EXPLOSION PROOF & DUST IGNITION PROOF THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
8265 Series of EnclosuresFeatures:• Flexible modular design,
available in six enclosure sizes.
• Available with or without glass windows.
• Mounting lugs are integrated.
• Made of Copper Free Aluminum (Marine Grade).
• Easy access to enclosure interior.
• Global Certifications.
• Compact square enclosures with threaded covers.
• Cover Gasket is standard on every assembly.
ENCLOSURES
J
Series 8265
- Series 8265 ENCLOSURES
EXPLOSION PROOF & DUST IGNITION PROOF THREADED ENCLOSURES
Enclosure with Blank Cover
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
CLASSIFICATIONSNEC & CEC: Gas Explosion Protection Class I, Division 1, Groups A, B, C & D Class I, Zone 1, Groups IIC
Dust Explosion Protection Class II, Division 1, Groups E, F & G Class III
Environmental Protection Type 3, 4, 4X, 7 & 9 Ingress Protection IP66
FILE No. E307783
ATEX Zone 1, 2, 21 & 22
II 2G Ex db IIC Gb
II 2D Ex tb IIIC Gb
PTB 06 ATEX 1023 U
IECEx Zone 1, 2, 21 & 22
Ex db IIC Gb
Ex tb IIIC Db
IECEx PTB 07.0027U
Ambient Temperature range +60°C (140°F) -60°C (-76°F)
APPLICATIONS
The Series 8265 of threaded enclosures are for use in hazardous (classified) locations as specified above under CLASSIFICATIONS. They are designed to contain ordinary location electrical components for instrumentation and motor control. The six sizes are available with or without windows, and come either with cus-tomized, factory drilled and tapped entry open-ings, or they also can be field modified. (see Field Drilling/Tapping Information on Page J2).
J1
Description
Ambient Temperature
For Groups A, B, C & D
and for IIC, IIB & IIA
+50°C (+122°F) max. -25°C (-13°F) min.
For Groups C & D
and for IIB & IIA
+50°C (+122°F) max.
-50°C (-58°F) min.
(8265/61-0000 only)
(8265/62-0000 only)
(8265/63-0000 only)
For Groups E, F & G +40°C (+104°F) max-25°C (-13°F) min.
Max. Interrupting Capacity of Installed Components
10 kA RMSSymmetrical Amperes
Window Material Borosilicate Glass
Enclosure Material Copper Free Aluminum (Marine Grade)
Tool for Cover Opening Provided
Technical Data
}}
Catalog Number
External DimensionsL x W x D Description Article
Number
Mounting Plate Article Number
8265/61-0000 4.92” x 4.92” x 5.20” (125 x 125 x 132 mm)
Empty enclosure w/o window 211114 208862
8265/62-0000 6.10” x 6.10” x 5.20” (155 x 155 x 132 mm)
Empty enclosure w/o window 165778 143484
8265/63-0000 7.68” x 7.68” x 6.77” (195 x 195 x 172 mm)
Empty enclosure w/o window 165779 143485
8265/64-0000 9.29” x 9.29” x 8.94” (236 x 236 x 227 mm)
Empty enclosure w/o window 165780 143486
8265/65-0000 11.22” x 11.22” x 9.05” (285 x 285 x 230 mm)
Empty enclosure w/o window 211128 143487
8265/66-0000 13.19” x 13.19” x 11.06” (335 x 335 x 281 mm)
Empty enclosure w/o window 202091 143488
Ordering Information
EXPLOSION PROOF & DUST IGNITION PROOF THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
ENCLOSURES
J2
- Series 8265
Enclosure with Window Cover
CLASSIFICATIONSNEC & CEC: Gas Explosion Protection Class I, Division 1, Groups A, B, C & D Class I, Zone 1, Groups IIC
Dust Explosion Protection Class II, Division 1, Groups E, F & G Class III
Environmental Protection Type 3, 4, 4X, 7 & 9 Ingress Protection IP66
FILE No. E307783
ATEX Zone 1, 2, 21 & 22
II 2G Ex db IIC Gb
II 2D Ex tb IIIC Gb
PTB 06 ATEX 1023 U
IECEx Zone 1, 2, 21 & 22
Ex db IIC Gb
Ex tb IIIC Db
IECEx PTB 07.0027U
Ambient Temperature range +60°C (140°F) -60°C (-76°F)
APPLICATIONS
The Series 8265 of threaded enclosures are for use in hazardous (classified) locations as specified above under CLASSIFICATIONS. They are designed to contain ordinary location electrical components for instrumentation and motor control. The six sizes are available with or without windows, and come either with cus-tomized, factory drilled and tapped entry open-ings, or they also can be field modified. (see Field Drilling/Tapping Information on Page J2).
Catalog Number
External DimensionsL x W x D Description Article
Number
Mounting Plate Article Number
8265/61-00204.92” x 4.92” x 5.20” (125 x 125 x 132 mm)
Empty enclosure with window 211089 208862
8265/62-00206.10” x 6.10” x 5.20” (155 x 155 x 132 mm)
Empty enclosure with window 165781 143484
8265/63-00207.68” x 7.68” x 6.77” (195 x 195 x 172 mm)
Empty enclosure with window 165782 143485
8265/64-00209.29” x 9.29” x 8.94” (236 x 236 x 227 mm)
Empty enclosure with window 165783 143486
8265/65-002011.22” x 11.22” x 9.05” (285 x 285 x 230 mm)
Empty enclosure with window 211064 143487
8265/66-002013.19” x 13.19” x 11.06” (335 x 335 x 281 mm)
Empty enclosure with window 202082 143488
Ordering Information
For Quick Ship entry specification & location installation see pages J4-J5
For detailed entry guidance see pages J6-J7
J3
ENCLOSURES
EXPLOSION & DUST IGNITION PROOF THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
- Series 8265
Entry is limited by arrangment & diameter.Please note: All holes located on the same side of an enclosure must reference the same standard hole pattern.
Standard Hole Pattern Options
Size 1 8265/61
050 M20
075 M25
100 M32
Size 2 8265/62
050 125 M20 050 M20
050 M20075 150 M25 075 M25
100 M32100
M32125
Size 3 8265/63
050 125 M20 050 M20 050 M20 050 M25
050 M20075 150 M25 075 M25 075 M25 075
100 200 M32100
M32 100 M32 M20125
Size 4 8265/64
050 125 M20 050 125 M20 050 125 M20 050 125 050 M20
075 150 M25 075 150 M25 075 150 M25 075 M20 075 M25
100 200 M32 100 M32 100 M32 100M25
100 M32M32
Size 5 8265/65
050 125 M20 050 125 M20 050 125 M20 050 125 050 M20
075 150 M25 075 150 M25 075 150 M25 075 M20 075 M25
100200
M32 100 M32 100 M32 100M25
100 M32250 M32
Size 6 8265/66
050 125 M20 050 125 M20 050 125 M20 050 125 M20 050 125 M20
075 150 M25 075 150 M25 075 150 M25 075 150 M25 075 150 M25
100200
M32 100200
M32 100 200 M32 100 M32 100 M32250 250
Image 1
Image 2 Image 3
Image 4 Image 5
Enclosure Side Diagram Quick Ship - GUBox (8265) With Entries Ordering Instructions1. Select the Enclosure from pages J2 (Enclosures with Blank Cover) or J3 (Enclosures with
Window Cover).2. Select which side of the enclosure should have an entry from Figure 1 (Choices are A – Left
Side, B – Right Side, C – Top, D – Bottom).3. Select the general location of the entry from Figure 2. The images provide an Alpha indicator
noting a general location. These general arrangements have been pre-defined based upon the enclosure size and entry diameter.
4. Select the Entry Diameter and Thread Form from Figure 2. Locations “A” – “R” as shown in Figure 2. NPT Thread - Diameters ½” – 2.5”, Metric Thread Diameter M20, M25, M32. To qualify for the Quick Ship Program the entry specified must be defined in Figure 2 at the grid junction of the enclosure size (noted on the left column) in combination with arrangement image (across the top row). If more than one entry is required on a particular side of the enclosure only one arrangement image per side may be specified. For arrangement requirements not shown in Figure 2, please consult the more detailed entry instructions provided on pages J6 & J7 which details centerline to centerline entry instructions or contact the factory.
5. Repeat Steps 2-4 for each Entry desired
Figure 1:
Figure 2:
Description Size 4 enclosure with window cover with a ¾” entry on the bottom of the enclosure in the lower left corner and a M20 entry on the right side in the center
Complete Part # 8265/64-0020-DJ075-BAM20 Step 1: 8265/64-0020
(Select enclosures from pages J2-J3)
Step 2:D (Bottom side of enclosure)
Step 3: J (Lower left location from Image 4)
Step 4: 075
Step 5: Repeat for any other entries desiredStep 2.1: B
(Right side of enclosure)
Step 2.3: A (Center location from Image 1)
Step 2.4: M20
Ordering Logic
EXPLOSION & DUST IGNITION PROOF THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
ENCLOSURES
J4
- Series 8265
J5
ENCLOSURES
EXPLOSION PROOF & DUST IGNITION PROOF THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
- Series 8265
5
8265 Maximum Number of Entry Openings Per Side
Entry Size Enclosure8265/61
Enclosure8265/62
Enclosure8265/63
Enclosure8265/64
Enclosure8265/65
Enclosure8265/66
1/2” NPT 2 4 9 18 12 39
3/4” NPT 1 3 6 16 9 28
1” NPT 1 2 5 9 6 20
1-1/4” NPT - 2 3 6 4 12
1-1/2” NPT - 1 2 5 3 8
2” NPT - - 1 3 2 6
2-1/2” NPT - - - - 1 4
3” NPT - - - - 1 2
M10 x 1.5 3 3 8 16 18 48
M14 x 1.5 2 3 8 16 18 48
M15 x 1.5 2 3 8 16 18 48
M16 x 1.5 2 3 8 16 18 48
M20 x 1.5 1 3 8 16 18 28
M25 x 1.5 1 2 4 9 9 16
M32 x 1.5 1 2 3 6 8 11
M33 x 1.5 1 1 2 4 5 11
M36 x 1.5 - 1 2 4 5 8
M40 x 1.5 - 1 2 4 5 8
M42 x 1.5 - - 1 3 3 8
M48 x 1.5 - - 1 3 3 8
M50 x 1.5 - - 1 3 3 5
M56 x 1.5 - - 1 1 2 5
M63 x 1.5 - - 1 1 2 3
M75 x 1.5 - - 1 1 1 2
THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
ENCLOSURES
J6
- Series 8265
Required Center-To-Center Spacing For Entry Openings
Minimum distance “ P” in inch (mm) between entries of different sizes
Metricor NPT
M10x1.5M14x1.5M15x1.5M16x1.5
M20x1.51/2"
M24x1.5M25x1.5
3/4”*
M32x1.51"
M33x1.5M36x1.5M40x1.5
1-1/4"
M42x1.5M48x1.5M50x1.5
1-1/2"
M56x1.5M63x1.5
2"
M75x1.52-1/2"
M90x1.5M105x1.5
3"
M10x1.5M14x1.5M15x1.5M16x1.5
1.18(30)
M20x1.51/2"
1.18(30)
1.18(30)
M24x1.5M25x1.5
3/4"*
1.38(35)
1.38(35)
1.57(39.9)
M32x1.51"
1.49(37.8)
1.49(37.8
1.68(42.7)
1.79(45.5)
M33x1.5M36x1.5M40x1.5
1-1/4"
1.68(42.7)
1.68(42.7)
1.88(47.7)
1.99(50.5)
2.18(55.4)
M42x1.5M48x1.5M50x1.5
1-1/2"
1.79(45.5)
1.79(45.5)
1.99(50.5)
2.10(53.3)
2.29(58.2)
3.35(85.1)
M56x1.5M63x1.5
2"
2.12(53.8)
2.12(53.8)
2.31(58.8)
2.43(61.6)
2.62(66.5)
2.73(69.3)
3.06(77.6)
M75x1.52-1/2"
3.38(60.5)
3.38(60.5)
2.58(65.5)
2.69(68.3)
2.88(73.2)
2.99(76)
3.32(84.3)
3.58(91)
M90x1.5M1 05x1.5
3"
2.99(76)
2.99(76)
3.19(81)
3.29(83.5)
3.53(89.7)
3.66(93)
4.13(104.8)
4.37(111)
N/A
* NPT or NPSM
Area for Conduit/Gland Openings
Enclosure Body
Area for Conduit/Gland Openings
Length (A)inches (mm)
Width (B)inches (mm)
Height over mounting surface (C) inches (mm)
8265/61 2.20 (56) 2.20 (56) 0.86 (22)
8265/62 3.94 (100) 1.89 (48) 0.95 (24)
8265/63 3.94 (100) 3.50 (89) 0.95 (24)
8265/64 5.51 (140) 5.35 (136) 1.02 (26)
8265/65 6.29 (160) 5.11 (130) 1.10 (28)
8265/66 8.31 (211) 6.58 (167) 1.26 (32)
For P dimensions see page J4P/2 is tthe half distance between two entries of the same size
J7
ENCLOSURESTHREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
- Series 8265
Use only the following original spare parts and accessories, any others would invalidate the certification and warranty.
Item Image Description Article Number
Threaded Cover w/o Window Enclosure: 8265/61-0000 208861
Enclosure: 8265/62-0000 143468
Enclosure: 8265/63-0000 143470
Enclosure: 8265/64-0000 143472
Enclosure: 8265/65-0000 143474
Enclosure: 8265/66-0000 143476
Threaded Cover with Window Enclosure: 8265/61-0020 Viewable Diameter of window: 2.2” (56 mm) 211039
Enclosure: 8265/62-0020 Viewable Diameter of window: 3.86” (98 mm) 143454
Enclosure: 8265/63-0020Viewable Diameter of window: 5.35” (136 mm) 143455
Enclosure: 8265/64-0020Viewable Diameter of window: 7.08” (180 mm) 143456
Enclosure: 8265/65-0020Viewable Diameter of window: 7.40” (188 mm) 211043
Enclosure: 8265/66-0020Viewable Diameter of window: 7.40” (188 mm) 201890
Mounting Plate Enclosure: 8265/61-**** 208862
Enclosure: 8265/62-**** 143484
Enclosure: 8265/63-**** 143485
Enclosure: 8265/64-**** 143486
Enclosure: 8265/65-**** 143487
Enclosure: 8265/66-**** 143488
O-Ring Enclosure: 8265/61-**** 211270
Enclosure: 8265/62-**** 221717
Enclosure: 8265/63-**** 221718
Enclosure: 8265/64-**** 221719
Enclosure: 8265/65-**** 211271
Enclosure: 8265/66-**** 221720
DIN Rails for Line-up Terminals
TS 15 for enclosure 8265/61 212425
TS 35 for enclosure 8265/61 212424
TS 15 for enclosure 8265/62 143497
TS 35 for enclosure 8265/62 143498
TS 15 for enclosure 8265/63 137902
TS 35 for enclosure 8265/63 137970
G 32 for enclosure 8265/63 137939
TS 15 for enclosure 8265/64 137908
TS 35 for enclosure 8265/64 137976
G 32 for enclosure 8265/64 137945
TS 15 for enclosure 8265/65 212427
TS 35 for enclosure 8265/65 212426
G 32 for enclosure 8265/65 212428
TS 15 for enclosure 8265/66 166448
TS 35 for enclosure 8265/66 166449
G 32 for enclosure 8265/66 166450
Set Screw M5 x16 mm- Allen Screw with point to secure the cover 110216
Handle To open the enclosure cover (for sizes 1, 2, 3 & 4 - requires 2 to open enclosure)
142059
Handle To open the enclosure cover (for sizes 5 & 6 - requires 2 to open enclosure) 221927
THREADED ENCLOSURES
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
ENCLOSURES
J8
- Series 8265
Enclosure 8265/6.-0000, without window
Usable Internal Dimensions: c x c x i
Enclosure 8265/6.-0020, with window
Usable Internal Dimensions: c x c x n
l l
Dimensions in inches (mm)
Type a b c d e f g h i j k l m n
8265/614.92
(125)
4.33
(110)
4.21
(107)
5.91
(150)
0.22
(5.8)
0.22
(5.8)
5.19
(132)
3.20
(81.5)
3.60
(91.5)
0.511
(13)
0.31
(8)
0.41
(10.5)
3.27
(83)
3.60
(91.5)
8265/626.10
(155)
5.51
(140)
5.16
(131)
7.56
(192)
0.28
(7)
0.28
(7)
5.20
(132)
3.05
(77.5)
3.66
(93)
0.47
(12)
0.51
(13)
0.45
(11.5)
4.13
105)
3.25
(82.5)
8265/637.68
(195)
6.77
(172)
6.73
(171)
9.21
(234)
0.35
(9)
0.35
(9)
6.77
(172)
4.62
(117.5)
5.24
(133)
0.51
(13)
0.51
(13)
0.61
(15.5)
5.55
(141)
4.82
(122.5)
8265/649.29
(236)
8.27
(210)
8.35
(212)
11.38
(289)
0.43
(11)
0.43
(11)
8.94
(227)
6.63
(168.5)
7.26
(184.5)
0.51
(13)
0.51
(13)
0.61
(15.5)
7.32
(186)
6.83
(1735)
8265/6511.22
(285)
10.08
(256)
9.84
(250)
13.70
(348)
0.43
(11)
0.43
(11)
8.93
(227)
6.63
(168.5)
6.36
(161.5)
0.75
(19)
0.53
(13.5)
0.64
(16.5)
8.77
(223)
6.35
(161.5)
8265/6613.2
(335)
12.3
(312)
11.8
(300)
16.1
(410)
0.45
(11.5)
0.45
(11.5)
11
(281)
8.12
(206.5)
9
(229.5)
0.71
(18)
0.69
(17.5)
0.61
(15.5)
7.32
(186)
8.6
(218.5)
THE STRONGEST LINK.
R. STAHL is pleased to announce its QUICKSHIP program. The QUICKSHIP program targets select product ranges, including the GUBox. This program commits to ship GUBox products with no modifications and standard entries as defined on pages J4-J5 of the brochure within 24 hours from order placement to be delivered in less than 5 days..
PUT US TO THE TEST!
R. STAHL, Inc. 13259 N. Promenade Blvd Stafford, TX 77477 USA+1 800 782 4357 rstahl.com
R. STAHL, Ltd. 8925 51st Ave NWSuite 303Edmonton, AB T6E 5J3Canada +1 780 490-4912
LR01
2620
21
OUR NEW QUICK SHIP PROGRAM