The Series 100 High Performance Liquid Filter Bag is con- structed of polypropylene melt blown microfibers, allowing for very fine particle capture at high efficiencies. All 3M Brand Se- ries 100 Liquid Filter Bags are over 90% efficient at their suggested application rating. The 3M Filter offers an excellent balance of high efficiencies with very low initial pressure drops. The bag construction makes this filter an easy to use, conve- nient, high performance alternative to filter cartridges. The 3M Series 100 Liquid Filter Bag can also adsorb unwanted trace oils that frequently occur in processed fluids. The high amount of surface area due to the polypropylene microfiber construction, results in oil holding capacities from 10-20 times the filter’s own weight. APPLICATIONS Prefilters or Final Filters for: MATERIALS OF CONSTRUCTION Filter Media: Meltblown polypropylene microfiber filter media provides high particle removal efficiency for high quality filtration with broad chemical compatibility. No silicone is intentionally used in materials of construction or in manufacturing. The raw materials composing these filters are FDA compliant according to CFR Title 21. Sealing Ring: Available in “A” - Stainless Steel, and “B” - Polypropylene. PERFORMANCE DATA Loading Capacity Product Model Number 123 124 125 126 128 Dirt - grams at 25 gpm (5.6 cu m/hr) 125 121 146 155 351 Mineral Oil - grams at saturation 1385 2280 2050 1640 2845 Loading: The data above shows typical loading capacities of the different micron rated filters. Loading capacity is deter- mined by challenging a filter with a dispersion of silica test dust in water at the recommended flow rate. Pressure drop is moni- tored and testing is terminated at 35 psid (2.4 bar). The loading capacity reported is the dry weight gain of the bag. Particle Removal Efficiency (microns) Product Number 123 124 125 126 128 Efficiency @95% 1.5 2.5 7.5 10 .0 34.0 Efficiency @90% 1.3 1.3 6.5 8.0 29.0 Efficiency @75% 0.9 1.0 2.5 7.0 21.0 Efficiency @50% <0.7 <1.0 <1.0 4.5 7.0 Efficiency: The Series 100 High Performance Filter Bags are rated using a silica test challenge in water at 25 gpm (5.7 cu m/hr). The results reported are typical initial efficiencies taken within ten minutes of the start of the test and are cumulative data. OPERATING CONDITIONS Maximum Operating Temperature 180° F (82° C) Recommended Flow (in water): 25 gpm( 5.7 cu m/hr) Suggested Maximum Flow (in water): 50 gpm{11 cu m/hr) Suggested Maximum Differential Pressure 35 psid (2.4 bar) Series 100 - High Performance Liquid Filter Bags ® a 3M company � Acids and bases � Amines � Carbon beds � Completion fluids � Deep wells � Desalination � DI resins � Glycol � Groundwater clean-up � Machine coolants � Makeup water � Organic solvents � Photo chemicals � Plating solutions � RO membranes � Storm Water � Wastewater � Waterflood
Transcript
The Se ries 100 High Per for mance Liq uid Fil ter Bag is con -structed of poly propy lene melt blown microfibers, al low ing forvery fine par ti cle cap ture at high ef fi cien cies. All 3M Brand Se -ries 100 Liq uid Fil ter Bags are over 90% ef fi cient at theirsug gested ap pli ca tion rat ing. The 3M Fil ter of fers an ex cel lentbal ance of high ef fi cien cies with very low ini tial pres sure drops. The bag con struc tion makes this fil ter an easy to use, con ve -nient, high per for mance al ter na tive to fil ter car tridges.The 3M Se ries 100 Liq uid Fil ter Bag can also ad sorb un wanted trace oils that fre quently oc cur in pro cessed flu ids. The highamount of sur face area due to the poly propy lene microfibercon struc tion, re sults in oil hold ing ca pac i ties from 10-20 timesthe fil ter’s own weight.
AP PLI CA TIONS
Prefilters or Fi nal Fil ters for:
MA TE RI ALS OF CON STRUC TION
Fil ter Me dia:Meltblown poly propy lene microfiber fil ter me dia pro vides highpar ti cle re moval ef fi ciency for high qual ity fil tra tion with broadchem i cal com pat i bil ity.No sil i cone is in ten tion ally used in ma te ri als of con struc tion orin man u fac tur ing.The raw ma te ri als com pos ing these fil ters are FDA com pli antac cord ing to CFR Ti tle 21.
Seal ing Ring:Avail able in “A” - Stain less Steel, and “B” - Poly propy lene.
PER FOR MANCE DATA
Load ing Ca pac ity
Prod uct Model Num ber 123 124 125 126 128
Dirt - grams at 25 gpm (5.6 cu m/hr) 125 121 146 155 351
Mineral Oil - grams at saturation 1385 2280 2050 1640 2845
Load ing: The data above shows typ i cal load ing ca pac i ties ofthe dif fer ent mi cron rated fil ters. Load ing ca pac ity is de ter -mined by chal leng ing a fil ter with a dis per sion of sil ica test dust in wa ter at the rec om mended flow rate. Pres sure drop is mon i -tored and test ing is ter mi nated at 35 psid (2.4 bar). The load ing ca pac ity re ported is the dry weight gain of the bag.
Par ti cle Re moval Ef fi ciency (mi crons)
Prod uct Num ber 123 124 125 126 128
Efficiency @95% 1.5 2.5 7.5 10 .0 34.0
Efficiency @90% 1.3 1.3 6.5 8.0 29.0
Efficiency @75% 0.9 1.0 2.5 7.0 21.0
Efficiency @50% <0.7 <1.0 <1.0 4.5 7.0
Ef fi ciency: The Se ries 100 High Per for mance Fil ter Bags arerated us ing a sil ica test chal lenge in wa ter at 25 gpm (5.7 cum/hr). The re sults re ported are typ i cal ini tial ef fi cien cies takenwithin ten min utes of the start of the test and are cu mu la tivedata.
OP ER AT ING CON DI TIONS
Maximum Operating Temperature 180° F (82° C)
Recommended Flow (in water): 25 gpm( 5.7 cu m/hr)
Suggested Maximum Flow (in water): 50 gpm{11 cu m/hr)
Suggested Maximum DifferentialPressure
35 psid (2.4 bar)
Series 100 - High Performance Liquid Filter Bags
®
a 3M company
� Ac ids and bases� Amines� Car bon beds� Com ple tion flu ids� Deep wells� De sa li na tion� DI res ins� Gly col� Ground wa ter clean-up
� Ma chine cool ants� Makeup wa ter� Or ganic sol vents� Photo chem i cals� Plat ing so lu tions� RO mem branes� Storm Wa ter� Wastewater� Waterflood
CLEAN PRES SURE DROP VER SUS FLOW RATE (PSID) Pres sure Drop: The Se ries 100 High Per for mance Fil ter Bagshave low ini tial pres sure drop ( p) in wa ter as the chart in di -cates. The chart in cludes the pres sure drop of a typ i cal sin gleves sel to as sist you in siz ing your fil ter sys tem.
DIS POSALDis posal of used fil ter bags must com ply with ap pli ca ble fed -eral, state and lo cal laws and reg u la tions.
WAR RANTYSeller war rants its equip ment against de fects in work man ship and ma te rial for a pe riod of 12 months from date of ship ment from the fac tory un der nor mal use and ser vice and oth er wise when such equip ment isused in ac cor dance with in struc tions fur nished by Seller and for pur poses dis closed in writ ing at the timeof pur chase, if any. Any un au tho rized al ter ation or mod i fi ca tion of the equip ment by Buyer will void thiswar ranty. Seller’s li a bil ity un der this war ranty shall be lim ited to the re place ment or re pair, F.O.B. point of man u fac ture, of any de fec tive equip ment or part which, hav ing been re turned to the fac tory, trans por ta -tion charges pre paid, has been in spected and de ter mined by the Seller to be de fec tive. THIS
WAR RANTY IS IN LIEU OF ANY OTHER WAR RANTY, EI THER EX PRESSED OR IM PLIED, AS TODE SCRIP TION, QUAL ITY, MER CHANTABIL ITY, FIT NESS FOR ANY PAR TIC U LAR PUR POSE ORUSE, OR ANY OTHER MAT TER. Un der no cir cum stances shall Seller be li a ble to Buyer or any thirdparty for any loss of prof its or other di rect or in di rect costs, ex penses, losses or con se quen tial dam agesaris ing out of or as a re sult of any de fects in or fail ure of its prod ucts or any part or parts thereof or aris ing out of or as a re sult of parts or com po nents in cor po rated in Seller’s equip ment but not sup plied by theSeller.
a 3M company
0.0
0.1
0.2
0.3
0.4
0.5
0 10 20 30 40 50 60
123
124
125
126
128
Pres
sure
Dro
p (p
sid)
Flow Rate (gpm)
Prod uct Model Num ber
Sealing RingMaterial
Mi cron Rat ing Ini tial Ef fi ciency
Part Num ber Length Outer Di am e terCar tridges per
Im por tant No ticeCUNO MAKES NO WAR RAN TIES, EX PRESS OR IM PLIED, IN CLUD ING, BUT NOT LIM ITEDTO, ANY IM PLIED WAR RANTY OF MER CHANT ABIL ITY OR FIT NESS FOR A PAR TIC U LARPUR POSE. Since a va ri ety of fac tors can af fect the use and per for mance of a CUNO prod uct ina par tic u lar ap pli ca tion, some of which are uniquely within the user’s knowl edge and con trol, user is re spon si ble for de ter min ing whether or not the CUNO prod uct is fit for a par tic u lar pur pose and suit able for user’s method of ap pli ca tion.
