semiconductor solutions WLS27 LED Strip Lights • Sturdy internal aluminum housings, encased in shatterproof, UV-stabilized, polycarbonate shells • Rugged, water-resistant IP67, IP68G and IP69K design • Available in eight lengths from 145 to 1130 mm • Daisy chain power to multiple lights • 590 nm yellow LED available LE Series Laser Measurement Sensor (LE250/LE550) • Ready to measure from 100 mm up to 1000 mm right out of the box • Analog (4 to 20 mA or 0 to 10 V) with selectable digital (NPN/PNP) output • Ideal for loop control, thickness measurement, roll diameter and positioning NEW NEW NEW Q4X Laser Distance Sensor • Reliable sensing range of 25 to 300 mm across a variety of target colors, materials and surfaces with multiple sensing modes in one device • Discrete and analog output models available • Robust 316L stainless steel construction—rated to IP69K • Simplified user experience with a clear distance readout from the angled four-digit display and easy setup with responsive buttons
Transcript
semiconductor solutions
P/N 152520 rev. D
Task LightsRugged, general-purpose LED lights in a variety of housing styles illuminate large areas with an even pattern.
TL50BL Beacon Tower Light— AC Models
TL50 Tower Light— now available with up to 7 segments
K30 Touch Button• Simple operation with
the touch of a finger
l ighting & indication
K30 and K50 Indicator Lights for Hazardous Areas• Intrinsically safe, non-sparking indicators• Rugged, fully encapsulated IP67 and
IP69K construction• Extensive approvals for every classified
zone or area, including IECEX approval
IndicatorsAvailable in many styles and packages from 8 to 80 mm with innovative mounting options
WLB32 Industrial LED Light Bar • Economical for general lighting applications
• AC and DC Models with lengths up to 1200 mm
• High lumen output
WLS27 LED Strip Lights • Sturdy internal aluminum housings, encased in
shatterproof, UV-stabilized, polycarbonate shells
• Rugged, water-resistant IP67, IP68G and IP69K design
• Available in eight lengths from 145 to 1130 mm
• Daisy chain power to multiple lights
• 590 nm yellow LED available
LE Series Laser Measurement Sensor (LE250/LE550)• Ready to measure from 100 mm up to 1000 mm right out of the box
• Analog (4 to 20 mA or 0 to 10 V) with selectable digital (NPN/PNP) output
• Ideal for loop control, thickness measurement, roll diameter and positioning
NEW
NEW
NEW
bannerengineering.comminneapolis, mn
1-888-373-6767
Request a Catalog
Request a catalog online at www.bannerengineering.com/catalog
or call 1.888.373.6767
Worldwide Presence with a Friendly, Local Approach
Q4X Laser Distance Sensor• Reliable sensing range of 25 to 300 mm across a variety of target colors,
materials and surfaces with multiple sensing modes in one device
• Discrete and analog output models available
• Robust 316L stainless steel construction—rated to IP69K
• Simplified user experience with a clear distance readout from the angled four-digit display and easy setup with responsive buttons
WLB92 Industrial LED Light Bar • Bright, high-quality, uniform light
• Rugged metal housing and shatterproof light cover
• Easy installation with a variety of mounting options
• AC models DLC certified and have a 5-year warranty
TL70 Modular Tower Light• User-configurable
• Provides audible and visual indication of multiple, simultaneous machine statuses
• Large 70 mm diameter for enhanced visibility
NEW
NEW
K90 Indicator Light• 90 mm dome• Bright, uniform illumination
from all directions and long distances
NEW
sensing
safety
vision
bannerengineering.com
iVu Plus Gen 2 Image Sensor• Multiple tools in one inspection
• Up to 30 inspections can be stored for fast product changeover
TG Models: Powerful, affordable inspection solution solves a wide variety of simple and complex applications such as solder ball inspection and LCD panel crack detection
BCR Models: Solve a variety of linear and 2D bar code applications (BCR models) including on-wafer barcodes
NEW
VS Series Miniature Sensors for Confined Areas• The VS1 is excellent for sensing glass
panels and is available in convergent mode and a 10 or 20 mm focus point
• The VS2 is available in opposed and convergent mode with an ultra-thin, 4.3 mm housing
• The VS3 uses coaxial optics on retroreflective models to eliminate blind areas at close range, and is available in opposed and retroreflective modes
• The VS4 is an ultra-thin opposed mode, right-angle sensor with a powerful 1.0 m sensing range
Low-Profile V-Series
Standard
EZ-SCREEN® Safety Light Screens• Families include Standard, Low-Profile, V-Series
and Type 2
• Cascading and integral muting options available
NEW
Emergency Stop Push Buttons• LED illuminated models enable easy
identification of tripped e-stop
• Lockable, safety bus, and terminal block models available
ultrasonics
wireless
Polarized Retroreflective
Convergent Remote Device
Interface
Fiber Optic
PresencePLUS® General-Purpose and Application-Specific Vision Sensors
Sensors That Think as Well as They Hear• Detect transparent and translucent objects
• Chemically-resistant models available
• Long-range sensing available
U-GAGE® S18U Ultrasonic Sensor• Straight or right-angle housing
• Range of 30 to 300 mm; unaffected by target color
• Rated IP67 and NEMA 6
U-GAGE® QT50U and T30U Chemically-Resistant Ultrasonic Sensors• FEP film coating for extra protection
• IP67 and NEMA 6P ratings
• Ideal for level control applications in processes that use corrosive or caustic materials
Wireless Q45 Temperature and Humidity Monitoring Solution• Provides a simple way to verify conditions in
locations that were once too difficult to access
• No software required
• Replace cables and extend the range of temperature and humidity signals with minimal effort
WORLD-BEAM® Q12 Series Sensors• IP67-rated
• Unique overmolded design delivers enhanced durability and shielding
• Available with a PFA coating rated NEMA 6P to protect the optics from harmful gases and vapors
• Scalable all-in-one solution with two-way wireless communication and visual status indication
• Clear, easy-to-read signal tower light
• Water-resistant IP65 housing
NEW
DF-G2
sensing
safety
vision
bannerengineering.com
iVu Plus Gen 2 Image Sensor• Multiple tools in one inspection
• Up to 30 inspections can be stored for fast product changeover
TG Models: Powerful, affordable inspection solution solves a wide variety of simple and complex applications such as solder ball inspection and LCD panel crack detection
BCR Models: Solve a variety of linear and 2D bar code applications (BCR models) including on-wafer barcodes
NEW
VS Series Miniature Sensors for Confined Areas• The VS1 is excellent for sensing glass
panels and is available in convergent mode and a 10 or 20 mm focus point
• The VS2 is available in opposed and convergent mode with an ultra-thin, 4.3 mm housing
• The VS3 uses coaxial optics on retroreflective models to eliminate blind areas at close range, and is available in opposed and retroreflective modes
• The VS4 is an ultra-thin opposed mode, right-angle sensor with a powerful 1.0 m sensing range
Low-Profile V-Series
Standard
EZ-SCREEN® Safety Light Screens• Families include Standard, Low-Profile, V-Series
and Type 2
• Cascading and integral muting options available
NEW
Emergency Stop Push Buttons• LED illuminated models enable easy
identification of tripped e-stop
• Lockable, safety bus, and terminal block models available
ultrasonics
wireless
Polarized Retroreflective
Convergent Remote Device
Interface
Fiber Optic
PresencePLUS® General-Purpose and Application-Specific Vision Sensors
Sensors That Think as Well as They Hear• Detect transparent and translucent objects
• Chemically-resistant models available
• Long-range sensing available
U-GAGE® S18U Ultrasonic Sensor• Straight or right-angle housing
• Range of 30 to 300 mm; unaffected by target color
• Rated IP67 and NEMA 6
U-GAGE® QT50U and T30U Chemically-Resistant Ultrasonic Sensors• FEP film coating for extra protection
• IP67 and NEMA 6P ratings
• Ideal for level control applications in processes that use corrosive or caustic materials
Wireless Q45 Temperature and Humidity Monitoring Solution• Provides a simple way to verify conditions in
locations that were once too difficult to access
• No software required
• Replace cables and extend the range of temperature and humidity signals with minimal effort
WORLD-BEAM® Q12 Series Sensors• IP67-rated
• Unique overmolded design delivers enhanced durability and shielding
• Available with a PFA coating rated NEMA 6P to protect the optics from harmful gases and vapors
