LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
www.leomadiamant.it - [email protected]
Lame diamantate per seghetti alternativi, per macchine con attacco Bosch, Makita, Ober, Black & Decker, ecc. Altamente aggressive e di lunga durata, sono indicate per il taglio di materiali plastici rinforzati.Disponibili a stock nel modello attacco “Bosch” lun-ghezza 80 mm. Si possono produrre anche per tutti gli altri attacchi presenti sul mercato. Realizziamo lame speciali di qualsiasi forma.
Diamond blade for jig saws as Bosch, Makita, Ober, Black & Decker, etc. Highly aggressive and long-term life, are indicate for cutting reinforced plastic materials. Available in stock in the model “Bosch”, lenght 80 mm. We can also produce all other attacks on the market. We produce also blades of any special form.
GRANA D252Per carbonio, materie plastiche, compositi.
GRANA D427Per vetroresine, � bre
caricate e similari, compositi, marmi, abrasivi.
GRIT D252To work carbon � bres, plastic products, glass.
GRIT D427To work glass � bre, kevlar, composites, reinforced thermoplastics.
UTE
NSI
LI E
LETT
ROD
EPO
SITA
TIEL
ECTR
OPL
ATED
TO
OLS
LAME DIAMANTATE PER SEGHETTO ALTERNATIVO
LSA
BLADES FOR JIG SAWS
42
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Lame diamantate elettrodepositate per seghe a nastro. Qualsiasi lunghezza è realizzabile.
Electroplated Diamond band saw. Any lenght is possible.
COME ORDINARE
Speci� care:SPESSORE NASTRO
ALTEZZA NASTROTIPOLOGIA
(continua, dentata o dentata speciale)
HOW TO ORDER
Specify:THICKNESS OF THE BANDLENGHT OF THE BANDMODEL REQUIRED (continuos, segmented, special segmented)
COD STOCK
LND ✹
UTEN
SILI ELETTROD
EPOSITATI
ELECTROPLATED
TOO
LS
COD.
LAME DIAMANTATE PER SEGHE A NASTRO
LND
DIAMOND STEEL BAND SAW
43
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
Elettrodepositate in Diamante. Attacco cilindrico. Electroplated Diamond. Cylindrical connection.
GRANA D252Per � bra di carbonio,
kevlar, compositi, ceramiche tecniche.
GRANA D427Per vetroresine,
� bre caricate e similari, compositi,
marmi, abrasivi.
GRIT D252To work carbon � bres, kevlar, composites, technic ceramic.
GRIT D427To work glass � bre, aramid � bre and natural � bres, kevlar, composites, reinforced thermoplastics.
DIMENSIONI / DIMENSIONS* CODICE / CODEPUNTA / DRILL
Ø D252 D427 STOCKmm
3 PEL-ED003 252 PEL-ED003 427 ✹4 PEL-ED004 252 PEL-ED004 427 ✹5 PEL-ED005 252 PEL-ED005 427 ✹6 PEL-ED006 252 PEL-ED006 427 ✹7 PEL-ED007 252 PEL-ED007 427 ✹8 PEL-ED008 252 PEL-ED008 427 ✹9 PEL-ED009 252 PEL-ED009 427 ✹
10 PEL-ED010 252 PEL-ED010 427 ✹11 PEL-ED011 252 PEL-ED011 427 ✹12 PEL-ED012 252 PEL-ED012 427 ✹13 PEL-ED013 252 PEL-ED013 427 ✹14 PEL-ED014 252 PEL-ED014 427 ✹15 PEL-ED015 252 PEL-ED015 427 ✹16 PEL-ED016 252 PEL-ED016 427 ✹17 PEL-ED017 252 PEL-ED017 427 ✹18 PEL-ED018 252 PEL-ED018 427 ✹
*N.B. Altre misure, anche con attacchi cono ISO, su richiesta / Di� erent measures (also with ISO conic shanks) on request
UTE
NSI
LI E
LETT
ROD
EPO
SITA
TIEL
ECTR
OPL
ATED
TO
OLS
PUNTE ELICOIDALIPEL
TWIST DRILLS
44
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected] DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Elettrodepositati in Diamante. Per vetroresine, � bre caricate e similari, compositi, marmi, abrasivi.
Electroplated Diamond. To work glass � bre, aramid � bre and natural � bres, kevlar, composites, reinforced thermoplastics.
DIA ØCODICE
CODE STOCKda / from a / tomm
14 30 MA11 ✹32 250 MA2 ✹32 250 MA3* ✹
*TIPO CON SGANCIO RAPIDO / QUICK RELEASE TYPE
SHANK FOR HOLE SAWexagonal shank, center drill HSS
*N.B. Misure diverse su richiesta. / Di� erent measure on request.
DIAØ
CODICE / CODE DIAØ
CODICE / CODE DIAØ
CODICE / CODE DIAØ
CODICE / CODE
D427 STOCK D427 STOCK D427 STOCK D427 STOCKmm mm mm mm14 FOR-ED 14 ✹ 35 FOR-ED 35 ✹ 64 FOR-ED 64 ✹ 102 FOR-ED 102 ✹16 FOR-ED 16 ✹ 37 FOR-ED 37 ✹ 65 FOR-ED 65 ✹ 105 FOR-ED 105 ✹17 FOR-ED 17 ✹ 38 FOR-ED 38 ✹ 67 FOR-ED 67 ✹ 108 FOR-ED 108 ✹19 FOR-ED 19 ✹ 40 FOR-ED 40 ✹ 68 FOR-ED 68 ✹ 111 FOR-ED 111 ✹20 FOR-ED 20 ✹ 41 FOR-ED 41 ✹ 70 FOR-ED 70 ✹ 114 FOR-ED 114 ✹21 FOR-ED 21 ✹ 43 FOR-ED 43 ✹ 73 FOR-ED 73 ✹ 121 FOR-ED 121 ✹22 FOR-ED 22 ✹ 44 FOR-ED 44 ✹ 76 FOR-ED 76 ✹ 127 FOR-ED 127 ✹24 FOR-ED 24 ✹ 46 FOR-ED 46 ✹ 79 FOR-ED 79 ✹ 140 FOR-ED 140 ✹25 FOR-ED 25 ✹ 48 FOR-ED 48 ✹ 83 FOR-ED 83 ✹ 152 FOR-ED 152 ✹27 FOR-ED 27 ✹ 51 FOR-ED 51 ✹ 86 FOR-ED 86 ✹ 160 FOR-ED 160 ✹29 FOR-ED 29 ✹ 52 FOR-ED52 ✹ 89 FOR-ED 89 ✹ 168 FOR-ED 168 ✹30 FOR-ED 30 ✹ 54 FOR-ED 54 ✹ 92 FOR-ED 92 ✹ 177 FOR-ED 177 ✹32 FOR-ED 32 ✹ 57 FOR-ED 57 ✹ 95 FOR-ED 95 ✹ 210 FOR-ED 210 ✹33 FOR-ED 33 ✹ 60 FOR-ED 60 ✹ 98 FOR-ED 98 ✹ 250 FOR-ED 250 ✹
ALBERINO PER FORETTIattacco esagonale, punta pilota HSS MOLLA DI ESPULSIONE
EJECTOR SPRING
UTEN
SILI ELETTROD
EPOSITATI
ELECTROPLATED
TOO
LS
SEGHE A TAZZA (FORETTI)FOR
HOLE SAWS
45
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
www.leomadiamant.it - [email protected]
Filo di acciaio con parte centrale diamantata. Può essere montato su un archetto e usato manualmente per taglio o ripresa di compositi, vetro, acciai speciali, vetroresine, abrasivi, ecc.
Steel wire with central Diamond side. It can be mounted on a bow and used manually to cut or adjust particulars in composite, glass, stainless steel, fiberglass, abrasives, etc..
GRANA / GRIT
D46 D76 D107 D151DIMENSIONI / DIMENSIONS*
CODICE / CODE STOCKL L1 N Ø L1 Ø N
mm
140 20 100
0,3 0,4 0,5 0,6 0,7 EDFD ✹0,5 0,6 0,7 0,8 0,9 EDFD ✹0,6 0,7 0,8 0,9 1 EDFD ✹0,8 0,9 1 1,1 1,2 EDFD ✹1 1,1 1,2 1,3 1,4 EDFD ✹
1,2 1,3 1,4 1,5 1,6 EDFD ✹1,5 1,6 1,7 1,8 1,9 EDFD ✹2 2,1 2,2 2,3 2,4 EDFD ✹
2,5 2,6 2,7 2,8 2,9 EDFD ✹3 3,1 3,2 3,3 3,4 EDFD ✹
*N.B. Diametri e lunghezze diverse sono eseguibili su richiesta. / Di� erent diameters and lengths on request.
UTE
NSI
LI E
LETT
ROD
EPO
SITA
TIEL
ECTR
OPL
ATED
TO
OLS
FILO IN ACCIAIO DIAMANTATOEDFD
DIAMOND STEEL WIRE
46
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected] DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected] DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected] - [email protected] - [email protected] - [email protected]
La pasta diamantata è prodotta con polveri di Diamante di alta qualità.La selezione delle polveri come pure la qualità e la purezza del Diamante sono scrupolosamente controllati nella preparazione della pasta diamantata.La corretta scelta della granulometria dipende dall’applicazione.Produciamo due tipi di pasta diamantata:Pasta di tipo PD/S: a formulazione anidra (senza acqua) indicata per lavorazioni speci� che dell’industria meccanica.Pasta di tipo PD/A: a base acquosa, di facile asportazione dopo la lavorazione, indicata per laboratori metallogra� ci.
The Diamond compound is made with Diamond of high quality. The quality and purity of the Diamond is carefully controlled in the preparation of Diamond paste. The proper choice of particle size depends by the application. We produce two types of Diamond paste:Type PD/S: compound anhydrous (without water) suitable for machining of the mechanical specifica-tions. Type PD/A: water based compound, easy to remove after processing, suitable for metallographic labora-tories.
GRANULOMETRIE / GRIT SIZE PD/S PD/A
COLORE/COLOR MICRON APPLICAZIONI
APPLICATIONSSiringaSyringe
5 cc
SiringaSyringe
10 cc
BarattoloJar
100 cc
SiringaSyringe
5 cc
SiringaSyringe
10 cc
BarattoloJar
100 cc
BIANCO / WHITE 0 / ½ Lappatura a specchio / Mirror lapping ✹ ✹ ✹ ✹ ✹ ✹BIANCO / WHITE 0 -1 Lappatura a specchio / Mirror lapping ✹ ✹ ✹ ✹ ✹ ✹AVORIO / IVORY 1 - 2 Lappatura a specchio / Mirror lapping ✹ ✹ ✹ ✹ ✹ ✹GIALLO / YELLOW 2 - 4 Lappatura / Lapping ✹ ✹ ✹ ✹ ✹ ✹
ARANCIO / ORANGE 4 - 8 Lappatura / Lapping ✹ ✹ ✹ ✹ ✹ ✹VERDE / GREEN 6 - 12 Finitura / Finishing ✹ ✹ ✹ ✹ ✹ ✹
AZZURRO / AZURE 12 - 22 Pre-� nitura / Pre-� nishing ✹ ✹ ✹ ✹ ✹ ✹ROSSO / RED 22 - 36 Media � nitura - Sgrossatura / Medium � nishing - Grinding ✹ ✹ ✹ ✹ ✹ ✹
VIOLA / PURPLE 36 - 54 Sgrossatura / Grinding ✹ ✹ ✹ ✹ ✹ ✹
UTEN
SILI ELETTROD
EPOSITATI
ELECTROPLATED
TOO
LS
PASTA DIAMANTATAPAD
DIAMOND COMPOUND
47
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
H
D
H
D
H
D
H
D
Accessorio per l’utilizzo della pasta diamantata per la � nitura speculare di stampi per plastica, tra� le, ecc. L’ampia gamma di forme e dimensioni consente la lucidatura anche di particolari di forma complessa.Velocità consigliata: 5-10 m/s.
Essential for the use of Diamond paste to mirror � nish for plastic molds, dies, etc. The wide radius of shapes and sizes also allows the polishing of a special form of complex.Recommended speed: 5-10 m/s.
TESTA CILINDRICA RAGGIATA / RADIUS CYLINDRICAL HEAD
TESTA OGIVA / OGIVAE HEAD
TESTA CILINDRICA / CYLINDRICAL HEAD
*N.B. Le dimensioni si intendono indicative. / Measures indicative.
TESTA CONICA RAGGIATA / RADIUS CONICAL HEAD
DIMENSIONI / DIMENSIONS* CODICE / CODE
Ø D H GAMBO /SHANK D427 STOCK
mm6 10
3FPD-CL06 ✹
8 10 FPD-CL08 ✹10 14
6
FPD-CL10 ✹15 20 FPD-CL15 ✹20 25 FPD-CL20 ✹25 30 FPD-CL25 ✹25 6 3 FPD-CL256 ✹
*N.B. Le dimensioni si intendono indicative. / Measures indicative.
DIMENSIONI / DIMENSIONS* CODICE / CODE
Ø D H GAMBO /SHANK D427 STOCK
mm8 12 3 FPD-CR10 ✹
15 20
6
FPD-CR18 ✹15 30 FPD-CR19 ✹20 25 FPD-CR20 ✹25 30 FPD-CR21 ✹
*N.B. Le dimensioni si intendono indicative. / Measures indicative.
DIMENSIONI / DIMENSIONS* CODICE / CODE
Ø D H GAMBO /SHANK D427 STOCK
mm8 12 3 FPD-OG10 ✹
10 186
FPD-OG10 ✹15 30 FPD-OG15 ✹20 25 FPD-OG20 ✹
*N.B. Le dimensioni si intendono indicative. / Measures indicative.
DIMENSIONI / DIMENSIONS* CODICE / CODE
Ø D H GAMBO /SHANK D427 STOCK
mm20 25
6FPD-CA20 ✹
25 30 FPD-CA25 ✹
UTE
NSI
LI E
LETT
ROD
EPO
SITA
TIEL
ECTR
OPL
ATED
TO
OLS
FELTRI PER PASTA DIAMANTATAPAD-A
MOUNTED SHAPED FELT BOBS
48
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
GRANULOMETRIE / GRIT SIZECODICE/
CODE STOCKCOLORE/COLOR
GRANA/GRIT
DIMENSIONI / DIMENSIONS
VERDE / GREEN 60
230x280
TDF-V ✹NERO / BLACK 100 TDF-N ✹ROSSO / RED 200 TDF-R ✹
GIALLO / YELLOW 400 TDF-G ✹BIANCO / WHITE 600 TDF-DM ✹BIANCO / WHITE 800 TDF-DR ✹VIOLA / PURPLE 1500 TDF-VR ✹
ARANCIO / ORANGE 3000 TDF-AR ✹
GRANULOMETRIE / GRIT SIZE
CODICE/CODE STOCKCOLORE/
COLORGRANA/
GRIT
DIMENSIONI / DIMENSIONS
VERDE / GREEN 60
75x75 230x280
TDA-V ✹NERO / BLACK 100 TDA-N ✹ROSSO / RED 200 TDA-R ✹
GIALLO / YELLOW 400 TDA-G ✹BIANCO / WHITE 600 TDA-DM ✹BIANCO / WHITE 800 TDA-DR ✹VIOLA / PURPLE 1500 TDA-VR ✹
ARANCIO / ORANGE 3000 TDA-AR ✹
SERIE “Q”“Q” SERIES
SERIE “R”“R” SERIES
Facilmente ritagliabile anche con semplici forbici. Grazie alla spaziatura dei punti diamantati permette di essere sagomata a piacere o� rendo la possibilità di costruirsi utensili di forma speciale.Il diverso colore permette l’immediata identi� cazione della granulometria.La tela diamantata deve sempre essere utilizzata ad umido per evitare il surriscaldamento ed il conseguente distacco del Diamante dal supporto.
Easily crop even with simple scissors. Thanks to the spacing of the Diamond can be shaped offering the opportunity to build special tools. The color allows the immediate identification of the grit size. The Diamond cloths must always be used wet to prevent overheating and subsequent detachment Diamond support.
TELA DIAMANTATA DA INCOLLAREIdeale per mole sagomate con corpo in gomma.
Si incolla con una normale colla neoprenica.Ideal for rubber body shaped wheels. Bonds with a normal neoprene glue.
DIAMOND CLOTHS TO GLUE
TELA DIAMANTATA SU SUPPORTO ADESIVOIdeale per piccoli utensili. Ideal for little tools
ADHESIVE DIAMOND CLOTH
UTEN
SILI ELETTROD
EPOSITATI
ELECTROPLATED
TOO
LS
TELA DIAMANTATA TD
DIAMOND CLOTHS
49
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
Da usarsi per la pulitura e ravvivatura di utensili elettrodepositati e/o a legante resinoide. Prodotti con abrasivi selezionati e gomme speciali.
To be used for cleaning and dressing electroplated, brazed or resin bond tools. Products with selected abrasives and special tires.
L1L2
L1L2
DIMENSIONI / DIMENSIONS* CODICE /
CODE STOCKLUNGHEZZA/SHANK L1 L2
mm
150 15 15 STG-AT15 ✹
200 20 20 STG-AQR ✹
SEZIONE/SECTION
*N.B. Le dimensioni si intendono indicative / Measures indicative.
SEZIONE TONDAROUND SECTION
SEZIONE QUADRASQUARE SECTION
UTE
NSI
LI E
LETT
ROD
EPO
SITA
TIEL
ECTR
OPL
ATED
TO
OLS
COD.STICK ABRASIVI IN GOMMASTG
RUBBER ABRASIVE STICKS
50
Produzione utensili superabrasivi in Diamante e Borazon® - Superabrasives Diamond and Borazon® tools production
LEOMA DIAMANT srl - Via Bologna, 220/94 - 10154 Torino Italy - Tel. +39 011 3819358 - Fax +39 011 3819425 - www.leomadiamant.it - [email protected]
Produzione utensili superabrasivi in Diamante e Borazon® -
Utensile a punta singola in Diamante naturale, idoneo per la retti� ca di mole abrasive piane o sagomate.
A single point tool in natural Diamond, suitable to dress � at or shaped abrasive grinding wheels.
Stelo standard da 10 x 60 mm. Modi� cabile a richiesta.Standard shank mm. 10 x 60. Modi� able on request.
CARATURA / CARAT SIZE
CODICE/CODE STOCK
0,25 RA025 ✹0,50 RA050 ✹0,75 RA075 ✹1,00 RA100 ✹1,25 RA125 ✹1,50 RA150 ✹1,75 RA175 ✹2,00 RA200 ✹
La scelta della caratura va fatta in base alla larghezza della fascia della mola abrasiva ed al suo diametro. A titolo puramente indicativo, si può seguire la seguentetabella:
Choose the correct carats according to the width and diameter of abrasive wheels. Just as an indication, you can follow the following table:
Scelta corretta della caratura Correct choice of carats
Ø = DIAMETRO MOLA / WHEEL’S DIAMETER
mm 100 200 300 400 500 600 700 800
L = LA
RGHE
ZZA
MOL
A / W
HEEL
’S W
IDTH
20406080
100120140160180200220240260280300
CARATURA CONSIGLIATARECOMMENDED CARATS
> 0,50,5 - 0,75
0,5 - 10,75 - 11 - 1,25
1,5 - 1,751,75 - 2
Es.: Mola Ø 400 mm x L 100 mm = CARATURA 0,75 - 1
Es.: Wheel Ø 400 mm x L 100 mm = CARAT 0,75 - 1
UTEN
SILI ELETTROD
EPOSITATI
ELECTROPLATED
TOO
LS
RAVVIVAMOLE A DIAMANTE SINGOLO
RA
SINGLE POINT DIAMOND DRESSER
51