMPLES

Table of Contents Where to Send Orders . . . . . . . . . . . . . . Forms-1How To Order Forms-2 How to Determine Hand of Door . . . . . . Forms-2 How to Determine Hand of Parts (Handed Levers) . . . . . . . . . . . . . . . . . . . Forms-2Ordering Examples Forms-3Sample Letter of Authorization for Everest® Restricted Products Forms-4Order Forms Forms-6 Using Order Forms . . . . . . . . . . . . . . . . Forms-6 Sequential List of Order Forms . . . . . . . Forms-6

Where to Send Orders Type of Order Fax No. Mailing Address

Schlage Commercial 800-452-0665 Schlage Commercial Products 3899 Hancock Expressway Colorado Springs, CO 80911

E-mail: Order_Entry_Schlage_Commercial@irco .com

Fast Track 800-288-4242 866-I Call IR (866-422-5547)

Primus® / Primus XP 800-452-0665* Primus Ordering Processing Schlage Commercial 3899 Hancock Expressway Colorado Springs, CO 80911

Schlage Residential 800-366-5625 Schlage Residential Products 2119 E . Kansas City Road Olathe, KS 66061

* Primus facesheets and signature cards must be mailed to Primus Order Processing.

Note: 1) Failure to use the above fax numbers or mailing addresses will delay processing of your order.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Forms-2

How to Determine Hand of Parts (Handed Levers)

FORMS & EXAMPLES • How To Order

To order Schlage products, descriptive data should be in the same sequence as shown:

LINE OUTSIDE INSIDE DR ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILS

1 2 3 4 5 6 7 8 9 10 11 12 13 14

How to Determine Hand of Door

1. LINE ITEM: Line item number

2. QTY: Quantity

3. PRODUCT: Complete lock product or part number

4. OUTSIDE DES: Outside design code

5. OUTSIDE FIN: Outside finish code

6. INSIDE DES: Inside design code. Leave blank if same as outside design code.

7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.

8. HAND: Hand of door. Only one hand allowed per line item. Example: RH=Right Hand, LH=Left Hand, RR=Right Reverse, LR=Left Reverse.

9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL=Less Latch.

10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL=Less Strike.

11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138=1 3/8”, 214=2 1/4”, 212=2 1/2”.

12. EXT: Extension. Enter one of the following when doors 2” thick or greater are specified:

EE = Extended Equally

EI = Extended Inside

EO = Extended Outside

ED = Extended Differently

EI or EO assumes the latch will be centered on a 1 3/4” door, to which material has been added.

13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.

012 = 1/8” 118 = 1 1/8”

018 = 3/16” 114 = 1 1/4”

025 = 1/4” 138 = 1 3/8”

031 = 5/16” 112 = 1 1/2”

037 = 3/8” 158 = 1 5/8”

050 = 1/2” 134 = 1 3/4”

078 = 7/8” 200 = 2”

100 = 1” 400 = 4”

14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.

Forms-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Ordering Examples • FORMS & EXAMPLES

LINE OUTSIDE INSIDE DR ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILS One A or F-Series passage lock with a Georgian knob & rose in 609 on the outside and a Plymouth knob & rose in 605 on the inside, drive-in latch and strike.

1 1 A10S GEO 609 PLY 605 11-110 10-058

One D-Series classroom lock with Orbit interchangeable core knob for a 2 1/4˝ thick door, extended equally, E keyway. Also furnish one control key blank.

2 1 D70RD ORB 626 RH 214 EE 138 E-111111

3 1 35-056 E section

Two AL-Series entrance locks with Saturn levers in US 10B with knurling on the outside, tamper resistant screws and keyed alike.

4 2 AL53PD 8SA 613 SAT KA, Torx screws

One S-Series storeroom lock with Saturn levers in 612, four keys per lock.

5 1 S80PD SAT 612 4 keys total

6 2 50-215 Charge for extra cut keys

One L-Series passage lock with 05L 630 trim, with lead lined chassis.

7 1 L9010 05L 630 RH Lead lined per XL11-515

One B600-Series single cylinder deadbolt in US 26D outside, US 3 inside, less the strike, with construction core. No control or change keys.

8 1 B660T 626 LLL ICX

9 1 50-231 Handling Charge

One ND-Series lever lock in RHO 612, classroom function on the outside, storeroom on the inside. Construction and master keyed to new system. Furnish one master key and one construction master key.*

10 1 ND70x80PD RHO 612 Per XN12-006

11 1 49-101 Master Key

12 1 48-104 Construction Master key

13 2 50-210 Master keying charge (1/cyl)

14 2 50-211 Constr. keying charge (1/cyl)

One A-Series lock with an Orbit knob in US 3, entrance function, and Primus level 1 cylinder, CP keyway, 0-bitted, no keys.

15 1 A53LD ORB 605

16 1 20-724 606 122 Primus #000367, CP-000000, LKB

One mortise cylinder, 1 1/4˝ long, which will operate a Von Duprin exit device

17 1 20-001 626 114

One hotel function L-Series lock with 17B trim in 625, large bow change keys and one large bow emergency key, F section, 0-bitted. Left hand door.

18 1 L9485P 17B 625 LH F-000000, 35-141 Keys

19 2 50-228 Charge for large bow keys substituted for standard bow keys 20 1 35-101 F section

* Use Master Keyed order form and Key System Summary when ordering.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Forms-4

FORMS & EXAMPLES • Sample Letter of AuthorizationFor All Restricted Key Products

May 1, 2003

To: Schlage Dealer 100 East Avenue Dealer City, State 11111

RE: District 10, Jones Elementary School

Please consider this authorization to ship product for the above-referenced project .

Jones Elementary School is to be keyed using a new Everest 29 T Restricted Key System . For security reasons, we would like to have all keys for this facility shipped to a location other than the job site . Master keyed products, however, can be shipped directly to the site . This letter authorizes Schlage to ship our restricted products to the following addresses:

Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores Attn: Building Project Manager District 10 Schools 555 Main Street End User City, State 55555

Master Keys, Change Keys, Control Keys, and Key Blanks Attn: Locksmith District 10 Lockshop 1201 Fifth Avenue End User City, State 55555

These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility . We understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to add, remove, or change authorized shipping locations .

Sincerely,

End User RepresentativeFacilities Manager

Date - REQUIRED

Facility Name - REQUIRED

Dealer Name - RECOMMENDED

Include Registry Number &

Facility Code (stamped on keys)

for existing key systems

Authorized Ship-To Addresses -

REQUIRED

End UserRepresentative

Signature -REQUIRED

Letter may be mailed or faxed to SchlageSchlage Restricted Order Processing

3899 Hancock ExpresswayColorado Springs, CO 80911

District 10 Schools 555 Main StreetEnd User City, State 55555(555) 555-5555

End UserLetterhead - REQUIRED

DISTRICT 10

Forms-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Primus Checklist • FORMS & EXAMPLES

PRIMUS AND EVEREST 29 PRIMUS ORDERING CHECKLIST

TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS

IMPORTANT NOTES

To expedite processing of all Primus orders, it is highly recommended that Primus products be ordered separately

For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise Specified

For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified

PRIMUS EVEREST 29 PRIMUS

FOR LEVEL ONE 3 The Distributor’s Primus number MUST be provided3 The Sequence number MUST be provided

FOR LEVEL ONE PLUS

3 The Distributor’s Primus number MUST be provided3 The Sequence number MUST be provided3 The Locksmith number MUST be provided

FOR LEVEL TWO

3 The Dealer’s Primus number MUST be provided3 The Sequence number and/or Section MUST be Provided

FOR LEVELS THREE & FOUR

3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card3 An Original Facesheet MUST accompany all succeeding orders3 The Primus number MUST be indicated on the Facesheet3 ALL fields on the Facesheet MUST be completed where applicable

FOR LEVEL SEVEN

3 The Distributor’s Primus number MUST be provided3 The Locksmith’s Facility code MUST be provided3 The Keyway MUST be provided

FOR LEVEL EIGHT

3 The Distributor’s Primus number MUST be provided3 The Keyway MUST be provided

FOR LEVEL NINE

3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card3 An Original Primus Facesheet MUST accompany all succeeding orders3 The Primus number MUST be indicated on the Facesheet3 ALL fields on the Facesheet MUST be completed where applicable

All Primus Orders & Supporting Documentation Should be Sent To:Schlage

Attn: Primus Order Processing3899 Hancock Expressway

Colorado Springs, CO 80911

Price Book 74Effective March 4, 2013 • Rev. 3/13

Forms-6

FORMS & EXAMPLES • Order Forms

Using Order FormsWe recommend using the order forms included with this price bookwhen placing purchase orders for Schlage products . The following14 pages of order forms are available for copying prior to placing yourorder . Bulk supplies of blank forms are also available upon request .Contact Customer Service to order bulk supplies of forms . Specifyform number .

Sequential List of Order Forms Form Rev Total Available on Description Number Date Pages www.schlage.com Non-MasterKeyedOrderForm,FirstPage MS-I250 2/01 1page •

Non-MasterKeyedOrderForm,AdditionalPage MS-I300 2/01 1page •

MasterKeyedOrderForm,FirstPage MS-I100 3/12 1page •

MasterKeyedOrderForm,AdditionalPage MS-I150 3/12 1page •

KeySystemSummary MS-I200 3/12 5pages •

QuickKey SC-5236 - 1pages •

Primus®Facesheet MS-E120 6/09 1page •

Primus®SignatureCard MS-E130 8/05 1page •

QU

OT

E #

P

RIC

E B

OO

K #

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

MA

RK

CA

RT

ON

S:

AC

CO

UN

T N

O.

P.O

. NO

.

D

AT

E

OR

DE

R W

RIT

TE

N B

Y

FO

R F

UR

TH

ER

INF

OR

MA

TIO

N, C

ON

TA

CT

:

Nam

e:

Pho

ne:

Fax

:

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

OU

TS

IDE

INS

IDE

HA

ND

DE

SD

ES

FIN

LA

TC

HS

TR

IKE

DR

TH

KE

XT

DIM

AD

DIT

ION

AL

DE

TA

ILS

LIN

E

ITE

MQ

TY

PR

OD

UC

TF

IN

No

n-M

aste

r K

ey

ed

OR

DE

R

Use

for

Key

Sec

tion

and

Bitt

ing

Info

rmat

ion,

KA

Gro

ups,

Prim

us®

No.

, Loc

ksm

ith ID

No.

, etc

.

Pag

e 1

of

11

2In

gers

oll-R

and

250

OU

TS

IDE

INS

IDE

HA

ND

DE

SD

ES

FIN

LA

TC

HS

TR

IKE

DR

TH

KE

XT

DIM

AD

DIT

ION

AL

DE

TA

ILS

LIN

E

ITE

MQ

TY

PR

OD

UC

TF

INU

se fo

r K

ey S

ectio

n an

d B

ittin

g In

form

atio

n,K

A G

roup

s, P

rimus

® N

o., L

ocks

mith

ID N

o., e

tc.

© 2

001

Inge

rsol

l-Ran

d

MS

-30

0N

on

-Mas

ter

Key

ed O

rder

Ad

d’l

Pag

e

Acc

ount

No.

P

.O. N

o.

Pag

e o

f

IR

ev. 2

/01

MA

ST

ER

KE

YE

D O

RD

ER

This

form

mus

t b

e at

tach

ed t

o th

e

MA

STE

R K

EY

SY

STE

M S

UM

MA

RY

FO

RM

Ple

ase

pro

vid

e as

com

ple

te a

nd a

ccur

ate

as p

ossi

ble

so

we

can

pro

vid

e w

hat

you

need

for

your

Key

Sys

tem

Exc

el S

oft

cop

y -

Prin

t In

stru

ctio

ns:

To a

void

prin

ting

mor

e sh

eets

tha

n ne

eded

, Sel

ect

<P

rint>

, fro

m t

he p

rint

scre

en s

elec

t <

Prin

t ra

nge>

, the

n se

lect

<

Pag

es>

from

___

to__

_& c

lick

OK

.

Quot

e #:

Acco

unt N

o.:

P.O.

#:

Ship

ping

Inst

ruct

ions

:M

ark

Cart

ons:

Date

:

Orde

r Writ

ten

By:

Cust

omer

Nam

e an

d Ad

dres

s:Sh

ip to

:

For F

urth

er In

form

atio

n Co

ntac

t:Na

me:

Phon

e:Fa

x:

Page

1 o

f ___

MS-

I100

Item

s Or

dere

dOU

TSID

E

HAND

(O

nly

one

hand

per

lin

e ite

m)

INSI

DELA

TCH

STRI

KEEn

ter d

oor

thic

knes

s if

not

stan

dard

Ente

r w

hen

door

th

ickn

ess

is g

reat

er/

equa

l to

2˝

Dim

ensi

on

for m

ortis

e cy

linde

r,

bloc

king

rin

g, e

tc.

ADDI

TION

AL D

ETAI

LSLo

ck D

etai

lsDE

SIGN

FINI

SHDE

SIGN

FINI

SH

Key/

Labe

l Ins

truct

ions

QTY

Head

ing

DOOR

#KE

YSy

mbo

l(s)

MK

Sym

bol(s

)LI

NE IT

EMQT

YPR

ODUC

TDR

THK

EXT

DIM

Page

2 o

f ___

MS-

I150

Item

s Or

dere

dOU

TSID

E

HAND

(O

nly

one

hand

per

lin

e ite

m)

INSI

DELA

TCH

STRI

KEEn

ter d

oor

thic

knes

s if

not

stan

dard

Ente

r w

hen

door

th

ickn

ess

is g

reat

er/

equa

l to

2˝

Dim

ensi

on

for m

ortis

e cy

linde

r,

bloc

king

rin

g, e

tc.

ADDI

TION

AL D

ETAI

LSLo

ck D

etai

lsDE

SIGN

FINI

SHDE

SIGN

FINI

SH

Key/

Labe

l Ins

truct

ions

QTY

Head

ing

DOOR

#KE

YSy

mbo

l(s)

MK

Sym

bol(s

)LI

NE IT

EMQT

YPR

ODUC

TDR

THK

EXT

DIM

1 of 5 MS-I200

MASTER KEYSYSTEM SUMMARY

This form must be attached to theMaster Key Order form and P .O .

Please provide as complete and accurate aspossible so we can provide what you need for

your Key System .

o New

o If Existing (provide info below)

Registry # __________________________________________

Structure or Factory Order # _____________________________________

o Attached Dealer Specified combinations

Construction Keyed Type o Yes o No

Full Size Construction Cores o ICA o ICB o ICC

(Schlage Only)

Small Format Construction Cores o Brown o Green

Construction Keyed

Falcon o CK (BOK) o Lost Ball

Schlage o CK (Split) o RCK ( 5-Pin C only )

Type

o 5-pin o 6-pin o 7-pinSee compatibility chart on page 5

Stamp Details

o With Industry Standard

o Non-standard Code (Specify)

Keyway Specify **: ____________________________________

Stamping Location

o Plug Face (N/A in Primus) - VKCo Concealed (N/A in Falcon STD) - CKC

** = The Commercial Master Key Department makes the final

decision in the selection of key sections

Select System

Falcon

oStandard

oSchlage C

oRestricted *

oInterchangeable Core A2

oInterchangeable Core A4

Schlage

oClassic

oClassic Primus *

oEverest 29 R Family-Small Format IC *

oEverest 29 S Family - Open

oEverest 29 T Family *

oEverest 29 Primus *

* = Attach required documentation

Job Name

AddressCity / State

Country

For detailed instructions on how to complete this form please refer to pages 4 & 5

1. System Overview

2. Cylinders

2 of 5 MS-I200

3. Keys

4. Key Quantities

Type

oStandard Bow oStandard Bow oAccess Bow oLarge Bow Unembossed (Schlage Only)

Stamp Details

oKeyset Symbol oDo Not Duplicate oWith Custom Die _________________________ (DND) (Specify)

Non-standard Code (Specify) ____________________________________________________________________________________

Change Key Packaging and Shipping InstructionsPack Keys Independently (PKI) of Lock or Cylinder ***

oYes oNo

If PKI, ship change keys to

oDealer oOther

oSee Primus Facesheet

Level Qty . Per Master Key Symbol (s) Total Quantity

GGM

GM

MK or RMK

Control

Emergency

Others

Special Function Qty . Per Qty . Per

RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only)

CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only)

Extractor Tools **** Small Format Construction Core Keys

Small Format Construction Core Control Keys

Change Keys

No . of Keys per Cylinder

No . of Keys per Symbol **** = Used with Construction Keying

*** = Furnished standard at no charge with split-key construction keying

3 of 5 MS-I200

5. Master Key Future Expansion

6. Operating Instructions(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)

List Future MK Symbols

Example:MK………………… oBJ, BK o40 each

GGM o o

GM o o

MK o o

MK o o

MK o o

MK o o

Others o o

Cross Keyed is operated by Cylinder these change keys

X

X

X

X

X

X

X

X

X

X

X

X

Cross Keyed is operated by Cylinder these change keys

X

X

X

X

X

X

X

X

X

X

X

X

Approx . # of Change Key Symbols Under Each Future MK

3 3

4 of 5 MS-I200

7. Instructions and Compatibility

General Information

If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer Service prior to placing the order:Tel . 1-877-671-7011Fax 1-800-452-0663

• Only one structure may be ordered on the same purchase order • Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families • Classic Primus refers to Primus Obverse and Primus Quad key section families

Section 1: System Overview

Full Size Construction Cores • Schlage only

Small Format Construction Cores • 7-pin only for Schlage • 6- and 7-pin for Falcon

CK (Split) • 6-pin for Schlage and Falcon • Split key construction keying is not available for Classic Primus or Everest 29 Primus

RCK (Lost Ball) • 5-pin (C keyway) only for Schlage • 5-, 6-, and 7-pin for Falcon

System Selection • Refer to the compatibility chart

Section 2: Cylinders

Type • For cylinder type refer to the compatibility chart

Keyway (specify) • Schlage Commercial’s default key section for new Master Key Systems is Everest 29 S 145

Section 3: Keys

Stamp Details • Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys • For custom die, attach RFQ approval for Schlage

5 of 5 MS-I200

Section 4: Key Quantities

Level • Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems)

Special Function • Construction keys are not furnished unless specified

Change Keys • Unless otherwise specified 2 change keys are furnished per lock or cylinder

Section 5: Master Key Future Expansion • Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols

Section 6: Operating Instructions • Cross keying reduces the security and expansion of key systems • Unless otherwise specified, keyin master keys will operate cross-keyed cylinders

5 Pin 6 Pin 7 PinSplit

KeyBlock O-Key

Lost Ball

Tempe Core

A2 A4 0.025 0.018

Schlage

Classic X X X X X

Everest 29 S X X X

Everest 29 T X X X

Everest 29 R X X X

Classic Primus (XP) X X

Everest 29 Primus (XP) X X

Falcon

Open X X X X X X

Restricted X X X X X

Schlage C X X

SFIC Open X X X X X

SFIC Restricted X X X X X

Compatibility Chart

SC-5236

LINEITEM QTY PRODUCT KEYWAY FINISH DESCRIPTION Lead Time NOTES

35-100 N/A Classic Key Blank 5 Pin * 10 Days 35-101 N/A Classic Key Blank 6 Pin 10 Days 35-056 N/A Classic Key Blank Control 10 Days 35-002 N/A Everest Conventional Do Not Duplicate 5 Days (Everest D requires Letter of Authorization) 35-009 N/A Everest Conventional Standard (Not available in Everest D) 5 Days 35-003 N/A Everest Conventional Control 5 Days (Everest D requires Letter of Authorization) 35-157 N/A Classic Primus Standard -Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-157-XP N/A Classic Primus XP Standard -Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-158 N/A Classic Primus Control-Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number, 5 Days Level 1+ requires primus number & Locksmith ID. 35-158-XP N/A Classic Primus XP Control-Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-004 N/A Everest Primus Standard-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number, Level 7 5 Days requires Primus number & locksmith ID. 35-004-XP N/A Everest Primus XP Standard-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number, Level 7 5 Days requires Primus number & locksmith ID. 35-005 N/A Everest Primus Control-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number. Level 7 requires 5 Days Primus number & locksmith ID. 35-005-XP N/A Everest Primus XP Control-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number. Level 7 5 Days requires Primus number & locksmith ID. 35-310 N/A Best Key Section Key Blanks 10 Days 35-401 N/A Everest B SFIC Key Blanks Embossed-Requires Letter of Authorization 5 Days 35-021 N/A Everest B SFIC Key Blanks Unembossed-Requires Letter of Authorization 5 Days 48-401 N/A Everest B SFIC Cut Key Embossed-Requires Letter of Authorization 5 Days 48-021 N/A Everest B SFIC Cut Key Unembossed-Requires Letter of Authorization 5 Days 49-401 N/A Everest Cut Key Embossed-Master--Requires Letter of Authorization 5 Days 49-022 N/A Everest Cut Key unembossed-Master--Requires Letter of Authorization 5 Days 49-356 N/A Everest Cut Key Embossed-Control--Requires Letter of Authorization 5 Days 49-022 N/A Everest Cut Key unembossed-Control--Requires Letter of Authorization 5 Days 80-036 Everest SFIC Uncombinated Cores-Requires Letter of Authorization Please provide keying schedule and master key summary form if 5 Days ordering master keyed products. 80-037 Everest SFIC Combinated Cores-Requires Letter of Authorization. Please provide keying schedule and master key summary form if 5 Days ordering master keyed products.

QUOTE# PRICE BOOK#

ACCOUNT NO. P.O. NUMBER

Fax: (800) 452-0665E-mail: Order Entry Schlage Commercial@irco.comMail: Schlage Order Entry 3899 Hancock Expressway Colorado Springs, CO 80911

DATE

SHIP TO:

SHIPPING INSTRUCTIONS QUICK KEY ORDER REQUESTED SHIP DATE

ORDER WRITTEN BY

NAME:

PHONE:

FAX:

Customer: #REF! P.O # Information

FOR MORE INFORMATION, CONTACT:

IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:

29

MS-E120

© 2009 Ingersoll RandMS-E120 Rev. 6/09

Ingersoll Rand Security Technologies

Schlage

Attn.: Primus Order Processing

3899 Hancock Expressway

Security, CO. 80911

PRIMUS SECURITY LEVEL:

PROJECT INFORMA TION

Project Name (please print or type)

Street Address (no P .O. Box)

City State Zip Code

AUTHORIZED OWNER SIGNA TURE(S): If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authorit y able to control other signers on this form.

1.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

2.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

3.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

4.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

5.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

Level 3, 4, and 9 Order Authorization

Signature Card PRIMUS ®

THIS SIGNA TURE CARD EST ABLISHES AUTHORIZA TION TO PURCHASE ADDITIONAL PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED A T THE ADDRESS BELOW .

— OVER —

For Internal Use Only

Primus# Order#

G/Z/E S/M

THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER – F AXED COPIES NOT ACCEPT ABLE –

3U (no exclusivity) 4Z (time exclusivity)

3G (2-digit zip exclusivity) 4N (nationwide exclusivity)

C l a s s i c K e y w a y s

9U (no exclusivity) 9Z (time exclusivity)

9G (2-digit zip exclusivity) 9N (nationwide exclusivity)

E v e r e s t 2 9 K e y w a y s

MS-E130

DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)

Dealer or Locksmith Account # Primus #

Dealer or Locksmith Company Name

Phone Number Fax Number

Contact 1 (Please print or type)

Contact 1 Signature

Owners Authorization By (Please print or type)

SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signatureauthorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibilityfor validating the owner’s signature as identified on the Primus Signature Card before orderingthe material.

SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasingadditional Primus product or duplicating keys.

Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letterrequesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributorsand Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax ofthis card will not be accepted.

Please mail the original copy to: IR SchlageAttn.: Master Key Control Department2315 Briargate Parkway, Suite 700Colorado Springs, CO 80920

– FAXED COPIES WILL NOT BE ACCEPTED –

© 2002 Ingersoll-RandMS-E130 Rev. 8/05

Effective From:Date Date

to

Owners Authorization Signature Date

Address (no P.O. Box)

Contact 2 (Please print or type)

Contact 2 Signature

City State Zip Code

Schlage Attn: Master Key Control Department

3899 Hancock ExpresswayColorado Springs, CO 80911

A-1Price Book 74Effective March 4, 2013 • Rev. 3/13

AIntroduction

Table of ContentsFunctions A-2Complete Locks A-3Options A-4 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . A-5 Primus®/ Primus XP . . . . . . . . . . . . . . . . A-5 Non-Standard Door Thickness . . . . . . . A-6 Locks Less Components. . . . . . . . . . . . . A-6 Tamper Resistant Torx® Screws . . . . . . . A-6 Special Options . . . . . . . . . . . . . . . . . . . . A-6Parts A-7 Knobs and Levers, Standard . . . . . . . . . A-7 Knobs and Related Parts, Interchangeable Core . . . . . . . . . . . . . . . A-7 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . A-8 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8 Accessories and Adapters . . . . . . . . . . . A-9 Backset Links and Reinforcements . . . . A-9 Miscellaneous Parts . . . . . . . . . . . . . . . A-10 Plunger Units . . . . . . . . . . . . . . . . . . . . . A-11 Dimension Chart: Plunger Units . . . . . A-11 Screws . . . . . . . . . . . . . . . . . . . . . . . . . A-12 Screw Packs, Standard . . . . . . . . . . . . A-12 Screw Packs, Torx® . . . . . . . . . . . . . . . A-12 Special Parts. . . . . . . . . . . . . . . . . . . . . A-12

Complete Cylinders See Cylinders Section

How To Order Forms & Examples

Product Identification

A 53 P D

Latch Suffix D = Deadlatch S = Springlatch Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core

Function

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US 11) Aged Bronze

Standard Features*

Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1” x 2 1/4”, Square corner faceplate, 7/8” housing diameter, 1/2” throwStrike 1 1/8” x 2 3/4”, Square corner, T-strike, boxBackset 2 3/8”Cylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/8” – 1 7/8”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in S keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

A-2

A • Functions

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed Locks Keyed Locks

SCHLAGE ANSI

A10S F75 A53PD F109Passage LatchBoth knobs always unlocked.

A25D Exit LockBlank plate outside. Inside knobalways unlocked. Specify door thickness.

A70PD F84 Classroom LockOutside knob locked and unlocked by key. Inside knob always unlocked.

A79PD Communicating Lock With Blank PlateLocked or unlocked by key fromoutside. Blank plate inside.

A80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.

A30D F77 Patio LockPush-button locking. Turning insideknob or closing door releases button, preventing lock-out.

A40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlockedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.

A43D F79 Communicating LockTurn-button in outer knob locks andunlocks knob and inside thumbturn.

A85PD * F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency master keyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatoractivated.

A170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

Entrance LockTurn/push-button locking; pushingand turning button locks outside knob, requiring use of key until button is manually unlocked. Push- button locking; pushing button locks outside knob until unlocked by key or by turning inside knob.

* 85 function locks are not available in Full Size or Small Format Interchangeable Cores.

A-3Price Book 74Effective Month/Day, 2013 • Rev. 4/13

A-Series Complete Locks • A

Georgian (GEO)

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) Split finish not available on A25D, A43D, A79PD. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

* LEV lever is available as inside trim only on deadlatching functions.

Levon (LEV) * Orbit (ORB) Plymouth (PLY) Tulip (TUL)

A-Series

Function Description

Designs and Finishes

ORB PLYOnly Plymouth is

available in 629 or 630

TUL GEO LEV**Only available as inside trim and with the following functions: A10, A25, A40S. Not available with a cylinder.

626

605 609 619 625 643e

613630

626 605 609

6136 Additional Leadtime

606 609 625 PLY only629

GEO only630 606 609 625

Dummy Trim

A170 Single Dummy $57 $69 $81 $60 $72 $84

Keyless

A10S Passage

$112 $124 $136 $145 $157 $169A25D** Exit** Specify door thickness

A40S Privacy

A30D Patio$151 $163 $175 $190 $202 $214

A43D Communicating

Keyless and Keyed, Single Locking

A53PD Entrance

$200 $212 $224 $235 $247 $259A70PD Classroom

A80PD Storeroom

A79PD*** Communicating*** Not available for LEV $230 $242 $254 $270 $282 $294

A85PD**** Faculty restroom

**** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately

Price Book 74Effective March 4, 2013 • Rev. 3/13

A-4

A • Options Latches, Strikes

11-068Standard

11-085Standard

11-104 41-005

Latches Specify Add to Hsg Lock Backset Description Dia Springlatch Deadlatch Price Square corner, 1” x 2 1/4”, standard 7/8” 11-068 11-085 2 3/8” 1/4” Radius round corner, 1” x 2 1/4” 11-069 11-088 Circular, drive-in, 605 and 626 finish only 1” 11-110 11-104 Square corner, 1” x 2 1/4” 7/8” 11-111 11-091 N/C 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 11-112 11-092 Square corner, 1 1/8” x 2 1/4”, standard for 2 3/4” backset 11-116 11-096 Circular, drive-in, 605 and 626 finish only 1” 11-113 11-105 3 3/4” Square corner, 1 1/8” x 2 1/4” 11-118 11-103 $10.60 5” Backset extension link 7/8” 41-005* 16.50

* Backset extension link 41-005 must be used with 2 3/8” backset latches. Link 41-005 requires reinforcement when used in metal doors. See A Parts: Backset Links and Reinforcements. Link 41-005 installed in 1” latch holes require one G506-815 sleeve. See A Parts: Accessories and Adapters. ** This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

10-001Standard

10-004 10-025 10-026 10-058

Strikes Add to Lock Description Lip Length Specify PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 1 1/8” 10-001 N/CSquare corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 1 1/2”, 10-001 $5.60 1 3/4”, 2”1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-004 N/C

ANSI, no box, 1 1/4” x 4 7/8” 1 3/16” 10-025 N/C 1 3/8”, 1 1/2” 10.60 Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-026 N/C1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-027Circular, adjustable, 1 3/4” diameter, 605 and 626 finish only 1 7/32” 10-058

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Notes: 1) For Electric Strike options, reference the System Accessories section of the Schlage Electronics Price Book. 2) Strikes with long lip lengths are sold as parts. See A Parts: Special Parts.

A-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable Core, Full Size Construction Core,Locks Less Components Options • A

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is not available for Faculty Restroom function (A85). 3) Full size interchangeable core is available with ORB design only.

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: A53RD ORB $28.00

Full size construction core** T suffix Add to Lock Price Example: A53TD ORB 28.00

Less full size core J suffix Deduct from Example: A53JD ORB Lock Price 25.00

Note: 4) Primus is not available for Faculty Restroom function (A85).

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyLCylinders.A-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder separately. See Cylinders. Example: 1 ea. A53LD 1 ea. 20-724A-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus corecylinder separately. See Cylinders: Interchangeable Core. Example: 1 ea. A70JD 1 ea. 20-740

Orbit (ORB)

Price Book 74Effective March 4, 2013 • Rev. 3/13

A-6

A • Options Non-Standard Door Thickness, Primus®, Torx® Screws,

Special Options

Non-Standard Door Thickness Description Specify Add to Lock PriceExtended Inside (EI), 2” thru 2 1/2” Door thickness and how door is extended. Example: 2 1/2”, EI

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch and strike screws Torx screws $13.90

Note: 1) Locks with non-standard door thickness are available extended inside (EI) only.

Special Options6 Extended Factory Lead Time Not subject to standard discount terms Specify Description Lock Function “X” Number Add to Lock Price A53PD with restoring slide A53PD XA11-297 $36.20

$47.20

* Chassis for non-ORB design is furnished unless ORB design is specified.

Locks Less Components Deduct from Description Specify Lock PriceLess each knob LLL for knob design $7.00 Example: A53PD LLL/PLY x PLYLess each rose or turn LLL for rose design 5.60 Example: A53PD PLY x PLY/LLLLess standard cylinder L suffix 48.00 Example: A53LDLess indicator cylinder L suffix 71.00Faculty Restroom function (A85) Example: A85LDLess springlatch LLL for latch 9.00 Example: A40S PLY 605 LLL 10-004Less deadlatch LLL for latch 15.10 Example: A53PD PLY 626 LLL 10-025Less strike LLL for strike 3.30 Example: A53PD PLY 612 11-096 LLL Lock chassis only* Less all possible components Sum of applicable Example: A53LD LLL 626 LLL LLL deducts, use PLY design for base price.

A-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Lock Trim: Knobs, Levers, Knobs and Related Parts,Interchangeable Core, Roses Parts • A

Knobs and Levers, Standard Designs and Finishes GEO LEV ORB PLY TUL 605 606 609 Part 612 613 Number Description 626 625 63001-008 Closed knob or lever $27.10 $30.10 $35.10 01-009 Open knob or lever 27.10 30.10 35.10 01-018 Cylinder knob and sleeve 38.90 41.90 46.90 01-081 Sleeve for cylinder knob 7.70 7.70 7.70

* Design and finish not required.

* Not available for 01-001 ORB

Knobs and Related Parts, Interchangeable Core Designs and Finishes ORB 605 606 Part 612 Number Description 626 625 61301-026 Full size core knob $53.40 $56.40 $61.4001-053* Full size core driver and retainer 9.50A501-941* Full size core retainer 3.10C604-307* Full size core driver, universal 6.90

Note: 1) Use TUL design sleeve for GEO and PLY (except PLY 630).

Roses Designs and Finishes PLY TUL GEO (use for LEV) (use for ORB) 605 609 Part 612 613 Number Description 626 625* 63001-001 Outside Rose $19.60 $22.60 $27.60 01-002 Inside Rose

Price Book 74Effective March 4, 2013 • Rev. 3/13

A-8

A • Parts Latches, Strikes

11-068 11-085 11-088 11-104

Latches Part Number Specify Hsg Price Springlatch Deadlatch Finish Backset Description Dia Each 11-068 11-085 • Square corner, 1” x 2 1/4”, standard 7/8” 11-069 11-088 • 2 3/8” 1/4” Radius round corner, 1” x 2 1/4” 11-110 11-104 • 1” Circular drive-in, 605 and 626 only 1” 11-111 11-091 • Square corner, 1” x 2 1/4” 7/8” $43.60 11-112 11-092 • 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 11-116 11-096 • Square corner, 1 1/8” x 2 1/4” 1” 11-113 11-105 • 1” Circular drive-in, 605 and 626 only 11-118 11-103 • 3 3/4” Square corner, 1 1/8” x 2 1/4” 1” 46.90 39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 39.80

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

* Specify lip length when ordering.

10-001 10-004 10-025 10-042 10-058

Strikes Specify PricePart Number Finish Description Lip Length Each10-001* • Square corner, T-strike, box, 1 1/8” x 2 3/4”, standard 1 1/8” $8.0010-001* • Square corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 11.20 1 1/2”, 1 3/4”, 2”10-004 • 1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 8.60

10-025* • ANSI, no box, 1 1/4” x 4 7/8” 1 3/16” 13.10 1 3/8”, 1 1/2” 33.00K510-066 Box for ANSI strike — 5.4010-026 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.7010-027 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.7010-042 • Electric strike, 1 1/4” x 4 7/8”, 606 and 626 only — 212.0010-058 • Circular, adjustable, 1 3/4” diameter, 605 and 626 only 1 7/32” 11.10

A-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Accessories and Adapters,Backset Links and Reinforcements Parts • A

38-018 A501-878 G506-815

* Specify door thickness, includes A501-567 and A501-565 or A501-566.

Accessories and Adapters Part Specify Price Number Finish Description Each38-018 • Thin door extension ring (2 required per lock) $9.50A501-878 Faceplate adapter to adapt 1” faceplate to 1 1/8” door preparation Order in multiples of 100 0.54G506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.60

41-005 A501-565 A501-567

Backset Links and Reinforcements Part Price Number Description Each37-001* Metal door reinforcer kit, fits both 7/8” and 1” diameter housings $28.5041-005 5” Backset extension link 16.50A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors. 14.40 Fits both 7/8” and 1” diameter housings.A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors. 14.40 Fits both 7/8” and 1” diameter housings.A501-567 3 1/2” Long latch housing sleeve used to reinforce joint between latch and backset link or to hold 8.90 latch in metal doors.G506-815 1” Long latch housing sleeve to adapt 7/8” housing to 1” bore 5.60

Notes: 1) 5” Backset extension links installed in 1” latch holes require G506-815 sleeve to join latch and link. 2) Links installed in metal doors require reinforcement.

Price Book 74Effective March 4, 2013 • Rev. 3/13

A-10

A • Parts Miscellaneous Parts

Miscellaneous Parts Part Specify Price Number Finish Description Each A201-330 • Non-threaded chassis, less knob & rose - A170 $32.40 A201-370 Cam & driver - A80 7.20 A201-377 Mounting plate, ins. (except A43, A79) 7.30 A201-399 • Hub & cap, out. (except A10, A25, A40, A43) 23.40 A201-406 • Hub & cap, out. - A10, A40, A43 23.40 A201-558 • Rose, out. - A25 39.80 A201-684 • Threaded chassis, less knob & rose - A170 32.40 A201-688 • Turn unit, ins. - A43 39.80 A301-386* Spindle & catch, ins. (except A43, A79) 7.30 A301-387 Spindle & catch, out. (except A25, A43) 7.30 A301-391* Cam unit - A30 7.30 A301-402 Cam unit, out. - A40, A53, A85 7.30 A301-403 • Housing & cap, 1 3/8” thru 1 7/8” door (except A43, A79) 8.70 A301-404 • Housing & cap, 1 7/8” thru 2 1/4” door, EI (except A43, A79) 8.70 A301-405 • Housing & cap, 2 1/4” thru 2 1/2” door, EI (except A43, A79) 8.70 A301-406 • Threaded housing & cap, ins. (except A43, A79) 8.80 A301-409* Spindle, 1 7/8” thru 2 1/4” door, EI (except A43, A79) 30.10 A301-410* Spindle, 2 1/4” thru 2 1/2” door, EI (except A43, A79) 30.10 A500-001 Spindle, ins, 2” thru 2 1/4” door, EI - A43 12.30 A500-002 Spindle, ins., 2 1/2” door, EI - A43 12.30 A501-167 Threaded rod for mounting A170s as double dummy set 12.20 A501-305 Hub plate, ins. (except A79) 5.70 A501-498 Hub, 1 3/8” door - A25 8.60 A501-499 Hub, 1 3/4” door - A25 8.70 A501-615 Spindle wedge - A80, A85 5.40 A501-633 Spindle, ins. - A43 6.30 A501-710 Swivel sleeve - A85 (except ORB design) 5.50 A501-721 Cam plug - A70, A79 16.50 A501-766 • Rose, ins. - A79 35.70 A501-767 Mounting plate - A79 5.50 A501-768 Hub plate, ins. - A79 5.50 A501-791 Cam & plug spacer - A70, A79 3.40 A501-874 Hub plate, out. - A25 8.60 A501-901 Plate, out. - A80, A85 3.80 A508-399 Plate, out. (except A25, A80, A85) 7.40 A508-597** Spring separator (except A10, A25, A40, A43) 5.50 A700-017 Spiral cam - A70, A79 8.10

* Parts that are not directly interchangeable with locks manufactured before 1984. ** Parts that require frame A508-598.

A-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts (continued), Plunger Units Parts • A

Miscellaneous Parts (cont’d) Part Specify Price Number Finish Description Each A508-598 Frame $8.70 A508-600 Housing - A43, A79 12.10 A508-605 Slide spring 5.50 A508-640 Spacer, ORB knob 6.00 A508-641 Slide stop - A43 22.20 A590-158* Slide, restoring - A30, A85 5.50 A590-159 Slide, non-restoring - A43, A53, A70, A79, A80 5.50 A590-180 Slide, restoring - A40 5.50 A590-181 Slide, non-restoring - A10, A25 5.50 C503-008 Cotter pin Order in multiples of 100 0.46 G570-232 Plug, spindle, lever designs only - A10 9.50

* Parts that are not directly interchangeable with locks manufactured before 1984.

Note: 1) Specify dimension for all plunger units. See chart below for dimensions.

Note: 2) Specify part number, finish, and dimension. Example: 01-060 626 Dim = 360, inside plunger unit for A53 PLY 626, 1 3/8” – 1 7/8” door.

Plunger Units Part Specify Price Number Finish Description Each01-055 • Plunger unit, ins. - A30 01-056 • Plunger unit, ins. - A4001-057 • Plunger unit, out. - A40 $11.7001-058 • Plunger unit, out. - A4301-060 • Plunger unit, ins. - A5301-063 • Plunger unit, ins. - A85 25.70

Dimension Chart: Plunger Units Part Number Design Door Range Dim Number Design Door Range Dim 1 3/8” – 1 7/8” 360 01-058 Non-ORB 1 3/8” – 2 5/8”, EI 281 Non-ORB over 1 7/8” – 2 1/4”, EI 424 ORB 34901-055 over 2 1/4” – 2 1/2”, EI 449 1 3/8” – 1 7/8” 36301-056

1 3/8” – 1 7/8” 428 Non-ORB over 1 7/8” – 2 1/4”, EI 42701-060 ORB over 1 7/8” – 2 1/4”, EI 492 01-063 over 2 1/4” – 2 1/2”, EI 452

over 2 1/4” – 2 1/2”, EI 517 1 3/8” – 1 7/8” 431

01-057 Non-ORB 1 3/8” – 2 1/2”, EI 070 ORB over 1 7/8” – 2 1/4”, EI 497 ORB 135 over 2 1/4” – 2 1/2”, EI 520

Price Book 74Effective March 4, 2013 • Rev. 3/13

A-12

A • Parts Screws, Standard Screw Packs,

Torx® Screw Packs, Special Parts

Screws Price Each (Order in Part Specify multiples Number Finish Description Door Thickness Type Size of 100)A501-161 Mounting, All from 1 3/8” – 1 7/8” POH Mach 10-32 x 1 1/8” $0.74 (except A43, A79)A501-769 Mounting, A79 from 1 3/8” – 2” POMH 1-way 10-32 x 1 1/8” 0.90A501-770 Mounting, A79 over 2” – 2 3/4”, EI POMH 1-way 10-32 x 2” 0.92A501-818 Mounting, All from 2” – 2 1/2”, EI POH Mach 10-32 x 2 1/16” 0.84 (except A43, A79)A508-649 • Mounting, A43 from 1 3/8” – 1 7/8” Torx screw (T-20) 10-32 x 1 1/8” 1.70A508-650 • Mounting, A43 from 2” – 2 1/2”, EI Torx screw (T-20) 10-32 x 2” 1.70C603-256 • ANSI strike — PFH Combo 12-24 x 1” 0.74C603-897 • Latch or standard strike — PFH Combo 8-32 x 3/4” 0.88 Mounting, A170

Screw Packs, Standard Part Specify Number Finish Description Contents Price EachA201-811 • Mounting, latch and strike (2) A501-161 $6.20 (except A43, A170) (4) C603-897A201-812 • Mounting, A170 (3) C603-897 4.70A201-814 • Mounting, A43 (2) A508-649 3.60

Screw Packs, Torx®

Part Specify Number Finish Description Contents Price EachC203-311 • Latch and standard strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $15.30 (2) L583-371 (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Number Finish Description Price EachXQ07-351* • 10-025 Strike, 7/8” flat lip $21.60 10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”, 1 3/8” and 1-1/2”) 105.00

* Specify lip length.

AL-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Introduction AL

Table of ContentsFunctions AL-2Complete Locks AL-3Options AL-4 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-4 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-4 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . AL-5 Small Format Interchangeable Core Small Format Construction Core . . . . . . . AL-5 Locks Less Components . . . . . . . . . . . . . AL-6 Non-Standard Door Thickness . . . . . . . . . AL-6 Primus® / Primus XP . . . . . . . . . . . . . . . . . AL-6 Tactile Warning . . . . . . . . . . . . . . . . . . . . . AL-7 Tamper Resistant Torx® Screws . . . . . . . . AL-7 Special Options . . . . . . . . . . . . . . . . . . . . . AL-7Parts AL-8 Levers, Standard . . . . . . . . . . . . . . . . . . . . AL-8 Levers and Related Parts, Interchangeable Core . . . . . . . . . . . . . . . . AL-8 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-8 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-9 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-9 Accessories and Adapters . . . . . . . . . . . AL-10 Backset Links and Reinforcements . . . . AL-10 Miscellaneous Parts . . . . . . . . . . . . . . . . AL-11 Parts for 2” Doors . . . . . . . . . . . . . . . . . . AL-12 Plunger Units . . . . . . . . . . . . . . . . . . . . . . AL-12 Hub, Frame and Housing Kits. . . . . . . . . AL-12 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . AL-13 Screw Packs, Standard . . . . . . . . . . . . . AL-13 Screw Packs, Torx® . . . . . . . . . . . . . . . . . AL-13 Special Parts . . . . . . . . . . . . . . . . . . . . . . AL-13Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification AL 53 P D

Latch Suffix D = Deadlatch S = Springlatch

Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core B = Less SFIC BDC = Disposable SFIC G = Everest 29 Patented SFIC H = Construction SFIC

Function

Lock Series

SFIC = Small Format (Best® Style) Interchangeable Core

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze 613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AM Antimicrobial Coating on Satin Chromium

643e (US11) Aged Bronze

Standard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1/2” throwStrike 1 1/4” x 4 7/8”, ANSI, Square corner, no boxBackset 2 3/4”Cylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/8” – 1 7/8”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-2

AL • Functions

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed Locks Keyed Locks

AL10S F75

SCHLAGE ANSI

Passage LatchBoth levers always unlocked.

AL25D Exit LockBlank plate outside. Inside leveralways unlocked. Specify door thickness.

AL40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlocked from outside with small screwdriver, not included. Turning inside lever or closing door releases button.

AL44S Hospital Privacy LockPush-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button.

AL170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

AL50PD F82 Entrance/Office LockPush-button locking. Push-buttonlocks outside lever until unlockedwith key or by rotating inside lever.

AL53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside leverrequiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsidelever until unlocked by key or byturning inside lever.

AL70PD F84 Classroom LockOutside lever locked and unlocked bykey. Inside lever always unlocked.

AL80PD F86 Storeroom LockOutside lever fixed. Entrance by keyonly. Inside lever always unlocked.

AL85PD * F93 Faculty Restroom Lock(with Indicator Cylinder)Outside lever fixed. Entrance by keyonly. Push-button in inside leveractivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside lever orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatoractivated.

* 85 function locks are not available in Full Size or Small Format Interchangeable Cores.

SCHLAGE ANSI

AL-3Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-Series Complete Locks • AL

Jupiter (JUP)

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) Split finish not available on AL25D. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

AL-Series Lever Styles JUP NEP SAT OME Finishes 626 605 606 613 612 619 625 643e Additional LeadtimeFunction Description 609KeylessAL10S Passage $156 $168 $186 AL25D* Exit 170 $182 $200 * Specify door thickness AL40S Privacy 177 189 207AL44S Hospital privacy AL170 Single dummy 89 95 105KeyedAL50PD Entrance/Office AL53PD Entrance $226 $238 $256 AL70PD ClassroomAL80PD StoreroomAL85PD** Faculty Restroom Lock ** Faculty Restroom function locks are furnished 0-bitted with 261 273 291 two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately

Neptune (NEP) Omega (OME) Saturn (SAT)

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-4

AL • Options Latches, Strikes

11-096Standard

11-088 11-104

Latches Hsg Specify Add to Backset Description Dia Springlatch Deadlatch Lock Price Square corner, 1” x 2 1/4” 7/8” 11-068 11-085 2 3/8” 1/4” Radius round corner, 1” x 2 1/4” 11-069 11-088 Circular, drive-in, 605 and 626 finishes only 1” 11-110 11-104 Square corner, 1” x 2 1/4” 7/8” 11-111 11-091 N/C 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 11-112 11-092 Square corner, 1 1/8” x 2 1/4”, standard 11-116 11-096 Circular, drive-in, 605 and 626 finishes only 1” 11-113 11-105 3 3/4” Square corner, 1 1/8” x 2 1/4” 11-118 11-103 $10.60 5” Backset exension link 7/8” 41-005* 16.50

* Backset extension link 41-005 must be used with 2 3/8” backset latches. Link 41-005 requires reinforcement when used in hollow metal doors. See AL Parts: Backset Links and Reinforcements. Link 41-005 installed in 1” latch holes require one G506-815 sleeve. See AL Parts: Accessories and Adapters. ** This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

Notes: 1) For Electric Strike options, reference the System Accessories section of the Schlage Electronics Price Book. 2) Strikes with long lip lengths are sold as parts. See AL Parts: Special Parts.

10-025Standard

10-001 10-027 10-058

Strikes Description Lip Length Specify Add to Lock Price 1 1/8” N/CSquare corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 10-001 $11.20 1 1/2”, 1 3/4”, 2” 1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-004 N/CANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 10-025 N/CANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 10-025 12.20Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-026 N/C1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-027Circular, adjustable, 1 3/4” diameter, 605 and 626 finishes only 1 7/32” 10-058

Shaded items are standard components and arefurnished with locks unless otherwise specified.

AL-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable Core,Small Format Interchangeable Core Options • AL

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: AL53RD SAT $28.00Full size construction core** T suffix Add to Lock Price Example: AL53TD SAT 28.00Less full size core J suffix Deduct from Example: AL53JD SAT Lock Price 25.00

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

* Key symbol must be specified. Everest B and Everest 29 R Family keyways are restricted. See Terms & Conditions for more information.

** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is not available for Faculty Restroom function (AL85). 3) Full size interchangeable core is not available with Omega lever.

Notes: 4) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying. 5) Small format interchangeable core is not available for Faculty Restroom function (AL85). 6) Small format interchangeable core is not available with Omega lever. 7) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Small Format Interchangeable CoreSmall Format Construction Core Add to Lock Price Description Specify (per core)Everest® patented core* G Suffix $59.00 Example: AL53GD SATSmall format construction core** H Suffix 32.00 Example: AL53HD SATLess small format core B Suffix N/C Example: AL53BD SATSmall format disposable core BDC Suffix N/C Example: AL53BDC SAT

Jupiter (JUP) Neptune (NEP) Saturn (SAT)

Jupiter (JUP) Neptune (NEP) Saturn (SAT)

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-6

AL • OptionsLocks Less Components,

Non-Standard Door Thickness, Primus®

Locks Less Components Deduct from Description Specify Lock PriceLess each lever LLL for lever design $7.70 Example: AL53PD LLL/RHO x SATLess each rose LLL for rose design 9.60 Example: AL53PD SAT x SAT/LLLLess standard cylinder L suffix 48.00 Example: AL53LDLess cylinder, Faculty Restroom L suffix 71.00function (AL85) Example: AL85LDLess springlatch LLL for latch 9.60 Example: AL40S SAT 605 LLL 10-004Less deadlatch LLL for latch 15.60 Example: AL53PD SAT 626 LLL 10-025Less strike LLL for strike 3.70 Example: AL53PD SAT 612 11-096 LLLLock chassis and spring cages only Less all possible components Sum of applicable Example: AL53LD LLL 626 LLL LLL deducts

Non-Standard Door Thickness Description Specify Add to Lock PriceExtended Equally (EE), over 1 7/8” – 2” Door thickness and how door is extended 4.00 Example: 2”, EE

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. SeeTerms & Conditions for more information. Description SpecifyAL-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder separately. See Cylinders. Example: 1 ea. AL50LD 1 ea. 20-728AL-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus corecylinder separately. See Cylinders: Interchangeable Core. Example: 1 ea. AL80JD 1 ea. 20-740

Note: 1) Primus is not available for Faculty Restroom function (AL85).

AL-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Antimicrobial Coating, Tactile Warning, Torx® Screws, Special Options Options • AL

Note: 1) Outside lever only has tactile warning unless otherwise specified.

Tactile Warning

(SAT lever shown)

Tactile Warning Add to Lock Price Description Specify (per lever)Tactile Warning Preface the design code with 8 $34.20Available only on Sat design Example: 8SA for SAT

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch and strike screws Torx screws $15.30

Special Options6 Extended Factory Lead Time Not subject to standard discount terms Specify Description Lock Function “X” Number Add to Lock PriceAL50PD or AL53PD with restoring slide AL50PD or AL53PD XA11-297 $36.20

6 Extended Factory Lead Time

Finish: 626AM Description of Components Coated Add to Lock Price Rose Trim Inside: Lever, Rose Outside: Lever, Rose $28.00

Antimicrobial Coating

Ordering notes for Antimicrobial Coatings: 1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. 2) Please specify 626AM on each line item requiring antimicrobial coating. 3) For ease of identification, a sticker will be applied to a non-visible location on product.

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-8

AL • Parts Lock Trim: Levers, Levers and Related Parts, Roses

Levers, Standard Designs and Finishes JUP NEP OME SAT 605 606 612 619 625 Part 626 Additional Leadtime 613 Number Description 60951-021 Closed lever* 51-023 Open lever*

$62.80 $65.80 $70.80 51-025 Closed lever** 51-026 Open lever**

Levers and Related Parts, Interchangeable Core Designs and Finishes JUP NEP SAT 605 Part 606 612 Number Description 626 619 625 61351-022 Full size core lever $53.40 $56.40 $61.4001-126* Full size core driver and retainer 9.80S605-241* Full size core retainer 3.20A700-052* Full size core driver, universal 6.9051-024** Small format core lever and lever insert 59.00 62.00 67.00A700-021* Small format core retainer 5.40C604-381* Small format core throw member 6.20D500-000*** Small format core spacer 1.10

Roses Designs and Finishes RHO OME (use for JUP, (use for OME NEP & SAT designs) designs) 605 606 612

619 625 Part Additional Leadtime Number Description 626 609 61304-060 Rose $70.70 $73.70 $78.70

* Design and finish not required. ** Also available in 609 finish. *** 2 spacers required for 6-pin, 1 spacer required for 7-pin.

* For locks manufactured before June 2003. * * For locks manufactured after June 2003.

Note: 1) To convert locks from full size to small format, chassis components are required in addition to small format core levers, retainers and throw members. 2) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

AL-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Latches, Strikes Parts • AL

11-068 11-088 11-096 11-104 11-116

Latches Part Number Specify Hsg Price Springlatch Deadlatch Finish Backset Description Dia Each 11-068 11-085 • Square corner, 1” x 2 1/4” 7/8” 11-069 11-088 • 2 3/8” 1/4” Radius round corner, 1” x 2 1/4” 11-110 11-104 • 1” Circular drive-in, 605 and 626 finishes only 1” 11-111 11-091 • Square corner, 1” x 2 1/4”

7/8” $43.60

11-112 11-092 • 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 11-116 11-096 • Square corner, 1 1/8” x 2 1/4”, standard

1” 11-113 11-105 • 1” Circular drive-in, 605 and 626 finishes only 11-118 11-103 • 3 3/4” Square corner, 1 1/8” x 2 1/4” 1” 46.90 39-030* • — Rabbeted latch and strike kit, 605 and 626 finishes only — 42.10

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

* Specify lip length.

10-001 10-025 10-027 10-058

Strikes Part Specify Price Number Finish Description Lip Length Each 1 1/8” $8.0010-001* • Square corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 11.20 1 1/2”, 1 3/4”, 2”10-004 • 1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 8.60

10-025* • ANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 12.30

ANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 33.00K510-066 Box for ANSI strike — 5.4010-026 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.7010-027 • 1/4” Radius corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.7010-058 • Circular, adjustable, 1 3/4” diameter, 605 and 626 finishes only 1 7/32” 11.10

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-10

AL • PartsAccessories and Adapters,

Backset Links and Reinforcements

A501-878

41-005

G506-815

A501-565 A501-567

Accessories and Adapters Part Price Number Description EachA501-878 Faceplate adapter to adapt 1” faceplate to 1 1/8” door preparation Order in multiples of 100 $0.54 G506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.60

Backset Links and Reinforcements Part Price Number Description Each37-001* Metal door reinforcer kit, fits both 7/8” and 1” diameter housings $28.5041-005 5” Backset extension link 16.50A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors. 14.40 Fits both 7/8” and 1” diameter housings.A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors. 14.40 Fits both 7/8” and 1” diameter housings.A501-567 3 1/2” Long latch housing sleeve used to reinforce joint between latch and backset link or to 8.90 hold latch in metal doorsG506-815 1” Long latch housing sleeve to adapt 7/8” housing to 1” bore 5.60

* Specify door thickness, includes A501-567 and A501-565 or A501-566.

Notes: 1) 5” Backset extension links installed in 1” latch holes require one G506-815 sleeve to join latch and link. 2) Links installed in metal doors require reinforcement.

AL-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts Parts • AL

Note: 1) A700-039 and A700-041 (Driver and Driver Cap) should be ordered together.

Miscellaneous Parts Part Specify Price Number Finish Description Each A100-053 Spring cage, ins. - 4 prong for locks manufactured after May 2002 $48.70 A100-054 Spring cage, out. - 4 prong for locks manufactured after May 2002 48.70 A201-370 Cam - AL80 7.20 A301-402 Cam - AL40, AL50, AL53, AL85 7.30 A501-167 Threaded rod for mounting AL170s as double dummy set 12.20 A501-305 Hub plate, ins. 5.70 A501-311 Slide spring 5.50 A501-615 Spindle wedge - AL80, AL85 5.40 A501-721 Cam plug - AL70 16.50 A501-791 Cam spacer - AL70 3.40 A501-874 Hub plate, out. - AL25 8.60 A501-901 Hub plate, out. - AL80, AL85 3.80 A508-597 Spring seat - AL50, AL53, AL70, AL80, AL85 5.50 A590-158 Slide - AL85 5.50 A590-159 Slide - AL50, AL53, AL70, AL80 5.50 A590-180 Slide, restoring - AL40 5.50 A590-181 Slide, non-restoring - AL10, AL25 5.50 A700-003 Spindle sleeve - AL85 5.50 A700-004 Hub plate, out. (except AL25, AL80, AL85) 5.50 A700-014 Hub, out. - AL70 - for locks manufactured after May 2003 24.60 A700-015 Lever insert, 1 3/8” - 1 7/8” doors - for locks manufactured before May 2002 5.20 A 700-016 Hub, out., 1 3/8” – 1 7/8” doors - AL25 24.60 A700-017 Spiral cam - AL70 8.60 A700-036 Spring - AL40, AL44 7.30 A700-039 Driver, 1 3/8” - 1 7/8” doors - for locks manufactured after May 2002 15.10 A700-041 • Driver cap, 1 3/8” - 1 7/8” doors - for locks manufactured after May 2002 3.20 A700-044 Lever insert, 1 3/8” - 1 7/8” doors - for locks manufactured after May 2002 5.20 A700-045 Lever insert for SFIC 4.90 A700-046 Hub, 1 3/8” - 1 7/8” doors - for locks manufactured after May 2003* 4.80 A700-047 Interchangeable core lever insert, 1 3/8” - 1 7/8” doors 5.20 A700-056 Frame, hub - for locks manufactured after May 2003 8.70 A700-057 Housing - for locks manufactured after May 2003 8.70 A710-001 Spindle & catch, out. (except AL10, AL40) 7.20 A710-004 Spindle & catch, ins. 7.20 A710-007 Spindle & hub - AL170 22.40 A710-008 Small Format Interchangeable Core spindle & catch, outside - AL50, AL53, AL70, AL80 18.90 A710-020 Spindle & catch, out. - AL10, AL40 7.20 C503-308 Anchor spring (except AL25) 5.50 C604-273 Rose pin - AL25 1.20 C604-354 Castle nut 12.90 C604-400 Mounting plate - AL170 16.30 C604-402 • Blank rose - AL25 70.30

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-12

AL • PartsParts for 2” Doors, Plunger Units,

Hub, Frame and Housing Kits

Parts for 2” Doors Part Specify Price Number Finish Description Each A700-043 • Driver, 2” door $52.50 A700-028 Hub, 2” door, for inside and outside - for locks manufactured after May 2003* 24.60 A700-029 Hub, out., 2” doors - AL70 - for locks manufactured after May 2003* 30.50 A700-030 Hub, out., 2” doors - AL25 30.50 A700-033 Full size interchangeable core lever insert, 2” door 5.20 A700-034 Lever insert, 2” door 5.20

Plunger Units Part Specify Price Number Finish Description Each 51-037 • Plunger unit, ins. - AL53 51-038 • Plunger unit, ins. - AL85 51-039 • Plunger unit, ins. - AL40, AL44, AL50 $12.00 51-040 • Plunger unit, out. - AL40 51-041 • Plunger unit, out. - AL44

Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003 Part Door Price Number Function Thickness Contents Each A700-048

All 1 3/8” - 1 7/8” (2) A700-032 Chassis screws (1) A700-056 Frame, hub $63.40

(except AL25 (2) A700-046 Hub (1) A700-057 Housing A700-050 and AL70) 2” (2) A700-032 Chassis screws (1) A700-056 Frame, hub (2) A700-028 Hub (1) A700-057 Housing (2) A700-032 Chassis screws (1) A700-056 Frame, hub A700-049 1 3/8” - 1 7/8” (1) A700-046 Hub (1) A700-057 Housing 65.00 (1) A700-014 Hub AL70 (2) A700-032 Chassis screws (1) A700-056 Frame, hub A700-051 2” (1) A700-028 Hub (1) A700-057 Housing (1) A700-029 Hub

* For locks manufactured before May 2003, see AL: Hub, Frame and Housing Kits.

AL-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Screws, Standard Screw Packs, Torx® Screw Packs, Special Parts Parts • AL

Screws Price Each Part Specify (Order in Number Finish Description Type Size multiples of 100) A501-171 • Washer, thru bolt - AL170 — — $0.84 A501-746 • Mounting, thru bolt - AL170 POH Mach 1/4”-20 x 2 1/2” 0.84 A700-032 Chassis PFH Cross Recess 10-32 x 3/8” 0.84 C603-256 • ANSI strike PFH Combo 12-24 x 1” 0.74 C603-897 • Latch and strike PFH Combo 8-32 x 3/4” 0.88 C604-395 Spring cage screws PFH Mach 8-32 x 2 1/8” 1.20 L583-133 Mounting surface - AL170 Sheet metal #8 x 1” 4.00

Screw Packs, Standard Part Specify Price Number Finish Description Contents EachB202-517 • Latch and strike (4) C603-897 $5.90C203-736 • ANSI strike (2) C603-256 4.80C303-438 Spring cage screws (2) C604-395 3.50C303-029 • Mounting (4) C603-897 12.00 (2) C604-395 (2) C603-256 (1) M504-271C303-421 • Mounting, AL170 (1) A501-167 8.80 (1) A501-171 (1) A501-746 (2) L583-133 (1) M504-271

Screw Packs, Torx®

Part Specify Price Number Finish Description EachC203-311 • Latch and strike (4) C503-766 (T-15) C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $15.30 (2) L583-371 (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Price Number Finish Description Each

XQ07-351* • 10-025 Strike, 7/8” flat lip $21.60 10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”, 1 3/8”, and 1 1/2”) 105.00

* Specify lip length.

Price Book 74Effective March 4, 2013 • Rev. 3/13

AL-14

AL Notes

B250-1Price Book 74Effective March 4, 2013 • Rev. 3/13

B250Introduction

Table of ContentsFunctions B250-2Complete Locks B250-3Options B250-4 Deadlatches . . . . . . . . . . . . . . . . . . . . . . B250-4 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-4 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . B250-5 Locks Less Components . . . . . . . . . . . . B250-5 Non-Standard Door Thickness . . . . . . . . B250-5 Tamper Resistant Screws and Torx® Screws . . . . . . . . . . . . . . . . . . . . . . B250-6 Special Options . . . . . . . . . . . . . . . . . . . . B250-6Parts B250-7 Deadlatches . . . . . . . . . . . . . . . . . . . . . . B250-7 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-8 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . B250-8 Door Reinforcements . . . . . . . . . . . . . . . B250-8 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . B250-9 Screw and Tailpiece Packs . . . . . . . . . . . B250-10 Special Parts . . . . . . . . . . . . . . . . . . . . . B250-10Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification B2 50 P D X

Screw Suffix X = Cross Recess Head Mounting Screws

Latch Suffix D = Deadlatch

Cylinder Suffix P = 5-Pin Cylinder P6 = 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core

Function

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated

Standard Features*Certification ANSI/BHMA Certified A156.5-2001, Grade 2 auxiliary lock. Latch 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 9/16” throw deadlatchStrike 1 1/8” x 2 3/4”, Square corner, T-strike, boxBackset 2 3/8”Cylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 1/2” – 1 3/4” standard cylinder, 1 1/2” - 2 1/8” interchangeable core cylinderKeys Two nickel silver cut keys per lock, 6-pin, S123 section**Trim Rings 7/16” and 1/8” Wrought brass or bronze, reinforced with security inserts

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-2

B250 • Functions

ANSI/BHMA Certified A156.5-2001, Grade 2 auxiliary lock.

SCHLAGE ANSI

Bored Deadlatch Locks

B250PD E0122 Single Cylinder Deadlatch (Night Latch)Deadlocking latchbolt retracted bykey from outside or by inside turnunit. Rotating turn unit and activatinghold-back feature keeps latchretracted.

B252PD E0112 Double Cylinder Deadlatch*Deadlocking latchbolt retracted bykey from either side. No hold-backfeature.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

B250-3Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-Series Complete Locks • B250

Outside Cylinder Trim

Notes: 1) Split finishes are priced at the highest finish price. 2) 6-Pin cylinders are available at no extra charge. Specify P6 suffix. Example: B250PD6. 3) Specify door thickness for 6-pin cylinders used in 1 3/8” thick doors. 4) Keying options: see Keys & Keying. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) Locks are not available less standard cylinder 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Inside Cylinder Trim Rose and Turn

B250-Series Finishes 626 605 613 6Additional Leadtime 606 609 Function Description 612 625Keyed, Single Cylinder FunctionsB250PD* Single cylinder outside, holdback turn inside $156 $162 $172 * Available without holdback feature. See Special Options for detailsKeyed, Double Cylinder Functions

Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. B252PD Double cylinder $220 $226 $236

Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-4

B250 • Options Deadlatches, Strikes

12-100Standard

10-001Standard

10-004 10-025

Deadlatches Hsg Add to Backset Description Dia Specify Lock Price 2 3/8” Square corner, 1 1/8” x 2 1/4”, standard 1” 12-100 N/C 2 3/4” Square corner, 1 1/8” x 2 1/4” 12-103

Strikes Lip Add to Description Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 1 1/8” 10-001 N/CSquare corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 10-001 $5.40 1 1/2”, 1 3/4”, 2”1/4” Radius round corner, T-strike, box, 1 18” x 2 3/4” 1 1/8” 10-004 N/C

ANSI, no box, 1 1/4 x 4 7/8” 1 3/16” 10-025 5.40 1 3/8”, 1 1/2” 10.80Box for ANSI strike, must be specified — K510-066 N/C

Note: 1) For Electric Strike options, reference the System Accessories section of the Schlage Electronics Price Book.

Shaded items are standard components and arefurnished with locks unless otherwise specified.

B250-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeble Core, Locks LessComponents, Non-Standard Door Thickness Options • B250

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: B250RD $28.00Full size construction core** T suffix Add to Lock Price Example: B250TD 28.00Less full size core J suffix Deduct from Example: B250JD Lock Price

25.00

Locks Less Components Deduct from Description Specify Lock PriceLess deadlatch LLL for latch $15.20 Example: B250PD 605 LLL 10-001Less strike LLL for strike 4.60 Example: B250PD 605 12-100 LLL

Non-Standard Door Thickness Description Specify Add to Lock PriceOver 1 3/4” – 2 1/4” Door thickness N/COver 2 1/4” – 2 3/4” Door thickness $75.30

Note: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.

Note: 2) Locks are not allowed to be ordered less standard cylinder (i.e., L suffix).

Note: 3) For doors over 2 3/4”, see Special Options.

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-6

B250 • Options Torx® Screws, Special Options

Note: 1) For parts specials, see B250 Parts: Special Parts.

Tamper Resistant Screws and Torx® Screws Add to Description Specify Lock PriceCross recessed mounting screws and drive pins for X suffix N/CB250PD Example: B250PDXLatch and strike screws Torx screws $14.00

Special Options6 Extended Factory Lead Time Not subject to standard discount terms Specify Add to Description Lock Function “X” Number Lock Price B250PD for doors over 2 3/4” – 5 9/16” B250PD XB03-330* $85.60B252PD for doors over 2 3/4” – 5 9/16” B252PD XB03-427* 103.00B250PD less holdback (substitutes B400 turn) B250PD XB09-062 25.60

* Specify door thickness.

B250-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadlatches, Strikes Parts • B250

12-100 39-030

Deadlatches Part Specify Hsg Price Number Finish Backset Description Dia Each12-100 • 2 3/8” Square corner, 1 1/8” x 2 1/4”, standard 1” $63.8012-103 • 2 3/4” Square corner, 1 1/8” x 2 1/4”39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 42.10

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

10-001 10-004 10-025

Strikes Part Specify Price Number Finish Description Lip Length Each10-001* • Square corner, box, T-strike, 1 1/8” x 2 3/4”, standard 1 1/8” $8.0010-001* • Square corner, box, T-strike, 1 1/8” x 2 3/4” 1”, 1 1/4”, 11.20 1 1/2”, 1 3/4”, 2”10-004 • 1/4” Radius round corner, box, T-strike, 1 1/8” x 2 3/4” 1 1/8” 8.60

10-025* • ANSI, no box, 1 1/4” x 4 7/8” 1 3/16” 12.30 1 3/8”, 1 1/2” 33.00C603-623 Box for T-strike — 0.50K510-066 Box for ANSI strike — 5.40

* Specify lip length.

Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-8

B250 • Parts Trim, Adapters, Door Reinforcements

38-031 38-032

Adapters Price Each (per finish) Part Specify Number Finish Description Contents 626 605 61338-016 • Adapter ring kit for double cylinder locks used in (2) 38-031 $21.10 $23.10 $25.10 2 1/8” hole38-017 • Adapter ring kit for single cylinder locks used in (1) 38-031 and 28.20 $30.20 32.20 2 1/8” hole (1) 38-03238-031 • 2 1/2” Diameter adapter ring for 2 1/8” door prep for — 17.80 $19.80 21.80 under cylinder38-032 • 2 7/8” Diameter adapter ring for 2 1/8” door prep for — 17.80 $19.80 21.80 under turn units/blank roses.

A501-566

Door Reinforcements Part Price Number Description EachA501-565 Reinforcer for 1 3/8” thick nonreinforced metal doors, fits both 7/8” and 1” diameter housings $14.40 (2 required per lock)A501-566 Reinforcer for 1 3/4” thick nonreinforced metal doors, fits both 7/8” and 1” diameter housings 14.40 (2 required per lock)

Note: 2) For trim rings and inserts, see Cylinders: B250.

B202-671 B202-672

Trim Part Specify Price Number Finish Description EachB202-671 • Rose and turn without holdback $36.60B202-672 • Rose and turn with holdback 55.40B502-711 Support (anchor) for turn mounting screws - B270 3.80B502-815 • Blank inside rose, exposed screws - B251, 20.90 available 605 and 626 finshes only

B250-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Screws Parts • B250

Screws Description Application Price Each Part Specify (Order in Number Finish Size Type Use with: Door Thickness multiples of 100)Single Cylinder, B250PD 7/16” & 1/8” trim rings 5-Pin 1 5/16” – under 1 11/16”B520-086 • 10-32 x 2 1/4” 7/16” trim ring 1 11/16” – 1 15/16” (2) 1/8” trim rings 6-Pin 1 5/16” – under 1 7/16” POH 7/16” & 1/8” trim rings 1 7/16” – 1 13/16” machine 7/16” trim ring 5-Pin over 1 15/16” – 2 1/4” $0.76 1/8” trim ring over 2 1/4” – 2 9/16” B520-087 • 10-32 x 2 5/8” 7/16” & 1/8” trim rings over 1 13/16” – 1 15/16” 7/16” trim ring 6-Pin over 1 15/16” – 2 9/16” 1/8” trim ring over 2 9/16” – 2 3/4”Double Cylinder, B252PD 7/16” & 1/8” trim rings 1 5/16” – under 1 11/16”B520-267 10-32 x 2 1/2” 7/16” trim ring 5-Pin 1 11/16” – 1 15/16” 1/8” trim ring 2 7/16” – 2 11/16” 7/16” & 1/8” trim rings over 1 7/16” – under 1 11/16” 7/16” trim ring 5-Pin over 1 15/16” – under 2 7/16”B520-268 10-32 x 2 3/4” Cross 1/8” trim ring over 2 11/16” – 2 7/8” recess 7/16” & 1/8” trim rings 1 7/16” – under 1 9/16” $1.70 7/16” trim ring 6-Pin over 1 11/16” – 2 3/16” 1/8” trim ring over 2 11/16” – 2 13/16” (4) 1/8” trim rings 1 3/16” – under 1 7/16”B520-269 10-32 x 3” 7/16” & 1/8” trim rings 6-Pin 1 9/16” – 1 15/16” 7/16” trim ring over 2 13/16” – 2 11/16” 1/8” trim ring over 2 13/16” – 3 1/8”B520-271 • Drive pin — — 0.76Interchangeable Core, Single Cylinder, B250RD

B520-086 • 10-32 x 2 1/4” 1” & 1/8” trim rings 1 5/16” – 1 1/2” POH 1” trim ring over 1 1/2” – 2 1/8” machine 1” trim ring over 2 1/8” – 2 3/8” $0.76 B520-087 • 10-32 x 2 5/8” 7/16” & 1/8” trim rings over 2 3/8” – 2 5/8” 7/16” trim ring over 2 5/8” – 3 1/8”Interchangeable Core, Double Cylinder, B252RD 1” & 1/8” trim rings 15/16” – 1 5/8”

B520-269 10-32 x 3” 1” trim ring over 1 5/8” – 2 1/8” Cross 7/16” & 1/8” trim rings over 2 1/8” – 2 3/8” $1.70 recess 1” trim ring over 2 3/8” – 2 5/8”B520-271 • Drive pin — — 0.76All FunctionsC603-256 • 12-24 x 1” PFH ANSI strike — $0.72C603-897 • 8 x 3/4” combo Latch and strike — 0.88

Price Book 74Effective March 4, 2013 • Rev. 3/13

B250-10

B250 • PartsStandard Screw and Tailpiece Packs,

Torx® Screw Packs, Special Parts

Screw and Tailpiece Packs, Standard Price Each Part Specify (Order in Number Finish Door Thickness Contents multiples of 100)Single Cylinder, B250PDB202-509 • 1 3/8” – 1 3/4” (1) B202-558 $6.70 (2) B520-086 Double Cylinder, B252PDB202-560 • 5-Pin: 1 1/2” – 1 3/4”, 2 1/2” (2) B202-370 (2) B202-580 (2) B520-267 (2) B520-271 $13.40

B220-043 • 6-Pin: 1 5/8”, 1 3/4”, 3” (2) B202-369 or 1 3/8”, 1 3/4”, 2 1/4”, 2 1/2”, 2” (2) B520-269Latch & Strike Screws, All Functions, Standard (T) Strike

B202-517 • Latch and strike screws, all functions (4) C603-897 $5.90

Note: 1) Tailpieces can be purchased separately: see Cylinders: B250.

Note: 2) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Screw Packs, Torx®

Price Each Part Specify (Order in Number Finish Description Contents multiples of 100)C203-311 • Latch and strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $15.30 (2) L583-371 (T-20)

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Price Each Part Specify (Order in Number Finish Description multiples of 100)XQ07-351* • 10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”,1 3/8” and 1 1/2”) $105.00XQ03-493* • 10-001 Strike, over 2” thru 6” lip 89.30

* Specify lip length.

B500-1Price Book 74Effective Month/Day, 2013 • Rev. 4/13

B500Introduction

Table of Contents

Functions B500-2

Complete Locks B500-3

Options B500-4 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B500-4 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . B500-4 Full Size Interchangeable Core . . . . . . . . B500-5 Less Full Size Interchangeable Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-5 Small Format Interchangeable Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-6 Less Small Format Interchangeable Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-6 Small Format Disposable Core . . . . . . . . . B500-6 Locks Less Components . . . . . . . . . . . . B500-7 Primus® . . . . . . . . . . . . . . . . . . . . . . . . . . B500-7Parts B500-8 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-8 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B500-8 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . B500-9 Adapters . . . . . . . . . . . . . . . . . . . . . . . . B500-10 Door/Frame Reinforcements . . . . . . . . . B500-10 Screws . . . . . . . . . . . . . . . . . . . . . . . . . B500-11 Screw Packs . . . . . . . . . . . . . . . . . . . . . B500-11 Special Screw and Tailpiece Packs . . . B500-11

Complete Cylinders See Cylinders Section

How To Order Forms & Examples

Product Identification B5 60 P F

UL Listing Suffix F = UL Listed Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core BD = Less SFIC BDC = Disposable SFIC GD = Everest 29 Patented SFIC HD = Construction SFIC

Function

Lock Series

SFIC = Small Format (Best® Style) Interchangeable Core

Standard Features*Certification ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door (except B571)Deadbolt 1” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throwStrike 1 1/8” x 2 3/4”, Square corner, boxBackset Adjustable for 2 3/8” or 2 3/4”Cylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/8” – 1 7/8” standard cylinder or thumbturn only, 1 5/8” - 2” interchangeable core cylinderKeys Two cut keys per lock, 6-pin, S123 section**Reinforcement Metal dust box reinforcer with three - 3˝ screwsTrim Ring 1” Wrought brass or bronze, reinforced with security insert

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze 613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AM Antimicrobial Coating on Satin Chromium643e Aged Bronze

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-2

B500 • Functions

ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.

SCHLAGE ANSI

Bored Deadbolt Locks

B560P E0152 Single Cylinder Deadbolt LockDeadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown.

B562P E0142 Double Cylinder Deadbolt Lock*

B580 E0192 Door BoltDeadbolt thrown or retracted by turnunit only. No outside trim. Boltautomatically deadlocks when fullythrown. Requires 1 1/2” cross bore prep.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

B581 E01112 Door Bolt with TrimDeadbolt thrown or retracted by turnunit only. Outside blank plate. Bolt automatically deadlocks when fully thrown. Requires 1 1/2” cross bore prep.

B563P E0172 Classroom Deadbolt LockDeadbolt thrown or retracted by keyoutside. Inside turn unit will retractbolt only. Bolt automaticallydeadlocks when fully thrown.

B561P E0162 One-Way Deadbolt LockDeadbolt thrown or retracted by keyonly. Blank plate inside. Boltautomatically deadlocks when fullythrown.

B571 Door Bolt Occupancy IndicatorDeadbolt thrown or retracted by inside turn unit. Occupancy indicator on outside (reads either in use or vacant).Requires 1 1/2” cross bore prep. Not UL Rated.

B500-3Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-Series Complete Locks • B500

Notes: 1) Split finishes are priced at the highest finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

B500-Series Finishes 626 605 606 613 609 612 619 625Function Description 643e KeylessB580 No trim outside, Turn bolt inside $48 $54 $64 B580F No trim outside, Turn bolt inside, Fire rated 55 61 71 B581 Blank plate outside, Turn bolt inside 48 54 64 B581F Blank plate outside, Turn bolt inside, Fire rated 55 61 71 B571 Occupancy indicator outside, Turn bolt inside, 50 56 66 One 61-509 Emergency Release Key included

Not UL Rated Keyed, Single CylinderB560P Single cylinder outside, Turn bolt inside $61 $67 $77 B560PF Single cylinder outside, Turn bolt inside, Fire rated 67 73 83 B561P One way cylinder outside, Blank plate inside 61 67 77 B561PF One way cylinder outside, Blank plate inside, Fire rated 67 73 83 B563P Classroom cylinder outside, Retraction turn bolt inside 64 70 80 B563PF Classroom cylinder outside, Retraction turn bolt inside, Fire rated 71 77 87 Keyed, Double Cylinder

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. B562P Double cylinder $83 $89 $99

Outside Cylinder Trim Inside Cylinder Trim Rose and Turn

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-4

B500 • Options Deadbolts, Strikes

12-288 Standard

10-094Standard

Deadbolts Hsg Add to Backset Description Dia Specify Lock Price Square corner, 1” x 2 1/4”, standard 1” 12-288 1/4” Radius round corner, 1” x 2 1/4” 1” 12-289 2 3/8” Circular, drive-in, 626 only 1” 12-290 or Triple option, 1/4” radius round corner faceplate with 1” x 2 1/4” square 1” 12-287

N/C

2 3/4” corner and circular faceplates Square corner, 1 1/8” 1” 12-291For UL Listed Locks 2 3/8” Square corner, 1” x 2 1/4”, standard 1” 12-294 N/C or 2 3/4”

5” Square corner, 1 1/8” x 2 1/4” 1” 12-633 $17.80

10-064 10-087 10-092 10-095

Strikes Lip Add to Description Length Specify Lock PriceCircular drive-in, thimble strike, 1 3/16” diameter, 494 (for 626) only — 10-064 N/CANSI, box, 1 1/4” x 4 7/8” 1 3/16” 10-087 $5.201/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-092Square corner with metal dust box, 1 1/8” x 2 3/4”, standard — 10-094 Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-095Round corner, 1 1/8” x 2 3/4”, ni box — 10-108 1/4” Round corner, 1 1/4” x 3 5/8”, 4 hole, 605, 609, 620, 630 only — 10-104 N/Cno reinforcement strike provided1/4” Round corner, 1” x 2 1/4”, 605, 609, 630 only — 10-103no reinforcement strike provided2” strike reinforcing screws, 605, 609, 630, 643e only — J250-028Strike reinforcer, use with 10-094, 10-108 — 37-016

Shaded items are standard components and arefurnished with locks unless otherwise specified.

10-108

12-29012-289 12-287

B500-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable Core Options • B500

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Locks are furnished 1-bitted, with two 6-pin keys, unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For full size construction core, specify T suffix. Example: B560T. Available at no additional charge. Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details. 5) For 1-3/8” to 1-5/8” door thickness, see page B500-7. 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Full Size Interchangeable Core, Doors 1 5/8” – 2” Finishes 605 606 609 612 619 625 Function Description 626 643e 613 Keyed, Single CylinderB560R Single core outside, turn inside $122 $128 $138 B560RF Single core outside, turn inside (UL listed) 127 133 143 B561R Single core outside, blank plate inside 122 128 138 B561RF Single core outside, blank plate inside (UL listed) 127 133 143 B563R Single core outside, classroom turn inside 125 131 141 B563RF Single core outside, classroom turn inside (UL listed) 130 136 146 Keyed, Double CylinderB562R Double core $170 $176 $186

Less Full Size Interchangeable Core, Doors 1 5/8” – 2” Finishes 605 606 609 612 619 Function Description 626 625 643e 613Less Full Size Interchangeable Core, Single CylinderB560J Less single core outside, turn inside $84 $90 $100 B560JF Less single core outside, turn inside (UL listed) 89 95 105 B561J Single core outside, blank plate inside 84 90 100 B561JF Single core outside, blank plate inside (UL listed) 89 95 105 B563J Single core outside, classroom turn inside 85 91 101 B563JF Single core outside, classroom turn inside (UL listed) 91 97 107 Less Full Size Interchangeable Core, Double Cylinder

B562J Less double core $91 $97 $107

Full Size Interchangeable Core

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-6

B500 • Options Small Format Interchangeable Core

Notes: 1) Key symbol must be specified. Everest 29 R Family keyways are restricted. See Terms & Conditions for more information. 2) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 3) For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details. 4) For small format disposable core, specify suffix BDC. Example: B560BDC. Available at no additional charge.

Note: 5) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Small Format Interchangeable Core, Doors 1 5/8” – 2” Finishes 605 606 609 612 619 625Function Description 626 643e 613Keyed, Single CylinderB560GD Single core outside, turn inside $133 $139 $149 B560GDF Single core outside, turn inside (UL listed) 138 144 154 B561GD Single core outside, blank plate inside 133 139 149 B561GDF Single core outside, blank plate inside (UL listed) 138 144 154 B563GD Single core outside, classroom turn inside 135 141 151 B563GDF Single core outside, classroom turn inside (UL listed) 140 146 156 Keyed, Double CylinderB562GD Double core $184 $190 $200

Less Small Format Interchangeable Core, Doors 1 5/8” – 2” Finishes 605 606 609 612 619Function Description 626 625 643e 613Less Small Format Interchangeable Core, Single CylinderB560BD Less single core outside, turn inside $84 $90 $100 B560BDF Less single core outside, turn inside (UL listed) 90 96 106 B561BD Single core outside, blank plate inside 84 90 100 B561BDF Single core outside, blank plate inside (UL listed) 90 96 106 B563BD Single core outside, classroom turn inside 85 91 101B563BDF Single core outside, classroom turn inside (UL listed) 93 99 109 Less Small Format Interchangeable Core, Double CylinderB562BD Less double core $93 $99 $109

Small Format Interchangeable Core

B500-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Locks Less Components, Primus®,Non-Standard Finishes Options • B500

Locks Less Components Deduct from Description Specify Lock PriceLess deadbolt LLL for deadbolt $10.10 Example: B560P 605 LLL 10-092Less strike LLL for strike 4.20 Example: B560P 605 12-288 LLLLess standard cylinder, L suffix 13.00B560 Example: B560LLess standard cylinder, L suffix 26.00B562 Example: B562L

Note: 4) For door thicknesses not listed, please use the Schlage Innovation Center Process.

Primus®XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyB500-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder separately. See Cylinders. Example: 1 ea. B560L 1 ea. 20-729B500-Series lock and Primus full size Lock less full size core (use J suffix). Order Primus coreinterchangeable core cylinder separately. See Cylinders: Interchangeable Core. Example: 1 ea. B562J 2 ea. 20-740

Non Standard Door Thickness Add to Description Specify Lock PriceExtended Equally (EE) Over 1 3/4” to 2 1/4” Door thickness and how door is extended (except interchangeable core locks) Example 2”, EE N/C

Extended Equally (EE) 1 3/8” to 1 5/8” Door thickness and how door is extended(for interchangeable core locks) Example 1 3/8”, EE $6.80

Finish: 626AM Description of Components Coated Add to Deadbolt PriceInside Thumbturn, Rose Outside Trim Ring, Cylinder Faceplate $13.00

Ordering notes for all Antimicrobial Coatings: 1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. 2) Please specify 626AM on each line item requiring antimicrobial coating. 3) For ease of identification, a sticker will be applied to a non-visible location on product.

Antimicrobial Coating 6 Extended Factory Lead Time

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-8

B500 • Parts Trim, Deadbolts

B302-041 B600-018 12-626

12-288

Trim Part Specify Price Number Finish Description EachB302-041 • Rose and turn $33.70B600-018 Mounting plate for rose and turn 7.5012-626 • Blank rose, exposed screws 18.3038-034 • Blank mounting plate kit for use on one side of B580 70.20B302-045 • Classroom rose and turn 33.70

Note: 1) For trim rings and inserts, see Cylinders: B500.

12-289 12-290 12-287

Deadbolts Part Specify Hsg Price Number Finish Backset Description Dia Each12-288 • Square corner, 1” x 2 1/4” 1” $31.70 12-289 • 2 3/8” 1/4” Radius round corner, 1” x 2 1/4”12-290 or 1” Circular drive-in, 626 only 1” 31.7012-287 • 2 3/4” Triple option, 1/4” radius round corner faceplate with 1” x 2 1/4” 1” 39.80 square corner and circular faceplates12-291 • Square corner, 1 1/8” x 2 1/4” 1” 31.7012-633 • 5” Fixed backset, square corner, 1 1/8” x 2 1/4” 1” 67.30 39-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 42.10

*This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

B302-045

B500-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Strikes Parts • B500

Strikes Part Specify Price Number Finish Description Lip Length Each10-064 Circular drive-in, thimble strike, 1 3/16” diameter, 494 (for 626) only — $12.6010-087 • ANSI, box, 1 1/4” x 4 7/8” 1 3/16” 17.2010-092 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 8.1010-094 • Square corner with metal dust box, 1 1/8” x 2 3/4”, standard — 13.0010-095 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.7010-103 • 1/4” Round corner, 1” x 2 1/4”, 605, 609, 630 only — 2.3010-104 • 1/4” Round corner, 1 1/4” x 3 5/8”, 4 hole (605, 609, 630 only) — 2.8010-108 • Round corner, 1 1/8” x 2 3/4”, no box — 13.3010-112 Metal dust box and 3 screws, use with 10-094, 10-108 — 5.6037-016 Strike reinforcer, use with 10-094, 10-108 — 11.60

10-064 10-087 10-092 10-094 10-095 10-108

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-10

B500 • Parts Adapters, Door/Frame Reinforcements

38-031 B520-649

Accessories & Adapters Price Each 605 609 Part Specify 612 619 Number Finish Description 626 625 643e 613 38-031 • 2 1/2” Diameter adapter ring for 2 1/8” door preparation, for under cylinder $12.80 $14.80 $14.80B520-649 • Trim ring w/shield for B560 / B562 16.30 18.30 18.30B520-650 • Trim ring w/shield for IC functions 16.30 18.30 18.30A501-878 • Faceplate adapter to adapt 1” faceplate to 1 1/8” door preparation Order in multiples of 100 $0.58

A501-566

Door/Frame Reinforcements Part Price Number Description EachA501-565 Reinforcer for 1 3/8” thick nonreinforced metal doors; fits both 7/8” and 1” diameter housings (2 required per lock) $14.40 A501-566 Reinforcer for 1 3/4” thick nonreinforced metal doors; fits both 7/8” and 1” diameter housings (2 required per lock)37-016 Door frame strike reinforcer 11.60

Occupancy Indicator Emergency Key Part Price Number Description Each61-509* Emergency release key standard size, for B571 occupancy indicator deadbolts $7.0061-510* Emergency release key large size, for B571 occupancy indicator deadbolts 13.70

B520-650

* Includes one key, ring, and instruction tag.

B500-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Screws, Screw Packs,Special Screw and Tailpiece Packs Parts • B500

Screws Description Application Price Each (Order in Part Specify multiples Number Finish Size Type Use Door Thickness of 100) Keyless, B580B600-066 • 6-32 x 1/4” PH mach. Turn — $1.70B600-048 8-32 x 1/2” PH mach. Mounting plate — 0.76F506-359 8 x 3/4” RH wood Mounting plate — 0.33Keyed, Single Cylinder, B560P, B563PB600-100 1/4”-28 x 1 15/16” POH mach. Mounting 1 3/8” - 1 3/4”B600-101 1/4”-28 x 2 1/2” POH mach. Mounting over 1 3/4” - 2 1/4”

$1.70B600-066 • 6-32 x 1/4” PH mach. Turn —B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.58Keyed, Single Cylinder, B560GD, B563GD, B560R, B563RB600-100 1/4”-28 x 1 15/16” POH mach. Mounting 1 3/8” - 2 1/4” $1.70B600-066 • 6-32 x 1/4” PH mach. Turn —Keyed, Double Cylinder, B562PB600-047 1/4”-28 x 3 13/64” PH mach. Mounting 1 3/8” - 1 3/4” B600-078 1/4”-28 x 3 29/64” PH mach. Mounting over 1 3/4” - 2 1/4” $1.70

B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.58Keyed, Double Cylinder, B562GD, B562RB600-053 1/4”-28 x 2 61/64” PH mach. Mounting 1 3/8” - 2 1/4” $1.70B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.58Keyless, B571, B581B520-662 10-32 x 1 1/8” POH mach. Mounting 1 3/8” - 1 3/4” B520-663 10-32 x 1 3/4” POH mach. Mounting over 1 3/4” - 2 1/4” $1.60B600-066 • 6-32 x 1/4” PH mach. Turn — All FunctionsC603-897 • 8 x 3/4” PFH combo Deadbolt and strike screw — $0.82J250-028 8 x 2” PFH wood 2˝ strike screw — 1.50R525-256 12 x 3” PFH wood 3˝ Metal dust box screw — 0.72

Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-12

B500 Screws, Screw Packs,Special Screw and Tailpiece Packs

Note: 1) For tailpieces and cylinders see Cylinders: B500.

Screw Packs Part Specify Price Number Finish Door Thickness Contents EachKeyless, B58061-506 • 1 3/8” – 2 1/4” (2) B600-048 (2) F605-359 (4) C603-897 $13.40 (1) B600-018 (2) B600-066Keyed, Single Cylinder, B560P, B563P61-500 • 1 3/8” – 1 3/4” (1) B600-018 (2) B600-100 (2) B600-066 (4) C603-897 $11.1061-501 • over 1 3/4” – 2 1/4” (1) B600-018 (2) B600-101 (2) B600-066 (4) C603-897Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R61-500 • 1 3/8” – 2” (1) B600-018 (2) B600-100 $11.10 (2) B600-066 (4) C603-897Keyed, Double Cylinder, B562P61-502 • 1 3/8” – 1 3/4” (2) B600-047 (4) C603-897 $8.2061-503 • over 1 3/4” – 2 1/4” (2) B600-078 (4) C603-897Keyed, Double Cylinder, B562GD, B562R61-507 • 1 3/8” – 2” (2) B600-053 $8.20 (4) C603-897Keyless, B581, B57161-504 • 1 3/8” – 1 3/4” (2) B520-662 (4) C603-897 (2) B600-066 (1) B600-018 $17.5061-505 • over 1 3/4” – 2 1/4” (2) B520-663 (4) C603-897 (2) B600-066 (1) B600-018

B600-1Price Book 74Effective March 4, 2013 • Rev. 3/13

B600/700/800Introduction

Table of ContentsFunctions B600-2Complete Locks B600-3 B600-Series. . . . . . . . . . . . . . . . . . . . . . . B600-3 B700-Series: Primus® Controlled Access . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-4 B800-Series: Primus High Security . . . . B600-4Options B600-5 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B600-5 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-5 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . B600-6 Small Format Interchangeable Core Small Format Construction Core . . . . . . B600-6 Locks Less Components . . . . . . . . . . . . B600-7 Non-Standard Door Thickness . . . . . . . . B600-7 Tamper Resistant Torx® Screws . . . . . . B600-7Parts B600-8 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B600-8 Deadbolts, Less Faceplate . . . . . . . . . . . B600-9 Faceplate Kits, Deadbolt . . . . . . . . . . . . . B600-9 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . B600-9 Door/Frame Reinforcements . . . . . . . . . B600-10 Screws . . . . . . . . . . . . . . . . . . . . . . . . . B600-10 Screw and Ball Bearing Packs . . . . . . B600-10 Screw Packs, Torx® . . . . . . . . . . . . . . . . B600-11 Special Parts . . . . . . . . . . . . . . . . . . . . . B600-11

Complete Cylinders See Cylinders Section

How To Order Forms & Examples

Product Identification B6 60 P X

Screw Suffix X = Torx® screws

Cylinder Suffix P = 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core BD = Less SFIC BDC = Disposable SFIC GD = Everest 29 ™ Patented SFIC HD = Construction SFIC

Function

Lock Series B6 = Conventional B7 = Primus® Controlled Access B8 = Primus High Security

SFIC = Small Format (Best® Style) Interchangeable Core

Finish Codes and DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Satin Brass, Blackened612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US26D) Satin Chromium Plated626AM Antimicrobial Coating on Satin Chromium643e (US11) Aged Bronze

Standard FeaturesLocks are furnished with standard features unless otherwise specified.

Certification ANSI/BHMA Certified A156.5-2001, Grade 1 auxiliary lock. UL Listed for 3-hour fire door, B800-Series is UL437 listed.Deadbolt 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throwStrike 1 1/8” x 2 3/4”, Square corner, boxBackset 2 3/4”Door Range 1 5/8” – 2”Reinforcement Metal dust box reinforcer with two 3” screwsTrim Rings 7/8” Solid brass or bronzeCylinder* 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)Keys* Two nickel silver cut keys per lock, 6-pin, S123 section

* Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-2

B600/700/800 • Functions

ANSI/BHMA Certified A156.5-2001, Grade 1 auxiliary lock. UL Listed for 3-hour fire door, B800-Series is UL437 listed.

SCHLAGE ANSI

Bored Deadbolt Locks

B660PB760PB860P E0151 Single Cylinder Deadbolt Lock

Deadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown.

B662PB762PB862P E0141 Double Cylinder Deadbolt Lock*

Deadbolt thrown or retracted by keyfrom either side. Bolt automaticallydeadlocks when fully thrown.

B661PB761PB861P E0161 One-Way Deadbolt Lock

Deadbolt thrown or retracted by keyonly. Blank plate inside. Boltautomatically deadlocks when fullythrown.

B663PB763PB863P E0171 Classroom Deadbolt Lock

Deadbolt thrown or retracted by keyoutside. Inside turn unit will retractbolt only. Bolt automaticallydeadlocks when fully thrown.

B664PB764PB864P E0101 Cylinder Lock

Deadbolt thrown or retracted by keyfrom one side. No inside trim. Boltautomatically deadlocks when fullythrown. Requires 1 1/2” cross bore only.

B680 E0191 Door BoltDeadbolt thrown or retracted by turn unit only. No outside trim. Bolt automatically deadlocks when fully thrown. Requires 1 1/2” cross bore only.Door range is 1 3/8” - 2 1/2”.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

B600-3Price Book 74Effective March 4, 2013 • Rev. 3/13

B600 Complete Locks • B600/700/800

Notes: 1) Split finishes are priced at the highest finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) B600 not available less cylinder 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

B600-Series Finishes 626 605 606 613 609 612 619 625Function Description 643e KeylessB680 No trim outside, Turn bolt inside $113 $119 $129Keyed, Single CylinderB660P Single cylinder outside, Turn bolt inside $144 $150 $160 B661P One way cylinder outside, Blank plate inside B663P Classroom cylinder outside, Retraction turn bolt inside 150 156 166 B664P Single cylinder outside, No trim inside 144 150 160Keyed, Double Cylinder

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. B662P Double cylinder $184 $190 $200

Outside Cylinder Trim Inside Cylinder Trim Rose and Turn

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-4

B600/700/800 • Complete Locks B700, B800

Notes: 1) Split finishes are priced at the highest finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) B700 and B800 not available less cylinder 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

B700-Series Finishes 626 605 606 613 609 612 619 625Function Description 643e Keyed, Single CylinderB760P Single cylinder outside, Turn bolt inside

$199 $205 $215

B761P One way cylinder outside, Blank plate inside B763P Classroom cylinder outside, Retraction turn bolt inside 207 213 223 B764P Single cylinder outside, No trim inside 199 215 215 Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. B762P Double cylinder $292 $298 $308

B800-Series: Primus High Security Finishes 626 605 606 613 609 612 619 625Function Description 643e Keyed, Single CylinderB860P Single cylinder outside, Turn bolt inside

$217 $223 $233

B861P One way cylinder outside, Blank plate inside B863P Classroom cylinder outside, Retraction turn bolt inside 230 236 246 B864P Single cylinder outside, No trim inside 217 223 233Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. B862P Double cylinder $307 $313 $323

Primus® ControlledAccess Cylinder Trim

UL

Primus® High SecurityCylinder Trim

Primus cylinders are offered for sale through specificchannels of distribution based on security levels. See Terms & Conditions for more information.

B600-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadbolts, Strikes Options • B600/700/800

12-631Standard

12-641

Deadbolts Housing Add to Backset Description Diameter Specify Lock Price 2 3/8” Square corner, 1 1/8” x 2 1/4” 1” 12-630 Circular, drive-in, 626 only 1 1/16” 12-640 N/C 2 3/4” Square corner, 1 1/8” x 2 1/4”, standard 1” 12-631 Circular, drive-in, 626 only 1 1/16” 12-641 3 3/4” Square corner, 1 1/8” x 2 1/4” 1” 12-632 Circular, drive-in, 626 only 1 1/16” 12-642 $19.20 5” Square corner, 1 1/8” x 2 1/4” 1” 12-633 Circular, drive-in, 626 only 1 1/16” 12-643

2-3/8 or 2-3/4” Square corner, 1-1/8” x 2-1/4”, adjustable backset 1” 12-297 N/C Circular, drive-in, 626 only, adjustable backset 1” 12-317

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

10-094Standard

10-064 10-087 10-092 10-095

Strikes Lip Add to Description Length Specify Lock PriceSquare corner with metal dust box, 1 1/8” x 2 3/4”, standard

- 10-094

Circular drive-in, thimble-strike, 1 3/16” diameter, 494 (for 626) only 10-064 ANSI, box, 1 1/4” x 4 7/8” 1 3/16” 1 3/16” 10-087 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8”

1 1/8” 10-092

Square corner, full lip, no box, 1 5/8” x 2 1/4” 10-095 N/C1/4” Round corner, 1 1/4” x 3 5/8”, 4 hole, metal dust box, 605, 609, 620, 630 10-104 1/4” Round corner, 1” x 2 1/4”, 605, 609, 630 only

- 10-103

Strike reinforcer, use with 10-094 37-016 2” mounting screws, 605, 609, 630 only J250-028

Shaded items are standard components and arefurnished with locks unless otherwise specified.

12-297 12-317

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-6

B600/700/800 • OptionsFull Size Interchangeable Core,

Small Format Interchangeable Core

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: B660R $28.00Full size construction core** T suffix, B600-Series only Add to Lock Price Example: B660T 28.00Less full size core J suffix, B600-Series only Deduct from Example: B660J Lock Price 25.00

* B600R locks are furnished 1-bitted, with two 6-pin keys, unless otherwise specified. B600R locks are not available with 0-bitted interchangeable cores. B700R locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is not available for B664, B764, and B800-Series lock functions.

Notes: 3) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying. 4) Small format interchangeable core is not available for B664, B700-Series and B800-Series lock functions. 5) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Small Format Interchangeable CoreSmall Format Construction Core Add to Lock Price Description Specify (per core)Everest 29™ patented core* GD Suffix $59.00 Example: B660GDSmall format construction core** HD Suffix 32.00 Example: B660HDLess small format core BD Suffix N/C Example: B660BDSmall format disposable core BDC suffix N/C Example: B660BDC

* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.

Full SizeInterchangeable Core

Small FormatInterchangeable Core

B600-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Locks Less Components, Non-Standard Door Thickness,Torx® Screws Options • B600/700/800

Locks Less Components Deduct from Description Specify Lock PriceLess deadbolt LLL for deadbolt $13.30 Example: B660P 605 LLL 10-064Less strike LLL for strike 4.20 Example: B660P 605 12-630 LLLLess key blanks, B700 and B800 only LKB 13.00

Non-Standard Door Thickness Description Specify Add to Lock Price1 3/8”* 1 3/8” Thick door $7.10Extended Equally (EE), over 2” – 2 1/2” (except Door thickness and how door is extended N/Csmall format interchangeable core locks)** Example: 2 1/4”, EE

* Not available for interchangeable core locks. ** For small format interchangeable core locks, see Special Parts for conversion kits.Note: 2) For doors over 2 1/2” – 4” thick, see Special Parts for conversion kits.

Note: 3) Tamper resistant screws not available for small format interchangeable core locks.

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch, strike, and mounting screws X suffix $14.00 Example: B660PX

Note: 1) Less cylinder option not available.

Ordering notes for Antimicrobial Coatings: 1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. 2) Please specify 626AM on each line item requiring antimicrobial coating. 3) For ease of identification, a sticker will be applied to a non-visible location on product.

Finish: 626AM Description of Components Coated Add to Deadbolt PriceInside Thumbturn, Rose Outside Trim Ring, Cylinder Faceplate $12.90

Antimicrobial Coating 6 Extended Factory Lead Time

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-8

B600/700/800 • Parts Trim, Deadbolts

12-617

12-631 12-641

B600-017

Trim Part Specify Price Number Finish Description Each 12-617 • Rose and turn $34.30 12-618 • Rose and turn, classroom 38.30 12-625 Classroom driver kit 7.70 12-626 • Blank inside rose, exposed screws, B661 18.30 38-034 • Blank mounting plate kit for use on one side of B664, B680 70.20 B600-017 Security shield, 2 1/8” door preparation 7.70 B600-018 Mounting plate, turn 7.50 B610-035 Support (anchor) and mounting screws, B664 19.90

Deadbolts Part Specify Hsg Price Number Finish Backset Description Dia Each12-297 • 2-3/8 or Square corner, 1-1/8” x 2-1/4”, adjustable backset

1”

$43.50 12-317 2-3/4” Circular, drive-in, 626 only, adjustable backset 12-630 • 2 3/8” Square corner, 1 1/8” x 2 1/4” 1” 12-640 Circular, drive-in, 626 only 1 1/16” 38.5012-631 • 2 3/4” Square corner, 1 1/8” x 2 1/4”, standard 1”12-641 Circular, drive-in, 626 only 1 1/16”12-632 • 3 3/4” Square corner, 1 1/8” x 2 1/4” 1” 12-642 Circular, drive-in, 626 only 1 1/16” 67.30 12-633 • 5” Square corner, 1 1/8” x 2 1/4” 1”12-643 Circular, drive-in, 626 only 1 1/16”39-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 39.70

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

Note: 1) For trim rings and cylinders see Cylinders: B600/700/800.

12-297 12-317

B600-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadbolts, Faceplate Kits, Strikes Parts • B600/700/800

Deadbolts, Less Faceplate Part Hsg Price Number Backset Description Dia Each12-650 2 3/8” Deadbolt unit less faceplate 1” $30.40 12-651 2 3/4”12-652 3 3/4” Deadbolt unit less faceplate 1” 59.40 12-653 5”

Faceplate Kits, Deadbolt Part Specify Price Number Finish Description Each12-627 • Square corner faceplate, 1 1/8” x 2 1/4”, backplate and screws $7.80 12-628 Circular drive-in faceplate and collar, 626 only

10-064 10-087 10-092 10-095

Strikes Part Specify Lip Price Number Finish Description Length Each10-094 • Square corner with metal dust box, 1 1/8” x 2 3/4”, standard $12.4010-064 • Circular drive-in, thimble-strike, 1 3/16” diameter, — 12.10 494 (for 626) only 10-087 • ANSI, plastic dust box, 1 1/4” x 4 7/8” 1 3/16” 16.4010-092 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.40 10-095 • Square corner, full lip, no box, 1 5/8” x 2 1/4”K510-066 Plastic dust box for ANSI strike 5.4010-103 • 1/4” Round corner, 1” x 2 1/4”, metal dust box, 605, 609, 630 only — 2.30 10-104 • 1/4” Round corner, 1 1/4” x 3 5/8”, 4 hole, 605, 609, 620, 630 only 2.80 10-112 Metal dust box and 3 screws, use with 10-094 13.30 37-016 Strike reinforcer, use with 10-094 11.70

10-094Standard

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-10

B600/700/800 • PartsDoor/Frame Reinforcements, Screws,

Screw and Ball Bearing Packs

A501-566

Door/Frame Reinforcements Part Price Number Description EachA501-565 Reinforcer for 1 3/8” thick nonreinforced metal doors; fits both 7/8” and 1” diameter housings $14.40 (2 required per lock)A501-566 Reinforcer for 1 3/4” thick nonreinforced metal doors; fits both 7/8” and 1” diameter housings 14.40 (2 required per lock)37-016 Door frame strike reinforcer 11.70

Screws Description Price Each Part Specify (Order in multiples Number Finish Size Type Application of 100)C603-256 • 12-24 x 1” PFH ANSI strike $0.76C603-897 • 8 x 3/4” combo Deadbolt and strike 0.88

Screw and Ball Bearing Packs Part Specify Price Number Finish Door Thickness Contents EachKeylessB610-066 • Rose trim, B680 (2) Mounting screws $6.00Keyed, Single CylinderB610-049 1 3/8” – 2 1/2”, B664 (2) Mounting screwsB610-050 1 3/8” – 2”, B660, 661, 663 (2) Mounting screws 14.20B610-051 over 2” – 2 1/2”, B660, 661, 663 (2) Ball bearings B610-066 • Rose trim, B660, 661, 663 (2) Mounting screws 6.00Keyed, Double Cylinder (except Interchangeable Core)B610-053 1 3/8” – 2”, B662P (2) Mounting screws 14.20B610-055 over 2” – 2 1/2”, B662P (2) Ball bearings Keyed, Double Cylinder, Interchangeable CoreB610-054 1 5/8” – 2”, B662R (2) Mounting screws 14.20 B610-056 over 2” – 2 1/2”, B662R (2) Ball bearings

Note: 1) Above screw packs are also used for B700 and B800-Series locks.

B600-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Torx® Screw Packs, Special Parts Parts • B600/700/800

Screw Packs, Torx®

Part Specify Price Number Finish Door Thickness Contents EachKeylessB610-065 • Rose trim, B680 (2) Mounting screws (T-10) $7.10Keyed, Single CylinderB610-059 1 3/8” – 2 1/2”, B664 (2) Mounting screws (T-30) $15.10B610-065 • Rose trim, B660, 661, 663 (2) Mounting screws (T-10) 7.10Keyed, Double Cylinder (except Interchangeable Core)B610-061 1 3/8” – 2”, B662P (2) Mounting screws (T-30) $15.10B610-063 over 2” – 2 1/2”, B662P (2) Ball bearings Keyed, Double Cylinder, Interchangeable CoreB610-062 1 5/8” – 2”, B662R (2) Mounting screws (T-30) $15.10 B610-064 over 2” – 2 1/2”, B662R (2) Ball bearings All FunctionsC203-311 • Deadbolt and strike (4) C503-766 (1) T-15 size Torx Bit 8-32 x 1/2”C203-312 • Deadbolt and ANSI strike (2) C503-766 (1) T-15 size Torx Bit $15.30 8-32 x 1/2” (2) L583-371 (1) T-20 size Torx Bit 12-24 x 1/2”

Notes: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s). 2) Above screw packs are also used for B700 and B800-Series locks.

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Door Price Number Range Function Description EachXB11-916 2”-4” B660P, B663P $85.00XB11-917 2”-3” B662P 53.00 3-1/8”-4” B662P RFQXB11-918 2”-4” B760P, B763P B860P, B863P Screw and tailpiece conversion kit for B600/ 85.00XB11-919 2”-4” B762P, B862P 700/800-Series locks to fit doors Extended 53.00XB11-920 2”-4” B660R, B660J, B660T, B663R, Equally (EE), over 2 1/2” – 4” thick. Specify 53.00 B663J, B663T, B760R, B763R

door thickness.

XB11-921 2”-4” B662R, B662J, B662T, B762R 53.00XB11-922 2”-4” B660BD, B660GD, B660HD, Screw and tailpiece conversion kit for 53.00 B663BD, B663GD, B663HD B600-Series locks to fit doors ExtendedXB11-923 2”-4” B662BD, B662GD, B662HD Equally (EE), over 2 1/2” – 4” thick. RFQ

Specify door thickness.

Price Book 74Effective March 4, 2013 • Rev. 3/13

B600-12

B600/700/800 Notes

D-1Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D KnobsIntroduction

Table of ContentsFunctions D-2Complete Locks D-4Options D-5 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . . . D-6 Locks Less Components . . . . . . . . . . . . . . . D-6 Non-Standard Door Thickness . . . . . . . . . . . D-7 Primus® / Primus XP . . . . . . . . . . . . . . . . . . . D-7 Tamper Resistant Torx® Screws . . . . . . . . . . D-7 Special Options . . . . . . . . . . . . . . . . . . . . . . . D-7Parts D-8 Knobs, Standard . . . . . . . . . . . . . . . . . . . . . . D-8 Knobs and Related Parts, Interchangeable Core . . . . . . . . . . . . . . . . . . D-8 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 Accessories and Adapters . . . . . . . . . . . . . D-10 Backset Links and Reinforcements . . . . . . D-10 Electrified Lock Kits . . . . . . . . . . . . . . . . . . D-10 Miscellaneous Parts . . . . . . . . . . . . . . . . . . D-11 Plunger Units . . . . . . . . . . . . . . . . . . . . . . . . D-12 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13 Screw Packs, Standard . . . . . . . . . . . . . . . D-13 Screw Packs, Torx® . . . . . . . . . . . . . . . . . . . D-13 Special Parts . . . . . . . . . . . . . . . . . . . . . . . . D-13Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification D 53 P D

Latch Suffix D = Deadlatch S = Springlatch Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder C = Less 6-Pin Cylinder* R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core

Function

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US 11) Aged Bronze

Standard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Latch 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1/2” throwStrike 1 1/4” x 4 7/8”, ANSI, Square corner, no boxBackset 2 3/4”Cylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/8” – 2”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

* Used for double cylinder functions.

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-2

D Knobs • Functions

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Non-Keyed Locks

D10S F75 Passage LatchBoth knobs always unlocked.

SCHLAGE ANSI

Keyed Locks

D53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside knob,requiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsideknob until unlocked by key or byturning inside knob.

D60PD F88 Vestibule/Classroom SecurityLockLatch retracted by key from outsidewhen outside knob is locked by key ininside knob. Inside knob is alwaysunlocked.

D66PD F91 Store Lock*Key in either knob locks or unlocksboth knobs.

D70PD F84 Classroom LockOutside knob locked and unlocked bykey. Inside knob always unlocked.

D72PD F80 Communicating Lock*Key in either knob locks or unlockseach knob independently.

D73PD F90 Corridor LockLocked or unlocked by key fromoutside. Push-button locking frominside. Turning inside knob or closingdoor releases button.

D80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.

D80PDEL Electrically Locked (Fail Safe)Outside knob continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside knobalways free for immediate exit.

D25D Exit LockBlank plate outside. Inside knobalways unlocked.

D40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.

D44S Hospital Privacy LockPush-button locking. Unlocked fromoutside by turning emergency turn-button. Turning inside knob or closingdoor releases button.

D170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

D-3Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Functions • D Knobs

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Keyed Locks

D80PDEU Electrically Unlocked (FailSecure)Outside knob continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Insideknob always free for immediate exit.

D82PD F87 Institution Lock*Both knobs fixed. Entrance by key ineither knob.

D85PD** F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatorthrown.

** 85 function locks are not available in Full Size & Small Format Interchangeable Cores.

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-4

D Knobs • Complete Locks D-Knobs

D-Knobs Knob Styles PLY ORB TUL Finishes 626 605 613 626 605 613 609 612 630 609 612 625 643e (PLY only) 625 643e 6Additional 6Additional 6Additional Leadtime Leadtime LeadtimeFunction Description 606 629 606KeylessD10S Passage $372 $384 $402 $403 $415 $433 D25D Exit D40S Privacy 461 473 491 492 504 522D44S Privacy, hospital D170 Single dummy 168 174 184 199 205 215Keyed, Single CylinderD53PD EntranceD70PD Classroom $535 $547 $565 $566 $578 $596D73PD CorridorD80PD StoreroomD80PDEL* Electrically locked 856 868 886 887 899 917D80PDEU* Electrically unlocked *AC locks: 24V, 0.35 Amps. DC locks: 24V, 0.15 Amps, Intermittent or continuous duty.D85PD** Faculty Restroom 645 657 675 676 688 706 ** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately.

Keyed, Double CylinderD60PD Vestibule/Classroom SecurityD66PD *** Store $641 $653 $671 $672 $684 $702D72PD CommunicatingD82PD *** Institution

*** CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) Split finish not available for ND25D. 5) 630 finish not available for orbit knob. 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Orbit (ORB) Plymouth (PLY) Tulip (TUL)

D-5Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Latches, Strikes Options • D Knobs

14-019Standard

43-005

Latches Hsg Specify Add to Backset Description Dia Springlatch Deadlatch Lock Price 2 3/8” Square corner, 1 1/8” x 2 1/4” — 14-047 Square corner, 1” x 2 1/4” — 14-048 N/C Square corner, 1 1/8” x 2 1/4”, standard 14-001 14-019 2 3/4” Anti-friction fire door latch 1” — 14-042 $142.00 Square corner, 1 1/8” x 2 1/4”, 3/4” throw 3 3/4” Square corner, 1 1/8” x 2 1/4” 14-010 14-028 8.50 5” Backset extension link 43-005* 22.60

Notes: 1) Links installed in hollow metal doors require reinforcement. See D-Knobs Parts: Backset Links and Reinforcements. 2) Links for backsets over 5” are sold as parts. See D-Knobs Parts: Special Parts.

Note: 3) For Electric Strike options, reference the System Accessories section of the Schlage Electronics Price Book.

* Must be used with 2 3/4” backset latches.

10-025Standard

10-013 10-016

Strikes Add to Description Lip Length Specify Lock Price

Square corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-013 N/C 1 1/2” $6.20Square corner, T-strike, deep box; used with fire door latch 1 1/8” 10-016 N/CANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 10-025 N/CANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 10-025 11.50Box for ANSI strike, must be specified — K510-066 N/C

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-6

D Knobs • OptionsFull Size Interchangeable Core,

Locks Less Components

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: D53RD ORB $30.00Full size construction core** T suffix Add to Lock Price Example: D53TD ORB 30.00Less full size core *** J suffix Deduct from Example: D53JD ORB Lock Price 27.00

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is not available for Faculty Restroom function (D85).

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details. *** Double cylinder functions are furnished with construction cores to preserve lock timing. Construction core handling charges are waived. Cores may be returned for credit. One control key is furnished at no charge. Locks are acknowledged with T suffix.

* Use PLY design for base price.

Locks Less Components Deduct from Description Specify Lock PriceLess each knob LLL for knob design $16.30 Example: D53PD LLL/TUL x ORBLess each rose LLL for rose design 11.50 Example: D53PD PLY x PLY/LLLLess standard cylinder, L suffix 52.00single cylinder functions Example: D53LD TULLess standard cylinder, C suffix 104.00double cylinder functions only Example: D66CD PLYLess indicator cylinder L suffix 76.00Faculty Restroom function (D85) Example: D85LD ORBLess springlatch LLL for latch 19.90 Example: D40S TUL 605 LLL 10-025Less deadlatch LLL for latch 26.30 Example: D53PD ORB 626 LLL 10-025Less strike LLL for strike 3.70 Example: D53PD PLY 612 14-019 LLLLock chassis only* Less all possible components Sum of all applicable Example: D53LD LLL 626 LLL LLL deducts

Orbit (ORB)

D-7Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Non-Standard Door Thickness, Primus®,Torx® Screws, Special Options Options • D Knobs

Non-Standard Door Thickness Description Specify Add to Lock PriceExtended Equally (EE), over 2” – 2 1/2” Door thickness and how door is extended. $54.10Extended Differently (ED), over 2” – 2 1/2” Example: 2”, ED 253.00

Note: 1) Locks are furnished extended equally (EE) unless otherwise specified. 2) Beyond 2-1/2” please use the Schlage Innovation Center Process. 3) For door thicknesses not listed, please use the Schlage Innovation Center Process.

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyD-Series Knob single cylinder lock and Primus Lock less cylinder (use L suffix). Order Primus cylinder separately.cylinder See Cylinders Example: 1 ea. D53LD 1 ea. 20-548D-Series Knob double cylinder lock and Primus Lock less cylinders (use C suffix). Order Primus cylinders separately.cylinder See Cylinders Example: 1 ea. D82CD 2 ea. 20-748D-Series Knob lock and Primus full size Lock less full size core (use J suffix). Order Primus core(s) separately.interchangeable core cylinder(s)* See Cylinders Example: 1 ea. D80JD 1 ea. 20-740

Note: 4) Primus is not available for Faculty Restroom function (D85).

* Double cylinder functions are furnished with construction cores to preserve lock timing. Construction core handling charges are waived. Cores may be returned for credit. One control key is furnished at no charge. Locks are acknowledged with T suffix.

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch and strike screws Torx Screws $15.00

Special Options 6 Extended Factory Lead Time Not subject to standard discount terms Specify Description Lock Function “X” Number Add to Lock Price D25x80. Blank plate outside, fixed knob inside. D25x80 XC03-543 $95.90Key in knob retracts latch. Added to D80D60 with closed outside knob. D60 XC03-928 N/CD70x80. Key locks or unlocks outside knob. Key D70x80 XC07-960 48.70in fixed inside knob retracts latch. Added to D82D25x70. Blank plate outside. Key locks or D25x70 XC11-577 95.90unlocks inside knob. Added to D70

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-8

D Knobs • Parts Knobs; Knobs and Related Parts,Interchangeable Core; Roses

Knobs, Standard Designs and Finishes ORB PLY TUL 605 605 605 Part 612 612 613 612 Number Description 626 625 613 626 625 630 626 625 61304-006 Closed knob $75.10 $77.10 $79.10 $75.10 $77.10 $79.10 $75.10 $77.10 $79.1004-007 Open knob or Cylinder knob C503-403 — — — 8.10 8.10 8.10 — — — C503-746 Cylinder sleeve — — — — — — — — 8.10C503-940 — — 8.10 — — — — — —C603-262 8.10 8.10 — — — — 8.10 8.10 —

Knobs and Related Parts, Interchangeable Core Designs and Finishes ORB 605 Part 612 Number Description 626 626 61304-030 Full size core knob, driver, retainer $61.90 $63.90 $65.90 (converts PD to JD)04-031 Full size core knob 52.50 54.50 56.5004-034* Full size core knob, core, driver, and retainer 116.00 118.00 120.00 (converts PD to RD)04-033** Full size core driver and retainer 9.40C603-569** Full size core retainer 3.20C604-333** Full size core driver, universal 6.30

* Furnished 1-bitted with two 6-pin keys unless otherwise specified. ** Design and finish not required.

Roses Designs and Finishes TUL (Use for ORB) PLY 605 Part 612 613 Number Description 626 625 63004-001 Outside rose $69.20 $71.20 $73.20 04-002 Inside rose

D-9Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Latches, Strikes Parts • D Knobs

14-001

10-025 10-013

14-019

Latches Part Number Specify Hsg Price Springlatch Deadlatch Finish Backset Description Dia Each — 14-047 • 2 3/8” Square corner, 1 1/8” x 2 1/4” $80.30 — 14-048 • Square corner, 1” x 2 1/4” 14-001 14-019 • Square corner, 1 1/8” x 2 1/4”, standard

1” 61.70

— 14-042 • 2 3/4” Anti-friction Fire Door Latch

245.00 Square corner, 1 1/8” x 2 1/4”, 3/4” Throw 14-010 14-028 • 3 3/4” Square corner, 1 1/8” x 2 1/4” 74.00 39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 39.70

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

* Specify lip length.

10-016

Strikes Part Specify Price Number Finish Description Lip Length Each10-013* • Square corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” $8.00 1 1/2” 11.1010-016 • Square corner, T-strike, deep box, 1 1/8” x 2 3/4” 1 1/8” 16.40 Use with fire door latch10-025* • ANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 11.5010-025 ANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 31.10K510-066 Box for ANSI strike — 5.10

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-10

D Knobs • PartsAccessories & Adapters,

Backset Links & Reinforcements, Electrified Lock Kits

Accessories and Adapters Part Specify Price Number Finish Description Each38-018 • Thin door extension ring (2 required per lock) $9.00A501-878 Latch front adapter (use with 1” faceplate in 1 1/8” door prep) Order in multiples of 100 0.50G506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.30

37-001 43-005 G506-815

Backset Links and Reinforcements Part Price Number Description Each37-001* Metal door reinforcer kit, fits both 7/8” and 1” diameter housings $26.0043-005** 5” Backset extension link 21.00A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors; fits both 7/8” and 1” diameter housings 13.60A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors; fits both 7/8” and 1” diameter housings 13.60A501-567 3 1/2” Long latch housing sleeve used to reinforce joint between latch and backset link or to hold 8.40 latch in metal doors; fits both 7/8” and 1” diameter housingsG506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.30

Notes: 1) Backsets 5” and longer require extension links. D-Series locks with long backsets are furnished with 1 1/8” faceplates and 1” housings. For backsets over 5”, see Special Parts. 2) Links installed in metal doors require reinforcement.

Note: 3) AC locks: 24V, 0.35 Amps. DC locks: 24V, 0.15 Amps. Intermittent or continuous duty.

* Specify door thickness, includes A501-567 and A501-565 or A501-566. ** Must be used with 2 3/4” backset latches.

Electrified Lock Kits Part Price Number Description Each38-064 Solenoid and rectifier, EL $299.00 38-065 Solenoid and rectifier, EU

D-11Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Miscellaneous Parts Parts • D Knobs

Miscellaneous Parts Part Specify Price Number Finish Description EachA501-167 Threaded rod for mounting D170s as double dummy set $11.50C100-059 Spindle unit, out and ins - D66 115.00C100-062 Spindle unit, out - D70, out and ins - D72 115.00C102-522 • Hub and cap, out (except D80, D80 EL/EU, D82, D85) 68.40C102-524 • Hub and cap, ins (except D82) 51.20C102-540 Hub and frame - D25 38.70C102-541 • Hub and cap, ins - D170 37.50C102-542 • Hub and cap, out - D80 EL/EU 68.40C102-570 • Hub and cap, out - D80, D82, D85 109.00C102-572 • Hub and cap, ins - D82 109.00C102-837 Locking plug, out - D73 55.30C102-840 Key spindle - D40, D44, D53, D60 47.90C203-034 Spindle and catch, ins (except D60, D66, D72, D80EL/EU, D82) 47.40C203-376 Plug - D85 12.30C203-390 Spindle and key cam, out - D70, D72 47.90C203-391 Spindle and key cam - D60 47.90C203-411 Key spindle and spring - D85 39.20C203-733 Locking plug - D70, D72 39.20C203-858 Spindle and hammer, ins - D85 47.90C203-947 Spindle and catch, out - D40, D44 39.20C203-948 Spindle and catch, out - D53, D60, D73, D80 39.20C303-006 Slide and roller 45.40C303-400 Spindle and catch, ins - D80EL/EU 42.80C303-439 AC Rectifier 50.30C503-008 Cotter pin Order in multiples of 100 0.46C503-019 Slide spring 4.90C503-308 Anchor spring (except D25, D170) 5.20C503-314 Slide spring seat 5.30C503-324 Spindle washer - D60, D70, D72, D85 5.20C503-334 Plunger hammer - D85 11.20C503-335 Plunger hammer spring - D85 5.10C503-339 Key spindle - D80, D82, D85 20.70C503-359 Key cam - D60 11.30C503-360 Key cam rider - D60 11.60C503-361 Key cam pin - D60 5.10C503-362 Plunger - D60 5.30C503-368 Key cam sleeve, out - D70, D72 5.10

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-12

D Knobs • Parts Miscellaneous Parts (continued), Plunger Units,Classroom Security Function Conversion Kit

Miscellaneous Parts (cont’d) Part Specify Price Number Finish Description EachC503-371 Plunger - D66 $5.30C503-400 Key cam pin - D70, D72 5.10C503-775 • Blank rose, out - D25 34.60C503-768 Spacer - D80 EL/EU 2.50C503-965 Plunger sleeve, out - D40, D44 11.40C603-500 Housing 11.20C604-187 Slide catch, restoring - D40, D44, D73, D85 5.40C604-188 Slide catch, non-restoring - D53 5.40C604-191 Slide catch spring - D40, D44, D53, D73, D85 5.10C604-204 Spindle, keyed - D80 EL/EU 20.70C604-205 Solenoid retaining clip - D80 EL/EU 6.50C604-273 Rose pin - D25 1.10C604-312 Anchor (except D25) 5.30

Plunger Units Part Price Number Description Each04-020 Plunger, ins - D40, D44 $60.8004-021 Plunger unit, out - D40 48.0004-022 Plunger unit, out - D44 59.6004-023 Plunger unit, ins - D53 47.9004-025 Plunger unit, ins - D73 47.9004-026 Plunger unit, ins - D85 110.00

Dimension Chart: Plunger Units Part Number Door Range Dim

04-020 1 3/8” – 2” 443 over 2” – 2 1/2”, EE 46804-021 1 3/8” – 2” 17004-022 over 2” – 2 1/2”, EE 19504-023 1 3/8” – 2” 44304-025

over 2” – 2 1/2”, EE 46804-026Note: 1) Specify finish and dimension for all plunger units. See Dimension Chart for dimension required. Example: 04-022 626 Dim = 195 Outside plunger unit for D44 ORB 626, over 2” – 2 1/2” door, EE

D-13Price Book 74Effective Month/Day, 2013 • Rev. 4/13

Screws, Standard Screw Packs, Torx® Screw Packs, Special Parts Parts • D Knobs

Screws Price Each (Order in Part Specify multiples Number Finish Description Door Thickness Type Size of 100)A501-171 • D170, washer — Washer — $0.78A501-746 • D170, mounting screw 1 1/2” – 2” POH Machine 1/4” 20 x 2 1/2” 0.78C603-256 • ANSI strike — PFH Combo 12-24 x 1” 0.72C603-897 • Latch and strike — PFH Combo #8 x 3/4” 0.82

Screw Packs, Standard Part Specify Price Number Finish Description Contents EachB202-517 • Latch and strike (4) C603-897 $5.60C303-007 • Mounting, D170 (1) A501-171 6.70 (1) A501-746 (3) C603-897C203-736 • ANSI strike (2) C603-256 4.50C303-028 • Mounting, all except D170 (4) C603-897 8.30 (2) C603-256

Screw Packs, Torx®

Part Specify Price Number Finish Description Contents EachC203-311 • Latch and strike (4) C503-766 (T-15) $14.40C203-312 • Latch and ANSI strike (2) C503-766 (T-15) 14.40 (2) L583-371 (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Price Number Finish Description EachXC03-069 Extension links, backsets over 5” – 42” $386.00XQ02-309* • 10-013 Strike, 7/8” flat lip 20.40

XQ03-494* • 10-013 Strike, 1 5/8” – 6” lip 86.10 10-013 Strike, 6 1/8” – 12” lip 110.00

XQ07-351* • 10-025 Strike, 7/8” flat lip 20.40 10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”, 1 3/8”, 1 1/2”) 98.60

* Specify lip length.

Price Book 74Effective Month/Day, 2013 • Rev. 4/13

D-14

D Knobs • Parts Notes

ND-1Price Book 74Effective March 4, 2013 • Rev. 3/13

ND LeversIntroduction

Table of ContentsFunctions ND-2

Complete Locks ND-5Options ND-6 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-6 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-6 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . . ND-7 Small Format Interchangeable Core Small Format Construction Core . . . . . . . . ND-7 Competitive Cores . . . . . . . . . . . . . . . . . . . .ND-8 Locks Less Components . . . . . . . . . . . . . . ND-9 Non-Standard Door Thickness . . . . . . . . . . ND-9 Primus® / Primus XP . . . . . . . . . . . . . . . . . .ND-10 Tactile Warning . . . . . . . . . . . . . . . . . . . . . ND-10 Tamper Resistant Torx® Screws . . . . . . . . ND-10 Special Options . . . . . . . . . . . . . . . . . . . . . ND-11 Request to Exit . . . . . . . . . . . . . . . . . . . . . ND-11Parts ND-12 Levers and Related Parts . . . . . . . . . . . . . .ND-12 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-12 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-13 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-13 Reinforcements . . . . . . . . . . . . . . . . . . . . . ND-14 Miscellaneous Parts . . . . . . . . . . . . . . . . . ND-14 Miscellaneous Parts . . . . . . . . . . . . . . . . . ND-15 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-16 Screw Packs, Standard . . . . . . . . . . . . . . ND-16 Screw Packs, Torx® . . . . . . . . . . . . . . . . . . ND-16 Special Parts . . . . . . . . . . . . . . . . . . . . . . ND-16Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification ND 53 P D

Latch Suffix D = Deadlatch S = Springlatch Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder C = Less 6-Pin Cylinder* R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core B = Less SFIC BDC = Disposable SFIC G = Everest 29 Patented SFIC H = Construction SFIC

Function

Lock Series

SFIC = Small Format (Best® Style) Interchangeable Core

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chrome626AM Antimicrobial Coating on Satin Chromium643e (US 11) Aged Bronze

Standard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Latch 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1/2” throwStrike 1/4” x 4 7/8”, ANSI, Square corner, no boxBackset 2 3/4”Cylinder**** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 5/8” – 2 1/8” *** Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** 1 3/4” – 2” for ND85 **** For default keyway please see page Terms-16.

* Used for double cylinder functions.

BAA/ARRA Contact your local SSC or

Sales Rep. for ordering details

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-2

ND Levers • Functions

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Non-Keyed Locks

SCHLAGE ANSI

Keyed Locks

Safe School Locks

ND10S F75 Passage LatchBoth levers always unlocked.Inside lever is always free for immediate egress. Also available with Request to Exit (RX) function.

ND50PD F82 Entrance/Office Lock †Push-button locking. Push-buttonlocks outside lever until unlocked with key or by turning inside lever. Inside lever is always free for immediate egress.

ND53PD F109 Entrance Lock †Turn/push-button locking; pushing and turn-ing button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turn-ing inside lever. Inside lever is always free for immediate egress.

ND60PD F88 Vestibule Lock †Latch retracted by key from outsidewhen outside lever is locked by key ininside lever. Inside lever always unlocked for immediate egress.

ND66PD F91 Store Lock † *Key in either lever locks or unlocksboth levers.

ND70PD F84 Classroom Lock †Outside lever locked and unlocked bykey. Inside lever always unlocked for immediate egress.

ND73PD F90 Corridor Lock †Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever always unlocked for immediate egress.

ND12D F89 Exit LockOutside lever always fixed. Insidelever always unlocked for immediate egress. Also available with Request to Exit (RX) function.

ND12DEL Electrically Locked (Fail Safe)Outside lever continuously lockedelectrically. Unlocked by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always always unlocked for immediate egress. Also available with Request to Exit (RX) function

† Keyed functions available with 6-pin (PD/LD), SFIC(GD/BD), or FSIC(RD/JD) cylinder.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

ND12DEU Electrically Unlocked (Fail Secure)Outside lever continuously lockeduntil unlocked by electric current.Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always unlocked for immediate egress. Also avail-able with Request to Exit (RX) function

ND25D F89 Exit LockBlank plate outside. Inside lever always unlocked for immediate egress.

ND40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside lever or closing doorreleases button. Inside lever is always free for immediate egress.

ND44S Hospital Privacy LockPush-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress.

ND170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

ND75PD F110 Classroom Security Lock †Key in either lever locks or unlocksoutside lever. Inside lever always unlocked for immediate egress.

ND-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Functions • ND LeversANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Keyed Locks SCHLAGE ANSI

Vandlgard Functions: Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress.

† Keyed functions available with 6-pin (PD/LD), SFIC(GD/BD), or FSIC(RD/JD) cylinders.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

** 85 function locks are not available in Full Size & Small Format Interchangeable Cores.

ND80PD F86 Storeroom Lock †Outside lever fixed. Entrance by key only. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function

ND80PDEL Electrically Locked (Fail Safe) †Outside lever continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function

ND80PDEU Electrically Unlocked (FailSecure) †Outside lever continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function

ND82PD F87 Institution Lock † *Both levers fixed. Entrance by key ineither lever.

ND91PD F82 Entrance/Office Lock †Push-button locking. Push-button disengages outside lever until unlocked with key or by turning inside lever.

ND92PD F109 Entrance Lock †Turn/push-button locking; pushing and turning button disengages outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button disengages outside lever until unlocked by key or by turning inside lever.

ND93PD F88 Vestibule Lock †Latch retracted by key from outside when outside lever is disengaged by key in inside lever. Inside lever is always unlocked for immediate egress.

ND94PD F84 Classroom Lock †Outside lever disengaged and unlocked by key. Inside lever always unlocked for immediate egress.

ND96PD F86 Storeroom Lock †Outside lever always disengaged. Entrance by key only. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX).

ND96PDEL Electrically Locked (Fail Safe) †Outside lever continuously disengaged electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress.

ND96PDEU Electrically Unlocked (Fail Secure) †Outside lever continuously disengaged until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress.

ND85PD F93 Faculty Restroom Lock **Outside lever fixed. Entrance by key only. Push-button in inside lever acti-vates visual “occupancy” indicator, allowing only emergency master key to operate. Turning inside lever or closing door releases visual occupancy indicator. Rotation of inside spinner-button by spanner key provides lock-out feature by keeping indicator thrown. Inside lever is always free for immediate egress.

ND95PD F110 Classroom Security Lock †Key in either lever locks or unlocksoutside lever. Inside lever is always unlocked for immediate egress.

Safe School Locks

ND97PD F90 Corridor Lock †Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever is always unlocked for immediate egress.

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-4

Specialty FunctionsND Levers • Functions

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Keyed Locks

ND25 x 80PD Storeroom Exit LockBlank plate outside. Key in fixed inside lever retracts latch. Specify per XN12-005.

ND25 x 70PD Classroom Exit LockBlank plate outside. Key locks or unlocks inside lever. Specify per XN12-004.

ND30D F77 Patio LockPush button locking. Turning inside lever or closing door releases button, preventing a lock-out. Inside lever always unlocked for immediate egress. Specify per XN12-007.

Time Out LockCaretaker SidePushing and holding button will lock inside lever (detention side) until released. Lever always retracts latch.Detention SideLever retracts latch unless outside but-ton is depressed. Vandlgard allows inside spindle to disengage from latchwhen locked.

ND60PD Vestibule with Closed Outside LeverSame as ND60 except outside lever is closed. Inside lever always unlocked for immediate egress. Specify per XN12-001.

ND70 x 80PD Classroom by Storeroom LockKey locks and unlocks outside lever. Key in fixed inside lever retracts latch. Specify per XN12-006.

ND72PD F80 Communicating LockKey in either lever locks and unlocks own lever. Specify per XN12-002.

ND72PD Vandlgard Communicating LockCommunicating, ND72, lock with Vandlgard. Key in either lever locks and unlocks own lever. Both inside and outside levers are clutching. Specify per XN12-003.

SCHLAGE ANSI

Non-Keyed Locks

Vandlgard Functions: Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress.

SCHLAGE ANSI

Keyed Locks

ND45

Pricing for all Speciality functions can be found on ND-11

ND-5Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-Levers Complete Locks • ND Levers

Notes: 1) Split designs and/or finishes are available. Split finishes are priced at the highest finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For ND30, ND72 and other special functions pricing, see page ND-11. 5) Split finish not available for ND25D 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

ND Levers Designs and Finishes ATH OME RHO SPA TLR 626 605 606 613 612 619 Function Description 625 643e KeylessND10S Passage $324 $336 $354 ND12D Exit, lever x leverND12D EL or EU* Electrically locked or unlocked 504 516 534

*AC locks: use 24V, 0.35 Amps. DC locks: use 24V, 0.15 Amps. Intermittent or continuous duty. ND25D Exit, blank plate x lever 324 336 354ND40S Privacy 374 386 404ND44S Privacy, hospitalND170 Single dummy 139 145 155 Keyed, Single CylinderND50PD Entrance/Office ND53PD EntranceND70PD Classroom $442 $454 $472 ND73PD CorridorND80PD Storeroom ND85PD** Faculty Restroom Lock 536 548 566

** Emergency keys must be ordered separately.ND91PD Vandlgard® Entrance/Office ND92PD Vandlgard® Entrance ND94PD Vandlgard® Classroom 483 495 513ND96PD Vandlgard® StoreroomND97PD Vandlgard® Corridor ND80PD EL or EU* Electrically locked or unlocked 592 604 622ND96PD EL or EU* Vandlgard® Electrically locked or unlocked 649 661 679

*AC locks: use 24V, 0.35 Amps. DC locks: use 24V, 0.15 Amps. Intermittent or continuous duty. Keyed, Double CylinderND60PD Vestibule ND66PD* StoreND75PD Classroom Security $525 $537 $555ND82PD* Institution ND93PD Vandlgard® Vestibule Classroom Security 567 579 597ND95PD Vandlgard® Classroom Security

* CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Athens (ATH) Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-6

ND Levers • Options Latches, Strikes

13-048Standard

13-047Standard

43-005

10-025Standard

10-013 10-016

Latches Hsg Specify Add to Backset Description Dia Springlatch Deadlatch Lock Price 2 3/8” Square corner, 1 1/8” x 2 1/4” – 14-047 N/C Square corner, 1 x 2 1/4” – 14-048 N/C 2 3/4” Square corner, 1 1/8” x 2 1/4”, standard 1” 13-048 13-047 N/C 2 3/4” Anti-friction fire door latch

– 14-042 $131.00 Square corner, 1 1/8” x 2 1/4”, 3/4” throw 3 3/4” Square corner, 1 1/8” x 2 1/4” 14-010 14-028 7.90 5” Backset extension link 43-005 24.00

Note: 5) For Electric Strike options, reference the System Accessories section of the Schlage Electronics Price Book. 6) Strikes with long lip lengths are sold as parts. See ND Parts: Special Parts.

Notes: 1) ND-Series backset links must be used with 2 3/4” backset latches. 2) Backset links require reinforcement when used in hollow metal doors. See ND-Levers Parts: Accessories. 3) Backset links over 5” are sold as parts. See ND-levers Parts: Special Parts. 4) All ND-Series latches require reinforcement when used on hollow metal doors. See ND-levers Parts: Accessories.

Strikes Add to Description Lip Length Specify Lock Price

Square corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-013 N/C 1 1/2” $5.70Square corner, T-strike, deep box, fire door latch 1 1/8” 10-016 N/CANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 10-025 N/CANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 10-025 10.60 Box for ANSI strike, must be specified — K510-066 N/C

1”

Shaded items are standard components and arefurnished with locks unless otherwise specified.

ND-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable CoreSmall Format Interchangeable Core Options • ND Levers

Athens (ATH)

Full Size Interchangeable Core Full Size Construction Core (ND85 not available with these options) Lever Styles ATH RHO SPA OME TLR Finishes 626 605 606 612 619 625 643e 613 Description Specify Price (per core)Full size core* R suffix Add to Lock Price Example: ND53RD RHO $28.00Full size construction core** T suffix Add to Lock Price Example: ND53TD ATH 28.00Less full size core J suffix Deduct from Example: ND53JD ATH Lock Price 25.00

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.

* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.

Note: 1) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying. 2) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)

Small Format Interchangeable CoreSmall Format Construction Core (ND85 not available with these options) Lever Styles ATH RHO SPA OME TLR Finishes 626 605 606 612 619 625 643e 613 Description Specify Price (per core)Everest® patented core* G Suffix $59.00 Example: ND53GD RHOSmall format construction core** H Suffix 32.00 Example: ND53HD RHOLess small format core B Suffix N/C Example: ND53BD RHOSmall format disposable core BDC Suffix N/C Example: ND53BDC RHO

Athens (ATH) Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-8

ND Levers • Options Competitor Core Compatiblity

Competitor Core Compatibility

Lever Styles ATH RHO SPA TLR

Finishes 626 613 6 Additional Leadtime 605 606 612 619 625 643e Description Specify Deduct from Lock Price Sargent Key in lever (similar to the one LD-SAR suffix $48.00

used in 10L & 11L, etc) Example: ND53LD-SAR RHOSargent Full Size Removable Core JD-SAR suffix 25.00

Example: ND53JD-SAR ATH Corbin Russwin Full Size removable Core JD-CO6 suffix 25.00

(6 pins) Example: ND53JD-CO6 SPA Yale Full Size removable core (6 pins) JD-YA6 suffix 25.00

or Medeco 31*0100 FSIC type Example: ND53JD-YA6 TLR

ND-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Locks Less Components,Non-Standard Door Thickness Options • ND Levers

Locks Less Components Deduct from Description Specify Lock PriceLess each lever LLL for lever design $17.40 Example: ND53PD LLL/RHO x ATHLess each rose LLL for rose design 9.90 Example: ND53PD RHO x RHO/LLLLess standard cylinder, single cylinder functions L suffix 48.00 Example: ND53LD SPALess standard cylinder, double cylinder functions C suffix 96.00 Example: ND66CD ATHLess indicator cylinder L suffix 71.00Faculty restroom function (ND85) Example: ND85LD RHOLess springlatch LLL for latch 18.40 Example: ND40S RHO 605 LLL 10-025Less deadlatch LLL for latch 24.30 Example: ND53PD SPA 626 LLL 10-025Less strike LLL for strike 3.40 Example: ND53PD ATH 612 13-047 LLLLock chassis and spring cages only Less all possible components Sum of all applicable Example: ND53LD LLL 626 LLL LLL, lever chassis deducts

Non-Standard Door Thickness Description Specify Add to Lock Price1 3/8” thick doors* $44.00Extended Inside (EI), over 2” – 6” Door thickness and how door is extended. 226.00Extended Outside (EO), over 2” – 6” Example: 3”, EO Extended Equally (EE), over 2 1/8” – 6” 372.00 Extended Differently (ED), over 2” – 6”

* To retrofit existing locks, 2 chassis spacers (XN12-012) are required. See ND-16.

Notes: 1) For ND85, EE range is from over 2” to 6”. EI, EO, and ED ranges are from over 1 7/8” to 6”. 2) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying. 3) Locks are furnished extended equally (EE) unless otherwise specified.

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-10

ND Levers • OptionsPrimus® / Primus XP, Tactile Warning,

Tamper Resistant Torx® Screws

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyND-Series Lever single cylinder lock and Lock less cylinder (use L suffix). Order Primus cylinder separately.Primus cylinder See Cylinders Example: 1 ea. ND91LD 1 ea. 20-765ND-Series Lever double cylinder lock and Lock less cylinders (use C suffix). Order Primus cylinders separately.Primus cylinder See Cylinders Example: 1 ea. ND82CD 2 ea. 20-565ND-Series Lever lock and Primus full size Lock less full size core (use J suffix). Order Primus core(s) separately.interchangeable core cylinder(s)* See Cylinders Example: 1 ea. ND73JD 1 ea. 20-740

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch and strike screws Torx Screws $15.30

Engraved Rose (word “LOCK” engraved on inside rose) Part Number Description Add to Lock PriceXN12-035* Engraved “LOCK” on inside rose (Rhodes)

$25.10XN12-045* Engraved “LOCK” on inside rose (Omega) * Available in 626 on the inside of a double cylinder function. Available on ND60, ND75 and ND95

XN12-035

Notes: 1) Tactile warning is applied to outside lever only unless otherwise specified. 2) 643e finish is not available for tactile offerings

Tactile Warning (knurling)

(RHO lever shown)

Tactile Warning Add to Lock Price Description Specify (per lever)Tactile Warning Preface design code 8AT for Athens, 8RO For Rhodes, trim 8SP for Sparta $34.10 (Not available on Omega )

ND-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Special Options,Request to Exit Options • ND Levers

Special Functions6 Extended Factory Lead Time Not subject to standard discount terms Specify Add to Description Lock Function “X” Number Lock Price ND25x80. Blank plate outside, fixed lever inside. Key in lever ND25x80 XN12-005 add $88.50 toretracts latch. ND80ND70x80. Key locks or unlocks outside lever. Key in fixed inside ND70x80 XN12-006 add 46.40 tolever retracts latch. ND82ND25x70. Blank plate outside. Key locks or unlocks inside lever. ND25x70 XN12-004 add 88.50 to ND70ND60 with closed outside lever. ND60 XN12-001 add 125.00 to ND70ND72. Double cylinder communicating lock. ND72 XN12-002 add 125.00 to ND70ND30D. Patio lock. ND30D XN12-007 add 125.00 to ND40SND72 with Vandlgard®. (Clutching levers on inside and ND72 Vandlgard® XN12-003 add 125.00 to outside levers.) ND94ND45 - Time out lock ND45 XN12-317 add 47.80 to ND91LD

Notes: 1) All above functions are available in standard cylinder, full-size interchangeable core or small format interchangeable cylinders. See page ND-4.

Request to Exit (RX) Feature Description Specify Add to Lock PriceRequest to Exit Feature (Available on the ND10, ND12, ND80 and ND96 families) Ready to be used in a Normally Open or Normally

N123-062 $145.00

Closed application.

6 Extended Factory Lead Time

(Specify 626AM)Description of Components Coated Specify Add to Lock Price Inside and Outside Lever and Rose Trim Specify 626AM $25.80

Antimicrobial Coating

Ordering notes for Antimicrobial Coatings: 1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. 2) Please specify 626AM on each line item requiring antimicrobial coating. 3) For ease of identification, a sticker will be applied to a non-visible location on product.

Lead Lining Description Specify Add to Lock PriceLead Lining XN12-307 $198.00

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-12

ND Levers • PartsLock Trim: Levers,

Levers and Related Parts, Roses

Levers and Related Parts, Standard Designs and Finishes ATH OME RHO SPA TLR 626 605 606 613 Part 612 619 Number Description 625 643e 03-030 Closed lever 03-031 Open lever $97.00 $99.00 $101.00 03-032 Full size core lever N523-127* Full size core driver, universal 2.10 2.10 2.1003-000 Small format core lever, all functions 97.00 99.00 101.00N523-091* Small format core driver 9.80 09-774* Small format core driver and spacer 10.90 D500-000** Small format core spacer 1.10

* Design and finish not required. ** 1 spacer required for 6-pin, no spacer required for 7-pin.

Note: 1) To convert locks from full size to small format, components are required in addition to small format core levers and drivers.

Roses Designs and Finishes 626 605 606 613 Part 612 619 Number Description 625 643e 03-042 Outside or inside rose $73.40 $75.40 $77.40 N523-002 Blank plate, ND25 70.50 72.50 74.50 XN12-035* Word “LOCK” engraved on inside rose (Rhodes) 90.90 XN12-045* Word “LOCK” engraved on inside rose (Omega) 90.90 * Available in 626 on the inside of a double cylinder function. Available on ND60, ND75 and ND95

ND-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Latches, Strikes Parts • ND Levers

13-048 13-047

* Specify lip length.

10-025 10-013 10-016

Strikes Part Specify Price Number Finish Description Lip Length Each

10-013* • Square corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” $8.50 1 1/2” 11.9010-016 • Square corner, T-strike, deep box, 1 1/8” x 2 3/4” 1 1/8” 17.40 Use with fire door latch10-025* • ANSI, no box, 1 1/4” x 4 7/8”, standard 1 3/16” 12.4010-025* • ANSI, no box, 1 1/4” x 4 7/8” 1 3/8”, 1 1/2” 33.00K510-066 Box for ANSI strike — 5.40

Latches Part Number Specify Hsg Price Springlatch Deadlatch Finish Backset Description Dia Each — 14-047 • 2 3/8” Square corner, 1 1/8” x 2 1/4” $85.10 — 14-048 • Square corner, 1” x 2 1/4” 13-048 13-047 • Square corner, 1 1/8” x 2 1/4”, standard 65.40 — 14-042 • 2 3/4” Anti-friction Fire Door Latch 1” 260.00 Square corner, 1 1/8” x 2 1/4”, 3/4” Throw 14-010 14-028 • 3 3/4” Square corner, 1 1/8” x 2 1/4” 78.40 — 43-005 • 5” Backset extension link 24.00 39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 41.80

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-14

ND Levers • Parts Reinforcements, Plunger Parts

Reinforcements — Must be used for hollow metal doors Part Price Number Description Each37-001* Metal door reinforcer kit, fits both 7/8” and 1” diameter housings $28.50A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings.

14.40A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings.

* Specify door thickness, includes A501-567 and A501-565 or A501-566.

Plunger Parts Part Specify Price Number Finish Description Each N123-017 Push and Turn Plunger Bar (ND53, ND85, ND92) $9.00 N123-028 Push Button Plunger Bar (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 48.90 N123-034 • Emergency Button and Plunger (ND40 outside) 50.50 N123-035 • Emergency Turn Button and Plunger (ND44 outside) 94.60 N523-000 • Push Button (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 7.10 N523-001 • Push and Turn Button (ND53, ND92) 13.50 N523-124 • Push Button w/Spanner Access (ND85) 8.00

Competitor Core Compatability Parts Part Price Number Description Each N123-064 Outside spring cage for Sargent key in lever $228.00 03-044 Open lever for Sargent key in lever 03-055 Open lever for Yale full size removable core (6 pins) 03-066 Open lever for Corbin Russwin full size removable core (6 pins)

183.00

03-077 Open lever for Sargent full size removable core N123-065 Outside spring cage for Yale (6 pins)full size removable core N123-066 Outside spring cage for Corbin-Russwin (6 pins) or Sargent full size removable core N123-067 Inside spring cage for Sargent key in lever 228.00 N123-068 Inside spring cage for Yale (6 pins) full size removable core N123-069 Inside spring cage for Corbin-Russwin (6 pins) or Sargent full size removable core N523-146 Tail piece for Sargent key in lever (not available in Omega design) 2.00 N523-147 Tail piece for Yale FSIC (not available in Omega design) 17.40 N523-148 Tail piece for Sargent and Corbin FSIC (not available in Omega design) 9.30 XN12-292 Tail piece for use with Sargent XC SFIC

ND-15Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts Parts • ND Levers

Miscellaneous Parts Part Price Number Description Each Keycam Assemblies N123-024 Electrified Keycam Assembly ND12EL/EU and ND80EL/EU $24.30 N123-025 Electrified Keycam Assembly ND96EL/EU 25.50 N123-045 Keycam Assembly ND40, ND44 5.20 N123-007 Keycam Assembly ND50, ND53, ND60 12.30 N123-009 Keycam Assembly ND66, ND75 Outside 71.90 N123-010 Keycam Assembly ND73, ND70, ND72, ND25x70, ND70x80 Outside 12.40 N123-059 Keycam Assembly ND75 Inside, ND95 Inside 53.50 N123-008 Keycam Assembly ND82, ND12, ND80, ND25x80, ND70x80 Inside 14.80 N123-055 Keycam Assembly ND85 71.90 N123-011 Keycam Assembly ND91, ND92, ND93 16.70 N123-012 Keycam Assembly ND94 16.70 N123-054 Keycam Assembly ND95 Outside 71.90 N123-013 Keycam Assembly ND96 13.70 N123-097 Keycam assembly ND97 13.90 N523-065 Cam pin for ND60 and ND93 3.80 N523-066 Cam for inside ND60 and ND93 40.90 Spring Cages N123-021 Inside spring cage for all double cylinder functions except SFIC $50.50 N123-022 Outside spring cage for all functions except SFIC and ND10 50.50 N123-032 Inside Spring Cage for all functions except double cylinder functions 36.40 N123-043 Outside spring cage ND10 42.80 N123-056 Outside spring cage for all SFIC functions 51.80 N123-057 Inside spring cage for all SFIC double cylinder functions 33.40 Slide & Related Parts C503-019 Slide Spring $5.20 C604-187 Slide Catch Restoring 5.70 C604-188 Slide Catch Non-restoring 5.70 C604-191 Slide Catch Spring 5.40 N523-025 Slide Clip 3.30 N523-149 Slide (previous part number was N523-024) 15.30 Spindles & Related Parts C604-340 Spindle Pin for ND170 $5.40 N523-013 Outside Spindle 8.60 N523-019 Outside Electrified Spindle 8.60 N523-056 Inside Spindle 2.80 N523-057 Inside Electrified Spindle 12.90 Miscellaneous Parts C303-439 AC Rectifier $53.30 C503-331 Plunger Spring (order in multiples of 50) 0.12 L583-454 Chassis Screw 1.10 N523-014 Outside Housing 8.50 N523-015 Inside Hub for all Non-electrified functions except the ND66 and ND82 3.70 N523-016 Inside Hub for ND66 & ND82 Functions 3.70 N523-017 Outside Electrified Housing 8.90 N523-018 Inside Electrified Hub 5.00 N523-020 Emergency cylinder for ND40 & ND44 functions 4.00 N523-026 Solenoid-EU 119.00 N523-027 Solenoid-EL 104.00 N523-028 Solenoid Retaining Clip for Electrified Functions 2.80 N523-029 Wire Clamp for Electrified Functions 22.80 N523-031 Sleeve for Electrified Functions 2.80 N523-033 Screw for Electrified Functions 2.00 N523-041 Catch stop 3.90 N523-054 Adjustment Plate 3.90 N523-055 Anti-rotation plate 3.90 N523-063 Plunger Sleeve for ND60 and ND93 2.80 N523-064 Plunger for ND60 and ND93 9.80 N523-067 Plunger Bar for ND66 2.80 N523-069 Dummy Insert for ND170 9.80 N523-105 Threaded rod for mounting ND170s as double dummy set 12.20

Price Book 74Effective March 4, 2013 • Rev. 3/13

ND-16

ND Levers • Parts Screws, Standard Screw Packs, Torx® Screw Packs, Special Parts

Screws Price Each Part Specify Door (Order in multiples Number Finish Description Thickness Type Size of 100) A501-171 • ND170, washer — Washer — $0.82 N523-092 • ND170, mounting screw 1 1/2” – 2” POH Machine 1/4” 20 x 2 1/2” 0.90 L583-133 • ND170, mounting surface — Sheet Metal 1#8 x 1” 0.66C603-256 • ANSI strike — PFH Combo 12-24 x 1” 0.76C603-897 • Latch and strike — PFH Combo #8 x 3/4” 0.88 N523-021 Spring cage screws 1 3/8” – 2” PFH Machine #10 x 32 x 2 1/8” 1.20

Screw Packs, Standard Part Specify Price Number Finish Description Contents Each B202-517 • Latch and strike (4) C603-897 $5.90

N123-020 • Mounting, all except ND170 (4) C603-897 6.60 (2) C603-256 (2) N523-021 (1) M504-271 N123-040 • Mounting, ND170 (2) L583-133 7.40 (1) N523-092 (1) A501-171 (1) M504-271

C203-736 • ANSI strike (2) C603-256 5.00

Screw Packs, Torx®

Part Specify Price Number Finish Description Contents EachC203-311 • Latch and strike (4) C503-766 (T-15)

$15.30C203-312 • Latch and ANSI strike (2) C503-766 (T-15) (2) L583-371 (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Price Number Finish Description EachXQ02-309* • 10-013 Strike, 7/8” flat lip $20.40

XQ03-494* • 10-013 Strike, 1 5/8” – 6” lip 91.50 10-013 Strike, 6 1/8” – 12” lip 117.00

XQ07-351* • 10-025 Strike, 7/8” flat lip 21.60 10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”, 3/8” and 1 1/2”) 105.00XC03-069 • Extension links, backsets over 5” – 42” 410.00XN12-012 • Chassis Spacer for 1 3/8” door (2 required) 44.50

* Specify lip length.

H-1Price Book 74Effective March 4, 2013 • Rev. 3/13

HIntroduction

Table of ContentsFunctions H-2Complete Locks H-3 H-Series Knob and Lever Designs . . . . . . . . H-3Options H-4 Deadbolt/Latch Combinations . . . . . . . . . . . H-4 Deadbolt Strikes . . . . . . . . . . . . . . . . . . . . . . H-5 Latch Strikes . . . . . . . . . . . . . . . . . . . . . . . . . H-5 Strike Combinations . . . . . . . . . . . . . . . . . . . H-5 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . . . H-6 Locks Less Components . . . . . . . . . . . . . . . H-7 Non-Standard Door Prep . . . . . . . . . . . . . . . H-8 Non-Standard Door Thickness . . . . . . . . . . . . H-8 Primus® / Primus XP . . . . . . . . . . . . . . . . . . . H-8Parts H-9 Knobs and Levers, Standard . . . . . . . . . . . . H-9 Knobs and Related Parts, Interchangeable Core . . . . . . . . . . . . . . . . . . H-9 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-9 Escutcheons . . . . . . . . . . . . . . . . . . . . . . . . H-9 Deadbolt/Latch Combinations . . . . . . . . . . H-10 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . H-10 Deadbolt Strikes . . . . . . . . . . . . . . . . . . . . H-11 Latch Strikes . . . . . . . . . . . . . . . . . . . . . . . . H-11 Deadbolt/Latch Strike Combinations . . . . . H-11 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . H-12 Backset Links and Reinforcements . . . . . . H-12 Miscellaneous Parts . . . . . . . . . . . . . . . . . . H-13 Plunger Units . . . . . . . . . . . . . . . . . . . . . . . H-13 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-14Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification H 153 6 H

Door Prep. Suffix No suffix = 1 1/2” Dia Deadbolt Hole H = 2 1/8” Dia Deadbolt Hole

Cylinder Suffix 6 = 6-Pin Cylinder(s) L = Less Standard Cylinder(s) L6 = Less 6-Pin Cylinder(s) R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core

Function

Lock Series

Finish Codes and DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated

Standard Features*H Knobs and LeversCertification ANSI A156.12 1999. UL Listed for 3-hour fire door.Deadbolt 1” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throwLatch 1” x 2 1/4”, Square corner faceplate, 7/8” housing diameter, 1/2” throwStrikes 1 1/8” x 2 3/4” Square corner, box (deadbolt) and 1 1/8” x 2 3/4”, square corner T-strike, box (latch)Reinforcement Door frame strike reinforcer with 3” screws Backset 2 3/8”Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, S123 keyway, keyed different (KD), upper and lower cylinders are keyed alike**Door Range 1 3/8” – 1 3/4”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with 5-pin upper cylinder, with upper and lower cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-2

H • Functions

ANSI A156.12 1999. UL Listed for 3-hour fire door.

SCHLAGE ANSI

H110 F95 Entrance, Single LockingDeadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Latchbolt retracted by knob/leverfrom either side. Inside knob/leverretracts deadbolt and deadlatchsimultaneously for immediate exit.

H153 F97 Entrance, Double LockingDeadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Deadlatch retracted by key in outerknob when locked by pushing turn- button in inner knob/lever. Outer knobmay be fixed in locked position byrotating turn-button. Inside knob/leverretracts deadbolt and deadlatchsimultaneously for immediate exit.

H180 F98 Storeroom LockDeadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown. Outside knob is fixed.Entrance by key only. Turning insideknob/lever retracts deadbolt and latchsimultaneously for immediate exit.

H170 Single Dummy Inside TrimSnap-on rose and knob/lever.Concealed mounting screws.

Interconnected Locks

SCHLAGE ANSI

H185 F100 Hotel-Motel Lock*Deadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Deadlatch retracted by key in outerfixed knob. Push-button in inner knob/lever activates visual occupancyindicator, allowing only emergencymasterkey to operate. Turning insideknob/lever or closing door releasesvisual occupancy indicator. Rotationof inside spanner-button provideslockout feature by keeping indicatorthrown. Turning inside knob/leverretracts deadbolt simultaneously forimmediate exit.

Interconnected Locks

H-3Price Book 74Effective March 4, 2013 • Rev. 3/13

H-Series Complete Locks • H

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

H-Series Designs and Finishes ORB PLY LEV* 605 612 625 626 6 Additional Leadtime 613Function Description 606 609KeylessH170 Single dummy $231 $243 $261Keyed, Single and Double LockingH110 Entrance H153** Entrance $354 $366 $384H180** StoreroomH185** Hotel-Motel* Levon (LEV) only available as inside trim on double locking functions ** Double Locking functions (Lever and Deadbolt)

Levon (LEV) * Orbit (ORB) Plymouth (PLY)

* LEV lever is available as inside trim only on keyed, double locking functions. Not available in 606 and 609.

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-4

H • Options Deadbolt/Latch Combinations

19-071Standard

19-077Standard

Deadbolt/Latch Combinations Specify Hsg Combo Add to Backset Description Dia Latch Deadbolt Number Lock PriceDeadbolt/Springlatch Combinations for Single Locking Functions (H110 ) Square corner , 1” X 2-1/4” 11-068 12-288 19-071 2-3/8” Round corner , 1” X 2-1/4” 11-069 12-289 19-072 Circular, drive-in, 626 only for bolt, 605 and 626 only for latch 1”

11-110 12-290 19-073 N/C

Square corner , 1” X 2-1/4” 11-111 12-288 19-074 2-3/4” Round corner , 1” X 2-1/4” 11-112 12-289 19-075 Circular, drive-in, 626 only for bolt, 605 and 626 only for latch

11-113 12-290 19-076

Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H180, H185) Square corner , 1” X 2-1/4” 11-085 12-288 19-077 2-3/8” Round corner , 1” X 2-1/4” 11-088 12-289 19-078 Circular, drive-in, 626 only for bolt, 605 and 626 only for latch 1” 11-104 12-290 19-079 N/C Square corner , 1” X 2-1/4” 11-091 12-288 19-080 2-3/4” Round corner , 1” X 2-1/4” 11-092 12-289 19-081 Circular, drive-in, 626 only for bolt, 605 and 626 only for latch

11-105 12-290 19-082

* Latch has a fixed backset; Deadbolt is adjustable between 2-3/8” to 2-3/4” out of the box

Shaded items are standard components and arefurnished with locks unless otherwise specified.

H-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadbolt Strikes, Latch Strikes, Strike Combinations Options • H

Shaded items are standard components and arefurnished with locks unless otherwise specified.

10-055Standard

10-064 10-092 10-095

10-001Standard

10-026 10-027 10-058

Deadbolt Strikes Add to Description Lip Length Specify Lock PriceSquare corner, box, 1 1/8” x 2 3/4”, standard — 10-055Circular drive-in, thimble-strike, 1 3/16” diameter, 494 (for 626) only 10-064 N/C 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-092Square corner, full lip, no box, 1 5/8” x 2 1/4” 10-095

Latch Strikes Add to Description Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 10-0011/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-004Square corner, full lip, no box, 1 5/8” x 2 1/4” 10-026 N/C1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 10-027Circular, adjustable, 1 3/4” diameter, 605 and 626 only 1 7/32” 10-058

Strike Combinations Specify Latch Deadbolt Combo Add to Strike Strike Number Lock Price 10-001, 1 1/8” Lip 10-055 10-250 10-001, 1 1/8” Lip 10-064 10-251 10-026 10-055 10-252 10-026 10-064 10-253 10-027 10-055 10-255 N/C 10-027 10-064 10-256 10-027 10-092 10-257 10-058 10-064 10-258 10-026 10-095 10-259

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-6

H • OptionsFull Size Interchangeable Core,

Full Size Construction Core

Orbit (ORB)

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price All interchangeable core(s) $28.00 Example: H153R ORB

R1 suffix Lower interchangeable core with 6-pin upper cylinder Example: H153R1 ORB

R2 suffix Upper interchangeable core with 6-pin lower cylinder Example: H153R2 ORBFull size construction core** T suffix Add to Lock Price All construction core(s) 28.00 Example: H110T ORBLess full size core J suffix Deduct from Less all interchangeable core(s) Lock Price Example: H153J ORB 25.00

J1 suffix Less lower interchangeable core with 6-pin upper cylinder Example: H153J1 ORB

J2 suffix Less upper interchangeable core with 6-pin lower cylinder Example: H153J2 ORB

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Available ORB design only for all functions except H110. All designs available for H110 function. 3) Full size interchangeable core is not available for H185.

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Available in: 605 606 609 612 613 625

626

H-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Locks Less Components Options • H

* Chassis for non-ORB designs is furnished unless ORB design is specified. Includes housing and linkage.

Locks Less Components Description Specify Deduct from Lock PriceLess each knob or lever LLL for knob or lever design $7.10 Example: H153 LLL/PLY x PLY

Less each rose or escutcheon LLL for rose or escutcheon design 5.50 Example: H153 PLY x PLY/LLL

Less 5-Pin upper and 6-Pin lower L suffix 48.00 each cylcylinder(s) Example: H153L PLYLess 6-Pin upper and lower cylinder(s) L6 suffix 48.00 each cyl Example: H153L6 PLY

Less cylinders, Hotel function (H185) L suffix 119.00 Example: H185L PLY

Less deadbolt LLL for deadbolt 10.90 Example: H153 PLY 626 LLL/11-068 10-250

Less springlatch LLL for springlatch 9.10 Example: H110 PLY 606 12-228/LLL 10-250

Less deadlatch LLL for deadlatch 15.30 Example: H153 PLY 626 12-288/LLL 10-250

Less deadbolt strike LLL for deadbolt strike 4.20 Example: H153 PLY 613 19-057 LLL 10-001

Less latch strike LLL for latch strike 3.40 Example: H153 PLY 613 19-057 10-055/LLL

Lock chassis only* LLL for all possible components Sum of all applicable Example: H153L LLL 626 LLL LLL deducts, use PLY design for base price

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-8

H • OptionsNon-Standard Door Prep., Non-Standard

Door Thickness, Primus® / Primus XP, Non-Standard Finishes

Non-Standard Door Prep. Description Specify Add to Lock PricePreparation for 2 1/8” diameter deadbolt hole H suffix* $11.20 Example: H110H ORB 626

Non-Standard Door Thickness Description Specify Add to Lock PriceExtended Inside (EI), from 2” – 2 1/2” Door thickness and how door is extended $50.50 Example: 2”, EI

* Includes 38-031 adapter ring and G570-130 plate.

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyH-Series keyed single locking lock and Primus Lock less cylinder (use L6 suffix). Order Primus cylinder separately.cylinder See Cylinders Example: 1 ea. H110L6 1 ea. 20-729H-Series keyed double locking lock and Primus Lock less cylinders (use L6 suffix). Order Primus cylinders separately.cylinders See Cylinders Example: 1 ea. H153L6 1 ea. 20-529 1 ea. 20-524H-Series lock and Primus full size interchangeable Lock less full size core(s) (use J suffix). Order Primus core(s)core cylinder(s) separately. See Cylinders Example: 1 ea. H180J 2 ea. 20-740

Note: 1) Locks are furnished extended inside (EI) only.

Note: 2) Primus is not available for Hotel-Motel function (H185).

H-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Lock Trim: Knobs and Levers, Knobs and Related Parts,Interchangeable Core, Roses, Escutcheons Parts • H

Knobs and Levers, Standard Designs and Finishes LEV ORB* PLY Part 626 605 613 Number Description 01-008 Closed knob or lever $27.10 $30.10 $35.10 01-009 Open knob or lever 01-018 Cylinder knob and sleeve 38.90 41.90 46.90 01-081 Sleeve for cylinder knob 7.70 — —

* ORB knob requires modified chassis.

* Design and finish not required.

Escutcheons Designs and Finishes MET Part Number Description 626 605 61307-057 Inside escutcheon and turn $88.30 $90.30 $92.3007-035 Inside escutcheon, dummy - H170 61.60 63.60 65.6036-056 Outside trim, tie-in escutcheon 29.50 31.50 33.50

Knobs and Related Parts, Interchangeable Core Designs and Finishes ORB Part 626 605 613 Number Description 01-026 Full size core knob $53.40 $56.40 $61.40 01-053* Full size core driver and retainer 9.90 A501-941* Full size core retainer 3.20 C604-307* Full size core driver, universal 7.10

* Not available for 01-001 ORB

Roses Designs and Finishes PLY TUL GEO (use for LEV) (use for ORB) 605 609 Part 612 613 Number Description 626 625* 63001-001 Outside Rose $19.60 $22.60 $27.60

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-10

H • Parts Deadbolt/Latch Combinations, Deadbolts

19-071 19-077 19-079

Deadbolt/Latch Combinations Combo Specify Hsg Price Number Finish Backset Description Dia Latch Deadbolt EachDeadbolt/Springlatch Combinations for Single Locking Functions (H110)19-071 * Square corner , 1” X 2-1/4” 11-068 12-288 19-072 * 2-3/8” Round corner , 1” X 2-1/4” 11-069 12-289 19-073 * Circular, drive-in, 626 only for bolt

1” 11-110 12-290 $75.30

19-074 * Square corner , 1” X 2-1/4” 11-111 12-288 19-075 * 2-3/4” Round corner , 1” X 2-1/4” 11-112 12-289 19-076 * Circular, drive-in, 626 only for bolt 11-113 12-290 Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H185)19-077 * Square corner , 1” X 2-1/4” 11-085 12-288 19-078 * 2-3/8” Round corner , 1” X 2-1/4” 11-088 12-289 19-079 * Circular, drive-in, 626 only for bolt 1” 11-104 12-290 $75.3019-080 * Square corner , 1” X 2-1/4” 11-091 12-288 19-081 * 2-3/4” Round corner , 1” X 2-1/4” 11-092 12-289 19-082 * Circular, drive-in, 626 only for bolt 11-105 12-290

* Includes A501-878 latch front adapter and G506-815 housing sleeve for latch ** Latch has a fixed backset; Deadbolt is adjustable between 2-3/8” to 2-3/4” out of the box

* Includes A501-878 latch front adapter and G506-815 housing sleeve.

Deadbolts Part Specify Hsg Price Number Finish Backset Description Dia Each12-288 * 2-3/8” Square corner , 1” X 2-1/4” 12-289 * to Round corner , 1” X 2-1/4” 1” $31.7012-290 * 2-3/4” Circular, drive-in, 626 only for bolt

Note: 1) To price latches separately, see A: Parts. To price deadbolts separately, see below.

H-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadbolt Strikes, Latch Strikes, Deadbolt/LatchStrike Combinations Parts • H

10-055 10-064 10-092 10-095

10-001 10-026 10-027 10-058

Deadbolt Strikes Part Specify Lip Price Number Finish Description Length Each10-055 • Square corner, box, 1 1/8” x 2 3/4”, standard — $14.3010-064 • Circular drive-in, thimble strike, 1 3/16” diameter, 494 (for 626) only 12.1010-092 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.80 10-095 • Square corner, full lip, no box, 1 5/8” x 2 1/4”

Latch Strikes Part Specify Lip Price Number Finish Description Length Each10-001 • Square corner, T-strike, box, 1 1/8” x 2 3/4”, standard $8.0010-004 • 1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 8.6010-026 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 7.7010-027 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”10-058 • Circular, adjustable, 1 3/4” diameter, 605 or 626 only 1 7/32” 11.10

Deadbolt/Latch Strike Combinations Part Specify Price Number Finish Deadbolt Strike Latch Strike Each10-250 • 10-055 10-001, 1 1/8” Lip $21.9010-251 • 10-064 10-001, 1 1/8” Lip 20.9010-252 • 10-055 10-026 21.7010-253 • 10-064 10-026 19.3010-255 • 10-055 10-027 21.7010-256 • 10-064 10-027 20.7010-257 • 10-092 10-027 16.1010-258 • 10-064 10-058 24.3010-259 • 10-095 10-026 16.10

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-12

H • Parts Adapters, Backset Links and Reinforcements

A501-878 G506-815

Adapters Part Price Number Description EachA501-878 Latch front adapter (use with 1” faceplate in 1 1/8” door prep.) Order in multiples of 100 $0.54G506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.60

A501-565

Backset Links and Reinforcements Part Price Number Description Each37-001* Metal door reinforcer kit, fits both 7/8” and 1” diameter housings $28.50A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings. 14.40A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings.G506-815 1” Long latch housing sleeve to adapt 7/8” housing to 1” bore 5.60

* Specify door thickness; includes A501-567 and A501-565 or A501-566.

H-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts, Plunger Units, Dimension Chart: Plunger Units Parts • H

Miscellaneous Parts Part Price Number Description EachA201-370 Cam & driver - H180 $7.20A201-399 Hub & cap, out. - H153, H180, H185 22.40A201-406 Hub & cap, out. - H110 A301-386 Spindle & catch, ins. A301-387 Spindle & catch, out. 7.30A301-402 Cam unit, out. - H153, H185 A501-305 Hub plate, ins. 5.70A501-615 Spindle wedge - H180, H185 5.50A501-710 Swivel sleeve - H185 A501-901 Plate, out. - H180, H185 3.80A508-399 Plate, out. - H110, H153 A508-597 Spring separator - H153, H180, H185 5.50A508-598 Frame 8.70A508-600 Housing 12.10A508-605 Slide spring A590-158 Slide, restoring - H185 A590-159 Slide, non-restoring - H153, H180

5.50

A590-181 Slide, non-restoring - H110 C503-008 Cotter pin Order in multiples of 100 0.50G105-209 Housing and spindle, RH inside, dummy - H170 21.70G105-023 Housing and linkage 85.10G105-249 Housing and spindle, LH inside, dummy - H170 21.70G570-232 Plug, spindle - H110 10.10

Plunger Units Part Specify Price Number Finish Description Each01-060 • Plunger unit, ins. - H153 $11.7001-063 • Plunger unit, ins. - H185 25.70

Note: 1) Specify dimension for all plunger units. See chart below for dimension.

Dimension Chart: Plunger Units Number Design Door Range Dim Non-ORB 1 3/8” – 1 7/8” 360 over 1 7/8” – 2 1/4”, EI 424

01-060 over 2 1/4” – 2 1/2”, EI 449 ORB 1 3/8” – 1 7/8” 428 over 1 7/8” – 2 1/4”, EI 492 over 2 1/4” – 2 1/2”, EI 517 Non-ORB 1 3/8” – 1 7/8” 363 over 1 7/8” – 2 1/4”, EI 427

01-063 over 2 1/4” – 2 1/2”, EI 452 ORB 1 3/8” – 1 7/8” 431 over 1 7/8” – 2 1/4”, EI 497 over 2 1/4” – 2 1/2”, EI 520

Price Book 74Effective March 4, 2013 • Rev. 3/13

H-14

H • Parts Screws

Screws Price Each Part Door (order in Number Description Thickness Type Size multiples of 100)A501-818 Mounting screw, upper cylinder 5-pin, — POH 10-32 x 2 1/16” $0.84 2 required Mach.E505-315 Mounting screw, lower chassis 2 required — POH 10-32 x 1 1/2” 0.98 Mach.E505-366 Mounting screw, upper cylinder 6-pin, — POH 10-32 x 2 5/16” 0.82 2 required Mach.

L-1Price Book 74Effective March 4, 2013 • Rev. 3/13

LIntroduction

Table of ContentsFunctions L-2Complete Locks L-10 A or B Rose Trim, Anti-Ligature . . . . . . . . . . . . . . . L10 L Escutcheon Trim . . . . . . . . . . . . . . . . . . . . . . . . .L-12 N Escutcheon Trim . . . . . . . . . . . . . . . . . . . . . . . . .L-14 Decorative Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .L-16 danmark Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-18 Commercial Lever Suites . . . . . . . . . . . . . . . . . . . .L-20 L9000 & L400-Series Deadbolt Locks . . . . . . . . . .L-21Options L-22 Armor Fronts, L9000-Series . . . . . . . . . . . . . . . . . .L-22 Strikes, L9000-Series . . . . . . . . . . . . . . . . . . . . . . .L-22 Strikes, L400-Series . . . . . . . . . . . . . . . . . . . . . . . .L-23 ADA Thumbturn . . . . . . . . . . . . . . . . . . . . . . . . . . .L-23 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . . . . . . . .L-24 Small Format Interchangeable Core Small Format Construction Core . . . . . . . . . . . . . .L-24 Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-24 Locks Less Components . . . . . . . . . . . . . . . . . . . . .L-25 Non-Standard Door Thickness . . . . . . . . . . . . . . . .L-26 Primus® / Primus XP, Request to Exit (RX) Feature . .L-26 Vandlgard Option . . . . . . . . . . . . . . . . . . . . . . . . .L-27 Tactile Warning, Tamper Resistant Torx® Screws .L-27 Folger Adam® Lever Trak™ . . . . . . . . . . . . . . . . . . .L-27 Special Options . . . . . . . . . . . . . . . . . . . . . . . . . . L-28Distributor Pack Program L-29 Lock Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-30 Trim Set Combinations . . . . . . . . . . . . . . . . . . . . . L-31 Armor Fronts, Strikes, Cylinders . . . . . . . . . . . . . L-32 Escutcheon Bolts, Mounting Posts, Mounting Screws . . . . . . . . . . . . . . . . . . . . . . . . . L-33Parts L-34 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-34 Outside Knob/Lever and Rose/Escutcheon Assemblies, Armor Fronts . . . . . . . . . . . . . . . . . . L-36 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-37 Buttons & Thumbturns, Cylinder Turns . . . . . . . . L-38 Occupancy Indicators . . . . . . . . . . . . . . . . . . . . . L-38 Escutcheon Thru-Bolts . . . . . . . . . . . . . . . . . . . . . L-39 Mounting Posts, Spindles and Springs . . . . . . . . .L-39 Electrified Lock Kits . . . . . . . . . . . . . . . . . . . . . . . L-39 Lock Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-40 Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . L-41 Anti-Ligature Conversion Kits . . . . . . . . . . . . . . . . .L-42 Classroom Security Function Conversion Kits . . . .L-43 Screw Packs, Special Parts . . . . . . . . . . . . . . . . . L-44Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification L/LV 9 4 53 P

Cylinder Suffix P = 6-Pin Full Face Mortise Cylinder with Schlage Logo* L = Less Full Face Cylinder C = Concealed Mortise Cylinder W = Less Concealed Cylinder R = Full Size Interchangeable Core with Schlage Logo J = Less Full Size Interchangeable Core F = Full Size Interchangeable Core Less Schlage Logo T = Full Size Construction Core BD = Less SFIC BDC = Disposable SFIC GD = Everest 29 Patented SFIC HD = Construction SFIC Function 0 = No Deadbolt 1 = Dummy Trim 4 = With Deadbolt 0 = Dummy Trim without Lock Case 9 = Functions with Lock Case Lock Series Prefix L = Standard LV = Vandlgard

Finish Codes and DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AM Antimicrobial Coating on Satin Chromium 629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel 630AM Antimicrobial Coating on Satin Stainless Steel 643e (US 11) Aged Bronze

Standard Features*Certifications L/LV9000: ANSI/BHMA Certified A156.13-2005, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077). With FSIC Interchangeable Core Cylinders: Grade 2 Security. With SFIC Interchangeable Core Cylinders: Grade 3 Security. L400: ANSI/BHMA Certified A156.5-2001, Grade 1, UL Listed for 3-hour fire door.Case Size L/LV9000: 4 7/16” x 6 1/16” x 1”; L400: 4 7/16” x 3 5/8” x 1”Armor Front L/LV9000: 1 1/4” x 8”; L400: 1 1/4” x 5 9/16”Deadbolt 1” Throw stainless steelLatchbolt 3/4” Throw stainless steel with anti-friction tongueStrike L/LV9000: 1 1/4” x 4 7/8” Square corner, 1 3/16” lip, box; L400: 1 1/8” x 3 5/8” square corner, boxBackset 2 3/4”Cylinder *** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/4”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

SFIC = Small Format (Best® Style) Interchangeable Core

BAA/ARRA Contact your local SSC or

Sales Rep. for ordering details

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-2

L • Functions

ANSI/BHMA Certified A156.13-2005, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077).

SCHLAGE ANSI

Mortise Locks Non-Keyed Mortise Locks Non-Keyed Dummy

L9010 F01 Passage LatchLatchbolt retracted by knob/leverfrom either side at all times. Inside knob/lever is always free for immediate egress.

SCHLAGE ANSI

L0172 Full Dummy TrimKnob/lever on both sides fixed by mounting bar.

L9175 Half Dummy Trim w/ Lock CaseFixed knob/lever on one side inoperable. Includes lock case and armored front. Options same as L9176 below.

L9176 Full Dummy Trim w/ Lock Case*Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL11-743 armored front with cutout to receive deadbolt.

L9040 F22LV9040

Bath/Bedroom Privacy LockLatchbolt retracted by knob/leverfrom either side unless outside is locked by inside thumbturn.Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside, remove emergency button, insert emergency thumbturn(furnished) in access hole and rotate. Inside knob/lever is always free for immediate egress.

L9044LV9044

Privacy With Coin Turn OutsideLatchbolt retracted by knob/leverfrom either side unless outside islocked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever.Specify per L283-056 for Torx®

screws. Available with rose trim only.

L9440 F19LV9440

Privacy With DeadboltLatchbolt retracted by knob/leverfrom either side. Deadbolt thrown or retracted by inside thumbturn.Throwing deadbolt locks outsideknob/lever. Rotating inside knob/lever simultaneously retracts dead-bolt and latchbolt, and unlocks outside knob/lever. To unlock from outside, remove emergency but-ton, insert emergency thumbturn in access hole and rotate. Inside knob/lever is always free for immediate egress.

L9444LV9444

Privacy With Deadbolt and Coin Turn OutsideLatchbolt retracted by knob/leverfrom either side. Deadbolt thrown orretracted by inside thumbturn oroutside coin turn. Throwing deadboltlocks outside knob/lever. Rotatinginside knob/lever simultaneouslyretracts deadbolt and latchbolt, andunlocks outside knob/lever. Rotatingoutside coin turn retracts deadbolt and unlocks outside knob/lever. Specify per L283-056 for Torx screws. Available with rose trim only. Inside knob/lever is always free for immediate egress.

L0170 Half Dummy TrimKnob/lever on one side fixed bymounting bar. Not for use on wood doors, recommend L9175.

* In a double door application where the dummy will be used as the strike, order 10-091 Armored Front Strike separately.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

L-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Functions • L

L9050 F04LV9050

Entrance/Office LockLatchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9056LV9056

L9050 With Automatic UnlockingLatchbolt retracted by knob/lever from either side unless outside is made inopera-tive by key outside or by rotating inside thumbturn. Outside knob/lever unlockedby key outside or thumbturn. Rotating inside knob/lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9070 F05LV9070

Classroom LockLatchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9076 F06LV9076

Classroom Holdback LockLatchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/lever and turn key 360º for holdback feature. Inside lever is always free for immediate egress.

L9080 F07LV9080

Storeroom LockLatchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9080ELLV9080EL

Electrically Locked (Fail Safe)Outside knob/lever continuously locked by 24V AC or DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outsideknob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

SCHLAGE ANSI

Mortise Locks-Keyed Mortise Locks-Keyed

SCHLAGE ANSI

L9080EULV9080EU

Electrically Unlocked (Fail Secure)Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9080EL-RXL9080EU-RXLV9080EL-RXLV9080EU-RX

Request To Exit (RX) Electrified LockSame as L9080EL and L9080EUfunctions. In addition, a micro switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/lever rotates the retractor hub. The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress. Specify L283-263 with L functions. Specify L283-239 with LV functions. Inside knob/lever is always free for immediate egress.

L9060 F09LV9060

Apartment Entrance LockLatchbolt retracted by knob/lever from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latch-bolt when door is locked. Inside knob/lever is always free for immediate egress.

L9071 F32LV9071

Classroom Security LockLatchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. Available with lock indicator on inside per XL11-986.

L9077LV9077

Classroom Security Holdback LockLatchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/lever and turn key 360º for holdback feature. Inside knob/lever is always free for immediate egress.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-4

L • Functions

SCHLAGE ANSI

Mortise Locks-Keyed

L9082 F30LV9082

Institution Lock*Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Auxiliary latch deadlockslatchbolt when door is locked.

L9082ELL9082EU

L9082 Electrically Locked orElectrically Unlocked Both Sides*EL: Outside and inside knob or levercontinually locked electrically.Latchbolt retracted by key either side. Switch or power failure allows outside and inside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. EU: Outside and inside knob/lever unlocked electrically. Latchbolt retracted by key either side. Switch or power failure keeps inside and outside knob/lever locked. Auxiliary latch deadlocks latchbolt when door is locked. (Previously XL11-452)

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

L-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Functions • L

L9453 F20LV9453

Entrance/Office Lock with DeadboltLatchbolt retracted by knob/lever from either side unless outside is locked by 20° rotation of thumbturn. Deadbolt thrown or retracted by 90° rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/lever remains locked until thumb-turn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9456 F13LV9456

Corridor LockLatchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside knob/lever is always free for immediate egress.

L9465 Closet/Storeroom LockLatchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside.

L9473 F21 Dormitory/Bedroom LockLatchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or thumbturn inside.

SCHLAGE ANSI

Mortise Locks-Keyed with Deadbolt Mortise Locks-Keyed with Deadbolt

L9457 F33LV9457

Classroom Security Lock w/ DeadboltLatchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside knob/lever is always free for immediate egress. Available with lock indicator on inside per XL11-986

L9466 F14 Store/Utility Room Lock*Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

L9458 F34LV9458

Classroom Security Lock w/Deadbolt and Auxiliary LatchLatchbolt operated by lever from either side except when outside lever is lock from inside or outside by key. Deadbolt retracted by key from inside or outside. Operating inside lever retracts both bolts and unlocks outside. Auxiliary deadlatch when door is locked. Inside knob/lever is always free for immediate egress.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-6

L • Functions

Mortise Locks-Keyed with Deadbolt

SCHLAGE ANSI SCHLAGE ANSI

Mortise Locks-Keyed with Deadbolt

L9480LV9480

Storeroom Lock With DeadboltLatchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

L9485LV9485

Faculty Restroom LockLatchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, all keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

DO NOT DISTURB

L9486 F15LV9486

Faculty Restroom Lock with“Do Not Disturb” IndicatorLatchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, “DO NOT DISTURB” plate is displayed. All keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

OCCUPIED

L9486 x L583-375LV9486 x L583-375

L9486 With “OCCUPIED” IndicatorLatchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, “OCCUPIED” plate is displayed and all keys become inoperative except emergency keys. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

OCCUPIED

L9496LV9496

Privacy With “OCCUPIED” IndicatorKnob/lever retracts latchbolt from either side. Deadbolt thrown or retracted by key outside (retraction by key required in the event of an emergency) or inside thumbturn. Throwing deadbolt locks outside knob/lever and displays “OCCUPIED” plate. Rotating inside knob/lever simultaneously retracts both deadbolt and latchbolt and unlocks outside knob/lever.Inside lever is always free for immediate egress.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

L-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Functions • L

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

SCHLAGE ANSI

Mortise Locks-Keyed Deadbolts

SCHLAGE ANSI

Mortise Locks-Small Case Deadbolts

L9460 F17 Cylinder x Thumbturn LockDeadbolt thrown or retracted by keyoutside or thumbturn inside.

L460 E06071 Cylinder x Thumbturn LockDeadbolt thrown or retracted by key outside or thumbturn inside.

L462 E06061 Double Cylinder Lock*Deadbolt operated by key from either side.

L463 E06091 Classroom LockDeadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt but cannot project it.

L464 E06081 Cylinder LockDeadbolt thrown or retracted by key from one side. No trim on opposite side.

L480 Door BoltDeadbolt thrown or retracted bythumbturn from one side. No trim on opposite side.

OCCUPIED

L496 Deadbolt With “OCCUPIED” IndicatorDeadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown “OCCUPIED” plate is displayed.

L9462 F16 Double Cylinder Lock*Deadbolt operated by key from either side.

L9463 F29 Classroom LockDeadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt but cannot project it.

L9464 F18 Cylinder LockDeadbolt thrown or retracted by key from one side. No trim on opposite side.

ANSI/BHMA Certified A156.5-2001, Grade 1,UL Listed for 3-hour fire door.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-8

SCHLAGE

Special Functions

SCHLAGE

Special Functions

L9110 x XL11-741 Double Dummy With Active TrimKnob/lever both sides always active.Includes lock case and armor front.Specify per XL11-741. May beordered with optional XL11-743armor front with cutout to receivedeadbolt only.

L9482 x XL11-543LV9482

Institution Lock With Deadbolt*Latchbolt retracted by key from eitherside. Knob/lever on both sides alwaysinoperative. Deadbolt thrown orretraced by key either side. Auxiliarylatch deadlocks latchbolt when door islocked. Specify per XL11-543.

L9040 x XL11-446LV9040

Privacy With Turns Both SidesLatchbolt retracted by knob/leverfrom either side unless outside islocked by inside or outsidethumbturn. Operating inside knob/lever, closing door or rotating eitherthumbturn unlocks outside knob/lever.Specify per XL11-446.

L9460 x XL11-635 L9460 With Fixed Dummy TrimKnob/lever both sides fixed. Deadboltthrown or retracted by key outside orthumbturn inside. Specify perXL11-635.

L9460, L9462, L9464 Deadbolt With Retraction ByInside Lever or KnobL9460: Deadbolt thrown or retractedby key outside or thumbturn inside.Outside knob/lever always fixed.Inside knob/lever active whendeadbolt is extended. Rotating insideknob/lever will retract deadbolt.L9462: Same as above, exceptdeadbolt thrown or retracted by keyfrom either side.L9464 (shown): Same as above,except deadbolt thrown or retracted bykey from one side. Specify desiredfunction per XL11-886.

L9485 x XL11-557 Prison Function LockLatch retracted by key outside or knobinside. Outside knob always freespinning. Deadbolt only thrown orretracted by guard’s key. Inside knobbecomes fixed when deadbolt isthrown. Auxiliary latch deadlocks latchbolt when door is locked. Prisoner’s key only retractslatchbolt. Furnished standard withtamper resistant Torx® screws. Specifyper XL11-557. Only available in knob trim.

* Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

L9412 x XL11-907 Exit Lock With DeadboltLatchbolt retracted by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is locked. Specify per XL11-907.

LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked.

Note: 1) For pricing on special functions, see “Special Options” page

L9066 x XL11-897 Storeroom Lock*Key in either cylinder locks or unlocks both levers. When locked, latchbolt retracted by key either side. Specify per XL11-897.

L • Functions

L-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Functions • L

For use only with Multipoint Lock Tornado or Security door/frame/lock solution. Please contact your local sales representative for more details

LM9000 Multipoint Lock

LM9010 Passage LatchLatchbolt retracted by knob/lever from either side at all times. Inside and out-side knob/lever Is always free for imme-diate egress. Auxiliary latch deadlocks latchbolt when door is closed.

LM9025 Exit LockLatchbolt retracted by knob/lever from inside at all times. No trim on outside. Auxiliary latch deadlocks latchbolt when door is closed.

LM9070LMV9070 Classroom Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. When outside is locked, latch-bolt is retracted by key and knob/lever outside or by knob/lever inside. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latch-bolt when door is closed.

LM9071LMV9071 Classroom Security Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When out-side is locked, latchbolt is retracted by key and knob/lever outside or by knob/lever inside. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed. Available with lock indicator on inside per XL11-986.

LM9080LMV9080 Storeroom Lock

Latchbolt retracted by outside knob/lever after key inserted and turned 280° or anytime by inside lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever is always free for immediate egress.

LM9056LMV9056 LM9050 with Automatic Unlocking

Latchbolt retracted by knob/lever from either side unless outside is made inopera-tive by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key and knob/lever outside or by knob/lever inside. Turning inside knob/lever simultaneously retracts latchbolt and unlocks outside knob/lever. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed.

LM9050LMV9050 Office and Inner Entry Lock

Latchbolt retracted by knob/lever from either side unless outside is made inopera-tive by key outside or by turning inside thumbturn. When outside is locked, latch-bolt is retracted by key and knob/lever outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Inside knob/lever is always free for imme-diate egress. Auxiliary latch deadlocks latchbolt when door is closed.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-10

L • Complete Locks A or B Rose Trim, Anti-Ligature

Cast or Forged Lever Designs with Wrought Roses01

Anti-Ligature KnobSK1 (Also specify XL11-000)

Wrought Knob Designs

41 42

Wrought Rose DesignsA

(2 1/8” Diameter)

B

02 03

05 06 07

12

OME

(Specify door hand)

17 18

For Additional Lever Designs, See Pages L-14 and L-16

(2 9/16” Diameter)

Anti-Ligature LeverSL1 (Also specify XL12-482)

Latitude (LAT)

Longitude(LON)

L-11Price Book 74Effective March 4, 2013 • Rev. 3/13

A or B Rose Trim Complete Locks • L

* Specify door hand for 12 lever design. ** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. L9486 also available with “Occupied” indicator option. Specify L583-375 and add $13.90.*** LAT and LON levers not available in 612 or 613 finish.

# Specify XL11-000 when ordering anti-ligature knob and XL12-482 when ordering anti-ligature lever. Includes levers, knobs, roses, thumbturn and cylinder ring as appropriate per function. Not available less components or cylinders; less core is available. Anti-ligature mixed trim available with SK1 anti-ligature knob and SL1 anti-ligature lever only; specify both XL11-000 and XL12-482 when ordering. Anti-ligature trim not available with messaging indicators.

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions

for more information. 4) Add $73.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs. 5) Add $736.00 for Multipoint Lock option. ( LM = Prefix ) 6) Add $809.00 for Multipoint Lock with Vandlgard option. ( LMV = Prefix ) 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

L-Series (A or B Rose Trim) and Anti-ligature Lever or Knob Designs and Finishes Standard Leadtime 03 06 07 03 06 07 12 17 Anti- Anti- 12 17 OME Ligature Ligature OME SK1# SL1#

6 Additional Leadtime: 01 02 05 18 41 42 LAT/LON*** 626 626 605 606 613 630 630 609 612 629 619 625 630Function Description 643e

Keyless Functions L9010 • Passage $390 $500 $512 $530 $1,298 $1,548 LM9025 Exit - Multipoint Lock Only 1,166 1,276 1,288 1,306 2,064 2,314 L9040 • Privacy 465 575 587 605 1,369 1,619 L9044 • Privacy w/ coin turn 514 624 636 654 - -L9440 • Privacy w/ deadbolt 551 661 673 691 1,452 1,702 L9444 • Privacy w/ deadbolt and coin turn 599 709 721 739 - -L0170 Single dummy 123 178 184 194 - -L0172 Double dummy 252 362 374 392 - -L9175 Single dummy with case 213 268 280 298 - -L9176 Double dummy with case 331 441 453 471 1,240 1,490 Keyed Single Cylinder Functions L9050P • • Office and inner entry $531 $641 $653 $671 $1,432 $1,682 L9056P • • Office w/ simult. Retraction 588 698 710 728 1,488 1,738 L9070P • • Classroom L9076P • Classroom holdback 531 641 653 671 1,432 1,682 L9080P • • Storeroom L9080PEL • Electrically locked 817 927 939 957 1,708 1,958 L9080PEU • Electrically unlocked L9453P • Entrance w/ deadbolt L9456P • Corridor w/ deadbolt 551 661 673 691 1,451 1,701 L9465P Closet/Storeroom w/ deadbolt L9473P Dorm/Bedroom w/ deadbolt L9480P • Storeroom w/ deadbolt 615 725 737 755 1,513 1,763 L9485P** • Faculty Restroom 588 698 710 728 1,488 1,738 L9486P** • Faculty Restroom w/ ‘Do Not Disturb’ indicator 643 753 765 783 - -L9496P • Privacy w/ deadbolt & Occupied Ind. Keyed Double Cylinder Functions L9060P • Apartment entrance L9071P • • Classroom security $594 $704 $716 $734 $1,493 $1,743 L9077P • Classroom security holdback L9082P • Institution L9082PEL Electrically locked 869 979 991 1,009 1,757 2,007 L9082PEU Electrically unlocked L9457P • Classroom security w/ deadbolt L9458P • Classroom security w/ deadbolt & aux latch 594 704 716 734 1,493 1,743 L9466P Storeroom w/ deadbolt

Add

$73

for V

andl

gard

Opt

ion

Add

$736

Mul

tipoi

nt L

ock

(5,6

)

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-12

L • Complete Locks L Escutcheon Trim

Cast or Forged Lever Designs with Forged Escutcheons01L 02L 03L

Wrought Knob Designs41L 42L

Concealed CylinderL

Full Face CylinderL

05L

06L 07L 12L 17L

18L LATOME LON

(Specify door hand)

L Escutcheon dimensions: 8” x 1-3/4” x 7/16” (203mm x 44mm x 11mm)For Additional Lever Designs, See Pages L-14 and L-16

L-13Price Book 74Effective March 4, 2013 • Rev. 3/13

L Escutcheon Trim Complete Locks • L

* Specify door hand for 12 lever design. ** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. L9486 also available with “Occupied” indicator option. Specify L583-375 and add $13.90.*** LAT and LON levers not available in 612 or 613 finish.

Notes: 1) Prices listed are for both full face and concealed cylinder escutcheon trim. 2) Split designs and/or finishes are priced at the highest design and/or finish price. 3) Keying options: see Keys & Keying. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions

for more information 5) Add $18.00 per cylinder for the concealed cylinder (C: Suffix). 6) Add $73.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs. 7) Add $736.00 for Multipoint Lock option. ( LM = Prefix ) 8) Add $809.00 for Multipoint Lock with Vandlgard option. ( LMV = Prefix ) 9) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

L-Series (L Escutcheon Trim)

Lever or Knob Designs and Finishes Standard Leadtime: 03 06 07 12 17 OME 6Additional Leadtime: 01 02 05 18 41 42 LAT*** LON*** 626 605 606 609 613 629 630 612 619 625Function Description 643eKeylessL9010 • Passage $532 $544 $562 LM9025 Exit - Multipoint Lock Only 1,308 1,320 1,338 L9040 • Privacy 607 619 637 L9440 • Privacy w/ deadbolt 693 705 723 L0172 Double dummy 394 406 424 L9175 Single dummy with case 300 312 330 L9176 Double dummy with case 473 485 503 Keyed Single Cylinder Functions L9050P • • Office and inner entry $673 685 $703 L9056P • • Office w/ simult. Retraction $730 742 $760 L9070P • • Classroom L9076P • Classroom holdback $673 685 $703 L9080P • • Storeroom L9080PEL • Electrically locked $959 971 $989 L9080PEU • Electrically unlocked L9453P • Entrance w/ deadbolt L9456P • Corridor w/ deadbolt $693 705 $723 L9465P Closet/Storeroom w/ deadbolt L9473P Dorm/Bedroom w/ deadbolt L9480P • Storeroom w/ deadbolt 757 769 787 L9485P** • Faculty Restroom 730 742 760 L9486P** • Faculty Restroom w/ ‘Do Not Disturb’ indicator 785 797 815 L9496P • Privacy w/ deadbolt & Occupied Ind. Keyed Double Cylinder Functions L9060P • Apartment entrance L9071P • • Classroom security $736 $748 $766 L9077P • Classroom security holdback L9082P • Institution L9082PEL Electrically locked 1,011 1,023 1,041 L9082PEU Electrically unlocked L9457P • Classroom security w/ deadbolt L9458P • Classroom security w/ deadbolt & aux latch 736 748 766 L9466P Storeroom w/ deadbolt

Add

$73

for V

andl

gard

Opt

ion

Add

$736

Mul

tipoi

nt L

ock

(7,8

)

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-14

L • Complete Locks N Escutcheon Trim

Cast or Forged Lever Designs with Wrought Escutcheons

Wrought Knob Designs41N 42N

01N 02N 03N 05N

06N 07N 12N

(Specify door hand)

17N

18N OME LAT LON

N Escutcheon dimensions: 8” x 2-9/16” x 7/16” (203mm x 65mm x 11mm)

For Additional Lever Designs, See Pages L-14 and L-16

L-15Price Book 74Effective March 4, 2013 • Rev. 3/13

N Escutcheon Trim Complete Locks • L

* Specify door hand for 12 lever design. ** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately.*** LAT and LON levers not available in 612 or 613 finish.

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information 4) Add $73.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs. 5) Add $736.00 for Multipoint Lock option. ( LM = Prefix ) 6) Add $809.00 for Multipoint Lock with Vandlgard option. ( LMV = Prefix ) 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

L-Series (N Escutcheon Trim)

Lever or knob Designs and Finishes Standard Leadtime: 03 06 07 12 17 OME 6Additional Leadtime: 01 02 05 18 41 42 LAT*** LON*** 626 605 606 609 613 629 630 612 619 625Function Description 643eKeylessL9010 • Passage $522 $534 $552 LM9025 Exit - Multipoint Lock Only 1,298 1,310 1,328 L9040 • Privacy 597 609 627 L9440 • Privacy w/ deadbolt 683 695 713 L0170 Single dummy 200 206 216 L0172 Double dummy 384 396 414 L9175 Single dummy with case 290 296 306 L9176 Double dummy with case 463 475 493 Keyed Single Cylinder Functions L9050P • • Office and inner entry $663 $775 $693 L9056P • • Office w/ simult. Retraction 720 732 750 L9070P • • Classroom L9076P • Classroom holdback 663 675 693 L9080P • • Storeroom L9080PEL • Electrically locked 949 961 979 L9080PEU • Electrically unlocked L9453P • Entrance w/ deadbolt L9456P • Corridor w/ deadbolt 683 695 713 L9465P Closet/Storeroom w/ deadbolt L9473P Dorm/Bedroom w/ deadbolt L9480P • Storeroom w/ deadbolt 747 759 777 L9485P** • Faculty Restroom 720 732 750 Keyed Double Cylinder Functions L9060P • Apartment entrance L9071P • • Classroom security $726 $738 $756 L9077P • Classroom security holdback L9082P • Institution L9082PEL Electrically locked 1,001 1,013 1,031 L9082PEU Electrically unlocked L9457P • Classroom security w/ deadbolt L9458P • Classroom security w/ deadbolt & aux latch 726 738 756 L9466P Storeroom w/ deadbolt

Add

$73

for V

andl

gard

Opt

ion

Add

$736

Mul

tipoi

nt L

ock

(5,6

)

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-16

L • Complete Locks Decorative Trim

Decorative Levers (For suites with F/FA Residential Decorative Levers, see page 18.)

Asti (AST/AVA)

Accent (ACC)

Merano (MER/MER)

Decorative RosesA B

(2 1/8” Diameter) (2 9/16” Diameter) (2 5/8” Diameter) (2 5/8” Diameter)

Avanti (AVA) Merano (MER)

St. Annes (STA)

Decorative Levers and L EscutcheonsAsti(AST/00L)

Accent (ACC/00L)

Merano(MER/00L)

St. Annes (STA/00L)

Unless otherwise specified, default rose is the Avanti Rose

Unless otherwise specified, default rose is the Merano Rose

L-17Price Book 74Effective March 4, 2013 • Rev. 3/13

Decorative Trim Complete Locks • L

* Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Split rose trim by escutcheon trim is not available. 3) Specify door hand for all lever designs. 4) Keying options: see Keys & Keying. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information 6) Add $18.00 per cylinder for the concealed cylinder (C: Suffix). 7) Add $73.00 for Vandlgard option. ( LV = Prefix ) 8) Add $736.00 for Multipoint Lock option. ( LM = Prefix ) 9) Add $809.00 for Multipoint Lock with Vandlgard option. ( LMV = Prefix ) 10) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Decorative Trim

Function

Add

$73

for

Vand

lgar

d O

ptio

n

Add

$736

M

ultip

oint

Loc

k (8

,9)

Description

Lever Designs and Finishes

AST MER ACC STA

Rose 00L Rose 00L

626 626 605 619 625

643e

605 619 625

643eKeyless

L9010 • Passage $590 $690 $602 $702LM9025 Exit - Multipoint Lock Only 1,366 1,466 1,378 1,478L9040 • • Privacy 665 765 677 777L9044 • Privacy w/ coin turn 714 – 726 –L9440 • Privacy w/ Deadbolt 751 851 763 863L9444 • Privacy w/ deadbolt and coin turn 799 – 811 –L0170 Single Dummy 323 423 335 435L0172 Double Dummy 452 552 464 564L9175 Single Dummy with Case 413 513 425 525L9176 Double Dummy with Case 531 631 543 643Keyed Single Cylinder Functions

L9050P • • Office and Inner Entry $731 $831 $743 $843 L9056P • • Office w/ Simult. Retraction 788 888 800 900L9070P • • Classroom

731 831 743 843L9076P • Classroom HoldbackL9080P • • StoreroomL9080PEL • Electrically Locked

1,017 1,117 1,029 1,129L9080PEU • Electrically UnlockedL9453P • Entrance w/ Deadbolt

751 851 763 863L9456P • Corridor w/ DeadboltL9465P Closet/Storeroom w/ DeadboltL9473P Dorm/Bedroom w/ DeadboltL9480P • Storeroom w/ Deadbolt 815 915 827 927L9485P* • Faculty Restroom 788 888 800 900L9486P • Faculty Restroom w/ 'Do Not Disturb' Indicator

843 943 855 955L9496P • Privacy w/ Deadbolt & Occupied IndicatorKeyed Double Cylinder Functions

L9060P • Apartment Entrance$794 $894 $806 $906L9071P • • Classroom Security

L9077P • Classroom Security HoldbackL9082P • Institution

1,069 1,169 1,081 1,181L9082PEL Electrically LockedL9082PEU Electrically UnlockedL9457P • Classroom Security w/ Deadbolt 815 915 827 927L9458P • Classroom Security w/ Deadbolt & Aux Latch 794 894 806 906L9466P Storeroom w/ Deadbolt 815 915 827 927

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-18

danmark Satin Stainless Steel LeversStyle 615Style 611 Style 621

Style 650

Style 640

Style 660 Style 690

Style 696

Style 695

danmark Stainless Steel Rose

(2 1/8” Diameter)

(Specify door hand)

L • Complete Locks danmark Stainless Steel Levers

All lever styles are available in Satin Stainless Steel finish (630) only.

L-19Price Book 74Effective March 4, 2013 • Rev. 3/13

danmark Stainless Steel Levers Complete Locks • L

Notes: 1) Split designs not available. 2) Escutcheon trim is not available. 3) Keying options: see Keys & Keying. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information 5) Add $73.00 for Vandlgard option. ( LV = Prefix ) 6) Tactile warning (Knurling) not available. 7) Trim only available with complete lock. 8) Must specify door hand for trim style 640. 9) Add $736.00 for Multipoint Lock option. ( LM = Prefix ) 10) Add $809.00 for Multipoint Lock with Vandlgard option. ( LMV = Prefix ) 11) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

* Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately.

danmark Satin Stainless Steel Levers

Function

Add

$73

for

Vand

lgar

d O

ptio

n

Add

$736

Mul

tipoi

nt L

ock

(9,1

0)Description

Lever Designs

6 Extended Factory Lead Time

611 621 660 690

615 640650 695 696

Finish

630 630Keyless

L9010 • Passage $692 $831 LM9025 Exit - Multipoint Lock Only 1,468 1,607L9040 • Privacy 767 906L9044 Privacy w/ coin turn 816 955L9440 • Privacy w/ Deadbolt 853 992L9444 Privacy w/ deadbolt and coin turn 901 1,040L0172 Double Dummy 554 693L9176 Double Dummy with Case 633 772Keyed Single Cylinder Functions

L9050P • • Office and Inner Entry $833 $972 L9056P • • Office w/ Simult. Retraction 890 1,029L9070P • • Classroom

833 972L9076P • Classroom HoldbackL9080P • • StoreroomL9080PEL • Electrically Locked 1,119 1,258L9080PEU • Electrically UnlockedL9453P • Entrance w/ Deadbolt

853 992L9456P • Corridor w/ DeadboltL9465P Closet/Storeroom w/ DeadboltL9473P Dorm/Bedroom w/ DeadboltL9480P • Storeroom w/ Deadbolt 917 1,056L9485P* • Faculty Restroom 890 1,029L9486P* • Faculty Restroom w/ 'Do Not Disturb' Indicator 945 1,084L9496P • Privacy w/ Deadbolt & Occupied IndicatorKeyed Double Cylinder Functions

L9060P • Apartment Entrance

$896 $1,035 L9071P • Classroom SecurityL9077P • Classroom Security HoldbackL9082P • InstitutionL9082PEL Electrically Locked 1,171 1,310L9082PEU Electrically UnlockedL9457P • Classroom Security w/ Deadbolt

896 1,035L9458P • Classroom Security w/ Deadbolt & Aux LatchL9466P Storeroom w/ Deadbolt

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-20

L • Complete Locks Commercial Lever Suites

Commercial Lever Suites

L-Lock ND AL S F/FA

Von Duprin 33/35A&98/99 Dxit Devices

01 01

02 02

03 Tubular 03

05 05

06 Rhodes Saturn Saturn Elan 06

07 Athens Jupiter Jupiter Jazz 07

12 Manhattan 12

17 Sparta Neptune Neptune 17

18 18

Latitude Latitude Latitude

Longitude Longitude

Omega Omega Omega 16

Asti Flair Flair Asti

Merano Merano Merano

Accent Accent Accent

St. Annes St. Annes St. Annes

L-21Price Book 74Effective March 4, 2013 • Rev. 3/13

L9000-Series Deadbolt Locks,L400-Series Deadbolt Locks Complete Locks • L

L9000-Series Deadbolt Locks Anti-ligature Trim** Finishes 605 606 609 626 612 619 625 613 629 630 630 Function Description 643eKeyedL9460P Single cylinder outside, turn inside $317 $323 $333 $715L9462P Double cylinder 385 391 401 577L9463P* Single cylinder outside, classroom turn inside 385 391 401 -L9464P Single cylinder outside, blank inside 262 268 278 361

* Specify door hand. ** Specify XL11-000, SK1. Not available in less cylinder or less components.

Notes: 1) Keying options: See Keys & Keying. 2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information

* Specify door hand. ** Specify XL11-000, SK1. Available in FSIC and SFIC, not available in less cylinder or less components.

Notes: 3) Keying options: See Keys & Keying. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

L400-Series Deadbolt Locks Anti-ligature Trim** Finishes 605 606 609 626 612 619 625 613 629 630 630 Function Description 643eKeyedL460P Single cylinder outside, turn inside $210 $216 $226 $666L462P Double cylinder 247 253 263 483L463P* Single cylinder outside, classroom turn inside 247 253 263 -L464P Single cylinder outside, blank inside 202 208 218 331L496P L460 with “Occupied” indicator 303 309 319 -KeylessL480 Door bolt $175 $181 $191 $579

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-22

L • Options Armor Fronts and Strikes, L9000-Series

Armor Fronts, L9000-Series 1 1/4” Wide Square 1 1/16” Wide Add to Description Corner, Standard Square Corner Lock PriceL9175, L9176 Blank 09-661 09-667L9010, L9040, L9044 Latch 09-662 09-668L9050, L9056, L9060, L9070, L9071, L9080, L9082, 09-663 09-669Latch x auxiliary latchL9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496, 09-664 09-670 N/CLatch x deadboltL9460, L9462, L9463, L9464, Deadbolt 09-665 09-671L9453, L9458, L9480, L9485, L9486,

Latch x auxiliary latch x deadbolt 09-666 09-672

L9076, L9077, Latch x auxiliary latch (non-UL) 09-713 —

Note: 1) 1 1/16” Wide armor fronts are recommended for use on 1 3/8” thick doors.

10-072Standard

10-073Deadbolt Standard

XL11-820 XL11-821

Strikes, L9000-Series Add to Description Lip Length Specify Lock Price1 1/4” x 4 7/8” Square corner, box, standard 1 3/16” 10-072 N/C

1 1/4” x 4 7/8” Square corner, box 7/8”, 1”, 1 1/2” 10-072 N/C 1 3/4”, 2” $22.60Deadbolt lock strike, L9460, L9462, L9463, L9464, standard — 10-073 N/C1/2” Rabbeted — 10-075* 78.40Strike frame reinforcer — 37-015 N/COne hole for latching functions, RH & LHR doors 1 3/16” XL11-820 6 9.70One hole for latching functions, LH & RHR doors 1 3/16” XL11-821 6 9.70

* For 1 3/4” thick doors, use with 1 1/16” wide armor fronts. For over 1 3/4” – 2 1/4” thick doors extended equally (EE), use with 1 1/4” wide armor fronts.

Shaded items are standard components and arefurnished with locks unless otherwise specified.

6 Extended Factory Lead Time

L-23Price Book 74Effective March 4, 2013 • Rev. 3/13

L400-Series Strikes, ADA Thumbturn Options • L

Shaded items are standard components and arefurnished with locks unless otherwise specified.

10-079Standard

L583-363ADA Thumbturn

(Rose trim shown)

10-078

Strikes, L400-Series Add to Description Specify Lock Price1 1/4” x 4 7/8” Square corner, box 10-0781 1/8” x 3 1/2” Square corner, box, standard 10-079 N/C ANSI A115.5 preparation

ADA Thumbturn Description Specify Add to Lock PriceDisability turn (ADA) option Lock function and L583-363 (Previously XL11-800) $12.20

Notes: 1) Available with all thumbturn functions except L9463 and L463. For L463 and L9463 see special parts. 2) ADA thumbturn must be ordered with 09-509, 09-633 or 09-634 as a complete unit. (See L-33 and L-36) 3) Not available with anti-ligature knob (SK1, XL11-000 option) or anti-ligature lever (SL1, XL12-482 option).

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-24

L • Options Full Size Interchangeable Core, Small FormatInterchangeable Core, Lead Lining

Full SizeInterchangeable Core

Small FormatInterchangeable Core

Full Size Interchangeable CoreFull Size Construction Core Add to Lock Price Description Specify (per core)Full size core* R suffix Example: L9050R $53.00

Full size construction core** T suffix Example: L9050T 53.00

Less full size core J suffix Example: L9453J N/C

Small Format Interchangeable CoreSmall Format Construction Core Add to Lock Price Description Specify (per core)Everest patented core* GD Suffix $59.00 Example: L9050GDSmall format construction core** HD Suffix 32.00 Example: L9050HDLess small format core BD Suffix N/C Example: L9050BDSmall format disposable core BDC Suffix N/C Example: L9050BDC

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Not available with concealed cylinders.

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Use same price for F suffix. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Notes: 3) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 4) Small format interchangeable cores are not available for Hotel functions (L9485, L9486). 5) Not available with concealed cylinders. 6) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Notes: 7) Buyer should verify that this preparation meets local installation requirements or regulations.

* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

(Everest® patented core shown)

Lead Lining Description Specify Add to Lock Price1/8” Thick lead plate installed on case cover, L9000 Lock function, door hand and XL11-515 6

$257.001/8” Thick lead plate installed on case cover, L400 Lock function, door hand and XL12-216 6

6 Extended Factory Lead Time

L-25Price Book 74Effective March 4, 2013 • Rev. 3/13

Locks Less Components, Locks Less Lock Case Options • L

Locks Less Components Deduct from Description Specify Lock PriceLess each knob or lever LLL for knob/lever design $20.00 Example: L9050P LLL/03A x 03ALess each rose or escutcheon LLL for rose/escutcheon design 20.00 Example: L9050P 03A x 03A/LLLLess complete trim one side* LLL for complete trim outside 40.00 Example: L9050P LLL x 03ALess full face cylinder (rose trim) L suffix 60.00 Example: L9050L 03A per cylinderLess full face cylinder L suffix 53.00 Example: L9050L 03L per cylinderLess concealed cylinder W suffix 53.00(L escutcheon only) Example: L9050W 03L per cylinderLess hotel cylinder (rose trim) L suffix, Faculty Restroom Function (L9485 or L9486) 90.00 Example: L9485L 03ALess hotel cylinder L suffix, Faculty Restroom Function (L9485 or L9486) 84.00(escutcheon trim) Example: L9485L 03LLess armor front LLL for armor front 12.20 Example: L9050P 03A 626 LLL 10-072Less strike LLL for strike 9.50 Example: L9050P 03A 612 09-663 LLLLess complete trim both sides LLL for complete trim both sides Sum of applicable Example: L9050L LLL 626 LLL 626 09-663 LLL deducts, use 06A Lock case and armor front only design and specified finish for base price.

Note: 1) L-Series locks ordered less all components are furnished as lock cases. See L Parts: Lock Cases. 2) Not available with anti-ligature knob (SK1, XL11-000 option) or anti-ligature lever (SL1, XL12-482 option).

Notes: 3) Locks less lock case are furnished less cylinder(s), armor front, and strike. Included are complete sets of outside and inside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified. 4) Deductions are applied to complete lock prices. 5) Not available with SK1, XL11-000 anti-ligature knob trim or SL1, XL12-482 anti-ligature lever trim.

* L283-150 furnished to mount inside trim when lock is ordered less outside trim for rose designs only. Add $29.30 per lock.

Locks Less Lock Case (Trim Kits) Deduct from Function Specify Lock PriceL9010 $131.00 Function, design, finish, LLL for armor, LLL for strike and “less lock L9040, L9044, L9440, L9444 case” 163.00 Example: L9010 O3A 626 LLL LLL, less lock case L9050, L9056, L9070, L9076, 220.00L9080 L9453, L9456, L9465, L9473, Function less cylinder (use L suffix), design, finish, LLL for armor, 238.00 L9480, L9485, L9486, LLL for strike, and “less lock case” L9486 “Occupied”, L9496 Example: L9050L O6L 613 LLL LLL, less lock case L9060, L9071, L9077, L9082, 274.00L9457, L9466

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-26

L • Options Non-Standard Door Thickness, Primus®, Request To Exit

Non-Standard Door Thickness Function Single Double Keyless Cylinder Cylinder Description Specify Add to Lock Price1 3/8” Thick doors (not available with LV) 1 3/8” door* N/C N/C N/C Extended Inside (EI)Over 1 3/4” – 2 1/2” Extended Outside (EO)thick doors** Extended Equally (EE) N/C N/C N/C Extended Differently (ED) Door thickness and howOver 2 1/2” – 4” thick Extended Inside (EI) door is extended $74.30 $74.30 $363.00doors Extended Outside (EO) Example: 2 7/8”, EO 74.30 363.00 363.00 Extended Equally (EE) 74.30 363.00 649.00 Extended Differently (ED) 74.30 363.00 649.00

Notes: 1) Price keyed locks furnished less cylinder(s) (L or W suffix) same as keyless. 2) Locks are furnished extended equally (EE) unless otherwise specified. 3) Locks with N Escutcheons are available only for 1 3/4” – 2 3/8” thick doors. 4) L400-Series locks are available only for 1 3/4” – 3” thick doors extended equally (EE) at no additional charge. 5) Locks with small format interchangeable core, suffixes BD, BDC, GD and HD are available only for 1 3/8” – 2 1/4” thick doors extended equally (EE). 6) L583-363 ADA thumbturn is only available for extended equally (EE) doors up to 2 1/8” thick for escutcheon trim and 2 3/8” thick for rose trim. 7) L9463 Function is only available for doors up to 3 5/8” thick extended equally (EE). 8) LV option only available for 1 3/4” – 3” thick doors. 9) Anti-ligature knob (SK1) and anti-ligature lever (SL1) only available on 1 3/4” thick doors.

Note: 10) Primus is not available for Faculty Restroom function (L9485, L9486).

Note: 11) Prices include RX.

* 1 1/16” Wide armor fronts are recommended for use on 1 3/8” thick doors. See page L-16 to specify. ** Cylinder may have to be ordered separately and additional charges may apply. See page CYL-46.

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyL-Series lock and full face Primus cylinder(s) Lock less full face cylinder (use L suffix). Order Primus cylinder(s) separately. See Cylinders. Example: 1 ea. L9080L 03A 1 ea. 20-787L-Series lock and concealed Primus cylinder(s) Lock less concealed cylinder (use W suffix). Order Primus cylinder(s) separately. See Cylinders. Example: 1 ea. L9453W 1 ea. 20-589L-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus core(s)cylinder(s) separately. See Cylinders Example: 1 ea. L9466J 2 ea. 20-740

Request to Exit (RX) Feature and Latch Monitoring Add to Functions Available Specify Lock Price

L283-263

(for these thicknesses, must contact technical support for assistance)

Locks available with Request to Exit (RX) feature. Functions L9010, L9050, L9070, L9071, L9076, L9077, L9080, L9080EL, L9080EU, L9082EL, L9082EU, L9056, L9060, L9496, L9453, L9456, L9457, L9485

L283-239

XL12-245 for L9080PEL XL12-246 for L9080PEU.

Locks available with Request to Exit (RX) feature. Functions LV9050, LV9070, LV9071, LV9076, LV9077, LV9080, LV9080EL, LV9080EU, LV9056, LV9060, LV9071, LV9453, LV9456, LV9457, LV9485

Latch monitoring with RX (Request to exit) Must order in addition to RX feature. Only available with L9080EL/EU

$231.00

231.00

431.00

L-27Price Book 74Effective March 4, 2013 • Rev. 3/13

Vandlgard Option, Tactile Warning, Tamper Resistant Torx® Screws,Folger Adam Co® Lever Trak™ Options • L

Notes: 2) Tactile warning is applied to outside lever only unless otherwise specified.

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceArmor and strike screws for rose trim without Torx screws $15.30thumbturnArmor, strike, and thumbturn screws for rose trim Torx screws 16.00with thumbturn*Armor, strike, and mounting screws for L Torx screws 16.00Escutcheon trim (1 3/4” thick doors only)Armor, strike, and mounting screws for N Torx screws and XL11-848 6 16.00Escutcheon trim (1 3/4” thick doors only)

* For L9044 and L9444 specify Torx screws and L283-056. Add $6.10.

6 Extended Factory Lead Time

Folger Adam Co® Lever Trak™

Description Specify Add to Lock PriceModified inside and outside 03 Lever for Folger Adam Co.® Lever Trak™ 503 design(Available with rose trim only. Example: L9080P 503/03A $75.80

Not available in 629 & 630 finishes) (Previously XL11-832)

Tactile Warning

(06 lever shown)

Tactile Warning or Knurling Add to Lock Price Description Specify (per lever)Tactile Warning Preface lever design code with 8. $34.70 803 for 03, 806 for 06, etc. Available on 01, 03, 05, 06, 07, 12 and 17 lever designs.

Anti-Ligature Trim Description Specify RestrictionsAnti-Ligature Trim is intended for patient or For knob, SK1 for Only available for 1-3/4” door thicknessdetention applications. trim and XL11-000 Not available lock less components, as option standard ADA thumbturn (L583-363), tactile or knurling, lock less cylinder For levers, SL1 for trim and XL12-482 as option

For mixed anti-ligature trim, specify both SK1 and SL1 along with XL11-000 and XL12-482 as options.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-28

L • Options Special Options, Non-Standard Finishes

Special Options6 Extended Factory Lead Time Not subject to standard discount terms Specify Description Lock Function “X” Number Add to Lock PriceSolid latchbolt (nylon insert), for use with electric strikes As required XL11-422 $54.40L9040 with thumbturn both sides (not available with L9040 XL11-446 55.50N Escutcheon trim).L9482* (L9082 with deadbolt). L9482 XL11-543 92.70 Added to L9082L9485 prison function lock. Latch retracted by key outside or L9485 XL11-557 149.00knob inside. Outside knob always free-spinning. Deadbolt only Added to L9485thrown or retracted by guard’s key. Inside knob becomes fixedwhen deadbolt is thrown. Prisoner’s key only retracts latchbolt.Furnished standard with Torx® screws.L9460 with fixed double dummy trim. L9460 XL11-635 Same price as L9456L9463 or L463 with B100-Series style thumbturn. L9463/L463 XB11-720 30.50L9110 active double dummy trim. L9110 XL11-741 Same price as L9010Armor front with cutout to receive deadbolt only, for use with L9110, L9175, XL11-743 67.00dummy functions. L9176L9460 with trim. Inside knob or lever retracts deadbolt. L9460 XL11-886 Same price as L9456Outside knob or lever fixed.L9462 with trim. Inside knob or lever retracts deadbolt. L9462 XL11-886 Same price as L9082Outside knob or lever fixed.L9464 with trim. Inside knob or lever retracts deadbolt. L9464 XL11-886 Same price as L9456Outside knob or lever fixed.L9412 Exit lock with deadbolt for escutcheon designs only. L9412 XL11-907 Same price as L9080L9066 Storeroom Lock, latchbolt retracted by key either side L9066 XL11-897 14.80 added to L9060

* Add $73.00 for Vandlgard option. ( LV = Prefix ).

Antimicrobial Coating Finishes: 626AM or 630AM Description of Components Coated Add to Lock Price Rose Trim Inside: Lever, Bushing, Rose, and Thumbturn A or B Outside: Lever, Bushing, Rose, Compre ssion Ring $36.90Escutcheon Trim Inside: Lever, Bushing, Escutcheon, Thumbturn L or N Outside: Lever, Bushing, Escutcheon, Face plate

Ordering notes for Antimicrobial Coatings: 1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days for manufacturing. 2) Please specify 626AM or 630AM on each line item requiring antimicrobial coating. 3) For ease of identification, a sticker will be applied to a non-visible location on product. 4) For additional product finishes or styles, please use the Schlage Innovation Center Process in the forms and example section.

L-29Price Book 74Effective March 4, 2013 • Rev. 3/13

Distributor Pack Program • L

FeaturesThe Schlage Distributor Pack stocking program provides“flexible inventory” for the L-Series mortise lock. TheDistributor Pack combines the versatile Schlage mortiselock with a variety of knob or lever options and finishes allfor the same list price as a complete lockset. This allowsyou to maximize your mortise lock inventory dollars andmeet your changing customer requirements.The Distributor Pack is also easy to use. By combining afew different component parts, you can build a completeSchlage mortise lock.

How to Build a Mortise Lock withthe Schlage Distributor PackSTEP 1: Choose lock case required. Schlage mortise cases must be ordered in multiples of 10 units each. (Quantity of 1 = 1 lock case.)STEP 2: Choose the knob/lever and rose/escutcheon trim designs and finishes. Order one design and finish in multiples of 10 units each. (Quantity of 1 = 1 set of outside and inside trim.)STEP 3: Choose the armor fronts and strikes required. Now that you have decided on the lock case function, trim designs, and finishes required, both armor fronts and strikes can be easily added. (Quantity of 1 = 10 armor fronts or strikes. Packed 10 to a box.)STEP 4: Choose cylinder option. If the lock functions ordered require cylinders, you must add the appropriate quantity of cylinders to your order. (Quantity of 1 = 10 cylinders. Packed 10 to a box.)These are the only component parts required to build aSchlage mortise lock. With four easy steps you can buildyour mortise inventory to be flexible and to respond quicklyto your customers.Miscellaneous parts in bulk quantities are also available forSchlage mortise locks with the Distributor Pack Program.(See page L-31 for availability.)

Product IdentificationFunctions AvailableFunction DescriptionL9010B PassageL9040B PrivacyL9050LB OfficeL9070LB ClassroomL9080LB StoreroomL9453LB EntranceL9456LB CorridorL9465LB Closet/StoreroomL9473LB Dormitory/Bedroom

Suffix B = Distributor Pack Lock Case L = Less Full Face Cylinder

Designs and Finishes Available Rose or Knob/Lever Escutcheon Designs Designs Finishes 03, 06, 07, 12, 17, A, B, or L 605, 606, 612, 41, 42, 18, 613, 625, 626, OME 629, 630

Pricing and DiscountingDistributor Pack Program lock cases, trim sets, armorfronts, strikes, cylinders, and miscellaneous parts willreceive the same discount as applied to L-Series locks.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-30

L • Distributor Pack Program Lock Cases

STEP 1: Choose lock case.

Notes: 1) Distributor Pack lock cases must be ordered with B suffix. 2) Order lock cases less cylinder, design, finish, latch, and strike. 3) Lock cases must be ordered in multiples of 10 per each lock function. (Quantity of 1 = 1 lock case.) 4) Lock cases are furnished with mounting screws and templates only. 5) Lock cases are furnished right hand only. 6) Lock trim, armors, strikes and cylinders must be ordered separately. 7) Add $73.00 for Vandlgard option. ( LV = Prefix )

Lock CasesOrder in multiples of 10

FunctionVandlgard Option

Available Description Price Each

L9010B Passage $127.00

L9040B • Privacy 186.00

L9050LB • Office

206.00L9070LB • Classroom

L9080LB • Storeroom

L9082LB • Institution

232.00

L9453LB • Entrance

L9456LB • Corridor

L9465LB Closet/Storeroom

L9473LB Dormitory/Bedroom

L9480LB • Storeroom with Deadbolt

L9485LB • Faculty Restroom

L-31Price Book 74Effective March 4, 2013 • Rev. 3/13

Distributor Pack Program • LOutside and Inside Trim Sets

STEP 2: Choose knob/lever and rose/escutcheon trim designs and finishes.

Distributor Pack Program L-Series (A or B Rose Trim Sets) Lever or Knob Styles Standard Leadtime: 03 06 07 03 06 07 12 17 12 17 OME OME 6Additional Leadtime: Please order in multiples of 10 18 41 42 Prices shown are per lock body Finishes 626 626 605 606 613 Distributor 609 612 629 Pack 619 625 630 Function Number Part Number 643e L9010, L9070, L9080, L9465 09-454 $254 $351 $363 $381 L9040 09-455 262 359 371 389L9050, L9453, L9456, L9473 09-456 255 352 364 382

Notes: 1) Trim sets must be ordered in multiples of 10 units per design and finish. (Quantity of 1 = 1 set of outside and inside trim.) 2) Split designs and/or finishes are not available. 3) Outside and inside trim sets include mounting screws, mounting plate, spring cages, and strike box. Order mounting posts (page L-31) as appropriate for either L or LV function. 4) Components are for 1 3/4” thick doors only.

* Specify door hand for 12 lever

Notes: 5) Trim sets must be ordered in multiples of 10 units per design and finish. (Quantity of 1 = 1 set of outside and inside trim.) 6) Split designs and/or finishes are not available. 7) Outside and inside trim sets include mounting screws, mounting plate, spring cages, and strike box. Order mounting posts (page L-31) as appropriate for either L or LV function. 8) Components are for 1 3/4” thick doors only. 9) Concealed cylinder escutcheons are not available in the Distributor Pack Program.

* Specify door hand for 12 lever

Distributor Pack Program L-Series (L Escutcheon Trim Sets) Lever or Knob Design and FinishesPlease order in multiples of 10 Standard Leadtime: 03 06 07 12 17 OMEPrices shown are per lock body 6Additional Leadtime: 18 41 42 Distributor 626 605 606 609 Pack 612 619 625 613 629 Function Number Part Number 643e 630 L9010 09-446 $385 $397 $415L9040 09-447 394 406 424L9070, L9080, L9465 09-449 380 392 410L9050, L9453, L9456, L9473 09-451

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-32

Armor Fronts, Strikes, Cylinders,Cylinder Length RequirementsL • Distributor Pack Program

STEP 3: Choose armor fronts and strikes.

Armor Fronts — 1 1/4” Wide Square Corner Distributor Pack Part Price Description Number (box of 10) (per box)10 each 09-662 for L9010, L9040, latch 09-47310 each 09-663 for L9050, L9070, L9080, latch x auxiliary latch 09-474 $236.00 10 each 09-664 for L9456, L9465, L9473, latch x deadbolt 09-47510 each 09-666 for L9453, latch x auxiliary latch x deadbolt 09-477

Notes: 1) Specify finish. 2) Mounting screws are included with armor fronts.

Notes: 3) Specify finish and lip length. 1 3/16” lip strike will be furnished unless otherwise specified. 4) Strike box included with Distributor Pack trim sets.

Notes: 5) Specify finish, key section and cylinder length. 1 1/8” long cylinders in C keyway will be furnished unless otherwise specified. 6) Cylinders are 5-pin furnished with two 5-pin 0-bitted keys.

Strikes Distributor Pack Part Price Description Lip Length Number (box of 10) (per box) 1” 10 each 10-072, 1 1/4” X 4 7/8”, Square corner, no box 1 3/16” 09-494 $143.00 1 1/2”

STEP 4: Choose cylinders.

Cylinders Cylinder Distributor Pack Part Price Description Length Number (box of 10) (per box) 1 1/8” 20-001 1 1/4” 09-48410 each Standard full face mortise 1 3/8” $600.00cylinders with compression rings 1 1/8” 30-001 1 1/4” 09-485 1 3/8”

L-Series Cylinder Length Requirements Cylinder Length Door Thickness Rose Trim Escutcheon Trim 1 3/8” 1 1/8” 1 1/8” 1 3/4” 1 1/8” 1 1/4” 2” 1 1/8” 1 3/8”

L-33Price Book 74Effective March 4, 2013 • Rev. 3/13

Escutcheon Thru-Bolts, Mounting Posts,Mounting Screws Distributor Pack Program • L

These miscellaneous parts in bulk quantities may be ordered under the Distributor Pack Program. Part numbersrepresent bulk quantities as shown below.

Escutcheon Thru-Bolts Distributor Pack Part Number Price Description (box of 50) (per box)50 each L Escutcheon thru-bolts 09-483 $195.00

Mounting Posts Distributor Pack Part Number Price Description (box of 50) (per box)50 each Mounting posts for L 09-488 $391.0050 each Mounting posts for LV Contact Technical Support

Notes: 1) Specify finish. 2) Specify door thickness: 1 3/8”, 1 3/4”, 2”, 2 1/4”, or 2 1/2”. 3) Escutcheon thru-bolts are packed 50 units to a box. (Quantity of 1 = box of 50 thru-bolts.)

Notes: 4) Specify door thickness: 1 3/8”, 1 3/4”, 2”, 2 1/4”, or 2 1/2”. 5) Mounting posts are packed 50 units to a box. (Quantity of 1 = box of 50 mounting posts.) 6) LV mounting posts are required for all Vandlgard® applications. See page L-39.

Mounting Screws Distributor Pack Part Number Price Description (box of 100) (per box)100 each Mounting screws (L583-066) 09-493 $30.00

Note: 7) Mounting screws are packed 100 units to a box. (Quantity of 1 = box of 100 mounting screws.)

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-34

L • Parts Lock Trim: Levers, Knobs, Roses

Levers Designs and Finishes 016 026 056 03** 06 07 AST* ACC 18 12* 17 OME †6 LAT6 LON6 MER* STA 605 606 605 609 612 613 619 Part 619 625 629 625 Number Description 626 643e 630 62609-401 Outside lever $125.00 $137.00 $141.00 $158.0009-402 Inside lever & bushing

Note: 1) Specify part number, complete design application, and finish. Example: 09-401 03A 626, outside 03 lever for use with an A Rose.

Note: 2) Specify part number, complete design application, and finish. Example: 09-402 42L 605, inside 42 knob for use with an L Escutcheon.

Note: 3) Specify part number, complete design application, and finish. Example: 09-403 03B 625, inside B rose for use with an 03 lever.

* When ordering levers as parts, specify hand of lever. ** Available modified for Folger Adam Co.® Lever Trak™. Specify 503 design and add $37.90. Not available in 629 and 630 finishes.

Knobs Designs and Finishes 416 426 605 613 Part 606 609 612 629 Number Description 626 619 625 643e 63009-401 Outside knob $88.00 $100.00 104.00 09-402 Inside knob & bushing

Roses Designs and Finishes A B MER AVA 605 605 606 606 609 609 612 612 605 619 613 619 613 619 Part 625 629 625 629 625 Number Description 626 643e 630 626 643e 630 626 643e09-403 Inside rose $68.10 $70.10 $72.10 $75.80 $77.80 $79.80 $99.00 $101.0009-404 Outside rose & bushing 73.80 75.80 77.80 83.90 85.90 87.90 103.00 105.0009-508 Blank outside rose 91.60 93.60 95.60 93.50 95.50 97.50 – –

6 Extended Factory Lead Time

6 Extended Factory Lead Time

L-35Price Book 74Effective March 4, 2013 • Rev. 3/13

Lock Trim: Outside and Inside L and N Escutcheons Parts • L

L Escutcheons Finishes 605 606 613 Part 609 612 619 629 Number Description 626 625 643e 630Outside Escutcheon & Bushing09-636 Blank x knob or lever09-637 Emergency turn x knob or lever $139.00 $145.00 $155.0009-638 Concealed cylinder x knob or lever09-639 Full face cylinder x knob or lever09-640** Concealed cylinder x occupancy indicator x knob or lever 156.00 162.00 172.00 09-641** Full face cylinder x occupancy indicator x knob or leverInside Escutcheon09-632 Blank x knob or lever09-633* Thumbturn x knob or lever 09-634* Thumbturn x blank $140.00 $146.00 $156.0009-635 Full face cylinder x knob or leverL583-187 Concealed cylinder x knob or lever

N Escutcheons Finishes 605 606 613 Part 609 612 619 629 Number Description 626 625 643e 630Outside Escutcheon & Bushing09-636 Blank x knob or lever09-637 Emergency turn x knob or lever $106.00 $112.00 $122.0009-639 Full face cylinder x knob or leverInside Escutcheon09-632 Blank x knob or lever09-633* Thumbturn x knob or lever $102.00 $108.00 $118.0009-635 Full face cylinder x knob or lever

Notes: 1) Specify part number, complete design application and finish. Design not required for L583-187. Examples: 09-636 03L 626, outside L Escutcheon for use with an 03 lever. 09-633 AST/00L, inside L Escutcheon for use with AST lever. 2) For special escutcheons, see Special Parts. 3) Thru-bolts are furnished with inside escutcheons, except L583-187.

* Specify door thickness: 1 3/8” or 1 3/4”. Available with disability turn (ADA) option. Specify L583-363 and add $12.20. ** Available with “Occupied” indicator option. Specify with L583-375 and add $13.90.

Notes: 4) Specify part number, complete design application and finish. Example: 09-636 42N 626, N Escutcheon for use with a 42 knob. 5) For blank N Escutcheons, see Special Parts. 6) Thru-bolts are furnished with inside escutcheons.

* Specify door thickness: 1 3/8” or 1 3/4”. Available with disability turn (ADA) option. Specify L583-363 and add $12.20.

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-36

L • Parts Outside Knob/Lever and Rose/EscutcheonAssemblies, Armor Fronts

Outside Knob/Lever and Rose/Escutcheon Assemblies Designs and Finishes 016 026 03 056 06 07 AST* MER* 12* 17 18 OME† LAT6 LON6 416 426 ACC STA 605 606 605 606 609 612 613 609 612 613 605 Part 619 625 629 619 625 629 619 625 Number Description 626 643e 630 626 643e 630 626 643eWith A Rose09-506 — $140.00 $152.00 $156.00 $140.00 $152.00 $156.00 — —09-655 — — — — — — — $166.00 $178.00With B Rose09-506 — $140.00 $152.00 $156.00 $140.00 $152.00 $156.00 — —09-655 — — — — — — — $166.00 $178.00With L Escutcheon09-550 Blank 09-551 Emergency turn 09-552 Concealed cyl. $187.00 $199.00 $203.00 $187.00 $199.00 $203.00 $201.00 $213.0009-553 Full face cyl. 09-554** Concealed cyl. w/indicator 09-555** Full face cyl. w/indicator With N Escutcheon09-550 Blank 09-551 Emergency turn $166.00 $178.00 $182.00 $166.00 $178.00 $182.00 — 09-553 Full face cyl.

Notes: 1) Specify part number, complete design application and finish.

Note: 3) 1 1/16” Wide armor fronts are recommended for use on 1 3/8” thick doors.

* Specify hand of lever. ** Available with “Occupied” indicator. Specify with L583-375 and add $13.90.

Armor Fronts, L9000-Series 1 1/4” Wide, Specify Price standard 1 1/16” Wide Finish Description Each 09-661 09-667 • L9175, L9176, Blank 09-662 09-668 • L9010, L9040, L9044, Latch 09-663 09-669 • L9050, L9056, L9060, L9070, L9071, L9080, L9082, Latch x auxiliary latch 09-664 09-670 • L9444, L9456, L9457, L9465, L9466, L9473, L9496, Latch x deadbolt $26.90 09-665 09-671 • L9460, L9462, L9463, L9464, Deadbolt 09-666 09-672 • L9453, L9458, L9480, L9485, L9486, Latch x auxiliary latch x deadbolt 09-713 — • L9076, L9077, Latch x auxiliary latch (non-UL)

Armor Front, L400-Series 1 1/4” Wide, Specify Price standard Finish Description Each 09-717 • L460, L462, L463, L464, L480, L496 Deadbolt $26.90

6 Extended Factory Lead Time

L-37Price Book 74Effective March 4, 2013 • Rev. 3/13

Strikes Parts • L

10-072 10-073 10-091

Strikes, L9000-Series Part Specify Lip Price Number Finish Description Length Each10-072* • 1 1/4” x 4 7/8” Square corner, box, standard 1 3/16” $16.30

10-072* • 1 1/4” x 4 7/8” Square corner, box 7/8”, 1”, 1 1/2” 16.30 1 3/4”, 2” 41.7010-073 • Deadbolt lock strike, L9460, L9462, L9463, L9464, standard — 19.9010-075** • 1/2” Rabbeted — 108.0010-091*** • 1 1/4” x 8” Square corner, armor strike, no box 1 3/16” 72.80K510-066 Strike box — 5.4037-015 Door frame strike reinforcer — 18.10

Note: 1) For special strikes, see Special Parts.

* Specify lip length. ** For 1 3/4” thick doors, use with 1 1/16” wide armor fronts. For over 1 3/4” – 2 1/4” thick doors extended equally (EE), use with 1 1/4” wide armor fronts. *** Specify hand of inactive door.

10-078 10-079

Strikes, L400-Series Part Specify Price Number Finish Description Each10-078 • 1 1/4” x 4 7/8” Square corner, box

10-079 • 1 1/8” x 3 1/2” Square corner, box, standard $16.30 ANSI A115.5 preparationK510-053 Strike box for 10-079 strike 5.50 K510-066 Strike box for 10-078 strike

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-38

L • Parts Buttons, Thumbturns & Coin Turns, Cylinder Turns,Occupancy Indicators

K510-330 09-509 09-509 L283-124

Buttons, Thumbturns & Coin Turns Part Specify Price Number Finish Description EachK510-330 • Emergency button, L9040 and L9440 $11.10 L583-233 458 Emergency turn, L9040 and L9440 13.90 09-509* • Thumbturn for rose trim 51.50 L283-124** • Coin turn, L9044 and L9444 89.30L283-056** • Coin turn with Torx screws, L9044 and L9444 96.80

* Specify dimension for 09-509 thumbturn. See chart below for dimensions. Available with disability turn (ADA) option for 1 3/8” – 1 7/8” thick doors. Specify L583-363 and add $12.20. ** Specify dimensios for L283-124 and L283-056.

09-900 Dimension Chart: 09-509 Thumbturn Part Number Door Range Dim 1 3/8” – 1 7/8” 027 09-509 over 1 7/8” – 2 3/8” 033 over 2 3/8” – 2 7/8” 040 over 2 7/8” – 3 5/8” 047

Cylinder Turns Part Specify Price Number Finish Description Dimension Each09-900 • Classroom turn 1 1/8”, 1 1/4”, 1 3/8” $86.90 1 1/2”, 1 5/8”, 1 3/4” 133.0009-904 • Classroom turn with compression ring 1 1/8”, 1 1/4”, 1 3/8” 94.30 1 1/2”, 1 5/8”, 1 3/4” 140.0009-905 • Classroom turn with compression ring and 1/8” blocking 1 1/8” 104.00 ring, 1 3/4” doors09-907 • Classroom turn with compression ring and 1/4” blocking 1 1/8” 104.00 ring, 1 3/8” doors

Notes: 1) Specify dimension for cylinder turns, and door hand if for use with L463 or L9463. If handing is not required, specify NH (non-handed). 2) For special cylinder turn, see Special Parts. 3) Not available in 629 and 630 finish.

Note: 4) Available with “Occupied” indicator option. Specify with L583-375 and add $13.90. 5) Available with “LOCKED” indicator option. Specify with XL11-986 and add $13.90.

Occupancy Indicators Part Specify Price Number Finish Description Each09-611 • Occupancy indicator for rose trim reading “DO NOT DISTURB”, $82.80 includes the L583-245 driver barL583-245 Occupancy indicator driver bar sold separate 4.10

with ADA thumbturn (L583-363)

L-39Price Book 74Effective March 4, 2013 • Rev. 3/13

Escutcheon Thru-Bolts, Mounting Posts,Spindles & Springs, Electrified Lock Kits Parts • L

Escutcheon Thru-Bolts Part Specify Door Price Number Finish Description Thickness EachL583-119 • 1 3/8” L583-120 • 1 3/4” $4.50L583-121 • L Escutcheon thru-bolts 2”L583-122 • 2 1/4”L583-123 • 2 1/2” 5.30L583-287 • L Escutcheon mounting screws, L9175 half dummy — 4.00K510-389 • N Escutcheon thru-bolts 1 3/4” 5.30 K510-390 • 2” – 2 1/4”L583-133 • N Escutcheon mounting screws, L0170 single dummy — 4.00

Note: 1) Two required per lock.

Note: 2) Two required per lock. Note: 3) LV mounting posts are required for all Vandlgard® applications.

Mounting Posts Part Price Number Door Thickness EachL583-211 1 3/8”L583-212 1 3/4”L583-213 2”L583-214 2 1/4” $8.40L583-215 2 1/2”L583-216 2 3/4”L583-217 3”L583-218 3 1/4” 21.60 L583-219 3 1/2”

LV Mounting Posts Part Price Number Door Thickness EachL583-497 1 3/4” L583-498 2” L583-499 2 1/4” $17.70L583-500 2 1/2” L583-501 2 3/4” L583-502 3” L583-503 3 1/4” 23.70L583-504 3 1/2”

Spindles and Springs Part Price Number Description EachL283-060* Spindle & spring, 1 3/8” – 1 7/8” $5.70 doorsL283-061* Spindle & spring, 2” – 3 1/2” doors 7.20L283-064 Spindle & spring, L0172 full 10.30 dummyL283-065 Spindle & spring, L0170 half 5.50 dummy

* Two required per lock.

Electrified Lock Part Price Number Description EachL283-053 Solenoid and driver, EL or EU $352.00

Spindle and Spring KitWhen ordered SEPARATELY from locks. Parts PriceL283-198 (2) Spindles & springs, for 1-3/8” - 1-7/8” doors $11.50L283-199 (2) Spindles & springs, for 2” - 3-1/2” doors 13.70

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-40

L • Parts Lock Cases

Lock Cases Part Price Number Lock Function and Description Each

L283-039 L9076, Classroom holdback $270.00 L9077, Classroom security holdback

L283-062 L9440, Privacy with deadbolt 244.00 L9444, Privacy with deadbolt and coin turnL283-085 L9082 EL, Electrically locked 875.00L283-086 L9082 EU, Electrically unlocked 875.00L283-099 L460, L462, L463, L464, L480, L496, Deadbolt 163.00L283-126 L9056, Entrance w/ simultaneous retraction 270.00L283-131 L9010, Passage 155.00

L283-132 L9040, Privacy 229.00 L9044 Privacy with Coin turn

L9050, Office

L283-133 L9060, Apartment entrance 270.00 L9070, Classroom L9071, Classroom securityL283-134 L9080, Storeroom 270.00L283-137 L9453, Entrance 297.00 L9456, Corridor L283-138 L9457, Classroom security 397.00 L9496, Privacy w/ “Occupied” indicatorL283-139 L9460, L9462, L9463, L9464, Deadbolt 205.00 L9465, ClosetL283-140 L9466, Storeroom 297.00 L9473, Dormitory L9480, Storeroom with deadboltL283-141 L9485, Faculty Restroom 373.00 L9486, Faculty RestroomL283-142 L9080 EL, Electrically locked (Fail Safe) 875.00L283-143 L9080 EU, Electrically unlocked (Fail Secure) 875.00L283-144 L9175, Single dummy 231.00L283-145 L9176, Double dummy 231.00L283-146 L9082, Institution 270.00L283-310 L9458, Classroom security w/ deadbolt and aux latch 297.00

LV Lock Cases Part Price Number Lock Function and Description Each

L283-170 LV9050, Office and Inner Entry Lock LV9060, Apartment Entrance Lock $338.00

LV9070, Classroom Lock LV9071, Classroom Security LockL283-171 LV9040, Bath/Bedroom Privacy Lock LV9044, Privacy Lock With Coin Turn Outside 297.00

L283-172 LV9076, Classroom Holdback Lock LV9077, Classroom Security Holdback Lock 338.00

L283-173 LV9080, Storeroom Lock 338.00L283-174 LV9080EL, Electrically Locked (Fail Safe) 913.00L283-175 LV9080EU, Electrically Unlocked (Fail Secure) 913.00L283-176 LV9453, Entrance Lock 365.00L283-177 LV9456, Corridor Lock LV9457, Classroom Security Lock 365.00 LV9496, L9486 Lock With “OCCUPIED” IndicatorL283-178 LV9480, Storeroom Lock With Deadbolt LV9485, Faculty Restroom 436.00 LV9486, Faculty Restroom w/”Do Not Disturb” IndicatorL283-180 LV9056, L9050 Lock With Simultaneous Retraction 338.00L283-181 LV9440, Privacy Lock With Deadbolt 312.00 LV9444, Privacy Lock With Deadbolt and Coin Turn OutsideL283-182 LV9082, Institution Lock 338.00L283-310 LV9458, Classroom security w/ deadbolt and aux latch 365.00

Note: 1) Includes lock case only. Armors, strikes, mounting screws, and cylinders must be ordered separately. 2) All lock cases are shipped right hand.

L-41Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts Parts • L

Miscellaneous Parts Part Price Number Description Each36-080 O-ring, L9080 EL/EU $2.2039-042 Plastic lock case cover for display - for locks manufactured after January, 1998 68.90K110-550 Pack of truarc ring (1), spacer (2), knobs 6.20K510-320 Wood plug, dummy, L0170, L0172 6.40K510-842 Electrified lock bushing, L9080 EL/EU .84L283-003 Deadbolt (except L9453, L9465, L9466, L9473) 42.00L283-004 Entrance deadbolt, L9453 42.00L283-006 Auxiliary latchbolt assembly 13.30L283-008 Latchbolt assembly (except L9076) 42.00L283-010 Locking link, L9076 13.60L283-029 (2) Spacers for ANSI A115.1 metal door preparations 26.90L283-030 Pack of 20 truarc rings, levers 15.80L283-031 Mounting plate, inside lever 14.60L283-040 Spring cage (1 required per lever) 7.20L283-049 Latchbolt assembly, L9076 42.00L283-055 Cylinder retainer plate and screw - for locks manufactured after April, 1994 13.30L283-057 (2) Mounting Post, (2) Screws, L-series, OSU 20.90L283-075 Deadbolt, L9465, L9466, L9473 42.10L283-112 Lock case, L9000-Series - for locks manufactured after January, 1998. 42.10L283-127 Lock case and cover, L400-Series 60.40L283-128 Lock case, L400-Series. See L283-127 for sellable part. —L283-150 Mounting plate for inside rose trim on one side of door only 29.30L583-004 Standoff post 1.70L583-015 Latchbolt guide 2.80L583-019 Retractor hub (2 required per lock) 3.10L583-020 Retractor hub spacer 3.30L583-021 Retractor lever 2.90L583-022 Retractor rocker 2.20L583-023 Blocking plates 2.80L583-024 Retractor link 5.70L583-025 Retractor crank 5.70L583-026 Hub spring 1.20L583-027 Fire door fuse 1.70L583-028 Fire door catch 2.20L583-029 Turn hub 14.30L583-030 Entrance hub 19.90L583-031 Cam follower 7.80L583-035 Turn hub spring 2.80L583-038 Auxiliary bar guide 2.10L583-043 Locking catch, L9080 EL/EU 14.30L583-044 Stop spring 1.30L583-045 Locking catch (except L9080 EL/EU) 14.60L583-047 Catch spring 3.30L583-048 Locking link (except L9076) 3.30L583-049 Entrance link 5.50L583-050 Link pin 1.30L583-051 Transfer lever 1.30L583-053 Simultaneous retractor (except L9040 and L9056) 5.70L583-056 Catch pin 2.90L583-057 Spindle anchor 22.80L583-058 Simultaneous retractor, L9040, L9056 6.00L583-063 Spring retainer, L9080 EL/EU 6.30L583-064 Solenoid spring, L9080 EL/EU 2.00

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-42

L • Parts Miscellaneous Parts (continued)

Miscellaneous Parts (cont’d) Part Price Number Description EachL583-065 Electrified link, L9080 EL/EU $8.80L583-066 Mounting plate screw (2 required per lock) 1.00L583-156 Transfer lifter 5.40L583-174 Holdback dog, L9076 4.50L583-192 Dog spring, L9076 0.46L583-196 Auxiliary stop 4.40L583-286 Mounting bar, L0170, L0172 17.70L583-290 Mounting plate screw, knob dummy trim, L0170, L9175 1.10L583-291 Mounting plate screw, lever dummy trim, L0170, L9175 1.10L583-321 Mounting plate, inside knob 5.40L583-322 Spacer for fixed levers 2.90L583-426 Faceplate tab 1 1/4” - for locks manufactured after July, 1994 3.80L583-427 Faceplate tab 1 1/16” - for locks manufactured after July, 1994 4.40L583-454 Case cover screw (4 required per L9000-Series lock case; 3 required per L400-Series lock case) 1.10L583-468 Dummy spindle anchor 97.30L583-481 Cylinder retainer screw - for locks manufactured after April, 1994 2.00L583-485 Lock handing screw - for locks manufactured after April, 1994 1.20L583-490 Cylinder retainer - for locks manufactured after January, 1998 5.20L583-492 Cylinder retainer screw plate - for locks manufactured after April, 1994 2.50L583-494 Lock case cover, L400-Series. See L283-127 for sellable part. 18.70L583-496 Lock case cover, L9000-Series - for locks manufactured after January, 1998 18.70

Anti-Ligature Conversion Kits - for 1-3/4” thick doors only Part Conversion PriceNumber Converts Contents Instructions Each

L9010, L9060, L9070, L9071, L9076, L9077, L9080, L9080EL, L9080EU, L9082, L9082EL, L9082EU, L9176, L9457, L9458, L9465, L9466, L9482, to anti-ligature

09-155 $907.00(2) anti-ligature knob assemblies(2) anti-ligature blocking rings

L9050, L9056, L9412, L9453, L9456, L9460 w/ pull, L9473, L9480, L9485, to anti-liga-ture

09-156 $1,135.00(2) anti-ligature knob assemblies(1) anti-ligature blocking ring(1) anti-ligature thumbturn assembly

L9010, L9060, L9070, L9071, L9076, L9077, L9080, L9080EL, L9080EU, L9082, L9082EL, L9082EU, L9176, L9457, L9458, L9465, L9466, L9482, to anti-ligature

09-138 $1,182.00(2) anti-ligature lever assemblies(2) anti-ligature blocking rings(2) trim ferrules

L9050, L9056, L9412, L9453, L9456, L9460 w/ pull, L9473, L9480, L9485, to anti-liga-ture

09-139 $1,410.00(2) anti-ligature lever assemblies(1) anti-ligature blocking ring(1) anti-ligature thumbturn assembly(2) trim ferrules

L9040, L9440 to anti-ligature09-189

L462, L464, L9462, L9464 to anti-ligature (2) anti-ligature blocking rings09-157

L460, L480, L9460 to anti-ligature (1) anti-ligature blocking ring(1) anti-ligature thumbturn assembly09-158

$1,410.00

$108.00

565.00

anti-ligature lever assemblies(1) anti-ligature thubturn assembly(1) emergency ADA turn(1) emergency button (2) trim ferrules

L9040, L9440 to anti-ligature09-159 $1,135.00(2) anti-ligature knob assemblies (1) anti-ligature thubturn assembly (1) emergency ADA turn (1) emergency button

Seeinstruction

sheet

Seeinstruction

sheet

Convert to Anti-Ligature Lever

Convert to Anti-Ligature Knob

Deadbolt conversion to anti-ligature

Notes: 1) For 1 3/4” doors w/ sectional trim only 2) Available in 630 (Satin Stainless Steel) or 630AM (Satin Stainless Steel Anti-Microbial) finish only 3) If applicable please specify “P” for (P) cylinder types, “R” for (R,J,F,T) cylinder types, and “BD” for (BD, BDC, GD, HD) cylinder types following the part number. Not available with the “L” cylinder option (lock less cylinder).

L-43Price Book 74Effective March 4, 2013 • Rev. 3/13

Classroom Security Function Conversion KitsVandlegard Retrofit kit Parts • L

Classroom Security Function Conversion Kits Part Price Number Converts Contents Conversion Instructions EachRose Trim38-090 L9070P to L9071P (1) 30-001-118 Cylinder Add cylinder and 1 blocking ring $87.10 L9076P to L9077P (2) 36-082-018 Blocking Ring to inside. Add 1 blocking ring to outside.38-091 L9070R to L9071R (1) 30-008 Cylinder Add cylinder and 1 blocking ring 139.00 L9076R to L9077R (2) 36-082-050 Blocking Ring to inside. Use 1 blocking ring to replace38-092 L9070BD to L9071BD (1) 80-108 Cylinder existing outside blocking ring. 87.10 L9076BD to L9077BD (2) 36-082-050 Blocking RingL Escutcheon Trim38-093 L9070P to L9071P (1) 30-001-118 Cylinder Replace existing inside escutcheon. $194.00 L9076P to L9077P (includes Compression Add cylinder and compression spring Spring and Ring) only to inside. Add compression ring (1) 36-082-012 Blocking Ring only to outside.* (1) 09-635 Escutcheon38-094 L9070R to L9071R (1) 30-008 Cylinder Replace existing inside escutcheon. 194.00 L9076R to L9077R (1) 36-082-012 Blocking Ring Add cylinder and blocking ring to inside. (1) 09-635 Escutcheon38-095 L9070BD to L9071BD (1) 80-108 Cylinder Replace existing inside escutcheon. 139.00 L9076BD to L9077BD (1) 09-635 Escutcheon Add cylinder to inside.

Notes: 1) Specify finish and keying. 2) Subject to same discount as L-Series Locks. 3) Use of these kits requires drilling hole in door for inside cylinder.

* Also add blocking ring to outside of 1 5/8” doors. Use compression spring only on outside of 1 7/8” doors.

Vandlgard Retrofit Kit - Specify door thickness (1 3/4” - 3 5/8”) when ordering Part Conversion Price Number Converts Contents Instructions Note Each39-034 L to LV (1) L283-200 Mounting Post Pack (1) L583-345 Catch Retractor (1) L283-147 Retractor Assembly (1) L583-383 Crank Retractor (1) L583-386 Bottom Hub $46.20 (1) L583-387 Top Hub (1) P515-528 Handing Label (1) P515-683 Instruction Sheet 39-234 L9082 and L9482 to (1) L283-200 Mounting Post Pack LV9082 and LV9482 (1) L583-346 Spacer 42.40 (1) L583-386 Bottom Hub (1) L583-387 Top Hub (1) P515-528 Handing Label (1) P515-683 Instruction Sheet

Please refer to instruction sheet. For first time users, an instructional video is available.

For L9080, L9480, L9485 and L9486 functions, add to kit (1) L283-040 Spring Cage.

Please refer to instruction sheet. For first time users, an instructional video is available.

Add to kit (2) L283-040 Spring Cages

L9040L9044L9440L9444L9050L9056L9070

L9076L9080L9453L9456L9480L9485L9486

L9496L9060L9071L9077L9082L9457

Miscellaneous Parts Part Price Number Description Each L283-040 Spring Cage (1 required per lever) $7.20

Price Book 74Effective March 4, 2013 • Rev. 3/13

L-44

L • PartsStandard Screw Packs, Torx® Screw Packs,

Special Parts

Screw Packs, Standard Part Specify Price Number Finish Description Contents EachC203-736 455 Lock case mounting (2) C603-256, #12-24 WMS PFH $5.00C203-736 • Strike Screws (2) C603-256, #12-24 WMS PFHK110-020 • Armor mounting (2) K510-210, #8-32 x 1/4” PFHMS 0.62K110-947 • Rose trim thumbturn screw pack (2) K510-445, #4 x 1/2” POH AB 5.80L283-100 Trim mounting screws and (2) L583-066, #8-32 x 1/2” PFH 20.90 posts, 1 3/4” doors (2) L583-212, 1 3/4” Mounting PostsL283-101 • L Escutcheon thru-bolts, 1 3/4” (2) L583-120 8.20 doors

Screw Packs, Torx®

Part Specify Price Number Finish Description Contents EachL283-121 • Rose trim without thumbturn (2) Armor screws, #8-32 x 1/4” (T-15) $15.30 (2) Strike screws, #12-24 x 1/2” (T-20)L283-123 • L Escutcheon trim for 1 3/4” (2) Armor screws, #8-32 x 1/4” (T-15) 16.00 doors (2) Strike screws, #12-24 x 1/2” (T-20) (2) Esc. mtg. screws, 1/4- 28 x 2 1/8” (T-30)L283-122 • Rose trim with thumbturn (2) Armor screws, #8-32 x 1/4” (T-15) 16.00 (2) Strike screws, #12-24 x 1/2” (T-20) (2) Thumbturn screws, #4 x 1/2” (T-8)XL11-848*6 • N Escutcheon trim for 1 3/4” (2) Armor screws, #8-32 x 1/4” (T-15) 16.00 doors (2) Strike screws, #12-24 x 1/2” (T-20) (2) Esc. mtg. screws, #8-32 x 1 1/2” (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tools. * Not subject to standard discount terms.

Special Parts 6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Price Number Finish Description EachXL11-422 Solid latchbolt (nylon insert), for use with electric strikes $54.40XB11-720 • Mortise cylinder turn unit with ADA compliant style thumbturn 30.50 Added to 09-900, 09-904, 09-905 or 09-907XL12-196 • Mortise cylinder turn unit with coin turn 29.00 Added to 09-900XK10-992* • 10-072 Strike over 2” thru 6” lip 103.00XL11-515 1/8” Thick lead plate. Also specify lock function and door hand 257.00XL11-634 • Blank inside L Escutcheon 160.00XL11-636 • Blank outside L or N Escutcheon 219.00XL11-743 • Armor front with cutout to receive deadbolt only, for use with L9110, L9175 and 67.00 L9176 dummy functions. XL11-820 • Strike, 1 3/16” lip, one hole for latching functions, RH & LHR doors 21.60 XL11-821 • Strike, 1 3/16” lip, one hole for latching functions, LH & RHR doors

6 Extended Factory Lead Time

* Specify lip length. 625 used for 629 finish and 626 used for 630 finish.

S-1Price Book 74Effective March 4, 2013 • Rev. 3/13

SIntroduction

Table of ContentsFunctions S-2Complete Locks S-3

Options S-4 Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . S-4 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-4 Full Size Interchangeable Core Full Size Construction Core . . . . . . . . . . . . . S-5 Locks Less Components . . . . . . . . . . . . . . . S-5 Primus® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6 Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . S-6 Tamper Resistant Torx® Screws . . . . . . . . . . S-6Parts S-7 Levers, Standard . . . . . . . . . . . . . . . . . . . . . . S-7 Levers and Related Parts, Interchangeable Core . . . . . . . . . . . . . . . . . . S-7 Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7 Trim Combinations . . . . . . . . . . . . . . . . . . . . S-8 Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . S-9 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-9 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . S-10 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-10 Screw Packs, Standard . . . . . . . . . . . . . . . S-10 Screw Packs, Torx® . . . . . . . . . . . . . . . . . . . S-10 Special Parts . . . . . . . . . . . . . . . . . . . . . . . . S-10Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification S 51 P D

Latch Suffix D = Deadlatch

Cylinder Suffix P = 6-Pin Cylinder L = Less 6-Pin Cylinder R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core

Function

Lock Series

Finish Codes and DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated

Standard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1” x 2 1/4”, Square corner faceplate, 7/8” housing diameter, 1/2” throwStrike 1 1/8” x 2 3/4”, Square corner, T-strike, boxBackset Dual backset latch, fits either 2 3/8” or 2 3/4” backsetsCylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range 1 3/8” – 2” (except S40D: 1 3/8” – 1 7/8”)Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S-2

S • Functions Notes

ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed Locks

SCHLAGE ANSI

S10D F75 Passage LatchBoth levers always unlocked.

S40D F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlockedfrom outside with small circular tool.Turning inside lever releases button.Closing the door does not releasebutton (restoring).

S51PD F81 Entrance Lock

S70PD F84 Classroom LockOutside lever locked and unlocked bykey. Inside lever always unlocked for immediate egress.

S80PD F86 Storeroom LockOutside lever fixed. Entrance by keyonly. Inside lever always unlocked for immediate egress.

S170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

Keyed Locks

SCHLAGE ANSI

S-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Complete Locks • S

* Specify door hand when ordering FLA design.

Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

S-Series Lever Style FLA* SAT JUP NEP Finishes 626 605 606 613 619 625 6Additional Leadtime Function Description 609 KeylessS10D Passage $170 $182 $200S40D Privacy 211 223 241S170 Single dummy 80 86 96KeyedS51PD EntranceS70PD Classroom $267 $279 $297S80PD Storeroom

Flair (FLA)* Jupiter (JUP) Neptune (NEP) Saturn (SAT)

* Specify door hand when ordering FLA design.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S-4

S - Options Notes

16-203Standard

10-001Standard

10-025 10-027

16-204

Deadlatches Hsg Add to Backset Description Dia Specify Lock Price 2 3/8” or Square corner, 1” x 2 1/4”, standard 16-203* N/C 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 7/8” 16-204 5” Square corner, 1” x 2 1/4” 16-132* $8.50

* Latch includes F506-868 latch front adapter for 1 1/8” preparation, and G506-815 housing sleeve for 1” housing.Note: 1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate the UL Listing.

Strikes Add to Description Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 1 1/8” 10-001 N/CSquare corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 10-001 $6.30 1 1/2”, 1 3/4”, 2”1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 10-004 N/CANSI, no box, 1 1/4” x 4 7/8” 1 3/16” 10-025 N/C 1 3/8”, 1 1/2” 11.70Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-026 N/C1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 10-027

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Notes: 2) Electric strike (10-042) is available as a part. See S Parts: Strikes. 3) Strikes with long-lip lengths are sold as parts. See S Parts: Special Parts.

S-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable Core, Full Size Construction Core,Locks Less Components Options • S

Full Size Interchangeable CoreFull Size Construction Core Lock Price Description Specify (per core)Full size core* R suffix Add to Lock Price Example: S51RD SAT $28.00Full size construction core** T suffix Add to Lock Price Example: S51TD SAT 28.00Less full size core J suffix Deduct from Example: S51JD SAT Lock Price 25.00

Locks Less Components Deduct from Description Specify Lock PriceLess standard cylinder L suffix $48.00 Example: S51LD Less deadlatch LLL for latch 16.70 Example: S51PD SAT 626 LLL 10-025 Less strike LLL for strike 3.70 Example: S51PD SAT 612 16-204 LLL

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is available with JUP, NEP, and SAT designs only.

Jupiter (JUP) Neptune (NEP) Saturn (SAT)

Price Book 74Effective March 4, 2013 • Rev. 3/13

S-6

S • OptionsPrimus®, Tactile Warning, Torx® Screws,

Non-Standard Finishes

Primus®

Primus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms& Conditions for more information. Description SpecifyS-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder separately. See S: Complete Cylinders. Example: 1 ea. S51LD 1 ea. 20-752S-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus corecylinder separately. See Cylinders: Interchangeable Core. Example: 1 ea. S80JD 1 ea. 20-740

Tactile Warning (knurling)

(SAT lever shown)

Tactile Warning Add to Lock Price Description Specify (per lever Knurling Preface the design code with 8 $36.90 Example: 8SA for SAT

Notes: 1) Knurling is available in SAT design only. 2) Outside lever only is knurled unless otherwise specified.

Tamper Resistant Torx® Screws Description Specify Add to Lock PriceLatch and strike screws Torx screws $15.00

S-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Lock Trim: Levers, Levers and Related Parts,Interchangeable Core, Roses Parts • S

Roses Designs and Finishes SAT (use for all designs) 605 606 626 619 613 625 Part 6 Additional Leadtime Number Description 60908-021 Inside rose $18.80 $20.80 $22.80

Levers, Standard Designs and Finishes JUP NEP SAT FLA* 605 606 626 619 625 613 6 Additional Leadtime Number Description 609 08-020 Cylinder lever $51.00 $57.00 $67.00

* Specify hand of lever when ordering FLA design.

Levers and Related Parts, Interchangeable Core Designs and Finishes JUP NEP SAT FLA* 605 606 626 619 625 613 6 Additional Leadtime Number Description 60908-027 Full size core lever $51.30 $57.30 $67.3008-030 Full size core lever, driver, retainer (converts PD to JD) 60.70 66.70 76.70S605-242* Full size core driver 6.70S605-241* Full size core retainer 3.00

* Specify hand of lever when ordering FLA design.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S-8

S • Parts Lock Trim: Trim Combinations

* Specify hand of lever when ordering FLA design. ** Available in SAT design only.

Levers and Related Parts, Interchangeable Core Designs and Finishes JUP NEP SAT FLA* 626 605 606 613 619 625 6 Additional Leadtime Number Description 609 Inside Chassis and Lever 68-011 S10, S70, S80 $79.60 $85.60 $95.60 68-012 S40 88.80 94.80 104.80 68-013 S51 88.80 94.80 104.80 Outside Chassis, Rose and Lever 68-001 S10 $74.40 80.40 $90.40 68-002 S40 77.50 83.50 93.50 Outside Chassis and Rose 68-003** S51, S70 $56.60 62.60 $72.60 68-004** S80 56.60 62.60 72.60

S-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Deadlatches, Strikes Parts • S

16-203 16-204 39-030

Deadlatches Specify Hsg Part Number Finish Backset Description Dia Price Each16-203* • 2 3/8” or Square corner, 1” x 2 1/4”, standard $27.60 16-204 • 2 3/4” 1/4” Radius round corner, 1” x 2 1/4” 7/8”16-132* • 5” Square corner, 1” x 2 1/4” 35.1039-030** • — Rabbeted latch and strike kit, 605 and 626 only — 42.10

* Latch includes F506-868 latch front adaper for 1 1/8” preparation and G506-815 housing sleeve for 1” housing. ** This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preparations.

Note: 1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate the UL Listing.

10-001 10-025 10-027 10-042

Strikes Part Specify Price Number Finish Description Lip Length Each10-001* • Square corner, T-strike, box, 1 1/8” x 2 3/4”, standard 1 1/8” $8.0010-001* • Square corner, T-strike, box, 1 1/8” x 2 3/4” 1”, 1 1/4”, 10.60 1 1/2”, 1 3/4”, 2”10-004 • 1/4” Radius round corner, T-strike, box, 1 1/8” x 2 3/4” 1 1/8” 8.60

10-025* • ANSI, no box, 1 1/4” x 4 7/8” 1 3/16” 11.60 1 3/8” 33.00K510-066 Box for ANSI strike — 5.4010-026 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.50 10-027 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.8010-042 • Electric strike, 1 1/4” x 4 7/8”, 606 and 626 only — 212.00

* Specify lip length.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S-10

S • PartsAdapters, Screws, Standard Screw Packs,

Torx® Screw Packs, Special Parts

38-018 A501-878 G506-815

Adapters Part Specify Price Number Finish Description Each38-018 • Thin door extension ring (2 required per lock) $9.50A501-878 Latch front adapter (use with 1” faceplate in 1 1/8” door prep.) Order in multiples of 100 0.54G506-815 1” Long latch housing sleeve to adapt 7/8” diameter housing to 1” bore 5.60

Screw Packs, Standard Part Specify Price Number Finish Description Contents EachS306-180 Mounting, S170 (2) S506-960 $3.80S306-182 • Mounting, latch and strike (2) F506-278 (4) C603-897 8.80 (1) M504-271S306-183 • Mounting, latch and ANSI strike (2) F506-278 (2) C603-256 8.60 (2) C603-897 (1) M504-271

Screws Price Each Part Specify (Order in Number Finish Description Type Size multiples of 100)C603-256 • ANSI strike PFH Combo 12-24 x 1” $0.76C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4” 0.88F506-278 Mounting RPH Mach. 8-32 x 1 1/2” 0.84F506-237 Mounting Wood #8 x 3/4” 0.64

Screw Packs, Torx®

Part Specify Price Number Finish Description EachC203-311 • Latch and standard strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $15.30 (2) L583-371 (T-20)

Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Specify Price Number Finish Description Each

XQ07-351 • 10-025 Strike, 7/8” flat lip $21.60 10-025 Strike, lips through 6” (except 7/8”, 1 3/16”, 1 3/8” and 1 1/2”) 105.00

Notes: 2) Specify lip length. 3) If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center Process in the forms and example section.

CS210-1Price Book 74Effective March 4, 2013 • Rev. 3/13

CS210Introduction

Table of ContentsFunctions CS210-2Complete Locks CS210-3Options CS210-5 Deadbolts/Deadlatches . . . . . . . . . . CS210-5 Deadbolt Strikes . . . . . . . . . . . . . . . CS210-5 Deadlatch Strikes . . . . . . . . . . . . . . CS210-5 Strike Combinations . . . . . . . . . . . . CS210-5 Locks Less Components . . . . . . . . CS210-6Parts CS210-7 Levers, Standard . . . . . . . . . . . . . . . CS210-7 Deadbolts . . . . . . . . . . . . . . . . . . . . CS210-8 Deadlatches . . . . . . . . . . . . . . . . . . CS210-8 Deadbolt/Deadlatch Combinations CS210-8 Deadbolt Strikes . . . . . . . . . . . . . . CS210-9 Deadlatch Strikes . . . . . . . . . . . . . . CS210-9 Deadbolt/Deadlatch Strike Combinations . . . . . . . . . . . . . . . . . CS210-9 Adapters . . . . . . . . . . . . . . . . . . . . CS210-10 Screw Packs . . . . . . . . . . . . . . . . . CS210-10Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification CS2 10 P D

Latch Suffix D = Deadlatch Cylinder Suffix P = 6-Pin Cylinder(s) L = Less 6-Pin Cylinder(s) R = Full Size Interchangeable Core J = Less Full Size Interchangeable Core T = Full Size Construction Core B = Less SFIC BDC = Disposable SFIC G = Everest 29 Patented SFIC H = Construction Core

Function

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass609 (US 5) Antique Brass619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated643e (US 11) Aged Bronze

Standard Features

Certification: ANSI/BHMA Certified A156.12-2005, Grade 2, UL listed for 3-hour fire door With SFIC interchangable core cylinders: Grade 3 SecurityDeadbolt: 1 X 2-1/4”, dual option faceplate, (square corner standard, round corner included in package), 1” housing diameter, 1” throw Latch 1” x 2-1/4” dual option faceplate (square corner standard, round corner included in package). 1” edge bore required Strikes: 1-1/8” X 2-3/4”, Square corner (deadbolt) and 1-5/8” X 2-1/4”, Square corner, T-strike, box, 1 1/8” x 2 3/4” (Deadlatch) Backset: Adjustable backset, fits 2-3/8” or 2-3/4” Cylinders: 6-pin, solid brass, keyed 6-pin, S123 keyway, keyed different (KD) Door Range: 1-3/4” to 2” standard (1-3/8” available, must be specified) Keys: Nickel silver cut keys, 6-pin, S123 section Center to Center: Fits 4” or 5-1/2” center to center door preps *

* 5-1/2” center-to-center default set-up from factory

Price Book 74Effective March 4, 2013 • Rev. 3/13

CS210-2

CS210 • Functions

ANSI/BHMA Certified A156.12-2005, Grade 2, UL Listed for 3-hour fire door.

SCHLAGE ANSI

CS210PD F95 Entrance, Single LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit.

CS210-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Complete Locks • CS210CS210-Series

CS210-Series Lever Designs

Accent (ACC) Avanti (AVA)

Elan (ELA) Flair (FLA) Jazz (JAZ)

Manhattan (MNH)

Callington (CLT)

Champagne (CHP)

Merano (MER)Jupiter (JUP) Latitude (LAT)

St. Annes (STA)Saturn (SAT)Neptune (NEP)

Camelot (CAM) Plymouth (PLY)

CS210-Series Escutcheon

Avila (VLA)

(Specify door hand)

(Specify door hand)

(Specify door hand)

(Specify door hand)

(Specify door hand)

(Specify door hand)

(Specify door hand)

(Specify door hand)

Price Book 74Effective March 4, 2013 • Rev. 3/13

CS210-4

CS210 • Complete Locks CS210-Series Complete Locks, Deadbolts/Deadlatches

Notes: 1) Split designs and/or finishes are priced at the higher design and/or finish price. 2) Keying options: see Keys & Keying. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Deadbolts/Deadlatches Specify Hsg Combo Add toBackset Description Dia Deadbolt Deadlatch Number Lock Price 2 3/8” Dual Option, 1” x 2 1/4”, standard or (square corner standard, round corner included 1” 12-340 16-260 12-339 N/C 2 3/4” in the package)

CS210-Series Escutcheons CAM PLY Designs and Finishes ACC AVA CLT CHP ELA FLA JAZ JUP LAT MER MHN NEP SAT STA VLAFunction Description 626 605 609 619 625 643eKeyed, Single Locking CS210PD Entrance $309 $321

CS210 - How to OrderFunction Cylinder Design Finish Escutcheon

CS210 P LAT 626 CAM

CS210-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Options • CS210Deadbolt Strikes, Deadlatch Strikes,Strike Combinations

10-094Standard

10-092 10-095 10-116

Deadbolt Strikes Add to Description Lip Length Specify Lock PriceSquare corner, box, 1 1/8” x 2 3/4”, standard — 10-094 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-092 N/CSquare corner, full lip, no box, 1 5/8” x 2 1/4” 10-095Round corner strike, no lip, 1 1/8” X 2 3/4” – 10-116

10-001Standard

10-026 10-027

Deadlatch Strikes Add to Description Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 10-001Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-026 N/C 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 10-027

Strike Combinations Specify Deadbolt Combo Add to Strike Deadlatch Strike Number Lock Price 10-094 10-001 10-109 10-094 10-026 10-121 10-116 10-027 10-122 N/C 10-092 10-027 10-123 10-095 10-026 10-124

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CS210-6

CS210 • OptionsFull Size Interchangeable Core,

Locks Less Components

Locks Less Components Deduct from Description Specify Lock PriceLess standard cylinder(s) L suffix $48.00 Example: CS210LD Less deadbolt strike LLL for deadbolt strike 3.90 Example: CS210PD SAT 12-339 LLL/10-001Less deadlatch strike LLL for deadlatch strike 3.20 Example: CS210PD SAT 12-339 LLL/10-094

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.

* Key symbol must be specified. Everest B Family keyways are restricted. See Term & Conditions for more information. ** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.

Note: 1) Control Keys are not furnished with locks and must be ordered separately. See Keys and Keying.

CS210 - Full Size - Interchangeable and Construction CoresDescription Specify Price

Full size core* R suffixExample: CS210RD

Add to lock price:$28.00

Full size construction core** T suffix Example: CS210TD

Add to lock price:$28.00

Less full size core J suffixExample: CS210JD

Add to lock price:$25.00

CS210 - Small Size - Interchangeable and Construction CoresDescription Specify Price

Everest patented core* G suffixExample: CS210GD

Add to lock price:$59.00

Small format construction core** H suffix Example: CS210HD

Add to lock price:$32.00

Less small format core B suffixExample: CS210BD

Add to lock price:N/C

Small format disposable core BDC suffixExample: CS210BDC

Add to lock price:N/C

Full Size Interchangeable Core

Small Format Interchangeable Core

CS210-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts • CS210Deadbolts, Deadlatches, Combinations

12-340

16-260

Deadbolts Part Specify Price Number Finish Backset Description Hsg Dia Each

12-340 • 2 3/8” or

Square corner, 1” x 2 1/4”, standard $31.70 Round corner, 1”x 2 1/4”, included

1”12-291 •

2 3/4” Square corner, 1 1/8” x 2 1/4” 31.70

12-633 • 5” Square corner, 1 1/8” x 2 1/4” 67.30

Deadlatches Part Specify Price Number Finish Backset Description Hsg Dia Each 16-260 •

2 3/8” or Square corner, 1” x 2 1/4”, standard $27.20

2 3/4”

Round corner, 1” x 2 1/4”, included 1” 16-228 • Square corner, 1 1/8” x 2 1/4” 27.20 16-132 • 5” Square corner, 1” x 2 1/4” 35.10

Deadbolt/Deadlatch Combinations Combo Specify Price Number Finish Backset Description Deadbolt Deadlatch Each 12-339 • 2-3/8” or Dual Option, 1” x 2-1/4” 12-340 16-260 $58.90 16-483 • 2-3/4” Square corner, 1-1/8” x 2-1/4” 12-291 16-228 58.90 16-484 • 5” Square corner, 1-1/8” x 2-1/4”, deadbolt 12-633 16-132 102.40 and square corner, 1” x 2-1/4”, deadlatch

Note: 1) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL Listings and the ANSI Grade 2 certification.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CS210-8

CS210 • Parts Deadbolt Strikes, Deadlatch Strikes, Combinations

10-094 10-092 10-095

10-001 10-026 10-027

Deadbolt Strikes Part Specify Lip Price Number Finish Description Length Each10-094 • Square corner, box, 1 1/8” x 2 3/4”, standard - $12.4010-092 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.70 10-095 • Square corner, full lip, no box, 1 5/8” x 2 1/4”10-116 Round corner strike, no lip, 1 1/8” X 2 3/4” - 13.30

Deadlatch Strikes (Specifiy Finish) Part Lip Price Number Description Length Each10-001 Square corner, T-strike, box, 1 1/8” x 2 3/4” $7.5010-026 Square corner, full lip, no box, 1 5/8” x 2 1/4”, standard 1 1/8” 7.3010-027 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 7.30

Deadbolt/Deadlatch Strike Combinations (Specifiy Finish) Combo Price Number Deadbolt Strike Deadlatch Strike Each10-109 10-094 10-001, 1 1/8” Lip $19.9010-121 10-094 10-026 19.7010-122 10-094 10-027 19.7010-123 10-092 10-027 15.0010-124 10-095 10-026 15.00

10-116

S200-1Price Book 74Effective March 4, 2013 • Rev. 3/13

S200Introduction

Table of ContentsFunctions S200-2Complete Locks S200-3Options S200-5 Deadbolts/Deadlatches . . . . . . . . . . . S200-5 Deadbolt Strikes . . . . . . . . . . . . . . . . S200-5 Deadlatch Strikes . . . . . . . . . . . . . . . S200-5 Strike Combinations . . . . . . . . . . . . . S200-5 Full Size Interchangeable Core Full Size Construction Core . . . . . . . S200-6 Locks Less Components . . . . . . . . . S200-6 Primus® / Primus XP . . . . . . . . . . . . . S200-7Parts S200-8 Levers, Standard . . . . . . . . . . . . . . . . S200-8 Levers and Related Parts, Interchangeable Core . . . . . . . . . . . . S200-8 Escutcheons . . . . . . . . . . . . . . . . . . . S200-8 Trim Combinations . . . . . . . . . . . . . . S200-9 Deadbolts . . . . . . . . . . . . . . . . . . . . S200-10 Deadlatches . . . . . . . . . . . . . . . . . . S200-10 Deadbolt/Deadlatch Combinations S200-10 Deadbolt Strikes . . . . . . . . . . . . . . S200-11 Deadlatch Strikes . . . . . . . . . . . . . . S200-11 Deadbolt/Deadlatch Strike Combinations . . . . . . . . . . . . . . . . . S200-11 Adapters . . . . . . . . . . . . . . . . . . . . . S200-12 Miscellaneous Parts . . . . . . . . . . . . S200-12 Screws . . . . . . . . . . . . . . . . . . . . . . S200-12 Screw Packs . . . . . . . . . . . . . . . . . . S200-12 Screw Pack, Torx® . . . . . . . . . . . . . S200-12Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Product Identification S2 51 P D

Latch Suffix D = Deadlatch Cylinder Suffix P = 6-Pin Cylinder(s) L = Less 6-Pin Cylinder(s) R = Full Size Interchangeable Core(s) J = Less Full Size Interchangeable Core(s) T = Full Size Construction Core(s) Function

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated

Standard Features*Certification UL Listed for 3-hour fire door.Deadbolt 1 x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throwDeadlatch 1 x 2 1/4”, Square corner faceplate, 1” housing diameter, 1/2” throwStrikes 1 1/8” x 2 3/4”, Square corner, box (deadbolt) and 1 1/8” x 2 3/4”, Square corner, T-strike, box (deadlatch)Reinforcement Metal dust box reinforcer with three – 3” screwsBackset Adjustable for 2 3/8” or 2 3/4”Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, S123 keyway, keyed differ-ent (KD) — upper and lower cylinders are keyed alike** Door Range 1 3/8” – 2”Keys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-2

S200 • Functions

UL Listed for 3-hour fire door.

SCHLAGE ANSI

S210PD F95

S251PD F97

Entrance, Single LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit.

S280PD F98 Storeroom LockDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fully thrown. Outside lever is fixed. Entrance by key only. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed.

Entrance, Double LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fully thrown. Outside lever unlocked by key from outside when locked by turn button in inside lever. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed.

S290 Single Dummy TrimDummy trim for inside of door. Used for door pull or as matching inactive trim.

S270PD Classroom LockDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fully thrown. Outside lever is locked and unlocked by key from outside. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed.

S200-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Complete Locks • S200S200-Series

S200-Series Lever Designs and Inside Escutcheon

Saturn (SAT)* Jupiter (JUP) Neptune (NEP) Saturn (SAT)

Flair (FLA) Flair (FLA)

S200-Series FLAIR (FLA) Lever Designs and Inside Escutcheon

* Saturn Escutcheon used for Jupiter, Neptune and Saturn designs.

(Specify door hand)

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-4

S200 • Complete Locks S200-Series Complete Locks, Deadbolts/Deadlatches

* Specify door hand when ordering FLA design.

* Includes G506-815 housing sleeve for latch and bolt for 1 1/8” preparation.

Notes: 1) Split designs and/or finishes are priced at the higher design and/or finish price. 2) Upper and lower cylinders will be keyed alike unless otherwise specified. 3) Keying options: see Keys & Keying. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

16-481Standard

Deadbolts/Deadlatches Specify Hsg Combo Add toBackset Description Dia Deadbolt Deadlatch Number Lock Price 2 3/8” Square corner, 1” x 2 1/4”, Standard 12-288 16-480 16-481 or Round corner, 1” x 2 1/4” 12-289 16-204 16-482 N/C 2 3/4” Square corner, 1 1/8” x 2 1/4” 1” 12-291 16-228 16-483 Square corner, 1 1/8” x 2 1/4”, deadbolt, 12-633 16-132* 16-484

$22.90 5” and square corner, 1” x 2 1/4”, deadlatch

Shaded items are standard components and arefurnished with locks unless otherwise specified.

S200-Series Lever Style FLA* SAT JUP NEP Finishes 626 605 606 613 619 625 6 Additional Leadtime Function Description 609 KeylessS290 Single dummy $224 $230 $240 Keyed, Single Locking S210PD Entrance $344 $356 $374 Keyed, Double LockingS251PD Entrance S270PD Classroom $450 $462 $480 S280PD Storeroom

S200-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Options • S200Deadbolt Strikes, Deadlatch Strikes,Strike Combinations

10-094Standard

10-064 10-092 10-095

Deadbolt Strikes Add to Description Lip Length Specify Lock PriceSquare corner, box, 1 1/8” x 2 3/4”, standard — 10-094Circular drive-in, thimble strike, 1 3/16” diameter, 494 (for 626) only 10-064 N/C 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-092Square corner, full lip, no box, 1 5/8” x 2 1/4” 10-095

10-001Standard

10-026 10-027 10-058

Deadlatch Strikes Add to Description Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8” x 2 3/4”, standard 10-001Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 10-026 N/C 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 10-027Circular, adjustable, 1 3/4” diameter, 605 and 626 only 1 7/32” 10-058

Strike Combinations Specify Deadbolt Combo Add to Strike Deadlatch Strike Number Lock Price 10-094 10-001, 1 1/8” Lip 10-109 10-064 10-001, 1 1/8” Lip 10-251 10-094 10-026 10-110 10-064 10-026 10-253 10-094 10-027 10-111 N/C 10-064 10-027 10-256 10-092 10-027 10-257 10-064 10-058 10-258 10-095 10-026 10-259

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-6

S200 • OptionsFull Size Interchangeable Core,

Locks Less Components

Full Size Interchangeable CoreFull Size Construction Core Price Description Specify (per core)Full size core* R suffix Add to Lock Price All interchangeable core(s) $28.00 Example: S251RD SATFull size construction core** T suffix Add to Lock Price All construction core(s) 28.00 Example: S210TD JUPLess full size core J suffix Deduct from Less interchangeable core(s) Lock Price Example: S251JD JUP 25.00

* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bitted interchangeable cores. ** Locks are assessed one non-refundable handling charge (50-231) per core. See for details.

Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying. 2) Full size interchangeable core is available with JUP, NEP, and SAT designs only. FLA design available for S210 function.

Locks Less Components Deduct from Description Specify Lock PriceLess standard cylinder(s) L suffix $48.00 Example: S210LD each cylLess deadbolt LLL for deadbolt 14.70 Example: S251PD NEP 626 LLL/16-480 10-109Less deadlatch LLL for deadlatch 16.90 Example: S251PD NEP 626 12-288/LLL 10-109Less deadbolt strike LLL for deadbolt strike 1.60 Example: S251PD NEP 626 16-481 LLL/10-001Less deadlatch strike LLL for deadlatch strike 3.70 Example: S251PD NEP 626 16-481 10-094/LLL

Jupiter (JUP) Neptune (NEP) Saturn (SAT)

S200-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Options • S200Primus®

Primus® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Description SpecifyS200-Series keyed single locking lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder separately. See Cylinders Example: 1 ea. S210LD 1 ea. 20-569S200-Series keyed double locking lock and Primus cylinders Lock less cylinder (use L suffix). Order Primus cylinder(s) separately. See Cylinders Example: 1 ea. S251LD 1 ea. 20-769 1 ea. 20-752S200-Series lock and Primus full size interchangeable core Lock less full size core(s) (use J suffix). Order Primus core(s)cylinder(s) separately. See Cylinders Example: 1 ea. S280JD 2 ea. 20-740

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-8

S200 • PartsLock Trim: Standard Levers, Levers and Related Parts,

Interchangeable Core, Escutcheons

Escutcheons Designs and Finishes FLA SAT FLA FLA MET (use for JUP and NEP) MET SAT MET 605 605 606 606 609 609 Part 619 619 Number Description 626 626 625 625 613 61308-032 Inside escutcheon assembly $78.30 — $84.30 — $94.30 —36-056 Outside trim, tie-in escutcheon — $30.90 — $36.90 — $46.90

Levers, Standard Designs and Finishes JUP NEP SAT FLA* 626 605 606 609 613 619 625 Number Description

08-020 Cylinder lever $55.80 $61.80 $71.80

* Specify hand of lever when ordering FLA design.

Levers and Related Parts, Interchangeable Core Designs and Finishes JUP NEP SAT FLA* 605 606 613 626 619 625 6 Additional Leadtime Number Description 60908-027 Full size core lever $53.40 $59.40 $69.4008-030 Full size core lever, driver, retainer (converts PD to JD) 63.20 69.20 79.20S605-242* Full size core driver 7.00S605-241* Full size core retainer 3.10

* Specify hand of lever when ordering FLA design.

S200-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts • S200Lock Trim: Trim Combinations

* Specify hand of lever when ordering FLA design. ** Available in SAT design only.

Trim Combinations Designs and Finishes JUP NEP SAT FLA* 605 606 626 619 625 613 Part 6 Additional LeadtimeNumber Description 609

Outside Chassis, Rose and Lever 68-001 S210 $74.40 $80.40 $90.40Outside Chassis and Rose 68-003** S251, S270 $56.60 $62.60 $72.60 68-004** S280 56.60 62.60 72.60 Inside Chassis and Lever 08-034 S210, S270, S280 $79.50 $85.50 $95.50 08-035 S251 89.00 95.00 $105.00

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-10

S200 • Parts Deadbolts, Deadlatches, Combinations

12-288

16-480

Deadbolts Part Specify Price Number Finish Backset Description Hsg Dia Each12-288 •

2 3/8” or Square corner, 1” x 2 1/4”, Standard

12-289 • Round corner, 1”x 2 1/4” 1”

$31.7012-291 • 2 3/4” Square corner, 1 1/8” x 2 1/4” 12-633 • 5” Square corner, 1 1/8” x 2 1/4” 67.3039-030* • - Rabbeted latch and strike kit, 605 and 626 only - 42.10

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/4” rabbeted door and frame preparations.

Deadlatches Part Specify Price Number Finish Backset Description Hsg Dia Each 16-480 •

2 3/8” or Square corner, 1” x 2 1/4”, Standard

16-204 • 2 3/4”

Round corner, 1” x 2 1/4” 1” $27.20 16-228 • Square corner, 1 1/8” x 2 1/4” 16-132 • 5” Square corner, 1” x 2 1/4” 35.10 39-030* • - Rabbeted latch and strike kit, 605 and 626 only - 42.10

* This kit adapts square corner latches and 2 3/4” high square corner strikes to 1/4” rabbeted door and frame preparations.

Deadbolt/Deadlatch Combinations Combo Specify Price Number Finish Backset Deadbolt Deadlatch Each 16-481 •

2 3/8” 12-288 16-480

16-482 • 12-289 16-204 $58.90 16-483 •

or 2 3/4” 12-291 16-228

16-484 • 5” 12-633 16-132* 102.40

* Includes G506-815 housing sleeve for latch and bolt for 1 1/8” preparation.

Note: 1) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL Listings.

S200-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts • S200Deadbolt Strikes, Deadlatch Strikes, Combinations

10-094 10-064 10-092 10-095 10-112

10-001 10-026 10-027 10-058

Deadbolt Strikes Part Specify Lip Price Number Finish Description Length Each10-094 • Square corner, box, 1 1/8” x 2 3/4”, standard — $11.3010-064 • Circular drive-in, thimble strike, 1 3/16” diameter, 494 (for 626) only 11.0010-092 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 7.00 10-095 • Square corner, full lip, no box, 1 5/8” x 2 1/4”10-112 Metal dust box with screws - 12.50

Deadlatch Strikes Part Specify Lip Price Number Finish Description Length Each10-001 • Square corner, T-strike, box, 1 1/8” x 2 3/4”, standard $5.8010-026 • Square corner, full lip, no box, 1 5/8” x 2 1/4” 1 1/8” 6.7010-027 • 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 6.7010-058 • Circular, adjustable, 1 3/4” diameter, 605 and 626 only 1 7/32” 9.70

Deadbolt/Deadlatch Strike Combinations Combo Specify Price Number Finish Deadbolt Strike Deadlatch Strike Each10-109 • 10-094 10-001, 1 1/8” Lip $17.1010-251 • 10-064 10-001, 1 1/8” Lip 16.8010-110 • 10-094 10-026 18.0010-253 • 10-064 10-026 17.7010-111 • 10-094 10-027 18.0010-256 • 10-064 10-027 17.7010-257 • 10-092 10-027 13.7010-258 • 10-064 10-058 20.7010-259 • 10-095 10-026 13.70

Price Book 74Effective March 4, 2013 • Rev. 3/13

S200-12

S200 • PartsAdapters, Miscellaneous Parts, Screws,

Screw Packs, Torx® Screw Pack

G506-815

Adapters Part Price Number Description EachG506-815 1” Long bolt or latch housing sleeve to adapt 7/8” diameter housing to 1” bore $5.20

Miscellaneous Parts Part Price Number Description Each08-000 Interconnect assembly $79.10F506-867 Rotational stop 3.40

Screws Price Each Part Specify (Order in Number Finish Description Type Size multiples of 100)B502-998 Mounting, upper cylinder PFH Recess 10-32 x 2 1/4” $0.88C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4” 0.88 S605-289 Mounting, lower chassis PFH 8-32 x 1 1/4” 1.10S605-297 • Escutcheon (2 req.) POH 6-32 x 3/8” 1.20

Screw Packs Part Price Number Description Contents EachS306-151 Mounting screws and tailpiece (2) S605-289 (2) B502-998 $7.30

Screw Pack, Torx®

Part Specify Price Number Finish Description Contents EachC203-311 • Latch and standard strike (2 req.) (4) C503-766 (T-15) $15.30

Note: 1) Torx® screw packs are furnished with appropriate T-xx installation tool(s).

CYL-1Price Book 74Effective March 4, 2013 • Rev. 3/13

CYLINDERSIntroductionTable of ContentsSchlage Cylinder & Keyway Terminology CYL-2Cylinders CYL-3Multiple Tailpiece Cylinders CYL-4Bulk Pack Cylinders CYL-5Primus Cylinders-Sub-Assembled CYL-7A & H, AD, AL, CL, D, ND, KS, S & S200 CYL-8 Tailpieces & Actuators . . . . . . . . . . . . . . . . . CYL-14 Miscellaneous Parts . . . . . . . . . . . . . . . . . . . CYL-15B500 CYL-16 Standard Cylinders & Housings . . . . . . . . . . CYL-16 Tailpieces, Drivers & Parts . . . . . . . . . . . . . CYL-17B100, B250, B400, E/B, F100, H, MD, S200 CYL-18 Deadbolt Cylinders . . . . . . . . . . . . . . . . . . . . CYL-18 IC Cylinders & Miscellaneous Parts . . . . . . . . CYL-19 Collars, Tailpieces and Reference Tables . . CYL-20B300, BA300, F300, FA300 CYL-22 Standard Cylinders & Housings . . . . . . . . . . CYL-22 Tailpieces, Drivers & Parts . . . . . . . . . . . . . CYL-23B600/700/800 CYL-24 Reference Table . . . . . . . . . . . . . . . . . . . . . . CYL-24 Miscellaneous Parts and Tailpieces . . . . . . . CYL-26 IC Housings and Parts . . . . . . . . . . . . . . . . . CYL-27Mortise CYL-28 Standard Cylinders, L-Series . . . . . . . . . . . . CYL-28 Standard Cylinders for Adams Rite, Adams Rite, Lori & Corbin Russwin . . . . . . . CYL-29 Concealed Shell Cylinders . . . . . . . . . . . . . . CYL-30 Cams, Cam Screws, Dummy Cylinder . . . . CYL-31 Full Size Interchangeable Core . . . . . . . . . . . CYL-32 Small Format Interchangeable Core . . . . . . . CYL-34 Cylinder Lengths and Collars By Application . CYL-36Schlage cylinders for Falcon & Von Duprin CYL-39Rim Cylinders CYL-40Interchangeable Cores CYL-42 Full Size Interchangeable Cores . . . . . . . . . . CYL-42 Small Format Interchangeable Cores . . . . . CYL-43Competitor Retrofit Cylinders CYL-44 Corbin Russwin, Sargent, Yale Key-in-Knob/Lever . . . . . . . . . . . . . . . CYL-44 Reference Tables . . . . . . . . . . . . . . . . . . . . CYL-44 Corbin Russwin Master Ring . . . . . . . . . . . CYL-46 Cams to Operate Competitor Locks . . . . . CYL-47Letter/Mail Box CYL-48Special Cylinders CYL-49Pins, Springs & Pinning Components CYL-50 Full Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-50 Small Format . . . . . . . . . . . . . . . . . . . . . . . . CYL-51Plugs CYL-53Shells CYL-55

Product Identification 20-001 118 XXXX

Keyway

Dimension

Cylinder Assembly

Full Size Cylinders and CoresWhen ordering full size cylinders, specify the conventional or Primus® cylinder number, dimension (where required),keyway (e g C, CP, C123, S123 etc ) or keyway family (e g Obverse, Everest® C Family, Everest D Family, Everest 29™ T) and finish. If no keyway is specified, master keyed products will default to Everest 29 S145 and non-master keyed products will default to C123.

Small Format Interchangeable CoresSmall format cores are available only in Everest and Everest 29 restricted keyways and certain Best® keyways. Small format cores cannot be keyed into the same system as full size cylinders and cores because the keyways are different.

See Schlage Cylinder & Keyway Terminology for more details on Schlage’s terminology.

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US11) Aged Bronze

Standard Features*Certification BHMA certified to ANSI A156.5, 2001, Grade 1 OperationalKey Patents Primus XP keys are protected against unauthorized duplication by U S utility patents 7 159 424 Everest

and Everest Primus XP keys are protected by U S utility patents 5,715,717 and 5,809,816 and by U S design patents 428,324 and 426,452. Everest 29 and Everest 29 Primus XP keys are protected by U S patent US 7,665,337

Standard Solid Brass 6 pin plugs and shells. Mortise and Rim cylinders utilize a two piece Stainless Steel Cylinder sintered housing secured by 2 Torx® screws. Standard keyway is Everest 29 S123, furnished Keyed Different (KD) with two 6 pin nickel silver keys (except F series knobs and levers). Mortise cylinder standard lengths are 1 1/8” for conventional cylinders, 1 1/2” for large format interchangeable core and 1 3/8” for small format interchangeable core.SFIC Everest 29 R and Everest B combinated cores includes 2 change keys.FSIC Full size conventional cores are furnished 1-bitted. Primus cores are furnished 0-bitted. Small format cores are available either uncombinated or combinated. Control keys must be ordered separately.Primus Primus XP cylinders are furnished MK, KA, KD, or Less Key Blank (LKB). See Terms & Conditions: Primus Sales Policy for additional details.

* Cylinders are furnished with standard features unless otherwise specified

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-2

CYLINDERS • Schlage Cylinder & Keyway Terminology

KeywaysEverest 29

Cylinders and keys which incorporate all new keyways with the patented undercut groove on the right side of the key section. S Family is the name of the open family of keyways, R Family

(for SFIC) and T Family keyways are restricted.

ClassicSchlage pin tumbler keyways which existed before Everest keyways. Obverse is the name of the open family of keyways (C, E, etc.) and there are three other families of restricted keyways: Reverse, Numbered and Quad.

OpposingTerms

Cylinder MechanismsPrimus XP Cylinders

Schlage’s high security sidebar cylinder mechanism. Patented key control, geographical exclusivity, and pick resistance are

standard. UL437 drill resistance is optional. Primus keys operate conventional cylinders.

Conventional CylindersNormal, standard cylinders.Opposing

Terms

Key ControlRestricted Keyways

Special non-stock keyways set aside for limited use and a higher degree of key control. A letter of authorization from the end user

is required to process orders for keys, blanks and cylinders.

Open KeywaysStandard keyways available without any ordering formali-ties. C Family (Everest Conventional) and Obverse (Classic Conventional) keyways are open. All others are restricted.

OpposingTerms

Cylinder CategorySmall Format Interchangeable Core (SFIC)

A core completely interchangeable with Best, Falcon, etc. No Primus version exists. Pins, springs, keys and keyways are

based on a plug diameter smaller than the standard 1/2”.

Full SizePertaining to cylinders (including interchangeable cores), keys and keyways based on the industry standard plug diameter of about 1/2”.

OpposingTerms

Everest 29™ Keyway Everest Keyway Classic Keyway

• • • Patented until 2029

• • Patented until 2024

• • Patented until 2014

• • • • • • • • • Commercial Applications

• • • • • • Maximum Key Duplication Restrictions

• • • Some Key Duplication Restrictions

• No Key Duplication Restrictions

• • SFIC Available

• • Check Pin

• • • • • • Finger Pins/Side Bar Configuration

• • • #7 finger pin used for added security

• • • • • • • • • Bulk Pack Available

• • • • • • • Master keying available for all Levels

• Master keying available for Levels 1+, 2 , 3 and 4

• Master keying available for Levels 2, 3 and 4

RR

RR RR

CYL-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Modular Key-In-Knob Cylinder

Modular Rim Cylinder

Modular Mortise Cylinder

1³⁄₈"

1¹⁄₂"

1⁵⁄₈"

1³⁄₄"

1¹⁄₈" housing

1¹⁄₄"

Plug ExtensionB590-299

Plug ExtensionB590-298

CamL583-474 orL583-475

CamL583-474 or L583-475

CamL583-474 or L583-475

Cam Screw, 1”B520-692

Cam Screw, ³⁄₄”B520-691

Cam Screw, ¹⁄₂”B520-690

B520-726 1³⁄₄” L583-475 B520-692 B590-299

CYLINDERS

Modular Rim Cylinder Parts Housing Tailpiece DriverB520-727 B502-899 B502-310

Modular Housing Interchangeability Housing Cam Cam Screw Plug Extenson Part Size

Part Number

Number B520-721 1-1/8” L583-474 B520-690 –B520-722 1-1/4” L583-475 B520-690 –B520-723 1-3/8” L583-474 B520-691 B590-298B520-724 1-1/2” L583-475 B520-691 B590-298B520-725 1-5/8” L583-474 B520-692 B590-299B520-726 1-3/4” L583-475 B520-692 B590-299

Modular Key-In-Knob Cylinder

Modular Rim Cylinder

Modular Mortise Cylinder

1³⁄₈"

1¹⁄₂"

1⁵⁄₈"

1³⁄₄"

1¹⁄₈" housing

1¹⁄₄"

Plug ExtensionB590-299

Plug ExtensionB590-298

CamL583-474 orL583-475

CamL583-474 or L583-475

CamL583-474 or L583-475

Cam Screw, 1”B520-692

Cam Screw, ³⁄₄”B520-691

Cam Screw, ¹⁄₂”B520-690

B520-726 1³⁄₄” L583-475 B520-692 B590-299

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-4

Reduce Cylinder InventoryMultiple tailpiece cylinders allow high inventory flexibility with low investment. Included with each cylinder are tailpieces to suit these locks:

• A-Series (all designs) • AL-Series • D-Series Knobs • D-Series Levers • H-Series Knobs (all designs) • ND-Series Levers

Cylinders are furnished 0-bitted. Conventional cylinders are furnished with two (2) blank keys.

Multiple Tailpiece Key-in-Knob/Lever Cylinders Part Price Keyway Contents Number Each (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 $48.00 (1) A301-338 tailpiece, A & H-Series Orbit All Keyways Everest®, (1) A700-031 tailpiece, A, AL, H-Series (except Orbit) Everest 29™ and Classic (1) C603-524 tailpiece, D-Series Knobs Families (1) N523-022 tailpiece, ND-Series Levers (black) (2) C503-115 cap pin springs (2) C503-116 cap pins (2) Key Blanks 35-009 (Everest C) OR 35-002 (Everest D) OR 35-270 (Everest 29 S) OR 35-268 (Everest 29 T) (1) Pre-assembled cylinder 0-bitted, less tailpiece LESS keys (1) A301-338 tailpiece, A & H-Series Orbit 40-700* / 40-700-XP 105.00 Primus® / Primus XP (1) A700-031 tailpiece, AL-Series Controlled Access All Keyways (1) C603-524 tailpiece, D-Series Knobs (Classic, Everest and (1) N523-022 tailpiece, ND-Series Levers (black) 40-500* / 40-500-XP Everest 29) (2) C503-115 cap pin springs UL437 Listed 129.00 (2) C503-116 cap pins

Notes: 1) Specify keyway and finish: 606 or 626. 2) Cylinders are only available 0-bitted. 3) Multiple tailpiece cylinders are not available for hotel function locks. 4) For Everest D family and restricted keyways (Quad, Numbered, and reversed) add $10.40 per cylinder. This does not apply to Primus. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

* Primus key blanks must be ordered separately.

CYLINDERS • Multiple Tailpiece Key-in Knob/Lever

CYL-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Key-in-Knob/LeverInterchangeable Cores Bulk Pack • CYLINDERS

Key Large Jobs Faster!Bulk Packs are kits that contain all of the components needed to build 10 cylinders. For added convenience the shells are pre-loaded with pins and springs and slid onto a follower. Cams and tailpieces are sold separately in economical 10-packs to maximize flexibility. Keys and Primus components are also sold separately.The unit price of the unassembled cylinder is up to 15% less than buying it completelyassembled. In addition to this savings, labor time is reduced since cylinders don’thave to be taken apart before being pinned in the field.

09-764*Everest® Primus® and Everest 29™

Primus Bulk Pack

(Includes 10 of each item shown)

Notes: 1) Specify finish, keyway, and 118 or 114 length. 2) Order cam and collar 10-packs separately. See below. 3) Bulk pack cylinders are not available for hotel function locks. 4) Key blanks must be ordered separately. 5) For Everest D family and restricted keyways (Quad, Numbered, and reversed) add $10.40 per cylinder. This does not apply to Primus. 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

10-Piece Bulk Pack Key-in-Knob/Lever Cylinders

Contents (10 each)Cylinder

MechanismKeyway

TypeBulk Pack Number

Price EachPack

ConventionalClassic 09-409 $365.00

Everest and Everest 29 Family 09-751 365.00

Primus/Primus XP

Everest and Everest 29 09-764 722.00

Primus/Primus XP Classic 09-833 722.00

10-Piece Bulk Pack Mortise Cylinders

Contents (10 each)Cylinder

MechanismKeyway

TypeBulk Pack Number

Price EachPack

ConventionalClassic 09-412 $410.00

Everest and Everest 29 Family 09-754 410.00

Primus/Primus XP Everest and Everest 29 09-767 790.00

Primus/Primus XP Classic 09-835 790.00

10-Piece Bulk Pack Rim Cylinders

Contents (10 each)Cylinder

MechanismKeyway

TypeBulk Pack Number

Price EachPack

ConventionalClassic 09-410 $423.00

Everest and Everest 29 Family 09-752 423.00

Primus/Primus XP Everest and Everest 29 09-765 818.00

Primus/Primus XP Classic 09-834 818.00

10-Piece Bulk Pack Interchangeable Cores

Contents (10 each)Cylinder

MechanismKeyway

TypeBulk Pack Number

Price EachPack

ConventionalClassic 09-411 $441.00

Everest and Everest 29 Family 09-753 441.00

Primus/Primus XP Everest and Everest 29 09-766 864.00

Primus/Primus XP Classic 09-836 864.00

Loaded shells Cap pins Check pinsPlugs Cap pin springs (Everest and Everest 29 Caps conventional only)

Check pin springs (Everest and Everest 29 conventional only)

Loaded shells Check pins (Everest and Everest 29Plugs conventional only) Cam Screws Check pin springs (Everest and Everest 29 conventional only)

Loaded shells DriversPlugs Cap pin springs Caps Screws & back plate packsCap Pins Check pins (Everest and Collars Everest 29 conventional only) Tailpieces Check pin springs (Everest and Everest 29 conventional only)

Loaded shells Actuating ringsPlugs Actuating pins Caps Control pinsCap pins & springs Check pins (Everest and Everest 29 conventional only) Check pin springs (Everest and Everest 29 conventional only)

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-6

CYLINDERS • Bulk Pack Key-in-Knob/LeverInterchangeable Cores

Bulk Pack Modular Cylinder Cams and Collars Keyway Contents Bulk Pack Price Each Type Description (10 each) Part Number Pack Straight Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-476 09-195 $22.00 All Straight Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-477 09-196 22.00(Classic/ L-Series Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-474 09-197 22.00Everest & L-Series Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-475 09-198 22.00Primus, etc) Adam’s Rite Kit - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-446 09-199* 111.00 Adam’s Rite Kit - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-447 09-200* 114.00

* Specify finish 605, 606, 612, 613, 625 or 626, includes 10 each 36-079-037 and B220-050.

Note: 10-piece tailpiece packs are not available for hotel function cylinders.

10-Piece Tailpiece Packs for Bulk Pack Cylinders (Classic, Everest, Everest 29 & Primus) Cylinder Contents Bulk Pack Price Each Mechanism Description (10 each) Part Number Pack All Modular A-Series (except Orbit) A301-337 with C603-098 security disc 09-756 Cylinders A-Series Orbit (except A73) A301-338 09-757 (Classic, AL-Series A700-031 09-416 $10.00 Everest & D-Series Levers C604-243 09-418

Primus) D-Series Knob C603-524 09-417

ND-Series Levers N523-022 (black) 09-019

CYL-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Mortise, Rim,Primus Cylinder-Sub Bulk Pack • CYLINDERS

Primus Cylinders-Sub-AssembledPart Description PriceNumber Each20-200 Primus classic Key in Lever sub-assembled multiple tailpiece $74.00

(A & H series Orbit A301-338, AL Series A700-031, D levers and knobs C604-243, ND Series N523-022). *

20-201 Primus classic Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled multiple 78.00 cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Standard (L583-446 or L583-447)*

20-202 Primus classic Rim Cylinder sub-assembled. * 78.0020-203 Primus classic FSIC sub-assembled 80.0020-204 Primus Everest and Primus Everest 29 Key in Lever sub-assembled multiple tailpiece. 74.00

(A & H series Orbit A301-338, AL Series A700-031, D levers and knobs C604-243, ND Series N523-022). *

20-205 Primus Everest and Primus Everest 29 Mortise Cylinder (1 1/4” or 1 1 /8”) sub-assembled 78.00 multiple cams-Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Standard (L583-446 or L583-447)

20-206 Primus Everest and Primus Everest 29 Rim Cylinder sub-assembled. * 78.0020-207 Primus Everest and Primus Everest 29 FSIC sub-assembled. * 80.0020-208 Primus classic UL437 Key in Lever sub-assembled multiple tailpiece. (A & H series 93.00

Orbit A301-338, AL Series A700-031, D levers and knobs C604-243, ND Series N523-022). *

20-209 Primus classic UL437 Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled. 104.00 Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Standard (L583-446 or L583-447)*

20-210 Primus classic UL 437 Rim Cylinder sub-assembled. * 104.0020-211 Primus Everest and Primus Everest 29 UL 437 Key in Lever sub-assembled. Multiple tailpiece 93.00

(A & H series Orbit A301-338, AL Series A700-031, D levers and knobs C604-243, ND Series N523-022) *

20-212 Primus Everest and Primus Everest 29 UL437 Mortise Cylinder (specify 1 ¼” or 1 1/8”) 104.00 sub assembled. Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Standard (L583-446 or L583-447)*

20-213 Primus Everest and Primus Everest 29 UL 437 Rim Cylinder sub-assembled. * 104.00

Primus Competitor Cylinders-Sub-AssembledPart Price Number Description Each20-221 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3300 C 20-219 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3400, CL3600 20-218 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CK4200 20-214 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 10 Line Levers $78.0020-215 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs 20-216 Primus, sub-assy, key-in-knob cylinder for Sargent 6 Line Except B Knob 20-220 Primus, sub-assy, key-in-knob for Yale 5300LN, 5400LN Levers 20-217 Primus, sub-assy, key-in-knob Yale 5300, 5400, 6200 Knobs 20-222 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 10 Line Levers 20-223 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs 20-224 Primus, sub-assy, key-in-knob cylinder for Sargent 6 Line Except B Knob 20-225 Primus, sub-assy, key-in-knob Yale 5300, 5400, 6200 Knobs 102.0020-228 Primus, sub-assy, key-in-knob for Yale 5300LN, 5400LN Levers 20-226 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CK4200 20-227 Primus, sub-assy, key-in-knob cylinder for Corbin RusswinCL3400, CL3600 20-229 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3300

* Please order separately: Keys, plug pins, Primus finger pins and finger pins springs, side bar and side bar springs.

Primus Classic,Everest or Everest 29

(Specify keyway)

Primus Classic, Everest or Everest 29

UL437 (Specify Keyway)

Primus Classic, Everest or Everest 29

(Specify keyway)

Primus Classic, Everest or Everest 29

UL437 (Specify Keyway)

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-8

CYLINDERS • Key-in-Knob/LeverReference Tables

A, AD, H-Series

A, HORBA, HD

Dthickdoor

All Modular Cylinder Key Families

All Modular Cylinder Key Families

ALD, ND

Faculty Restroom

AGEOPLYTULC, D

AORB

A73ORB

StandardFunctions

ALD ND

StandardFunctions

Faculty Restroom

KnobsHorizontalTailpiece

LeversVertical

Tailpiece

A & H-Series Knob Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Tailpiece Function Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) 5-Pin Knobs Conventional Discontinued - Classic 33-005 A201-848 A508-606 Conventional 21-002 $48.00 Classic 33-137 A508-653 A301-337 Everest & Everest 29 33-138 A508-653 A301-337 Except Orbit Primus® 20-724 105.00 Classic 33-136 Primus-XP 20-724-XP Everest & Everest 29 33-119 A508-655 A301-337 Primus UL437 20-524 129.00 Classic 33-154 Primus UL437-XP 20-524-XP Everest & Everest 29 33-221 Conventional 21-002-122 48.00 Classic 33-137 A508-653 A301-338 Standard Everest & Everest 29 33-138 A508-653 A301-338 Functions Orbit Except Primus 20-724-122 105.00 Classic 33-136 A73 Primus-XP 20-724-122-XP Everest & Everest 29 33-119 A508-655 A301-338

Function Primus UL437 20-524-122 129.00 Classic 33-154

Primus UL437-XP 20-524-122-XP Everest & Everest 29 33-221 Conventional Classic 33-137 A508-653 A301-339 Everest & Everest 29 33-138 A508-653 A301-339 Primus Classic 33-136 A73 Orbit Primus-XP - Everest & Everest 29 33-119 A508-655 A301-339 Primus UL437 Classic 33-154 Primus UL437-XP Everest & Everest 29 33-221 A85, H185

Except Orbit 21-003 71.00 Classic 33-216 A508-653 A501-991*

Facility Conventional Everest & Everest 29 33-235 A508-653

Restroom Orbit 21-003-168 71.00 Classic 33-216 A508-653 A501-693* Everest & Everest 29 33-235 A508-653

Completecylinder

discontinuedbut may be

assembled inthe field.

* Requires C503-767 driver.

CYL-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Reference TablesAD-Series Key-in-Knob/Lever • CYLINDERS

AD-Series Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Tailpiece Function Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 23-013 $48.00 Classic 33-137 A508-654 C604-524 Everest & Everest 29 33-138 Primus 20-750 105.00 Classic 33-136

Everest & Everest 29 33-134 All Primus XP 20-750-XP 105.00 Classic 33-136 Everest & Everest 29 33-134 Primus UL 437 20-550 129.00 Classic 33-154 A508-655 C604-243

Everest & Everest 29 33-221 Primus UL 437 XP 20-550-XP 129.00 Classic 33-154 Everest & Everest 29 33-221 Conventional 23-118 48.00 Classic 33-137 A508-653 23538085 Everest & Everest 29 33-138 Primus 20-854 105.00 Classic 33-136 Everest & Everest 29 33-134 MS, MD All Primus XP 20-854-XP 105.00 Classic 33-136 Everest & Everest 29 33-134 Primus UL 437 20-554 129.00 Classic 33-154 A508-655 23538085 Everest & Everest 29 33-221 Primus UL 437 XP 20-554-XP 129.00 Classic 33-154 Everest & Everest 29 33-221 Conventional 23-118 48.00 Classic 33-137 A508-653 23538085 Everest & Everest 29 33-138 Primus 20-854 105.00 Classic 33-136 993R Except Everest & Everest 29 33-134 993S ATH,8AT Primus XP 20-854-XP 105.00 Classic 33-136 993M Everest & Everest 29 33-134 A508-655 23538085 Primus UL 437 20-554 129.00 Classic 33-154 Everest & Everest 29 33-221 Primus UL 437 XP 20-554-XP 129.00 Classic 33-154 Everest & Everest 29 33-221

All cylindrical

Exit (993R, 993S,

993M) with ATH, 8AT

design only

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-10

D-Series Knob Cylinder Reference Table Door Cylinder Complete Price Keyway Plug Shell Tailpiece Function Thickness Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 23-001 $48.00 Classic 33-137

A508-653 Everest & Everest 29 33-138 Standard Primus® 20-748 105.00 Classic 33-136 Primus XP 20-748-XP Everest & Everest 29 33-119 A508-655 C603-524 Primus UL437 20-548 129.00 Classic 33-154 Standard Primus XP UL437 20-548-XP Everest & Everest 29 33-221 Functions Conventional 21-002 48.00 Classic 33-137 A508-653 A301-337 Everest & Everest 29 33-138 2” –2 1/2” Primus 20-724 105.00 Classic 33-136 Primus XP 20-724-XP Everest & Everest 29 33-119 A508-655 A301-337 Primus UL437 20-524 129.00 Classic 33-154 Primus XP UL437 20-524-XP Everest & Everest 29 33-221 Standard Conventional 23-003 71.00 Classic 33-216 C604-106* D85 Faculty Everest & Everest 29 33-235 A508-653 Restroom 2” – 2 1/2” Conventional 23-003-098 71.00 Classic 33-216 C604-107* Everest & Everest 29 33-235

AL-Series Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Tailpiece Function Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 21-020 $48.00 Classic 33-137 A508-653 A700-031 Everest & Everest 29 33-138 Standard Primus 20-728 105.00 Classic 33-136 Functions All Primus-XP 20-728-XP Everest & Everest 29 33-119

A508-655 A700-031 Primus UL437 20-528 129.00 Classic 33-154 Primus UL437-XP 20-528-XP Everest & Everest 29 33-221 AL85 Faculty Conventional 21-021 71.00 Classic 33-216 A508-653 A700-023* Restroom Everest & Everest 29 33-235

CYLINDERS • Key-in-Knob/Lever Reference TablesAL, D-Series Knob

* Requires C503-767 driver.Notes: See next page.

CYL-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Reference TablesD-Series, ND-Series Key-in-Knob/Lever • CYLINDERS

D-Series Lever Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Tailpiece Function Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 23-013 $48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 Standard Primus 20-750 105.00 Classic 33-136 Functions All Primus XP 20-750-XP Everest & Everest 29 33-119

A508-655 C604-243

Primus UL437 20-550 129.00 Classic 33-154 Primus XP UL437 20-550-XP Everest & Everest 29 33-221 D85 Faculty Conventional 23-014 71.00 Classic 33-216 A508-653 C604-348* Restroom Everest & Everest 29 33-235

* Requires C503-767 driver.

ND-Series Lever Cylinder Reference Table Door Cylinder Complete Price Keyway Plug Shell Tailpiece Function Thickness Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 23-065 $48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 Standard Primus 20-765 105.00 Classic 33-136 Functions Standard Primus XP 20-765-XP Everest & Everest 29 33-119

A508-655 N523-022

Primus UL437 20-565 129.00 Classic 33-154 Primus XP UL437 20-565-XP Everest & Everest 29 33-221 ND85 Faculty

Conventional

23-000 71.00 Classic 33-216 A508-653 N523-123* Restroom Everest & Everest 29 33-235

Notes: 1) Finishes: 606 and 626. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $10.40 per cylinder or core. See Terms & Conditions for more information. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

S & S200-Series Lever Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Tailpiece Mechanism Design Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14) Conventional 21-059 $48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 Primus® Keyed Levers 20-752 105.00 Classic 33-136 Primus -XP 20-752-XP 105.00 Everest & Everest 29 33-119 A508-655

S605-231

Primus UL437 20-552 129.00 Classic 33-154 Primus UL437-XP 20-552-XP 129.00 Everest & Everest 29 33-221

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-12

CYLINDERS • Key-in-Knob/LeverReference Tables

S, S200-Series

For pins, springs, etc., see CYL-50.

Notes: 1) Finishes: 606 and 626. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Hotel function cylinders are furnished 0-bitted and emergency keys must be ordered separately. 4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) S and S200-Series cylinders require sleeve S605-192. 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

CYL-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Reference TablesCL and Portable Security Key-in-Knob/Lever • CYLINDERS

Door Drawer

CL-Series Cabinet Lock Cylinder Reference Table Cylinder Complete Price Keyway Plug Shell Actuator Application Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-15) Conventional 20-172 $48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 Primus® 20-772 105.00 Classic 33-136 Door Primus XP 20-772-XP Everest & Everest 29 33-119 A508-655 Primus UL437 20-572 129.00 Classic 33-154 Primus XP UL437 20-572-XP Everest & Everest 29 33-221 CL10-360 Conventional 20-174 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 Drawer Primus 20-774 105.00 Classic 33-136 Primus XP 20-774-XP Everest & Everest 29 33-119 A508-655 Primus UL437 20-574 129.00 Classic 33-154 Primus XP UL437 20-574-XP Everest & Everest 29 33-221

Portable Security Cylinders Cylinder Complete Price Keyway Plug Shell Actuator Series Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-15) Conventional 47-413 $48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 KS-Series* Primus 47-743 105.00 Classic 33-136 KZ32DA0 Primus XP 47-743-XP Everest & Everest 29 33-119 A508-655 Primus UL437 47-542 129.00 Classic 33-154 Primus XP UL437 47-542-XP Everest & Everest 29 33-221 Conventional 47-414 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 KC-Series Primus 47-744 105.00 Classic 33-136 KZ34DA0 Primus XP 47-744-XP Everest & Everest 29 33-119 A508-655 Primus UL437 47-543 129.00 Classic 33-154 Primus XP UL437 47-543-XP Everest & Everest 29 33-221

Note: 1) Use tailpiece CL10-361 for 7/8” -1 1/8” thickness and CL10-362 for 1 3/8” thick door or drawer. 3) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) S and S200-Series cylinders require sleeve S605-192. 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

For pins, springs, etc., see CYL-50.

KS-Series PadlocksKS-Full Size Removable Core KC-Series Cables

* For FSIC options please see page CYL-44

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-14

CYLINDERS • Key-in-Knob/LeverParts

A, AD, AL, L, D, H, ND, S, S200-Series

Tailpieces and Actuators Part Price Number Lockset Description EachA201-934 A73 Orbit Classic conventional non modular cylinders $6.90A301-337* A, H 6.30A301-338 A, H Orbit 1.30A301-339 A73 Orbit 6.90A501-693* A85,

H185 Orbit Faculty Restroom function 2.30

A501-991* A85, H185 Faculty Restroom function 2.30A508-606 A, H Classic conventional non modular 1.30A508-614 Orbit Classic conventional non modular 1.30A700-031 AL All except hotel function 1.30A700-023* AL85 Faculty Restroom function for Modular Cylinder 4.70

C604-243 D Knobs & levers,

see reference table 1.30

C604-106* D85 Knobs, hotel function 4.70C604-107* D85 Knobs, hotel function, thick door 8.10C604-348* D85 Levers, hotel function 4.80N523-022 ND Modular cylinders all keyway families 1.30

(Classic, Everest, Everest 29 & Primus)N523-023 ND Classic conventional (silver) non modular 1.30N523-123* ND85 Faculty Restroom Function 4.40S605-228 S, S200 Classic conventional non modular 2.00S605-231 S, S200 Modular cylinders all keyway families 7.30

(Classic, Everest, Everest 29 & Primus)

* Not compatible with Quad keyway cylinders manufactured before 1999.

Hotel Function Indicator Pins, Etc. Part Price Number Description EachC503-767 Driver for hotel tailpieces $1.40C603-195* Obstruction pin, Classic 1.10

C604-144 Indicator pin spring, Classic

(order in multiples of 100) 0.16

C604-362 Obstruction pin, Everest & Everest 29 1.10C604-368 Indicator pin, Everest & Everest 29 3.60

C604-369 Indicator pin spring, Everest & Everest 29 (order in multiples of 100) 0.16

C604-371 Indicator pin, Classic

(except Reverse sections) 3.80

C604-372 Indicator pin, Classic (Reverse sections) 3.80

AD Series Lock - Tailpieces Part Lever Price Number Description Keyway Style EachC603-524 All AD Cylindrical Locks - CY Classic All $1.10 AD Exit -993R, 993S, 993M non modular ATH, 8AT C604-243 All AD Cylindrical Locks Modular Cylinders all keyway families All 1.10 AD Exit - 993R, 993S, 993M (Classic, Everest, Everest 29 & Primus) ATH, 8AT23538077 All AD Mortise locks - MS, MD Classic All 1.30 AD Exit - 993R, 993S, 993M non modular Except ATH, 8AT 23538085 All AD Mortise locks - MS, MD Modular Cylinders all keyway families All 1.30 AD Exit - 993R, 993S, 993M (Classic, Everest, Everest 29 & Primus) Except ATH, 8AT

For pins, springs, etc., see CYL-50.

* Requires C503-767 driver.

Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus)

CYL-15Price Book 74Effective March 4, 2013 • Rev. 3/13

Miscellaneous Parts Complete Locks • CYLINDERS

* Subject to Specials discounting and extended factory lead time. ** KC-Series Cables accept both the KZ38BA1 and the KZ38BA2 cylinder housings.

Miscellaneous Parts Part Price Number Description EachCL10-301 CL-Series cylinder retaining screw $0.30CL10-360 CL-Series driver 1.80CL10-361 CL Series actuator, 7/8” to 1 1/8” door or drawer 1.80CL10-362 CL-Series actuator, 1 3/8” door or drawer 1.80F605-038 F Series plug retainer (order in multiples of 100) 0.16KZ32BB0 KS Padlocks-Series cylinder housing screw (order in multiples of 30) 0.92KZ32DA0 KS Padlocks-Series cylinder driver(order in multiples of 30) 2.00KZ33DC0 KC Cable-Series driver mounting screw (order in multiples of 30) 1.40KZ34CA0 KC Cable-Series cylinder cap (order in multiples of 30) 1.70KZ34ED0 KC Cable-Series cylinder cap pin (order in multiples of 30) 0.66KZ34DA0 KC Cable -Series driver (order in multiples of 30) 2.10KZ38BA1** KS Padlocks 20, 40, 70, 80, 90 and KC-Series cylinder housing 7.20

(order in multiples of 20)KZ38BA2** KS Padlock10 and KC-Series cylinder housing (order in multiples of 20) 7.20S605-192 S, S200 sleeve 1.30S605-228 S, S200 driver 2.00XA10-594* Spacer for 5-pin cyl. in 6-pin A or H-Series knob 5.50

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-16

CYLINDERS • DeadboltsB500-Series

Cylinders, Parts

B500 Series Cylinders - Single Cylinder Deadbolts Part Door Price Number Description Thickness Each22-003 Conventional 1 3/8” - 1 3/4” $48.0022-004 Conventional 1 3/4” - 2 1/4” 20-188 Primus 1 3/8” – 1 7/8” 20-188-XP Primus XP 1 3/8” – 1 7/8” 105.0020-189 Primus 1 7/8” – 2 1/4” 20-189-XP Primus XP 1 7/8” – 2 1/4” 20-190 Primus UL 1 3/8” – 1 7/8” 20-190-XP Primus XP UL 1 3/8” – 1 7/8” 129.0020-191 Primus UL 1 7/8” – 2 1/4” 20-191-XP Primus XP UL 1 7/8” – 2 1/4”

B500 Series Cylinders - Double Cylinder Deadbolts* Part Door Price Number Description Thickness Each22-645 Conventional 1 3/8” - 1 3/4” $48.0022-646 Conventional 1 3/4” - 2 1/4” 20-745 Primus 1 3/8” – 1 7/8” 20-745-XP Primus XP 1 3/8” – 1 7/8” 20-746 Primus 1 7/8” – 2 1/4” 105.0020-746-XP Primus XP 1 7/8” – 2 1/4” 20-545 Primus UL 1 3/8” – 1 7/8” 20-545-XP Primus XP UL 1 3/8” – 1 7/8” 129.0020-546 Primus UL 1 7/8” – 2 1/4” 20-546-XP Primus XP UL 1 7/8” – 2 1/4”

* Part numbers for double sided cylinders represent one cylinder only.

B500 Series Cylinders - B561 One-Way Deadbolt Part Door Price Number Description Thickness Each22-069 Conventional 1 3/8” - 2 1/4” $48.0020-071 Primus 1 3/8” - 2 1/4” 105.0020-071-XP Primus XP 1 3/8” - 2 1/4” 105.0020-072 Primus UL 1 3/8” - 2 1/4” 129.0020-072-XP Primus XP UL 1 3/8” - 2 1/4” 129.00

B500 Series Cylinder Parts Cylinder Mechanism Complete Cylinder Keyway Type Plug Shell

Conventional Classic 33-137 A508-653 Everest & Everest 29 33-138

Primus/Primus XP Classic 33-136 Everest & Everest 29 33-119

Primus UL/Primus XP UL Classic 33-154 A508-655 Everest & Everest 29 33-221

See single & double cylinder part numbers listed above

Notes: 1) Finishes: 606 and 626 only. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) For Everest D Family restricted keyways in conventional cylinders, add $10.40. See Terms & Conditions for more information. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

CYL-17Price Book 74Effective March 4, 2013 • Rev. 3/13

B500-SeriesCylinders, Parts Deadbolts • CYLINDERS

Tailpieces Part Number Description Door Thickness Price Each

Single Cylinder, B560P, B563P B520-651 1 3/8” - 1 3/4”

B520-652 <1 3/4” - 2 1/4” Single Cylinder, B560GD, B560BD, B563GD, B563BD B202-957 1 3/8” - 2 1/4” Single Cylinder, B560R, B563R B600-041 1 3/8” - 2 1/4” Single Cylinder, B561 B520-667 1 3/8” - 2 1/4”

Double Cylinder, B562P (classic non-modular) B600-045* 1 3/8” - 1 3/4”

B600-046* <1 3/4” - 2 1/4” $1.90

Double Cylinder, B562P (Everest/Primus, Classic Modular) B600-085* 1 3/8” - 1 3/4”

B600-086* <1 3/4” - 2 1/4” Double Cylinder, B562GD, B562BD B202-580* 1 3/8” - 2 1/4” Double Cylinder, B562R B600-040* 1 3/8” - 2 1/4” Keyless B580, B581 B600-041 1 3/8” - 2 1/4” Keyless B571 B520-653 1 3/8” - 2 1/4”

Miscellaneous Parts Part Price Number Description Each36-086* Collar (trim ring) $6.90B600-071 Washer 0.58B520-541 Security insert for collar 7.70B302-043* Housing, outside cylinder, conventional 23.90B520-648 Housing, inside cylinder, conventional 23.90B600-092* Inside snap-on faceplate only, for all non-IC double cylinder deadlocks 1.90

B500 Series IC Housings Part Price Cylinder Type Housing Number* Door Thickness EachSingle Cylinder, Small Format Interchangeable Core Outside B610-204 1 3/8” - 2 1/4” $39.50Single Cylinder, Full Size Interchangeable Core Outside B610-203 1 3/8” - 2 1/4” 34.50

Double Cylinder, Small Format Interchangeable Core Outside B610-204 1 3/8” - 2 1/4” 39.50

Inside B610-281** 1 3/8” - 2 1/4” 39.50

Double Cylinder, Full Size Interchangeable Core Outside B610-205 1 3/8” - 2 1/4” 34.50

Inside B610-028** 1 3/8” - 2 1/4” 34.50

* Order two of each for double cylinder deadbolts

* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e

* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e ** Inside housing does not include snap-on faceplate

Notes: 1) SFIC housings do not include tailpieces. 2) For cores see Interchangeable Cores. 3) For construction cores, see Keys & Keying: Construction Core Program. 4) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.

* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e

Miscellaneous Parts for B500 Series IC Cylinders Part Price Number Description EachB600-029 Driver, B560/562J $3.80B610-032 Cotter pin for tailpiece, B560/562J (1 = pack of 50) 32.80B600-106 Driver, SFIC 12.30B600-107 Throw member, SFIC 2.20B600-108 Waldes retaining ring, B560/562BD (multiples of 100) 0.20B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks 6.90B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks 7.40B610-040 Tailpiece and cotter pin, B562J 10.70B610-041 Tailpiece and cotter pin, B560J 10.50

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-18

CYLINDERS • DeadboltsB100, B250, B400, E/B,

H, MD, S200-Series

Cylinders Only, B100, B250, B400 E/B, H, MD and S200-Series (S200 ordered before Feb, 2008) Description Part Number Price Each5-Pin C, CE, E, F only 22-001 $48.006-Pin Conventional 22-002 48.00Primus® 20-729* 105.00Primus XP 20-729-XP 105.00Primus UL437 20-529* 129.00Primus XP UL437 20-529-XP 129.00

Cylinders S200-Series (For Locks after Feb 26, 2008) Description Part Number Price Each6-Pin Conventional 22-081 $48.00Primus® 24-769 105.00Primus XP 24-769-XP 105.00Primus UL437 24-569 129.00Primus XP UL437 24-569-XP 129.00

Cylinders & Housings, S200-Series (For Locks after Feb 26, 2008) Description Part Number Price Each6-Pin Conventional 22-082 $69.00Primus® 24-770 132.00Primus XP 24-770-XP 132.00Primus UL437 24-570 157.00Primus XP UL437 24-570-XP 157.00Housing Only B202-824 20.60

Cylinder Only

Notes: 1) Finishes: 606 and 626. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information.

* Must be used in locks with universal housings (B202-824 or B202-825).

5-Pin Cylinder Retaining Screw Location

UniversalHousing(steel)

6-Pin Cylinder Retaining Screw Location

UniversalHousing(steel)

Housings With and Without Cylinders (S200 ordered before Feb, 2008) Price Series Housing Description Outside Inside Each 5-Pin C, CE, E, F 22-017 22-018 $69.00 B250, B400, E/B (Primus 6-Pin Conventional 22-019 22-020 69.00only), H (except H160), Primus 20-730 20-731 132.00S200 Universal (steel) Primus XP 20-730-XP 20-731-XP 132.00 Primus UL437 20-530 20-531 157.00 Primus UL437 XP 20-530-XP 20-531-XP 157.00 Housing only B202-824 B202-825 20.60

Notes: 5) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings. Cylinders available 606 and 626 only. 6) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 7) Certain functions of H and S200-Series locksets require a key-in-knob/lever cylinder as well. 8) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 9) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $10.40 per cylinder or core. See Terms & Conditions for more information. 10) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Cylinder Retaining Screw Part Number Description Price EachB520-298 Retaining screw for all models above $0.58

Single Cylinder Double Cylinder

CYL-19Price Book 74Effective March 4, 2013 • Rev. 3/13

B250, H, S200-SeriesFull Size Interchangeable Core Deadbolts • CYLINDERS

Miscellaneous S200-Series (For Locks after after Feb 26, 2008) Part Number Description Price Each36-086* Collar (Trim ring) $6.90B520-541 Security insert for collar 7.70B600-029 Driver 3.80B600-032 Cotter Pin (order in multiples of 100) 0.36B600-041 Tailpiece (IC) 1.90B520-685 Tailpiece 1.90B600-071 Washer 0.58

Low, 10-32 Bolts

Full Size IC

B250, H and S200-Series Interchangeable Core Cylinders Part Price Series Core Mechanism Side Number Each B250, H, S200 Housing Less Core Outside 22-061 51.00 Inside 22-062

Notes: 1) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 5) Control keys are not furnished with IC cylinders and must be ordered separately. 6) For construction cores, see Keys & Keying: Construction Core Program. 7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended. 8) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Miscellaneous Parts for B250 Style IC Cylinders Part Price Number Description Each36-086* Collar (trim ring) $6.90B520-235 Driver 3.60B520-240 Waldes retainer (order in multiples of 100) 0.36B520-541 Security insert for collar 7.70

* Specify finish: 605, 609, 612, 613, 625, 626.

For cores,see CYL-42

Cylinders S200-Series (For Locks after Feb 26, 2008) Description Part Number Price EachHousing Less Core S306-135 $52.00

10-32 Bolts,Angled Driver

1/4-28 Bolts

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-20

CYLINDERS • DeadboltsB100, B250, B450, E/B, H, MD, S200-Series

Collars and Tailpieces

Collars (Trim Rings and Security Inserts), B100, B250, B400, E/B,H, MD and S200-Series Part Number Specify Finish Description Price Each02-037 • MD160 Series decorative cylinder rose, specify design $7.7036-066 • Trim ring, 1/8” 6.6036-067 • Trim ring, 7/16” 9.1036-068 Security insert, 1/8” 4.1036-069 Security insert, 7/16” 8.0036-070 Security insert pack, 36-068 1/8” and 36-069 7/16” 12.2036-071 • Trim ring and security insert pack, 36-066 and 36-068 1/8” 10.6036-072 • Trim ring and security insert pack, 36-067 and 36-069 7/16” 17.00B520-541* Security insert, 1” for interchangeable core 7.7036-085 • Trim ring and security insert pack, B520-541 and 36-086 1” 19.6036-086 • Trim ring, 1” 6.90

Lazy Tailpieces, B100, B250, B400, E/B, H, MD and S200-Series Part Number Description Price Each Part Number Description Price EachB202-267 Single cylinder 1.180” $1.70 B220-036 Double cylinder 1.375” $5.10B202-269 Double cylinder 0.810” 1.70 B502-999 S200 2.500” 2.70B202-369 Double cylinder 0.685” 1.70 B520-236 Double cylinder 1.325” 3.70B202-370 Double cylinder 0.550” 1.70 B520-237 Double cylinder 1.100” 3.70B202-453 Double cylinder 0.622” 6.20 B520-242 Single cylinder 2.200” 8.80B202-557 Single cylinder 1.850” 1.70 B520-243 Single cylinder 2.600” 8.80B202-558 Single cylinder 2.000” 1.70 B590-443 Single cylinder 1.470” 1.90B202-580 Double cylinder 0.450” 1.90 E205-204 Single cylinder 3” breakoff 6.20B202-957 Single cylinder 1.410” 1.90 G570-159 H160 2.250” 8.90B220-032 Double cylinder 1.031” 1.70 G570-160 H160 2.500” 6.20

Drivers for Lazy TailpiecesPart Number Description Price EachB520-375 Classic Non Modular $1.90B502-949 Modular Cylinder All Keyway Families (Classic, Everest, Everest 29 & Primus) 1.10

Tailpieces and Collars Application Chart, B100, B250, B400, E/B, H, MD and S200-Series Tailpiece Function Cylinder Door Thickness (See Above) Collar(s) 5-Pin 1 3/8” – 1 3/4” B202-557

B160, F160 (discontinued) 1 13/16” – 2 1/4” B202-558 1” 6-Pin 1 5/8” – 1 3/4” B202-557 1 13/16” – 2 1/4” B202-558 5-Pin 1 5/16” – 1 5/8” B202-269 1 5/8” – 1 13/16” B220-032 B162, F162 (discontinued) 1 5/8” – 1 11/16” B202-269 1” 6-Pin 1 11/16” – 2” B220-032 2” – 2 1/4” B220-036B180 (discontinued) — 1 3/8” – 2 1/4” B590-443 1”

* B520-541 was 36-084

CYL-21Price Book 74Effective March 4, 2013 • Rev. 3/13

B100, B250, B450, E/B, F100, H, MD, S200-SeriesTailpiece and Collar Application Chart Deadbolts • CYLINDERS

Tailpieces and Collars Application Chart, B100, B250, B400, E/B,F100, H, MD and S200-Series (Continued) Tailpiece Collar(s) Model/Function Cylinder Door Thickness (See CYL-20) (See CYL-20) 1 5/16” – 1 5/8” B202-558 7/16” + 1/8” 5-Pin 1 11/16” – 2 1/4” B202-558 7/16” over 2 1/4” – 2 9/16” B202-558 1/8” 1 5/16” – 1 3/8” B202-558 Two 1/8” & One 7/16” 1 7/16” – 1 15/16” B202-558 7/16” + 1/8”B250 6-Pin 2” – 2 3/8” B202-558 7/16”B460 (discontinued) over 2 3/8” – 2 9/16” E205-204 7/16” 2 5/8” – 2 3/4” B202-558 1/8” 1 5/16” – 1 1/2” B520-242 1” + 1/8” over 1 1/2” – 2 1/8” B520-242 1” IC over 2 1/8” – 2 3/8” B520-243 over 2 3/8” – 2 5/8” B520-243 7/16” + 1/8” over 2 5/8” – 3 1/8” B520-242 7/16B251 (discontinued) N/A – B202-267 — 1 5/16” – 1 3/8” B202-370 7/16” + 1/8” 1 1/2” – 1 5/8” B202-269 5-Pin 1 11/16” – 1 15/16” B202-580 7/16” 2” – 2 3/8” B202-269 2 7/16” – 2 11/16” B202-453 1/8” 2 3/4” – 2 7/8” B202-269 1 3/16” – 1 3/8” B202-269 Two 1/8” 1 7/16” – 1 1/2” B202-370 7/16” + 1/8”B252 1 9/16” – 1 15/16” B202-369B462 (discontinued) 6-Pin 2” – 2 3/16” B202-370 7/16” 2 1/4” – 2 11/16” B202-269 2 3/4” – 2 13/16” B202-370 1/8” 2 7/8” – 3 1/8” B202-369 1 5/16” – 1 5/8” B520-237 1” + 1/8” over 1 5/8” – 1 7/8” B520-237 1” IC over 1 7/8” – 2 1/8” B520-236 1” over 2 1/8” – 2 3/8” B520-236 7/16” + 1/8” over 2 5/8” – 3 1/8” B520-236 7/16”B460N, E(B)51N, EB52N lower 6-Pin 1 3/4 – 2 1/4” E205-204 (by design)(discontinued)B462N, 1 3/4” B202-369 EB52N upper, 6-Pin 2” B202-269 (by design)inside (discontinued) 2 1/4” B220-032B462N, 1 3/4” B202-370 EB52N upper, 6-Pin 2” B202-369 (by design)outside (discontinued) 2 1/4” B202-269 5-Pin 1 3/8” 7/16” + 1/8” 1 3/4” B202-558 7/16”H except H160 6-Pin 1 3/8” 7/16” + two 1/8” 1 3/4” 7/16” + 1/8” IC 1 3/8” B520-242 1” + 1/8” 1 3/4” 1”

H160 (discontinued) 6-Pin 1 3/4” G570-159 7/16” 2” G570-160MD160 (discontinued) 5-Pin 1 5/8” – 2” B202-957 02-037 MD162 (discontinued) B202-269 6-Pin 1 3/8” – 1 5/8” B502-999 1” + 1/8”

S200 (for locks ordered before 1 5/8” – 2” 1” February 2008) IC 1 3/8” – 1 5/8” B520-242 1” + 1/8” 1 5/8” – 2” B520-243 1”

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-22

CYLINDERS • DeadboltsB300, BA300, F300, FA300-Series

Complete Cylinders

B360/F360 Cylinder and Parts

B362/F362 Cylinders and Parts

Friction insert

Cylinders

Cylinder retaining screw (2)

Inside cylinder housing

(Position varies for 5 or 6-pin cylinder.)

Crank and pin

Outside cylinder housing

Outside cylinder housing

Friction insert

Cylinder

Cylinder retaining screw

Crank and pin

(Position varies for 5 or 6-pin cylinder.)

Crank Retainer

Crank Retainer

B360/F360 Cylinder and Parts

B362/F362 Cylinders and Parts

Friction insert

Cylinders

Cylinder retaining screw (2)

Inside cylinder housing

(Position varies for 5 or 6-pin cylinder.)

Crank and pin

Outside cylinder housing

Outside cylinder housing

Friction insert

Cylinder

Cylinder retaining screw

Crank and pin

(Position varies for 5 or 6-pin cylinder.)

Crank Retainer

Crank Retainer

Cylinders Only, B300, F300 and BA300, FA300 Series Door Part Price Function Pins Thickness Number Each B360 5-Pin 1 3/8” – 1 3/4” 23-037 $37.00 B360, F360 6-Pin 1 5/8” – 2” 23-038 37.00 BA360, FA360 5-Pin 1 3/8” – 1 3/4” 23-045 37.00 B362 5-Pin 1 3/8” – 1 3/4” 23-039 74.00 (Matching Pair) 23-040 B362, F362 6-Pin 1 5/8” – 2” 23-041 74.00 (Matching Pair) 23-042 BA362, FA362 5-Pin 1 3/8” – 1 3/4” 25-019 74.00 (Matching Pair) F393 Dummy Cylinder & Housing N/A 1 5/8” – 2” B302-430 34.00 FA393 Dummy Cylinder & Housing N/A 1 5/8” – 2” F306-139 34.00

Notes: 1) Finishes: 606 and 626 only. 2) Not available in Primus® or Everest®.

Note: 3) Finishes: 505, 605, 609, 613, 619, 620, 625 and 626.

Cylinder Housings, B300 and F300-Series Part Price Number Description EachB302-020 Outside, B360, B362 B302-220 Inside, B362, F362 $12.20B302-420 Outside, F360, F362

B360/F360 Cylinder and PartsBA360/FA360 Cylinder and Parts

B362/F362 Cylinder and PartsBA362/FA362 Cylinder and Parts

CYL-23Price Book 74Effective March 4, 2013 • Rev. 3/13

B300, F300, BA300, FA300-SeriesParts Deadbolts • CYLINDERS

Tailpieces and Drivers, B300, F300, BA300, FA300-Series Part Description Price Number Function Door Thickness Length Each Tailpieces

B300-111 B360 5-Pin: 1 3/8” – 2” 1.895” B360, F360 6-Pin: 1 5/8” – 2 1/4”

B300-210 B362, BA362, FA362 outside 5-Pin: 1 3/8” – 1 3/4” 0.970” $4.20

B362, F362, outside 6-Pin: 1 5/8” – 2”

B300-211 B362, BA360, FA360 outside 5-Pin: over 1 3/4” – 2” 1.470”

6-Pin: over 2” – 2 1/4”Drivers

B300-203 B362, BA362, FA362 inside 5-Pin: 1 3/8” – 2” 0.509” $1.40 B362, F362 inside 6-Pin: 1 5/8” – 2 1/4”

Miscellaneous Cylinder Parts, B300, BA300, F300 and FA300-Series Part Price Number Description EachB300-108 Cylinder retainer screw $1.00B500-306 Crank spacer for thick doors, B360, B362 (new style) B300-118 Friction insert, outside housing, B360, B362, F360, F362, BA360, BA362. FA360, FA362B300-120 Crank Spring, BA360, BA362, FA360, FA362 0.90B300-130 Washer, cylinder bar, B360, B362, F360, F362, BA360, BA362, FA360, FA362 B500-304 Crank retainer, B360, F360 (new style)B500-305 Crank retainer, B362, F362, BA362, FA362 (new style)B302-001 Crank and pin, B360, F360 4.60B302-002 Crank and pin, B362, F362, BA360, BA362, FA360, FA362 5.00

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-24

CYLINDERS • Deadbolts B600/700/800-SeriesNon-IC Reference Table

Single Cylinder Double Cylinder

B600/700/800-Series Cylinder Reference Table Cylinder Less Plug Shell Cylinder Door Housing Price Keyway (See (See Tailpiece Mechanism Function Thickness Each Type CYL-55) CYL-57) (See CYL-26) B660, B663 1 3/8” – 2 1/2” 22-644 Classic 33-167 B610-084 Everest & Everest 29 33-138 1 3/8” – 2” 22-642 Classic 33-167 B610-082

B661, B664 Everest & Everest 29 33-138

B600-Series 2” – 2 1/2” 22-643 $48.00 Classic 33-167 A508-653 B610-083 Conventional Everest & Everest 29 33-138 1 3/8” – 2” 22-085 Classic 33-167 B610-085 B662 Everest & Everest 29 33-138 2” – 2 1/2” 22-086 Classic 33-167 B610-086 Everest & Everest 29 33-138 B760, B763 1 3/8” – 2 1/2” 20-744 Classic 33-136 B610-084 Everest & Everest 29 33-119 1 3/8” – 2” 20-742 Classic 33-136 B610-082

B761, B764 Everest & Everest 29 33-119

B700-Series 2” – 2 1/2” 20-743 Classic 33-136 A508-655 B610-083 Primus® Everest & Everest 29 33-119

1 3/8” – 2” 20-745 Classic 33-136 B610-085

B762

Everest & Everest 29 33-119 2” – 2 1/2” 20-746 Classic 33-136 B610-086 105.00 Everest & Everest 29 33-119

B760-XP, 1 3/8” – 2 1/2” 20-744-XP Classic 33-136 B610-084 B763-XP Everest & Everest 29 33-119 1 3/8” – 2” 20-742-XP Classic 33-136 B610-082 B761-XP, Everest & Everest 29 33-119 B700-Series B764-XP 2” – 2 1/2” 20-743-XP Classic 33-136 A508-655 B610-083 Primus-XP Everest & Everest 29 33-119

1 3/8” – 2” 20-745-XP Classic 33-136 B610-085

B762-XP

Everest & Everest 29 33-119 2” – 2 1/2” 20-746-XP Classic 33-136 B610-086 Everest & Everest 29 33-119

CYL-25Price Book 74Effective March 4, 2013 • Rev. 3/13

B600/700/800-SeriesNon-IC Reference Table Deadbolts • CYLINDERS

Notes: 1) Finishes: 606 and 626 only. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $10.40 per cylinder or core. See Terms & Conditions for more information. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

B600/700/800-Series Cylinder Reference Table (continued) Cylinder Plug Shell Cylinder Door Less Price Keyway (See (See Tailpiece Mechanism Function Thickness Housing Each Type CYL-55) CYL-57) (See CYL-26)

B860, B863 1 3/8” – 2 1/2” 20-544 Classic 33-154 B610-084 Everest & Everest 29 33-221 1 3/8” – 2” 20-542 Classic 33-154 B610-082

B861, B864 Everest & Everest 29 33-221

B800-Series 2” – 2 1/2” 20-543 Classic 33-154 A508-655 B610-083 Primus UL437 Everest & Everest 29 33-221 1 3/8” – 2” 20-545 Classic 33-154 B610-085

B862 Everest & Everest 29 33-221

2” – 2 1/2” 20-546 Classic 33-154 B610-086 $129.00 Everest & Everest 29 33-221

B860-XP, 1 3/8” – 2 1/2” 20-544-XP Classic 33-154 B610-084 B863-XP Everest & Everest 29 33-221 1 3/8” – 2” 20-542-XP Classic 33-154 B610-082 B861-XP, Everest & Everest 29 33-221 B800-Series B864-XP 2” – 2 1/2” 20-543-XP Classic 33-154 A508-655 B610-083 Primus-XP UL437 Everest & Everest 29 33-221 1 3/8” – 2” 20-545-XP Classic 33-154 B610-085

B862-XP Everest & Everest 29 33-221

2” – 2 1/2” 20-546-XP Classic 33-154 B610-086 Everest & Everest 29 33-221

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-26

CYLINDERS • DeadboltsB600/700/800-Series

Non-IC Cylinders, Parts and Tailpieces

Miscellaneous Parts, B600/700/800-Series Part Price Number Description EachB520-298 Cylinder retaining screw $0.58B600-015* 7/8” Collar (trim ring) for 1 5/8” – 2 1/2” door (standard) 45.20B600-016* 1 1/8” Collar (trim ring) for 1 3/8” – 1 5/8” door 48.10B600-090* Housing, inside 23.70B600-092* Inside snap-on face plate 1.90B610-024* Dummy cylinder faceplate and outside housing 37.30B610-025* Housing, outside 23.70B610-071 Washer 0.58C603-098 Security disc (Order in multiples of 100) 0.22

* Specify finish: 605, 609, 612, 613, 625 and 626.

Tailpiece and Retainer Packs, B600/700/800-Series Part Price Number Description EachB610-041 B680 (non-keyed) $10.50B610-042 B661, B664 Classic Conventional Non Modular 5.40B610-043 B661, B664 Classic Conventional thick door Non Modular 5.40B610-044 B660, B663 Classic Conventional Non Modular 5.40B610-045 B662 Classic Conventional Non Modular 7.20B610-046 B662 Classic Conventional thick door Non Modular 7.20B610-082 B661, B664 Classic Conventional Modular 5.00B610-083 B661, B664 Classic Conventional thick door Modular 6.00B610-084 B660, B663 Classic Conventional Modular 9.90B610-085 B662 Classic Conventional Modular 9.90B610-086 B662 Classic Conventional thick door Modular 9.90

Note: 1) For interchangeable core tailpieces see CYL-27.

* See reference table on CYL-24 and CYL-25.

For pins, springs, etc.,see CYL-50.

CYL-27Price Book 74Effective March 4, 2013 • Rev. 3/13

B600/700/800-SeriesIC Housings and Parts Deadbolts • CYLINDERS

1/4-28 Bolts,�Angled Driver�

1/4-28 Bolts�

Full Size IC

Small Format IC

Notes: 1) SFIC housings do not include tailpieces. 2) For cores see Interchangeable Cores. 3) For construction cores, see Keys & Keying: Construction Core Program. 4) Conventional full size cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.

B600/700-Series IC Housings Less Core Part Price Cylinder Type Housing Number Each Full Size Outside B661 B610-203*†

Interchangeable Core

Outside B662 B610-205 † $44.80 Inside B610-028 Small Format Outside B610-204*† 42.90 Interchangeable Core Inside B610-281

* Specify finish: 605, 609, 612, 613, 625, 626. † For deadbolts purchased before 10/01/2012, also requires firecups B520-657.

* Specify finish: 605, 609, 612, 613, 625, 626.

Miscellaneous Parts for B600/700-Series IC Cylinders Part Price Number Description EachB202-370 Tailpiece, B662BD $1.70B202-453 Tailpiece, B662BD thick door 6.20B202-557 Tailpiece, B660BD 1.70B220-032 Tailpiece, B661BD 1.70B600-016* 1 1/8” Collar, B600 all IC models 48.10B520-240 Waldes retaining ring B662J (order in multiples of 100) 0.36B600-029 Driver, B660/662J/663J 3.80B610-032 Cotter pin for tailpiece, B660/662J/663J (1 = pack of 50) 32.80B600-106 Driver, SFIC 12.30B600-107 Throw member for SFIC models 2.20B600-108 Waldes retaining ring B660/662BD (order in multiples of 100) 0.20B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks 6.90B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks 7.40B610-040 Tailpiece and cotter pin, B662J 10.70B610-041 Tailpiece and cotter pin, B660J, B661J, B663J 10.50

For pins, springs, etc.,see CYL-50.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-28

CYLINDERS • MortiseStandard Cylinders

for L-Series Locks, Exit Devices

Cylinder Only Cylinder with Compression Ring & Spring

Mortise Cylinders Complete Price Cam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside) Conventional 30-021 $53.00 Cylinder Only: Primus Controlled Access 20-793 112.00 L & N Primus XP Controlled Access 20-793-XP 112.00

Escutcheons Primus UL437 20-593 142.00

Primus XP UL437 20-593-XP 142.00 Hotel Function (conventional) 30-022* 84.00 Conventional 30-001 60.00 Cylinder With Primus Controlled Access 20-787 120.00 Compression Primus XP Controlled Access 20-787-XP 120.00 Ring & Spring: Primus UL437 20-587 139.00 Rose Trim Primus XP UL437 20-587-XP 139.00 Primus Lockout 20-717 157.00 Primus XP Lockout 20-717-XP 157.00 Primus UL437 Lockout 20-517 171.00 Primus XP UL437 Lockout 20-517-XP 171.00 Hotel Function (conventional) 30-002* 90.00Schlage L9060 Outside and Other Straight Cam Applications Cylinder Only: Conventional 26-021 $53.00 L & N Primus Controlled Access 20-701 112.00 Escutcheons Primus XP Controlled Access 20-701-XP 112.00 Primus UL437 20-501 142.00 Primus XP UL437 20-501-XP 142.00 Conventional 20-001 60.00 Cylinder With Primus Controlled Access 20-700 120.00 Compression Primus XP Controlled Access 20-700-XP 120.00

Ring & Spring: Primus UL437 20-500 138.00

Rose Trim

Primus XP UL437 20-500-XP 138.00 Primus Lockout 20-715 157.00 Primus XP Lockout 20-715-XP 157.00 Primus UL437 Lockout 20-515 171.00 Primus XP UL437 Lockout 20-515-XP 171.00

Cylinder With Comp. Ring & 20-002 71.00

1/8” Blocking Ring:

Conventional

Adams Rite 2331 (available in 1-1/8” only)

L583-254Classic

Conventional

Dim.X = .252Y = .638

YX

L583-153Everest®

& Primus®

Dim.X = .252Y = .638

YX

L583-274For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

YX

L583-275For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

YX

Dim. X = .261Y = .644

Dim. X = .261Y = .644

L583-475For cyl. length 1 1/4”,

1 1/2”, 1 3/4”

L583-474For cyl. length 1 1/8”,

1 3/8”, 1 5/8”L583-274For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

YX

L583-275For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

YX

Dim. X = .261Y = .644

Dim. X = .261Y = .644

L583-477For cyl. length 1 1/4”,

1 1/2”, 1 3/4”Schlage L9060 Outside and Other Straight Cam Applications

L583-477

YX

L583-476

YX

Dim. X = .35Y = .72

Dim. X = .35Y = .72

L583-476For cyl. length 1 1/8”,

1 3/8”, 1 5/8”Schlage L9060 Outside and Other Straight Cam Applications

L583-477

YX

L583-476

YX

Dim. X = .35Y = .72

Dim. X = .35Y = .72

B502-191Classic Conventional

Dim.X = .338Y = .71

YX

B502-948Everest & Primus

Dim.X = .338Y = .71

YX

* Specify hand for hotel function cylinders. Not available in Primus. Furnished 0-bitted; emergency keys must be ordered separately. ** Subject to Specials discounting and extended factory lead time.

Also for Schlage K-Series (discontinued), Falcon® non-deadbolt functions, Adams Rite® 2331 deadlocks,Baldwin® mortise locks, Corbin Russwin® ML2242 insideand ML2255.Von Duprin® exit devices use 1 1/4” cylinder (dim =114).To order dogging cylinders for Von Duprin® exit devices, specify complete cylinder andXQ11-947** for Classic conventional cylinders orXQ11-949** for Everest and Primus cylinders.Available at no additional charge.

Notes: See facing page.

CYL-29Price Book 74Effective March 4, 2013 • Rev. 3/13

Standard Cylindersfor Adams Rite Locks Mortise • CYLINDERS

Notes: 1) Prices apply to 1 1/8”, 1 1/4” and 1 3/8”. For 1 1/2”, 1 5/8” and 1 3/4” add $32.90. Everest hotel function cylinders are available 1 1/8”, 1 1/4” and 1 3/8” only. See Special Cylinders for 2” - 5” long cylinders. 2) 1 1/8” (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness. See page CYL-36 for required dimension. 3) Housing finishes: 605, 606, 612, 613, 619, 625 and 626. 4) Plug finishes: 606 and 626 only. 5) To order less Schlage logo specify cylinder “with K510-612 faceplate”. 6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 7) Lockout keys are not furnished with cylinders and must be ordered separately. 8) Lockout cylinders are not available master keyed. 9) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 10) For cams and other parts, see page CYL-31. 11) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness. 12) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

For keying in thefield, order 10-pieceBulk Pack Cylinders.

Cylinders are sub-assembledto save time!

See CYL-5

Mortise Cylinders (cont’d) Complete Price Cam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series Cylinder Only Conventional 26-072 $53.00 Primus Lockout 20-718 157.00 Cylinder With Primus XP Lockout 20-718-XP 157.00 Compression Primus UL437 Lockout 20-518 171.00 Ring and Spring Primus XP UL437 Lockout 20-518-XP 171.00

Conventional 20-013 60.00 Cylinder With Primus Controlled Access 20-706 120.00 3/8” Blocking Ring Primus XP Controlled Access 20-706-XP 120.00 Primus UL437 20-506 139.00 Primus XP UL437 20-506-XP 139.00

Adams Rite 4070 Series Conventional 26-073 $53.00 Cylinder Only Primus Controlled Access 20-708 112.00 Primus XP Controlled Access 20-708-XP 112.00

Primus UL437 20-508 139.00

Primus XP UL437 20-508-XP 139.00

B502-292Classic Conventional

Dim.X = .187Y = .562

YX

B502-944Everest® & Primus®

Dim.X = .187Y = .562

YX

B502-380Classic Conventional

Dim.X = .323Y = .627

YX

B502-945Everest & Primus

Dim.X = .323Y = .627

YX

Cylinders with these cams include set screw packB220-050 for Adams Rite locks.

L583-447For cyl. length 1 1/4”,

1 1/2”, 1 3/4”

Adams Rite MS 4500 & 4700, Lori 4500,Corbin Russwin DL3000

L583-447

Adams Rite MS 4500 & 4700,Lori 4500, Corbin Russwin DL3000

L583-446

YX

Dim. X = .19Y = .57

Dim. X = .19Y = .57

YX

YX

L583-446For cyl. length 1 1/8”,

1 3/8”, 1 5/8”

Adams Rite MS 4500 & 4700, Lori 4500,Corbin Russwin DL3000

L583-447

Adams Rite MS 4500 & 4700,Lori 4500, Corbin Russwin DL3000

L583-446

YX

Dim. X = .19Y = .57

Dim. X = .19Y = .57

YX

YX

B520-744For cyl. length 1 1/4”,

1 1/2”, 1 3/4”Adams Rite 4070

B520-744

Adams Rite 4070

B520-743

Y X

Dim. X = .33Y = .63

Dim. X = .33Y = .63

Y X

B520-743For cyl. length 1 1/8”,

1 3/8”, 1 5/8”Adams Rite 4070

B520-744

Adams Rite 4070

B520-743

Y X

Dim. X = .33Y = .63

Dim. X = .33Y = .63

Y X

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-30

CYLINDERS • MortiseConcealed Shell

L-Series

Notes: 1) Prices apply to 1 1/8”, 1 1/4” and 1 3/8”. For 1 1/2”, 1 5/8” and 1 3/4” add $32.90. Extended lengths are available. See Special Cylinders. Everest hotel function cylinders are available 1 1/8”, 1 1/4” and 1 3/8” only. 2) 1 1/8” (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness. See page CYL-36 for required dimension. 3) Finishes: 606 and 626. 4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families.. See Terms & Conditions for more information. 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

* Specify hand for hotel function cylinders. Not available in Primus. Emergency keys must be ordered separately.

Concealed Shell Mortise Cylinders Complete Price Cam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside)

Conventional 30-004 $71.00

Primus Controlled Access 20-789 124.00

Cylinder Only: Primus XP Controlled Access 20-789-XP 124.00

L Escutcheon

Primus UL437 20-589 142.00

Primus XP UL437 20-589-XP 142.00

Hotel Function (conventional) 30-005* 93.00Schlage L9060 Outside Conventional 26-023 $71.00

Primus Controlled Acess 24-767 124.00 Cylinder Only:

L Escutcheon Primus Controlled Acess-XP 24-767-XP 124.00

Primus UL437 24-567 142.00

Primus XP UL437 24-567-XP 142.00

L583-254Classic

Conventional

Dim.X = .252Y = .638

YX

L583-153Everest®

& Primus®

Dim.X = .252Y = .638

YX

B502-191Classic

Conventional

Dim.X = .338Y = .71

YX

B502-948Everest

Conventional

Dim.X = .338Y = .71

YX

Cams for Competitors’ Cylinders in Schlage Locks* L583-197 Sargent and Yale non-IC (was XL11-758) L583-198 Corbin Russwin non-IC (was XL11-545)

XL11-895 Corbin Russwin

* Sold separately only.

CYL-31Price Book 74Effective March 4, 2013 • Rev. 3/13

Non-IC Camsand Dummy Cylinder Mortise • CYLINDERS

Cams Non Modular Cylinders Part Price Number Description EachB502-191 L9060 Straight Classic Conventional $2.50B502-292 Adams Rite MS Classic Conventional 2.50B502-380 Adams Rite 4070 Classic Conventional 8.90B502-944 Adams Rite MS Everest® & Primus® 2.50B502-945 Adams Rite 4070 Everest & Primus 8.90B502-948 L9060 Straight Everest & Primus 2.50L583-153 L-Series Everest & Primus 2.50L583-197 L-Series for Sargent and Yale non-IC cylinders 8.90L583-198 L-Series for Corbin Russwin non-IC cylinders 8.90L583-254 L-Series Classic Conventional 2.50XQ11-935* Inverted straight Everest and Primus (dogging) 2.50XL11-895 L-Series for Corbin Russwin 8.90

Cams - Modular Cylinders Part Price Number Description EachL583-476 L9060 for cyl. lengths 1-1/8”, 1-3/8” and 1-5/8” $2.20L583-477 L9060 for cyl. lengths 1-1/4”, 1-1/2” and 1-3/4” 2.20B520-743 Cam, Cyl, Mortise. A/R 4070 for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 8.90B520-744 Cam, Cyl, Mortise. A/R 4070 for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 8.90L583-446 Adams Rite MS for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.20L583-447 Adams Rite MS for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.20L583-474 L-Series for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.20L583-475 L-Series for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.20B520-740 Inverted Straight Cam (dogging) for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.50B520-741 Inverted Straight Cam (dogging) for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.50

Cam Screws For Non Modular Cylinders Part Price Each Number Description (Order in multiples of 100)B502-468 Classic conventional up to 1 3/8” $0.20B502-942 Everest & Primus up to 1 3/8” 0.34B502-943 Everest & Primus over 1 3/8” 0.48B590-295 Classic conventional over 1 3/8” 0.34

Cam Screws For Modular Cylinders Part Price Each Number Description (Order in multiples of 100)B520-690 Camscrew, (5-40 x 1/2”) for 1-1/8” & 1-1/4” cylinder length $0.14B520-691 Camscrew, (5-40 x 3/4”) for 1-3/8” & 1-1/2” cylinder length 0.32B520-692 Camscrew, (5-40 x 1”) for 1-5/8” & 1-3/4” cylinder length 0.42Modular Cylinder Housing Screws B520-693 Modular Housing Screw (8-32 x 7/8”) $1.20

Dummy Cylinder Part Price Number Description Length Each38-070 Dummy cylinder only, less ring and cam 1 1/8”, 1 1/4”, 1 3/8”, 1 1/2” $44.00

Note: 1) For thumbturn cylinders see page L-36.

* Subject to Specials discounting and extended factory lead time.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-32

CYLINDERS • Mortise Full Size Interchangeable Core

,

Full Size Interchangeable Core Complete Price Cam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside) Housing Only Housing Less Core 30-016 $44.00 Conventional Core 30-008* 104.00 Cylinder With Primus® Core 20-798 174.00 Compression Primus® XP Core 20-798-XP 174.00 Ring & Spring: Faculty Res. Function Core 30-010** 104.00 L & N Escutcheons Housing Less Core 30-007 51.00 Conventional Core 30-138* 113.00 Cylinder With Primus Core 20-776 184.00 Compression Ring, Primus XP Core 20-776-XP 184.00 Spring, and 3/8” Blocking Faculty Res. Function Core 30-140** 113.00 Ring: Rose Trim Housing Less Core 30-137 59.00Schlage L9060 Outside Housing Only Housing Less Core 30-032 $44.00 Cylinder With Conventional Core 30-030* 104.00 Compression Ring & Spring: L & N Primus Core 20-782 174.00 Escutcheons Primus XP Core 20-782-XP 174.00 Cylinder With Compression Ring, Primus Core 20-783 184.00

Spring, and 1/2” Blocking

Ring: Rose Trim*** Primus XP Core 20-783-XP 184.00

Von Duprin, Monarch and Other Straight Cam Applications Housing Only Housing Less Core 20-059 $44.00 Conventional Core 26-091* 104.00 Cylinder With Compression Primus Core 20-763 174.00

Ring & Spring Primus XP Core 20-763-XP 174.00

Housing Only Housing Less Core 26-064 52.00 Conventional Core 20-061* 113.00 Cylinder With Primus Core 20-771 184.00 Compression Ring, Primus XP Core 20-771-XP 184.00 Spring, and 3/8” Blocking Ring Housing Less Core 26-094 59.00

L583-255

K510-680

Dim.X = .338Y = .778

YX

K510-730

Dim.X = .338Y = .71

Y

X

* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details. ** Specify hand for hotel function cylinders. Not available in Primus. Emergency key must be ordered separately. *** For this configuration with conventional core, order 30-030 cylinder and 36-082-050 blocking ring. **** Subject to Specials discounting and extended factory lead time.

Also for Schlage K-Series (discontinued), Falcon® non-deadbolt functions, Von Duprin & Monarch exit devices, Adams Rite® 2331 deadlocks, Baldwin® mortise locks, Corbin Russwin® ML2242 inside and ML2255, Best 30H latch function.

For dogging cylinders for Von Duprin exit devices, specify complete cylinder (with core) and XQ11-948.**** Available at no additional charge.

Notes: See facing page.

Dim. X = .252 Y = .638

Y

X

CYL-33Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Interchangeable Core,Cams and Parts Mortise • CYLINDERS

Full Size Interchangeable Core (cont’d) Complete Price Cam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500, 4700 Series Cylinder Only Housing Less Core 20-060 $44.00 Cylinder With Compression Conventional Core 26-098* 104.00 Ring & Spring Conventional Core 20-062* 121.00 Cylinder With 3/8” Blocking Ring Primus® Core 20-766 195.00 Primus® XP Core 20-766-XP 195.00Adams Rite 4070 Series Cylinder Only Housing Less Core 20-090 $44.00

Cylinder With

Conventional Core 20-091* 121.00 Compression Ring, Spring 3/16” and 3/8” Blocking Rings Primus Core 20-722 195.00

Primus XP Core 20-722-XP 195.00

K510-711

Dim.X = .187Y = .562

YX

B520-378

Dim.X = .323Y = .627

YX

Cylinders with this cam include set screw pack B220-050 for Adams Rite locks.

* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details.Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626. 2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores. 3) Control keys are not furnished with cylinders and must be ordered separately. 4) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) 2 1/4” through 5” cylinders are available. See Special Cylinders CYL-51 for more information. 7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended. 8) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness. 9) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Interchangeable Core Cams Part Price Number Description EachB520-378 Adams Rite 4070 $8.90K510-680 L9060 Outside 2.50K510-711 Adams Rite MS 2.50K510-730 Straight cam 2.50L583-255 L-Series (except L9060 outside) 2.50 B520-698 Falcon Series MA Mortise Lock 9.10

Other Full Size IC Mortise Cylinder Parts Part Price Number Description EachL583-200 Cam screw (order in multiples of 100) $0.24C604-334* Driver, universal 4.50K510-474 Friction washer 1.90

* Will upgrade housings manufactured before March 1992 to accept Everest and Primus cores.

For plugs, shells, pins, springs, etc.,see CYL-51, CYL-52, CYL-53, CYL-55.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-34

CYLINDERS • Mortise Small Format Interchangeable Core

Small Format Interchangeable Core Complete Price Cam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside) Cylinder With Compression Everest & Everest 29 Combinated Core 80-308 $112.00

Ring & Spring: Construction Disposable 80-115 52.00

Core Keyed 80-138 80.00

L & N Escutcheons

Housing less Core 80-108 52.00 Cylinder With Compression Everest & Everest 29 Combinated Core 80-301 114.00

Ring, Spring, and Construction Disposable 80-109 58.00

1/4” Blocking Ring: Rose Trim Core Keyed 80-131 88.00 Housing less Core 80-101 58.00Schlage L9060 Outside

Everest & Everest 29 Combinated Core 80-304 $112.00

Cylinder With Construction Disposable 80-112 52.00 Compression Ring Core Keyed 80-134 88.00

& Spring:

Housing Less Core 80-104 52.00

L & N Escutcheons*

Von Duprin, Monarch and Other Straight Cam Applications

Everest & Everest 29 Combinated Core 80-302 $119.00

Cylinder With

Disposable 80-110 58.00 Compression Ring, Construction Spring and Core

Keyed 80-132 88.00

1/4” Blocking Ring

Housing Less Core 80-102 58.00

L583-255

Dim.X = .252Y = .638

Y

X

K510-680

K510-730

Dim.X = .338Y = .778

YX

* For rose trim also order 36-082-050 blocking ring. ** Subject to Specials discounting and extended factory lead time.

Dim.X = .338Y = .71

Y

X

Also for Schlage K-Series (discontinued),Falcon® non-deadbolt functions, Von Duprin® exit devices, Adams Rite® 2331 deadlocks, Baldwin® mortise locks, Corbin Russwin® ML2242 inside and ML2255.

To order dogging cylinders for Von Duprin® and Monarch® exit devices, specify complete cylinder (with core) and XQ11-948**.Available at no additional charge.

Notes: See facing page.

CYL-35Price Book 74Effective March 4, 2013 • Rev. 3/13

Small Format Interchangeable Core,Cams and Parts Mortise • CYLINDERS

Small Format Interchangeable Core (cont’d) Complete Price Cam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500 and 4700-Series Everest & Everest 29 Combinated Core 80-303 $119.00 Construction Disposable 80-111 58.00 Cylinder With Core Keyed 80-133 88.00 3/8” Blocking Ring Housing less Core 80-103 58.00

Adams Rite 4070 Series

Everest & Everest 29 Combinated Core 80-305 $119.00 Cylinder With Compression Ring, Construction Disposable 80-113 58.00 Spring and 1/4” Core Keyed 80-135 88.00 Blocking Ring

Housing Less Core 80-105 58.00

K510-711

Dim.X = .187Y = .562

YX

B520-378

Dim.X = .323Y = .627

YX

Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626. 2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores. 3) Control keys are not furnished with cylinders and must be ordered separately. 4) Key symbol must be specified. Everest B and Everest 29 R Families keyways are restricted. See Terms & Conditions for more information. 5) All keys for construction cores must be ordered separately. 6) Keyed construction cores are assessed a non-refundable handling charge (50-231) per core. See Keys and Keying: Small Format Construction Core Program for details. 7) Specify GRN for green or BRN for brown if a specific construction combination is required. 8) All SFIC cylinders with Adams Rite MS or 4070 cams are furnished with set screw pack B220-050. 9) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness. 10) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Interchangeable Core Cams Part Price Number Description EachB520-378 Adams Rite 4070 $8.90K510-680 L9060 Outside 2.50K510-711 Adams Rite MS 2.50K510-730 Straight cam 2.50L583-255 L-Series (except L9060 outside) 2.50

Other SFIC Mortise Cylinder Parts Part Price Number Description EachB520-484 Cam screw (order in multiples of 100) $0.26B520-483 Throw member (driver) 4.60B220-050 Adams Rite set screw pack 1.90

For pins, springs, etc.,see CYL-50.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-36

CYLINDERS • MortiseL-Series, LV-Series

Cylinder Length Reference Tables

How to Measure Mortise Cylinder Lengths, LVFull Face and Interchangeable Core Concealed

LENGTH LENGTH

Cylinder and Length Requirements, L-Series Door Thickness 1 3/8” 1 3/4” 2” 2 1/4” Function Trim Cylinder Dimension L460, L464, L9460, L9464 Rose 30-001 118 — Escutcheon 30-021 118 114 138 112 — Concealed 30-004 118 114 138 112

Rose 30-002 — 118L9485 — Escutcheon 30-022 — 114 138 112 Concealed 30-005 — 114 138 112 Rose 30-002 114 138 112 158L9486 — Escutcheon 30-022 118 114 138 112 Concealed 30-005 118 114 138 112 Rose 30-001 114 138 112 158L9496 — Escutcheon 30-021 118 114 138 112 Concealed 30-004 118 114 138 112

L462, L463, L9462, L9463 Rose 30-001 118

—

Escutcheon 30-001 114 — — —

— 30-021 — 118 114 138 — Concealed 30-004 — 118 114 138

Rose 20-001 118

L9060 Outside — Escutcheon 20-001 114 — — — 26-021 — 118 114 138 Concealed 26-023 — 118 114 138

Note: 1) Blocking rings and/or compression rings may be required and must be ordered separately.

Dimensions for Mortise Cylinders Cylinder Length Dimension 1 1/8” 118 1 1/4” 114 1 3/8” 138 1 1/2” 112 1 5/8” 158 1 3/4” 134

L9050, L9056,L9070, L9076,L9080, L9080EL/EU, L9453, L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473,L9480, L9485 per XL11-557

L9060, L9071, L9077, L9082, L9082EL/EU*, L9457, L9462 per XL11-886, L9464, L9466, L9482

CYL-37Price Book 74Effective March 4, 2013 • Rev. 3/13

L-Series, LV-SeriesCollar Reference Tables Mortise • CYLINDERS

Dimensions for Blocking Rings Blocking Ring Length Dimension 1/8” 012 3 /16” 018 1/4” 025 5/16” 031 3/8” 037 7/16” 043 1/2” 050

Full Size IC Cylinder Blocking Ring Requirements, L-Series, LV-Series Door Thickness 1 3/8” 1 3/4” 2” 2 1/4” Function Trim Dimension Rose 050 037 025 025 Escutcheon 025 012 N/R N/R

L9485 Rose — 037 025 025 Escutcheon — 012 N/R N/RL9486, L9496 Rose 012 N/R N/R N/R Escutcheon 025 012 N/R N/RL9060*, L9071*, L9077*, L9082*, L9457*, L9462* per XL11-886, Rose — 050 043 031L9466*, L9482* Escutcheon 025 012 N/R N/RL460, L464, L9460, L9464 Rose 050 037 025 025L462*, L463*, L9462*, L9463* Rose — 050 043 031

Notes: 1) Specify blocking ring (36-082), finish and dimension. 2) Blocking ring (36-082) must be used with compression ring (36-083). 3) N/R = None Required.

Small Format IC Cylinder Blocking Ring Requirements, L-Series, LV-Series Door Thickness 1 3/8” 1 3/4” 2” 2 1/4” Function Trim Dimension Rose 037 025 012 N/R Escutcheon** N/R N/R N/R N/R

Rose — 050 037 025 Escutcheon 018 N/R N/R N/RL9496 Rose 025 012 N/R N/R Escutcheon N/R N/R N/R N/RL460, L464, L496, L9460, L9464 Rose 037 025 012 N/RL462*, L463*, L9462*, L9463* Rose — 050 037 025

Notes: 4) Specify blocking ring (36-082), finish and dimension. 5) Blocking ring (36-082) must be used with compression ring (36-083). 6) N/R =None Required.

Blocking and Compression Rings Part Specify Price Number Finish Description Each36-079* • Blocking ring for use without compression ring $10.2036-082* • Blocking ring for use with compression ring 8.8036-083 • Compression ring and spring 7.40L583-195 Compression ring spring 0.92

* Specify dimension.

** Compression ring not required for doors over 1 9/16˝ thick.

* 2 Blocking rings required.

L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473, L9480, L9485 per XL11-557

L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473, L9480, L9485 per XL11-557

L9060*, L9071*, L9077*, l9082*, L9082EL/EU*, L9457*, L9462* per XL11-886, L9464*, L9466*, L9482*

* 2 Blocking rings required.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-38

CYLINDERS Ingersoll Rand Compatible Cams

Ingersoll Rand Compatible Cams Cams for Schlage Cylinders Classic Modular Cyl Modular Cyl

Description Conventional Interchangeable Everest and Lengths: 1-1/8”, Lengths: 1-1/4” non-IC Core Primus non-IC 1-3/8”, 1-5/8” 1-1/2”, 1-3/4”Schlage L series,

except L9060 outside L583-254 L583-255 L583-153 L583-474 L583-475Schlage L9060 outside B502-191 K510-680 B502-948 L583-476 L583-477Schlage K series (discontinued) B502-191 K510-730 B502-948 L583-476 L583-477Falcon M-Series Non-Deadbolt

Functions (discontinued) B502-191 K510-730 B502-948 L583-476 L583-477

Falcon M-Series deadbolt functions (discontinued) A09894-001-00* XB12-046 B502-907 B520-738 B520-739

Falcon MA-Series All functions except MA381 B520-698 L583-638 L583-639

Von Duprin mortise exit devices B502-191 K510-730 B502-948 L583-476 L583-477Von Duprin mortise exit devices B502-191 per K510-730 per B502-948 per

with dogging XQ11-947 XQ11-948 XQ11-949 B520-740 B520-741

Glynn-Johnson HL6, except 9060 outside L583-254 L583-255 L583-153 L583-476 L583-477

Glynn-Johnson HL6, 9060 outside B502-191 K510-680 B502-948 L583-476 L583-477Schlage CM5500, CM5600,

PRO5500, VIP5500, 650 keyswitch B502-191 K510-680 B502-948 L583-476 L583-477Falcon 24/25 exit Device all trims

but 718C or 718NL A09897-024-00* A12667-003-00*

A09897-024-00*

Falcon 24/25 exit Device with trims 718C or 718NL (Falcon #24 cam)

A09894-021-00*

A09894-021-00*

* These part numbers represent Falcon part numbers and are available to order through Falcon.

Note: 1) For pricing, see page CYL-47.

CYL-39Price Book 74Effective March 4, 2013 • Rev. 3/13

Ingersoll Rand Compatible Cams and Tailpieces Rim • CYLINDERS

Falcon Retrofit Cylinder Reference Table Side Lock Cylinder Complete Price Keyway Plug Shell Tailpiece/ View Series Mechanism Cylinder Each Type Cam Conventional 21-020 $48.00 Classic 33-137 A508-653 B611, T381 Everest & Everest 29 33-138 A508-653 IS & W, Primus 20-728 105.00 Classic 33-136 all except 561 Primus XP 20-728-XP Everest & Everest 29 33-119 A700-031 Primus UL 20-528 129.00 Classic 33-154 A508-655 Primus XP UL 20-528-XP Everest & Everest 29 33-221 Conventional 24-031 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 T, all except Primus 24-761 105.00 Classic 33-136 381 IS & 571 Primus XP 24-761-XP Everest & Everest 29 33-119 A508-655 030730-001* Primus UL 24-561 129.00 Classic 33-154 Primus XP UL 24-561-XP Everest & Everest 29 33-221 Conventional 24-032 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 T571 Primus 24-762 105.00 Classic 33-136 Primus XP 24-762-XP Everest & Everest 29 33-119 A508-655 030730-002* Primus UL 24-562 129.00 Classic 33-154 Primus XP UL 24-562-XP Everest & Everest 29 33-221 Conventional 24-033 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 W561, knobs Primus 24-763 105.00 Classic 33-136 Primus XP 24-763-XP Everest & Everest 29 33-119 A508-655 Q330-252* Primus UL 24-563 129.00 Classic 33-154 Primus XP UL 24-563-XP Everest & Everest 29 33-221 Conventional 24-034 48.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 W561, levers Primus 24-764 105.00 Classic 33-136 Primus XP 24-764-XP Everest & Everest 29 33-119 A508-655 Q330-165* Primus UL 24-564 129.00 Classic 33-154 Primus XP UL 24-564-XP Everest & Everest 29 33-221 Conventional 24-035 60.00 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 MA, DB Primus 24-765 120.00 Classic 33-136 functions Primus XP 24-765-XP Everest & Everest 29 33-119 A508-655 See Cam Primus UL 24-565 142.00 Classic 33-154 chart on Primus XP UL 24-565-XP Everest & Everest 29 33-221 page Conventional 20-001 60.00 Classic 33-137 A508-653 CYL-38 for Everest & Everest 29 33-138 A508-653 proper MA, Non DB Primus 20-700 120.00 Classic 33-136 cam functions Primus XP 20-700-XP Everest & Everest 29 33-119 A508-655 Primus UL 20-500 142.00 Classic 33-154 Primus XP UL 20-500-XP Everest & Everest 29 33-221 Conventional 23-013 48.00 Classic 33-137 A508-653 C604 -524 Everest & Everest 29 33-138 A508-653 B, all except Primus 20-750 105.00 Classic 33-136 611 Primus XP 20-750-XP Everest & Everest 29 33-119 A508-655 C604-243 Primus UL 20-550 129.00 Classic 33-154 Primus XP UL 20-550-XP Everest & Everest 29 33-221

* These part numbers represent Falcon part numbers and are available to order through Falcon.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-40

CYLINDERS • Rim Complete Cylinders

Rim Cylinders Price Type Cylinder Mechanism Tailpiece Complete Each Conventional Horizontal 20-022

$53.00 Vertical 20-021

Primus® Horizontal 20-710 113.00 Vertical 20-709

Primus XP Horizontal 20-710-XP 113.00

Vertical 20-709-XP Primus UL437 Horizontal 20-510

143.00 Vertical 20-509 Primus XP UL437 Horizontal 20-510-XP

143.00 Vertical 20-509-XP

Primus 20-716 157.00 Primus XP Horizontal 20-716-XP Primus UL437 20-516 172.00 Primus XP UL437 20-516-XP Thumbturn None Horizontal XB11-979 79.00

Standard(non-IC)

Lockout

Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626. 2) Plug finishes: 606 and 626 only. 3) All items include collar, mounting screws and backplate. 4) Tailpiece orientation may be changed in the field. For Von Duprin, Monarch and most other applications, tailpiece should be horizontal. 5) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 7) The following keys are not furnished with cylinders and must be ordered separately: •controlkeys •operatingkeysforconstructioncores •lockoutkeys 8) Lockout cylinders are not available master keyed. 9) To order less logo, specify: “with K510-612 faceplate” for standard cylinder. “with 23-031 core” for full size interchangeable core cylinder. 10) Standard (non-IC) cylinders are available for application that is thicker than 3” ( combined door & device trim thickness) over 3” thick and available with special mounting screw locations for Sargent exit devices. See Special Cylinders CYL-51. 11) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 12) Conventional full size IC cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended. 13) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

For keying in the field, order 10-pieceBulk Pack Cylinders.

Cylinders are sub-assembled to save time!See CYL-5

Verticle Tailpiece (No. 1 bar) Horizontal Tailpiece (No. 2 bar)

CYL-41Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts Rim • CYLINDERS

Notes: 1) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

Rim Cylinder Parts Part Price Number Description Each36-066 Collar, IC cylinders $6.60B202-328 Screws and backplate pack 5.70B220-001* Tailpiece & driver, full size IC 9.60B502-200 Backplate 3.80B502-209 Mounting screw 1.10B502-310-604 Driver, standard (non-IC) cylinder .94B502-899 Tailpiece, standard (non-IC) cylinder 2.20B520-153 Ring, cylinder, NL 6.50B520-361* Tailpiece retainer, full size IC (order in mult. of 100) 0.20B600-107 Throw member for SFIC models 2.20

* Not compatible with housings manufactured before July 1997. For replacement of older parts, order housings less core (20-079).

For plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.

Rim Cylinders Price Type Cylinder Mechanism Tailpiece Complete Each Conventional Core 20-057* $99.00

Primus Core Convertible 20-757 167.00 Primus XP Core 20-757-XP 167.00 Housing only-less core 20-079 44.00

Everest & Everest 29 Combinated Core 80-329** 104.00

Keyed Construction Core Horizontal

80-159*** 72.00

Disposable Construct. Core 80-116 44.00

Housing only-less core 80-129 44.00

Full SizeInterchangeable Core

Small FormatInterchangeable Core

Notes: See Previous Page

* To order with construction core, see Keys and Keying: Full Size Construction Core Program. ** Key symbol must be specified. Everest B and Everest 29 R Families keyways are restricted. See Terms & Conditions for more information. *** Specify GRN for green or BRN for brown construction cores. A non-refundable handling charge (50-231) is assessed per core. See Keys and Keying: Small Format Construction Core Program for details.

20-057

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-42

CYLINDERS • Interchangeable Cores Full Size

23-031

Full Size Cores Part Price Description Number EachConventional core 23-030 $53.00Conventional core less logo 23-031 53.00Primus® core 20-740 113.00Primus® XP core 20-740-XP 113.00Primus core less logo 20-741 113.00Primus XP core less logo 20-741-XP 113.00Hotel function conventional core for L9485 and L9486 30-120* 53.00Hotel function conventional core, less logo, for L9485 and L9486 30-121* 53.00

* Specify hand for hotel function cores. Emergency keys must be ordered separately.

Notes: 1) Control keys must be ordered separately. 2) Finishes: 606 and 626. 3) Specify keyway to distinguish between Everest® and Classic. Example: C or CP (Classic) vs. C123 (Everest). 4) Full size cores, both conventional and Primus, can be integrated into any Schlage key system with compatible Everest or Classic keyways. 5) Primus cores are Controlled Access. Specify LKB if 0-bitted Primus cores are required less key blanks. Deduct $13.00 per core. 6) For construction cores, see Keys & Keying: Full Size Construction Core Program. 7) Split key construction not available for interchangeable cores. 8) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 9) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended. 10) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Full Size Core Parts Part Price Number Description EachC503-115 Cap pin spring (Order in multiples of 100) $0.16C503-118 Cap (Order in multiples of 25) 1.20C603-827 Cap pin (Order in multiples of 100) 0.18C603-956 Actuating ring 5.10C603-964 Actuating pin (control top pin) 0.48C603-967 Control bottom pin (Order in multiples of 100) 0.1623446339 AD Series CY, MS, MD, 993R, 993 S, 993M 3.50

For plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.

23-030

For keying in thefield, order 10-piece

Bulk Pack Cores.Cores are sub-assembled

to save time!

See CYL-5

CYL-43Price Book 74Effective March 4, 2013 • Rev. 3/13

Small Format(Best® Style) Interchangeable Cores • CYLINDERS

80-037

80-033

Everest® & Everest 29™ Patented Keyway Small Format Interchangeable Cores Part Price Description Number EachEverest combinated core, includes master keying 80-037 $59.00Everest uncombinated core 80-036 39.00

Best® Keyway Small Format Interchangeable Cores Part Price Description Number Each7-Pin uncombinated, specify keyway 80-033 $27.006-Pin uncombinated, specify keyway 80-043 27.00

AD-Series Tailpiece for Small Format Core Price Chassis Lever Design Description Tailpiece Each SFIC Driver 29446347 $9.10 CY, MS, MD All SFIC Driver, Spacer (for 6 pins core) and 46929456 10.20 Instruction sheet SFIC Driver N523-091 9.10 Except ATH, 8AT SFIC Driver, Spacer (for 6 pins core) and 09-774 10.90 993R, 993S, 993M Instruction sheet SFIC Driver 29446347 9.10 ATH, 8AT SFIC Driver, Spacer (for 6 pins core) and 46929456 10.20 Instruction sheet

Notes: 1) Control keys must be ordered separately. 2) Finishes: 606, 626 and 613 (simulated). 3) Everest B Family and Everest 29 R Family keyways are restricted. See Terms & Conditions for more information. 4) Key symbol must be specified for combinated cores. 5) Uncombinated cores are furnished less keys, pins and springs. 6) For construction cores, see Keys & Keying: Small Format Construction Core Program.

Notes: 7) Finishes: 606 and 626. 8) Uncombinated cores are furnished less keys, pins and springs. Factory keying is not available. 9) Specify keyway using B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H, JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TDB=TD, QB=Q. 10) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

For pins, springs, etc.,see CYL-51.

For quick delivery on SFIC Everest

Uncombinated Cores,see Keys & Keying:QuicKey Program

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-44

CYLINDERS • Competitive Retrofit Corbin Russwin andSargent Reference Table

Corbin Russwin® Retrofit Cylinder Reference Table Lock Cylinder Price Complete Keyway Plug Shell Side View Series Mechanism Each Cylinder Type (See CYL-55) (See CYL-57) Tailpiece Conventional $48.00 24-022 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 CL3300 Primus 105.00 20-762 Classic 33-136 Primus XP 20-762-XP Everest & Everest 29 33-119 A508-655 N523-022

Primus UL437 129.00 20-562 Classic 33-154 Primus XP UL437 20-562-XP Everest & Everest 29 33-221 Conventional 48.00 24-139 Classic 33-137 A508-653 Everest & Everest 29 33-138 A508-653 CL3400 Primus 105.00 20-739 Classic 33-136 CL3600 Primus XP 20-739-XP Everest & Everest 29 33-119 A508-655 A301-338

Primus UL437 129.00 20-539 Classic 33-154 Primus XP UL437 20-539-XP Everest & Everest 29 33-221 Conventional 48.00 24-127 Classic 33-060 A201-690 CK4200 Everest & Everest 29 33-232 A100-052 UT5200 Primus 105.00 20-727 Classic 33-081 None (since Primus XP 20-727-XP Everest & Everest 29 33-222 A201-690 1963) Primus UL437 129.00 20-527 Classic 33-080 Primus XP UL437 20-527-XP Everest & Everest 29 33-223

For pins, springs, etc.,see CYL-51.

Sargent® Retrofit Cylinder Reference Table Lock Cylinder Price Complete Keyway Plug Shell Side View Series Mechanism Each Cylinder Type (See CYL-55) (See CYL-57) Tailpiece Conventional $48.00 24-119 Classic 33-007 A508-653 C604-243 Everest & Everest 29 33-231 A508-653 C604-243 7L, 8L, 10 Primus® 105.00 20-719 Classic 33-163 Line Levers Primus XP 20-719-XP Everest & Everest 29 33-224 A508-655 C604-243 Primus UL437 129.00 20-519 Classic 33-162 Primus XP UL437 20-519-XP Everest & Everest 29 33-225 Conventional 48.00 24-120 Classic 33-007 A100-045 Everest & Everest 29 33-231 A100-049 7, 8, 9 Line Primus 105.00 20-720 Classic 33-163 C303-437 Knobs Primus XP 20-720-XP Everest & Everest 29 33-224 A508-637

Assembly

Primus UL437 129.00 20-520 Classic 33-162 with cap

Primus XP UL437 20-520-XP Everest & Everest 29 33-225 Conventional 48.00 24-126 Classic 33-007 A100-046 C604-243 6 Line Everest & Everest 29 33-231 A100-050 C604-243 Except Primus 105.00 20-726 Classic 33-163 B Knob Primus XP 20-726-XP Everest & Everest 29 33-224 A100-048 C604-243 Primus UL437 129.00 20-526 Classic 33-162 Primus XP UL437 20-526-XP Everest & Everest 29 33-225

Notes: 1) Finishes: 606 and 626 only. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) Hotel/Faculty Restroom function cylinders are not supported by Schlage. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) For rim cylinders with Sargent® mounting screw locations, see Special Cylinders CYL-51. 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

CYL-45Price Book 74Effective March 4, 2013 • Rev. 3/13

Yale Reference Table,Tailpieces and Actuators Competitive Retrofit • CYLINDERS

Yale® Retrofit Cylinder Reference Table Lock Cylinder Complete Price Keyway Plug Shell Side View Series Mechanism Cylinder Each Type (See CYL-55) (See CYL-57) Tailpiece Conventional 24-147 $48.00 Classic 33-007 A508-653 Everest & Everest 29 33-231 A508-653 5300LN Primus 20-747 105.00 Classic 33-163 5400LN Primus XP 20-747-XP Everest & Everest 29 33-224 A508-655 A301-043

Levers Primus UL437 20-547 129.00 Classic 33-162 Primus XP UL437 20-547-XP Everest & Everest 29 33-225 Conventional 24-123 48.00 Classic 33-007 A508-653 5300, 5400, Everest & Everest 29 33-231 A508-653 6200 Series Primus 20-723 105.00 Classic 33-163 B520-409 Knobs Primus XP 20-723-XP Everest & Everest 29 33-224 A508-655 Primus UL437 20-523 129.00 Classic 33-162 Primus XP UL437 20-523-XP Everest & Everest 29 33-225

For pins, springs, etc.,see CYL-51.

Notes: 1) Finishes: 606 and 626 only. 2) Specify keyway to distinguish between Everest®, Everest 29™ or Classic. Example: C or CP (Classic) vs. C123 (Everest) or S123 (Everest 29). 3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) Hotel/Faculty Restroom function cylinders are not supported by Schlage. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) For rim cylinders with Sargent® mounting screw locations, see Special Cylinders CYL-51. 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Tailpieces and Actuators Part Price Number Locksets EachA301-043 Yale Levers $3.60A301-338 Corbin Russwin 1.30 CL3400/CL3600B520-409 Yale Knobs 22.80C303-437 Sargent 7, 8, 9 10.10 (Assembly with cap)C604-243 Sargent 6, 7L, 8L, 10 Line 1.20

Miscellaneous Part Price Number Description EachA501-783 Blocking disc, Yale levers $3.80B520-408 Sleeve, Yale cylinders 4.60B520-407 Washer, Sargent 4.80C607-062 Spacer, Corbin Russwin CL3300 2.70

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-46

Corbin Russwin Master Ring

B520-728

Corbin Russwin Master Ring

B520-729

Dim. X = .34Y = .90

YX

Dim. X = .34Y = .90

YX

CYLINDERS • Competitor RetrofitCorbin Russwin

Master Ring Mortise

20-009, 20-505, 20-705

For old black cast iron case mortise locks only.

B502-486Classic Conventional

Dim.X = .328Y = .893

Y X

B502-946Everest® & Primus®

Dim.X = .328Y = .893

Y X

Notes: 1) Prices apply to 1 1/8”, 1 1/4” and 1 3/8”. For 1 1/2”, 1 5/8” and 1 3/4” Primus add $32.90. For 1 1/2”, 1 5/8” and 1 3/4” Conventional add $9.20. 2) Finishes: 605, 606, 609, 612, 613, 625 and 626. 3) To order less Schlage logo specify cylinder “with K510-612 faceplate”. 4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Bushing, Corbin Russwin Master Ring Part Price Number Description EachB202-339 Reducing bushing and screws $67.00

Trim Collars Corbin Russwin Master Ring Part Specify Price Number Finish Description Each38-033 • Trim collar $8.00

Cams, Corbin Russwin Master Ring Part Price Number Description EachB502-486 Classic Conventional - Non Modular Cylinders $23.20B502-946 Everest & Primus® - Non Modular Cylinders 27.206XB11-825* Interchangeable core - Non Modular Cylinders 24.10B520-728 Modular Cylinders (all keyways) length 1-1/8”, 1-3/8”, 1-5/8” 27.10B520-729 Modular Cylinders (all keyways) length 1-1/4”, 1-1/2”, 1-3/4” 27.10

For plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.

6 Extended Factory Lead Time * Not subject to standard discount terms.

B520-729For cyl. length 1 1/4”,

1 1/2”, 1 3/4”

B520-728For cyl. length 1 1/8”,

1 3/8”, 1 5/8”

Corbin Russwin Master Ring

B520-728

Corbin Russwin Master Ring

B520-729

Dim. X = .34Y = .90

YX

Dim. X = .34Y = .90

YX

Mortise Cylinders, Corbin Russwin Master Ring Complete Price Cam Description Cylinder Mechanism Cylinder EachCorbin Russwin Master Ring

Conventional 20-009 $148.00

Master Ring Primus Controlled Access 20-705 228.00 (includes bushing) Primus XP Controlled Access 20-705-XP 228.00 Primus UL437 20-505 250.00 Primus XP UL437 20-505-XP 250.00

CYL-47Price Book 74Effective March 4, 2013 • Rev. 3/13

Cams for Schlage Competitor Retrofit • CYLINDERS

Cams for Schlage Mortise Cylinders to Operate Other Manufacturers’ Locks Modular Modular Classic Conventional Interchangeable Everest® & Primus®

Cylinder Cylinder Non-IC Core Non-IC 20-061, 20-771, 20-001 Cyl. length Cyl. length 20-001 26-094, 80-102, Everest Conventional 1 1/8”, 1 3/8”, 1 5/8” 1 1/4”, 1 1/2”, 1 3/4” 80-110, 80-132, 20-500 and 80-302 20-700 Primus

Dim.X = .155Y = .775

Y

X

Dim.X = .232Y = .729

Y

X

Dim.X = .235Y = .729

Y

X

Dim.X = .186Y = .718

YX

B520-295 (was XB11-458)

Corbin Russwin®

DL4000 Series(Old Corbin 420

andRusswin 1503)

Corbin Russwin®

ML2200 Series(Old Corbin 7000-9000

andRusswin 4000-5000)All functions except

ML2255 andML2242 inside

(see straight cam)

Corbin Russwin A65ML2200 master ringdeadbolt functions

manufactured before6/10/93 and

old Russwin cast ironresidential locks.

For all Best 40H Series& 30H Deadbolt function

Yale®

2160

Arrow ®

#004

Sargent ®

13-0660All functions

except 16 insideand 50 outside

B520-254 (was XB11-426)

B520-366 (was XB11-656)

B520-730 B520-731

B520-732 B520-733

B520-734 B520-735

B520-736 B520-737

B520-233(was XB08-899)

B520-253(was XB11-352)

B520-309(was XB11-629)

B520-223(was XB03-142)

B520-360(was XB11-817)

B520-367(was XB11-887)

B520-256(was XB11-430,

replaces XB10-659)

B520-296(was XB11-461,

replaces XB11-484)

B520-329 (was XB11-631,

replaces XB11-630)

With Sold Cam Cylinder Separately B502-191 N/C $2.50B520-223 $8.90 B520-233 8.90 B520-253 N/C B520-254 N/C B520-256 8.90 8.90B520-295 8.90 B520-296 N/C

With Sold Cam Cylinder SeparatelyB520-309 N/CB520-329 N/C B520-360 N/C $8.90B520-366 N/C B520-367 N/C B502-948 N/C 2.50K510-730 N/C 2.50XB12-046 N/C 8.90

With Sold Cam Cyl. Separately B520-730 1-1/8”, 1-3/8”, 1-5/8” N/C B520-731 1-1/4”, 1-1/2”, 1-3/4” N/C B520-732 1-1/8”, 1-3/8”, 1-5/8” N/C B520-733 1-1/4”, 1-1/2”, 1-3/4” N/C B520-734 1-1/8”, 1-3/8”, 1-5/8” N/C B520-735 1-1/4”, 1-1/2”, 1-3/4” N/C $8.90B520-736 1-1/8”, 1-3/8”, 1-5/8” N/C B520-737 1-1/4”, 1-1/2”, 1-3/4” N/CL583-638 1-1/8”, 1-3/8”, 1-5/8” N/CL583-639 1-1/4”, 1-1/2”, 1-3/4” N/C

B502-191Classic

Conventional

Dim.X = .338Y = .71

YX

B502-948Everest

& Primus

Dim.X = .338Y = .71

YX

Best 30

Latch Function

K510-730

Dim.X = .338Y = .71

Y

X

L583-476 L583-477

B520-730Corbin Russwin DL4000 SeriesFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-731Corbin Russwin DL4000 SeriesFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Y

X

Dim. X = .153Y = .761

Y

X

Dim. X = .153Y = .761

B520-730Corbin Russwin DL4000 SeriesFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-731Corbin Russwin DL4000 SeriesFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Y

X

Dim. X = .153Y = .761

Y

X

Dim. X = .153Y = .761

B520-732Corbin Russwin ML2200 SeriesFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-733Corbin Russwin ML2200 SeriesFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Y

X

Dim. X = .236Y = .731

Y

X

Dim. X = .236Y = .731

B520-732Corbin Russwin ML2200 SeriesFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-733Corbin Russwin ML2200 SeriesFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Y

X

Dim. X = .236Y = .731

Y

X

Dim. X = .236Y = .731

B520-734Corbin Russwin A65,ML2200 master ringFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-735Corbin Russwin A65,ML2200 master ringFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Dim. X = .242Y = .757

Dim. X = .242Y = .757

Y

X

Y

X

B520-734Corbin Russwin A65,ML2200 master ringFor housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-735Corbin Russwin A65,ML2200 master ringFor housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Dim. X = .242Y = .757

Dim. X = .242Y = .757

Y

X

Y

X

B520-736Yale 2160, Arrow 004,Sargent 13-0660For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-737Yale 2160, Arrow 004,Sargent 13-0660For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Dim. X = .187Y = .727

Dim. X = .187Y = .727

YX

YX

B520-736Yale 2160, Arrow 004,Sargent 13-0660For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"

B520-737Yale 2160, Arrow 004,Sargent 13-0660For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"

Dim. X = .187Y = .727

Dim. X = .187Y = .727

YX

YX

Schlage L9060 Outside and Other Straight Cam Applications

L583-477

YX

L583-476

YX

Dim. X = .35Y = .72

Dim. X = .35Y = .72

Schlage L9060 Outside and Other Straight Cam Applications

L583-477

YX

L583-476

YX

Dim. X = .35Y = .72

Dim. X = .35Y = .72

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-48

CYLINDERS • Mail Box

20-033

20-030 20-001

20-067 20-066 20-069

Letter/Mail Box Cylinders and Application Table Keyway Cam Plug Shell Complete Complete Description Type (See Below) (See CYL-55) (See CYL-57) Cylinder Cyl. Price

American Device Classic C604-268 33-616 C203-726 20-066 Everest & Everest 29 C604-268 33-234 A100-051 $70.00Auth, 466, 470, 480 series Classic C604-269 33-616 C203-726 20-067 Everest & Everest 29 C604-269 33-234 A100-051

Bommer vertical mail box Classic L583-476 33-137 N/A 20-001-118 61.00 Everest & Everest 29 L583-476 33-138 N/A Bommer & Florence, Cutler Mail Classic C604-269 33-616 C203-726 20-069 Chute, Federal Equipment Everest & Everest 29 C604-269 33-234 A100-051

Corbin Wood Products Classic C604-271 33-616 C203-726 20-033 70.00 Everest & Everest 29 C604-271 33-234 A100-051

Dura Steel Classic C604-088 33-806 A201-849 20-030 Everest & Everest 29 C604-419 33-233 A201-698

Notes: 1) Finishes: 606 and 626. 20-001 also available 605, 612, 613 and 625. 2) Federal law prohibits the master keying of a letter box cylinder. 3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 4) Not available in Primus®. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Miscellaneous Parts Part Price Number Description EachB502-468 Screw, 2 required, 20-030 $0.20 Classic (order multiples of 100)B502-942 Screw, 20-030 Everest 0.34 (order multiples of 100)C503-346 Spacer, 20-033, 20-066, 0.94 20-067, 20-069C604-050 Mounting bracket, 20-033 10.00C604-051 Screw post, 2 req’d, 20-033 1.40C604-052 Screw, 2 req’d, 20-033 1.80 C604-053 Lock washer, 2 req’d, 20-033 1.80

Miscellaneous Parts Part Price Number Description EachC604-088 Cam, 20-030 Classic $26.20C604-089 Bracket, 20-030 19.50C604-226 Screw, 2 req’d, 20-033, 20-066, 0.16 20-067, 20-069 (order mult. of 100)C604-234 Washer, 2 req’d, 20-033, 20-066, 0.16 20-067, 20-069 (order mult. of 100)C604-268 Cam, 20-066 17.40C604-269 Cam, 20-067, 20-069 17.40C604-271 Cam, 20-033 21.30C604-419 Cam, 20-030 Everest 26.30

For pins, springs, etc.,see CYL-51.

CYL-49Price Book 74Effective March 4, 2013 • Rev. 3/13

Cylinders,Non-Standard Finishes Special • CYLINDERS

Special Cylinders 6 Extended Factory Lead Time Not subject to standard discount terms “X” Price Number Description EachExtra Long Mortise CylindersXB03-418 Mortise cylinder (20-001, 30-001 or 30-004), 1 7/8” – 5” long Classic, Everest or Everest 29 $293.00 Full size IC mortise cylinder (26-091 or 30-008), 2 1/4” – 5” long Classic, Everest or Everest 29 400.00XB11-475* Primus® full size IC mortise cylinder (20-763 or 20-798), 2 1/4” – 5” long 533.00 Full size IC mortise cylinder housing less core (20-059 or 30-007) 2 1/4” – 5” long 351.00XB11-638 Primus mortise cylinder (20-700, 20-787 or 20-789), 1 7/8” – 5” long 407.00Mortise Cylinder with Switch

XB09-195 Mortise cylinder (20-001) with “on” and “off” switch for key controlled electrical circuits, $310.00 conventional XB09-795 Same as XB09-195, but double position, classic conventional only (no master keying available) 416.00

XQ11-804 Primus mortise cylinder (20-700) with “on” and “off” switch for key controlled electrical circuits 421.00Rim Cylinders

XB04-618 Conventional cylinder (20-021 or 20-022) for doors over 3” thick $367.00 Insure device/ trim thickness is included in addition to door thickness Primus cylinder (20-710) for doors over 3” thick 407.00

Insure device/ trim thickness is included in addition to door thicknessXB11-789 Conventional cylinder (20-022) with mounting holes for Sargent® exit device 70.00XB11-790 Primus cylinder (20-710) with mounting holes for Sargent® exit device 143.00 Full size IC, conventional core (20-057) for doors over 3” thick 383.00

Insure device/ trim thickness is included in addition to door thicknessXB11-958 Full size IC, Primus core (20-757) for doors over 3” thick 515.00

Insure device/ trim thickness is included in addition to door thickness Full size IC, housing less core (20-079) for doors over 3” thick 335.00

Insure device/ trim thickness is included in addition to door thickness

Notes: 1) Specify complete cylinder as required, then “X” number. Example: 20-001 per XB09-195. 2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 3) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $13.00 per cylinder. 4) If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center Process in the Forms and Example section. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

* Available in 1/4” increments. Order collars or blocking rings separately to fill any gaps.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-50

CYLINDERS • Parts Pins & SpringsFull Size Cylinders

Original Manufacturer Nickel Silver Pins-Full Size cylinders Part Description PriceNumber Type Size Each 34-101 #134-102 Top pins #234-103 #334-202 #234-203 #334-204 #434-205 Master pins #534-206 #634-207 #7 Order in34-208 #8 multiples of 10034-209 #9 $0.0834-300 #034-301 #134-302 #234-303 #334-304 Bottom pins #434-305 #534-306 #634-307 #734-308 #834-309 #9 Everest & Order in34-007 Everest 29 — multiples of 50 check pin 1.20

Primus® Finger Pins and Sidebars Part Price Number Description Each34-001 Finger pin #1 34-002 Finger pin #2 Order in34-003 Finger pin #3 multiples of 10034-004 Finger pin #4 $0.8834-005 Finger pin #534-006 Finger pin #634-058 Finger pin #7C603-950 Sidebar 3.20

Cap and Cap Pin Part Price Number Description Each Order inC503-116* Cap pin (non-IC) multiples of 100 $0.14 Order inC503-118* Cap multiples of 25 1.10 Order inC603-827 Full Size IC Cap Pin multiples of 100 0.16

Construction Balls, RCK Part Price Number Description Each34-401 Pack of 1,000 ball bearings $30.50

Springs Part Price Number Description EachC503-113 Pin tumbler spring (including Primus)

Order inC503-115 Cap retainer pin spring (including Primus) multiples of 100

C603-951 Primus finger pin spring and Everest check pin spring $0.14

C603-952 Primus sidebar spring

Ward Rings Part Price Number Description EachC503-833 Ward ring $0.86

K510-045 Stop ring for hotel function Everest & Everest 29

2.80 mortise cylinders K510-434 Stop ring for hotel function Classic mortise cylinders 2.80

OrderingShaded prices are

specified in unit quantities (per

piece) and must be ordered in multiples.

Example:Order 100 34-300,

Receive 1 bag of 100pins. Price = $8.00

* See CYL-13 for KC-Series cap and cap pin

CYL-51Price Book 74Effective March 4, 2013 • Rev. 3/13

Pins & SpringsSmall Format Interchangeable Cores Parts • CYLINDERS

Original Manufacturer Nickel Silver SFIC Pins Part Description PriceNumber Type Size Each 34-902 #2B34-903 #3B34-904 #4B34-905 #5B34-906 #6B34-907 #7B34-908 #8B34-909 Master/ #9B34-910 build-up/ #10B34-911 top pins #11B34-912 #12B34-913 #13B34-914 #14B Order in34-915 #15B multiples of 10034-916 #16B $0.1034-917 #17B34-918 #18B34-919 #19B34-800 #0A34-801 #1A34-802 #2A34-803 #3A34-804 #4A34-805 Bottom pins #5A34-806 #6A34-807 #7A34-808 #8A34-809 #9A34-950 Everest & Everest 29 check pin – 1.20

SFIC Caps Part Price Number Description Each Order in34-952 21C Cap multiples of 500 $0.08

SFIC Springs Part Price Number Description Each Order inC504-114 20S Tumbler spring multiples of 500 $0.08 Order inC504-116

Everest & Everest 29 multiples of 100

check pin spring

0.16

SFIC Plug Retainer Part Price Number Description Each Order inC603-936 Plug retainer multiples of 20 $1.30

OrderingShaded prices are

specified in unit quantities (per

piece) and must be ordered in multiples.

Example:Order 100 34-800,

Receive 1 bag of 100pins. Price = $10

Note: 1) SFIC plug retainer is compatible with SFIC Everest products manufactured after October 18, 2002.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-52

CYLINDERS • Parts Plugs for Modular Housing.

Modular Housing Interchangeability Housing Cam Cam Screw Plug Extension

Part Number Size Part Number

B520-721 1-1/8” L583-474 B520-690 –

B520-722 1-1/4” L583-475 B520-690 –

B520-723 1-3/8” L583-474 B520-691 B590-298

B520-724 1-1/2” L583-475 B520-691 B590-298

B520-725 1-5/8” L583-474 B520-692 B590-299

B520-726 1-3/4” L583-475 B520-692 B590-299

Modular Key-In-Knob Cylinder

Modular Rim Cylinder

Modular Mortise Cylinder

1³⁄₈"

1¹⁄₂"

1⁵⁄₈"

1³⁄₄"

1¹⁄₈" housing

1¹⁄₄"

Plug ExtensionB590-299

Plug ExtensionB590-298

CamL583-474 orL583-475

CamL583-474 or L583-475

CamL583-474 or L583-475

Cam Screw, 1”B520-692

Cam Screw, ³⁄₄”B520-691

Cam Screw, ¹⁄₂”B520-690

B520-726 1³⁄₄” L583-475 B520-692 B590-299

CYL-53Price Book 74Effective March 4, 2013 • Rev. 3/13

Plugs for Key-in-Knob/Lever, etc. Parts • CYLINDERS

Plugs, Key-in-Knob/Lever, Deadlock and Mail Box Part Price Number Description Each33-005* 5-Pin (except F51 and F80), C, CE, E and F keyways only33-137 6-Pin Classic conventional $30.30 33-007 Sargent & Yale, Classic conventional33-059* 5-Pin, F, FA-Series Knobs, BEL, GEO, PLY, AND, DNB (C keyway only) 21.90 33-059-149* 5-Pin, F-Series Knobs, ORB, C keyway only33-060 Corbin Russwin CK4200, UT5200 Classic conventional 30.4033-065* 5-Pin, F, FA-Series Levers, ACC, AVA, FLA, CLT, CHP, STA (C keyway only) 21.2033-080 Corbin Russwin CK4200, UT5200 Classic Primus® UL437 / Classic Primus XP UL437 76.0033-081 Corbin Russwin CK4200, UT5200 Classic Primus / Classic Primus XP 54.1033-119 Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 56.7033-154 Classic Primus UL437 / Classic Primus XP UL437 73.0033-136 Classic Primus / Class Primus XP 56.7033-162 Sargent & Yale, Classic Primus UL437 / Classic Primus XP UL437 76.0033-163 Sargent & Yale, Classic Primus / Classic Primus XP 54.5033-216 6-pin Classic, hotel function 42.9033-221 Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 76.0033-222 Corbin Russwin CK4200, UT5200, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 54.5033-223 Corbin Russwin CK4200, UT5200, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 76.0033-224 Sargent & Yale, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 54.5033-225 Sargent & Yale, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 76.0033-138 Everest & Everest 29 conventional 33-231 Sargent & Yale, Everest & Everest 29 conventional33-232 Corbin Russwin CK4200, UT5200, Everest & Everest 29 conventional 32.0033-233 Mail box 20-030 Everest & Everest 29 conventional33-234 Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29 conventional33-235 Everest & Everest 29 hotel function 42.9033-616 Mail box 20-033, 20-066, 20-067, 20-069 Classic conventional

32.10 33-806 Mail box 20-030 Classic conventional

* These plugs are pre-drilled for lost ball construction keying (33-005 is pre-drilled in C keyway only).Notes: 1) Specify finish: 606 (430 for F-Series Knobs & Levers) and 626 (429 for F-Series Knobs & Levers). 2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 3) For Titan/Kwikset and Weiser reorder components see page Cyl-56.

Modular Cylinders Plugs-Key In lever/ Knob Part Price Number Description Each33-137 6 Pins, Plug, Classic $30.3033-138 6 Pins, Plug, Everest 32.0033-136 6 Pins, Plug, Classic Primus / Primus XP 56.7033-119 6 Pins, Plug, Everest Primus / Primus XP 56.70

* For L-Series Classic hotel cylinders, specify “warded.”Notes: 4) Specify 606 or 626 finish. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) IC cap pins and cap pin springs must be ordered separately. 7) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

Plugs, Full Size Interchangeable Core Part Price Number Description Each33-058* Classic conventional $33.10 33-133 Everest & Everest 29 conventional hotel function33-139 Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 57.1033-160 Classic Primus / Classic Primus XP 33-236 Everest & Everest 29 conventional 45.10

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-54

CYLINDERS • Parts Shells/ bodies

Key in Lever/ knob -Modular Cylinders Type Part Price Number Description EachA508-653 6 Pin, Body & Cover, Classic/Classic, Everest, Everest 29 $21.90 A508-655 6 Pin, Body & Cover, Primus/Primus XP 44.80

Back Housings-Modular Cylinder Part Price Number Description EachB520-721 Back Housing, Mortise 1-1/8” $6.60 B520-722 Back Housing, Mortise 1-1/4” 6.60 B520-723 Back Housing, Mortise 1-3/8” 6.60 B520-724 Back Housing, Mortise 1-1/2” 26.50 B520-725 Back Housing, Mortise 1-5/8” 26.50 B520-726 Back Housing, Mortise 1-3/4” 26.50 B520-727 Back Housing, Rim 6.60 K110-480 316 Front housing 643e finish 6.60 K110-480 605 Front housing 605 finish 6.60 K110-480 606 Front housing 606 finish 6.60 K110-480 609 Front housing 609 finish 6.60 K110-480 612 Front housing 612 finish 6.60 K110-480 613 Front housing 613 finish 8.80 K110-480 619 Front housing 619 finish 6.60 K110-480 625 Front housing 625 finish 6.60 K110-480 626 Front housing 626 finish 4.50 K110-480 629 Front housing 629 finish 6.60 K110-480 630 Front housing 630 finish 6.60 Order in Multiples of 100B520-690 Screw, Cam , 5-40 X 1/2” (for modular cylinders length 1 1/8” & 1 1/4”) 0.14 B520-691 Screw, Cam , 5-40 X 3/4” (for modular cylinders length 1 3/8” & 1 1/2”) 0.32 B520-692 Screw, Cam , 5-40 X 1”(for modular cylinders length 1 5/8” & 1 3/4”) 0.42 B520-693 Modular cylinder housings screws, 8-32 X 7/8” 1.20 B590-298 Plug extension 1-3/8”, 1-1/2” 1.90B590-299 Plug extension 1-5/8”, 1-3/4” 1.90

OrderingShaded prices are

specified in unit quantities (per

piece) and must be ordered in multiples.

Example:Order 100 34-300,

Receive 1 bag of 100pins. Price = $8.00

CYL-55Price Book 74Effective March 4, 2013 • Rev. 3/13

Shells Parts • CYLINDERS

Shells, Key-in-Knob/Lever, Deadlock and Mail Box Part Price Number Description EachA100-049 Sargent 8 Line Everest & Everest 29 conventional A100-050 Sargent 6 Line Everest & Everest 29 conventional $27.40A100-051 Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29 conventionalC203-726 Corbin Russwin CK4200, UT5200 Everest & Everest 29 conventionalA508-655 Primus / Primus XP 48.60A201-690 Corbin Russwin CK4200, UT5200 Primus / Primus XP 47.50A201-691 Corbin Russwin CK4200, UT5200 Classic conventionalA508-653 Everest and mail box 20-030 Everest & Everest 29 conventionalA201-848 5-Pin Classic (except F-Series Knobs & Levers) 23.70A508-653 6-Pin Classic and mail box 20-030 Classic conventionalA100-045 Sargent 8 Line Classic conventionalA100-046 Sargent vertical Classic conventionalA100-047 Sargent 8 Line Primus® / Primus XP 48.60A100-048 Sargent vertical Primus / Primus XPC203-726 Mail box 20-033, 20-066, 20-067, 20-069 Classic conventional 27.40

Shells, Interchangeable Core Part Specify Price Number Finish Description EachB220-006 • Everest & Everest 29 conventional $27.40B220-117 • Everest & Everest 29 hotel function, Schlage logoB220-280 • Primus / Primus XP 55.80B220-282 • 6-Pin Classic conventional (except hotel function) 27.40B220-284 • Classic hotel function, Schlage logo

Note: 1) Finishes: 606 and 626 only.

Modular cylinders Mortise and Rim cylinders components & Service Kits Part Price Number Description Each09-992 Service kit- Back Housing for 1 1/8” length

Back Housing B520-721 Mortise 1 1/8”, 2 Housing screws B520-693, cam screw B520-690 $6.70 Order front housing and cam separately 09-993 Service kit-Back Housing for 1 1/4” length

B520-722 Mortise 1 1/4”, 2 Housing screws B520-693, cam screw B520-690 7.80 Order front housing and cam separately 09-994 Service kit -back housing for 1 3/8” length

B520-723 Back Housing Mortise 1 3/8”, plug extension B590-298, cam screw B520-691, 12.20 2 housing screws B520-693. Order front housing and cam separately 09-995 Service kit- back housing for 1 1/2” length Back Housing,

B520-724 Mortise 1 1/2”, 2 Housing screws B520-693 , plug extension B590-298, 32.00 cam screw B520-691. Order front housing and cam separately 09-996 Service kit- back housing for 1 5/8” length

Back Housing, B520-725 Mortise 1 5/8”, 2 Housing screws B520-693, plug extension 32.00 B590-299, cam screw B520-692. Order front housing and cam separately 09-997 Service kit-back housing for 1 3/4” length

Back Housing, B520-726 Mortise 1 3/4”, 2 Housing screws B520-693 , 32.00 plug extension B590-299, cam screw B520-692. Order front housing and cam separately 09-998 Service kit-back housing Rim Cyl

Back Housing Rim B520-727, housing screws B520-693, Tail piece B502-899, 15.90 Driver B502-310, back plate & screws B202-328. Order front housing and cam separately

Note: 2) Finishes: 605, 606, 609, 612, 613, 625 and 626.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CYL-56

CYLINDERS Notes

Keys-1Price Book 74Effective March 4, 2013 • Rev. 3/13

KEYS & KEYINGIntroduction

Table of ContentsKeys Ordered Separately Keys-2 Classic Conventional Key Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-2 Classic Conventional Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-3 Everest® Full Size Conventional Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . . Keys-4 Everest® Small Format IC Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . Keys-5 Key Blanks, Best ® Key Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-5 Everest 29™ Full Size Conventional Key Blanks and Cut Keys . . . . . . . . . . . . . . . . Keys-6 Everest 29™ Small Format IC Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . . . . Keys-7 Classic Primus ® Key Blanks, Cut Keys and I .D . Cards . . . . . . . . . . . . . . . . . . . . . . Keys-8 Classic Primus ® XP Key Blanks, Cut Keys and I .D . Cards . . . . . . . . . . . . . . . . . . . Keys-9 Everest® Primus ® Key Blanks, Cut Keys and I .D . Cards . . . . . . . . . . . . . . . . . . . . Keys-10 Everest® Primus ® XP Key Blanks, Cut Keys and I .D . Cards . . . . . . . . . . . . . . . . . . Keys-11 Split Key Construction Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-12 Special Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-14 Presentation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-15Key Stamping Keys-16Cylinder Stamping Keys-17Construction Core Program Keys-19 Full Size Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19 Small Format Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19Keying Charges Keys-20 Contract Master Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-20 Contract Construction Keying (CK)/Split Key Construction Keying . . . . . . . . . . . . Keys-20 Other Keying (Non-Master Keyed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-20 Residential Master Keying (RMK) and/or Residential Construction Keying (RCK) . . . Keys-21 Bitting Lists (Transcripts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-22 KSC Generic Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-22 Keys Ordered with Locks or Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-23 Pack Change Keys Independently (PKI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-23QuicKey Program Keys-25 QuicKey Product Availability and Order Requirements- Full Size Key Blanks . . . . Keys-25 QuicKey Product Availability and Order Requirements-SFIC Keys and Cores . . . Keys-26SITEMASTER 200 ® Keys-27 Key System Management Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-27How To Order Forms & Examples Quick Key order form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-29 Letter of Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-31 Primus order check list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-32 Master keyed order form and example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-33-34 Master key system system summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-37 Primus face sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-45 Primus Signature Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-47

For detailed information on cylinder and keyway terms see Cylinders: Schlage Cylinder and Keyway Terminology.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-2

KEYS & KEYING • Keys Ordered Separately Classic Conventional Key Blanks

35-100 (5-Pin Standard)35-101 (6-Pin)

35-130 (5-Pin)35-131 (6-Pin)

35-102 35-056

35-140 (5-Pin)35-141 (6-Pin)

35-143 (5-Pin)35-144 (6-Pin)

CONTROL

Classic Conventional Key Blanks Price Each Part Standard Restricted Number Description Sections SectionsStandard Bow

35-100 Standard bow, embossed both sides Order in 5-Pin multiples of 5035-130 Standard bow, unembossed both sides $1.20 $3.70

35-101 Standard bow, embossed both sides Order in 6-Pin multiples of 50 35-131 Standard bow, unembossed both sides 1.70 5.2035-102 Emergency Standard bow, embossed both sides, notched for all ward positions 4.5035-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both sides 4.3035-077 Hotel Function, embossed both sides35-079 Hotel Function, unembossed both sidesLarge Bow35-140 5-Pin Large bow, embossed both sides $5.20 35-141 6-PinAccess Bow35-143* 5-Pin Access bow, embossed both sides $5.20 35-144** 6-Pin

* Available with C, CE, E, and F key sections only. ** Available with all sections except L and Y.

Notes: 1) Specify key section. C, CE, E, EF, F, FG, G, H, J, K, and L are standard. Quad, Reverse, and Numbered (“Paracentric”) are restricted and require a letter of authorization from the end-user. See Terms & Conditions. 2) Schlage recommends ordering L and Y section keys cut at the factory. L and Y sections are available only in stainless steel, which will damage the cutters of most key machines in the field. 3) Large bow custom logo keys are available as key blanks only. Cut keys are not available.

Keys-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Classic Conventional Cut Keys,Classic Conventional Master Keys Keys Ordered Separately • KEYS & KEYING

86776C Combination

Section

R492518

C Master Key Symbol

Registry #AA

Section

CONTROL

C

Section

R492518

48-100 (5-Pin)48-101 (6-Pin)

49-100 (5-Pin)49-101 (6-Pin)

48-05649-056

Standard markings unless otherwise specified . See page Keys-10 for additional key stamping information .

Classic Conventional Cut Keys Price Each Standard Restricted Part Number Description Sections SectionsStandard Bow48-100 5-Pin Standard bow, embossed both sides48-101 6-Pin $5.50 $11.7048-130 5-Pin Standard bow, unembossed both sides48-131 6-Pin –48-102 Emergency Standard bow, embossed both sides, notched for all ward positions 11.70 11.7048-056 Standard bow, embossed both sides

48-076 Control Standard bow, unembossed both sides 11.70 11.7048-077 Hotel Function, embossed both sides

48-079 Hotel Function, unembossed both sidesLarge Bow48-140 5-Pin Large bow, embossed both sides 8.30 –48-141 6-PinAccess Bow48-143* 5-Pin Access bow, embossed both sides 8.30 48-144** 6-Pin –

* Available with C, CE, E, and F key sections only. ** Available with all sections except L and Y.

Note: 1) For keys ordered with locks or cylinders see page Keys-16.

Classic Conventional Master KeysPart Number Description Price EachStandard Bow49-100 5-Pin Standard bow, embossed both sides49-101 6-Pin 49-130 5-Pin Standard bow, unembossed both sides49-131 6-Pin 9.6049-102 Emergency Standard bow, embossed both sides, notched for all ward positions 49-056 Control Standard bow, embossed both sides 49-076 Standard bow, unembossed both sidesLarge Bow49-140 5-Pin Large bow, embossed both sides 13.00 49-141 6-PinAccess Bow49-143* 5-Pin Access bow, embossed both sides 13.00 49-144** 6-Pin

* Available with C, CE, E, and F key sections only. ** Available with all sections except L and Y.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-4

KEYS & KEYING • Keys Ordered SeparatelyFull Size Everest Conventional

Key Blanks, Cut Keys, Master Keys

35-015Unembossed

35-002Standard for

Everest D Family

35-003Control

35-009Standard for

Everest C Family

Back ofAll Blanks

(except 35-015)

DO NOT DUPLICATEPat. 5,715,717

Pat. 5,715,717 DO NOT DUPLICATEPat. 5,715,717

001426

Facility Code(Everest D Family Only)

Section

DO NOT DUPLICATEPat. 5,715,717

35-015Unembossed

35-002Standard for

Everest D Family

35-003Control

35-009Standard for

Everest C Family

Back ofAll Blanks

(except 35-015)

DO NOT DUPLICATEPat. 5,715,717

Pat. 5,715,717 DO NOT DUPLICATEPat. 5,715,717

001426

Facility Code(Everest D Family Only)

Section

DO NOT DUPLICATEPat. 5,715,717

Note: 1) See page Keys-12 for key stamping options.

Full Size Everest® Conventional Cut Keys Part C Family D Family Description Number Open Sections Restricted SectionsStandard key 48-009 —DO NOT DUPLICATE key 48-002 $6.60DO NOT DUPLICATE key, unembossed 48-015 $11.70 Set-up key 48-013Master key 49-009 —Master key, DO NOT DUPLICATE 49-002Master key, DO NOT DUPLICATE, unembossed 49-015Control key DND std ., non-factory system 48-003 Control key DND std ., factory system 49-003 11.70 Control key DND, hotel function, non-factory 48-016 11.70Control key DND, hotel function, factory sys . 49-016Emergency key DND, non-factory system 48-007Emergency key DND, factory system 49-007

Notes: 2) See page Keys-12 for key stamping options. 3) For keys ordered with locks or cylinders see page Keys-20.

Full Size Everest® Conventional Key Blanks Part C Family D Family Description Number Open Sections Restricted Sections

Standard embossed key 35-009 Order in multiples of 50 —DO NOT DUPLICATE embossed key 35-002 $2.50 $5.20DO NOT DUPLICATE unembossed key 35-015 Control key, DND embossed 35-003 4.20 5.20Control key, DND, hotel function 35-016 Emergency key blank, DND 35-007 4.40 5.20

Keys-5Price Book 74Effective March 4, 2013 • Rev. 3/13

SFIC Everest® Restricted& Best® Key Sections Keys Ordered Separately • KEYS & KEYING

001426

AAR492518

Section Facility Code

Registry No. Key Symbol

Standard markings unless otherwise specified . See Keys-12 for additional key stamping information .

35-401Key Blanks

48-401Operating Keys

49-356Control Keys

49-401Master Keys

Small Format Interchangeable CoreKeys, Everest® Restricted Key Sections Part Price Number Description EachKey Blanks

35-401 Embossed key blank Order in (control and operating) multiples35-021 Unembossed key blank of 50 (control and operating) $4.90Cut Keys48-401 Embossed operating key 9.6048-021 Unembossed operating key49-401 Embossed master key49-021 Unembossed master key 10.00 49-356 Embossed control key49-022 Unembossed control key

Key Blanks, Best® Key Sections Part Price Number Description Each Order in35-310 Key blank, 6 or 7-pin multiples of 50 $2.20

Notes: 1) All Everest® SFIC keyways are restricted. See Terms and Conditions for more information. 2) For keys ordered with locks or cylinders see page Keys-20.

35-310Key Blanks

J

DUPLICATIONPROHIBITED

Notes: 3) Specify keyway using B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H, JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TBD=TD, QB=Q. 4) Key stamping not available on 35-310 key blanks.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-6

KEYS & KEYING • Keys Ordered SeparatelyFull Size Everest 29 Conventional

Key Blanks, Cut Keys, Master Keys

Standard forControl Keys

and all T Family keys.Optional for S Family35-268 Operating35-269 Control

Back of35-269

Standard Frontfor S Family

35-270

Plain Both Sides35-272

Back ofAll Except35-272

6-PinControl

Standard Front35-004 XP Operating35-005 Control

Plain Both Sides35-013

Back ofAll Except35-013

Note: 1) See page Keys-12 for key stamping options.

Full Size Everest 29™ Conventional Cut Keys Part S Family T Family Description Number Open Sections Restricted SectionsStandard key 48-270 —DO NOT DUPLICATE key 48-268 $6.60DO NOT DUPLICATE key, unembossed 48-272 $12.20 Set-up key 48-013Master key 49-270 —Master key, DO NOT DUPLICATE 49-268Master key, DO NOT DUPLICATE, unembossed 49-272Control key DND std ., non-factory system 48-269 Control key DND std ., factory system 49-269 11.70 Control key DND, hotel function, non-factory 48-267 12.20Control key DND, hotel function, factory sys . 49-267Emergency key DND, non-factory system 48-271Emergency key DND, factory system 49-271

Notes: 2) See page Keys-12 for key stamping options. 3) For keys ordered with locks or cylinders see page Keys-20.

Full Size Everest 29™ Conventional Key Blanks Part S Family T Family Description Number Open Sections Restricted Sections

Standard embossed key 35-270 Order in multiples of 50 —DO NOT DUPLICATE embossed key 35-268 $2.50 $5.20DO NOT DUPLICATE unembossed key 35-272 Control key, DND embossed 35-269 4.20 5.20Control key, DND, hotel function 35-267 Emergency key blank, DND 35-271 4.40 5.20

Keys-7Price Book 74Effective March 4, 2013 • Rev. 3/13

SFIC Everest 29 Restricted& Best® Key Sections Keys Ordered Separately • KEYS & KEYING

Standard markings unless otherwise specified . See Keys-12 for additional key stamping information .

35-400Key Blanks

35-264Operating Keys

49-355Control Keys

49-400Master Keys

Small Format Interchangeable CoreKeys, Everest 29™ Restricted Key Sections Part Price Number Description EachKey Blanks

35-400 Embossed key blank Order in (control and operating) multiples35-264 Unembossed key blank of 50 (control and operating) $5.20Cut Keys48-400 Embossed operating key 11.3048-264 Unembossed operating key49-400 Embossed master key49-264 Unembossed master key 11.80 49-355 Embossed control key49-000 Unembossed control key

Notes: 1) All Everest 29 SFIC keyways are restricted. See Terms and Conditions for more information. 2) For keys ordered with locks or cylinders see page Keys-20.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-8

KEYS & KEYING • Keys Ordered SeparatelyClassic Primus Keys,

Classic Primus I.D. Cards

Key Blanks Cut Keys48-053, 49-053

FrontBack

of Both48-157, 49-157

Front35-157Front

35-053Front

Backof Both

PRIMUSDO NOT DUPLICATE

PRIMUSDO NOT DUPLICATE

48-053, 49-053Front

Backof Both

48-157, 49-157Front

35-157Front

35-053Front

Backof Both

PRIMUSDO NOT DUPLICATE

PRIMUSDO NOT DUPLICATE

Standard markings unless otherwise specified . See page Keys-12 for additional key stamping information .

Classic Primus® Key Blanks and Cut Keys Part Number Description Price EachKey Blanks Order in35-157 Standard bow, embossed both sides multiples of 5035-053 Standard bow, unembossed one side, “PRIMUS” logo on one side $6.0035-116 Large bow, embossed both sides 10.00 35-115 Access bow, embossed both sides35-158 Control key, standard bow, embossed both sides35-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 9.50 35-159 Lockout key, standard bow, embossed both sides 9.50Cut Keys48-157 Standard bow, embossed both sides 14.90 48-053 Standard bow, unembossed one side, “PRIMUS” logo on one side48-171 Standard bow, stainless steel LP section key 57.3048-116 Large bow, embossed both sides 19.10 48-115 Access bow, embossed both sides48-158 Control key, standard bow, embossed both sides48-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 14.60 48-172 Control key, stainless steel LP section control key 65.9048-159 Lockout key, standard bow, embossed both sides 14.90Master Keys49-157 Standard bow, embossed both sides 14.90 49-053 Standard bow, unembossed one side, “PRIMUS” logo on one side49-171 Standard bow, stainless steel LP section key 15.3049-116 Large bow, embossed both sides 19.10 49-115 Access bow, embossed both sides49-158 Control key, standard bow, embossed both sides 14.90 49-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side49-172 Control key, stainless steel LP section control key 65.90

Notes: 1) When ordering Level 1 Plus key blanks, Locksmith I.D. number must be furnished. 2) For keys ordered with locks or cylinders see page Keys-20. 3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factory since stainless steel will damage the cutters of most field key machines.

Classic Primus® I.D. Cards Part Number Level Price Each 40-061 1 Order in 40-065 1 Plus multiples of 50 40-062 2 $2.60

Keys-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Classic Primus XP Keys, Classic Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING

Key Blanks Cut Keys

48-053-XP, 49-053-XPFront

Backof Both

48-157-XP, 49-157-XPFront

35-157-XPFront

35-053-XPFront

Backof Both

PRIMUSDO NOT DUPLICATE

PAT. NO. 7,1 95 ,424

PRIMUSDO NOT DUPLICATE

PAT. NO. 7,1 95 ,424

48-053-XP, 49-053-XPFront

Backof Both

48-157-XP, 49-157-XPFront

35-157-XPFront

35-053-XPFront

Backof Both

PRIMUSDO NOT DUPLICATE

PAT. NO. 7,1 95 ,424

PRIMUSDO NOT DUPLICATE

PAT. NO. 7,1 95 ,424

Standard markings unless otherwise specified . See page Keys-12 for additional key stamping information .

Classic Primus® XP Key Blanks and Cut Keys Part Number Description Price EachKey Blanks Order in35-157-XP Standard bow, embossed both sides multiples of 5035-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side $6.0035-116-XP Large bow, embossed both sides 9.90 35-115-XP Access bow, embossed both sides35-158-XP Control key, standard bow, embossed both sides35-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 9.50 35-159-XP Lockout key, standard bow, embossed both sides 9.50 Cut Keys48-157-XP Standard bow, embossed both sides 14.90 48-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side48-171-XP Standard bow, stainless steel LP section key 57.5048-116-XP Large bow, embossed both sides 19.10 48-115-XP Access bow, embossed both sides48-158-XP Control key, standard bow, embossed both sides48-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 14.90 48-172-XP Control key, stainless steel LP section control key 65.9048-159-XP Lockout key, standard bow, embossed both sides 14.90 Master Keys49-157-XP Standard bow, embossed both sides 14.90 49-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side49-171-XP Standard bow, stainless steel LP section key 57.3049-116-XP Large bow, embossed both sides 19.10 49-115-XP Access bow, embossed both sides49-158-XP Control key, standard bow, embossed both sides 14.90 49-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side49-172-XP Control key, stainless steel LP section control key 65.90

Notes: 1) When ordering Level 1 Plus XP key blanks, Locksmith I.D. number must be furnished. 2) For keys ordered with locks or cylinders see page Keys-20. 3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factory since stainless steel will damage the cutters of most field key machines.

Classic Primus® I.D. Cards Part Number Level Price Each 40-061-XP 1 Order in 40-065-XP 1 Plus multiples of 50 40-062-XP 2 $2.60

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-10

KEYS & KEYING • Keys Ordered Separately Everest Primus Keys, Everest Primus I.D. Cards

35-012 35-005Everest Primus

Embossed Control

35-004Embossed

Everest Primus Key

Back ofAll Keys

(except unembossed)Facility or

Dealer ID Number

SectionPat. 5,809,816

PRIMUSDO NOT DUPLICATE

Pat. 5,809,816

PRIMUSDO NOT DUPLICATE

Pat. 5,809,816DO NOT DUPLICATE

001426

Everest® Primus® Key Blanks and Cut KeysPart Number Description Price EachKey Blanks Order in35-004 6-Pin Standard bow, embossed one side multiples of 5035-012 Standard bow, unembossed $6.1035-005 Control Control key, standard bow, embossed one side 35-013 Control key, standard bow, unembossed 9.7035-006 Lockout Lockout key, standard bow, embossed one side35-019 Lockout key, standard bow, unembossedCut Keys48-004 6-Pin Standard bow, embossed one side48-012 Standard bow, unembossed 48-005 Control Control key, standard bow, embossed one side 14.9048-020 Control key, standard bow, unembossed48-006 Lockout Lockout key, standard bow, embossed one side48-019 Lockout key, standard bow, unembossedMaster Keys49-004 6-Pin Standard bow, embossed one side49-012 Standard bow, unembossed 14.90 49-005 Control Control key, standard bow, embossed one side49-020 Control key, standard bow, unembossed

Everest Primus I.D. Cards Part Number Level Price Each Order in 40-060 7 or 8 multiples of 50 $3.10

Keys-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Everest Primus XP Keys, Everest Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING

35-012-XP 35-005-XPEverest Primus

Embossed Control

35-004-XPEmbossed

Everest Primus Key

Back of All Keys

(except unembossed) Facility or

Dealer ID Number

Section Pat. 5,809,816

PRIMUS DO NOT DUPLICATE

Pat. 5,809,816

PRIMUS DO NOT DUPLICATE

Pat. 5,809,816 DO NOT DUPLICATE

001426

Everest® Primus® XP Key Blanks and Cut KeysPart Number Description Price EachKey Blanks Order in35-004-XP 6-Pin Standard bow, embossed one side multiples of 5035-012-XP Standard bow, unembossed $6.1035-005-XP Control Control key, standard bow, embossed one side 35-013-XP Control key, standard bow, unembossed 8.6035-006-XP Lockout Lockout key, standard bow, embossed one side35-019-XP Lockout key, standard bow, unembossedCut Keys48-004-XP 6-Pin Standard bow, embossed one side48-012-XP Standard bow, unembossed 48-005-XP Control Control key, standard bow, embossed one side $13.3048-020-XP Control key, standard bow, unembossed48-006-XP Lockout Lockout key, standard bow, embossed one side48-019-XP Lockout key, standard bow, unembossedMaster Keys49-004-XP 6-Pin Standard bow, embossed one side49-012-XP Standard bow, unembossed $14.90 49-005-XP Control Control key, standard bow, embossed one side49-020-XP Control key, standard bow, unembossed

Everest Primus XP I.D. Cards Part Number Level Price Each Order in 40-060-XP 7 or 8 multiples of 50 $3.10

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-12

KEYS & KEYING • Keys Ordered Separately Everest 29 Primus Keys, Everest 29 Primus I.D. Cards

Everest 29™ Primus® Key Blanks and Cut KeysPart Number Description Price EachKey Blanks Order in35-199 6-Pin Standard bow, embossed one side multiples of 5035-215 Standard bow, unembossed $6.3035-273 Control Control key, standard bow, embossed one side 35-138 Control key, standard bow, unembossed 10.2035-216 Lockout Lockout key, standard bow, embossed one side35-218 Lockout key, standard bow, unembossedCut Keys48-199 6-Pin Standard bow, embossed one side48-215 Standard bow, unembossed 48-273 Control Control key, standard bow, embossed one side 15.6048-014 Control key, standard bow, unembossed48-216 Lockout Lockout key, standard bow, embossed one side48-019 Lockout key, standard bow, unembossedMaster Keys49-199 6-Pin Standard bow, embossed one side49-215 Standard bow, unembossed 15.60 49-273 Control Control key, standard bow, embossed one side49-023 Control key, standard bow, unembossed

Everest 29 Primus I.D. Cards Part Number Level Price Each Order in 40-060 7 or 8 multiples of 50 $3.10

Standard Front35-199-XP Operating35-273-XP

Plain Both Sides35-138-XP Control35-215-XP Operating

Back of All Except35-199-XP35-273-XP35-216-XP

Standard Front35-199 operating35-273

Plain Both Sides35-138 Control35-215 Operating

Back of All Except35-19935-27335-216

Keys-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Everest 29 Primus XP Keys, Everest 29 Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING

Everest 29™ Primus® XP Key Blanks and Cut KeysPart Number Description Price EachKey Blanks Order in35-199-XP 6-Pin Standard bow, embossed one side multiples of 5035-215-XP Standard bow, unembossed $6.3035-273-XP Control Control key, standard bow, embossed one side 35-138-XP Control key, standard bow, unembossed 10.2035-216-XP Lockout Lockout key, standard bow, embossed one side35-218-XP Lockout key, standard bow, unembossedCut Keys48-199-XP 6-Pin Standard bow, embossed one side48-215-XP Standard bow, unembossed 48-273-XP Control Control key, standard bow, embossed one side $15.6048-014-XP Control key, standard bow, unembossed48-216-XP Lockout Lockout key, standard bow, embossed one side48-218-XP Lockout key, standard bow, unembossedMaster Keys49-199-XP 6-Pin Standard bow, embossed one side49-215-XP Standard bow, unembossed $15.60 49-273-XP Control Control key, standard bow, embossed one side49-023-XP Control key, standard bow, unembossed

Everest 29 Primus XP I.D. Cards Part Number Level Price Each Order in 40-060-XP 7 or 8 multiples of 50 $3.10

Standard Front35-199-XP Operating35-273-XP

Plain Both Sides35-138-XP Control35-215-XP Operating

Back of All Except35-199-XP35-273-XP35-216-XP

Standard Front35-199 operating35-273

Plain Both Sides35-138 Control35-215 Operating

Back of All Except35-19935-27335-216

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-14

KEYS & KEYING • Keys Ordered SeparatelySplit Key Construction Keys,

Special Keys

35-057

Classic

35-104 Key Blank 48-104 Cut Key

Everest®

35-008 Key Blank 48-008 Cut Key

Standard

35-110 Classic Blank 48-113 Classic Cut 35-000 Everest Blank 48-000 Everest Cut

Hotel Cylindrical

35-111 Classic Blank 48-114 Classic Cut 35-001 Everest Blank 48-001 Everest Cut

Split Key Construction Keys Part Number Price Description Classic Everest Everest 29 EachKey BlanksConstruction key, standard bow, embossed 35-104 35-008 35-097 $4.90Construction insert 35-110 35-000 35-096 6.90 Construction insert, A85, AL85, D85, ND85, or H185 function 35-111 35-001 35-039 Extractor tool 35-057 17.50Cut KeysConstruction key, standard bow, embossed 48-104 48-008 48-097 4.90Construction insert 48-113 48-000 48-096 6.90 Construction insert, A85, AL85, D85, ND85, or H185 function 48-114 48-001 48-039

35-250 35-251 L583-233-458 M504-271

Special Keys Part Price Number Description Each35-250 Emergency key, A40, AL40, or D40 function $3.80 35-251 Spanner key, A85, AL85, D85, ND85, or H185 functionL583-233-458 Emergency turn, L9040 function 13.90M504-271 Emergency key, F40 or S40 function 1.7061-509* Emergency release key standard size, for occupancy deadbolts 8.4061-510* Emergency release key large, for occupancy deadbolts 16.30

Notes: 1) Split key construction keys are NOT available for interchangeable core cylinders. 2) Split key construcion keys are ONLY available in L, Y, 0000 and ZZZZ Classic sections and C000 and D000 Everest sections

* Includes one key, ring, and instruction tag.

Keys-15Price Book 74Effective March 4, 2013 • Rev. 3/13

Presentation Keys Keys Ordered Separately • KEYS & KEYING

35-22335-224

35-22735-228

35-229

Presentation Keys Part Price Number Description EachKey Blanks35-223 5-Pin Velvet case with 2 standard bow Classic gold plated blanks, embossed both sides 35-224 6-Pin35-227 5-Pin Velvet case with 1 large bow Classic gold plated blank, embossed both sides $127.0035-228 6-Pin 35-229 6-Pin Velvet case with 1 Everest® gold plated blankCut Keys48-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides 48-224 6-Pin48-227 5-Pin Velvet case with 1 large bow Classic gold plated key, embossed both sides $139.0048-228 6-Pin48-229 6-Pin Velvet case with 1 Everest gold plated keyMaster Keys49-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides 49-224 6-Pin49-227 5-Pin Velvet case with 1 large bow Classic gold plated key, embossed both sides $151.0049-228 6-Pin49-229 6-Pin Velvet case with 1 Everest gold plated key

Note: 1) Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-16

Stamping Area

Key Symbol(Standard on Everest and Primus keysfor MK systems)

Key Section Bitting(Not stamped on Everest or Primus keys)

DO NOT DUPLICATE

C

765352AA1

KEYS & KEYING • Key Stamping

When ordered with a lock or cylinder, 50-XXX charges will be added asan option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separately .

Note: 1) Maximum of 6 characters for VKC, Non Standard Code or Serial number stamping 2) Specify “delete key symbol on key” if VKC is not required. Available at no charge. 3) Everest B and Everest 29 R Family keys are stamped “RESTRICTED”. 4) Contact product support, new dies are subject to a one time charge that is quoted through RFQ process; all new dies remain the property of Schlage Lock Company. 5) Only available on unembossed keys. 6) Not available on Primus or Everest B and D or Everest 29 R and T Family keys or on keys with key symbols

stamped (VKC). 7) Serial Number is a Straight Numerical Sequence.

Key stamping locations may vary from those pictured depending on key type and the amount of key stamping required.

Key Stamping

Description Notes Key Type SpecifyPart

NumberPrice Each

Key

Visual Key Control (VKC)with standard key symbols

1 Classic conventional Stamp key symbol on key 50-217 $2.00

1,2 Everest® & all Primus® (furnished as standard) — N/C

Non-standard code 1,5 All conventional & all Primus Non-standard code 50-003 5.40per side

DO NOT DUPLICATE

Classic conventional Stamp key “Do Not Duplicate” XQ06-878

N/C

Everest C or Everest 29 S Family conventional

Use 35-002 blanks (C) or 35-268 (S)

—3

Everest B or Everest 29 R Family(furnished as standard)Everest D, Everest 29 T

Family, all Primus

Custom die stamp 4,5 All conventional & all Primus Die Stamp Information 50-219 3.60 per side

Delete key section from bow

Classic & Everest conventional, Everest Primus Delete key section 50-220 3.60

Classic Primus (furnished as standard) — N/C

Bitting not stampedClassic conventional Delete key combination 50-221 3.60

Everest & all Primus (furnished as standard) — N/C

Stamp bittingClassic conventional (furnished as standard) — N/C

6 Everest C or Everest 29 S Family conventional Stamp key bitting 50-233 5.40

Stamp with Serial Number 1,7 All conventional & all Primus Stamp Key with Serial Number 50-229 2.00

Keys-17Price Book 74Effective March 4, 2013 • Rev. 3/13

Cylinder Stamping • KEYS & KEYING

When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separtely .

AA1AA1

Note: 1) Maximum of 6 characters for VKC, Non Standard Code or Serial number stamping

Cylinder Stamping

Description Notes Key Type SpecifyPart

NumberPrice Each

Visual Key Control (VKC) with standard key symbols or non standard codes

1

Classic conventional, Everest® C & D, Everest 29™ S &T conventional

Stamp key symbol or non-conventional code on face (VKC) or Cylinder or core.

50-002 $5.10

Everest B Family and Everest 29 R — N/C

Concealed Key Control (CKC) with standard key symbols or Non-standard codes

1

Classic conventional, Everest C & D, Everest 29 S &T conventional

Stamp key symbol or non-conventional code on side (CKC) of core

50-216 $5.10

Everest B Family and Everest 29 R — N/C

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-18

KEYS & KEYING • Construction Core ProgramFull Size

Construction Core Program

Full Size Construction Core Program Temporary construction cores may be ordered with full size interchangeable core locks, mortise cylinders and rim cylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231). See Terms & Conditions for more information.

Features:

• 6-PinCkeyway. • Constructioncoreshaveatwo-toneface:thefaceplateisaflatblackfinish(622)andtheplugisunfinishedbrass. • Backofeachcoreismarkedwiththeletterthatidentifiesthekeyedalikegroup:A,BorC. • Constructioncoresarefurnishedwithnokeys(NCK).Cut keys must be ordered separately. • Acontrolkeyisrequiredtoinstallandremoveconstructioncores.Control keys must be ordered separately. If a control key is not ordered, one will be supplied at a charge of $11.70. • Constructioncoresmaybereturnedforcredit.ContactyourSchlagerepresentativeforreturnauthorization.Creditisissued upon receipt of cores at our factory.

Example:Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and onecontrol key. The following charges apply to this order: 1. 23-030-ICX construction cores (150 units). 2. 48-101-ICX cut keys (20 units). 3. 48-056-ICX cut control key (1 unit). 4. 50-231 Non-refundable handling charge (150 units-one per core ordered).

Upon return of the cores to the factory the distributor will be credited for the following: 1. 23-030-ICX construction cores (150 units).There is no credit for the keys or handling fee.

23-030-ICX 48-101-ICX 48-056-ICX

�

CO

NTR

OL

C

Section

Full Size Construction Core Program Part Price Number Description Specify Each23-030-ICX Construction core New jobs: Specify “ICX” $53.0048-101-ICX Cut key for construction phase (order separately) Existing jobs: Specify “ICA”, “ICB” or 6.7048-056-ICX Cut control key (order separately) “ICC” . 11.7050-231 Non-refundable handling charge (per core) 7.80

Notes: 1) To order mortise and rim cylinders with full size construction cores for a new job, suffix ICX to non-Primus cylinder number. Example: 30-008 ICX. For existing construction core combinations, specify ICA, ICB, or ICC. 2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Other Schlage projects in the same area using the same or different contractors may use the same key. Where a higher degree of security is desired, order a set of conventional or Primus® cores in 606 or 626 finish keyed alike to a random combination. Specify “KA Group 1”. Such cores would not be assessed the handling fee and are not returnable to Schlage.

Keys-19Price Book 74Effective March 4, 2013 • Rev. 3/13

Small Format Construction Core Program Construction Core Program • KEYS & KEYING

Example:Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and one control key. The following charges apply to this order: 1. 80-035 construction cores (150 units). 2. 48-310 cut keys (20 units). 3. 48-311 cut control key (1 unit). 4. 50-231 Non-refundable handling charge (150 units-one per core ordered).

Upon return of the cores to the factory the distributor will be credited for the following: 1. 80-035 construction cores (150 units).There is no credit for the keys or handling fee.

80-035

M204-152

48-310 48-311

Small Format Construction Core Program Temporary construction cores may be ordered with small format interchangeable core locks, mortise cylinders and rim cylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231). See Terms & Conditions for more information.

Features: • Best® A keyway • Constructioncoreshaveagreenorbrownface.Eachcoloriskeyedaliketoitsownoperatingandcontrolkey. • Constructioncoresarefurnishedwithnokeys(NCK).Cut keys must be ordered separately. • Acontrolkeyisrequiredtoinstallandremoveconstructioncores.Control keys must be ordered separately. If a control key is not ordered, one will be supplied at a charge of $11.30. • Constructioncoresmaybereturnedforcredit.ContactyourSchlagerepresentativeforreturnauthorization.Creditisissued upon receipt of cores at our factory. • Smallformatdisposablecoresmaynotbereturnedforcredit.

A

DUPLICATIONPROHIBITED

A

CONTROLDUPLICATIONPROHIBITED

Small Format Construction Cores Part Price Number Description Specify Each48-310 Cut key for construction phase (order separately) Schlage assigns the color for each $6.2048-311 Cut control key (order separately) order at random . If a specific color is 11.3080-035 Construction core required, specify “GRN” for green and 32.00

“BRN” for brown cores .50-231 Non-refundable handling charge (per core) 7.80

Small Format Disposable Cores Part Price Number Description EachM204-152 Disposable plastic construction core $4.40

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-20

KEYS & KEYING • Keying ChargesContract Master Keying, Contract

Construction Keying, Other

Contract Master Keying Part Price Number Description Each50-210 Cylinder Master keyed (MK), grand master keyed (GMK), Emergency Master keyed $14.60 (EMK), and Single keyed (SKD) groups (charge does not apply to interchangeable core) — Interchangeable core Master keyed (MK), grand master keyed (GMK), and Single N/C keyed (SKD) groups

Note: 1) The Schlage Master Key Department determines and makes the final decision in the selection and use of key sections. 100% Expansion is allowed for new master key systems unless otherwise specified.

Note: 2) Construction keyed cylinder charges are in addition to master keying charges. 3) Pack Keys Individual (PKI) 60-600 packing is included at no extra charge. 4) Construction keying not available with Primus cylinders or interchangeable cores. Construction cores may be ordered for Interchangeable core locks, mortise cylinders or rim cylinders for use during construction. Construction Core Program) 5) Split Key construction keying requires 6 pin cylinders. 6) Construction keys must be ordered separately (See Construction Core Program for 50-211)

Note: 7) Schlage locks and cylinders are furnished C123 keyway keyed different (KD) unless otherwise specified.

Contract Construction Keying (CK)/Split Key Construction Keying Part Price Number Description Each50-211 Cylinder Construction keyed (CK) $8.50

Other Keying (Non-Master Keyed) Part Price Number Description Each — Cylinder keyed different (KD) or keyed alike to a Schlage selected combination (KA) N/C in sets of 2 or more, include FSIC . — Cylinder 0-bitted or 1-bitted, as applicable* N/C50-001 Conventional and Primus Conventional cylinder keyed to a specified combination $7.70

* Conventional non-IC cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted will be furnished. Conventional IC cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted will be furnished. Primus cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 0-bitted is furnished.

When ordered with a lock or cylinder, 50-XXX charges will be added asan option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separtely .

Keys-21Price Book 74Effective March 4, 2013 • Rev. 3/13

Residential Master & Construction Keying Keying Charges • KEYS & KEYING

Residential Master Keying (RMK) and/or Residential ConstructionKeying (RCK) Qualifications:

• Residentialprojects.

• RMKand/orRCKmustbespecifiedontheorder.

• Systemsareavailablein5-PinCkeywayonly.

• SystemscannotbecombinedwithContractMasterKeysystems.

• Twolevelsofkeyingmaximum(ChangeKeyandMasterKeylevelsonly).

• Maisonkeyingallowed.

• Doordetailingandlabelingallowableaslistedbelow.

Residential Master Keying (RMK) Part Price Number Description Each50-223* Cylinder Residential Master keyed (RMK) $2.3050-009 Cylinder Residential Master keyed with Door ID Labeling (RMKID) 14.6049-100 Residential Master Key - Not offered for commercial products 9.60

Residential Construction Keying (RCK)/Lost Ball Construction Keying Part Price Number Description Each50-224* Cylinder Residential Construction keyed (RCK) $2.3050-010 Cylinder Residential Construction keyed with Door ID Labeling (RMKID) 14.6048-100 Residential Construction Master Key 5.20

Notes: 1) Lost ball construction device is triggered by the highest level permanent key unless otherwise specified. 2) Change keys packed in envelopes and packed in lock box. PKI packing available at no additional charge. 3) Residential Construction keying charges are in addition to Residential Master keying charges.

* If Door Labeling is required, the 50-009 RMK with labeling and/or 50-010 RCK with labeling charges will apply.

When ordered with a lock or cylinder, 50-XXX charges will be added asan option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separtely .

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-22

KEYS & KEYING • Keying Charges Custom Presentation Keys,Homeowners Document Folders

Custom Presentation Keys Part Price Number Description Each35-135-C* Large bow custom logo key (minimum order quantity: 400 keys) $2.2050-230 Die charge for key customization (one time charge on initial order) 197.00 net

* Send Building Partnerships orders to address given at bottom of page.Notes: 1) Large bow custom logo keys are available as key blanks only. Cut keys are not available 2) Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.

Homeowners Document Folders Part Price Number Description EachMS-J175* Document folder, plain $5.60 MS-J175* Document folder, customized (minimum customized order quantity: 100 folders) 9.30

* Send Building Partnerships orders to address given at bottom of page.

Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.

Send Building Partnerships orders to: Trade Marketing Schlage Lock Company Residential Customer Service 2119 E. Kansas City Rd. Olathe, KS 66061 FAX: (800) 366-5625 email: res_contact_center@irco.com

35-135-C MS-J17535-135-C MS-J175

HOMEOWNER DOCUMENTS

Builder Logo

Keys-23Price Book 74Effective March 4, 2013 • Rev. 3/13

Bitting Lists, KSC Key Charts Keying Charges • KEYS & KEYING

Bitting Lists (Transcripts) Part Price Number Description Each50-123 Bitting list for factory master keyed products (requires written $177.00* authorization from end-user) .50-120 Establish new master key system for field master keying (one-time 26.30 charge) . Each bitting is assessed a 50-121 or 50-122 charge below .50-121 New master key bitting for cylinders keyed in the field . 3.40 50-120 charge assessed if this bitting establishes a new system .50-122 New change key bitting for cylinders keyed in the field 2.60

KSC Generic Key Charts Part Price Number Description Each50-600 6-Pin system with 4096 change combinations furnished $975.00

Notes: 1) KSC systems are for dealer or end-user maintained master key systems. KSC systems cannot be converted or tied to factory established or factory maintained systems. 2) KSC systems are furnished with instruction manual and binder. 3) Not available for small format interchangeable cores. 4) Numberofvalid/usablechangecombinationsprovidedisnotguaranteedduetosystemconstraints.4,096is thetheoreticalnumberpossible,actualnumberofvalid/usablechangeswillvary.

* Can be used for SiteMaster download (keying and bitting details) if ordered as such. Please specify SiteMaster download file if applicable in the details column. Information reequired: is Structure or original order number, end user name, city and state (used to verify the structure number). Also required is an email address for the end user, include their full name to address the email and a “ Letter Of Authorization”.

When ordered with a lock or cylinder, 50-XXX charges will be added asan option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separtely .

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-24

KEYS & KEYING • Keying Charges Keys Ordered with Locks or Cylinders, PKI

Keys Ordered with Locks or Cylinders Part Price Number Description Each50-214 Extra cut Primus® keys ordered with lock or cylinder $8.1050-215 Extra cut standard bow Classic or Everest® C or Everest 29™ S Family 3.40 keys ordered with lock or cylinder50-227 Extra cut large bow or access bow keys ordered with lock or cylinder 5.4050-228 Cut large bow or access bow keys substituted for standard bow Classic 2.60 keys50-232 Extra cut Classic restricted families, Everest B Family, Everest D, 6.00 Everest 29 R and Everest 29 T family keys ordered with lock or cylinder

Note: 1) Two standard bow keys are furnished as standard with each lock or cylinder.

Note: 2) Split key construction keying: PKI packing is included at no extra charge.

Pack Change Keys Independently (PKI) Part Price Number Description Per Key60-000 Pack change keys independently (PKI) for split key N/C construction keying60-001 Pack change keys independently (PKI) $0.44

When ordered with a lock or cylinder, 50-XXX charges will be added asan option to the product when applicable . Stand alone

50-XXX Charges will be separate lines and priced separtely .

Keys-25Price Book 74Effective March 4, 2013 • Rev. 3/13

QuicKey Program • KEYS & KEYINGFull Size Key Blanks

QuicKey ProgramThe QuicKey Program may be used for quick delivery on keys and cores that are not part of stock products.

Qualifications: •Ordersmustbefor QuicKey products only and cannot be combined with any non-QuicKey item. •Ordersmustbeaccompaniedbyallrequiredinformation.SeeOrder Requirements in chart for complete details. •Incompleteordersororderswithproductnotqualifyingforthisprogrammaybeprocessedwithstandarddelivery. •OrdersmustbewiththeQuicKey Order Form, see page Keys-25. Also available at Schlage.com

QuicKey Product Availability and Order Requirements - Full Size Key Blanks Available Typical Products Key Family Order Requirements Lead Time

Classic - Key Blanks

35-100 5-Pin Obverse None 10 Days*

35-101 6-Pin Reverse End-user letter of authorization Numbered (Paracentric) indicating quantity, product and 10 Days 35-056 Control Quad key section Everest Conventional Key Blanks Everest C Family single sections None 35-002 DND Everest C Family multi-sections None 35-009 Standard Existing facility code, job name and job 5 Days35-003 Control location . End-user letter of authorization Everest D Family if shipping address is different than originally authorized .Classic Primus Key Blanks 35-157 Standard Primus Obverse35-157-XP Primus XP Obverse 5 Days35-158 Control Primus Quad35-158-XP Primus XP Quad

Everest Primus Key Blanks 35-004 Standard Everest C Family 35-004-XP Everest XP C Family35-005 Control Everest D Family 5 Days35-005-XP Everest XP D Family

* Applies to all sections except the following; 35-100 = C and E; 35-101 = C, CE, E, EF, and F; 35-056 = C, CE, E, EF, H, and J.

Notes: 1) Keyblanks (35-xxx) must be ordered in multiples of 50, except control keys. Cut keys can be ordered in any quantity. 2) Key stamping is not available, except DO NOT DUPLICATE per XQ06-878 for Classic conventional sections. 3) Longest lead-time prevails on orders with mixed lead-time product. 4) Lead-time refers to the time between when the order is booked and acknowledged by Schlage and the shipment of an order. Lead-times are subject to change.

•Level1:ExistingPrimusnumberand sequence number or section .•Level1+:ExistingPrimusnumber, sequence number or section and locksmith ID number .•Level2Sor2M:ExistingPrimusnumber and section .•Levels3and4:ExistingPrimusnumber, section and original signed Primus facesheet (faxed copies not allowed) .

•Level7:ExistingPrimusnumber,section and locksmith ID number .•Level8:ExistingPrimusnumber,facility code and section .•Level9:ExistingPrimusnumber,facility code, section and original signed Primus facesheet (faxed copies not allowed) .

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-26

KEYS & KEYING • QuicKey Program

QuicKey Product Availability and Order Requirements - SFIC Keys and Cores Available Typical Products Key Family Order Requirements Lead Time

Best Key Section Key Blanks 35-310 Best None 10 DaysEverest SFIC Key Blanks

35-401 Embossed Everest B Family 5 Days35-021 Unembossed

Everest SFIC Cut Keys 48-401 Embossed48-021 Unembossed49-401 Embossed master Everest B Family 5 Days49-021 Unembossed master49-356 Embossed control49-022 Unembossed control Everest SFIC Uncombinated Cores

80-036* Everest B Family 5 Days

Everest SFIC Combinated Cores 80-037* Everest B Family 5 Days

* Specify 606, 626 and 613 (simulated) finish. Uncombinated cores are furnished less keys, pins and springs.

Notes: 1) Keyblanks (35-xxx) must be ordered in multiples of 50, except control keys. Cut keys can be ordered in any quantity. 2) Longest lead-time prevails on orders with mixed lead-time product. 3) Lead-time refers to the time between when the order is booked and acknowledged by Schlage and the shipment of an order. Lead-times are subject to change.

Existing facility code, job name and joblocation . End-user letter of authorization ifshipping address is different than originallyauthorized .

Existing facility code, job name and joblocation . End-user letter of authorization ifshipping address is different than originallyauthorized .

Existing facility code, job name and joblocation . End-user letter of authorization ifshipping address is different than originallyauthorized .

Existing facility code, job name and joblocation . End-user letter of authorization ifshipping address is different than originallyauthorized .

SFIC Everest and Best Key Section Keys & Cores

Keys-27Price Book 74Effective March 4, 2013 • Rev. 3/13

SITEMASTER 200® • KEYS & KEYING

®

Key System Management Software Description Part Number Price EachWindows Full Version on CD SM01-287 $2,645.00Upgrade SiteMaster 3 .x Demo to Full Single User 50-280* 2,645.00Upgrade SiteMaster 3 .x Full Single User to Multi-User 50-281** 1,097.00 (Must have single user version to be able to upgrade)

Forms Description Part Number Price EachKey Record Form (order in multiples of 50) SM01-210 $0.36

Notes: 1) For complimentary demonstration software please contact your local SSC sales rep. or free download at www.schlage.com. 2) SiteMaster manuals have been replaced by an extensive help menu on the CD. 3) SiteMaster comes without any information loaded. The download file needs to be ordered (seeP/N50-123orderinginstructions)andSchlageisnotresponsibletoloadpersonnelinformation,etc.

Download Free Demonstration Softwareat www.schlage.com

* Requires end user contact name, address, phone, and email (not yahoo or hotmail) ** Require single user registration number.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-28

KEYS & KEYING Notes

Keys-29Price Book 74Effective March 4, 2013 • Rev. 3/13

LINEITEM QTY PRODUCT KEYWAY FINISH DESCRIPTION Lead Time NOTES

35-100 N/A Classic Key Blank 5 Pin * 10 Days 35-101 N/A Classic Key Blank 6 Pin 10 Days 35-056 N/A Classic Key Blank Control 10 Days 35-002 N/A Everest Conventional Do Not Duplicate 5 Days (Everest D requires Letter of Authorization) 35-009 N/A Everest Conventional Standard (Not available in Everest D) 5 Days 35-003 N/A Everest Conventional Control 5 Days (Everest D requires Letter of Authorization) 35-157 N/A Classic Primus Standard -Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-157-XP N/A Classic Primus XP Standard -Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-158 N/A Classic Primus Control-Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number, 5 Days Level 1+ requires primus number & Locksmith ID. 35-158-XP N/A Classic Primus XP Control-Levels 3 & 4 Requires Original Primus Face Sheet. Levels 1 & 2 requires Primus Number. 5 Days Level 1+ requires Primus number & locksmith ID. 35-004 N/A Everest Primus Standard-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number, Level 7 5 Days requires Primus number & locksmith ID. 35-004-XP N/A Everest Primus XP Standard-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number, Level 7 5 Days requires Primus number & locksmith ID. 35-005 N/A Everest Primus Control-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number. Level 7 requires 5 Days Primus number & locksmith ID. 35-005-XP N/A Everest Primus XP Control-Level 9 Requires Primus Original Face Sheet. Levels 8 Requires Primus Number. Level 7 5 Days requires Primus number & locksmith ID. 35-310 N/A Best Key Section Key Blanks 10 Days 35-401 N/A Everest B SFIC Key Blanks Embossed-Requires Letter of Authorization 5 Days 35-021 N/A Everest B SFIC Key Blanks Unembossed-Requires Letter of Authorization 5 Days 48-401 N/A Everest B SFIC Cut Key Embossed-Requires Letter of Authorization 5 Days 48-021 N/A Everest B SFIC Cut Key Unembossed-Requires Letter of Authorization 5 Days 49-401 N/A Everest Cut Key Embossed-Master--Requires Letter of Authorization 5 Days 49-022 N/A Everest Cut Key unembossed-Master--Requires Letter of Authorization 5 Days 49-356 N/A Everest Cut Key Embossed-Control--Requires Letter of Authorization 5 Days 49-022 N/A Everest Cut Key unembossed-Control--Requires Letter of Authorization 5 Days 80-036 Everest SFIC Uncombinated Cores-Requires Letter of Authorization Please provide keying schedule and master key summary form if 5 Days ordering master keyed products. 80-037 Everest SFIC Combinated Cores-Requires Letter of Authorization. Please provide keying schedule and master key summary form if 5 Days ordering master keyed products.

QUOTE# PRICE BOOK#

ACCOUNT NO. P.O. NUMBER

Fax: (800) 452-0665E-mail: Order Entry Schlage Commercial@irco.comMail: Schlage Order Entry 3899 Hancock Expressway Colorado Springs, CO 80911

DATE

SHIP TO:

SHIPPING INSTRUCTIONS QUICK KEY ORDER REQUESTED SHIP DATE

ORDER WRITTEN BY

NAME:

PHONE:

FAX:

Customer: #REF! P.O # Information

FOR MORE INFORMATION, CONTACT:

Keys-31Price Book 74Effective March 4, 2013 • Rev. 3/13

KEYS & KEYINGSample Letter of AuthorizationFor All Restricted Key Products

May 1, 2003

To: Schlage Dealer 100 East Avenue Dealer City, State 11111

RE: District 10, Jones Elementary School

Please consider this authorization to ship product for the above-referenced project .

Jones Elementary School is to be keyed using a new Everest D Restricted Key System . For security reasons, we would like to have all keys for this facility shipped to a location other than the job site . Master keyed products, however, can be shipped directly to the site . This letter authorizes Schlage to ship our restricted products to the following addresses:

Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores Attn: Building Project Manager District 10 Schools 555 Main Street End User City, State 55555

Master Keys, Change Keys, Control Keys, and Key Blanks Attn: Locksmith District 10 Lockshop 1201 Fifth Avenue End User City, State 55555

These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility . We understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to add, remove, or change authorized shipping locations .

Sincerely,

End User RepresentativeFacilities Manager

Date - REQUIRED

Facility Name - REQUIRED

Dealer Name - RECOMMENDED

Include Registry Number &

Facility Code (stamped on keys)

for existing key systems

Authorized Ship-To Addresses -

REQUIRED

End UserRepresentative

Signature -REQUIRED

Letter may be mailed or faxed to SchlageSchlage Restricted Order Processing

3899 Hancock ExpresswayColorado Springs, CO 80911

District 10 Schools 555 Main StreetEnd User City, State 55555(555) 555-5555

End UserLetterhead - REQUIRED

DISTRICT 10

Price Book 74Effective March 4, 2013 • Rev. 3/13

Keys-32

KEYS & KEYING • Primus Checklist

PRIMUS AND EVEREST PRIMUS ORDERING CHECKLIST

TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS

IMPORTANT NOTES

To expedite processing of all Primus orders, it is highly recommended that Primus products be ordered separately

For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise Specified

For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified

PRIMUS EVEREST PRIMUS

FOR LEVEL ONE 3 The Distributor’s Primus number MUST be provided3 The Sequence number MUST be provided

FOR LEVEL ONE PLUS

3 The Distributor’s Primus number MUST be provided3 The Sequence number MUST be provided3 The Locksmith number MUST be provided

FOR LEVEL TWO

3 The Dealer’s Primus number MUST be provided3 The Sequence number and/or Section MUST be Provided

FOR LEVELS THREE & FOUR

3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card3 An Original Facesheet MUST accompany all succeeding orders3 The Primus number MUST be indicated on the Facesheet3 ALL fields on the Facesheet MUST be completed where applicable

FOR LEVEL SEVEN

3 The Distributor’s Primus number MUST be provided3 The Locksmith’s Facility code MUST be provided3 The Keyway MUST be provided

FOR LEVEL EIGHT

3 The Distributor’s Primus number MUST be provided3 The Keyway MUST be provided

FOR LEVEL NINE

3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card3 An Original Primus Facesheet MUST accompany all succeeding orders3 The Primus number MUST be indicated on the Facesheet3 ALL fields on the Facesheet MUST be completed where applicable

All Primus Orders & Supporting Documentation Should be Sent To:Schlage

Attn: Primus Order Processing3899 Hancock Expressway

Colorado Springs, CO 80911

MA

ST

ER

KE

YE

D O

RD

ER

This

form

mus

t b

e at

tach

ed t

o th

e

MA

STE

R K

EY

SY

STE

M S

UM

MA

RY

FO

RM

Ple

ase

pro

vid

e as

com

ple

te a

nd a

ccur

ate

as p

ossi

ble

so

we

can

pro

vid

e w

hat

you

need

for

your

Key

Sys

tem

Exc

el S

oft

cop

y -

Prin

t In

stru

ctio

ns:

To a

void

prin

ting

mor

e sh

eets

tha

n ne

eded

, Sel

ect

<P

rint>

, fro

m t

he p

rint

scre

en s

elec

t <

Prin

t ra

nge>

, the

n se

lect

<

Pag

es>

from

___

to__

_& c

lick

OK

.

Quot

e #:

Acco

unt N

o.:

P.O.

#:

Ship

ping

Inst

ruct

ions

:M

ark

Cart

ons:

Date

:

Orde

r Writ

ten

By:

Cust

omer

Nam

e an

d Ad

dres

s:Sh

ip to

:

For F

urth

er In

form

atio

n Co

ntac

t:Na

me:

Phon

e:Fa

x:

Page

1 o

f ___

Item

s Or

dere

dOU

TSID

E

HAND

(O

nly

one

hand

per

lin

e ite

m)

INSI

DELA

TCH

STRI

KEEn

ter d

oor

thic

knes

s if

not

stan

dard

Ente

r w

hen

door

th

ickn

ess

is g

reat

er/

equa

l to

2˝

Dim

ensi

on

for m

ortis

e cy

linde

r,

bloc

king

rin

g, e

tc.

ADDI

TION

AL D

ETAI

LSLo

ck D

etai

lsDE

SIGN

FINI

SHDE

SIGN

FINI

SH

Key/

Labe

l Ins

truct

ions

QTY

Head

ing

DOOR

#KE

YSy

mbo

l(s)

MK

Sym

bol(s

)LI

NE IT

EMQT

YPR

ODUC

TDR

THK

EXT

DIM

Page

1 o

f ___

MS-

I100

Page

2 o

f ___

Item

s Or

dere

dOU

TSID

E

HAND

(O

nly

one

hand

per

lin

e ite

m)

INSI

DELA

TCH

STRI

KEEn

ter d

oor

thic

knes

s if

not

stan

dard

Ente

r w

hen

door

th

ickn

ess

is g

reat

er/

equa

l to

2˝

Dim

ensi

on

for m

ortis

e cy

linde

r,

bloc

king

rin

g, e

tc.

ADDI

TION

AL D

ETAI

LSLo

ck D

etai

lsDE

SIGN

FINI

SHDE

SIGN

FINI

SH

Key/

Labe

l Ins

truct

ions

QTY

Head

ing

DOOR

#KE

YSy

mbo

l(s)

MK

Sym

bol(s

)LI

NE IT

EMQT

YPR

ODUC

TDR

THK

EXT

DIM

Page

2 o

f ___

MS-

I150

1 of 5 MS-I200

MASTER KEYSYSTEM SUMMARY

This form must be attached to theMaster Key Order form and P.O.

Please provide as complete and accurate aspossible so we can provide what you need for

your Key System.

o New

o If Existing (provide info below)

Registry # __________________________________________

Structure or Factory Order # _____________________________________

o Attached Dealer Specified combinations

Construction Keyed Type o Yes o No

Full Size Construction Cores o ICA o ICB o ICC

(Schlage Only)

Small Format Construction Cores o Brown o Green

Construction Keyed

Falcon o CK (BOK) o Lost Ball

Schlage o CK (Split) o RCK ( 5-Pin C only )

Type

o 5-pin o 6-pin o 7-pinSee compatibility chart on page 5

Stamp Details

o With Industry Standard

o Non-standard Code (Specify)

Keyway Specify **: ____________________________________

Stamping Location

o Plug Face (N/A in Primus) - VKCo Concealed (N/A in Falcon STD) - CKC

** = The Commercial Master Key Department makes the final

decision in the selection of key sections

Select System

Falcon

oStandard

oSchlage C

oRestricted *

oInterchangeable Core A2

oInterchangeable Core A4

Schlage

oClassic

oClassic Primus *

oEverest 29 R Family-Small Format IC *

oEverest 29 S Family - Open

oEverest 29 T Family *

oEverest 29 Primus *

* = Attach required documentation

Job Name

AddressCity / State

Country

For detailed instructions on how to complete this form please refer to pages 4 & 5

1. System Overview

2. Cylinders

2 of 5 MS-I200

3. Keys

4. Key Quantities

Type

oStandard Bow oStandard Bow oAccess Bow oLarge Bow Unembossed (Schlage Only)

Stamp Details

oKeyset Symbol oDo Not Duplicate oWith Custom Die _________________________ (DND) (Specify)

Non-standard Code (Specify) ____________________________________________________________________________________

Change Key Packaging and Shipping InstructionsPack Keys Independently (PKI) of Lock or Cylinder ***

oYes oNo

If PKI, ship change keys to

oDealer oOther

oSee Primus Facesheet

Level Qty. Per Master Key Symbol (s) Total Quantity

GGM

GM

MK or RMK

Control

Emergency

Others

Special Function Qty. Per Qty. Per

RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only)

CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only)

Extractor Tools **** Small Format Construction Core Keys

Small Format Construction Core Control Keys

Change Keys

No. of Keys per Cylinder

No. of Keys per Symbol **** = Used with Construction Keying

*** = Furnished standard at no charge with split-key construction keying

3 of 5 MS-I200

5. Master Key Future Expansion

6. Operating Instructions(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)

List Future MK Symbols

Example:MK………………… oBJ, BK o40 each

GGM o o

GM o o

MK o o

MK o o

MK o o

MK o o

Others o o

Cross Keyed is operated by Cylinder these change keys

X

X

X

X

X

X

X

X

X

X

X

X

Cross Keyed is operated by Cylinder these change keys

X

X

X

X

X

X

X

X

X

X

X

X

Approx. # of Change Key Symbols Under Each Future MK

3 3

4 of 5 MS-I200

7. Instructions and Compatibility

General Information

If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer Service prior to placing the order:Tel. 1-877-671-7011Fax 1-800-452-0663

• Only one structure may be ordered on the same purchase order • Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families • Classic Primus refers to Primus Obverse and Primus Quad key section families

Section 1: System Overview

Full Size Construction Cores • Schlage only

Small Format Construction Cores • 7-pin only for Schlage • 6- and 7-pin for Falcon

CK (Split) • 6-pin for Schlage and Falcon • Split key construction keying is not available for Classic Primus or Everest 29 Primus

RCK (Lost Ball) • 5-pin (C keyway) only for Schlage • 5-, 6-, and 7-pin for Falcon

System Selection • Refer to the compatibility chart

Section 2: Cylinders

Type • For cylinder type refer to the compatibility chart

Keyway (specify) • Schlage Commercial’s default key section for new Master Key Systems is Everest 29 S 145

Section 3: Keys

Stamp Details • Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys • For custom die, attach RFQ approval for Schlage

5 of 5 MS-I200

Section 4: Key Quantities

Level • Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems)

Special Function • Construction keys are not furnished unless specified

Change Keys • Unless otherwise specified 2 change keys are furnished per lock or cylinder

Section 5: Master Key Future Expansion • Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols

Section 6: Operating Instructions • Cross keying reduces the security and expansion of key systems • Unless otherwise specified, keyin master keys will operate cross-keyed cylinders

5 Pin 6 Pin 7 PinSplit

KeyBlock O-Key

Lost Ball

Tempe Core

A2 A4 0.025 0.018

Schlage

Classic X X X X X

Everest 29 S X X X

Everest 29 T X X X

Everest 29 R X X X

Classic Primus (XP) X X

Everest 29 Primus (XP) X X

Falcon

Open X X X X X X

Restricted X X X X X

Schlage C X X

SFIC Open X X X X X

SFIC Restricted X X X X X

Compatibility Chart

IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:

29

MS-E120

© 2009 Ingersoll RandMS-E120 Rev. 6/09

Ingersoll Rand Security Technologies

Schlage

Attn.: Primus Order Processing

3899 Hancock Expressway

Security, CO. 80911

PRIMUS SECURITY LEVEL:

PROJECT INFORMA TION

Project Name (please print or type)

Street Address (no P .O. Box)

City State Zip Code

AUTHORIZED OWNER SIGNA TURE(S): If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authorit y able to control other signers on this form.

1.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

2.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

3.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

4.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

5.

Name (please print or type) Street (no P .O. Box)

Title or Position City State Zip Code

Signature Date Phone Number

Level 3, 4, and 9 Order Authorization

Signature Card PRIMUS ®

THIS SIGNA TURE CARD EST ABLISHES AUTHORIZA TION TO PURCHASE ADDITIONAL PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED A T THE ADDRESS BELOW .

— OVER —

For Internal Use Only

Primus# Order#

G/Z/E S/M

THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER – F AXED COPIES NOT ACCEPT ABLE –

3U (no exclusivity) 4Z (time exclusivity)

3G (2-digit zip exclusivity) 4N (nationwide exclusivity)

C l a s s i c K e y w a y s

9U (no exclusivity) 9Z (time exclusivity)

9G (2-digit zip exclusivity) 9N (nationwide exclusivity)

E v e r e s t 2 9 K e y w a y s

MS-E130

DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)

Dealer or Locksmith Account # Primus #

Dealer or Locksmith Company Name

Phone Number Fax Number

Contact 1 (Please print or type)

Contact 1 Signature

Owners Authorization By (Please print or type)

SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signatureauthorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibilityfor validating the owner’s signature as identified on the Primus Signature Card before orderingthe material.

SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasingadditional Primus product or duplicating keys.

Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letterrequesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributorsand Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax ofthis card will not be accepted.

Please mail the original copy to: IR SchlageAttn.: Master Key Control Department2315 Briargate Parkway, Suite 700Colorado Springs, CO 80920

– FAXED COPIES WILL NOT BE ACCEPTED –

© 2002 Ingersoll-RandMS-E130 Rev. 8/05

Effective From:Date Date

to

Owners Authorization Signature Date

Address (no P.O. Box)

Contact 2 (Please print or type)

Contact 2 Signature

City State Zip Code

Schlage Attn: Master Key Control Department

3899 Hancock ExpresswayColorado Springs, CO 80911

PS-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Table of Contents

PL Series Cross Reference PS-3Key-In-Knob with Cylinder PS-4 Keyed Different . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-4 Chain Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-4Key-In-Knob Less Cylinder PS-5SFIC Less Cylinder PS-6Full Size IC Core PS-7 Less Cylinder - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-7Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks PS-8Parts and Accessories PS-9Flex Security PS-12 Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-12 Security Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-13 Security Cables and Locking Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-13 Hasps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-14

Introduction Portable Security

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-2

Introduction

Standard Features for Commercial Series PadlocksCertification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and corrosion resistance Lock Body Solid steel, brass and chrome plated brass - Solid steel resists impact, solid brass and chrome plated brass resist corrosion Shackle Hardened alloy steel, double deadbolt locking mechanismCylinder* Conventional Key-In-Knob, 6-pin solid brass, pinned 5, C keyway, keyed different (KD) unless otherwise specified Cylinder Finish 606 Satin Brass Keys Two nickel silver cut keys per lock, branded Schlage * Cylinders must be ordered as a separate line item for all products except conventional key in knob KD stocked.

Important Portable Security Ordering InformationAll products in this section are stocked and must be ordered in case quantities . Case quantity is listed with each product . All prices listed are unit prices . Note: All cylinders will ship separately.

Standard Features for Commercial Series CablesLock Head Die-cast zinc, 407 satin finish Cable Braided steel vinyl coated for greater cut resistance than twisted cables Cylinder* Conventional Key-In-Knob , 6-pin solid brass, pinned 5, C keyway, keyed different (KD) Cylinder Finish 606 Satin Brass Keys Two nickel silver cut keys per lock, branded Schlage * Cylinders must be ordered as a separate line item for all products except conventional key in knob KD stocked.

Standard Features for Commercial Series ChainsCertification Padlock meets or exceeds ASTM standards for tensile force, shock, shackle cutting, cycle test and corrosion Padlock* Recommended for use with KS72F2300 - Round style padlock with 2” shackle Lock Body 2 5/8” Solid steel resists impact Shackle Molybdenum hardened steel, patented interchangeable design, double deadbolt locking mechanism Cylinder Conventional Key-In-Knob , 6-pin solid brass, pinned 5, C keyway, keyed different (KD) Cylinder Finish 606 Satin Brass Keys Two nickel silver cut keys per lock, branded Schlage Chain Triple heat treated Boron Manganese steel; unique six-sided chain links resist attack * Padlocks and chains must be ordered separately.

Portable Security

PS-3Price Book 74Effective March 4, 2013 • Rev. 3/13

PL Series - Discontinued Body Size Shackle Dimension Shackle Dimension (metric)

CylinderPart # Width Height Depth A B C A B C Type

PL1001J 1 1/8” 29mm PL1002J 1 3/4” 2 1/8” 3/4” 5/16” 2” 3/4” 8mm 51mm 19mm KNKPL1003J 3” 76mm PL2001J 1 1/8” 29mm PL2002J 2” 2 1/8” 3/4” 3/8” 2” 3/4” 9.5mm 51mm 19mm KNKPL2003J 3” 76mm PL3001J 2 1/4” 2 3/8”

7/8” 7/16” 1 1/8” 5/16” 11mm 29mm 24mm KNKPL3002J 2” 51mm PL4001J 1 1/8” 29mm PL4002J 2” 2 1/4” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm ICPL4003J 3” 76mm

PL Series Cross Reference • Portable Security

PL Part #/KS Part # PL Series Part # KS Series Part # PL1001J KS23D2200 PL1002J KS23F2200 PL1003J KS23F2200 PL2001J KS43D2200 PL2002J KS43F2200 PL2003J KS43F2200 PL3001J KS43D2200 PL3002J KS43F2200 PL4001J KS43D3200 PL4002J KS43F3200 PL4003J KS43F3200

KS Series - Replacement Body Size Shackle Dimension Shackle Dimension (metric)

CylinderPart # Width Height Depth A B C A B C TypeKS23D2200 1 1/2” 38mm KS23F2200 1 25/32” 2 3/16” 7/8” 5/16” 2” 3/4” 8mm 51mm 19mm KNK KS43D2200 1 1/2” 38mm KS43F2200 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm KNKKS43D3200 1 1/2” 38mm KS43F3200 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm IC

Shackle Dimensions

NOTES: 1) Padlocks must be ordered and are shipped less cylinder

– Keys & Keying must appear as a separate line item

2) Reference Schlage Keys & Keying section for specific opitions and cylinders

– All Key & Keying adders and deducts apply

3) Key retaining cams for Classic KNK padlocks - KZ32CB1 - ordered as separate line item and ships separately

4) Key retaining is not an option on Full Size IC products

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-4

Shackle Dimensions

Body Size ShackleShackle Dimension Dimension (metric) List UPC Part # Width Height Depth A B C A B C Cylinder Case Master Price 720018- Type Pack Pack Each KEYED DIFFERENT - BRASS 997412 KS23D2300 1 25/32” 2 3/16” 7/8” 5/16” 1 1/2” 3/4” 8mm 38mm 19mm KNK 6 24 $51.60 997405 KS23F2300 1 25/32” 2 3/16” 7/8” 5/16” 2” 3/4” 8mm 51mm 19mm KNK 6 24 51.80 997290 KS43D2300 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm KNK 6 24 54.90 997283 KS43F2300 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm KNK 6 24 55.20 KEYED DIFFERENT - STEEL 997764 KS72F2300 2 5/8˝ 2 3/8˝ 1 3/32˝ 7/16˝ 2˝ 7/8˝ 11mm 51mm 22mm KNK 6 18 $59.40 NOTES: 1) Ships with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder padlocks from page PS-5 and cylinders separately. 2) For Custom Engraving, see page PS-8.

20 Series

3/4” 1 1/2” 2“ 4“ KS23D

40 Series

3/4” 1 1/2” 2“ 4“ KS43F

Keyed Different - Key-In-Knob Portable Security • Key-in-Knob with Cylinder

Round Series

2” 1” KS72F KC Series KK Series

Available in:606 Brass

Available in:652 Steel

Locking Head is 407 Satin Finish

Padlock is 652 Steel

Cable Size Cable Size (metric) List UPC Cylinder Case Master Price 720018- Part # Length Diameter Length Diameter Type Pack Pack EachKEYED DIFFERENT 997719 KC215E220 6’ 5/8” 182cm 15mm KNK 1 5 $79.80

NOTES: 3) Ships with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder padlocks from page PS-5 and cylinders separately.

NOTE: 5) For master keyed or keyed alike product, order chain, padlocks and cylinders separately. Order chains #999478 or #999461 with padlock KS72F2300. Prices are for chains only. Chains and Padlocks must be ordered separately.

Chain Size Chain Size Shackle Dimension Shackle Dimension (metric) (metric) List UPC Part # Length Length A B C A B C Cylinder Case Master Price 720018 - Type Pack Pack Each CHAIN ONLY 999478 999478 5’ 150 cm N/A N/A N/A 1 1 $77.60 999461 999461 3’´ 3” 100 cm N/A N/A N/A 1 1 41.10

PS-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Key-in-Knob Less Cylinder • Portable Security Key-In-Knob Less Cylinder

NOTE: 1) Key in Knob less cylinder padlocks ship with key stop, cylinder housing, and cylinder housing screw. 2) For cylinder and keying options, refer to Cylinders and Keys & Keying sections. 3) For customer engraving, see page PS-8.

20 Series

3/4” 1 1/2” 2“ 4“ KS23D

40 Series

3/4” 1 1/2” 2“ 4“ KS43F

Available in 606 Brass

Body Size Shackle Shackle Dimension Dimension (metric) List UPC Part # Width Height Depth A B C A B C Cylinder Case Master Price 720018- Type Pack Pack Each LESS CYLINDER1 - BRASS 000259 KS23D2200 1 25/32” 2 3/16” 7/8” 5/16” 1 1/2” 3/4” 8mm 38mm 19mm KNK 6 24 $43.10 000266 KS23F2200 1 25/32” 2 3/16” 7/8” 5/16” 2” 3/4” 8mm 51mm 19mm KNK 6 24 43.30 000297 KS43D2200 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm KNK 6 24 46.30 000303 KS43F2200 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm KNK 6 24 46.60

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-6

Portable Security • SFIC - Less Cylinder Less Cylinder - SFIC

20 Series

3/4” 1 1/2” 2“ 4“ KS21F

Body Size Shackle Shackle Dimension Dimension (metric) List UPC Part # Width Height Depth A B C A B C Cylinder Case Master Price 720018- Type Pack Pack Each LESS CYLINDER - CHROME PLATED BRASS 997658 KS11D1200 1 25/32” 2 3/16” 7/8” 1/4” 1 1/2” 3/4” 6.4mm 38mm 19mm SFIC 6 24 $25.70 997641 KS11F1200 1 25/32” 2 3/16” 7/8˝ 1/4” 2” 3/4” 6.4mm 51mm 19mm SFIC 6 24 26.70 997498 KS21D1200 1 25/32” 2 3/16” 7/8” 5/16” 1 1/2” 3/4” 8mm 38mm 19mm SFIC 6 24 27.20 997481 KS21F1200 1 25/32” 2 3/16” 7/8” 5/16” 2” 3/4” 8mm 51mm 19mm SFIC 6 24 28.50 997375 KS41D1200 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm SFIC 6 24 27.20 997368 KS41F1200 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm SFIC 6 24 28.50

NOTES: 1) Product is shipped without cylinder. For cylinder and keying options, refer to Cylinders and Keys and Keying sections. 2) For Custom Engraving, see page PS-8.

KC Series

20 Series

3/4” 1 1/2” 2“ 4“ KS23D

Cable Size Cable Size (metric) List UPC Cylinder Case Master Price 720018- Part # Length Diameter Length Diameter Type Pack Pack EachLESS CYLINDER - SMALL FORMAT INTERCHANGEABLE CORE 998747 KC215A130 2’ 5/8” 60cm 15mm SFIC 1 5 $51.60 998754 KC215B130 4’ 5/8” 121cm 15mm SFIC 1 5 55.30

NOTEs: 3) Key in Knob cables less cylinder ship with key stop, cylinder housing and cylinder housing screw.

4) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.

Available in 625 Chrome Plated Brass

Locking Head is 407 Satin Finish

PS-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size IC Core • Portable Security Less Cylinder - IC Core

40 Series

3/4” 1 1/2” 2“ 4“ KS43F

40 Series

3/4” 1 1/2” 2“ 4“ KS43D

Body Size Shackle Shackle Dimension Dimension (metric) List UPC Part # Width Height Depth A B C A B C Cylinder Case Master Price 720018- Type Pack Pack Each LESS CYLINDER - BRASS 999140 KS43D3200 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm IC 6 24 $53.40 999157 KS43F3200 1 15/16” 2 3/16” 7/8” 3/8” 2” 3/4” 9.5mm 51mm 19mm IC 6 24 55.60

NOTES: 1) For cylinder and keying options, refer to Cylinders and Keys and Keying sections. 2) For Custom Engraving, see page PS-8.

Available in 606 Brass

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-8

Portable Security • Locking Cables, Security Chains and Padlocks

Custom engraving is available on the following parts. Brass Padlocks - Listed on page KS23D2300 KS23F2300 PS-4 KS43D2300 KS43F2300 KS23D2200 KS23F2200 PS-5 KS43D2200 KS43F2200 KS43D3200

PS-7 KS43F3200

Chrome Plated Brass Padlocks - Listed on page KS11D1200 KS11F1200 KS21D1200 PS-6 KS21F1200 KS41D1200 KS41F1200

NOTES: 1) A one time set up cost of $85 net will be added to the first order under part number 50-020.

2) A $2 net per piece engraving fee will be added to net product cost.

3) Custom engraving requires submission of completed “Custom Logo Request” form (see Forms) and scaleable logo line art in DXF format to TSSEC@irco.com.

4) Minimum order quantity is 6.

5) XKS-000-XXX part number is assigned by Technical Services and is keyed in the accessory field as part of the product part number.

Custom Engraving - OptionalKSxxxxx XKS-000-xxx

CLR Assigned Number per Technical ServicesBrass Padlock/Chrome Plated Brass Padlock Stock

Stocked Parts and Accessories • Portable Security

FEATURES & SPECIFICATIONS•Mustbeorderedinboxquantity•Replacementpartsandaccessoriesdiscountedat full lock discount

List UPC Part # Description Box Carton Price 720018- Quantity Quantity Each SERvICE REPAIR KIT - PADLOCK & CABLES - CONvENTIONAL KEY-IN-KNOB & SFIC 997818 KZ390AL Service Repair Kit — Includes 10 of each part below except KZ35AC1, KZ35AC2, 1 6 $386.00 KZ36EB0-Qty20;KZ37000-Qty1 and also includes pliers PADLOCK PARTS - CONvENTIONAL KEY-IN-KNOB 998204 KZ32CB1 KeyRetainingLockingCam,10,20,40,80,90Series 30 240 $2.00 998211 KZ32CB2 KeyRetainingLockingCam,70Series 30 240 2.00 997788 KZ32DA0 Driver 30 240 2.90 PADLOCK PARTS - SFIC 998259 KZ31CB1 KeyRetainingLockingCam,10,20,40,80,90Series 30 240 $1.10 998266 KZ31CB2 KeyRetainingLockingCam,70Series 30 240 1.10 998303 KZ31DA0 ThrowMember 30 240 2.30 ACCESSORIES 997900* KZ200AL 9” Nickel Plated Steel Retaining Chain 6 36 $6.60

* Fits shackles diameters 1/4” - 3/8”.

PS-9Price Book 74EffectiveMarch4,2013•Rev.3/13

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-10

Portable Security • Parts and Accessories

40 Series Shackles

3/4” 1 1/2” 2“ 4“

40 Series Shackles

3/4” 1 1/2” 2“ 4“3/8” x 3/4” 5/16” x 2” 1/4” x 4”

40 Series Shackles

3/4” 1 1/2” 2“ 4“

Shackle Dimension Shackle Dimension (metric) List UPC Part # A B C A B C Box Carton Price 720018- Quantity Quantity Each HARDENED STEEL SHACKLES - FOR USE WITH 10 SERIES PADLOCKS 997214 KZ11A10 1/4” 3/4” 3/4” 6.4mm 19mm 19mm 6 36 $4.30 997184 KZ11D10 1/4” 1 1/2” 3/4” 6.4mm 38mm 19mm 6 36 5.30 997153 KZ11F10 1/4” 2” 3/4” 6.4mm 51mm 19mm 6 36 5.40 997122 KZ11G10 1/4” 4” 3/4” 6.4mm 102mm 19mm 6 36 7.50 HARDENED STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS 997207 KZ11A20 5/16” 3/4” 3/4” 8mm 19mm 19mm 6 36 $5.30 997177 KZ11D20 5/16” 1 1/2” 3/4” 8mm 38mm 19mm 6 36 6.50 997146 KZ11F20 5/16” 2” 3/4” 8mm 51mm 19mm 6 36 6.80 997115 KZ11G20 5/16” 4” 3/4” 8mm 102mm 19mm 6 36 9.50 HARDENED STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS 997191 KZ11A40 3/8” 3/4” 3/4” 9.5mm 19mm 19mm 6 36 $6.60 997160 KZ11D40 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm 6 36 8.20 997139 KZ11F40 3/8” 2” 3/4” 9.5mm 51mm 19mm 6 36 8.50 997108 KZ11G40 3/8” 4” 3/4” 9.5mm 102mm 19mm 6 36 11.70 BRASS SHACKLES - FOR USE WITH 10 SERIES PADLOCKS 997092 KZ12A10 1/4” 3/4” 3/4” 6.4mm 19mm 19mm 6 36 $4.30 997061 KZ12D10 1/4” 1 1/2” 3/4” 6.4mm 38mm 19mm 6 36 5.30 997030 KZ12F10 1/4” 2” 3/4” 6.4mm 51mm 19mm 6 36 5.40 997009 KZ12G10 1/4” 4” 3/4” 6.4mm 102mm 19mm 6 36 7.50 BRASS SHACKLES - FOR USE WITH 20 SERIES PADLOCKS 997085 KZ12A20 5/16” 3/4” 3/4” 8mm 19mm 19mm 6 36 $4.20 997054 KZ12D20 5/16” 1 1/2” 3/4” 8mm 38mm 19mm 6 36 6.50 997023 KZ12F20 5/16” 2” 3/4” 8mm 51mm 19mm 6 36 6.70 996996 KZ12G20 5/16” 4” 3/4” 8mm 102mm 19mm 6 36 9.50 BRASS SHACKLES - FOR USE WITH 40 SERIES PADLOCKS 997078 KZ12A40 3/8” 3/4” 3/4” 9.5mm 19mm 19mm 6 36 $6.60 997047 KZ12D40 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm 6 36 8.20 997016 KZ12F40 3/8” 2” 3/4” 9.5mm 51mm 19mm 6 36 8.50 996989 KZ12G40 3/8” 4” 3/4” 9.5mm 102mm 19mm 6 36 11.70

Shackle Dimensions

FEATURES & SPECIFICATIONS•PartsandAccessoriesdiscountedatfulllockdiscount.•Mustbeorderedinboxquantity.

PS-11Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts and Accessories • Portable Security Replacement Parts

List UPC Part # Description Box Carton Price 720018- Quantity Quantity Each PADLOCK PARTS - CONvENTIONAL KEY-IN-KNOB & SFIC 997801 KZ35AA1 Shackle Spring, 10 Series 30 240 $0.42 997795 KZ35AA2 Shackle Spring, 20, 80 Series 30 240 0.42 996972 KZ35AA3 Shackle Spring, 40, 90 Series 30 240 0.42 996965 KZ35AA4 Shackle Spring, 70 Series 30 240 0.42 996958 KZ35AB1 ShackleMountingScrew,10,20,40Series 30 240 1.10 997771 KZ35AB2 ShackleMountingScrew,70,80,90Series 30 240 1.10 997894 KZ35AC1 Locking Ball Bearing, 10, 20, 40, 80, 90 Series 30 240 0.94 998136 KZ35AC2 Locking Ball Bearing, 70 Series 30 240 1.20 998419 KZ35EC1 Bumper, 10, 20 Series 30 240 0.62 998426 KZ35EC2 Bumper, 40 Series 30 240 0.62 998402 KZ35EC3 Bumper, 80 Series 30 240 0.62 998396 KZ35EC4 Bumper, 90 Series 30 240 0.62 PADLOCK PARTS - CONvENTIONAL KEY-IN-KNOB 998167 KZ32BB0 CylinderHousingScrew 30 240 $0.90 998174 KZ32CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 2.00 998198 KZ32CA2 Locking Cam, 70 Series 30 240 2.00 998228 KZ32CC0 KeyStop 30 240 0.42 PADLOCK & CABLE PARTS - CONvENTIONAL KEY-IN-KNOB 998143 KZ38BA1* CylinderHousing,20,40,70,80,90,KCSeries 20 160 $7.00 998150 KZ38BA2* CylinderHousing,10,KCSeries 20 160 7.00 PADLOCK PARTS - SFIC 998235 KZ31CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $2.00 998242 KZ31CA2 Locking Cam, 70 Series 30 240 2.00 998273 KZ31CC1 Steel Retainer Plate, 10, 20, 40, 80, 90 Series 30 240 1.10 998280 KZ31CC2 Steel Retainer Plate, 70 Series 30 240 1.10 998297 KZ31CD0 Steel Retainer Plate Screw 30 240 1.40 998433 KZ37000 Installation Tool 6 36 3.00 CABLE PARTS 998358 KZ33CA0 ThrowMember,SFIC 30 240 $4.40 998327 KZ33DB0 Washer,Key-In-Knob/SFIC 30 240 0.42 998334 KZ33DC0 DriverMountingScrew,Key-In-Knob 30 240 1.10 998440 KZ34CA0 CylinderCap,Key-In-Knob 30 240 1.70 998365 KZ34DA0 Driver,Key-In-Knob 30 240 2.10 998341 KZ34DC0 ThrowMemberMountingScrew,SFIC 30 240 1.10 997665 KZ34ED0 CylinderCapPin,Key-In-Knob 30 240 0.64 998372 KZ36EA0 DustCover,Key-In-Knob/SFIC 30 240 2.20 998389 KZ36EB0 DustCoverScrew,Key-In-Knob/SFIC 30 240 0.64

*CableseriescanuseeitherCylinderHousingpartKZ38BA1orKZ38BA2.

FEATURES & SPECIFICATIONS•Mustbeorderedinboxquantity•Replacementpartsandaccessoriesdiscountedat full lock discount•Whilesupplieslast

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-12

Portable Security • Flex Security Padlocks

999232 855156

Shackle Dimensions

FLEX SECURITY FEATURES & SPECIFICATIONS•Nonrekeyable•Retailvis-packed •Mustbeorderedincasequantitymultiples

Special Use Padlocks Shackle Dimension Shackle Dimension (metric) Padlock Case Price UPC Part Number A B C A B C Width Qty. EachExtra Large Padlock 720018999232 999232 1/2” 11” 4” 12mm 275mm 102mm 7 1/4” 5 $31.30Shackle-less Padlock 720018855156 855156 – – – – – – 2 7/8” 6 $39.40

Covered Laminated Steel Padlocks Part Shackle Dimension Padlock Case Price UPC Number A B C Width Qty. Each Covered Laminated Steel Padlocks 720018850410* 850410 * 1/4” 1 1/8” 3/4” 1 1/2” 3 $21.50

* 2 KA units per pack. 6 Packs keyed different per case.

850410

PS-13Price Book 74Effective March 4, 2013 • Rev. 3/13

Flex Security • Portable Security Security Chains,Security Cables & Locking Cables

Loop Dimensions

820406 999263 999270 999249 999256

999218 999225 994800994862

Link Dimensions

999461999478

999201

FLEX SECURITY FEATURES & SPECIFICATIONS•Nonrekeyable•Retailvis-packed •Mustbeorderedin casequantitymultiples

Security Chains Part Link Dimension Chain Case Price UPC Number A Length Qty. EachCinch Ring Security Chains 720018999478 999478 1/2” 5’ 1 $77.60 720018999461 999461 1/2” 3’ 3” 1 41.10

Security Cables and Locking Cables Part Cable Dia. Loop Dimension Cable Case Price Number A B C Length Qty. EachHeavy Duty Locking Cable - Schlage Rekeyable 720018999201 999201 5/8” – – 6’ 5 $57.70Heavy Duty Flexible Steel Cables 720018820406 820406 5/8” 3 3/8” 1 5/8” 7’ 5 $35.50Flexible Steel Cables 720018999270 999270 3/8” 2 1/4” 1 1/8” 30’ 4 $45.30 720018999263 999263 3/8” 2 1/4” 1 1/8” 15’ 4 28.20 720018999256 999256 3/8” 2 1/4” 1 1/8” 7’ 4 16.70 720018999249 999249 3/8” 2 1/4” 1 1/8” 4’ 4 13.00Key Cable 720018999218 999218 1/2” – – 5’ 4 $23.80Resettable Combination Cable 720018999225 999225 3/8” – – 5’ 4 $24.80Flexible Steel Cable and Covered Laminated Steel Padlock 720018994800 994800 3/8” 2 1/4” 1 1/8” 4’ 4 $22.40 720018994862 994862 3/8” 2 1/4” 1 1/8” 15’ 4 35.20

Price Book 74Effective March 4, 2013 • Rev. 3/13

PS-14

HaspsPortable Security • Flex Security

855101 855118 855125 855132

855149 994848 FLEX SECURITY FEATURES & SPECIFICATIONS•Nonrekeyable•Retailvis-packed •Mustbeorderedincasequantitymultiples

Hasps Locking Case UPC Part Number Body Dimension Eye Dia. Qty. Price EachSecurity Hasps 720018855101 855101 8 1/2” x 4 1/2” 5/8” 3 $32.30 720018855118 855118 7 3/4” x 1 3/4” 1/2” 6 10.20 720018855125 855125 5” x 2” 1/2” 6 9.90 720018855132 855132 4 1/4” x 1 5/8” 9/16” 6 11.30 720018855149 855149 7 1/4” x 1 5/8” 9/16” 6 10.20 720018994848 994848 4 1/2” x 1 5/8 1/2” 6 5.30

Shackle Dimensions

CL-1Price Book 74Effective March 4, 2013 • Rev. 3/13

CL

Table of ContentsComplete Locks CL-2 CL-Series: Conventional Offering . . . . . . CL-2 CL-Series: Full Size Interchangeable Core Offering . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-3 CL-Series: Small Format Interchangeable Core Offering . . . . . . . . . CL-4Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .CL-5 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-5 Non-Standard Door Thickness . . . . . . . CL-5 Special Locks . . . . . . . . . . . . . . . . . . . . . CL-5Parts CL-6 Trim Collars . . . . . . . . . . . . . . . . . . . . . . CL-6 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . CL-6 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6 Drivers and Accessories . . . . . . . . . . . . . CL-7 Cam Options . . . . . . . . . . . . . . . . . . . . . . CL-7 Ratchet Lock Accessories . . . . . . . . . . . . CL-7 Trim Collar Options . . . . . . . . . . . . . . . . . . CL-7Complete Cylinders See Cylinders SectionHow To Order Forms & Examples

Introduction

Product Identification CL 100 PB

Cylinder Suffix PB = 6-Pin Cylinder R = Full Size Interchangeable Coe G = Everest 29 Patented SFIC

Function (See examples below) 100 = Door Lock 154 = Primus® UL437 Listed Door Lock 174 = Primus® Controlled Access Door Lock 200 = Drawer Lock 254 = Primus® UL437 Listed Drawer Lock 274 = Primus® Controlled Access Drawer Lock

Lock Series

Finish Codesand DescriptionsCode Description605 (US 3) Bright Brass626 (US 26D) Satin Chromium Plated

Standard Features*Certification ANSI A156.11, 1996, Series 4000, Grade 2Bar CL100-Series 1” throw; CL200-Series 3/4” throwStrike 1/2” Bar strike and 1/4” bar strikeCylinder*** 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)**Door Range Spacers and strikes will accommodate doors 7/8”, 1”, and 1 1/8” thickKeys Two nickel silver cut keys per lock, 6-pin, S123 section**

* Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified. *** For default keyway please see page Terms-16.

Price Book 74Effective March 4, 2013 • Rev. 3/13

CL-2

Conventional OfferingCL • Complete Locks

CL100PB CL200PB

CL-Series Finishes 605 Function Description 626KeyedCL100PB Door cabinet lock, 6-pin cylinder, 1” bolt throw CL200PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw $108.00

Notes: 1) Keying options: see Keys & Keying. 2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 3) Primus locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified. 4) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $13.00 per cylinder. 5) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

CL-Series: Primus XP/ Primus Controlled AccessPrimus cylinders are offered for sale through specific channels of distribution based on security levels See Terms & Conditions for more information. Finishes 605 Function Description 626KeyedCL174PB Door cabinet lock, 6-pin cylinder, 1” bolt throwCL174PB-XP Door cabinet lock, 6-pin cylinder, 1” bolt throw

$126.00

CL274PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw CL274PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw

CL-Series: Primus XP/ Primus High Security UL 437Primus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information. Finishes 605 Function Description 626KeyedCL154PB Door cabinet lock, 6-pin cylinder, 1” bolt throwCL154PB-XP Door cabinet lock, 6-pin cylinder, 1” bolt throw CL254PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw $146.00

CL254PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw

CL-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Complete Locks • CLFull Size Removable Core Offering

CL-Series: Full-Size Interchangeable Core Finishes Function Description 605 626KeyedCL777R Door cabinet lock, FSIC, 1” bolt throw CL888R Drawer cabinet lock, FSIC, 3/4” bolt throw $132.00

CL920R FSIC Cam Lock $102.00

CL-Series: Full-Size Interchangeable Core Primus XP/ Primus Controlled Access Finishes Function Description 605 626KeyedCL774R Door cabinet lock, FSIC, 1” bolt throw CL774R-XP Door cabinet lock, FSIC, 1” bolt throw CL874R Drawer cabinet lock, FSIC, 3/4” bolt throw $142.00

CL874R-XP Drawer cabinet lock, FSIC, 3/4” bolt throwCL974R FSIC Cam Lock $121.00CL974R-XP FSIC Cam Lock

Notes: 1) Keying options: see Keys & Keying. 2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 3) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $13.00 per cylinder. 4) For restricted Everest 29 T family keyways add $12.00 per cylinder. This does not apply to Primus families. See Terms and Conditions for more information.

CL-Series: Full Size Interchangeable Core Ratchet Lock Finishes Function Description 626KeyedCL929R Ratchet Lock, FSIC $130.00

CL777R CL888R CL920R

Full Size Interchangeable Core Option Description Specify PriceFull Size Construction Core * T suffix Example: N/CLess Full Size Core J suffix Example: Deduct $25.00 from lock price

* Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying .

CL • Complete Locks Small Format Interchangeable Core Offering

Price Book 74Effective March 4, 2013 • Rev. 3/13

CL-4

CL-Series: Everest Restricted Small Format Interchangeable Core Finishes Function Description 626KeyedCL721G Door cabinet lock, SFIC, 1” bolt throw CL771G Drawer cabinet lock, SFIC, 3/4” bolt throw CL725G Everest Patented SFIC Rim Latch Lock $103.00

CL775G Everest Patented SFIC Rim Deadbolt Lock

CL-Series: Everest Restricted Small Format Interchangeable Core Finishes 605 Function Description 626KeyedCL720G Everest Patented SFIC Cam Lock $97.00CL728G Everest Patented SFIC Mail Box Lock 80.00 CL729G Everest Patented SFIC Ratchet Lock 131.00

CL721G CL771G CL725G CL775G

CL720G CL728G CL729G

Note: 1) For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details. 2) Please refer to Everest small format interchangeable core key control policies, under the Terms & Condition Section. 3) For restricted Everest 29 R SFIC keyways add $3.20 per core. See Terms and Conditions for more information.

CL-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Options • CLStrikes, Non-Standard Door Thickness,Special Locks

CL10-355 CL10-354

Strikes Add to Description Specify Lock Price Bar strike, 3/4” x 1 31/32” x 1/2”, standard CL10-355 N/C Bar strike, 3/4” x 1 31/32” x 1/4”, standard CL10-354

Non-Standard Door Thickness Add to Description Specify Lock PriceLock for 1 3/8” door 1 3/8” door thickness - for CL door and drawer locks $2.30

Shaded items are standard components and arefurnished with locks unless otherwise specified.

Special Locks6 Extended Factory Lead Time Not subject to standard discount terms PriceFunction Description EachXB03-232 Cabinet Lock for doors 1/8” to 3/4” thick $302.00XB03-232P Primus Cabinet Lock for doors 1/8” to 3/4” thick 302.00XB06-530 Cabinet Lock for doors over 7/8” to 2” thick 364.00XB06-530P Primus Cabinet Lock for doors over 7/8” to 2” thick 364.00

Notes: 1) For slotted strike (CL10-352), see CL Parts: Strikes, Page CL-6. 2) Locking provided by swinging cam. Attached to door with hex nut. 3) Keying options: see Keys & Keying 4) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request Process on page iv. 5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.40. This does not apply to Primus families. See Terms & Conditions for more information. 6) Specify door hand and door thickness.

CL • Parts Trim Collars, Strikes, Adapters, Screws

Price Book 74Effective March 4, 2013 • Rev. 3/13

CL-6

36-031

CL10-352

Trim Collars Part Specify Price Number Finish Description Each36-031 • 1 3/16” diameter x 5/8” depth $8.50

CL10-354 CL10-355

Strikes Part Price Number Description EachCL10-352 Slotted strikeCL10-354 Bar strike, 3/4” x 1 31/32” x 1/4”, standard $2.30 CL10-355 Bar strike, 3/4” x 1 31/32” x 1/2”, standard

Adapters Part Price Number Description EachCL10-350 Spacer $2.30

Screws Part Price Number Description EachCL10-301 Retaining screw $0.30

CL-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Parts • CLDrivers and Accessories, Trim Collars

Drivers and Accessories for CL100/200/ 725/721/ 777/888 Series Part Price Number Description EachCL10-360 Universal Driver bar for CL100/ 200 $1.70CL10-361 Driver bar for CL100/ 200PB 1.70CL10-362 Driver bar for CL100/ 200PB 1 3/8” long 1.70CL7788-PA-D Actuator for FSIC CL locks 1.70CL725-1 Spacer for 6 pins SFIC 1.50CL-ETS1 External trim plate spacer 2.20CLTR78 Trim rings 626 or 605 2.40

CL-720G Cam Part Price Number Description EachCL720-3-1 CL720 short cam inverted hand $2.30CL720-3-2 CL720 long inbent cam, vertical hand 2.30CL720-3-3 CL720 long offset cam, inverted hand 2.50CL720-3-4 CL720 long straight cam, vertical hand 2.50CL720-3-5 CL720 long shall offset cam, inverted hand 2.30CL775-SP Strike pack for CL775 (Latch lock) 2.30CL725-SP Strike pack for CL725 (Deadbolt lock) 2.20

CL729-Ratchet Locks Accessories Part Price Number Description EachCL729S-2 Optional strap for 3/8” material thickness $7.30CL729S-3 Optional strap for 5/8” material thickness 10.40

CL720/920 Trim Collars Part Price Number Description EachTR201 Trim collar for CL720/ 920, 1/8” (626,605) $3.20TR202 Trim collar for CL720/ 920, 1/4” (626,605) 3.80TR203 Trim collar for CL720/ 920, 3/8” (626,605) 4.20TR200A Trim collar package for CL720/ 920, includes all three 11.50

CL

Price Book 74Effective March 4, 2013 • Rev. 3/13

CL-8

Notes

Tool-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Introduction TOOLS & KITS

Table of ContentsKeying Tools & Kits Tool-2 Full Size Pin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-2 Full Size Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-3 Small Format Interchangeable Core Pin Kits . . . . . . . . . . Tool-4 Small Format Interchangeable Core Service Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-4 Competitive Keying Kits . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-5 Competitive Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . Tool-5 Tools Tool-6 Installation Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-6 Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7 Torx® Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7Kits Tool-8 Portable Security Repair Kit . . . . . . . . . . . . . . . . . . . . . . . Tool-8 Home Secure RCK Accessories . . . . . . . . . . . . . . . . . . . Tool-8 Maintenance Kits (Replacement Parts Assortments) . . . . . Tool-8 Installation JIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-9 Mortise JIG (wood) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-10How To Order Forms & Examples

Price Book 74Effective March 4, 2013 • Rev. 3/13

Tool-2

Full Size Pin KitsTOOLS & KITS • Keying Tools & Kits

�

40-119 40-133 40-134

Full Size Pin Kits Part Price Number Description Contents Each40-070 Primus® pin kit Sidebars Finger pins Sidebar springs $380.00 Finger pin springs Plug holder40-119 Pin kit, seal-tight metal box Bottom pins Retainer cap pins Removal tool 323.00 Master pins Retainer cap pin springs T-Pin Spring Top pins Shim stock T-pin Pin springs Tweezers Removable Cap Retainer caps Follower bar40-132 Retail Keying Kit, seal-tight Bottom pins B-Series cylinder bars T-Pin Spring 207.00 metal box Top pins Key gage T-pin Pin springs Follower bar Removable Cap Cylinder caps Cap-removal tool Cap spring and pins Retaining Rings40-133 Home Secure™ Pin kit Bottom pins Tweezers Construction balls 356.00 Top pins Retaining rings Retainer cap pins Master pins Retainer caps T-Pin Spring Follower bar Retainer cap pin springs T-pin Removal tool B-Series cylinder bars Removable Cap Key gage B-Series drivers Cylinder springs Shim stock40-134 Pin kit, snap-tight plastic box Bottom pins Key gage Removable Cap 96.70 Top pins Follower bar Pin springs T-Pin Spring Retainer cap pins T-pin

Note: 1) For replacement pins and springs, see Cylinders.

Tool-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Full Size Keying Tools Keying Tools & Kits • TOOLS & KITS

Full Size Keying Tools Part Price Number Description Each40-066 Primus® plug holder $97.9040-074* Everest vise jaw upgrade kit 69.9040-075** Key bitting punch for Everest® C Family, 2,360.00 Everest 29™ S and Obverse keyway families 40-104 Key gage (All Schlage keys except SFIC) 13.6040-116 Shell loading tool 114.0040-099 Key bitting punch for Everest D and Everest 29 T Families 2,830.00 M204-168 Lubriplate 6.10 M204-200 Tweezers 32.30 M204-201 Shim (pack of 25) 25.30 M540-051 Follower 2.80 M540-056 Retainer cap removal tool 49.20 M204-200 Tweezers 32.40M540-000 Aluminum Follower and Master Pin Remover 44.50

* Adds Everest® C and Everest 29 S Family capability to Blue Punch key machines (designed for Obverse keys) with serial numbers below 990358, manufactured before July 1999. ** For all conventional and Primus® keys with Obverse, Everest C and Everest 29 S Family sections only

®

PR

O-L

OK

BLUE PUNCH #BP201

PRO-LOK TOOLS & ACCESSORIES

ORANGE, CA 92667

9

98

5

21

0

87

65

43

21

0

PROFESSIONAL

QUALITY TOOLS

PRO-LOK

40-104 40-074 40-075

40-116 M204-200

M540-051

40-099

M540-056

®

76

43

M540-000Aluminum follower and

Master Pin Remover

Price Book 74Effective March 4, 2013 • Rev. 3/13

Tool-4

TOOLS & KITS • Keying Tools & Kits Small Format Interchangeable Core Pin Kit and Service Equipment

Small Format Interchangeable Core Pin Kits Part Price Number Description Contents Each40-129 A2 System pin kit Blocking pin springs Plug retainers $656.00 Blocking pins Capping block Bottom pins Capping tool Caps Ejector tool Master/build-up/top pins Key gage Tumbler springs Tweezers

Note: 1) For pin kit refills, see Cylinders.

®

76

43

PR

O-L

OK

BLUE PUNCH #BP201

PRO-LOK TOOLS & ACCESSORIES

ORANGE, CA 92667

9

98

5

21

0

87

65

43

21

0

PROFESSIONAL

QUALITY TOOLS

PRO-LOK

40-071Everest® B and Everest 29™ R

Family Key Bitting Punch

40-181Falcon/Best® SFIC Key Bitting Punch

9 8 7 6 5 4 3 2 1 0

40-128SFIC Key Gage

40-172Ejector Pin

40-171IC Decode, Dump Tool

40-173Staking Tool

Small Format Interchangeable Core Service Equipment Part Price Number Description Each40-071* Key bitting punch, Everest B and Everest 29 R Family keys only $2,970.0040-128 Key gage, A2 system 13.4040-181 Key bitting punch, Falcon/Best® 2,797.0040-171 IC decode, rekey, dump tool 200.0040-172 Ejector Tool 37.7040-173 Staking Tool 37.70

* For service of this key machine, contact: Pro-Lok 655 North Hariton St. Orange, CA 92668 (714) 633-0681 FAX (714) 633-0471

Tool-5Price Book 74Effective March 4, 2013 • Rev. 3/13

Competitive Keying Kits and Keying Tools Keying Tools & Kits • TOOLS & KITS

40-090Titan/Kwikset Keying Kit

Competitive Keying Kits enable Schlage Residential B and F-Series cylinders to be keyed into a competitor’s key system .

40-094Weiser Keying Kit

Competitive Keying Kits Part Price Number Description Contents Each40-090 Titan/Kwikset competitive Bottom pins Follower bar Retainer cap pins keying conversion kit Top pins Cap removal tool Retainer cap pin springs Pin springs Key gage B-Series plugs Tweezers Retainer rings F-Series plugs

$401.0040-094 Weiser competitive keying Bottom pins Follower bar Retainer cap pins conversion kit Top pins Cap removal tool Retainer cap pin springs Pin springs Key gage B-Series plugs Tweezers Retaining rings F-Series plugs

Note: 1) For replacement pins, springs and plugs, see Cylinders: Competitive Keying Kit Refills.

Competitive Keying Tools Part Price Number Description EachM504-435 Titan/Kwikset Key gage with bag $12.50M504-439 Weiser key gage with bag

Price Book 74Effective March 4, 2013 • Rev. 3/13

Tool-6

TOOLS & KITS • Tools Installation

40-0261 1/2” Bushing (old style)

40-149Universal Clamp

40-154AL & ND Template

40-155L-Series Template (front side)

40-1521 3/8” Thick Door Adapter

x 2 3/8” Backset

40-159H-Series Template

40-157L-Series Template (reverse side)

40-1535” Backset Adapter

40-158Mortise Pocket Filler (edge)

40-029 40-030

Strike Marking Chisels

40-0311” Front

40-0321 1/8” Front

Latch Marking Chisels

Tool-7Price Book 74Effective March 4, 2013 • Rev. 3/13

Installation Tools Tools • TOOLS & KITS

Installation Tools Part Description Price Number Each 40-017 AL and D-Series Lever castle nut wrench $9.9040-026 Bushing, 1 1/2”, for 40-012 jig 37.5040-029 Strike marking chisel - full lip strikes 59.90 40-030 Strike marking chisel - 1 1/8” x 2 3/4” 66.3040-031 Latch marking chisel - 1” x 2 1/4” 57.2040-032 Latch marking chisel - 1 1/8” x 2 1/4” 57.2040-049 Tool box, for 40-006 kit 211.0040-050 Tool box, for 40-055 kit 186.0040-112 Circular strike bit for machine equipment 652.0040-149 Universal Clamp 180.0040-152 Backset Adapter for 1-3/8” doors and/or 176.00

2-3/8” Backset40-153 Backset Adpter for 5” Backset 122.0040-154 AL and ND Series Template 177.0040-155 L Series Template (front side) 259.0040-157 L Series Template (reverse side) 259.0040-158 L Series mortise pocket filler (edge) 130.0040-159 H Series Template 223.0040-035 Strike locator - 7/8” 41.1040-015 7/8” Boring bit 154.0040-179 Strike locator - 1” 41.1040-175 1” Boring bit 79.5040-176 2-1/8” Multi-spur bit 200.0040-177 1-1/2” Muliti-spur bit 174.0040-178 Quick change bit adapter 137.0024002693 ND & L Lever removal tool 17.50M204-198 Boring jig, for AL or D-Series Levers 12.60M504-271 Tool to remove AL and D-Series levers 1.50M504-306 Circular faceplate wrench 1.90021415 Spanner wrench, D-Series Knobs and L-Series 3.20 M504-347 Socket screw key, for 40-012 jig 1.80M504-413 Installation tool, interchangeable core 13.30N523-108 Tool to remove AL and D-Series levers 1.20

M504-413

N523-108

Torx® Tools Part Number Description Price EachM504-424 Tool T-8 $32.30M504-425 Tool T-15M504-426 Tool T-20 31.20 M504-427 Tool T-30M504-428 Tool T-10

M504-271

021415

Price Book 74Effective March 4, 2013 • Rev. 3/13

Tool-8

TOOLS & KITS • Kits RCK Accessories, Maintenance Kits

Home Secure RCK Accessories Part Price Number Description Each50-110 Home Secure Keying Chart $398.00 Fifteen construction key combinations, each with 600 compatible home owner combinations for a total of 9,000 key combinations . Includes user’s manual .P513-024 Home Secure Construction Key Envelopes 0.40P513-023 Home Secure Owner Key Envelopes 0.4034-401 Home Secure Replacement Construction Balls (pack of 32.90 1,000 construction balls)

Maintenance Kits (Replacement Parts Assortments) Part Price Number Description Each40-054 L-Series maintenance kit $720.0040-097 ND-Series Lever maintenance kit 230.00

Portable Security Repair Kits Part Price Number Description EachKZ390AL Portable Security Repair Kit supports all Portable $526.00 Security Commercial Padlocks and Locking Cables, SFIC and KNK . See PS-9 for additional details

KZ390ALPortable Security Repair Kit

Tool-9Price Book 74Effective March 4, 2013 • Rev. 3/13

Installation Kits Kits • TOOLS & KITS

40-147Complete Installation Kit

40-148Installation JIG

M504-497Case Only

40-1762 1/8” Multi Spur Bit

40-1771 1/2” Multi Spur Kit

40-175 1” Bit40-015 7/8” Bit

40-1791” Strike Locator

40-0357/8” Strike Locator

40-178Quick Change Bit Adapter

40-029Full Lip Strike Chisel

40-0301 1/8” x 2 3/4” Strike Chisel

40-0311” x 2 1/4” Latch Chisel

40-0321 1/8” x 2 1/4” Latch Chisel

Installation Kits Part Price Number Description Contents Each40-147 40-148 40-175 $1,888.00 M504-497 40-179 40-176 40-178 40-177 40-029 40-030 40-031 40-032 M504-497 Case Only — 167.0040-148 Installation JIG only — 1,431.00

Installation Kit for Locksets & Deadbolts Kit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike chisels, (2) Bushing Plates, Quick Change bit adapter, 1” Auger bit & strike locator

Notes: 1) For F-Series installation, 40-015 and 40-035 (Page Tool-7) is required. 2) For 40-147, doors requiring thrubolt holes and/or 7/8” edge bores, bits sold separately. Reference Tool-7.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Tool-10

TOOLS & KITS • Kits installation Kits

40-160Mortise Lock JIG

40-1615/8” Wood Cutter Bit

40-16211/16” Wood Cutter Bit

40-1633/4” Wood Cutter Bit

40-16413/16” Wood Cutter Bit

40-1657/8” Wood Cutter Bit

40-16615/16” Wood Cutter Bit

40-1671” Wood Cutter Bit

40-1681 1/16” Wood Cutter Bit

40-169 1 1/4” Wood Cutter Bit

40-170Long Boring Shaft

Installation Kits Part Price Number Description Contents Each40-160 Installation kit for mortise lock 40-160 40-169 $992.00 Kit includes: Jig, Case (3 wood 40-165 40-170 cutter bits and long boring shaft) 40-167

Installation Tools Part Description Price Number Each 40-161 5/8” Woodcutter Bit $94.3040-162 11/16” Woodcutter Bit 94.3040-163 3/4” Woodcutter Bit 94.3040-164 13/16” Woodcutter Bit 94.3040-165 7/8” Woodcutter Bit 102.0040-166 15/16” Woodcutter Bit 102.0040-167 1” Woodcutter Bit 102.0040-168 1-1/16” Woodcutter Bit 102.0040-169 1-1/4” Woodcutter Bit 128.0040-170 Long boring shaft for locks up to 6” 195.00

Merch-1Price Book 74Effective March 4, 2013 • Rev. 3/13

Introduction MERCHANDISING AIDS

Table of ContentsDisplay Mounts Merch-3 Solid Oak Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3 Special Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3Miscellaneous Merch-4 Finish Selector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4 Plastic Lock Case Cover . . . . . . . . . . . . . . . . . . . . . . Merch-4 Promotional Items . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4How To Order Forms & Examples

Product literature is available, contact Customer Service.

Price Book 74Effective March 4, 2013 • Rev. 3/13

Merch-2

Solid Oak MountsMERCHANDISING AIDS • Display Mounts

Solid Oak Mounts44-104 44-105 44-106 44-107

44-108 44-109* 44-110 44-111

44-112 44-113 44-119* 44-120*

44-121

®

®

®

®

®

®

®

®

®

®

®

®

Dexter by Schlage44-070 44-133 44-132 44-157

* Top and bottom holes are 4” center to center.

®

XL11-806

®

?Commercial Price Book 6Effective March 1, 2006

44-161

®

44-162

®

Merch-3Price Book 74Effective March 4, 2013 • Rev. 3/13

Display Mounts • MERCHANDISING AIDS

Display Mounts Part Dimensions Price Number Description A B C Overall Each44-104 B (except BR260 & B260E) 2 3/8” 1 1/2” 1 1/8” 6” x 9 1/2” $93.0044-105 A, F/FA, B/BA (single) and BE 2 3/8” 2 1/8” 1” 6” x 9 1/2” 93.0044-106 A with B/BA, F/FA, FE,and H (double) 2 3/8” 2 1/8” 1” 6” x 14” 112.0044-107 A, F/FA, B/BA (triple) 2 3/8” 2 1/8” 1” 6” x 14” 119.0044-108 A, F/FA, B/BA (quadruple) 2 3/8” 2 1/8” 1” 6” x 24 1/2” 149.0044-109 F/FA, FE300 2 3/8” 2 1/8” 1” 6” x 24 1/2” 123.0044-110* L9000 2 3/4” — — 8 1/2” x 14” 112.0044-111 A, B600/700/800, D Knob, S (single) 2 3/4” 2 1/8” 1 1/8” 8 1/2” x 14” 123.0044-112 D Lever, AL (single), ND Lever 2 3/4” 2 1/8” 1 1/8” 8 1/2” x 14” 146.0044-113 A, S, D Knob (triple) 2 3/4” 2 1/8” 1 1/8” 8 1/2” x 24 1/2” 174.0044-115 Clear plastic mount ring — 2 1/8” — 2 1/2” x 1” 34.6044-119 F300 BOW 2 3/8” 1 1/2” (top) 2 1/8” (bottom) 1” 6” x 24 1/2” 119.00

44-120 F300 CEN 2 3/8” 1 1/2” (top) 2 1/8” (bottom) 1” 6” x 24 1/2” 119.00

44-121 S200, H 2 3/8” 1 1/2” (top) 2 1/8” (bottom) 1” 6” x 14” 114.00

44-161 FE & BE Keypad Lock Mount 2 3/8” 2 1/8” 1” 6 ” x 14” 88.4044-162 FE & BE Keypad Lock & 1 1/2” (top) Keypad Deadbolt Mount 2 3/8” 2 1/8” (bottom) 1” 6 ” x 19 ” 113.00

* For special L lock mount, see Special Parts.

Notes: 1) Price does not include lock. 2) L400-Series mounts are not available.

Backset�

AC

B Cross Bore

Faceplate�Width

Mount Dimensions

Note: 1) If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center Process in the forms and example section.

Special Parts6 Extended Factory Lead Time Not subject to standard discount terms Part Price Number Description EachXL11-806 Modified 44-110 display mount with see-through window $419.00

Display Mounts, Special Parts

Dexter by Schlage Mounts Part No. Description List 44-070 Dexter 3 Hole Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) $119.00 44-132 Dexter 1 Hole Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 93.00 44-133 Dexter Handleset Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 119.00 44-157 Dexter Handleset Decorative Trim - Cirrus - Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 112.00

Price Book 74Effective March 4, 2013 • Rev. 3/13

Merch-4

Finish Selector Kit, Plastic Lock Case Cover,Promotional Items, MERCHANDISING AIDS • Miscellaneous

39-029

Finish Selector Kit Part Price Number Description Each

39-029 Finish selector kit $35.20 Finishes: 505, 605, 606, 609, 612, 613, 619, 620, 622, 625, 626, 629, 630, 716, 643e

Plastic Lock Case Cover Part Price Number Description Each

39-042* Plastic lock case cover (for display), L-Series $61.50

* For lock cases manufactured after January, 1998.

© 2013 Ingersoll Rand SC-2008 Rev. 3/13 Printed in U.S.A.

877.671.7011 www.schlage.com www.ingersollrand.com

Ingersoll Rand’s Security Technologies Sector is a leading global provider of products and services that make environments safe, secure and productive. The sector’s market-leading products include electronic and biometric access-control systems; time-and-attendance and personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors and frames; and other technologies and services for global security markets.