Home > Documents > SECAtTtaIchOmeNnt & Partsarchive.constructionequipmentguide.com/web_edit...Blackhawk Mulcher Head...

SECAtTtaIchOmeNnt & Partsarchive.constructionequipmentguide.com/web_edit...Blackhawk Mulcher Head...

Date post: 08-Oct-2020
Category:
Author: others
View: 2 times
Download: 0 times
Share this document with a friend
Embed Size (px)
of 1 /1
Blackhawk Mulcher Head Knifes Through Vegetation Fecon’s Blackhawk knife-tool mulching head quickly and efficiently shreds standing vegetation and processes material on the ground. Designed specifically as a knife tool mulcher, every aspect of the Blackhawk, including rotor diameter and size, ratio of knives to rotor, cutting chamber, even the hydraulic lines, contribute to maximize its production capacity. Ideal for skid steer and compact tracked loaders with hydraulic flows of 27 to 45gpm, this new mulcher fea- tures 30 knife tools and has a 76 in. cutting width. It is an excellent tool for clearing brush and vegetation, shredding material in woodland urban interface zones, clearing rights-of-way, lot clearing and clean-up, site preparation, and more, according to the manufacturer. This optimized rotor can aggressively shred standing vegetation as well as process materials already on the ground. The ability to process already felled materials creates a more aesthetically appealing end-product and eliminates partially processed material being left behind. Because the Blackhawk efficiently chan- nels material through its cutting cycle, there is minimal draw on the engine, resulting in significantly improved fuel efficiency. Should a rotor stall occur, the unit will immediately recover when extricated from the stall-causing material and be ready to re- engage. Most of the finely chipped material is broadcast forward of the rotor to minimize the re-processing of already shredded mate- rial, further enhancing its efficiency and effectiveness, according to the manufacturer. Hydraulic lines have been completely redesigned for better flow through the mulcher. Elimination of 90-degree bends reduces heat buildup in the hydraulic fluid, which allows longer run times and longer service of hydraulic components. Each Blackhawk mulcher can be fine-tuned to the specific hydraulic output of its carrier. Adjusting hydraulic displacement of the motor to match hydraulic flow supplied boosts the rotor performance and efficiency. Bolt-in wear parts enhance the economy of the Blackhawk. Rugged construction includes 5/16 in. thick HS steel cutting chamber with AR steel replaceable wear parts. For more information, call 513/696-4430 or visit www.Fecon.com. Pages 40-43 For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com SECTION Attachment & Parts This optimized rotor can aggressively shred standing vegetation as well as process materials already on the ground. Hydraulic lines have been completely redesigned for better flow through the mulcher. Elimination of 90-degree bends reduces heat buildup in the hydraulic fluid, which allows longer run times and longer service of hydraulic components. Designed specifically as a knife tool mulcher, every aspect of the Blackhawk, including rotor diameter and size, ratio of knives to rotor, cutting chamber, even the hydraulic lines, contribute to maximize its production capacity.
Transcript
  • Blackhawk Mulcher Head Knifes Through Vegetation

    Fecon’s Blackhawk knife-tool mulchinghead quickly and efficiently shreds standingvegetation and processes material on theground.Designed specifically as a knife tool

    mulcher, every aspect of the Blackhawk,including rotor diameter and size, ratio ofknives to rotor, cutting chamber, even thehydraulic lines, contribute to maximize itsproduction capacity. Ideal for skid steer andcompact tracked loaders with hydraulicflows of 27 to 45gpm, this new mulcher fea-tures 30 knife tools and has a 76 in. cuttingwidth. It is an excellent tool for clearingbrush and vegetation, shredding material inwoodland urban interface zones, clearingrights-of-way, lot clearing and clean-up, sitepreparation, and more, according to themanufacturer.This optimized rotor can aggressively

    shred standing vegetation as well as processmaterials already on the ground. The abilityto process already felled materials creates amore aesthetically appealing end-productand eliminates partially processed materialbeing left behind.Because the Blackhawk efficiently chan-

    nels material through its cutting cycle, thereis minimal draw on the engine, resulting insignificantly improved fuel efficiency.Should a rotor stall occur, the unit willimmediately recover when extricated from

    the stall-causing material and be ready to re-engage. Most of the finely chipped materialis broadcast forward of the rotor to minimizethe re-processing of already shredded mate-rial, further enhancing its efficiency andeffectiveness, according to the manufacturer.Hydraulic lines have been completely

    redesigned for better flow through the

    mulcher. Elimination of 90-degree bendsreduces heat buildup in the hydraulic fluid,which allows longer run times and longerservice of hydraulic components. EachBlackhawk mulcher can be fine-tuned to thespecific hydraulic output of its carrier.Adjusting hydraulic displacement of themotor to match hydraulic flow supplied

    boosts the rotor performance and efficiency.Bolt-in wear parts enhance the economy

    of the Blackhawk. Rugged constructionincludes 5/16 in. thick HS steel cuttingchamber with AR steel replaceable wearparts.For more information, call 513/696-4430

    or visit www.Fecon.com.

    Pages 40-43For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

    SECT IONAttachment & Parts

    This optimized rotor can aggressively shred standing vegetation as well as processmaterials already on the ground.

    Hydraulic lines have been completely redesigned for better flow through the mulcher. Elimination of 90-degree bends reducesheat buildup in the hydraulic fluid, which allows longer run times and longer service of hydraulic components.

    Designed specifically as a knife tool mulcher, every aspect of the Blackhawk,including rotor diameter and size, ratio of knives to rotor, cutting chamber, eventhe hydraulic lines, contribute to maximize its production capacity.


Recommended