SS-SERENATA

I n s t r u c t i o n M a n u a l

SerenataUmbrella Light

TIMEPOWERFM/AM

F/C P/S VOL- VOL+UPDOWN

www.simplyshade.com

©2015 SimplyShade - All Rights Reserved. 7/15

A - Serenata F - Audio CableB - Battery Pack G - Adapter SleeveC - Charger H - Universal Hub Adapter (screws included,D- Remote Control adapter for non-SimplyShade umbrellas)E - Music Source Holder I - Cushion Grips (3 extra size sets included)

Thank you for your purchase of SimplyShade’s Serenata Wireless UmbrellaLight and Media Center.

Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella light, read andfollow this assembly and operation guide.

SERENATA CHECKLIST

A B C

D E F

G H I

1 10

S A F E T Y P R E C A U T I O N S :• If unit is exposed to light moisture, light to medium rain; allow unit to air dry for

24 hours before reuse.

WARNING: The Serenata umbrella light is not waterproof. If the light isimmersed in a pool or spa or exposed to heavy rain the unit will be damagedand negate the 1 year warranty.

Note:• Position the Serenata in a location that will protect it from direct sunlight and

moisture.• Charge the battery for 8 hours prior to first use.• Do not overcharge the battery. Remove when indicator light turns green.

WARRANTY:

The manufacturer warrants that thisumbrella, when subject to normal andproper use, will be free frommanufacturing defects for a period ofone year from the original date of purchase. Should any defect occur during the specified time period, themanufacturer will repair, replace, or provide replacement parts, at its ownoption. Limited warranty against fabric fading, based on fabric grade. Warranty is not transferable.

We will not warrant any claim coverageunless both the original sales receipt andrequest form are sent to us. Any itemsthat are returned for warranty or nonwarranty purposes must be issued aReturn Authorization Number. Only

upon issuance of an RA # and inspectionby our QC department will credit orreplacement of umbrella be issued. It isthe customer’s responsibility to pay thefreight on return products orreplacement parts. ALL RETURNEDITEMS MUST INCLUDE THE RA#CLEARLY WRITTEN ON THERETURN PACKAGE or package will be refused by our warehouse personnel.

NOTE: Damages and failure caused by improper use due to neglect of reasonableand necessary care are not covered bythis warranty.

Additionally, acts of nature (including butnot limited to wind, hurricanes, tornadoes,and storms) are not covered by thiswarranty.

2

S T E P 1 Charging the Battery Packa. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 1).b. Attach the charger to the battery pack and plug into any 110V power source.

The battery is fully charged when the indicator light changes to green (Fig. 2). Note: Charge battery for 8 hours before first use.

(Fig. 1)

S T E P 2 Attaching the Serenata to Umbrellaa. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 3).

b. For centerpost market umbrellas, slide the Serenata onto the center post. Note: It may be necessary to squeeze the 2 lock and release tabs on the Serenata to fit onto post. (See page 7)

For SimplyShade sidepost cantilever style umbrellas, attach Serenata onto adapter on lower hub.

For all other sidepost cantilever styles, attached supplied Adapter Sleeve (G) and Universal Hub Adapter (H) to the lower hub and tighten with supplied screws. Swap out cushions grips on Serenata with smallest cushion grip size. (See page 8)

c. Attach Serenata onto adapter.

(Fig. 3)

9

(Fig. 2)

Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 32). Slidethe Serenata onto Universal Hub Adapter or center post (Fig. 33). If using UniversalHub Adapter, swap out cushion grips with smallest cushion grip size. For all other hubsor center post, change cushion grip size if necessary. It may be necessary to squeezethe 2 lock and release tabs on the Serenata to fit onto post.

(Fig. 33)

(Fig. 32)

Secure Serenata to Universal Adapter Hub by sliding small screws on Hub into holeslocated on top of Serenata. Once Serenata is securely on light adapter or center post,slide battery pack back onto Serenata (Fig. 35). Your Serenata is now ready for use(Fig. 36 ).

(Fig. 34)

(Fig. 35)

(Fig. 36)

3 8

(Fig. 4)

(Fig. 5)

S T E P 3 Adjusting the Light Settingsa. To turn on the lights, switch the battery pack to the “ON” position (Fig. 4).b. To adjust the brightness, simply press the “F/C” button on the  Serenata (Fig. 5)

or press the “LIGHT (+ or -)” button on the remote control (Fig. 6).

(Fig. 6)

ONF/C

LIGHT +LIGHT -

To OPEN and ATTACH SERENATA to a non-SimplyShade Umbrella:Remove screw from cantilever hub (Fig. 27a). Remove second screw diagonally fromother screw (Fig. 27b). Screw Adapter Sleeve to Universal Hub Adapter and tighten(Fig. 28).

(Fig. 27a)

(Fig. 27b)

(Fig. 28)

(Fig. 29)

(Fig. 30)

Attach Universal Hub Adapter to hub on cantilever and secure using (2) suppliedscrews (Fig. 29). Tighten screws with nuts on opposite end (Fig. 30). Screw in 2 small screwsonto Universal Hub Adapter (Fig. 31). Do not screw all the way in.

(Fig. 31)

47

f. To scan the radio stations, simply press & hold the “UP” or “DOWN” button (Fig. 10) or “TUNE (+ or -)” button (Fig. 11) for at least 3 seconds. Scanning will stop automatically when a station is located.

g. To adjust the volume, press the “Vol. (+ or -)” button on the Serenata (Fig. 12) or on the remote control (Fig. 13).

(Fig. 12) (Fig. 13)

S T E P 4 Programming the Radioa. Switch the battery pack to the “ON” position.b. Press the “POWER/FM/AM” button on the Serenata (Fig. 7) or press the

“Power” button on the remote control (Fig. 8).c. Position the Serenata for proper reception.

d. To select FM or AM, press the “POWER/FM/AM” button once again on either the Serenata (Fig. 9) or “POWER” on remote control (Fig. 8).

e. To select a radio station, press the “UP” or “DOWN” button on the Serenata (Fig. 10) or press the “TUNE (+ or -)” button on the remote control (Fig. 11).

(Fig. 7) (Fig. 8)

(Fig. 9) (Fig. 10) (Fig. 11)

To ATTACH SERENATA Umbrella Light to Cantilever Umbrella:Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 21). After loosening, pull down light adapter post (Fig. 22) to attach theSERENATA umbrella light (sold separately).

(Fig. 21) (Fig. 22)

Additional Features

To OPEN and ATTACH SERENATA to SimplyShade Umbrella:Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 23). Slidethe Serenata onto light adapter or center post. It may be necessary to squeeze the 2lock and release tabs on the Serenata to fit onto post (Fig. 24). Once Serenata issecurely on light adapter or center post, slide battery pack back onto Serenata (Fig. 25).Your Serenata is now ready for use (Fig. 26).

(Fig. 24)

(Fig. 23)

(Fig. 25)(Fig. 26)

65

S T E P 7 a. Press & hold the “F/C” button on the Serenata (Fig. 18) or the remote control

(Fig. 19) for at least 2 seconds. Fahrenheit will display on the screen.b. Press & hold the “F/C” button again for at least 2 seconds and Celsius will

display on the screen.

S T E P 8 iPod/MP3 Playera. Attach music source holder to Serenata (Fig. 20). Insert iPod into music source

holder (Fig. 21). b. Turn on the radio.c. Turn on the iPod/MP3 player and select the music.d. Insert one end of the audio cable into the output socket on the MP3 player, and

then insert the other end of the cable into the input socket on the Serenata (Fig. 22).

d. To convert back to radio, simply unplug the cable.

(Fig. 18) (Fig. 19)

b. Adjust the hour by pressing the “Vol. (+ or -)” button.c. Press & release the “TIME” button again and the “minute” will flash.d. Adjust the “minute” by pressing the “Vol. (+ or -)” button.e. Press & release the “TIME” button once again to save the settings.

(Fig. 16) (Fig. 17)

S T E P 6 Setting the Timea. Press & release the “TIME” button on the Serenata (Fig. 16) or the remote

control (Fig. 17). The “hour” will flash on the display screen.

S T E P 5 Using the Radioa. Turn the radio on and tune-in the station you want to save.b. Press & hold the “P/S” button for at least two seconds on the Serenata

(Fig. 14) or on the remote control (Fig. 15). The P/S channel will flash on the display screen.

c. Press the “Vol. (+ or -)” button to select P/S channel.d. Press & hold the “P/S” button once again for at least 2 seconds to save the

radio station. NOTE: Setup will automatically void if Step 5, Fig. 15 is not completed within 10 seconds.

e. The memory can save up to 5 stations on both FM and AM bands.

(Fig. 14) (Fig. 15)

(Fig. 22)

(Fig. 20)(Fig. 21)

Upside Down Right side Up(Fig. 21)

65

S T E P 7 a. Press & hold the “F/C” button on the Serenata (Fig. 18) or the remote control

(Fig. 19) for at least 2 seconds. Fahrenheit will display on the screen.b. Press & hold the “F/C” button again for at least 2 seconds and Celsius will

display on the screen.

S T E P 8 iPod/MP3 Playera. Attach music source holder to Serenata (Fig. 20). Insert iPod into music source

holder (Fig. 21). b. Turn on the radio.c. Turn on the iPod/MP3 player and select the music.d. Insert one end of the audio cable into the output socket on the MP3 player, and

then insert the other end of the cable into the input socket on the Serenata (Fig. 22).

d. To convert back to radio, simply unplug the cable.

(Fig. 18) (Fig. 19)

b. Adjust the hour by pressing the “Vol. (+ or -)” button.c. Press & release the “TIME” button again and the “minute” will flash.d. Adjust the “minute” by pressing the “Vol. (+ or -)” button.e. Press & release the “TIME” button once again to save the settings.

(Fig. 16) (Fig. 17)

S T E P 6 Setting the Timea. Press & release the “TIME” button on the Serenata (Fig. 16) or the remote

control (Fig. 17). The “hour” will flash on the display screen.

S T E P 5 Using the Radioa. Turn the radio on and tune-in the station you want to save.b. Press & hold the “P/S” button for at least two seconds on the Serenata

(Fig. 14) or on the remote control (Fig. 15). The P/S channel will flash on the display screen.

c. Press the “Vol. (+ or -)” button to select P/S channel.d. Press & hold the “P/S” button once again for at least 2 seconds to save the

radio station. NOTE: Setup will automatically void if Step 5, Fig. 15 is not completed within 10 seconds.

e. The memory can save up to 5 stations on both FM and AM bands.

(Fig. 14) (Fig. 15)

(Fig. 22)

(Fig. 20)(Fig. 21)

Upside Down Right side Up(Fig. 21)

47

f. To scan the radio stations, simply press & hold the “UP” or “DOWN” button (Fig. 10) or “TUNE (+ or -)” button (Fig. 11) for at least 3 seconds. Scanning will stop automatically when a station is located.

g. To adjust the volume, press the “Vol. (+ or -)” button on the Serenata (Fig. 12) or on the remote control (Fig. 13).

(Fig. 12) (Fig. 13)

S T E P 4 Programming the Radioa. Switch the battery pack to the “ON” position.b. Press the “POWER/FM/AM” button on the Serenata (Fig. 7) or press the

“Power” button on the remote control (Fig. 8).c. Position the Serenata for proper reception.

d. To select FM or AM, press the “POWER/FM/AM” button once again on either the Serenata (Fig. 9) or “POWER” on remote control (Fig. 8).

e. To select a radio station, press the “UP” or “DOWN” button on the Serenata (Fig. 10) or press the “TUNE (+ or -)” button on the remote control (Fig. 11).

(Fig. 7) (Fig. 8)

(Fig. 9) (Fig. 10) (Fig. 11)

To ATTACH SERENATA Umbrella Light to Cantilever Umbrella:Loosen the light adapter built into the umbrella runner by turning counter-clockwise

(Fig. 21). After loosening, pull down light adapter post (Fig. 22) to attach theSERENATA umbrella light (sold separately).

(Fig. 21) (Fig. 22)

Additional Features

To OPEN and ATTACH SERENATA to SimplyShade Umbrella:Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 23). Slidethe Serenata onto light adapter or center post. It may be necessary to squeeze the 2lock and release tabs on the Serenata to fit onto post (Fig. 24). Once Serenata issecurely on light adapter or center post, slide battery pack back onto Serenata (Fig. 25).Your Serenata is now ready for use (Fig. 26).

(Fig. 24)

(Fig. 23)

(Fig. 25)(Fig. 26)

3 8

(Fig. 4)

(Fig. 5)

S T E P 3 Adjusting the Light Settingsa. To turn on the lights, switch the battery pack to the “ON” position (Fig. 4).b. To adjust the brightness, simply press the “F/C” button on the  Serenata (Fig. 5)

or press the “LIGHT (+ or -)” button on the remote control (Fig. 6).

(Fig. 6)

ONF/C

LIGHT +LIGHT -

To OPEN and ATTACH SERENATA to a non-SimplyShade Umbrella:Remove screw from cantilever hub (Fig. 27a). Remove second screw diagonally fromother screw (Fig. 27b). Screw Adapter Sleeve to Universal Hub Adapter and tighten(Fig. 28).

(Fig. 27a)

(Fig. 27b)

(Fig. 28)

(Fig. 29)

(Fig. 30)

Attach Universal Hub Adapter to hub on cantilever and secure using (2) suppliedscrews (Fig. 29). Tighten screws with nuts on opposite end (Fig. 30). Screw in 2 small screwsonto Universal Hub Adapter (Fig. 31). Do not screw all the way in.

(Fig. 31)

2

S T E P 1 Charging the Battery Packa. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 1).b. Attach the charger to the battery pack and plug into any 110V power source.

The battery is fully charged when the indicator light changes to green (Fig. 2). Note: Charge battery for 8 hours before first use.

(Fig. 1)

S T E P 2 Attaching the Serenata to Umbrellaa. Grab firmly and pull the battery pack from the Serenata to remove (Fig. 3).

b. For centerpost market umbrellas, slide the Serenata onto the center post. Note: It may be necessary to squeeze the 2 lock and release tabs on the Serenata to fit onto post. (See page 7)

For SimplyShade sidepost cantilever style umbrellas, attach Serenata onto adapter on lower hub.

For all other sidepost cantilever styles, attached supplied Adapter Sleeve (G) and Universal Hub Adapter (H) to the lower hub and tighten with supplied screws. Swap out cushions grips on Serenata with smallest cushion grip size. (See page 8)

c. Attach Serenata onto adapter.

(Fig. 3)

9

(Fig. 2)

Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 32). Slidethe Serenata onto Universal Hub Adapter or center post (Fig. 33). If using UniversalHub Adapter, swap out cushion grips with smallest cushion grip size. For all other hubsor center post, change cushion grip size if necessary. It may be necessary to squeezethe 2 lock and release tabs on the Serenata to fit onto post.

(Fig. 33)

(Fig. 32)

Secure Serenata to Universal Adapter Hub by sliding small screws on Hub into holeslocated on top of Serenata. Once Serenata is securely on light adapter or center post,slide battery pack back onto Serenata (Fig. 35). Your Serenata is now ready for use(Fig. 36 ).

(Fig. 34)

(Fig. 35)

(Fig. 36)

A - Serenata F - Audio CableB - Battery Pack G - Adapter SleeveC - Charger H - Universal Hub Adapter (screws included,D- Remote Control adapter for non-SimplyShade umbrellas)E - Music Source Holder I - Cushion Grips (3 extra size sets included)

Thank you for your purchase of SimplyShade’s Serenata Wireless UmbrellaLight and Media Center.

Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella light, read andfollow this assembly and operation guide.

SERENATA CHECKLIST

A B C

D E F

G H I

1 10

S A F E T Y P R E C A U T I O N S :• If unit is exposed to light moisture, light to medium rain; allow unit to air dry for

24 hours before reuse.

WARNING: The Serenata umbrella light is not waterproof. If the light isimmersed in a pool or spa or exposed to heavy rain the unit will be damagedand negate the 1 year warranty.

Note:• Position the Serenata in a location that will protect it from direct sunlight and

moisture.• Charge the battery for 8 hours prior to first use.• Do not overcharge the battery. Remove when indicator light turns green.

WARRANTY:

The manufacturer warrants that thisumbrella, when subject to normal andproper use, will be free frommanufacturing defects for a period ofone year from the original date of purchase. Should any defect occur during the specified time period, themanufacturer will repair, replace, or provide replacement parts, at its ownoption. Limited warranty against fabric fading, based on fabric grade. Warranty is not transferable.

We will not warrant any claim coverageunless both the original sales receipt andrequest form are sent to us. Any itemsthat are returned for warranty or nonwarranty purposes must be issued aReturn Authorization Number. Only

upon issuance of an RA # and inspectionby our QC department will credit orreplacement of umbrella be issued. It isthe customer’s responsibility to pay thefreight on return products orreplacement parts. ALL RETURNEDITEMS MUST INCLUDE THE RA#CLEARLY WRITTEN ON THERETURN PACKAGE or package will be refused by our warehouse personnel.

NOTE: Damages and failure caused by improper use due to neglect of reasonableand necessary care are not covered bythis warranty.

Additionally, acts of nature (including butnot limited to wind, hurricanes, tornadoes,and storms) are not covered by thiswarranty.

SS-SERENATA

I n s t r u c t i o n M a n u a l

SerenataUmbrella Light

TIMEPOWERFM/AM

F/C P/S VOL- VOL+UPDOWN

www.simplyshade.com

©2015 SimplyShade - All Rights Reserved. 7/15