THE FAST WAY TO CUT PLASTERBOARD SAFELY
Artex LimitedPasture Lane, RuddingtonNottinghamshire NG11 6AE
Telephone: 0800 032 6345E-mail: [email protected]: www.gyprocbladerunner.com
This product is subject of Pending Patent Application PCT/GB2006/002222 and Registered European Community Design Number 000655758-0001.
Artex is the registered trademark of BPB United Kingdom Limited, part of the Saint-Gobain Group.
NO EXPOSED BLADES
CUTTING TIME HALVED
SEE THE VIDEOWWW.GYPROCBLADERUNNER.COM
CHANGE THE WAY YOU CUTPLASTERBOARD FOREVER!
THE FAST WAY TO CUT PLASTERBOARD SAFELY
TOUGH CASING
COLLAPSABLE LEGS
TAPE MEASURESLOT
HIGH STRENGTHMAGNETS
THE FAST WAY TO CUT
SAFETY BLADE CARTRIDGESRELEASED AT TOUCH OF A BUTTON
LONG LASTING STAINLESS STEEL BLADES
SOFT GRIP
CONCEALED BLADECARTRIDGES
PLASTERBOARD SAFELY
TAPE MEASURESLOT
BLADERUNNER FEATURES
Bladerunner_UK_DL_leaflet v3:a 15/7/08 15:56 Page 1
HOW TO USE BLADERUNNER – 3 EASY STEPS
WHAT BLADERUNNER CAN DO
BLADERUNNER FEATURES AND BENEFITS
Accessories
NO EXPOSED BLADESBlades never in contact with fingers or hands
CUT IN A FORWARD MOTIONTrip hazards are visible
TOOL IS PUSHED AWAY FROM THE BODYReduced risk of cuts and injury
LESS DUST ON SITEReduced chance of slips
CUTTING TIME HALVEDNo turning to cut reverse of board
Cuts 9.5mm, 12.5mm and 15mm Gyproc WallBoard
Straights
Curves
Steps
Corners
Cuts straight lines and shapes with 12.5mmPerformance Boards and straight lines with15mm Performance Boards, such as;
Gyproc FireLine
Gyproc FireLine MR
Gyproc Moisture Resistant
Gyproc SoundBloc
Gyproc SoundBloc MR
For full list, see Technical Data Sheet
LONG LIFE BLADESChange less frequently on site - cuts enough plasterboardfor 3 typical semi-detached houses
QUICK RELEASE BLADESBlades released at the touch of a button
CUTS SHAPES, CORNERS AND CIRCLESOver three times quicker than a utility knife
NEAT PROFESSIONAL FINISHCut edge finishing time reduced
Consistent finish with every cut
THE FAST WAY TO CUT PLASTERBOARD SAFELY
REDUCES RISK OF ACCIDENTS 1 Grip the top half of the tool andplace onto the edge of theplasterboard, the legs will collapseas you push forward
2 Using the tape measure to guide walkforwards along the full length of theplasterboard to be cut. BladeRunnerwill score both sides of the boardsimultaneously.
3 Finally, snap the board in one actionfor a clean, accurate cut.
REPLACEMENT BLADESThe fast way to cutplasterboard safely
Available in 6 and 12 pack
HOLSTERThe ideal way to carry yourBladeRunner
RASPThe fast way to smooth andshape plasterboard
SAVES TIME ON SITE
Are you
a cut above
the rest?
Win a Mercedes Sprinter
Van with BladeRunner.
Check out
www.gyprocbladerunner.com
or visit www.pro-builder.tvThe circular blades score both sides of the plasterboard, rather than cut
Blades last at least 1,400 linear metres with Gyproc WallBoard
Cuts straights at least twice as fast than with a utility knife
Cuts shapes three to four times faster
BLADERUNNER FACTS
Bladerunner_UK_DL_leaflet v3:a 15/7/08 15:57 Page 2