SCITEQ End closure Mounting Machine
www.sciteq.com - [email protected]
We help you perform even better
About
FunctionThe SCITEQ End Closure Mounting machine optimizes the preparation of large pipe samples – saving time and cost on mounting and de-mounting end closures significantly.
The hydraulic towers forcing the end closures on to the pipe are safely controlled from remote control. The clamps secure fixation of the top cap, allowing for safe and convenient manual fine tuning. The design secures accurate mounting of the end cap ensuring no leakage while testing.
ConstructionThe European build End Closure Mounting machine is extremely robust, constructed with heavy duty parts and high level of hydraulic force. The machine isdesigned to handle end closures for pipes in PE, PEX, PVC, PP, ABS in sizes up to OD 1200mm, the shown version is build to handle DN110-DN1200
End closure Mounting Machine
Highlights
Highlights
time-saving handling of large end closures
simple operation
safe and convenient handling
easy and accurate adjustment
robust construction
easily accessible from all four sides
Standards
The SCITEQ End Closure Mounting machine enables you to prepare samples to test according to the standard ASTM D 1598, ASTM D 1599 and ISO 1167.
Please contact us at [email protected] for further information on the test procedure and please refer to technical specifications in this brochure or contact SCITEQ A/S for more information.
End closure Mounting Machine
Features
Operation
Operation is partly manually and partly by electric controller with hydraulic cylinders for operation/lifting for fine tuning.
High durability
The construction is robust ensuring long lifetime and reliable operation, which is required for handling large pipe samples as well as large end closures up to Ø1200mm. The machine is easy accessible from all four sides which eases the difficult handling of heavy end closures.
Time-saving solution
The mounting/de-mounting process normally requires min. 2 – 3 people for several hours plus force from an external source to ensure 100% tight sealing. The ECMM design enables operation by only one person - even when handling very large samples, thus saving both time and manpower.
End closure Mounting Machine
Scope
SCITEQ End closure mounting and demounting machine is designed to handle:• End closures 1520 for pipes in PE, PEX,
PVC, PP, ABS• End closures 1525 for pipes in PE, PEX,
PVC, PP, ABS• End closures 1530 for pipes in PE, PEX,
PVC, PP, ABS• Adaptors available for non-SCITEQ end
closures
Dimensions
Dimensions
The SCITEQ End Closure Mounting machine consists of the mainframe and control cabinet. Dimensions are as shown:
Cabinet: Weight approx. 80 kg.
End closure Mounting Machine
SCITEQ thermo tanks 0 – 95 C
With the ECO line thermo tanks you get accurate conditioning of any type of sample at temperatures from 0 to 95° degrees Celsius. The Themo Tanks are available in multiple dimensions from volumes of 0,5 to 12 m3 water making the tanks suitable for countless specimen configurations and test scenarios.
Laboratory Saw
The SCITEQ lab saw is specially designed for laboratory preparation of pipe samples for dimensions from Ø 32 mm up to Ø 660 mm as standard and larger on request. The Laboratory Saw makes cutting and chamfering pipes faster, safe and more precise than ever, with the whole process taking place all in the same time.
Accessories & Associated equipment
Product: End closure Mounting Machine
End closures for large diameters
For internal hydrostatic pressure testing of larger pipe diameters from 315 to 1600mm –and larger at request. The end closures seal off the sample in order to generate internal pressure in the sample. Max. pressure depends on standard, specifications and pipe sample diameter.
SCITEQ pressure test solutions
For pressure testing plastic pipes and fittings in PE, PEX, PVC, PP, PB & glass fibre pipes. The system is a modular airless pressure testing system with unparalleled accuracy no matter what size sample is connected to the system. Solutions can contain from 5 to 50 individual pressure stations per cabinet.
Technical Specifications
End closure Mounting Machine
End Closure Mounting Machine 1200
Standard pipe dimension range [mm] DN160-DN1200
Sample length [mm] From 1350 to 3900 mm (min & max total lenght of pipe sample incl. end closures)
SCITEQ endclosure range* SCITEQ endclosure model 1520: Ø160mm to Ø280mmSCITEQ endclsoure model 1525: Ø315mm to Ø1200mmSCITEQ endclsoure model 1530: Ø160mm to Ø1200mm
Mount and demount of endcaps
Main frame weight [kg] Approx: 2900
Control cabinet weight [kg] Approx: 80 kg
Frame material AISI 304, SJ235
Electrical supply 3x400V + Neutral + PE
Remote control (incl. 8 mtr wire)
Press/force equipment Hydraulic
Endclosure clamp design Clamps are universal for all pipe and SCITEQ endcap diameters
Material, pipe sample Suitable for mounting and dismounting caps on pipes: PE, PEX, PVC, PP, ABS
Operational temperature [°C] 2-45
Additional equipment Adaptors available for non-SCITEQ end closures
*Only gauarnteed with the use of SCITEQ endclosures and within the specified minimum sample lenght.
SCITEQ Care You will find the level of service suitable for your test setup with SCITEQ Care. SCITEQ service engineers will visit you annually to perform the best service and calibration. With SCITEQ Basic, More or All Care package you gain access to a long list of advantages, discounts and free support from SCITEQ skilled technician. Learn more about SCITEQ Care
Installation & trainingSCITEQ’s trained service technicians perform onsite installation of your new SCITEQ equipment as well as onsite or remote training of your operating personnel who will be using the equipment.
SCITEQ Service & Support
Support online & on-siteSCITEQ offers online and on-site support on all SCITEQ products, for fast and effective problem solving, training, setup, etc. If you have an unforeseen challenge or you need advise asap, you can contact [email protected] or call us for urgent support.