XX Inductive sensor “Lip in rest position”
XX Optical sensor “Door closed” to avoid the falls off dock when there is no truck
XX “Door opened” optical detector prevents damage of the door
XX Electric door working authorization: the door functioning is forbidden when the truck is not blocked or when the forklift operator authorization is given
XX Key switch: restricted to authorized persons, authorizes the leveler (and door) operations and also cut off the buzzer
XX Wireless wheel chock (without cable and cable winder) transmitter in the wheel chock and receiver in the control box
XX Wireless Trailer jack stands with interconnecting system Ref. BETJ70
XX Wheel chock options (see next pages)
WIRELESS TECHNOLOGY
Control box
Bicolor external LED traffic light
OPTIONS:
Galvanized Wheel chock ref. CLEL730
or other wheel chock according to specifications
Optical door detector
■ External signalling: Bicolour LED traffic light (red / green) Ø100 mm / IP65
■ Indoor signalling: Red and green LED lights Ø65 mm on the control box
■ Electric control box 230 ou 400 V 50 Hz + earth / Control voltage 24 VDC
■ Sound alarm (buzzer) on the control box ■ Electric Wheel chock: type CLEL6xx, CLEL7xx
or universal CLEL8xx ■ Traffic signs for drivers ■ Dock leveler working authorization
The visual and wedging kit secures your transshipment operations by interconnecting your dock equipments : door, dock leveler, dock shelter ... to a manual electric wheel chock
SECURE YOUR DOCKS!
EXPRESSO France SAS6 rue Frédéric Bartholdi I PA Les Coteaux de la Mossig67319 Wasselonne / FranceCall +33 (0)3 88 04 20 30 - Fax +33 (0)3 88 04 20 39
www.expresso-france.eu
EXPRESSO France SAS - Your Safety Partner s ince 1959
VISUAL AND WEDGING KIT KIFE6XX - KIFE7XX - KIFE8XX
Ref. CLEL730
Visual kit Ref. KIFE730
XX Wheel chock L x W x H 390 x 235 x 250 mm
XX Metal maneuver lever with eccentric
XX 2 polyamid castors Ø160 mm
XX Stop sign
XX Anti-slip rubber
XX High resistance spiral cable : 1.5 m stretchable to 6.5 m
XX Metal cable run of protection and waterproof tee joint
XX Galvanized plate for a total resistance of the sliding of the wheel chock
XX Automatic cable winder 18 or 10m
XX Metal chain to protect the cable and the wheel chock
XX Wireless wheel chock : transmitter in the wheel chock and receiver in the control box
XX Galvanized finish on the range CLEL73x
OPTIONS:
SPECIFICATIONS:
Wheel chock with eccentric EASY TO REMOVE !
with a few movements back and forth
ELECTRIC WHEEL CHOCK WITH ECCENTRIC LEVER CLEL7XX
WIRELESS TECHNOLOGY
(option)
Easy release
thanks to the
eccentric lever
EXPRESSO France SAS - Your Safety Partner - www.expresso-france.euEXPRESSO France SAS - Your Safety Partner - www.expresso-france.eu
Wheel chock ref. CLEL720 with spiral cable
Galvanized plate with slots (option)
18 meter meter cable winder with retaining pawl
cable (en option)
10 meter cable winder with
protection metal support
(option)
The lever facilitates the positioning and removal of the wheel chock
Ref. CLEL725
Ref. CLEL737
Ref. CLEL726
SYSTÈME À EXCENTRIQUE
en quelques mouvements de va et vient
Dégagez facilement la cale
FACILE À DÉGAGER !
CLEL800
GRANDE ROUE
BIG WHEEL
PETITE ROUE
SMALL WHEEL
Patented system
Optimal wedging whatever the diameter of the
wheel !
This eccentric wheel chock has a rotary support which when is pivoted up, allows the wheel chock to block trucks wheels of large diameter.
When the rotary support is folded down at the front, in the lower position, the wheel chock can easily go under the mudguard of the vehicles with low chassis allowing to block small and medium wheels.
XX Wheel chock L x W 395 x 235 mm variable height : - Big wheel height with rotary support up : 273 mm - Small wheel height : 190 mm (rotary support folded down)
XX Polyamid castors diameter 160 mm
XX Same options as the CLEL7xx wheel chock
SPECIFICATIONS:
UNIVERSAL ELECTRIC WHEEL CHOCK WITH ECCENTRIC CLEL8XX
Easy release
thanks to the
eccentric lever
EXPRESSO France SAS - Your Safety Partner - www.expresso-france.eu
Galvanized plate with slots (en option)
Ref. CLEL827
XX CaleBox Depot system for CLEL7xx/CLEL8xx wheel chocks, Height without light: 1000 mm Height with light: 2000 mm Length x Width: 600 x 300 mm
XX Token lock system with contactor
XX Orange signalling light
XX Sound alarm (buzzer)
XX Equipped to the electrical connection, with cable or optional with 10 or 18 meter cable winder
XX Wedging procedure (for drivers) on the CaleBox Depot system
XX CaleBox with wireless receiver and wireless wheel chock
XX 10 or 18 meter cable winder fixed on the Cale box Depot System
XX Nestable support for bi-color LED traffic light ref. SUFE003
OPTIONS:
SPECIFICATIONS:
DEPOT SYSTEM CALEBOX FOR WHEEL CHOCK CLEL7XX / CLEL8XX
The depot system CaleBox (complement of the visual and wedging kit) allows you to store the wheel chock (wireless or not) and manage its use with a Token lock system and an orange fire light.The token is provided to the driver of the truck by the opera-tor of the site in exchange for an ID card that will be returned to its owner after storage of the wheel chock and restitution of the token.
Token lock system
Token
Token lock system
Buzzer
Bicolor LED traffic light
on its nestable support
Ref. ACCL00
0172
Ref. ACCL00
0174
Expresso France ©
12/01/2018
EXPRESSO France SAS - Your Safety Partner - www.expresso-france.eu
Orange signaling
light
Wedging procedure
Dock wheel chock
CaleBox Standard version
CaleBox Wall version