Date post: | 14-Apr-2015 |
Category: |
Documents |
Upload: | julio-gomez-silverman |
View: | 152 times |
Download: | 2 times |
KADkaffffffffff
; IMPORTANT:
;
; This file is not to be modified except as directed by
; Kofax Image Products technical support.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; The ScannerNames, DriverType, and DriverName sections
; provide the mapping from scanner name to the ISIS driver name
; or TWAIN scanner model used to support the scanner selected
; during the SVRS install.
; Right now, the scanner names are also hard coded in SETUP.RUL.
; The two sets of names have to match exactly (except order).
; These sections are read by the SvScnCfg.exe program launched
; by the installation script SETUP.RUL.
;
[ScannerNames]
1=HP Scanjet 7000
2=HP Scanjet 7500
3=HP Scanjet 7800
4=HP Scanjet 8290
5=HP Scanjet 8300
6=HP Scanjet 9000
7=HP Scanjet N7710
8=HP Scanjet N8400
9=HP Scanjet N9120
[DriverType]
1=ISIS
2=ISIS
3=ISIS
4=ISIS
5=ISIS
6=ISIS
7=ISIS
8=ISIS
9=ISIS
[DriverName]
1=hp7000sf.pxn
2=HP7500.pxn
3=hp7800.pxn
4=hp8290.pxn
5=hp8300.pxn
6=HP9000.PXN
7=hpn7710.pxn
8=HPN8400.pxn
9=hpn9120.pxn
[DriverWarning]
1=0
2=0
3=0
4=0
5=0
6=0
7=0
8=0
9=0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; <scanner name>-VRS-TRAP-ACTION sections:
; <scanner name>-VRS-TRAP-THRESHOLD sections:
;
; Format of section name:
; [<scanner name>-VRS-TRAP-ACTION]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Bell & Howell 8000 B/C-VRS-TRAP-ACTION]
;
; NOTE: <scanner name> is similar but not the same string as the
; <scanner id tag> used elsewhere in this file.
;
; These items are used to override entries in Default traps.cts.
; These sections are read by the SvScnCfg.exe program launched
; by the installation script SETUP.RUL.
;
[Bell & Howell 8000 B/C-VRS-TRAP-ACTION]
Trap-BrightnessTooLow=1 ;Ignore Error
[Bell & Howell 8000 B/C-VRS-TRAP-THRESHOLD]
Trap-ForExample=6 ; (example for testing only)
Trap-BrightnessTooLow=35
[Bell & Howell 8000 B/C (non-interactive mode)-VRS-TRAP-ACTION]
Trap-BrightnessTooLow=1 ;Ignore Error
[Bell & Howell 8000 B/C (non-interactive mode)-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=35
; Only the items that are different from [Default Scanner-VRSREGSET]
[Bell & Howell 8000 B/C-VRSREGSET]
Item1=OEMCODE_BELL+HOWELL
Item2=OEMSUBCODE_BELL+HOWELL
; Only the items that are different from [Default Scanner-VRSREGSET]
[Bell & Howell 8000 B/C (non-interactive mode)-VRSREGSET]
Item1=OEMCODE_BELL+HOWELL
Item2=OEMSUBCODE_BELL+HOWELL
Item3=QC_Disabled
Item4=HW_WarningsOff
[Fujitsu fi-4860C-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=32
[Fujitsu fi-4990C-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=33
[Fujitsu M4097D (Hardware)-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=32
[Fujitsu M4099D (Hardware)-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=32
[Fujitsu fi-4750C (Hardware)-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=39
[Fujitsu fi-4750L (Hardware)-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=30
; Phoenix scanners do not have support for auto resolve
;
[Kodak i600 Series-VRS-TRAP-ACTION]
Trap-PaperJam=2 ;Return Error
Trap-CoverOpen=2 ;Return Error
Trap-OutOfPaper=2 ;Return Error
Trap-MultifeedDetected=2 ;Return Error
Trap-BrightnessTooLow=1 ;Ignore Error
[Kodak i600 Series-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=37
[HP Scanjet 7800-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=30
[HP Scanjet 8300-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=32
[HP Scanjet N9120-VRS-TRAP-THRESHOLD]
Trap-BrightnessTooLow=30
[HP Scanjet N9120-VRS-TRAP-ACTION]
Trap-MultifeedDetected=2
[QC_Disabled]
Type=Registry
MainKey=HKEY_CURRENT_USER
SubKey=Software\Kofax\Condor\1.0\Settings
Name=StopMode
ValueType=REG_DWORD
Value=3
[HW_WarningsOff]
Type=Registry
MainKey=HKEY_CURRENT_USER
SubKey=Software\Kofax\Condor\1.0\Settings
Name=HwErrors
ValueType=REG_DWORD
Value=0
;
; Everything in [Default Scanner-VRSREGSET] is written to the registry.
; After that, any scanner-specific overrides are done.
; Search for VRSREGSET elsewhere in this file to see examples of
; scanner-specific registry overrides.
;
[Default Scanner-VRSREGSET]
Item1=OEMCODE_SVRS
Item2=OEMSUBCODE_SVRS
Item3=QC_OnErrors
Item4=HW_WarningsOn
[OEMCODE_SVRS]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMCODE
ValueType=REG_SZ
Value=SVRS
[OEMSUBCODE_SVRS]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=SVRS
[OEMCODE_BELL+HOWELL]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMCODE
ValueType=REG_SZ
Value=BELL+HOWELL
[OEMSUBCODE_BELL+HOWELL]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=BELL+HOWELL
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu fi-4990C-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_fi4990
Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu fi-4860C-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_fi4860
Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu M4097D (Hardware)-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_FUJITSU
Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu M4099D (Hardware)-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_FUJITSU
Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu fi-4750C (Hardware)-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_FUJITSU
Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET]
[Fujitsu fi-4750L (Hardware)-VRSREGSET]
Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_FUJITSU
Item3=QC_Disabled
; This is for Fujitsu HVRS only (not SVRS)
[OEMCODE_FUJITSU]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMCODE
ValueType=REG_SZ
Value=FUJITSU
; This is for Fujitsu HVRS only (not SVRS)
[OEMSUBCODE_FUJITSU]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=FUJITSU
[OEMSUBCODE_fi4990]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=fi4990
[OEMSUBCODE_fi4860]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=fi4860
[QC_OnErrors]
Type=Registry
MainKey=HKEY_CURRENT_USER
SubKey=Software\Kofax\Condor\1.0\Settings
Name=StopMode
ValueType=REG_DWORD
Value=1
[HW_WarningsOn]
Type=Registry
MainKey=HKEY_CURRENT_USER
SubKey=Software\Kofax\Condor\1.0\Settings
Name=HwErrors
ValueType=REG_DWORD
Value=1
; Only the items that are different from [Default Scanner-VRSREGSET]
[Glory FU-1-VRSREGSET]
Item1=OEMCODE_SVRS
Item2=OEMSUBCODE_GLORY
[OEMSUBCODE_GLORY]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=GLORY
; Only the items that are different from [Default Scanner-VRSREGSET]
[HP Scanjet 8290-VRSREGSET]
Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET]
[HP Scanjet 7800-VRSREGSET]
Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET]
[HP Scanjet 8300-VRSREGSET]
Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET]
[HP Scanjet N9120-VRSREGSET]
Item1=OEMSUBCODE_HP
[OEMSUBCODE_HP]
Type=Registry
MainKey=HKEY_LOCAL_MACHINE
SubKey=Software\Kofax\Condor
Name=OEMSUBCODE
ValueType=REG_SZ
Value=HewlettPackard
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; <scanner name>-VRSSET sections:
;
; Format of section name:
; [<scanner name>-VRSSET]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VRSSET]
;
; NOTE: <scanner name> is similar but not the same string as the
; <scanner id tag> used elsewhere in this file.
;
; These items are used to override entries in Default settings.cps.
; These sections are read by the SvScnCfg.exe program launched
; by the installation script SETUP.RUL.
;
[Fujitsu ScanPartner 15C-VRSSET]
EdgeThreshold=60
GLUT_Gamma=15
[Fujitsu ScanPartner 620C-VRSSET]
GLUT_Gamma=10
[Fujitsu M3093GX-VRSSET]
EdgeThreshold=60
GLUT_Gamma=20
[Fujitsu ScanPartner 93GX-VRSSET]
EdgeThreshold=60
GLUT_Gamma=20
[Epson GT-10000+-VRSSET]
[Epson GT-30000-VRSSET]
GLUT_Gamma=3
[Epson Perfection 1640SU with ADF-VRSSET]
EdgeThreshold=60
[Canon CanoScan N650U/N656U-VRSSET]
EdgeThreshold=65 ;VRS Contrast
GLUT_Gamma=23
[Canon CanoScan N1220U-VRSSET]
EdgeThreshold=65 ;VRS Contrast
GLUT_Gamma=22
[Fujitsu fi-4750C-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=15
CropEnable=1
BlackBorder=1
[Fujitsu fi-5750C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=13
CropEnable=1
BlackBorder=1
[Bell & Howell 8000 B/C-VRSSET]
CropEnable=1
EdgeThreshold=50
[Bell & Howell 8000 B/C (non-interactive mode)-VRSSET]
CropEnable=1
EdgeThreshold=50
[Fujitsu fi-4860C-VRSSET]
EdgeThreshold=65 ;VRS Contrast
GLUT_Gamma=15
CropEnable=1
BlackBorder=1
[Fujitsu fi-4990C-VRSSET]
CropEnable=1
BlackBorder=1
[Fujitsu M3091DC-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=0
[Fujitsu M3092DC-VRSSET]
EdgeThreshold=60
GLUT_Gamma=0
[HP ScanJet 6250C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=5 ;VRS Gamma (gray/BW)
[HP ScanJet 6300C-VRSSET]
EdgeThreshold=63 ;VRS Contrast
GLUT_Gamma=20 ;VRS Gamma (gray/BW)
[HP ScanJet 6350C-VRSSET]
EdgeThreshold=63 ;VRS Contrast
GLUT_Gamma=5
[HP Scanjet 8290-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=0
CLUT_Brightness=50
CLUT_Contrast=50
CLUT_Gamma=0
[HP Scanjet 7800-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=5
CropEnable=1
BlackBorder=0 ;No Edge Cleanup
CLUT_Brightness=55
CLUT_Contrast=50
CLUT_Gamma=0
[HP Scanjet 8300-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=0
CropEnable=1
BlackBorder=0 ;No Edge Cleanup
CLUT_Brightness=55
CLUT_Contrast=50
CLUT_Gamma=0
[HP Scanjet N9120-VRSSET]
EdgeThreshold=50 ;VRS Contrast
GLUT_Gamma=0
CropEnable=1
BlackBorder=1 ;Enable Edge Cleanup
CLUT_Brightness=50
CLUT_Contrast=53
CLUT_Gamma=0
[Canon DR-3080C-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=15
[Canon DR-5080C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
CropEnable=1
BlackBorder=1
GLUT_Gamma=15
;GlobalThreshold=55
[Canon DR-6080-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=63 ;VRS Contrast
GLUT_Gamma=8
[Canon DR-9080C-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=65 ;VRS Contrast
GLUT_Gamma=15
[Canon DR-4080U-VRSSET]
GLUT_Gamma=30
[Panasonic KV-S6040W (white background)-VRSSET]
GLUT_Gamma=30
[Panasonic KV-S6045W (white background)-VRSSET]
GLUT_Gamma=30
[Panasonic KV-S6040W (black background)-VRSSET]
GLUT_Gamma=30
CropEnable=1
BlackBorder=1
[Panasonic KV-S6045W (black background)-VRSSET]
GLUT_Gamma=30
CropEnable=1
BlackBorder=1
[Panasonic KV-S6050W-VRSSET]
GLUT_Gamma=25 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Panasonic KV-S2065W-VRSSET]
CropEnable=1
BlackBorder=1
GLUT_Gamma=25
[Panasonic KV-S6055W-VRSSET]
GLUT_Gamma=25 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Panasonic KV-S2025C/KV-S2026C-VRSSET]
GLUT_Gamma=0 ;VRS Gamma (gray/BW)
EdgeThreshold=70 ;VRS Contrast
CropEnable=1
BlackBorder=1
[Panasonic KV-S2045C/KV-S2046C-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=60
GLUT_Gamma=5
[Kodak DS 1500-VRSSET]
GLUT_Gamma=20
CropEnable=1
BlackBorder=1
[Kodak DS 2500-VRSSET]
GLUT_Gamma=3
[Bell & Howell 500FB-VRSSET]
EdgeThreshold=55 ;VRS Contrast
GLUT_Gamma=5
CropEnable=1
BlackBorder=1
[Ricoh IS-01-VRSSET]
EdgeThreshold=55 ;VRS Contrast
GLUT_Gamma=5
CropEnable=1
BlackBorder=1
[Kodak I50-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=5 ;VRS Gamma (gray/BW)
[Kodak I60-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=10 ;VRS Gamma (gray/BW)
[Kodak I80-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=0 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Fujitsu fi-4110CU-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=2 ;VRS Gamma (gray/BW)
[Bell & Howell 730DC FB-VRSSET]
EdgeThreshold=65 ;VRS Contrast
[Fujitsu fi-4640S-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=20 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Fujitsu fi-4340C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=10 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Fujitsu fi-4010CU-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=30 ;VRS Gamma (gray/BW)
[Fujitsu M3093DG-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=15 ;VRS Gamma (gray/BW)
[Canon DR-3060-VRSSET]
EdgeThreshold=40 ;VRS Contrast
GLUT_Gamma=40 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Visioneer 9650 USB-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=10 ;VRS Gamma (gray/BW)
[HP ScanJet 7400C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=-3 ;VRS Gamma (gray/BW)
[HP ScanJet 7450C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=-3 ;VRS Gamma (gray/BW)
[HP ScanJet 7490C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=-3 ;VRS Gamma (gray/BW)
[Fujitsu fi-4120C-VRSSET]
EdgeThreshold=65 ;VRS Contrast
[Fujitsu fi-4220C-VRSSET]
EdgeThreshold=65 ;VRS Contrast
[Fujitsu fi-4530C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=10 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Canon DR-2080C-VRSSET]
EdgeThreshold=60 ;VRS Contrast
GLUT_Gamma=20 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Canon DR-4580U-VRSSET]
GLUT_Gamma=10 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Kodak i200 Series-VRSSET]
EdgeThreshold=68 ;VRS Contrast
GLUT_Gamma=1 ;VRS Gamma (gray/BW)
CropEnable=1
BlackBorder=1
[Kodak i280-VRSSET]
EdgeThreshold=68 ;VRS Contrast
GLUT_Gamma=-10 ;VRS Gamma (gray/BW)
CLUT_Gamma=-10 ;VRS Color Gamma
CropEnable=1
BlackBorder=1
[Fujitsu M4097D (Hardware)-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=20
CropEnable=1
BlackBorder=1
[Fujitsu M4099D (Hardware)-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=20
CropEnable=1
BlackBorder=1
[Fujitsu fi-4750C (Hardware)-VRSSET]
EdgeThreshold=70 ;VRS Contrast
GLUT_Gamma=0
CropEnable=1
BlackBorder=1
GlobalThreshold=39
AutoBrightnessEnable=0
[Fujitsu fi-4750L (Hardware)-VRSSET]
EdgeThreshold=65 ;VRS Contrast
GLUT_Gamma=20
CropEnable=1
BlackBorder=1
[Kodak i600 Series-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=65
GLUT_Gamma=0
CLUT_Brightness=52
CLUT_Contrast=50
CLUT_Gamma=-17
[Panasonic KV-S7065C-VRSSET]
CropEnable=1
BlackBorder=1
EdgeThreshold=70
GLUT_Gamma=0
CLUT_Brightness=59 ; Color brightness
CLUT_Gamma=-12 ; Color Gamma
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; <scanner name>-VINSET sections:
;
; Format of section name:
; [<scanner name>-VINSET]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VINSET]
;
; NOTE: <scanner name> is similar but not the same string as the
; <scanner id tag> used elsewhere in this file.
;
; These items are used to override entries in VRSInput.ini.
; These sections are read by the SvScnCfg.exe program launched
; by the installation script SETUP.RUL.
;
[Bell & Howell 8000 B/C-VINSET]
ColorSwitchingWarning=1
ResampleNearestNeighborAngle=1
[Bell & Howell 8000 B/C (non-interactive mode)-VINSET]
ColorSwitchingWarning=1
ResampleNearestNeighborAngle=1
[Kodak i600 Series-VINSET]
InputColor=3
BrightFloor=45
BrightnessAggressiveness=50
EdgeAggressivity=92
[Fujitsu fi-4750C-VINSET]
BrightFloor=45
BrightnessAggressiveness=0
EdgeAggressivity=128
AsymmetricBackgrounds=1
[Fujitsu fi-5750C-VINSET]
BrightFloor=45
BrightnessAggressiveness=50
EdgeAggressivity=128
[Canon CanoScan N1220U-VINSET]
BrightFloor=45
BrightnessAggressiveness=0
[Canon CanoScan N650U/N656U-VINSET]
BrightnessAggressiveness=0
[Canon DR-5080C-VINSET]
BrightnessAggressiveness=0
EdgeAggressivity=100
[Canon DR-6080-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=163
[Canon DR-9080C-VINSET]
BrightFloor=40
BrightnessAggressiveness=0
EdgeAggressivity=160
[Canon DR-3080C-VINSET]
BrightFloor=50
BrightnessAggressiveness=25
[Fujitsu ScanPartner 15C-VINSET]
BrightFloor=55
BrightnessAggressiveness=0
[Fujitsu ScanPartner 620C-VINSET]
BrightFloor=55
BrightnessAggressiveness=0
[Fujitsu M3091DC-VINSET]
BrightFloor=50
[Fujitsu M3092DC-VINSET]
BrightFloor=50
[Fujitsu M3093GX-VINSET]
BrightnessAggressiveness=0
[Fujitsu ScanPartner 93GX-VINSET]
BrightnessAggressiveness=0
[Epson GT-10000+-VINSET]
BrightFloor=55
[Epson GT-30000-VINSET]
BrightFloor=50
[Epson Perfection 1640SU with ADF-VINSET]
BrightnessAggressiveness=75
[HP ScanJet 6250C-VINSET]
ScanZoom=75
[HP ScanJet 6300C-VINSET]
BrightnessAggressiveness=75
ScanZoom=75
[HP ScanJet 6350C-VINSET]
BrightnessAggressiveness=75
[HP Scanjet 8290-VINSET]
BrightnessAggressiveness=50
BrightFloor=45
EdgeAggressivity=128
[HP Scanjet 7800-VINSET]
BrightnessAggressiveness=0
BrightFloor=45
EdgeAggressivity=128
BlackBackground=1
CSkewDetect.offsets.right=10
CSkewDetect.reconcile_crop=0
CSkewDetect.gray_stats_error_sum_thr_white_bkg=45
[HP Scanjet 8300-VINSET]
BrightnessAggressiveness=50
BrightFloor=45
EdgeAggressivity=128
BlackBackground=1
CSkewDetect.offsets.right=10
CSkewDetect.reconcile_crop=0
CSkewDetect.gray_stats_error_sum_thr_white_bkg=45
[HP Scanjet N9120-VINSET]
BrightnessAggressiveness=0
BrightFloor=45
EdgeAggressivity=128
BlackBackground=1
CSkewDetect.white_bkg_threshold=1
GrayJPEGEnabled=0
[Panasonic KV-S2065W-VINSET]
BrightnessAggressiveness=0
BrightFloor=45
[Panasonic KV-S6055W-VINSET]
BrightnessAggressiveness=0
BrightFloor=55
[Panasonic KV-S6050W-VINSET]
BrightnessAggressiveness=0
BrightFloor=55
[Kodak DS 1500-VINSET]
[Kodak DS 2500-VINSET]
BrightnessAggressiveness=25
[Kodak I50-VINSET]
BrightFloor=50
BrightnessAggressiveness=75
[Kodak I60-VINSET]
BrightFloor=40
BrightnessAggressiveness=50
EdgeAggressivity=128
[Kodak I80-VINSET]
BrightFloor=40
BrightnessAggressiveness=50
EdgeAggressivity=128
AsymmetricBackgrounds=1
[Fujitsu fi-4110CU-VINSET]
BrightFloor=50
[Panasonic KV-S6040W (black background)-VINSET]
[Panasonic KV-S6045W (black background)-VINSET]
[Panasonic KV-S2025C/KV-S2026C-VINSET]
BrightnessAggressiveness=0
BrightFloor=45
EdgeAggressivity=128
[Panasonic KV-S2045C/KV-S2046C-VINSET]
BrightnessAggressiveness=0
BrightFloor=45
EdgeAggressivity=128
[Ricoh IS-01-VINSET]
BrightFloor=50
BrightnessAggressiveness=75
[Bell & Howell 500FB-VINSET]
BrightFloor=50
BrightnessAggressiveness=75
[Fujitsu fi-4640S-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=168
[Fujitsu M3093DG-VINSET]
BrightnessAggressiveness=0
EdgeAggressivity=128
[Canon DR-3060-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
[Visioneer 9650 USB-VINSET]
BrightFloor=45
BrightnessAggressiveness=0
EdgeAggressivity=128
[Fujitsu fi-4010CU-VINSET]
BrightFloor=45
BrightnessAggressiveness=0
EdgeAggressivity=128
[Fujitsu fi-4340C-VINSET]
BrightnessAggressiveness=0
AsymmetricBackgrounds=1
BrightFloor=50
EdgeAggressivity=88
[HP ScanJet 7400C-VINSET]
BrightFloor=35
BrightnessAggressiveness=0
[HP ScanJet 7450C-VINSET]
BrightFloor=35
BrightnessAggressiveness=0
[HP ScanJet 7490C-VINSET]
BrightFloor=35
BrightnessAggressiveness=0
[Fujitsu fi-4120C-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=88
[Fujitsu fi-4220C-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=88
[Fujitsu fi-4530C-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=128
[Canon DR-2080C-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=128
[Canon DR-4580U-VINSET]
BrightFloor=55
BrightnessAggressiveness=0
EdgeAggressivity=128
[Kodak i200 Series-VINSET]
BrightFloor=50
BrightnessAggressiveness=50
EdgeAggressivity=88
[Kodak i280-VINSET]
BrightFloor=50
BrightnessAggressiveness=0
EdgeAggressivity=128
[Fujitsu M4097D (Hardware)-VINSET]
AsymmetricBackgrounds=1
[Fujitsu fi-4750C (Hardware)-VINSET]
AsymmetricBackgrounds=1
[Fujitsu fi-4750L (Hardware)-VINSET]
AsymmetricBackgrounds=1
[Panasonic KV-S7065C-VINSET]
BrightnessAggressiveness=0
BrightFloor=50
EdgeAggressivity=160
TopOverScanSize=1800 ; No way to adjust Margin when enabled. This allows VRS to crop top edge.
[INFO-General]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are the <scanner name>-INFO sections.
;
; Format of section name:
; [<scanner name>-INFO]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-INFO]
;
; The ScannerBackground is read every time the
; scanner is reserved. It is translated into a setting in
; the "defaults bag", and AUTO_CROP_CAPABLE is adjusted accordingly.
;
; ScannerBackground=1 ;white
; ScannerBackground=2 ;black
;
; CropPageSizeInfo is read at the start of every
; batch. When CropPageSizeInfo=2 in this file,
; SVRS is prevented from using MAX paper size in
; cropping situations.
;
; CropPageSizeInfo=2 ;Always use application's papersize
[Glory FU-1-INFO]
ScannerBackground=2
[Fujitsu M3091DC-INFO]
ScannerBackground=1
[Fujitsu M3092DC-INFO]
ScannerBackground=1
[Fujitsu M3093GX-INFO]
ScannerBackground=1
[Fujitsu ScanPartner 93GX-INFO]
ScannerBackground=1
[Fujitsu ScanPartner 15C-INFO]
ScannerBackground=1
[Fujitsu ScanPartner 620C-INFO]
ScannerBackground=1
[HP ScanJet 6250C-INFO]
ScannerBackground=1
[HP ScanJet 6300C-INFO]
ScannerBackground=1
[HP ScanJet 6350C-INFO]
ScannerBackground=1
[HP Scanjet 8290-INFO]
ScannerBackground=1
CropPageSizeInfo=2 ;Always use application's papersize
[HP Scanjet 7800-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[HP Scanjet 8300-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[HP Scanjet N9120-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Kodak DS 1500-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-3080C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-5080C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-6080-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-9080C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-4080U-INFO]
ScannerBackground=1
[Panasonic KV-S6040W (white background)-INFO]
ScannerBackground=1
[Panasonic KV-S6045W (white background)-INFO]
ScannerBackground=1
[Panasonic KV-S6040W (black background)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S6045W (black background)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S2065W-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S6055W-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S6050W-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S2025C/KV-S2026C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S2045C/KV-S2046C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 500FB-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Ricoh IS-01-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Kodak I50-INFO]
ScannerBackground=1
[Kodak I60-INFO]
ScannerBackground=1
[Kodak I80-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4110CU-INFO]
ScannerBackground=1
[Fujitsu fi-4990C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4860C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 8000 B/C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 8000 B/C (non-interactive mode)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-3060-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4640S-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4340C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4750C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-5750C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4120C-INFO]
ScannerBackground=1
[Fujitsu fi-4220C-INFO]
ScannerBackground=1
[Fujitsu fi-4530C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-2080C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-4580U-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Kodak i200 Series-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Kodak i280-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu M4097D (Hardware)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu M4099D (Hardware)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4750C (Hardware)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Fujitsu fi-4750L (Hardware)-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Kodak i600 Series-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S7065C-INFO]
ScannerBackground=2
CropPageSizeInfo=2 ;Always use application's papersize
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are the <scanner name>-VRSISIS-KPMSPEC sections.
;
; Format of section name:
; [<scanner name>-VRSISIS-KPMSPEC]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VRSISIS-KPMSPEC]
;
; The appropriate section read every time the
; scanner is reserved. These items are used to set
; the ISIS kpm's private spec variables for proper
; SVRS operation. These sections are intended to
; be used with any ISIS setting (TAG) for which there is a
; corresponding ISIS kpm setting.
;
; The format of the items in these sections is
; dependent on two things: (1) the definition of the
; KCL table in the ISIS kpm, and (2) the behavior of
; the KCLSETTableIniRead function.
;
; Some useful constants:
;
; wScanContrast=32818 ;50 percent
; wScanContrast=1 ;SCN_CONTRAST1
; wScanContrast=2 ;SCN_CONTRAST2
; wScanContrast=4 ;SCN_CONTRAST3
; wScanContrast=8 ;SCN_CONTRAST4
; wScanContrast=16 ;SCN_CONTRAST5
; wScanContrast=32 ;SCN_CONTRAST6
; wScanContrast=64 ;SCN_CONTRAST7
; wScanContrast=128 ;SCN_CONTRAST8
; wScanPaperSource=1 ;SCN_SFLAT
[Fujitsu fi-4750C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32
[Fujitsu fi-5750C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[Fujitsu M3091DC-VRSISIS-KPMSPEC]
wScanContrast=32834 ;66%
wScanDensity=32818 ;The ISIS driver doesn't use a Brightness value when scanning in Grayscale
[Fujitsu M3092DC-VRSISIS-KPMSPEC]
wScanContrast=4 ;SCN_CONTRAST3
wScanDensity=32818 ;The ISIS driver doesn't use a Brightness value when scanning in Grayscale
[Fujitsu M3093GX-VRSISIS-KPMSPEC]
wScanContrast=8 ;SCN_CONTRAST4
wScanDensity=16 ;SCN_DENSITY5
[Fujitsu ScanPartner 93GX-VRSISIS-KPMSPEC]
wScanContrast=8 ;SCN_CONTRAST4
wScanDensity=16 ;SCN_DENSITY5
[HP ScanJet 6250C-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=8
[HP ScanJet 6300C-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_AUTO_CONTRAST
wScanDensity=8 ;SCN_AUTO_DENSITY
[HP ScanJet 6350C-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=8
[HP Scanjet 8290-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[HP Scanjet 7800-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32823
[HP Scanjet 8300-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32828
[HP Scanjet N9120-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32828
[Kodak DS 1500-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Canon DR-3080C-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Canon DR-5080C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Canon DR-6080-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32832
[Canon DR-9080C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32825 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Canon DR-4080U-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Panasonic KV-S6040W (white background)-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Panasonic KV-S6045W (white background)-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Panasonic KV-S6040W (black background)-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Panasonic KV-S6045W (black background)-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Panasonic KV-S2065W-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
[Panasonic KV-S6055W-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=8 ;SCN_DENSITY4
[Panasonic KV-S6050W-VRSISIS-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=8 ;SCN_DENSITY4
[Panasonic KV-S2025C/KV-S2026C-VRSISIS-KPMSPEC]
wScanContrast=32 ;SCN_CONTRAST6
wScanDensity=32831 ;63 percent
[Panasonic KV-S2045C/KV-S2046C-VRSISIS-KPMSPEC]
wScanContrast=32 ;SCN_CONTRAST6
wScanDensity=32 ;SCN_DENSITY6
[Bell & Howell 500FB-VRSISIS-KPMSPEC]
wScanContrast=8 ;SCN_CONTRAST4
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Ricoh IS-01-VRSISIS-KPMSPEC]
wScanContrast=8 ;SCN_CONTRAST4
wScanDensity=16 ;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
[Ricoh IS-330-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=16
[Epson GT-30000-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=8
[Kodak I50-VRSISIS-KPMSPEC]
wScanContrast=8
wScanDensity=8
[Kodak I60-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[Kodak I80-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[Fujitsu fi-4110CU-VRSISIS-KPMSPEC]
wScanContrast=4
wScanDensity=16
[Kodak DS 2500-VRSISIS-KPMSPEC]
wScanContrast=8
wScanDensity=8
[Bell & Howell 730DC FB-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=16
[Fujitsu fi-4640S-VRSISIS-KPMSPEC]
wScanContrast=32820
wScanDensity=32818
[Fujitsu M3093DG-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[Canon DR-3060-VRSISIS-KPMSPEC]
wScanContrast=8
wScanDensity=16
[Fujitsu fi-4340C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=16
[Visioneer 9650 USB-VRSISIS-KPMSPEC]
wScanContrast=8
wScanDensity=32790
[Fujitsu fi-4120C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32825
[Fujitsu fi-4220C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32825
[Fujitsu fi-4530C-VRSISIS-KPMSPEC]
wScanContrast=32818
wScanDensity=32818
[Canon DR-2080C-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=16
[Canon DR-4580U-VRSISIS-KPMSPEC]
wScanContrast=16
wScanDensity=8
[Kodak i200 Series-VRSISIS-KPMSPEC]
wScanContrast=32818 ;SCN_CONTRAST50%
wScanDensity=32803 ;SCN_DENSITY50%
[Kodak i280-VRSISIS-KPMSPEC]
wScanContrast=32818 ;SCN_CONTRAST50%
wScanDensity=32818 ;SCN_DENSITY50%
[Panasonic KV-S7065C-VRSISIS-KPMSPEC]
wScanContrast=32818 ;50 Percent
wScanDensity=32825 ;58 Percent
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are the <scanner name>-VRSISIS-ISISSET sections.
;
; Format of section name:
; [<scanner name>-VRSISIS-ISISSET]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VRSISIS-ISISSET]
;
; The appropriate section is read every time the
; scanner is reserved. These items are used to set
; the ISIS driver for proper SVRS operation. These
; sections are intended to be used any ISIS setting (TAG)
; for which there is *NO* corresponding ISIS kpm setting.
;
; The format of the items in these sections is dependent on
; (1) the scanner's ISIS driver, and (2) the PixTagRestoreFile
; function of the ISIS toolkit.
;
; Each section has some useful constants included as comments.
; The items that will work for one scanner may not work for a
; different scanner.
;
[Canon DR-2080C-VRSISIS-ISISSET]
Gamma=0 ; Gamma = Standard
TagAutoSize=1 ; Detect Page Size = Checked
Deskew=0 ; Deskew = Unchecked
CropDetect=0 ; Border Removal = Unchecked
EdgeEmphasisIntensity=1 ; Edge Emphasis = Soft (slider at leftmost position)
DropOut(-1)=0 ; Dropout colors all set to None
DropOut(0)=0
DropOut(1)=0
[Fujitsu fi-4750C-VRSISIS-ISISSET]
Backing(1)=3
DetectPageLength=1
WhiteFollow(-1)=0
WhiteFollow(1)=2
Gamma(-1)=1
Gamma(1)=1
[Fujitsu fi-5750C-VRSISIS-ISISSET]
Backing=3 ; Black background for Both sides
OverscanEnable=1 ; Enable overscan
DetectPageLength=1 ; Enable Page Length detection
WhiteFollow=2 ; Off
Cropping=0 ; Dont use the scanners cropping
BlackBorderRemoval=0 ; Dont use the scanners border removal
Gamma=0 ; Normal
[Fujitsu M3091DC-VRSISIS-ISISSET]
DropoutColor=2 ;Green (normal)
Emphasis=1 ;Low
;DropoutColor=1 ;Red
;DropoutColor=3 ;Blue
;KeepLampOn=0 ;Lamp Power Save Mode ON
;KeepLampOn=1 ;Lamp Power Save Mode OFF
[Fujitsu M3092DC-VRSISIS-ISISSET]
DropoutColor=2 ;Green (normal)
Emphasis=1 ;Low
;DropoutColor=1 ;Red
;DropoutColor=3 ;Blue
;KeepLampOn=0 ;Lamp Power Save Mode ON
;KeepLampOn=1 ;Lamp Power Save Mode OFF
[Kodak DS 1500-VRSISIS-ISISSET]
Emphasis(1)=0
Tag 5084(1)=1
;Tag 1403(1)=1 ;Detect Page Size ON
;Tag 5084(1)=1 ;Length Control ON (Auto length detection)
;Tag 5084(1)=0 ;Length Control OFF
;Tag 5048(1)=0 ;Detect Double Feed OFF
;Tag 5048(1)=1 ;Detect Double Feed ON
;Tag 5368(1)=0 ;Detect Double Feed Sensitivity Low
;Tag 5368(1)=1 ;Detect Double Feed Sensitivity Normal
;Tag 5368(1)=2 ;Detect Double Feed Sensitivity High
;Tag 1401(1)=0 ;Mirror Image OFF
;Tag 1401(1)=1 ;Mirror Image ON
;Couldn't get Reverse Image to work for some reason
;so it is not included.
[Kodak DS 2500-VRSISIS-ISISSET]
Emphasis(1)=3
Tag 5084(1)=1
[Canon DR-3080C-VRSISIS-ISISSET]
DetectPageSizeEx=1
Margin=1
MarginLength=10
[Canon DR-5080C-VRSISIS-ISISSET]
;DetectPageSize=1
DetectPageSize=0
ColorDropout=None
;ColorDropout=Red
;ColorDropout=Green
;ColorDropout=Blue
;Margin=1
Margin=0
;MarginMM=10
MarginMM=0
BackgroundEraseIntensity(1)=7;AE
;EdgeEmphasisIntensity(1)=1 ;EE
EdgeEmphasisIntensity(1)=3 ;EE
ScanningSpeed(0)=0 ;High Speed Scanning OFF
;ScanningSpeed(0)=1 ;High Speed Scanning ON
[Canon DR-6080-VRSISIS-ISISSET]
PageSize=
DropOut(-2)=0
DropOut(-1)=0
DropOut(0)=0
DropOut(1)=0
DropOut(2)=0
Deskew=0
CropDetect=0
CropMethod=0
Margin=1
Marginmm=6
AutoDeskew=0
BrightnessBackEnabled=1 ; Enabled Backside Brightness adjustment
BrightnessManualBack=110 ; Set backside brightness to this value (1 to 255)
BrightnessAutoBack=0
EdgeEmphasis=0
EdgeEmphasisIntensity=3 ; 1 = Soft, 2 = Soft+, 3 = Midpoint, 4 = Midpoint+, 5 = Sharp
Gamma=0 ; 0 = Disabled, 1 = Enabled
GammaModeGrayFront=1 ; Only valid if Gamma=1
GammaModeGrayBack=1 ; Only valid if Gamma=1
GammaModeRedFront=1 ; Only valid if Gamma=1
GammaModeGreenFront=1 ; Only valid if Gamma=1
GammaModeBlueFront=1 ; Only valid if Gamma=1
GammaModeRedBack=1 ; Only valid if Gamma=1
GammaModeGreenBack=1 ; Only valid if Gamma=1
GammaModeBlueBack=1; Only valid if Gamma=1
GammaFactorGrayFront=1 ; Only valid if Gamma=1
GammaFactorGrayBack=1 ; Only valid if Gamma=1
GammaFactorRedFront=1 ; Only valid if Gamma=1
GammaFactorGreenFront=1 ; Only valid if Gamma=1
GammaFactorBlueFront=1 ; Only valid if Gamma=1
GammaFactorRedBack=1 ; Only valid if Gamma=1
GammaFactorGreenBack=1 ; Only valid if Gamma=1
GammaFactorBlueBack=1 ; Only valid if Gamma=1
[Canon DR-9080C-VRSISIS-ISISSET]
PageSize=
DropOut(-2)=0
DropOut(-1)=0
DropOut(0)=0
DropOut(1)=0
DropOut(2)=0
Deskew=0
CropDetect=0
CropMethod=0
Margin=1
Marginmm=6
AutoDeskew=0
BrightnessBackEnabled=0
BrightnessManualBack=128
BrightnessAutoBack=0
EdgeEmphasis=0
EdgeEmphasisIntensity=3 ; 1 = Soft, 2 = Soft+, 3 = Midpoint, 4 = Midpoint+, 5 = Sharp
Gamma=0 ; 0 = Disabled, 1 = Enabled
GammaModeGrayFront=1 ; Only valid if Gamma=1
GammaModeGrayBack=1 ; Only valid if Gamma=1
GammaModeRedFront=1 ; Only valid if Gamma=1
GammaModeGreenFront=1 ; Only valid if Gamma=1
GammaModeBlueFront=1 ; Only valid if Gamma=1
GammaModeRedBack=1 ; Only valid if Gamma=1
GammaModeGreenBack=1 ; Only valid if Gamma=1
GammaModeBlueBack=1; Only valid if Gamma=1
GammaFactorGrayFront=1 ; Only valid if Gamma=1
GammaFactorGrayBack=1 ; Only valid if Gamma=1
GammaFactorRedFront=1 ; Only valid if Gamma=1
GammaFactorGreenFront=1 ; Only valid if Gamma=1
GammaFactorBlueFront=1 ; Only valid if Gamma=1
GammaFactorRedBack=1 ; Only valid if Gamma=1
GammaFactorGreenBack=1 ; Only valid if Gamma=1
GammaFactorBlueBack=1 ; Only valid if Gamma=1
[Canon DR-4080U-VRSISIS-ISISSET]
Emphasis(1)=0 ;Image Emphasis = None
Tag 5084(1)=1 ;Length Control ON
[Panasonic KV-S6040W (white background)-VRSISIS-ISISSET]
Emphasis(1)=0 ;Image Emphasis = None
Tag 5084(1)=1 ;Length Control ON
[Panasonic KV-S6045W (white background)-VRSISIS-ISISSET]
Emphasis(1)=0 ;Image Emphasis = None
Tag 5084(1)=1 ;Length Control ON
[Panasonic KV-S6040W (black background)-VRSISIS-ISISSET]
Emphasis(1)=0
Tag 5084(1)=1
[Panasonic KV-S6045W (black background)-VRSISIS-ISISSET]
Emphasis(1)=0
Tag 5084(1)=1
[Panasonic KV-S2065W-VRSISIS-ISISSET]
LengthControl=1
WhiteLevel=128
ImgEmphasis=0
[Panasonic KV-S6055W-VRSISIS-ISISSET]
LengthControl=1
ImgEmphasis=0
[Panasonic KV-S6050W-VRSISIS-ISISSET]
LengthControl=1
ImgEmphasis=0
[Panasonic KV-S2025C/KV-S2026C-VRSISIS-ISISSET]
LengthControl=1 ; Length Control ON
ImgEmphasis=0 ; Image Emphasis = None
Gamma=7 ; Gamma = Gamma for CRT (default value)
WhiteLevel=0 ; White Level = Off
[Panasonic KV-S2045C/KV-S2046C-VRSISIS-ISISSET]
LengthControl=1 ; Length Control ON
ImgEmphasis=0 ; Image Emphasis = None
Gamma=7 ; Gamma = Gamma for CRT (default value)
WhiteLevel=0 ; White Level = Off
[Ricoh IS-330-VRSISIS-ISISSET]
DropoutColor(-1)=0
DropoutColor(1)=0
DetectPageSize=1
[Fujitsu M3093GX-VRSISIS-ISISSET]
Tag 1445(1)=2
[Fujitsu ScanPartner 93GX-VRSISIS-ISISSET]
Tag 1445(1)=2
[Ricoh IS-01-VRSISIS-ISISSET]
Tag 1295(1)=2
[Canon DR-3060-VRSISIS-ISISSET]
DetectPageSizeEx=1
Margin=1
MarginLength=10
EdgeEmphasisIntensity=1
[Bell & Howell 500FB-VRSISIS-ISISSET]
Tag 1295(1)=2
[Fujitsu fi-4640S-VRSISIS-ISISSET]
DetectPageLength=1
WhiteFollow(0)=2
Gamma(0)=1
Backing(0)=3
[Bell & Howell 730DC FB-VRSISIS-ISISSET]
DropoutColor(-1)=0
DropoutColor(1)=0
DetectPageSize=1
[Fujitsu M3093DG-VRSISIS-ISISSET]
Tag 5084(1)=1
Tag 1440(1)=0
Tag 1440(-1)=0
Tag 1301(1)=0
Tag 1445(1)=2 ; White Level Follow = Off
Tag 1301(1)=0 ; Gamma = Default
[Fujitsu fi-4340C-VRSISIS-ISISSET]
OverscanEnable=1
Backing(1)=3
DetectPageLength=1
WhiteFollow(-1)=1
WhiteFollow(1)=2
Gamma(-1)=1
Gamma(1)=1
[Fujitsu fi-4120C-VRSISIS-ISISSET]
DetectPageLength=1
Gamma=3
CustomGamma=13
[Fujitsu fi-4220C-VRSISIS-ISISSET]
DetectPageLength=1
Gamma=3
CustomGamma=13
[Fujitsu fi-4530C-VRSISIS-ISISSET]
DetectPageLength=1 ; Enable Page Length Dectection
Gamma=3 ; Custom Gamma settings
CustomGamma=12 ; Gamma = 1.2
Shadow=10 ; Part of Custom Gamma
Highlight=230 ; Part of Custom Gamma
OverscanEnable=1; Black background on front and back
Emphasis(-1)=0 ; Edge Processing = None
Emphasis(0)=0
Emphasis(1)=0
Cropping=0 ; Disable Automatic Crop and Deskew
[Canon DR-4580U-VRSISIS-ISISSET]
LengthControl=1
ImgEmphasis=0
[HP Scanjet 8290-VRSISIS-ISISSET]
Gamma=0
[HP Scanjet 7800-VRSISIS-ISISSET]
Gamma=0 ; None, 1 = Use Download
Dither=None
LampTimer=0 ; Instant Lamp Warmup
[HP Scanjet 8300-VRSISIS-ISISSET]
Gamma=0 ; None, 1 = Use Download
Dither=None
LampTimer=0 ; Instant Lamp Warmup
[HP Scanjet N9120-VRSISIS-ISISSET]
BackgroundColor=2 ;Set background to black. 1 = White
Gamma=0 ; None, 1 = Use Download
Dither=None
LampTimer=0 ; Instant Lamp Warmup
[Kodak i200 Series-VRSISIS-ISISSET]
JpegQuantization(-2)=1
JpegQuantization(-1)=1
JpegQuantization(0)=1
JpegQuantization(1)=1
JpegQuantization(2)=1
ColorToGray(-2)=1
ColorToGray(-1)=1
ColorToGray(0)=1
ColorToGray(1)=1
ColorToGray(2)=1
TransportTimeout=3
EnergySaverEnable=1
EnergySaver=60
CameraEnableFC=1
CameraEnableBC=1
OverScanPixel(-1)=1200 ; Overscan backside 0.375 inches
OverScanPixel(1)=1200 ; Overscan frontside 0.375 inches
OverScanInch(-1)=1 ; Overscan backside measured in inches
OverScanInch(1)=1 ; Overscan frontside measure in inches
ColorTable(0)=Mixed
[Kodak i280-VRSISIS-ISISSET]
JpegQuantization(-2)=1
JpegQuantization(-1)=1
JpegQuantization(0)=1
JpegQuantization(1)=1
JpegQuantization(2)=1
ColorToGray(-2)=1
ColorToGray(-1)=1
ColorToGray(0)=1
ColorToGray(1)=1
ColorToGray(2)=1
TransportTimeout=3
EnergySaverEnable=1
EnergySaver=60
CameraEnableFC=1
CameraEnableBC=1
OVSEnableXY(0)=1
OVSEnableXY(1)=1
OVSEnableY(0)=1
OVSEnableY(1)=1
OVSEnableX(0)=1
OVSEnableX(1)=1
YOverScanPixel(0)=450
YOverScanPixel(1)=450
YOverscanInch(0)=450
YOverscanInch(1)=450
XOverScanPixel(0)=450
XOverScanPixel(1)=450
XOverscanInch(0)=450
XOverscanInch(1)=450
ColorTable(0)=Mixed 2
[Panasonic KV-S7065C-VRSISIS-ISISSET]
Margin=1 ; Enable Margin option
Crop2=0 ; No cropping
BorderRemoval=0 ;
Deskew2=0
DeskewOption=0
LengthControl=0
WhiteLevel=0
FitToPage=0
ImgEmphasis(-2)=2 ; Medium
ImgEmphasis(-1)=2
ImgEmphasis(1)=2
ImgEmphasis(2)=2
Gamma(-1)=7 ; Gamma for CRT
Gamma(1)=7
GrayModeDropOutEnable=1 ; Enable Color Dropout
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are the <scanner id tag>-VRSTWAIN-KPMSPEC sections.
;
; Format of section name:
; [<scanner name>--VRSTWAIN-KPMSPEC]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VRSISIS-ISISSET]
;
; The appropriate section read every time the
; scanner is reserved. These items are used to set
; the TWAIN kpm's private spec variables for proper
; SVRS operation. These sections are intended to
; be used with any TWAIN setting (CAP) for which there is a
; corresponding TWAIN kpm setting.
;
; The format of the items in these sections is
; dependent on two things: (1) the definition of the
; KCL table in the TWAIN kpm, and (2) the behavior of
; the KCLSETTableIniRead function.
;
; Some useful constants:
;
; wScanContrast=32818 ;50 percent
; wScanContrast=1 ;SCN_CONTRAST1
; wScanContrast=2 ;SCN_CONTRAST2
; wScanContrast=4 ;SCN_CONTRAST3
; wScanContrast=8 ;SCN_CONTRAST4
; wScanContrast=16 ;SCN_CONTRAST5
; wScanContrast=32 ;SCN_CONTRAST6
; wScanContrast=64 ;SCN_CONTRAST7
; wScanContrast=128 ;SCN_CONTRAST8
; wScanPaperSource=1 ;SCN_SFLAT
[GLORY FU TWAIN-VRSTWAIN-KPMSPEC]
wScanDensity=32818 ;50 percent (for Sample purposes only)
[Glory FU-1-VRSTWAIN-KPMSPEC]
wScanContrast=16
wScanDensity=8
[Canon CanoScan N650U/N656U-VRSTWAIN-KPMSPEC]
wScanContrast=8
wScanDensity=4
[Epson Perfection 1640SU with ADF-VRSTWAIN-KPMSPEC]
wScanContrast=256 ;SCN_AUTO_CONTRAST
wScanDensity=256 ;SCN_AUTO_DENSITY
[Fujitsu ScanPartner 15C-VRSTWAIN-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
[Fujitsu ScanPartner 620C-VRSTWAIN-KPMSPEC]
wScanContrast=16 ;SCN_CONTRAST5
wScanDensity=16 ;SCN_DENSITY5
[Canon CanoScan N1220U-VRSTWAIN-KPMSPEC]
wScanContrast=8 ;SCN_CONTRAST4
wScanDensity=4 ;SCN_DENSITY4
[HP ScanJet 7400C-VRSTWAIN-KPMSPEC]
wScanContrast=256 ;SCN_AUTO_CONTRAST
wScanDensity=256 ;SCN_AUTO_DENSITY
[HP ScanJet 7450C-VRSTWAIN-KPMSPEC]
wScanContrast=256 ;SCN_AUTO_CONTRAST
wScanDensity=256 ;SCN_AUTO_DENSITY
[HP ScanJet 7490C-VRSTWAIN-KPMSPEC]
wScanContrast=256 ;SCN_AUTO_CONTRAST
wScanDensity=256 ;SCN_AUTO_DENSITY
[Fujitsu fi-4010CU-VRSTWAIN-KPMSPEC]
wScanContrast=32818 ;SCN_AUTO_CONTRAST
wScanDensity=32818 ;SCN_AUTO_DENSITY
; Valid values are 32811 through 32825.
; These equate to the values 1, 9, 29, 49, 69, 89, 109, 128, 148, 168, 188, 208, 228, 248, 255
[Kodak i600 Series-VRSTWAIN-KPMSPEC]
wScanContrast=32818 ;SCN_AUTO_CONTRAST
wScanDensity=32818 ;SCN_AUTO_DENSITY
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are the <scanner id tag>-VRSTWAIN-TWAINSET sections.
;
; Format of section name:
; [<scanner name>--VRSTWAIN-KPMSPEC]
; where <scanner name> is the name of the scanner as appearing
; in the [ScannerNames] section in this file.
; e.g.: [Fujitsu M3091DC-VRSISIS-ISISSET]
;
; The appropriate section is read every time the
; scanner is reserved. These items are used to set
; the ISIS driver for proper SVRS operation. These
; sections are intended to be used any TWAIN setting (CAP)
; for which there is *NO* corresponding TWAIN kpm setting.
;
; The format of the items in these sections is dependent on
; the scanner's TWAIN driver.
;
; Each section has some useful constants included as comments.
; The items that will work for one scanner may not work for a
; different scanner.
;
[EPSON TWAIN 5-VRSTWAIN-TWAINSET]
ICAP_GAMMA=2.2 ;Gamma Correction (for Sample purposes only)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are added for the VRS 3.1 Wise Component Install
;
; Format of section name:
; [Scanner Component Installs]
; Every new scanner added after 3.05 will have a Wise component install
; and will add an entry in this section to indicate the Wise install.
;
[Scanner Component Installs]
Panasonic KV-S2025C/KV-S2026C=CI-KV-S2025C2026C.EXE
Panasonic KV-S2045C/KV-S2046C=CI-KV-S2045C2046C.EXE
Fujitsu fi-4530C=CI-fi-4530C.EXE
Fujitsu M4097D (Hardware)=CI-Fujitsu-M4097D.exe
Fujitsu M4099D (Hardware)=CI-Fujitsu-M4099D.exe
Fujitsu fi-4750C (Hardware)=CI-fi-4750C.exe
Fujitsu fi-4750L (Hardware)=CI-fi-4750L.exe
Kodak I80=CI-Kodak-I80.exe
Canon DR-6080=CI-DR-6080.exe
Canon DR-9080C=CI-DR-9080C.exe
Fujitsu fi-5750C=CI-fi-5750C.exe
Panasonic KV-S7065C=CI-KV-7065C.exe
Kodak i280=CI-Kodak-i280.exe
HP Scanjet 7500=CI-HP-7500.exe
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Following are added for the VRS 3.1 Wise Component Install
;
; Format of section name:
; [Non-SCSI Scanners]
; Every VRS scanner that doesn not require SCSI connection will have a key here and
; a value of 1 here.
;
[Non-SCSI Scanners]
Canon CanoScan N1220U=1
Canon CanoScan N650U/N656U=1
Fujitsu fi-4110CU=1
Visioneer 9650 USB=1
HP ScanJet 7400C=1
HP ScanJet 7450C=1
HP ScanJet 7490C=1
Kodak i200 Series=1
Kodak i600 Series=1
Kodak i280=1
HP Scanjet 7000=1
HP Scanjet 7500=1
HP Scanjet 7800=1
HP Scanjet 8290=1
HP Scanjet 8300=1
HP Scanjet N9120=1
Seguimiento del informe anterior…
5 sistemas.
3 complejidades. Lectura de la normatividad, Identificar particularidades del proceso; roles y funciones, etc. Y 3 la carencia de la documentación (mapeo del proceso respecto a lo que el sistema hace)
Revisar la normatividad…80 hrs.
Mapear el proceso… 40 hrs.
Mapear la funcionalidad vs. El proceso que ya tienes mapeado. 80 hrs.
1200 hrs.
Brechas entre funcionalidad del sistema vs proceso.
Para documentar 80 hrs mas
10