9500 Series Telescopic Crane
9500 Series Telescopic Crane
Let our telescopic cranes take on the heavy lifting. The IMT 9500 Series telescopic crane has a maximum lifting capacity of 9500 lb (4309.1 kg) and a horizontal boom reach of 30' (9.1 m) — the longest in the industry. Featuring the Penta BoomTM design, this crane is built for strength and control, and when combined with an IMT Dominator® mechanics truck, creates the ultimate service and maintenance truck.
Penta Boom DesignDifferent material thickness to address structural requirements, while controlling the weight of the crane.
Standard Features
• 30' (9.1 m) of boom reach• Fully proportional “pistol grip” radio remote control• Flip sheave boom tip• Boom angle -10° to +80° (-0.2 to 1.4 rad)• Increased capacity• Patented hook stow• Patented anti-two-block device• Radio remote control receiver
Options
• 25' (7.6 m)• Boom tip lights
Body Sizes
• Dominator II
In addition to these specifications, heavy-duty electrical and cooling systems are required. It is recommended that the vehicle be equipped with an engine tachometer, auxiliary brake lock, and power steering.
Minimum Chassis Specifications
Chassis Style Conventional Cab
Front Axle Rating (GAWR) 7500 lb (3401.9 kg)
Rear Axle Rating (GAWR) 17,000 lb (7711 kg)
Wheelbase 154" (391 cm)
Cab-to-Axle 84" (213 cm)
Resistance to Bending Moment Minimum 1,200,000 in-lb (13,825 kg-m)
Frame Section Modulus 14.2 cu in (232.7 cm3)
Gross Vehicle Weight Rating 24,500 lb (11,113 kg)
Radio Remote ControlOur pistol grip handle is ergonomic while increasing comfort and decreasing hand fatigue and is available with joystick or toggle switch controls.
Radio Remote Control ReceiverTo simplify troubleshooting and increase productivity, our radio remote control receiver provides an LED readout detailing error codes. It also uses programmable logic for precise control of individual functions.
Flip SheaveOur unique flip sheave allows operators to work in tighter areas by reducing the boom tip profile height by 8" (20.3 cm).
Radio Receiver
Hook Stow Cable Guide
Anti-two-block Device
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
11'-6"(3.5 m)
18'-0"(5.5 m)
23'-10"(7.3 m)
75°
60°
45°
30°
15°
0°
90254095
95004310
66503015
45152050
36651660
31851445
29251325
26401195
90254095
61302780
49902265
44001995
39901810
36101635
58452650
64602930
70503195
78853575
95004310 9025
4095
80°
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kglb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg95004310
13'-0"(4.0 m)
21'-6"(6.6 m)
30'-0"(9.1 m)
75°
60°
45°
30°
15°
0°
79503605
95004310
95004310
58402650
33601525
27101230
23701075
2070940
1800816
82603745
54002450
43101955
37301690
33201505
30001360
52502380
57902625
63202865
71803255
95004310 8150
3695
80°
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kglb
kg
lb
kg
lb
kg
lb
kg
lb
kg
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position. • Maximum one-part line weight is 5500 lb (2500 kg)
• The weight of load-handling devices is part of the load lifted and must be deducted from the rated capacity
• Maximum one-part line weight is 5500 lb (2500 kg)• The weight of load-handling devices is part of the load lifted and must
be deducted from the rated capacity
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.
25' Load Chart
30' Load Chart
9500 Series Specifications 25' Boom Crane Rating* 67,000 ft-lb (9.3 tm)
Max. Capacity 9500 lb (4309.1 kg)
Max. Horizontal Reach (with flip sheave up) 24' 8" (7.5 m) Max. Horizontal Reach (with flip sheave down) 23' 10" (7.3 m)
Max. Capacity @ Max. Reach 2640 lb (1195 kg)
Fully Retracted 11' 4" (3.5 m)
Hydraulic Extensions 75" x 2 (190.5 cm x 2)
Lifting Height (with flip sheave down) 26' (7.9 m)
Crane Weight 2230 lb (1034.2 kg)
Crane Storage Height 41.2" (104.7 cm)
Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
43.8" (111.3 cm)21.4" (54.3 cm)
Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm)
Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min)
Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm)
Rotational Torque 9000 ft-lb (1.3 tm)
Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
9500 Series Specifications 30' Boom Crane Rating* 68,000 ft-lb (9.5 tm)
Max. Capacity 9500 lb (4309.1 kg)
Max. Horizontal Reach (with flip sheave up) 30' 10" (9.3 m)
Max. Horizontal Reach (with flip sheave down) 30' (9.1 m)
Max. Capacity @ Max. Reach 1800 lb (816.4 kg)
Fully Retracted 13' (4 m)
Hydraulic Extensions 102" x 2 (259 cm x 2)
Lifting Height (with flip sheave down) 32' 1" (9.8 m)
Crane Weight 2450 lb (1088.6 kg)
Crane Storage Height 41.2" (104.7 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
54.5" (138.3 cm)21.4" (54.3 cm)
Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm)
Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min)
Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm)
Rotational Torque 9000 ft-lb (1.3 tm)
Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
41.2"(104.7 cm)
8.7"(22.1 cm)
DIMENSIONAL DRAWING - 9500 - 10000 LONG
20.3"(51.6 cm)
52.6" (133.6 cm)
47.8" (121.4 cm) 50.4" (128 cm)
175.1" (444.7 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
18.1"(46 cm)
17.75"(45 cm)
Center of Gravity
6.5"(16.5 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
41.2"(104.7 cm)
8.7"(22.1 cm)
DIMENSIONAL DRAWING - 9500 - 10000 LONG
20.3"(51.6 cm)
52.6" (133.6 cm)
47.8" (121.4 cm) 50.4" (128 cm)
175.1" (444.7 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
18.1"(46 cm)
17.75"(45 cm)
Center of Gravity
6.5"(16.5 cm)
40.6"(103 cm)
8.7"(22 cm)
8.1"(20.6 cm)
53.9" (137 cm)Center of Gravity
162" (411.5 cm)
17.75"(45 cm)
41.4" (105 cm)
20.2"(51 cm)
35.2"(89.4 cm)
23.4"(59.3 cm)
18.1"(46 cm)14.75"
(37.5 cm)
14.75"(37.5 cm)
20.8" (52.8 cm)
29.6"(75.2 cm)
23.4"(59.3 cm)
20.8" (52.8 cm)
41.2"(104.7 cm)
8.7"(22.1 cm)
DIMENSIONAL DRAWING - 9500 - 10000 LONG
20.3"(51.6 cm)
52.6" (133.6 cm)
47.8" (121.4 cm) 50.4" (128 cm)
175.1" (444.7 cm)
14.75"(37.5 cm)
14.75"(37.5 cm)
18.1"(46 cm)
17.75"(45 cm)
Center of Gravity
6.5"(16.5 cm)29.6"
(75.2 cm)
Nothing Says Commitment Like The Diamond.™ IMT has been meeting the needs of our customers for over 50 years, and none of it would have been possible without a distributor network that’s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you’re looking for reliable equipment and dependable service, remember IMT.
IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, IMT logo, Dominator, Penta Boom and NOTHING SAYS COMMITMENT LIKE THE DIAMOND are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA.© 2015 Iowa Mold Tooling Co., Inc. All Rights Reserved.
06/15
Iowa Mold Tooling Co., Inc.500 Highway 18 West Garner, Iowa 50438800-247-5958 • www.imt.com
Planetary Winch• Capacity of 6000 lb (2722 kg) powered by
high-torque hydraulic motor• Single line operating speed of 60 fpm (18.2 m/min)
under no-load conditions• Maximum two-part line capacity of 9,500 lb (4310 kg)• Equipped with 100' (30.5 m) of 7/16" (1.1 cm) of
6 x 25 FW PRF RRL IWRC XIPS wire rope• Anti-two-block prevents the snatch block assembly
from coming in contact with boom tip• Speed of winch is 60 fpm (0.3 m/sec)• Meets ANSI B30.5 standards
Hydraulic System• Open-centered, full pressure system• System requires 10 gpm (37.9 L/min) optimum oil
flow at 3000 psi (206.8 bar)• Fully proportional control valve with “pistol grip” radio
remote control system• Includes radio elimination cable, hydraulic oil reservoir,
and suction and return line filters
Power Source• Power provided by integral-mounted hydraulic
pump and PTO• Min. requirement is 23.5 hp (17.5 kW) based on
10 gpm at 3000 psi (37.9 L/min at 206.8 bar)• Other standard power sources can be utilized
Cylinder Holding Valves• All cylinders equipped with integral-mounted
counterbalance valves• Prevent sudden cylinder collapse in case of
component failure
Rotation System• Consists of a worm gear and turntable gear bearing• Powered by a high-torque hydraulic motor • Standard rotation is 400° (6.98 rad)• Speed rotation is 30 seconds
Excessive Load Limit System (ELLS)• Pressure transducer used to sense overload• When overloaded, the following functions are
stopped: boom down, extension out, and winch up