Date post: | 19-Mar-2016 |
Category: |
Documents |
Upload: | dave-haglund |
View: | 216 times |
Download: | 1 times |
E Q U I P M E N T C O M PA N Y
605 4th Avenue Northwest • New Prague, Minnesota 56071 • (800) 394-2591 • www.scottequipment.com
Twin Shaft Mixer
Your Global Equipment Supplier for the Feed Industry
Consistent CV's of 3-6%
Mix times as low as 30 seconds
Ribbon/Paddle Design engineered specifically for Twin Shaft Mixer
Able to mix down to 10% of rated capacity
Low profile design for ease of installation into existing facilities
Capacities from .1 - 42 cubic meters
10 year warranty on main shaft
SCOTT TENDER BLEND CONTINUOUS MIXERThis mixer is designed to continuously mix delicate products, such as texturized animal feeds, with minimal product degradation. The unique design on the agitator protects the integrity of the product during the mixing process.
The Tender Blend’s design, in association with the speed of the mixer, allows for a range of retention times to meet a product’s specific requirements. The Tender Blend is available with complete liquid addition.
SCOTT BATCH MIXERSThe enhanced agitator with close wrapped ribbon and the high efficiency tub design provide an efficient, balanced mixing action yielding cycle times as low as 90 seconds. In addition to the ribbon agitator, paddle / ribbon and paddle / paddle agitators are available to meet specific mixing needs.
Scott Surge Hoppers provide fast, efficient clean-out. The Scott Surge Hopper is available with either a paddle drag or screw conveyor for discharge, will accommodate the entire batch mixer and can be equipped with the Scott invented curved section for inclines up to 45 degrees.
www.scottequipment.com
For more information, please contact us:605 4th Avenue NW, New Prague MN 56071Phone: (800) 394-2591 (952) 758-2591Fax: (952) 758-4377E-mail: [email protected] visit our website at www.scottequipment.com
E Q U I P M E N T C O M PA N Y