SECOND CALL FOR PAPERS A Joint Conference of: 4 th Asia-Pacific Conference on Manufacturing Systems 3 rd International Manufacturing Engineering Conference December 7 – 8, 2017 Eastparc Hotel, Yogyakarta, INDONESIA Overview The Joint Conference will be hosted by Bandung Institute of Technology (ITB). It will be the 2 nd collaboration with Universiti Malaysia Pahang (UMP) to provide an international assembly for researchers in Industrial and Manufacturing Engineering fields to well as developments in manufacturing technology. Venue The conference will be held in Yogyakarta (often called “Jogja”), the special region located on the central area of Java Island, which is known as one of the center of home and creative industry concentrating in silver and batik fabric. Jogja is also rich of classical Javanese fine art and culture such as batik, drama, music, traditional dance, and puppet shows. Key Conference Dates December 7 th (morning), Registration December 7 – 8, Technical sessions December 7 th (evening), Banquet Organizers Dr. Mohammad Mi`radj Isnaini, ITB (Chair) Professor Abdul Hakim Halim, ITB (Co-Chair) Professor Dradjad Irianto, ITB (Co-Chair) Assoc. Professor Ahmad Razlan Yusoff, UMP (Co-Chair) Dr. Muhammed Nafis Osman Zahid, UMP (Co-Chair) Submission Deadlines June 5 th , 2017 Abstract Submission July 19 th , 2017 Notification of Abstract Acceptance August 14 th , 2017 Full Paper Submission September 11 th , 2017 Notification of Paper Acceptance October 16 th , 2017 Camera-ready paper All papers will go through peer-review process and be published in Scopus-indexed proceeding; IOP Conference Series Material Science and Engineering Price Type : Early-Bird (Until 30 October) Normal Student Package $150 $175 Regular Package $300 $325 Contact: Email: [email protected]Phone: (+62) 22-2506449 More conference information and submission at: https://apcoms.fti.itb.ac.id
Transcript
SECOND CALL FOR PAPERS A Joint Conference of:
4th Asia-Pacific Conference on Manufacturing Systems
3rd International Manufacturing Engineering Conference
December 7 – 8, 2017 Eastparc Hotel, Yogyakarta, INDONESIA
Overview
The Joint Conference will be hosted by Bandung Institute of Technology (ITB). It will be the 2nd
collaboration with Universiti Malaysia Pahang (UMP) to provide an international assembly for
researchers in Industrial and Manufacturing Engineering fields to well as developments in
manufacturing technology.
Venue
The conference will be held in Yogyakarta (often called “Jogja”), the special region located on the
central area of Java Island, which is known as one of the center of home and creative industry
concentrating in silver and batik fabric. Jogja is also rich of classical Javanese fine art and culture
such as batik, drama, music, traditional dance, and puppet shows.
Key Conference Dates
December 7th (morning),
Registration
December 7 – 8, Technical sessions
December 7th (evening), Banquet
Organizers
Dr. Mohammad Mi`radj Isnaini, ITB (Chair)
Professor Abdul Hakim Halim, ITB (Co-Chair)
Professor Dradjad Irianto, ITB (Co-Chair)
Assoc. Professor Ahmad Razlan Yusoff, UMP (Co-Chair)
Dr. Muhammed Nafis Osman Zahid, UMP (Co-Chair)
Submission Deadlines
June 5th, 2017 Abstract Submission
July 19th, 2017 Notification of Abstract Acceptance
August 14th, 2017 Full Paper Submission
September 11th, 2017 Notification of Paper Acceptance
October 16th, 2017 Camera-ready paper
All papers will go through peer-review process and be
published in Scopus-indexed proceeding; IOP
Conference Series Material Science and Engineering
4th Asia-Pacific Conference on Manufacturing Systems
3rd International Manufacturing Engineering Conference
December 7 – 8, 2017 Eastparc Hotel, Yogyakarta, INDONESIA
Topics (not exclusive):
Manufacturing Systems
Product Design and Development (Design for manufacturability and assembly etc.)
Production Planning and Control Systems
Design of Manufacturing Systems (Facilities Planning and Management, Lean Manufacturing etc.)
Quality Engineering and Management
Reliability and Maintenance
Green and Sustainable Manufacturing
Information Systems and Technology
Inventory System
Production Networks
Logistics and Supply Chain Management
Data Mining and Knowledge Management
Technology Management
System Modeling, Optimization & Simulation
Trends in Manufacturing System
Material Manufacturing Processes Manufacturing Automation
Smart Materials
Magnetic Materials
Advanced Materials
Composites
Nano Materials
Non-Ferrous Alloys
Light Metals
Ferrous Materials
Thin Films
Advanced Ceramics
Functionally Graded Materials
Bio Material s
Solidification Processing
Semi-solid Processing
Metal Forming
Polymer Processing
Composites Processing
Powder Metallurgy
Rapid Prototyping
Conventional and Advanced Machining
Tool and Die Design
Welding and Joining
Laser Processing
Surface Modification and Finishing
Semiconductor Processing
CIM/CAD/CAM/CAE/CAPP
Flexible Manufacturing System
Robotics & Robot Application
Industrial & Robotics Vision
Autonomous Mobile Robots
Intelligent Transportation
Factory Communications
Industrial Automation
Microcontrollers/PLC’s
Sensing and Control Systems
Intelligent Sensors and Actuators
Multi-sensor Fusion
Micro/nano Technology
Industrial Antennas and Electromagnetic Devices
MEMS and System Integration
International Scientific Committee
A.K. Prasada Rao / IN I.S. Jawaher / US O. Tokhi / GB A.A. Khan / MY I. Surjandari / ID R.C. Saleh / ID A. Santoso / ID K. Cheng / GB R. Weiss / DE A. S. F. Chiu / PH M.M. Ratna / MY S. Hashimi / IE B.P. Iskandar / ID M. A. B. Mahdi / MY S. Baharin / MY C.H.C. Haron / MY M. Mailah / MY S. Sulaiman / MY C. N. Rosyidi / ID M. Dirhamsyah / MY T.J Ai / ID D.J. Valles-Rosales / US N.D. Sims / GB T.M.A.A Samadhi / ID D.D. Damayanti / ID N.A.N. Mohamed / MY V. Kachitvichyanukul / TH D. Saraswati / ID N.T. Putri / ID W.A.W. Yusoff / MY I.M.D. Tangkas / ID N. Indriati / ID Z. Taha / MY
