Professional HVLP Gravity Feed Spray GunThe material savings with this HVLP is upwards of 30% due to high transfer efficiency and low over spray. Easy handling and easy maintenance, fluid nozzle is stainless steel, air cap and gun head are chrome plated brass. The gun outlet pressure is less than 10 psi with a high transfer efficiency of over 65%. Specially designed air passage provides a very fine and even particle distribution. Image Shown: 2304-PV
Maximum Air Pressure 43 psi
Hose Size (ID) 3/8˝
Air Inlet 1/4˝ NPT
Cup Capacity (600 cc) 20 oz.
Fluid Nozzle Orifice 055˝ (1.4 mm)
Fluid Output 8.8 oz/min
MFG Part Number DescriptionEQP 2304-PV Professional HVLP Gravity Feed Spray Gun
Gravity Feed Spray GunDie Cast aluminum alloy gun with a 2-step trigger control, self-centering chrome-molybdenum steel nozzle, spray gun adjustment, viscosity adjustable, non-bleeder type, gravity feed and external mix makes this gun the choice of the professionals. Image Shown: 2305-PV
Spray Pattern (Gravity Feed) 8˝- 10˝
Orifice Size 1.4 mm
Air Pressure 30 - 80 psi
Hose Size (ID) 3/8˝
Air Inlet 1/4˝ NPT
Fluid Output 8.8 oz/min
MFG Part Number DescriptionEQP 2305-PV Gravity Feed Spray Gun
TEKNA® QuickClean™ Spray GunExcellent for solvent and waterborne coatings. Extremely Durable. High corrosion resistance reduces paint defects. Fully coated on inside and out. Scratch resistant. Free airflow technology uses less air pressure to achieve superior atomization. High transfer efficiency for material savings. Complies with EPA Rule 40 CFR 63 HHHHHH and is approved in most HVLP areas. Outstanding finishes – from waterborne base coats to the latest high solids clears.
Contains:1.2 mm & 1.3 mm Fluid Tips
Image Shown: 703507
Needle/Nozzle 1.2 mm, 1.3 mm
Air Cap 7E7 High efficiency
Cup 900cc Aluminum
MFG Part Number DescriptionDEV 703507 TEKNA® QuickClean™ Spray Gun
Spray Gun & CupDesigned for light and medium material delivery to handle a full range of viscosity from fine surface finishes to heavy body coatings. Stainless steel fluid nozzle. Chrome plated brass end cap. Brass gun head. Brass adjustment tube. Fully adjustable spray pattern with a 1 quart spun aluminum, dripless siphon cup. Precisely machined, well balanced, light weight and longer serviceability. Non-bleeder type, siphonal feed. Die-cast aluminum alloy gun body with 2-step trigger control. Self-centering nozzle. Wide-mouth and non-drip canister with quick release clamp lid.
Image Shown: 2307-PV
Spray Pattern 8˝ - 10˝
Orifice Size 1.8 mm
Air Pressure 50 - 70
Hose Size(ID) 3/8˝
Air Inlet 1/4˝ NPT
Fluid Inlet (NPS) 3/8˝
Cup Capacity 1 qt.
Average Air Consumption @ 60 PSI 8.5 - 12 cfm
Minimum Recommended Compressor 3 - 4
Minimum Recommended Tank Size 20 - 30 gal.
MFG Part Number DescriptionEQP 2307-PV Spray Gun & Cup
G2 CARQUEST Service Lines Catalog
Detailing & Auto BodySpray Guns - Spray Gun Filters
High Pressure Professional Spray GunSelf centering stainless steel nozzle, chrome plate end cap, brass gun head and adjustment tube makes this high pressure spray gun ideal for painting results required in fine automotive or industrial type finishing. The die-cast aluminum gun body with a 2-step trigger, 1 quart spun aluminum canister with a quick release clamp lid helps make the most difficult job easier. Image Shown: 2308-PV
Spray Pattern 8˝ - 10˝
Orifice Size 1.8 mm
Hose Size (ID) 3/8˝
Air Inlet 1/4˝ NPT
Fluid Inlet (NPS) 3/8˝
Cup Capacity 1 qt
MFG Part Number DescriptionEQP 2308-PV High Pressure Professional Spray Gun
Detail & Touch-Up Spray GunNon-bleeder type. Siphonal Feed. 8 oz. spun aluminum siphon cup. Self-centering brass air nozzle. Nickel plated aluminum gun body. Thumb fluid control. Fully adjustable spray pattern. Ideal for shading and spotting. Image Shown: 2301-PV
Spray Pattern 4˝ - 6˝
Orifice Size 1.8 mm
Air Pressure 30 - 50 psi
Hose Size (ID) 3/8˝
Air Inlet 1/4˝ NPT
Fluid Inlet (NPS) 1/4˝
Cup Capacity 8 oz.
Average Air Consumption @ 60 psi 4 cfm
Minimum Recommended Compressor 1 hp
Minimum Recommended Tank Size 10 gal.
MFG Part Number DescriptionEQP 2301-PV Detail & Touch-Up Spray Gun
Dripless Spray Gun CupA 1 quart spray gun cup replacement. Rugged construction. Dependable performance. Fits most standard siphon feed spray guns. Image Shown: 2600-PV
MFG Part Number DescriptionEQP 2600-PV Dripless Spray Gun Cup
Spray Gun Cup GasketFits most standard siphon feed spray guns. Image Shown: 2601-PV
MFG Part Number DescriptionEQP 2601-PV Spray Gun Cup Gasket
Nylon Paint Cup For Gravity Feed Spray GunsA 20 oz gravity feed spray gun cup replacement. Durable, lightweight nylon construction. Fits most gravity feed spray guns. Image Shown: 2623-PV
MFG Part Number DescriptionEQP 2623-PV Nylon Paint Cup for Gravity Feed Spray Gun
Gravity Feed Spray Gun FiltersHighly effective in removing contaminants from paint. Fits most gravity feed spray guns. Use once and throw away.
Image Shown: 2620-PV
MFG Part Number DescriptionEQP 2620-PV Gravity Feed Spray Gun Filters
Spray Gun In-Line Air FiltersFilters trap moisture, rust, scale and oil aerosols that pass through conventional filters. Install at or close to the spray gun for the final filtration for perfectly clean air. Air inlet/outlet - 1/4˝ NPT. Image Shown: 2640-PV
MFG Part Number DescriptionEQP 2640-PV Spray Gun In-Line Air Filters
G3CARQUEST Service Lines Catalog
Detailing & Auto Body Spray Gun Air Adjusting Valves & Regulators - Pneumatic Power Tools
Air Adjusting ValvesHas 1 precisioned tapered valve that will open and close in approximately 4 turns. The easy to handle knob makes the valve infinitely adjustable. The air inlet is 1/4˝ NPTM and the outlet is 1/4˝ NPTF (swivel nut). Image Shown: 2641-PV
MFG Part Number DescriptionEQP 2641-PV Air Adjusting Valve
EQP 2642-PV Air Adjusting Valve with Gauge
Air Adjusting Valve With DiaphragmIncludes a pressure gauge that reads up to 160 psi and has a full diaphragm regulation for constant, exact pressure. The air inlet is 1/4˝ NPTM and the outlet is 1/4˝ NPTF (swivel nut). Fits all leading spray guns. Image Shown: 2644-PV
MFG Part Number DescriptionEQP 2644-PV Air Adjusting Valve with Diaphragm
High Volume Air Adjusting Valve With GaugeHigh volume air adjusting valve designed especially for HVLP spray guns. Includes a pressure gauge that reads up to 160 psi. The air inlet is 1/4˝ NPTM and the outlet is 1/4˝ NPTF (swivel nut). Fits all leading spray guns.
Image Shown: 2643-PV
MFG Part Number DescriptionEQP 2643-PV High Volume Air Adjusting Valve with Gauge
Spray Gun Cleaning KitDesigned to clean paint residue and sludge from all spray guns, keeping them in maximum working condition. Safe to use with chemicals and solvents. Specifically designed for high volume low pressure (HVLP) guns. Image Shown: 2621-PV
MFG Part Number DescriptionEQP 2621-PV Spray Gun Cleaning Kit
Nylon StrainerNylon mesh, lint-free strainers are guaranteed to be free of loose fibers or threads. Designed for basecoat and clearcoat finishes, but provides superior straining for all paints, including waterborne.
Image Shown: 15001
MFG Part Number DescriptionCPB 15001 Nylon Strainer, Medium
CPB 15003 Nylon Strainer, Fine
CPB 15005 Nylon Strainer, Extra-Fine
Portable WorkbenchesThese sturdy benches provide a portable workbench for sanding, welding, refinishing and a wide variety of shop procedures. The strong tubular frame is galvanized for long life. Thick foam padding provides a soft protective work surface. Folds for easy storage. Image Shown: 1950PV
MFG Part Number DescriptionEQP 1950PV Portable Workbench, 250 lbs. Capacity
EQP 1951PV Portable Workbench, 500 lbs. Capacity
Dual Action Quiet Air SanderOrbital motion. All new cross bolt-style hub mounting. All steel balance minimizes vibration while blending and smoothing filler, feather edging and pre-paint preparation. 6˝ sander. Includes sanding pad. Image Shown: 2310-PV
Free Speed 10,000 rpm
Air Pressure 90 psi
Hose Size (ID) 3/8˝
Air Inlet 1/4˝ NPT
Pad Size 6˝
Motor 1/2 hp
Air Consumption 5 cfm
Balancer Steel/Cross Bolt Style
Minimum Recommended Compressor 4 to 5 hp
Minimum Recommended Tank Size 60 gal.
MFG Part Number DescriptionEQP 2310-PV Dual Action Quiet Air Sander
G4 CARQUEST Service Lines Catalog
Detailing & Auto BodyAir Sanders
Chicago Pneumatic® Dual Action Sander• Generaldutysanderwithrotaryor random orbital options• PSAsandingpad• Insulatedgripandlockoffthrottleto prevent accidental start ups• Powerregulatorforprecisecontrol• Operatorcomfort• Excellentforblendingandsmoothing filler, feather edging and pre-paint preparation
Image Shown: CP870
Free Speed 10,000 rpm
Pad Size 6˝
Spindle Thread 5/8˝-11
Average Air Consumption 8 cfm
Air Consumption at Load 18 cfm
Height 4.7˝
Length 10˝
Weight 4.25 lbs.
Pad Type PSA
Air Inlet 1/4˝ NPTF
MFG Part Number DescriptionCP CP870 Chicago Pneumatic® Dual Action Sander
6˝ Palm Grip Vacuum SanderThis is a 3-in-1, 6˝ palm grip dustless sander. You can use it as a standard sander (non dustless), or connect it to a shop vac, or a central vacuum pick up system. The lightweight durable composite construction makes it extremely comfortable to use. Image Shown: 7455
Pad Size 6˝
Free Speed 9,000 rpm
Net Weight 1.49 lbs.
Minimum Hose Size 3/8˝
MFG Part Number DescriptionEQP 7455 6˝ Palm Grip Vacuum Sander
Orbital Sander Image Shown: 24-606G
Stroke 5 mm / 10,000 rpm
Air Consumption 6.2L/sec
Weight 1.87 lb (850 g)
MFG Part Number DescriptionARL 24-606G 6" Random Orbital Sander
Orbital Sander Image Shown: 24-605G
Stroke 5 mm / 10,000 rpm
Air Consumption 6.2L/sec
Weight 1.87 lb (850 g)
MFG Part Number DescriptionARL 24-605G 5" Random Orbital Sander
Chicago Pneumatic® 6˝ Orbital Palm Sanders• 3/16˝(5mm)orbits• Powerful0.2hp(160W)motor• Softgrip,teardropdesignforperfectcontrol• Lownoiselevel• Lowvibration<2.5m/s• Non-vacuum(NV),centralvacuum(CV),orselfvacuum(SV)models in Hook & Loop(H&L) or PSA pad• Shutoffandspeedcontrolswitch• Operatorcomfortwithergonomicpalmshape• Productivityincreasedwithlowvibrationlevel• Powerfulandergonomicpalmshapeforverticaland horizontal applications• 3/16˝(5mm):greatforsurfacepreparationfrombodyfillerto paint primer
Free Speed 12,000 rpm
Pad Size 6˝
Spindle Thread 5/16˝ - 24
Average Air Consumption 8 cfm
Air Consumption at Load 16 cfm
Height 4.1˝
Length 7.3˝
Weight 1.74 lbs.
Pad Type PSA
Air Inlet 1/4˝ NPTF
MFG Part Number DescriptionCP CP7255 Chicago Pneumatic® 6˝ Orbital Palm Sanders
G5CARQUEST Service Lines Catalog
Detailing & Auto Body Air Sanders - Orbital Back-Up Pads
High Speed SanderBuilt-in regulator. Variable throttle. Precise speed control for paint removal, shaping, filler, patches, weld smoothing, and rust removal. Comes complete with three backing pads. Image Shown: 2365-PV
Variable Speed 2,000-18,000 rpm
Air Pressure 90 psi
Hose Size 3/8˝ ID
Air Inlet 1/4˝ NPT
Pad Size 3˝, 4-1/2˝, & 5˝
Motor 1/2 hp
Average Air Consumption 6 - 8 cfm
Min. Recommended Compressor 4 hp
Min. Recommended Tank Size 40 - 60 gal.
MFG Part Number DescriptionEQP 2365-PV High Speed Sander
High Speed Sanding SetUsed for all 5˝ high speed sanders with a maximum rated speed of 20,000 rpm. The set has 3 different padsizestohelpwithanyjob:3˝,4-1/2˝ and 5 1/2˝. Image Shown: 2525-PV
MFG Part Number DescriptionEQP 2525-PV High Speed Sanding Set
Deluxe Phenolic Sanding PadUsed for all electric and air sanders and polishers. Features a 5/8˝-11 female integral thread to accept all 5/8˝-11 spindles. 7˝ sander. Image Shown: 2526-PV
MFG Part Number DescriptionEQP 2526-PV Deluxe Phenolic Sanding Pad
Dual Action Sanding PadOne-piece vinyl bonded (no rivets) pad. Used for all dual-action sanders. The 6˝, "flex" pad is ideal for sanding and feathering painted surfaces. Image Shown: 2527-PV
MFG Part Number DescriptionEQP 2527-PV Dual Action Sanding Pad
Body Finishing AssortmentEverything that you need to replace on your body finishing equipment, all in one easy to order part number.Contains:1 - 2525-PV 3˝, 4-1/2˝, 5˝ Pad Assemblies1 - 2526-PV 7˝ Deluxe Phenolic Pad1 - 2527-PV 6˝ Dual Action Sanding Pad1 - 2620-PV Filter Kit for Gravity Feed Gun1 - 2621-PV Spray Gun Cleaning Kit1 - 2640-PV Spray Gun In-Line Air Filters
Image Shown: 2650-PV
MFG Part Number DescriptionEQP 2650-PV Body Finishing Assortment
Molded Sanding PadThis 8˝ diameter medium urethane molded sanding pad is firm enough for flat surfaces, yet soft enough for curved surfaces. PSA facing. Thread size is 5/8˝-11. Maximum RPM rating is 4,800. Image Shown: 15016
MFG Part Number DescriptionCPB 15016 Molded Sanding Pad
Backing PlateThis 5˝ diameter reinforced phenolic backing plate features a 7/8˝ depressed centering hole. Maximum RPM rating is 6,000. Image Shown: 15018
MFG Part Number DescriptionCPB 15018 Backing Plate
Molded Palm SanderThese urethane molded palm sanders fit comfortably in your hand. The rectangular sander measures 3˝ x 5˝. Both feature a PSA facing.
Image Shown: 15010
MFG Part Number DescriptionCPB 15010 Molded Palm Sander, Rectangular
CPB 15011 Molded Palm Sander, Round
G6 CARQUEST Service Lines Catalog
Detailing & Auto BodyAir Sanders
Image Shown: 7474
Dual Piston In-Line SanderThis dual piston in-line sander features a four (4) cylinder driving system of opposed, double-acting pistons. It is also capable of more than 3,300 one-inch strokes per minute. Because the dual pistons are constantly working in alternate opposition to one another, there is no dead center. This gives it unparalleled power on the job and fatigue proof smoothness.
Stroke 1˝
Strokes Per Minute 3,000
Air Pressure 90 psi
Hose Size 3/8˝
Air Inlet 1/4˝ NPT
Paper Size 2-3/4˝ x 17-1/2˝
Air Consumption 6 - 8 cfm
Min. Recommended Compressor 3 - 4 hp
Min. Recommended Tank Size 40 gal.
MFG Part Number DescriptionEQP 7474 Dual Piston In-Line Sander
Image Shown: CP7268
Chicago Pneumatic® Heavy-Duty Dual Piston Straight Line Sander• Twinpistonruggeddesign.• CPpinchguard.• Easycomforttriggerandhandle.• Operatorcomfortandsafeoperation.• Idealforfastmaterialremoval,bodysmoothing,andfor large surfaces.
Free Speed 5,000 rpm
Paper Belt Size 2.75˝ x 17.5˝
Average Air Consumption 8.5 cfm
Air Consumption At Load 10.7 cfm
Length 16.5˝
Weight 6.06 lbs.
Air Inlet 1/4˝ NPTF
MFG Part Number DescriptionCP CP7268 Chicago Pneumatic® Heavy-Duty Dual Piston
Straight Line Sander
Inline Sander PadIdeal for smoothing body filler or shaping and leveling large flat surfaces.
Image Shown: 2010-PV
MFG Part Number DescriptionEQP 2010-PV Inline Sander Pad
Steel Wool PadsPerfect for removing old paint, shellac, varnish and lacquer. Helps you clean heavy machinery, engines, stove surfaces and rough metals. Image Shown: 25-790
MFG Part Number DescriptionSAR 25-790 Grade 0, Fine, 16 Pads
SAR 25-791 Grade 00, Very Fine, 16 Pads
SAR 25-792 Grade 000, Extra Fine, 16 Pads
SAR 25-793 Grade 0000, Super Fine, 16 Pads
SAR 25-787 Grade 3, Coarse, 16 Pads
Tack ClothsAvailable in gold or surgical blue. Contains no oils, solvents or materials that may affect surface adhesion. For base coat and clear coat finishes. 18˝ x 36˝. Image Shown: 15040
MFG Part Number DescriptionCPB 15040 Tack Cloth, Gold, High Tack
CPB 15041 Tack Cloth, Surgical Blue, Medium Tack
Plastic SpreadersFor smooth spreading of body filler, putty or grout. Easy clean non-stick finish. Box of 100. Image Shown: 15025
MFG Part Number DescriptionCPB 15025 Plastic Spreader, 3˝ x 4˝, Box of 100
CPB 15026 Plastic Spreader, 3˝ x 5˝, Box of 100
CPB 15027 Plastic Spreader, 3˝ x 6˝, Box of 100
G7CARQUEST Service Lines Catalog
Detailing & Auto Body Coveralls - Carpet Protector Film
Paint Suit CoverallsWith hood, zippered front, elastic wrists and ankles. Made of light weight polypropylene spunbonded non-woven fabric. This material was developed with the comfort of the worker in mind. It also provides limited chemical hazard protective barrier that will keep liquid splashes, paint and dirt particles out, yet still allow air to pass through. Image Shown: 15050
MFG Part Number DescriptionCPB 15050 Paint Suit Coveralls W/Hood Large
CPB 15051 Paint Suit Coveralls W/Hood X-Large
CPB 15052 Paint Suit Coveralls W/Hood XX-Large
Spray SockCool, comfortable hood type spray sock fits snugly over the head. Three way stretch material, can be positioned to expose eyes, eyes and nose or eyes, nose and mouth. One size fits all. Protects head during painting. Each display unit contains 12 socks. Image Shown: 15009
MFG Part Number DescriptionCPB 15009 Spray Sock
Carpet Protector FilmCarpet Protector Film protects freshly dyed or cleaned carpets in the vehicles. Features high tack adhesive. Film is 3-mil thick, transparent and is perforated every 21˝ for easy tear off. All film is printed “Dealer Must Remove Protective Cover”. Image Shown: 85-781
MFG Part Number DescriptionSAR 85-781 Carpet Protector Film, 24˝ x 200´
SAR 85-782 Carpet Protector Film, 24˝ x 500´
Plastic Floor MatsSlip-N-Grip® floor mats keep the customers´ carpets clean without bunching up under brake and accelerator pedals. Technicians never waste time shifting them back in place. Ordinary floor mats rarely give more than superficial protection against dirt, grease and grime. Slip-N-Grip® floor mats form a complete plastic barrier. Chemicals will not soak through and they will not fall apart when they get wet. The CARQUEST logo is printed on each floor mat. Each floor mat is 21˝ x 16-1/2˝. Box of 250.
Image Shown: 15111
MFG Part Number DescriptionCPB 15111 Plastic Floor Mats, 21˝ x 16-1/2˝, Box of 250
Plastic Seat CoversBench and bucket seats of all sizes and styles are covered by Slip-N-Grip® seat covers. Their generous size allows complete coverage. Slip-N-Grip® will not shift out of place and expose upholstery even when service work takes many vehicle entries. Seat covers come individually folded in a dispenser box. The CARQUEST logo is printed on each seat cover. Comes in a box of 125.
Image Shown: 15110
MFG Part Number DescriptionCPB 15110 Plastic Seat Covers, Box of 125
Plastic Steering Wheel CoversProtect your customers steering wheel and keep grease and dirt off of one of the most expensive parts on the car today. Comes in a box of 100. Image Shown: 15109
MFG Part Number DescriptionCPB 15109 Plastic Steering Wheel Covers, Box of 100
G8 CARQUEST Service Lines Catalog
Detailing & Auto BodyDisposable Vehicle Protection - Masking Supplies
Plastic Tire MaskersEconomical disposable wheel maskers slip easily over tires to protect during painting. Fits most vehicle tires from small passenger cars to full size pick-up trucks. Box of 125. Image Shown: 15112
MFG Part Number DescriptionCPB 15112 Plastic Tire Masker, Fits up to 33˝ tires,
Box of 125
CPB 15113 Plastic Tire Masker, Fits up to 37˝, Box of 125
Crash Wrap® Protective FilmCrash Wrap® is a tough, flexible, self-adhesive plastic film. Use it to seal broken windows and sprung doors of vehicles left exposed to the weather elements following a collision or vandalism. Crash Wrap® film is 200´ in length, 3 mils thick and entirely coated on one side with a special, light-tack adhesive designed to hold fast yet still be removed without the adhesive transferring or damaging the paint. The film is transparent yellow with UV inhibitors. Crash Wrap® is imprinted with the CARQUEST logo every 12˝.
Image Shown: 15100
MFG Part Number DescriptionCPB 15100 Crash Wrap® Protective Film, 200´
High-Density Overspray SheetingHigh-density, tear resistant, clear film is treated for excellent paint overspray adhesion. Makes it easy to mask areas to be painted and prevent bleed-through. Easy to cut and tape and can be baked at 175°F for 45 minutes. Can be used for indoor storage protection.
Image Shown: 15210
MFG Part Number DescriptionCPB 15210 High-Density Overspray Sheeting, 16´ x 350´
CPB 15211 High-Density Overspray Sheeting, 12´ x 400´
30# Premium Green Masking PaperAvailable in 30# basis weight. 30# premium paper offers maximum protection during the painting process yet has the flexibility and strength to resist tears while positioning on vehicle.
Image Shown: 15198
MFG Part Number DescriptionCPB 15198 30# Premium Green Masking Paper,
18˝ x 1000´/Packed 2 Per Carton
CPB 15199 30# Premium Green Masking Paper, 36˝ x 1000´/Packed 1 Per Carton
CPB 15204 30# Premium Green Masking Paper, 6˝ x 750´/Packed 6 Per Carton
CPB 15205 30# Premium Green Masking Paper, 12˝ x 750´/Packed 3 Per Carton
CPB 15206 30# Premium Green Masking Paper, 18˝ x 750´/Packed 2 Per Carton
CPB 15207 30# Premium Green Masking Paper, 36˝ x 750´/Packed 1 Per Carton
Polycoated Masking Paper Image Shown: 30006
MFG Part Number DescriptionCFM 30006 6" x 750' Polycoated Masking Paper
CFM 30012 12" x 750' Polycoated Masking Paper
CFM 30015 15" x 750' Polycoated Masking Paper
CFM 30018 18" x 750' Polycoated Masking Paper
CFM 30024 24" x 750' Polycoated Masking Paper
CFM 30036 36" x 750' Polycoated Masking Paper
Brown Poly Masking Paper Image Shown: 31018
MFG Part Number DescriptionCFM 31018 18” x 750’ Brown Poly Masking Paper
CFM 31024 24” x 750’ Brown Poly Masking Paper
CFM 31036 36” x 750’ Brown Poly Masking Paper
G9CARQUEST Service Lines Catalog
Detailing & Auto Body HERCULINER® - Electric Polisher
Image Shown: HCL1B7
HERCULINER® Brush-On Bed LinerTough, textured polyurethane protective coating is skid resistant - won´t chip, flake or peel. Prevents rust. Bonds and seals all surfaces. Resistant to gasoline, oil, solvents and chemicals. The complete, ready-to-use kit contains one gallon of protective coating, enough to do a 6 ft. truck bed, plus an application brush for tight spots and corners, two rollers for easy/even application, one roller handle, an abrasive pad to prepare truck bed, and a gallon can opener. Using kit plus one quart will do an 8 ft. truck bed.
MFG Part Number DescriptionHUR HCL1B7 HERCULINER® Black Brush-On Bed Liner, 1
Quart (only)
HUR HCL1B8 HERCULINER® Black Brush-On Bed Liner Kit
Image Shown: 7452
7˝ Variable Speed Electric PolisherA variable speed polisher that is ideal for slow polishing with the power needed for clear coat finishes. A convenient speed dial that allows you to adjust your speed with your thumb while still operating the tool. The electronic speed control maintains the consistent speed while under load. The 7˝ rubber backing pad allows for the use of a bonnet (included) for polishing or sanding disc for sanding.
Spindle Size 5/8˝-11
Variable Speed 1,000-3,000 rpm
Net Weight 8.8 lbs.
MFG Part Number DescriptionEQP 7452 7˝ Variable Speed Electric Polisher
Low Profile Back-Up PadThis is a 6˝ diameter firm, low profile back-up pad that is made of molded urethane with a heavy-duty riveted composite hub and a PSA facing. Thread size is 5/16˝-24. Maximum RPM rating is 10,000. Image Shown: 15012
MFG Part Number DescriptionCPB 15012 Low Profile Back-Up Pad, PSA Facing
CPB 15014 Low Profile Back-Up Pad, Hook Facing
Medium Edge Back-Up PadThese 6˝ diameter medium edge urethane molded pads are firm enough for flat surfaces, yet soft enough for curved surfaces. Designed with a heavy-duty riveted composite hub and available with a PSA facing. Thread size is 5/16˝-24. Maximum RPM rating is 10,000. Image Shown: 15013
MFG Part Number DescriptionCPB 15013 Medium Edge Back-Up Pad, PSA Facing
CPB 15015 Medium Edge Back-Up Pad, Hook Facing
Backing PlateDesigned for hook & loop fast attachment. For use with 7.50˝ to 9.00˝ diameter pads that have loop material backing. Image Shown: 69-080
MFG Part Number DescriptionSAR 69-080 Backing Plate for Hook & Loop 7-1/8˝
Extender Bolt for Double Sided Pads
Image Shown: 69-100
A necessity for extending spindle on polishing machines. 5/8˝.
MFG Part Number DescriptionSAR 69-100 Extender Bolt for Double Sided Pads
Buffing PadsTwisted 4-ply yarn. Used to compound and buff cars and boats. Features a permanently attached backing plate with 1/4” spindle. Fits 1/4”, 3/8” or 1/2” drills. Image Shown: 21170
MFG Part Number DescriptionCPC 21170 Buffing Pad with Backing Plate 5.5˝
Tuffer Buffer™ Standard Professional Bolt-On Compounding & Buffing Pad100% twisted 4-ply wool. Dissipates heat, washable, with perfect balance. Image Shown: 56-075
MFG Part Number DescriptionSAR 56-075 Tuffer Buffer™ Standard Professional Bolt-On
SAR 57-075 Tuffer Buffer™ Standard Professional Bolt-On Compounding & Buffing Pad, Curved Edge 7.5˝ Diameter, 1˝ Thick
SAR 57-275 Tuffer Buffer™ Standard Professional Bolt-On Compounding & Buffing Pad, Curved Edge 7.5˝ Diameter, 1.5˝ Thick
SAR 57-475 Tuffer Buffer™ Standard Professional Bolt-On Compounding & Buffing Pad, Curved Edge 7.5˝ Diameter, 2˝ Thick
Tuffer Buffer™ Standard Professional Compounding & Buffing Pad With Loop Backing100% twisted 4-ply wool. Dissipates heat, washable, with perfect balance. Features Loop Backing which speedily attaches to Hook Backing Plate #69-080 (sold separately)
Image Shown: 57-375
MFG Part Number DescriptionSAR 57-375 Compounding & Polishing Pad Hook & Loop
Curved 7.5˝, 1.5˝ Wool
Double Sided Compound & Polishing Pad100% twisted 4-ply sheepswool. Easy to use and flexible. Specially designed for compounding and general buffing. For use with Extender Bolt #69-100 (sold separately) Image Shown: 58-480
MFG Part Number DescriptionSAR 58-480 Double Sided Compound & Polishing Pad 8˝,
1.25˝ Wool
SAR 58-462 Double Sided Compound & Polishing Pad 6˝
Speedy Foam® 50 PPI Yellow Foam Buffing Pads
Image Shown: 44-609
YELLOW FOAM - Polyester foam pads. Soft, pliable, and tough. Specially designed for light compounding, and paint oxidization removal, on clear coat finishes. Features Dished-in Loop Backing. For easy self-centering of Hook Backing Plate #69-080 (sold separately).
MFG Part Number DescriptionSAR 44-609 Speedy Foam® 50 PPI Yellow Foam Buffing
Pad, 9˝, Flat Surface, Curved Edge
SAR 44-208 Speedy Foam® 50 PPI Yellow Foam Buffing Pad, 8˝, Flat Surface, Flat Edge
COOL-IT™ Recessed 60 PPI Green Foam Pads
Image Shown: 44-617
GREEN FOAM - Polyester foam pads. Soft, pliable, and tough. Specially designed for light compounding and paint oxidization removal on clear coat finishes. COOL-IT™ pattern-cut. Features recessed loop back for extra protection from the edges of the hook backing plate, and easy self-centering of Hook Backing Plate #69-080 (sold separately).
MFG Part Number DescriptionSAR 44-617 COOL-IT™ Recessed 60 PPI Green Foam
Pads, 9˝, Curved Edge
SAR 44-717 COOL-IT™ Recessed 60 PPI Green Foam Pads, 8˝, Recessed
G11CARQUEST Service Lines Catalog
Detailing & Auto Body Buffing Pads / Bonnets / Accessories
Speedy Foam® COOL-IT™ Blue Foam 70 PPI Polishing PadBLUE FOAM - Polyester foam pads. Soft, pliable, and tough. Used for final polishing and finishing. Eliminates swirl marks, and prevents paint burning or graying. COOL-IT™ RECESSED FOAM PADS pattern-cut. Features recessed loop back for extra protection from the edges of the hook backing plate, and easy self-centering of Hook Backing Plate #69-080 (sold separately).
Image Shown: 44-637
MFG Part Number DescriptionSAR 44-637 Speedy Foam® COOL-IT™ Blue Foam 70 PPI
Polishing Pad, 9˝ Diameter, Curved Edge
SAR 44-737 Speedy Foam® COOL-IT™ Blue Foam 70 PPI Polishing Pad, 8˝ Diameter, Recessed
Speedy Foam® Black Foam 80 PPI Polishing PadsBLACK FOAM - Polyester foam pads. Soft, pliable, and tough. Used for polishing. Eliminates swirl marks, and prevents paint burning or graying. COOL-IT™ pattern pattern-cut. Features dished-in loop backing for easy self-centering of Hook Backing Plate #69-080 (sold separately).
Image Shown: 44-659
MFG Part Number DescriptionSAR 44-659 Speedy Foam® COOL-IT™ Black Foam 80 PPI
Polishing Pad, 9˝ Diameter, Curved Edge
SAR 44-758 Speedy Foam® COOL-IT™ Black Foam 80 PPI Polishing Pad, 8˝ Diameter, Recessed
Speedy Foam® White Foam 100 PPI Finishing PadsWHITE FOAM - Polyester foam pads. Soft, pliable and tough. Used for finishing. Eliminates swirl marks and prevents paint burning or greying. Speedily attaches to Hook Backing Plate #69-080 (sold separately).
Image Shown: 44-228
MFG Part Number DescriptionSAR 44-228 Speedy Foam® White Foam 100 PPI Finishing
Pads, Loop Backing, 8˝ Diameter, Flat Pad
SAR 44-629 Speedy Foam® White Foam 100 PPI Finishing Pads, Dished-In Loop Backing, 9˝ Diameter, Curved Edge
SPIN BRITE® 4-Ply Polishing Pads
Image Shown: 53-375
Soft yellow wool and synthetic twisted 4-ply yarn. For final finishing and polishing. Perfect balance. Washable in cold water. Safe for all painted surfaces.
MFG Part Number DescriptionSAR 53-375 SPIN BRITE® 4-Ply Polishing Pads, Loop
Backing, 7.5˝ Diameter, Curved Edge
SPIN BRITE® Wool & Synthetic Polishing Pad
Image Shown: 53-856
Thick plush, blended wool and synthetic fibers. Strong knit back holds fibers tightly. For final polishing of autos and boats for a deep long lasting shine. Features Loop Backing which speedily attaches to Hook Backing Plate #69-080 (sold separately).
MFG Part Number DescriptionSAR 53-856 SPIN BRITE® Wool & Synthetic Polishing Pad,
Loop Backing, 8˝ Diameter, Curved Edge
SPIN BRITE® Wool Polishing Pads
Image Shown: 53-283
100% plush wool fibers with knit back. For final polishing of automobiles, boats and furniture. Safe for all painted surfaces. Features Loop Backing which speedily attaches to Hook Backing Plate #69-080 (sold separately).
MFG Part Number DescriptionSAR 53-283 SPIN BRITE® Wool Polishing Pads, Loop
Backing, 8˝ Diameter, Curved Edge
Micro Buffing Pad KitA special selection of micro pads and accessories for the professional or do-it-yourselfer. Specially designed for buffing or polishing in small, hard-to-get at places. Use for small touch-up spots. Image Shown: 85-938
MFG Part Number DescriptionSAR 85-938 6 Pack Micro Buff Pad Assortment
Terry Bonnets - 2 PacksTerry bonnets are made of soft terry cloth so they are safe to use on all surfaces. Ideal for applying and removing wax and polish. Image Shown: 6-156T
MFG Part Number DescriptionTAG 6-156T 5˝-6˝ Terry Bonnets - 2 Pack
TAG 6-178T 7˝-8˝ Terry Bonnets - 2 Pack
TAG 6-1910T 9˝-10˝ Terry Bonnets - 2 Pack
Synthetic Wool BonnetsThe 5˝-6˝ synthetic wool bonnet is made of extra plush synthetic wool and used for removing oxidation on painted and chrome surfaces. Ideal to use with rubbing compounds. Image Shown: 6-256T
MFG Part Number DescriptionTAG 6-256T 5˝-6˝ Synthetic Wool Bonnet
TAG 6-278T 7˝-8˝ Synthetic Wool Bonnet
Sheepswool Polishing BonnetGenuine quality sheepswool with a knit back with tie-on band for wax removal and final polishing of autos, boats and furniture. Image Shown: 21189
MFG Part Number DescriptionCPC 21189 Sheepswool Polishing Bonnet, 9˝ x 1-1/4˝
Microfiber Applicator Pad with PocketOur absorbent microfiber applicator pad with pocket holds excess product without running or dripping. The convenient pocket design gives you more control when applying wax, polish and protectants.
Image Shown: 9-27MCT
MFG Part Number DescriptionTAG 9-27MCT Microfiber Applicator Pad with Pocket
2 Pack Microfiber Applicator Pad Set with HandleOur microfiber applicator pad set comes with 2 microfiber applicator pads and a handle. The absorbent microfiber holds excess product without running or dripping. The handle with its tiny hooks grab the microfiber pad to make applying wax, polish and protectants easy and keep hands clean. Handles are reusable with other microfiber pads.
Image Shown: 9-513T
MFG Part Number DescriptionTAG 9-513T 2 Pack Microfiber Applicator Pad Set with
Handle
4 Pack of Applicator PadsThe 4 pack of applicator pads are terry knit covered foam pads that produce a smooth and consistent application. Washable and reusable, they are designed for applying wax, polish and protectants. Image Shown: 9-30T
MFG Part Number DescriptionTAG 9-30T 4 Pack of Applicator Pads
Professional Pad Cleaning ToolA pistol grip tool with rotating spur for easy cleaning of polishing bonnets and pads. Image Shown: V1
MFG Part Number DescriptionSAR V1 Professional Pad Cleaning Tool
Tire Dressing ApplicatorOur deluxe tire dressing applicator is made with a super absorbent contoured foam applicator. The permanent molded rubber bumper guard ensures your vehicle's protection. The ergonomic, non-slip handle makes it easy and effective to use.
Image Shown: 6270JT
MFG Part Number DescriptionTAG 6270JT Tire Dressing Applicator
G13CARQUEST Service Lines Catalog
Detailing & Auto Body Applicator Pads - Dusters
Interior BrushOur interior brush with stiff bristles give new life to fabric upholstery, floor mats and carpet. The spot scrubber targets spots for quick results.
Image Shown: 4B326T
MFG Part Number DescriptionTAG 4B326T Interior Brush
3 Pack of Detailing BrushesThe 3 pack of detailing brushes make a complete set of brushes for cleaning seams, corners and body trim. The steel bristle brush removes paint, rust and corrosion. The nylon bristle brush removes wax and residue. The brass bristle brush cleans battery terminals and electrical connections.
Image Shown: 4B319T
MFG Part Number DescriptionTAG 4B319T 3 Pack of Detailing Brushes
Detail BrushWood block handles filled with black nylon. Ideal for getting into small, virtually inaccessible areas of engine, carpet, or upholstery.
Image Shown: 85-622
MFG Part Number DescriptionSAR 85-622 Detail Brush with Nylon Bristles
Engine Cleaning Brush Image Shown: 992
MFG Part Number DescriptionLAI 992 Engine Cleaning Brush, Black Nylon, 5/8˝
Microfiber Dash DusterThe microfiber dash duster is dual sided for greater cleaning flexibility. The microfiber side is used to clean vents and hard-to-reach areas. The bristle side is used to clean small cracks and crevices.
Image Shown: 6341T
MFG Part Number DescriptionTAG 6341T Microfiber Dash Duster
Wheel and Grill BrushOur deluxe wheel and grill brush has stiff bristles for effective wheel and grill cleaning. The permanent molded rubber bumper guard ensures your vehicle's protection. The ergonomic, non-slip handle makes it easy and effective to use.
Image Shown: 6322JT
MFG Part Number DescriptionTAG 6322JT Wheel and Grill Brush
Tire BrushOur deluxe contoured tire brush has stiff bristles for effective tire cleaning. The permanent molded rubber bumper guard ensures your vehicle's protection. The ergonomic, non-slip handle makes it easy and effective to use.
Image Shown: 6323JT
MFG Part Number DescriptionTAG 6323JT Tire Brush
Wheel Detail BrushOur deluxe wheel detail brush is safe and designed to clean all wheels. The permanent molded rubber bumper guard ensures your vehicle's protection. The ergonomic, non-slip handle makes it easy and effective to use.
Image Shown: 6335JT
MFG Part Number DescriptionTAG 6335JT Wheel Detail Brush
Dip and Wash BrushesOur deluxe dip and wash brush has soft, split-tip bristles that are safe on all surfaces. The long handle is for easy reach. The permanent molded rubber bumper guard ensures your vehicle's protection. The ergonomic, non-slip handle makes it easy and effective to use. Image Shown: 6344JT
MFG Part Number DescriptionTAG 6344JT Dip and Wash Brush with 18˝ Handle
TAG 6321JT Dip and Wash Brush with 11˝ Handle
G14 CARQUEST Service Lines Catalog
Detailing & Auto BodyBrushes
Image Shown: 1258
Wash Brush with Handle8˝ brush head has soft flagged salt/pepper bristles, flo-thru handle extends from 39˝ - 62˝ and has a on/off water control valve. Works great on any type of vehicle, boats, siding and decking.
MFG Part Number DescriptionLAI 1258 Wash Brush, 8˝ Brush Head, Flo-Thru Handle
Image Shown: 4B369T
Flow-Thru Wash BrushThe flow-thru wash brush with its soft, split-tip bristles are safe to use on all surfaces. The protective bumper guard prevents surface dings and scratches. The 10˝ brush head washes large surface areas. The 60˝ flow-thru extendable handle cleans hard-to-reach surfaces while the foam grips provide a comfortable and easy grip while cleaning. The on/off switch saves time and water.
MFG Part Number DescriptionTAG 4B369T Flow-Thru Wash Brush
Image Shown: 4B352T
Dip and Wash BrushOur dip & wash brush with its soft, split-tip bristles are safe to use on all surfaces. The protective bumper guard prevents surface dings and scratches.
MFG Part Number DescriptionTAG 4B352T Dip and Wash Brush, 8˝ Brush Head, 47˝ Long
Image Shown: 85-691
Telescopic Flo-Thru Handle with On/Off SwitchThis 75˝ telescopic flo-thru handle is designed with an easy push on/off water control to stop or start the flow of water. Also comes with an ergonomic handle to make all your cleaning tasks more comfortable.
MFG Part Number DescriptionSAR 85-691 Telescopic Flo-Thru Handle with On/Off Switch
Vehicle Wash Brush HeadWide body wash brush set into a wood block, white protective bumper, soft grey synthetic material, acme thread hole for handle. Image Shown: 1512
MFG Part Number DescriptionLAI 1512 Vehicle Wash Brush Head, 8˝, Gray
Synthetic Bristles
Wash Brush HeadsUltra soft flagged nylex bristle for gentle cleaning, safe on almost any surface, high heat and chemical resistant bristles, brush can be used as a hand held, dip brush or used with a flo-thru handle and any standard acme threaded handle.
Image Shown: 1101
MFG Part Number DescriptionLAI 1101 Wash Brush Head, 10˝, With Protective
Bumper, Ultra Soft Nylex Bristles
LAI 1510 Wash Brush Head, Bi-Level, 10˝
Replacement Wash Head CoverSoft, 100 percent cotton chenille washes away dirt and grime. Replacement head cover for stock No. 85-300. Image Shown: 85-301
MFG Part Number DescriptionSAR 85-301 Replacement head cover for stock No. 85-300
G15CARQUEST Service Lines Catalog
Detailing & Auto Body Brooms / Mops / Buckets - Sponges / Wash Mitts
10 Qt. Car Wash BucketThis 10 qt. wash bucket has a sturdy and convenient handle. Image Shown: 9-31T
MFG Part Number DescriptionTAG 9-31T 10 Qt. Car Wash Bucket
Foam Lined Chenille Wash MittThe chenille wash mitt is foamed lined for added comfort and absorbency. The soft chenille is safe to use on all surfaces. Use wet for washing and dry for polishing and dusting. Image Shown: 2-302T
MFG Part Number DescriptionTAG 2-302T Foam Lined Chenille Wash Mitt, 11˝ x 7˝
Heavy-Duty Wash MittOur heavy-duty wash mitt is made with soft, synthetic fibers so it's safe on all surfaces. It's extra thick and absorbent so it holds more soap and water. Use wet for washing and dry for polishing and dusting. Image Shown: 2-316T
MFG Part Number DescriptionTAG 2-316T Heavy-Duty Wash Mitt, 11˝ x 7.50˝
Microfiber Wash Mitt
Image Shown: 2-303MT
This unique microfiber wash mitt with its long and thick pile, holds more soapy water and pulls more dirt away from your washing surface. It scoops, lifts and traps dirt and dust like no other mitt. Use wet for washing and dry for dusting. Cleans even the toughest dirt, yet is gentle on all finishes.
MFG Part Number DescriptionTAG 2-303MT Microfiber Wash Mitt, 11˝ x 7.50˝
Bone SpongeThe bone sponge with its contoured shape is easy to grip. Its large size makes cleaning large surfaces fast and easy. Ideal for washing vehicles of all sizes. Image Shown: 9-3T
MFG Part Number DescriptionTAG 9-3T Bone Sponge
2-N-1 Microfiber Scrubber SpongeThe 2-n-1 microfiber scrubber sponge is dual sided for greater cleaning flexibility. Its contoured shape is easy to grip. The microfiber side washes away dirt and grime. The mesh side scrubs away bug and tar stains and caked-on debris. Safe to use on all surfaces. Image Shown: 9-21MT
MFG Part Number DescriptionTAG 9-21MT 2-N-1 Microfiber Scrubber Sponge
Scrubber SpongeThis mesh covered sponge removes bug and tar stains. It replaces steel wool and other harsh pads. Safe on all surfaces, it's ideal for washing windshields, headlights and windows. Image Shown: 9-24T
MFG Part Number DescriptionTAG 9-24T Scrubber Sponge
12 Pack of Microfiber Cleaning TowelsThis 12 pack of microfiber cleaning towels, made of unique superfine fibers, lift and trap dirt and dust like a magnet. Use wet for washing and dry for polishing and dusting. They are safe to use on all surfaces. Image Shown: 3-517-7T
MFG Part Number DescriptionTAG 3-517-7T 12 Pack of Microfiber Cleaning Towels, 12˝ x 16˝
2 Pack of Microfiber SPA Polishing TowelsOur 2 pack of microfiber spa polishing towels are thick and plush which makes them perfect to remove excess wax and polish from painted surfaces. They are ideal for polishing, buffing and dusting and because they are made of extra soft woven microfiber, they are safe to use on all surfaces.
Image Shown: 3-508T
MFG Part Number DescriptionTAG 3-508T 2 Pack of Microfiber SPA Polishing Towels,
16˝ x 16˝
2 Pack of Microfiber Wash and Scrub TowelsThis 2 pack of microfiber wash & scrub towels are dual sided giving you greater cleaning flexibility. The microfiber mesh side scrubs away bug and tar stains and caked-on debris. The microfiber side washes away dirt and grime. They are made of soft, woven microfiber so they are safe to use on all surfaces. Image Shown: 3-505T
MFG Part Number DescriptionTAG 3-505T 2 Pack of Microfiber Wash and Scrub Towels,
14˝ x 14˝
3 Pack Roll of Microfiber Cleaning ClothsThis 3 pack of microfiber cleaning cloths are made of unique superfine fibers. They lift and trap dirt and dust like a magnet. Use wet for washing and dry for polishing and dusting. They are safe to use on all surfaces. Image Shown: 3-503T
MFG Part Number DescriptionTAG 3-503T 3 Pack Roll of Microfiber
Cleaning Cloths, 12˝ x 16˝
TAG 3-522-7T 24 Pack of Microfiber Cleaning Towels, 12˝ x 16˝
TAG 3-516-7T 8 Pack of Microfiber Cleaning Towels, 14˝ x 14˝
3 Pack Microfiber Wash, Scrub and Glass TowelsOur 3 pack of wash, scrub and glass towels are made of soft, woven microfiber so they're safe on all surfaces. Use the green microfiber towel wet to wash and dry to dust and polish. Use the gray microfiber mesh towel to scrub away bug and tar stains and caked-on debris. Use the blue microfiber towel to cleans glass and mirrors lint free.
Image Shown: 3-501T
MFG Part Number DescriptionTAG 3-501T 3 Pack Microfiber Wash, Scrub and
Glass Towels, 14˝ x 14˝
3 Pack Roll of Microfiber Polishing TowelsThis 3 pack of microfiber polishing towels are made of extra soft woven microfiber so they are safe to use on all surfaces. They are ideal for polishing, buffing and dusting. Image Shown: 3-521-7T
MFG Part Number DescriptionTAG 3-521-7T 3 Pack Roll of Microfiber
Polishing Towels, 16˝ x 16˝
Microfiber Drying TowelThe 6.25 sq. ft. microfiber drying towel is thick and absorbent which helps eliminate water spots and streaks. The towel is extra sized so it dries large surfaces fast. Safe to use on all surfaces. Image Shown: 3-515T
MFG Part Number DescriptionTAG 3-515T Microfiber Drying Towel 6.25 Sq. Ft.
G17CARQUEST Service Lines Catalog
Detailing & Auto Body Textiles - Shop Rags / Towels
Microfiber Waffle Drying TowelThis drying towel is made of soft woven microfiber so it's safe to use on all surfaces. The unique waffle weave gives greater absorbency. It dries steak free and lint free. Image Shown: 3-502T
MFG Part Number DescriptionTAG 3-502T Microfiber Waffle Drying Towel, 5 Sq. Ft.
3 Pack Roll of Polishing ClothsOur 3 pack of soft polishing cloths are perfect for cleaning, dusting, polishing and waxing.
Image Shown: 2-33T
MFG Part Number DescriptionTAG 2-33T 3 Pack Roll of Polishing Cloths, 11˝ x 17˝
Knitted Polishing ClothThe 6 oz. soft, knitted, polishing cloth is safe on all surfaces. It's knitted construction prevents wax and polish build up. Use for waxing, polishing and buffing. Image Shown: 2-4T
MFG Part Number DescriptionTAG 2-4T 6 oz. Knitted Polishing Cloth
Terry TowelsTerry towels are made of soft terry cloth so they are safe to use on all surfaces. They are absorbent and hemmed for extra strength so they are ideal for drying, washing, polishing and dusting. Image Shown: 3-528T
MFG Part Number DescriptionTAG 3-528T 12 Pack of Terry Towels, 14˝ x 17˝
TAG 3-682T 3 Pack Roll of Terry Towels, 14˝ x 17˝
2.5 Sq. Ft. Ultra Dry Drying ClothOur 2.5 sq. ft. ultra dry drying cloth is made of synthetic material and dries streak free and lint free. Tiny pin holes create capillary action allowing the water to absorb faster. It replaces expensive drying leathers. Image Shown: 11-4250T
MFG Part Number DescriptionTAG 11-4250T 2.5 Sq. Ft. Ultra Dry Drying Cloth
Image Shown: CW1
Chamois WringerAn adjustable, gearless, pressure-wringer designed for the professional. It gently squeezes excess moisture from chamois. Water Sprite® and towels. This is an easy-to-use tool that will help extend the life of chamois and cleaning cloths. It easily mounts on any tub or drum, and works by the pressure of the rollers. Individually boxed. 7.50˝ x 12.25˝ – Rollersize:2.00˝Diameterx9.75˝Long.
MFG Part Number DescriptionSAR CW1 Chamois Wringer
Genuine Chamois Leather
Image Shown: TS40T
Tanner's Select Natural Chamois is an environmentally friendly natural product tanned with 100% fish oil from the finest select sheepskin for unsurpassed performance. With its natural ability to absorb water, dirt and dust, without scratching the clear coat finish, Tanner's Select Natural Chamois is the best way to dry, polish and protect your car.
MFG Part Number DescriptionACM TS40T Genuine Chamois Leather, 3 sq. ft.
