S+Elevators

20

12

GPn

Ele

va

tors

Sc

hm

itt

+ S

oh

GP

Th

e G

las

s a

nd

Pa

no

ram

a

eeeleE

leeeelva

tva

tva

tv

av

av

avvvv

or

or

or

oo

Schmitt + Sohn Elevators GmbH & Co.KG

Hadermühle 9–15

D-90402 Nuremberg

Phone +49(0)911-2404-0

Fax +49(0)911-2404-111

[email protected]

[email protected]

www.schmitt-aufzuege.com

The Glass and Panorama Elevator

GP The Glass and Panorama Elevator

The company

Our key figuresSchmitt + Sohn at a glance – Aspects of

a successful company

1861 6 18 4Foundation of the

company.

Tradition in lift

construction and service.

generations of experience.

The company family as a

constant.

domestic and foreign

companies.

Decentralised and close

to you.

countries in Europe.

We are at home in:

Germany, Portugal, Aus-

tria, the Czech Republic.

1,400 80,000 1,360 9001systems annual

production.

Production in our own

works.

lift systems built.

Our references throughout

Europe.

employees.

Success has many faces.

This figure includes

48 trainees.

DIN standard quality.

Improving. Developing.

Looking ahead.

24 35,000 134 0hour on-call readiness

365 days per year.

Always there for you.

systems to be serviced

annually.

Competence you can

rely on.

million EUR turnover.

Ultimately convincing.

bank liabilities.

Independence for strong

partnerships.

Our values

Daily learning:

This is what our 1,360 dedicated employees stand for,

by devoting all their skills and abilities to their work.

Quality:

Continual further development and improvement of

processes and products. For example in production.

Every year, 1,400 new lift systems leave our works.

All to consistently high quality.

Entrepreneurial reliability:

The basis of enduring relationships, both with our

customers and with our employees, is entrepreneurial

reliability. And not only since yesterday, but for over

100 years.

Our Products

We develop unusual products, which comply with

exacting requirements, both technically and aesthe-

tically. Those products arise from the dialogue be-

tween architecture, design and technology. This is

part of our conviction. Systematics, functionality and

the quality of careful finishing down the last detail

belong just as much to the commitment to rational

development and design.

Because our task is the mobility of people.

Our Service

We will assign you one of our service managers, who

will be there to assist you throughout the complete

service life of your lifts. A great responsibility, because

we look after over 35,000 lift systems annually. Thanks

to our decentralised network, we are always in the

neighbourhood to provide convincing on-site service.

Safety takes top priority: Our service is available

24 hours per day, 365 days per year – with 0 waiting

time. For a successful and lasting partnership.

Contents

Welcome

The lift 4 – 49

Quality 8

Details 10

Colours – Materials 16

Doors 30

Responsibility 38

Accessories 40

Planning 50 – 61

Service 62 – 65

Contact 66

Imprint 68

Contents

1

GP Glass and Panorama Elevator

Welcome

Martin Schmitt

Managing Partner, Managing Director

Dr. Johannes Schmitt

Managing Partner, Managing Director

Fritz Stahlberg

Managing Director


Experience architecture anew

With pleasure and also a little pride, we present to you today the

product brochure of the original GP glass panorama lifts from

Schmitt+ Sohn. An internationally outstanding top product,

which in the face of all rapid change relies uncompromisingly on

quality.

Created by the passion of 1,360 dedicated employees and over

100 years in-house experience in lift construction. Our answer.

Our attitude. Our understanding for 6 generations.

Out of the conviction for reliable construction. For customers

who place the highest demands on themselves and their busi-

ness partners. For all those in search of peak performances,

down to the last detail. A product which is inspiring from the

planning stage right through to service.

With brilliant elegance, high-quality materials and convincing

details. Constructed for the pleasure of use and the reliability of

special personal service.

We and our name stand firmly for these values. Out of the

conviction of a family-managed company with a long

tradition. In the responsibility for employees, customers

and partners. Look, read and discover.

Welcome to Schmitt + Sohn.

Dr. Johannes Schmitt

Martin Schmitt

Fritz Stahlberg

The Management

Schmitt + Sohn Elevators

2 3


The lift

GP

The Glass and

Panorama Elevator

4 5


The lift

One claim

One attitude

One statement

from the enduring

conviction to

create special

values

GP

The Glass and

Panorama Elevator

6 7


Quality

Quality

Perfect to the last

detail

8 9


Details

Lighting LD5X

Dimensions: HWD 100 x 940 x 1,240 mm

Light frame: Underside LSG, semi-transparent, lighted.

Side acrylic glass , white, polished,

semi-transparent

Central area: LSG, semi-transparent, unlighted

Light: LED neutral white

Operating panel BT-I-TFT-LED

Dimensions: HWD 1,205 x 150 x 15 mm

Operating panel: Stainless steel with finishing grinding

Light frame: Acrylic glass, white, satin finish, white LED

Information panel: Acrylic glass, white,

Display: High-resolution TFT

Buttons: Stainless steel with finishing grinding,

inset flush

Call acceptance: Blue LED

Symbols: Plastic, light grey, Standard: EN 81-70

Vertical section of ceiling with integral LD5X light

Lighting scheme of light frame, central area unlighted

Horizontal section of side wall with fitted operating panel

Lighting scheme, light frame

10 11


Details

Handrail HL

Handrail: Stainless steel with finishing grinding,

ø 33.70 mm

Handrail holder: Stainless steel with finishing grinding,

solid

Handrail ends: Stainless steel with finishing grinding

Handrail bow: Stainless steel with finishing grinding,

welded

Handrail support: Stainless steel with finishing grinding,

solid

Horizontal section side wall

Handrail holder

Horizontal section of rear wall / side wall

Cab corner / Handrail support

Vertical section of rear wall / side wall

Cab corner / Handrail support

12 13


Floor / skirting rail

Floor: Granit 90, light grey

Skirting rail: Stainless steel with finishing grinding

Vertical section of rear wall / floor

Skirting rail fitted. Concealed, generously dimensioned cab ventilation

under the skirting rail

Horizontal section of central panel, Side wall with operating panel

Accent Color Glas®

Horizontal section of central panel, Side wall without operating panel

Accent Color Glas®

Details

Handrail GP cabs ≥ 1,000 kg

Handrail: Stainless steel with finishing grinding,

ø 33.70 mm


solid


Handrail bows: Stainless steel with finishing grinding,

welded

14 15

Colours – Materials

GP Glas Panorama Aufzug 16 21

GP Glass and Panorama ElevatorGP Glass and Panorama Elevator


Product specification

Detail Description Series Accessories

Side walls Laminated safety glass LSG, stainless steel with finishing grinding.

Glass frames stainless steel with finishing grinding.

Rear wall Laminated safety glass LSG.

Glass frames stainless steel with finishing grinding.

Cab corners Stainless steel with finishing grinding.

Ceiling Painted RAL 9016 traffic white. Concealed, generously dimensioned

cab ventilation at cabin depth in both side walls.

Lighting LD5X, suspended light ceiling. Central area LSG, matt film, unlighted.

Light frame acrylic glass, white, polished, semi-transparent.

Central area lighted.

Light LED neutral white.

LED-RGB with colour control 1).

Floor Granite 90, light grey

Lowered cab floor for installed floor covering 2).

Skirting rail Stainless steel with finishing grinding.

Concealed, generously dimensioned cab ventilation.

Handrail Stainless steel with finishing grinding, suitable for the handicapped to

DIN EN 81-70:2005-09 3), rear wall, side walls ø 33.70 mm. Handrail

holder stainless steel, solid. Corner connection stainless steel welded

with finishing grinding.Handrail ends: Stainless steel.

Protection rails Stainless steel with finishing grinding, side wall ø 33.70 mm. Handrail

holder stainless steel, solid. Corner connection stainless steel welded

with finishing grinding.Handrail ends: Stainless steel.

Operating panel

Cab

Stainless steel with finishing grinding, positioned suitable for the

handicapped to DIN EN 81-70:2005-09 4), concealed attachment.

Information panel acrylic glass, white, light frame acrylic glass, white,

satin finish. Display high-resolution TFT. Short-travel buttons, flush,

round, button surface stainless steel, call acceptance blue LED,

symbols plastic, light grey.

Stainless steel with finishing grinding, suitable for the handicapped to

DIN EN 81-70:2005-09 Appendix G, horizontal, concealed attachment.

Separate information panel. Large, raised buttons, round, button

surface stainless steel, call acceptance blue LED, symbols raised,

tactile, plastic, light grey 4).

Nameplates Stainless steel with finishing grinding, concealed attachment, set

flush in operating panel. Individually replaceable. Dark grey engraving.

Cab portal Stainless steel with finishing grinding.

Cab door Full glass door. Laminated safety glass, stainless steel with finishing

grinding, two-piece, centre-opening, door height 2.100 mm 5).

Full glass door, two-piece, opening one side.

Glass frame door. Laminated safety glass, stainless steel with

finishing grinding.

Steel plate door, stainless steel with finishing grinding.

Door drive Energy-saving regulated drive with intelligent travel measurement.

Door monitoring 2-D safety light grid over full door height (no light barrier!).

3-D safety light grid with vestibule monitoring.


Shaft doors Full glass door. Laminated safety glass, stainless steel with finishing

grinding, two-piece, centre-opening, door height as for cab door.

Full glass door, two-piece, opening one side.

Glass frame door. Laminated safety glass, stainless steel with finishing

grinding.

Steel plate door, primed, stainless steel with finishing grinding,

stainless steel lines 6).

Wall bezel settings M1, primed, stainless steel with finishing grinding,

stainless steel, linen 6).

Portals: P1 primed, stainless steel with finishing grinding, stainless steel

lines. Color Glas®. P7-G laminated safety glass 6).

Operating panel

Shaft doors

Stainless steel with finishing grinding, mounted in door frame, con-

cealed attachment. Short-travel buttons, inset flush, button surface

stainless steel, call acceptance blue LED, symbols plastic, light grey.

Positioned in the portal or masonry, easier accessibility to

DIN EN 81-70:2005-09, cover plate screw-fitted.

Large buttons, suitable for the handicapped to DIN EN 81-70:2005-09

Appendix G, panel width 80 mm 7).

Controls Collective single-button control using the latest bus technology. Fast

orientation and avoidance of selection mistakes for short waiting times

and high carriage capacity. Service panel at the top stopping point,

primed 8). Overload control. Frequency regulation for load-independent

travel curves and accurate stopping. Battery-buffered, load-dependent

emergency escape at the next stopping point.

Emergency power and evacuation functions. Access control systems.

Penthouse control. Priority carriage with key switch. Floor announcement.

Travel direction displays and acoustic signals to DIN EN 81-70:2005-09.

Interfaces to building control systems.

Service panel stainless steel with finishing grinding.

Service panel at any stopping point or neighbouring rooms 8).

Collective two-button control, collective group control.

Emergency call

system

Digital emergency call and diagnosis system to EN 81-28 for emergency

call transmission to the continually-manned Schmitt + Sohn Service

Centre. Electronic misuse suppression 9).

Video misuse identification for the digital emergency call and diagnosis

system 9).

Remote monitoring of lift attendant functions, transmission of diagnosis

data, GSM module 9).

Drive Gearless cable drive in the shaft. High efficiency and low power

consumption. Speed 1.0 and 1.6 m/sec. Travel height up to 40 m.

Lifting gear Special lift cable, very smooth running and maintenance-free.

No electronic monitoring required.

1817


1) In RGB mode, reduction of the brightness in the cab is possible.

2) Maximum 75 kg/m² and 30 mm thickness.

Changes in colour shades are possible depending on the floor covering.

3) Agreement required between the customer and Schmitt + Sohn on proper use.

4) Not for 450 kg capacity.

5) 2,000mm with reduced shaft head of 2,700 to 2,900 mm.

6 Service panel primed, stainless steel with finishing grinding.

7) Operating panel stainless steel with finishing grinding, 2 mm thick.

8) Observe possible fire safety requirements in necessary stairwells.

9) Redirection to the Schmitt + Sohn Service Centre and permanent on-call readi-

ness is agreed in a separate service contract.

10) On request.


Energy-saving

mode

Deactivation of cab light, fan and displays in the event of stoppage. On

cal entry, the assemblies switch themselves on again automatically.

Potential saving of up to 70% of power consumption.

Stand-by mode Staged running-down of door drive, light grid, controls and frequency

regulation after longer standstill.

Energy calculator Production of energy efficiency forecasts to VDI 4707.

Shaft smoke

extraction

System for the reduction of heat loss by the shaft ventilation.

Electrically-controlled window or dome light.

Intermediate

circuit collective

switching.

Reciprocal energy feed in case of opposite movement direction of cabs

in one group 10).

We will be happy to assist you with your planning.

Please contact us.

Subject to technical amendment.

Glass and Panorama Elevator, capacity 1,000 kg

2019



Stainless steel

LSG

Traffic white

Granite 90

CG Brilliant white

CG Silk grey

CG Dark blue

CG Deep orange

CG Light green

CG Light blue

CG Beige

CG Light yellow


2322



GP 1 Stainless steel

GP 4CG® Dark blue

GP 7CG® Light blue

GP 2 CG® Brilliant white

GP 5CG® Deep orange

GP 8CG® Beige

GP 3 CG® Silk grey

GP 6CG® Light green

GP 9CG® Light yellow

Colour combinations GP 630 kg

24 25



GP 1 Stainless steel

GP 4CG® Dark blue

GP 7CG® Light blue

GP 2 CG® Brilliant white

GP 5CG® Deep orange

GP 8CG® Beige

GP 3 CG® Silk grey

GP 6CG® Light green

GP 9CG® Light yellow

Colour combinations GP 1000 kg

26 27


Cab Exterior

Full glazing: Laminated safety glass

Cab exterior panelling: Stainless steel with finishing grinding,

concealed fixing

Ceiling rails: Stainless steel with finishing grinding

Platform: Aluminum bulb plate all-over

Crossarms and traction angles: lacquered

Door drive: lacquered


28 29


Doors

Shaft door with wall connection T1

Shaft door: Two-piece, central opening, sliding door,

primed steel plate

Accessories: Stainless steel with finishing

grinding

Door frame /

wall connection:

Primed steel plate


grinding



inset flush


Symbols: Plastic, light grey


Service panel

Service panel: Primed steel plate


grinding

Horizontal section of cab and shaft door with door frame /

wall connection T1

30 31


Doors

Cab and shaft door

with wall connection T1

Door sills


primed steel plate


grinding

Door frame /

wall connection:

Primed steel plate


grinding

Cab door: Two-piece, central opening, sliding door,

stainless steel with finishing grinding

Door sills: Aluminium

Cab and shaft door

with wall connection T1

Door sills, service panel

Service panel: Primed steel plate


grinding



laminated safety glass, stainless steel

with finishing grinding

Door frame /

wall connection:

Primed steel plate


grinding



i nset flush




Wall bezel M1

Wall bezel: Primed steel plate


grinding

32 33


Doors

Shaft door with Color Glas® Portal

Portal: Color Glas®

Glass frame: Stainless steel with finishing grinding

Shaft door with stainless steel portal

Portal: Stainless steel with finishing grinding

Horizontal section of shaft door with door frame /

stainless steel portal

Horizontal section of shaft door with door frame /

Color Glas® Portal

34 35


Shaft door with glass portal P7-G

Portal: Full glazing laminated safety glass

Stainless steel with finishing grinding

Door: Glass door

Laminated safety glass


Door frame: Stainless steel with finishing grinding


Horizontal section of cab and shaft door with,

full glass door with glass portal P7-G

Shaft door with glass portal P7-G

Portal: Full glazing laminated safety glass


Door: Framed glass door

Laminated safety glass


Door frame: Stainless steel with finishing grinding


Horizontal section of cab and shaft door,

glass frame door with glass portal P7-G

Doors

36 37


Responsibility

Responsibility

“One customer - one responsible

project manager. An exacting demand

we place on ourselves.

For the customer, this means: An

expert partner, who takes care of

everything from planning to

production, installation and service.

Throughout Europe.”

Karl-Heinz Weixelbaum, New system sales

38 39


Accessories

Accessories

for individual

requirements

40 41


Lighting LD5X



Side acrylic glass, white, polished,

semi-transparent

Central area: LSG, semi-transparent, lighted

Light: LED neutral white

Nameplates NS2

Dimensions: HW 81 x 30 mm

Nameplates: Stainless steel with finishing grinding,

individually replaceable.

Lettering: Dark grey engraving.

Vertical section of ceiling with integral LD5X light.

Lighting scheme of light frame, central area lighted

Accessories

42 43


Lighting LD5X-LED-RGB



Side acrylic glass, white, polished,

semi-transparent

Central area: LSG, semi-transparent, unlighted / lighted

Light: LED neutral white, LED RGB colour control

Schmitt + Sohn light design

Experience light. See colours.

Schmitt + Sohn light design allows a range of attractive

designs with light thanks to intelligent RGB colour

controls.

The colours, colour change and colour sequences can

be effectively combined with one another. This creates

convincing, inspiring and unusual lighting moods in the

cab.

The colours change in the side light frame of the cab

lighting. The lighting is visually reinforced by the reflec-

tion from the cab ceiling.

The very good basic lighting in the cab is produced by

the white LED light frame.

Light settings can be programmed according to

customer-specific, design or functional requirements.

Applications include:

Simulation of natural daylight progression

Creation of lighting moods

Coloured floor visualisation

Accessories

44 45


Operating panel EN 81-70-G

Dimensions: HWD 180 x 500/ 600 x 99.5 mm


EN 81-70:2005-09, Appendix G


large buttons, raised. Main access:

Plastic ring, green, raised.

Emergency call button: recessed


Symbols: Plastic, light grey, raised, tactile

Display panel AT-I-TFT-LED

Dimensions: HWD 490 x 150 x 15 mm

Display panel: Stainless steel with finishing grinding

Light frame: Acrylic glass, white, satin finish, LED

white

Information panel: Acrylic glass, white

Display: High-resolution TFT

Vertical section of side wall

Operating panel EN 81-70-G

Horizontal section of side wall with operating panel

DIN EN 81-70:2005-09, Appendix G. Surface-mounted display panel.

Lighting scheme, light frame

Accessories

46 47


Operating panel BT-TP-CG-1

Single-button collective controls

Dimensions: HWD 400 x 66 x 6 mm

Operating panel: Stainless steel with finishing

grinding, concealed attachment

Skirting frame: Acrylic glass, white

Information panel: Acrylic glass, blue

Display: Blue LED

Buttons: Stainless steel with finishing

grinding, flush-mounted, arrange-

ment to DIN EN 81-70:2005-09

Call acknowledgement: Blue LED


Luggage protection rails

Profile: Stainless steel with finishing grinding,

ø 33.70 mm


solid


Operating panel BT-TP-CG-2

Two-button and

group collective controls

Display: Blue LED

Accessories: Floor display

Horizontal section of side wall with fitted operating panel.

Luggage protection rails all round. Handrail bows.

Accessories

Horizontal section of perating panel.

48 49


The planning

GP

The planning

GP Glas Panorama Aufzug 50 51


The planning

Technical data and dimensions

Capacity in kg and persons Cab dimensions in mm Door dimensions in mm Shaft dimensions in mm

kg Persons Width (KB) Depth (KT) Height (KH) Width (TB) Height (TH) 4)

Width (SB) Depth (ST) Shaft head (SK) 2)

Shaft pit (SG) 3)

Doors one side 5)

Opposite entrances 6)

v = 1.0/1.6 m/s

450 6 1,000 1,250 2,200/2,300 900 2,100 2,000/1,600 1,650 1,790 3,600/3,800 1,050/1,250

630 8 1,100 1,400 2,200/2,300 900 2,100 2,000/1,700 1,800 1,940 3,600/3,800 1,050/1,250

675 9 1,200 1,400 2,200/2,300 900 2,100 2,000/1,800 1,800 1,940 3,600/3,800 1,050/1,250

1,000 13 1,100 2,100 2,200/2,300 900 2,100 2,000/1,700 2,500 2,640 3,600/3,800 1,050/1,250

1,600 21 1,400 2,400 2,200/2,300 1,300 2,100 2,400/2,200 2,800 2,940 3,850/4,050 1,050/1,250

1) Customers should note the Energy Saving Directive (EnEV)

2) Reduced shaft head:

≥ 2,900 bis < 3,600/3,800 mm with replacement measures technically possible.

Up to 1.6 m/s on request.

Note: The approval of reduced shaft heads and shaft pits is regulated differ-

ently in individual countries. In some cases, a reduction is not permissible.

Clarification may need to be obtained from the relevant authorities. We will be

happy to assist you with this clarification.”

3) Reduced shaft pit: ≥ 500 mm (with 6 mm floor covering und adhesive).

Up to 1.6 m/s on request.

4) Height of wall recess: HM = TH + 125 mm.

5) Shaft depth can be reduced by 120 mm by fitting the shaft doors in niches.

6) Shaft depth can be reduced by 240 mm by fitting the shaft doors in niches.

We will be happy to assist you with the planning and tender.

Please give us a call.

Doors central / opening one side

F2

F1

F3

M3

U V W

PE~

Shaft ventilation to state

building regulations (LBO) 1)

Vertical section

Options:

Reduced shaft head 2)

Reduced shaft pit 3)

Do

or

he

igh

t (T

H)

Ca

b h

eig

ht

(KH

)

Sh

aft

he

ad

(S

K)

Do

or

he

igh

t (T

H)

He

igh

t o

f w

all

re

ce

ss

(H

M)

4)

Tra

ve

l h

eig

ht

(FH

)S

ha

ft p

it (

SG

)

Layout plan

Door recess for the

service panel

Ca

b d

ep

th (

KT

)

Sh

aft

de

pth

(S

T)

Door width (TB)

Cab width (KB)

Shaft width (SB)

52 53


The planning

Quality and passenger comfort

Capacity

in kg

Energy

efficiency

class 7)

Noise pressure level in dB (A)

In front of shaft doors In the cab In the shaft

VDI-

Directive 8)GP

Elevator 9)VDI-

Directive 10)GP

Elevator 9)VDI-

Directive 8)GP

Elevator 9)

450 A 65 40 No specification 48 75 50

630/675 A 65 40 No specification 48 75 50

1,000 A 65 40 No specification 48 75 50

1,600 A 65 40 No specification 48 75 50

Capacity

in kg

Brightness in Lux Stopping accuracy in mm

1 m above cab floor At the cab floor Stopping accuracy Adjustment accuracy

EN 81 11) GP

Elevator 12)EN 81 11) GP

Elevator 12)EN 81 13) GP

Elevator

EN 81 13) GP

Elevator

450 min. 50/100 min. 200 min. 50/100 min. 150 +/- 10 +/- 3 +/- 20 +/- 8

630/675 min. 50/100 min. 200 min. 50/100 min. 150 +/- 10 +/- 3 +/- 20 +/- 8

1,000 min. 50/100 min. 200 min. 50/100 min. 150 +/- 10 +/- 3 +/- 20 +/- 8

1,600 min. 50/100 min. 200 min. 50/100 min. 150 +/- 10 +/- 3 +/- 20 +/- 8

Capacity

in kg

Smoothness

in milli-G 14)Air volume determination

in terms of air exchange

rate in m³/h

horizontal vertical DIN 15) GP Elevator

450 11 +/- 1 11,2 +/- 1 14 39

630 / 675 11 +/- 1 11,2 +/- 1 17 53

1,000 11 +/- 1 11,2 +/- 1 25 66

1,600 11 +/- 1 11,2 +/- 1 42 110

7) VDI 4707, Lifts, energy efficiency in usage category 1.

In usage category 2, the Glass and Panorama Elevator complies

with energy efficiency class A with optional measures.

In usage category 2 and 3, the Glass and Panorama Elevator

complies with energy efficiency class B.

8) VDI Directive 2566-2:2004-05 Page 2, noise protection for machine

room-less lift systems. The observation of DIN 4109 on the basis of

VDI Directive 2566 must be ensured by constructional noise protec-

tion.

Constructional noise protection measures must be taken into

account in the planning. Consultation on noise requirements is

recommended.

9) The specified noise pressure levels refer to an elevator in a

concrete shaft with a mass per unit area of m ≥ 490 kg/m² to

Supplement 1 of DIN 4109.

10) The VDI Directive 2566 specifies no reference value here. The noise

pressure levels specify only the degree of comfort for the user.

11) DIN EN 81-1, Safety regulations for the construction and installa-

tion of lifts.

Requirement: Minimum lighting intensity at the cab floor and the

controls: 50 Lux.

DIN EN 81-70, Accessibility of lifts for persons, including persons

with handicaps.

Recommendation: The cab lighting should produce a lighting level

evenly distributed over the cab floor of at least 100 Lux, without

the installation of spotlights.

12) Further maximum values up to 350 Lux are possible, depending

on the selected lighting and equipment.

13) EN 81-1 and EN 81-2, Amendment 3.

Adjustment accuracy: At level differences ≥ 20 mm when loading

and unloading, the lift is adjusted and must regain the prescribed

stopping accuracy.

14) ISO 18738, Lifts - Measurement of passenger comfort of lifts,

describes the measurement procedure.

15) DIN 1946 Part 1 and 2: Cab volume x 5.


Type-approved lift system to EN 81

The cab:

The lift shaft:

by the shaft ventilation with electrically-controlled window or dome

light, optional

The doors:

standstill

One-sided or opposite

The controls:

longer standstill.

after longer standstill.

The drive:

54 55

KH

= 2

20

0

TH

= 2

10

0

KT = 1400

10

01

00

TB

= 9

00

KB

= 1

10

0

420 430476 420 930976

KH

= 2

20

0

KH

= 2

20

0

TH

= 2

10

05

05

0T

B =

13

00

KB

= 1

40

0

KT = 2400

KH

= 2

20

0

TH

= 2

10

0

KT = 1250

50

50

TB

= 9

00

KB

= 1

00

0

420 355401

TH

= 2

10

01

00

10

0T

B =

90

0

KB

= 1

10

0

KT = 2100

420 780826


The planning

Cab systems

Door height (TH)

Cab height (KH)

Cab width (KB)

Cab depth (KT)

450/6450 kg Capacity 6 Persons




56 57


The planning

Hoistway frames systems

Glazing between the profiles

Vertical section

Glazing between the profiles

Vertical section

Glass fixing, point fixing

Vertical section

Aluminium façade profile

Horizontal sectionHorizontal section Horizontal section

Glass fixing, point fixing

Aluminium façade profile

58 59

1)


The planning

The Glass and Panorama Elevator

complies with the highest

energy efficiency class A1)

The energy consumption of all buildings in Germany is

approx. 40% of the total energy consumption 2).

Lifts take up to 3 to 5% of this, which in the whole of

Europe makes 18 TWh annually 3).

The energy consumption of a lift is determined by many

factors. The main factors are:

ventilation

The weighting of the factors depends heavily on the use

of the relevant lift. The stopped consumption of lifts in

residential buildings alone makes up about 70% of the

total energy consumption of the lifts.

The power consumption is determined primarily by the

system components and their energy efficiency.

For lifts which are mostly in standby operation, the en-

ergy consumption can be reduced by modern controls

by up to 50%.

For cable lifts subject to frequent usage, high-quality

drives with a high efficiency level should be used.

With the use of intelligent control systems, mistaken

trips can be avoided, and call assignment in lift groups

optimised, depending on the level of traffic.

Reciprocal energy feed is possible in case of opposite

movement direction of cabs in lift groups.

Roll resistance should be optimised by high-quality,

maintenance-free ball bearings, round grooves and

plastic-sheathed cables and lighter constructions.

A shaft smoke extraction system can reduce the energy

loss caused by heat escaping through the shaft. Correct

and sustainable lift maintenance by qualified specialist

personnel on the basis of EN 13015 permanently

ensures the success of energy-saving measures.

1) The calculation basis is the usage category 1 to VDI 4707 for an Glass

and Panorama Elevator with 630 kg capacity, 5 stopping points, 12 m

travel height and 1.0 m/sec. speed

2) Source: REGIERUNGonline, Building and Living

3) Source: VDMA, Energy efficiency in lift technology

4) The calculation basis are shaft dimensions of 1,750 x 1,800 mm

surface area, 5 doors 900 x 2,000 mm, one-sided opening,

shaft height 16 m

Low consumption

High consumption

Energy-saving potential in movement consumption

The power consumption of lifts during movement depends mainly on the drive type. Modern, high-quality drive and

control technology reduce the energy consumption significantly. This is shown by the comparison of the movement

consumption of an Glass and Panorama Elevator with common drive types:

Energy-saving in standstill consumption

The power consumption of lifts during standstill depends mainly on its active consumption sources. The standstill

consumption can comprise up to 82% of the total energy consumption of a lift.

The greatest energy-saving potential lies in the switching off of unneeded consumers. This is shown by the technical

solutions of the Glass and Panorama Elevator:

Energy-saving potential in the shaft

Heat can escape unhindered to the outside through the required smoke extraction openings in the shaft head. Here

the greatest energy-saving potential lies in closing the smoke extraction openings electrically operated dome lights

or louvers.

The dome lights or louvers open on smoke detection (automatically) or deliberate ventilation (manually).

Three steps to the energy-efficient lift

The planning of serviceable and capable lift systems should at an early stage take into account the building type,

the planned use, and the applicable legal standards and regulations.

The energy assessment of a Glass and Panorama Elevator in three steps:

We will be happy to assist you with your planning. Please give us a call.

Advanced technology for

consistent energy-saving

10% Energy-saving in comparison to a comparable cable lift with gearbox

and frequency regulation.

45% Energy-saving in comparison to a comparable cable lift with gearbox,

pole-changing with 2 speeds.

75% Energy-saving in comparison to a comparable

hydraulic lift.

32% Energy-saving potential through the use of efficient lighting and switching off

the cab lighting when the lift is at a standstill.

5% Energy-saving potential through the switching off of the door drive

and light grid.

1% Energy-saving potential through the switching off of the cab stopping

and direction displays.

9% Energy-saving potential through the switching off of the frequency converter

in off-peak times.

10,400 Energy-saving is possible throughout the year if the escape of heat through the smoke

extraction openings in the shaft head is prevented. 4)

60 61


The service

GP

The service

62 63


The service

Contract customer with

Schmitt + Sohn This means completely personal service to the highest level. Competent and all

round-the-clock. With reliability and responsibility. With the conviction and

tradition of an independent family company. Guided by the classical values of a

successful partnership. With a strong and capable team and modern production

for all applications. Always working together, always there for you, by the side of

the customer. High customer satisfaction over many years, with excellent service

on call at all times.

1 + 1One customer - one responsible service manager.

An experts partner for all matters relating to service –

throughout Europe.

35,000 24/365/0Schmitt + Sohn maintains lift systems annually,

both own and other makes.

Our on-call service: 24 hours per day, 365 days per year

with 0 waiting time.

330 86Qualified service technicians. Always on the move.

Specialist maintenance, repair and assessment of

lift systems.

Service managers are responsible for the customer, the

service technicians and the lift systems.

13015 384DIN standard quality. The standard for

qualified servicing of lift systems.

Personnel in Technology, Development, Production and

Administration. Fully up-to-date and service-orientated.

Always on the job. Immediate reaction in case of

emergency.

1 32The central spare parts warehouse near Nürnberg,

which stocks all spare parts, most of which are original

parts from our own production.

Branches and sales offices throughout Europe.

Closeness to our customers. For all types of service

required for your lift.

425 10,000Service vehicles as mobile spare parts stores, carrying

over 300 of the most important wear parts.

Direct on site. Quick reaction times. High availability.

A Schmitt + Sohn lift consists of over 10,000 parts,

almost all of which we produce ourselves in our own

works. Genuine original parts to consistently high quality.

20 years spare parts guarantee.

For orders placed before 16:00, we deliver any of these

10,000 parts overnight.

System maintenance

The service contract for system maintenance covers the

checking and servicing of all safety devices, setting and

adjustment work to EN 13015, as required and for all

makes of lifts.

Full maintenance

The service contract for full maintenance covers all costs

which can be incurred in connection with the operation

of a lift system:

Maintenance work and repair measures, including all

spare parts deliveries and fault rectification, and the

performance of the regular official tests.

C 2000 emergency call system

The C 2000 service contract consists of modular services:

Emergency call and video misuse detection, lift atten-

dant and building control technology module, online care

all round the clock.

C 2000 AWM

Assumption of the main lift maintenance tasks according

to operating safety regulations by the use of an electronic

lift minitor.

64 65


Contact

90402 Nürnberg

Hadermühle 9–15

Fon +49(0)911-2404-0

Fax +49(0)911-2404-111

90455 Kornburg

Kellermannstraße 16

Fon +49(0)9129-9025-0

Fax +49(0)9129-9025-27

95445 Bayreuth

Am Bauhof 12

Fon +49(0)921-787782-0

Fax +49(0)921-787782-28

13509 Berlin

Miraustraße 50–52

Fon +49(0)30-4360225-0

Fax +49(0)30-4360225-28

09125 Chemnitz

Reichenhainer Straße 171

Fon +49(0)371-53099-0

Fax +49(0)371-53099-99

96450 Coburg

Hahnwiese 5

Fon +49(0)9561-2498-0

Fax +49(0)9561-2498-70

01277 Dresden

Bodenbacher Str. 141

Fon +49(0)351-25101-13

Fax +49(0)351-25101-28

99097 Erfurt

Alte Chaussee 87

Fon +49(0)361-2110-436

Fax +49(0)361-2110-548

45138 Essen

Huttropstraße 29

Fon +49(0)201-28010-0

Fax +49(0)201-28010-48

60314 Frankfurt

Riederhofstraße 16–18

Fon +49(0)69-420805-0

Fax +49(0)69-420805-29

50226 Frechen

Alfred-Nobel-Straße 7–9

Fon +49(0)2234-95379-0

Fax +49(0)2234-95379-22

85748 Garching

Carl-Zeiss-Straße 5

Fon +49(0)89-959398-0

Fax +49(0)89-959398-18

22453 Hamburg

Papenreye 25

Fon +49(0)40-589713-0

Fax +49(0)40-589713-13

30916 Isernhagen H. B.

Chromstraße 16

Fon +49(0)511-72587-0

Fax +49(0)511-72587-25

67065 Ludwigshafen

Am Bubenpfad 1

Fon +49(0)621-579280-0

Fax +49(0)621-579280-9

04416 Markkleeberg-Wachau

Weinteichstraße 5

Fon +49(0)34297-4095-5

Fax +49(0)34297-4095-6

93059 Regensburg

Im Gewerbepark A2

Fon +49(0)941-46462-0

Fax +49(0)941-46462-46

72070 Tübingen

Industriestraße 24

Fon +49(0)7071-7969-0

Fax +49(0)7071-7969-29

97076 Würzburg

Äußere Aumühlstraße 2

Fon +49(0)931-25042-0

Fax +49(0)931-25042-29

6020 Innsbruck

Grabenweg 72

Fon +43(0)512-346502-0

Fax +43(0)512-346502-1

8020 Graz

Payer-Weyprecht-Straße 33–35

Fon +43(0)316-262923

Fax +43(0)316-262924

4020 Linz

Wiener Straße 131

Fon +43(0)732-330226

Fax +43(0)732-33022616

1100 Wien

Favoritner Gewerbering 15–17

Fon +43(0)1-4055508-0

Fax +43(0)1-4055508-4

6833 Klaus

Treietstraße 18

Fon +43(0)5523-54566

Fax +43(0)5523-54588

Porto

4466-953 S. Mamede de Infesta

Arroteia Via Norte, Apart. 1034

Tel +351-229 569 000

Fax +351-229 569 009

Serviço 24h: +351-229 569 002

Lisboa

2790-034 Carnaxide

Rua da Barruncheira, 3–1°

Esquerdo

Tel +351-213 030 350

Fax +351-213 032 706

Serviço 24h: +351-213 030 359

4700-361 Braga

Rua António Marinho, 68

Tel +351-253 610 819

Fax +351-253 260 951

Serviço 24h: +351-253 610 819

6000-228 Castelo Branco

Rua Fernando Namora,

LT I-3 , Lj.3

Tel +351-272 342 472

Fax +351-272 342 428

Serviço 24h: +351-272 342 472

3025-037 Coimbra

Urbanização do Loreto LT 4

R/C - C/C

Tel +351-239 493 803

Fax +351-239 496 329

Serviço 24h: +351-239 493 803

8000-325 Faro

Urbanização do Montinho

Lote I/J - Nº 9

Tel +351-289 822 758

Fax +351-289 813 098

Serviço 24h: +351-289 813 156

Czech Republic

www.schmitt-vytahy.cz

[email protected]

36211 Karlovy Vary

Jenišov 116

Tel +420 353 433-722

Fax +420 353 433-721

14800 Praha 4

Komárkova 1189/27

Tel +420 272 191-652

Fax +420 272 191-651

Germany

Service 24: +49 (0) 800 24 00 365

www.schmitt-aufzuege.de

[email protected]

Austria

www.schmitt-aufzuege.at

[email protected]

Portugal

www.schmitt-elevadores.com

[email protected]

In every one of our 32 European branches, you will

find competent contact partners, who will be able

to assist you on all subjects relating to lifts.

66

Imprint

Publisher:

Aufzugswerke

M. Schmitt + Sohn GmbH & Co. KG

Hadermühle 9-15

D-90402 Nuremberg

Editorial:

Dr. Johannes Schmitt,

Mathias Rüggeberg,

Marius Schreyer

Concept and design:


Marius Schreyer Design

Product design:



Photo design:


Realisation:

Loffmedia

Printing:

GZD, Ditzingen

Illustration acknowledgements:

Projekttriangle Design Studio

Martin Grothmaak,

Tom Ziora

Gerd Grimm


Willi Weihreter

MBS Studios

Thomas Esch

© Schmitt + Sohn Elevators

All rights reserved.

As at 06-2012

Registered designs:

All colour combinations shown are

registered and protected in Germany

and other countries as registered

designs by Schmitt Markenschutz-

gesellschaft mbH.

Trademark:

Color Glas® is a trademark of Schmitt

Markenschutzgesellschaft mbH

registered in Germany and other

countries.

Schmitt + Sohn Elevators GmbH & Co.KG

Hadermühle 9 –15

D-90402 Nuremberg

Phone +49(0)911-2404-0

Fax +49(0)911-2404-111

[email protected]

[email protected]

www.schmitt-aufzuege.com

Subject to technical amendment.

Colour variations may occur due to printing methods.

The company Schmitt + Sohn Elevators has been awarded internationally renowned design prizes for its

corporate design, the company presentation, its lift systems and lift series.

iF product design award 1997, Schmitt + Sohn Lift Systems

iF product design award 2008, Schmitt + Sohn Color Glas® Lifts

2009 Design Prize of the Federal Republic of Germany, nomination, Schmitt + Sohn Color Glas® Lifts

red dot award communication design 2011, Schmitt + Sohn Corporate Design

red dot award communication design 2011, Schmitt + Sohn Corporate Company Brochure

iF communication design award 2011, Schmitt + Sohn Company Brochure

2012 Design Prize of the Federal Republic of Germany, nomination, Schmitt + Sohn Company Brochure

Date post:	21-May-2017
Category:	Documents
Upload:	paragbhole
View:	219 times
Download:	4 times

S+Elevators

Documents