Section A Straight Blade Devices · Robertson/slotted head terminal and cord clamp screws. All...

Section AStraight Blade Devices

Index

Rating Type Page NumberFeatures and Benefits Heavy Duty Receptacles A-515A 125V 2P 2W Non-grounding devices A-620A 250V 2P 2W Non-grounding devices A-615 & 20A 125V 2P 3W Heavy Duty duplex receptacles A-7–815 & 20A 125V 2P 3W Hospital Grade duplex receptacles A-915 & 20A 125V 2P 3W Hospital Grade, special purpose duplex receptacles A-1015 & 20A 125V 2P 3W Heavy duty and Hospital Grade single receptacles A-11Features and Benefits Compact Receptacles A-1215 & 20A 125V 2P 3W Compact duplex and single receptacles A-13Features and Benefits 4-PLEX® Receptacles A-1415 & 20A 125V 2P 3W 4-PLEX receptacles and accessories A-1515 & 20A 125V 2P 3W Style Line® duplex receptacles A-1615 & 20A 125V 2P 3W Commercial duplex receptacles A-17–18Features and Benefits INSULGRIP® Plugs and Connectors A-2015 & 20A 125V 2P 3W Insulgrip Heavy Duty plugs A-2115 & 20A 125V 2P 3W Insulgrip Heavy Duty connector bodies A-22Features and Benefits ELASTOGRIP® Plugs and Connectors A-2315 & 20A 125V 2P 3W Elastogrip plugs and connectors A-24Features and Benefits VALISE® Plugs A-2515 & 20A 125V 2P 3W Valise plugs and connectors A-2615 & 20A 125V 2P 3W Flanged inlets and flanged receptacles A-2715 & 20A 125V 2P 3W Miscellaneous and combination receptacles A-2815 & 20A 250V 2P 3W Heavy Duty receptacles A-2915 & 20A 250V 2P 3W Plugs and flanged inlets A-3015 & 20A 250V 2P 3W Connectors and flanged receptacles A-3115A 277V 2P 3W Receptacle, plug and connector A-3230 & 50A 125V 2P 3W single receptacles and plugs A-3330 & 50A 250V 2P 3W single receptacles and plugs A-3330 & 50A 277V 2P 3W single receptacles and plugs A-3320A 125/250V 3P 3W Non-grounding single receptacles and plugs A-3430 & 50A 125/250V 3P 3W Non-grounding single receptacles and plugs A-3520A 125/250V 3P 4W Receptacles and plugs A-36Features and Benefits Heavy Duty INSULGRIP devices A-3730, 50, 60A 125/250V 3Ø 250V 3P 4W Receptacles and plugs A-3820, 30, 50, 60A 3Ø WYE 120/208V 4P 4W Non-grounding receptacles and plugs A-3916A 250V 2P 3W I.E.C. 320 appliance couplers A-4015 & 20A 125V and 250V 2P 3W Acceptor® Hazardous location plugs and receptacles A-4115 & 20A 125V and 250V Single and duplex cover plates A-4215 & 20A Accessories Weatherproof boots and lift covers, PLUGOUT® devices A-4330 & 50A Accessories Cover plates, weatherproof lift covers A-4430, 50, 60A Accessories Cover plates, weatherproof lift covers A-45

Technical information A-46–52

Stra

ight B

lade

Devic

es

Index

Straight Blade Receptacles

One piece brass mounting strap.

Reinforced thermoplastic polyester base.

Patented “bypass” power contacts.

Brass center rivet.

Exclusive external wiring clamps: #8 brass terminal screws.

Impact resistant nylon face.

A-5

Heav

y Duty R

ecepta

cle

sFeatures and

Benefits

Straight Blade ReceptaclesHeavy Duty Duplex and Single ReceptaclesProduct Features and Benefits

One piece mounting strap with integralground contacts. The safest, most reliabledesign for a low resistance flow of faultcurrents. Oversized “bell” shape at thebottom of the ground contacts helpsminimize damage to the grounding systemduring abrupt pullout.

Reinforced thermoplastic base providessuperior thermal, electrical and mechanicalproperties. This high tech material providesimpact resistance and resists heat buildup,giving you long lasting performance.

The patented “bypass” contact designincorporates high-conductivity materialswith superior spring characteristics forincreased contact force and secureconnections. Improved contact performancereduces heat buildup, and ensures areliable, uninterrupted flow of power.

External wiring clamps feature large headbrass screws (#8) for superior torquevalues. Visible brass terminal screws andclamps, with a unique strand containmentfeature, ensure 100% clamping of wirestrands, eliminating heat buildup that canburn out terminals on others’ receptacles.

Quality in DesignThe Hubbell philosophy of design is based on an overriding commitment to performancenot just in the laboratory, but in the real world.No Hubbell device exemplifies this philosophymore than the 5262 duplex receptacle. While all Hubbell receptacles are designed towithstand abusive environments, none canmatch the total performance of the 5262. It is the ultimate receptacle for factories,schools, office buildings, hotels and motels,shopping centers-wherever there are peoplewho take it for granted that a receptacle will be safe and reliable.

Dimensions in Inches (mm)

Straight Blade Devices2 Pole,2Wire Non-Grounding15 and 20 Ampere, 125 and 250 VoltsPlugs, Connector Bodies and Receptacles

Valise® Plugs15A, 125VDescription Cord Dia. Catalog Numbers

Yellow nylon, non-polarized. .218-.385" HBL5865VY –(5.5-9.8)

Yellow nylon, non-polarized. .218-.385" HBL5865VYCN* –(5.5-9.8)

Yellow nylon, polarized. .218-.385" HBL5866VY –(5.5-9.8)

Yellow nylon, polarized. .218-.385" HBL5866VYCN* –(5.5-9.8)

Valise Connector BodiesDescription Cord Dia. Catalog Numbers

Yellow nylon. .218-.385" – HBL5869VY(5.5-9.8)

Yellow nylon. .218-.385" – HBL5869VYCN*(5.5-9.8)

*Note: Catalog numbers listed above with suffix CN have combination Robertson/slotted head terminal and cord clamp screws.All others have slotted screws.

NEMA 1-15R15A 125V

UL CSA

W

NEMA 1-15P15A 125V

UL CSA0.5 HP

W

A-6

20A, 250VDescription Cord Dia. Catalog Numbers

Valise plug, yellow nylon. .220-.660" HBL9758VY –(5.6-16.8)

Receptacle, single, black phenolic. – HBL5552B

Note: Horsepower ratings are AC only and apply to plugs and receptacles only.

NEMA 2-20R20A 250VUL Listed

2 HP

NEMA 2-20P20A 250VUL Listed

2 HP

HBL5869VY

1.25"(31.8)

2.38"(60.5)

.88"(22.4)

HBL9758VY

1.50"(38.1)

1.88"(47.8)

HBL5552B

3.28"(83.3)

1.14"(29.0)

1.39"(35.3)

IP20SUITABILITY

HBL5865VY

1.25"(31.8)

.88"(22.4)

1.68"(42.7)

IP20SUITABILITY


Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsHeavy Duty, Specification Grade, Duplex Receptacles

Heavy Duty, Specification Grade, Duplex ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back and side wired, Brown HBL5262 HBL5362slotted screws. Ivory HBL5262I HBL5362I

Gray HBL5262GY HBL5362GYWhite HBL5262W HBL5362WRed HBL5262R HBL5362RBlack HBL5262BK HBL5362BK

Flush, nylon face, back and side wired, Brown HBL5262CN –Robertson/slotted screws. Ivory HBL5262ICN –

Gray HBL5262GYCN –White HBL5262WCN –Red HBL5262RCN –

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

A-7

Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W H

eavy Duty R

eceptacles

15A only

3.28"(83.3)

.97"(24.6)

1.63"(41.4)

2.72"(69.0)

HBL5362

3.28"(83.3)

.92"(23.3)

1.33"(33.8)

2.72"(69.0)

HBL5392CN

Heavy Duty, Specification Grade, Duplex Receptacles–Robertson /slotted screwsDescription Color Catalog Numbers

Flush, nylon face, Brown HBL5392CNback and side wired. Ivory HBL5392ICN

Isolated ground. Orange IG5392CN

Notes: See Section G for full line of isolated ground devices.Horsepower ratings listed above are AC only.See page A-42 for accessories.See page A-47 for technical information.

G

5-20RCanadian

20A 125VUL CSA

1 HP

WAccepts 20A plug only.

HBL5262

3.28"(83.3)

.97"(24.6)

1.63"(41.4)

2.72"(69.0)


Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsHeavy Duty, Specification Grade, Duplex Receptacles

A-8

3.28"(83.3)

.80"(20.3)

1.33"(33.8)

2.73"(69.3)

IG5262

3.28"(83.3)

1.13"(28.7)

1.81"(46.0)

2.62"(66.5)

GF5262

HBL5262S

3.28"(83.3)

1.30"(33.0)

2.62"(66.5)

1.13"(28.7)

1.75"(44.4)

1.23"(31.2)

3.28"(83.3)

1.13"(28.7)

1.30"(33.0)

1.75"(44.4)

1.23"(31.2)

2.62"(66.5)

IG5262S

Heavy Duty, Specification Grade, Special Purpose Duplex ReceptaclesDescription Color Catalog Numbers

Corrosion resistant. Yellow HBL52CM62 HBL53CM62Ivory HBL52CM62I –Brown HBL52CM62BN –

On 4” (101.6) round cover. Brown HBL5282 –

Isolated ground (1) Orange IG5262 IG5362Orange IG5262CN* –Ivory IG5262I IG5362IGray IG5262GY IG5362GY

Ground fault circuit interrupters (2) Brown GF5262 GF5362Ivory GF5262I GF5362IGray GF5262GY GF5362GYRed GF5262R GF5362RWhite GF5262W GF5362W

Surge suppression receptacles. (3) Blue HBL5262S HBL5362SIvory HBL5262IS HBL5362ISGray HBL5262GYS HBL5362GYSWhite HBL5262WS HBL5362WS

Isolated ground and surge Blue IG5262S IG5362Ssuppression receptacles. (1)(3) Ivory IG5262IS IG5362IS

Gray IG5262GYS IG5362GYSWhite IG5262WS IG5362WSOrange IG5262OS IG5362OS

Notes: (1) See Section G for full line of Circuit Guard® isolated ground devices.(2) See Section G for full line of Circuit Guard ground fault circuit interrupters.(3) See Section G for full line of Circuit Guard surge suppression receptacles.

*Robertson/slotted head terminal and mounting screws. All others have slotted screws.Horsepower ratings listed above are AC only.See page G-55 for accessories.See pages G-25 and G-54 for technical information.

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W15A only

Dimensions in Inches (mm) A-9

Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W H

ospital G

rade R

eceptacles

3.28"(83.3)

.97"(24.6)

1.63"(41.4)

2.72"(69.0)

HBL8200

3.28"(83.3)

.80"(20.3)

1.33"(33.8)

HBL8200ILI

2.73"(69.3)

Heavy Duty, Hospital Grade,Duplex ReceptaclesDescription Color Catalog Numbers

Flush, thermoplastic polyester Brown HBL8200 HBL8300face, back and side wired, Ivory HBL8200I HBL8300Islotted screws. Gray HBL8200GY HBL8300GY

Red HBL8200R HBL8300RWhite HBL8200W HBL8300W

Flush, thermoplastic polyester face, Brown HBL8200CN –back & side wired, with combination Ivory HBL8200ICN –Robertson/slotted head terminal and Gray HBL8200GYCN –mounting screws. Red HBL8200RCN –

White HBL8200WCN –

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W15A only

Heavy Duty, Hospital Grade,Special Purpose Duplex ReceptaclesDescription Color Catalog Numbers

Tamper resistant with wire leads. Brown HBLSG62H HBLSG63HIvory HBLSG62HI HBLSG63HIGray HBLSG62HGY HBLSG63HGYRed HBLSG62HR HBLSG63HRWhite HBLSG62HW HBLSG63HW

Illuminated face, back and side wired, Ivory HBL8200ILI HBL8300ILIslotted screws. Gray HBL8200ILGY HBL8300ILGY

Red HBL8200ILR HBL8300ILRWhite HBL8200ILW HBL8300ILW

Notes: Horsepower ratings are AC only.

3.28"(83.3)

.95"(24.1)

1.59"(40.4)

HBLSG63H

2.72"(69.0)

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsHospital Grade and Special Purpose Hospital Grade Duplex Receptacles

Dimensions in Inches (mm)A-10

3.28"(83.3)

.80"(20.3)

1.33"(33.8)

2.73"(69.3)

IG8200

3.28"(83.3)

1.13"(28.7)

2.62"(66.5)

GF8200

1.30"(33.0)

1.81"(46.0)

Circuit Guard® Heavy Duty, Hospital Grade,Special Purpose Duplex ReceptaclesDescription Color Catalog Numbers

Isolated ground. (1) Orange IG8200 IG8300

Surge suppression receptacles.(2) Blue HBL8262S HBL8362SIvory HBL8262IS HBL8362ISGray HBL8262GYS HBL8362GYSRed HBL8262RS HBL8362RSWhite HBL8262WS HBL8362WS

Isolated ground and surge Blue IG8262S IG8362Ssuppression receptacles.(1) (2) Ivory IG8262IS IG8362IS

Gray IG8262GYS IG8362GYSWhite IG8262WS IG8362WSOrange IG8262OS IG8362OSRed IG8262RS IG8362RS

Ground fault circuit interrupters with Brown GF8200 GF8300wire leads.(3) Ivory GF8200I GF8300I

Gray GF8200GY GF8300GYRed GF8200R GF8300RWhite GF8200W GF8300W

Notes: Horsepower ratings are AC only.(1) See Section G for complete line of Circuit Guard® isolated ground devices.(2) See Section G for complete line of Circuit Guard surge suppression devices.(3) See Section G for complete line of Circuit Guard ground fault circuit

interrupters.GFCI receptacles should not be used in critical care patient areas or forelectrical life support equipment application because of the possibility of power interruption.

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W15A only

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsHospital Grade and Special Purpose Hospital Grade Duplex Receptacles


1.94"(49.3)

.86"(21.8) 1.63"

(41.4)

1.39"(35.3)

HBL5284

1.63"(41.4)

.94" (23.9)

1.94"(49.3)

3.28"(83.3)

HBL8210

1.94"(49.3)

.86"(21.8)

1.63"(41.4)

1.39"(35.3)

HBL8284

1.63"(41.4)

.94" (23.9)

1.94"(49.3)3.28"

(83.3)

HBL6331CN

HBL5261

3.28"(83.3)

#6-32 Tap.94"

(23.9)

1.13"(28.7)

A-11

Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W S

ingle Receptacles

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsHeavy Duty, Specification Grade and Hospital Grade Single Receptacles

Heavy Duty, Specification Grade, Single ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back and side wired. Brown HBL5261 HBL5361Ivory HBL5261I HBL5361IGray – HBL5361GRY

Flush, nylon face, back and side wired. Brown HBL5261CN* –Ivory HBL5261ICN* –

Special Purpose Single ReceptaclesDescription Color Catalog Numbers

Corrosion resistant. Yellow HBL52CM61 HBL53CM61

On a 4" (101.6) round cover. Brown HBL5281 –

Isolated ground. Orange IG5261 IG5361Orange IG5261CN* –

Panel mount on 1.94" (49.3) centers. Brown HBL5284 HBL5357

Heavy Duty, Hospital Grade, Single ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back and side wired.(1) Brown HBL8210HBL8310

Ivory HBL8210I HBL8310IGray HBL8210GY HBL8310GYRed HBL8210R HBL8310RWhite HBL8210W HBL8310W

Isolated ground.(2) Orange IG8210 IG8310

Panel mount on 1.94" (49.3) centers. Brown HBL8284 –Ivory HBL8284I HBL8384I

Notes: *Catalog numbers listed above with suffix CN have combination Robertson/slotted head terminal and mounting screws.All others have slotted screws.

Heavy Duty, Specification Grade, Single Receptacles–Robertson /slotted screwsDescription Color Catalog Numbers

Flush, nylon face, back and side wired. Brown HBL6331CNIvory HBL6331ICN

Heavy duty hospital grade. Brown HBL8310CNIvory HBL8310ICN

Horsepower ratings listed above are AC only.(1)See Section H for complete line of hospital grade devices.(2)See Section G for complete line of Circuit Guard® isolated ground devices.

G

5-20RCanadian

20A 125VUL CSA

1 HP

W

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W15A only

Accepts 20A plug only.

Heavy duty wrap around bridge locked into body.

Thick wall thermoset base.

.032" thick brass triple wipe power contacts.

Eight hole clamp type back wiring.

Brass center rivet.

All brass grounding system.

Impact resistant nylon face.

A-12

Straight Blade ReceptaclesDuplex ReceptaclesProduct Features and Benefits

Value Engineered DesignThe Hubbell 5252 Series. Equal to or better than all competitors’ imitation of Hubbell's 5262.Available in a side wire only version (5242series). Our concern for quality, safety andinnovative design isn’t restricted to the top ofour product line. Every device in our catalog isbuilt to uncompromising standards, no matterwhat the catalog number is. You can benefitfrom the performance features of an industrialreceptacle at a fraction of the price of other5262s.

Pretensioned ground contact feature allowsfor easy insertion and removal of groundblades without sacrificing superior groundblade retention.

Compact heavy duty design provides userswith a superior device which fits into narrow“cut-in” or handy boxes.

Thick triple wipe brass contacts deliverreliable uninterrupted power supply.Material has superior spring properties.Contact assembly includes large #8 brassscrews.

Patented anchor hole and wire restraintfeature. Anchor hole helps form solid wirearound terminal screw. Wire restraint feature provides strain relief when pushingreceptacle into the wall box (5242/5342series).


Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W C

ompact R

eceptaclesStraight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsCompact, Specification Grade Duplex and Single Receptacles

Duplex Receptacles—Side Wired OnlyDescription Color Catalog Numbers

Flush, nylon face, side wired only. Brown HBL5242 HBL5342Ivory HBL5242I HBL5342IGray HBL5242GY HBL5342GYWhite HBL5242W HBL5342W

Single ReceptaclesDescription Color Catalog Numbers

Flush side wired only. Brown HBL5251* –Ivory HBL5251I* –

Isolated ground.(1) Orange IG5251 –

Panel mount 1.75" (44.5) centers. Brown HBL5258 HBL5358Ivory HBL5258I –

Notes: Horsepower ratings listed above are AC only.See page A-42 for accessories.(1)See Section G for complete line of Circuit Guard® isolated ground devices.See page A-48 for technical information.*Add “CN” suffix for Robertson/slotted mounting and terminal screws. All othershave slotted screws.**5-20R Canadian 20A, 125V. UL, CSA.

Duplex Receptacles—Back and Side WiredDescription Color Catalog Numbers

Flush, nylon face, back and side wired. Brown HBL5252 HBL5352Ivory HBL5252I HBL5352IGray HBL5252GY HBL5352GYRed HBL5252R HBL5352RWhite HBL5252W HBL5352WBlue – HBL5352BLBlack – HBL5352BK

Flush, nylon face, back and side wired Brown HBL5252CN HBL5392CN**with combination Robertson/slotted Ivory HBL5252ICN HBL5392ICN**terminal and mounting screws. Gray HBL5252GYCN –

Red HBL5252RCN –White HBL5252WCN –

On a 4.0" (101.6) round cover. Brown HBL5253 –

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

3.28"(83.3)

.80"(20.3)

1.33"(33.8)

2.73"(69.3)

HBL5252

HBL5251

3.28"(83.3)

.92"(23.3)

1.39"(35.3)

HBL5258

1.75"(44.5)

1.47"(37.3)

#8-32 Tap

1.13"(28.7)

15A only

3.28"(83.3)

.80"(20.3)

1.33"(33.8)

2.73"(69.3)

HBL5242

Removable knockouts for mounting to octagon concrete ring or box.

Unique face design accepts up to four straight or molded angle plugs.

Heavy duty Lexan® housing.

Heavy-duty, triple-wipe, brass power and ground contacts.

“A” and “B” circuit identification molded into face.

Snub hole for fast, easy terminations.

Easily accessible break-off tabs for split circuit wiring.

Three conductors energize all four outlets.

Large #8 combination Robertson head terminal screws for ease of wiring.

A-14

Straight Blade Devices4-PLEX® Receptacles

Four-in-One Receptacle4-PLEX is a perfect solution for outlet scarce locations. This receptaclecan be mounted on a single or two gang flush outlet box or on a non-metallic portable box for temporary power applications. If mounted on a 4”square box, this product complies with NEC® Article 410-56(i). Availablein industrial grade, hospital grade, isolated ground and surge protectedversions. Accessories include mounting plates and portable outlet boxes.

Lexan® is a registered trademark of General Electric Co.


Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W 4-P

LE

X®

Receptacles

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 Volts4-PLEX® Receptacles

4-PLEX Receptacles with over size Robertson /slotted head terminal screwsDescription Color Catalog Numbers

Specification grade. Brown HBL415 HBL420Ivory HBL415I HBL420IGray HBL415GY HBL420GYWhite HBL415W HBL420WBlack HBL415BK HBL420BK

Hospital grade. Brown HBL415H HBL420HIvory HBL415HI HBL420HIGray HBL415HGY HBL420HGYWhite HBL415HW HBL420HWRed HBL415HR HBL420HR

Isolated ground Orange IG415 IG420

Surge suppression. Blue HBL415S HBL420SIvory HBL415IS HBL420IS

Surge suppression, hospital grade. Blue – HBL420HSIvory – HBL420HIS

Description Color Catalog Number

Specification grade. White 415347WC

Notes: Horsepower ratings are AC only.See page A-49 for technical information.

G

W

NEMA 24-15R15A 347V

CSA

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

AccessoriesDescription Color Catalog Numbers

4-PLEX adapter plates Brown HBL4APfor 1 and 2 gang, and 4" (101.6) square Ivory HBL4APIdevice boxes. Gray HBL4APGY

White HBL4APWBlack HBL4APBKBlue HBL4APBLRed HBL4APROrange HBL4APO

4-PLEX portable box. Brown HBL4PBPortable 4" (101.6) square box with Ivory HBL4PBIcord grip. Accepts up to .66" (16.8) Black HBL4PBBKdiameter cord. Blue HBL4PBBL

Notes: 4-PLEX box is not UL listed. UL listing does not apply when 4-PLEX receptacleis used with 4-PLEX box in extension cord application.

15A only

4.30" sq.(109.2)

3.02" (76.7)3.38" (85.9)

.92"(23.4)

.1"(2.5)

HBL415I

HBL415HI

4.30" sq.(109.2)

3.02" (76.7)3.38" (85.9)

.92"(23.4)

.1"(2.5)

4.30" sq.(109.2)

3.02" (76.7)3.38" (85.9)

.92"(23.4)

.1"(2.5)

HBL415S

4.78"(121.4)

1.75"(44.5 )

3.38"sq.(85.9)

.38" (9.7)

.19" (4.8)

HBL4API

3.28"(83.3)

2.75"(69.9)

4.30" sq.(109.2)

3.28" (83.3)

2 Punchouts

3.38" sq. (85.9) .84"(21.3)

HBL4PBI

4.05" sq.(102.9)

.66" (16.8)Dia. Wire Hole


Style Line, Specification Grade, Duplex ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back and side wired. Brown HBL2152 HBL2162Ivory HBL2152I HBL2162IGray HBL2152GY HBL2162GYWhite HBL2152WA HBL2162WABlack HBL2152BLK HBL2162BLKOffice White HBL2152OW HBL2162OW

Isolated ground.(1) Orange IG2152 IG2162

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W15A only

Style Line, Hospital Grade, Duplex Receptacles (2)

Description Color Catalog Numbers

Flush, nylon face, back and side wired. Brown HBL2172 HBL2182Ivory HBL2172I HBL2182IGray HBL2172GY HBL2182GYWhite HBL2172WA HBL2182WABlack HBL2172BLK HBL2182BLKOffice White HBL2172OW HBL2182OWRed HBL2172R HBL2182R

Isolated ground.(1) Orange IG2172 IG2182Ivory IG2172I IG2182IWhite – IG2182WA

Notes: (1)See Section G for complete line of Circuit Guard® isolated ground devices.(2)See Section H for complete line of hospital grade devices.See Section D for wallplates.Horsepower ratings listed above are AC only.

3.28"(83.3)

1.36"(34.5)

HBL2152

.80"(20.3)

2.75"(69.9)

3.28"(83.3)

.80"(20.3)

2.75"(69.9)

1.36"(34.5)

HBL2172

3.28"(83.3)

.80"(20.3)

2.75"(69.9)

1.36"(34.5)

IG2162

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsSTYLE LINE® Duplex Receptacles

Catalog number shown on graybackground will be discontinuedwhen stock is exhausted.


Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W C

omm

ercial Receptacles

Commercial Duplex ReceptaclesBack and Side WiredDescription Color Catalog Numbers

Smooth nylon face. Brown CBR15* CBR20Ivory CBR15I* CBR20IGray CBR15GRY* CBR20GRYWhite CBR15WHI* CBR20WHIBlack CBR15BLK CBR20BLK

Commercial Duplex ReceptaclesSide Wired OnlyDescription Color Catalog Numbers

Smooth nylon face. Brown CR15* CR20Ivory CR15I* CR20IGray CR15GRY* CR20GRYWhite CR15WHI* CR20WHIBlack CR15BLK CR20BLK

Commercial Duplex ReceptaclesSide Wired, Open Terminals Description Color Catalog Numbers

Smooth nylon face. Brown CRO15 CRO20Ivory CRO15I CRO20IGray CRO15GRY CRO20GRYWhite CRO15WHI CRO20WHIBlack CRO15BLK CRO20BLK

Notes: See page A-42 for accessories. Horsepower ratings listed above are AC only.*Add “CN” suffix for Robertson /slotted mounting and terminal screws. All othershave slotted screws.

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

15A only

3.28"(83.3)

.83"(21.1)

1.41"(35.8)

CBR15

2.73"(69.3)

3.28"(83.3)

.83"(21.1)

1.41"(35.8)

CR15

2.73"(69.3)

3.28"(83.3)

.83"(21.1)

1.41"(35.8)

CRO15

2.73"(69.3)

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsSpecification Grade, Commercial Duplex Receptacles

Catalog numbers shown on graybackground will be discontinuedwhen stock is exhausted.


Commercial Duplex ReceptaclesBack and Side WiredDescription Color Catalog Numbers

Finder groove nylon face. Brown CBRF15* CBRF20Ivory CBRF15I* CBRF20IGray CBRF15GRY* CBRF20GRYWhite CBRF15WHI* CBRF20WHIBlack CBRF15BLK CBRF20BLK

Commercial Duplex ReceptaclesSide Wired OnlyDescription Color Catalog Numbers

Finder groove nylon face. Brown CRF15* CRF20Ivory CRF15I* CRF20IGray CRF15GRY* CRF20GRYWhite CRF15WHI* CRF20WHIBlack CRF15BLK CRF20BLK

Notes: See page A-42 for accessories.Horsepower ratings listed above are AC only.*Add “CN” suffix for Robertson/slotted mounting and terminal screws. All othershave slotted screws.

G


1 HP

W

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

15A only

3.28"(83.3)

.83"(21.1)

1.41"(35.8)

CBRF15

2.73"(69.3)

3.28"(83.3)

.83"(21.1)

1.41"(35.8)

CRF15

2.73"(69.3)

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsSpecification Grade, Commercial Duplex Receptacles

Catalog numbers shown on gray background and CRF15GRYCN and CRF15ICN will bediscontinued when stock is exhausted.

INSULGRIP® Plugs and ConnectorsIN

SU

LGR

IP®P

lugs a

nd

Connecto

rs

Individually molded face for each blade configuration keeps debris out of plug interior.

Roomy wiring chamber provides ample space for wiring.

Individual wiring terminals completely enclosed in their own separate chambers.

Powerful, offsetting cord grips clamp on individual conductors and outer cordjacket to prevent strain on terminals.

Ribbed nylon housing is impact and chemical resistant.

Bevelled housing prevents snaggingwhen dragged across uneven surfaces.

A-20

Straight Blade DevicesINSULGRIP® 15&20Ampere Plugs and Connectors Featuring Integral VARI-SIZE™ Cord Grip

*Combination Robertson/slotted screwsavailable on certain configurations and areindicated with “CN” suffixes in the catalog.

Catalog number is visible on the devicewhile in use for easy identification.

Combination Phillips/slotted*head screws provide screwdriverversatility. Pocketed recess for

cord grip screws deter slippage of thescrewdriver.

Integral VARI-SIZE insert adjusts to awide range of cord sizes: .230-.720” (5.8-18.3).

VARI-SIZE pointer set to “smaller thangauge” position. Cord diameter range is.230”-.360” (5.8-9.0). Accepts slottedand Phillips head drivers.

Transparent angled wiring entranceholes permit “straight in” conductorinsertion.

Powerful offsetting cord grips clamp onindividual conductors and outer cordjacket to prevent strain on terminations.


Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W P

lugs Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsINSULGRIP® Heavy Duty Plugs

Insulgrip Plugs–Phillips/Slotted ScrewsDescription Cord Dia. Catalog NumbersBlack and white nylon. .230-.720" HBL5266C™ HBL5366C™

(5.8-18.3)

Corrosion resistant yellow nylon. .230-.720" HBL52CM66C HBL53CM66C(5.8-18.3)

8-position angle plug, black .325-.655" HBL5266CA HBL5366CAand white nylon. (8.3-16.6)

8-position angle plug, .325-.655" HBL5266CAT –transparent enclosure. (8.3-16.6)

Anchor lock, black and .230-.720" HBL5280C –white nylon. (5.8-18.3)

Anchor lock, corrosion resistant .230-.720" HBL52CM80C –yellow nylon. (5.8-18.3)

Finger grip, black neoprene, .312-.468" HBL5921 –slotted screws. (7.9-11.9)

Fusible, black vinyl housing, .296-.625” HBL5299 –slotted screws. (7.5-15.9)

Insulgrip Plugs – Robertson /Slotted Screws Description Cord Dia. Catalog NumbersBlack and white nylon. .230-.720" HBL5266CCN™ HBL5366CCN™

(5.8-18.3)

Yellow and white nylon. .230-.720" HBL5266CYCN –(5.8-18.3)

8-position angle plug, .325-.655" HBL5266CACN –black and white nylon. (8.3-16.6)

8-position angle plug, .325-.655" HBL5266CATCN –transparent enclosure. (8.3-16.6)

Insulgrip, Hospital Grade Plugs–Phillips/Slotted ScrewsDescription Cord Dia. Catalog NumbersBlack and white nylon. .230-.720" HBL8215C™ HBL8315C

(5.8-18.3)

Transparent housing. .230-.720" HBL8215CT HBL8315CT(5.8-18.3)

8-position angle plug, .250-.655" HBL8215CAT HBL8315CAT transparent enclosure. (6.4-16.6)

Insulgrip, Hospital Grade Plugs–Robertson /Slotted ScrewsDescription Cord Dia. Catalog NumbersBlack and white nylon. .230-.720" HBL8215CCN™ –

(5.8-18.3)

Transparent housing. .230-.720" HBL8215CTCN –(5.8-18.3)

8-position angle plug, .250-.655" HBL8215CATCN –transparent enclosure. (6.4-16.6)

Notes: Horsepower ratings listed above are AC only. * UL component listed only.

AccessoriesSeal-Tite® triple seal black elastomer cover for Insulgrip plugs when HBL6017*used in a cord set, and connectors when used with flanged inlets.

Same as above except yellow elastomer. HBL60CM17*

PLUGOUT ® Lockout device for Hubbell plugs and others. HLD

Notes: See page A-43 for accessories. See page A-46 for technical information.

G

NEMA 5-20P20A 125V

UL CSA1 HP

W

G

NEMA 5-15P15A 125V

UL CSA0.5 HP

W

HBL5266C

1.53"(38.9)

1.97"(50.0)

HBL5266CA

2.11"(53.6)

1.22"(30.9)

1.53"(38.9)

HBL5280C

1.53"(38.9)

1.97"(50.0)

HBL8215C

1.53"(38.9)

1.97"(50.0)

HBL8215CAT

2.11"(53.6)

1.53"(38.9)

1.22"(30.9)

IP20SUITABILITY

Discontinued when

stock is exhausted


Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsINSULGRIP® Connector Bodies

Insulgrip Connector Bodies–Phillips/Slotted ScrewsDescription Cord Dia. Catalog Numbers

Black and white nylon. .230-.720" HBL5269C™ HBL5369C™(5.8-18.3)

Black and white nylon. .230-.720" HBL5269CCN™* –(5.8-18.3)

Corrosion resistant yellow nylon. .230-.720" 52CM69C 53CM69C(5.8-18.3)

Steel armored, brown phenolic, .296-.625" 5269 –slotted screws. (7.5-15.9)

Insulgrip Hospital Grade, Connector Bodies–Phillips/Slotted ScrewsDescription Cord Dia. Catalog Numbers

Black and white nylon. .230-.720" HBL8219C™ HBL8319C(5.8-18.3)

Black and white nylon. .230-.720" HBL8219CCN™* –(5.8-18.3)

Transparent enclosure. .230-.720" HBL8219CT HBL8319CT(5.8-18.3)

Transparent enclosure. .230-.720" HBL8219CTCN* –(5.8-18.3)

*Note:Catalog numbers listed above with suffix CN have combination Robertson/slotted head terminal and assembly screws.


G

W

NEMA 5-15R15A 125V

UL CSA

G

W

Insulgrip Connector Bodies–Robertson/Slotted ScrewsDescription Cord Dia. Catalog Numbers

Heavy duty, .230-.720" HBL6334CCN™black and white nylon. (5.8-18.3)

Hospital grade, .230-.720" HBL8319CCNblack and white nylon. (5.8-18.3)

Notes: Connector bodies are not HP rated. See Section H for complete line of hospital grade devices.See page A-46 for technical information.See accessories at back of this section.

AccessoriesSeal-Tite® triple seal black elastomer cover for Insulgrip connector HBL6018*bodies when used in a cord set.

Same as above except yellow elastomer. HBL60CM18*

Closure plug, black. HBL6019

Closure plug, yellow. HBL60CM19

PLUGOUT ® Lockout device for Hubbell connectors and others HLD

Notes: *IP55 suitability if closure plug inserted or when installed and used properly with HBL6017 or HBL60CM17.

G

5-20RCanadian

20A 125VUL CSA

W

HBL5269C

1.53"(38.9)

2.78"(70.6)

1.40"(35.6)

HBL8219C

1.53"(38.9)

2.78"(70.6)

1.40"(35.6)

HBL6334CCN

1.53"(38.9)

2.78"(70.6)

1.40"(35.6)

15A onlyIP20

SUITABILITY

Accepts 20A plug only.IP20

SUITABILITY

“U-Drive” fast lead body assembly screws.

Neoprene bushing keeps water and dust out.

Color coded Kellems GOTCHA® rings provide increased cord retention.

Thermoplastic elastomer housing. Resists weathering caused by ultraviolet rays and ozone better than rubber. Also oil and chemical resistant.

Three separate transparent wiring chambers allow for visual inspection.

Integral weatherproofing shroud seals connection between plug and connector.

Closure plug seals connector body when disconnected from plug.

Pretensioned “bypass” design female contacts for abuse resistance and reliability.

Nylon compression nut keeps water and dust from getting into the body around the cord.

Thermoplastic elastomer housing.

Powerful nylon cord grip prevents strain on terminals.

Dust and moisture seal keeps out liquids, metal filings and other foreign materials.

“U Drive” fast lead body assembly screws.

Watertight Plug

Watertight Connector Body

Dust Tight Plug

A-23

EL

AS

TO

GR

IP®

Plu

gs a

nd

Connecto

rsFeatures and

Benefits

Straight Blade DevicesELASTOGRIP® High Visibility Yellow Plugs and ConnectorsProduct Features and Benefits


Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsELASTOGRIP® Plugs and Connector Bodies

Elastogrip Connector BodiesDescription Cord Dia. Catalog Numbers

Yellow elastomer, .300-.655" HBL1547 HBL1533dust tight. (7.6-16.6)

Yellow elastomer, .300-.655" HBL15W47* HBL15W33*watertight. (7.6-16.6)

Notes: Connector bodies are not HP rated.*Watertight connectors IP55 suitability when closure plug inserted or wheninstalled and used properly with watertight plug.


G

W

NEMA 5-15R15A 125V

UL CSA

G

W

Elastogrip PlugsDescription Cord Dia. Catalog Numbers

Yellow elastomer, .300-.655" HBL1447 HBL1433dust tight (7.6-16.6)

Yellow elastomer, .300-.655" HBL14W47* HBL14W33*watertight. (7.6-16.6)

Note: Horsepower ratings listed are AC only.*Watertight plugs IP55 suitability when installed and used properly with watertightconnector bodies.

G

NEMA 5-20P20A 125V

UL CSA1 HP

W

G

NEMA 5-15P15A 125V

UL CSA0.5 HP

W15A only

HBL1447

2.19"(55.6)

1.56"(39.6)

HBL14W47

2.63"(66.8)

1.56"(39.6)

HBL1547

3.00"(76.2)

1.61"(40.9)

HBL15W47

4.00"(101.6)

1.61"(40.9)

IP20 and IP55SUITABILITY

Powerful cord grips prevent conductor slippage and strain on wiring terminals.

Removable cord inserts. Device accommodates a wide range of cord sizes – .220-.660" (5.6-16.8).

Unique patented clamp type terminals provide a superior electrical connection by “bundling” the conductor strands when clamps are tightened.

Nylon webs are provided to make wiring quick and easyby joining the three sections together during assembly.

Two captive assembly screws.

Totally insulated impact and crush resistant nylon body.

8 specially designed load bearing locking lugs insure a positive fit as the blade holder and sides are closed.

A-25

VA

LIS

E®

Plu

gs a

nd

Connecto

rsFeatures and

Benefits

Straight Blade DevicesVALISE® Plugs and Connectors



Valise PlugsDescription Cord Dia. Catalog Numbers

Yellow nylon. .220-.660" HBL5965VY® HBL5364VY(5.6-16.8)

Yellow nylon. .220-.660" HBL5965VYCN* HBL5364VYCN*(5.6-16.8)

Gray nylon. .220-.660" HBL5965VGY –(5.6-16.8)

Black nylon. .220-.660" HBL5965VBLK –(5.6-16.8)

Black nylon. .220-.660" HBL5965VBLKCN* –(5.6-16.8)

Insulation displacement .230-.360" HBL5966VBLK –terminals, black nylon. (5.8-9.1)

Hospital Grade, Valise PlugsDescription Cord Dia. Catalog Numbers

White nylon. .300-.660" HBL8115V HBL8364V(7.6-16.8)

White nylon. .300-.660" HBL8115VCN* –(7.6-16.8)

Insulation displacement, .230-.360" HBL8013V –white nylon. (5.8-9.1)

Note: See Section H for complete line of hospital devices.

G

NEMA 5-20P20A 125V

UL CSA1 HP

W

G

NEMA 5-15P15A 125V

UL CSA0.5 HP

W

Valise Connector BodiesDescription Cord Dia. Catalog Numbers

Yellow nylon .220-.660" HBL5969VY™ HBL5369VY(5.6-16.8)

Yellow nylon .220-.660" HBL5969VYCN* –(5.6-16.8)

Gray nylon .220-.660" HBL5969VGY –(5.6-16.8)

Black nylon .220-.660" HBL5969VBLK –(5.6-16.8)

Black nylon .220-.660" HBL5969VBLKCN* –(5.6-16.8)

Valise, Hospital Grade, Connector BodyDescription Cord Dia. Catalog Numbers

White nylon .300-.660" HBL8119V –(7.6-18.3)

Notes: *Catalog numbers listed above with suffix CN have combination Robertson/slotted head terminal and assembly screws. All others haveslotted screws.Connector bodies are not HP rated.


G

W

NEMA 5-15R15A 125V

UL CSA

G

W

A-26

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsVALISE® Plugs and Connector Bodies

15A only

HBL5965VY

1.88"(47.8)

1.25"(31.8)

1.13"(28.7)

HBL8115V

1.88"(47.8)

1.25"(31.8)

1.13"(28.7)

HBL5969VY

2.63"(66.8)

1.25"(31.8)

1.13"(28.7)

HBL8119V

2.63"(66.8)

1.25"(31.8)

1.13"(28.7)

IP20SUITABILITY

IP20SUITABILITY

HBL5966VBLK

1.17"(29.7)

1.60"(40.6)

1.24"(31.5)


Stra

ight B

lade

Devic

es

15A &

20A, 125V, 2P

3W F

langed

Devices

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 125 VoltsINSULGRIP® Flanged Inlets and Flanged Receptacles

Flanged Inlets–Phillips/Slotted ScrewsDescription Catalog Numbers

Nylon casing, back wired. HBL5278C HBL5378C

Same as above, except with combination HBL5278CCN –Robertson/slotted head screws.

Weather proof, gray nylon, with lift cover and boot, HBL61CM64 –slotted screws.

Nickel plated brass flange, phenolic body, miniature HBL5240* –style, for molded on connectors only, slotted screws.

* Specially designed to accept “molded-on” connector bodies. Cat. 5240 will not acceptstandard size connector bodies listed in this catalog, or molded connectors having a“rejection obstruction” as required by Underwriters Laboratories Inc. standard #817cord sets and power supply cords” effective 7/1/81.

NEMA 5-20P20A 125V

UL CSA

G

W

NEMA 5-15P15A 125V

UL CSA

G

W

Flanged Receptacles–Phillips/Slotted ScrewsDescription Catalog Numbers

Nylon casing, back wired. HBL5279C HBL5379C

Nickel plated brass flange, phenolic body, HBL5279 –covered terminals, slotted screws.

Nickel plated brass flange, brown phenolic, HBL5256 –slotted screws. (Mounting screws packed separately.)

Weather proof, gray nylon, with lift cover and boot, – HBL61CM65slotted screws.

See page A-43 for accessories.


G

W

NEMA 5-15R15A 125V

UL CSA

G

W15A only

HBL5278C

1.72"(43.7)

.16" (4.1)Dia.

2.56"(65.0)

2.19"(55.6)

1.72"(43.7)

HBL61CM64

2.88"(73.2)

1.88"(47.8)

.19" (4.8) Dia.4 Holes

2.72"(69.1)

.39"(9.9)Dia.

1.56"(39.6)

2.72"(69.1)

HBL5279C

1.72"(43.7)

.16" (4.1)Dia.

2.56"(65.0)

2.19"(55.6)

1.72"(43.7)

HBL5256

2.06"(52.3)

1.47"(37.3)

1.09"(27.7)

.20" Dia.(5.1)

HBL61CM65

2.88"(73.2)

1.88"(47.8)

2.25"(57.2)

1.56"(39.6)

2.66"(67.6)

.19" (4.8) Dia.4 Holes

.39"(9.9)Dia.

Discontinued when

stock is exhausted


Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere Miscellaneous and Combination Receptacles

Miscellaneous ReceptaclesDescription Catalog Numbers

Receptacle, Display Type, BrownPhenolic, with .060 brass plate HBL5236 and blank flush plug.

Receptacle, Clock HangerBrown with .040 brass plate. HBL5233 Brown with stainless steel plate. HBL5235

Four Outlet Cluster, BrownPhenolic, steel cover, swivel hook. HBL9259* Cord grip range .296-.562" (7.5-14.3) (cord not supplied).

*Not listed by Underwriters Laboratories Inc.

Special Combination Duplex ReceptaclesDescription Catalog Numbers

15A 125V Brown phenolic, 1 feed, 1 return, back/side wired. HBL4792

Brown phenolic, 2 feeds, 1 return, side wired. HBL4794

15A 125V Brown phenolic, 2 feeds, 2 returns, side wired. HBL4795

15A 250V Brown nylon face, 2 circuit, back and side wired. HBL5292

Same as above except ivory. HBL5292I

15A 125V

20A 250V Brown nylon face, 2 circuit, back and side wired. HBL5492

Same as above except ivory. HBL5492I

20A 125V

15A 125V Brown phenolic, 2 feeds, 1 return, common ground. HBL7371

Brown phenolic, 2 feeds, 2 returns, common ground. HBL 737210A 250V15A 125V Note: These devices not listed by Underwriters Lab.

20A 125V Brown phenolic, side and backwired. HBL5392

20A 125V Orange urea, isolated ground. IG5392CN*Note: These devices will only accept 20A

grounding plugs, UL and C.S.A. listed.

*Robertson/slotted mounting and terminal screws. All others have slotted screws.Note: See Section G for complete line of Circuit Guard® isolated ground devices.

G

NEMA 5-15R15A 125V

UL CSA0.5 HP

W

HBL5236

HBL5233

HBL9259

2.00"(50.8)

3.69"(93.7)

3.00"(76.2)

3.28"(83.3)

.88"(22.4)

1.50"(38.1)

2.75"(69.9)

HBL5292


Stra

ight B

lade

Devic

es

15A &

20A, 250V, 2P

3W H

eavy Duty R

eceptacles

Heavy Duty, Specification Grade, Duplex ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back & side wired. Brown HBL5662 HBL5462Ivory HBL5662I HBL5462IGray – HBL5462GY

Flush, nylon face, back & side wired, Brown HBL5662CN HBL6392CN*Robertson/slotted screws. Ivory HBL5662ICN –

Isolated Ground. Orange IG5662 IG5462

*Cat. No. 6392CN is UL/CSA listed and has a 20A 250V configuration only.

Heavy Duty, Hospital Grade, Duplex ReceptaclesDescription Color Catalog Numbers

Flush, thermoplastic polyester face. Brown HBL8600 HBL8400Ivory HBL8600I HBL8400I

Heavy Duty, Specification Grade, Single ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, back & side wired. Brown HBL5661* HBL5461Ivory HBL5661I* HBL5461I

Isolated Ground. Orange IG5661 IG5461

Panel mount 1.94" (49.3) centers. Brown HBL5684 –

Flush, nylon face, back & side wired, Brown – HBL6391CN**Robertson/slotted screws. Ivory – HBL6391ICN**

*Add “CN” suffix for Robertson/slotted mounting and terminal screws. All others have slotted screws.**Products are UL/CSA listed and have 20A, 250V configuration only.

Compact, Specification Grade, Duplex and Panel Mount Single ReceptaclesDescription Color Catalog Numbers

Flush, nylon face, side wired only, Brown HBL5652 –Ivory HBL5652I –

Panel mount 1.75" (44.5) centers. Brown HBL5658 –

Notes: HP ratings are AC only.See page A-42 for accessories.See Section G for full line of Circuit Guard® isolated ground devices.

G

NEMA 6-20R20A 250V

UL2 HP

G

NEMA 6-15R15A 250V

UL CSA1.5 HP

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 250 VoltsHeavy Duty, Specification Grade Receptacles

15A only

3.28"(83.3)

.97"(24.6)

1.63"(41.4)

2.72"(69.1)

HBL5662

3.28"(83.3)

.97"(24.6)

1.63"(41.4)

2.72"(69.1)

HBL5462

HBL5661

1.94"(49.3)

1.19"(30.2)

1.63"(41.4)

HBL5684

1.94"(49.3)

.875"(22.2)

1.63"(41.4)

HBL5658

1.75"(44.5)

1.47"(35.3)

#8-32 Tap

1.13"(28.7)


15 and 20A Plugs–Phillips/Slotted ScrewsDescription Cord Dia. Catalog Numbers

Insulgrip® plug, black and .230-.720" HBL5666C HBL5466Cwhite nylon. (5.8-18.3)

Insulgrip plug, black and white .230-.720" HBL5666CCN HBL5466CCNnylon, Robertson/slotted screws. (5.8-18.3)

Insulgrip plug, corrosion resistant, .230-.720" HBL56CM66C HBL54CM66Cyellow nylon. (5.8-18.3)

8-Position Insulgrip angle plug, .325-.655" HBL5666CA HBL5466CAblack and white nylon. (8.3-16.6)

Valise® plug, yellow nylon, .220-.660" HBL5666VY HBL5464VYslotted screws. (5.6-16.8)

Valise plug, yellow nylon, .220-.660" HBL5666VYCN HBL5464VYCNRobertson/slotted screws. (5.6-16.8)

G

NEMA 6-20P20A 250V

UL CSA2 HP

G

NEMA 6-15P15A 250V

UL CSA1.5 HP

Insulgrip Flanged Inlets–Phillips/Slotted ScrewsDescription Catalog Numbers

Nylon casing. HBL5678C HBL5478C

Note: Flanged inlets are not HP rated.See page A-43 for accessories.

Valise, Hospital Grade PlugsDescription Cord Dia. Catalog Numbers

Valise plug, white nylon, .300-.660" HBL8666V HBL8464Vslotted screws. (7.6-16.8)

Note: HP rating listed above are based on 208 to 240V AC only.

A-30

Straight Blade Devices2 Pole,3Wire Grounding15 and 20 Ampere, 250 VoltsPlugs and Flanged Inlets

HBL5666C

1.97"(50.0)

1.53"(38.9)

HBL5666CA

2.11"(53.6)

1.53"(38.9)

1.22"(30.9)

HBL5666VY

1.5"(38.1)

1.88"(47.8)

1.13"(28.7)

HBL5678C

1.72"(43.7)

.16" (4.1)Dia.

2.56"(65.0)

2.19"(55.6)

1.72"(43.7)

IP20SUITABILITY


Stra

ight B

lade

Devic

es

15A &

20A, 250V, 2P

3W Fem

ale Devices

Straight Blade Devices2Pole,3Wire Grounding15 and 20 Ampere, 250 VoltsConnectors and Flanged Receptacles

Connector BodiesDescription Cord Dia. Catalog Numbers

Insulgrip® connector, .230-.720" HBL5669CHBL5469Cblack and white nylon, (5.8-18.3)Phillips/slotted screws.

Valise® connector, yellow nylon, .220-.660" HBL5669VY HBL5469VYslotted screws. (5.6-16.8)

G


G

NEMA 6-15R15A 250V

UL CSA

Flanged ReceptaclesDescription Catalog Numbers

Nylon casing, HBL5679C HBL5479CPhillips/slotted screws.

Nickel plated brass flange, brown phenolic HBL5656housing, slotted screws. (Mounting screws packed separately.)

G


G

NEMA 6-15R15A 250V

UL CSA

Connector Bodies with Robertson/Slotted ScrewsDescription Cord Dia. Catalog Numbers

Insulgrip connector, black and .230-.720" HBL5669CCN HBL6394CCNwhite nylon. (5.8-18.3)

Valise connector, yellow nylon .220-.660" HBL5669VYCN(5.6-16.8)

Note: See page A-43 for accessories.

G

NEMA 6-20RCanadian

20A 250VUL CSA

G

NEMA 6-15R15A 250V

UL CSA

HBL5669C

2.78"(70.6)

1.53"(38.9)

1.41"(35.8)

HBL5669VY

1.25"(31.8)

2.38"(60.5)

.88"(22.4)

HBL5679C

1.72"(43.7)

.16" (4.1)Dia.

2.56"(65.0)

2.19"(55.63)

1.72"(43.7)

HBL5656

2.06"(52.3)

1.47"(37.3)

1.09"(27.7)

.20" Dia.(5.1)

HBL6394CCN

2.78"(70.6)

1.53"(38.9)

1.41"(35.8)

NEMA 6-20R Canadianaccepts 20A plug only.

15A only

15A onlyIP20

SUITABILITY

IP20SUITABILITY


Duplex ReceptacleDescription Catalog Numbers

Flush, brown, back & side wired. HBL5302 –

Notes: Horsepower ratings are AC only.

Connector BodyDescription Cord Dia. Catalog Numbers

Steel armored, brown. .296-.625" 5324* –(7.5-15.9)

Notes: *Catalog number 5324 is not horsepower rated.Horsepower ratings are AC only.

PlugDescription Cord Dia. Catalog Numbers

Finger grip, .312-.468" – HBL5929black elastomer. (7.9-11.9)

Note: Horsepower ratings are AC only.

G

NEMA 7-15P15A 277V AC

UL CSA2HP

W

G

NEMA 7-15R15A 277V AC

UL CSA2HP

W

A-32

Straight Blade Devices2 Pole,3Wire 15 Ampere, 277V ACReceptacle, Connector Body and Plug

3.28"(83.3)

1.19"(30.2)

1.33"(33.8)

HBL5302

2.63"(66.8)

1.58"(40.1)

1.44"(36.6)

1.53"(38.9)

5324

1.50"(38.1)

1.63"(41.4)

HBL5929

Discontinued when stock is exhausted


Stra

ight B

lade

Devic

es

30A &

50A, 2P

3W

2Pole,3Wire Grounding Receptacles and PlugsRating Configuration Description Cord Dia. Catalog No.

30A 125V Receptacle, HBL9308black phenolic.

30A 125V Receptacle, IG9308 orange, isolated ground.

30A 125V Plug, nylon, angle .625-1.187"HBL93094 position. (15.9-30.2)

30A 125V Plug, nylon, angle .625-1.187"HBL9309CN*4 position. (15.9-30.2)


30A 250V Receptacle, IG9330 Orange, isolated ground.

30A 250V Plug, nylon, .625-1.187"HBL9331angle 4 position. (15.9-30.2)

30A 250V Receptacle, HBL9330CN*black phenolic.

30A 250V Plug, nylon, .625-1.187"HBL9331CN*angle 4 position. (15.9-30.2)

30A 277VAC Receptacle, HBL9315black phenolic

30A 277VAC Plug, nylon, .625-1.187"HBL9319angle 4 position. (15.9-30.2)







50A 250V Receptacle, HBL9367CN*black phenolic.

50A 250V Plug, nylon, .625-1.187"HBL9368CN*angle 4 position. (15.9-30.2)

50A 277V AC Receptacle, HBL9365black phenolic.

50A 277V AC Plug, nylon, .625-1.187"HBL9379angle 4 position. (15.9-30.2)

Notes: All HP ratings listed above are AC only. HP ratings for 125V devices are basedon 120VAC and 250V rated devices are based on 208 to 240VAC.

*Devices listed above with suffix CN have Robertson/slotted mounting screws.All others have slotted mounting screws.See Section G for full line of Circuit Guard® isolated ground devices.See pages A-44 and A-45 for accessories.

G

NEMA 7-50RUL CSA

5 HP

W

G

NEMA 7-50PUL CSA

5 HP

W

G

NEMA 6-50RUL CSA

3 HP

G

NEMA 6-50PUL CSA

3 HP

G

NEMA 6-50RUL CSA

3 HP

G

NEMA 6-50PUL CSA

3 HP

G

NEMA 5-50RUL CSA

2 HP

G

NEMA 5-50PUL CSA

2 HP

WW

G

NEMA 7-30RUL CSA

3 HP

W

G

NEMA 7-30PUL CSA

3 HP

W

G

NEMA 6-30RUL CSA

2 HP

G

NEMA 6-30PUL CSA

2 HP

G

NEMA 6-30RUL CSA

2 HP

G

NEMA 6-30PUL CSA

2 HP

G

NEMA 5-30RUL CSA

2 HP

W

G

NEMA 5-30PUL CSA

2 HP

W

Straight Blade Devices2 Pole,3Wire Grounding30 and 50 Ampere, 125, 250 Volt and 277 VACSingle Receptacles and Plugs

2.00"(50.8)

1.77"(45.0)

2.10"(53.3)

2.13"(54.1)

HBL9330

2.75"(69.9)

4.33"(110.0)

1.88"(47.8)

HBL9331

IP20SUITABILITY

IG9330

2.00"(50.8)

1.77"(45.0)

2.10"(53.3)

2.13"(54.1)



3Pole,3Wire Non-Grounding Receptacles and PlugsRating Configuration Description Cord Dia. Catalog No.

20A 125/250V Receptacle, HBL6810black phenolic.

20A 125/250V Plug, Insulgrip, .385-.780" HBL9977Cnylon. (9.8-19.8)

All horsepower ratings listed above are AC only. Horsepower rating not in parenthesesare phase to phase, (208 to 240V AC). Those in parentheses are phase to neutral,(120V AC).

W

NEMA 10-20RUL Listed2(1) HP

X

YW

NEMA 10-20PUL Listed

2(1) HP

X

Y

A-34

HBL6810

3.28"(83.3)

.97"(24.6)

1.39"(35.3)

HBL9977C

1.94"(49.2)

2.50"(63.5)

Straight Blade Devices3Pole,3Wire Non-Grounding20 Ampere, 125/250 Volts AC or DCSingle Receptacles and Plugs

IP20SUITABILITY

S7

Flush Cover PlatesFor 6810 Receptacles Catalog No.

Nylon, black, smooth, single gang. P7B

Stainless steel, 302/304 smooth, single gang. S7

Brass, .04" (1.0), smooth, single gang. B7

Refer to Section D for more details on cover plates.


Stra

ight B

lade

Devic

es

30A &

50A, 125/250V, 3P

3W



30A 125/250V Receptacle, HBL9395surface mount aluminum housing.

30A 125/250V Plug, Insulgrip, .625-1.00" HBL9337Cnylon. (15.9-25.4)

30A 125/250V Plug, nylon, .625-1.187" HBL9333angle, 4 position. (15.9-30.2)


50A 125/250V Receptacle, HBL7940surface mount, aluminum housing.

50A 125/250V Plug, Insulgrip, .625-1.218" HBL7513Cnylon. (15.9-30.9)

50A 125/250V Plug, nylon, .625-1.187" HBL7977*angle, 4 position. (15.9-30.2)

50A 125/250V Connector body, .625-1.218" HBL7515CInsulgrip, nylon. (15.9-30.9)

All horsepower ratings listed above are AC only. Horsepower ratings not in parenthesesare phase to phase, (208 to 240V AC). Those in parentheses are phase to neutral,(120V AC).

*Add “CN” suffix for Robertson/slotted screws. HBL7977CN will be discontinued when stock is exhausted.

Flush Cover PlatesFor 9350-7962 ReceptaclesDescription Catalog No.

Nylon, black, smooth, 2 gang. P703B

Stainless steel 302/304 smooth. S723

Cast aluminum, with lift cover, weatherproof. IP44 SUITABILITY HBL9420

Cast aluminum, without lift cover. HBL9419

W


X

YW

NEMA 10-50PUL Listed 3(2) HP

X

Y

W


X

YW

NEMA 10-30PUL Listed 2(2) HP

X

Y

2.50"(63.5)

2.09"(53.1)

1.69"(42.9)

HBL9350

5.06"(128.5)

2.13"(54.1)

2.06"(52.3)

2.50"(63.5)

HBL9395

2.75"(69.9)

4.33"(110.0)

1.88"(47.8)

HBL9333

2.88"(73.2)

4.13"(104.9)

HBL7513C

HBL7515C

2.88"(73.2)

5.75"(146.1)

Straight Blade Devices3Pole,3Wire Non-Grounding30 and 50 Ampere, 125/250 Volts AC or DCSingle Receptacles and Plugs

IP20SUITABILITY


3Pole,4Wire Grounding Receptacles and PlugsRating Configuration Description Cord Dia. Catalog No.

20A 125/250V Receptacle, HBL8410black phenolic, back & side wired.

20A 125/250V Plug, nylon, .390-.775" HBL8411Cangle 4 Position. (9.9-19.7)

20A 3Ø 250V Receptacle, HBL8420black phenolic, back & side wired.

20A 3Ø 250V Plug, nylon, .390-.775" HBL8421Cangle 4 Position. (9.9-19.7)

Notes: Horsepower ratings listed above are AC only. Horsepower ratings not in parentheses are phase to phase, (208 to 240V AC). Horsepower ratings in parentheses are phase to neutral, (120V AC).

G

NEMA 15-20RUL CSA

3 HP

Y

ZX

G

NEMA 15-20PUL CSA

3 HP

Y

ZX

G

NEMA 14-20RUL CSA2(1) HP

W

YX

G

NEMA 14-20PUL CSA2(1) HP

W

Y X

A-36

Straight Blade Devices3Pole,4Wire Grounding20 Ampere, 125/250 Volts and 3Ø 250 VoltsReceptacles and Plugs

2.38"(60.5) 1.39"

(35.3)

1.19"(30.2)

HBL8410

2.34"(59.4)

3.64"(92.5)

1.61"(40.9)

HBL8411C

IP20SUITABILITY

Gripping ribs provide secure gripping area.

Floating “V” bottom contact lugs bundle strands to provide high contact pressure and low operating temperatures.

Captive Allen head terminal screws — user-ready.

Captive Allen head terminal screws permit high clamping pressure and torque requiredfor larger size conductors. User-ready.

Reinforced thermoplastic polyester provides high impact and heat resistance.

Catalog number, NEMA number, ratings and certifications molded in face.

Supertough® nylon housing provides high impact resistance.

Heavy duty cable grips handle a wide range of cable sizes to prevent conductor move-ment that can cause strain on the terminals.

Neoprene dust shields fit a variety of cable diameters to provide a reliable seal to keep dust out.

One piece design power and ground contacts provide low operating temperatures.

Sequenced contacts assure protection for people and equipment.

Catalog number, NEMA number, ratings and certifications molded in face.

Plated steel mounting plate provides corrosion resistance. Unit mounts in a 2 gang box.

A-37

Heav

y Duty D

evic

es

Features and B

enefitsStraight Blade DevicesHeavy Duty INSULGRIP®30, 50, 60 Amp Plugs and Receptacles

SUPERTOUGH® is a registered trademark of DUPONT®.


3Pole,4Wire, Grounding Receptacles and PlugsRating Configuration Description Cord Dia. Catalog No.

30A 125/250V Receptacle, HBL9430Ablack RTP.

30A 125/250V Plug, nylon. .625-1.310" HBL9431C(15.9-33.3)

30A 125/250V Plug, nylon, .625-1.310" HBL9432Cangle 4-position. (15.9-33.3)







30A 3Ø 250V Receptacle, HBL8430Ablack RTP.

30A 3Ø 250V Plug, nylon. .625-1.310" HBL8431C(15.9-33.3)

30A 3Ø 250V Plug, nylon, .625-1.310" HBL8432Cangle 4-position. (15.9-33.3)







Notes: RTP is an abbreviation for reinforced thermoplastic polyester. Horsepower ratings not in parentheses are phase to phase, 208 to 240V AC. Those in parentheses are phase to neutral, 120V. See pages A-44 and A-45 for accessories.See page A-50 for technical information.

G

NEMA 15-60R10 HP

YZ

X

G

NEMA 15-60P10 HP

YZ X

G

NEMA 15-50R7.5 HP

YZX

G

NEMA 15-50P7.5 HP

YZ X

G

NEMA 15-30R3 HP

YZX

G

NEMA 15-30P3 HP

YZ X

G

NEMA 14-60R3(2) HP

W

ZX

G

NEMA 14-60P3(2) HP

W

Z X

G

NEMA 14-50R3(2) HP

W

YX

G

NEMA 14-50P3(2) HP

W

Y X

NEMA 14-30R2(2) HP

NEMA 14-30P2(2) HP

G

W

YX

G

W

Y X

HBL9430A

2.37"(60.3)

1.81"(46.0)

#6-32 UNC-2B

3.28"(83.3)

2.88"(73.2)

4.13"(104.9)

HBL9431C

4.5"(114.3)

2.37"(60.2)

3.38"(85.8)

HBL9432C

Straight Blade Devices3Pole,4Wire Grounding30, 50 and 60 Ampere, 125/250 Volts and 3Ø 250 VoltsReceptacles and INSULGRIP® Plugs

IP20SUITABILITY


Stra

ight B

lade

Devic

es

20A, 30A

, 50A &

60A

AccessoriesCover PlatesDescription Catalog Numbers

Steel 4" (101.6) sq. 1⁄2" (12.7) raised, 8137.3 cubic inch capacity.

Steel 411⁄16" (119.0) sq. 1⁄2" (12.7) raised, 88810.3 cubic inch capacity.

Stainless steel 302/304 smooth. S701

2.38"(60.5) 1.39"

(35.3)

1.19"(30.2)

HBL7250

2.34"(59.4)

3.64"(92.5)

1.61"(40.9)

HBL7251C

HBL8330A

2.28"(57.9)

1.81"(46.0)

#6-32 UNC-2B

3.28"(83.3)

HBL8331C

4.13"(104.9)

2.88"(73.2)

4.5"(114.3)

2.37"(60.2)

3.38"(85.9)

HBL8332C

Straight Blade Devices4Pole,4Wire Non-Grounding20, 30, 50, and 60 Ampere 3Ø WYE 120/208 Volts Receptacles and INSULGRIP® Plugs


20A 3Ø 120/208V Receptacle, HBL7250black phenolic.

20A 3Ø 120/208V Plug, nylon, .390-.775" HBL7251Cangle 4-position. (9.9-19.7)

30A 3Ø 120/208V Receptacle, HBL8330Ablack RTP*

30A 3Ø 120/208V Plug, nylon. .625-1.310" HBL8331C(15.9-33.3)

30A 3Ø 120/208V Plug, nylon, .625-1.310" HBL8332Cangle 4-position. (15.9-33.3)







Note: Horsepower ratings listed above are AC only. Horsepower ratings are phase to phase, (208 to 240VAC). *RTP is an abbreviation for reinforced thermoplastic polyester.

NEMA 18-60RUL Listed

7.5 HP


7.5 HP

YX Z

YXZ

W W


7.5 HP


7.5 HP

YZX

YZ X

W W


3 HP


3 HP

W

Y

ZX

W

Y

Z X


2 HP

Y

Z


2 HP

XW

Y

ZW

X

IP20SUITABILITY

IP44SUITABILITY

Weatherproof Lift Cover PlatesDescription Catalog Numbers

Gray, thermoplastic, corrosion-resistant, for two-gang FS/FD box HBL7777Ahaving plate mounting holes 31⁄4"x 33⁄4"on center.

Same as above except yellow. HBL77CM77A

PLUGOUT® Lockout Device Description Catalog Number

Electrical plug lockout device. HLD2

Discontinued when

stock is exhausted



Straight Blade Devices2 Pole,3Wire Grounding16 Ampere, 250 Volts International20 Ampere, 250 Volts North American RatedI.E.C.320 Appliance Couplers

InletsDescription Catalog Numbers

20/16A 250V AC I.E.C. straight blade H320BSame as above with retention clamp. H320BL

Receptacle I.E.C. 320 CompatibleDescription Catalog Number

20/16A 250V AC I.E.C. straight blade. H320R

Note: See page A-51 for technical information.

Plug I.E.C. 320 CompatibleDescription Catalog Number

20/16A 250V AC I.E.C. straight blade. H320P

ConnectorDescription Catalog Number

20/16A 250V AC I.E.C. straight blade. H320C

H320B

1.28"(32.5)

.22"(5.6)

1.64"(41.7)

1.19"(30.2)

1.47"(37.3)

H320BL

1.64"(41.7)

1.28"(32.5)

.22"(5.6)

1.19"(30.2)

1.47"(37.3)

H320C

1.42"(36.1)

1.95"(49.5)

.41"(10.4)

H320P

1.36"(34.5)

1.52"(38.6)

2.75"(69.9)

H320R

1.55"(39.4)

1.89"(48.0)

1.52"(38.6)

1.41"(35.8)

IP20SUITABILITY

IP20SUITABILITY

AccessoriesDescription Catalog Numbers

Thread lubricant, 6 oz. LUBG6

Drain and breather. KDB1**

Strain relief grip–cable range .540 to .635" (13.7 to 16.1). UGMG

**Suitabilities–Class I Div. 1 & 2; Groups C, D, Class II Div. 1 & 2; Groups E, F, G, Class III.


Stra

ight B

lade

Devic

es

AC

CE

PTO

R®

System

SWB Series BoxesHub Size Catalog Numbers

Single-Gang Single-Gang Two-Gang Dead End Feed Thru Dead End

1⁄2" SWB1 SWB4 SWB73⁄4" SWB2 SWB5 SWB8Class I, Div. 1 & 2, Groups C, DClass II, Div. 1 & 2, Groups E, F, GClass IIINEMA 7 C D, 9 E F G

Straight Blade Devices2Pole,3Wire Grounding15 and 20 Ampere, 125 and 250 VoltsHazardous Location Receptacles, Plugs, Boxes and Accessories

4.62"(117.3)

3.00"(76.2)

UGRO20231

Acceptor®

Hazardous Location ReceptaclesDescription Catalog Numbers

Explosion and dust ignition proof. UGRO20231 UGRO20232Class I, Div. 1 & 2, Groups C, D UGRA20231* UGRA20232*Class II, Div. 1 & 2, Groups F, GClass IIINEMA 3, 7 B C D, 9 F G

*UGRA version includes an adapter plate for mounting to Crouse-Hinds® EDS seriesand Appleton® EFD series back boxes. UL Listed for Class 1, Div. 2, Groups B, C, D.

G



G

W

Acceptor Hazardous Location PlugsDescription Catalog Numbers

Explosion and dust ignition proof. UGP15231 UGP20231 UGP20232Class I, Div. 1 & 2, Groups B, C, DClass II, Div. 1 & 2, Groups E, F, GClass IIINEMA 3, 7 B C D, 9 F G

G

NEMA 6-20P20A 250V

UL CSA

NEMA 5-20P20A 125V

UL CSA

G

W

NEMA 5-15P15A 125V

UL CSA

G

Wwhere applicable

UGP15231

1.51"(38.4)

1.69"(42.9)

2.55"(64.8)

SWB1

4.63"(117.6)

2.25"(57.2)

3.00"(76.2)

SWB5

4.63"(117.6)

2.25"(57.2)

3.00"(76.2)

SWB8

4.63"(117.6)

2.25"(57.2)

6.50"(165.1)

Discontinued when

stock is exhausted



Straight Blade Devices AccessoriesFor 15 and 20 Ampere, 125 and 250 Volts and 277V AC Devices

P8

P7

HBL5222

HBL5206WO

HBL7423WO

Wall Plates, Single GangSingle Receptacle with Face

Duplex Dia. 1.39"Description Color Receptacle (35.3)

Smooth nylon. Ivory P8 P7Brown P8X P7XGray P8G P7GBlack P8B P7BRed P8R P7RWhite P8W P7W

Stainless 302/304 satin, smooth. S8 S7Brass .040” (1.02) brushed, smooth. B8 B7

Aluminum, anodized, smooth. A8 A7

Weatherproof Lift Cover PlatesSingle Receptacle with Face

Duplex Dia. 1.39"Description Receptacle (35.3)

Polycarbonate, gray, for FS/FD box mounting. HBL5221HBL7423WOPolycarbonate, yellow, for FS/FD box mounting. HBL52CM21 HBL74CM23WO

Polycarbonate, gray, for device mounting. HBL5222 –

Polycarbonate, yellow, for device mounting. HBL52CM22 –

Cast aluminum for FS/FD box mounting. HBL5206WO HBL7420

Cast aluminum for device mounting. HBL5205WO –

Note: All weatherproof plates are UL Listed for Wet Locations. Those with suffix WO are listed for use with cover open, all others with cover closed. See plate section for more details.

IP44SUITABILITY


Straight Blade Devices AccessoriesFor 15 and 20 Ampere, 125, 250 Volts and 277V AC Devices

A-43

Stra

ight B

lade

Devic

es

Accessories

WP1

HBL6017

HBL6018

HBL60CM19Shown with HBL6018

HLDMP

3.14"(79.8)

4.22"(107.2)

HLD

7.27"(184.7)

4.27"(108.5)

Weatherproof Lift CoverFor Nylon Flanged Inlets & Flanged ReceptaclesDescription Catalog No.

Polycarbonate, gray, for FS/FD box mounting WP1

Note: See plate section (D) for more details

PLUGOUT® Device Description Catalog No.

Electrical plug lockout devices for molded on plugs. HLDMP

Electrical plug lockout device for wired on plugs. HLD

Note: See Section G for complete detail on lockout devices.

Weatherproof BootsDescription Catalog No.

Seal-Tite® triple seal, black elastomer cover for Insulgrip® plugs, HBL6017(HBL5266C™ style), when used in a cord set, and connectors(HBL5269C™ style), when used with flanged inlets.

Same as above except yellow. HBL60CM17

Seal-Tite Triple seal, black elastomer cover for use with Insulgrip HBL6018connectors, (HBL5269C™ type), when used in a cord set.

Same as above but yellow. HBL60CM18

Closure plug, black. HBL6019

Closure plug, yellow. HBL60CM19

Note: Boots are not UL Listed.*IP55 when installed and used properly with mating components.

IP44SUITABILITY

IP55*

SUITABILITY


Straight Blade Devices AccessoriesFor 3 Wire 30 and 50 Ampere, 125, 250 Volts and 277V AC

Cover PlatesDescription Catalog No.

Stainless steel, 302/304, satin, smooth, single gang. S723

Stainless steel, 302/304, satin, smooth, two gang. S703

Aluminum, smooth, single gang. A723

Nylon, smooth, black, two gang. P703B

Weatherproof CoverDescription Catalog No.

Cast aluminum for FS/FD box mounting. HBL9420


Electrical plug lockout devices for 30, 50 and 60A devices. HLD2

Note: See Section G for complete details on lockout devices.

1/2"(12.7) Raised Steel CoversDescription Catalog No.

4" (101.6) square, 7.3 cubic inch capacity. 810

411⁄16" (119.1) square, 10.3 cubic inch capacity. 878

S723

S703

810

HBL9420

HLD2

12.5"(317.5)

6.31"(160.3)

IP44SUITABILITY


Straight Blade Devices AccessoriesFor 4 Wire 30, 50 and 60 Ampere, 125/250 Volts and 3Ø 277V AC

A-45

Stra

ight B

lade

Devic

es

Accessories

Weatherproof Lift Cover PlatesDescription Catalog No.

Polycarbonate, gray, lift cover plate. Will fit FS/FD boxes having HBL7777Aplate mounting hole 3.25" x 3.75" (82.5 x 95.2), centers. Only for receptacles listed on pages A-38 and A-39 with suffix “A”.

Same as above except yellow. HBL77CM77A


Electrical plug lockout device for 30, 50 and 60A devices. HLD2

Note: See Section G for complete details on lockout devices.

1/2" (12.7) Raised Steel CoversDescription Catalog No.

4" (101.6) square, 7.3 cubic inch (119.6cm3) capacity. 813

411⁄16" (119.1) square, 10.3 cubic inch (168.8cm3) capacity. 888

Wall Plates, 2-GangDescription Catalog No.

Stainless steel 302/304, satin, smooth. S701

Brass .040" (1.0), brushed, smooth. B701

S701

888

HBL7777A

HLD2

12.5"(317.5)

6.31"(160.3)

IP44SUITABILITY

Straight Blade Devices Technical Information

A-46

INSULGRIP® Plugs and Connectors

SpecificationsPlug Part Description

Typical Specification–Catalog No. HBL5266C Plug 15AManufacturer’s Identification–Hubbell HBL5266C™ Plug Housing Nylon–Black

Blade Holder Nylon–NaturalDescription–Straight Body Plug Retainer Polycarbonate–ClearType–2 Pole, 3 Wire, Grounding Cord Clamp Nylon–NaturalRating–15A, 125V Contact Blades .060" (1.5) Brass Certification–UL Listed File E1706, CSA Certified Ground Contact Blade .040" (1.0) Copper Alloy IP Suitability – IP20 Binding Screws Brass–Combination Phillips/Slotted

Hex. HD. Binding Screw Brass–(Green) Phillips/SlottedWire Clamps .062" (1.5) steel–Nickel Finish

Connector Part Description

Typical Specification–Catalog No. HBL5269C Connector 15AManufacturer’s Identification–Hubbell HBL5269C™ Housing Nylon–Black

Connector Contact Holder Nylon–NaturalDescription–Straight Body Connector Retainer Polycarbonate–ClearType–2 Pole, 3 Wire, Grounding Cord Clamp Nylon–NaturalRating–15A, 125V Contacts .040" (1.0) Copper Alloy Certification–UL Listed File E1706, CSA Certified Binding Screws Brass–Combination Phillips/Slotted

(15A only) Gr. Hex. HD. Binding Screw Brass–(Green) Phillips/SlottedIP Suitability – IP20 Wire Clamps .062" (1.5) steel–Nickel Finish

PerformanceElectrical

Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 125V or 250V as rated.Current Interrupting Certified for current interrupting at full rated current.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of

overload at 150% of rated current with direct current.

Mechanical

Terminal Identification Terminals identified in accordance with UL498 (Brass, White, Green).Terminal Accommodation #18-10 AWG.Product Identification Ratings are a permanent part of the device.Torque Range Cord clamp/terminal screws–9 to 12 in. lbs.Cord Diameter Range .230"–.720" (5.8–18.3) Integral cord grip.

Environmental

Flammability UL 94 HB or better.Operating Temperatures Maximum continuous 60°C, minimum–40°C (w/o impact).

Please consult the factory for product dimensions and specifications for other products listed in this catalog.Note: Insulgrip products with CN suffix feature combination Robertson/slotted screws.

HBL5269CHBL5266C



Heavy Duty Straight Blade Duplex Receptacle

SpecificationsReceptacle Part Description

Typical Specification–Catalog No. 5262 Receptacle 15AManufacturer’s Identification–Hubbell 5262 Top NylonDescription–Heavy Duty Straight Blade Duplex Receptacle Base RTP*Type–2 Pole, 3 Wire, Grounding By-Pass Power Contacts .037" (.9) BrassRating–15A, 125V Clamping Plate .031" (.8) Brass Certification: UL Listed, File E2186, Guide RTRT Mounting Strap .050" (1.3) Brass

Fed Spec WC596F, Meets NEMA Terminal Screws Brass #8-32WD-1 Heavy Duty and WD-6 requirements Hex Head Grounding Screw Brass (Green)Listed to UL Standard 498, Center Assembly Rivet BrassCertified to CSA, C22.2, No. 42 Auto. Grd. Clip Stainless Steelwhere applicable Flat Hd. Mtg. Screws Steel-Zinc Plated


Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 250V.Current Interrupting Certified for current interrupting at full rated current.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of


Mechanical

Terminal Identification Terminals identified in accordance with UL 498 (Brass, White, Green).Terminal Accommodation #14–#10 AWGcopper conductor only.Product Identification Ratings are a permanent part of the device.

Environmental

Flammability Top: UL 94 V2.Base: UL 94 V0 and UL 94-5 VA.

Operating Temperatures Maximum continuous 60°C, minimum -40°C (w/o impact).

*Reinforced Thermoplastic Polyester.

A-47

Heav

y Duty R

ecepta

cle

sTechnical Inform

ation

5262


A-48


Compact Straight Blade Duplex Receptacle


Typical Specification–Catalog No. 5252 Receptacle 15AManufacturer’s Identification–Hubbell 5252 Top NylonDescription–Straight Blade Duplex Receptacle Base MelamineType–2 Pole, 3 Wire, Grounding Triple Wipe Power Contacts .032" (.8) Brass Rating–15A, 125V Wireclamp .062" (1.8) Steel Certification–UL Listed File E2186, Guide Mounting Strap .050" (1.3) Brass

Fed. Spec. WC 596F, Terminal Screws Brass #8-32Listed to UL Standard 498. Hex. HD. Grounding Screw Brass–(Green)Certified to CSA 22.2, No. 42 Center Assembly Rivet Brasswhere applicable. Auto Grd. Clip Stainless Steel

Flat HD. Mtg. Screws Steel-Zinc Plated


Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 250V.Current Interrupting Certified for current interrupting at full rated current.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of


Mechanical

Terminal Identification Terminals identified in accordance with UL498 (Brass, White, Green).Terminal Accommodation #14-10 AWG copper conductor only.Product Identification Ratings are a permanent part of the device.

Environmental

Flammability UL 94 V2.Operating Temperatures Maximum continuous 60°C, minimum -40°C (w/o impact).

Please consult the factory for product dimensions and specifications for other products listed in this catalog.

5252



4-PLEX® Receptacle*


Typical Specification–Catalog No. 415 Receptacle 15AManufacturer’s Identification–Hubbell 4-PLEX 415 Receptacle Top Lexan®

Description–Straight Blade, Multiple Outlet Receptacle Base LexanType–2 Pole, 3 Wire, Grounding Power Contacts .032" (.8) Brass Rating–15A, 125V Ground Contacts .031" (.8) Brass Certification–Listed to UL Standard 498. Ground Plate .032" (.8) Plated Steel

Certified to CSA 22.2, No. 42 (Hospital Grade) .050" (1.3) Plated Steel where applicable. Line Terminal Plate .031" (.8) Brass

Neutral Terminal Plate .031" (.8) Brass Terminal Screws #8-32 Brass

Combo. Robertson/SlottedHex Head Grounding Screw Brass–Green


Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 250V.Current Interrupting Capable of withstanding a fault level of 1000A, per UL498.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of

overload current at 150% of rated current at a power factor of 75%.

Mechanical

Terminal Identification Terminals identified in accordance with UL498 (Brass, White,Green).Terminal Accommodation #14-12 AWG copper conductor only.Product Identification Ratings are a permanent part of the device.

Environmental

Flammability UL 94 V2.Operating Temperatures Maximum continuous 60°C, minimum -40°C (w/o impact).

*Note: For Circuit Guard® surge suppression receptacle specifications, see Safety Devices Section (G).

A-49

4-P

LE

X®

Recepta

cle

sTechnical Inform

ation

Lexan® is a registered trademark of General Electric Co.

415


A-50


Heavy Duty INSULGRIP® Straight Blade 30, 50, 60A Plugs and Receptacles

SpecificationsPlug Part Description

Typical Specification–Catalog No. 9431C Plug 30AManufacturer’s Identification – Hubbell 9431C Housing Supertough® NylonDescription–Straight Body Plug Blade Holder & Retainer Reinforced Thermoplastic PolyesterType–3 Pole, 4 Wire, Grounding Blades BrassRating–30A, 125/250V Terminal Screws 3⁄8" Allen Head, Plated SteelCertification–UL Listed File E1706, CSA Certified* Box Terminals CopperIP Suitability – IP20 Cord Clamps Reinforced Thermoplastic Polyester

Mounting and Clamp Screws Stainless SteelCord Grip Range .625 –1.310" (15.9–33.3)

Receptacle Part Description

Typical Specification–Catalog No. 9430A Receptacle 30AManufacturer’s Identification – Hubbell 9430A Housing Construction Reinforced Thermoplastic PolyesterDescription–Single Receptacle Mounting Plate .062" (1.5) Pre-Plated Steel Type–3 Pole, 4 Wire, Grounding Contacts BrassRating–30A, 125/250V Ground Shunt BrassCertification–UL Listed File E2186, CSA Certified Terminal Screws 3⁄8" Allen Head, Plated Steel

Box Terminals Copper


Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 125V or 250V as rated.Current Interruption Certified for current interrupting at full rated current.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of

overload at 150% of rated current at a power factor of 75%.

Mechanical

Terminal Identification Terminals identified in accordance with UL 498 (Brass, White, Green).Terminal Accommodation #12 AWG through #4 AWG copper.Production Identification Ratings are a permanent part of the device.

Environmental

Flammability Receptacle: UL 94 V0.Plug: UL 94 HB (Housing), UL 94 V0 (Blade Holder and Retainer).

Operating Temperatures Maximum continuous 60°C, minimum -40°C (w/o impact).

*Listed to UL Standard 498 (Attachment Plugs and Receptacles), Certified to CSA Standard 42M (General Use Receptacles,Attachments, Plugs and Singular Wiring Devices) where applicable.

9431C 9430A



IEC 320 Devices

SpecificationsPlug

Catalog Number H320P.Description IEC Configuration compatible straight blade Valise® plug.Type 2-pole + earth.Rating 16A 250V AC for European service;

20A 250V A.C for North American service.Certification UL listed 20A 250V AC–File No. E1706;

CSA Certified 20A 250V AC–File No. 17337.Cord Accommodation North American–16/3 SJ-12/3SJ (.325-.475" dia.);

International–(Har Cord) 3x1.5mm2 3x2.5mm2 (8-12mm dia.).IP Suitability IP20.

Receptacle

Catalog Number H320R.Description IEC Configuration compatible straight blade panel mount receptacle.Type 2-pole + earth.Rating 16A 250V AC for European service;

20A 250V AC for North American service.Certification UL listed 20A 250V AC–File No. E2186;

CSA certified 20A 250V AC–File No 17337.Terminal Accommodation North American–#16AWG-#12AWG;

International–1.55mm2-2.5mm2.

Connector

Catalog Number H320C.Description IEC Detachable straight blade connector.Type 2-pole + earth.Rating 16A 250V AC for European service;

20A 250V AC for North American service.Configuration IEC 320, C19.Certification UL listed 20A 250V AC–File No. E1706;

CSA Certified 20A 250V AC–File No. 17337; UL classified to IEC 320, 16A 250V AC–File No. E111246; TUV certified at 16A 250V AC–File No. E77112.

Cord Accommodation North American–16/3SJ-12/3SJ (.275-.475" dia.); International–(HAR cord) 3x1.5mm2-3x2.5mm2 (8mm-12mm dia.).

IP Suitability IP20.

Inlet

Catalog Number H320B & H320BL.Description IEC Straight blade panel mount power inlet.Type 2-pole + earth.Rating 16A 250V AC for European service;

20A 250V AC for North American service.Configuration IEC 320, C20.Certification UL listed 20A 250V AC–File No. E1706;

CSA certified 20A 250V AC–File No. 17337; UL classified to IEC 320, 16A 250V AC–File No. E111246; TUV and VDE certified at 16A 250V AC–File No. 12469 1550 1002.

Terminal Accommodation North American–#16AWG-#12AWG; International–1.5mm2-2.5mm2.

A-51

I.E.C

. 32

0 D

evic

es

Technical Information

H320P H320C

H320R H320B



Hospital Grade, Straight Blade Duplex Receptacle


Typical Specification–Catalog No. 8200 Receptacle 15AManufacturer’s Identification–Hubbell 8200 Top Thermoplastic PolyesterDescription–Hospital Grade, Straight Blade Duplex Receptacle Base RTP*Type–2 Pole, 3 Wire, Grounding By-Pass Power Contacts .037" (.9) Brass – Ni PlatedRating–15A, 125V Clamping Plate .031" (.8) Brass – Ni PlatedCertification: UL Listed, File E2186, Guide RTRT Mounting Strap .050" (1.3) Brass – Ni Plated

Fed Spec WC596F1, Hospital Grade Meets Terminal Screws #8-32 Silicon BronzeNEMA WD-1 Heavy Duty and WD-6 requirements Hex Head Grounding Screw (Green) Silicon BronzeListed to UL Standard 498, Center Assembly Rivet Silicon BronzeCertified to CSA, C22.2, No. 42 Auto. Grd. Clip Stainless Steelwhere applicable Flat Hd. Mtg. Screws Stainless Steel

Ground Shields Steel – Ni Plated


Dielectric Voltage Withstands 2,000V minimum.Max. Working Voltage 250V.Current Interrupting Certified for current interrupting at full rated current.Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles

of overload at 150% of rated current with direct current.

Mechanical

Terminal Identification Terminals identified in accordance with UL 498 (Brass, White, Green).Terminal Accommodation #14–#10 AWGcopper conductor only.Product Identification Ratings are a permanent part of the device.

Environmental

Flammability UL 94 V0 and UL 94-5 VA.Operating Temperatures Maximum continuous 60°C, minimum -40°C (w/o impact).

*Reinforced Thermoplastic Polyester

Ni = Nickel

A-52 Dimensions in Inches (mm)

8200

Date post:	24-Sep-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Section A Straight Blade Devices · Robertson/slotted head terminal and cord clamp screws. All...

Documents