+ All Categories
Home > Documents > Seldén Deck Hardware Version 6 | lmarinerigging.com

Seldén Deck Hardware Version 6 | lmarinerigging.com

Date post: 29-Nov-2015
Category:
Upload: lmarinegroup
View: 158 times
Download: 17 times
Share this document with a friend
Description:
Consulta su lmarinerigging.com il catalogo Seldén Deck Hardware Version 6. Se necessiti ulteriori informazioni, scrivi a [email protected] oppure chiamaci a 0766 20602.
Popular Tags:
100
DECK HARD WARE Version 6 SELDÉN DECK HARD WARE 1
Transcript
Page 1: Seldén Deck Hardware Version 6 | lmarinerigging.com

DECK HARD WARE

Vers

ion

6SE

LDÉN

DEC

K HA

RDW

ARE

1

Page 2: Seldén Deck Hardware Version 6 | lmarinerigging.com

The information and specifications contained in this catalogue are subject to change without prior notice.

pRoDuCt CAtALoguES

KEELBOATYACHT DINGHY

59

5-8

12

-E 2

01

0-0

2-2

1

PRODUCT CATALOGUE

DINGHY

1

PRODUCT CATALOGUE

Version 1

KEELBOAT

Rig solutions for yachts ranging from 25 to 80 feet.

YACHTPRODUCT CATALOGUE

Edition 6

Rig systems and accessories for 18 to 26 feet boats.

Rig systems and accessories for 25 to 80 feet boats.

We hope this Seldén Deck hardware product catalogue will be helpful for you finding all the accessories you need for enjoyable sail handling. This is just one of four product catalogues covering our extensive range of Yacht, Keelboat, Dinghy and Deck Hardware products. If you need any of the other catalogues you are welcome to pick them up from your local dealer or to download from www.seldenmast.com.

Rig systems and accessories for dinghies.

Art. No. 595-808-E Art. No. 595-950-E Art. No. 595-812-E

Page 3: Seldén Deck Hardware Version 6 | lmarinerigging.com

3

ALWAYS oN tHE RIgHt tRACK

Making the best rig systems in the world is more than a job at Seldén. It’s a passion.

Every Seldén rig is designed and carefully dimensioned for the particular boat.

In our search for perfection, no detail is considered too small. Setting our own deck

hardware standards is a natural step in this systematic approach to achieving the

best possible product for the given task. No matter the size of your boat, whether

you push your equipment to the very limit, or just enjoy leisurely cruising; when you

go Seldén, you’ll go first class, all the way.

Photo credit: Peter Gustafsson cover, page 10, 28, 30, 32, 48, 52, 64, 72, 80. Seldén Mast AB, page 5, 23, 24, 26, 28, 29, 31, 45, 65, 70. Dan Ljungsvik, page 8, 16, 18, 20, 34, 36, 44, 46, 70, 74, 76, 78, 80, 82, 84, 86. Rick Tomlinson, page 76. Peter Szamer, page 26. John Patience, page 34, 84. Carol Baker, page 38. Roberto Vuilleumier, page 42. Billy Black, page 22. Ville Djurberg, page 22. Tommy Andersson, page 68. Max Alm (D.A.D. Sportsware), page 66. Arthur Smeets, page 60. Ola Stensby/Niklas Stranberg, page 14. Jonna Hautau, page 25, 27, 50, 60, 70. Jonas Granhed, cover, page 30, 40, 49, 52, 54, 55, 56, 57, 58, 59, 83. Pontus Ericsson, page 62. Amira Masalin, page 12. ANA Foto, page 10. Leif Wiklund, studio images.

Page 4: Seldén Deck Hardware Version 6 | lmarinerigging.com

WItH pASSIoN. ALL tHE WAY fRom tHE DRAWINg boARD.

Sailing is a total experience. With superb sail handling the good experience easily turns into passion. There are many factors like wind, waves and currents a sailor can’t change. But you can do something about them. That’s why rig equipment should always be chosen with the outmost care, in order to get the most out of it and get the right feel for wind and tuning. The better the precision of your equipment, the better the feel. Sails, mast, standing and running rigging work together as one single

unit. If you want to be on top, you can’t afford to leave anything to chance.Seldén is the world’s leading manufacturer of rig systems. We have been working with boat yards and sail makers all over the world to power thou-sands upon thousands of sailing boats and yachts since 1960. In developing the Seldén deck hard-ware range we have drawn on our many years of rig building experience, our extensive experience of all possible types of sailing and, last but not least,

our own passion for sailing. We hope you will feel the same passion when you use a Seldén deck hardware product or just hold it in your hand. It’s a passion we have built in, all the way from the drawing board.

Page 5: Seldén Deck Hardware Version 6 | lmarinerigging.com

5

Page 6: Seldén Deck Hardware Version 6 | lmarinerigging.com

400 kg

400 kg

100 kg

800 kg

100 kg

400 kg

200 kg

600 kg600

600 kg

100 kg

CHooSE tHE RIgHt pRoDuCtBrEAKING LOADs AND sAfE wOrKING LOADsBreaking loads

Our definition of a breaking load is that load which causes any part of a product to break when it is subjected to successively increasing loads during laboratory testing.

Safe working loads

Our definition of safe working load is set at half the breaking load. We guarantee that products subjected to loads that are below or up to this limit will function satisfactorily.

Loads in the specification tables

The breaking load and safe working load values shown in the product tables are for the product itself (not for the line). The load exerted on the product depends on the load in the line and on the deflection angle of the lines around the sheave. For more information see page 88.

Purchase systems

A mechanical system can be used to increase the effect of human force required for a specific situation. Such systems are designed in several ways. A selection of typical mechanical systems are shown to the right.

6:1 purchase with triple blocks.

4:1 purchase with fiddle blocks.

8:1 purchase with cascade of single blocks.

LOw LOADs AND HIGH LOADsThe practical difference between high loads and low loads depends on the amount of force you must exert to handle them. In our definition, we set the dividing line between high loads and low loads at 100 kg. Even when the load is less than 100 kg, a normal person will require a mechanical system to deal with it, although the mechanical advantage may be relatively low.

A block and tackle with, say, a mechanical advan-tage of 4:1 converts a load of 100 kg into 25 kg, which can, of course, be easily managed by a single crew member. Using a block and tackle with a mechanical advantage of 4:1 means that four times the length of line must be pulled. In theory, this will take longer than it would take without any mechani-cal advantage.

The choice of mechanical advantage depends, therefore, on the load you feel able to manage and how quickly you want to do the job.

sTATIC LOADs AND DYNAmIC LOADs Static loads

A static load is one that does not cause the block sheave to spin. Typical static loads are found in halyard turning blocks, where the sheave remains still under load for long periods of time.

Dynamic loads

A dynamic load is one that causes the block sheave to spin. Typical dynamic loads are found in main sheeting systems, where the sheave spins frequently when sailing.

6

Page 7: Seldén Deck Hardware Version 6 | lmarinerigging.com

All Seldén blocks are of the same superb quality and are the best for their particular application. In order to make it easy to select the right block for your application, we have catego-rised them to suit four types of loads: low loads, high loads, static loads and dynamic loads.

sELDÉN DEsIGNATIONsAll Seldéns deck hardware products have been given descriptive names. See below for the blocks designations.

Seldén blocks are designated in accordance with two main features of the block. The first part of the designation specifies the type of bearing system or other special feature. The second part of the designation tells you the sheave diameter. For example, the PBB 60 is a Plain Bearing Block with a sheave diameter of 60 mm.

THE BLOCK fAmILIEs The blocks are divided into families. All the blocks in a specific family have the same sheave. The part numbers of the sheaves are the basis of the part numbers of the blocks. For example, the PBB 60 sheave is designated 406-001 and the PBB 60 single block is designated 406-001-01.

The part numbers of the sheaves are stamped on the side of each sheave.

High load

Static load

Dynamic load

Low load

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

Tracks and travellers are available in three sizes 22, 30 and 42. This simplified model provides an indication about which system that can be used for which boatsize. For more information see Dimensioning guide page 90.

For more information about how to dimension the Seldén Deck hardware products, see page 88.

7

Page 8: Seldén Deck Hardware Version 6 | lmarinerigging.com

Winches,page 10

Ball bearing blocks,page 34

Eye swivel,page 80

The Seldén deck hardware range is

carefully desig ned, developed and

manufactured under the strict quality

control and attention to detail that is the

hallmark of Seldén. All Seldén deck

hardware is supplied with a 5-year

warranty.

Plain bearing blocks,page 16

Cam cleatspage 76

Valley cleats,page 78

bLoC

KS

WIN

CHES

CLEA

tS

& S

WIV

ELS

SELDÉN DECK HARDWARE

Deck swivel,page 81

8

Page 9: Seldén Deck Hardware Version 6 | lmarinerigging.com

High load plain bearing blocks,page 44

High load ball bearing blocks,page 42

Ratchet blocks,page 46

Tracks,page 50

System 22,page 54

System 30,page 56

System 42,page 60

System 30 Performance, page 62

Control line,page 71

Tackles,page 73

Roller bearing blocks,page 30

Mast swivel,page 81

Accessories,page 84

Deck organizers,page 82

Com

pLEm

ANtA

RY

DECK

HAR

D W

ARE

DIm

ENSI

oNIN

g

DECK

oR

gAN

IzER

S

tRAC

KS &

tR

AVEL

-LE

RSLoads,page 88

Dimensioning,page 90

Unsupported tracks,page 94

Hole patterns,page 95

9

Page 10: Seldén Deck Hardware Version 6 | lmarinerigging.com

SELDÉN REVERSIbLE WINCHES

Winner of DAME Awards 2010www.metstrade.com

Winner of Freeman K Pittman Innovation Award 2011, Racing gear category.

10

Page 11: Seldén Deck Hardware Version 6 | lmarinerigging.com

REVERSINg IS A bIg StEp foRWARD

Stainless drum. No chafe on the line.

Back-tailer

Self-tailer

Triangular handle for ergonomic grip.

Lock-in switch

Unique and patented reverse function operated with a push of your thumb.

Page 12: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

TW

SELDÉN REVERSIbLE WINCHES

R30, R40, R46, R52

WINCH HANDLE

WINCHR30, R40, R46, R52

12

Page 13: Seldén Deck Hardware Version 6 | lmarinerigging.com

W

E

R

T

Q

Art. no. Description Base diameter, (mm)

Weight, (kg)

Line size, (mm)

Power ratio Fasteners

High speed Low speed

470-530-10 R30 143 3.7 8-12 10 30 5xM6

470-540-10 R40 151 3.8 10 40 5xM6

470-546-10 R46 178 4.8 10-14 10 46 5xM8

470-552-10 R52 192 6.5 10 52 5xM8

Art. no. Description Length, (mm)

Weight, (g)

533-927-10 Winch handle254 (10’’)

626

wINCH

wINCH HANDLE

The Seldén winches are manually operated and of self-tailing type with two gears forward. You start winching clock wise on the fast gear, shift down to low gear by rotating the winch handle anti clock wise. So far, exactly as we are all used to.

The ingenious feature with the new Seldén winches is that you can let the line out by rever-sing the winch drum. The purpose made winch handle has a button which is pushed down with your thumb to prepare the winch for reverse drive. The winch handle is rotated clock wise and the line is eased out. The line remains in the self-tailing jaws all the time which means it’s a one hand operation to trim the sheet, the halyard or the spinnaker guy.

Fast trim is a great advantage for the racing sailor! To ease out the sheet, just push the button on top of the handle and turn clock wise. There is no need to even touch the line. Instant trim makes for higher boat speed. For the family cruising sailor, one handed operation means safety – no hands are even close to the drum when easing out the line. In rough conditions you can hold on with your free hand. Single handed sailors can steer and trim at the same time.

Unique and patented reverse function •operated with a push of your thumb.

Stainless drum with 10 flat faces makes for •excellent grip and is kind to the line. It looks good too.

Low weight. The centre tower is partly •composite.

Compatible with all winch handles on the •market, but only the Seldén winch handle offers 2-speed forward and 1-speed reverse.

10” Seldén winch handle with lock-in switch.•

Smooth and well rounded reverse feeder. The •sheet can be dumped fast when tacking.

5 years warranty.•

13

Page 14: Seldén Deck Hardware Version 6 | lmarinerigging.com
Page 15: Seldén Deck Hardware Version 6 | lmarinerigging.com

bLoCKS mADE foR pERfECt INtERACtIoN

Seldén blocks give you the benefits of a high strength to

weight ratio. We only use top quality materials like glass fibre

reinforced composite and marine grade stainless steel. Each

com ponent is designed for top performance and perfect

interaction with the rig under all conditions. The Seldén block

range consists of plain bearing blocks, roller bearing blocks,

ball bearing blocks, high load ball bearing blocks, high load

plain bearing blocks and ratchet blocks.

Ball bearing blocks

High load ball bearing blocks

High load plain bearing blocks

Plain bearing blocks

Roller bearing blocks

Ratchet blocks

15

Page 16: Seldén Deck Hardware Version 6 | lmarinerigging.com

TECHNICAL FEATURES

•Stainlesssteelstrapforbeststrengthandlonger service life.

•Stiffglassfibrereinforcedcheekstopreventlines from wedging.

•Glassfibrereinforcedcomposite.•Innovativedesignwith“tool-free”slidingswivel

locking mechanism.

In order to cope with high loads, the PBB 70/80 is also equipped with:•GlassfibrereinforcedsheavewithTeflon® bushing.•Bronzetopswivelbushings(PBB80).

APPLICATIONS

Plain bearing blocks are typically used for heavy and static loads in:•Halyardtuning•Mainsheetsystems•Boomvang

CHOOSE THE RIGHT BLOCK FOR YOUR APPLICATION

Plain bearing blocks provide great perform-ance in applications with heavy and static loads. Available in 16, 20, 50, 60, 70, 80 and 100 mm sheave diameters.

SELDÉNpLAIN bEARINg bLoCKS

PBB 20,page 17

PBB 16,page 17

PBB 50,pages 18-19

PBB 60,pages 20-21

PBB 70,pages 22-23

PBB 80,pages 24−25

PBB 100,pages 26−27

PBB 60/80Quick lock,pages 28–29

High load

Static load

Dynamic load

Low load

PBB

16

Page 17: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

Q

E

W

Torsional rigid cheeks in glass fibre filled composite prevent jamming

Stainless steel straps for increased safety

Bronze bushing (PBB 80)

Glass fibre reinforced sheave with Teflon® bushing

Teflon® bushing

Practical switch from swivelling to fixed shackle

PBB 50/60

PBB 70/80

TECHNICAL FEATURES PBB 20

•Acetalsheave•Stiffglassfibrereinforcedcheeksto

prevent lines from wedging

TECHNICAL FEATURES PBB 16

•Asmallstainlessblockdesignedforflag lines, lazy jacks and similar applications.

•Fixedstrapforlashing.

•Availablewithtwoalternativesheaves, composite or brass.

pLAIN bEARINg bLoCK

16/20

Art. No. Description Weight(g)

Safe wor-king load

(kg)

Breaking load (kg)

Max line size (mm)

401-001-01R Single, Composite 4 70 140 6

401-001-02RSingle, Brass 10 100 200 6

Art. No. Description Weight(g)

Safe wor-king load

(kg)

Breaking load (kg)

Max line size (mm)

402-001-01R Single strap 6 70 140 6

PBB 20Single strap

PBB 16

PBB 20

PBB 16Single

17

Page 18: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R T Y

U I O

PBB 50 Triple

PBB 50 Triple becket

PBB 50 Triple cam

TECHNICAL FEATURES PBB 50

•Acetalsheave.•Stainlesssteelstrapforbeststrength

and longer service life.•Stiffglassfibrereinforcedcheeksto

prevent lines from wedging.•Glassfibrereinforcedcomposite.•Slidingswivellockingmechanism.

PBB 50 Single

PBB 50 Single becket

PBB 50 Single cam

PBB 50 Single becket cam

PBB 50 Double

PBB 50 Double becket

pLAIN bEARINg bLoCK

50

High load

Static load

Dynamic load

Low loadPBB 50

18

Page 19: Seldén Deck Hardware Version 6 | lmarinerigging.com

P { } q

w

y

e r t

PBB 50 Triple becket cam

PBB 50 Fiddle cam

PBB 50 Fiddle becket cam

PBB 50 Fiddle, twin-cam*

PBB 50 Cheek

PBB 50 Cheek R260

PBB 50 Cheek R40

PBB 50 Fiddle

PBB 50 Fiddle becket

PBB 50

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

405-001-01R Single 113 700 1400 12 5

405-001-02R Single becket 129 700 1400 12 5

405-001-03R Single cam 195 120* 240 12 5

405-001-04R Single becket cam 212 240* 480 12 5

405-001-05R Double 217 700 1400 12 5

405-001-06R Double becket 233 700 1400 12 5

405-001-07R Triple 292 700 1400 12 5

405-001-08R Triple becket 306 700 1400 12 5

405-001-09R Triple cam 426 600* 1200 12 5

405-001-10R Triple becket cam 440 700 1400 12 5

405-001-11R Fiddle 150 700 1400 12 5

405-001-12R Fiddle becket 161 700 1400 12 5

405-001-13R Fiddle cam 234 360* 720 12 5

405-001-14R Fiddle becket cam 244 480* 960 12 5

405-001-15R Cheek 80 700 1400 12 3xM5 (not included)

405-001-16R Cheek R260 81 700 1400 12 3xM5 (not included)

405-001-17R Cheek R40 81 700 1400 12 3xM5 (not included)

405-001-40R Fiddle twin-cam 355 120* 240 12 405-040-01

Q

W

E

R

T

Y

U

I

O

P

{

}

q

w

e

r

t

y *For endless furling line used for Seldén Code X furling systems.

For more information about dimensioning, see page 90.

* Safe working load based on cam cleat 433-302-01.19

Page 20: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R T Y

U I OTECHNICAL FEATURES PBB 60

•Acetalsheave.•Stainlesssteelstrapforbeststrength

and longer service life.•Stiffglassfibrereinforcedcheeksto

prevent lines from wedging.•Glassfibrereinforcedcomposite.•Slidingswivellockingmechanism.

Static load

High load

Dynamic load

Low loadPBB 60

PBB 60 Triple

PBB 60 Triple becket

PBB 60 Triple cam

PBB 60 Single

PBB 60 Single becket

PBB 60 Single cam

PBB 60 Single becket cam

PBB 60 Double

PBB 60 Double becket

pLAIN bEARINg bLoCK

60

20

Page 21: Seldén Deck Hardware Version 6 | lmarinerigging.com

P { } q

e r t

w

y u

PBB 60 Triple becket cam

PBB 60 Fiddle cam

PBB 60 Fiddle becket cam

PBB 60 Cheek

PBB 60 Cheek R345

PBB 60 Cheek R48

PBB 60 Fiddle

PBB 60 Fiddle becket

PBB 60

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

406-001-01R Single 189 1100 2200 14 6

406-001-02R Single becket 211 1100 2200 14 6

406-001-03R Single cam 286 120** 240 12 6

406-001-04R Single becket cam 308 240** 480 12 6

406-001-05R Double 357 1100 2200 14 6

406-001-06R Double becket 378 1100 2200 14 6

406-001-07R Triple 500 1100 2200 14 6

406-001-08R Triple becket 524 1100 2200 14 6

406-001-09R Triple cam 658 600** 1200 12 6

406-001-10R Triple becket cam 670 720** 1480 12 6

406-001-11R Fiddle 254 1100 2200 14 6

406-001-12R Fiddle becket 271 1100 2200 14 6

406-001-13R Fiddle cam 350 360** 720 12 6

406-001-14R Fiddle becket cam 369 480** 960 12 6

406-001-15R Cheek 141 1100 2200 14 3xM6 (not included)

406-001-16R Cheek R345 137 1100 2200 14 3xM6 (not included)

406-001-17R Cheek R48 145 1100 2200 14 3xM6 (not included)

406-001-20R Double cheek 292 1100* 2200* 14 3xM6 (not included)

406-001-40R Fiddle twin-cam 500 120** 240 12 406-040-01R

Q

W

E

R

T

Y

U

I

O

P

{

}

q

w

e

r

t

y

u

* Upper sheave: Safe working load = 550 kg. Breaking load = 1100 kg. ** Safe working load based on

cam cleat 433-302-01.

PBB 60 Double cheek

PBB 60 Fiddle, twin-cam*

*For endless furling line used for Seldén Code X furling systems.

For more information about dimensioning, see page 90.

21

Page 22: Seldén Deck Hardware Version 6 | lmarinerigging.com

pLAIN bEARINg bLoCK

70

Static load

High load

Dynamic load

Low loadPBB 70

TECHNICAL FEATURES PBB 70

•GlassfibrereinforcedsheavewithPolymerbushing.

•Optimised6/8shacklewithØ6bodyforgoodcompatibilityandØ8pinforhighbendingresistance.

•Stainlesssteelstrapforbeststrengthandlonger service life.

•Stiffglassfibrereinforcedcheekstopreventlines from wedging.

•Glassfibrereinforcedcomposite•Slidingswivellockingmechanism.

22

Page 23: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R T

Q

W

R

E

T

PBB 70

Art. No. Description Weight(g)

Safe wor-king load

(kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

407-001-01R Single 254 1500 3000 14 6/8

407-001-02R Single becket 285 1500 3000 14 6/8

407-001-05R Double 495 1500 3000 14 6/8

407-001-11R Fiddle 372 1500 3000 14 6/8

407-001-12R Fiddle becket 395 1500 3000 14 6/8

PBB 70 Single

PBB 70 Single becket

PBB 70 Double

PBB 70 Fiddle

PBB 70 Fiddle becket

PBB 70 double used for German sheeting.

For more information about dimensioning, see page 90.

23

Page 24: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W

E R

T Y

PBB 80 Single

PBB 80Single becket

PBB 80 Double

PBB 80 Double becket

PBB 80Triple

PBB 80 Triple becket

pLAIN bEARINg bLoCK

80

Static load

High load

Dynamic load

Low loadPBB 80

24

Page 25: Seldén Deck Hardware Version 6 | lmarinerigging.com

U I O

P

Q

W

E

R

T

Y

U

I

O

P

PBB 80 Fiddle

PBB 80Fiddle becket

PBB 80Single cheek

PBB 80

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

408-001-01R Single 471 2000 4000 16 8/10

408-001-02R Single becket 524 2000 4000 16 8/10

408-001-05R Double 846 2000 4000 16 8/10

408-001-06R Double becket 901 2000 4000 16 8/10

408-001-07R Triple 1154 2000 4000 16 8/10

408-001-08R Triple becket 1204 2000 4000 16 8/10

408-001-11R Fiddle 603 2000 4000 16 8/10

408-001-12R Fiddle becket 638 2000 4000 16 8/10

408-001-15R Single cheek 310 2000 4000 16

3xM8 (not

included)

408-001-20RDoublecheek 628 2000 (lower sheave)

1000 (upper sheave)4000 (lower sheave)2000 (upper sheave) 16

3xM8 (not

included)

TECHNICAL FEATURES PBB 80

•Glassfibrereinforcedsheavewith polymer bushing.

•Bronzetopswivelbushings.•Optimised8/10shacklewithØ8body forgoodcompatibilityandØ10pinfor high bending resistance.

•Stainlesssteelstrapforbeststrength and longer service life.

•Stiffglassfibrereinforcedcheeksto prevent lines from wedging.

•Glassfibrereinforcedcomposite.•Slidingswivellockingmechanism.

PBB 80 Double cheek

PBB 80 Triple

For more information about dimensioning, see page 90.

25

Page 26: Seldén Deck Hardware Version 6 | lmarinerigging.com

TECHNICAL FEATURES PBB 100

A plain bearing block handling up to 4 ton •load. The block features a plain bearing with •acetal bushing and two axial Delrin® bearings. These stabilize the sheave when the rope enters or exits the block with an angle. Machined, black anodised aluminium •sheave and cheeks. The swivel pin is hollow and chamfered to •reduce weight and all stainless parts are insulated from aluminium to prevent corrosion. The blocks are quick and easy to •dismantle for maintenance.

pLAIN bEARINg bLoCK

100

Machined, black anodised aluminium cheeks

Machined, black anodised aluminium sheave

Acetal bushing

Ø12mmshackle

Set screw. Switching from swivelling to fixed shackle

Delrin® ball bearings

High load

Static load

Dynamic load

Low load

PBB 100

Swivel pin is hollow toreduce weight

APPLICATIONS

Outhaul arrangements •Sheets•Halyards•

26

Page 27: Seldén Deck Hardware Version 6 | lmarinerigging.com

R

Q W

Q

W

E

R

B1

E

PBB 100 Single

PBB 100 Single swivel becket

PBB 100 Single halyard

PBB 100 Cheek

PBB 100

Art. No. Description Weight(g)

Width B1

(mm)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

410-001-01R Single swivel 1030 - 4000 8000 20 12

410-001-02R Single swivel becket 1100 - 4000 8000 20 12

410-001-03R Single halyard 633 16.5 4000 8000 2016 mm

pin

410-001-15R Cheek 740 - 4000 8000 203xM10

(not inclu-ded)

PBB 100 Cheek

For more information about dimensioning, see page 90.

27

Page 28: Seldén Deck Hardware Version 6 | lmarinerigging.com

TECHNICAL FEATURES PBB 60/80 QUICK LOCK

•Springloadedarmforpreciseandreliable locking operation. The spring holds the arm in open or closed positions. •TheQuickLockfunctionisintendedfor temporary use only, and does not replace a normal clutch or a cleat. •Acetalsheave(PBB60).•Glassfibrereinforcedsheavewithpolymer bushing (PBB 80).•Torsionallyrigidcheeksinglassfibrefilled composite prevent jamming of the line. •Radialloadsareabsorbedbyastainless strap inside the cheeks. A safety feature quite typical for Seldén products.

pLAIN bEARINg bLoCK

60/80quICK LoCK

Spring

Stainless steel reinforcement for increased safety

Torsional rigid cheeks in glass fibre filled composite

Stainless steel arm

High load

Static load

Dynamic load

Low loadPBB 60

PBB 80

28

Page 29: Seldén Deck Hardware Version 6 | lmarinerigging.com

T

U

Y

I

E

U

R

I

Q

T

W

Y

Q

E

W

R

α/2 α/2

PBB 60/80 Single cheek with Quick lock, anti-clockwise

PBB 60/80 Single cheek with Quick lock, clockwise

PBB 60/80 Double cheek with two Quick lock, anti-clockwise

PBB 60/80 Double cheek with two Quick lock, clockwise

PBB 60 QUICK LOCK

PBB 80 QUICK LOCK

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Fasteners

406-001-18RSingle cheek with Quicklock, anti-clockwise

198 1100 2200 14 3xM6 (not included)

406-001-19RDouble cheek with twoQuicklock, anti-clockwise

398 1100 (lower sheave) 550 (upper sheave)

2200 (lower sheave)1100 (upper sheave) 14 3xM6 (not

included)

406-001-21R Single cheek with Quicklock,clockwise 198 1100 2200 14 3xM6 (not

included)

406-001-22RDouble cheek with twoQuicklock, clockwise

398 1100 (lower sheave) 550 (upper sheave)

2200 (lower sheave)1100 (upper sheave) 14 3xM6 (not

included)

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Fasteners

408-001-18RSingle cheek with Quicklock, anti-clockwise

395 2000 4000 16 3xM8 (not included)

408-001-19RDouble cheek with twoQuicklock,anti-clockwise

778 2000 (lower sheave) 1000 (upper sheave

4000 (lower sheave) 2000 (upper sheave 16 3xM8 (not

included)

408-001-21R Single cheek with Quicklock,clockwise 395 2000 4000 16 3xM8 (not

included)

408-001-22RDouble cheek with twoQuicklock, clockwise

778 2000 (lower sheave) 1000 (upper sheave

4000 (lower sheave) 2000 (upper sheave 16 3xM8 (not

included)

PBB 60 Single cheek with Quick lockPBB 60 with locked arm.

Fit cheek blocks so that they align with the direction of total load.

For more information about loads and hole patterns see page 88.

29

Page 30: Seldén Deck Hardware Version 6 | lmarinerigging.com

seldén ROlleR beaRing blOck

SELDÉN ROLLER BEARING BLOCKS

Low resistance at high, dynamic loads are the main characteristics of Seldén Roller Bearing Blocks (RBB). The ability to easily release a highly loaded backstay tackle, german sheeting boom, a spinnaker halyard or a kicker tackle makes for fast, safe and uncompli- cated maneuvers. You will find yourself focusing on what really matters. Boat speed.

High load

Static load

Dynamic load

Low load

RBB

30

Page 31: Seldén Deck Hardware Version 6 | lmarinerigging.com

TECHNICAL FEATURES RBB 60/80

•Designedforhighload,dynamicapplications.

•Machined,blackanodisedaluminiumcheeksand Torlon® roller bearings.

•PAwasherinsulatesstainlessfromaluminiumto prevent corrosion.

•TheshacklefeaturesaØ6/8mmbodyandØ8/10 mm pin, a strong and lightweight combination.

•Theswivelpinishollowandchamferedtoreduce weight.

•Acetalballbearingstabilizethesheavewhen subjected to side loads.

Machined,blackanodised aluminium cheeks.

Acetalballbearings

Torlon® rollers

Insulating washer

Machined,black anodised aluminium sheave

Ø6mmbody(RBB60)Ø8mmbody(RBB80)

Ø8mmpin(RBB60)Ø10mmpin(RBB80)

Swivel pin is hollow toreduce weight

Set screw. Switching from swivelling to fixed shackle.

The winch feeder is used for leading a line to a free winch.

31

Page 32: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R T Y U

Q

W

E

R

T

Y

U

ROlleR beaRing blOck

60

RBB 60Cheek

RBB 60 Winch feeder

RBB 60 Flip flop

RBB 60

Art. No. Description Weight(g)

Width B1 (mm)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

406-201-01R Single swivel 205 - 1500 3000 12 6/8

406-201-02R Single swivel becket 215 - 1500 3000 12 6/8

406-201-03R Single back-stay/halyard 135 14 1500 3000 12 8mmshaft

406-201-05R Double swivel 330 - 1500 3000 12 6/8

406-201-07R Cheek 140 - 1500 3000 12 3xM6

406-201-08R Winch feeder 126 - 1500 3000 12 1xM10 countersunk

406-201-09R Flip flop 274 - 1350 2700 12 4xM6

RBB 60 Single swivel

RBB 60Single swivel becket

RBB 60 Single backstay/halyard

RBB 60 Double swivel

High load

Static load

Dynamic load

Low load

RBB 60RBB 80

The flip flop block is ideal for leading a vertical line aft. It is perfect for German sheeting. The deck attachments are well rounded machined aluminium. Leads and bushings between the shaft and the leads prevent rattling. The sheave is a RBB60 with Torlon roller bearings and Acetal ball bearings. The flip flop block has a great combination of low friction, flexibility and low chafe.

32

Page 33: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

W

E

R

T

E

Q W

R T

B1

RBB 80Cheek

ROlleR beaRing blOck

80

RBB 80

RBB 80 Single swivel

RBB 80Single swivel becket

RBB 80 Single/halyard

RBB 80 Double swivel

Art. No. Description Weight(g)

Width B1 (mm)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle/ fasteners

(Ø mm)

408-201-01R Single swivel 417 - 2500 5000 14 8/10

408-201-02R Single swivel becket 300 - 2500 5000 14 8/10

408-201-03R Single/halyard 282 14.5 2500 5000 14 10mmshaft

408-201-05R Double swivel 667 - 2500 5000 14 8/10

408-201-07R Cheek 296 - 2500 5000 14 3xM8

RBB 80 Single swivel

RBB 60 and RBB 80 Single backstay/halyard

33

Page 34: Seldén Deck Hardware Version 6 | lmarinerigging.com

CHOOSE THE RIGHT BLOCK FOR YOUR APPLICATION

Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation withthelowestpossiblefriction.Availablein20,30and40mmsheavediameters.

seldénball beaRing blOcks

BBB 30,pages 38-39

BBB 40,pages 40-41

BBB 20,pages 36-37

High load

Static load

Dynamic load

Low load

BBB

Through deck block available in sizes BBB 20, BBB 30 and BBB 40Suitable for dinghy and keelboat control lines, and also Furlex TD furling line.

404-040-01R Snap shackle 40 makes it easy to remove the block when needed It can be fitted to all Seldén BBB 40 blocks and. See page 85 for more information.

34

Page 35: Seldén Deck Hardware Version 6 | lmarinerigging.com

BBB 30

BBB 40

BBB20

TECHNICAL FEATURES BBB 20

• Stainless steel strap to ensure high strength and stiff sides.

•Stainlesssteelballbearingracesandglassfibre reinforced sheave for best bearing strength even under high dynamic loads.

•Glassfibrereinforcedpolyamidecomposite.

TECHNICAL FEATURES BBB 30/40

•Stainlesssteelballbearingraces,stainlesssteelballbearings and glass fibre reinforced sheave for best bearing strength even under high dynamic loads.

•Acetalbearingcagestopreventball-to-ball friction and to reduce weight.

•Glassfibrereinforcedcomposite.

APPLICATIONS

Ball bearing blocks are typically used for medium and dynamic loads in:•Controllineapplications•Mainsailsheetsfordinghiesandkeelboats•Spinnakersheets,barberhaulers•Genoasheets•Dinghyapplications•Vangapplications

Cheeks with composite, 50/50glassfibre/polyamide

Stainless steel races

Big bearing diameter – less friction

Acetalball bearing cages

Stainless steel balls

CASCADE SYSTEMBBB 30/40

For BBB 30 and BBB 40. A special insert is used to locate the shackle at 0° or 90°. When removed the shackle spins freely.

Fixed or swivelling shackle

35

Page 36: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

U

R T Y

I

BBB 20Triple becket cam

ball beaRing blOck

20 BBB 20Single strap

BBB 20Triple becket

BBB 20Double

BBB 20Single becket strap

BBB 20Double becket

BBB 20Triple

BBB 20Triple cam

Actualsize

High load

Static load

Dynamic load

Low loadBBB 20

36

Page 37: Seldén Deck Hardware Version 6 | lmarinerigging.com

P

O

{

} q w

1. 2. 3.

Q

W

E

R

T

Y

U

I

O

}

P

q

{

w

TECHNICAL FEATURES BBB 20

•Stainlesssteelstraptoensurehighstrengthandstiffsides.•Stainlesssteelballbearingsandglassfibrereinforcedsheave

for best bearing strength even under high dynamic loads.•Glassfibrereinforcedcomposite.

TECHNICAL FEATURES BBB 20 TIE ON AND CHEEK BLOCK

•Glassfibrereinforcedcomposite cheeks. •Acetalballbearingsforlightweight.•Glassfibrereinforcedsheave.

APPLICATIONS

•Controllinesondinghiesandkeelboats.•Leechlineapplicationsonyachts.

BBB 20

TIPS FOR FITTING BBB 20 TIE ON

BBB20tieoncanbefittedin three different ways. Note that the safe working load of the block is reducedby50%whentheBBB20isfitted as in picture 3.

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle

402-101-01R Single strap 14 150 300 6 –

402-101-02R Single becket 16 150 300 6 –

402-101-03R Double 35 300 600 6 –

402-101-04R Double becket 36 300 600 6 –

402-101-05R Triple 52 300 600 6 –

402-101-06R Triple becket 54 300 600 6 –

402-101-07R Triple cam 98 300 600 6 –

402-101-08R Triple becket cam 100 300 600 6 –

402-101-09RSingle, fixed shackle

22 150 300 6 4

402-101-12R Single tie on 7 100* 200* 6 –

402-101-13R Single cheek 6 100 200 6

2xM4(notincluded)

402-101-16R Single lead 8 100 200 62xM4(not

included

402-101-17RSingle through deck

9 100 200 62xM4(not

included

402-101-18RDouble through deck

17 100 200 62xM4(not

included

BBB 20Single cheek

BBB 20Single lead

BBB 20Single through deck

BBB 20Double through deck

BBB 20 Single tie on

BBB 20 Single fixed shackle

BBB 20 Cheek and single tie on are ideal for sail applications.

BBB 20 SINGLE TIE ON

Composite axle Acetalballs

*Safeworkingload=50kg,breakingload=100kgwhentheBBB20isfittedasinpicture3(totheleft). 37

Page 38: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R

O

T Y

U I

BBB 30Triple loop head becket cam

BBB 30Single tie-on

BBB 30Double loop head becket

BBB 30Triple loop head

TECHNICAL FEATURES BBB 30

•Stainlesssteelballbearingraces,stainlesssteel ball bearings and glass fibre reinforced sheave for best bearing strength even under high dynamic loads.

•Acetalbearingcagetopreventball-to-ball friction and to reduce weight.

•Glassfibrereinforcedcomposite.

ball beaRing blOck

30BBB 30Single strap

BBB 30Single swivel/fixed, becket

BBB 30Double loop head

BBB 30Single cheek

BBB 30Single swivel/fixed

High load

Static load

Dynamic load

Low loadBBB 30

Actualsize

38

Page 39: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

I

W

O

E

P

R

{

T

}

e

Y

q

r

w

t

U

}

r

P q

tw

{

e

BBB 30Triple becket

BBB 30Single becket strap

BBB 30Clew block

BBB 30Triple cam

BBB 30Single swivel, stand up

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

403-101-01R Single swivel/fixed 33 200 400 8 4

403-101-02R Single strap 24 200 400 8 –

403-101-03R

Single swivel/fixed, becket

35 200 400 8 4

403-101-04R Double loop head 49 400 800 8 –

403-101-05R Double loop head becket 52 400 800 8 –

403-101-06R Triple loop head 77 600 1200 8 –

403-101-07RTriple loop head becket cam

130 540* 1080 7 –

403-101-08R Single tie on 21 200 400 8 –

403-101-09R Single cheek 22 200 400 8 2xM4 (not

included)

403-101-10R Triple becket 79 600 1200 8 –

403-101-11R Triple cam 126 450* 900 7 –

403-101-12RSingle swivel, stand up

30 200 400 8 2xM4 (not included)

403-101-13RSingle becket strap

29 200 400 8 –

403-101-14R Clew block 68 200 400 8 Ring Ø35x5

403-101-22RSingle through deck

24 200 400 8 2xM5 (not included)

403-101-23R Single lead 22 200 400 8 2xM5 (not included)

403-101-24RDouble through deck

44 200 400 8 2xM5 (not included)

The centre hole can be used as a becket.

BBB 30

BBB 30Single lead

BBB 30Double through deck

BBB 30Single through deck

* Safe working load based on cam cleat 433-201-01.39

Page 40: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W E

R T

I O

Y

U

BBB 40Triple swivel

BBB 40Single swivel/fixed, becket

BBB 40Single swivel/fixed, cam

BBB 40Single swivel/fixed, becket cam

BBB 40Triple swivel becket

BBB 40Single swivel/fixed

BBB 40Single strap

TECHNICAL FEATURES BBB 40

•Stainlesssteelballbearingraces,stainlesssteelball bearings and glass fibre reinforced sheave for best bearing strength even under high dynamic loads.

•Acetalbearingcagetopreventball-to-ball friction and to reduce weight.

•Glassfibrereinforcedcomposite.

ball beaRing blOck

40

High load

Static load

Dynamic load

Low loadBBB 40

Actualsize

BBB 40Double loop head

BBB 40Double loop head becket

For more information about dimensioning, see page 90.

40

Page 41: Seldén Deck Hardware Version 6 | lmarinerigging.com

P

y

q

tw e

{

u

}

i o

r

BBB 40Triple swivel cam

BBB 40Single tie on

BBB 40Fiddle swivel/fixed, cam

BBB 40Fiddle swivel/fixed, becket cam

BBB 40

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

404-101-01R Singleswivel/fixed 55 250 500 10 4

404-101-02R Single strap 45 250 500 10 –

404-101-03R Singleswivel/fixed, becket 60 250 500 10 4

404-101-04R Singleswivel/fixed, cam 100 90* 180 7 4

404-101-05RSingleswivel/fixed, becket cam

104 180* 360 7 4

404-101-06R Double loop head 98 500 1000 10 –

404-101-07R Double loop head becket 102 500 1000 10 –

404-101-08R Triple swivel 168 750 1500 10 5

404-101-09R Triple swivel becket 171 750 1500 10 5

404-101-10R Triple swivel cam 216 450* 900 7 5

404-101-11R Triple swivel becket cam 220 540* 1080 7 5

404-101-12R Fiddle,swivel/fixed 66 250 500 10 4

404-101-13R Fiddleswivel/fixed, becket 70 250 500 10 4

404-101-14R Fiddleswivel/fixed, cam 107 250 500 7 4

404-101-15RFiddleswivel/fixed, becket cam

115 250 500 7 4

404-101-16R Single tie on 48 250 500 10 -

404-101-17R Single cheek 49 250 500 10 2xM5(notincluded)

404-101-20R Single becket strap 50 250 500 10 -

404-101-22R Single through deck 53 250 500 10 2xM5(not

included)

404-101-23R Single lead 42 250 500 10 2xM5(notincluded)

404-101-24RDouble through deck 93 250 500 10 2xM5(not

included)

BBB 40Fiddle swivel/fixed

BBB 40Single becket strap

BBB 40Fiddle swivel/fixed, becket

BBB 40Triple swivel becket cam

BBB 40Single cheek

Q

W

E

R

T

Y

U

I

O

P

{

r

}

t

q

y

w

u

e

i

o*Safeworkingloadbasedoncamcleat433-201-01.

BBB 40Single lead

BBB 40Double through deck

BBB 40Single through deck

41

Page 42: Seldén Deck Hardware Version 6 | lmarinerigging.com

WQ

E R

HIGH LOAD BBB 25 Single becket

HIGH LOAD BBB 25 Single pin

HIGH LOAD BBB 25 Single

HIGH LOAD BBB 25 Single loop

High load

Static load

Dynamic load

Low load

HIGH LOAD BBB 25

seldén high lOad ballbeaRingblOck

25Actualsize

42

Page 43: Seldén Deck Hardware Version 6 | lmarinerigging.com

YT

U I

Q

W

E

R

T

Y

U

I

HIGH LOAD BBB 25 Triple becket

HIGH LOAD BBB 25 Triple

HigH load BBB 25

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

402-201-04R Single, loop 36 400 800 5

402-201-05R Single 30 400 800 5

402-201-06R Single pin 32 400 800 5

402-201-07R Single becket 34 400 800 5

402-201-08R Double 58 400 800 5

402-201-09R Double becket 62 400 800 5

402-201-10R Triple 84 400 800 5

402-201-11RTriple becket 86 400 800 5

TECHNICAL FEATURES HIGH LOAD BBB 25

• Stainless steel sides to ensure high strength and stiffness.

•Onerowofstainlesssteelballbearings.•Ballcagetoreduceball-to-ballfrictionandweight.

APPLICATIONS

•Halyards•Tackles•Runners

HIGH LOAD BBB 25 Double

HIGH LOAD BBB 25 Double becket

High load BBB 25 Purchase 3:1

43

Page 44: Seldén Deck Hardware Version 6 | lmarinerigging.com

WQ

E R

seldén high lOadplain beaRing blOcks45/60/ 80/100

HIGH LOAD PBB 80 HIGH LOAD PBB 100

HIGH LOAD PBB 60HIGH LOAD PBB 45

High load

Static load

Dynamic load

Low loadHIGH LOADPBB

44

Page 45: Seldén Deck Hardware Version 6 | lmarinerigging.com

B1

B2

Q

W

E

R

HIGH LOAD PBB

These blocks are optimised for wires or Dyneema/Spectra core.

TECHNICAL FEATURES

•Stainlesssteel,electropolishedcheeks, anodised aluminium sheave and polymer plain bearing bushing.

•Outersideplatestoincreasebreakingload – but still optimising the weight.

•ThesheaveisV-shapedforwires.Light holes to reduce weight.

•Twopolyamidewashersonpin/bushing to reduce play between wire terminal and cheeks.

APPLICATIONS

•Designedforwireapplications subject to rig loads, e.g. backstays.

Art. No. Description Weight(g)

Width B1 (mm)

Width B2

(mm)Pin Ø(mm)

Safe working load (kg)

Breaking load (kg)

Max wire size (mm)(Backstay)

404-201-01R 45 88 9.5 - 810(incl. bush)

1100 2200 5

406-101-01R 60 192 12.5 8.5 810(incl. bush)

1500 3000 6

408-101-01R 80 479 15.5 10.7 12.7 2750 5500 8

410-101-01R 100 812 15.5 12.5 16 4000 8000 10

HigH load PBB 45/60/80/100

High load PBB 60

45

Page 46: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

E

W

YT

R

seldénRaTcheT blOcksaRb 45MRb 60

High load

Static load

Dynamic load

Low load

For dinghy main or spinnaker sheets. Makesiteasytoadvance your grip when hauling in the sheet.Alsoeasierforaperson holding the sheet. The perfect combi nation of control and convenience.

MRB 60Single

MRB 60Single becket

MRB 60Single cheek, clockwise

MRB 60Single cheek, anti clockwise

MRB 60Fiddle

ARB 45Single

ARB 45. A special insert is used to locate the shackle at 0° or 90°. When removed the shackle spins freely.

MRB 60Single becket

MRB 60Single cheek, clockwise

MRB 60Single cheek, anti clockwise

MRB 60Fiddle

Fixed or swivelling shackle

46

Page 47: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

W

E

R

T

Y

TECHNICAL FEATURES ARB 45

•Ø5mmDelrinballbearingsand Ø45mmcarbonfibrereinforcedpolyetherimide sheave.

•Thesheaveautomaticallychangesfrom free-turning to ratchet when the load increases. The sailor decides when the automatic ratchet kicks in. The switch-over point is set using an allen key to adjust a screw inside the sheave. Fast, simple, precise.

APPLICATIONS

•Dinghymainsheets.•Dinghyspinnakersheets

Automatic ratchet block, low load. When the block is low-loaded the ratchet mechanism is disengaged and the sheave spins free.

Automatic ratchet block, high load. When the load on the block increases the ratchet engages and the sheave is locked in one direction.

automatic RatcHet Block, aRB 45

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

404-401-01R Single 64 150 300 8 4

maNual RatcHet Block, mRB 60

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load (kg)

Max line size (mm)

Shackle (Ø mm)

406-301-01R Single 192 250 500 10 5

406-301-02R Single becket 127 250 500 10 5

406-301-05RSingle cheek, clockwise

87 250 500 10 3xM6(notincluded)

406-301-06RSingle cheek, anti clockwise

87 250 500 10 3xM6(notincluded)

406-301-07R Fiddle 142 250 500 10 5Manual ratchet block 60. The grey switch is used to turn the ratchet function on/off.

Use allen key to adjust the sensitivity of the automatic ratchet.

TECHNICAL FEATURES MRB 60

•Ø5mmDelrinballbearingsand Ø60mmcarbonfibrereinforcedpolyetherimide sheave.

•Manualswitchforeitherratchetfunction or free-turning.

47

Page 48: Seldén Deck Hardware Version 6 | lmarinerigging.com

seldén TRACKs And TRAVelleRs

TRACKSpages 50-51

TRAVELLER SYSTEM 22pages 54-55

TRAVELLER SYSTEM 30pages 56-59

TRAVELLER SYSTEM 30 PERFORMANCEpages 62-65

TRAVELLER SYSTEM 42pages 60-61

COMBINATIONSpages 66-70

CONTROL LINESpage 71

COMPLETE MAIN SHEET SYSTEMSpage 72

TACKLESpage 73

48

Page 49: Seldén Deck Hardware Version 6 | lmarinerigging.com

Seldén’s tracks and travellers are designed with the same passion for sailing and attention to detail that has become a hall mark for Seldén. The ability to easily adjust the position of a traveller contributes to efficient and pleasant sailing both for the racing sailor as well as for the sailor out there just for pure pleasure. You simply manage active sailing for a longer period of time, which naturally influence the boat speed in a positive way. Ergonomics and low friction are key words for these products.

The systems are available in three sizes 22, 30 and 42. System size selection is determined by boat size.For more information about dimensioning, see page 90.

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

49

Page 50: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

W

E

R

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

QWER

TRACKsYsTeM

223042

Art. no. DescriptionWidth x height

(mm)

Track Art. no.

164-481 Washer M5Sliding bolt 10x1.2 442-003-0X

164-482 Washer M6Sliding bolt 18x1.6 442-011-0X

443-003-0X

164-483 Washer M8Sliding bolt 24x2 443-011-0X

444-003-0X

164-484 Washer M10Sliding bolt 30x2.5 444-011-0X

sealing washerHex bolt

Washer

Sealing

Sealing

APPLICATIONS

The standard track is used for cars adjusted with •control lines and for self-tacking systems. The pinstop track is used for pinstop genoa cars. •Pinstop is a spring loaded plunger fixing the genoa car on the purpose made track. The car is easy to relocate when not under load. The high beam track is used for unsupported main •sheet systems and self tacking systems.

The bolt (DIN standard) is inserted in the track with the washer fitted. Sealing com-pound is applied between the flanges of the washer. The track turns up-side-down and is then mounted on deck.

Seldén tracks are available in three sizes. 22 mm, 30 mm and 42 mm width. Track size selection is deter-mined by boat size.

Width

Height

UPGRADING TO NEW TRACKS

The sliding bolt track is ideal for retrofit upgrades. The fasteners can be located according to the existing bolt holes. This track is also used for applications where the bolts are to be hidden.

For information about length of unsupported track, see page 94.

50

Page 51: Seldén Deck Hardware Version 6 | lmarinerigging.com

100 mm 50 mm

Y

X Y

X

Y

X

Y

XTRACK Standard22, 30, 42

TRACK Pinstop22, 30, 42

TRACK Sliding bolt22, 30, 42

TRACK High beam22, 30, 42

TraCK 22 TraCK 30 TraCK 42

Lengthmm

StandardArt. no.

PinstopArt. no.

Sliding boltArt. no.

High beamArt. no.

1000 442-001-01 442-002-01 - -

1200 442-001-02 442-002-02 - -

1500 442-001-03 442-002-03 - 442-011-03

2000 442-001-04 442-002-04 442-003-04 442-011-04

2500 442-001-05 442-002-05 - -

3000 442-001-06 442-002-06 442-003-06 -

3500 442-001-07 442-002-07 - -

4000 442-001-08 442-002-08 442-003-08 442-011-08

6000 442-001-09 442-002-09 - -

Weight Kg/m 0.43 0.40 0.45 1.07

Width/height mm 22/13 22/13 22/13 26/35

Wx/Wy cm3 0.57/0.38 0.57/0.38 0.64/0.36 2.10/2.76

Ix/Iy cm4 0.63/0.28 0.63/0.28 0.70/0.27 2.73/4.83

Screw size M5 M5 M6

Hole spacing 100 100 - -

Lengthmm

StandardArt. no.

PinstopArt. no.

Sliding boltArt. no.

High beamArt. no.

1000 443-001-01 443-002-01 - -

1200 443-001-02 443-002-02 - -

1500 443-001-03 443-002-03 - 443-011-03

2000 443-001-04 443-002-04 443-003-04 443-011-04

2500 443-001-05 443-002-05 - -

3000 443-001-06 443-002-06 443-003-06 -

3500 443-001-07 443-002-07 - -

4000 443-001-08 443-002-08 443-003-08 443-011-08

6000 443-001-09 443-002-09 - -

Weight Kg/m 0.89 0.86 0.81 2.62

Width/height mm 30/17 30/17 30/17 42/62

Wx/Wy cm3 1.66/1.07 1.66/1.07 1.59/0.92 8.4/12.9

Ix/Iy cm4 2.48/0.97 2.48/0.97 2.38/0.88 17.7/42.8

Screw size M6 M6 M8

Hole spacing 100 100 - -

Lengthmm

StandardArt. no.

PinstopArt. no.

Sliding boltArt. no.

High beamArt. no.

1000 - - - -

1200 - - - -

1500 444-001-03 444-002-03 - -

2000 444-001-04 444-002-04 444-003-04 444-011-04

2500 444-001-05 444-002-05 - 444-011-05

3000 444-001-06 444-002-06 444-003-06 -

3500 444-001-07 444-002-07 - -

4000 444-001-08 444-002-08 444-003-08 444-011-08

6000 444-001-09 444-002-09 - -

Weight Kg/m 1.65 1.65 1.65 4.47

Width/height mm 42/22 42/22 42/22 58/85

Wx/Wy cm3 4.47/2.62 4.47/2.62 4.43/2.35 19.2/33

Ix/Iy cm4 9.39/3.11 9.39/3.11 9.31/2.88 55.8/147

Screw size M10 M10 M8 M10

Hole spacing 100 100 - -

Fasteners not included.For curved tracks, please contact Seldén.

Width

Height

Width

Height

Width

Height

Width

Height

51

Page 52: Seldén Deck Hardware Version 6 | lmarinerigging.com

10°10°

70°

α = 110°

70°

a = 110°

sYsTeM

223042

The load on a genoa car depends on yacht’s power and the sheet angle. A big overlapping 150% genoa has a flat angle of approximately 45º, and a 110% high performance jib will have a steep angle close to 80º. All safe working loads for Seldén genoa cars are based on 70° sheet angle, which gives a total deflection angle (a) of 110º. All safe working loads on Seldén main cars and self tacking cars are based on 10° sheet angle.

When developing the Seldén range of tracks and travellers, function, reliability and ease of use has been our main focus. But we also made them appealing to the eye. They will enhance the performance, looks and the quality of any boat. Available for 20’ keelboats up to 65’ yachts.

APPLICATIONS

Main sheet systems•Genoa sheet systems•Self tacking systems•

LOADS

Max working load for end controls are in line with corresponding main sheet car or genoa car.

52

Page 53: Seldén Deck Hardware Version 6 | lmarinerigging.com

The high beam adaptor can be used to finish off a high beam track. It fits together with all the end controls and end stops.

Rubber shock absorber.

The sheave house on a genoa car articulates 40° sideways, 8° aft/forward and can also twist to a certain extent. This enables the sheave to align correctly with the sheet direction. This is of great importance, particularly when the track is fitted on a curved surface between deck and cabin side.

Plain bearing Acetal sheaves for control lines.

Black laquered aluminium or glass fibre reinforced composite with rubber shock absorbers and integral beckets for control lines. Plain bearing Acetal sheaves in the sheave house in composite and 3:1, 4:1 or 6:1 purchase depending on size of system. Available with or without integrated cam cleats.

The toggle and sheet block are supported by a rubber stand-up collar to improve function and eliminate rattling.

AISI 316 mirror finished stainless toggles for Seldén PBB and RBB blocks.

The main sheet car is black anodised, extruded aluminium and runs on Torlon® ball bearings.

The toggle and sheet block are supported by a rubber stand-up collar to improve function and eliminate rattling.

End controls come with plain bearing Acetal sheaves and 3:1 or 4:1 purchase.

Shaft in 30° angle to track.

Sliderods in composite for low friction.

Genoa car comes with integral becket and sheave for control line.

Integral becket for control line.

The pinstop function is a spring loaded plunger fixing the genoa car on the purpose made track. The car is easy to relocate when not under load.

...and open.Pinstop switch in locked position…

MAIN SHEET SYSTEM

GENOA SHEET SYSTEM

53

Page 54: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W

Y

U I

T

RE

SYSTEM 22Main car

SYSTEM 22Genoa car

SYSTEM 22Genoa car, pinstop

SYSTEM 22Genoa end control

SYSTEM 22End control

SYSTEM 22End control, cam cleat, port

SYSTEM 22Jib self tacking car

sYsTeM

22

Seldén system 22 is used for keelboats and yachts up to approximately 33’. See all combinations at pages 66-70. For more information about dimensioning, see page 91.

SYSTEM 22Main car with cam

20’

SYSTEM 22

33’

54

Page 55: Seldén Deck Hardware Version 6 | lmarinerigging.com

T

U

O

{

Y

I

P

}

q

Q

W

E

R

{ }P qO

SYSTEM 22End control with cheek

SYSTEM 22End stop self tacking

SYSTEM 22High beam adaptor

SYSTEM 22End control, cam cleat, starboard

SYSTEM 22End cap

SYSTEM 22

Art. no Description Weight(g)

Safe working load 1), 2)

(kg)

Breaking load 2)

(kg)

Length(mm)

Width (mm)

Purchase

442-111-01 Main car 386 700 1400 140 60 4:1

442-111-02 Main car with cam 3) 638 700 1400 250 60 5:1

442-101-01 Genoa car 410 550 1100 108 49 3:1

442-102-01 Genoa car, pinstop 401 550 1100 99 49 -

442-139-01 Self tacking car 223 700 1400 90 60 -

442-103-01 Genoa end control 4) 60 - - 64 30 4:1

442-112-01 End control 4) 104 - - 89 39 4:1/5:1

442-112-02 End control, cam cleat, port 4) 169 - - 89 85 4:1/5:1

442-112-03End control, cam cleat starboard 4)

169 - - 89 85 4:1/5:1

442-112-04 End control with cheek 4) 85 - - 89 39 2:1/3:1

442-105 End cap 4) 16 - - 35 33 -

442-138-01 End stop self tacking 4) 23 - - 51 40 -

442-135 High beam adaptor 19 - - 41 28 -

1) 70°sheet angle on genoa car. 2) Max working load for end controls are in line with corresponding main sheet car or genoa car. See system pages 66-70. 3) Fits only single, fiddle and becket blocks. 4) Fasteners not included. For more information about fasteners, see page 97.

When to use which end fitting: End controls for control lines and end stops with rubber shock absorbers. The function of the end cap is to keep the car on the track and to finish off the track.

TECHNICAL FEATURES SYSTEM 22

The main sheet car and the self-tacking car are •black anodised, extruded aluminium. They run on Torlon® ball bearings. The genoa car is black laquered aluminium with •sliderodsEnd fittings are glass fibre reinforced composite with •rubber buffer bearings. Ø30/40 mm plain bearing Acetal sheaves for •control lines. Genoa cars available for pinstop operation and for •control lines.AISI 316 mirror finished stainless toggles suit •Seldén PBB50 blocks and the MRB 60 block. The toggle / sheet block is supported by a rubber •stand-up collar. Ø50 mm plain bearing Acetal sheave in the •genoa car.Genoa car and end controls come with integral •beckets for control lines. Suitable max size of control line is Ø8 mm.•End controls with Cam cleat 27, control line Ø7 mm. •

Main sheet system

55

Page 56: Seldén Deck Hardware Version 6 | lmarinerigging.com

RE

Y I

T

U

WQsYsTeM

30SYSTEM 30Main car

SYSTEM 30Sheet lead

SYSTEM 30Main car with cam

SYSTEM 30Genoa car high load

SYSTEM 30Genoa car

SYSTEM 30Genoa car ball bearing

SYSTEM 30Genoa car, pinstop

SYSTEM 30Genoa car high load, pinstop

Seldén system 30 is used for yachts up to approximately 45’. See all combinations at pages 66-70. For more information about dimensioning, see page 91.

SYSTEM 30

30’ 45’

Tilt-absorber 444-151-01 for genoa car, see page 68. This prevents the unloaded sheave house chafing on the coach roof side.

56

Page 57: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

E

T

U

W

R

Y

I

O

P

PO

SYSTEM 30Jib self tacking carSYSTEM 30Jib self tacking car

SYSTEM 30Double self tacking car

SYSTEM 30Double self tacking car

sYsTeM 30

Art. no Description Weight(g)

Safe working load 1)

(kg)

Breaking load (kg)

Length(mm)

Width (mm)

Purchase

443-101-01 Main car 627 1500 3000 164 78 4:1

443-101-02 Main car with cam 985 1500 3000 281 78 6:1

443-117-01 Genoa car 455 700 1400 107 60 3:1

443-126-01 Genoa car, pin-stop 432 700 1400 99 60 -

443-126-02 Sheet lead 435 700 1400 99 60 -

443-130-01 Genoa car high load 822 1000 2000 170 60 4:1

443-148-01 Genoa car ball bearing 790 1200 2400 180 78 4:1

443-151-01 Genoa car high load, pinstop 806 1200 2400 165 60 -

443-139-01 Self tacking car 403 1100 2200 117 78 -

443-139-02 Double self tacking car 929 2000 4000 237 78 -

1) 70°sheet angle on genoa car.

Genua car high load, pinstop.

TECHNICAL FEATURES SYSTEM 30

The main sheet car and the self-tacking car are •black anodised, extruded aluminium. They run on Torlon® ball bearings. The genoa car is either black laquered aluminium •with sliderods or an extruded and anodised aluminium car with Torlon® ballbearings. Ø40 mm plain bearing Acetal sheaves for control •lines. Genoa cars available for pinstop operation and •for control lines.Main sheet car with Cam cleat 38. •AISI 316 mirror finished stainless toggles for •Seldén PBB 60, PBB 70 and RBB 60 blocks. Double self-tacking car for PBB 80 and RBB 80.The toggle / sheet block is supported by a rubber •stand-up collar.Ø50/60 mm plain bearing Acetal sheave in the •genoa car.Genoa car and end controls come with integral •beckets for control lines. Suitable max size of control line is Ø8 mm.•

57

Page 58: Seldén Deck Hardware Version 6 | lmarinerigging.com

sYsTeM

30

Seldén system 30 is used for yachts up to approximately 45’. See all combinations at pages 66-70. For more information about dimensioning, see page 91.

TECHNICAL FEATURES SYSTEM 30 END FITTINGS

Black laquered aluminium or glass fibre •reinforced composite with rubber shock absorbers and integral beckets for control lines. Composite end caps. •Ø40 mm plain bearing Acetal sheaves in the •composite sheave house. Cam cleat 38 end controls.•

The high beam adaptor can be used to finish off a high beam track. It fits together with all the end controls and end stops.

Rubber shock absorber.

Integral becket for control line.

The purchase of the genoa control line is doubled when adding a block and a 2-p eye.

SYSTEM 30

30’ 45’

58

Page 59: Seldén Deck Hardware Version 6 | lmarinerigging.com

{

q

e

t

}

w

r

y

{

r

}

q

t

w

e

y

SYSTEM 30End control

SYSTEM 30End control, Port

SYSTEM 30End control, Starboard

SYSTEM 30Genoa end control

SYSTEM 30High beam adaptor

SYSTEM 30End stop self tacking

SYSTEM 30End control, single sheave

SYSTEM 30End cap

sYsTeM 30

Art. no. Description Weight(g)

Length(mm)

Width (mm)

Purchase

443-112-01 End control 225 99 52 4:1/5:1

443-112-02 End control, cam port 330 99 92 4:1/5:1

443-112-03 End control, cam starboard 330 99 92 4:1/5:1

443-112-04 End control, single sheave 206 99 52 2:1/3:1

443-124-01 Genoa end control 91 81 45 4:1

443-125 End cap 28 40 40 -

443-135 High beam adaptor 43 39 50 -

443-142-01End stop self tacking 74 61 52 -

When to use which end fitting: End controls for control lines and end stops with rubber shock absorbers. The function of the end cap is to keep the car on the track and to finish off the track.

Fasteners not included. For more information about fasteners, see page 97. Max working load for end controls are in line with corresponding main sheet car or genoa car. See system pages 66-70.

59

Page 60: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W

sYsTeM

42

SYSTEM 42Main car

SYSTEM 42Genoa car, pinstop

Seldén system 42 can be used for boats up to approximately 65'. See all combinations at pages 66-70. For more information about dimensioning, see page 91.

TECHNICAL FEATURES SYSTEM 42

The main sheet car and the self-tacking car are •black anodised, extruded aluminium. They run on Torlon® ball bearings. The genoa car is black anodized aluminium with •slide rods and pinstop operated.The sheave house of the genoa car is AISI 316 •mirror finished stainless steel. Ø50 mm plain bearing Acetal sheaves and •composite sheave houses for control lines. The Ø80 mm genoa sheave have plain bearings •for vertical loads and Torlon® ball bearings stabilize the sheave when subjected to side loads.Cam cleat 38 used on end controls. •AISI 316 mirror finished stainless toggles for •Seldén PBB 80 and RBB 80 blocks. Double self-tacking car for PBB 100.The toggle/sheet block is supported by a rubber •stand-up collar.End controls with rubber shock absorbers and •integral beckets for control lines. Suitable max size of control line is Ø10 mm.•

SYSTEM 42

40’ 65’

60

Page 61: Seldén Deck Hardware Version 6 | lmarinerigging.com

T

U

O

Y

I

P

{

Q

W

E

R

T Y

U I

RE

P {O

SYSTEM 42Self tacking car

SYSTEM 42End control

SYSTEM 42End control with cam, port

SYSTEM 42End control with cam, starboard

SYSTEM 42High beam adaptor

SYSTEM 42End control with cheek

SYSTEM 42End stop self tacking

SYSTEM 42End cap

SYSTEM 42Double self tacking car

sYsTeM 42

Art. no. Description Weight(g)

Safe working load 1) 2)

(kg)

Breaking load 2)

(kg)

Length(mm)

Width (mm)

Purchase

444-101-01 Main car 1400 2500 5000 249 98 4:1

444-151-01 Genoa car, pinstop 2050 2750 5500 220 69 -

444-139-01 Self tacking car 740 2000 4000 144 98 -

444-139-02 Double self tacking car 1728 4000 8000 294 98 -

444-112-01 End control 3) 510 - - 126 70 4:1/5:1

444-112-02 End control, with cam port 3) 626 - - 126 100 4:1/5:1

444-112-03 End control, with cam starboard 3) 626 - - 126 100 4:1/5:1

444-112-04 End control, with cheek 3) 440 - - 126 70 2:1

444-135 High beam adaptor 110 - - 64 70 -

444-138-01 End stop self tacking 3) 202 - - 78 70 -

444-127 End cap 38 - - 45 50 -

1) 70°sheet angle on genoa car. 2) Max working load for end controls are in line with corresponding main sheet car or genoa car. See system pages 66-70. 3) Fasteners not included. For more information about fasteners, see page 97.

To prevent over loading the system and to obtain the best function, use a foot block to lead the control line to the winch. Angle stop for genoa car

444-151-01, see page 68.

61

Page 62: Seldén Deck Hardware Version 6 | lmarinerigging.com

sYsTeM

30peRfoRMAnCe

APPLICATIONS

Main sheet systems•Genoa sheet systems•

Seldén system 30 Performance can be used for boats up to approximately 45'. When low friction and high purchase ratios are key requirements, this is the system to chose. An extra bonus is the sophisticated look created by a fine composition of black anodised aluminium, Torlon® ball bearings and stainless steel.

Control line led to a vertical lead block and further to a cam cleat.

The cam cleat angle can be fine tuned vertically and horizontally, leading the control line straight to the trimmer.

62

Page 63: Seldén Deck Hardware Version 6 | lmarinerigging.com

The sheave house on a genoa car articulates 40° sideways, 8° aft/forward and can also twist to a certain extent. This enables the sheave to align correctly with the sheet direction. This is of great importance, particularly when the track is fitted on a curved surface between deck and cabin side. The low pivot-point reduces side loads and makes it easier to move the car under load.

Stainless stand-up spring.

Integral becket for rubber cord or to connect two genoa cars.

Ball bearing end controls. The purchase can be 2:1, 4:1, 6:1 or 7:1.

Rubber bushing eliminates rattling.

Rubber shock absorbers.

Aluminium sheaves with Torlon® ball bearings.

Stainless toggle.

Stainless stand-up spring.

Low pivot point handles side loads and the sheave house articulates to align correctly with the sheet direction. Easy operation with low friction.

The main sheet sheave has a plain bearing for vertical loads and Torlon® ball bearings stabilize the sheave when subjected to side loads. This system is for German sheeting. The control systems has a 6:1 purchase and aluminium

sheaves with Torlon® ball bearings. This makes for low friction and excellent ergonomics and helps the trimmer to sail actively for long periods of time. When boat speed really counts, this is the way to go.

Integral becket for control lines.

The cam cleat is angled towards the trimmer and the angle can be fine tuned by using wedges, 433-216-01R. It also has a horizontal adjustment. This results in excellent ergonomics and helps the trimmer to sail actively for long periods of time.

MAIN SHEET SYSTEM

GENOA SHEET SYSTEM

63

Page 64: Seldén Deck Hardware Version 6 | lmarinerigging.com

T

O {

Y U I

P

W

RE

Q

SYSTEM 30 PERFMain car fix block

SYSTEM 30 PERFMain car fix block with cam

SYSTEM 30 PERFMain car with toggle

SYSTEM 30 PERFGenoa car with becket

SYSTEM 30 PERFGenoa car single sheave

SYSTEM 30 PERFEnd control double sheave

SYSTEM 30 PERFGenoa car fiddle sheave

SYSTEM 30 PERFGenoa car double sheave

SYSTEM 30 PERFEnd control single sheave

SYSTEM 30 PERFEnd control double fiddle sheave

SYSTEM 30 PERFMain car with toggle and cam

SYSTEM

30pErforMancE

Seldén system 30 Performance can be used for boats up to approximately 45'. See all combinations at pages 66-70. For more inform-ation about dimensioning, see page 91.

SYSTEM 30

30’ 45’

64

Page 65: Seldén Deck Hardware Version 6 | lmarinerigging.com

O

{

q

P

}

Q

W

E

R

T

Y

U

I

} q

SYSTEM 30 PErforMancE

Art. no. Description Weight(g)

Safe working load 1) 2)

(kg)

Breaking load 2)

(kg)

Length(mm)

Width (mm)

Purchase

443-301-01 Main car fix block 1140 1000 2000 164 78 6:1

443-301-02 Main car fix block with cam 1502 1000 2000 261 78 6:1

443-301-03 Main car with toggle 966 1500 3000 164 78 6:1

443-301-04 Main car with toggle and cam 1318 1500 3000 261 78 6:1

443-300-01 Genoa car single sheave 1063 1500 3000 203 78 2:1

443-300-02 Genoa car double sheave 1119 1500 3000 203 78 4:1

443-300-03 Genoa car with becket 1038 1500 3000 203 78 1:1

443-302-02 Genoa car fiddle sheave 1242 1500 3000 238 78 7:1

443-303-01 End control single sheave 215 - - 88 53 2:1/3:1

443-303-02 End control double sheave 274 - - 88 53 4:1/5:1

443-304-02 End control double fiddle sheave 373 - - 124 53 7:1/8:1

443-125 End cap 3) 28 - - 40 40 -

443-135 High beam adaptor 43 - - 39 50 -

Genoa car fiddle sheave. Main car fix block with cam

TECHNICAL FEATURES SYSTEM 30 PERFORMANCE

Torlon• ® ball bearing cars.All cars, end controls and sheave houses are •black anodised extruded aluminium.Ø30/40/50 mm trim sheaves with Torlon• ® ball bearings. Cam cleat 38 used for main sheet car and end •controls.The toggle/sheet block is supported by a rubber •stand-up collar.The main sheet sheave has a plain bearing for •vertical loads and Torlon® ball bearings stabilize the sheave when subjected to side loads. Ø60 mm plain bearing Acetal sheave in the •genoa car.Suitable max size of trim line is Ø8 mm.•AISI 316 mirror finished stainless toggles for •Seldén PBB 60, PBB 70 and RBB 60 blocks. End controls with rubber shock absorbers and •integral beckets for trim lines. Genoa car has an integrated becket for rubber •cord or to connect two cars. The sheave house of the genoa car is made of •AISI 316 mirror finished stainless steel.

1) 70°sheet angle on genoa car. 2) Max working load for end controls are in line with corresponding main sheet car or genoa car. See system pages 66-70. 3) Fasteners not included. For more information about fasteners, see page 97.

SYSTEM 30High beam adaptor

SYSTEM 30End cap Angle stop for genoa cars

443-300-01, 443-300-02, 443-300-03 and 443-302-02, see page 68.

65

Page 66: Seldén Deck Hardware Version 6 | lmarinerigging.com

Main SYSTEM 4:1

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 22 442-112-01 442-111-01 442-112-01

System 30 443-112-01 443-101-01 443-112-01

System 42 444-112-01 444-101-01 444-112-01

Main SYSTEM 4:1, wiTh caM clEaT

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 22 442-112-02 442-111-01 442-112-03

System 30 443-112-02 443-101-01 443-112-03

System 42 444-112-02 444-101-01 444-112-03

MainSYSTEM2230 30 pErforMancE

42

The control line is led to a separate cam cleat or winch, see page 61.

Operated with cam cleats fitted to the end controls. For example suitable for coach roof installations in combination with mid sheeted booms.

Hint! Let the main sheet control line be endless and lead it through two rings. Each ring is fitted to the rail with rubber cord, each side of the cockpit. This way the leeward end of the control line can be released from windward.

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

A single lead block fitted to the cockpit side directs the control line to the trimmer, who locks it in a cam cleat. A convenient and common way to handle the traveller on keel boats.

66

Page 67: Seldén Deck Hardware Version 6 | lmarinerigging.com

Main SYSTEM 4:1 Main SYSTEM PErforMancE 6:1, fixEd block

Main SYSTEM PErforMancE 6:1

Size End controlArt. no.

Main carArt. no.

End controlArt. no.*

System 22 442-112-04 442-111-01 442-112-04

System 30 443-112-04 443-111-01 443-112-04

System 42 444-112-04 444-101-01 444-112-04

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 30Performance

443-303-02 443-301-01 443-303-02

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 30Performance

443-303-02 443-301-03 443-303-02

Main SYSTEM 5:1/6:1, caM clEaT on car Main SYSTEM PErforMancE 6:1,

caM clEaT fixEd blockMain SYSTEM PErforMancE 6:1, caM clEaT TogglE

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 22 442-112-01 442-111-02 442-112-01

System 30 443-112-01 443-101-02 443-112-01

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 30Performance

443-303-02 443-301-02 443-303-02

Size End controlArt. no.

Main carArt. no.

End controlArt. no.

System 30Performance

443-303-02 443-301-04 443-303-02

The cam cleat is angled towards the trimmer and the angle can be fine tuned by using wedges, 433-216-01R, see page 77. It also has a horizontal adjustment. This makes for excellent ergonomics and helps the trimmer to sail actively for long periods of time. This system is for German sheeting.

Lead block and cam cleat to be mounted separately in cockpit, see page 66.

This system is for German sheeting. Lead block and cam cleat to be mounted separately in the cockpit, see page 61 and 66.

Lead block and cam cleat to be mounted separately in the cockpit. The toggle is suitable for PBB 60, PBB 70 and RBB 60 blocks.

The cam cleat is angled towards the trimmer and the angle can be fine tuned by using wedges, 433-116-01R and 433-216-01R, see page 77.

The cam cleat is angled towards the trimmer and the angle can be fine tuned by using wedges, 433-216-01R, see page 77. It also has a horizontal adjustment. This ma-kes for excellent ergonomics and helps the trimmer to sail actively for long periods of time. The toggle is suitable for PBB 60, PBB 70 and RBB 60 blocks. Cam cleats angle adjustment, see page 62.

For a complete system, track and control line must be added. See pages 51 and 71.

67

Page 68: Seldén Deck Hardware Version 6 | lmarinerigging.com

gEnoa SYSTEM 3:1, Sliding rodS

gEnoa SYSTEM Pin SToP, Sliding rodS

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 22 442-103-01 442-101-01 442-105

System 30 443-124-01 443-117-01 443-125

SizeForward End stopArt. no.

Genoa carArt. no.

Aft End stopArt. no.

System 22 442-105 442-102-01 442-105

System 30 443-125 443-126-01 443-125

443-151-01

System 42 444-127 444-151-01 444-127

gEnoaSYSTEM2230 30 pErforMancE

42 Pin stop track to be used

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

TilT-abSorbEr for gEnoa carS

Art. No. Description Consists of Fits cars

443-155-01RGenoa tilt-absorber

2 x Tilt-absorber 3 x Screw M3x4 3 x Screw M4x5

443-148-01, 443-300-01, 443-300-02, 443-300-03, 443-302-02, 444-151-01

The tilt-absorber prevents the unloaded sheave house to chafe on the coach side.

68

Page 69: Seldén Deck Hardware Version 6 | lmarinerigging.com

gEnoa SYSTEM 4:1, Sliding rodS gEnoa PErforMancE SYSTEM 2:1, ball bEaring

gEnoa PErforMancE SYSTEM 4:1, ball bEaring

gEnoa PErforMancE SYSTEM 7:1, ball bEaring

gEnoa SYSTEM 4:1, ball bEaring

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 30 443-112-01 443-130-01 443-125

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 30Performance

443-303-01 443-300-01 443-125

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 30Performance

443-303-02 443-300-02 443-125

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 30Performance

443-304-02 443-302-02 443-125

SizeForward

End controlArt. no.

Genoa carArt. no.

AftEnd stopArt. no.

System 30 443-112-01 443-148-01 443-125

Genoa car + sheet lead.The sheet lead is used to lead the sheet correctly to a winch with a shallow angle. Sheet lead 442-136/443-136 fits all systems, see page 84.

Genoa car and genoa car with becket. Two cars connected on a long track allow the new sheet to be set and the car correctly positioned before sail changes. A cable or line connects the cars. Genoa car with becket, 443-300-03, connects to all System 30 Performance genoa cars, see page 64.

Genoa car and genoa sheet lead car. The sheet lead car is used to lead the sheet correctly to a winch with a steep angle. System 30 genoa sheet lead car, 443-126-02, see page 57.

For a complete system, track and control line must be added. See pages 51 and 71.

69

Page 70: Seldén Deck Hardware Version 6 | lmarinerigging.com

SElf Tacking SYSTEM

SElf Tacking doublE SYSTEM

Size End stopArt. no.

Self tacking car

Art. no.

End stopArt. no.

System 22 442-138-01 442-139-01 442-138-01

System 30 443-142-01 443-139-01 443-142-01

System 42 444-138-01 444-139-01 444-138-01

Size End stopArt. no.

Self tacking car

Art. no.

End stopArt. no.

System 30 443-142-01 443-139-02 443-142-01

System 42 444-138-01 444-139-02 444-138-01

SElfTackingSYSTEM2230 42A self-tacking system makes life on board a lot easier, in particular for short handed crews. The jib sheet is led to a car which moves to leeward during the tack with unchanged sheet load. Tacking is simply done by steering the boat through the wind. Seldén provide tracks curved to suit the particular boat, with end stops and cars.

The cars run on Torlon® ball bearings and the end stops have rubber shock absorbers.

Self tacking system 30 with PBB 60 single becket, see page 21.

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

70

Page 71: Seldén Deck Hardware Version 6 | lmarinerigging.com

conTrol linE

TECHNICAL FEATURES CONTROL LINE

24-braided line•Line size Ø7 mm•Black, red, blue, grey or white •

Seldén control lines make the system complete. They are cut to length, neatly packed, available in five colours and suit all sizes of track systems, BBB 30/BBB 40 blocks and cam cleat 27/38.

REQUIRED LENGTHMain traveller L= track length x purchase + 4m

Genoa CarsL=track length x purchase+ length from forward end of track to cam cleat + 1 m.

Art. no. Description Length (mm)

400-501-09 Red 9000

400-501-12 Red 12000

400-501-15 Red 15000

400-501-18 Red 18000

Art. no. Description Length (mm)

400-500-09 Black 9000

400-500-12 Black 12000

400-500-15 Black 15000

400-500-18 Black 18000

Art. no. Description Length (mm)

400-502-09 Blue 9000

400-502-12 Blue 12000

400-502-15 Blue 15000

400-502-18 Blue 18000

Art. no. Description Length (mm)

400-503-09 Grey 9000

400-503-12 Grey 12000

400-503-15 Grey 15000

400-503-18 Grey 18000

Art. no. Description Length (mm)

400-504-09 White 9000

400-504-12 White 12000

400-504-15 White 15000

400-504-18 White 18000

CONTROL LINE, BLACK CONTROL LINE, RED CONTROL LINE, BLUE CONTROL LINE, GREY CONTROL LINE, WHITE

71

Page 72: Seldén Deck Hardware Version 6 | lmarinerigging.com

E

Q W

Q

W

E

SYSTEM 30

30’ 45’

20’

SYSTEM 22

33’

SYSTEM 42

40’ 65’

coMplETE Main ShEETSYSTEMS

Art. No. Description Consists of Line

400-022-01R Main sheet system 22, 4:1 442-001-02 442-111-01 442-112-02 442-112-03

Track 22, M5, L=1200 mm Main sheet car 22 End control port/cam 22 End control starboard/cam 22

400-500-09 Control line, black Ø7 L=9000 mm

400-030-01R Main sheet system 30, 4:1 443-001-03 443-101-01 443-112-02 443-112-03

Track 30, M6, L=1500 mm Main sheet car 30 End control port/cam 30 End control starboard/cam 30

400-500-09 Control line, black Ø7 L=9000 mm

400-030-04R Main sheet system 30 High beam, 4:1 443-011-03 443-101-01 443-112-02 443-112-03 443-135

Track 30, High beam L=1500 mm Main sheet car 30 End control port/cam 30 End control starboard/cam 30 2 x High beam adaptor 30

400-500-09 Control line, black Ø7 L=9000 mm

Upgrading to a modern, smooth operating mainsheet system is easy. All our kits are complete including track, end controls, traveller and control lines.

72

Page 73: Seldén Deck Hardware Version 6 | lmarinerigging.com

Art. No. Description Block Line

400-004-01R Tackle 4:1 BBB40, Kick/aft 404-101-03 404-101-12 404-101-01

Single swivel/fixed becket Fiddle swivel/fixed Single swivel/fixed

400-503-12 Line, grey Ø7 L=12000 mm

400-005-01R Tackle 4:1 PBB50, Kick/aft 405-001-02 405-001-11 405-001-01

Single becket Fiddle Single

612-043-110

Line, grey Ø8 L=10000 mm

400-006-01R Tackle 4:1 PBB60, Kick/aft 405-001-02 406-001-11 405-001-01

Single becket Fiddle Single

612-053-112 Line, grey Ø10 L=12000 mm

Art. No. Description Block Line

400-004-04R Tackle 6:1 BBB40, Cam 404-101-08 404-101-11

Triple swivel Triple swivel becket cam

400-503-18 Line, grey Ø7 L=18000 mm

400-005-04R Tackle 6:1 PBB50, Cam 405-001-07 405-001-10

Triple Triple becket cam

612-053-130 Line, grey Ø10 L=30000 mm

400-006-04R Tackle 6:1 PBB60, Cam 406-001-07 406-001-10

Triple Triple becket cam

612-053-130 Line, grey Ø10 L=30000 mm

Art. No. Description Block Line

400-004-02R Tackle 4:1 BBB40, Cam 404-101-12 404-101-15

Fiddle swivel/fixed Fiddle swivel/fixed becket cam

400-503-12 Line, grey Ø7 L=12000 mm

400-004-03R Tackle 4:1 BBB40, Cam 404-101-12 404-101-15

Fiddle swivel/fixed Fiddle swivel/fixed becket cam

400-503-18 Line, grey Ø7 L=18000 mm

400-005-02R Tackle 4:1 PBB50, Cam 405-001-14 405-001-11

Fiddle becket cam Fiddle

612-043-110 Line, grey Ø8 L=10000 mm

400-005-03R Tackle 4:1 PBB50, Cam 405-001-11 405-001-14

Fiddle Fiddle becket cam

612-053-120 Line, grey Ø10 L=20000 mm

400-006-02R Tackle 4:1 PBB60, Cam 406-001-14 406-001-11

Fiddle becket cam Fiddle

612-053-112 Line, grey Ø10 L=12000 mm

400-006-03R Tackle 4:1 PBB60, Cam 406-001-14 406-001-11

Fiddle becket cam Fiddle

612-053-120 Line, grey Ø10 L=20000 mm

TacklES 4:1 Operation from the cockpit

TacklES 6:1 Cam cleat operated. Used as kicker tackle, main sheet or backstay adjustment

TacklES 4:1 Cam cleat operated. Used as kicker tackle, main sheet or backstay adjustmentTacklESUsing ready made tackles is an easy way to make noticeable improvements to func-tion and looks on board. The line is a grey coloured, 24-plait Polyester line sewed to the block.

73

Page 74: Seldén Deck Hardware Version 6 | lmarinerigging.com

SELDÉNCLEATS & SwivELS

Valley cleat, pages 78-79

Cam cleat,pages 76-77

Swivels,pages 80-81

74

Page 75: Seldén Deck Hardware Version 6 | lmarinerigging.com

CLEATS

Seldén produces Cam cleats in two sizes, together with all necessary accessories for efficient line handling. Valley cleats are also available in various sizes and for a wealth of different functions.

SWIVELS

The swivel range comprises deck swivels, mast swivels and eye swivels. The eye swivel features a new unique combination of ball bearing (to improve stability) and plain bearing (to obtain optimal friction reduction).

The ten-step adjustment of the deck swivel is also unique, as are the horizontal angle adjustment and friction adjustment features.

Stainless steel ball bearings

Stop screws

Composite cam cleat 27

Composite arm

Stainless steel eye

Cam cleats with fairleads. Eye swivel

75

Page 76: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

W

E

CAM CLEAT 27CAM CLEAT 38 COMPOSITECAM CLEAT 38 ALUMINIUM

TOP GUIDE 27TOP GUIDE 38

FAIRLEAD 27FAIRLEAD 38

CAm CLEATS

Seldén cam cleats are made of carbon fibre reinforced polyether imide. This material is selected for its high resistance to friction heat. There is also a hard anodised aluminium version of cam cleat 38 available. The cleats have a compact design in order to save space.

76

Page 77: Seldén Deck Hardware Version 6 | lmarinerigging.com

U I O

R T Y

Q

W

E

R

T

U

Y

I

O

Q

Q

W

E

R

T

Y

U

I

O

Cam Cleat 27Rope capacity 3-7 mm. Hole spacing c-c 27 mm.

Art. No. Description Weight(g)

Safe working load (kg)

433-101-01R Cam cleat 27Composite 15 90

433-108-01R Top guide 27 3 –

433-110-01R Fairlead 27 14 –

433-115R Riser 27 9 –

433-116-01R Wedge kit 27 5 –

433-118R Nut recess 27 3 –

433-119-01R Bull’s eye 27 6 –

433-113-01R Line guide 27 4 –

319-844Curved base 27 1 –

RISER 27RISER 38

WEDGE KIT 27WEDGE KIT 38

bULL’S EyE 27bULL’S EyE 38

NUT RECESS 27NUT RECESS 38

LINE GUIDE 27LINE GUIDE 38

CURVED bASE 27CURVED bASE 38

Cam Cleat 38Rope capacity 4-12 mm. Hole spacing c-c 38 mm.

Art. No. Description Weight(g)

Safe working load (kg)

433-201-01R Cam cleat 38 Composite 32 120

433-301-01R Cam cleat 38Aluminium 57 180

433-208-01R Top guide 38 9 –

433-210-01R Fairlead 38 37 –

433-215R Riser 38 21 –

433-216-01R Wedge kit 38 15 –

433-414R Nut recess 38 5 –

433-219-01R Bull’s eye 38 16 –

433-213-01R Line guide 38 11 –

319-823Curved base 38 3 –

Cam cleat with top guide.

77

Page 78: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q

R

U

P

W

T

I

{

E

Y

O

}

Roller for lines coming from below (230) AL

Quick lock and release function for trapeze or vang (253) AL

Fine line application in sail, starboard (258) AL

Standard (201) PA

Fairlead (211 Mk2) AL

Rope entry from port (218 Mk1) AL

Standard (222) AL

”Fairlead. End of rope can be fixed under the cleat” (270) AL

Rope entry from port (218 Mk2) AL

Fairlead (211 Mk1) AL

Rope entry from starboard (217 Mk1) AL

Roller for lines coming from above (236) ALVALLEy CLEATS

This type of cleat is available in several versions for many different applications. Countersunk head screws or bolts of the recommended size should be used. The polyamide cleat is ideal for low load applications whereas the aluminium cleats prevent rope burn under higher load.

Seldén valley cleats are designed and produced by Clamcleat Ltd, UK.

vALLEY CLEATS

78

Page 79: Seldén Deck Hardware Version 6 | lmarinerigging.com

y

[ ]

u

w

i

eq

o p

r

t

Tapered pad. Aids rope alignment for 432-023 PA

Sail Line Starboard (CL241) AL

”Tapered pad. Aids rope alignment for 432-012, 432-015, 432-016, 432-018, 432-026” (818) PA

”Tapered pad. Aids rope alignment for 432-014, 432-025” (823) PA

Tapered pad. Aids rope alignment for 432-011 (802) PA

Standard (254) AL Fairlead (211 Mk2S2) AL

Fine line application in sail, port (259) AL

”Fairlead. End of rope can be fixed under the cleat” (704) AL

”Tapered pad. Aids rope alignment for 432-013, 432-024, 432-017” (819) PA

Sail Line Port (CL273) AL

Fairlead (268) AL

Art. No. Description(Clamcleat art.no.)

Weight(g)

Rope capacity

(mm)Bolt

Hole spacing c-c, (mm)

432-010R Standard (201) PA 43 6-12 M6 72

432-011R Standard (222) AL 16 1-6 M4 36

432-012R Fairlead (211 Mk1) AL 35 1-6 M5 66

432-013R Fairlead (211 Mk2) AL 23 1-6 M4 27

432-014R ”Fairlead. End of rope can be fixed under the cleat” (270) AL 13 1-6 M3 24

432-015R Rope entry from starboard (217 Mk1) AL 30 1-6 M5 66

432-016R Rope entry from port (218 Mk1) AL 30 1-6 M5 66

432-017R Rope entry from port (218 Mk2) AL 24 1-6 M4 27

432-018R Roller for lines coming from above (236) AL 40 1-6 M5 66

432-019R Roller for lines coming from below (230) AL 35 1-6 M5 66

432-020R Quick lock and release function for trapeze or vang (253) AL 46 4-8 - 70

432-021R Fine line application in sail, starboard (258) AL 19 3-6 M4 49

432-022R Fine line application in sail, port (259) AL 19 3-6 M4 49

432-023R Standard (254) AL 38 4-8 M5 55

432-024R Fairlead (211 Mk2S2) AL 21 1-6 M4 27

432-025R Fairlead (268) AL 11 1-6 M3 24

432-026R ”Fairlead. End of rope can be fixed under the cleat” (704) AL 34 1-6 M5 66

432-027R”Tapered pad. Aids rope alignment for 432-014, 432-025” (823) PA

4 - M3 -

432-028RTapered pad. Aids rope alignment for 432-011 (802) PA

4 - M4 -

432-029R”Tapered pad. Aids rope alignment for 432-013, 432-024, 432-017” (819) PA

8 - M4 -

432-030R Tapered pad. Aids rope alignment for 432-023 PA 8 - M5 -

432-031R

”Tapered pad. Aids rope alignment for 432-012, 432-015, 432-016, 432-018, 432-026” (818) PA

14 - M5 -

432-033R Sail Line Starboard (CL241) AL 16 3-6 M4 49

432-034R Sail Line Port (CL273) AL 16 3-6 M4 49

Valley Cleat

Q

W

E

R

T

Y

U

I

O

P

{

}

q

u

w

i

e

o

r

p

t

[

]

y

79

Page 80: Seldén Deck Hardware Version 6 | lmarinerigging.com

W

Q

EyE SWIVEL 27EyE SWIVEL 38

EyE SWIVELThe eye swivel is designed for control lines close to the deck, as with dinghy jib sheets. The swivel can also be used on bigger boats if the purchase of the tackle is sufficient. One eye swivel on each side of the coach roof is an ideal set-up for the vang. The crew on the rail can easily reach the vang to prevent a broach. The angle of articulation is easily adjusted with two screws. The swivel turns on stainless steel ball bearings for durability. The eye swivel is made of glass fibre filled polyamide with an electro polished, stainless steel line guide.

SWIVELS

Seldén provides three types of swivel – deck swivel, mast swivel and eye swivel.

DECk SwivEL 38EYE SwivEL 27/38 mAST SwivEL 27/38 DECK SWIVEL 38

80

Page 81: Seldén Deck Hardware Version 6 | lmarinerigging.com

E R

Q

W

W

E

R

MAST SWIVEL 38MAST SWIVEL 27 mAST SWIVEL The mast swivel leads the line with full articulation towards the trimmer. The swivel is made of glass fibre reinforced composite. It is mainly used for Cunningham, Spinnaker and Gnav etc. The sheave has two optional posi-tions, either for lines coming from above or from below. The mast swivel can be fitted “up-side-down” depending on desired orientation of the cam cleat. The sheave is of ball bearing type.

SwiVelS

Art. No. Description Weight(g)

Safe working load (kg)

max line size (mm)

433-401-01R Deck swivel 38 362 120 12

433-611-01R Eye swivel 27 113 90 7

433-611-02R Eye swivel 38 166 120 12

433-501-01R Mast swivel 27 104 90 7

433-501-02R Mast swivel 38 126 120 8

Horizontal articulation. The angle of horizontal movement is easily adjusted without taking the swivel apart. Two stops can be fixed in 5

different positions, from a fixed arm to 300° angle of movement.

Horizontal friction. The amount of friction for horizontal move ment is adjusted with a control knob. The knob is located in a recess in order to prevent accidental adjustment, but is still easy to reach with a screwdriver or similar tool.

Vertical articulation is easily adjusted from a flat horizontal lead to a steep 45° angle.

DECK SWIVEL The deck swivel articulates to follow the movements of the trimmer. Used for main sheets on keelboats and smaller yachts. Can also be used on bigger boats if the purchase of the tackle is sufficient. The materials used are composite and stainless steel. Recommended blocks are MRB60, PBB50 and PBB60. The block, without shackle, fits on the stainless steel axle.

81

Page 82: Seldén Deck Hardware Version 6 | lmarinerigging.com

Y

U

O

I

P

R

T

E

Q

W

SELDÉNDECk orgANizEr40/50

DECK ORGANIZER

Seldén deck organizers keep the deck tidy and lead the ropes back to the cockpit. The acetal sheaves have acetal ball bearings absorbing side loads from a rope entering the organizer with a vertical angle. The result is low friction making hoisting and trimming of sails fast and easy. The organizers can be fitted to a slightly curved surface and two organizers can be stacked on top of each other. The deck organizers are made of glass fibre reinforced composite.

DECK ORGANIZER

2 sheaves

DECK ORGANIZER

3 sheaves

DECK ORGANIZER

4 sheaves

DECK ORGANIZER

5 sheaves

DECK ORGANIZER

6 sheaves

82

Page 83: Seldén Deck Hardware Version 6 | lmarinerigging.com

~50%

~50%

P

F

F

P

F

F

Art. No. Description Weight(g)

Safe working load* (kg)

Breaking load*

(kg)

max line size (mm)

Fasteners

420-001-02R 2 sheaves 100 1000 2000 14 2xM6

420-001-03R 3 sheaves 154 1000 2000 14 3xM6

420-001-04R 4 sheaves 194 1000 2000 14 4xM6

420-001-05R 5 sheaves 238 1000 2000 14 5xM6

420-001-06R 6 sheaves 292 1000 2000 14 6xM6

Art. No. Description Weight(g)

Safe working load* (kg)

Breaking load*

(kg)

max line size (mm)

Fasteners

420-101-02R 2 sheaves 172 1400 2800 16 2xM8

420-101-03R 3 sheaves 258 1400 2800 16 3xM8

420-101-04R 4 sheaves 340 1400 2800 16 4xM8

420-101-05R 5 sheaves 420 1400 2800 16 5xM8

420-101-06R 6 sheaves 510 1400 2800 16 6xM8

DeCK ORGaNiZeRS Ø 40 mmHole spacing c-c 47 mm

DeCK ORGaNiZeRS Ø 50 mmHole spacing c-c 58 mm

Y

R

T

E

U

O

I

P

Q

W

Safe working load is stated at 90º angles. * Safe working load and breaking load is reduced 50% for an organizer stacked on top of another.

* Safe working load and breaking load is reduced 50% for an organizer stacked on top of another.

Two organizers can be stacked on top of each other. Safe working load is stated at 90º angles. Safe working load and breaking load is reduced 50% for an organizer stacked on top of another.

Ball bearing sheaves absorbing side loads. For hole patterns, see page 96.

Fit the organizers so that they align with the direction of the total load. For more information, see page 89.

83

Page 84: Seldén Deck Hardware Version 6 | lmarinerigging.com

Q W

Q

W

SELDÉN ComPLEmENTArYHArD wArE

SHeet leaD

Art. No. Dimension Weight(g)

Safe working

load (kg)*

Breaking load (kg)

max line size (mm) Bolts

442-136R c-c 35 23 700 1400 10 2xM6

443-136R c-c 40 56 1100 2200 12 2xM8

SHEET LEAD

Machined and black anodised sheet lead designed to lead lines over deck or to achieve correct angle to a winch. The smooth finish of this sheet lead gives minimal friction, allowing it to replace blocks in some applications. Works well as a lead on the windward spinnaker guy on boats up to 35’.

SHEET LEAD

84

Page 85: Seldén Deck Hardware Version 6 | lmarinerigging.com

T IQ Y

W

R

Y

Q

E

T

U

I

SNap SHaCKle aDaptORSDuplex 2205 stainless

SNAP SHACKLE ADAPTORS

A brilliant solution for any application you want to attach and remove quickly, for example runners and check stays. Just replace the standard shackle with a snap shackle.

SNAP SHACKLE/LEAD ADAPTOR FOR BARBER HAULER AND 2:1 PURCHASE

This new snap shackel has a big, well rounded loop allowing the rope to slide with low friction. Compared to a regular snatch block, this shackle is lighter, easier to operate and lower cost. Typical applications are barber haulers for spinnaker and jibs but also to tension a Seldén Code X with 2:1 purchase. This not only makes for better performance but it also makes it easier to connect the Seldén Code X to a bowsprit, from the foredeck. The shackle is made of high strength Duplex steel and has a quality mirror finish.

Art. No. Description Weight(g)

Safe working load (kg)

Breaking load(kg)

Combine with...

404-040-01R Snap shackle adaptor 40 25 550 1100 BBB 40

405-040-01R Snap shackle adaptor 50 60 900 1800 PBB 50

406-040-01R Snap shackle adaptor 60 96 1500 3000 PBB 60, PBB 70, RBB 60, Seldén CX15

408-040-01R Snap shackle adaptor 80 232 2500 5000 PBB 80, RBB 80, Seldén CX25

410-040-01R Snap shackle adaptor 100 490 4000 8000 PBB 100

307-436-01R Snap shackle/ lead adaptor 60 118 1500 3000 PBB 60, PBB 70,

RBB 60, Seldén CX15

307-437-01R Snap shackle/ lead adaptor 80 278 2500 5000 PBB 80, RBB 80,

Seldén CX25

307-438-01RSnap shackle/ lead adaptor 100 540 4000 8000 PBB 100

SNAP SHACKLE/ LEAD ADAPTOR

SNAP SHACKLE ADAPTOR

Snap shackle/lead adpator for barber hauler and 2:1 purchase

85

Page 86: Seldén Deck Hardware Version 6 | lmarinerigging.com

qI

{

O

P

I

}

q

Y

Q T

U

Q

W

E

R

T

RW

Y

U

StaND-Up SpRiNGStainless AISI 316

Art. No. Dimension Weight(g)

Combine with...

308-074R Ø36.5x70 19 PBB 50

308-085R Ø50x85 49PBB 60PBB 70 RBB 60

308-093R Ø60x100 76 PBB 80RBB 80

308-095R Ø72x145 153 PBB 100

403-123R Ø20/16-25 2 BBB 20BBB 30

433-411R Ø30/20-40 2 BBB 40

SELDÉN ComPLEmENTArYHArD wArE

STAND-UP SPRING

When supported by a stand-up spring, a deck mounted block is always ready for action.

FIxED PAD EyES

Forged and electro polished fittings to attach tackles, cascades, halyard blocks and plenty of other items.

FOLDABLE PAD EyES

These foldable padeyes are used to attach life lines, stay sail furlers, blocks for down haul and barber haulers just to give a few examples. To be able to fold down the eye when not in use is a blessing for bare feet crew members.

FiXeD paD eyeSStainless AISI 316

*When the padeye bail is aligned with direction of load.

Art. No. Dimension Weight(g)

Safe working load (kg)*

Breaking load(kg)

FastenersCombine with...

Block Stand-up spring

508-815R Ø50 74 1000 2000 2xM6 PBB 50 308-074R

508-816R Ø60 154 2000 4000 4xM6PBB 60PBB 70RBB 60

308-085R

508-817R Ø72 248 3000 6000 4xM8 PBB 80 308-093R

508-818R Ø86 460 4000 8000 4xM10 PBB 100 308-095R

508-347R 40x35 52 700 1400 4xM5 BBB 40 PBB 50 308-074R

FOlDable paD eyeSStainless AISI 316

Art. No. Dimension Weight(g)

Safe working load (kg)

Breaking load(kg)

Bolts

508-750-01R Ø6/42x42 74 1100 2200 3xM6

508-760-01R Ø8/54x54 154 2200 4400 3xM8

For hole patterns, see page 96.

86

Page 87: Seldén Deck Hardware Version 6 | lmarinerigging.com

E

I {

YR

O }

UT

P

Y

I

R

T

E

U

O

{

P

}

Q W

Q

W

Art. No. Dimension Weight(g)

Safe working load (kg)

Breaking load(kg)

Combine with...

307-004R Ø12x24x41 186 4000 8000 PBB 100

307-026R Ø8x16x35 56 1500 3000 PBB 70RBB 60

307-027R Ø10x19x41 126 2000 4000 PBB 80

307-080R Ø4 8 250 500 BBB 30 BBB 40

307-081R Ø5 16 700 1400 PBB 50BBB 40*

307-085R Ø8/10 76 2000 4000 PBB 80RBB 80

307-086R Ø6 26 1100 2200 PBB 60

307-097R Ø6/8 40 1500 3000 PBB 70RBB 60

307-098R Ø5x11x26 18 700 1400 PBB 50

307-099R Ø6x12x33 32 1100 2200 PBB 60

*Only used on BBB40 tripleMax working load/breaking load are valid when the shackle is fitted to appropriate Seldén block.

FORGeD SHaCKleSStainless AISI 316

SHACKLE Ø12

SHACKLE Ø6

SHACKLE Ø4SHACKLE Ø8

SHACKLE Ø6/8

SHACKLE Ø5SHACKLE Ø10

SHACKLE Ø5SHACKLE Ø8/10 SHACKLE Ø6

LUBRICATION

Lubrication for Torlon® ball bearings, Art. No. 312-534.One drop will do!

eye bOlt

Art. No. Dimension,bolt

Weight(g)

Safe working

load (kg)*

Breaking load (kg)

Combine with...

Block Stand up spring

508-352-01 M10x112 112 1000 2000 PBB 50 PBB 60 307-074R

508-357-01 M8x67 35 500 1000 BBB 40 PBB 50 -

87

Page 88: Seldén Deck Hardware Version 6 | lmarinerigging.com

a [°] k

0 2,00

10 1,99

20 1,97

30 1,93

40 1,88

50 1,81

60 1,73

70 1,64

80 1,53

90 1,41

100 1,29

110 1,15

120 1,00

130 0,85

140 0,68

150 0,52

160 0,35

170 0,17

180 0

400 kg

400 kg

100 kg

800 kg

100 kg

400 kg

200 kg

600 kg600

600 kg

100 kg

P

F = 100 kg F = 100 kg

LOADS

6:1 purchase with triple blocks.

4:1 purchase with fiddle blocks.

8:1 purchase with cascade of single blocks.

Breaking loads and safe working loadsBreaking loads

Our definition of a breaking load is that load which causes any part of a product to break when it is subjected to successively increasing loads during laboratory testing.

Safe working loads

Our definition of safe working load is set at half the breaking load. We guarantee that products subjected to loads that are below or up to this limit will function satisfactorily.

Loads in the specification tables

The breaking load and safe working load values shown in the product tables are for the product itself (not for the line). The load exerted on the product depends on the load in the line and on the deflection angle of the lines around the sheave.

PUrCHase sYsTeMsA mechanical system can be used to increase the effect of human force required for a specific situation. Such systems are designed in several ways. A selection of typical mechanical systems are shown to the right.

Selecting the correct product for a specific purpose and an expected load is the only way to ensure safe sail handling and high perform-ance. Always follow Seldén’s guidelines. If in doubt, please consult a Seldén dealer.

88

Page 89: Seldén Deck Hardware Version 6 | lmarinerigging.com

α/2 α/2

70°

α = 110°

~50%

~50%

P

F

F

P

F

F

The deflection angle must be the same on both sides to guarantee safe working load.

follow THe lineThe load (P) exerted on a product depends on the load in the line (F) and on the deflection angle (a) of the line around the sheave.

P = k x F P = the load on the block k = load factor, see table page 88. F = the load in the line

This applies to blocks, organizers and travellers.

CHoosing THe rigHT BloCk, exaMPle:Assume a halyard load of 800 kg. While the load in the line remains constant over its entire length, the load on the sheaves depends on the individual deflection angle.

Mast base blockF = 800 kg ablock = 90º k = 1.41 Pblock = k x F = 1.41 x 800 = 1128 kg

Deck organizerF = 800 kg aorg = 140º k = 0.68 Porg = k x F = 0.68 x 800 = 544 kg

The block is exposed to a load of 1128 kg which means a PBB 70 or RBB 60 will do the job. The deck organizer is exposed to a load of 544 kg which makes us choose the deck organizer size 40.

The selection of block in this example is based on strength requirement only. Wear and friction is not taken into consideration. There-fore a bigger size can sometimes be prefer-able, see dimensioning guidelines for your application.

CalCUlaTed load on a genoa Car, exaMPle:Safe working load for a Seldén genoa car is calculated with sheet angle of 70º, equal to a deflection angle of 110º. A high performance #3 Genoa might have a sheet angle up to 90º, which gives a deflection angle of 90º.

Example Assume a sheet load of 1000 kg and deflection angle 90°.

F = 1000 kg a = 90º a#3 Genoa = 110º k = 1.41/1.15 Pcar = k x F = 1.41/1.15 x 1000 = 1226 kg

Max load on the traveller is 1226 kg.

angles

F

F

POrg

PBlock

Block

Org / 2

Org / 2α

α

α

FF

89

Page 90: Seldén Deck Hardware Version 6 | lmarinerigging.com

E max

S

DimenSiOninG

RM 30º(kNm)

Displ.(tonnes)

6 1.28 1.6

10 2.012 2.414 2.816 3.218 3.620 4.025 5.030 5.735 6.340 7.045 7.750 8.255 9.060 1070 1180 1290 14

100 15110 16120 18130 19140 20150 22160 23

RBB 80 36' 52'

RBB 60 30' 43'

PBB 100 43'

PBB 80 34' 48'

PBB 70 30' 43'

PBB 60 27' 38'

PBB 50 23' 32'

BBB 40 16' 22'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

Main sHeeT BloCk, Mid sHeeTed BooM (s>50% of e)

RBB 80 42'

RBB 60 35' 50'

PBB 100 51'

PBB 80 39'

PBB 70 35' 50'

PBB 60 31' 45'

PBB 50 26' 38'

BBB 40 18' 26'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

Main sHeeT BloCk, end sHeeTed BooM (s>90% of e)The guidelines are based on strength, function, wear and friction for yachts up to RM=160 kNm (approx 55 feet). For larger yachts please contact your Seldén dealer.

To select the correct block, traveller and track you need to know:

E=foot length of the main sail.•

S=distance from aft side of the mast to the sheet •attachment.

If your boom is end sheeted or mid sheeted, i e the •relation between E and S.

The righting moment at 30°. If righting moment is •not available an approximation can be made from displacement (tonnes) or boat length (feet).

90

Page 91: Seldén Deck Hardware Version 6 | lmarinerigging.com

SYSTEM 42 43'

SYSTEM 30 Perf. toggle

35' 45'

SYSTEM 30Perf. fixed block

30' 43'

SYSTEM 30Standard

35' 44'

SYSTEM 22 27' 33'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

Main sHeeT Car, end sHeeTed BooM (s>0,9*e)

SYSTEM 42 39'

SYSTEM 30 Perf. toggle

32' 45'

SYSTEM 30Perf. fixed block

28' 40'

SYSTEM 30Standard

32' 44'

SYSTEM 22 24' 33'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

Main sHeeT Car, Mid sHeeTed BooM (s>0,50*e)

SYSTEM 42 40'

SYSTEM 30 Performance

34' 45'

SYSTEM 30 Ball bearing

32' 45'

SYSTEM 30 High load

30' 42'

SYSTEM 30 26' 37'

SYSTEM 22 24' 33'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

genoa sHeeT Car

SYSTEM 42 Double

40'

SYSTEM 42 Single

31' 44'

SYSTEM 30 Double

31' 44'

SYSTEM 30Single

25' 36'

SYSTEM 22 21' 30'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

self TaCking Car

91

Page 92: Seldén Deck Hardware Version 6 | lmarinerigging.com

Mast base block

RBB 80 36' 52'

RBB 60 30' 43'

PBB 100 43'

PBB 80 33' 48'

PBB 70 30' 43'

PBB 60 27' 38'

PBB 50 23' 32'

BBB 40 15' 22'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for sPinnaker HalYard, MasT Base

RBB 80 36' 51'

RBB 60 30' 42'

PBB 100 43'

PBB 80 33' 47'

PBB 70 30' 42'

PBB 60 26' 38'

PBB 50 22' 32'

BBB 40 15' 22'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for genoa HalYard, MasT Base

RBB 80 37' 53'

RBB 60 31' 44'

PBB 100 45' 64'

PBB 80 34' 49'

PBB 70 31' 44'

PBB 60 28' 39'

PBB 50 23' 33'

BBB 40 16' 23'

0 20 40 60 80 100 120 140 160

Min RM kNm Max RM

BloCk for Main HalYard, MasT Base

92

Page 93: Seldén Deck Hardware Version 6 | lmarinerigging.com

Topmast block

RBB 80 38' 54'

RBB 60 31' 44'

PBB 100 45'

PBB 80 35' 49'

PBB 70 31' 44'

PBB 60 28' 40'

PBB 50 23' 33'

BBB 40 16' 23'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for sPinnaker HalYard, ToPMasT

RBB 80 36' 51'

RBB 60 30' 42'

PBB 100 43'

PBB 80 33' 47'

PBB 70 30' 42'

PBB 60 26' 38'

PBB 50 22' 32'

BBB 40 15' 22'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for sPinnaker sHeeT and gUYLine will turn 180 degrees

RBB 80 32' 46'

RBB 60 27' 39'

PBB 100 38' 54'

PBB 80 30' 43'

PBB 70 27' 39'

PBB 60 25' 35'

PBB 50 21' 31'

BBB 40 15' 22'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for rodkiCker TaCkle

RBB 80 40'

RBB 60 33' 47'

PBB 100 48'

PBB 80 37' 53'

PBB 70 33' 47'

PBB 60 29' 42'

PBB 50 25' 36'

BBB 40 17' 24'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

BloCk for kiCking sTraP

RBB 80 31' 44'

RBB 60 26' 36'

PBB 100 37' 53'

PBB 80 28' 41'

PBB 70 26' 36'

PBB 60 23' 33'

PBB 50 19' 27'

BBB 40 13' 19'

0 20 40 60 80 100 120 140 160

RM 30º (kNm)

93

Page 94: Seldén Deck Hardware Version 6 | lmarinerigging.com

UnSUppOrteD trAckS

An unsupported high beam track will withstand the main sheet load if correctly dimensioned.

Max UnsUPPorTed lengTH, Usl

RM 30º kNm

HB 22USL (mm)

HB 30USL (mm)

HB 42USL (mm)

S=E S=0.5xE S=E S=0.5xE S=E S=0.5xE

5 866 800 1792 1540

10 800 500 1655 1310

15 727 375 1505 1195

20 613 305 1408 1120

30 462 235 1281 1016

40 378 1197 882

50 323 1137 755

60 284 1089 664

70 255 1051 600

80 232 1019 550

90 991 500 1495 1187

100 929 465 1459 1158

110 869 435 1427 1112

120 818 410 1398 1046

130 773 390 1372 989

140 734 365 1349 939

150 700 350 1327 895

160 1307 855

170 1289 820

180 1272 788

190 1256 758

200 1241 732

210 1227 707

220 1214 684

230 1201 663

240 1189 644

250 1178 626

260 1167 609

270 1157 593

280 1147 578

290 1128 564

300 1102 551

Unsupported length, USL

E = foot length of the main sail. S = distance from aft side of the mast to the sheet attachment.

94

Page 95: Seldén Deck Hardware Version 6 | lmarinerigging.com

B

A D

C

E

FØG

CD

AG

F

ØH

E

B

A

B

C

D

E

F (I)

ØH

ØG

Art. No. A B C D E F G ØH Fasteners

402-101-16R 37.5 15 26 17.5 29 12 6 4.2 2xM4

403-101-23R 47 19.5 37.5 24.5 34 15 5.5 5.2 2xM5

404-101-23R 62 23.5 47 30 45 20 7 5.2 2xM5

single lead

Art. No. A1) B C D E F ØG Fasteners

402-101-13R 14 35 20 20 5 - 4.2 2xM4

403-101-09R 18 53 30 30 8 - 4.2 2xM4

404-101-17R 22 66 38 40 8 - 5.5 2xM5

405-001-15/-16/-17R 25 79 45 50 9 15 5.2 1xM52) 2xM5

406-001-153)/-163)/-173)/-18/-19/-201)/-21/-221)R 30 95 54 60 11 19 6.2 3xM62)

408-001-154)/-18/-19/-201)/-21/-221)R 35 127 72 80 15 25 8.2 3xM82)

410-001-15R 39 148 78 100 20 30 10.5 3xM102)

406-201-07R 24 85 54 60 8 19 6.5 3xM62)

408-201-07R 28 114 72 80 11 25 8.5 3xM82)

CHeek BloCk

1) 406-001-20/-22R A=54, 408-001-20/-22R A=67. 2) Countersunk 3) 1xM6 countersunk, 2xM6 4) 1xM8 countersunk, 2xM8

Art. No. A B C D E F ØG ØH I1) Fasteners

402-101-17R 55 18 22 20 7 43.5 4.2 15 17 2xM42)

402-101-18R 75.5 18 51.5 20 7 63.5 4.2 15 36.5 2xM42)

403-101-22R 72 22 44 30 11 58 5.2 18 26 2xM5

403-101-24R 103 22 75 30 11 90 5.2 18 57 2xM5

404-101-22R 95 26 59 40 15 79 5.2 20 39 2xM5

404-101-24R 137 26 100 40 15 121 5.2 20 80 2xM5

THroUgH deCk

1) C-C of ØH. 2) Countersunk

HOLe pAttern

95

Page 96: Seldén Deck Hardware Version 6 | lmarinerigging.com

D EØ F

Ø A B

C

Ø C Ø D

A

B

BA

C

ØJ

EF

G

I

H

ØKD

A

C

B

90º

D

Art. No. A B ØC ØD Fasteners

433-611-01/-02R 13 120º 52 5.3 3xM5

eYe swiVel

Art. No. ØA B C D E ØF Fasteners

433-401-01R 68 50 20 17 32 5.2 4xM5

deCk swiVel

winCH feeder

fliP floP

Art. No. A B ØC ØD Fasteners

406-201-08 26 20 10.1 60 1xM10

Art. No. A B C D E F G H I ØJ ØK Fasteners

406-201-09 45 15 13 40 94 45.5 30.5 112 18 6.2 12 4xM6

96

Page 97: Seldén Deck Hardware Version 6 | lmarinerigging.com

B

ØD

ØE

A

A

C

ØF

J

B C C

EF

GH

I

K

ØD

ØA

AE

ØD

C

B

Art. No. A B C ØD ØE ØF Fasteners2)

508-347R1) 20x25 25 6 35x40 5.2 13 4xM5

508-815R 30 26 8.5 50 6.5 11 2xM6

508-816R 30 34 11 60 6.5 14 4xM6

508-817R 35 41 13.5 72 9 16.5 4xM8

508-818R 42 52 17.5 86 11 20.5 4xM10

Art. No. A B C ØD ØE Fasteners2)

508-750-01R 49 43 27.5 7 24 3xM6

508-760-01R 65 56 34 8.7 32 3xM6

fixed Pad eYesfoldaBle Pad eYes

1) Squared base, see page 86. 2) Countersunk

2) Countersunk

System ØA B C ØD E F G H I J K

40 7 42 47 40 109 156 203 250 297 25 50

50 9 54 58 50 137 195 253 311 369 27 54

deCk organiZers

97

Page 98: Seldén Deck Hardware Version 6 | lmarinerigging.com

ØD

B

E

C

A

ØD

AE

B

C

ØD

AE

B

C

ØD

B

A

EC

C

B

A

EF

ØD

ØD

E

B

CA

Art. No. A B C ØD E Fasteners1)

442-105 36 33 14 5.2 8 1xM5

443-125 41 41 18 6.2 9 1xM6

444-127 44 51 30 10.2 13 1xM10

Art. No. A B C ØD E

443-303-01/-02 89 53 34 8,2 63

443-304-02 124 53 69 8,2 98

Art. No. A B C ØD E

442-135 40 37 30 5.2 20

443-135 36 50 15 7.2 6

444-135 64 70 41 10.2 25

Art. No. A B C ØD E Fasteners

442-112-01/-02/-03/-04 87 40 23 5.2 53 1xM5

443-112-01/-02/-03/-04 100 52 24 6.2 74 1xM61)

444-112-01/-02/-03/-04 126 70 31 10.2 81 1xM101)

Art. No. A B C ØD E F Fasteners

442-138-01 51 40 18 5.2 23 45 2xM5

443-142-01 61 52 22 6.2 24 31 2xM61)

444-138-01 78 70 30 10.2 31 42 2xM101)

end ConTrol

end sToP self TaCking

HigH BeaM adaPTor

end ConTrol PerforManCe

end CaP

1) Countersunk

1) Countersunk 1) Countersunk

Fasteners included. M8 screw to be threaded in the track

Art. No. A B C ØD E Fasteners1)

442-103-01 60 30 4 5,5 53 1xM5

443-124-01 71 45 10 6,2 62 1xM6

end ConTrol genoa

1) Countersunk

98

Page 99: Seldén Deck Hardware Version 6 | lmarinerigging.com

cOntentS in ALpHAbeticAL OrDer

BBall bearing block 20 36Ball bearing block 30 38Ball bearing block 40 40Ball bearing block High load 25 42

CCam cleats 76Complete main sheet system 72Control line 71

dDeck organizers 82Deck swivel 80Dimensioning 90

eEye swivel 80

gGenoa system 68

HHole pattern 95

lLoads 88Lubrication 87

MMain system 66Mast swivel 81

PPadeye 86Plain bearing block 100 26Plain bearing block 16 17Plain bearing block 20 17Plain bearing block 50 18Plain bearing block 60 20Plain bearing block 60 Quick lock 28Plain bearing block 70 22Plain bearing block 80 24Plain bearing block 80 Quick lock 28Plain bearing block High load 44

rRatchet block 45 46Roller bearing block 60 32Roller bearing block 80 33

sSealing washer 50Self tacking system 70Shackles 87Sheat lead 84Stand-up spring 87

TTackles 73Track system 48Traveller system 22 54Traveller system 30 56Traveller system 30 Performance 62Traveller system 42 60Tilt-absorber 68

UUnsupported tracks 94

VValley cleats 78

wWinches 10

99

Page 100: Seldén Deck Hardware Version 6 | lmarinerigging.com

,

Seldén Mast AB, Sweden Tel +46 (0)31 69 69 00 Fax +46 (0)31 29 71 37 e-mail [email protected]

Seldén Mast Limited, UK Tel +44 (0)1329 50 40 00 Fax +44 (0)1329 50 40 49 e-mail [email protected]

Seldén Mast Inc., USA Tel +1 843-760-6278 Fax +1 843-760-1220 e-mail [email protected]

Seldén Mast A/S, Denmark Tel +45 39 18 44 00 Fax +45 39 27 17 00 e-mail [email protected]

Seldén Mid Europe B.V., NetherlandsTel +31 (0)111-698 120 Fax +31 (0)111-698 130 e-mail [email protected]

Seldén Mast SAS, FranceTel +33 (0)251 362 110 Fax +33 (0)251 362 185 e-mail [email protected]

Seldén Mast Asia Ltd, Hong KongTel +852 3572 0613 Fax +852 3572 0623 e-mail [email protected]

www.seldenmast.com

595

-905

-E 2

012-

01-1

7 P

rint

ed in

Sw

eden

.

The Seldén Group is the world’s leading manufacturer of

mast and rigging systems in carbon and aluminium for

dinghies, keelboats and yachts. The range was extended

with deck hardware in 2008.

The Group consists of Seldén Mast AB in Sweden, Seldén

Mast A/S in Denmark, Seldén Mast Ltd in the UK, Seldén

Mid Europe B.V. in the Nether lands, Seldén Mast SAS in

France, Seldén Mast Inc. in the USA and Seldén Mast Asia

Ltd in Hong Kong.

Our well known brands are Seldén and Furlex. The world-

wide success of Furlex has enabled us to build a network

of over 750 authorised dealers covering the world’s marine

markets. So wherever you sail, you can be sure of fast

access to our service, spare parts and know-how.

SELDéN and FUrLEx are registered trademarks of Seldén Mast AB.

DINGHIESKEELBOATSYACHTS

100


Recommended