+ All Categories
Home > Documents > Series FXS Solar Injection System...1/8" Plunger Min Flow Rate: 0.34 [GPO] Max Pressure: 12,000...

Series FXS Solar Injection System...1/8" Plunger Min Flow Rate: 0.34 [GPO] Max Pressure: 12,000...

Date post: 10-Jul-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
1
How to use this table: Determine the solar insolation factor based on system install location. In the appropriate insolation factor column, find a maximum flow rate and discharge pressure value that are both equal to or greater than the application requirement. Confirm that the minimum flow rate of that plunger is equal to or less than the application requirement. Please contact CheckPoint for assistance or to discuss a customized solution. www.cppumps.com PERFORMANCE DATA Series FXS Solar Injection System FXS Performance 2 Panel Data RevA
Transcript
Page 1: Series FXS Solar Injection System...1/8" Plunger Min Flow Rate: 0.34 [GPO] Max Pressure: 12,000 [PSIG] 3/16" Plunger Min Flow Rate: 0.78 Max Pressure: 7,500 [PSIG] 1/4" Plunger Min

How to use this table: • Determine the solar insolation factor based on system install location. • In the appropriate insolation factor column, find a maximum flow rate and discharge pressure value that are both equal to or greater than the application requirement. • Confirm that the minimum flow rate of that plunger is equal to or less than the application requirement. • Please contact CheckPoint for assistance or to discuss a customized solution.

www.cppumps.com

PERFORMANCE DATA

Series FXS Solar Injection System

FXS Performance 2 Panel Data RevA

Recommended