SCT2500Self Contained Hydraulic Clutch
Bringing you the next generation ofdiesel engine clutchesOver 15 years ago, PT Tech’s microprocessor controlled HPTO clutches defined a new approach to diesel engine driven equipment. With the evolution of the HPTO product, the SCT2500 is redefining the industry standard by bringing Equipment Manufacturers a simpler solution with less integration and greater uptime.
SCT2500Product SpecificationsMaximum Prime Mover Torque
Maximum Input Power
Maximum Operating Input Speed
Maximum Engagement Speed
Bellhousing Size
Maximum Side Load
Input Voltage RangeOperating Temperature Limits
Drive Orientation
2,500 Nm (1,844 lb-ft)
410 kW (550 hp)
2,250 rpm
1,100 rpm
SAE#1
27.8 kN (6,250 lb)
9-32 VDC-20 °F – 226 °F
Direct and Transverse
SCT2500 Product Information
Performance Capabilities
Electrical Connections 6
Electrical Interface
Ease of Integration
New TechnologyHydraulic ActuatorCompletely eliminates the need for an external hydraulic power source
Greater Uptime = Cost Savings
Patented Energy Management LogicMonitors real-time parameters to protect the clutch and keep your machine operating smoothly
Non-Adjustable Speed SensorsPre-installed, no depth adjustment required
Advanced Friction Disc PackIncreased thermal capacity for tough applications
Radio Frequency Identification (RFID) TagOperational history is stored on the SCT Clutch
Internal Oil PumpProvides direct lubrication to bearings for lower operating temperature and extended bearing life
All-In-One PackageController and Hydraulic Actuator are mounted directly on the SCT Clutch
SCT Clutch FootprintShort package for compact machine design
Hydraulic IntegrationSCT requires zero connections to OEM hydraulic system
Electrical IntegrationThe self-contained electrical system requires only eight wiresfor successful machine integration
Improved System EfficiencyInternal gerotor pump only provides lubrication when needed
Enhanced Oil SealsStandard dual output shaft seals handle the harshest environments
PT Tech, Inc. 1441 Wolf Creek Trail, P.O. Box 305 Sharon Center, OH 44274Phone: (330) 239-4933Website: www.pttech.com Powering Innovation
DimensionsClutchModel A B C D E KeywayWeight
SCT25XA1XXXAX-XX
SCT25XB1XXXAX-XX
320 [145]
322 [146]
19.46 [494.28]
18.46 [468.88]
13.58 [344.93]
13.58 [344.93]
5.625 [142.88]
4.625 [117.48]
5.15 [130.81]
4.15 [105.41
Ø3.542-3.543 [89.97-89.99]
DIN 6885
DIN 6885
Ø3.542-3.543 [89.97-89.99]