Self-PoweredWireless InstrumentationAccutechRapid deploy wireless instrumentation solutions for telemetry and remote SCADA

Cost-Effective Solutions for Challenging Applications

Knowledge of your process is valuable, but without measure-

ment there is no knowledge. Companies are increasingly

forced to measure process variables that are difficult to reach

and expensive to support. Distance, hazardous environments

and absence of power are just a few of the hurdles faced.

With operational efficiency as the primary goal, the deploy-

ment of self-powered wireless instrumentation provides the

knowledge you need at a price you can handle.

Field Radio

Sensor Network #1 Sensor Network #2

Up to 30 miles (48kM)

BR20

Trio K-Series

Trio Long-Haul Radio

Modbus over serialconnection to RTU

or direct to host

Field Radio

BR20

With a wide range of available instruments for temperature, pressure, flow, level and more, Accutech is ideally suited to any industrial application including upstream oil and gas and outside plant applications in water and wastewater.

Accutech field instruments are easy to install being self contained with power, radio and sensor. The high performance license-free radio and long lasting battery reduces support costs while delivering your valuable data.

03

Take ownership of your field instrument network

Installation of a complete wireless instrument network cannot be easier than using

Accutech, with push button configuration, integrated link tests and rugged

compact designs.

Secure and reliable, high power Frequency Hopping Spread Spectrum radios

provide consistent and dependable network connectivity with long term reliability

and service.

Certified for use in hazardous locations Accutech field instruments can survive in

the most extreme environments of temperature and humidity. All Accutech products

carry a full 3-year warranty.

Flexible and Secure Wireless CommunicationAccutech networks use license-free frequency hopping spread spectrum radios offering superior range of up to 3000ft (~1000m) using standard integrated antennas. Extended reach options include external directional antennas and an integrated Trio™ long haul data radio that offers 256 bit AES encryption.

Easily Configured, Highly Scalable DeploymentEach Accutech base radio can support 100 field instruments with up to 1sec sampling on all instruments. 256 base radios can coexist for almost infinite scalability. Push button configuration and simple link test features allow entire networks to be deployed in hours.

Ease of use, low maintenanceHighly reliable, Accutech instruments are optimally energy efficient devices that allow for up to 10 years operation on a single battery. An advanced warning alarm will provide months of notice before a field replaceable battery is required.

04

Maximize ROI while improving efficiency and safety

Engineered for challenging applications, Accutech networks reduce costs while

eliminating holes in your operational data monitoring.

• Reducinginstallationcosts:Eliminate cabling, trenching and conduit costs.

Internal power means no regenerative power systems.

• Increasedproductivity:Monitor process variables you could not before.

Quick configuration, instant connectivity and little maintenance.

• EnhancedSafety:Integrated field units certified for hazardous locations mean

robust data point monitoring in the toughest environments.

Industry Standard ConnectivityAccutech supports industry-standard Modbus protocol to ensure interoperability with a wide range of industrial equipment and host systems.

Certified Durability and SafetyWith NEMA4 and explosion-proof packaging options, Accutech products are designed for the most demanding applications and are certified CSA Class 1, Div 1 and ATEX/IECex (-ai and -d). External push button interface enables hassle free configuration, while easy access battery cells are field replaceable.

Configure and Monitor from any Network NodeAccutech Manager configuration and management software provides a user-friendly commissioning interface to Accutech networks offering remote configuration, diagnostics, and trending / data collection.*

05

Where traditional instruments fail operational and budget goals, Accutech provides the solution.

A toolset for challenging applications

Accutech offers a versatile selection of instruments and base radios with

performance enhancing options that can satisfy any application. Optional external

sensor configurations allow installation in below ground areas or on process

equipment that is hard to reach. External hi-gain antennas are available for complex

environments where considerable obstructions and ultra long reach are required.

With this kind of flexibility Accutech becomes a key element in any challenging

application:

• Wellhead monitoring (including plunger arrival)

• Gas pipeline leak detection with acoustic monitors

• Tank level measurement (with dual float liquid interface option)

• Environmental monitoring (storm water, irrigation, reservoirs, ...)

• Pressure measurement in any process, from 5psi to 10,000psi.

• Securing remote sites with discreet input switches

• Delivering 4-20mA signals from 3rd party instruments

• More … limited only by imagination

08

Product Overview

Level IO

Accoustic Monitor

Flow

Pressure

BR10Explosion proof

Base radio

AP10Absolute Pressure

GP10Gauge Pressure

TC10Thermocouple

Temperature

BR20DIN Rail Mount

Base Radio

DP20Differential Pressure

RT10RTD Temperature

TM10Turbine Meter

Totalizer

AI10 | AV10Analog Input

SI10Switch Input/Output

4AO, 8SW, 4AO-8SWOutput Modules

AM20Acoustic Monitor

GL10Gauge Level

FL10Float Level

SL10Submersible Level

Base Radio Temperature

09

Specifications

BR10BaseRadio• Explosion-proofhousing• Supports100fieldunits

with 915MHz radio, 40 field units with 869MHz

• SerialModbusviaRS-485• Remoteantennaoption• 9-38VDCinputpower• CSAClass1,Div1(xp)• ATEX/IECEx–d

AP10AbsolutePressure

FieldUnit• Accuracy:±0.1%ofURL• 30psiaand250psiamax

pressure options• NEMA4housing• Remoteantennaand

remote sensor option• CSAClass1,Div1(IS)• ATEX/IECEx–ia

BR20BaseRadio• DINrailmount• Supports100field

units with 915MHz radio, 40 field units with 869MHz

• OptionalTriodataradiofor long haul connectivity with host

• SerialModbusviaRS-485• 11-30VDCinputpower• CSAClass1,Div2• ATEX/IECEx–n

DP20DifferentialPressure

FieldUnit• Accuracy:±0.1%ofURL• Availableinfivedifferent

pressure ranges: • +/- 100in H2O • +/- 300in H2O • -25psi to 25psi • -25psi to 100psi • -25psi to 300psi• NEMA4housing• Remoteantennaoption• CSAClass1,Div1(IS)• ATEX/IECEx–ia

AI10 | AV10Current|Voltage

Multi-InputFieldUnit• Dualcurrent(4-20mA) orvoltage(0–10V)analog inputs

• Includesdualcontactclosure inputs

• Remoteantennaoption• NEMA4enclosure• CSAClass1,Div1(IS)• ATEX/IECEx–ia

FL10FloatLevelFieldUnit• ForusewithSiemens

1000 and 2000 series probes

• ¼”and½”resolutionoptions

• Lengthsupto30’• Singlefloatordualfloat

for liquids interface • NEMA4housing• Remoteantennaoption• CSAClass1,Div1(IS)• AvailableinNorthAmerica

only

AM20AcousticMonitor

FieldUnit• Acousticsensorwith

0-255 range count• Remoteantennaoption• NEMA4housing• CSAClass1,Div1(IS)• ATEX/IECEx–ia

GL10GaugeLevelFieldUnit• Accuracy:±0.1%ofURL• 30psiaand250psiamax

pressure options• Specificgravitycorrection

and multiple units of measure selection

• NEMA4housing• Remoteantennaand

remote sensor option• CSAClass1,Div1(IS)• ATEX/IECEx–ia

10

GP10GaugePressure

FieldUnit• Accuracy:±0.1%ofURL• 250,1000,2500,5000

and 10,000psig• NEMA4housing• Remoteantennaand

remote sensor option• CSAClass1,Div1(IS)• ATEX/IECEx–ia

TC10Thermocouple

TemperatureFieldUnit• TypesB,C,E,J,K,L,N,S,T,U

• Accuracy:±0.1% of reading

• IntegratedsingleT/Corjunction box option that supports dual customer supplied T/Cs

• NEMA4housing• Remoteantennaoption• CSAClass1,Div1(IS)• ATEX/IECEx–ia

RT10RTDTemperature

FieldUnit• Accuracy:±0.1%

of reading• 4wire100or1000ohm

DIN RTD• IntegratedRTDorjunction

box option for customer supplied RTD

• NEMA4housing• Remoteantennaand

remote sensor option• CSAClass1,Div1(IS)• ATEX/IECEx–ia

TM10TurbineMeterTotaliser

FieldUnit• Interfacesmost2-wire

magnetic pickups• Instantaneousflow&

totalised values• Frequency1Hzto10KHz• NEMA4housing• Remoteantennaoption• CSAClass1,Div1(IS)• ATEX/IECEx–ia

SI10SwitchInputFieldUnit• Dualcontactclosureswitch

input with counter function• Counterfrequencyupto

5Hz• Optionaldualswitchdry

contact outputs capable ofswitching1A@30V

• Remoteantennaoption• NEMA4orOptional

Explosion proof enclosure.

• CSAClass1,Div1(IS)formodels without outputs. Div 2 with outputs.

• ATEX/IECEx–iaformodelswithoutoutputs.IECEX-dfor models with outputs

4AO, 8SW, 4AO-8SWOutputModules• Directconnectionbetween

Accutech base radios and DCS or process control systems

• Providesanaloganddiscreet outputs from associated field units

• DINrailmounted.• Stackable(25max,

100 AO, 200 DO)• Threemodelsavailable: • 4channelanalogoutput • 8pointcontactclosure • Combinationof4ch

analog / 8 contact

SL10SubmersibleLevel

FieldUnit• Submersiblehydrostatic

pressure sensor• Accuracy:±0.1%offull-

scale reading• Pressureratingsupto

30psi (2Bar), lengths to75’(15m)

• Venttoatmosphereortotank

• Remoteantennaoption• NEMA4housing• CSAClass1,Div1(IS)• ATEX/IECEx–ia

11

Schneider Electric

Telemetry&RemoteSCADASolutions48 Steacie DriveKanata,ON,K2K2A9,CanadaPhone: +1 (613) 591-1943Fax: +1 (613) 591-1022http://www.controlmicrosystems.com

Document Number M01012-17 June2011tk

This document has beenprinted on recycled paper

© 2

011

Sch

neid

er E

lect

ric. A

ll rig

hts

rese

rved

.

Make the most of your energy

Accutech Wireless