Date post: | 25-May-2018 |
Category: |
Documents |
Upload: | dangkhuong |
View: | 239 times |
Download: | 0 times |
E1
Fin
e Sp
ray
no
zzle
S
Overview
Standard Spray
Hydraulic Atomizing Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . E3
UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E6
Wide angle Spray
Hydraulic Atomizing Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . E9
FogJet® Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E11
Hydraulic Fogging Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . E14
narrow angle Spray
FogJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E15
– Simply unscrew the retainer cap and remove the spray tip by hand . Then install the new spray tip and tighten the retainer cap to secure the spray tip in place .
– Available in metal materials .
Watch for the UniJet designation on the following pages . These nozzles are available with a wide variety of body types, mounting options, adapters, plugs, strainers, check valves, plates, fittings and more . See Section L, Accessories, for complete information .
Fine Spray Nozzles Table of Contents
Section E – Fine Spray Nozzles
Standard nozzles: Traditional threaded nozzles made of metal .
Quick-Connect nozzles: Consisting of a nozzle body and spray tip, quick-connect nozzles can reduce maintenance time and lower costs . The spray tips can be removed for cleaning and/or replacement while the nozzle bodies remain on the pipe or spray header .
• UniJet® nozzles:
Our fine spray hydraulic atomizing nozzles are available in two styles .
UniJetUniJet
Female body
Male body
Screen strainer
Spray tip
Tip retainer
High pressure female body
Gasket
Screen strainer
Tip gasket
Spray tip
Tip retainer
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E2
Fin
e S
pr
ay
No
zz
le
s
• Reduce operating costs and maintenance downtime by using quick-connect nozzles. Nozzle bodies remain on the header – only spray tips are replaced.
• Use strainers to reduce nozzle clogging and ensure optimum performance.
• Use adjustable ball connections for quick, precise nozzle orientation.
• Evaluate your specific spraying application and implement a regular nozzle maintenance plan.
Optimization Tips
Maintenance essentials include:
– Visual inspection of spray pattern. Orifice wear in hollow cone nozzles will destroy the spray pattern uniformity. Streaks will develop and the pattern will become heavy or light in sections of the spray. Orifice wear in full cone nozzles also causes spray pattern deterioration as more liquid flows to the center of the pattern.
– Monitor flow rate and pressure to detect changes resulting from orifice wear. Orifice wear in nozzles will destroy the spray pattern uniformity, and deterioration, this can also result in larger drop sizes. Larger drops can reduce fogging and misting effectiveness and result in less total liquid surface area.
Fine Spray Nozzles
Ball Connections
Spray Pattern Inspection
Strainers
UniJet® Nozzles with Replaceable Tips
Adjustable
Fine hydraulic full cone spray
Fine hydraulic hollow cone spray
T female bodies or
TT male bodies
UniJet tips
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E3
Fin
e Sp
ray
no
zzle
S
Hydraulic Atomizing Spray Nozzles, Standard Spray
Wall-mountedIntegral strainer
1/4" NPT or BSPT (M)with 1/2" NPT (M)
wall-mounting threads
Wall-mountedIntegral strainer
1/4" NPT or BSPT (F)with 1/2" NPT (M)
wall-mounting threads
LND LNNDLN
Integral strainer1/4" NPT or BSPT (F)
LNN
Integral strainer1/4" NPT or BSPT (M)
• Evaporative cooling
• Humidifying
• Light misting
• Moistening
Applications
• See page E2 for optimization tips.
Optimization Tips
• Very fine atomized sprays in a hollow cone spray pattern using liquid pressure alone – compressed air not required.
• Uniform distribution over a wide range of flow rates and pressures.
• Very small drops often achieving misting performance.
• Wall-mounted options for installation on room exterior, vessel or pipeline.
• Orifice inserts, cores and strainers are easily removed for inspection or cleaning.
• Most models can be supplied with an internal strainer.
Features and Benefits
N MNN
Two-piece design1/4" NPT or BSPT (M)
1/4" NPT or BSPT (F) 1/4" NPT or BSPT (M)
http://See Also
• Accessories
– Adjustable ball fittings
– Check valves
– Pressure gauges
– Pressure regulators
– Pressure relief valves
– Solenoid valves
– Strainers
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E4
Fin
e S
pr
ay
No
zz
le
s
Hydraulic Atomizing Spray Nozzles, Standard Spray
Performance Data
*At the stated pressure in psi.
InletConn.(in.)
Nozzle Type CapacitySize
OrificeDia.
Nom.(in.)
CoreNo.
Capacity(gallons per hour)*
SprayAngle
(°)*
LN LNN LND LNND N NN M 30 40 60 100 200 300 500 700 1000 40 80 300
1/4
l l .30 .016 106 – – – – – .82 1.1 1.3 1.5 – – 51
l l .40 .016 108 – – – – – 1.1 1.4 1.7 2.0 – – 58
l .50 .016 109 – – – – 1.1 1.4 1.8 2.1 2.5 – – 63
l l l l l l l .60 .016 206 – – – .95 1.3 1.6 2.1 2.5 3.0 – 35 65
l l l l l l l 1 .020 210 – 1.0 1.2 1.6 2.2 2.7 3.5 4.2 5.0 45 62 72
l l l l l l l 1.5 .020 216 1.3 1.5 1.8 2.4 3.4 4.1 5.3 6.3 7.5 65 70 72
l l l l l l l 2 .028 216 1.7 2.0 2.4 3.2 4.5 5.5 7.1 8.4 10.0 70 75 77
l l l l l l l 3 .028 220 2.6 3.0 3.7 4.7 6.7 8.2 10.6 12.5 15.0 65 70 73
l l l l l l l 4 .042 220 3.5 4.0 4.9 6.3 8.9 11.0 14.1 16.7 20 72 81 84
l l l l l l l 6 .042 225 5.2 6.0 7.3 9.5 13.4 16.4 21 25 30 73 79 81
l l l l l l l 8 .060 225 6.9 8.0 9.8 12.6 17.9 22 28 33 40 85 89 91
l l l l l l l 10 .064 420 8.7 10.0 12.2 15.8 22 27 35 42 50 82 84 86
l l l l l l l 12 .076 420 10.4 12.0 14.7 19.0 27 33 42 50 60 78 82 85
l l l l l l l 14 .076 421 12.1 14.0 17.1 22 31 38 49 59 70 85 88 90
l l 16 .086 421 13.9 16.0 19.6 25 36 44 57 67 80 83 86 88
l l l l l l l 18 .076 422 15.6 18.0 22 28 40 49 64 75 90 81 84 86
l l 20 .081 422 17.3 20 24 32 45 55 71 84 100 75 78 80
l l l l l l l 22 .076 625 19.1 22 27 35 49 60 78 92 110 70 72 75
l l l l l l l 26 .086 625 23 26 32 41 58 71 92 109 130 73 74 77
Maximum operating pressure depends on material and application. Call for specific recommendations.
Hydraulic atomizing spray nozzles are used to simulate sea level flight conditions for aircraft testing.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E5
Fin
e Sp
ray
no
zzle
S
Hydraulic Atomizing Spray Nozzles, Standard Spray
Material MaterialCode
Nozzle Type
LN LNN LND LNND N NN M
Brass (none) l l l l l l l
303 Stainless Steel SS l l l l l l l
316 Stainless Steel 316SS l l l l l
Polyvinyl Chloride PVC l l
Other materials available upon request.
Dimensions and Weights Materials
Standard NozzleType
Length(in.)
BodyHex.(in.)
CapHex.(in.)
NetWeight
(oz.)
LN(F) 1-15/16 13/16 11/16 3-1/4
LNN(M) 2-1/8 13/16 11/16 3-1/4
LND(F) 1-7/8 13/16 dia. 11/16 2-3/4
LNND(M) 2-1/32 13/16 dia. 11/16 2-3/4
N(F) 1-5/16 11/16 11/16 1-1/2
NN(M) 1-13/32 11/16 11/16 1-1/2
M(M) 27/32 9/16 – 1/2
Based on largest/heaviest version of each type.
Hydraulic atomizing spray nozzles are used for moistening bread dough on a conveyor.
Ordering Info
Standard Spray nozzle
1/4 ln – SS 8l l l l
InletConn.
NozzleType
MaterialCode
CapacitySize
BSPT connections require the addition of a “B” prior to the inlet connection.
To order M with strainer, use ML as Nozzle Type.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E6
Fin
e S
pr
ay
No
zz
le
s
TN-SSTC
High pressure tungsten carbide orifice spray tip
A typical UniJet assembly with TN tip will consist of a T female body or TT male body, screen strainer, spray tip and tip retainer. A typical UniJet assembly with TN-SSTC tip will consist of a high pressure UniJet female body, gasket, screen strainer, tip gasket, spray tip and high pressure tip retainer.
Fine/hollow cone spray tip
TN
UniJet Spray TipsUniJet Bodies
• T female or TT male inlet connections
Spray Nozzles, Standard Spray
• Very fine atomized sprays in a hollow cone spray pattern using liquid pressure alone – compressed air not required.
Features and Benefits
– Nozzle body, strainer, spray tip, tip retainer.
– High pressure body, gasket, screen strainer, tip gasket, spray tip, high pressure tip retainer.
• Orifice inserts, cores and strainers are easily removed for inspection or cleaning.
• Large choice of interchangeable spray tips, body types/sizes and materials.
• UniJet nozzle options:
• Uniform distribution over a wide range of flow rates and pressures.
• Very small drops often achieving misting performance.
• Lower cost – nozzle body can be reused – only spray tips are replaced.
• TN provides extra fine atomization at relatively low pressures and capacities.
• See page E2 for optimization tips.
Optimization Tips
• Evaporative cooling
• Gas cooling
• Humidifying
Applications
• Misting
• MoisteningHigh pressure tip retainer
Tip gasket
Gasket
Spray tip
Screen strainer
TT male body
T female body or
Tip retainer
High pressure UniJet female body
Screen strainer
Spray tip
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E7
Fin
e Sp
ray
no
zzle
S
Spray Nozzles, Standard Spray
Performance Data
*At the stated pressure in psi.
BodyInlet
Conn.(in.)
CapacitySize
OrificeDia.
Nom.(in.)
CoreNo.
Capacity(gallons per hour)*
SprayAngle
(°)*
30 40 60 100 200 300 500 700 1000 40 80 300
1/4
.30 .016 106 – – – – – .82 1.1 1.3 1.5 – – 51
.40 .016 108 – – – – – 1.1 1.4 1.7 2.0 – – 58
.60 .016 206 – – – .95 1.3 1.6 2.1 2.5 3.0 – 35 65
1 .020 210 – 1.0 1.2 1.6 2.2 2.7 3.5 4.2 5.0 45 62 72
1.5 .020 216 1.3 1.5 1.8 2.4 3.4 4.1 5.3 6.3 7.5 65 70 72
2 .028 216 1.7 2.0 2.4 3.2 4.5 5.5 7.1 8.4 10.0 70 75 77
3 .028 220 2.6 3.0 3.7 4.7 6.7 8.2 10.6 12.5 15.0 65 70 73
4 .042 220 3.5 4.0 4.9 6.3 8.9 11.0 14.1 16.7 20 72 81 84
6 .042 225 5.2 6.0 7.3 9.5 13.4 16.4 21 25 30 73 79 81
8 .060 225 6.9 8.0 9.8 12.6 17.9 22 28 33 40 85 89 91
10 .064 420 8.7 10.0 12.2 15.8 22 27 35 42 50 82 84 86
12 .076 420 10.4 12.0 14.7 19.0 27 33 42 50 60 78 82 85
14 .076 421 12.1 14.0 17.1 22 31 38 49 59 70 85 88 90
18 .076 422 15.6 18.0 22 28 40 49 64 75 90 81 84 86
22 .076 625 19.1 22 27 35 49 60 78 92 110 70 72 75
26 .086 625 23 26 32 41 58 71 92 109 130 73 74 77
Other body types may be available. Contact representative for further information.
TN
Dimensions and Weights
Standard NozzleType
Length(in.)
Hex.(in.)
NetWeight
(oz.)
T+TN 1-31/32 13/16 2-1/2
TT+TN 1-31/32 13/16 2-1/4
T+TN-SSTC 1-31/32 13/16 2-1/2
TT+TN-SSTC 1-31/32 13/16 2-1/4
Based on largest/heaviest version of each type.
UniJet Complete nozzle
nozzle Body Spray tip
1/4 t – SS + tn – SS 10l l l l l l
InletConn.
BodyType
MaterialCode
TipType
MaterialCode
CapacitySize
nozzle Body Spray tip
1/4 tt – SS + tn – SStC 10l l l l I l
InletConn.
BodyType
MaterialCode
TipType
MaterialCode
CapacitySize
Ordering Info
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E8
Fin
e S
pr
ay
No
zz
le
s
*At the stated pressure in psi.
BodyInlet
Conn.(in.)
CapacitySize
OrificeDia.
Nom.(in.)
Capacity(gallons per hour)*
ApproximateSpray Pattern Dia.(at 1 foot distance)
(in.)400 750 1000 1500 2000
1/4
.60 .016 1.9 2.6 3.0 3.7 4.2 3
.80 .014 2.5 3.5 4.0 4.9 5.7 3
.90 .016 2.8 3.9 4.5 5.5 6.4 3
1 .020 3.2 4.3 5.0 6.1 7.1 3-1/2
1.5 .020 4.7 6.5 7.5 9.2 10.6 3-1/2
1.8 .025 5.7 7.8 9.0 11.0 12.7 4-1/2
2 .028 6.3 8.7 10.0 12.2 14.1 4-1/2
3 .028 9.5 13.0 15.0 18.4 21 6
4 .042 12.6 17.3 20 24 28 8
6 .042 19.0 26 30 37 42 10
8 .060 25 35 40 49 57 12
9 .060 28 39 45 55 64 14
10 .064 32 43 50 61 71 16
12 .076 38 52 60 73 85 18
14 .076 44 61 70 86 99 14
15 .081 47 65 75 92 106 16
16 .086 51 69 80 98 113 18
18 .076 57 78 90 110 127 16
20 .081 63 87 100 122 141 18
22 .076 70 95 110 135 156 12
24 .081 76 104 120 147 170 13
26 .086 82 113 130 159 184 14
Performance Data
Spray Nozzles, Standard Spray
TN-SSTC
Spray pattern diameter is based on liquid with viscosity of 20 seconds #3 Zahn Cup spraying at 1600 psi (110 bar).
Coverage will vary with viscosities and pressures. Tabulated capacities are based on water.
Other body types may be available. Contact representative for further information.
– Adjustable ball fittings
– Check valves
– Pressure gauges
– Pressure regulators
– Pressure relief valves
See Also http://
– Shut-off valves
– Solenoid valves
– Split-eyelet bodies
– Strainers
• AccessoriesMaterial Material
Code
Spray Tip
TN TN-SSTC
Brass (none) l
303 Stainless Steel SS l l
Other materials available upon request.
Materials
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E9
Fin
e Sp
ray
no
zzle
S
• Very fine atomized sprays in a hollow cone spray pattern using liquid pressure alone – compressed air not required.
• Uniform distribution over a wide range of flow rates and pressures.
• Very small drops often achieving misting performance.
• Orifice inserts, cores and strainers are easily removed for inspection or cleaning.
Features and Benefits
Hydraulic Atomizing Spray Nozzles, Wide Angle Spray
• Air atomizing nozzles
See Also http://
Applications
LNN-W Optimization Tips
Integral strainer1/4" NPT or BSPT (M)
• See page E2 for optimization tips.
N-W
LN-W
NN-W
1/4" NPT or BSPT (M)
• Evaporative cooling
• Humidifying
• Moistening
1/4" NPT or BSPT (F)
Integral strainer1/4" NPT or BSPT (F)
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E10
Fin
e S
pr
ay
No
zz
le
s
Hydraulic Atomizing Spray Nozzles, Wide Angle Spray
Material MaterialCode
Nozzle Type
LN-W LNN-W N-W NN-W
Brass (none) l l l l
303 Stainless Steel SS l l l l
316 Stainless Steel 316SS l l l l
Other materials available upon request.
Materials
Dimensions and Weights
Standard NozzleType
Length(in.)
BodyHex.(in.)
CapHex.(in.)
NetWeight
(oz.)
LN-W(F) 1-15/16 13/16 11/16 3-1/4
LNN-W(M) 2-1/8 13/16 11/16 3-1/4
N-W(F) 1-5/16 11/16 11/16 1-1/2
NN-W(M) 1-13/32 11/16 11/16 1-1/2
Based on largest/heaviest version of each type.
Ordering Info
Standard Spray nozzle
1/4 ln – SS 8Wl l l l
InletConn.
NozzleType
MaterialCode
CapacitySize
BSPT connections require the addition of a “B” prior to the inlet connection.
Performance Data
*At the stated pressure in psi.
InletConn.(in.)
CapacitySize
OrificeDia.
Nom.(in.)
CoreNo.
Capacity(gallons per hour)*
SprayAngle
(°)*
20 30 40 80 40 80
1/4
2W .039 210 – 1.7 2.0 2.8 – 165
3W .039 216 2.1 2.6 3.0 4.2 – 157
4W .060 220 2.8 3.5 4.0 5.7 156 155
8W .060 225 5.7 6.9 8.0 11.3 152 153
Hydraulic atomizing spray nozzles are used in cooling off coils in roof-mounted air conditioning units.
LN-W, LNN-W, N-W, NN-W
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E11
Fin
e Sp
ray
no
zzle
S
• Nozzle assembly includes a nozzle body and seven removable caps. Each cap has an internal core or vane which is easily removed for cleaning.
• Very fine atomized sprays in a shower-like full cone pattern.
• Wide range of flow capacities available.
Features and Benefits
Spray Nozzles, Wide Angle Spray
Standard Spray nozzle
1-1/2 – 7G – SS 30l l l l
InletConn.
NozzleType
MaterialCode
CapacitySize
Ordering Info
BSPT connections require the addition of a “B” prior to the inlet connection.
Strainer
1 tW – SS 100l l l
StrainerNo.
MaterialCode
MeshSize
Dimensions and Weights
Standard NozzleType
InletConn.(in.)
Length(in.)
Dia.(in.)
NetWeight
(oz.)
7N(F) 1 2-3/32 2-1/2 24
7G(F)
3/41
1-1/2
1-13/163-5/163-3/16
2-1/84-1/164-1/4
125660
Based on largest/heaviest version of each type.
7G
3/4" to 1-1/2" NPT or BSPT (F)Optional strainer – TW strainer
mesh sizes 24, 50, 100, 200
1" NPT or BSPT (F)Optional strainer – TW strainer
mesh sizes 24, 50, 100, 200
7N
Materials
Material MaterialCode
Nozzle Type
7N 7G
Brass (none) l l
303 Stainless Steel SS l l
316 Stainless Steel 316SS l l
Other materials available upon request.
• Dust control
• Fire suppression/prevention
• Gas scrubbing, cooling
• Tank rinsing
Applications
Optimization Tips
• See page E2 for optimization tips.
See Also http://
• Air atomizing nozzles
• Strainer Catalog
• Accessories
– TW strainer
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E12
Fin
e S
pr
ay
No
zz
le
s Performance Data
Spray Nozzles, Wide Angle Spray
7G
7N *At the stated pressure in psi.
InletConn.(in.)
CapacitySize
Dimensions Capacity(gallons per minute)*
A(ft.)
B(ft.)
C(ft.) 20 40 60 80 100 125 150
1
.60 3† 3-1/2 1-1/2 – – – – .11 .12 .14
1 3† 4 2 – .12 .14 .16 .18 .21 .23
1.5 3† 4-1/2 2-1/2 – .17 .21 .25 .28 .31 .34
2 3† 4-1/2 2-1/2 – .23 .29 .33 .37 .41 .45
3 3† 5-1/2 3-1/2 .25 .35 .43 .50 .55 .62 .68
4 3† 5-1/2 3-1/2 .33 .47 .57 .66 .74 .83 .90
6 3† 6 4 .50 .70 .86 .98 1.1 1.2 1.4
8 3† 6 4 .66 .93 1.1 1.3 1.5 1.7 1.8
10 3† 7 4-1/2 .83 1.2 1.4 1.7 1.8 2.1 2.3
12 3† 8 4-1/2 1.0 1.4 1.7 2.0 2.2 2.5 2.7
14 3 8 4-1/2 1.2 1.6 2.0 2.3 2.6 2.9 3.2
16 37†
87-1/2
55-1/2 1.3 1.9 2.3 2.6 3.0 3.3 3.6
18 37†
89
56 1.5 2.1 2.6 3.0 3.3 3.7 4.1
22 37†
9-1/211
5-1/27 1.8 2.6 3.2 3.6 4.1 4.5 5.0
26 37†
1012
68 2.1 3.0 3.7 4.3 4.8 5.4 5.9
†And higher.
*At the stated pressure in psi.
InletConn.(in.)
CapacitySize
Dimensions Capacity(gallons per minute)*
A(ft.)
B(ft.)
C(ft.) 20 40 60 80 100 125 150
3/4
1
35811
56-1/27-1/2
8
3-1/44-1/44-3/45-1/4
.98 1.3 1.6 1.8 2.1 2.3 2.5
1.5
35811
8910
10-1/2
5-1/26-1/27-1/27-3/4
1.5 2.0 2.4 2.8 3.1 3.4 3.7
3
35811
8-1/21011
11-1/2
5-1/26-1/2
77-1/2
2.9 4.0 4.8 5.5 6.2 6.8 7.4
5
35811
9-1/21112
12-1/2
6-1/47
7-3/48
4.8 6.7 8.1 9.2 10.3 11.3 12.4
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E13
Fin
e Sp
ray
no
zzle
S
Spray Nozzles, Wide Angle Spray
7G
Performance Data
A BC
*At the stated pressure in psi.
InletConn.(in.)
CapacitySize
Dimensions Capacity(gallons per minute)*
A(ft.)
B(ft.)
C(ft.) 20 40 60 80 100 125 150
1
6.5
35811
1011-1/2
1313-1/2
99-1/4
1011-1/2
6.2 9.1 10.5 11.9 13.3 14.5 16.1
10
35811
1112-1/213-1/2
14
9-1/2101112
9.8 13.5 16.4 18.9 21 23 25
12.5
35811
1213-1/4
1414-1/2
101112
12-1/2
12.0 17.0 20 23 25 28 30
16
35811
12-1/213-3/414-1/2
15
10-1/21213
13-1/4
15.4 22 26 30 33 37 40
1, 1-1/2
25
35811
13-3/41617
17-1/2
910-1/2
1111-1/2
24 34 41 47 52 57 62
30
35811
13-3/41617
17-1/2
910-1/2
1111-1/2
29 40 48 55 62 68 74
32
35811
13-3/41617
17-1/2
910-1/2
1111-1/2
31 43 52 59 66 74 79
40
35811
13-3/41617
17-1/2
910-1/2
1111-1/2
39 53 64 74 83 92 100
1, 1-1/2
45
35811
1416-1/217-1/2
18
9-1/21112
12-1/2
44 60 72 82 91 100 110
50
35811
14-1/2171819
10-1/212
13-1/214
48 67 81 92 103 113 124
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E14
Fin
e S
pr
ay
No
zz
le
s
• Misting of produce to preserve freshness and storage life
• Wetting without excess moisture
Applications
22624, SF
22624 brass tip body and core, stainless steel core tip
SF all brass
1/8SF-CE, SM-CE
1/8" NPT or BSPT (M)
UniJet Spray Tips
• Air atomizing nozzles
See Also http://Optimization Tips
• See page E2 for optimization tips.
• Finely atomized sprays in a hollow cone misting-type spray pattern using liquid pressure alone – compressed air not required.
• Uniform distribution over a wide range of flow rates and pressures.
• Very small drops often achieving misting performance – ideal for applications where wetting is needed without excess moisture.
• 22624-80° SF Fogger spray tips for UniJet® nozzle bodies are available with a brass tip body and core, stainless steel core tip; SF spray tips are all brass.
Features and Benefits
– Minimal buildup.
– Increased chemical resistance for longer wear life.
– Lower maintenance.
– Removable stainless steel 200 mesh screen.
– Up to 110° spray angle at 40 psi (2.8 bar) – maximum pressure of 200 psi (14 bar) at maximum temperature of 200°F (93°C).
• SF-CE and SM-CE spray nozzles made of Celcon® feature:
Performance Data
*At the stated pressure in psi.
FoggerNozzle No.
FoggerTip No.
Capacity(gallons per hour)*
SprayAngle
(°)*
20 40 100 150 200 40 100 200
1/8SF-CE1 – .45 .63 1.0 1.2 1.4 110 110 100
1/8SF-CE2 SF2, SF-CE2 .90 1.3 2.0 2.4 2.8 105 105 100
1/8SF-CE3 SF3, SF-CE3 1.3 1.9 3.0 3.7 4.2 110 110 100
1/8SM-CE1 SM-CE1,22624-1-80 .71 1.0 1.6 1.9 2.2 80 75 75
1/8SM-CE2 SM-CE2,22624-2-80 1.4 2.0 3.2 3.9 4.5 80 75 75
UniJet Complete nozzle
nozzle Body Spray tip
1/4 t + 22624 – 1 – 80l l l l l
InletConn.
BodyType
TipType
CapacitySize
SprayAngle
UniJet Complete nozzle
nozzle Body Spray tip
1/4 t + SF 2l l l l
InletConn.
BodyType
TipType
CapacitySize
Ordering Info
Complete Fogger nozzle
1/8 SF – Ce2l l l
InletConn.
NozzleType
CapacitySize
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Dimensions and Weights
Standard NozzleType
Length(in.)
Hex.(in.)
NetWeight
(oz.)
T+22624, TT+22624,T+SF, TT+SF 1-7/8 13/16 2-1/2
1/8SF-CE,1/8SM-CE 1-3/8 7/16 .08
Hydraulic Fogging Spray Nozzles, Wide Angle Spray
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E15
Fin
e Sp
ray
no
zzle
S
• Fogging spray in dense hollow cone pattern using liquid pressure alone – compressed air not required.
• Small-sized drops.
• Uniform distribution at large flow rates.
• Two-piece assembly option with adapter to provide a female hose thread connection.
Features and Benefits
Spray Nozzles, Narrow Angle Spray
Performance Data
http://
• Air atomizing nozzles
See Also
F
Two-piece with hose thread adapter
FF
One-piece3/4" to 1-1/4" NPT or BSPT (F)
1" to 11-1/2", 1-1/2" to 9", 1-1/2" to 11-1/2" hose thread (F)
• Aerating
• Chemical processing
Applications
• Dust control
• Fire suppression/prevention
• See page E2 for optimization tips.
Optimization Tips
*At the stated pressure in psi.
InletConn.(in.)
HoseThread
Pitchof
HoseThread
NozzleType Capacity
Size
Capacity(gallons per minute)*
F FF 20 40 60 80 100 150
3/4
l 4.8 3.4 4.8 5.9 6.8 7.6 9.3
l 9 6.4 9.0 11.0 12.7 14.2 17.4
l 12 8.5 12.0 14.7 17.0 19.0 23
l 18 12.7 18.0 22 25 28 35
1 11-1/2† l 18 12.7 18.0 22 25 28 35
1l 25 17.7 25 31 35 40 48
l 35 25 35 43 49 55 68
1-1/4l 50 35 50 61 71 79 97
l 70 49 70 86 99 111 136
1-1/2
9 l 35 25 35 43 49 55 68
11-1/2† l 35 25 35 43 49 55 68
9 l 50 35 50 61 71 79 97
11-1/2† l 50 35 50 61 71 79 97
9 l 70 49 70 86 99 111 136
11-1/2† l 70 49 70 86 99 111 136
†May also be used with corresponding tapered pipe thread connections.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
E16
Fin
e S
pr
ay
No
zz
le
s
Spray Nozzles, Narrow Angle Spray
*At the stated pressure in psi.
CapacitySize
“H”HeightAboveFloor(ft.)
Spray Coverages “D”at Various Pressures (ft.)*
40 60 100 150
4.8, 9, 12
3 2 2 2 2
5 3 3 3 2-1/2
7 4 4 3-1/2 3
10 5 4-1/2 4 3-1/2
18, 25
3 2 2 2 2
5 3 3 3 2-1/2
7 4 4 3-1/2 3
10 5-1/2 5 4-1/4 4
35, 50, 70
3 2-1/2 2-1/2 2-1/2 2
5 4 4 3-1/2 3
7 5 5 4-1/2 4
10 6-1/2 6 5-1/2 5
*At the stated pressure in psi.
CapacitySize
“H”HeightAboveFloor(ft.)
Spray Dimensions and Coverages (ft.)*
40 100
A B† C A B† C
4.8 3 17 7 13 25 5 20
9 3 23 8 17 31 5.5 24
12 3 25 8 18 33 5.5 25
18 3 29 8 19 36 5.5 26
25 3 32 8 24 42 5.5 32
35 3 36 8 28 55 6 45
50 3 37 8 28 60 6 50
70 3 46 8 36 72 6 60
†B dimension is taken at widest portion of A.
Dimensions and Weights
Narrow Angle
NozzleType
InletConn.(in.)
HoseThread
OverallLength
(in.)
Dia.(in.)
NetWeight
(oz.)
F(F)
– 1 4-9/32 1-1/2 12
– 1-1/2 5-13/16 2-1/4 28
FF(F)
3/4 – 1 1-3/8 3
1 – 1-5/32 1-21/32 5
1-1/4 – 1-7/32 2-3/32 8
Based on largest/heaviest version of each type.
Material MaterialCode
Nozzle Type
FF 1 to 11-1/2F-18 1-1/2-xx-F-xx
Brass (none) l
303 Stainless Steel SS l
Nickel-Plated Brass (none) l
Nickel-Plated Brass Capwith Plated Cast Iron Body (none) l
Other materials available upon request.
Materials
Standard Spray nozzle
1 – 11-1/2 F – 18l l l l
HoseThread
Pitch ofHose Thread
NozzleType
CapacitySize
Standard Spray nozzle
3/4 FF – SS 4.8l l l l
InletConn.
NozzleType
MaterialCode
CapacitySize
Ordering Info
BSPT connections require the addition of a “B” prior to the inlet connection.
Performance Data
F, FF F, FF
B
CA
30
H
D
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]