P ACIFIC
Environmental
Technology
Membran Filtration Technology
by
Pacific International Development ENVIRONMENTAL TECHNOLOGY
SEA-RO
SEAWATER REVERSE OSMOSIS
Membrane Filtration Technology PID
SEARO – SEAWATER REVERSE OSMOSIS
Seawater desalination systems are reliable and fully automatic units, which serve process or drinking water all over the world. They are constructed with resistant materials and designed to the customers needs. The range goes from small semiautomatic units up to high automatic systems, which contain a huge amount of measuring and control devices.
The concept of modular construction permits a wide range of capacity without the loss of advantage in reliability.
Membrane Filtration Technology PID
SEARO – SEAWATER REVERSE OSMOSIS
The PID SEARO program:
resistant materials like DUPLEX, stainless steel type 1.4539 and polypropylene in piping and pumps
standard containerized or skid mounted systems
non standardized systems for special applications
open intake with all necessary pretreatment systems
beach well with standalone units
offshore systems for boats or transportable units
high qualified engineering staff for commissioning, training and supervision at site
Membrane Filtration Technology PID
Self Cleaning Filter & CIP Equipment
Membrane Filtration Technology PID
Module Block & Energy Recovery System & Pretreatment
Membrane Filtration Technology PID
The seawater is guided by
prepressure pumps through the
coarse filter system and after that
treated with several chemicals to
prevent the membranes against
scaling and fouling. The
highpressure pump pressurizes the
seawater up to 70 bars and pumps
it through the membranes. The
concentrate will be guided either to
a recovery system or directly to the
drainage piping. The permeate will
be treated by a deacidification filter
to smooth the water.
The disinfection can be realised by
chlorination, UV-beamer or ozone.
Membrane Filtration Technology PID
Seawater desalination is performed by open intake (OFFSHORE) or beach well (ONSHORE) applications.
Each system can be fitted with energy recovery systems like pelton turbines or similar approved recovery units to minimize the energy consumption of the whole installation.
Approx. Values for drinking water:
Without recovery 6 – 8 kWh/m³
With recovery 3 – 5 kWh/m³
Membrane Filtration Technology PID
Standard SEARO-Systems Prepressure pump Coarse filter system Pretreatment station(s) Highpressure pump Membrane unit with high performance RO membranes Pressure relief section Posttreatment unit for permeate control and measurement equipment from world wide distributors PLC System and motor control unit
Membrane Filtration Technology PID
P.O. Box 300 107
D-41342 Korschenbroich Germany
Telefon: +49 (0) 211 – 92964555-7
E-Mail: [email protected]
Web: www.pacific-int.de