SCW curtainwall system
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 1
to
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SCW curtain wall system has been designed to meetcurrent building regulations. It is a semi unitised, zonedrained and pressure equalized system and offers a slim50mm sightline, with a choice of 3 mullion and 4 transomdepths. The system is capable of being fabricated intoladders for quick assembly on site and of accepting glazingup to 28mm thick depending on weight. Other profiles can beincorporated giving flexibility of design.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SCW curtain wall sections are available typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour, and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
SCW framing is constructed using mechanical methods atbutt joints, assembling using stainless steel self-tappingscrews into integral screw ports extruded into the body of the sections, directly through square cut adjoiningcomponent parts. A proprietary sealant is used on all metal tometal joints and gasket to gasket joints during assembly inline with good practice.
Vertical sections are designed to run through which enablesindividual panels to be made separately and assembled onsite for large or multi-panel frames.
Optional shear blocks are available for joint and sectional re-inforcing or expansion joints and larger spans, over 1200mm.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Air Permeability
Water Tightness
Wind Resistance
600 Pa (Class C)
600 Pa
2400 Pa
Thickness 6mm 28mm
Weather RatingBS6375 Part 1
Glazing
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SCW when used on projects involved in a BREEAMassessment, or within the Code for the SustainableBuilt Environment and the Code for SustainableHomes (which therefore involves the Green Guide tospecification) can offer significant benefits.
Average U Values
Due to the variety of profiles, mullion spacings, glassand panel specifications on each project; a specificU-value calculation will be required. Please contactour Technical Department or Architectural Advisors.
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 12/3/12 15:01 Page 2
SCW+ curtainwall system
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 3
toThickness 6mm 28mm
Glazing
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Weather Rating
CWCT Sequence B
EN13830:2003
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SCW+ curtain wall system has been designed with enhancedthermal performance and to meet current building regulations. Itis semi unitised, zone drained and pressure equalized and offersa slim 50mm sightline, with a choice of 3 mullion and 4 transomdepths. The system is capable of being fabricated into ladders forquick assembly on site and can accept a variety of glazing types.Other profiles can be incorporated giving flexibility of design.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SCW+ curtain wall sections are available typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour, and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
SCW+ framing is constructed using mechanical methods atbutt joints, assembling using stainless steel self-tappingscrews into integral screw ports extruded into the body of the sections, directly through square cut adjoiningcomponent parts. A proprietary sealant is used on all metal tometal joints and gasket to gasket joints during assembly inline with good practice.
Vertical sections are designed to run through which enablesindividual panels to be made separately and assembled onsite for large or multi-panel frames.
Optional shear blocks are available for joint and sectional re-inforcing or expansion joints and larger spans, over 1200mm
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Average U Values
Due to the variety of profiles, mullion spacings, glassand panel specifications on each project; a specificU-value calculation will be required. Please contactour Technical Department or Architectural Advisors.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SCW+ when used on projects involved in a BREEAMassessment, or within the Code for the SustainableBuilt Environment and the Code for SustainableHomes (which therefore involves the Green Guide tospecification) can offer significant benefits.
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 4
SMR800 curtainwall system
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 7
toThickness 6mm 28mm
Glazing
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Weather Rating
CWCT Sequence B
EN13830:2003
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SMR800 curtain wall system has been designed withenhanced thermal performance and to meet current buildingregulations. It is a stick system, zone drained and pressureequalized and offers a 50mm sightline, with a standardchoice of 6 mullion and 6 transom depths. The system isdesigned for quick assembly on site and to accept glazing up to 28mm thick depending on weight. Specific profiles can be incorporated offering flexibility of design.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SMR800 curtain wall sections are available typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour, and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
SMR800 framing is constructed using mechanical methodsat butt joints. A proprietary sealant is used on all metal tometal joints and gasket to gasket joints during assembly inline with good practice.
Vertical sections are designed to run through which enablesindividual panels to be made separately and assembled onsite for large or multi-panel frames.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Average U Values
Due to the variety of profiles, mullion spacings, glassand panel specifications on each project; a specificU-value calculation will be required. Please contactour Technical Department or Architectural Advisors.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SMR800 when used on projects involved in aBREEAM assessment, or within the Code for the Sustainable Built Environment and the Code for Sustainable Homes (which therefore involves the Green Guide to specification) can offer significant benefits.
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 12/3/12 15:03 Page 8
Hybrid series 3 compositecurtain wall system
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 9
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
Hybrid Series 3 curtain wall has been designed to meet current andfuture building regulations, with impressive thermal performance.Hybrid is a high insulation timber/aluminium composite systemmanufactured in the UK, complete with a selection of window, curtainwalling and door options. It combines the long life and lowmaintenance of aluminium externally with the high insulation,environmentally focused benefits of responsibly sourced engineeredtimber internally. Hybrid Series 3 curtain wall framing is a traditionalstick, compartmentally drained system and is capable of acceptingglazing up to 28mm thick depending on weight.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.• Timber profiles are certified by MPA Stuttgart with quality class
BS11, laminated according to DIN1502 using weather proofand heat proof melamine glue; humidity 12% +/-2%; onlylamellas without fault are laminated. Finger joints in outer layermin 500mm centres. PEFC /04-32-0042 certified. Timberprofiles are matt lacquered 150-300 microns wet film thickness.
Finishes
Hybrid Series 3 curtain wall sections are available typically in4 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 - paintedin house. Surface finish at 40 microns standard, or enhanced to 60microns for marine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to a minimumof 25 microns (AA25), supplied in either satin or polished finish in alimited range of colours.
• Mill finish.
• Clear lacquered or painted timber
Construction
Hybrid series 3 framing is constructed using mechanical methods at butt joints. A proprietary sealant is used on all metal to metaljoints and gasket to gasket joints during assembly in line with good practice.
Vertical sections are designed to run through which enablesindividual panels to be made separately and assembled on site forlarge or multi-panel frames.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant with BS EN ISO19001, BS EN ISO 14001 and OHSAS 18001 Standards.
Hybrid when used on projects involved in a BREEAMassessment, or within the Code for a Sustainable BuiltEnvironment and the Code for Sustainable Homes (whichtherefore involves the Green Guide to specification) canoffer significant benefits. For project specific assistance,please contact our specification team.
to
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Thickness 6mm 28mm
Weather Rating
CWCT Sequence B
EN13830:2003
Glazing
Average U Values
Due to the variety of profiles, mullion spacings, glassand panel specifications on each project; a specificU-value calculation will be required. Please contactour Technical Department or Architectural Advisors.
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 10
SMR900 curtainwall system
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 6/3/12 14:04 Page 5
toThickness 6mm 28mm
Glazing
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Weather Rating
CWCT Sequence B
EN13830:2003
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SMR900 curtain wall system has been designed withenhanced thermal performance and to meet current buildingregulations. It is a stick system, zone drained and pressureequalized and offers a 50mm sightline, with a standardchoice of 6 mullion and 6 transom depths. The system is capable of being fabricated for quick assembly on site and to accept glazing up to 28mm thick depending on weight. Specific profiles can be incorporated offeringflexibility of design.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SMR900 curtain wall sections are available typically in 3finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour, and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
SMR900 framing is constructed using mechanical methodsat butt joints. A proprietary sealant is used on all metal tometal joints and gasket to gasket joints during assembly inline with good practice.
Vertical sections are designed to run through which enablesindividual panels to be made separately and assembled onsite for large or multi-panel frames.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Average U Values
Due to the variety of profiles, mullion spacings, glassand panel specifications on each project; a specificU-value calculation will be required. Please contactour Technical Department or Architectural Advisors.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SMR900 when used on projects involved in aBREEAM assessment, or within the Code for the Sustainable Built Environment and the Code for Sustainable Homes (which therefore involves the Green Guide to specification) can offer significant benefits.
10468.09 SAS TECHNICAL 2PP_NEW_CW.qxp:Layout 1 12/3/12 15:06 Page 6