Date post: | 19-Dec-2015 |
Category: |
Documents |
View: | 212 times |
Download: | 0 times |
• Support• E-mail: [email protected], you can put your mobile number in the e-mail for better support• Personal: 2C.02 between 10-13
• You can check the current system status at www.itu.dk/it. Do this before you ask for support, your server might be down.
• Username and Password, you should all have gotten this, otherwise contact IT.• You have 1 GB available in your mailbox.• DONT ANSWER PHISHING MAILS• You can forward your e-mail to your “regular” e-mail. You can do it from either
www.itu.dk/it > Self-Service or from https://webmail.itu.dk/selfservice/.• The IT-University expects you to read your e-mail regularly (and so do I!)
SUPPORT AND E-MAIL
• You are allocated a certain amount of credits for printing (the only service that costs money). You can buy more when these are used.
• You can print from all computers and collect in whatever printer you desire.• You can get help from IT to set up your printer on your own computer, and there
is help to be found from their website.
PRINTING
• You are allocated a “Home drive”, with 400 Mb of storage (daily backup).• You can access this drive both from ITU and from home using SSH• Your “Home catalogue”
• Files CAN be read by others!• You can read files in others catalogues• It does have private area, just for you• It has an area, which is accessible from the internet
• Alternatively, use Dropbox (look at www.getdropbox.com)
SAVE YOUR FILES
• DO NOT DOWNLOAD ANYTHING ILLEGAL!!!• If you do this, first your MAC address will be blocked.• If you do it again, it can lead to suspension.• Read more here: http://www1.itu.dk/sw114897.asp
IT-POLITIC AT THE IT-UNIVERSITY
SO ITS ABOUT• Basically the point is to share and backup projects • 'Easy to set up‘
1. Create the repository2. Install the client3. Use it
SET UP YOUR REPOSITORY (1 / 3)1. Download PuTTy (for example)2. Login
• Host name: ssh.itu.dk• Port: 22• Input username and password when prompted (hint: password wont show)
Connect to your repository from Tortoisesvn+ssh://<username>@ssh.itu.dk/import/home/<username>/<folder>
SET UP YOUR REPOSITORY (2 / 3)If you want a shared repository, you send an e-mail to [email protected] with:• Group name• Purpose• User names (ITU mail)• Expire date
If you want to test it, or just want a repository for yourself, then• Use SSH to log into ITU• Use the command “svnadmin create PATH” where PATH is the FULL path of
your desired SVN repository (for example /import/home/username/svn)
USE IT!Basic SVN• Demonstration
Merging• Automated merge• Assisted merge (conflicts)• BUT this can only be done with text files like code and LaTex
Think about this, if you are alone working on a single file, no problem, but if youare 5 guys working on 25 files...
WHAT IS LATEX• Typesetting system• Uses logic to describe the document (almost like code)• Needs to be 'compiled'• Sets up the document at compile time• Chooses the most correct typesetting for you• Has a steeper learning curve• Enables the sharing of work• Can have some annoying things
RESOURCESDownload LaTex for Windows here:http://miktex.org/2.7/setup
Two editors:http://www.texniccenter.org/ (LaTex Editor)http://www.lyx.org/ (A bit “Word’ish”, but still uses LaTex)
Guide to LaTexhttp://tobi.oetiker.ch/lshort/lshort.pdf
Danish beginners guide to LaTexhttp://www.student.dtu.dk/~latex/index.php
SOME GOOD ADVICE• You have to work for it (learning by doing)• It will take some time in the beginning• You will have to search the Internet for some solutions to something (but it will
be there)• Give it a shot
THE LATEX DOCUMENTThe Preamble (the document settings)• Documentclass• Packages• Page styles
Documentclass is the type of the document, are you doing a report, an article. Think of packages of stuff you need to import, before using it... For example if you are going to do math, you need to import that math package. The pagestyles sets up, for example, headers.
The actual documentChapters, sections, text, etc
A SIMPLE LATEX DOCUMENTSimple\documentclass{article}\begin{document}Small is beautiful.\end{document}
There is no packages here, just a documentclass with a class. Save it as a *.Tex file.Either use your IDE to compile it, or use pdflatex (for example pdflatex test.tex, if the path is set correctly).
A “NORMAL” LATEX DOCUMENT\documentclass[a4paper,11pt]{article}\author{H.~Partl}\title{Minimalism}\begin{document}\maketitle\tableofcontents\section{Some Interesting Words}\subsection{Some not so interesting words}\subsubsection{Boring words}Well, and here begins my lovely article.\section{Good Bye World}\ldots{} and here it ends.\end{document}
Now we have a document class with an option and a class (still no packages). We have a title and a table of contents as well.
REFERENCESSetting a reference\label{thisIsAReference}
How to reference it\ref{thisIsAReference}
How to reference to a page with the label on it\pageref{thisIsAReference}
TABLES\begin{table}[htbp]\centering\begin{tabular}{| c | c |}\hlineA & 0.013163485 \\B & 0.003447419 \\\hline\end{tabular}\caption{Average End-to-End Delay (s)}\label{ExpEvaTable1}\end{table}
FIGURESInserting a figure
\begin{figure}[!h]\centering\includegraphics[width=90mm]{picturepath}\caption{First scenario - Two single lines}\label{Super2Line}\end{figure}
WHATS NOWIT-intro exercises1. Create your own repository2. Create and compile a LaTex document3. Insert this LaTex document into your repository
No computer / programs (or not going to use it)• Work on your introweek project
Evaluation• REMEMBER to evaluate! The ONLY way we get better. What you have gone
through is the result of last years evaluation! (And for this check your ITU mail!)