[ S p e c i a l S e r i e s ]

[ Standard Features ]

• 15-hp Vector Drive • 10,000-rpm Spindle • Standard 40-Taper Tooling • Rapids up to 2,100 ipm • 10-Pocket Automatic Tool Changer • Brushless Servos on All Axes • User-Friendly Haas Control • ISO Standard G-Code Programming • Easy Setup and Operation • Made in the USA

Haas Automation, Inc. | www.HaasCNC.com | 800-331-6746 | Made in U.S.A.

Haas TL-3 Big BoreThe Big-Bore Toolroom Lathe

[ S p e c i a l S e r i e s ]

[ Standard Features ]

• 30 hp Vector Drive Spindle

• Haas-Built 2-Speed Gearbox

• Front & Rear A2-15 Spindle Noses

• Ø8.50" Through-Bore

• Haas Intuitive Programming System

• Built-In Thread Repair Cycles

• 15" Color LCD Monitor w/USB Port

• Integral Chip-Flow Channel

• 1 MB Program Memory

• Manual Handwheels

• Cross Slide, Tool-Post Ready

• Traveling Chip Guard

• Three-Phase Power

The Haas Intuitive Programming System has

built-in thread-repair cycles

Specifications subject to change without notice. Not responsible for typographical errors. Machine shown with optional equipment. Actual product appearance may differ.

Warranty: 1 Year Parts and Labor

[ Options ] p a r t i a l l i s t

• Manual Tailstock w/Adj. Quill

• 25" Manual 3-Jaw Chuck

• 25" Manual 4-Jaw Chuck

• Tool Post/Toolholders

• Remote Jog Handle

• Spindle Orientation

• Coolant Pump Kit

• Rigid Tapping

• User-Definable Macros

650-rpm vector drive Spindle

Traveling chip guardThe optional tailstock, with a manually

adjustable quill, provides additional support for long workpieces

Front and rear A2-15 spindle noses with Ø8.50" through-bore

[ T e c h n i c a l S p e c i f i c a t i o n s ]

[ Specifications ]

Capacities TL-3B

Workholding (opt.) 25"1 Chuck 635 mm1

Between Centers 60" 1524 mm

Max Cutting Dia. 30" 762 mm

Max Cutting Length 60" 1 524 mm

Spindle Max Speed 650 rpmMax Motor Rating 30 hp

22.4 kWMax Torque 1600 ft-lb @ 60 rpm

2 169 Nm @ 60 rpmSpindle Nose 2 x A2-15Spindle Bore Ø8.50"

215.9 mm

Swing Diameter Over Front Apron 30.0"

762 mmOver Cross Slide 18.5"

470 mm

Travels & Feedrates X Axis 16"

406 mmZ Axis 60"

1 524 mmX-Axis Max Thrust 3096 lb

13 772 NZ-Axis Max Thrust 4236 lb

18 843 NX-Axis Rapids 75 ipm

1.9 m/minZ-Axis Rapids 150 ipm

3.8 m/min

General Power 195 - 260 VAC

3-Phase @ 80AMachine Weight 9624 lb

4 365 kg

Haas TL-3 Big BoreThe Big-Bore Toolroom Lathe

[ T e c h n i c a l S p e c i f i c a t i o n s ]

- Operating Dimensions TL-3B

A. Max Operating Height 79" 2 007 mm

B. Max Operating Width 147" 3 734 mm

C. Max Operating Depth† 97" 2 464 mm

† Additional 36" (914 mm) required for opening rear service panel.

Front Top

A

B

C

Specifications subject to change without notice. Not responsible for typographical errors. Actual product appearance may differ. Machines shown with optional equipment. May 2013

C E R T I F I E D

C E R T I F I E D

C E R T I F I E D

The Haas TL-3B Big-Bore Toolroom Lathe combines twin-chuck capability, a large through-bore and the simplicity of a manual lathe with the power and flexibility of the easy-to-use Haas CNC system. With the Haas Intuitive Programming System, operators will transition quickly from manual operation into automatic modes and full CNC. A built-in thread-repair screen easily tackles the types of jobs common in oilfield work.

Intuitive Programming System

Use the top tab menu to select the type of operation

to perform.

1 Choose from the lower tabs to define the specific cutting

operation.

2 Fill in the requested information and press Cycle Start.

3

1Accepts chucks up to 25" (635 mm).