Date post: | 14-Dec-2015 |
Category: |
Documents |
Upload: | braxton-bizzell |
View: | 213 times |
Download: | 1 times |
SE846How to change the nozzle inserts?
1. What is Nozzle Insert ?
Removable filtered tube that sits inside outer nozzle, providing the possibility to customize sound signature.
Nozzle insertBalancedColor : Blue
2. Nozzle insert accessories
Nozzle Removal
Key Nozzle insertBrightColor : White
Nozzle insertWarmColor : Black
Balanced nozzles are the Default
Copyright 2013 Shure Japan Limited All Rights Reserved
There are three types of nozzle insert options: Balanced, Bright and Warm.
3. How to change nozzle insert?
STEP 1: Remove the ear sleeves.
Nozzle collar
Unscrew the nozzle collar with the nozzle key
Nozzle Key
Nozzle collar
STEP 2: Remove Nozzle collar by using Nozzle Removal key.
Nozzle Insert Stainless Steel Nozzle
STEP 3: Pull out the nozzle insert from the stainless steel nozzle.
Removal Nozzle
Push all the way in.
Nozzle Assembly(Stainless nozzle + Nozzle insert)
STEP 4: Change the nozzle insert.
STEP 5: Put nozzle assembly to the earpiece.
Be careful not to drop the nozzle assembly.
Nozzle collar
STEP 6: Install the nozzle collar.
Turn the nozzle key until the nozzle collar securely fits with the earpiece.
Nozzle key
STEP 7: Install the nozzle assembly to earpiece.
Please do the same on the other side.
※ Nozzle insert is very small. Please be careful not to lose them.
STEP 8: Put on the ear sleeve and it’s finished!
Thank you!