Regular Batches for Nov’19 Exam
Sem - V: Mech / Auto
Subject By At Starts Note Fees
Heat Transfer (GV)
Record Marks of 97/100 was scored by our student
Shrikant Swaminathan - RGIT College
Irfan sir Dadar
Batch code: H
13th July’19
(Sat, 8:45am to 1:15pm)
Lecture plan on Pg - 3
Four Extra lectures will be conducted on Public Holidays,
8:45am to 1:15pm 8500*
Dynamics of Machinery (GV)
Record Marks of 97/100 was scored by our student
Amritpal Singh - K J Somaiya Irfan sir Dadar
Batch code: K
14th July’19
(Sun, 8:45am to 1:15pm)
Lecture plan on Pg - 4
Extra lectures will be conducted on Every Tuesdays,
7:15pm to 9:30pm 8500*
* Students joining both D.O.M and H.T, will get a discount of Rs. 1000/- in each.
Note:
GV represents that these subjects are part of GATE and other Competitive Examination Syllabus and also have Viva Exam. Refer the last three pages for the list of Subject and UT Toppers. Crash Course (7 days x 4hrs) of I. C. Engine and M.M.C will be announced in Oct’19.
…. Fee Payment details on the next page
Address: Room 112, 1st floor, Pearl Centre, Next to Janta Cloth Market, Tulsi Pipe Road (Senapati Bapat Marg), Dadar (w).
Once out of Rly. Stn, take immediate right. It’s at 5 mins of walking distance from Rly. Stn.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com I Call: 9820341855 I Playstore App: Irfansir_Mech I WhatsApp: 9820341855
Admission Details
Admission started for all the batches of the New Semester. Full fees has to be paid at the time of admission. Fees can be paid from the
comfort of your home via BHIM App / Wallets / UPI etc by scanning the following QR code. Steps for making the payment is given in the image below.
Fees can also be paid by Cash / Debit card / Credit Card / Online Fund Transfer / or by Cheque in favour of “COURSENX EDUTECH PRIVATE LIMITED”. Call Sunny (Admission Staff) on 9820341855 to fix up an appointment for admission (Address given below). Alternately, if you cannot come for the admission for any reason, then you can pay the fees either by transferring funds or depositing cash in any ICICI Bank, in the favour of following Bank Account;
Name: COURSENX EDUTECH PRIVATE LIMITED Current Account no: 124805000652
ICICI Bank, S. V. Road Branch, Santacruz (w), Mumbai.
RTGS / NEFT / IFSC code: ICIC0001248
Note:
Once you have made the payment, please send the Pic of the Receipt / Acknowledgement of fund transfer either on WhatsApp (9820341855) or mail it to us at [email protected] along with the following details;
Full Name of the student: College: Mobile no: Email id: Address: Subjects you want to join and its Batch codes (given on the previous page):
Once your admission is done from our end, you will receive a confirmation sms of the fees paid and also your Digital I-card (in the form of QR Code) on the given mobile number. This QR code, which you will receive on your Mobile phone / Email, is to be shown before every lecture for the purpose of attendance.
Admission can be taken on the 1st lecture also (provided seats are available). But the fees will be accepted only in cash.
Address: Room 112, 1st floor, Pearl Centre, Next to Janta Cloth Market, Tulsi Pipe Road (Senapati Bapat Marg), Dadar (w).
Once out of Rly. Stn, take immediate right. It’s at 5 mins of walking distance from Rly. Stn.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com I Call: 9820341855 I Playstore App: Irfansir_Mech I WhatsApp: 9820341855
Heat Transfer Sem - V: Mech & Auto
Master the Subject with Effectively Designed Lecture Plan for Regular Batch at Dadar for Nov’19 Exam
Ideal Batch for scoring 20/20 in UT, 23+ in Viva and 75+ out of 80 in End Sem Exam. Timing for all the lectures; 8:45am to 1:15pm
Lec Date Day Topics covered
1 13th July’19 Batch starts
Sat Intro of Heat Transfer modes Concept & Formula Development: Fourier law & Thermal conductivity Analysis of HT through Plane & Composite wall - Series & Parallel
2 20th July’19 Sat
Concepts & Numericals on:
Convective Film Resistance - HT through Cylindrical & Spherical wall. Composite Wall Analysis - Cylindrical and Spherical wall
3 27th July’19 Sat Numericals on Composite wall …….. Contd
4 3rd Aug’19 Sat
Concepts & Numericals on: Composite walls with Variable Thermal Conductivity & Thermal Contact Resistance
Concepts & Numericals on: Critical radius of insulation. Application: Insulation of Steam & Refrigeration pipes & Electrical wires
5 10th Aug’19 Sat Extended surfaces (Fins): Derivation of;
Governing Differential Equation of HT through Fins Infinite fin, Finite fin with tip insulated & Finite fin loosing heat at the tip
6 15th Aug’19 Thurs
Independence Day
Efficiency & Effectiveness of fin Formula Development & Numericals on Fins
7 17th Aug’19 Sat
Concepts & Numericals on: Thermometric Well / Thermocouple pocket.
Derivations of: Unsteady State Heat Conduction
Transient Heat Conduction - Lumped Parameter Analysis
8 24th Aug’19 Sat
Formula Development & Numericals of: Unsteady State Heat Conduction
Thermocouple junction & Time constant Heisler charts: How to use?
9 31st Aug’19 Sat
Derivation of General 3D Heat Conduction Equation Cartesian coordinates Cylindrical coordinates
Numericals on above
10 4th Sept’19 Wed Ganpati Holiday
Concepts & Numericals: Internal Heat Generating Bodies. Numerical Methods Formula Development: Convective Heat Transfer
11 6th Sept’19 Fri Ganpati Holiday
Numericals on: Convective Heat Transfer Forced Convection - All cases Natural convection - All cases
12 7th Sept’19 Sat
Numericals - Contd…
Derivation based on Dimensional Analysis:
Pr)(Re,fNu
Pr),(GrfNu
13 14th Sept’19 Sat Heat Exchanger Analysis:
Classification, Overall HT coefficient & concept of Fouling factor L.M.T.D Derivation + Formula Development
14 21st Sept’19 Sat Numericals on: LMTD, Correction factor & Multi Tube - Multi Pass Heat Exchanger
15 28th Sept’19 Sat
Heat Exchangers - NTU method:
NTU - method: Concepts
Derivation + Formula Development NTU based Numericals
16 2nd Oct’19 Wed Gandhi Jayanti
NTU based Numericals…. Contd
Radiation Analysis: Concepts + Governing Laws + Formula Development
17 5th Oct’19 Sat Radiation Analysis:
Numericals on: Governing Laws of Radiation Concepts & Numericals on: Shape factor
18 12th Oct’19 Sat Irradiation & Radiosity. Radiation HT between Two Gray Bodies: Concepts + Numericals Radiation shields: Concepts + Numericals
19 19th Oct’19 Last lecture
Sat Radiation HT between Three Gray Bodies: Concepts + Numericals Boiling Regimes, Filmwise & Dropwise Condensation and Heat Pipe
Pg - 3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
D.O.M
Master the Subject with Effectively Designed Lecture Plan for Regular Batch at Dadar for Nov’19 Exam
Ideal Batch for scoring 20/20 in UT, 23+ in Viva and 75+ out of 80 in End Sem Exam. DOM would be entirely Numerical and Concept oriented subject.
Lec Date Day Time Topics covered
1 14th July’19 Batch starts
Sun 8:45am - 1:15pm Module - 1.2: Gyroscope
Analysis & Numericals on;
Concept & Derivation of: Gyroscopic couple Effect of Gyroscopic couple on:
Lateral misalignment of rigid disc mounted on shaft Naval ship - Pitching, Steering, Rolling & Yawing Aeroplane Two wheeler taking a turn.
2 16th July’19 Tue 7:15pm - 9:30pm
3 21st July’19 Sun 8:45am - 1:15pm Module - 1.1: Governors
Analysis & Numericals on;
Function & Types Force & Performance analysis of: Watt, Porter & Hartnell Governor Performance characteristics: Stability, Isochronism, Hunting, Sensitivity,
Governor Effort & Power
4 23rd July’19 Tue 7:15pm - 9:30pm
5 28th July’19 Sun 8:45am - 1:15pm
6 30th July’19 Tue 7:15pm - 9:30pm Module - 2: Engine Force Analysis
Analysis & Numericals on;
Static & Dynamic Forces in a slider crank mechanism Engine Forces Dynamically Equivalent system with and without Correction Couple
7 4th Aug’19 Sun 8:45am - 1:15pm
8 6th Aug’19 Tue 7:15pm - 9:30pm
9 11th Aug’19 Sun 8:45am - 1:15pm
Module - 3: Free Undamped Vibration Analysis & Numericals on;
Governing Equations of Vibration Steps involved in Vibration Analysis Free undamped Longitudinal, Transverse & Torsional vibration systems Formulation of D.E. using;
Newton’s method Energy method Lagrangian method Rayleigh method
10 13th Aug’19 Tue 7:15pm - 9:30pm
11 18th Aug’19 Sun 8:45am - 1:15pm
12 20th Aug’19 Tue 7:15pm - 9:30pm
13 25th Aug’19 Sun 8:45am - 1:15pm
14 27th Aug’19 Tue 7:15pm - 9:30pm
15 1st Sept’19 Sun 8:45am - 1:15pm
16 3rd Sept’19 Tue 5:30pm - 9:30pm Ganpati Holiday Module - 4: Free Damped Vibration
Analysis & Numericals on;
Viscously Damped System - under Free vibrations
Over Damped system Critically Damped system Under Damped system
Multi Spring, Multi Inertia and Multi Damper system Coulomb Damping
17 8th Sept’19 Sun 8:45am - 1:15pm
18 10th Sept’19 Tue 7:15pm - 9:30pm
19 15th Sept’19 Sun 8:45am - 1:15pm
20 17th Sept’19 Tue 7:15pm - 9:30pm
21 22nd Sept’19 Sun 8:45am - 1:15pm
Module - 5: Forced Vibration
Analysis & Numericals on;
Vibratory systems under Harmonic Force Excitation Vibratory systems under Rotating & Reciprocating Unbalance Vibratory systems under Motion Excitation Force Transmissibility & Vibration Isolation Seismic instruments - Vibrometer & Accelerometer
22 24th Sept’19 Tue 7:15pm - 9:30pm
23 29th Sept’19 Sun 8:45am - 1:15pm
24 1st Oct’19 Tue 7:15pm - 9:30pm
25 6th Oct’19 Sun 8:45am - 1:15pm
26 8th Oct’19 Tue 7:15pm - 9:30pm
27 13th Oct’19 Sun 8:45am - 1:15pm
28 15th Oct’19 Tue 7:15pm - 9:30pm Module - 6: Balancing
Analysis & Numericals on;
Static & Dynamic Balancing of Multi Rotor system Balancing of Reciprocating Masses in Engines
Single Cylinder Engine Multi - Cylinder Inline Engines
29 20th Oct’19 Sun 8:45am - 1:15pm
30 22nd Oct’19 Tue 7:15pm - 9:30pm
31 27th Oct’19 Sun 8:45am - 1:15pm
32 29th Oct’19 Last lecture
Tue 7:15pm - 9:30pm V - Engine Balancing. Critical Speed of Rotor (Whirling of Shafts) - Undamped & Damped.
Pg - 4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com I Call: 9820341855 I Playstore App: Irfansir_Mech I WhatsApp: 9820341855
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Record Holders & College Toppers
Note:
Due to lack of space, we have included the names of only those students, who scored more than or equal to 90/100. We have a consistent Track Record of producing maximum number of University Toppers over the last 15 years. The Best score has been shown in Red Font. Every student that joins us not only clears the exam in the 1st attempt but also builds up crystal clear concepts.
Sem - III: Mech / Auto / Prod
Name College Subject Marks
Akshay B. Shinde V.C.E.T Thermodynamics 95 / 100
Aman Sunil Pandit K J Somaiya Thermodynamics 93 / 100 Mohd. Soheb M.HS.S Thermodynamics 93 / 100
Rahul Shah V.C.E.T Thermodynamics 93 / 100
Sahil Utekar V.C.E.T Thermodynamics 93 / 100
Akagra Gupta D. J. Sanghvi Thermodynamics 92 / 100
Arshad Shaikh M.HS.S Thermodynamics 92 / 100
Ishak Shaikh Rizvi Thermodynamics 92 / 100
Shaikh Furquan Rizvi Thermodynamics 92 / 100
Ankita J Sheoran V.C.E.T Thermodynamics 91 / 100
Jeet Manoj Bhatt V.C.E.T Thermodynamics 91 / 100
Prem Vipul K.J.Somaiya Thermodynamics 91 / 100
Sanidhya Mathur D. J. Sanghvi Thermodynamics 91 / 100
Benjamin Samuel D. J. Sanghvi Thermodynamics 90 / 100
S. M. Husain Rizvi Thermodynamics 90 / 100
Sem - V: Mech / Auto
Name College Subject Marks
Shrikant Swaminathan R.G.I.T Heat Transfer 97 / 100
Prathmesh A. Temkar LTCOE Heat Transfer 96/ 100
Mrinal Rane B.V.C.O.E Heat Transfer 95 / 100
Akshay R. Sawant L. R.Tiwari Heat Transfer 94/ 100
Swapnil S. Kondgekar BVCOE Heat Transfer 94/ 100
Aniket Kadam L.R. Tiwari Heat Transfer 94 / 100
Dhanashree P. Shinde Rizvi Heat Transfer 93/ 100
Sahil Utekar VCET Heat Transfer 93/ 100
Alok J. Singh V.C.E.T Heat Transfer 93 / 100
Hardeep Singh Fr. Agnel Heat Transfer 93 / 100
Khan Mojib Theem Heat Transfer 93 / 100
Akbar Ali G. Husain M.H.S.S Heat Transfer 92/ 100
Amritlal Singh Sokhi K J Somaiya Heat Transfer 92/ 100
Darshan Gangar Saraswati Heat Transfer 91/ 100
Aftab Sara Rizvi Heat Transfer 91/ 100
Jeet Manoj Bhatt VCET Heat Transfer 91/ 100
Devanshu Jhakal Thakur Heat Transfer 91 / 100
Omkar Vikas K.J.Somaiya Heat Transfer 91 / 100
Shaikh Md. Umar Nasim MHSS Heat Transfer 90/ 100
Ankita J Sheoran VCET Heat Transfer 90/ 100
Omkar Desai Don Bosco Heat Transfer 90 / 100
Amritlal Singh Sokhi K J Somaiya Dynamics of Machinery 97/ 100
Omkar Nerurkar K J Somaiya Dynamics of Machinery 96/ 100
Hisham M. Tayyab Rizvi Dynamics of Machinery 95 / 100
Prashant Koparkar V.I.V.A Dynamics of Machinery 94 / 100
Kathan Mehta V.I.V.A Dynamics of Machinery 93 / 100
Raj Kishore V.I.V.A Dynamics of Machinery 93 / 100
Adnan M. Aslam M.H.S.S Dynamics of Machinery 92/ 100
Ankita J Sheoran VCET Dynamics of Machinery 92/ 100
Prashant Koparkar M.H.S.S Dynamics of Machinery 92/ 100
Shaikh Amir Hamza Rizvi Dynamics of Machinery 92/ 100
Adnan Tinwala M.H.S.S Dynamics of Machinery 91/ 100
Rohit R. Pandey R.G.I.T Dynamics of Machinery 91/ 100
Rohit S. Shinde DMCE Dynamics of Machinery 90/ 100
Tanmay A. Dhuri Thakur Dynamics of Machinery 90/ 100
Nabil Shaikh Rizvi Dynamics of Machinery 90/ 100
Omkar R Sawant K.G.C.E Dynamics of Machinery 90 / 100
Shaikh Umer Talib R.G.I.T Dynamics of Machinery 90 / 100
Sonal V. Vajale V.I.V.A I. C. Engine 96 / 100
Abhishek Pal Rizvi MMC: Crash 89 / 100
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Sem - VII: Mech / Auto
Name College Subject Marks
Waghela Pratik Hasmukh R.G.I.T Machine Design - II 92/ 100
Sneha More K. J. Somaiya CAD - CAM 92 / 100
Mohsin F. Sayyed LR Tiwari CAD - CAM 92 / 100
Mojib Khan Theem Op. Research 90 / 100
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w), Mumbai. Once out of Rly. Station (west side); take immediate right, 5 mins walking distance.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | WhatsApp: 9820341855 | Email: [email protected]
Unit Test Toppers
Note:
Due to lack of space, we have included the names of only those students, who have scored 20/20. We have a consistent Track Record of producing maximum number of UT Toppers and students with 10 pointers. The reasons our students easily score 20/20 are;
Perfectly Designed Lecture Plan, that ensures timely completion of syllabus. All variety of Numericals (even from the latest MU papers) are solved in the class. Most expected Q’s are continuously discussed throughout the lectures. High Quality Study Material that does not give any opportunity to the person checking the paper to deduct even one mark. Guidelines given by Irfan sir helps a lot, to complete the paper on time.
Name Subject Sem College Marks
Shaikh Emad Thermodynamics III MHSS 20/20
Saurabh S. Shah Thermodynamics III Rizvi 20/20
Ish Rakesh Raorane Thermodynamics III Thakur 20/20
Rane Omkar Amol Heat Transfer V Saraswati 20/20
Yadav Ashish Hiralal Heat Transfer V DMCE 20/20
Shadab Mukhtar Ahmed Heat Transfer V Rizvi 20/20
Dhanshree P Shinde Heat Transfer V Rizvi 20/20
Abhishek D. Puralkar Heat Transfer V KGCOE 20/20
Kesharwani Akshay Heat Transfer V Saraswati 20/20
Ankita Sheoran Heat Transfer V VCET 20/20
Satyam T. Kadam Heat Transfer V BVCOE 20/20
Jeet M. Bhatt Heat Transfer V VCET 20/20
Vishal R. Chaurasia Heat Transfer V Thakur 20/20
Pal Abhishek Heat Transfer V Rizvi 20/20
Swapnil S. Kondgekar Heat Transfer V BVCOE 20/20
Tanmay A Dhuri Heat Transfer V Thakur 20/20
Shubham R. Bodke Heat Transfer V DRIEMS 20/20
Prasad Ramu Patil Heat Transfer V VIVA 20/20
Rohit S. Shinde Dynamics of Machinery V DMCE 20/20
Ankita Sheoran Dynamics of Machinery V VCET 20/20
Shubham R. Bodke Dynamics of Machinery V DRIEMS 20/20
Mohammed Nabil Dynamics of Machinery V Rizvi 20/20
Mohammed Ishak Dynamics of Machinery V Rizvi 20/20
Shadab Mukhtar Ahmed Dynamics of Machinery V Rizvi 20/20
Prathmesh A. Temkar Dynamics of Machinery V LTCOE 20/20
Mote Akshaykumar Dynamics of Machinery V DMCE 20/20
Abhinesh Pandey Dynamics of Machinery V DMCE 20/20
Kesharwani Akshay Dynamics of Machinery V Saraswati 20/20
Shaikh Amir Hamza Dynamics of Machinery V Rizvi 20/20
Shaikh M. Ibrahim Dynamics of Machinery V Rizvi 20/20
Ashwin Sasichandran Dynamics of Machinery V DBIT 20/20
Harsh K. Gada Dynamics of Machinery V St. John's 20/20
Shardul S. Sathe Dynamics of Machinery V G. V. Acharya 20/20
Tanmay A Dhuri Dynamics of Machinery V Thakur 20/20
Giriraj P Jadeja Dynamics of Machinery V CSMIT 20/20
Satyam T. Kadam Dynamics of Machinery V BVCOE 20/20
Pal Abhishek Dynamics of Machinery V Rizvi 20/20
Satyam T. Kadam I. C. Engines V BVCOE 20/20
Prannoy Sandilyan Raj Machine Design - II VII Pillai 20/20
Mahajan L. Vijay Machine Design - II VII BCOE 20/20
Bhavesh Raja More Machine Design - II VII DMCE 20/20
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w), Mumbai.