STACKING CALENDAR GIFT BOX & JOTTER HOLDERPHOTOGRAPHIC TUTORIAL

CUT OUT ALL THE GIFT BOX ELEMENTS

SCORE & M FOLD THE SIDE TABS, BASETABS AND CENTRE LINES ON THE BOXSIDES. FIX THE ACETATE BEHIND THE

APERTURES USING D/S TAPE

PRINT ALL SHEETS ONTO A GOOD QUALITY CARD STOCK (I HAVE USED 230 GSM PHOTO GLOSS)

CUT 4 PIECES OF ACETATE APPROX. 9 X 12 CM

FIX ONE OF THE BASE TABS TO THE BOXBASE AS SHOWN

FIX A BASE TAB FROM THE OTHER SIDEPANELS TO THE BASE AS SHOWN

GLUE THE REMAINING SIDE TABS TO THEBASE, FIXING THE SIDE TABS AS YOU WORK

AROUND THE BOX.

SCORE & M FOLD THE TAB LINES ON THEBASE WELL AND CUT OUT THE MIDDLE

SECTION - GLUE THE FOUR CORNER TABSTO CREATE THE WELL. PLACE IN THE BASE

OF THE GIFT BOX.

SCORE & M FOLD THE LINES ON THE BOXLID AND GLUE THE FOUR CORNER TABS TO

COMPLETE.

GLUE THE GIFT TAGS BACK TO BACK ANDFIX TO THE BOX AS YOU WISH AND YOUR

GIFT BOX IS COMPLETE.

TO MAKE THE JOTTER HOLDERPRINT ALL SHEETS ONTO A GOOD QUALITY CARD STOCK

GLUE THE TWO HOLDER PIECES ONTO ASPARE PIECE OF CARD FOR ADDED STRENGTH

CUT OUT ALL ELEMENTS

SCORE &V FOLD THE TWO TABS ON THEHOLDER AND M FOLD THE TABS AND

CENTRE LINE ON THE POCKET.

GLUE ONE SIDE OF THE POCKET TO THEBACK OF ONE OF THE HOLDER ELEMENTS

AS SHOWN.

FIX THE OTHER SIDE OF THE HOLDER TO THEOTHER SIDE OF THE POCKET, LINING UP THE

EDGES CAREFULLY. APPLY A FINE LINE OF GLUETO THE OUTER EDGES AS SHOW AND FIX

THE EDGES TOGETHER

GLUE THE INSTRUCTION JOTTER AND THE GREETING JOTTER BACK TO BACK AND PLACE IN THEPOCKET. OPEN OUT THE STAND TABS TO DISPLAY.

MAKE UP THE ENVELOPE AND YOUR JOTTER HOLDER IS COMPLETE